Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * spcp8x5 USB to serial adaptor driver
4 *
5 * Copyright (C) 2010-2013 Johan Hovold (jhovold@gmail.com)
6 * Copyright (C) 2006 Linxb (xubin.lin@worldplus.com.cn)
7 * Copyright (C) 2006 S1 Corp.
8 *
9 * Original driver for 2.6.10 pl2303 driver by
10 * Greg Kroah-Hartman (greg@kroah.com)
11 * Changes for 2.6.20 by Harald Klein <hari@vt100.at>
12 */
13#include <linux/kernel.h>
14#include <linux/errno.h>
15#include <linux/slab.h>
16#include <linux/tty.h>
17#include <linux/tty_driver.h>
18#include <linux/tty_flip.h>
19#include <linux/module.h>
20#include <linux/spinlock.h>
21#include <linux/usb.h>
22#include <linux/usb/serial.h>
23
24#define DRIVER_DESC "SPCP8x5 USB to serial adaptor driver"
25
26#define SPCP825_QUIRK_NO_UART_STATUS 0x01
27#define SPCP825_QUIRK_NO_WORK_MODE 0x02
28
29#define SPCP8x5_007_VID 0x04FC
30#define SPCP8x5_007_PID 0x0201
31#define SPCP8x5_008_VID 0x04fc
32#define SPCP8x5_008_PID 0x0235
33#define SPCP8x5_PHILIPS_VID 0x0471
34#define SPCP8x5_PHILIPS_PID 0x081e
35#define SPCP8x5_INTERMATIC_VID 0x04FC
36#define SPCP8x5_INTERMATIC_PID 0x0204
37#define SPCP8x5_835_VID 0x04fc
38#define SPCP8x5_835_PID 0x0231
39
40static const struct usb_device_id id_table[] = {
41 { USB_DEVICE(SPCP8x5_PHILIPS_VID , SPCP8x5_PHILIPS_PID)},
42 { USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)},
43 { USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)},
44 { USB_DEVICE(SPCP8x5_008_VID, SPCP8x5_008_PID)},
45 { USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID),
46 .driver_info = SPCP825_QUIRK_NO_UART_STATUS |
47 SPCP825_QUIRK_NO_WORK_MODE },
48 { } /* Terminating entry */
49};
50MODULE_DEVICE_TABLE(usb, id_table);
51
52/* spcp8x5 spec register define */
53#define MCR_CONTROL_LINE_RTS 0x02
54#define MCR_CONTROL_LINE_DTR 0x01
55#define MCR_DTR 0x01
56#define MCR_RTS 0x02
57
58#define MSR_STATUS_LINE_DCD 0x80
59#define MSR_STATUS_LINE_RI 0x40
60#define MSR_STATUS_LINE_DSR 0x20
61#define MSR_STATUS_LINE_CTS 0x10
62
63/* verdor command here , we should define myself */
64#define SET_DEFAULT 0x40
65#define SET_DEFAULT_TYPE 0x20
66
67#define SET_UART_FORMAT 0x40
68#define SET_UART_FORMAT_TYPE 0x21
69#define SET_UART_FORMAT_SIZE_5 0x00
70#define SET_UART_FORMAT_SIZE_6 0x01
71#define SET_UART_FORMAT_SIZE_7 0x02
72#define SET_UART_FORMAT_SIZE_8 0x03
73#define SET_UART_FORMAT_STOP_1 0x00
74#define SET_UART_FORMAT_STOP_2 0x04
75#define SET_UART_FORMAT_PAR_NONE 0x00
76#define SET_UART_FORMAT_PAR_ODD 0x10
77#define SET_UART_FORMAT_PAR_EVEN 0x30
78#define SET_UART_FORMAT_PAR_MASK 0xD0
79#define SET_UART_FORMAT_PAR_SPACE 0x90
80
81#define GET_UART_STATUS_TYPE 0xc0
82#define GET_UART_STATUS 0x22
83#define GET_UART_STATUS_MSR 0x06
84
85#define SET_UART_STATUS 0x40
86#define SET_UART_STATUS_TYPE 0x23
87#define SET_UART_STATUS_MCR 0x0004
88#define SET_UART_STATUS_MCR_DTR 0x01
89#define SET_UART_STATUS_MCR_RTS 0x02
90#define SET_UART_STATUS_MCR_LOOP 0x10
91
92#define SET_WORKING_MODE 0x40
93#define SET_WORKING_MODE_TYPE 0x24
94#define SET_WORKING_MODE_U2C 0x00
95#define SET_WORKING_MODE_RS485 0x01
96#define SET_WORKING_MODE_PDMA 0x02
97#define SET_WORKING_MODE_SPP 0x03
98
99#define SET_FLOWCTL_CHAR 0x40
100#define SET_FLOWCTL_CHAR_TYPE 0x25
101
102#define GET_VERSION 0xc0
103#define GET_VERSION_TYPE 0x26
104
105#define SET_REGISTER 0x40
106#define SET_REGISTER_TYPE 0x27
107
108#define GET_REGISTER 0xc0
109#define GET_REGISTER_TYPE 0x28
110
111#define SET_RAM 0x40
112#define SET_RAM_TYPE 0x31
113
114#define GET_RAM 0xc0
115#define GET_RAM_TYPE 0x32
116
117/* how come ??? */
118#define UART_STATE 0x08
119#define UART_STATE_TRANSIENT_MASK 0x75
120#define UART_DCD 0x01
121#define UART_DSR 0x02
122#define UART_BREAK_ERROR 0x04
123#define UART_RING 0x08
124#define UART_FRAME_ERROR 0x10
125#define UART_PARITY_ERROR 0x20
126#define UART_OVERRUN_ERROR 0x40
127#define UART_CTS 0x80
128
129struct spcp8x5_private {
130 unsigned quirks;
131 spinlock_t lock;
132 u8 line_control;
133};
134
135static int spcp8x5_probe(struct usb_serial *serial,
136 const struct usb_device_id *id)
137{
138 usb_set_serial_data(serial, (void *)id);
139
140 return 0;
141}
142
143static int spcp8x5_port_probe(struct usb_serial_port *port)
144{
145 const struct usb_device_id *id = usb_get_serial_data(port->serial);
146 struct spcp8x5_private *priv;
147
148 priv = kzalloc(sizeof(*priv), GFP_KERNEL);
149 if (!priv)
150 return -ENOMEM;
151
152 spin_lock_init(&priv->lock);
153 priv->quirks = id->driver_info;
154
155 usb_set_serial_port_data(port, priv);
156
157 port->port.drain_delay = 256;
158
159 return 0;
160}
161
162static void spcp8x5_port_remove(struct usb_serial_port *port)
163{
164 struct spcp8x5_private *priv;
165
166 priv = usb_get_serial_port_data(port);
167 kfree(priv);
168}
169
170static int spcp8x5_set_ctrl_line(struct usb_serial_port *port, u8 mcr)
171{
172 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
173 struct usb_device *dev = port->serial->dev;
174 int retval;
175
176 if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS)
177 return -EPERM;
178
179 retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
180 SET_UART_STATUS_TYPE, SET_UART_STATUS,
181 mcr, 0x04, NULL, 0, 100);
182 if (retval != 0) {
183 dev_err(&port->dev, "failed to set control lines: %d\n",
184 retval);
185 }
186 return retval;
187}
188
189static int spcp8x5_get_msr(struct usb_serial_port *port, u8 *status)
190{
191 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
192 struct usb_device *dev = port->serial->dev;
193 u8 *buf;
194 int ret;
195
196 if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS)
197 return -EPERM;
198
199 buf = kzalloc(1, GFP_KERNEL);
200 if (!buf)
201 return -ENOMEM;
202
203 ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
204 GET_UART_STATUS, GET_UART_STATUS_TYPE,
205 0, GET_UART_STATUS_MSR, buf, 1, 100);
206 if (ret < 1) {
207 dev_err(&port->dev, "failed to get modem status: %d\n", ret);
208 if (ret >= 0)
209 ret = -EIO;
210 goto out;
211 }
212
213 dev_dbg(&port->dev, "0xc0:0x22:0:6 %d - 0x02%x\n", ret, *buf);
214 *status = *buf;
215 ret = 0;
216out:
217 kfree(buf);
218
219 return ret;
220}
221
222static void spcp8x5_set_work_mode(struct usb_serial_port *port, u16 value,
223 u16 index)
224{
225 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
226 struct usb_device *dev = port->serial->dev;
227 int ret;
228
229 if (priv->quirks & SPCP825_QUIRK_NO_WORK_MODE)
230 return;
231
232 ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
233 SET_WORKING_MODE_TYPE, SET_WORKING_MODE,
234 value, index, NULL, 0, 100);
235 dev_dbg(&port->dev, "value = %#x , index = %#x\n", value, index);
236 if (ret < 0)
237 dev_err(&port->dev, "failed to set work mode: %d\n", ret);
238}
239
240static int spcp8x5_carrier_raised(struct usb_serial_port *port)
241{
242 u8 msr;
243 int ret;
244
245 ret = spcp8x5_get_msr(port, &msr);
246 if (ret || msr & MSR_STATUS_LINE_DCD)
247 return 1;
248
249 return 0;
250}
251
252static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on)
253{
254 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
255 unsigned long flags;
256 u8 control;
257
258 spin_lock_irqsave(&priv->lock, flags);
259 if (on)
260 priv->line_control = MCR_CONTROL_LINE_DTR
261 | MCR_CONTROL_LINE_RTS;
262 else
263 priv->line_control &= ~ (MCR_CONTROL_LINE_DTR
264 | MCR_CONTROL_LINE_RTS);
265 control = priv->line_control;
266 spin_unlock_irqrestore(&priv->lock, flags);
267 spcp8x5_set_ctrl_line(port, control);
268}
269
270static void spcp8x5_init_termios(struct tty_struct *tty)
271{
272 tty_encode_baud_rate(tty, 115200, 115200);
273}
274
275static void spcp8x5_set_termios(struct tty_struct *tty,
276 struct usb_serial_port *port,
277 const struct ktermios *old_termios)
278{
279 struct usb_serial *serial = port->serial;
280 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
281 unsigned long flags;
282 unsigned int cflag = tty->termios.c_cflag;
283 unsigned short uartdata;
284 unsigned char buf[2] = {0, 0};
285 int baud;
286 int i;
287 u8 control;
288
289 /* check that they really want us to change something */
290 if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
291 return;
292
293 /* set DTR/RTS active */
294 spin_lock_irqsave(&priv->lock, flags);
295 control = priv->line_control;
296 if (old_termios && (old_termios->c_cflag & CBAUD) == B0) {
297 priv->line_control |= MCR_DTR;
298 if (!(old_termios->c_cflag & CRTSCTS))
299 priv->line_control |= MCR_RTS;
300 }
301 if (control != priv->line_control) {
302 control = priv->line_control;
303 spin_unlock_irqrestore(&priv->lock, flags);
304 spcp8x5_set_ctrl_line(port, control);
305 } else {
306 spin_unlock_irqrestore(&priv->lock, flags);
307 }
308
309 /* Set Baud Rate */
310 baud = tty_get_baud_rate(tty);
311 switch (baud) {
312 case 300: buf[0] = 0x00; break;
313 case 600: buf[0] = 0x01; break;
314 case 1200: buf[0] = 0x02; break;
315 case 2400: buf[0] = 0x03; break;
316 case 4800: buf[0] = 0x04; break;
317 case 9600: buf[0] = 0x05; break;
318 case 19200: buf[0] = 0x07; break;
319 case 38400: buf[0] = 0x09; break;
320 case 57600: buf[0] = 0x0a; break;
321 case 115200: buf[0] = 0x0b; break;
322 case 230400: buf[0] = 0x0c; break;
323 case 460800: buf[0] = 0x0d; break;
324 case 921600: buf[0] = 0x0e; break;
325/* case 1200000: buf[0] = 0x0f; break; */
326/* case 2400000: buf[0] = 0x10; break; */
327 case 3000000: buf[0] = 0x11; break;
328/* case 6000000: buf[0] = 0x12; break; */
329 case 0:
330 case 1000000:
331 buf[0] = 0x0b; break;
332 default:
333 dev_err(&port->dev, "unsupported baudrate, using 9600\n");
334 }
335
336 /* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */
337 switch (cflag & CSIZE) {
338 case CS5:
339 buf[1] |= SET_UART_FORMAT_SIZE_5;
340 break;
341 case CS6:
342 buf[1] |= SET_UART_FORMAT_SIZE_6;
343 break;
344 case CS7:
345 buf[1] |= SET_UART_FORMAT_SIZE_7;
346 break;
347 default:
348 case CS8:
349 buf[1] |= SET_UART_FORMAT_SIZE_8;
350 break;
351 }
352
353 /* Set Stop bit2 : 0:1bit 1:2bit */
354 buf[1] |= (cflag & CSTOPB) ? SET_UART_FORMAT_STOP_2 :
355 SET_UART_FORMAT_STOP_1;
356
357 /* Set Parity bit3-4 01:Odd 11:Even */
358 if (cflag & PARENB) {
359 buf[1] |= (cflag & PARODD) ?
360 SET_UART_FORMAT_PAR_ODD : SET_UART_FORMAT_PAR_EVEN ;
361 } else {
362 buf[1] |= SET_UART_FORMAT_PAR_NONE;
363 }
364 uartdata = buf[0] | buf[1]<<8;
365
366 i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
367 SET_UART_FORMAT_TYPE, SET_UART_FORMAT,
368 uartdata, 0, NULL, 0, 100);
369 if (i < 0)
370 dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n",
371 uartdata, i);
372 dev_dbg(&port->dev, "0x21:0x40:0:0 %d\n", i);
373
374 if (cflag & CRTSCTS) {
375 /* enable hardware flow control */
376 spcp8x5_set_work_mode(port, 0x000a, SET_WORKING_MODE_U2C);
377 }
378}
379
380static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
381{
382 struct usb_serial *serial = port->serial;
383 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
384 int ret;
385
386 usb_clear_halt(serial->dev, port->write_urb->pipe);
387 usb_clear_halt(serial->dev, port->read_urb->pipe);
388
389 ret = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
390 0x09, 0x00,
391 0x01, 0x00, NULL, 0x00, 100);
392 if (ret)
393 return ret;
394
395 spcp8x5_set_ctrl_line(port, priv->line_control);
396
397 if (tty)
398 spcp8x5_set_termios(tty, port, NULL);
399
400 return usb_serial_generic_open(tty, port);
401}
402
403static int spcp8x5_tiocmset(struct tty_struct *tty,
404 unsigned int set, unsigned int clear)
405{
406 struct usb_serial_port *port = tty->driver_data;
407 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
408 unsigned long flags;
409 u8 control;
410
411 spin_lock_irqsave(&priv->lock, flags);
412 if (set & TIOCM_RTS)
413 priv->line_control |= MCR_RTS;
414 if (set & TIOCM_DTR)
415 priv->line_control |= MCR_DTR;
416 if (clear & TIOCM_RTS)
417 priv->line_control &= ~MCR_RTS;
418 if (clear & TIOCM_DTR)
419 priv->line_control &= ~MCR_DTR;
420 control = priv->line_control;
421 spin_unlock_irqrestore(&priv->lock, flags);
422
423 return spcp8x5_set_ctrl_line(port, control);
424}
425
426static int spcp8x5_tiocmget(struct tty_struct *tty)
427{
428 struct usb_serial_port *port = tty->driver_data;
429 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
430 unsigned long flags;
431 unsigned int mcr;
432 u8 status;
433 unsigned int result;
434
435 result = spcp8x5_get_msr(port, &status);
436 if (result)
437 return result;
438
439 spin_lock_irqsave(&priv->lock, flags);
440 mcr = priv->line_control;
441 spin_unlock_irqrestore(&priv->lock, flags);
442
443 result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0)
444 | ((mcr & MCR_RTS) ? TIOCM_RTS : 0)
445 | ((status & MSR_STATUS_LINE_CTS) ? TIOCM_CTS : 0)
446 | ((status & MSR_STATUS_LINE_DSR) ? TIOCM_DSR : 0)
447 | ((status & MSR_STATUS_LINE_RI) ? TIOCM_RI : 0)
448 | ((status & MSR_STATUS_LINE_DCD) ? TIOCM_CD : 0);
449
450 return result;
451}
452
453static struct usb_serial_driver spcp8x5_device = {
454 .driver = {
455 .name = "SPCP8x5",
456 },
457 .id_table = id_table,
458 .num_ports = 1,
459 .num_bulk_in = 1,
460 .num_bulk_out = 1,
461 .open = spcp8x5_open,
462 .dtr_rts = spcp8x5_dtr_rts,
463 .carrier_raised = spcp8x5_carrier_raised,
464 .set_termios = spcp8x5_set_termios,
465 .init_termios = spcp8x5_init_termios,
466 .tiocmget = spcp8x5_tiocmget,
467 .tiocmset = spcp8x5_tiocmset,
468 .probe = spcp8x5_probe,
469 .port_probe = spcp8x5_port_probe,
470 .port_remove = spcp8x5_port_remove,
471};
472
473static struct usb_serial_driver * const serial_drivers[] = {
474 &spcp8x5_device, NULL
475};
476
477module_usb_serial_driver(serial_drivers, id_table);
478
479MODULE_DESCRIPTION(DRIVER_DESC);
480MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * spcp8x5 USB to serial adaptor driver
4 *
5 * Copyright (C) 2010-2013 Johan Hovold (jhovold@gmail.com)
6 * Copyright (C) 2006 Linxb (xubin.lin@worldplus.com.cn)
7 * Copyright (C) 2006 S1 Corp.
8 *
9 * Original driver for 2.6.10 pl2303 driver by
10 * Greg Kroah-Hartman (greg@kroah.com)
11 * Changes for 2.6.20 by Harald Klein <hari@vt100.at>
12 */
13#include <linux/kernel.h>
14#include <linux/errno.h>
15#include <linux/slab.h>
16#include <linux/tty.h>
17#include <linux/tty_driver.h>
18#include <linux/tty_flip.h>
19#include <linux/module.h>
20#include <linux/spinlock.h>
21#include <linux/usb.h>
22#include <linux/usb/serial.h>
23
24#define DRIVER_DESC "SPCP8x5 USB to serial adaptor driver"
25
26#define SPCP825_QUIRK_NO_UART_STATUS 0x01
27#define SPCP825_QUIRK_NO_WORK_MODE 0x02
28
29#define SPCP8x5_007_VID 0x04FC
30#define SPCP8x5_007_PID 0x0201
31#define SPCP8x5_008_VID 0x04fc
32#define SPCP8x5_008_PID 0x0235
33#define SPCP8x5_PHILIPS_VID 0x0471
34#define SPCP8x5_PHILIPS_PID 0x081e
35#define SPCP8x5_INTERMATIC_VID 0x04FC
36#define SPCP8x5_INTERMATIC_PID 0x0204
37#define SPCP8x5_835_VID 0x04fc
38#define SPCP8x5_835_PID 0x0231
39
40static const struct usb_device_id id_table[] = {
41 { USB_DEVICE(SPCP8x5_PHILIPS_VID , SPCP8x5_PHILIPS_PID)},
42 { USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)},
43 { USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)},
44 { USB_DEVICE(SPCP8x5_008_VID, SPCP8x5_008_PID)},
45 { USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID),
46 .driver_info = SPCP825_QUIRK_NO_UART_STATUS |
47 SPCP825_QUIRK_NO_WORK_MODE },
48 { } /* Terminating entry */
49};
50MODULE_DEVICE_TABLE(usb, id_table);
51
52struct spcp8x5_usb_ctrl_arg {
53 u8 type;
54 u8 cmd;
55 u8 cmd_type;
56 u16 value;
57 u16 index;
58 u16 length;
59};
60
61
62/* spcp8x5 spec register define */
63#define MCR_CONTROL_LINE_RTS 0x02
64#define MCR_CONTROL_LINE_DTR 0x01
65#define MCR_DTR 0x01
66#define MCR_RTS 0x02
67
68#define MSR_STATUS_LINE_DCD 0x80
69#define MSR_STATUS_LINE_RI 0x40
70#define MSR_STATUS_LINE_DSR 0x20
71#define MSR_STATUS_LINE_CTS 0x10
72
73/* verdor command here , we should define myself */
74#define SET_DEFAULT 0x40
75#define SET_DEFAULT_TYPE 0x20
76
77#define SET_UART_FORMAT 0x40
78#define SET_UART_FORMAT_TYPE 0x21
79#define SET_UART_FORMAT_SIZE_5 0x00
80#define SET_UART_FORMAT_SIZE_6 0x01
81#define SET_UART_FORMAT_SIZE_7 0x02
82#define SET_UART_FORMAT_SIZE_8 0x03
83#define SET_UART_FORMAT_STOP_1 0x00
84#define SET_UART_FORMAT_STOP_2 0x04
85#define SET_UART_FORMAT_PAR_NONE 0x00
86#define SET_UART_FORMAT_PAR_ODD 0x10
87#define SET_UART_FORMAT_PAR_EVEN 0x30
88#define SET_UART_FORMAT_PAR_MASK 0xD0
89#define SET_UART_FORMAT_PAR_SPACE 0x90
90
91#define GET_UART_STATUS_TYPE 0xc0
92#define GET_UART_STATUS 0x22
93#define GET_UART_STATUS_MSR 0x06
94
95#define SET_UART_STATUS 0x40
96#define SET_UART_STATUS_TYPE 0x23
97#define SET_UART_STATUS_MCR 0x0004
98#define SET_UART_STATUS_MCR_DTR 0x01
99#define SET_UART_STATUS_MCR_RTS 0x02
100#define SET_UART_STATUS_MCR_LOOP 0x10
101
102#define SET_WORKING_MODE 0x40
103#define SET_WORKING_MODE_TYPE 0x24
104#define SET_WORKING_MODE_U2C 0x00
105#define SET_WORKING_MODE_RS485 0x01
106#define SET_WORKING_MODE_PDMA 0x02
107#define SET_WORKING_MODE_SPP 0x03
108
109#define SET_FLOWCTL_CHAR 0x40
110#define SET_FLOWCTL_CHAR_TYPE 0x25
111
112#define GET_VERSION 0xc0
113#define GET_VERSION_TYPE 0x26
114
115#define SET_REGISTER 0x40
116#define SET_REGISTER_TYPE 0x27
117
118#define GET_REGISTER 0xc0
119#define GET_REGISTER_TYPE 0x28
120
121#define SET_RAM 0x40
122#define SET_RAM_TYPE 0x31
123
124#define GET_RAM 0xc0
125#define GET_RAM_TYPE 0x32
126
127/* how come ??? */
128#define UART_STATE 0x08
129#define UART_STATE_TRANSIENT_MASK 0x75
130#define UART_DCD 0x01
131#define UART_DSR 0x02
132#define UART_BREAK_ERROR 0x04
133#define UART_RING 0x08
134#define UART_FRAME_ERROR 0x10
135#define UART_PARITY_ERROR 0x20
136#define UART_OVERRUN_ERROR 0x40
137#define UART_CTS 0x80
138
139struct spcp8x5_private {
140 unsigned quirks;
141 spinlock_t lock;
142 u8 line_control;
143};
144
145static int spcp8x5_probe(struct usb_serial *serial,
146 const struct usb_device_id *id)
147{
148 usb_set_serial_data(serial, (void *)id);
149
150 return 0;
151}
152
153static int spcp8x5_port_probe(struct usb_serial_port *port)
154{
155 const struct usb_device_id *id = usb_get_serial_data(port->serial);
156 struct spcp8x5_private *priv;
157
158 priv = kzalloc(sizeof(*priv), GFP_KERNEL);
159 if (!priv)
160 return -ENOMEM;
161
162 spin_lock_init(&priv->lock);
163 priv->quirks = id->driver_info;
164
165 usb_set_serial_port_data(port, priv);
166
167 port->port.drain_delay = 256;
168
169 return 0;
170}
171
172static int spcp8x5_port_remove(struct usb_serial_port *port)
173{
174 struct spcp8x5_private *priv;
175
176 priv = usb_get_serial_port_data(port);
177 kfree(priv);
178
179 return 0;
180}
181
182static int spcp8x5_set_ctrl_line(struct usb_serial_port *port, u8 mcr)
183{
184 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
185 struct usb_device *dev = port->serial->dev;
186 int retval;
187
188 if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS)
189 return -EPERM;
190
191 retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
192 SET_UART_STATUS_TYPE, SET_UART_STATUS,
193 mcr, 0x04, NULL, 0, 100);
194 if (retval != 0) {
195 dev_err(&port->dev, "failed to set control lines: %d\n",
196 retval);
197 }
198 return retval;
199}
200
201static int spcp8x5_get_msr(struct usb_serial_port *port, u8 *status)
202{
203 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
204 struct usb_device *dev = port->serial->dev;
205 u8 *buf;
206 int ret;
207
208 if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS)
209 return -EPERM;
210
211 buf = kzalloc(1, GFP_KERNEL);
212 if (!buf)
213 return -ENOMEM;
214
215 ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
216 GET_UART_STATUS, GET_UART_STATUS_TYPE,
217 0, GET_UART_STATUS_MSR, buf, 1, 100);
218 if (ret < 1) {
219 dev_err(&port->dev, "failed to get modem status: %d\n", ret);
220 if (ret >= 0)
221 ret = -EIO;
222 goto out;
223 }
224
225 dev_dbg(&port->dev, "0xc0:0x22:0:6 %d - 0x02%x\n", ret, *buf);
226 *status = *buf;
227 ret = 0;
228out:
229 kfree(buf);
230
231 return ret;
232}
233
234static void spcp8x5_set_work_mode(struct usb_serial_port *port, u16 value,
235 u16 index)
236{
237 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
238 struct usb_device *dev = port->serial->dev;
239 int ret;
240
241 if (priv->quirks & SPCP825_QUIRK_NO_WORK_MODE)
242 return;
243
244 ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
245 SET_WORKING_MODE_TYPE, SET_WORKING_MODE,
246 value, index, NULL, 0, 100);
247 dev_dbg(&port->dev, "value = %#x , index = %#x\n", value, index);
248 if (ret < 0)
249 dev_err(&port->dev, "failed to set work mode: %d\n", ret);
250}
251
252static int spcp8x5_carrier_raised(struct usb_serial_port *port)
253{
254 u8 msr;
255 int ret;
256
257 ret = spcp8x5_get_msr(port, &msr);
258 if (ret || msr & MSR_STATUS_LINE_DCD)
259 return 1;
260
261 return 0;
262}
263
264static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on)
265{
266 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
267 unsigned long flags;
268 u8 control;
269
270 spin_lock_irqsave(&priv->lock, flags);
271 if (on)
272 priv->line_control = MCR_CONTROL_LINE_DTR
273 | MCR_CONTROL_LINE_RTS;
274 else
275 priv->line_control &= ~ (MCR_CONTROL_LINE_DTR
276 | MCR_CONTROL_LINE_RTS);
277 control = priv->line_control;
278 spin_unlock_irqrestore(&priv->lock, flags);
279 spcp8x5_set_ctrl_line(port, control);
280}
281
282static void spcp8x5_init_termios(struct tty_struct *tty)
283{
284 tty->termios = tty_std_termios;
285 tty->termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
286 tty->termios.c_ispeed = 115200;
287 tty->termios.c_ospeed = 115200;
288}
289
290static void spcp8x5_set_termios(struct tty_struct *tty,
291 struct usb_serial_port *port, struct ktermios *old_termios)
292{
293 struct usb_serial *serial = port->serial;
294 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
295 unsigned long flags;
296 unsigned int cflag = tty->termios.c_cflag;
297 unsigned short uartdata;
298 unsigned char buf[2] = {0, 0};
299 int baud;
300 int i;
301 u8 control;
302
303 /* check that they really want us to change something */
304 if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
305 return;
306
307 /* set DTR/RTS active */
308 spin_lock_irqsave(&priv->lock, flags);
309 control = priv->line_control;
310 if (old_termios && (old_termios->c_cflag & CBAUD) == B0) {
311 priv->line_control |= MCR_DTR;
312 if (!(old_termios->c_cflag & CRTSCTS))
313 priv->line_control |= MCR_RTS;
314 }
315 if (control != priv->line_control) {
316 control = priv->line_control;
317 spin_unlock_irqrestore(&priv->lock, flags);
318 spcp8x5_set_ctrl_line(port, control);
319 } else {
320 spin_unlock_irqrestore(&priv->lock, flags);
321 }
322
323 /* Set Baud Rate */
324 baud = tty_get_baud_rate(tty);
325 switch (baud) {
326 case 300: buf[0] = 0x00; break;
327 case 600: buf[0] = 0x01; break;
328 case 1200: buf[0] = 0x02; break;
329 case 2400: buf[0] = 0x03; break;
330 case 4800: buf[0] = 0x04; break;
331 case 9600: buf[0] = 0x05; break;
332 case 19200: buf[0] = 0x07; break;
333 case 38400: buf[0] = 0x09; break;
334 case 57600: buf[0] = 0x0a; break;
335 case 115200: buf[0] = 0x0b; break;
336 case 230400: buf[0] = 0x0c; break;
337 case 460800: buf[0] = 0x0d; break;
338 case 921600: buf[0] = 0x0e; break;
339/* case 1200000: buf[0] = 0x0f; break; */
340/* case 2400000: buf[0] = 0x10; break; */
341 case 3000000: buf[0] = 0x11; break;
342/* case 6000000: buf[0] = 0x12; break; */
343 case 0:
344 case 1000000:
345 buf[0] = 0x0b; break;
346 default:
347 dev_err(&port->dev, "unsupported baudrate, using 9600\n");
348 }
349
350 /* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */
351 switch (cflag & CSIZE) {
352 case CS5:
353 buf[1] |= SET_UART_FORMAT_SIZE_5;
354 break;
355 case CS6:
356 buf[1] |= SET_UART_FORMAT_SIZE_6;
357 break;
358 case CS7:
359 buf[1] |= SET_UART_FORMAT_SIZE_7;
360 break;
361 default:
362 case CS8:
363 buf[1] |= SET_UART_FORMAT_SIZE_8;
364 break;
365 }
366
367 /* Set Stop bit2 : 0:1bit 1:2bit */
368 buf[1] |= (cflag & CSTOPB) ? SET_UART_FORMAT_STOP_2 :
369 SET_UART_FORMAT_STOP_1;
370
371 /* Set Parity bit3-4 01:Odd 11:Even */
372 if (cflag & PARENB) {
373 buf[1] |= (cflag & PARODD) ?
374 SET_UART_FORMAT_PAR_ODD : SET_UART_FORMAT_PAR_EVEN ;
375 } else {
376 buf[1] |= SET_UART_FORMAT_PAR_NONE;
377 }
378 uartdata = buf[0] | buf[1]<<8;
379
380 i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
381 SET_UART_FORMAT_TYPE, SET_UART_FORMAT,
382 uartdata, 0, NULL, 0, 100);
383 if (i < 0)
384 dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n",
385 uartdata, i);
386 dev_dbg(&port->dev, "0x21:0x40:0:0 %d\n", i);
387
388 if (cflag & CRTSCTS) {
389 /* enable hardware flow control */
390 spcp8x5_set_work_mode(port, 0x000a, SET_WORKING_MODE_U2C);
391 }
392}
393
394static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
395{
396 struct usb_serial *serial = port->serial;
397 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
398 int ret;
399
400 usb_clear_halt(serial->dev, port->write_urb->pipe);
401 usb_clear_halt(serial->dev, port->read_urb->pipe);
402
403 ret = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
404 0x09, 0x00,
405 0x01, 0x00, NULL, 0x00, 100);
406 if (ret)
407 return ret;
408
409 spcp8x5_set_ctrl_line(port, priv->line_control);
410
411 if (tty)
412 spcp8x5_set_termios(tty, port, NULL);
413
414 return usb_serial_generic_open(tty, port);
415}
416
417static int spcp8x5_tiocmset(struct tty_struct *tty,
418 unsigned int set, unsigned int clear)
419{
420 struct usb_serial_port *port = tty->driver_data;
421 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
422 unsigned long flags;
423 u8 control;
424
425 spin_lock_irqsave(&priv->lock, flags);
426 if (set & TIOCM_RTS)
427 priv->line_control |= MCR_RTS;
428 if (set & TIOCM_DTR)
429 priv->line_control |= MCR_DTR;
430 if (clear & TIOCM_RTS)
431 priv->line_control &= ~MCR_RTS;
432 if (clear & TIOCM_DTR)
433 priv->line_control &= ~MCR_DTR;
434 control = priv->line_control;
435 spin_unlock_irqrestore(&priv->lock, flags);
436
437 return spcp8x5_set_ctrl_line(port, control);
438}
439
440static int spcp8x5_tiocmget(struct tty_struct *tty)
441{
442 struct usb_serial_port *port = tty->driver_data;
443 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
444 unsigned long flags;
445 unsigned int mcr;
446 u8 status;
447 unsigned int result;
448
449 result = spcp8x5_get_msr(port, &status);
450 if (result)
451 return result;
452
453 spin_lock_irqsave(&priv->lock, flags);
454 mcr = priv->line_control;
455 spin_unlock_irqrestore(&priv->lock, flags);
456
457 result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0)
458 | ((mcr & MCR_RTS) ? TIOCM_RTS : 0)
459 | ((status & MSR_STATUS_LINE_CTS) ? TIOCM_CTS : 0)
460 | ((status & MSR_STATUS_LINE_DSR) ? TIOCM_DSR : 0)
461 | ((status & MSR_STATUS_LINE_RI) ? TIOCM_RI : 0)
462 | ((status & MSR_STATUS_LINE_DCD) ? TIOCM_CD : 0);
463
464 return result;
465}
466
467static struct usb_serial_driver spcp8x5_device = {
468 .driver = {
469 .owner = THIS_MODULE,
470 .name = "SPCP8x5",
471 },
472 .id_table = id_table,
473 .num_ports = 1,
474 .num_bulk_in = 1,
475 .num_bulk_out = 1,
476 .open = spcp8x5_open,
477 .dtr_rts = spcp8x5_dtr_rts,
478 .carrier_raised = spcp8x5_carrier_raised,
479 .set_termios = spcp8x5_set_termios,
480 .init_termios = spcp8x5_init_termios,
481 .tiocmget = spcp8x5_tiocmget,
482 .tiocmset = spcp8x5_tiocmset,
483 .probe = spcp8x5_probe,
484 .port_probe = spcp8x5_port_probe,
485 .port_remove = spcp8x5_port_remove,
486};
487
488static struct usb_serial_driver * const serial_drivers[] = {
489 &spcp8x5_device, NULL
490};
491
492module_usb_serial_driver(serial_drivers, id_table);
493
494MODULE_DESCRIPTION(DRIVER_DESC);
495MODULE_LICENSE("GPL");