Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Intersil ISL1208 rtc class driver
4 *
5 * Copyright 2005,2006 Hebert Valerio Riedel <hvr@gnu.org>
6 */
7
8#include <linux/bcd.h>
9#include <linux/clk.h>
10#include <linux/delay.h>
11#include <linux/i2c.h>
12#include <linux/module.h>
13#include <linux/of.h>
14#include <linux/of_irq.h>
15#include <linux/rtc.h>
16
17/* Register map */
18/* rtc section */
19#define ISL1208_REG_SC 0x00
20#define ISL1208_REG_MN 0x01
21#define ISL1208_REG_HR 0x02
22#define ISL1208_REG_HR_MIL (1<<7) /* 24h/12h mode */
23#define ISL1208_REG_HR_PM (1<<5) /* PM/AM bit in 12h mode */
24#define ISL1208_REG_DT 0x03
25#define ISL1208_REG_MO 0x04
26#define ISL1208_REG_YR 0x05
27#define ISL1208_REG_DW 0x06
28#define ISL1208_RTC_SECTION_LEN 7
29
30/* control/status section */
31#define ISL1208_REG_SR 0x07
32#define ISL1208_REG_SR_ARST (1<<7) /* auto reset */
33#define ISL1208_REG_SR_XTOSCB (1<<6) /* crystal oscillator */
34#define ISL1208_REG_SR_WRTC (1<<4) /* write rtc */
35#define ISL1208_REG_SR_EVT (1<<3) /* event */
36#define ISL1208_REG_SR_ALM (1<<2) /* alarm */
37#define ISL1208_REG_SR_BAT (1<<1) /* battery */
38#define ISL1208_REG_SR_RTCF (1<<0) /* rtc fail */
39#define ISL1208_REG_INT 0x08
40#define ISL1208_REG_INT_ALME (1<<6) /* alarm enable */
41#define ISL1208_REG_INT_IM (1<<7) /* interrupt/alarm mode */
42#define ISL1219_REG_EV 0x09
43#define ISL1219_REG_EV_EVEN (1<<4) /* event detection enable */
44#define ISL1219_REG_EV_EVIENB (1<<7) /* event in pull-up disable */
45#define ISL1208_REG_ATR 0x0a
46#define ISL1208_REG_DTR 0x0b
47
48/* alarm section */
49#define ISL1208_REG_SCA 0x0c
50#define ISL1208_REG_MNA 0x0d
51#define ISL1208_REG_HRA 0x0e
52#define ISL1208_REG_DTA 0x0f
53#define ISL1208_REG_MOA 0x10
54#define ISL1208_REG_DWA 0x11
55#define ISL1208_ALARM_SECTION_LEN 6
56
57/* user section */
58#define ISL1208_REG_USR1 0x12
59#define ISL1208_REG_USR2 0x13
60#define ISL1208_USR_SECTION_LEN 2
61
62/* event section */
63#define ISL1219_REG_SCT 0x14
64#define ISL1219_REG_MNT 0x15
65#define ISL1219_REG_HRT 0x16
66#define ISL1219_REG_DTT 0x17
67#define ISL1219_REG_MOT 0x18
68#define ISL1219_REG_YRT 0x19
69#define ISL1219_EVT_SECTION_LEN 6
70
71static struct i2c_driver isl1208_driver;
72
73/* Chip capabilities table */
74struct isl1208_config {
75 unsigned int nvmem_length;
76 unsigned has_tamper:1;
77 unsigned has_timestamp:1;
78 unsigned has_inverted_osc_bit:1;
79};
80
81static const struct isl1208_config config_isl1208 = {
82 .nvmem_length = 2,
83 .has_tamper = false,
84 .has_timestamp = false
85};
86
87static const struct isl1208_config config_isl1209 = {
88 .nvmem_length = 2,
89 .has_tamper = true,
90 .has_timestamp = false
91};
92
93static const struct isl1208_config config_isl1218 = {
94 .nvmem_length = 8,
95 .has_tamper = false,
96 .has_timestamp = false
97};
98
99static const struct isl1208_config config_isl1219 = {
100 .nvmem_length = 2,
101 .has_tamper = true,
102 .has_timestamp = true
103};
104
105static const struct isl1208_config config_raa215300_a0 = {
106 .nvmem_length = 2,
107 .has_tamper = false,
108 .has_timestamp = false,
109 .has_inverted_osc_bit = true
110};
111
112static const struct i2c_device_id isl1208_id[] = {
113 { "isl1208", .driver_data = (kernel_ulong_t)&config_isl1208 },
114 { "isl1209", .driver_data = (kernel_ulong_t)&config_isl1209 },
115 { "isl1218", .driver_data = (kernel_ulong_t)&config_isl1218 },
116 { "isl1219", .driver_data = (kernel_ulong_t)&config_isl1219 },
117 { "raa215300_a0", .driver_data = (kernel_ulong_t)&config_raa215300_a0 },
118 { }
119};
120MODULE_DEVICE_TABLE(i2c, isl1208_id);
121
122static const __maybe_unused struct of_device_id isl1208_of_match[] = {
123 { .compatible = "isil,isl1208", .data = &config_isl1208 },
124 { .compatible = "isil,isl1209", .data = &config_isl1209 },
125 { .compatible = "isil,isl1218", .data = &config_isl1218 },
126 { .compatible = "isil,isl1219", .data = &config_isl1219 },
127 { }
128};
129MODULE_DEVICE_TABLE(of, isl1208_of_match);
130
131/* Device state */
132struct isl1208_state {
133 struct nvmem_config nvmem_config;
134 struct rtc_device *rtc;
135 const struct isl1208_config *config;
136};
137
138/* block read */
139static int
140isl1208_i2c_read_regs(struct i2c_client *client, u8 reg, u8 buf[],
141 unsigned len)
142{
143 int ret;
144
145 WARN_ON(reg > ISL1219_REG_YRT);
146 WARN_ON(reg + len > ISL1219_REG_YRT + 1);
147
148 ret = i2c_smbus_read_i2c_block_data(client, reg, len, buf);
149 return (ret < 0) ? ret : 0;
150}
151
152/* block write */
153static int
154isl1208_i2c_set_regs(struct i2c_client *client, u8 reg, u8 const buf[],
155 unsigned len)
156{
157 int ret;
158
159 WARN_ON(reg > ISL1219_REG_YRT);
160 WARN_ON(reg + len > ISL1219_REG_YRT + 1);
161
162 ret = i2c_smbus_write_i2c_block_data(client, reg, len, buf);
163 return (ret < 0) ? ret : 0;
164}
165
166/* simple check to see whether we have a isl1208 */
167static int
168isl1208_i2c_validate_client(struct i2c_client *client)
169{
170 u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
171 u8 zero_mask[ISL1208_RTC_SECTION_LEN] = {
172 0x80, 0x80, 0x40, 0xc0, 0xe0, 0x00, 0xf8
173 };
174 int i;
175 int ret;
176
177 ret = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
178 if (ret < 0)
179 return ret;
180
181 for (i = 0; i < ISL1208_RTC_SECTION_LEN; ++i) {
182 if (regs[i] & zero_mask[i]) /* check if bits are cleared */
183 return -ENODEV;
184 }
185
186 return 0;
187}
188
189static int isl1208_set_xtoscb(struct i2c_client *client, int sr, int xtosb_val)
190{
191 /* Do nothing if bit is already set to desired value */
192 if (!!(sr & ISL1208_REG_SR_XTOSCB) == xtosb_val)
193 return 0;
194
195 if (xtosb_val)
196 sr |= ISL1208_REG_SR_XTOSCB;
197 else
198 sr &= ~ISL1208_REG_SR_XTOSCB;
199
200 return i2c_smbus_write_byte_data(client, ISL1208_REG_SR, sr);
201}
202
203static int
204isl1208_i2c_get_sr(struct i2c_client *client)
205{
206 return i2c_smbus_read_byte_data(client, ISL1208_REG_SR);
207}
208
209static int
210isl1208_i2c_get_atr(struct i2c_client *client)
211{
212 int atr = i2c_smbus_read_byte_data(client, ISL1208_REG_ATR);
213 if (atr < 0)
214 return atr;
215
216 /* The 6bit value in the ATR register controls the load
217 * capacitance C_load * in steps of 0.25pF
218 *
219 * bit (1<<5) of the ATR register is inverted
220 *
221 * C_load(ATR=0x20) = 4.50pF
222 * C_load(ATR=0x00) = 12.50pF
223 * C_load(ATR=0x1f) = 20.25pF
224 *
225 */
226
227 atr &= 0x3f; /* mask out lsb */
228 atr ^= 1 << 5; /* invert 6th bit */
229 atr += 2 * 9; /* add offset of 4.5pF; unit[atr] = 0.25pF */
230
231 return atr;
232}
233
234/* returns adjustment value + 100 */
235static int
236isl1208_i2c_get_dtr(struct i2c_client *client)
237{
238 int dtr = i2c_smbus_read_byte_data(client, ISL1208_REG_DTR);
239 if (dtr < 0)
240 return -EIO;
241
242 /* dtr encodes adjustments of {-60,-40,-20,0,20,40,60} ppm */
243 dtr = ((dtr & 0x3) * 20) * (dtr & (1 << 2) ? -1 : 1);
244
245 return dtr + 100;
246}
247
248static int
249isl1208_i2c_get_usr(struct i2c_client *client)
250{
251 u8 buf[ISL1208_USR_SECTION_LEN] = { 0, };
252 int ret;
253
254 ret = isl1208_i2c_read_regs(client, ISL1208_REG_USR1, buf,
255 ISL1208_USR_SECTION_LEN);
256 if (ret < 0)
257 return ret;
258
259 return (buf[1] << 8) | buf[0];
260}
261
262static int
263isl1208_i2c_set_usr(struct i2c_client *client, u16 usr)
264{
265 u8 buf[ISL1208_USR_SECTION_LEN];
266
267 buf[0] = usr & 0xff;
268 buf[1] = (usr >> 8) & 0xff;
269
270 return isl1208_i2c_set_regs(client, ISL1208_REG_USR1, buf,
271 ISL1208_USR_SECTION_LEN);
272}
273
274static int
275isl1208_rtc_toggle_alarm(struct i2c_client *client, int enable)
276{
277 int icr = i2c_smbus_read_byte_data(client, ISL1208_REG_INT);
278
279 if (icr < 0) {
280 dev_err(&client->dev, "%s: reading INT failed\n", __func__);
281 return icr;
282 }
283
284 if (enable)
285 icr |= ISL1208_REG_INT_ALME | ISL1208_REG_INT_IM;
286 else
287 icr &= ~(ISL1208_REG_INT_ALME | ISL1208_REG_INT_IM);
288
289 icr = i2c_smbus_write_byte_data(client, ISL1208_REG_INT, icr);
290 if (icr < 0) {
291 dev_err(&client->dev, "%s: writing INT failed\n", __func__);
292 return icr;
293 }
294
295 return 0;
296}
297
298static int
299isl1208_rtc_proc(struct device *dev, struct seq_file *seq)
300{
301 struct i2c_client *const client = to_i2c_client(dev);
302 int sr, dtr, atr, usr;
303
304 sr = isl1208_i2c_get_sr(client);
305 if (sr < 0) {
306 dev_err(&client->dev, "%s: reading SR failed\n", __func__);
307 return sr;
308 }
309
310 seq_printf(seq, "status_reg\t:%s%s%s%s%s%s (0x%.2x)\n",
311 (sr & ISL1208_REG_SR_RTCF) ? " RTCF" : "",
312 (sr & ISL1208_REG_SR_BAT) ? " BAT" : "",
313 (sr & ISL1208_REG_SR_ALM) ? " ALM" : "",
314 (sr & ISL1208_REG_SR_WRTC) ? " WRTC" : "",
315 (sr & ISL1208_REG_SR_XTOSCB) ? " XTOSCB" : "",
316 (sr & ISL1208_REG_SR_ARST) ? " ARST" : "", sr);
317
318 seq_printf(seq, "batt_status\t: %s\n",
319 (sr & ISL1208_REG_SR_RTCF) ? "bad" : "okay");
320
321 dtr = isl1208_i2c_get_dtr(client);
322 if (dtr >= 0)
323 seq_printf(seq, "digital_trim\t: %d ppm\n", dtr - 100);
324
325 atr = isl1208_i2c_get_atr(client);
326 if (atr >= 0)
327 seq_printf(seq, "analog_trim\t: %d.%.2d pF\n",
328 atr >> 2, (atr & 0x3) * 25);
329
330 usr = isl1208_i2c_get_usr(client);
331 if (usr >= 0)
332 seq_printf(seq, "user_data\t: 0x%.4x\n", usr);
333
334 return 0;
335}
336
337static int
338isl1208_i2c_read_time(struct i2c_client *client, struct rtc_time *tm)
339{
340 int sr;
341 u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
342
343 sr = isl1208_i2c_get_sr(client);
344 if (sr < 0) {
345 dev_err(&client->dev, "%s: reading SR failed\n", __func__);
346 return -EIO;
347 }
348
349 sr = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
350 if (sr < 0) {
351 dev_err(&client->dev, "%s: reading RTC section failed\n",
352 __func__);
353 return sr;
354 }
355
356 tm->tm_sec = bcd2bin(regs[ISL1208_REG_SC]);
357 tm->tm_min = bcd2bin(regs[ISL1208_REG_MN]);
358
359 /* HR field has a more complex interpretation */
360 {
361 const u8 _hr = regs[ISL1208_REG_HR];
362 if (_hr & ISL1208_REG_HR_MIL) /* 24h format */
363 tm->tm_hour = bcd2bin(_hr & 0x3f);
364 else {
365 /* 12h format */
366 tm->tm_hour = bcd2bin(_hr & 0x1f);
367 if (_hr & ISL1208_REG_HR_PM) /* PM flag set */
368 tm->tm_hour += 12;
369 }
370 }
371
372 tm->tm_mday = bcd2bin(regs[ISL1208_REG_DT]);
373 tm->tm_mon = bcd2bin(regs[ISL1208_REG_MO]) - 1; /* rtc starts at 1 */
374 tm->tm_year = bcd2bin(regs[ISL1208_REG_YR]) + 100;
375 tm->tm_wday = bcd2bin(regs[ISL1208_REG_DW]);
376
377 return 0;
378}
379
380static int
381isl1208_i2c_read_alarm(struct i2c_client *client, struct rtc_wkalrm *alarm)
382{
383 struct rtc_time *const tm = &alarm->time;
384 u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, };
385 int icr, yr, sr = isl1208_i2c_get_sr(client);
386
387 if (sr < 0) {
388 dev_err(&client->dev, "%s: reading SR failed\n", __func__);
389 return sr;
390 }
391
392 sr = isl1208_i2c_read_regs(client, ISL1208_REG_SCA, regs,
393 ISL1208_ALARM_SECTION_LEN);
394 if (sr < 0) {
395 dev_err(&client->dev, "%s: reading alarm section failed\n",
396 __func__);
397 return sr;
398 }
399
400 /* MSB of each alarm register is an enable bit */
401 tm->tm_sec = bcd2bin(regs[ISL1208_REG_SCA - ISL1208_REG_SCA] & 0x7f);
402 tm->tm_min = bcd2bin(regs[ISL1208_REG_MNA - ISL1208_REG_SCA] & 0x7f);
403 tm->tm_hour = bcd2bin(regs[ISL1208_REG_HRA - ISL1208_REG_SCA] & 0x3f);
404 tm->tm_mday = bcd2bin(regs[ISL1208_REG_DTA - ISL1208_REG_SCA] & 0x3f);
405 tm->tm_mon =
406 bcd2bin(regs[ISL1208_REG_MOA - ISL1208_REG_SCA] & 0x1f) - 1;
407 tm->tm_wday = bcd2bin(regs[ISL1208_REG_DWA - ISL1208_REG_SCA] & 0x03);
408
409 /* The alarm doesn't store the year so get it from the rtc section */
410 yr = i2c_smbus_read_byte_data(client, ISL1208_REG_YR);
411 if (yr < 0) {
412 dev_err(&client->dev, "%s: reading RTC YR failed\n", __func__);
413 return yr;
414 }
415 tm->tm_year = bcd2bin(yr) + 100;
416
417 icr = i2c_smbus_read_byte_data(client, ISL1208_REG_INT);
418 if (icr < 0) {
419 dev_err(&client->dev, "%s: reading INT failed\n", __func__);
420 return icr;
421 }
422 alarm->enabled = !!(icr & ISL1208_REG_INT_ALME);
423
424 return 0;
425}
426
427static int
428isl1208_i2c_set_alarm(struct i2c_client *client, struct rtc_wkalrm *alarm)
429{
430 struct rtc_time *alarm_tm = &alarm->time;
431 u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, };
432 const int offs = ISL1208_REG_SCA;
433 struct rtc_time rtc_tm;
434 int err, enable;
435
436 err = isl1208_i2c_read_time(client, &rtc_tm);
437 if (err)
438 return err;
439
440 /* If the alarm time is before the current time disable the alarm */
441 if (!alarm->enabled || rtc_tm_sub(alarm_tm, &rtc_tm) <= 0)
442 enable = 0x00;
443 else
444 enable = 0x80;
445
446 /* Program the alarm and enable it for each setting */
447 regs[ISL1208_REG_SCA - offs] = bin2bcd(alarm_tm->tm_sec) | enable;
448 regs[ISL1208_REG_MNA - offs] = bin2bcd(alarm_tm->tm_min) | enable;
449 regs[ISL1208_REG_HRA - offs] = bin2bcd(alarm_tm->tm_hour) |
450 ISL1208_REG_HR_MIL | enable;
451
452 regs[ISL1208_REG_DTA - offs] = bin2bcd(alarm_tm->tm_mday) | enable;
453 regs[ISL1208_REG_MOA - offs] = bin2bcd(alarm_tm->tm_mon + 1) | enable;
454 regs[ISL1208_REG_DWA - offs] = bin2bcd(alarm_tm->tm_wday & 7) | enable;
455
456 /* write ALARM registers */
457 err = isl1208_i2c_set_regs(client, offs, regs,
458 ISL1208_ALARM_SECTION_LEN);
459 if (err < 0) {
460 dev_err(&client->dev, "%s: writing ALARM section failed\n",
461 __func__);
462 return err;
463 }
464
465 err = isl1208_rtc_toggle_alarm(client, enable);
466 if (err)
467 return err;
468
469 return 0;
470}
471
472static int
473isl1208_rtc_read_time(struct device *dev, struct rtc_time *tm)
474{
475 return isl1208_i2c_read_time(to_i2c_client(dev), tm);
476}
477
478static int
479isl1208_i2c_set_time(struct i2c_client *client, struct rtc_time const *tm)
480{
481 int sr;
482 u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
483
484 /* The clock has an 8 bit wide bcd-coded register (they never learn)
485 * for the year. tm_year is an offset from 1900 and we are interested
486 * in the 2000-2099 range, so any value less than 100 is invalid.
487 */
488 if (tm->tm_year < 100)
489 return -EINVAL;
490
491 regs[ISL1208_REG_SC] = bin2bcd(tm->tm_sec);
492 regs[ISL1208_REG_MN] = bin2bcd(tm->tm_min);
493 regs[ISL1208_REG_HR] = bin2bcd(tm->tm_hour) | ISL1208_REG_HR_MIL;
494
495 regs[ISL1208_REG_DT] = bin2bcd(tm->tm_mday);
496 regs[ISL1208_REG_MO] = bin2bcd(tm->tm_mon + 1);
497 regs[ISL1208_REG_YR] = bin2bcd(tm->tm_year - 100);
498
499 regs[ISL1208_REG_DW] = bin2bcd(tm->tm_wday & 7);
500
501 sr = isl1208_i2c_get_sr(client);
502 if (sr < 0) {
503 dev_err(&client->dev, "%s: reading SR failed\n", __func__);
504 return sr;
505 }
506
507 /* set WRTC */
508 sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR,
509 sr | ISL1208_REG_SR_WRTC);
510 if (sr < 0) {
511 dev_err(&client->dev, "%s: writing SR failed\n", __func__);
512 return sr;
513 }
514
515 /* write RTC registers */
516 sr = isl1208_i2c_set_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
517 if (sr < 0) {
518 dev_err(&client->dev, "%s: writing RTC section failed\n",
519 __func__);
520 return sr;
521 }
522
523 /* clear WRTC again */
524 sr = isl1208_i2c_get_sr(client);
525 if (sr < 0) {
526 dev_err(&client->dev, "%s: reading SR failed\n", __func__);
527 return sr;
528 }
529 sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR,
530 sr & ~ISL1208_REG_SR_WRTC);
531 if (sr < 0) {
532 dev_err(&client->dev, "%s: writing SR failed\n", __func__);
533 return sr;
534 }
535
536 return 0;
537}
538
539static int
540isl1208_rtc_set_time(struct device *dev, struct rtc_time *tm)
541{
542 return isl1208_i2c_set_time(to_i2c_client(dev), tm);
543}
544
545static int
546isl1208_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
547{
548 return isl1208_i2c_read_alarm(to_i2c_client(dev), alarm);
549}
550
551static int
552isl1208_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
553{
554 return isl1208_i2c_set_alarm(to_i2c_client(dev), alarm);
555}
556
557static ssize_t timestamp0_store(struct device *dev,
558 struct device_attribute *attr,
559 const char *buf, size_t count)
560{
561 struct i2c_client *client = to_i2c_client(dev->parent);
562 int sr;
563
564 sr = isl1208_i2c_get_sr(client);
565 if (sr < 0) {
566 dev_err(dev, "%s: reading SR failed\n", __func__);
567 return sr;
568 }
569
570 sr &= ~ISL1208_REG_SR_EVT;
571
572 sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR, sr);
573 if (sr < 0)
574 dev_err(dev, "%s: writing SR failed\n",
575 __func__);
576
577 return count;
578};
579
580static ssize_t timestamp0_show(struct device *dev,
581 struct device_attribute *attr, char *buf)
582{
583 struct i2c_client *client = to_i2c_client(dev->parent);
584 u8 regs[ISL1219_EVT_SECTION_LEN] = { 0, };
585 struct rtc_time tm;
586 int sr;
587
588 sr = isl1208_i2c_get_sr(client);
589 if (sr < 0) {
590 dev_err(dev, "%s: reading SR failed\n", __func__);
591 return sr;
592 }
593
594 if (!(sr & ISL1208_REG_SR_EVT))
595 return 0;
596
597 sr = isl1208_i2c_read_regs(client, ISL1219_REG_SCT, regs,
598 ISL1219_EVT_SECTION_LEN);
599 if (sr < 0) {
600 dev_err(dev, "%s: reading event section failed\n",
601 __func__);
602 return 0;
603 }
604
605 /* MSB of each alarm register is an enable bit */
606 tm.tm_sec = bcd2bin(regs[ISL1219_REG_SCT - ISL1219_REG_SCT] & 0x7f);
607 tm.tm_min = bcd2bin(regs[ISL1219_REG_MNT - ISL1219_REG_SCT] & 0x7f);
608 tm.tm_hour = bcd2bin(regs[ISL1219_REG_HRT - ISL1219_REG_SCT] & 0x3f);
609 tm.tm_mday = bcd2bin(regs[ISL1219_REG_DTT - ISL1219_REG_SCT] & 0x3f);
610 tm.tm_mon =
611 bcd2bin(regs[ISL1219_REG_MOT - ISL1219_REG_SCT] & 0x1f) - 1;
612 tm.tm_year = bcd2bin(regs[ISL1219_REG_YRT - ISL1219_REG_SCT]) + 100;
613
614 sr = rtc_valid_tm(&tm);
615 if (sr)
616 return sr;
617
618 return sprintf(buf, "%llu\n",
619 (unsigned long long)rtc_tm_to_time64(&tm));
620};
621
622static DEVICE_ATTR_RW(timestamp0);
623
624static irqreturn_t
625isl1208_rtc_interrupt(int irq, void *data)
626{
627 unsigned long timeout = jiffies + msecs_to_jiffies(1000);
628 struct i2c_client *client = data;
629 struct isl1208_state *isl1208 = i2c_get_clientdata(client);
630 int handled = 0, sr, err;
631
632 if (!isl1208->config->has_tamper) {
633 /*
634 * The INT# output is pulled low 250ms after the alarm is
635 * triggered. After the INT# output is pulled low, it is low for
636 * at least 250ms, even if the correct action is taken to clear
637 * it. It is impossible to clear ALM if it is still active. The
638 * host must wait for the RTC to progress past the alarm time
639 * plus the 250ms delay before clearing ALM.
640 */
641 msleep(250);
642 }
643
644 /*
645 * I2C reads get NAK'ed if we read straight away after an interrupt?
646 * Using a mdelay/msleep didn't seem to help either, so we work around
647 * this by continually trying to read the register for a short time.
648 */
649 while (1) {
650 sr = isl1208_i2c_get_sr(client);
651 if (sr >= 0)
652 break;
653
654 if (time_after(jiffies, timeout)) {
655 dev_err(&client->dev, "%s: reading SR failed\n",
656 __func__);
657 return sr;
658 }
659 }
660
661 if (sr & ISL1208_REG_SR_ALM) {
662 dev_dbg(&client->dev, "alarm!\n");
663
664 rtc_update_irq(isl1208->rtc, 1, RTC_IRQF | RTC_AF);
665
666 /* Disable the alarm */
667 err = isl1208_rtc_toggle_alarm(client, 0);
668 if (err)
669 return err;
670
671 fsleep(275);
672
673 /* Clear the alarm */
674 sr &= ~ISL1208_REG_SR_ALM;
675 sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR, sr);
676 if (sr < 0)
677 dev_err(&client->dev, "%s: writing SR failed\n",
678 __func__);
679 else
680 handled = 1;
681 }
682
683 if (isl1208->config->has_tamper && (sr & ISL1208_REG_SR_EVT)) {
684 dev_warn(&client->dev, "event detected");
685 handled = 1;
686 if (isl1208->config->has_timestamp)
687 sysfs_notify(&isl1208->rtc->dev.kobj, NULL,
688 dev_attr_timestamp0.attr.name);
689 }
690
691 return handled ? IRQ_HANDLED : IRQ_NONE;
692}
693
694static const struct rtc_class_ops isl1208_rtc_ops = {
695 .proc = isl1208_rtc_proc,
696 .read_time = isl1208_rtc_read_time,
697 .set_time = isl1208_rtc_set_time,
698 .read_alarm = isl1208_rtc_read_alarm,
699 .set_alarm = isl1208_rtc_set_alarm,
700};
701
702/* sysfs interface */
703
704static ssize_t
705isl1208_sysfs_show_atrim(struct device *dev,
706 struct device_attribute *attr, char *buf)
707{
708 int atr = isl1208_i2c_get_atr(to_i2c_client(dev->parent));
709 if (atr < 0)
710 return atr;
711
712 return sprintf(buf, "%d.%.2d pF\n", atr >> 2, (atr & 0x3) * 25);
713}
714
715static DEVICE_ATTR(atrim, S_IRUGO, isl1208_sysfs_show_atrim, NULL);
716
717static ssize_t
718isl1208_sysfs_show_dtrim(struct device *dev,
719 struct device_attribute *attr, char *buf)
720{
721 int dtr = isl1208_i2c_get_dtr(to_i2c_client(dev->parent));
722 if (dtr < 0)
723 return dtr;
724
725 return sprintf(buf, "%d ppm\n", dtr - 100);
726}
727
728static DEVICE_ATTR(dtrim, S_IRUGO, isl1208_sysfs_show_dtrim, NULL);
729
730static ssize_t
731isl1208_sysfs_show_usr(struct device *dev,
732 struct device_attribute *attr, char *buf)
733{
734 int usr = isl1208_i2c_get_usr(to_i2c_client(dev->parent));
735 if (usr < 0)
736 return usr;
737
738 return sprintf(buf, "0x%.4x\n", usr);
739}
740
741static ssize_t
742isl1208_sysfs_store_usr(struct device *dev,
743 struct device_attribute *attr,
744 const char *buf, size_t count)
745{
746 int usr = -1;
747
748 if (buf[0] == '0' && (buf[1] == 'x' || buf[1] == 'X')) {
749 if (sscanf(buf, "%x", &usr) != 1)
750 return -EINVAL;
751 } else {
752 if (sscanf(buf, "%d", &usr) != 1)
753 return -EINVAL;
754 }
755
756 if (usr < 0 || usr > 0xffff)
757 return -EINVAL;
758
759 if (isl1208_i2c_set_usr(to_i2c_client(dev->parent), usr))
760 return -EIO;
761
762 return count;
763}
764
765static DEVICE_ATTR(usr, S_IRUGO | S_IWUSR, isl1208_sysfs_show_usr,
766 isl1208_sysfs_store_usr);
767
768static struct attribute *isl1208_rtc_attrs[] = {
769 &dev_attr_atrim.attr,
770 &dev_attr_dtrim.attr,
771 &dev_attr_usr.attr,
772 NULL
773};
774
775static const struct attribute_group isl1208_rtc_sysfs_files = {
776 .attrs = isl1208_rtc_attrs,
777};
778
779static struct attribute *isl1219_rtc_attrs[] = {
780 &dev_attr_timestamp0.attr,
781 NULL
782};
783
784static const struct attribute_group isl1219_rtc_sysfs_files = {
785 .attrs = isl1219_rtc_attrs,
786};
787
788static int isl1208_nvmem_read(void *priv, unsigned int off, void *buf,
789 size_t count)
790{
791 struct isl1208_state *isl1208 = priv;
792 struct i2c_client *client = to_i2c_client(isl1208->rtc->dev.parent);
793
794 /* nvmem sanitizes offset/count for us, but count==0 is possible */
795 if (!count)
796 return count;
797
798 return isl1208_i2c_read_regs(client, ISL1208_REG_USR1 + off, buf,
799 count);
800}
801
802static int isl1208_nvmem_write(void *priv, unsigned int off, void *buf,
803 size_t count)
804{
805 struct isl1208_state *isl1208 = priv;
806 struct i2c_client *client = to_i2c_client(isl1208->rtc->dev.parent);
807
808 /* nvmem sanitizes off/count for us, but count==0 is possible */
809 if (!count)
810 return count;
811
812 return isl1208_i2c_set_regs(client, ISL1208_REG_USR1 + off, buf,
813 count);
814}
815
816static const struct nvmem_config isl1208_nvmem_config = {
817 .name = "isl1208_nvram",
818 .word_size = 1,
819 .stride = 1,
820 /* .size from chip specific config */
821 .reg_read = isl1208_nvmem_read,
822 .reg_write = isl1208_nvmem_write,
823};
824
825static int isl1208_setup_irq(struct i2c_client *client, int irq)
826{
827 int rc = devm_request_threaded_irq(&client->dev, irq, NULL,
828 isl1208_rtc_interrupt,
829 IRQF_SHARED | IRQF_ONESHOT,
830 isl1208_driver.driver.name,
831 client);
832 if (!rc) {
833 device_init_wakeup(&client->dev, 1);
834 enable_irq_wake(irq);
835 } else {
836 dev_err(&client->dev,
837 "Unable to request irq %d, no alarm support\n",
838 irq);
839 }
840 return rc;
841}
842
843static int
844isl1208_clk_present(struct i2c_client *client, const char *name)
845{
846 struct clk *clk;
847
848 clk = devm_clk_get_optional(&client->dev, name);
849 if (IS_ERR(clk))
850 return PTR_ERR(clk);
851
852 return !!clk;
853}
854
855static int
856isl1208_probe(struct i2c_client *client)
857{
858 struct isl1208_state *isl1208;
859 int evdet_irq = -1;
860 int xtosb_val = 0;
861 int rc = 0;
862 int sr;
863
864 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
865 return -ENODEV;
866
867 if (isl1208_i2c_validate_client(client) < 0)
868 return -ENODEV;
869
870 /* Allocate driver state, point i2c client data to it */
871 isl1208 = devm_kzalloc(&client->dev, sizeof(*isl1208), GFP_KERNEL);
872 if (!isl1208)
873 return -ENOMEM;
874 i2c_set_clientdata(client, isl1208);
875
876 /* Determine which chip we have */
877 isl1208->config = i2c_get_match_data(client);
878 if (!isl1208->config)
879 return -ENODEV;
880
881 rc = isl1208_clk_present(client, "xin");
882 if (rc < 0)
883 return rc;
884
885 if (!rc) {
886 rc = isl1208_clk_present(client, "clkin");
887 if (rc < 0)
888 return rc;
889
890 if (rc)
891 xtosb_val = 1;
892 }
893
894 isl1208->rtc = devm_rtc_allocate_device(&client->dev);
895 if (IS_ERR(isl1208->rtc))
896 return PTR_ERR(isl1208->rtc);
897
898 isl1208->rtc->ops = &isl1208_rtc_ops;
899
900 /* Setup nvmem configuration in driver state struct */
901 isl1208->nvmem_config = isl1208_nvmem_config;
902 isl1208->nvmem_config.size = isl1208->config->nvmem_length;
903 isl1208->nvmem_config.priv = isl1208;
904
905 sr = isl1208_i2c_get_sr(client);
906 if (sr < 0) {
907 dev_err(&client->dev, "reading status failed\n");
908 return sr;
909 }
910
911 if (isl1208->config->has_inverted_osc_bit)
912 xtosb_val = !xtosb_val;
913
914 rc = isl1208_set_xtoscb(client, sr, xtosb_val);
915 if (rc)
916 return rc;
917
918 if (sr & ISL1208_REG_SR_RTCF)
919 dev_warn(&client->dev, "rtc power failure detected, "
920 "please set clock.\n");
921
922 if (isl1208->config->has_tamper) {
923 struct device_node *np = client->dev.of_node;
924 u32 evienb;
925
926 rc = i2c_smbus_read_byte_data(client, ISL1219_REG_EV);
927 if (rc < 0) {
928 dev_err(&client->dev, "failed to read EV reg\n");
929 return rc;
930 }
931 rc |= ISL1219_REG_EV_EVEN;
932 if (!of_property_read_u32(np, "isil,ev-evienb", &evienb)) {
933 if (evienb)
934 rc |= ISL1219_REG_EV_EVIENB;
935 else
936 rc &= ~ISL1219_REG_EV_EVIENB;
937 }
938 rc = i2c_smbus_write_byte_data(client, ISL1219_REG_EV, rc);
939 if (rc < 0) {
940 dev_err(&client->dev, "could not enable tamper detection\n");
941 return rc;
942 }
943 evdet_irq = of_irq_get_byname(np, "evdet");
944 }
945 if (isl1208->config->has_timestamp) {
946 rc = rtc_add_group(isl1208->rtc, &isl1219_rtc_sysfs_files);
947 if (rc)
948 return rc;
949 }
950
951 rc = rtc_add_group(isl1208->rtc, &isl1208_rtc_sysfs_files);
952 if (rc)
953 return rc;
954
955 if (client->irq > 0) {
956 rc = isl1208_setup_irq(client, client->irq);
957 if (rc)
958 return rc;
959 } else {
960 clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, isl1208->rtc->features);
961 }
962
963 if (evdet_irq > 0 && evdet_irq != client->irq)
964 rc = isl1208_setup_irq(client, evdet_irq);
965 if (rc)
966 return rc;
967
968 rc = devm_rtc_nvmem_register(isl1208->rtc, &isl1208->nvmem_config);
969 if (rc)
970 return rc;
971
972 return devm_rtc_register_device(isl1208->rtc);
973}
974
975static struct i2c_driver isl1208_driver = {
976 .driver = {
977 .name = "rtc-isl1208",
978 .of_match_table = of_match_ptr(isl1208_of_match),
979 },
980 .probe = isl1208_probe,
981 .id_table = isl1208_id,
982};
983
984module_i2c_driver(isl1208_driver);
985
986MODULE_AUTHOR("Herbert Valerio Riedel <hvr@gnu.org>");
987MODULE_DESCRIPTION("Intersil ISL1208 RTC driver");
988MODULE_LICENSE("GPL");
1/*
2 * Intersil ISL1208 rtc class driver
3 *
4 * Copyright 2005,2006 Hebert Valerio Riedel <hvr@gnu.org>
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
10 *
11 */
12
13#include <linux/module.h>
14#include <linux/i2c.h>
15#include <linux/bcd.h>
16#include <linux/rtc.h>
17
18/* Register map */
19/* rtc section */
20#define ISL1208_REG_SC 0x00
21#define ISL1208_REG_MN 0x01
22#define ISL1208_REG_HR 0x02
23#define ISL1208_REG_HR_MIL (1<<7) /* 24h/12h mode */
24#define ISL1208_REG_HR_PM (1<<5) /* PM/AM bit in 12h mode */
25#define ISL1208_REG_DT 0x03
26#define ISL1208_REG_MO 0x04
27#define ISL1208_REG_YR 0x05
28#define ISL1208_REG_DW 0x06
29#define ISL1208_RTC_SECTION_LEN 7
30
31/* control/status section */
32#define ISL1208_REG_SR 0x07
33#define ISL1208_REG_SR_ARST (1<<7) /* auto reset */
34#define ISL1208_REG_SR_XTOSCB (1<<6) /* crystal oscillator */
35#define ISL1208_REG_SR_WRTC (1<<4) /* write rtc */
36#define ISL1208_REG_SR_ALM (1<<2) /* alarm */
37#define ISL1208_REG_SR_BAT (1<<1) /* battery */
38#define ISL1208_REG_SR_RTCF (1<<0) /* rtc fail */
39#define ISL1208_REG_INT 0x08
40#define ISL1208_REG_INT_ALME (1<<6) /* alarm enable */
41#define ISL1208_REG_INT_IM (1<<7) /* interrupt/alarm mode */
42#define ISL1208_REG_09 0x09 /* reserved */
43#define ISL1208_REG_ATR 0x0a
44#define ISL1208_REG_DTR 0x0b
45
46/* alarm section */
47#define ISL1208_REG_SCA 0x0c
48#define ISL1208_REG_MNA 0x0d
49#define ISL1208_REG_HRA 0x0e
50#define ISL1208_REG_DTA 0x0f
51#define ISL1208_REG_MOA 0x10
52#define ISL1208_REG_DWA 0x11
53#define ISL1208_ALARM_SECTION_LEN 6
54
55/* user section */
56#define ISL1208_REG_USR1 0x12
57#define ISL1208_REG_USR2 0x13
58#define ISL1208_USR_SECTION_LEN 2
59
60static struct i2c_driver isl1208_driver;
61
62/* block read */
63static int
64isl1208_i2c_read_regs(struct i2c_client *client, u8 reg, u8 buf[],
65 unsigned len)
66{
67 u8 reg_addr[1] = { reg };
68 struct i2c_msg msgs[2] = {
69 {
70 .addr = client->addr,
71 .len = sizeof(reg_addr),
72 .buf = reg_addr
73 },
74 {
75 .addr = client->addr,
76 .flags = I2C_M_RD,
77 .len = len,
78 .buf = buf
79 }
80 };
81 int ret;
82
83 BUG_ON(reg > ISL1208_REG_USR2);
84 BUG_ON(reg + len > ISL1208_REG_USR2 + 1);
85
86 ret = i2c_transfer(client->adapter, msgs, 2);
87 if (ret > 0)
88 ret = 0;
89 return ret;
90}
91
92/* block write */
93static int
94isl1208_i2c_set_regs(struct i2c_client *client, u8 reg, u8 const buf[],
95 unsigned len)
96{
97 u8 i2c_buf[ISL1208_REG_USR2 + 2];
98 struct i2c_msg msgs[1] = {
99 {
100 .addr = client->addr,
101 .len = len + 1,
102 .buf = i2c_buf
103 }
104 };
105 int ret;
106
107 BUG_ON(reg > ISL1208_REG_USR2);
108 BUG_ON(reg + len > ISL1208_REG_USR2 + 1);
109
110 i2c_buf[0] = reg;
111 memcpy(&i2c_buf[1], &buf[0], len);
112
113 ret = i2c_transfer(client->adapter, msgs, 1);
114 if (ret > 0)
115 ret = 0;
116 return ret;
117}
118
119/* simple check to see whether we have a isl1208 */
120static int
121isl1208_i2c_validate_client(struct i2c_client *client)
122{
123 u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
124 u8 zero_mask[ISL1208_RTC_SECTION_LEN] = {
125 0x80, 0x80, 0x40, 0xc0, 0xe0, 0x00, 0xf8
126 };
127 int i;
128 int ret;
129
130 ret = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
131 if (ret < 0)
132 return ret;
133
134 for (i = 0; i < ISL1208_RTC_SECTION_LEN; ++i) {
135 if (regs[i] & zero_mask[i]) /* check if bits are cleared */
136 return -ENODEV;
137 }
138
139 return 0;
140}
141
142static int
143isl1208_i2c_get_sr(struct i2c_client *client)
144{
145 return i2c_smbus_read_byte_data(client, ISL1208_REG_SR);
146}
147
148static int
149isl1208_i2c_get_atr(struct i2c_client *client)
150{
151 int atr = i2c_smbus_read_byte_data(client, ISL1208_REG_ATR);
152 if (atr < 0)
153 return atr;
154
155 /* The 6bit value in the ATR register controls the load
156 * capacitance C_load * in steps of 0.25pF
157 *
158 * bit (1<<5) of the ATR register is inverted
159 *
160 * C_load(ATR=0x20) = 4.50pF
161 * C_load(ATR=0x00) = 12.50pF
162 * C_load(ATR=0x1f) = 20.25pF
163 *
164 */
165
166 atr &= 0x3f; /* mask out lsb */
167 atr ^= 1 << 5; /* invert 6th bit */
168 atr += 2 * 9; /* add offset of 4.5pF; unit[atr] = 0.25pF */
169
170 return atr;
171}
172
173static int
174isl1208_i2c_get_dtr(struct i2c_client *client)
175{
176 int dtr = i2c_smbus_read_byte_data(client, ISL1208_REG_DTR);
177 if (dtr < 0)
178 return -EIO;
179
180 /* dtr encodes adjustments of {-60,-40,-20,0,20,40,60} ppm */
181 dtr = ((dtr & 0x3) * 20) * (dtr & (1 << 2) ? -1 : 1);
182
183 return dtr;
184}
185
186static int
187isl1208_i2c_get_usr(struct i2c_client *client)
188{
189 u8 buf[ISL1208_USR_SECTION_LEN] = { 0, };
190 int ret;
191
192 ret = isl1208_i2c_read_regs(client, ISL1208_REG_USR1, buf,
193 ISL1208_USR_SECTION_LEN);
194 if (ret < 0)
195 return ret;
196
197 return (buf[1] << 8) | buf[0];
198}
199
200static int
201isl1208_i2c_set_usr(struct i2c_client *client, u16 usr)
202{
203 u8 buf[ISL1208_USR_SECTION_LEN];
204
205 buf[0] = usr & 0xff;
206 buf[1] = (usr >> 8) & 0xff;
207
208 return isl1208_i2c_set_regs(client, ISL1208_REG_USR1, buf,
209 ISL1208_USR_SECTION_LEN);
210}
211
212static int
213isl1208_rtc_toggle_alarm(struct i2c_client *client, int enable)
214{
215 int icr = i2c_smbus_read_byte_data(client, ISL1208_REG_INT);
216
217 if (icr < 0) {
218 dev_err(&client->dev, "%s: reading INT failed\n", __func__);
219 return icr;
220 }
221
222 if (enable)
223 icr |= ISL1208_REG_INT_ALME | ISL1208_REG_INT_IM;
224 else
225 icr &= ~(ISL1208_REG_INT_ALME | ISL1208_REG_INT_IM);
226
227 icr = i2c_smbus_write_byte_data(client, ISL1208_REG_INT, icr);
228 if (icr < 0) {
229 dev_err(&client->dev, "%s: writing INT failed\n", __func__);
230 return icr;
231 }
232
233 return 0;
234}
235
236static int
237isl1208_rtc_proc(struct device *dev, struct seq_file *seq)
238{
239 struct i2c_client *const client = to_i2c_client(dev);
240 int sr, dtr, atr, usr;
241
242 sr = isl1208_i2c_get_sr(client);
243 if (sr < 0) {
244 dev_err(&client->dev, "%s: reading SR failed\n", __func__);
245 return sr;
246 }
247
248 seq_printf(seq, "status_reg\t:%s%s%s%s%s%s (0x%.2x)\n",
249 (sr & ISL1208_REG_SR_RTCF) ? " RTCF" : "",
250 (sr & ISL1208_REG_SR_BAT) ? " BAT" : "",
251 (sr & ISL1208_REG_SR_ALM) ? " ALM" : "",
252 (sr & ISL1208_REG_SR_WRTC) ? " WRTC" : "",
253 (sr & ISL1208_REG_SR_XTOSCB) ? " XTOSCB" : "",
254 (sr & ISL1208_REG_SR_ARST) ? " ARST" : "", sr);
255
256 seq_printf(seq, "batt_status\t: %s\n",
257 (sr & ISL1208_REG_SR_RTCF) ? "bad" : "okay");
258
259 dtr = isl1208_i2c_get_dtr(client);
260 if (dtr >= 0 - 1)
261 seq_printf(seq, "digital_trim\t: %d ppm\n", dtr);
262
263 atr = isl1208_i2c_get_atr(client);
264 if (atr >= 0)
265 seq_printf(seq, "analog_trim\t: %d.%.2d pF\n",
266 atr >> 2, (atr & 0x3) * 25);
267
268 usr = isl1208_i2c_get_usr(client);
269 if (usr >= 0)
270 seq_printf(seq, "user_data\t: 0x%.4x\n", usr);
271
272 return 0;
273}
274
275static int
276isl1208_i2c_read_time(struct i2c_client *client, struct rtc_time *tm)
277{
278 int sr;
279 u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
280
281 sr = isl1208_i2c_get_sr(client);
282 if (sr < 0) {
283 dev_err(&client->dev, "%s: reading SR failed\n", __func__);
284 return -EIO;
285 }
286
287 sr = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
288 if (sr < 0) {
289 dev_err(&client->dev, "%s: reading RTC section failed\n",
290 __func__);
291 return sr;
292 }
293
294 tm->tm_sec = bcd2bin(regs[ISL1208_REG_SC]);
295 tm->tm_min = bcd2bin(regs[ISL1208_REG_MN]);
296
297 /* HR field has a more complex interpretation */
298 {
299 const u8 _hr = regs[ISL1208_REG_HR];
300 if (_hr & ISL1208_REG_HR_MIL) /* 24h format */
301 tm->tm_hour = bcd2bin(_hr & 0x3f);
302 else {
303 /* 12h format */
304 tm->tm_hour = bcd2bin(_hr & 0x1f);
305 if (_hr & ISL1208_REG_HR_PM) /* PM flag set */
306 tm->tm_hour += 12;
307 }
308 }
309
310 tm->tm_mday = bcd2bin(regs[ISL1208_REG_DT]);
311 tm->tm_mon = bcd2bin(regs[ISL1208_REG_MO]) - 1; /* rtc starts at 1 */
312 tm->tm_year = bcd2bin(regs[ISL1208_REG_YR]) + 100;
313 tm->tm_wday = bcd2bin(regs[ISL1208_REG_DW]);
314
315 return 0;
316}
317
318static int
319isl1208_i2c_read_alarm(struct i2c_client *client, struct rtc_wkalrm *alarm)
320{
321 struct rtc_time *const tm = &alarm->time;
322 u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, };
323 int icr, yr, sr = isl1208_i2c_get_sr(client);
324
325 if (sr < 0) {
326 dev_err(&client->dev, "%s: reading SR failed\n", __func__);
327 return sr;
328 }
329
330 sr = isl1208_i2c_read_regs(client, ISL1208_REG_SCA, regs,
331 ISL1208_ALARM_SECTION_LEN);
332 if (sr < 0) {
333 dev_err(&client->dev, "%s: reading alarm section failed\n",
334 __func__);
335 return sr;
336 }
337
338 /* MSB of each alarm register is an enable bit */
339 tm->tm_sec = bcd2bin(regs[ISL1208_REG_SCA - ISL1208_REG_SCA] & 0x7f);
340 tm->tm_min = bcd2bin(regs[ISL1208_REG_MNA - ISL1208_REG_SCA] & 0x7f);
341 tm->tm_hour = bcd2bin(regs[ISL1208_REG_HRA - ISL1208_REG_SCA] & 0x3f);
342 tm->tm_mday = bcd2bin(regs[ISL1208_REG_DTA - ISL1208_REG_SCA] & 0x3f);
343 tm->tm_mon =
344 bcd2bin(regs[ISL1208_REG_MOA - ISL1208_REG_SCA] & 0x1f) - 1;
345 tm->tm_wday = bcd2bin(regs[ISL1208_REG_DWA - ISL1208_REG_SCA] & 0x03);
346
347 /* The alarm doesn't store the year so get it from the rtc section */
348 yr = i2c_smbus_read_byte_data(client, ISL1208_REG_YR);
349 if (yr < 0) {
350 dev_err(&client->dev, "%s: reading RTC YR failed\n", __func__);
351 return yr;
352 }
353 tm->tm_year = bcd2bin(yr) + 100;
354
355 icr = i2c_smbus_read_byte_data(client, ISL1208_REG_INT);
356 if (icr < 0) {
357 dev_err(&client->dev, "%s: reading INT failed\n", __func__);
358 return icr;
359 }
360 alarm->enabled = !!(icr & ISL1208_REG_INT_ALME);
361
362 return 0;
363}
364
365static int
366isl1208_i2c_set_alarm(struct i2c_client *client, struct rtc_wkalrm *alarm)
367{
368 struct rtc_time *alarm_tm = &alarm->time;
369 u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, };
370 const int offs = ISL1208_REG_SCA;
371 struct rtc_time rtc_tm;
372 int err, enable;
373
374 err = isl1208_i2c_read_time(client, &rtc_tm);
375 if (err)
376 return err;
377
378 /* If the alarm time is before the current time disable the alarm */
379 if (!alarm->enabled || rtc_tm_sub(alarm_tm, &rtc_tm) <= 0)
380 enable = 0x00;
381 else
382 enable = 0x80;
383
384 /* Program the alarm and enable it for each setting */
385 regs[ISL1208_REG_SCA - offs] = bin2bcd(alarm_tm->tm_sec) | enable;
386 regs[ISL1208_REG_MNA - offs] = bin2bcd(alarm_tm->tm_min) | enable;
387 regs[ISL1208_REG_HRA - offs] = bin2bcd(alarm_tm->tm_hour) |
388 ISL1208_REG_HR_MIL | enable;
389
390 regs[ISL1208_REG_DTA - offs] = bin2bcd(alarm_tm->tm_mday) | enable;
391 regs[ISL1208_REG_MOA - offs] = bin2bcd(alarm_tm->tm_mon + 1) | enable;
392 regs[ISL1208_REG_DWA - offs] = bin2bcd(alarm_tm->tm_wday & 7) | enable;
393
394 /* write ALARM registers */
395 err = isl1208_i2c_set_regs(client, offs, regs,
396 ISL1208_ALARM_SECTION_LEN);
397 if (err < 0) {
398 dev_err(&client->dev, "%s: writing ALARM section failed\n",
399 __func__);
400 return err;
401 }
402
403 err = isl1208_rtc_toggle_alarm(client, enable);
404 if (err)
405 return err;
406
407 return 0;
408}
409
410static int
411isl1208_rtc_read_time(struct device *dev, struct rtc_time *tm)
412{
413 return isl1208_i2c_read_time(to_i2c_client(dev), tm);
414}
415
416static int
417isl1208_i2c_set_time(struct i2c_client *client, struct rtc_time const *tm)
418{
419 int sr;
420 u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
421
422 /* The clock has an 8 bit wide bcd-coded register (they never learn)
423 * for the year. tm_year is an offset from 1900 and we are interested
424 * in the 2000-2099 range, so any value less than 100 is invalid.
425 */
426 if (tm->tm_year < 100)
427 return -EINVAL;
428
429 regs[ISL1208_REG_SC] = bin2bcd(tm->tm_sec);
430 regs[ISL1208_REG_MN] = bin2bcd(tm->tm_min);
431 regs[ISL1208_REG_HR] = bin2bcd(tm->tm_hour) | ISL1208_REG_HR_MIL;
432
433 regs[ISL1208_REG_DT] = bin2bcd(tm->tm_mday);
434 regs[ISL1208_REG_MO] = bin2bcd(tm->tm_mon + 1);
435 regs[ISL1208_REG_YR] = bin2bcd(tm->tm_year - 100);
436
437 regs[ISL1208_REG_DW] = bin2bcd(tm->tm_wday & 7);
438
439 sr = isl1208_i2c_get_sr(client);
440 if (sr < 0) {
441 dev_err(&client->dev, "%s: reading SR failed\n", __func__);
442 return sr;
443 }
444
445 /* set WRTC */
446 sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR,
447 sr | ISL1208_REG_SR_WRTC);
448 if (sr < 0) {
449 dev_err(&client->dev, "%s: writing SR failed\n", __func__);
450 return sr;
451 }
452
453 /* write RTC registers */
454 sr = isl1208_i2c_set_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
455 if (sr < 0) {
456 dev_err(&client->dev, "%s: writing RTC section failed\n",
457 __func__);
458 return sr;
459 }
460
461 /* clear WRTC again */
462 sr = isl1208_i2c_get_sr(client);
463 if (sr < 0) {
464 dev_err(&client->dev, "%s: reading SR failed\n", __func__);
465 return sr;
466 }
467 sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR,
468 sr & ~ISL1208_REG_SR_WRTC);
469 if (sr < 0) {
470 dev_err(&client->dev, "%s: writing SR failed\n", __func__);
471 return sr;
472 }
473
474 return 0;
475}
476
477
478static int
479isl1208_rtc_set_time(struct device *dev, struct rtc_time *tm)
480{
481 return isl1208_i2c_set_time(to_i2c_client(dev), tm);
482}
483
484static int
485isl1208_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
486{
487 return isl1208_i2c_read_alarm(to_i2c_client(dev), alarm);
488}
489
490static int
491isl1208_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
492{
493 return isl1208_i2c_set_alarm(to_i2c_client(dev), alarm);
494}
495
496static irqreturn_t
497isl1208_rtc_interrupt(int irq, void *data)
498{
499 unsigned long timeout = jiffies + msecs_to_jiffies(1000);
500 struct i2c_client *client = data;
501 struct rtc_device *rtc = i2c_get_clientdata(client);
502 int handled = 0, sr, err;
503
504 /*
505 * I2C reads get NAK'ed if we read straight away after an interrupt?
506 * Using a mdelay/msleep didn't seem to help either, so we work around
507 * this by continually trying to read the register for a short time.
508 */
509 while (1) {
510 sr = isl1208_i2c_get_sr(client);
511 if (sr >= 0)
512 break;
513
514 if (time_after(jiffies, timeout)) {
515 dev_err(&client->dev, "%s: reading SR failed\n",
516 __func__);
517 return sr;
518 }
519 }
520
521 if (sr & ISL1208_REG_SR_ALM) {
522 dev_dbg(&client->dev, "alarm!\n");
523
524 rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF);
525
526 /* Clear the alarm */
527 sr &= ~ISL1208_REG_SR_ALM;
528 sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR, sr);
529 if (sr < 0)
530 dev_err(&client->dev, "%s: writing SR failed\n",
531 __func__);
532 else
533 handled = 1;
534
535 /* Disable the alarm */
536 err = isl1208_rtc_toggle_alarm(client, 0);
537 if (err)
538 return err;
539 }
540
541 return handled ? IRQ_HANDLED : IRQ_NONE;
542}
543
544static const struct rtc_class_ops isl1208_rtc_ops = {
545 .proc = isl1208_rtc_proc,
546 .read_time = isl1208_rtc_read_time,
547 .set_time = isl1208_rtc_set_time,
548 .read_alarm = isl1208_rtc_read_alarm,
549 .set_alarm = isl1208_rtc_set_alarm,
550};
551
552/* sysfs interface */
553
554static ssize_t
555isl1208_sysfs_show_atrim(struct device *dev,
556 struct device_attribute *attr, char *buf)
557{
558 int atr = isl1208_i2c_get_atr(to_i2c_client(dev));
559 if (atr < 0)
560 return atr;
561
562 return sprintf(buf, "%d.%.2d pF\n", atr >> 2, (atr & 0x3) * 25);
563}
564
565static DEVICE_ATTR(atrim, S_IRUGO, isl1208_sysfs_show_atrim, NULL);
566
567static ssize_t
568isl1208_sysfs_show_dtrim(struct device *dev,
569 struct device_attribute *attr, char *buf)
570{
571 int dtr = isl1208_i2c_get_dtr(to_i2c_client(dev));
572 if (dtr < 0)
573 return dtr;
574
575 return sprintf(buf, "%d ppm\n", dtr);
576}
577
578static DEVICE_ATTR(dtrim, S_IRUGO, isl1208_sysfs_show_dtrim, NULL);
579
580static ssize_t
581isl1208_sysfs_show_usr(struct device *dev,
582 struct device_attribute *attr, char *buf)
583{
584 int usr = isl1208_i2c_get_usr(to_i2c_client(dev));
585 if (usr < 0)
586 return usr;
587
588 return sprintf(buf, "0x%.4x\n", usr);
589}
590
591static ssize_t
592isl1208_sysfs_store_usr(struct device *dev,
593 struct device_attribute *attr,
594 const char *buf, size_t count)
595{
596 int usr = -1;
597
598 if (buf[0] == '0' && (buf[1] == 'x' || buf[1] == 'X')) {
599 if (sscanf(buf, "%x", &usr) != 1)
600 return -EINVAL;
601 } else {
602 if (sscanf(buf, "%d", &usr) != 1)
603 return -EINVAL;
604 }
605
606 if (usr < 0 || usr > 0xffff)
607 return -EINVAL;
608
609 return isl1208_i2c_set_usr(to_i2c_client(dev), usr) ? -EIO : count;
610}
611
612static DEVICE_ATTR(usr, S_IRUGO | S_IWUSR, isl1208_sysfs_show_usr,
613 isl1208_sysfs_store_usr);
614
615static struct attribute *isl1208_rtc_attrs[] = {
616 &dev_attr_atrim.attr,
617 &dev_attr_dtrim.attr,
618 &dev_attr_usr.attr,
619 NULL
620};
621
622static const struct attribute_group isl1208_rtc_sysfs_files = {
623 .attrs = isl1208_rtc_attrs,
624};
625
626static int
627isl1208_probe(struct i2c_client *client, const struct i2c_device_id *id)
628{
629 int rc = 0;
630 struct rtc_device *rtc;
631
632 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
633 return -ENODEV;
634
635 if (isl1208_i2c_validate_client(client) < 0)
636 return -ENODEV;
637
638 rtc = devm_rtc_allocate_device(&client->dev);
639 if (IS_ERR(rtc))
640 return PTR_ERR(rtc);
641
642 rtc->ops = &isl1208_rtc_ops;
643
644 i2c_set_clientdata(client, rtc);
645
646 rc = isl1208_i2c_get_sr(client);
647 if (rc < 0) {
648 dev_err(&client->dev, "reading status failed\n");
649 return rc;
650 }
651
652 if (rc & ISL1208_REG_SR_RTCF)
653 dev_warn(&client->dev, "rtc power failure detected, "
654 "please set clock.\n");
655
656 rc = sysfs_create_group(&client->dev.kobj, &isl1208_rtc_sysfs_files);
657 if (rc)
658 return rc;
659
660 if (client->irq > 0) {
661 rc = devm_request_threaded_irq(&client->dev, client->irq, NULL,
662 isl1208_rtc_interrupt,
663 IRQF_SHARED | IRQF_ONESHOT,
664 isl1208_driver.driver.name,
665 client);
666 if (!rc) {
667 device_init_wakeup(&client->dev, 1);
668 enable_irq_wake(client->irq);
669 } else {
670 dev_err(&client->dev,
671 "Unable to request irq %d, no alarm support\n",
672 client->irq);
673 client->irq = 0;
674 }
675 }
676
677 return rtc_register_device(rtc);
678}
679
680static int
681isl1208_remove(struct i2c_client *client)
682{
683 sysfs_remove_group(&client->dev.kobj, &isl1208_rtc_sysfs_files);
684
685 return 0;
686}
687
688static const struct i2c_device_id isl1208_id[] = {
689 { "isl1208", 0 },
690 { "isl1218", 0 },
691 { }
692};
693MODULE_DEVICE_TABLE(i2c, isl1208_id);
694
695static const struct of_device_id isl1208_of_match[] = {
696 { .compatible = "isil,isl1208" },
697 { .compatible = "isil,isl1218" },
698 { }
699};
700MODULE_DEVICE_TABLE(of, isl1208_of_match);
701
702static struct i2c_driver isl1208_driver = {
703 .driver = {
704 .name = "rtc-isl1208",
705 .of_match_table = of_match_ptr(isl1208_of_match),
706 },
707 .probe = isl1208_probe,
708 .remove = isl1208_remove,
709 .id_table = isl1208_id,
710};
711
712module_i2c_driver(isl1208_driver);
713
714MODULE_AUTHOR("Herbert Valerio Riedel <hvr@gnu.org>");
715MODULE_DESCRIPTION("Intersil ISL1208 RTC driver");
716MODULE_LICENSE("GPL");