Loading...
Note: File does not exist in v6.13.7.
1/*
2 * Device Tree file for Marvell Armada 370 evaluation board
3 * (DB-88F6710-BP-DDR3)
4 *
5 * Copyright (C) 2012 Marvell
6 *
7 * Lior Amsalem <alior@marvell.com>
8 * Gregory CLEMENT <gregory.clement@free-electrons.com>
9 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
10 *
11 * This file is dual-licensed: you can use it either under the terms
12 * of the GPL or the X11 license, at your option. Note that this dual
13 * licensing only applies to this file, and not this project as a
14 * whole.
15 *
16 * a) This file is free software; you can redistribute it and/or
17 * modify it under the terms of the GNU General Public License as
18 * published by the Free Software Foundation; either version 2 of the
19 * License, or (at your option) any later version.
20 *
21 * This file is distributed in the hope that it will be useful
22 * but WITHOUT ANY WARRANTY; without even the implied warranty of
23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
24 * GNU General Public License for more details.
25 *
26 * Or, alternatively
27 *
28 * b) Permission is hereby granted, free of charge, to any person
29 * obtaining a copy of this software and associated documentation
30 * files (the "Software"), to deal in the Software without
31 * restriction, including without limitation the rights to use
32 * copy, modify, merge, publish, distribute, sublicense, and/or
33 * sell copies of the Software, and to permit persons to whom the
34 * Software is furnished to do so, subject to the following
35 * conditions:
36 *
37 * The above copyright notice and this permission notice shall be
38 * included in all copies or substantial portions of the Software.
39 *
40 * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
41 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
42 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
43 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
44 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
45 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
46 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
47 * OTHER DEALINGS IN THE SOFTWARE.
48 *
49 * Note: this Device Tree assumes that the bootloader has remapped the
50 * internal registers to 0xf1000000 (instead of the default
51 * 0xd0000000). The 0xf1000000 is the default used by the recent,
52 * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
53 * boards were delivered with an older version of the bootloader that
54 * left internal registers mapped at 0xd0000000. If you are in this
55 * situation, you should either update your bootloader (preferred
56 * solution) or the below Device Tree should be adjusted.
57 */
58
59/dts-v1/;
60#include "armada-370.dtsi"
61
62/ {
63 model = "Marvell Armada 370 Evaluation Board";
64 compatible = "marvell,a370-db", "marvell,armada370", "marvell,armada-370-xp";
65
66 chosen {
67 stdout-path = "serial0:115200n8";
68 };
69
70 memory {
71 device_type = "memory";
72 reg = <0x00000000 0x40000000>; /* 1 GB */
73 };
74
75 soc {
76 ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
77 MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
78 MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
79
80 internal-regs {
81 serial@12000 {
82 status = "okay";
83 };
84 sata@a0000 {
85 nr-ports = <2>;
86 status = "okay";
87 };
88
89 mdio {
90 pinctrl-0 = <&mdio_pins>;
91 pinctrl-names = "default";
92 phy0: ethernet-phy@0 {
93 reg = <0>;
94 };
95
96 phy1: ethernet-phy@1 {
97 reg = <1>;
98 };
99 };
100
101 ethernet@70000 {
102 pinctrl-0 = <&ge0_rgmii_pins>;
103 pinctrl-names = "default";
104 status = "okay";
105 phy = <&phy0>;
106 phy-mode = "rgmii-id";
107 };
108 ethernet@74000 {
109 pinctrl-0 = <&ge1_rgmii_pins>;
110 pinctrl-names = "default";
111 status = "okay";
112 phy = <&phy1>;
113 phy-mode = "rgmii-id";
114 };
115
116 i2c@11000 {
117 pinctrl-0 = <&i2c0_pins>;
118 pinctrl-names = "default";
119 clock-frequency = <100000>;
120 status = "okay";
121 audio_codec: audio-codec@4a {
122 #sound-dai-cells = <0>;
123 compatible = "cirrus,cs42l51";
124 reg = <0x4a>;
125 };
126 };
127
128 audio-controller@30000 {
129 pinctrl-0 = <&i2s_pins2>;
130 pinctrl-names = "default";
131 status = "okay";
132 };
133
134 mvsdio@d4000 {
135 pinctrl-0 = <&sdio_pins1>;
136 pinctrl-names = "default";
137 /*
138 * This device is disabled by default, because
139 * using the SD card connector requires
140 * changing the default CON40 connector
141 * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a
142 * different connector
143 * "DB-88F6710_MPP_RGMII_SD_Jumper".
144 */
145 status = "disabled";
146 /* No CD or WP GPIOs */
147 broken-cd;
148 };
149
150 usb@50000 {
151 status = "okay";
152 };
153
154 usb@51000 {
155 status = "okay";
156 };
157
158 spi0: spi@10600 {
159 pinctrl-0 = <&spi0_pins2>;
160 pinctrl-names = "default";
161 status = "okay";
162
163 spi-flash@0 {
164 #address-cells = <1>;
165 #size-cells = <1>;
166 compatible = "mx25l25635e", "jedec,spi-nor";
167 reg = <0>; /* Chip select 0 */
168 spi-max-frequency = <50000000>;
169 };
170 };
171
172 nand@d0000 {
173 status = "okay";
174 num-cs = <1>;
175 marvell,nand-keep-config;
176 marvell,nand-enable-arbiter;
177 nand-on-flash-bbt;
178
179 partitions {
180 compatible = "fixed-partitions";
181 #address-cells = <1>;
182 #size-cells = <1>;
183
184 partition@0 {
185 label = "U-Boot";
186 reg = <0 0x800000>;
187 };
188 partition@800000 {
189 label = "Linux";
190 reg = <0x800000 0x800000>;
191 };
192 partition@1000000 {
193 label = "Filesystem";
194 reg = <0x1000000 0x3f000000>;
195 };
196 };
197 };
198 };
199
200 pcie-controller {
201 status = "okay";
202 /*
203 * The two PCIe units are accessible through
204 * both standard PCIe slots and mini-PCIe
205 * slots on the board.
206 */
207 pcie@1,0 {
208 /* Port 0, Lane 0 */
209 status = "okay";
210 };
211
212 pcie@2,0 {
213 /* Port 1, Lane 0 */
214 status = "okay";
215 };
216 };
217 };
218
219 sound {
220 compatible = "simple-audio-card";
221 simple-audio-card,name = "Armada 370 DB Audio";
222 simple-audio-card,mclk-fs = <256>;
223 simple-audio-card,widgets =
224 "Headphone", "Out Jack",
225 "Line", "In Jack";
226 simple-audio-card,routing =
227 "Out Jack", "HPL",
228 "Out Jack", "HPR",
229 "AIN1L", "In Jack",
230 "AIN1L", "In Jack";
231 status = "okay";
232
233 simple-audio-card,dai-link@0 {
234 format = "i2s";
235 cpu {
236 sound-dai = <&audio_controller 0>;
237 };
238
239 codec {
240 sound-dai = <&audio_codec>;
241 };
242 };
243
244 simple-audio-card,dai-link@1 {
245 format = "i2s";
246 cpu {
247 sound-dai = <&audio_controller 1>;
248 };
249
250 codec {
251 sound-dai = <&spdif_out>;
252 };
253 };
254
255 simple-audio-card,dai-link@2 {
256 format = "i2s";
257 cpu {
258 sound-dai = <&audio_controller 1>;
259 };
260
261 codec {
262 sound-dai = <&spdif_in>;
263 };
264 };
265 };
266
267 spdif_out: spdif-out {
268 #sound-dai-cells = <0>;
269 compatible = "linux,spdif-dit";
270 };
271
272 spdif_in: spdif-in {
273 #sound-dai-cells = <0>;
274 compatible = "linux,spdif-dir";
275 };
276};