Loading...
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# QLogic network device configuration
4#
5
6config NET_VENDOR_QLOGIC
7 bool "QLogic devices"
8 default y
9 depends on PCI
10 help
11 If you have a network (Ethernet) card belonging to this class, say Y.
12
13 Note that the answer to this question doesn't directly affect the
14 kernel: saying N will just cause the configurator to skip all
15 the questions about QLogic cards. If you say Y, you will be asked for
16 your specific card in the following questions.
17
18if NET_VENDOR_QLOGIC
19
20config QLA3XXX
21 tristate "QLogic QLA3XXX Network Driver Support"
22 depends on PCI
23 help
24 This driver supports QLogic ISP3XXX gigabit Ethernet cards.
25
26 To compile this driver as a module, choose M here: the module
27 will be called qla3xxx.
28
29config QLCNIC
30 tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
31 depends on PCI
32 select FW_LOADER
33 help
34 This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
35 devices.
36
37config QLCNIC_SRIOV
38 bool "QLOGIC QLCNIC 83XX family SR-IOV Support"
39 depends on QLCNIC && PCI_IOV
40 default y
41 help
42 This configuration parameter enables Single Root Input Output
43 Virtualization support for QLE83XX Converged Ethernet devices.
44 This allows for virtual function acceleration in virtualized
45 environments.
46
47config QLCNIC_DCB
48 bool "QLOGIC QLCNIC 82XX and 83XX family DCB Support"
49 depends on QLCNIC && DCB
50 default y
51 help
52 This configuration parameter enables DCB support in QLE83XX
53 and QLE82XX Converged Ethernet devices. This allows for DCB
54 get operations support through rtNetlink interface. Only CEE
55 mode of DCB is supported. PG and PFC values are related only
56 to Tx.
57
58config QLCNIC_HWMON
59 bool "QLOGIC QLCNIC 82XX and 83XX family HWMON support"
60 depends on QLCNIC && HWMON && !(QLCNIC=y && HWMON=m)
61 default y
62 help
63 This configuration parameter can be used to read the
64 board temperature in Converged Ethernet devices
65 supported by qlcnic.
66
67 This data is available via the hwmon sysfs interface.
68
69config NETXEN_NIC
70 tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
71 depends on PCI
72 select FW_LOADER
73 help
74 This enables the support for NetXen's Gigabit Ethernet card.
75
76config QED
77 tristate "QLogic QED 25/40/100Gb core driver"
78 depends on PCI
79 select ZLIB_INFLATE
80 select CRC8
81 select CRC32
82 select NET_DEVLINK
83 help
84 This enables the support for Marvell FastLinQ adapters family.
85
86config QED_LL2
87 bool
88
89config QED_SRIOV
90 bool "QLogic QED 25/40/100Gb SR-IOV support"
91 depends on QED && PCI_IOV
92 default y
93 help
94 This configuration parameter enables Single Root Input Output
95 Virtualization support for QED devices.
96 This allows for virtual function acceleration in virtualized
97 environments.
98
99config QEDE
100 tristate "QLogic QED 25/40/100Gb Ethernet NIC"
101 depends on QED
102 depends on PTP_1588_CLOCK_OPTIONAL
103 help
104 This enables the support for Marvell FastLinQ adapters family,
105 ethernet driver.
106
107config QED_RDMA
108 bool
109
110config QED_ISCSI
111 bool
112
113config QED_NVMETCP
114 bool
115
116config QED_FCOE
117 bool
118
119config QED_OOO
120 bool
121
122endif # NET_VENDOR_QLOGIC
1#
2# QLogic network device configuration
3#
4
5config NET_VENDOR_QLOGIC
6 bool "QLogic devices"
7 default y
8 depends on PCI
9 ---help---
10 If you have a network (Ethernet) card belonging to this class, say Y.
11
12 Note that the answer to this question doesn't directly affect the
13 kernel: saying N will just cause the configurator to skip all
14 the questions about QLogic cards. If you say Y, you will be asked for
15 your specific card in the following questions.
16
17if NET_VENDOR_QLOGIC
18
19config QLA3XXX
20 tristate "QLogic QLA3XXX Network Driver Support"
21 depends on PCI
22 ---help---
23 This driver supports QLogic ISP3XXX gigabit Ethernet cards.
24
25 To compile this driver as a module, choose M here: the module
26 will be called qla3xxx.
27
28config QLCNIC
29 tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
30 depends on PCI
31 select FW_LOADER
32 ---help---
33 This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
34 devices.
35
36config QLCNIC_SRIOV
37 bool "QLOGIC QLCNIC 83XX family SR-IOV Support"
38 depends on QLCNIC && PCI_IOV
39 default y
40 ---help---
41 This configuration parameter enables Single Root Input Output
42 Virtualization support for QLE83XX Converged Ethernet devices.
43 This allows for virtual function acceleration in virtualized
44 environments.
45
46config QLCNIC_DCB
47 bool "QLOGIC QLCNIC 82XX and 83XX family DCB Support"
48 depends on QLCNIC && DCB
49 default y
50 ---help---
51 This configuration parameter enables DCB support in QLE83XX
52 and QLE82XX Converged Ethernet devices. This allows for DCB
53 get operations support through rtNetlink interface. Only CEE
54 mode of DCB is supported. PG and PFC values are related only
55 to Tx.
56
57config QLCNIC_HWMON
58 bool "QLOGIC QLCNIC 82XX and 83XX family HWMON support"
59 depends on QLCNIC && HWMON && !(QLCNIC=y && HWMON=m)
60 default y
61 ---help---
62 This configuration parameter can be used to read the
63 board temperature in Converged Ethernet devices
64 supported by qlcnic.
65
66 This data is available via the hwmon sysfs interface.
67
68config QLGE
69 tristate "QLogic QLGE 10Gb Ethernet Driver Support"
70 depends on PCI
71 ---help---
72 This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
73
74 To compile this driver as a module, choose M here: the module
75 will be called qlge.
76
77config NETXEN_NIC
78 tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
79 depends on PCI
80 select FW_LOADER
81 ---help---
82 This enables the support for NetXen's Gigabit Ethernet card.
83
84config QED
85 tristate "QLogic QED 25/40/100Gb core driver"
86 depends on PCI
87 select ZLIB_INFLATE
88 select CRC8
89 ---help---
90 This enables the support for ...
91
92config QED_LL2
93 bool
94
95config QED_SRIOV
96 bool "QLogic QED 25/40/100Gb SR-IOV support"
97 depends on QED && PCI_IOV
98 default y
99 ---help---
100 This configuration parameter enables Single Root Input Output
101 Virtualization support for QED devices.
102 This allows for virtual function acceleration in virtualized
103 environments.
104
105config QEDE
106 tristate "QLogic QED 25/40/100Gb Ethernet NIC"
107 depends on QED
108 imply PTP_1588_CLOCK
109 ---help---
110 This enables the support for ...
111
112config QED_RDMA
113 bool
114
115config QED_ISCSI
116 bool
117
118config QED_FCOE
119 bool
120
121config QED_OOO
122 bool
123
124endif # NET_VENDOR_QLOGIC