Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * misc.c
4 *
5 * This is a collection of several routines used to extract the kernel
6 * which includes KASLR relocation, decompression, ELF parsing, and
7 * relocation processing. Additionally included are the screen and serial
8 * output functions and related debugging support functions.
9 *
10 * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
11 * puts by Nick Holloway 1993, better puts by Martin Mares 1995
12 * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
13 */
14
15#include "misc.h"
16#include "error.h"
17#include "pgtable.h"
18#include "../string.h"
19#include "../voffset.h"
20#include <asm/bootparam_utils.h>
21
22/*
23 * WARNING!!
24 * This code is compiled with -fPIC and it is relocated dynamically at
25 * run time, but no relocation processing is performed. This means that
26 * it is not safe to place pointers in static structures.
27 */
28
29/* Macros used by the included decompressor code below. */
30#define STATIC static
31/* Define an externally visible malloc()/free(). */
32#define MALLOC_VISIBLE
33#include <linux/decompress/mm.h>
34
35/*
36 * Provide definitions of memzero and memmove as some of the decompressors will
37 * try to define their own functions if these are not defined as macros.
38 */
39#define memzero(s, n) memset((s), 0, (n))
40#ifndef memmove
41#define memmove memmove
42/* Functions used by the included decompressor code below. */
43void *memmove(void *dest, const void *src, size_t n);
44#endif
45
46/*
47 * This is set up by the setup-routine at boot-time
48 */
49struct boot_params *boot_params_ptr;
50
51struct port_io_ops pio_ops;
52
53memptr free_mem_ptr;
54memptr free_mem_end_ptr;
55int spurious_nmi_count;
56
57static char *vidmem;
58static int vidport;
59
60/* These might be accessed before .bss is cleared, so use .data instead. */
61static int lines __section(".data");
62static int cols __section(".data");
63
64#ifdef CONFIG_KERNEL_GZIP
65#include "../../../../lib/decompress_inflate.c"
66#endif
67
68#ifdef CONFIG_KERNEL_BZIP2
69#include "../../../../lib/decompress_bunzip2.c"
70#endif
71
72#ifdef CONFIG_KERNEL_LZMA
73#include "../../../../lib/decompress_unlzma.c"
74#endif
75
76#ifdef CONFIG_KERNEL_XZ
77#include "../../../../lib/decompress_unxz.c"
78#endif
79
80#ifdef CONFIG_KERNEL_LZO
81#include "../../../../lib/decompress_unlzo.c"
82#endif
83
84#ifdef CONFIG_KERNEL_LZ4
85#include "../../../../lib/decompress_unlz4.c"
86#endif
87
88#ifdef CONFIG_KERNEL_ZSTD
89#include "../../../../lib/decompress_unzstd.c"
90#endif
91/*
92 * NOTE: When adding a new decompressor, please update the analysis in
93 * ../header.S.
94 */
95
96static void scroll(void)
97{
98 int i;
99
100 memmove(vidmem, vidmem + cols * 2, (lines - 1) * cols * 2);
101 for (i = (lines - 1) * cols * 2; i < lines * cols * 2; i += 2)
102 vidmem[i] = ' ';
103}
104
105#define XMTRDY 0x20
106
107#define TXR 0 /* Transmit register (WRITE) */
108#define LSR 5 /* Line Status */
109static void serial_putchar(int ch)
110{
111 unsigned timeout = 0xffff;
112
113 while ((inb(early_serial_base + LSR) & XMTRDY) == 0 && --timeout)
114 cpu_relax();
115
116 outb(ch, early_serial_base + TXR);
117}
118
119void __putstr(const char *s)
120{
121 int x, y, pos;
122 char c;
123
124 if (early_serial_base) {
125 const char *str = s;
126 while (*str) {
127 if (*str == '\n')
128 serial_putchar('\r');
129 serial_putchar(*str++);
130 }
131 }
132
133 if (lines == 0 || cols == 0)
134 return;
135
136 x = boot_params_ptr->screen_info.orig_x;
137 y = boot_params_ptr->screen_info.orig_y;
138
139 while ((c = *s++) != '\0') {
140 if (c == '\n') {
141 x = 0;
142 if (++y >= lines) {
143 scroll();
144 y--;
145 }
146 } else {
147 vidmem[(x + cols * y) * 2] = c;
148 if (++x >= cols) {
149 x = 0;
150 if (++y >= lines) {
151 scroll();
152 y--;
153 }
154 }
155 }
156 }
157
158 boot_params_ptr->screen_info.orig_x = x;
159 boot_params_ptr->screen_info.orig_y = y;
160
161 pos = (x + cols * y) * 2; /* Update cursor position */
162 outb(14, vidport);
163 outb(0xff & (pos >> 9), vidport+1);
164 outb(15, vidport);
165 outb(0xff & (pos >> 1), vidport+1);
166}
167
168static noinline void __putnum(unsigned long value, unsigned int base,
169 int mindig)
170{
171 char buf[8*sizeof(value)+1];
172 char *p;
173
174 p = buf + sizeof(buf);
175 *--p = '\0';
176
177 while (mindig-- > 0 || value) {
178 unsigned char digit = value % base;
179 digit += (digit >= 10) ? ('a'-10) : '0';
180 *--p = digit;
181
182 value /= base;
183 }
184
185 __putstr(p);
186}
187
188void __puthex(unsigned long value)
189{
190 __putnum(value, 16, sizeof(value)*2);
191}
192
193void __putdec(unsigned long value)
194{
195 __putnum(value, 10, 1);
196}
197
198#ifdef CONFIG_X86_NEED_RELOCS
199static void handle_relocations(void *output, unsigned long output_len,
200 unsigned long virt_addr)
201{
202 int *reloc;
203 unsigned long delta, map, ptr;
204 unsigned long min_addr = (unsigned long)output;
205 unsigned long max_addr = min_addr + (VO___bss_start - VO__text);
206
207 /*
208 * Calculate the delta between where vmlinux was linked to load
209 * and where it was actually loaded.
210 */
211 delta = min_addr - LOAD_PHYSICAL_ADDR;
212
213 /*
214 * The kernel contains a table of relocation addresses. Those
215 * addresses have the final load address of the kernel in virtual
216 * memory. We are currently working in the self map. So we need to
217 * create an adjustment for kernel memory addresses to the self map.
218 * This will involve subtracting out the base address of the kernel.
219 */
220 map = delta - __START_KERNEL_map;
221
222 /*
223 * 32-bit always performs relocations. 64-bit relocations are only
224 * needed if KASLR has chosen a different starting address offset
225 * from __START_KERNEL_map.
226 */
227 if (IS_ENABLED(CONFIG_X86_64))
228 delta = virt_addr - LOAD_PHYSICAL_ADDR;
229
230 if (!delta) {
231 debug_putstr("No relocation needed... ");
232 return;
233 }
234 debug_putstr("Performing relocations... ");
235
236 /*
237 * Process relocations: 32 bit relocations first then 64 bit after.
238 * Three sets of binary relocations are added to the end of the kernel
239 * before compression. Each relocation table entry is the kernel
240 * address of the location which needs to be updated stored as a
241 * 32-bit value which is sign extended to 64 bits.
242 *
243 * Format is:
244 *
245 * kernel bits...
246 * 0 - zero terminator for 64 bit relocations
247 * 64 bit relocation repeated
248 * 0 - zero terminator for inverse 32 bit relocations
249 * 32 bit inverse relocation repeated
250 * 0 - zero terminator for 32 bit relocations
251 * 32 bit relocation repeated
252 *
253 * So we work backwards from the end of the decompressed image.
254 */
255 for (reloc = output + output_len - sizeof(*reloc); *reloc; reloc--) {
256 long extended = *reloc;
257 extended += map;
258
259 ptr = (unsigned long)extended;
260 if (ptr < min_addr || ptr > max_addr)
261 error("32-bit relocation outside of kernel!\n");
262
263 *(uint32_t *)ptr += delta;
264 }
265#ifdef CONFIG_X86_64
266 while (*--reloc) {
267 long extended = *reloc;
268 extended += map;
269
270 ptr = (unsigned long)extended;
271 if (ptr < min_addr || ptr > max_addr)
272 error("inverse 32-bit relocation outside of kernel!\n");
273
274 *(int32_t *)ptr -= delta;
275 }
276 for (reloc--; *reloc; reloc--) {
277 long extended = *reloc;
278 extended += map;
279
280 ptr = (unsigned long)extended;
281 if (ptr < min_addr || ptr > max_addr)
282 error("64-bit relocation outside of kernel!\n");
283
284 *(uint64_t *)ptr += delta;
285 }
286#endif
287}
288#else
289static inline void handle_relocations(void *output, unsigned long output_len,
290 unsigned long virt_addr)
291{ }
292#endif
293
294static size_t parse_elf(void *output)
295{
296#ifdef CONFIG_X86_64
297 Elf64_Ehdr ehdr;
298 Elf64_Phdr *phdrs, *phdr;
299#else
300 Elf32_Ehdr ehdr;
301 Elf32_Phdr *phdrs, *phdr;
302#endif
303 void *dest;
304 int i;
305
306 memcpy(&ehdr, output, sizeof(ehdr));
307 if (ehdr.e_ident[EI_MAG0] != ELFMAG0 ||
308 ehdr.e_ident[EI_MAG1] != ELFMAG1 ||
309 ehdr.e_ident[EI_MAG2] != ELFMAG2 ||
310 ehdr.e_ident[EI_MAG3] != ELFMAG3)
311 error("Kernel is not a valid ELF file");
312
313 debug_putstr("Parsing ELF... ");
314
315 phdrs = malloc(sizeof(*phdrs) * ehdr.e_phnum);
316 if (!phdrs)
317 error("Failed to allocate space for phdrs");
318
319 memcpy(phdrs, output + ehdr.e_phoff, sizeof(*phdrs) * ehdr.e_phnum);
320
321 for (i = 0; i < ehdr.e_phnum; i++) {
322 phdr = &phdrs[i];
323
324 switch (phdr->p_type) {
325 case PT_LOAD:
326#ifdef CONFIG_X86_64
327 if ((phdr->p_align % 0x200000) != 0)
328 error("Alignment of LOAD segment isn't multiple of 2MB");
329#endif
330#ifdef CONFIG_RELOCATABLE
331 dest = output;
332 dest += (phdr->p_paddr - LOAD_PHYSICAL_ADDR);
333#else
334 dest = (void *)(phdr->p_paddr);
335#endif
336 memmove(dest, output + phdr->p_offset, phdr->p_filesz);
337 break;
338 default: /* Ignore other PT_* */ break;
339 }
340 }
341
342 free(phdrs);
343
344 return ehdr.e_entry - LOAD_PHYSICAL_ADDR;
345}
346
347const unsigned long kernel_text_size = VO___start_rodata - VO__text;
348const unsigned long kernel_total_size = VO__end - VO__text;
349
350static u8 boot_heap[BOOT_HEAP_SIZE] __aligned(4);
351
352extern unsigned char input_data[];
353extern unsigned int input_len, output_len;
354
355unsigned long decompress_kernel(unsigned char *outbuf, unsigned long virt_addr,
356 void (*error)(char *x))
357{
358 unsigned long entry;
359
360 if (!free_mem_ptr) {
361 free_mem_ptr = (unsigned long)boot_heap;
362 free_mem_end_ptr = (unsigned long)boot_heap + sizeof(boot_heap);
363 }
364
365 if (__decompress(input_data, input_len, NULL, NULL, outbuf, output_len,
366 NULL, error) < 0)
367 return ULONG_MAX;
368
369 entry = parse_elf(outbuf);
370 handle_relocations(outbuf, output_len, virt_addr);
371
372 return entry;
373}
374
375/*
376 * Set the memory encryption xloadflag based on the mem_encrypt= command line
377 * parameter, if provided.
378 */
379static void parse_mem_encrypt(struct setup_header *hdr)
380{
381 int on = cmdline_find_option_bool("mem_encrypt=on");
382 int off = cmdline_find_option_bool("mem_encrypt=off");
383
384 if (on > off)
385 hdr->xloadflags |= XLF_MEM_ENCRYPTION;
386}
387
388static void early_sev_detect(void)
389{
390 /*
391 * Accessing video memory causes guest termination because
392 * the boot stage2 #VC handler of SEV-ES/SNP guests does not
393 * support MMIO handling and kexec -c adds screen_info to the
394 * boot parameters passed to the kexec kernel, which causes
395 * console output to be dumped to both video and serial.
396 */
397 if (sev_status & MSR_AMD64_SEV_ES_ENABLED)
398 lines = cols = 0;
399}
400
401/*
402 * The compressed kernel image (ZO), has been moved so that its position
403 * is against the end of the buffer used to hold the uncompressed kernel
404 * image (VO) and the execution environment (.bss, .brk), which makes sure
405 * there is room to do the in-place decompression. (See header.S for the
406 * calculations.)
407 *
408 * |-----compressed kernel image------|
409 * V V
410 * 0 extract_offset +INIT_SIZE
411 * |-----------|---------------|-------------------------|--------|
412 * | | | |
413 * VO__text startup_32 of ZO VO__end ZO__end
414 * ^ ^
415 * |-------uncompressed kernel image---------|
416 *
417 */
418asmlinkage __visible void *extract_kernel(void *rmode, unsigned char *output)
419{
420 unsigned long virt_addr = LOAD_PHYSICAL_ADDR;
421 memptr heap = (memptr)boot_heap;
422 unsigned long needed_size;
423 size_t entry_offset;
424
425 /* Retain x86 boot parameters pointer passed from startup_32/64. */
426 boot_params_ptr = rmode;
427
428 /* Clear flags intended for solely in-kernel use. */
429 boot_params_ptr->hdr.loadflags &= ~KASLR_FLAG;
430
431 parse_mem_encrypt(&boot_params_ptr->hdr);
432
433 sanitize_boot_params(boot_params_ptr);
434
435 if (boot_params_ptr->screen_info.orig_video_mode == 7) {
436 vidmem = (char *) 0xb0000;
437 vidport = 0x3b4;
438 } else {
439 vidmem = (char *) 0xb8000;
440 vidport = 0x3d4;
441 }
442
443 lines = boot_params_ptr->screen_info.orig_video_lines;
444 cols = boot_params_ptr->screen_info.orig_video_cols;
445
446 init_default_io_ops();
447
448 /*
449 * Detect TDX guest environment.
450 *
451 * It has to be done before console_init() in order to use
452 * paravirtualized port I/O operations if needed.
453 */
454 early_tdx_detect();
455
456 early_sev_detect();
457
458 console_init();
459
460 /*
461 * Save RSDP address for later use. Have this after console_init()
462 * so that early debugging output from the RSDP parsing code can be
463 * collected.
464 */
465 boot_params_ptr->acpi_rsdp_addr = get_rsdp_addr();
466
467 debug_putstr("early console in extract_kernel\n");
468
469 free_mem_ptr = heap; /* Heap */
470 free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
471
472 /*
473 * The memory hole needed for the kernel is the larger of either
474 * the entire decompressed kernel plus relocation table, or the
475 * entire decompressed kernel plus .bss and .brk sections.
476 *
477 * On X86_64, the memory is mapped with PMD pages. Round the
478 * size up so that the full extent of PMD pages mapped is
479 * included in the check against the valid memory table
480 * entries. This ensures the full mapped area is usable RAM
481 * and doesn't include any reserved areas.
482 */
483 needed_size = max_t(unsigned long, output_len, kernel_total_size);
484#ifdef CONFIG_X86_64
485 needed_size = ALIGN(needed_size, MIN_KERNEL_ALIGN);
486#endif
487
488 /* Report initial kernel position details. */
489 debug_putaddr(input_data);
490 debug_putaddr(input_len);
491 debug_putaddr(output);
492 debug_putaddr(output_len);
493 debug_putaddr(kernel_total_size);
494 debug_putaddr(needed_size);
495
496#ifdef CONFIG_X86_64
497 /* Report address of 32-bit trampoline */
498 debug_putaddr(trampoline_32bit);
499#endif
500
501 choose_random_location((unsigned long)input_data, input_len,
502 (unsigned long *)&output,
503 needed_size,
504 &virt_addr);
505
506 /* Validate memory location choices. */
507 if ((unsigned long)output & (MIN_KERNEL_ALIGN - 1))
508 error("Destination physical address inappropriately aligned");
509 if (virt_addr & (MIN_KERNEL_ALIGN - 1))
510 error("Destination virtual address inappropriately aligned");
511#ifdef CONFIG_X86_64
512 if (heap > 0x3fffffffffffUL)
513 error("Destination address too large");
514 if (virt_addr + needed_size > KERNEL_IMAGE_SIZE)
515 error("Destination virtual address is beyond the kernel mapping area");
516#else
517 if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff))
518 error("Destination address too large");
519#endif
520#ifndef CONFIG_RELOCATABLE
521 if (virt_addr != LOAD_PHYSICAL_ADDR)
522 error("Destination virtual address changed when not relocatable");
523#endif
524
525 debug_putstr("\nDecompressing Linux... ");
526
527 if (init_unaccepted_memory()) {
528 debug_putstr("Accepting memory... ");
529 accept_memory(__pa(output), needed_size);
530 }
531
532 entry_offset = decompress_kernel(output, virt_addr, error);
533
534 debug_putstr("done.\nBooting the kernel (entry_offset: 0x");
535 debug_puthex(entry_offset);
536 debug_putstr(").\n");
537
538 /* Disable exception handling before booting the kernel */
539 cleanup_exception_handling();
540
541 if (spurious_nmi_count) {
542 error_putstr("Spurious early NMIs ignored: ");
543 error_putdec(spurious_nmi_count);
544 error_putstr("\n");
545 }
546
547 return output + entry_offset;
548}
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * misc.c
4 *
5 * This is a collection of several routines used to extract the kernel
6 * which includes KASLR relocation, decompression, ELF parsing, and
7 * relocation processing. Additionally included are the screen and serial
8 * output functions and related debugging support functions.
9 *
10 * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
11 * puts by Nick Holloway 1993, better puts by Martin Mares 1995
12 * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
13 */
14
15#include "misc.h"
16#include "error.h"
17#include "pgtable.h"
18#include "../string.h"
19#include "../voffset.h"
20
21/*
22 * WARNING!!
23 * This code is compiled with -fPIC and it is relocated dynamically at
24 * run time, but no relocation processing is performed. This means that
25 * it is not safe to place pointers in static structures.
26 */
27
28/* Macros used by the included decompressor code below. */
29#define STATIC static
30
31/*
32 * Use normal definitions of mem*() from string.c. There are already
33 * included header files which expect a definition of memset() and by
34 * the time we define memset macro, it is too late.
35 */
36#undef memcpy
37#undef memset
38#define memzero(s, n) memset((s), 0, (n))
39#define memmove memmove
40
41/* Functions used by the included decompressor code below. */
42void *memmove(void *dest, const void *src, size_t n);
43
44/*
45 * This is set up by the setup-routine at boot-time
46 */
47struct boot_params *boot_params;
48
49memptr free_mem_ptr;
50memptr free_mem_end_ptr;
51
52static char *vidmem;
53static int vidport;
54static int lines, cols;
55
56#ifdef CONFIG_KERNEL_GZIP
57#include "../../../../lib/decompress_inflate.c"
58#endif
59
60#ifdef CONFIG_KERNEL_BZIP2
61#include "../../../../lib/decompress_bunzip2.c"
62#endif
63
64#ifdef CONFIG_KERNEL_LZMA
65#include "../../../../lib/decompress_unlzma.c"
66#endif
67
68#ifdef CONFIG_KERNEL_XZ
69#include "../../../../lib/decompress_unxz.c"
70#endif
71
72#ifdef CONFIG_KERNEL_LZO
73#include "../../../../lib/decompress_unlzo.c"
74#endif
75
76#ifdef CONFIG_KERNEL_LZ4
77#include "../../../../lib/decompress_unlz4.c"
78#endif
79/*
80 * NOTE: When adding a new decompressor, please update the analysis in
81 * ../header.S.
82 */
83
84static void scroll(void)
85{
86 int i;
87
88 memmove(vidmem, vidmem + cols * 2, (lines - 1) * cols * 2);
89 for (i = (lines - 1) * cols * 2; i < lines * cols * 2; i += 2)
90 vidmem[i] = ' ';
91}
92
93#define XMTRDY 0x20
94
95#define TXR 0 /* Transmit register (WRITE) */
96#define LSR 5 /* Line Status */
97static void serial_putchar(int ch)
98{
99 unsigned timeout = 0xffff;
100
101 while ((inb(early_serial_base + LSR) & XMTRDY) == 0 && --timeout)
102 cpu_relax();
103
104 outb(ch, early_serial_base + TXR);
105}
106
107void __putstr(const char *s)
108{
109 int x, y, pos;
110 char c;
111
112 if (early_serial_base) {
113 const char *str = s;
114 while (*str) {
115 if (*str == '\n')
116 serial_putchar('\r');
117 serial_putchar(*str++);
118 }
119 }
120
121 if (lines == 0 || cols == 0)
122 return;
123
124 x = boot_params->screen_info.orig_x;
125 y = boot_params->screen_info.orig_y;
126
127 while ((c = *s++) != '\0') {
128 if (c == '\n') {
129 x = 0;
130 if (++y >= lines) {
131 scroll();
132 y--;
133 }
134 } else {
135 vidmem[(x + cols * y) * 2] = c;
136 if (++x >= cols) {
137 x = 0;
138 if (++y >= lines) {
139 scroll();
140 y--;
141 }
142 }
143 }
144 }
145
146 boot_params->screen_info.orig_x = x;
147 boot_params->screen_info.orig_y = y;
148
149 pos = (x + cols * y) * 2; /* Update cursor position */
150 outb(14, vidport);
151 outb(0xff & (pos >> 9), vidport+1);
152 outb(15, vidport);
153 outb(0xff & (pos >> 1), vidport+1);
154}
155
156void __puthex(unsigned long value)
157{
158 char alpha[2] = "0";
159 int bits;
160
161 for (bits = sizeof(value) * 8 - 4; bits >= 0; bits -= 4) {
162 unsigned long digit = (value >> bits) & 0xf;
163
164 if (digit < 0xA)
165 alpha[0] = '0' + digit;
166 else
167 alpha[0] = 'a' + (digit - 0xA);
168
169 __putstr(alpha);
170 }
171}
172
173#if CONFIG_X86_NEED_RELOCS
174static void handle_relocations(void *output, unsigned long output_len,
175 unsigned long virt_addr)
176{
177 int *reloc;
178 unsigned long delta, map, ptr;
179 unsigned long min_addr = (unsigned long)output;
180 unsigned long max_addr = min_addr + (VO___bss_start - VO__text);
181
182 /*
183 * Calculate the delta between where vmlinux was linked to load
184 * and where it was actually loaded.
185 */
186 delta = min_addr - LOAD_PHYSICAL_ADDR;
187
188 /*
189 * The kernel contains a table of relocation addresses. Those
190 * addresses have the final load address of the kernel in virtual
191 * memory. We are currently working in the self map. So we need to
192 * create an adjustment for kernel memory addresses to the self map.
193 * This will involve subtracting out the base address of the kernel.
194 */
195 map = delta - __START_KERNEL_map;
196
197 /*
198 * 32-bit always performs relocations. 64-bit relocations are only
199 * needed if KASLR has chosen a different starting address offset
200 * from __START_KERNEL_map.
201 */
202 if (IS_ENABLED(CONFIG_X86_64))
203 delta = virt_addr - LOAD_PHYSICAL_ADDR;
204
205 if (!delta) {
206 debug_putstr("No relocation needed... ");
207 return;
208 }
209 debug_putstr("Performing relocations... ");
210
211 /*
212 * Process relocations: 32 bit relocations first then 64 bit after.
213 * Three sets of binary relocations are added to the end of the kernel
214 * before compression. Each relocation table entry is the kernel
215 * address of the location which needs to be updated stored as a
216 * 32-bit value which is sign extended to 64 bits.
217 *
218 * Format is:
219 *
220 * kernel bits...
221 * 0 - zero terminator for 64 bit relocations
222 * 64 bit relocation repeated
223 * 0 - zero terminator for inverse 32 bit relocations
224 * 32 bit inverse relocation repeated
225 * 0 - zero terminator for 32 bit relocations
226 * 32 bit relocation repeated
227 *
228 * So we work backwards from the end of the decompressed image.
229 */
230 for (reloc = output + output_len - sizeof(*reloc); *reloc; reloc--) {
231 long extended = *reloc;
232 extended += map;
233
234 ptr = (unsigned long)extended;
235 if (ptr < min_addr || ptr > max_addr)
236 error("32-bit relocation outside of kernel!\n");
237
238 *(uint32_t *)ptr += delta;
239 }
240#ifdef CONFIG_X86_64
241 while (*--reloc) {
242 long extended = *reloc;
243 extended += map;
244
245 ptr = (unsigned long)extended;
246 if (ptr < min_addr || ptr > max_addr)
247 error("inverse 32-bit relocation outside of kernel!\n");
248
249 *(int32_t *)ptr -= delta;
250 }
251 for (reloc--; *reloc; reloc--) {
252 long extended = *reloc;
253 extended += map;
254
255 ptr = (unsigned long)extended;
256 if (ptr < min_addr || ptr > max_addr)
257 error("64-bit relocation outside of kernel!\n");
258
259 *(uint64_t *)ptr += delta;
260 }
261#endif
262}
263#else
264static inline void handle_relocations(void *output, unsigned long output_len,
265 unsigned long virt_addr)
266{ }
267#endif
268
269static void parse_elf(void *output)
270{
271#ifdef CONFIG_X86_64
272 Elf64_Ehdr ehdr;
273 Elf64_Phdr *phdrs, *phdr;
274#else
275 Elf32_Ehdr ehdr;
276 Elf32_Phdr *phdrs, *phdr;
277#endif
278 void *dest;
279 int i;
280
281 memcpy(&ehdr, output, sizeof(ehdr));
282 if (ehdr.e_ident[EI_MAG0] != ELFMAG0 ||
283 ehdr.e_ident[EI_MAG1] != ELFMAG1 ||
284 ehdr.e_ident[EI_MAG2] != ELFMAG2 ||
285 ehdr.e_ident[EI_MAG3] != ELFMAG3) {
286 error("Kernel is not a valid ELF file");
287 return;
288 }
289
290 debug_putstr("Parsing ELF... ");
291
292 phdrs = malloc(sizeof(*phdrs) * ehdr.e_phnum);
293 if (!phdrs)
294 error("Failed to allocate space for phdrs");
295
296 memcpy(phdrs, output + ehdr.e_phoff, sizeof(*phdrs) * ehdr.e_phnum);
297
298 for (i = 0; i < ehdr.e_phnum; i++) {
299 phdr = &phdrs[i];
300
301 switch (phdr->p_type) {
302 case PT_LOAD:
303#ifdef CONFIG_X86_64
304 if ((phdr->p_align % 0x200000) != 0)
305 error("Alignment of LOAD segment isn't multiple of 2MB");
306#endif
307#ifdef CONFIG_RELOCATABLE
308 dest = output;
309 dest += (phdr->p_paddr - LOAD_PHYSICAL_ADDR);
310#else
311 dest = (void *)(phdr->p_paddr);
312#endif
313 memmove(dest, output + phdr->p_offset, phdr->p_filesz);
314 break;
315 default: /* Ignore other PT_* */ break;
316 }
317 }
318
319 free(phdrs);
320}
321
322/*
323 * The compressed kernel image (ZO), has been moved so that its position
324 * is against the end of the buffer used to hold the uncompressed kernel
325 * image (VO) and the execution environment (.bss, .brk), which makes sure
326 * there is room to do the in-place decompression. (See header.S for the
327 * calculations.)
328 *
329 * |-----compressed kernel image------|
330 * V V
331 * 0 extract_offset +INIT_SIZE
332 * |-----------|---------------|-------------------------|--------|
333 * | | | |
334 * VO__text startup_32 of ZO VO__end ZO__end
335 * ^ ^
336 * |-------uncompressed kernel image---------|
337 *
338 */
339asmlinkage __visible void *extract_kernel(void *rmode, memptr heap,
340 unsigned char *input_data,
341 unsigned long input_len,
342 unsigned char *output,
343 unsigned long output_len)
344{
345 const unsigned long kernel_total_size = VO__end - VO__text;
346 unsigned long virt_addr = LOAD_PHYSICAL_ADDR;
347
348 /* Retain x86 boot parameters pointer passed from startup_32/64. */
349 boot_params = rmode;
350
351 /* Clear flags intended for solely in-kernel use. */
352 boot_params->hdr.loadflags &= ~KASLR_FLAG;
353
354 sanitize_boot_params(boot_params);
355
356 if (boot_params->screen_info.orig_video_mode == 7) {
357 vidmem = (char *) 0xb0000;
358 vidport = 0x3b4;
359 } else {
360 vidmem = (char *) 0xb8000;
361 vidport = 0x3d4;
362 }
363
364 lines = boot_params->screen_info.orig_video_lines;
365 cols = boot_params->screen_info.orig_video_cols;
366
367 console_init();
368 debug_putstr("early console in extract_kernel\n");
369
370 free_mem_ptr = heap; /* Heap */
371 free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
372
373 /* Report initial kernel position details. */
374 debug_putaddr(input_data);
375 debug_putaddr(input_len);
376 debug_putaddr(output);
377 debug_putaddr(output_len);
378 debug_putaddr(kernel_total_size);
379
380#ifdef CONFIG_X86_64
381 /* Report address of 32-bit trampoline */
382 debug_putaddr(trampoline_32bit);
383#endif
384
385 /*
386 * The memory hole needed for the kernel is the larger of either
387 * the entire decompressed kernel plus relocation table, or the
388 * entire decompressed kernel plus .bss and .brk sections.
389 */
390 choose_random_location((unsigned long)input_data, input_len,
391 (unsigned long *)&output,
392 max(output_len, kernel_total_size),
393 &virt_addr);
394
395 /* Validate memory location choices. */
396 if ((unsigned long)output & (MIN_KERNEL_ALIGN - 1))
397 error("Destination physical address inappropriately aligned");
398 if (virt_addr & (MIN_KERNEL_ALIGN - 1))
399 error("Destination virtual address inappropriately aligned");
400#ifdef CONFIG_X86_64
401 if (heap > 0x3fffffffffffUL)
402 error("Destination address too large");
403 if (virt_addr + max(output_len, kernel_total_size) > KERNEL_IMAGE_SIZE)
404 error("Destination virtual address is beyond the kernel mapping area");
405#else
406 if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff))
407 error("Destination address too large");
408#endif
409#ifndef CONFIG_RELOCATABLE
410 if ((unsigned long)output != LOAD_PHYSICAL_ADDR)
411 error("Destination address does not match LOAD_PHYSICAL_ADDR");
412 if (virt_addr != LOAD_PHYSICAL_ADDR)
413 error("Destination virtual address changed when not relocatable");
414#endif
415
416 debug_putstr("\nDecompressing Linux... ");
417 __decompress(input_data, input_len, NULL, NULL, output, output_len,
418 NULL, error);
419 parse_elf(output);
420 handle_relocations(output, output_len, virt_addr);
421 debug_putstr("done.\nBooting the kernel.\n");
422 return output;
423}
424
425void fortify_panic(const char *name)
426{
427 error("detected buffer overflow");
428}