Loading...
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# PHY Layer Configuration
4#
5
6config PHYLINK
7 tristate
8 depends on NETDEVICES
9 select PHYLIB
10 select SWPHY
11 help
12 PHYlink models the link between the PHY and MAC, allowing fixed
13 configuration links, PHYs, and Serdes links with MAC level
14 autonegotiation modes.
15
16menuconfig PHYLIB
17 tristate "PHY Device support and infrastructure"
18 depends on NETDEVICES
19 select MDIO_DEVICE
20 select MDIO_DEVRES
21 help
22 Ethernet controllers are usually attached to PHY
23 devices. This option provides infrastructure for
24 managing PHY devices.
25
26if PHYLIB
27
28config SWPHY
29 bool
30
31config LED_TRIGGER_PHY
32 bool "Support LED triggers for tracking link state"
33 depends on LEDS_TRIGGERS
34 help
35 Adds support for a set of LED trigger events per-PHY. Link
36 state change will trigger the events, for consumption by an
37 LED class driver. There are triggers for each link speed currently
38 supported by the PHY and also a one common "link" trigger as a
39 logical-or of all the link speed ones.
40 All these triggers are named according to the following pattern:
41 <mii bus id>:<phy>:<speed>
42
43 Where speed is in the form:
44 <Speed in megabits>Mbps OR <Speed in gigabits>Gbps OR link
45 for any speed known to the PHY.
46
47config OPEN_ALLIANCE_HELPERS
48 bool
49
50config PHYLIB_LEDS
51 def_bool OF
52 depends on LEDS_CLASS=y || LEDS_CLASS=PHYLIB
53 help
54 When LED class support is enabled, phylib can automatically
55 probe LED setting from device tree.
56
57config FIXED_PHY
58 tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs"
59 select SWPHY
60 help
61 Adds the platform "fixed" MDIO Bus to cover the boards that use
62 PHYs that are not connected to the real MDIO bus.
63
64 Currently tested with mpc866ads and mpc8349e-mitx.
65
66config RUST_PHYLIB_ABSTRACTIONS
67 bool "Rust PHYLIB abstractions support"
68 depends on RUST
69 depends on PHYLIB=y
70 help
71 Adds support needed for PHY drivers written in Rust. It provides
72 a wrapper around the C phylib core.
73
74config SFP
75 tristate "SFP cage support"
76 depends on I2C && PHYLINK
77 depends on HWMON || HWMON=n
78 select MDIO_I2C
79
80comment "MII PHY device drivers"
81
82config AIR_EN8811H_PHY
83 tristate "Airoha EN8811H 2.5 Gigabit PHY"
84 help
85 Currently supports the Airoha EN8811H PHY.
86
87config AMD_PHY
88 tristate "AMD and Altima PHYs"
89 help
90 Currently supports the AMD am79c874 and Altima AC101L.
91
92config MESON_GXL_PHY
93 tristate "Amlogic Meson GXL Internal PHY"
94 depends on ARCH_MESON || COMPILE_TEST
95 select SMSC_PHY
96 help
97 Currently has a driver for the Amlogic Meson GXL Internal PHY
98
99config ADIN_PHY
100 tristate "Analog Devices Industrial Ethernet PHYs"
101 help
102 Adds support for the Analog Devices Industrial Ethernet PHYs.
103 Currently supports the:
104 - ADIN1200 - Robust,Industrial, Low Power 10/100 Ethernet PHY
105 - ADIN1300 - Robust,Industrial, Low Latency 10/100/1000 Gigabit
106 Ethernet PHY
107
108config ADIN1100_PHY
109 tristate "Analog Devices Industrial Ethernet T1L PHYs"
110 help
111 Adds support for the Analog Devices Industrial T1L Ethernet PHYs.
112 Currently supports the:
113 - ADIN1100 - Robust,Industrial, Low Power 10BASE-T1L Ethernet PHY
114
115config AMCC_QT2025_PHY
116 tristate "AMCC QT2025 PHY"
117 depends on RUST_PHYLIB_ABSTRACTIONS
118 depends on RUST_FW_LOADER_ABSTRACTIONS
119 help
120 Adds support for the Applied Micro Circuits Corporation QT2025 PHY.
121
122source "drivers/net/phy/aquantia/Kconfig"
123
124config AX88796B_PHY
125 tristate "Asix PHYs"
126 help
127 Currently supports the Asix Electronics PHY found in the X-Surf 100
128 AX88796B package.
129
130config AX88796B_RUST_PHY
131 bool "Rust reference driver for Asix PHYs"
132 depends on RUST_PHYLIB_ABSTRACTIONS && AX88796B_PHY
133 help
134 Uses the Rust reference driver for Asix PHYs (ax88796b_rust.ko).
135 The features are equivalent. It supports the Asix Electronics PHY
136 found in the X-Surf 100 AX88796B package.
137
138config BROADCOM_PHY
139 tristate "Broadcom 54XX PHYs"
140 select BCM_NET_PHYLIB
141 select BCM_NET_PHYPTP if NETWORK_PHY_TIMESTAMPING
142 depends on PTP_1588_CLOCK_OPTIONAL
143 help
144 Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
145 BCM5481, BCM54810 and BCM5482 PHYs.
146
147config BCM54140_PHY
148 tristate "Broadcom BCM54140 PHY"
149 depends on HWMON || HWMON=n
150 select BCM_NET_PHYLIB
151 help
152 Support the Broadcom BCM54140 Quad SGMII/QSGMII PHY.
153
154 This driver also supports the hardware monitoring of this PHY and
155 exposes voltage and temperature sensors.
156
157config BCM63XX_PHY
158 tristate "Broadcom 63xx SOCs internal PHY"
159 depends on BCM63XX || COMPILE_TEST
160 select BCM_NET_PHYLIB
161 help
162 Currently supports the 6348 and 6358 PHYs.
163
164config BCM7XXX_PHY
165 tristate "Broadcom 7xxx SOCs internal PHYs"
166 select BCM_NET_PHYLIB
167 help
168 Currently supports the BCM7366, BCM7439, BCM7445, and
169 40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
170
171config BCM84881_PHY
172 tristate "Broadcom BCM84881 PHY"
173 help
174 Support the Broadcom BCM84881 PHY.
175
176config BCM87XX_PHY
177 tristate "Broadcom BCM8706 and BCM8727 PHYs"
178 help
179 Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.
180
181config BCM_CYGNUS_PHY
182 tristate "Broadcom Cygnus/Omega SoC internal PHY"
183 depends on ARCH_BCM_IPROC || COMPILE_TEST
184 depends on MDIO_BCM_IPROC
185 select BCM_NET_PHYLIB
186 help
187 This PHY driver is for the 1G internal PHYs of the Broadcom
188 Cygnus and Omega Family SoC.
189
190 Currently supports internal PHY's used in the BCM11300,
191 BCM11320, BCM11350, BCM11360, BCM58300, BCM58302,
192 BCM58303 & BCM58305 Broadcom Cygnus SoCs.
193
194config BCM_NET_PHYLIB
195 tristate
196
197config BCM_NET_PHYPTP
198 tristate
199
200config CICADA_PHY
201 tristate "Cicada PHYs"
202 help
203 Currently supports the cis8204
204
205config CORTINA_PHY
206 tristate "Cortina EDC CDR 10G Ethernet PHY"
207 help
208 Currently supports the CS4340 phy.
209
210config DAVICOM_PHY
211 tristate "Davicom PHYs"
212 help
213 Currently supports dm9161e and dm9131
214
215config ICPLUS_PHY
216 tristate "ICPlus PHYs"
217 help
218 Currently supports the IP175C and IP1001 PHYs.
219
220config LXT_PHY
221 tristate "Intel LXT PHYs"
222 help
223 Currently supports the lxt970, lxt971
224
225config INTEL_XWAY_PHY
226 tristate "Intel XWAY PHYs"
227 help
228 Supports the Intel XWAY (former Lantiq) 11G and 22E PHYs.
229 These PHYs are marked as standalone chips under the names
230 PEF 7061, PEF 7071 and PEF 7072 or integrated into the Intel
231 SoCs xRX200, xRX300, xRX330, xRX350 and xRX550.
232
233config LSI_ET1011C_PHY
234 tristate "LSI ET1011C PHY"
235 help
236 Supports the LSI ET1011C PHY.
237
238config MARVELL_PHY
239 tristate "Marvell Alaska PHYs"
240 help
241 Currently has a driver for the 88E1XXX
242
243config MARVELL_10G_PHY
244 tristate "Marvell Alaska 10Gbit PHYs"
245 help
246 Support for the Marvell Alaska MV88X3310 and compatible PHYs.
247
248config MARVELL_88Q2XXX_PHY
249 tristate "Marvell 88Q2XXX PHY"
250 depends on HWMON || HWMON=n
251 help
252 Support for the Marvell 88Q2XXX 100/1000BASE-T1 Automotive Ethernet
253 PHYs.
254
255config MARVELL_88X2222_PHY
256 tristate "Marvell 88X2222 PHY"
257 help
258 Support for the Marvell 88X2222 Dual-port Multi-speed Ethernet
259 Transceiver.
260
261config MAXLINEAR_GPHY
262 tristate "Maxlinear Ethernet PHYs"
263 select POLYNOMIAL if HWMON
264 depends on HWMON || HWMON=n
265 help
266 Support for the Maxlinear GPY115, GPY211, GPY212, GPY215,
267 GPY241, GPY245 PHYs.
268
269source "drivers/net/phy/mediatek/Kconfig"
270
271config MICREL_PHY
272 tristate "Micrel PHYs"
273 depends on PTP_1588_CLOCK_OPTIONAL
274 help
275 Supports the KSZ9021, VSC8201, KS8001 PHYs.
276
277config MICROCHIP_T1S_PHY
278 tristate "Microchip 10BASE-T1S Ethernet PHYs"
279 help
280 Currently supports the LAN8670/1/2 Rev.B1/C1/C2 and
281 LAN8650/1 Rev.B0/B1 Internal PHYs.
282
283config MICROCHIP_PHY
284 tristate "Microchip PHYs"
285 help
286 Supports the LAN88XX PHYs.
287
288config MICROCHIP_T1_PHY
289 tristate "Microchip T1 PHYs"
290 help
291 Supports the LAN87XX PHYs.
292
293config MICROSEMI_PHY
294 tristate "Microsemi PHYs"
295 depends on MACSEC || MACSEC=n
296 depends on PTP_1588_CLOCK_OPTIONAL || !NETWORK_PHY_TIMESTAMPING
297 select CRYPTO_LIB_AES if MACSEC
298 help
299 Currently supports VSC8514, VSC8530, VSC8531, VSC8540 and VSC8541 PHYs
300
301config MOTORCOMM_PHY
302 tristate "Motorcomm PHYs"
303 help
304 Enables support for Motorcomm network PHYs.
305 Currently supports YT85xx Gigabit Ethernet PHYs.
306
307config NATIONAL_PHY
308 tristate "National Semiconductor PHYs"
309 help
310 Currently supports the DP83865 PHY.
311
312config NXP_CBTX_PHY
313 tristate "NXP 100BASE-TX PHYs"
314 help
315 Support the 100BASE-TX PHY integrated on the SJA1110 automotive
316 switch family.
317
318config NXP_C45_TJA11XX_PHY
319 tristate "NXP C45 TJA11XX PHYs"
320 depends on PTP_1588_CLOCK_OPTIONAL
321 depends on MACSEC || !MACSEC
322 help
323 Enable support for NXP C45 TJA11XX PHYs.
324 Currently supports the TJA1103, TJA1104 and TJA1120 PHYs.
325
326config NXP_TJA11XX_PHY
327 tristate "NXP TJA11xx PHYs support"
328 depends on HWMON
329 help
330 Currently supports the NXP TJA1100 and TJA1101 PHY.
331
332config NCN26000_PHY
333 tristate "Onsemi 10BASE-T1S Ethernet PHY"
334 help
335 Adds support for the onsemi 10BASE-T1S Ethernet PHY.
336 Currently supports the NCN26000 10BASE-T1S Industrial PHY
337 with MII interface.
338
339source "drivers/net/phy/qcom/Kconfig"
340
341config QSEMI_PHY
342 tristate "Quality Semiconductor PHYs"
343 help
344 Currently supports the qs6612
345
346config REALTEK_PHY
347 tristate "Realtek PHYs"
348 help
349 Supports the Realtek 821x PHY.
350
351config RENESAS_PHY
352 tristate "Renesas PHYs"
353 help
354 Supports the Renesas PHYs uPD60620 and uPD60620A.
355
356config ROCKCHIP_PHY
357 tristate "Rockchip Ethernet PHYs"
358 help
359 Currently supports the integrated Ethernet PHY.
360
361config SMSC_PHY
362 tristate "SMSC PHYs"
363 select CRC16
364 help
365 Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
366
367config STE10XP
368 tristate "STMicroelectronics STe10Xp PHYs"
369 help
370 This is the driver for the STe100p and STe101p PHYs.
371
372config TERANETICS_PHY
373 tristate "Teranetics PHYs"
374 help
375 Currently supports the Teranetics TN2020
376
377config DP83822_PHY
378 tristate "Texas Instruments DP83822/825/826 PHYs"
379 help
380 Supports the DP83822, DP83825I, DP83825CM, DP83825CS, DP83825S,
381 DP83826C and DP83826NC PHYs.
382
383config DP83TC811_PHY
384 tristate "Texas Instruments DP83TC811 PHY"
385 help
386 Supports the DP83TC811 PHY.
387
388config DP83848_PHY
389 tristate "Texas Instruments DP83848 PHY"
390 help
391 Supports the DP83848 PHY.
392
393config DP83867_PHY
394 tristate "Texas Instruments DP83867 Gigabit PHY"
395 help
396 Currently supports the DP83867 PHY.
397
398config DP83869_PHY
399 tristate "Texas Instruments DP83869 Gigabit PHY"
400 help
401 Currently supports the DP83869 PHY. This PHY supports copper and
402 fiber connections.
403
404config DP83TD510_PHY
405 tristate "Texas Instruments DP83TD510 Ethernet 10Base-T1L PHY"
406 help
407 Support for the DP83TD510 Ethernet 10Base-T1L PHY. This PHY supports
408 a 10M single pair Ethernet connection for up to 1000 meter cable.
409
410config DP83TG720_PHY
411 tristate "Texas Instruments DP83TG720 Ethernet 1000Base-T1 PHY"
412 select OPEN_ALLIANCE_HELPERS
413 help
414 The DP83TG720S-Q1 is an automotive Ethernet physical layer
415 transceiver compliant with IEEE 802.3bp and Open Alliance
416 standards. It supports key functions necessary for
417 transmitting and receiving data over both unshielded and
418 shielded single twisted-pair cables. This device offers
419 flexible xMII interface options, including support for both
420 RGMII and SGMII MAC interfaces. It's suitable for applications
421 requiring high-speed data transmission in automotive
422 networking environments.
423
424config VITESSE_PHY
425 tristate "Vitesse PHYs"
426 help
427 Currently supports the vsc8244
428
429config XILINX_GMII2RGMII
430 tristate "Xilinx GMII2RGMII converter driver"
431 help
432 This driver support xilinx GMII to RGMII IP core it provides
433 the Reduced Gigabit Media Independent Interface(RGMII) between
434 Ethernet physical media devices and the Gigabit Ethernet controller.
435
436endif # PHYLIB
437
438config MICREL_KS8995MA
439 tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
440 depends on SPI
1#
2# PHY Layer Configuration
3#
4
5menuconfig MDIO_DEVICE
6 tristate "MDIO bus device drivers"
7 help
8 MDIO devices and driver infrastructure code.
9
10config MDIO_BUS
11 tristate
12 default m if PHYLIB=m
13 default MDIO_DEVICE
14 help
15 This internal symbol is used for link time dependencies and it
16 reflects whether the mdio_bus/mdio_device code is built as a
17 loadable module or built-in.
18
19if MDIO_BUS
20
21config MDIO_BCM_IPROC
22 tristate "Broadcom iProc MDIO bus controller"
23 depends on ARCH_BCM_IPROC || COMPILE_TEST
24 depends on HAS_IOMEM && OF_MDIO
25 help
26 This module provides a driver for the MDIO busses found in the
27 Broadcom iProc SoC's.
28
29config MDIO_BCM_UNIMAC
30 tristate "Broadcom UniMAC MDIO bus controller"
31 depends on HAS_IOMEM && OF_MDIO
32 help
33 This module provides a driver for the Broadcom UniMAC MDIO busses.
34 This hardware can be found in the Broadcom GENET Ethernet MAC
35 controllers as well as some Broadcom Ethernet switches such as the
36 Starfighter 2 switches.
37
38config MDIO_BITBANG
39 tristate "Bitbanged MDIO buses"
40 help
41 This module implements the MDIO bus protocol in software,
42 for use by low level drivers that export the ability to
43 drive the relevant pins.
44
45 If in doubt, say N.
46
47config MDIO_BUS_MUX
48 tristate
49 depends on OF_MDIO
50 help
51 This module provides a driver framework for MDIO bus
52 multiplexers which connect one of several child MDIO busses
53 to a parent bus. Switching between child busses is done by
54 device specific drivers.
55
56config MDIO_BUS_MUX_BCM_IPROC
57 tristate "Broadcom iProc based MDIO bus multiplexers"
58 depends on OF && OF_MDIO && (ARCH_BCM_IPROC || COMPILE_TEST)
59 select MDIO_BUS_MUX
60 default ARCH_BCM_IPROC
61 help
62 This module provides a driver for MDIO bus multiplexers found in
63 iProc based Broadcom SoCs. This multiplexer connects one of several
64 child MDIO bus to a parent bus. Buses could be internal as well as
65 external and selection logic lies inside the same multiplexer.
66
67config MDIO_BUS_MUX_GPIO
68 tristate "GPIO controlled MDIO bus multiplexers"
69 depends on OF_GPIO && OF_MDIO
70 select MDIO_BUS_MUX
71 help
72 This module provides a driver for MDIO bus multiplexers that
73 are controlled via GPIO lines. The multiplexer connects one of
74 several child MDIO busses to a parent bus. Child bus
75 selection is under the control of GPIO lines.
76
77config MDIO_BUS_MUX_MMIOREG
78 tristate "MMIO device-controlled MDIO bus multiplexers"
79 depends on OF_MDIO && HAS_IOMEM
80 select MDIO_BUS_MUX
81 help
82 This module provides a driver for MDIO bus multiplexers that
83 are controlled via a simple memory-mapped device, like an FPGA.
84 The multiplexer connects one of several child MDIO busses to a
85 parent bus. Child bus selection is under the control of one of
86 the FPGA's registers.
87
88 Currently, only 8/16/32 bits registers are supported.
89
90config MDIO_CAVIUM
91 tristate
92
93config MDIO_GPIO
94 tristate "GPIO lib-based bitbanged MDIO buses"
95 depends on MDIO_BITBANG && GPIOLIB
96 ---help---
97 Supports GPIO lib-based MDIO busses.
98
99 To compile this driver as a module, choose M here: the module
100 will be called mdio-gpio.
101
102config MDIO_HISI_FEMAC
103 tristate "Hisilicon FEMAC MDIO bus controller"
104 depends on HAS_IOMEM && OF_MDIO
105 help
106 This module provides a driver for the MDIO busses found in the
107 Hisilicon SoC that have an Fast Ethernet MAC.
108
109config MDIO_I2C
110 tristate
111 depends on I2C
112 help
113 Support I2C based PHYs. This provides a MDIO bus bridged
114 to I2C to allow PHYs connected in I2C mode to be accessed
115 using the existing infrastructure.
116
117 This is library mode.
118
119config MDIO_MOXART
120 tristate "MOXA ART MDIO interface support"
121 depends on ARCH_MOXART
122 help
123 This driver supports the MDIO interface found in the network
124 interface units of the MOXA ART SoC
125
126config MDIO_OCTEON
127 tristate "Octeon and some ThunderX SOCs MDIO buses"
128 depends on 64BIT
129 depends on HAS_IOMEM && OF_MDIO
130 select MDIO_CAVIUM
131 help
132 This module provides a driver for the Octeon and ThunderX MDIO
133 buses. It is required by the Octeon and ThunderX ethernet device
134 drivers on some systems.
135
136config MDIO_SUN4I
137 tristate "Allwinner sun4i MDIO interface support"
138 depends on ARCH_SUNXI
139 help
140 This driver supports the MDIO interface found in the network
141 interface units of the Allwinner SoC that have an EMAC (A10,
142 A12, A10s, etc.)
143
144config MDIO_THUNDER
145 tristate "ThunderX SOCs MDIO buses"
146 depends on 64BIT
147 depends on PCI
148 select MDIO_CAVIUM
149 help
150 This driver supports the MDIO interfaces found on Cavium
151 ThunderX SoCs when the MDIO bus device appears as a PCI
152 device.
153
154config MDIO_XGENE
155 tristate "APM X-Gene SoC MDIO bus controller"
156 depends on ARCH_XGENE || COMPILE_TEST
157 help
158 This module provides a driver for the MDIO busses found in the
159 APM X-Gene SoC's.
160
161endif
162
163config PHYLINK
164 tristate
165 depends on NETDEVICES
166 select PHYLIB
167 select SWPHY
168 help
169 PHYlink models the link between the PHY and MAC, allowing fixed
170 configuration links, PHYs, and Serdes links with MAC level
171 autonegotiation modes.
172
173menuconfig PHYLIB
174 tristate "PHY Device support and infrastructure"
175 depends on NETDEVICES
176 select MDIO_DEVICE
177 help
178 Ethernet controllers are usually attached to PHY
179 devices. This option provides infrastructure for
180 managing PHY devices.
181
182if PHYLIB
183
184config SWPHY
185 bool
186
187config LED_TRIGGER_PHY
188 bool "Support LED triggers for tracking link state"
189 depends on LEDS_TRIGGERS
190 ---help---
191 Adds support for a set of LED trigger events per-PHY. Link
192 state change will trigger the events, for consumption by an
193 LED class driver. There are triggers for each link speed currently
194 supported by the PHY and also a one common "link" trigger as a
195 logical-or of all the link speed ones.
196 All these triggers are named according to the following pattern:
197 <mii bus id>:<phy>:<speed>
198
199 Where speed is in the form:
200 <Speed in megabits>Mbps OR <Speed in gigabits>Gbps OR link
201 for any speed known to the PHY.
202
203
204comment "MII PHY device drivers"
205
206config SFP
207 tristate "SFP cage support"
208 depends on I2C && PHYLINK
209 select MDIO_I2C
210
211config AMD_PHY
212 tristate "AMD PHYs"
213 ---help---
214 Currently supports the am79c874
215
216config AQUANTIA_PHY
217 tristate "Aquantia PHYs"
218 ---help---
219 Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
220
221config AT803X_PHY
222 tristate "AT803X PHYs"
223 ---help---
224 Currently supports the AT8030 and AT8035 model
225
226config BCM63XX_PHY
227 tristate "Broadcom 63xx SOCs internal PHY"
228 depends on BCM63XX
229 select BCM_NET_PHYLIB
230 ---help---
231 Currently supports the 6348 and 6358 PHYs.
232
233config BCM7XXX_PHY
234 tristate "Broadcom 7xxx SOCs internal PHYs"
235 select BCM_NET_PHYLIB
236 ---help---
237 Currently supports the BCM7366, BCM7439, BCM7445, and
238 40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
239
240config BCM87XX_PHY
241 tristate "Broadcom BCM8706 and BCM8727 PHYs"
242 help
243 Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.
244
245config BCM_CYGNUS_PHY
246 tristate "Broadcom Cygnus SoC internal PHY"
247 depends on ARCH_BCM_CYGNUS || COMPILE_TEST
248 depends on MDIO_BCM_IPROC
249 select BCM_NET_PHYLIB
250 ---help---
251 This PHY driver is for the 1G internal PHYs of the Broadcom
252 Cygnus Family SoC.
253
254 Currently supports internal PHY's used in the BCM11300,
255 BCM11320, BCM11350, BCM11360, BCM58300, BCM58302,
256 BCM58303 & BCM58305 Broadcom Cygnus SoCs.
257
258config BCM_NET_PHYLIB
259 tristate
260
261config BROADCOM_PHY
262 tristate "Broadcom PHYs"
263 select BCM_NET_PHYLIB
264 ---help---
265 Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
266 BCM5481, BCM54810 and BCM5482 PHYs.
267
268config CICADA_PHY
269 tristate "Cicada PHYs"
270 ---help---
271 Currently supports the cis8204
272
273config CORTINA_PHY
274 tristate "Cortina EDC CDR 10G Ethernet PHY"
275 ---help---
276 Currently supports the CS4340 phy.
277
278config DAVICOM_PHY
279 tristate "Davicom PHYs"
280 ---help---
281 Currently supports dm9161e and dm9131
282
283config DP83822_PHY
284 tristate "Texas Instruments DP83822 PHY"
285 ---help---
286 Supports the DP83822 PHY.
287
288config DP83848_PHY
289 tristate "Texas Instruments DP83848 PHY"
290 ---help---
291 Supports the DP83848 PHY.
292
293config DP83867_PHY
294 tristate "Texas Instruments DP83867 Gigabit PHY"
295 ---help---
296 Currently supports the DP83867 PHY.
297
298config FIXED_PHY
299 tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs"
300 depends on PHYLIB
301 select SWPHY
302 ---help---
303 Adds the platform "fixed" MDIO Bus to cover the boards that use
304 PHYs that are not connected to the real MDIO bus.
305
306 Currently tested with mpc866ads and mpc8349e-mitx.
307
308config ICPLUS_PHY
309 tristate "ICPlus PHYs"
310 ---help---
311 Currently supports the IP175C and IP1001 PHYs.
312
313config INTEL_XWAY_PHY
314 tristate "Intel XWAY PHYs"
315 ---help---
316 Supports the Intel XWAY (former Lantiq) 11G and 22E PHYs.
317 These PHYs are marked as standalone chips under the names
318 PEF 7061, PEF 7071 and PEF 7072 or integrated into the Intel
319 SoCs xRX200, xRX300, xRX330, xRX350 and xRX550.
320
321config LSI_ET1011C_PHY
322 tristate "LSI ET1011C PHY"
323 ---help---
324 Supports the LSI ET1011C PHY.
325
326config LXT_PHY
327 tristate "Intel LXT PHYs"
328 ---help---
329 Currently supports the lxt970, lxt971
330
331config MARVELL_PHY
332 tristate "Marvell PHYs"
333 ---help---
334 Currently has a driver for the 88E1011S
335
336config MARVELL_10G_PHY
337 tristate "Marvell Alaska 10Gbit PHYs"
338 ---help---
339 Support for the Marvell Alaska MV88X3310 and compatible PHYs.
340
341config MESON_GXL_PHY
342 tristate "Amlogic Meson GXL Internal PHY"
343 depends on ARCH_MESON || COMPILE_TEST
344 ---help---
345 Currently has a driver for the Amlogic Meson GXL Internal PHY
346
347config MICREL_PHY
348 tristate "Micrel PHYs"
349 ---help---
350 Supports the KSZ9021, VSC8201, KS8001 PHYs.
351
352config MICROCHIP_PHY
353 tristate "Microchip PHYs"
354 help
355 Supports the LAN88XX PHYs.
356
357config MICROSEMI_PHY
358 tristate "Microsemi PHYs"
359 ---help---
360 Currently supports VSC8530, VSC8531, VSC8540 and VSC8541 PHYs
361
362config NATIONAL_PHY
363 tristate "National Semiconductor PHYs"
364 ---help---
365 Currently supports the DP83865 PHY.
366
367config QSEMI_PHY
368 tristate "Quality Semiconductor PHYs"
369 ---help---
370 Currently supports the qs6612
371
372config REALTEK_PHY
373 tristate "Realtek PHYs"
374 ---help---
375 Supports the Realtek 821x PHY.
376
377config RENESAS_PHY
378 tristate "Driver for Renesas PHYs"
379 ---help---
380 Supports the Renesas PHYs uPD60620 and uPD60620A.
381
382config ROCKCHIP_PHY
383 tristate "Driver for Rockchip Ethernet PHYs"
384 ---help---
385 Currently supports the integrated Ethernet PHY.
386
387config SMSC_PHY
388 tristate "SMSC PHYs"
389 ---help---
390 Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
391
392config STE10XP
393 tristate "STMicroelectronics STe10Xp PHYs"
394 ---help---
395 This is the driver for the STe100p and STe101p PHYs.
396
397config TERANETICS_PHY
398 tristate "Teranetics PHYs"
399 ---help---
400 Currently supports the Teranetics TN2020
401
402config VITESSE_PHY
403 tristate "Vitesse PHYs"
404 ---help---
405 Currently supports the vsc8244
406
407config XILINX_GMII2RGMII
408 tristate "Xilinx GMII2RGMII converter driver"
409 ---help---
410 This driver support xilinx GMII to RGMII IP core it provides
411 the Reduced Gigabit Media Independent Interface(RGMII) between
412 Ethernet physical media devices and the Gigabit Ethernet controller.
413
414endif # PHYLIB
415
416config MICREL_KS8995MA
417 tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
418 depends on SPI