Loading...
Note: File does not exist in v4.17.
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Sony imx412 Camera Sensor Driver
4 *
5 * Copyright (C) 2021 Intel Corporation
6 */
7#include <linux/unaligned.h>
8
9#include <linux/clk.h>
10#include <linux/delay.h>
11#include <linux/i2c.h>
12#include <linux/module.h>
13#include <linux/pm_runtime.h>
14#include <linux/regulator/consumer.h>
15
16#include <media/v4l2-ctrls.h>
17#include <media/v4l2-fwnode.h>
18#include <media/v4l2-subdev.h>
19
20/* Streaming Mode */
21#define IMX412_REG_MODE_SELECT 0x0100
22#define IMX412_MODE_STANDBY 0x00
23#define IMX412_MODE_STREAMING 0x01
24
25/* Lines per frame */
26#define IMX412_REG_LPFR 0x0340
27
28/* Chip ID */
29#define IMX412_REG_ID 0x0016
30#define IMX412_ID 0x577
31
32/* Exposure control */
33#define IMX412_REG_EXPOSURE_CIT 0x0202
34#define IMX412_EXPOSURE_MIN 8
35#define IMX412_EXPOSURE_OFFSET 22
36#define IMX412_EXPOSURE_STEP 1
37#define IMX412_EXPOSURE_DEFAULT 0x0648
38
39/* Analog gain control */
40#define IMX412_REG_AGAIN 0x0204
41#define IMX412_AGAIN_MIN 0
42#define IMX412_AGAIN_MAX 978
43#define IMX412_AGAIN_STEP 1
44#define IMX412_AGAIN_DEFAULT 0
45
46/* Group hold register */
47#define IMX412_REG_HOLD 0x0104
48
49/* Input clock rate */
50#define IMX412_INCLK_RATE 24000000
51
52/* CSI2 HW configuration */
53#define IMX412_LINK_FREQ 600000000
54#define IMX412_NUM_DATA_LANES 4
55
56#define IMX412_REG_MIN 0x00
57#define IMX412_REG_MAX 0xffff
58
59/**
60 * struct imx412_reg - imx412 sensor register
61 * @address: Register address
62 * @val: Register value
63 */
64struct imx412_reg {
65 u16 address;
66 u8 val;
67};
68
69/**
70 * struct imx412_reg_list - imx412 sensor register list
71 * @num_of_regs: Number of registers in the list
72 * @regs: Pointer to register list
73 */
74struct imx412_reg_list {
75 u32 num_of_regs;
76 const struct imx412_reg *regs;
77};
78
79/**
80 * struct imx412_mode - imx412 sensor mode structure
81 * @width: Frame width
82 * @height: Frame height
83 * @code: Format code
84 * @hblank: Horizontal blanking in lines
85 * @vblank: Vertical blanking in lines
86 * @vblank_min: Minimum vertical blanking in lines
87 * @vblank_max: Maximum vertical blanking in lines
88 * @pclk: Sensor pixel clock
89 * @link_freq_idx: Link frequency index
90 * @reg_list: Register list for sensor mode
91 */
92struct imx412_mode {
93 u32 width;
94 u32 height;
95 u32 code;
96 u32 hblank;
97 u32 vblank;
98 u32 vblank_min;
99 u32 vblank_max;
100 u64 pclk;
101 u32 link_freq_idx;
102 struct imx412_reg_list reg_list;
103};
104
105static const char * const imx412_supply_names[] = {
106 "dovdd", /* Digital I/O power */
107 "avdd", /* Analog power */
108 "dvdd", /* Digital core power */
109};
110
111/**
112 * struct imx412 - imx412 sensor device structure
113 * @dev: Pointer to generic device
114 * @client: Pointer to i2c client
115 * @sd: V4L2 sub-device
116 * @pad: Media pad. Only one pad supported
117 * @reset_gpio: Sensor reset gpio
118 * @inclk: Sensor input clock
119 * @supplies: Regulator supplies
120 * @ctrl_handler: V4L2 control handler
121 * @link_freq_ctrl: Pointer to link frequency control
122 * @pclk_ctrl: Pointer to pixel clock control
123 * @hblank_ctrl: Pointer to horizontal blanking control
124 * @vblank_ctrl: Pointer to vertical blanking control
125 * @exp_ctrl: Pointer to exposure control
126 * @again_ctrl: Pointer to analog gain control
127 * @vblank: Vertical blanking in lines
128 * @cur_mode: Pointer to current selected sensor mode
129 * @mutex: Mutex for serializing sensor controls
130 */
131struct imx412 {
132 struct device *dev;
133 struct i2c_client *client;
134 struct v4l2_subdev sd;
135 struct media_pad pad;
136 struct gpio_desc *reset_gpio;
137 struct clk *inclk;
138 struct regulator_bulk_data supplies[ARRAY_SIZE(imx412_supply_names)];
139 struct v4l2_ctrl_handler ctrl_handler;
140 struct v4l2_ctrl *link_freq_ctrl;
141 struct v4l2_ctrl *pclk_ctrl;
142 struct v4l2_ctrl *hblank_ctrl;
143 struct v4l2_ctrl *vblank_ctrl;
144 struct {
145 struct v4l2_ctrl *exp_ctrl;
146 struct v4l2_ctrl *again_ctrl;
147 };
148 u32 vblank;
149 const struct imx412_mode *cur_mode;
150 struct mutex mutex;
151};
152
153static const s64 link_freq[] = {
154 IMX412_LINK_FREQ,
155};
156
157/* Sensor mode registers */
158static const struct imx412_reg mode_4056x3040_regs[] = {
159 {0x0136, 0x18},
160 {0x0137, 0x00},
161 {0x3c7e, 0x08},
162 {0x3c7f, 0x02},
163 {0x38a8, 0x1f},
164 {0x38a9, 0xff},
165 {0x38aa, 0x1f},
166 {0x38ab, 0xff},
167 {0x55d4, 0x00},
168 {0x55d5, 0x00},
169 {0x55d6, 0x07},
170 {0x55d7, 0xff},
171 {0x55e8, 0x07},
172 {0x55e9, 0xff},
173 {0x55ea, 0x00},
174 {0x55eb, 0x00},
175 {0x575c, 0x07},
176 {0x575d, 0xff},
177 {0x575e, 0x00},
178 {0x575f, 0x00},
179 {0x5764, 0x00},
180 {0x5765, 0x00},
181 {0x5766, 0x07},
182 {0x5767, 0xff},
183 {0x5974, 0x04},
184 {0x5975, 0x01},
185 {0x5f10, 0x09},
186 {0x5f11, 0x92},
187 {0x5f12, 0x32},
188 {0x5f13, 0x72},
189 {0x5f14, 0x16},
190 {0x5f15, 0xba},
191 {0x5f17, 0x13},
192 {0x5f18, 0x24},
193 {0x5f19, 0x60},
194 {0x5f1a, 0xe3},
195 {0x5f1b, 0xad},
196 {0x5f1c, 0x74},
197 {0x5f2d, 0x25},
198 {0x5f5c, 0xd0},
199 {0x6a22, 0x00},
200 {0x6a23, 0x1d},
201 {0x7ba8, 0x00},
202 {0x7ba9, 0x00},
203 {0x886b, 0x00},
204 {0x9002, 0x0a},
205 {0x9004, 0x1a},
206 {0x9214, 0x93},
207 {0x9215, 0x69},
208 {0x9216, 0x93},
209 {0x9217, 0x6b},
210 {0x9218, 0x93},
211 {0x9219, 0x6d},
212 {0x921a, 0x57},
213 {0x921b, 0x58},
214 {0x921c, 0x57},
215 {0x921d, 0x59},
216 {0x921e, 0x57},
217 {0x921f, 0x5a},
218 {0x9220, 0x57},
219 {0x9221, 0x5b},
220 {0x9222, 0x93},
221 {0x9223, 0x02},
222 {0x9224, 0x93},
223 {0x9225, 0x03},
224 {0x9226, 0x93},
225 {0x9227, 0x04},
226 {0x9228, 0x93},
227 {0x9229, 0x05},
228 {0x922a, 0x98},
229 {0x922b, 0x21},
230 {0x922c, 0xb2},
231 {0x922d, 0xdb},
232 {0x922e, 0xb2},
233 {0x922f, 0xdc},
234 {0x9230, 0xb2},
235 {0x9231, 0xdd},
236 {0x9232, 0xe2},
237 {0x9233, 0xe1},
238 {0x9234, 0xb2},
239 {0x9235, 0xe2},
240 {0x9236, 0xb2},
241 {0x9237, 0xe3},
242 {0x9238, 0xb7},
243 {0x9239, 0xb9},
244 {0x923a, 0xb7},
245 {0x923b, 0xbb},
246 {0x923c, 0xb7},
247 {0x923d, 0xbc},
248 {0x923e, 0xb7},
249 {0x923f, 0xc5},
250 {0x9240, 0xb7},
251 {0x9241, 0xc7},
252 {0x9242, 0xb7},
253 {0x9243, 0xc9},
254 {0x9244, 0x98},
255 {0x9245, 0x56},
256 {0x9246, 0x98},
257 {0x9247, 0x55},
258 {0x9380, 0x00},
259 {0x9381, 0x62},
260 {0x9382, 0x00},
261 {0x9383, 0x56},
262 {0x9384, 0x00},
263 {0x9385, 0x52},
264 {0x9388, 0x00},
265 {0x9389, 0x55},
266 {0x938a, 0x00},
267 {0x938b, 0x55},
268 {0x938c, 0x00},
269 {0x938d, 0x41},
270 {0x5078, 0x01},
271 {0x0112, 0x0a},
272 {0x0113, 0x0a},
273 {0x0114, 0x03},
274 {0x0342, 0x11},
275 {0x0343, 0xa0},
276 {0x0340, 0x0d},
277 {0x0341, 0xda},
278 {0x3210, 0x00},
279 {0x0344, 0x00},
280 {0x0345, 0x00},
281 {0x0346, 0x00},
282 {0x0347, 0x00},
283 {0x0348, 0x0f},
284 {0x0349, 0xd7},
285 {0x034a, 0x0b},
286 {0x034b, 0xdf},
287 {0x00e3, 0x00},
288 {0x00e4, 0x00},
289 {0x00e5, 0x01},
290 {0x00fc, 0x0a},
291 {0x00fd, 0x0a},
292 {0x00fe, 0x0a},
293 {0x00ff, 0x0a},
294 {0xe013, 0x00},
295 {0x0220, 0x00},
296 {0x0221, 0x11},
297 {0x0381, 0x01},
298 {0x0383, 0x01},
299 {0x0385, 0x01},
300 {0x0387, 0x01},
301 {0x0900, 0x00},
302 {0x0901, 0x11},
303 {0x0902, 0x00},
304 {0x3140, 0x02},
305 {0x3241, 0x11},
306 {0x3250, 0x03},
307 {0x3e10, 0x00},
308 {0x3e11, 0x00},
309 {0x3f0d, 0x00},
310 {0x3f42, 0x00},
311 {0x3f43, 0x00},
312 {0x0401, 0x00},
313 {0x0404, 0x00},
314 {0x0405, 0x10},
315 {0x0408, 0x00},
316 {0x0409, 0x00},
317 {0x040a, 0x00},
318 {0x040b, 0x00},
319 {0x040c, 0x0f},
320 {0x040d, 0xd8},
321 {0x040e, 0x0b},
322 {0x040f, 0xe0},
323 {0x034c, 0x0f},
324 {0x034d, 0xd8},
325 {0x034e, 0x0b},
326 {0x034f, 0xe0},
327 {0x0301, 0x05},
328 {0x0303, 0x02},
329 {0x0305, 0x04},
330 {0x0306, 0x00},
331 {0x0307, 0xc8},
332 {0x0309, 0x0a},
333 {0x030b, 0x01},
334 {0x030d, 0x02},
335 {0x030e, 0x01},
336 {0x030f, 0x5e},
337 {0x0310, 0x00},
338 {0x0820, 0x12},
339 {0x0821, 0xc0},
340 {0x0822, 0x00},
341 {0x0823, 0x00},
342 {0x3e20, 0x01},
343 {0x3e37, 0x00},
344 {0x3f50, 0x00},
345 {0x3f56, 0x00},
346 {0x3f57, 0xe2},
347 {0x3c0a, 0x5a},
348 {0x3c0b, 0x55},
349 {0x3c0c, 0x28},
350 {0x3c0d, 0x07},
351 {0x3c0e, 0xff},
352 {0x3c0f, 0x00},
353 {0x3c10, 0x00},
354 {0x3c11, 0x02},
355 {0x3c12, 0x00},
356 {0x3c13, 0x03},
357 {0x3c14, 0x00},
358 {0x3c15, 0x00},
359 {0x3c16, 0x0c},
360 {0x3c17, 0x0c},
361 {0x3c18, 0x0c},
362 {0x3c19, 0x0a},
363 {0x3c1a, 0x0a},
364 {0x3c1b, 0x0a},
365 {0x3c1c, 0x00},
366 {0x3c1d, 0x00},
367 {0x3c1e, 0x00},
368 {0x3c1f, 0x00},
369 {0x3c20, 0x00},
370 {0x3c21, 0x00},
371 {0x3c22, 0x3f},
372 {0x3c23, 0x0a},
373 {0x3e35, 0x01},
374 {0x3f4a, 0x03},
375 {0x3f4b, 0xbf},
376 {0x3f26, 0x00},
377 {0x0202, 0x0d},
378 {0x0203, 0xc4},
379 {0x0204, 0x00},
380 {0x0205, 0x00},
381 {0x020e, 0x01},
382 {0x020f, 0x00},
383 {0x0210, 0x01},
384 {0x0211, 0x00},
385 {0x0212, 0x01},
386 {0x0213, 0x00},
387 {0x0214, 0x01},
388 {0x0215, 0x00},
389 {0xbcf1, 0x00},
390};
391
392/* Supported sensor mode configurations */
393static const struct imx412_mode supported_mode = {
394 .width = 4056,
395 .height = 3040,
396 .hblank = 456,
397 .vblank = 506,
398 .vblank_min = 506,
399 .vblank_max = 32420,
400 .pclk = 480000000,
401 .link_freq_idx = 0,
402 .code = MEDIA_BUS_FMT_SRGGB10_1X10,
403 .reg_list = {
404 .num_of_regs = ARRAY_SIZE(mode_4056x3040_regs),
405 .regs = mode_4056x3040_regs,
406 },
407};
408
409/**
410 * to_imx412() - imx412 V4L2 sub-device to imx412 device.
411 * @subdev: pointer to imx412 V4L2 sub-device
412 *
413 * Return: pointer to imx412 device
414 */
415static inline struct imx412 *to_imx412(struct v4l2_subdev *subdev)
416{
417 return container_of(subdev, struct imx412, sd);
418}
419
420/**
421 * imx412_read_reg() - Read registers.
422 * @imx412: pointer to imx412 device
423 * @reg: register address
424 * @len: length of bytes to read. Max supported bytes is 4
425 * @val: pointer to register value to be filled.
426 *
427 * Return: 0 if successful, error code otherwise.
428 */
429static int imx412_read_reg(struct imx412 *imx412, u16 reg, u32 len, u32 *val)
430{
431 struct i2c_client *client = v4l2_get_subdevdata(&imx412->sd);
432 struct i2c_msg msgs[2] = {0};
433 u8 addr_buf[2] = {0};
434 u8 data_buf[4] = {0};
435 int ret;
436
437 if (WARN_ON(len > 4))
438 return -EINVAL;
439
440 put_unaligned_be16(reg, addr_buf);
441
442 /* Write register address */
443 msgs[0].addr = client->addr;
444 msgs[0].flags = 0;
445 msgs[0].len = ARRAY_SIZE(addr_buf);
446 msgs[0].buf = addr_buf;
447
448 /* Read data from register */
449 msgs[1].addr = client->addr;
450 msgs[1].flags = I2C_M_RD;
451 msgs[1].len = len;
452 msgs[1].buf = &data_buf[4 - len];
453
454 ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
455 if (ret != ARRAY_SIZE(msgs))
456 return -EIO;
457
458 *val = get_unaligned_be32(data_buf);
459
460 return 0;
461}
462
463/**
464 * imx412_write_reg() - Write register
465 * @imx412: pointer to imx412 device
466 * @reg: register address
467 * @len: length of bytes. Max supported bytes is 4
468 * @val: register value
469 *
470 * Return: 0 if successful, error code otherwise.
471 */
472static int imx412_write_reg(struct imx412 *imx412, u16 reg, u32 len, u32 val)
473{
474 struct i2c_client *client = v4l2_get_subdevdata(&imx412->sd);
475 u8 buf[6] = {0};
476
477 if (WARN_ON(len > 4))
478 return -EINVAL;
479
480 put_unaligned_be16(reg, buf);
481 put_unaligned_be32(val << (8 * (4 - len)), buf + 2);
482 if (i2c_master_send(client, buf, len + 2) != len + 2)
483 return -EIO;
484
485 return 0;
486}
487
488/**
489 * imx412_write_regs() - Write a list of registers
490 * @imx412: pointer to imx412 device
491 * @regs: list of registers to be written
492 * @len: length of registers array
493 *
494 * Return: 0 if successful, error code otherwise.
495 */
496static int imx412_write_regs(struct imx412 *imx412,
497 const struct imx412_reg *regs, u32 len)
498{
499 unsigned int i;
500 int ret;
501
502 for (i = 0; i < len; i++) {
503 ret = imx412_write_reg(imx412, regs[i].address, 1, regs[i].val);
504 if (ret)
505 return ret;
506 }
507
508 return 0;
509}
510
511/**
512 * imx412_update_controls() - Update control ranges based on streaming mode
513 * @imx412: pointer to imx412 device
514 * @mode: pointer to imx412_mode sensor mode
515 *
516 * Return: 0 if successful, error code otherwise.
517 */
518static int imx412_update_controls(struct imx412 *imx412,
519 const struct imx412_mode *mode)
520{
521 int ret;
522
523 ret = __v4l2_ctrl_s_ctrl(imx412->link_freq_ctrl, mode->link_freq_idx);
524 if (ret)
525 return ret;
526
527 ret = __v4l2_ctrl_s_ctrl(imx412->hblank_ctrl, mode->hblank);
528 if (ret)
529 return ret;
530
531 return __v4l2_ctrl_modify_range(imx412->vblank_ctrl, mode->vblank_min,
532 mode->vblank_max, 1, mode->vblank);
533}
534
535/**
536 * imx412_update_exp_gain() - Set updated exposure and gain
537 * @imx412: pointer to imx412 device
538 * @exposure: updated exposure value
539 * @gain: updated analog gain value
540 *
541 * Return: 0 if successful, error code otherwise.
542 */
543static int imx412_update_exp_gain(struct imx412 *imx412, u32 exposure, u32 gain)
544{
545 u32 lpfr;
546 int ret;
547
548 lpfr = imx412->vblank + imx412->cur_mode->height;
549
550 dev_dbg(imx412->dev, "Set exp %u, analog gain %u, lpfr %u\n",
551 exposure, gain, lpfr);
552
553 ret = imx412_write_reg(imx412, IMX412_REG_HOLD, 1, 1);
554 if (ret)
555 return ret;
556
557 ret = imx412_write_reg(imx412, IMX412_REG_LPFR, 2, lpfr);
558 if (ret)
559 goto error_release_group_hold;
560
561 ret = imx412_write_reg(imx412, IMX412_REG_EXPOSURE_CIT, 2, exposure);
562 if (ret)
563 goto error_release_group_hold;
564
565 ret = imx412_write_reg(imx412, IMX412_REG_AGAIN, 2, gain);
566
567error_release_group_hold:
568 imx412_write_reg(imx412, IMX412_REG_HOLD, 1, 0);
569
570 return ret;
571}
572
573/**
574 * imx412_set_ctrl() - Set subdevice control
575 * @ctrl: pointer to v4l2_ctrl structure
576 *
577 * Supported controls:
578 * - V4L2_CID_VBLANK
579 * - cluster controls:
580 * - V4L2_CID_ANALOGUE_GAIN
581 * - V4L2_CID_EXPOSURE
582 *
583 * Return: 0 if successful, error code otherwise.
584 */
585static int imx412_set_ctrl(struct v4l2_ctrl *ctrl)
586{
587 struct imx412 *imx412 =
588 container_of(ctrl->handler, struct imx412, ctrl_handler);
589 u32 analog_gain;
590 u32 exposure;
591 int ret;
592
593 switch (ctrl->id) {
594 case V4L2_CID_VBLANK:
595 imx412->vblank = imx412->vblank_ctrl->val;
596
597 dev_dbg(imx412->dev, "Received vblank %u, new lpfr %u\n",
598 imx412->vblank,
599 imx412->vblank + imx412->cur_mode->height);
600
601 ret = __v4l2_ctrl_modify_range(imx412->exp_ctrl,
602 IMX412_EXPOSURE_MIN,
603 imx412->vblank +
604 imx412->cur_mode->height -
605 IMX412_EXPOSURE_OFFSET,
606 1, IMX412_EXPOSURE_DEFAULT);
607 break;
608 case V4L2_CID_EXPOSURE:
609 /* Set controls only if sensor is in power on state */
610 if (!pm_runtime_get_if_in_use(imx412->dev))
611 return 0;
612
613 exposure = ctrl->val;
614 analog_gain = imx412->again_ctrl->val;
615
616 dev_dbg(imx412->dev, "Received exp %u, analog gain %u\n",
617 exposure, analog_gain);
618
619 ret = imx412_update_exp_gain(imx412, exposure, analog_gain);
620
621 pm_runtime_put(imx412->dev);
622
623 break;
624 default:
625 dev_err(imx412->dev, "Invalid control %d\n", ctrl->id);
626 ret = -EINVAL;
627 }
628
629 return ret;
630}
631
632/* V4l2 subdevice control ops*/
633static const struct v4l2_ctrl_ops imx412_ctrl_ops = {
634 .s_ctrl = imx412_set_ctrl,
635};
636
637/**
638 * imx412_enum_mbus_code() - Enumerate V4L2 sub-device mbus codes
639 * @sd: pointer to imx412 V4L2 sub-device structure
640 * @sd_state: V4L2 sub-device configuration
641 * @code: V4L2 sub-device code enumeration need to be filled
642 *
643 * Return: 0 if successful, error code otherwise.
644 */
645static int imx412_enum_mbus_code(struct v4l2_subdev *sd,
646 struct v4l2_subdev_state *sd_state,
647 struct v4l2_subdev_mbus_code_enum *code)
648{
649 if (code->index > 0)
650 return -EINVAL;
651
652 code->code = supported_mode.code;
653
654 return 0;
655}
656
657/**
658 * imx412_enum_frame_size() - Enumerate V4L2 sub-device frame sizes
659 * @sd: pointer to imx412 V4L2 sub-device structure
660 * @sd_state: V4L2 sub-device configuration
661 * @fsize: V4L2 sub-device size enumeration need to be filled
662 *
663 * Return: 0 if successful, error code otherwise.
664 */
665static int imx412_enum_frame_size(struct v4l2_subdev *sd,
666 struct v4l2_subdev_state *sd_state,
667 struct v4l2_subdev_frame_size_enum *fsize)
668{
669 if (fsize->index > 0)
670 return -EINVAL;
671
672 if (fsize->code != supported_mode.code)
673 return -EINVAL;
674
675 fsize->min_width = supported_mode.width;
676 fsize->max_width = fsize->min_width;
677 fsize->min_height = supported_mode.height;
678 fsize->max_height = fsize->min_height;
679
680 return 0;
681}
682
683/**
684 * imx412_fill_pad_format() - Fill subdevice pad format
685 * from selected sensor mode
686 * @imx412: pointer to imx412 device
687 * @mode: pointer to imx412_mode sensor mode
688 * @fmt: V4L2 sub-device format need to be filled
689 */
690static void imx412_fill_pad_format(struct imx412 *imx412,
691 const struct imx412_mode *mode,
692 struct v4l2_subdev_format *fmt)
693{
694 fmt->format.width = mode->width;
695 fmt->format.height = mode->height;
696 fmt->format.code = mode->code;
697 fmt->format.field = V4L2_FIELD_NONE;
698 fmt->format.colorspace = V4L2_COLORSPACE_RAW;
699 fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
700 fmt->format.quantization = V4L2_QUANTIZATION_DEFAULT;
701 fmt->format.xfer_func = V4L2_XFER_FUNC_NONE;
702}
703
704/**
705 * imx412_get_pad_format() - Get subdevice pad format
706 * @sd: pointer to imx412 V4L2 sub-device structure
707 * @sd_state: V4L2 sub-device configuration
708 * @fmt: V4L2 sub-device format need to be set
709 *
710 * Return: 0 if successful, error code otherwise.
711 */
712static int imx412_get_pad_format(struct v4l2_subdev *sd,
713 struct v4l2_subdev_state *sd_state,
714 struct v4l2_subdev_format *fmt)
715{
716 struct imx412 *imx412 = to_imx412(sd);
717
718 mutex_lock(&imx412->mutex);
719
720 if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
721 struct v4l2_mbus_framefmt *framefmt;
722
723 framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad);
724 fmt->format = *framefmt;
725 } else {
726 imx412_fill_pad_format(imx412, imx412->cur_mode, fmt);
727 }
728
729 mutex_unlock(&imx412->mutex);
730
731 return 0;
732}
733
734/**
735 * imx412_set_pad_format() - Set subdevice pad format
736 * @sd: pointer to imx412 V4L2 sub-device structure
737 * @sd_state: V4L2 sub-device configuration
738 * @fmt: V4L2 sub-device format need to be set
739 *
740 * Return: 0 if successful, error code otherwise.
741 */
742static int imx412_set_pad_format(struct v4l2_subdev *sd,
743 struct v4l2_subdev_state *sd_state,
744 struct v4l2_subdev_format *fmt)
745{
746 struct imx412 *imx412 = to_imx412(sd);
747 const struct imx412_mode *mode;
748 int ret = 0;
749
750 mutex_lock(&imx412->mutex);
751
752 mode = &supported_mode;
753 imx412_fill_pad_format(imx412, mode, fmt);
754
755 if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
756 struct v4l2_mbus_framefmt *framefmt;
757
758 framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad);
759 *framefmt = fmt->format;
760 } else {
761 ret = imx412_update_controls(imx412, mode);
762 if (!ret)
763 imx412->cur_mode = mode;
764 }
765
766 mutex_unlock(&imx412->mutex);
767
768 return ret;
769}
770
771/**
772 * imx412_init_state() - Initialize sub-device state
773 * @sd: pointer to imx412 V4L2 sub-device structure
774 * @sd_state: V4L2 sub-device configuration
775 *
776 * Return: 0 if successful, error code otherwise.
777 */
778static int imx412_init_state(struct v4l2_subdev *sd,
779 struct v4l2_subdev_state *sd_state)
780{
781 struct imx412 *imx412 = to_imx412(sd);
782 struct v4l2_subdev_format fmt = { 0 };
783
784 fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
785 imx412_fill_pad_format(imx412, &supported_mode, &fmt);
786
787 return imx412_set_pad_format(sd, sd_state, &fmt);
788}
789
790/**
791 * imx412_start_streaming() - Start sensor stream
792 * @imx412: pointer to imx412 device
793 *
794 * Return: 0 if successful, error code otherwise.
795 */
796static int imx412_start_streaming(struct imx412 *imx412)
797{
798 const struct imx412_reg_list *reg_list;
799 int ret;
800
801 /* Write sensor mode registers */
802 reg_list = &imx412->cur_mode->reg_list;
803 ret = imx412_write_regs(imx412, reg_list->regs,
804 reg_list->num_of_regs);
805 if (ret) {
806 dev_err(imx412->dev, "fail to write initial registers\n");
807 return ret;
808 }
809
810 /* Setup handler will write actual exposure and gain */
811 ret = __v4l2_ctrl_handler_setup(imx412->sd.ctrl_handler);
812 if (ret) {
813 dev_err(imx412->dev, "fail to setup handler\n");
814 return ret;
815 }
816
817 /* Delay is required before streaming*/
818 usleep_range(7400, 8000);
819
820 /* Start streaming */
821 ret = imx412_write_reg(imx412, IMX412_REG_MODE_SELECT,
822 1, IMX412_MODE_STREAMING);
823 if (ret) {
824 dev_err(imx412->dev, "fail to start streaming\n");
825 return ret;
826 }
827
828 return 0;
829}
830
831/**
832 * imx412_stop_streaming() - Stop sensor stream
833 * @imx412: pointer to imx412 device
834 *
835 * Return: 0 if successful, error code otherwise.
836 */
837static int imx412_stop_streaming(struct imx412 *imx412)
838{
839 return imx412_write_reg(imx412, IMX412_REG_MODE_SELECT,
840 1, IMX412_MODE_STANDBY);
841}
842
843/**
844 * imx412_set_stream() - Enable sensor streaming
845 * @sd: pointer to imx412 subdevice
846 * @enable: set to enable sensor streaming
847 *
848 * Return: 0 if successful, error code otherwise.
849 */
850static int imx412_set_stream(struct v4l2_subdev *sd, int enable)
851{
852 struct imx412 *imx412 = to_imx412(sd);
853 int ret;
854
855 mutex_lock(&imx412->mutex);
856
857 if (enable) {
858 ret = pm_runtime_resume_and_get(imx412->dev);
859 if (ret)
860 goto error_unlock;
861
862 ret = imx412_start_streaming(imx412);
863 if (ret)
864 goto error_power_off;
865 } else {
866 imx412_stop_streaming(imx412);
867 pm_runtime_put(imx412->dev);
868 }
869
870 mutex_unlock(&imx412->mutex);
871
872 return 0;
873
874error_power_off:
875 pm_runtime_put(imx412->dev);
876error_unlock:
877 mutex_unlock(&imx412->mutex);
878
879 return ret;
880}
881
882/**
883 * imx412_detect() - Detect imx412 sensor
884 * @imx412: pointer to imx412 device
885 *
886 * Return: 0 if successful, -EIO if sensor id does not match
887 */
888static int imx412_detect(struct imx412 *imx412)
889{
890 int ret;
891 u32 val;
892
893 ret = imx412_read_reg(imx412, IMX412_REG_ID, 2, &val);
894 if (ret)
895 return ret;
896
897 if (val != IMX412_ID) {
898 dev_err(imx412->dev, "chip id mismatch: %x!=%x\n",
899 IMX412_ID, val);
900 return -ENXIO;
901 }
902
903 return 0;
904}
905
906/**
907 * imx412_parse_hw_config() - Parse HW configuration and check if supported
908 * @imx412: pointer to imx412 device
909 *
910 * Return: 0 if successful, error code otherwise.
911 */
912static int imx412_parse_hw_config(struct imx412 *imx412)
913{
914 struct fwnode_handle *fwnode = dev_fwnode(imx412->dev);
915 struct v4l2_fwnode_endpoint bus_cfg = {
916 .bus_type = V4L2_MBUS_CSI2_DPHY
917 };
918 struct fwnode_handle *ep;
919 unsigned long rate;
920 unsigned int i;
921 int ret;
922
923 if (!fwnode)
924 return -ENXIO;
925
926 /* Request optional reset pin */
927 imx412->reset_gpio = devm_gpiod_get_optional(imx412->dev, "reset",
928 GPIOD_OUT_LOW);
929 if (IS_ERR(imx412->reset_gpio)) {
930 dev_err(imx412->dev, "failed to get reset gpio %ld\n",
931 PTR_ERR(imx412->reset_gpio));
932 return PTR_ERR(imx412->reset_gpio);
933 }
934
935 /* Get sensor input clock */
936 imx412->inclk = devm_clk_get(imx412->dev, NULL);
937 if (IS_ERR(imx412->inclk)) {
938 dev_err(imx412->dev, "could not get inclk\n");
939 return PTR_ERR(imx412->inclk);
940 }
941
942 rate = clk_get_rate(imx412->inclk);
943 if (rate != IMX412_INCLK_RATE) {
944 dev_err(imx412->dev, "inclk frequency mismatch\n");
945 return -EINVAL;
946 }
947
948 /* Get optional DT defined regulators */
949 for (i = 0; i < ARRAY_SIZE(imx412_supply_names); i++)
950 imx412->supplies[i].supply = imx412_supply_names[i];
951
952 ret = devm_regulator_bulk_get(imx412->dev,
953 ARRAY_SIZE(imx412_supply_names),
954 imx412->supplies);
955 if (ret)
956 return ret;
957
958 ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
959 if (!ep)
960 return -ENXIO;
961
962 ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
963 fwnode_handle_put(ep);
964 if (ret)
965 return ret;
966
967 if (bus_cfg.bus.mipi_csi2.num_data_lanes != IMX412_NUM_DATA_LANES) {
968 dev_err(imx412->dev,
969 "number of CSI2 data lanes %d is not supported\n",
970 bus_cfg.bus.mipi_csi2.num_data_lanes);
971 ret = -EINVAL;
972 goto done_endpoint_free;
973 }
974
975 if (!bus_cfg.nr_of_link_frequencies) {
976 dev_err(imx412->dev, "no link frequencies defined\n");
977 ret = -EINVAL;
978 goto done_endpoint_free;
979 }
980
981 for (i = 0; i < bus_cfg.nr_of_link_frequencies; i++)
982 if (bus_cfg.link_frequencies[i] == IMX412_LINK_FREQ)
983 goto done_endpoint_free;
984
985 ret = -EINVAL;
986
987done_endpoint_free:
988 v4l2_fwnode_endpoint_free(&bus_cfg);
989
990 return ret;
991}
992
993/* V4l2 subdevice ops */
994static const struct v4l2_subdev_video_ops imx412_video_ops = {
995 .s_stream = imx412_set_stream,
996};
997
998static const struct v4l2_subdev_pad_ops imx412_pad_ops = {
999 .enum_mbus_code = imx412_enum_mbus_code,
1000 .enum_frame_size = imx412_enum_frame_size,
1001 .get_fmt = imx412_get_pad_format,
1002 .set_fmt = imx412_set_pad_format,
1003};
1004
1005static const struct v4l2_subdev_ops imx412_subdev_ops = {
1006 .video = &imx412_video_ops,
1007 .pad = &imx412_pad_ops,
1008};
1009
1010static const struct v4l2_subdev_internal_ops imx412_internal_ops = {
1011 .init_state = imx412_init_state,
1012};
1013
1014/**
1015 * imx412_power_on() - Sensor power on sequence
1016 * @dev: pointer to i2c device
1017 *
1018 * Return: 0 if successful, error code otherwise.
1019 */
1020static int imx412_power_on(struct device *dev)
1021{
1022 struct v4l2_subdev *sd = dev_get_drvdata(dev);
1023 struct imx412 *imx412 = to_imx412(sd);
1024 int ret;
1025
1026 ret = regulator_bulk_enable(ARRAY_SIZE(imx412_supply_names),
1027 imx412->supplies);
1028 if (ret < 0) {
1029 dev_err(dev, "failed to enable regulators\n");
1030 return ret;
1031 }
1032
1033 gpiod_set_value_cansleep(imx412->reset_gpio, 0);
1034
1035 ret = clk_prepare_enable(imx412->inclk);
1036 if (ret) {
1037 dev_err(imx412->dev, "fail to enable inclk\n");
1038 goto error_reset;
1039 }
1040
1041 usleep_range(1000, 1200);
1042
1043 return 0;
1044
1045error_reset:
1046 gpiod_set_value_cansleep(imx412->reset_gpio, 1);
1047 regulator_bulk_disable(ARRAY_SIZE(imx412_supply_names),
1048 imx412->supplies);
1049
1050 return ret;
1051}
1052
1053/**
1054 * imx412_power_off() - Sensor power off sequence
1055 * @dev: pointer to i2c device
1056 *
1057 * Return: 0 if successful, error code otherwise.
1058 */
1059static int imx412_power_off(struct device *dev)
1060{
1061 struct v4l2_subdev *sd = dev_get_drvdata(dev);
1062 struct imx412 *imx412 = to_imx412(sd);
1063
1064 clk_disable_unprepare(imx412->inclk);
1065
1066 gpiod_set_value_cansleep(imx412->reset_gpio, 1);
1067
1068 regulator_bulk_disable(ARRAY_SIZE(imx412_supply_names),
1069 imx412->supplies);
1070
1071 return 0;
1072}
1073
1074/**
1075 * imx412_init_controls() - Initialize sensor subdevice controls
1076 * @imx412: pointer to imx412 device
1077 *
1078 * Return: 0 if successful, error code otherwise.
1079 */
1080static int imx412_init_controls(struct imx412 *imx412)
1081{
1082 struct v4l2_ctrl_handler *ctrl_hdlr = &imx412->ctrl_handler;
1083 const struct imx412_mode *mode = imx412->cur_mode;
1084 u32 lpfr;
1085 int ret;
1086
1087 ret = v4l2_ctrl_handler_init(ctrl_hdlr, 6);
1088 if (ret)
1089 return ret;
1090
1091 /* Serialize controls with sensor device */
1092 ctrl_hdlr->lock = &imx412->mutex;
1093
1094 /* Initialize exposure and gain */
1095 lpfr = mode->vblank + mode->height;
1096 imx412->exp_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
1097 &imx412_ctrl_ops,
1098 V4L2_CID_EXPOSURE,
1099 IMX412_EXPOSURE_MIN,
1100 lpfr - IMX412_EXPOSURE_OFFSET,
1101 IMX412_EXPOSURE_STEP,
1102 IMX412_EXPOSURE_DEFAULT);
1103
1104 imx412->again_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
1105 &imx412_ctrl_ops,
1106 V4L2_CID_ANALOGUE_GAIN,
1107 IMX412_AGAIN_MIN,
1108 IMX412_AGAIN_MAX,
1109 IMX412_AGAIN_STEP,
1110 IMX412_AGAIN_DEFAULT);
1111
1112 v4l2_ctrl_cluster(2, &imx412->exp_ctrl);
1113
1114 imx412->vblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
1115 &imx412_ctrl_ops,
1116 V4L2_CID_VBLANK,
1117 mode->vblank_min,
1118 mode->vblank_max,
1119 1, mode->vblank);
1120
1121 /* Read only controls */
1122 imx412->pclk_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
1123 &imx412_ctrl_ops,
1124 V4L2_CID_PIXEL_RATE,
1125 mode->pclk, mode->pclk,
1126 1, mode->pclk);
1127
1128 imx412->link_freq_ctrl = v4l2_ctrl_new_int_menu(ctrl_hdlr,
1129 &imx412_ctrl_ops,
1130 V4L2_CID_LINK_FREQ,
1131 ARRAY_SIZE(link_freq) -
1132 1,
1133 mode->link_freq_idx,
1134 link_freq);
1135 if (imx412->link_freq_ctrl)
1136 imx412->link_freq_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
1137
1138 imx412->hblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
1139 &imx412_ctrl_ops,
1140 V4L2_CID_HBLANK,
1141 IMX412_REG_MIN,
1142 IMX412_REG_MAX,
1143 1, mode->hblank);
1144 if (imx412->hblank_ctrl)
1145 imx412->hblank_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
1146
1147 if (ctrl_hdlr->error) {
1148 dev_err(imx412->dev, "control init failed: %d\n",
1149 ctrl_hdlr->error);
1150 v4l2_ctrl_handler_free(ctrl_hdlr);
1151 return ctrl_hdlr->error;
1152 }
1153
1154 imx412->sd.ctrl_handler = ctrl_hdlr;
1155
1156 return 0;
1157}
1158
1159/**
1160 * imx412_probe() - I2C client device binding
1161 * @client: pointer to i2c client device
1162 *
1163 * Return: 0 if successful, error code otherwise.
1164 */
1165static int imx412_probe(struct i2c_client *client)
1166{
1167 struct imx412 *imx412;
1168 const char *name;
1169 int ret;
1170
1171 imx412 = devm_kzalloc(&client->dev, sizeof(*imx412), GFP_KERNEL);
1172 if (!imx412)
1173 return -ENOMEM;
1174
1175 imx412->dev = &client->dev;
1176 name = device_get_match_data(&client->dev);
1177 if (!name)
1178 return -ENODEV;
1179
1180 /* Initialize subdev */
1181 v4l2_i2c_subdev_init(&imx412->sd, client, &imx412_subdev_ops);
1182 imx412->sd.internal_ops = &imx412_internal_ops;
1183
1184 ret = imx412_parse_hw_config(imx412);
1185 if (ret) {
1186 dev_err(imx412->dev, "HW configuration is not supported\n");
1187 return ret;
1188 }
1189
1190 mutex_init(&imx412->mutex);
1191
1192 ret = imx412_power_on(imx412->dev);
1193 if (ret) {
1194 dev_err(imx412->dev, "failed to power-on the sensor\n");
1195 goto error_mutex_destroy;
1196 }
1197
1198 /* Check module identity */
1199 ret = imx412_detect(imx412);
1200 if (ret) {
1201 dev_err(imx412->dev, "failed to find sensor: %d\n", ret);
1202 goto error_power_off;
1203 }
1204
1205 /* Set default mode to max resolution */
1206 imx412->cur_mode = &supported_mode;
1207 imx412->vblank = imx412->cur_mode->vblank;
1208
1209 ret = imx412_init_controls(imx412);
1210 if (ret) {
1211 dev_err(imx412->dev, "failed to init controls: %d\n", ret);
1212 goto error_power_off;
1213 }
1214
1215 /* Initialize subdev */
1216 imx412->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
1217 imx412->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
1218
1219 v4l2_i2c_subdev_set_name(&imx412->sd, client, name, NULL);
1220
1221 /* Initialize source pad */
1222 imx412->pad.flags = MEDIA_PAD_FL_SOURCE;
1223 ret = media_entity_pads_init(&imx412->sd.entity, 1, &imx412->pad);
1224 if (ret) {
1225 dev_err(imx412->dev, "failed to init entity pads: %d\n", ret);
1226 goto error_handler_free;
1227 }
1228
1229 ret = v4l2_async_register_subdev_sensor(&imx412->sd);
1230 if (ret < 0) {
1231 dev_err(imx412->dev,
1232 "failed to register async subdev: %d\n", ret);
1233 goto error_media_entity;
1234 }
1235
1236 pm_runtime_set_active(imx412->dev);
1237 pm_runtime_enable(imx412->dev);
1238 pm_runtime_idle(imx412->dev);
1239
1240 return 0;
1241
1242error_media_entity:
1243 media_entity_cleanup(&imx412->sd.entity);
1244error_handler_free:
1245 v4l2_ctrl_handler_free(imx412->sd.ctrl_handler);
1246error_power_off:
1247 imx412_power_off(imx412->dev);
1248error_mutex_destroy:
1249 mutex_destroy(&imx412->mutex);
1250
1251 return ret;
1252}
1253
1254/**
1255 * imx412_remove() - I2C client device unbinding
1256 * @client: pointer to I2C client device
1257 *
1258 * Return: 0 if successful, error code otherwise.
1259 */
1260static void imx412_remove(struct i2c_client *client)
1261{
1262 struct v4l2_subdev *sd = i2c_get_clientdata(client);
1263 struct imx412 *imx412 = to_imx412(sd);
1264
1265 v4l2_async_unregister_subdev(sd);
1266 media_entity_cleanup(&sd->entity);
1267 v4l2_ctrl_handler_free(sd->ctrl_handler);
1268
1269 pm_runtime_disable(&client->dev);
1270 if (!pm_runtime_status_suspended(&client->dev))
1271 imx412_power_off(&client->dev);
1272 pm_runtime_set_suspended(&client->dev);
1273
1274 mutex_destroy(&imx412->mutex);
1275}
1276
1277static const struct dev_pm_ops imx412_pm_ops = {
1278 SET_RUNTIME_PM_OPS(imx412_power_off, imx412_power_on, NULL)
1279};
1280
1281static const struct of_device_id imx412_of_match[] = {
1282 { .compatible = "sony,imx412", .data = "imx412" },
1283 { .compatible = "sony,imx577", .data = "imx577" },
1284 { }
1285};
1286
1287MODULE_DEVICE_TABLE(of, imx412_of_match);
1288
1289static struct i2c_driver imx412_driver = {
1290 .probe = imx412_probe,
1291 .remove = imx412_remove,
1292 .driver = {
1293 .name = "imx412",
1294 .pm = &imx412_pm_ops,
1295 .of_match_table = imx412_of_match,
1296 },
1297};
1298
1299module_i2c_driver(imx412_driver);
1300
1301MODULE_DESCRIPTION("Sony imx412 sensor driver");
1302MODULE_LICENSE("GPL");