Loading...
1/* SPDX-License-Identifier: GPL-2.0-or-later */
2/*
3 * (C) Copyright 2007
4 * Texas Instruments
5 * Karthik Dasu <karthik-dp@ti.com>
6 *
7 * (C) Copyright 2004
8 * Texas Instruments, <www.ti.com>
9 * Richard Woodruff <r-woodruff2@ti.com>
10 */
11#include <linux/linkage.h>
12
13#include <asm/assembler.h>
14
15#include "omap34xx.h"
16#include "iomap.h"
17#include "cm3xxx.h"
18#include "prm3xxx.h"
19#include "sdrc.h"
20#include "sram.h"
21#include "control.h"
22
23/*
24 * Registers access definitions
25 */
26#define SDRC_SCRATCHPAD_SEM_OFFS 0xc
27#define SDRC_SCRATCHPAD_SEM_V OMAP343X_SCRATCHPAD_REGADDR\
28 (SDRC_SCRATCHPAD_SEM_OFFS)
29#define PM_PREPWSTST_CORE_P OMAP3430_PRM_BASE + CORE_MOD +\
30 OMAP3430_PM_PREPWSTST
31#define PM_PWSTCTRL_MPU_P OMAP3430_PRM_BASE + MPU_MOD + OMAP2_PM_PWSTCTRL
32#define CM_IDLEST1_CORE_V OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST1)
33#define CM_IDLEST_CKGEN_V OMAP34XX_CM_REGADDR(PLL_MOD, CM_IDLEST)
34#define SRAM_BASE_P OMAP3_SRAM_PA
35#define CONTROL_STAT OMAP343X_CTRL_BASE + OMAP343X_CONTROL_STATUS
36#define CONTROL_MEM_RTA_CTRL (OMAP343X_CTRL_BASE +\
37 OMAP36XX_CONTROL_MEM_RTA_CTRL)
38
39/* Move this as correct place is available */
40#define SCRATCHPAD_MEM_OFFS 0x310
41#define SCRATCHPAD_BASE_P (OMAP343X_CTRL_BASE +\
42 OMAP343X_CONTROL_MEM_WKUP +\
43 SCRATCHPAD_MEM_OFFS)
44#define SDRC_POWER_V OMAP34XX_SDRC_REGADDR(SDRC_POWER)
45#define SDRC_SYSCONFIG_P (OMAP343X_SDRC_BASE + SDRC_SYSCONFIG)
46#define SDRC_MR_0_P (OMAP343X_SDRC_BASE + SDRC_MR_0)
47#define SDRC_EMR2_0_P (OMAP343X_SDRC_BASE + SDRC_EMR2_0)
48#define SDRC_MANUAL_0_P (OMAP343X_SDRC_BASE + SDRC_MANUAL_0)
49#define SDRC_MR_1_P (OMAP343X_SDRC_BASE + SDRC_MR_1)
50#define SDRC_EMR2_1_P (OMAP343X_SDRC_BASE + SDRC_EMR2_1)
51#define SDRC_MANUAL_1_P (OMAP343X_SDRC_BASE + SDRC_MANUAL_1)
52#define SDRC_DLLA_STATUS_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
53#define SDRC_DLLA_CTRL_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
54
55/*
56 * This file needs be built unconditionally as ARM to interoperate correctly
57 * with non-Thumb-2-capable firmware.
58 */
59 .arm
60
61/*
62 * API functions
63 */
64
65 .text
66/*
67 * L2 cache needs to be toggled for stable OFF mode functionality on 3630.
68 * This function sets up a flag that will allow for this toggling to take
69 * place on 3630. Hopefully some version in the future may not need this.
70 */
71ENTRY(enable_omap3630_toggle_l2_on_restore)
72 stmfd sp!, {lr} @ save registers on stack
73 /* Setup so that we will disable and enable l2 */
74 mov r1, #0x1
75 adr r3, l2dis_3630_offset
76 ldr r2, [r3] @ value for offset
77 str r1, [r2, r3] @ write to l2dis_3630
78 ldmfd sp!, {pc} @ restore regs and return
79ENDPROC(enable_omap3630_toggle_l2_on_restore)
80
81/*
82 * Function to call rom code to save secure ram context.
83 *
84 * r0 = physical address of the parameters
85 */
86 .arch armv7-a
87 .arch_extension sec
88ENTRY(save_secure_ram_context)
89 stmfd sp!, {r4 - r11, lr} @ save registers on stack
90 mov r3, r0 @ physical address of parameters
91 mov r0, #25 @ set service ID for PPA
92 mov r12, r0 @ copy secure service ID in r12
93 mov r1, #0 @ set task id for ROM code in r1
94 mov r2, #4 @ set some flags in r2, r6
95 mov r6, #0xff
96 dsb @ data write barrier
97 dmb @ data memory barrier
98 smc #1 @ call SMI monitor (smi #1)
99 nop
100 nop
101 nop
102 nop
103 ldmfd sp!, {r4 - r11, pc}
104ENDPROC(save_secure_ram_context)
105
106/*
107 * ======================
108 * == Idle entry point ==
109 * ======================
110 */
111
112/*
113 * Forces OMAP into idle state
114 *
115 * omap34xx_cpu_suspend() - This bit of code saves the CPU context if needed
116 * and executes the WFI instruction. Calling WFI effectively changes the
117 * power domains states to the desired target power states.
118 *
119 *
120 * Notes:
121 * - only the minimum set of functions gets copied to internal SRAM at boot
122 * and after wake-up from OFF mode, cf. omap_push_sram_idle. The function
123 * pointers in SDRAM or SRAM are called depending on the desired low power
124 * target state.
125 * - when the OMAP wakes up it continues at different execution points
126 * depending on the low power mode (non-OFF vs OFF modes),
127 * cf. 'Resume path for xxx mode' comments.
128 */
129 .align 3
130ENTRY(omap34xx_cpu_suspend)
131 stmfd sp!, {r4 - r11, lr} @ save registers on stack
132
133 /*
134 * r0 contains information about saving context:
135 * 0 - No context lost
136 * 1 - Only L1 and logic lost
137 * 2 - Only L2 lost (Even L1 is retained we clean it along with L2)
138 * 3 - Both L1 and L2 lost and logic lost
139 */
140
141 /*
142 * For OFF mode: save context and jump to WFI in SDRAM (omap3_do_wfi)
143 * For non-OFF modes: jump to the WFI code in SRAM (omap3_do_wfi_sram)
144 */
145 ldr r4, omap3_do_wfi_sram_addr
146 ldr r5, [r4]
147 cmp r0, #0x0 @ If no context save required,
148 bxeq r5 @ jump to the WFI code in SRAM
149
150
151 /* Otherwise fall through to the save context code */
152save_context_wfi:
153 /*
154 * jump out to kernel flush routine
155 * - reuse that code is better
156 * - it executes in a cached space so is faster than refetch per-block
157 * - should be faster and will change with kernel
158 * - 'might' have to copy address, load and jump to it
159 * Flush all data from the L1 data cache before disabling
160 * SCTLR.C bit.
161 */
162 ldr r1, kernel_flush
163 mov lr, pc
164 bx r1
165
166 /*
167 * Clear the SCTLR.C bit to prevent further data cache
168 * allocation. Clearing SCTLR.C would make all the data accesses
169 * strongly ordered and would not hit the cache.
170 */
171 mrc p15, 0, r0, c1, c0, 0
172 bic r0, r0, #(1 << 2) @ Disable the C bit
173 mcr p15, 0, r0, c1, c0, 0
174 isb
175
176 /*
177 * Invalidate L1 data cache. Even though only invalidate is
178 * necessary exported flush API is used here. Doing clean
179 * on already clean cache would be almost NOP.
180 */
181 ldr r1, kernel_flush
182 blx r1
183 b omap3_do_wfi
184ENDPROC(omap34xx_cpu_suspend)
185omap3_do_wfi_sram_addr:
186 .word omap3_do_wfi_sram
187kernel_flush:
188 .word v7_flush_dcache_all
189
190/* ===================================
191 * == WFI instruction => Enter idle ==
192 * ===================================
193 */
194
195/*
196 * Do WFI instruction
197 * Includes the resume path for non-OFF modes
198 *
199 * This code gets copied to internal SRAM and is accessible
200 * from both SDRAM and SRAM:
201 * - executed from SRAM for non-off modes (omap3_do_wfi_sram),
202 * - executed from SDRAM for OFF mode (omap3_do_wfi).
203 */
204 .align 3
205ENTRY(omap3_do_wfi)
206 ldr r4, sdrc_power @ read the SDRC_POWER register
207 ldr r5, [r4] @ read the contents of SDRC_POWER
208 orr r5, r5, #0x40 @ enable self refresh on idle req
209 str r5, [r4] @ write back to SDRC_POWER register
210
211 /* Data memory barrier and Data sync barrier */
212 dsb
213 dmb
214
215/*
216 * ===================================
217 * == WFI instruction => Enter idle ==
218 * ===================================
219 */
220 wfi @ wait for interrupt
221
222/*
223 * ===================================
224 * == Resume path for non-OFF modes ==
225 * ===================================
226 */
227 nop
228 nop
229 nop
230 nop
231 nop
232 nop
233 nop
234 nop
235 nop
236 nop
237
238/*
239 * This function implements the erratum ID i581 WA:
240 * SDRC state restore before accessing the SDRAM
241 *
242 * Only used at return from non-OFF mode. For OFF
243 * mode the ROM code configures the SDRC and
244 * the DPLL before calling the restore code directly
245 * from DDR.
246 */
247
248/* Make sure SDRC accesses are ok */
249wait_sdrc_ok:
250
251/* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures this */
252 ldr r4, cm_idlest_ckgen
253wait_dpll3_lock:
254 ldr r5, [r4]
255 tst r5, #1
256 beq wait_dpll3_lock
257
258 ldr r4, cm_idlest1_core
259wait_sdrc_ready:
260 ldr r5, [r4]
261 tst r5, #0x2
262 bne wait_sdrc_ready
263 /* allow DLL powerdown upon hw idle req */
264 ldr r4, sdrc_power
265 ldr r5, [r4]
266 bic r5, r5, #0x40
267 str r5, [r4]
268
269is_dll_in_lock_mode:
270 /* Is dll in lock mode? */
271 ldr r4, sdrc_dlla_ctrl
272 ldr r5, [r4]
273 tst r5, #0x4
274 bne exit_nonoff_modes @ Return if locked
275 /* wait till dll locks */
276wait_dll_lock_timed:
277 ldr r4, sdrc_dlla_status
278 /* Wait 20uS for lock */
279 mov r6, #8
280wait_dll_lock:
281 subs r6, r6, #0x1
282 beq kick_dll
283 ldr r5, [r4]
284 and r5, r5, #0x4
285 cmp r5, #0x4
286 bne wait_dll_lock
287 b exit_nonoff_modes @ Return when locked
288
289 /* disable/reenable DLL if not locked */
290kick_dll:
291 ldr r4, sdrc_dlla_ctrl
292 ldr r5, [r4]
293 mov r6, r5
294 bic r6, #(1<<3) @ disable dll
295 str r6, [r4]
296 dsb
297 orr r6, r6, #(1<<3) @ enable dll
298 str r6, [r4]
299 dsb
300 b wait_dll_lock_timed
301
302exit_nonoff_modes:
303 /* Re-enable C-bit if needed */
304 mrc p15, 0, r0, c1, c0, 0
305 tst r0, #(1 << 2) @ Check C bit enabled?
306 orreq r0, r0, #(1 << 2) @ Enable the C bit if cleared
307 mcreq p15, 0, r0, c1, c0, 0
308 isb
309
310/*
311 * ===================================
312 * == Exit point from non-OFF modes ==
313 * ===================================
314 */
315 ldmfd sp!, {r4 - r11, pc} @ restore regs and return
316ENDPROC(omap3_do_wfi)
317sdrc_power:
318 .word SDRC_POWER_V
319cm_idlest1_core:
320 .word CM_IDLEST1_CORE_V
321cm_idlest_ckgen:
322 .word CM_IDLEST_CKGEN_V
323sdrc_dlla_status:
324 .word SDRC_DLLA_STATUS_V
325sdrc_dlla_ctrl:
326 .word SDRC_DLLA_CTRL_V
327ENTRY(omap3_do_wfi_sz)
328 .word . - omap3_do_wfi
329
330
331/*
332 * ==============================
333 * == Resume path for OFF mode ==
334 * ==============================
335 */
336
337/*
338 * The restore_* functions are called by the ROM code
339 * when back from WFI in OFF mode.
340 * Cf. the get_*restore_pointer functions.
341 *
342 * restore_es3: applies to 34xx >= ES3.0
343 * restore_3630: applies to 36xx
344 * restore: common code for 3xxx
345 *
346 * Note: when back from CORE and MPU OFF mode we are running
347 * from SDRAM, without MMU, without the caches and prediction.
348 * Also the SRAM content has been cleared.
349 */
350ENTRY(omap3_restore_es3)
351 ldr r5, pm_prepwstst_core_p
352 ldr r4, [r5]
353 and r4, r4, #0x3
354 cmp r4, #0x0 @ Check if previous power state of CORE is OFF
355 bne omap3_restore @ Fall through to OMAP3 common code
356 adr r0, es3_sdrc_fix
357 ldr r1, sram_base
358 ldr r2, es3_sdrc_fix_sz
359 mov r2, r2, ror #2
360copy_to_sram:
361 ldmia r0!, {r3} @ val = *src
362 stmia r1!, {r3} @ *dst = val
363 subs r2, r2, #0x1 @ num_words--
364 bne copy_to_sram
365 ldr r1, sram_base
366 blx r1
367 b omap3_restore @ Fall through to OMAP3 common code
368ENDPROC(omap3_restore_es3)
369
370ENTRY(omap3_restore_3630)
371 ldr r1, pm_prepwstst_core_p
372 ldr r2, [r1]
373 and r2, r2, #0x3
374 cmp r2, #0x0 @ Check if previous power state of CORE is OFF
375 bne omap3_restore @ Fall through to OMAP3 common code
376 /* Disable RTA before giving control */
377 ldr r1, control_mem_rta
378 mov r2, #OMAP36XX_RTA_DISABLE
379 str r2, [r1]
380ENDPROC(omap3_restore_3630)
381
382 /* Fall through to common code for the remaining logic */
383
384ENTRY(omap3_restore)
385 /*
386 * Read the pwstctrl register to check the reason for mpu reset.
387 * This tells us what was lost.
388 */
389 ldr r1, pm_pwstctrl_mpu
390 ldr r2, [r1]
391 and r2, r2, #0x3
392 cmp r2, #0x0 @ Check if target power state was OFF or RET
393 bne logic_l1_restore
394
395 adr r1, l2dis_3630_offset @ address for offset
396 ldr r0, [r1] @ value for offset
397 ldr r0, [r1, r0] @ value at l2dis_3630
398 cmp r0, #0x1 @ should we disable L2 on 3630?
399 bne skipl2dis
400 mrc p15, 0, r0, c1, c0, 1
401 bic r0, r0, #2 @ disable L2 cache
402 mcr p15, 0, r0, c1, c0, 1
403skipl2dis:
404 ldr r0, control_stat
405 ldr r1, [r0]
406 and r1, #0x700
407 cmp r1, #0x300
408 beq l2_inv_gp
409 adr r0, l2_inv_api_params_offset
410 ldr r3, [r0]
411 add r3, r3, r0 @ r3 points to dummy parameters
412 mov r0, #40 @ set service ID for PPA
413 mov r12, r0 @ copy secure Service ID in r12
414 mov r1, #0 @ set task id for ROM code in r1
415 mov r2, #4 @ set some flags in r2, r6
416 mov r6, #0xff
417 dsb @ data write barrier
418 dmb @ data memory barrier
419 smc #1 @ call SMI monitor (smi #1)
420 /* Write to Aux control register to set some bits */
421 mov r0, #42 @ set service ID for PPA
422 mov r12, r0 @ copy secure Service ID in r12
423 mov r1, #0 @ set task id for ROM code in r1
424 mov r2, #4 @ set some flags in r2, r6
425 mov r6, #0xff
426 ldr r4, scratchpad_base
427 ldr r3, [r4, #0xBC] @ r3 points to parameters
428 dsb @ data write barrier
429 dmb @ data memory barrier
430 smc #1 @ call SMI monitor (smi #1)
431
432#ifdef CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE
433 /* Restore L2 aux control register */
434 @ set service ID for PPA
435 mov r0, #CONFIG_OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
436 mov r12, r0 @ copy service ID in r12
437 mov r1, #0 @ set task ID for ROM code in r1
438 mov r2, #4 @ set some flags in r2, r6
439 mov r6, #0xff
440 ldr r4, scratchpad_base
441 ldr r3, [r4, #0xBC]
442 adds r3, r3, #8 @ r3 points to parameters
443 dsb @ data write barrier
444 dmb @ data memory barrier
445 smc #1 @ call SMI monitor (smi #1)
446#endif
447 b logic_l1_restore
448
449 .align
450l2_inv_api_params_offset:
451 .long l2_inv_api_params - .
452l2_inv_gp:
453 /* Execute smi to invalidate L2 cache */
454 mov r12, #0x1 @ set up to invalidate L2
455 smc #0 @ Call SMI monitor (smieq)
456 /* Write to Aux control register to set some bits */
457 ldr r4, scratchpad_base
458 ldr r3, [r4,#0xBC]
459 ldr r0, [r3,#4]
460 mov r12, #0x3
461 smc #0 @ Call SMI monitor (smieq)
462 ldr r4, scratchpad_base
463 ldr r3, [r4,#0xBC]
464 ldr r0, [r3,#12]
465 mov r12, #0x2
466 smc #0 @ Call SMI monitor (smieq)
467logic_l1_restore:
468 adr r0, l2dis_3630_offset @ address for offset
469 ldr r1, [r0] @ value for offset
470 ldr r1, [r0, r1] @ value at l2dis_3630
471 cmp r1, #0x1 @ Test if L2 re-enable needed on 3630
472 bne skipl2reen
473 mrc p15, 0, r1, c1, c0, 1
474 orr r1, r1, #2 @ re-enable L2 cache
475 mcr p15, 0, r1, c1, c0, 1
476skipl2reen:
477
478 /* Now branch to the common CPU resume function */
479 b cpu_resume
480ENDPROC(omap3_restore)
481
482 .ltorg
483
484/*
485 * Local variables
486 */
487pm_prepwstst_core_p:
488 .word PM_PREPWSTST_CORE_P
489pm_pwstctrl_mpu:
490 .word PM_PWSTCTRL_MPU_P
491scratchpad_base:
492 .word SCRATCHPAD_BASE_P
493sram_base:
494 .word SRAM_BASE_P + 0x8000
495control_stat:
496 .word CONTROL_STAT
497control_mem_rta:
498 .word CONTROL_MEM_RTA_CTRL
499l2dis_3630_offset:
500 .long l2dis_3630 - .
501
502 .data
503 .align 2
504l2dis_3630:
505 .word 0
506
507 .data
508 .align 2
509l2_inv_api_params:
510 .word 0x1, 0x00
511
512/*
513 * Internal functions
514 */
515
516/*
517 * This function implements the erratum ID i443 WA, applies to 34xx >= ES3.0
518 * Copied to and run from SRAM in order to reconfigure the SDRC parameters.
519 */
520 .text
521 .align 3
522ENTRY(es3_sdrc_fix)
523 ldr r4, sdrc_syscfg @ get config addr
524 ldr r5, [r4] @ get value
525 tst r5, #0x100 @ is part access blocked
526 it eq
527 biceq r5, r5, #0x100 @ clear bit if set
528 str r5, [r4] @ write back change
529 ldr r4, sdrc_mr_0 @ get config addr
530 ldr r5, [r4] @ get value
531 str r5, [r4] @ write back change
532 ldr r4, sdrc_emr2_0 @ get config addr
533 ldr r5, [r4] @ get value
534 str r5, [r4] @ write back change
535 ldr r4, sdrc_manual_0 @ get config addr
536 mov r5, #0x2 @ autorefresh command
537 str r5, [r4] @ kick off refreshes
538 ldr r4, sdrc_mr_1 @ get config addr
539 ldr r5, [r4] @ get value
540 str r5, [r4] @ write back change
541 ldr r4, sdrc_emr2_1 @ get config addr
542 ldr r5, [r4] @ get value
543 str r5, [r4] @ write back change
544 ldr r4, sdrc_manual_1 @ get config addr
545 mov r5, #0x2 @ autorefresh command
546 str r5, [r4] @ kick off refreshes
547 bx lr
548
549/*
550 * Local variables
551 */
552 .align
553sdrc_syscfg:
554 .word SDRC_SYSCONFIG_P
555sdrc_mr_0:
556 .word SDRC_MR_0_P
557sdrc_emr2_0:
558 .word SDRC_EMR2_0_P
559sdrc_manual_0:
560 .word SDRC_MANUAL_0_P
561sdrc_mr_1:
562 .word SDRC_MR_1_P
563sdrc_emr2_1:
564 .word SDRC_EMR2_1_P
565sdrc_manual_1:
566 .word SDRC_MANUAL_1_P
567ENDPROC(es3_sdrc_fix)
568ENTRY(es3_sdrc_fix_sz)
569 .word . - es3_sdrc_fix
1/*
2 * (C) Copyright 2007
3 * Texas Instruments
4 * Karthik Dasu <karthik-dp@ti.com>
5 *
6 * (C) Copyright 2004
7 * Texas Instruments, <www.ti.com>
8 * Richard Woodruff <r-woodruff2@ti.com>
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of
13 * the License, or (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23 * MA 02111-1307 USA
24 */
25#include <linux/linkage.h>
26
27#include <asm/assembler.h>
28
29#include "omap34xx.h"
30#include "iomap.h"
31#include "cm3xxx.h"
32#include "prm3xxx.h"
33#include "sdrc.h"
34#include "sram.h"
35#include "control.h"
36
37/*
38 * Registers access definitions
39 */
40#define SDRC_SCRATCHPAD_SEM_OFFS 0xc
41#define SDRC_SCRATCHPAD_SEM_V OMAP343X_SCRATCHPAD_REGADDR\
42 (SDRC_SCRATCHPAD_SEM_OFFS)
43#define PM_PREPWSTST_CORE_P OMAP3430_PRM_BASE + CORE_MOD +\
44 OMAP3430_PM_PREPWSTST
45#define PM_PWSTCTRL_MPU_P OMAP3430_PRM_BASE + MPU_MOD + OMAP2_PM_PWSTCTRL
46#define CM_IDLEST1_CORE_V OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST1)
47#define CM_IDLEST_CKGEN_V OMAP34XX_CM_REGADDR(PLL_MOD, CM_IDLEST)
48#define SRAM_BASE_P OMAP3_SRAM_PA
49#define CONTROL_STAT OMAP343X_CTRL_BASE + OMAP343X_CONTROL_STATUS
50#define CONTROL_MEM_RTA_CTRL (OMAP343X_CTRL_BASE +\
51 OMAP36XX_CONTROL_MEM_RTA_CTRL)
52
53/* Move this as correct place is available */
54#define SCRATCHPAD_MEM_OFFS 0x310
55#define SCRATCHPAD_BASE_P (OMAP343X_CTRL_BASE +\
56 OMAP343X_CONTROL_MEM_WKUP +\
57 SCRATCHPAD_MEM_OFFS)
58#define SDRC_POWER_V OMAP34XX_SDRC_REGADDR(SDRC_POWER)
59#define SDRC_SYSCONFIG_P (OMAP343X_SDRC_BASE + SDRC_SYSCONFIG)
60#define SDRC_MR_0_P (OMAP343X_SDRC_BASE + SDRC_MR_0)
61#define SDRC_EMR2_0_P (OMAP343X_SDRC_BASE + SDRC_EMR2_0)
62#define SDRC_MANUAL_0_P (OMAP343X_SDRC_BASE + SDRC_MANUAL_0)
63#define SDRC_MR_1_P (OMAP343X_SDRC_BASE + SDRC_MR_1)
64#define SDRC_EMR2_1_P (OMAP343X_SDRC_BASE + SDRC_EMR2_1)
65#define SDRC_MANUAL_1_P (OMAP343X_SDRC_BASE + SDRC_MANUAL_1)
66#define SDRC_DLLA_STATUS_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
67#define SDRC_DLLA_CTRL_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
68
69/*
70 * This file needs be built unconditionally as ARM to interoperate correctly
71 * with non-Thumb-2-capable firmware.
72 */
73 .arm
74
75/*
76 * API functions
77 */
78
79 .text
80/*
81 * L2 cache needs to be toggled for stable OFF mode functionality on 3630.
82 * This function sets up a flag that will allow for this toggling to take
83 * place on 3630. Hopefully some version in the future may not need this.
84 */
85ENTRY(enable_omap3630_toggle_l2_on_restore)
86 stmfd sp!, {lr} @ save registers on stack
87 /* Setup so that we will disable and enable l2 */
88 mov r1, #0x1
89 adrl r3, l2dis_3630_offset @ may be too distant for plain adr
90 ldr r2, [r3] @ value for offset
91 str r1, [r2, r3] @ write to l2dis_3630
92 ldmfd sp!, {pc} @ restore regs and return
93ENDPROC(enable_omap3630_toggle_l2_on_restore)
94
95/*
96 * Function to call rom code to save secure ram context.
97 *
98 * r0 = physical address of the parameters
99 */
100ENTRY(save_secure_ram_context)
101 stmfd sp!, {r4 - r11, lr} @ save registers on stack
102 mov r3, r0 @ physical address of parameters
103 mov r0, #25 @ set service ID for PPA
104 mov r12, r0 @ copy secure service ID in r12
105 mov r1, #0 @ set task id for ROM code in r1
106 mov r2, #4 @ set some flags in r2, r6
107 mov r6, #0xff
108 dsb @ data write barrier
109 dmb @ data memory barrier
110 smc #1 @ call SMI monitor (smi #1)
111 nop
112 nop
113 nop
114 nop
115 ldmfd sp!, {r4 - r11, pc}
116ENDPROC(save_secure_ram_context)
117
118/*
119 * ======================
120 * == Idle entry point ==
121 * ======================
122 */
123
124/*
125 * Forces OMAP into idle state
126 *
127 * omap34xx_cpu_suspend() - This bit of code saves the CPU context if needed
128 * and executes the WFI instruction. Calling WFI effectively changes the
129 * power domains states to the desired target power states.
130 *
131 *
132 * Notes:
133 * - only the minimum set of functions gets copied to internal SRAM at boot
134 * and after wake-up from OFF mode, cf. omap_push_sram_idle. The function
135 * pointers in SDRAM or SRAM are called depending on the desired low power
136 * target state.
137 * - when the OMAP wakes up it continues at different execution points
138 * depending on the low power mode (non-OFF vs OFF modes),
139 * cf. 'Resume path for xxx mode' comments.
140 */
141 .align 3
142ENTRY(omap34xx_cpu_suspend)
143 stmfd sp!, {r4 - r11, lr} @ save registers on stack
144
145 /*
146 * r0 contains information about saving context:
147 * 0 - No context lost
148 * 1 - Only L1 and logic lost
149 * 2 - Only L2 lost (Even L1 is retained we clean it along with L2)
150 * 3 - Both L1 and L2 lost and logic lost
151 */
152
153 /*
154 * For OFF mode: save context and jump to WFI in SDRAM (omap3_do_wfi)
155 * For non-OFF modes: jump to the WFI code in SRAM (omap3_do_wfi_sram)
156 */
157 ldr r4, omap3_do_wfi_sram_addr
158 ldr r5, [r4]
159 cmp r0, #0x0 @ If no context save required,
160 bxeq r5 @ jump to the WFI code in SRAM
161
162
163 /* Otherwise fall through to the save context code */
164save_context_wfi:
165 /*
166 * jump out to kernel flush routine
167 * - reuse that code is better
168 * - it executes in a cached space so is faster than refetch per-block
169 * - should be faster and will change with kernel
170 * - 'might' have to copy address, load and jump to it
171 * Flush all data from the L1 data cache before disabling
172 * SCTLR.C bit.
173 */
174 ldr r1, kernel_flush
175 mov lr, pc
176 bx r1
177
178 /*
179 * Clear the SCTLR.C bit to prevent further data cache
180 * allocation. Clearing SCTLR.C would make all the data accesses
181 * strongly ordered and would not hit the cache.
182 */
183 mrc p15, 0, r0, c1, c0, 0
184 bic r0, r0, #(1 << 2) @ Disable the C bit
185 mcr p15, 0, r0, c1, c0, 0
186 isb
187
188 /*
189 * Invalidate L1 data cache. Even though only invalidate is
190 * necessary exported flush API is used here. Doing clean
191 * on already clean cache would be almost NOP.
192 */
193 ldr r1, kernel_flush
194 blx r1
195 b omap3_do_wfi
196ENDPROC(omap34xx_cpu_suspend)
197omap3_do_wfi_sram_addr:
198 .word omap3_do_wfi_sram
199kernel_flush:
200 .word v7_flush_dcache_all
201
202/* ===================================
203 * == WFI instruction => Enter idle ==
204 * ===================================
205 */
206
207/*
208 * Do WFI instruction
209 * Includes the resume path for non-OFF modes
210 *
211 * This code gets copied to internal SRAM and is accessible
212 * from both SDRAM and SRAM:
213 * - executed from SRAM for non-off modes (omap3_do_wfi_sram),
214 * - executed from SDRAM for OFF mode (omap3_do_wfi).
215 */
216 .align 3
217ENTRY(omap3_do_wfi)
218 ldr r4, sdrc_power @ read the SDRC_POWER register
219 ldr r5, [r4] @ read the contents of SDRC_POWER
220 orr r5, r5, #0x40 @ enable self refresh on idle req
221 str r5, [r4] @ write back to SDRC_POWER register
222
223 /* Data memory barrier and Data sync barrier */
224 dsb
225 dmb
226
227/*
228 * ===================================
229 * == WFI instruction => Enter idle ==
230 * ===================================
231 */
232 wfi @ wait for interrupt
233
234/*
235 * ===================================
236 * == Resume path for non-OFF modes ==
237 * ===================================
238 */
239 nop
240 nop
241 nop
242 nop
243 nop
244 nop
245 nop
246 nop
247 nop
248 nop
249
250/*
251 * This function implements the erratum ID i581 WA:
252 * SDRC state restore before accessing the SDRAM
253 *
254 * Only used at return from non-OFF mode. For OFF
255 * mode the ROM code configures the SDRC and
256 * the DPLL before calling the restore code directly
257 * from DDR.
258 */
259
260/* Make sure SDRC accesses are ok */
261wait_sdrc_ok:
262
263/* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures this */
264 ldr r4, cm_idlest_ckgen
265wait_dpll3_lock:
266 ldr r5, [r4]
267 tst r5, #1
268 beq wait_dpll3_lock
269
270 ldr r4, cm_idlest1_core
271wait_sdrc_ready:
272 ldr r5, [r4]
273 tst r5, #0x2
274 bne wait_sdrc_ready
275 /* allow DLL powerdown upon hw idle req */
276 ldr r4, sdrc_power
277 ldr r5, [r4]
278 bic r5, r5, #0x40
279 str r5, [r4]
280
281is_dll_in_lock_mode:
282 /* Is dll in lock mode? */
283 ldr r4, sdrc_dlla_ctrl
284 ldr r5, [r4]
285 tst r5, #0x4
286 bne exit_nonoff_modes @ Return if locked
287 /* wait till dll locks */
288wait_dll_lock_timed:
289 ldr r4, sdrc_dlla_status
290 /* Wait 20uS for lock */
291 mov r6, #8
292wait_dll_lock:
293 subs r6, r6, #0x1
294 beq kick_dll
295 ldr r5, [r4]
296 and r5, r5, #0x4
297 cmp r5, #0x4
298 bne wait_dll_lock
299 b exit_nonoff_modes @ Return when locked
300
301 /* disable/reenable DLL if not locked */
302kick_dll:
303 ldr r4, sdrc_dlla_ctrl
304 ldr r5, [r4]
305 mov r6, r5
306 bic r6, #(1<<3) @ disable dll
307 str r6, [r4]
308 dsb
309 orr r6, r6, #(1<<3) @ enable dll
310 str r6, [r4]
311 dsb
312 b wait_dll_lock_timed
313
314exit_nonoff_modes:
315 /* Re-enable C-bit if needed */
316 mrc p15, 0, r0, c1, c0, 0
317 tst r0, #(1 << 2) @ Check C bit enabled?
318 orreq r0, r0, #(1 << 2) @ Enable the C bit if cleared
319 mcreq p15, 0, r0, c1, c0, 0
320 isb
321
322/*
323 * ===================================
324 * == Exit point from non-OFF modes ==
325 * ===================================
326 */
327 ldmfd sp!, {r4 - r11, pc} @ restore regs and return
328ENDPROC(omap3_do_wfi)
329sdrc_power:
330 .word SDRC_POWER_V
331cm_idlest1_core:
332 .word CM_IDLEST1_CORE_V
333cm_idlest_ckgen:
334 .word CM_IDLEST_CKGEN_V
335sdrc_dlla_status:
336 .word SDRC_DLLA_STATUS_V
337sdrc_dlla_ctrl:
338 .word SDRC_DLLA_CTRL_V
339ENTRY(omap3_do_wfi_sz)
340 .word . - omap3_do_wfi
341
342
343/*
344 * ==============================
345 * == Resume path for OFF mode ==
346 * ==============================
347 */
348
349/*
350 * The restore_* functions are called by the ROM code
351 * when back from WFI in OFF mode.
352 * Cf. the get_*restore_pointer functions.
353 *
354 * restore_es3: applies to 34xx >= ES3.0
355 * restore_3630: applies to 36xx
356 * restore: common code for 3xxx
357 *
358 * Note: when back from CORE and MPU OFF mode we are running
359 * from SDRAM, without MMU, without the caches and prediction.
360 * Also the SRAM content has been cleared.
361 */
362ENTRY(omap3_restore_es3)
363 ldr r5, pm_prepwstst_core_p
364 ldr r4, [r5]
365 and r4, r4, #0x3
366 cmp r4, #0x0 @ Check if previous power state of CORE is OFF
367 bne omap3_restore @ Fall through to OMAP3 common code
368 adr r0, es3_sdrc_fix
369 ldr r1, sram_base
370 ldr r2, es3_sdrc_fix_sz
371 mov r2, r2, ror #2
372copy_to_sram:
373 ldmia r0!, {r3} @ val = *src
374 stmia r1!, {r3} @ *dst = val
375 subs r2, r2, #0x1 @ num_words--
376 bne copy_to_sram
377 ldr r1, sram_base
378 blx r1
379 b omap3_restore @ Fall through to OMAP3 common code
380ENDPROC(omap3_restore_es3)
381
382ENTRY(omap3_restore_3630)
383 ldr r1, pm_prepwstst_core_p
384 ldr r2, [r1]
385 and r2, r2, #0x3
386 cmp r2, #0x0 @ Check if previous power state of CORE is OFF
387 bne omap3_restore @ Fall through to OMAP3 common code
388 /* Disable RTA before giving control */
389 ldr r1, control_mem_rta
390 mov r2, #OMAP36XX_RTA_DISABLE
391 str r2, [r1]
392ENDPROC(omap3_restore_3630)
393
394 /* Fall through to common code for the remaining logic */
395
396ENTRY(omap3_restore)
397 /*
398 * Read the pwstctrl register to check the reason for mpu reset.
399 * This tells us what was lost.
400 */
401 ldr r1, pm_pwstctrl_mpu
402 ldr r2, [r1]
403 and r2, r2, #0x3
404 cmp r2, #0x0 @ Check if target power state was OFF or RET
405 bne logic_l1_restore
406
407 adr r1, l2dis_3630_offset @ address for offset
408 ldr r0, [r1] @ value for offset
409 ldr r0, [r1, r0] @ value at l2dis_3630
410 cmp r0, #0x1 @ should we disable L2 on 3630?
411 bne skipl2dis
412 mrc p15, 0, r0, c1, c0, 1
413 bic r0, r0, #2 @ disable L2 cache
414 mcr p15, 0, r0, c1, c0, 1
415skipl2dis:
416 ldr r0, control_stat
417 ldr r1, [r0]
418 and r1, #0x700
419 cmp r1, #0x300
420 beq l2_inv_gp
421 adr r0, l2_inv_api_params_offset
422 ldr r3, [r0]
423 add r3, r3, r0 @ r3 points to dummy parameters
424 mov r0, #40 @ set service ID for PPA
425 mov r12, r0 @ copy secure Service ID in r12
426 mov r1, #0 @ set task id for ROM code in r1
427 mov r2, #4 @ set some flags in r2, r6
428 mov r6, #0xff
429 dsb @ data write barrier
430 dmb @ data memory barrier
431 smc #1 @ call SMI monitor (smi #1)
432 /* Write to Aux control register to set some bits */
433 mov r0, #42 @ set service ID for PPA
434 mov r12, r0 @ copy secure Service ID in r12
435 mov r1, #0 @ set task id for ROM code in r1
436 mov r2, #4 @ set some flags in r2, r6
437 mov r6, #0xff
438 ldr r4, scratchpad_base
439 ldr r3, [r4, #0xBC] @ r3 points to parameters
440 dsb @ data write barrier
441 dmb @ data memory barrier
442 smc #1 @ call SMI monitor (smi #1)
443
444#ifdef CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE
445 /* Restore L2 aux control register */
446 @ set service ID for PPA
447 mov r0, #CONFIG_OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
448 mov r12, r0 @ copy service ID in r12
449 mov r1, #0 @ set task ID for ROM code in r1
450 mov r2, #4 @ set some flags in r2, r6
451 mov r6, #0xff
452 ldr r4, scratchpad_base
453 ldr r3, [r4, #0xBC]
454 adds r3, r3, #8 @ r3 points to parameters
455 dsb @ data write barrier
456 dmb @ data memory barrier
457 smc #1 @ call SMI monitor (smi #1)
458#endif
459 b logic_l1_restore
460
461 .align
462l2_inv_api_params_offset:
463 .long l2_inv_api_params - .
464l2_inv_gp:
465 /* Execute smi to invalidate L2 cache */
466 mov r12, #0x1 @ set up to invalidate L2
467 smc #0 @ Call SMI monitor (smieq)
468 /* Write to Aux control register to set some bits */
469 ldr r4, scratchpad_base
470 ldr r3, [r4,#0xBC]
471 ldr r0, [r3,#4]
472 mov r12, #0x3
473 smc #0 @ Call SMI monitor (smieq)
474 ldr r4, scratchpad_base
475 ldr r3, [r4,#0xBC]
476 ldr r0, [r3,#12]
477 mov r12, #0x2
478 smc #0 @ Call SMI monitor (smieq)
479logic_l1_restore:
480 adr r0, l2dis_3630_offset @ adress for offset
481 ldr r1, [r0] @ value for offset
482 ldr r1, [r0, r1] @ value at l2dis_3630
483 cmp r1, #0x1 @ Test if L2 re-enable needed on 3630
484 bne skipl2reen
485 mrc p15, 0, r1, c1, c0, 1
486 orr r1, r1, #2 @ re-enable L2 cache
487 mcr p15, 0, r1, c1, c0, 1
488skipl2reen:
489
490 /* Now branch to the common CPU resume function */
491 b cpu_resume
492ENDPROC(omap3_restore)
493
494 .ltorg
495
496/*
497 * Local variables
498 */
499pm_prepwstst_core_p:
500 .word PM_PREPWSTST_CORE_P
501pm_pwstctrl_mpu:
502 .word PM_PWSTCTRL_MPU_P
503scratchpad_base:
504 .word SCRATCHPAD_BASE_P
505sram_base:
506 .word SRAM_BASE_P + 0x8000
507control_stat:
508 .word CONTROL_STAT
509control_mem_rta:
510 .word CONTROL_MEM_RTA_CTRL
511l2dis_3630_offset:
512 .long l2dis_3630 - .
513
514 .data
515 .align 2
516l2dis_3630:
517 .word 0
518
519 .data
520 .align 2
521l2_inv_api_params:
522 .word 0x1, 0x00
523
524/*
525 * Internal functions
526 */
527
528/*
529 * This function implements the erratum ID i443 WA, applies to 34xx >= ES3.0
530 * Copied to and run from SRAM in order to reconfigure the SDRC parameters.
531 */
532 .text
533 .align 3
534ENTRY(es3_sdrc_fix)
535 ldr r4, sdrc_syscfg @ get config addr
536 ldr r5, [r4] @ get value
537 tst r5, #0x100 @ is part access blocked
538 it eq
539 biceq r5, r5, #0x100 @ clear bit if set
540 str r5, [r4] @ write back change
541 ldr r4, sdrc_mr_0 @ get config addr
542 ldr r5, [r4] @ get value
543 str r5, [r4] @ write back change
544 ldr r4, sdrc_emr2_0 @ get config addr
545 ldr r5, [r4] @ get value
546 str r5, [r4] @ write back change
547 ldr r4, sdrc_manual_0 @ get config addr
548 mov r5, #0x2 @ autorefresh command
549 str r5, [r4] @ kick off refreshes
550 ldr r4, sdrc_mr_1 @ get config addr
551 ldr r5, [r4] @ get value
552 str r5, [r4] @ write back change
553 ldr r4, sdrc_emr2_1 @ get config addr
554 ldr r5, [r4] @ get value
555 str r5, [r4] @ write back change
556 ldr r4, sdrc_manual_1 @ get config addr
557 mov r5, #0x2 @ autorefresh command
558 str r5, [r4] @ kick off refreshes
559 bx lr
560
561/*
562 * Local variables
563 */
564 .align
565sdrc_syscfg:
566 .word SDRC_SYSCONFIG_P
567sdrc_mr_0:
568 .word SDRC_MR_0_P
569sdrc_emr2_0:
570 .word SDRC_EMR2_0_P
571sdrc_manual_0:
572 .word SDRC_MANUAL_0_P
573sdrc_mr_1:
574 .word SDRC_MR_1_P
575sdrc_emr2_1:
576 .word SDRC_EMR2_1_P
577sdrc_manual_1:
578 .word SDRC_MANUAL_1_P
579ENDPROC(es3_sdrc_fix)
580ENTRY(es3_sdrc_fix_sz)
581 .word . - es3_sdrc_fix