Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Atheros Communication Bluetooth HCIATH3K UART protocol
4 *
5 * HCIATH3K (HCI Atheros AR300x Protocol) is a Atheros Communication's
6 * power management protocol extension to H4 to support AR300x Bluetooth Chip.
7 *
8 * Copyright (c) 2009-2010 Atheros Communications Inc.
9 *
10 * Acknowledgements:
11 * This file is based on hci_h4.c, which was written
12 * by Maxim Krasnyansky and Marcel Holtmann.
13 */
14
15#include <linux/module.h>
16#include <linux/kernel.h>
17
18#include <linux/init.h>
19#include <linux/slab.h>
20#include <linux/tty.h>
21#include <linux/errno.h>
22#include <linux/ioctl.h>
23#include <linux/skbuff.h>
24
25#include <net/bluetooth/bluetooth.h>
26#include <net/bluetooth/hci_core.h>
27
28#include "hci_uart.h"
29
30struct ath_struct {
31 struct hci_uart *hu;
32 unsigned int cur_sleep;
33
34 struct sk_buff *rx_skb;
35 struct sk_buff_head txq;
36 struct work_struct ctxtsw;
37};
38
39#define OP_WRITE_TAG 0x01
40
41#define INDEX_BDADDR 0x01
42
43struct ath_vendor_cmd {
44 __u8 opcode;
45 __le16 index;
46 __u8 len;
47 __u8 data[251];
48} __packed;
49
50static int ath_wakeup_ar3k(struct tty_struct *tty)
51{
52 int status = tty->driver->ops->tiocmget(tty);
53
54 if (status & TIOCM_CTS)
55 return status;
56
57 /* Clear RTS first */
58 tty->driver->ops->tiocmget(tty);
59 tty->driver->ops->tiocmset(tty, 0x00, TIOCM_RTS);
60 msleep(20);
61
62 /* Set RTS, wake up board */
63 tty->driver->ops->tiocmget(tty);
64 tty->driver->ops->tiocmset(tty, TIOCM_RTS, 0x00);
65 msleep(20);
66
67 status = tty->driver->ops->tiocmget(tty);
68 return status;
69}
70
71static void ath_hci_uart_work(struct work_struct *work)
72{
73 int status;
74 struct ath_struct *ath;
75 struct hci_uart *hu;
76 struct tty_struct *tty;
77
78 ath = container_of(work, struct ath_struct, ctxtsw);
79
80 hu = ath->hu;
81 tty = hu->tty;
82
83 /* verify and wake up controller */
84 if (ath->cur_sleep) {
85 status = ath_wakeup_ar3k(tty);
86 if (!(status & TIOCM_CTS))
87 return;
88 }
89
90 /* Ready to send Data */
91 clear_bit(HCI_UART_SENDING, &hu->tx_state);
92 hci_uart_tx_wakeup(hu);
93}
94
95static int ath_open(struct hci_uart *hu)
96{
97 struct ath_struct *ath;
98
99 BT_DBG("hu %p", hu);
100
101 if (!hci_uart_has_flow_control(hu))
102 return -EOPNOTSUPP;
103
104 ath = kzalloc(sizeof(*ath), GFP_KERNEL);
105 if (!ath)
106 return -ENOMEM;
107
108 skb_queue_head_init(&ath->txq);
109
110 hu->priv = ath;
111 ath->hu = hu;
112
113 INIT_WORK(&ath->ctxtsw, ath_hci_uart_work);
114
115 return 0;
116}
117
118static int ath_close(struct hci_uart *hu)
119{
120 struct ath_struct *ath = hu->priv;
121
122 BT_DBG("hu %p", hu);
123
124 skb_queue_purge(&ath->txq);
125
126 kfree_skb(ath->rx_skb);
127
128 cancel_work_sync(&ath->ctxtsw);
129
130 hu->priv = NULL;
131 kfree(ath);
132
133 return 0;
134}
135
136static int ath_flush(struct hci_uart *hu)
137{
138 struct ath_struct *ath = hu->priv;
139
140 BT_DBG("hu %p", hu);
141
142 skb_queue_purge(&ath->txq);
143
144 return 0;
145}
146
147static int ath_vendor_cmd(struct hci_dev *hdev, uint8_t opcode, uint16_t index,
148 const void *data, size_t dlen)
149{
150 struct sk_buff *skb;
151 struct ath_vendor_cmd cmd;
152
153 if (dlen > sizeof(cmd.data))
154 return -EINVAL;
155
156 cmd.opcode = opcode;
157 cmd.index = cpu_to_le16(index);
158 cmd.len = dlen;
159 memcpy(cmd.data, data, dlen);
160
161 skb = __hci_cmd_sync(hdev, 0xfc0b, dlen + 4, &cmd, HCI_INIT_TIMEOUT);
162 if (IS_ERR(skb))
163 return PTR_ERR(skb);
164 kfree_skb(skb);
165
166 return 0;
167}
168
169static int ath_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
170{
171 return ath_vendor_cmd(hdev, OP_WRITE_TAG, INDEX_BDADDR, bdaddr,
172 sizeof(*bdaddr));
173}
174
175static int ath_setup(struct hci_uart *hu)
176{
177 BT_DBG("hu %p", hu);
178
179 hu->hdev->set_bdaddr = ath_set_bdaddr;
180
181 return 0;
182}
183
184static const struct h4_recv_pkt ath_recv_pkts[] = {
185 { H4_RECV_ACL, .recv = hci_recv_frame },
186 { H4_RECV_SCO, .recv = hci_recv_frame },
187 { H4_RECV_EVENT, .recv = hci_recv_frame },
188};
189
190static int ath_recv(struct hci_uart *hu, const void *data, int count)
191{
192 struct ath_struct *ath = hu->priv;
193
194 ath->rx_skb = h4_recv_buf(hu->hdev, ath->rx_skb, data, count,
195 ath_recv_pkts, ARRAY_SIZE(ath_recv_pkts));
196 if (IS_ERR(ath->rx_skb)) {
197 int err = PTR_ERR(ath->rx_skb);
198 bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
199 ath->rx_skb = NULL;
200 return err;
201 }
202
203 return count;
204}
205
206#define HCI_OP_ATH_SLEEP 0xFC04
207
208static int ath_enqueue(struct hci_uart *hu, struct sk_buff *skb)
209{
210 struct ath_struct *ath = hu->priv;
211
212 if (hci_skb_pkt_type(skb) == HCI_SCODATA_PKT) {
213 kfree_skb(skb);
214 return 0;
215 }
216
217 /* Update power management enable flag with parameters of
218 * HCI sleep enable vendor specific HCI command.
219 */
220 if (hci_skb_pkt_type(skb) == HCI_COMMAND_PKT) {
221 struct hci_command_hdr *hdr = (void *)skb->data;
222
223 if (__le16_to_cpu(hdr->opcode) == HCI_OP_ATH_SLEEP)
224 ath->cur_sleep = skb->data[HCI_COMMAND_HDR_SIZE];
225 }
226
227 BT_DBG("hu %p skb %p", hu, skb);
228
229 /* Prepend skb with frame type */
230 memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
231
232 skb_queue_tail(&ath->txq, skb);
233 set_bit(HCI_UART_SENDING, &hu->tx_state);
234
235 schedule_work(&ath->ctxtsw);
236
237 return 0;
238}
239
240static struct sk_buff *ath_dequeue(struct hci_uart *hu)
241{
242 struct ath_struct *ath = hu->priv;
243
244 return skb_dequeue(&ath->txq);
245}
246
247static const struct hci_uart_proto athp = {
248 .id = HCI_UART_ATH3K,
249 .name = "ATH3K",
250 .manufacturer = 69,
251 .open = ath_open,
252 .close = ath_close,
253 .flush = ath_flush,
254 .setup = ath_setup,
255 .recv = ath_recv,
256 .enqueue = ath_enqueue,
257 .dequeue = ath_dequeue,
258};
259
260int __init ath_init(void)
261{
262 return hci_uart_register_proto(&athp);
263}
264
265int __exit ath_deinit(void)
266{
267 return hci_uart_unregister_proto(&athp);
268}
1/*
2 * Atheros Communication Bluetooth HCIATH3K UART protocol
3 *
4 * HCIATH3K (HCI Atheros AR300x Protocol) is a Atheros Communication's
5 * power management protocol extension to H4 to support AR300x Bluetooth Chip.
6 *
7 * Copyright (c) 2009-2010 Atheros Communications Inc.
8 *
9 * Acknowledgements:
10 * This file is based on hci_h4.c, which was written
11 * by Maxim Krasnyansky and Marcel Holtmann.
12 *
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License as published by
15 * the Free Software Foundation; either version 2 of the License, or
16 * (at your option) any later version.
17 *
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
22 *
23 * You should have received a copy of the GNU General Public License
24 * along with this program; if not, write to the Free Software
25 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
26 *
27 */
28
29#include <linux/module.h>
30#include <linux/kernel.h>
31
32#include <linux/init.h>
33#include <linux/slab.h>
34#include <linux/tty.h>
35#include <linux/errno.h>
36#include <linux/ioctl.h>
37#include <linux/skbuff.h>
38
39#include <net/bluetooth/bluetooth.h>
40#include <net/bluetooth/hci_core.h>
41
42#include "hci_uart.h"
43
44struct ath_struct {
45 struct hci_uart *hu;
46 unsigned int cur_sleep;
47
48 struct sk_buff *rx_skb;
49 struct sk_buff_head txq;
50 struct work_struct ctxtsw;
51};
52
53#define OP_WRITE_TAG 0x01
54
55#define INDEX_BDADDR 0x01
56
57struct ath_vendor_cmd {
58 __u8 opcode;
59 __le16 index;
60 __u8 len;
61 __u8 data[251];
62} __packed;
63
64static int ath_wakeup_ar3k(struct tty_struct *tty)
65{
66 int status = tty->driver->ops->tiocmget(tty);
67
68 if (status & TIOCM_CTS)
69 return status;
70
71 /* Clear RTS first */
72 tty->driver->ops->tiocmget(tty);
73 tty->driver->ops->tiocmset(tty, 0x00, TIOCM_RTS);
74 msleep(20);
75
76 /* Set RTS, wake up board */
77 tty->driver->ops->tiocmget(tty);
78 tty->driver->ops->tiocmset(tty, TIOCM_RTS, 0x00);
79 msleep(20);
80
81 status = tty->driver->ops->tiocmget(tty);
82 return status;
83}
84
85static void ath_hci_uart_work(struct work_struct *work)
86{
87 int status;
88 struct ath_struct *ath;
89 struct hci_uart *hu;
90 struct tty_struct *tty;
91
92 ath = container_of(work, struct ath_struct, ctxtsw);
93
94 hu = ath->hu;
95 tty = hu->tty;
96
97 /* verify and wake up controller */
98 if (ath->cur_sleep) {
99 status = ath_wakeup_ar3k(tty);
100 if (!(status & TIOCM_CTS))
101 return;
102 }
103
104 /* Ready to send Data */
105 clear_bit(HCI_UART_SENDING, &hu->tx_state);
106 hci_uart_tx_wakeup(hu);
107}
108
109static int ath_open(struct hci_uart *hu)
110{
111 struct ath_struct *ath;
112
113 BT_DBG("hu %p", hu);
114
115 ath = kzalloc(sizeof(*ath), GFP_KERNEL);
116 if (!ath)
117 return -ENOMEM;
118
119 skb_queue_head_init(&ath->txq);
120
121 hu->priv = ath;
122 ath->hu = hu;
123
124 INIT_WORK(&ath->ctxtsw, ath_hci_uart_work);
125
126 return 0;
127}
128
129static int ath_close(struct hci_uart *hu)
130{
131 struct ath_struct *ath = hu->priv;
132
133 BT_DBG("hu %p", hu);
134
135 skb_queue_purge(&ath->txq);
136
137 kfree_skb(ath->rx_skb);
138
139 cancel_work_sync(&ath->ctxtsw);
140
141 hu->priv = NULL;
142 kfree(ath);
143
144 return 0;
145}
146
147static int ath_flush(struct hci_uart *hu)
148{
149 struct ath_struct *ath = hu->priv;
150
151 BT_DBG("hu %p", hu);
152
153 skb_queue_purge(&ath->txq);
154
155 return 0;
156}
157
158static int ath_vendor_cmd(struct hci_dev *hdev, uint8_t opcode, uint16_t index,
159 const void *data, size_t dlen)
160{
161 struct sk_buff *skb;
162 struct ath_vendor_cmd cmd;
163
164 if (dlen > sizeof(cmd.data))
165 return -EINVAL;
166
167 cmd.opcode = opcode;
168 cmd.index = cpu_to_le16(index);
169 cmd.len = dlen;
170 memcpy(cmd.data, data, dlen);
171
172 skb = __hci_cmd_sync(hdev, 0xfc0b, dlen + 4, &cmd, HCI_INIT_TIMEOUT);
173 if (IS_ERR(skb))
174 return PTR_ERR(skb);
175 kfree_skb(skb);
176
177 return 0;
178}
179
180static int ath_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
181{
182 return ath_vendor_cmd(hdev, OP_WRITE_TAG, INDEX_BDADDR, bdaddr,
183 sizeof(*bdaddr));
184}
185
186static int ath_setup(struct hci_uart *hu)
187{
188 BT_DBG("hu %p", hu);
189
190 hu->hdev->set_bdaddr = ath_set_bdaddr;
191
192 return 0;
193}
194
195static const struct h4_recv_pkt ath_recv_pkts[] = {
196 { H4_RECV_ACL, .recv = hci_recv_frame },
197 { H4_RECV_SCO, .recv = hci_recv_frame },
198 { H4_RECV_EVENT, .recv = hci_recv_frame },
199};
200
201static int ath_recv(struct hci_uart *hu, const void *data, int count)
202{
203 struct ath_struct *ath = hu->priv;
204
205 ath->rx_skb = h4_recv_buf(hu->hdev, ath->rx_skb, data, count,
206 ath_recv_pkts, ARRAY_SIZE(ath_recv_pkts));
207 if (IS_ERR(ath->rx_skb)) {
208 int err = PTR_ERR(ath->rx_skb);
209 bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
210 ath->rx_skb = NULL;
211 return err;
212 }
213
214 return count;
215}
216
217#define HCI_OP_ATH_SLEEP 0xFC04
218
219static int ath_enqueue(struct hci_uart *hu, struct sk_buff *skb)
220{
221 struct ath_struct *ath = hu->priv;
222
223 if (hci_skb_pkt_type(skb) == HCI_SCODATA_PKT) {
224 kfree_skb(skb);
225 return 0;
226 }
227
228 /* Update power management enable flag with parameters of
229 * HCI sleep enable vendor specific HCI command.
230 */
231 if (hci_skb_pkt_type(skb) == HCI_COMMAND_PKT) {
232 struct hci_command_hdr *hdr = (void *)skb->data;
233
234 if (__le16_to_cpu(hdr->opcode) == HCI_OP_ATH_SLEEP)
235 ath->cur_sleep = skb->data[HCI_COMMAND_HDR_SIZE];
236 }
237
238 BT_DBG("hu %p skb %p", hu, skb);
239
240 /* Prepend skb with frame type */
241 memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
242
243 skb_queue_tail(&ath->txq, skb);
244 set_bit(HCI_UART_SENDING, &hu->tx_state);
245
246 schedule_work(&ath->ctxtsw);
247
248 return 0;
249}
250
251static struct sk_buff *ath_dequeue(struct hci_uart *hu)
252{
253 struct ath_struct *ath = hu->priv;
254
255 return skb_dequeue(&ath->txq);
256}
257
258static const struct hci_uart_proto athp = {
259 .id = HCI_UART_ATH3K,
260 .name = "ATH3K",
261 .manufacturer = 69,
262 .open = ath_open,
263 .close = ath_close,
264 .flush = ath_flush,
265 .setup = ath_setup,
266 .recv = ath_recv,
267 .enqueue = ath_enqueue,
268 .dequeue = ath_dequeue,
269};
270
271int __init ath_init(void)
272{
273 return hci_uart_register_proto(&athp);
274}
275
276int __exit ath_deinit(void)
277{
278 return hci_uart_unregister_proto(&athp);
279}