Linux Audio

Check our new training course

Loading...
v6.13.7
  1/*
  2 * Copyright (c) 2016 Intel Corporation
  3 *
  4 * Permission to use, copy, modify, distribute, and sell this software and its
  5 * documentation for any purpose is hereby granted without fee, provided that
  6 * the above copyright notice appear in all copies and that both that copyright
  7 * notice and this permission notice appear in supporting documentation, and
  8 * that the name of the copyright holders not be used in advertising or
  9 * publicity pertaining to distribution of the software without specific,
 10 * written prior permission.  The copyright holders make no representations
 11 * about the suitability of this software for any purpose.  It is provided "as
 12 * is" without express or implied warranty.
 13 *
 14 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
 15 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
 16 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
 17 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
 18 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
 19 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
 20 * OF THIS SOFTWARE.
 21 */
 22
 23#include <linux/uaccess.h>
 24
 25#include <drm/drm_drv.h>
 26#include <drm/drm_encoder.h>
 27#include <drm/drm_file.h>
 28#include <drm/drm_framebuffer.h>
 29#include <drm/drm_managed.h>
 30#include <drm/drm_mode_config.h>
 31#include <drm/drm_print.h>
 32#include <linux/dma-resv.h>
 33
 34#include "drm_crtc_internal.h"
 35#include "drm_internal.h"
 36
 37int drm_modeset_register_all(struct drm_device *dev)
 38{
 39	int ret;
 40
 41	ret = drm_plane_register_all(dev);
 42	if (ret)
 43		goto err_plane;
 44
 45	ret = drm_crtc_register_all(dev);
 46	if  (ret)
 47		goto err_crtc;
 48
 49	ret = drm_encoder_register_all(dev);
 50	if (ret)
 51		goto err_encoder;
 52
 53	ret = drm_connector_register_all(dev);
 54	if (ret)
 55		goto err_connector;
 56
 57	return 0;
 58
 59err_connector:
 60	drm_encoder_unregister_all(dev);
 61err_encoder:
 62	drm_crtc_unregister_all(dev);
 63err_crtc:
 64	drm_plane_unregister_all(dev);
 65err_plane:
 66	return ret;
 67}
 68
 69void drm_modeset_unregister_all(struct drm_device *dev)
 70{
 71	drm_connector_unregister_all(dev);
 72	drm_encoder_unregister_all(dev);
 73	drm_crtc_unregister_all(dev);
 74	drm_plane_unregister_all(dev);
 75}
 76
 77/**
 78 * drm_mode_getresources - get graphics configuration
 79 * @dev: drm device for the ioctl
 80 * @data: data pointer for the ioctl
 81 * @file_priv: drm file for the ioctl call
 82 *
 83 * Construct a set of configuration description structures and return
 84 * them to the user, including CRTC, connector and framebuffer configuration.
 85 *
 86 * Called by the user via ioctl.
 87 *
 88 * Returns:
 89 * Zero on success, negative errno on failure.
 90 */
 91int drm_mode_getresources(struct drm_device *dev, void *data,
 92			  struct drm_file *file_priv)
 93{
 94	struct drm_mode_card_res *card_res = data;
 95	struct drm_framebuffer *fb;
 96	struct drm_connector *connector;
 97	struct drm_crtc *crtc;
 98	struct drm_encoder *encoder;
 99	int count, ret = 0;
100	uint32_t __user *fb_id;
101	uint32_t __user *crtc_id;
102	uint32_t __user *connector_id;
103	uint32_t __user *encoder_id;
104	struct drm_connector_list_iter conn_iter;
105
106	if (!drm_core_check_feature(dev, DRIVER_MODESET))
107		return -EOPNOTSUPP;
 
108
109	mutex_lock(&file_priv->fbs_lock);
110	count = 0;
111	fb_id = u64_to_user_ptr(card_res->fb_id_ptr);
112	list_for_each_entry(fb, &file_priv->fbs, filp_head) {
113		if (count < card_res->count_fbs &&
114		    put_user(fb->base.id, fb_id + count)) {
115			mutex_unlock(&file_priv->fbs_lock);
116			return -EFAULT;
117		}
118		count++;
119	}
120	card_res->count_fbs = count;
121	mutex_unlock(&file_priv->fbs_lock);
122
123	card_res->max_height = dev->mode_config.max_height;
124	card_res->min_height = dev->mode_config.min_height;
125	card_res->max_width = dev->mode_config.max_width;
126	card_res->min_width = dev->mode_config.min_width;
127
128	count = 0;
129	crtc_id = u64_to_user_ptr(card_res->crtc_id_ptr);
130	drm_for_each_crtc(crtc, dev) {
131		if (drm_lease_held(file_priv, crtc->base.id)) {
132			if (count < card_res->count_crtcs &&
133			    put_user(crtc->base.id, crtc_id + count))
134				return -EFAULT;
135			count++;
136		}
137	}
138	card_res->count_crtcs = count;
139
140	count = 0;
141	encoder_id = u64_to_user_ptr(card_res->encoder_id_ptr);
142	drm_for_each_encoder(encoder, dev) {
143		if (count < card_res->count_encoders &&
144		    put_user(encoder->base.id, encoder_id + count))
145			return -EFAULT;
146		count++;
147	}
148	card_res->count_encoders = count;
149
150	drm_connector_list_iter_begin(dev, &conn_iter);
151	count = 0;
152	connector_id = u64_to_user_ptr(card_res->connector_id_ptr);
153	drm_for_each_connector_iter(connector, &conn_iter) {
154		/* only expose writeback connectors if userspace understands them */
155		if (!file_priv->writeback_connectors &&
156		    (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK))
157			continue;
158
159		if (drm_lease_held(file_priv, connector->base.id)) {
160			if (count < card_res->count_connectors &&
161			    put_user(connector->base.id, connector_id + count)) {
162				drm_connector_list_iter_end(&conn_iter);
163				return -EFAULT;
164			}
165			count++;
166		}
167	}
168	card_res->count_connectors = count;
169	drm_connector_list_iter_end(&conn_iter);
170
171	return ret;
172}
173
174/**
175 * drm_mode_config_reset - call ->reset callbacks
176 * @dev: drm device
177 *
178 * This functions calls all the crtc's, encoder's and connector's ->reset
179 * callback. Drivers can use this in e.g. their driver load or resume code to
180 * reset hardware and software state.
181 */
182void drm_mode_config_reset(struct drm_device *dev)
183{
184	struct drm_crtc *crtc;
185	struct drm_plane *plane;
186	struct drm_encoder *encoder;
187	struct drm_connector *connector;
188	struct drm_connector_list_iter conn_iter;
189
190	drm_for_each_plane(plane, dev)
191		if (plane->funcs->reset)
192			plane->funcs->reset(plane);
193
194	drm_for_each_crtc(crtc, dev)
195		if (crtc->funcs->reset)
196			crtc->funcs->reset(crtc);
197
198	drm_for_each_encoder(encoder, dev)
199		if (encoder->funcs && encoder->funcs->reset)
200			encoder->funcs->reset(encoder);
201
202	drm_connector_list_iter_begin(dev, &conn_iter);
203	drm_for_each_connector_iter(connector, &conn_iter)
204		if (connector->funcs->reset)
205			connector->funcs->reset(connector);
206	drm_connector_list_iter_end(&conn_iter);
207}
208EXPORT_SYMBOL(drm_mode_config_reset);
209
210/*
211 * Global properties
212 */
213static const struct drm_prop_enum_list drm_plane_type_enum_list[] = {
214	{ DRM_PLANE_TYPE_OVERLAY, "Overlay" },
215	{ DRM_PLANE_TYPE_PRIMARY, "Primary" },
216	{ DRM_PLANE_TYPE_CURSOR, "Cursor" },
217};
218
219static int drm_mode_create_standard_properties(struct drm_device *dev)
220{
221	struct drm_property *prop;
222	int ret;
223
224	ret = drm_connector_create_standard_properties(dev);
225	if (ret)
226		return ret;
227
228	prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
229					"type", drm_plane_type_enum_list,
230					ARRAY_SIZE(drm_plane_type_enum_list));
231	if (!prop)
232		return -ENOMEM;
233	dev->mode_config.plane_type_property = prop;
234
235	prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
236			"SRC_X", 0, UINT_MAX);
237	if (!prop)
238		return -ENOMEM;
239	dev->mode_config.prop_src_x = prop;
240
241	prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
242			"SRC_Y", 0, UINT_MAX);
243	if (!prop)
244		return -ENOMEM;
245	dev->mode_config.prop_src_y = prop;
246
247	prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
248			"SRC_W", 0, UINT_MAX);
249	if (!prop)
250		return -ENOMEM;
251	dev->mode_config.prop_src_w = prop;
252
253	prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
254			"SRC_H", 0, UINT_MAX);
255	if (!prop)
256		return -ENOMEM;
257	dev->mode_config.prop_src_h = prop;
258
259	prop = drm_property_create_signed_range(dev, DRM_MODE_PROP_ATOMIC,
260			"CRTC_X", INT_MIN, INT_MAX);
261	if (!prop)
262		return -ENOMEM;
263	dev->mode_config.prop_crtc_x = prop;
264
265	prop = drm_property_create_signed_range(dev, DRM_MODE_PROP_ATOMIC,
266			"CRTC_Y", INT_MIN, INT_MAX);
267	if (!prop)
268		return -ENOMEM;
269	dev->mode_config.prop_crtc_y = prop;
270
271	prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
272			"CRTC_W", 0, INT_MAX);
273	if (!prop)
274		return -ENOMEM;
275	dev->mode_config.prop_crtc_w = prop;
276
277	prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
278			"CRTC_H", 0, INT_MAX);
279	if (!prop)
280		return -ENOMEM;
281	dev->mode_config.prop_crtc_h = prop;
282
283	prop = drm_property_create_object(dev, DRM_MODE_PROP_ATOMIC,
284			"FB_ID", DRM_MODE_OBJECT_FB);
285	if (!prop)
286		return -ENOMEM;
287	dev->mode_config.prop_fb_id = prop;
288
289	prop = drm_property_create_signed_range(dev, DRM_MODE_PROP_ATOMIC,
290			"IN_FENCE_FD", -1, INT_MAX);
291	if (!prop)
292		return -ENOMEM;
293	dev->mode_config.prop_in_fence_fd = prop;
294
295	prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
296			"OUT_FENCE_PTR", 0, U64_MAX);
297	if (!prop)
298		return -ENOMEM;
299	dev->mode_config.prop_out_fence_ptr = prop;
300
301	prop = drm_property_create_object(dev, DRM_MODE_PROP_ATOMIC,
302			"CRTC_ID", DRM_MODE_OBJECT_CRTC);
303	if (!prop)
304		return -ENOMEM;
305	dev->mode_config.prop_crtc_id = prop;
306
307	prop = drm_property_create(dev,
308			DRM_MODE_PROP_ATOMIC | DRM_MODE_PROP_BLOB,
309			"FB_DAMAGE_CLIPS", 0);
310	if (!prop)
311		return -ENOMEM;
312	dev->mode_config.prop_fb_damage_clips = prop;
313
314	prop = drm_property_create_bool(dev, DRM_MODE_PROP_ATOMIC,
315			"ACTIVE");
316	if (!prop)
317		return -ENOMEM;
318	dev->mode_config.prop_active = prop;
319
320	prop = drm_property_create(dev,
321			DRM_MODE_PROP_ATOMIC | DRM_MODE_PROP_BLOB,
322			"MODE_ID", 0);
323	if (!prop)
324		return -ENOMEM;
325	dev->mode_config.prop_mode_id = prop;
326
327	prop = drm_property_create_bool(dev, 0,
328			"VRR_ENABLED");
329	if (!prop)
330		return -ENOMEM;
331	dev->mode_config.prop_vrr_enabled = prop;
332
333	prop = drm_property_create(dev,
334			DRM_MODE_PROP_BLOB,
335			"DEGAMMA_LUT", 0);
336	if (!prop)
337		return -ENOMEM;
338	dev->mode_config.degamma_lut_property = prop;
339
340	prop = drm_property_create_range(dev,
341			DRM_MODE_PROP_IMMUTABLE,
342			"DEGAMMA_LUT_SIZE", 0, UINT_MAX);
343	if (!prop)
344		return -ENOMEM;
345	dev->mode_config.degamma_lut_size_property = prop;
346
347	prop = drm_property_create(dev,
348			DRM_MODE_PROP_BLOB,
349			"CTM", 0);
350	if (!prop)
351		return -ENOMEM;
352	dev->mode_config.ctm_property = prop;
353
354	prop = drm_property_create(dev,
355			DRM_MODE_PROP_BLOB,
356			"GAMMA_LUT", 0);
357	if (!prop)
358		return -ENOMEM;
359	dev->mode_config.gamma_lut_property = prop;
360
361	prop = drm_property_create_range(dev,
362			DRM_MODE_PROP_IMMUTABLE,
363			"GAMMA_LUT_SIZE", 0, UINT_MAX);
364	if (!prop)
365		return -ENOMEM;
366	dev->mode_config.gamma_lut_size_property = prop;
367
368	prop = drm_property_create(dev,
369				   DRM_MODE_PROP_IMMUTABLE | DRM_MODE_PROP_BLOB,
370				   "IN_FORMATS", 0);
371	if (!prop)
372		return -ENOMEM;
373	dev->mode_config.modifiers_property = prop;
374
375	prop = drm_property_create(dev,
376				   DRM_MODE_PROP_IMMUTABLE | DRM_MODE_PROP_BLOB,
377				   "SIZE_HINTS", 0);
378	if (!prop)
379		return -ENOMEM;
380	dev->mode_config.size_hints_property = prop;
381
382	return 0;
383}
384
385static void drm_mode_config_init_release(struct drm_device *dev, void *ptr)
386{
387	drm_mode_config_cleanup(dev);
388}
389
390/**
391 * drmm_mode_config_init - managed DRM mode_configuration structure
392 * 	initialization
393 * @dev: DRM device
394 *
395 * Initialize @dev's mode_config structure, used for tracking the graphics
396 * configuration of @dev.
397 *
398 * Since this initializes the modeset locks, no locking is possible. Which is no
399 * problem, since this should happen single threaded at init time. It is the
400 * driver's problem to ensure this guarantee.
401 *
402 * Cleanup is automatically handled through registering drm_mode_config_cleanup
403 * with drmm_add_action().
404 *
405 * Returns: 0 on success, negative error value on failure.
406 */
407int drmm_mode_config_init(struct drm_device *dev)
408{
409	int ret;
410
411	mutex_init(&dev->mode_config.mutex);
412	drm_modeset_lock_init(&dev->mode_config.connection_mutex);
413	mutex_init(&dev->mode_config.idr_mutex);
414	mutex_init(&dev->mode_config.fb_lock);
415	mutex_init(&dev->mode_config.blob_lock);
416	INIT_LIST_HEAD(&dev->mode_config.fb_list);
417	INIT_LIST_HEAD(&dev->mode_config.crtc_list);
418	INIT_LIST_HEAD(&dev->mode_config.connector_list);
419	INIT_LIST_HEAD(&dev->mode_config.encoder_list);
420	INIT_LIST_HEAD(&dev->mode_config.property_list);
421	INIT_LIST_HEAD(&dev->mode_config.property_blob_list);
422	INIT_LIST_HEAD(&dev->mode_config.plane_list);
423	INIT_LIST_HEAD(&dev->mode_config.privobj_list);
424	idr_init_base(&dev->mode_config.object_idr, 1);
425	idr_init_base(&dev->mode_config.tile_idr, 1);
426	ida_init(&dev->mode_config.connector_ida);
427	spin_lock_init(&dev->mode_config.connector_list_lock);
428
429	init_llist_head(&dev->mode_config.connector_free_list);
430	INIT_WORK(&dev->mode_config.connector_free_work, drm_connector_free_work_fn);
431
432	ret = drm_mode_create_standard_properties(dev);
433	if (ret) {
434		drm_mode_config_cleanup(dev);
435		return ret;
436	}
437
438	/* Just to be sure */
439	dev->mode_config.num_fb = 0;
440	dev->mode_config.num_connector = 0;
441	dev->mode_config.num_crtc = 0;
442	dev->mode_config.num_encoder = 0;
443	dev->mode_config.num_total_plane = 0;
444
445	if (IS_ENABLED(CONFIG_LOCKDEP)) {
446		struct drm_modeset_acquire_ctx modeset_ctx;
447		struct ww_acquire_ctx resv_ctx;
448		struct dma_resv resv;
449		int ret;
450
451		dma_resv_init(&resv);
452
453		drm_modeset_acquire_init(&modeset_ctx, 0);
454		ret = drm_modeset_lock(&dev->mode_config.connection_mutex,
455				       &modeset_ctx);
456		if (ret == -EDEADLK)
457			ret = drm_modeset_backoff(&modeset_ctx);
458
459		might_fault();
460
461		ww_acquire_init(&resv_ctx, &reservation_ww_class);
462		ret = dma_resv_lock(&resv, &resv_ctx);
463		if (ret == -EDEADLK)
464			dma_resv_lock_slow(&resv, &resv_ctx);
465
466		dma_resv_unlock(&resv);
467		ww_acquire_fini(&resv_ctx);
468
469		drm_modeset_drop_locks(&modeset_ctx);
470		drm_modeset_acquire_fini(&modeset_ctx);
471		dma_resv_fini(&resv);
472	}
473
474	return drmm_add_action_or_reset(dev, drm_mode_config_init_release,
475					NULL);
476}
477EXPORT_SYMBOL(drmm_mode_config_init);
478
479/**
480 * drm_mode_config_cleanup - free up DRM mode_config info
481 * @dev: DRM device
482 *
483 * Free up all the connectors and CRTCs associated with this DRM device, then
484 * free up the framebuffers and associated buffer objects.
485 *
486 * Note that since this /should/ happen single-threaded at driver/device
487 * teardown time, no locking is required. It's the driver's job to ensure that
488 * this guarantee actually holds true.
489 *
490 * FIXME: With the managed drmm_mode_config_init() it is no longer necessary for
491 * drivers to explicitly call this function.
492 */
493void drm_mode_config_cleanup(struct drm_device *dev)
494{
495	struct drm_connector *connector;
496	struct drm_connector_list_iter conn_iter;
497	struct drm_crtc *crtc, *ct;
498	struct drm_encoder *encoder, *enct;
499	struct drm_framebuffer *fb, *fbt;
500	struct drm_property *property, *pt;
501	struct drm_property_blob *blob, *bt;
502	struct drm_plane *plane, *plt;
503
504	list_for_each_entry_safe(encoder, enct, &dev->mode_config.encoder_list,
505				 head) {
506		encoder->funcs->destroy(encoder);
507	}
508
509	drm_connector_list_iter_begin(dev, &conn_iter);
510	drm_for_each_connector_iter(connector, &conn_iter) {
511		/* drm_connector_list_iter holds an full reference to the
512		 * current connector itself, which means it is inherently safe
513		 * against unreferencing the current connector - but not against
514		 * deleting it right away. */
515		drm_connector_put(connector);
516	}
517	drm_connector_list_iter_end(&conn_iter);
518	/* connector_iter drops references in a work item. */
519	flush_work(&dev->mode_config.connector_free_work);
520	if (WARN_ON(!list_empty(&dev->mode_config.connector_list))) {
521		drm_connector_list_iter_begin(dev, &conn_iter);
522		drm_for_each_connector_iter(connector, &conn_iter)
523			DRM_ERROR("connector %s leaked!\n", connector->name);
524		drm_connector_list_iter_end(&conn_iter);
525	}
526
527	list_for_each_entry_safe(property, pt, &dev->mode_config.property_list,
528				 head) {
529		drm_property_destroy(dev, property);
530	}
531
532	list_for_each_entry_safe(plane, plt, &dev->mode_config.plane_list,
533				 head) {
534		plane->funcs->destroy(plane);
535	}
536
537	list_for_each_entry_safe(crtc, ct, &dev->mode_config.crtc_list, head) {
538		crtc->funcs->destroy(crtc);
539	}
540
541	list_for_each_entry_safe(blob, bt, &dev->mode_config.property_blob_list,
542				 head_global) {
543		drm_property_blob_put(blob);
544	}
545
546	/*
547	 * Single-threaded teardown context, so it's not required to grab the
548	 * fb_lock to protect against concurrent fb_list access. Contrary, it
549	 * would actually deadlock with the drm_framebuffer_cleanup function.
550	 *
551	 * Also, if there are any framebuffers left, that's a driver leak now,
552	 * so politely WARN about this.
553	 */
554	WARN_ON(!list_empty(&dev->mode_config.fb_list));
555	list_for_each_entry_safe(fb, fbt, &dev->mode_config.fb_list, head) {
556		struct drm_printer p = drm_dbg_printer(dev, DRM_UT_KMS, "[leaked fb]");
557
558		drm_printf(&p, "framebuffer[%u]:\n", fb->base.id);
559		drm_framebuffer_print_info(&p, 1, fb);
560		drm_framebuffer_free(&fb->base.refcount);
561	}
562
563	ida_destroy(&dev->mode_config.connector_ida);
564	idr_destroy(&dev->mode_config.tile_idr);
565	idr_destroy(&dev->mode_config.object_idr);
566	drm_modeset_lock_fini(&dev->mode_config.connection_mutex);
567}
568EXPORT_SYMBOL(drm_mode_config_cleanup);
569
570static u32 full_encoder_mask(struct drm_device *dev)
571{
572	struct drm_encoder *encoder;
573	u32 encoder_mask = 0;
574
575	drm_for_each_encoder(encoder, dev)
576		encoder_mask |= drm_encoder_mask(encoder);
577
578	return encoder_mask;
579}
580
581/*
582 * For some reason we want the encoder itself included in
583 * possible_clones. Make life easy for drivers by allowing them
584 * to leave possible_clones unset if no cloning is possible.
585 */
586static void fixup_encoder_possible_clones(struct drm_encoder *encoder)
587{
588	if (encoder->possible_clones == 0)
589		encoder->possible_clones = drm_encoder_mask(encoder);
590}
591
592static void validate_encoder_possible_clones(struct drm_encoder *encoder)
593{
594	struct drm_device *dev = encoder->dev;
595	u32 encoder_mask = full_encoder_mask(dev);
596	struct drm_encoder *other;
597
598	drm_for_each_encoder(other, dev) {
599		WARN(!!(encoder->possible_clones & drm_encoder_mask(other)) !=
600		     !!(other->possible_clones & drm_encoder_mask(encoder)),
601		     "possible_clones mismatch: "
602		     "[ENCODER:%d:%s] mask=0x%x possible_clones=0x%x vs. "
603		     "[ENCODER:%d:%s] mask=0x%x possible_clones=0x%x\n",
604		     encoder->base.id, encoder->name,
605		     drm_encoder_mask(encoder), encoder->possible_clones,
606		     other->base.id, other->name,
607		     drm_encoder_mask(other), other->possible_clones);
608	}
609
610	WARN((encoder->possible_clones & drm_encoder_mask(encoder)) == 0 ||
611	     (encoder->possible_clones & ~encoder_mask) != 0,
612	     "Bogus possible_clones: "
613	     "[ENCODER:%d:%s] possible_clones=0x%x (full encoder mask=0x%x)\n",
614	     encoder->base.id, encoder->name,
615	     encoder->possible_clones, encoder_mask);
616}
617
618static u32 full_crtc_mask(struct drm_device *dev)
619{
620	struct drm_crtc *crtc;
621	u32 crtc_mask = 0;
622
623	drm_for_each_crtc(crtc, dev)
624		crtc_mask |= drm_crtc_mask(crtc);
625
626	return crtc_mask;
627}
628
629static void validate_encoder_possible_crtcs(struct drm_encoder *encoder)
630{
631	u32 crtc_mask = full_crtc_mask(encoder->dev);
632
633	WARN((encoder->possible_crtcs & crtc_mask) == 0 ||
634	     (encoder->possible_crtcs & ~crtc_mask) != 0,
635	     "Bogus possible_crtcs: "
636	     "[ENCODER:%d:%s] possible_crtcs=0x%x (full crtc mask=0x%x)\n",
637	     encoder->base.id, encoder->name,
638	     encoder->possible_crtcs, crtc_mask);
639}
640
641void drm_mode_config_validate(struct drm_device *dev)
642{
643	struct drm_encoder *encoder;
644	struct drm_crtc *crtc;
645	struct drm_plane *plane;
646	u32 primary_with_crtc = 0, cursor_with_crtc = 0;
647	unsigned int num_primary = 0;
648
649	if (!drm_core_check_feature(dev, DRIVER_MODESET))
650		return;
651
652	drm_for_each_encoder(encoder, dev)
653		fixup_encoder_possible_clones(encoder);
654
655	drm_for_each_encoder(encoder, dev) {
656		validate_encoder_possible_clones(encoder);
657		validate_encoder_possible_crtcs(encoder);
658	}
659
660	drm_for_each_crtc(crtc, dev) {
661		WARN(!crtc->primary, "Missing primary plane on [CRTC:%d:%s]\n",
662		     crtc->base.id, crtc->name);
663
664		WARN(crtc->cursor && crtc->funcs->cursor_set,
665		     "[CRTC:%d:%s] must not have both a cursor plane and a cursor_set func",
666		     crtc->base.id, crtc->name);
667		WARN(crtc->cursor && crtc->funcs->cursor_set2,
668		     "[CRTC:%d:%s] must not have both a cursor plane and a cursor_set2 func",
669		     crtc->base.id, crtc->name);
670		WARN(crtc->cursor && crtc->funcs->cursor_move,
671		     "[CRTC:%d:%s] must not have both a cursor plane and a cursor_move func",
672		     crtc->base.id, crtc->name);
673
674		if (crtc->primary) {
675			WARN(!(crtc->primary->possible_crtcs & drm_crtc_mask(crtc)),
676			     "Bogus primary plane possible_crtcs: [PLANE:%d:%s] must be compatible with [CRTC:%d:%s]\n",
677			     crtc->primary->base.id, crtc->primary->name,
678			     crtc->base.id, crtc->name);
679			WARN(primary_with_crtc & drm_plane_mask(crtc->primary),
680			     "Primary plane [PLANE:%d:%s] used for multiple CRTCs",
681			     crtc->primary->base.id, crtc->primary->name);
682			primary_with_crtc |= drm_plane_mask(crtc->primary);
683		}
684		if (crtc->cursor) {
685			WARN(!(crtc->cursor->possible_crtcs & drm_crtc_mask(crtc)),
686			     "Bogus cursor plane possible_crtcs: [PLANE:%d:%s] must be compatible with [CRTC:%d:%s]\n",
687			     crtc->cursor->base.id, crtc->cursor->name,
688			     crtc->base.id, crtc->name);
689			WARN(cursor_with_crtc & drm_plane_mask(crtc->cursor),
690			     "Cursor plane [PLANE:%d:%s] used for multiple CRTCs",
691			     crtc->cursor->base.id, crtc->cursor->name);
692			cursor_with_crtc |= drm_plane_mask(crtc->cursor);
693		}
694	}
695
696	drm_for_each_plane(plane, dev) {
697		if (plane->type == DRM_PLANE_TYPE_PRIMARY)
698			num_primary++;
699	}
700
701	WARN(num_primary != dev->mode_config.num_crtc,
702	     "Must have as many primary planes as there are CRTCs, but have %u primary planes and %u CRTCs",
703	     num_primary, dev->mode_config.num_crtc);
704}
v4.17
  1/*
  2 * Copyright (c) 2016 Intel Corporation
  3 *
  4 * Permission to use, copy, modify, distribute, and sell this software and its
  5 * documentation for any purpose is hereby granted without fee, provided that
  6 * the above copyright notice appear in all copies and that both that copyright
  7 * notice and this permission notice appear in supporting documentation, and
  8 * that the name of the copyright holders not be used in advertising or
  9 * publicity pertaining to distribution of the software without specific,
 10 * written prior permission.  The copyright holders make no representations
 11 * about the suitability of this software for any purpose.  It is provided "as
 12 * is" without express or implied warranty.
 13 *
 14 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
 15 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
 16 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
 17 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
 18 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
 19 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
 20 * OF THIS SOFTWARE.
 21 */
 22
 
 
 
 23#include <drm/drm_encoder.h>
 
 
 
 24#include <drm/drm_mode_config.h>
 25#include <drm/drmP.h>
 
 26
 27#include "drm_crtc_internal.h"
 28#include "drm_internal.h"
 29
 30int drm_modeset_register_all(struct drm_device *dev)
 31{
 32	int ret;
 33
 34	ret = drm_plane_register_all(dev);
 35	if (ret)
 36		goto err_plane;
 37
 38	ret = drm_crtc_register_all(dev);
 39	if  (ret)
 40		goto err_crtc;
 41
 42	ret = drm_encoder_register_all(dev);
 43	if (ret)
 44		goto err_encoder;
 45
 46	ret = drm_connector_register_all(dev);
 47	if (ret)
 48		goto err_connector;
 49
 50	return 0;
 51
 52err_connector:
 53	drm_encoder_unregister_all(dev);
 54err_encoder:
 55	drm_crtc_unregister_all(dev);
 56err_crtc:
 57	drm_plane_unregister_all(dev);
 58err_plane:
 59	return ret;
 60}
 61
 62void drm_modeset_unregister_all(struct drm_device *dev)
 63{
 64	drm_connector_unregister_all(dev);
 65	drm_encoder_unregister_all(dev);
 66	drm_crtc_unregister_all(dev);
 67	drm_plane_unregister_all(dev);
 68}
 69
 70/**
 71 * drm_mode_getresources - get graphics configuration
 72 * @dev: drm device for the ioctl
 73 * @data: data pointer for the ioctl
 74 * @file_priv: drm file for the ioctl call
 75 *
 76 * Construct a set of configuration description structures and return
 77 * them to the user, including CRTC, connector and framebuffer configuration.
 78 *
 79 * Called by the user via ioctl.
 80 *
 81 * Returns:
 82 * Zero on success, negative errno on failure.
 83 */
 84int drm_mode_getresources(struct drm_device *dev, void *data,
 85			  struct drm_file *file_priv)
 86{
 87	struct drm_mode_card_res *card_res = data;
 88	struct drm_framebuffer *fb;
 89	struct drm_connector *connector;
 90	struct drm_crtc *crtc;
 91	struct drm_encoder *encoder;
 92	int count, ret = 0;
 93	uint32_t __user *fb_id;
 94	uint32_t __user *crtc_id;
 95	uint32_t __user *connector_id;
 96	uint32_t __user *encoder_id;
 97	struct drm_connector_list_iter conn_iter;
 98
 99	if (!drm_core_check_feature(dev, DRIVER_MODESET))
100		return -EINVAL;
101
102
103	mutex_lock(&file_priv->fbs_lock);
104	count = 0;
105	fb_id = u64_to_user_ptr(card_res->fb_id_ptr);
106	list_for_each_entry(fb, &file_priv->fbs, filp_head) {
107		if (count < card_res->count_fbs &&
108		    put_user(fb->base.id, fb_id + count)) {
109			mutex_unlock(&file_priv->fbs_lock);
110			return -EFAULT;
111		}
112		count++;
113	}
114	card_res->count_fbs = count;
115	mutex_unlock(&file_priv->fbs_lock);
116
117	card_res->max_height = dev->mode_config.max_height;
118	card_res->min_height = dev->mode_config.min_height;
119	card_res->max_width = dev->mode_config.max_width;
120	card_res->min_width = dev->mode_config.min_width;
121
122	count = 0;
123	crtc_id = u64_to_user_ptr(card_res->crtc_id_ptr);
124	drm_for_each_crtc(crtc, dev) {
125		if (drm_lease_held(file_priv, crtc->base.id)) {
126			if (count < card_res->count_crtcs &&
127			    put_user(crtc->base.id, crtc_id + count))
128				return -EFAULT;
129			count++;
130		}
131	}
132	card_res->count_crtcs = count;
133
134	count = 0;
135	encoder_id = u64_to_user_ptr(card_res->encoder_id_ptr);
136	drm_for_each_encoder(encoder, dev) {
137		if (count < card_res->count_encoders &&
138		    put_user(encoder->base.id, encoder_id + count))
139			return -EFAULT;
140		count++;
141	}
142	card_res->count_encoders = count;
143
144	drm_connector_list_iter_begin(dev, &conn_iter);
145	count = 0;
146	connector_id = u64_to_user_ptr(card_res->connector_id_ptr);
147	drm_for_each_connector_iter(connector, &conn_iter) {
 
 
 
 
 
148		if (drm_lease_held(file_priv, connector->base.id)) {
149			if (count < card_res->count_connectors &&
150			    put_user(connector->base.id, connector_id + count)) {
151				drm_connector_list_iter_end(&conn_iter);
152				return -EFAULT;
153			}
154			count++;
155		}
156	}
157	card_res->count_connectors = count;
158	drm_connector_list_iter_end(&conn_iter);
159
160	return ret;
161}
162
163/**
164 * drm_mode_config_reset - call ->reset callbacks
165 * @dev: drm device
166 *
167 * This functions calls all the crtc's, encoder's and connector's ->reset
168 * callback. Drivers can use this in e.g. their driver load or resume code to
169 * reset hardware and software state.
170 */
171void drm_mode_config_reset(struct drm_device *dev)
172{
173	struct drm_crtc *crtc;
174	struct drm_plane *plane;
175	struct drm_encoder *encoder;
176	struct drm_connector *connector;
177	struct drm_connector_list_iter conn_iter;
178
179	drm_for_each_plane(plane, dev)
180		if (plane->funcs->reset)
181			plane->funcs->reset(plane);
182
183	drm_for_each_crtc(crtc, dev)
184		if (crtc->funcs->reset)
185			crtc->funcs->reset(crtc);
186
187	drm_for_each_encoder(encoder, dev)
188		if (encoder->funcs->reset)
189			encoder->funcs->reset(encoder);
190
191	drm_connector_list_iter_begin(dev, &conn_iter);
192	drm_for_each_connector_iter(connector, &conn_iter)
193		if (connector->funcs->reset)
194			connector->funcs->reset(connector);
195	drm_connector_list_iter_end(&conn_iter);
196}
197EXPORT_SYMBOL(drm_mode_config_reset);
198
199/*
200 * Global properties
201 */
202static const struct drm_prop_enum_list drm_plane_type_enum_list[] = {
203	{ DRM_PLANE_TYPE_OVERLAY, "Overlay" },
204	{ DRM_PLANE_TYPE_PRIMARY, "Primary" },
205	{ DRM_PLANE_TYPE_CURSOR, "Cursor" },
206};
207
208static int drm_mode_create_standard_properties(struct drm_device *dev)
209{
210	struct drm_property *prop;
211	int ret;
212
213	ret = drm_connector_create_standard_properties(dev);
214	if (ret)
215		return ret;
216
217	prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
218					"type", drm_plane_type_enum_list,
219					ARRAY_SIZE(drm_plane_type_enum_list));
220	if (!prop)
221		return -ENOMEM;
222	dev->mode_config.plane_type_property = prop;
223
224	prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
225			"SRC_X", 0, UINT_MAX);
226	if (!prop)
227		return -ENOMEM;
228	dev->mode_config.prop_src_x = prop;
229
230	prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
231			"SRC_Y", 0, UINT_MAX);
232	if (!prop)
233		return -ENOMEM;
234	dev->mode_config.prop_src_y = prop;
235
236	prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
237			"SRC_W", 0, UINT_MAX);
238	if (!prop)
239		return -ENOMEM;
240	dev->mode_config.prop_src_w = prop;
241
242	prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
243			"SRC_H", 0, UINT_MAX);
244	if (!prop)
245		return -ENOMEM;
246	dev->mode_config.prop_src_h = prop;
247
248	prop = drm_property_create_signed_range(dev, DRM_MODE_PROP_ATOMIC,
249			"CRTC_X", INT_MIN, INT_MAX);
250	if (!prop)
251		return -ENOMEM;
252	dev->mode_config.prop_crtc_x = prop;
253
254	prop = drm_property_create_signed_range(dev, DRM_MODE_PROP_ATOMIC,
255			"CRTC_Y", INT_MIN, INT_MAX);
256	if (!prop)
257		return -ENOMEM;
258	dev->mode_config.prop_crtc_y = prop;
259
260	prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
261			"CRTC_W", 0, INT_MAX);
262	if (!prop)
263		return -ENOMEM;
264	dev->mode_config.prop_crtc_w = prop;
265
266	prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
267			"CRTC_H", 0, INT_MAX);
268	if (!prop)
269		return -ENOMEM;
270	dev->mode_config.prop_crtc_h = prop;
271
272	prop = drm_property_create_object(dev, DRM_MODE_PROP_ATOMIC,
273			"FB_ID", DRM_MODE_OBJECT_FB);
274	if (!prop)
275		return -ENOMEM;
276	dev->mode_config.prop_fb_id = prop;
277
278	prop = drm_property_create_signed_range(dev, DRM_MODE_PROP_ATOMIC,
279			"IN_FENCE_FD", -1, INT_MAX);
280	if (!prop)
281		return -ENOMEM;
282	dev->mode_config.prop_in_fence_fd = prop;
283
284	prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
285			"OUT_FENCE_PTR", 0, U64_MAX);
286	if (!prop)
287		return -ENOMEM;
288	dev->mode_config.prop_out_fence_ptr = prop;
289
290	prop = drm_property_create_object(dev, DRM_MODE_PROP_ATOMIC,
291			"CRTC_ID", DRM_MODE_OBJECT_CRTC);
292	if (!prop)
293		return -ENOMEM;
294	dev->mode_config.prop_crtc_id = prop;
295
 
 
 
 
 
 
 
296	prop = drm_property_create_bool(dev, DRM_MODE_PROP_ATOMIC,
297			"ACTIVE");
298	if (!prop)
299		return -ENOMEM;
300	dev->mode_config.prop_active = prop;
301
302	prop = drm_property_create(dev,
303			DRM_MODE_PROP_ATOMIC | DRM_MODE_PROP_BLOB,
304			"MODE_ID", 0);
305	if (!prop)
306		return -ENOMEM;
307	dev->mode_config.prop_mode_id = prop;
308
 
 
 
 
 
 
309	prop = drm_property_create(dev,
310			DRM_MODE_PROP_BLOB,
311			"DEGAMMA_LUT", 0);
312	if (!prop)
313		return -ENOMEM;
314	dev->mode_config.degamma_lut_property = prop;
315
316	prop = drm_property_create_range(dev,
317			DRM_MODE_PROP_IMMUTABLE,
318			"DEGAMMA_LUT_SIZE", 0, UINT_MAX);
319	if (!prop)
320		return -ENOMEM;
321	dev->mode_config.degamma_lut_size_property = prop;
322
323	prop = drm_property_create(dev,
324			DRM_MODE_PROP_BLOB,
325			"CTM", 0);
326	if (!prop)
327		return -ENOMEM;
328	dev->mode_config.ctm_property = prop;
329
330	prop = drm_property_create(dev,
331			DRM_MODE_PROP_BLOB,
332			"GAMMA_LUT", 0);
333	if (!prop)
334		return -ENOMEM;
335	dev->mode_config.gamma_lut_property = prop;
336
337	prop = drm_property_create_range(dev,
338			DRM_MODE_PROP_IMMUTABLE,
339			"GAMMA_LUT_SIZE", 0, UINT_MAX);
340	if (!prop)
341		return -ENOMEM;
342	dev->mode_config.gamma_lut_size_property = prop;
343
344	prop = drm_property_create(dev,
345				   DRM_MODE_PROP_IMMUTABLE | DRM_MODE_PROP_BLOB,
346				   "IN_FORMATS", 0);
347	if (!prop)
348		return -ENOMEM;
349	dev->mode_config.modifiers_property = prop;
350
 
 
 
 
 
 
 
351	return 0;
352}
353
 
 
 
 
 
354/**
355 * drm_mode_config_init - initialize DRM mode_configuration structure
 
356 * @dev: DRM device
357 *
358 * Initialize @dev's mode_config structure, used for tracking the graphics
359 * configuration of @dev.
360 *
361 * Since this initializes the modeset locks, no locking is possible. Which is no
362 * problem, since this should happen single threaded at init time. It is the
363 * driver's problem to ensure this guarantee.
364 *
 
 
 
 
365 */
366void drm_mode_config_init(struct drm_device *dev)
367{
 
 
368	mutex_init(&dev->mode_config.mutex);
369	drm_modeset_lock_init(&dev->mode_config.connection_mutex);
370	mutex_init(&dev->mode_config.idr_mutex);
371	mutex_init(&dev->mode_config.fb_lock);
372	mutex_init(&dev->mode_config.blob_lock);
373	INIT_LIST_HEAD(&dev->mode_config.fb_list);
374	INIT_LIST_HEAD(&dev->mode_config.crtc_list);
375	INIT_LIST_HEAD(&dev->mode_config.connector_list);
376	INIT_LIST_HEAD(&dev->mode_config.encoder_list);
377	INIT_LIST_HEAD(&dev->mode_config.property_list);
378	INIT_LIST_HEAD(&dev->mode_config.property_blob_list);
379	INIT_LIST_HEAD(&dev->mode_config.plane_list);
380	idr_init(&dev->mode_config.crtc_idr);
381	idr_init(&dev->mode_config.tile_idr);
 
382	ida_init(&dev->mode_config.connector_ida);
383	spin_lock_init(&dev->mode_config.connector_list_lock);
384
385	init_llist_head(&dev->mode_config.connector_free_list);
386	INIT_WORK(&dev->mode_config.connector_free_work, drm_connector_free_work_fn);
387
388	drm_mode_create_standard_properties(dev);
 
 
 
 
389
390	/* Just to be sure */
391	dev->mode_config.num_fb = 0;
392	dev->mode_config.num_connector = 0;
393	dev->mode_config.num_crtc = 0;
394	dev->mode_config.num_encoder = 0;
395	dev->mode_config.num_total_plane = 0;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
396}
397EXPORT_SYMBOL(drm_mode_config_init);
398
399/**
400 * drm_mode_config_cleanup - free up DRM mode_config info
401 * @dev: DRM device
402 *
403 * Free up all the connectors and CRTCs associated with this DRM device, then
404 * free up the framebuffers and associated buffer objects.
405 *
406 * Note that since this /should/ happen single-threaded at driver/device
407 * teardown time, no locking is required. It's the driver's job to ensure that
408 * this guarantee actually holds true.
409 *
410 * FIXME: cleanup any dangling user buffer objects too
 
411 */
412void drm_mode_config_cleanup(struct drm_device *dev)
413{
414	struct drm_connector *connector;
415	struct drm_connector_list_iter conn_iter;
416	struct drm_crtc *crtc, *ct;
417	struct drm_encoder *encoder, *enct;
418	struct drm_framebuffer *fb, *fbt;
419	struct drm_property *property, *pt;
420	struct drm_property_blob *blob, *bt;
421	struct drm_plane *plane, *plt;
422
423	list_for_each_entry_safe(encoder, enct, &dev->mode_config.encoder_list,
424				 head) {
425		encoder->funcs->destroy(encoder);
426	}
427
428	drm_connector_list_iter_begin(dev, &conn_iter);
429	drm_for_each_connector_iter(connector, &conn_iter) {
430		/* drm_connector_list_iter holds an full reference to the
431		 * current connector itself, which means it is inherently safe
432		 * against unreferencing the current connector - but not against
433		 * deleting it right away. */
434		drm_connector_put(connector);
435	}
436	drm_connector_list_iter_end(&conn_iter);
437	/* connector_iter drops references in a work item. */
438	flush_work(&dev->mode_config.connector_free_work);
439	if (WARN_ON(!list_empty(&dev->mode_config.connector_list))) {
440		drm_connector_list_iter_begin(dev, &conn_iter);
441		drm_for_each_connector_iter(connector, &conn_iter)
442			DRM_ERROR("connector %s leaked!\n", connector->name);
443		drm_connector_list_iter_end(&conn_iter);
444	}
445
446	list_for_each_entry_safe(property, pt, &dev->mode_config.property_list,
447				 head) {
448		drm_property_destroy(dev, property);
449	}
450
451	list_for_each_entry_safe(plane, plt, &dev->mode_config.plane_list,
452				 head) {
453		plane->funcs->destroy(plane);
454	}
455
456	list_for_each_entry_safe(crtc, ct, &dev->mode_config.crtc_list, head) {
457		crtc->funcs->destroy(crtc);
458	}
459
460	list_for_each_entry_safe(blob, bt, &dev->mode_config.property_blob_list,
461				 head_global) {
462		drm_property_blob_put(blob);
463	}
464
465	/*
466	 * Single-threaded teardown context, so it's not required to grab the
467	 * fb_lock to protect against concurrent fb_list access. Contrary, it
468	 * would actually deadlock with the drm_framebuffer_cleanup function.
469	 *
470	 * Also, if there are any framebuffers left, that's a driver leak now,
471	 * so politely WARN about this.
472	 */
473	WARN_ON(!list_empty(&dev->mode_config.fb_list));
474	list_for_each_entry_safe(fb, fbt, &dev->mode_config.fb_list, head) {
475		struct drm_printer p = drm_debug_printer("[leaked fb]");
 
476		drm_printf(&p, "framebuffer[%u]:\n", fb->base.id);
477		drm_framebuffer_print_info(&p, 1, fb);
478		drm_framebuffer_free(&fb->base.refcount);
479	}
480
481	ida_destroy(&dev->mode_config.connector_ida);
482	idr_destroy(&dev->mode_config.tile_idr);
483	idr_destroy(&dev->mode_config.crtc_idr);
484	drm_modeset_lock_fini(&dev->mode_config.connection_mutex);
485}
486EXPORT_SYMBOL(drm_mode_config_cleanup);