Loading...
1/* SPDX-License-Identifier: GPL-2.0-only */
2/*
3 * omap_hwmod macros, structures
4 *
5 * Copyright (C) 2009-2011 Nokia Corporation
6 * Copyright (C) 2011-2012 Texas Instruments, Inc.
7 * Paul Walmsley
8 *
9 * Created in collaboration with (alphabetical order): Benoît Cousson,
10 * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari
11 * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff
12 *
13 * These headers and macros are used to define OMAP on-chip module
14 * data and their integration with other OMAP modules and Linux.
15 * Copious documentation and references can also be found in the
16 * omap_hwmod code, in arch/arm/mach-omap2/omap_hwmod.c (as of this
17 * writing).
18 *
19 * To do:
20 * - add interconnect error log structures
21 * - init_conn_id_bit (CONNID_BIT_VECTOR)
22 * - implement default hwmod SMS/SDRC flags?
23 * - move Linux-specific data ("non-ROM data") out
24 */
25#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
26#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
27
28#include <linux/kernel.h>
29#include <linux/init.h>
30#include <linux/list.h>
31#include <linux/ioport.h>
32#include <linux/spinlock.h>
33
34struct omap_device;
35
36extern struct sysc_regbits omap_hwmod_sysc_type1;
37extern struct sysc_regbits omap_hwmod_sysc_type2;
38extern struct sysc_regbits omap_hwmod_sysc_type3;
39extern struct sysc_regbits omap34xx_sr_sysc_fields;
40extern struct sysc_regbits omap36xx_sr_sysc_fields;
41extern struct sysc_regbits omap3_sham_sysc_fields;
42extern struct sysc_regbits omap3xxx_aes_sysc_fields;
43extern struct sysc_regbits omap_hwmod_sysc_type_mcasp;
44extern struct sysc_regbits omap_hwmod_sysc_type_usb_host_fs;
45
46/*
47 * OCP SYSCONFIG bit shifts/masks TYPE1. These are for IPs compliant
48 * with the original PRCM protocol defined for OMAP2420
49 */
50#define SYSC_TYPE1_MIDLEMODE_SHIFT 12
51#define SYSC_TYPE1_MIDLEMODE_MASK (0x3 << SYSC_TYPE1_MIDLEMODE_SHIFT)
52#define SYSC_TYPE1_CLOCKACTIVITY_SHIFT 8
53#define SYSC_TYPE1_CLOCKACTIVITY_MASK (0x3 << SYSC_TYPE1_CLOCKACTIVITY_SHIFT)
54#define SYSC_TYPE1_SIDLEMODE_SHIFT 3
55#define SYSC_TYPE1_SIDLEMODE_MASK (0x3 << SYSC_TYPE1_SIDLEMODE_SHIFT)
56#define SYSC_TYPE1_ENAWAKEUP_SHIFT 2
57#define SYSC_TYPE1_ENAWAKEUP_MASK (1 << SYSC_TYPE1_ENAWAKEUP_SHIFT)
58#define SYSC_TYPE1_SOFTRESET_SHIFT 1
59#define SYSC_TYPE1_SOFTRESET_MASK (1 << SYSC_TYPE1_SOFTRESET_SHIFT)
60#define SYSC_TYPE1_AUTOIDLE_SHIFT 0
61#define SYSC_TYPE1_AUTOIDLE_MASK (1 << SYSC_TYPE1_AUTOIDLE_SHIFT)
62
63/*
64 * OCP SYSCONFIG bit shifts/masks TYPE2. These are for IPs compliant
65 * with the new PRCM protocol defined for new OMAP4 IPs.
66 */
67#define SYSC_TYPE2_SOFTRESET_SHIFT 0
68#define SYSC_TYPE2_SOFTRESET_MASK (1 << SYSC_TYPE2_SOFTRESET_SHIFT)
69#define SYSC_TYPE2_SIDLEMODE_SHIFT 2
70#define SYSC_TYPE2_SIDLEMODE_MASK (0x3 << SYSC_TYPE2_SIDLEMODE_SHIFT)
71#define SYSC_TYPE2_MIDLEMODE_SHIFT 4
72#define SYSC_TYPE2_MIDLEMODE_MASK (0x3 << SYSC_TYPE2_MIDLEMODE_SHIFT)
73#define SYSC_TYPE2_DMADISABLE_SHIFT 16
74#define SYSC_TYPE2_DMADISABLE_MASK (0x1 << SYSC_TYPE2_DMADISABLE_SHIFT)
75
76/*
77 * OCP SYSCONFIG bit shifts/masks TYPE3.
78 * This is applicable for some IPs present in AM33XX
79 */
80#define SYSC_TYPE3_SIDLEMODE_SHIFT 0
81#define SYSC_TYPE3_SIDLEMODE_MASK (0x3 << SYSC_TYPE3_SIDLEMODE_SHIFT)
82#define SYSC_TYPE3_MIDLEMODE_SHIFT 2
83#define SYSC_TYPE3_MIDLEMODE_MASK (0x3 << SYSC_TYPE3_MIDLEMODE_SHIFT)
84
85/* OCP SYSSTATUS bit shifts/masks */
86#define SYSS_RESETDONE_SHIFT 0
87#define SYSS_RESETDONE_MASK (1 << SYSS_RESETDONE_SHIFT)
88
89/* Master standby/slave idle mode flags */
90#define HWMOD_IDLEMODE_FORCE (1 << 0)
91#define HWMOD_IDLEMODE_NO (1 << 1)
92#define HWMOD_IDLEMODE_SMART (1 << 2)
93#define HWMOD_IDLEMODE_SMART_WKUP (1 << 3)
94
95/* modulemode control type (SW or HW) */
96#define MODULEMODE_HWCTRL 1
97#define MODULEMODE_SWCTRL 2
98
99#define DEBUG_OMAP2UART1_FLAGS 0
100#define DEBUG_OMAP2UART2_FLAGS 0
101#define DEBUG_OMAP2UART3_FLAGS 0
102#define DEBUG_OMAP3UART3_FLAGS 0
103#define DEBUG_OMAP3UART4_FLAGS 0
104#define DEBUG_OMAP4UART3_FLAGS 0
105#define DEBUG_OMAP4UART4_FLAGS 0
106#define DEBUG_TI81XXUART1_FLAGS 0
107#define DEBUG_TI81XXUART2_FLAGS 0
108#define DEBUG_TI81XXUART3_FLAGS 0
109#define DEBUG_AM33XXUART1_FLAGS 0
110
111#define DEBUG_OMAPUART_FLAGS (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET)
112
113#ifdef CONFIG_OMAP_GPMC_DEBUG
114#define DEBUG_OMAP_GPMC_HWMOD_FLAGS HWMOD_INIT_NO_RESET
115#else
116#define DEBUG_OMAP_GPMC_HWMOD_FLAGS 0
117#endif
118
119#if defined(CONFIG_DEBUG_OMAP2UART1)
120#undef DEBUG_OMAP2UART1_FLAGS
121#define DEBUG_OMAP2UART1_FLAGS DEBUG_OMAPUART_FLAGS
122#elif defined(CONFIG_DEBUG_OMAP2UART2)
123#undef DEBUG_OMAP2UART2_FLAGS
124#define DEBUG_OMAP2UART2_FLAGS DEBUG_OMAPUART_FLAGS
125#elif defined(CONFIG_DEBUG_OMAP2UART3)
126#undef DEBUG_OMAP2UART3_FLAGS
127#define DEBUG_OMAP2UART3_FLAGS DEBUG_OMAPUART_FLAGS
128#elif defined(CONFIG_DEBUG_OMAP3UART3)
129#undef DEBUG_OMAP3UART3_FLAGS
130#define DEBUG_OMAP3UART3_FLAGS DEBUG_OMAPUART_FLAGS
131#elif defined(CONFIG_DEBUG_OMAP3UART4)
132#undef DEBUG_OMAP3UART4_FLAGS
133#define DEBUG_OMAP3UART4_FLAGS DEBUG_OMAPUART_FLAGS
134#elif defined(CONFIG_DEBUG_OMAP4UART3)
135#undef DEBUG_OMAP4UART3_FLAGS
136#define DEBUG_OMAP4UART3_FLAGS DEBUG_OMAPUART_FLAGS
137#elif defined(CONFIG_DEBUG_OMAP4UART4)
138#undef DEBUG_OMAP4UART4_FLAGS
139#define DEBUG_OMAP4UART4_FLAGS DEBUG_OMAPUART_FLAGS
140#elif defined(CONFIG_DEBUG_TI81XXUART1)
141#undef DEBUG_TI81XXUART1_FLAGS
142#define DEBUG_TI81XXUART1_FLAGS DEBUG_OMAPUART_FLAGS
143#elif defined(CONFIG_DEBUG_TI81XXUART2)
144#undef DEBUG_TI81XXUART2_FLAGS
145#define DEBUG_TI81XXUART2_FLAGS DEBUG_OMAPUART_FLAGS
146#elif defined(CONFIG_DEBUG_TI81XXUART3)
147#undef DEBUG_TI81XXUART3_FLAGS
148#define DEBUG_TI81XXUART3_FLAGS DEBUG_OMAPUART_FLAGS
149#elif defined(CONFIG_DEBUG_AM33XXUART1)
150#undef DEBUG_AM33XXUART1_FLAGS
151#define DEBUG_AM33XXUART1_FLAGS DEBUG_OMAPUART_FLAGS
152#endif
153
154/**
155 * struct omap_hwmod_rst_info - IPs reset lines use by hwmod
156 * @name: name of the reset line (module local name)
157 * @rst_shift: Offset of the reset bit
158 * @st_shift: Offset of the reset status bit (OMAP2/3 only)
159 *
160 * @name should be something short, e.g., "cpu0" or "rst". It is defined
161 * locally to the hwmod.
162 */
163struct omap_hwmod_rst_info {
164 const char *name;
165 u8 rst_shift;
166 u8 st_shift;
167};
168
169/**
170 * struct omap_hwmod_opt_clk - optional clocks used by this hwmod
171 * @role: "sys", "32k", "tv", etc -- for use in clk_get()
172 * @clk: opt clock: OMAP clock name
173 * @_clk: pointer to the struct clk (filled in at runtime)
174 *
175 * The module's interface clock and main functional clock should not
176 * be added as optional clocks.
177 */
178struct omap_hwmod_opt_clk {
179 const char *role;
180 const char *clk;
181 struct clk *_clk;
182};
183
184
185/* omap_hwmod_omap2_firewall.flags bits */
186#define OMAP_FIREWALL_L3 (1 << 0)
187#define OMAP_FIREWALL_L4 (1 << 1)
188
189/**
190 * struct omap_hwmod_omap2_firewall - OMAP2/3 device firewall data
191 * @l3_perm_bit: bit shift for L3_PM_*_PERMISSION_*
192 * @l4_fw_region: L4 firewall region ID
193 * @l4_prot_group: L4 protection group ID
194 * @flags: (see omap_hwmod_omap2_firewall.flags macros above)
195 */
196struct omap_hwmod_omap2_firewall {
197 u8 l3_perm_bit;
198 u8 l4_fw_region;
199 u8 l4_prot_group;
200 u8 flags;
201};
202
203/*
204 * omap_hwmod_ocp_if.user bits: these indicate the initiators that use this
205 * interface to interact with the hwmod. Used to add sleep dependencies
206 * when the module is enabled or disabled.
207 */
208#define OCP_USER_MPU (1 << 0)
209#define OCP_USER_SDMA (1 << 1)
210#define OCP_USER_DSP (1 << 2)
211#define OCP_USER_IVA (1 << 3)
212
213/* omap_hwmod_ocp_if.flags bits */
214#define OCPIF_SWSUP_IDLE (1 << 0)
215#define OCPIF_CAN_BURST (1 << 1)
216
217/* omap_hwmod_ocp_if._int_flags possibilities */
218#define _OCPIF_INT_FLAGS_REGISTERED (1 << 0)
219
220
221/**
222 * struct omap_hwmod_ocp_if - OCP interface data
223 * @master: struct omap_hwmod that initiates OCP transactions on this link
224 * @slave: struct omap_hwmod that responds to OCP transactions on this link
225 * @addr: address space associated with this link
226 * @clk: interface clock: OMAP clock name
227 * @_clk: pointer to the interface struct clk (filled in at runtime)
228 * @fw: interface firewall data
229 * @width: OCP data width
230 * @user: initiators using this interface (see OCP_USER_* macros above)
231 * @flags: OCP interface flags (see OCPIF_* macros above)
232 * @_int_flags: internal flags (see _OCPIF_INT_FLAGS* macros above)
233 *
234 * It may also be useful to add a tag_cnt field for OCP2.x devices.
235 *
236 * Parameter names beginning with an underscore are managed internally by
237 * the omap_hwmod code and should not be set during initialization.
238 */
239struct omap_hwmod_ocp_if {
240 struct omap_hwmod *master;
241 struct omap_hwmod *slave;
242 struct omap_hwmod_addr_space *addr;
243 const char *clk;
244 struct clk *_clk;
245 struct list_head node;
246 union {
247 struct omap_hwmod_omap2_firewall omap2;
248 } fw;
249 u8 width;
250 u8 user;
251 u8 flags;
252 u8 _int_flags;
253};
254
255
256/* Macros for use in struct omap_hwmod_sysconfig */
257
258/* Flags for use in omap_hwmod_sysconfig.idlemodes */
259#define MASTER_STANDBY_SHIFT 4
260#define SLAVE_IDLE_SHIFT 0
261#define SIDLE_FORCE (HWMOD_IDLEMODE_FORCE << SLAVE_IDLE_SHIFT)
262#define SIDLE_NO (HWMOD_IDLEMODE_NO << SLAVE_IDLE_SHIFT)
263#define SIDLE_SMART (HWMOD_IDLEMODE_SMART << SLAVE_IDLE_SHIFT)
264#define SIDLE_SMART_WKUP (HWMOD_IDLEMODE_SMART_WKUP << SLAVE_IDLE_SHIFT)
265#define MSTANDBY_FORCE (HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT)
266#define MSTANDBY_NO (HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT)
267#define MSTANDBY_SMART (HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT)
268#define MSTANDBY_SMART_WKUP (HWMOD_IDLEMODE_SMART_WKUP << MASTER_STANDBY_SHIFT)
269
270/* omap_hwmod_sysconfig.sysc_flags capability flags */
271#define SYSC_HAS_AUTOIDLE (1 << 0)
272#define SYSC_HAS_SOFTRESET (1 << 1)
273#define SYSC_HAS_ENAWAKEUP (1 << 2)
274#define SYSC_HAS_EMUFREE (1 << 3)
275#define SYSC_HAS_CLOCKACTIVITY (1 << 4)
276#define SYSC_HAS_SIDLEMODE (1 << 5)
277#define SYSC_HAS_MIDLEMODE (1 << 6)
278#define SYSS_HAS_RESET_STATUS (1 << 7)
279#define SYSC_NO_CACHE (1 << 8) /* XXX SW flag, belongs elsewhere */
280#define SYSC_HAS_RESET_STATUS (1 << 9)
281#define SYSC_HAS_DMADISABLE (1 << 10)
282
283/* omap_hwmod_sysconfig.clockact flags */
284#define CLOCKACT_TEST_BOTH 0x0
285#define CLOCKACT_TEST_MAIN 0x1
286#define CLOCKACT_TEST_ICLK 0x2
287#define CLOCKACT_TEST_NONE 0x3
288
289/**
290 * struct omap_hwmod_class_sysconfig - hwmod class OCP_SYS* data
291 * @rev_offs: IP block revision register offset (from module base addr)
292 * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
293 * @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
294 * @srst_udelay: Delay needed after doing a softreset in usecs
295 * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART}
296 * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported
297 * @clockact: the default value of the module CLOCKACTIVITY bits
298 *
299 * @clockact describes to the module which clocks are likely to be
300 * disabled when the PRCM issues its idle request to the module. Some
301 * modules have separate clockdomains for the interface clock and main
302 * functional clock, and can check whether they should acknowledge the
303 * idle request based on the internal module functionality that has
304 * been associated with the clocks marked in @clockact. This field is
305 * only used if HWMOD_SET_DEFAULT_CLOCKACT is set (see below)
306 *
307 * @sysc_fields: structure containing the offset positions of various bits in
308 * SYSCONFIG register. This can be populated using omap_hwmod_sysc_type1 or
309 * omap_hwmod_sysc_type2 defined in omap_hwmod_common_data.c depending on
310 * whether the device ip is compliant with the original PRCM protocol
311 * defined for OMAP2420 or the new PRCM protocol for new OMAP4 IPs.
312 * If the device follows a different scheme for the sysconfig register ,
313 * then this field has to be populated with the correct offset structure.
314 */
315struct omap_hwmod_class_sysconfig {
316 s32 rev_offs;
317 s32 sysc_offs;
318 s32 syss_offs;
319 u16 sysc_flags;
320 struct sysc_regbits *sysc_fields;
321 u8 srst_udelay;
322 u8 idlemodes;
323};
324
325/**
326 * struct omap_hwmod_omap2_prcm - OMAP2/3-specific PRCM data
327 * @module_offs: PRCM submodule offset from the start of the PRM/CM
328 * @idlest_reg_id: IDLEST register ID (e.g., 3 for CM_IDLEST3)
329 * @idlest_idle_bit: register bit shift for CM_IDLEST slave idle bit
330 *
331 * @prcm_reg_id and @module_bit are specific to the AUTOIDLE, WKST,
332 * WKEN, GRPSEL registers. In an ideal world, no extra information
333 * would be needed for IDLEST information, but alas, there are some
334 * exceptions, so @idlest_reg_id, @idlest_idle_bit, @idlest_stdby_bit
335 * are needed for the IDLEST registers (c.f. 2430 I2CHS, 3430 USBHOST)
336 */
337struct omap_hwmod_omap2_prcm {
338 s16 module_offs;
339 u8 idlest_reg_id;
340 u8 idlest_idle_bit;
341};
342
343/*
344 * Possible values for struct omap_hwmod_omap4_prcm.flags
345 *
346 * HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT: Some IP blocks don't have a PRCM
347 * module-level context loss register associated with them; this
348 * flag bit should be set in those cases
349 * HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET: Some IP blocks have a valid CLKCTRL
350 * offset of zero; this flag bit should be set in those cases to
351 * distinguish from hwmods that have no clkctrl offset.
352 * HWMOD_OMAP4_CLKFWK_CLKCTR_CLOCK: Module clockctrl clock is managed
353 * by the common clock framework and not hwmod.
354 */
355#define HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT (1 << 0)
356#define HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET (1 << 1)
357#define HWMOD_OMAP4_CLKFWK_CLKCTR_CLOCK (1 << 2)
358
359/**
360 * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
361 * @clkctrl_offs: offset of the PRCM clock control register
362 * @rstctrl_offs: offset of the XXX_RSTCTRL register located in the PRM
363 * @context_offs: offset of the RM_*_CONTEXT register
364 * @lostcontext_mask: bitmask for selecting bits from RM_*_CONTEXT register
365 * @rstst_reg: (AM33XX only) address of the XXX_RSTST register in the PRM
366 * @submodule_wkdep_bit: bit shift of the WKDEP range
367 * @flags: PRCM register capabilities for this IP block
368 * @modulemode: allowable modulemodes
369 * @context_lost_counter: Count of module level context lost
370 *
371 * If @lostcontext_mask is not defined, context loss check code uses
372 * whole register without masking. @lostcontext_mask should only be
373 * defined in cases where @context_offs register is shared by two or
374 * more hwmods.
375 */
376struct omap_hwmod_omap4_prcm {
377 u16 clkctrl_offs;
378 u16 rstctrl_offs;
379 u16 rstst_offs;
380 u16 context_offs;
381 u32 lostcontext_mask;
382 u8 submodule_wkdep_bit;
383 u8 modulemode;
384 u8 flags;
385 int context_lost_counter;
386};
387
388
389/*
390 * omap_hwmod.flags definitions
391 *
392 * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
393 * of idle, rather than relying on module smart-idle
394 * HWMOD_SWSUP_MSTANDBY: omap_hwmod code should manually bring module in and
395 * out of standby, rather than relying on module smart-standby
396 * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
397 * SDRAM controller, etc. XXX probably belongs outside the main hwmod file
398 * XXX Should be HWMOD_SETUP_NO_RESET
399 * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM
400 * controller, etc. XXX probably belongs outside the main hwmod file
401 * XXX Should be HWMOD_SETUP_NO_IDLE
402 * HWMOD_NO_OCP_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE)
403 * when module is enabled, rather than the default, which is to
404 * enable autoidle
405 * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
406 * HWMOD_NO_IDLEST: this module does not have idle status - this is the case
407 * only for few initiator modules on OMAP2 & 3.
408 * HWMOD_CONTROL_OPT_CLKS_IN_RESET: Enable all optional clocks during reset.
409 * This is needed for devices like DSS that require optional clocks enabled
410 * in order to complete the reset. Optional clocks will be disabled
411 * again after the reset.
412 * HWMOD_16BIT_REG: Module has 16bit registers
413 * HWMOD_EXT_OPT_MAIN_CLK: The only main functional clock source for
414 * this IP block comes from an off-chip source and is not always
415 * enabled. This prevents the hwmod code from being able to
416 * enable and reset the IP block early. XXX Eventually it should
417 * be possible to query the clock framework for this information.
418 * HWMOD_BLOCK_WFI: Some OMAP peripherals apparently don't work
419 * correctly if the MPU is allowed to go idle while the
420 * peripherals are active. This is apparently true for the I2C on
421 * OMAP2420, and also the EMAC on AM3517/3505. It's unlikely that
422 * this is really true -- we're probably not configuring something
423 * correctly, or this is being abused to deal with some PM latency
424 * issues -- but we're currently suffering from a shortage of
425 * folks who are able to track these issues down properly.
426 * HWMOD_FORCE_MSTANDBY: Always keep MIDLEMODE bits cleared so that device
427 * is kept in force-standby mode. Failing to do so causes PM problems
428 * with musb on OMAP3630 at least. Note that musb has a dedicated register
429 * to control MSTANDBY signal when MIDLEMODE is set to force-standby.
430 * HWMOD_SWSUP_SIDLE_ACT: omap_hwmod code should manually bring the module
431 * out of idle, but rely on smart-idle to the put it back in idle,
432 * so the wakeups are still functional (Only known case for now is UART)
433 * HWMOD_RECONFIG_IO_CHAIN: omap_hwmod code needs to reconfigure wake-up
434 * events by calling _reconfigure_io_chain() when a device is enabled
435 * or idled.
436 * HWMOD_OPT_CLKS_NEEDED: The optional clocks are needed for the module to
437 * operate and they need to be handled at the same time as the main_clk.
438 * HWMOD_NO_IDLE: Do not idle the hwmod at all. Useful to handle certain
439 * IPs like CPSW on DRA7, where clocks to this module cannot be disabled.
440 * HWMOD_CLKDM_NOAUTO: Allows the hwmod's clockdomain to be prevented from
441 * entering HW_AUTO while hwmod is active. This is needed to workaround
442 * some modules which don't function correctly with HW_AUTO. For example,
443 * DCAN on DRA7x SoC needs this to workaround errata i893.
444 */
445#define HWMOD_SWSUP_SIDLE (1 << 0)
446#define HWMOD_SWSUP_MSTANDBY (1 << 1)
447#define HWMOD_INIT_NO_RESET (1 << 2)
448#define HWMOD_INIT_NO_IDLE (1 << 3)
449#define HWMOD_NO_OCP_AUTOIDLE (1 << 4)
450#define HWMOD_SET_DEFAULT_CLOCKACT (1 << 5)
451#define HWMOD_NO_IDLEST (1 << 6)
452#define HWMOD_CONTROL_OPT_CLKS_IN_RESET (1 << 7)
453#define HWMOD_16BIT_REG (1 << 8)
454#define HWMOD_EXT_OPT_MAIN_CLK (1 << 9)
455#define HWMOD_BLOCK_WFI (1 << 10)
456#define HWMOD_FORCE_MSTANDBY (1 << 11)
457#define HWMOD_SWSUP_SIDLE_ACT (1 << 12)
458#define HWMOD_RECONFIG_IO_CHAIN (1 << 13)
459#define HWMOD_OPT_CLKS_NEEDED (1 << 14)
460#define HWMOD_NO_IDLE (1 << 15)
461#define HWMOD_CLKDM_NOAUTO (1 << 16)
462
463/*
464 * omap_hwmod._int_flags definitions
465 * These are for internal use only and are managed by the omap_hwmod code.
466 *
467 * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module
468 * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached
469 * _HWMOD_SKIP_ENABLE: set if hwmod enabled during init (HWMOD_INIT_NO_IDLE) -
470 * causes the first call to _enable() to only update the pinmux
471 */
472#define _HWMOD_NO_MPU_PORT (1 << 0)
473#define _HWMOD_SYSCONFIG_LOADED (1 << 1)
474#define _HWMOD_SKIP_ENABLE (1 << 2)
475
476/*
477 * omap_hwmod._state definitions
478 *
479 * INITIALIZED: reset (optionally), initialized, enabled, disabled
480 * (optionally)
481 *
482 *
483 */
484#define _HWMOD_STATE_UNKNOWN 0
485#define _HWMOD_STATE_REGISTERED 1
486#define _HWMOD_STATE_CLKS_INITED 2
487#define _HWMOD_STATE_INITIALIZED 3
488#define _HWMOD_STATE_ENABLED 4
489#define _HWMOD_STATE_IDLE 5
490#define _HWMOD_STATE_DISABLED 6
491
492#ifdef CONFIG_PM
493#define _HWMOD_STATE_DEFAULT _HWMOD_STATE_IDLE
494#else
495#define _HWMOD_STATE_DEFAULT _HWMOD_STATE_ENABLED
496#endif
497
498/**
499 * struct omap_hwmod_class - the type of an IP block
500 * @name: name of the hwmod_class
501 * @sysc: device SYSCONFIG/SYSSTATUS register data
502 * @pre_shutdown: ptr to fn to be executed immediately prior to device shutdown
503 * @reset: ptr to fn to be executed in place of the standard hwmod reset fn
504 * @lock: ptr to fn to be executed to lock IP registers
505 * @unlock: ptr to fn to be executed to unlock IP registers
506 *
507 * Represent the class of a OMAP hardware "modules" (e.g. timer,
508 * smartreflex, gpio, uart...)
509 *
510 * @pre_shutdown is a function that will be run immediately before
511 * hwmod clocks are disabled, etc. It is intended for use for hwmods
512 * like the MPU watchdog, which cannot be disabled with the standard
513 * omap_hwmod_shutdown(). The function should return 0 upon success,
514 * or some negative error upon failure. Returning an error will cause
515 * omap_hwmod_shutdown() to abort the device shutdown and return an
516 * error.
517 *
518 * If @reset is defined, then the function it points to will be
519 * executed in place of the standard hwmod _reset() code in
520 * mach-omap2/omap_hwmod.c. This is needed for IP blocks which have
521 * unusual reset sequences - usually processor IP blocks like the IVA.
522 */
523struct omap_hwmod_class {
524 const char *name;
525 struct omap_hwmod_class_sysconfig *sysc;
526 int (*pre_shutdown)(struct omap_hwmod *oh);
527 int (*reset)(struct omap_hwmod *oh);
528 void (*lock)(struct omap_hwmod *oh);
529 void (*unlock)(struct omap_hwmod *oh);
530};
531
532/**
533 * struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks)
534 * @name: name of the hwmod
535 * @class: struct omap_hwmod_class * to the class of this hwmod
536 * @od: struct omap_device currently associated with this hwmod (internal use)
537 * @prcm: PRCM data pertaining to this hwmod
538 * @main_clk: main clock: OMAP clock name
539 * @_clk: pointer to the main struct clk (filled in at runtime)
540 * @opt_clks: other device clocks that drivers can request (0..*)
541 * @voltdm: pointer to voltage domain (filled in at runtime)
542 * @dev_attr: arbitrary device attributes that can be passed to the driver
543 * @_sysc_cache: internal-use hwmod flags
544 * @mpu_rt_idx: index of device address space for register target (for DT boot)
545 * @_mpu_rt_va: cached register target start address (internal use)
546 * @_mpu_port: cached MPU register target slave (internal use)
547 * @opt_clks_cnt: number of @opt_clks
548 * @master_cnt: number of @master entries
549 * @slaves_cnt: number of @slave entries
550 * @response_lat: device OCP response latency (in interface clock cycles)
551 * @_int_flags: internal-use hwmod flags
552 * @_state: internal-use hwmod state
553 * @_postsetup_state: internal-use state to leave the hwmod in after _setup()
554 * @flags: hwmod flags (documented below)
555 * @_lock: spinlock serializing operations on this hwmod
556 * @node: list node for hwmod list (internal use)
557 * @parent_hwmod: (temporary) a pointer to the hierarchical parent of this hwmod
558 *
559 * @main_clk refers to this module's "main clock," which for our
560 * purposes is defined as "the functional clock needed for register
561 * accesses to complete." Modules may not have a main clock if the
562 * interface clock also serves as a main clock.
563 *
564 * Parameter names beginning with an underscore are managed internally by
565 * the omap_hwmod code and should not be set during initialization.
566 *
567 * @masters and @slaves are now deprecated.
568 *
569 * @parent_hwmod is temporary; there should be no need for it, as this
570 * information should already be expressed in the OCP interface
571 * structures. @parent_hwmod is present as a workaround until we improve
572 * handling for hwmods with multiple parents (e.g., OMAP4+ DSS with
573 * multiple register targets across different interconnects).
574 */
575struct omap_hwmod {
576 const char *name;
577 struct omap_hwmod_class *class;
578 struct omap_device *od;
579 struct omap_hwmod_rst_info *rst_lines;
580 union {
581 struct omap_hwmod_omap2_prcm omap2;
582 struct omap_hwmod_omap4_prcm omap4;
583 } prcm;
584 const char *main_clk;
585 struct clk *_clk;
586 struct omap_hwmod_opt_clk *opt_clks;
587 const char *clkdm_name;
588 struct clockdomain *clkdm;
589 struct list_head slave_ports; /* connect to *_TA */
590 void *dev_attr;
591 u32 _sysc_cache;
592 void __iomem *_mpu_rt_va;
593 spinlock_t _lock;
594 struct lock_class_key hwmod_key; /* unique lock class */
595 struct list_head node;
596 struct omap_hwmod_ocp_if *_mpu_port;
597 u32 flags;
598 u8 mpu_rt_idx;
599 u8 response_lat;
600 u8 rst_lines_cnt;
601 u8 opt_clks_cnt;
602 u8 slaves_cnt;
603 u8 hwmods_cnt;
604 u8 _int_flags;
605 u8 _state;
606 u8 _postsetup_state;
607 struct omap_hwmod *parent_hwmod;
608};
609
610#ifdef CONFIG_OMAP_HWMOD
611
612struct device_node;
613
614struct omap_hwmod *omap_hwmod_lookup(const char *name);
615int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
616 void *data);
617
618int omap_hwmod_parse_module_range(struct omap_hwmod *oh,
619 struct device_node *np,
620 struct resource *res);
621
622struct ti_sysc_module_data;
623struct ti_sysc_cookie;
624
625int omap_hwmod_init_module(struct device *dev,
626 const struct ti_sysc_module_data *data,
627 struct ti_sysc_cookie *cookie);
628
629int omap_hwmod_enable(struct omap_hwmod *oh);
630int omap_hwmod_idle(struct omap_hwmod *oh);
631int omap_hwmod_shutdown(struct omap_hwmod *oh);
632
633int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name);
634int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name);
635
636void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs);
637u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs);
638int omap_hwmod_softreset(struct omap_hwmod *oh);
639
640void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh);
641
642int omap_hwmod_for_each_by_class(const char *classname,
643 int (*fn)(struct omap_hwmod *oh,
644 void *user),
645 void *user);
646
647int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state);
648
649extern void __init omap_hwmod_init(void);
650
651#else /* CONFIG_OMAP_HWMOD */
652
653static inline int
654omap_hwmod_for_each_by_class(const char *classname,
655 int (*fn)(struct omap_hwmod *oh, void *user),
656 void *user)
657{
658 return 0;
659}
660#endif /* CONFIG_OMAP_HWMOD */
661
662/*
663 * Chip variant-specific hwmod init routines - XXX should be converted
664 * to use initcalls once the initial boot ordering is straightened out
665 */
666extern int omap2420_hwmod_init(void);
667extern int omap2430_hwmod_init(void);
668extern int omap3xxx_hwmod_init(void);
669extern int dm814x_hwmod_init(void);
670extern int dm816x_hwmod_init(void);
671
672extern int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois);
673
674#endif
1/*
2 * omap_hwmod macros, structures
3 *
4 * Copyright (C) 2009-2011 Nokia Corporation
5 * Copyright (C) 2011-2012 Texas Instruments, Inc.
6 * Paul Walmsley
7 *
8 * Created in collaboration with (alphabetical order): Benoît Cousson,
9 * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari
10 * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License version 2 as
14 * published by the Free Software Foundation.
15 *
16 * These headers and macros are used to define OMAP on-chip module
17 * data and their integration with other OMAP modules and Linux.
18 * Copious documentation and references can also be found in the
19 * omap_hwmod code, in arch/arm/mach-omap2/omap_hwmod.c (as of this
20 * writing).
21 *
22 * To do:
23 * - add interconnect error log structures
24 * - init_conn_id_bit (CONNID_BIT_VECTOR)
25 * - implement default hwmod SMS/SDRC flags?
26 * - move Linux-specific data ("non-ROM data") out
27 *
28 */
29#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
30#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
31
32#include <linux/kernel.h>
33#include <linux/init.h>
34#include <linux/list.h>
35#include <linux/ioport.h>
36#include <linux/spinlock.h>
37
38struct omap_device;
39
40extern struct sysc_regbits omap_hwmod_sysc_type1;
41extern struct sysc_regbits omap_hwmod_sysc_type2;
42extern struct sysc_regbits omap_hwmod_sysc_type3;
43extern struct sysc_regbits omap34xx_sr_sysc_fields;
44extern struct sysc_regbits omap36xx_sr_sysc_fields;
45extern struct sysc_regbits omap3_sham_sysc_fields;
46extern struct sysc_regbits omap3xxx_aes_sysc_fields;
47extern struct sysc_regbits omap_hwmod_sysc_type_mcasp;
48extern struct sysc_regbits omap_hwmod_sysc_type_usb_host_fs;
49
50/*
51 * OCP SYSCONFIG bit shifts/masks TYPE1. These are for IPs compliant
52 * with the original PRCM protocol defined for OMAP2420
53 */
54#define SYSC_TYPE1_MIDLEMODE_SHIFT 12
55#define SYSC_TYPE1_MIDLEMODE_MASK (0x3 << SYSC_TYPE1_MIDLEMODE_SHIFT)
56#define SYSC_TYPE1_CLOCKACTIVITY_SHIFT 8
57#define SYSC_TYPE1_CLOCKACTIVITY_MASK (0x3 << SYSC_TYPE1_CLOCKACTIVITY_SHIFT)
58#define SYSC_TYPE1_SIDLEMODE_SHIFT 3
59#define SYSC_TYPE1_SIDLEMODE_MASK (0x3 << SYSC_TYPE1_SIDLEMODE_SHIFT)
60#define SYSC_TYPE1_ENAWAKEUP_SHIFT 2
61#define SYSC_TYPE1_ENAWAKEUP_MASK (1 << SYSC_TYPE1_ENAWAKEUP_SHIFT)
62#define SYSC_TYPE1_SOFTRESET_SHIFT 1
63#define SYSC_TYPE1_SOFTRESET_MASK (1 << SYSC_TYPE1_SOFTRESET_SHIFT)
64#define SYSC_TYPE1_AUTOIDLE_SHIFT 0
65#define SYSC_TYPE1_AUTOIDLE_MASK (1 << SYSC_TYPE1_AUTOIDLE_SHIFT)
66
67/*
68 * OCP SYSCONFIG bit shifts/masks TYPE2. These are for IPs compliant
69 * with the new PRCM protocol defined for new OMAP4 IPs.
70 */
71#define SYSC_TYPE2_SOFTRESET_SHIFT 0
72#define SYSC_TYPE2_SOFTRESET_MASK (1 << SYSC_TYPE2_SOFTRESET_SHIFT)
73#define SYSC_TYPE2_SIDLEMODE_SHIFT 2
74#define SYSC_TYPE2_SIDLEMODE_MASK (0x3 << SYSC_TYPE2_SIDLEMODE_SHIFT)
75#define SYSC_TYPE2_MIDLEMODE_SHIFT 4
76#define SYSC_TYPE2_MIDLEMODE_MASK (0x3 << SYSC_TYPE2_MIDLEMODE_SHIFT)
77#define SYSC_TYPE2_DMADISABLE_SHIFT 16
78#define SYSC_TYPE2_DMADISABLE_MASK (0x1 << SYSC_TYPE2_DMADISABLE_SHIFT)
79
80/*
81 * OCP SYSCONFIG bit shifts/masks TYPE3.
82 * This is applicable for some IPs present in AM33XX
83 */
84#define SYSC_TYPE3_SIDLEMODE_SHIFT 0
85#define SYSC_TYPE3_SIDLEMODE_MASK (0x3 << SYSC_TYPE3_SIDLEMODE_SHIFT)
86#define SYSC_TYPE3_MIDLEMODE_SHIFT 2
87#define SYSC_TYPE3_MIDLEMODE_MASK (0x3 << SYSC_TYPE3_MIDLEMODE_SHIFT)
88
89/* OCP SYSSTATUS bit shifts/masks */
90#define SYSS_RESETDONE_SHIFT 0
91#define SYSS_RESETDONE_MASK (1 << SYSS_RESETDONE_SHIFT)
92
93/* Master standby/slave idle mode flags */
94#define HWMOD_IDLEMODE_FORCE (1 << 0)
95#define HWMOD_IDLEMODE_NO (1 << 1)
96#define HWMOD_IDLEMODE_SMART (1 << 2)
97#define HWMOD_IDLEMODE_SMART_WKUP (1 << 3)
98
99/* modulemode control type (SW or HW) */
100#define MODULEMODE_HWCTRL 1
101#define MODULEMODE_SWCTRL 2
102
103#define DEBUG_OMAP2UART1_FLAGS 0
104#define DEBUG_OMAP2UART2_FLAGS 0
105#define DEBUG_OMAP2UART3_FLAGS 0
106#define DEBUG_OMAP3UART3_FLAGS 0
107#define DEBUG_OMAP3UART4_FLAGS 0
108#define DEBUG_OMAP4UART3_FLAGS 0
109#define DEBUG_OMAP4UART4_FLAGS 0
110#define DEBUG_TI81XXUART1_FLAGS 0
111#define DEBUG_TI81XXUART2_FLAGS 0
112#define DEBUG_TI81XXUART3_FLAGS 0
113#define DEBUG_AM33XXUART1_FLAGS 0
114
115#define DEBUG_OMAPUART_FLAGS (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET)
116
117#ifdef CONFIG_OMAP_GPMC_DEBUG
118#define DEBUG_OMAP_GPMC_HWMOD_FLAGS HWMOD_INIT_NO_RESET
119#else
120#define DEBUG_OMAP_GPMC_HWMOD_FLAGS 0
121#endif
122
123#if defined(CONFIG_DEBUG_OMAP2UART1)
124#undef DEBUG_OMAP2UART1_FLAGS
125#define DEBUG_OMAP2UART1_FLAGS DEBUG_OMAPUART_FLAGS
126#elif defined(CONFIG_DEBUG_OMAP2UART2)
127#undef DEBUG_OMAP2UART2_FLAGS
128#define DEBUG_OMAP2UART2_FLAGS DEBUG_OMAPUART_FLAGS
129#elif defined(CONFIG_DEBUG_OMAP2UART3)
130#undef DEBUG_OMAP2UART3_FLAGS
131#define DEBUG_OMAP2UART3_FLAGS DEBUG_OMAPUART_FLAGS
132#elif defined(CONFIG_DEBUG_OMAP3UART3)
133#undef DEBUG_OMAP3UART3_FLAGS
134#define DEBUG_OMAP3UART3_FLAGS DEBUG_OMAPUART_FLAGS
135#elif defined(CONFIG_DEBUG_OMAP3UART4)
136#undef DEBUG_OMAP3UART4_FLAGS
137#define DEBUG_OMAP3UART4_FLAGS DEBUG_OMAPUART_FLAGS
138#elif defined(CONFIG_DEBUG_OMAP4UART3)
139#undef DEBUG_OMAP4UART3_FLAGS
140#define DEBUG_OMAP4UART3_FLAGS DEBUG_OMAPUART_FLAGS
141#elif defined(CONFIG_DEBUG_OMAP4UART4)
142#undef DEBUG_OMAP4UART4_FLAGS
143#define DEBUG_OMAP4UART4_FLAGS DEBUG_OMAPUART_FLAGS
144#elif defined(CONFIG_DEBUG_TI81XXUART1)
145#undef DEBUG_TI81XXUART1_FLAGS
146#define DEBUG_TI81XXUART1_FLAGS DEBUG_OMAPUART_FLAGS
147#elif defined(CONFIG_DEBUG_TI81XXUART2)
148#undef DEBUG_TI81XXUART2_FLAGS
149#define DEBUG_TI81XXUART2_FLAGS DEBUG_OMAPUART_FLAGS
150#elif defined(CONFIG_DEBUG_TI81XXUART3)
151#undef DEBUG_TI81XXUART3_FLAGS
152#define DEBUG_TI81XXUART3_FLAGS DEBUG_OMAPUART_FLAGS
153#elif defined(CONFIG_DEBUG_AM33XXUART1)
154#undef DEBUG_AM33XXUART1_FLAGS
155#define DEBUG_AM33XXUART1_FLAGS DEBUG_OMAPUART_FLAGS
156#endif
157
158/**
159 * struct omap_hwmod_rst_info - IPs reset lines use by hwmod
160 * @name: name of the reset line (module local name)
161 * @rst_shift: Offset of the reset bit
162 * @st_shift: Offset of the reset status bit (OMAP2/3 only)
163 *
164 * @name should be something short, e.g., "cpu0" or "rst". It is defined
165 * locally to the hwmod.
166 */
167struct omap_hwmod_rst_info {
168 const char *name;
169 u8 rst_shift;
170 u8 st_shift;
171};
172
173/**
174 * struct omap_hwmod_opt_clk - optional clocks used by this hwmod
175 * @role: "sys", "32k", "tv", etc -- for use in clk_get()
176 * @clk: opt clock: OMAP clock name
177 * @_clk: pointer to the struct clk (filled in at runtime)
178 *
179 * The module's interface clock and main functional clock should not
180 * be added as optional clocks.
181 */
182struct omap_hwmod_opt_clk {
183 const char *role;
184 const char *clk;
185 struct clk *_clk;
186};
187
188
189/* omap_hwmod_omap2_firewall.flags bits */
190#define OMAP_FIREWALL_L3 (1 << 0)
191#define OMAP_FIREWALL_L4 (1 << 1)
192
193/**
194 * struct omap_hwmod_omap2_firewall - OMAP2/3 device firewall data
195 * @l3_perm_bit: bit shift for L3_PM_*_PERMISSION_*
196 * @l4_fw_region: L4 firewall region ID
197 * @l4_prot_group: L4 protection group ID
198 * @flags: (see omap_hwmod_omap2_firewall.flags macros above)
199 */
200struct omap_hwmod_omap2_firewall {
201 u8 l3_perm_bit;
202 u8 l4_fw_region;
203 u8 l4_prot_group;
204 u8 flags;
205};
206
207/*
208 * omap_hwmod_ocp_if.user bits: these indicate the initiators that use this
209 * interface to interact with the hwmod. Used to add sleep dependencies
210 * when the module is enabled or disabled.
211 */
212#define OCP_USER_MPU (1 << 0)
213#define OCP_USER_SDMA (1 << 1)
214#define OCP_USER_DSP (1 << 2)
215#define OCP_USER_IVA (1 << 3)
216
217/* omap_hwmod_ocp_if.flags bits */
218#define OCPIF_SWSUP_IDLE (1 << 0)
219#define OCPIF_CAN_BURST (1 << 1)
220
221/* omap_hwmod_ocp_if._int_flags possibilities */
222#define _OCPIF_INT_FLAGS_REGISTERED (1 << 0)
223
224
225/**
226 * struct omap_hwmod_ocp_if - OCP interface data
227 * @master: struct omap_hwmod that initiates OCP transactions on this link
228 * @slave: struct omap_hwmod that responds to OCP transactions on this link
229 * @addr: address space associated with this link
230 * @clk: interface clock: OMAP clock name
231 * @_clk: pointer to the interface struct clk (filled in at runtime)
232 * @fw: interface firewall data
233 * @width: OCP data width
234 * @user: initiators using this interface (see OCP_USER_* macros above)
235 * @flags: OCP interface flags (see OCPIF_* macros above)
236 * @_int_flags: internal flags (see _OCPIF_INT_FLAGS* macros above)
237 *
238 * It may also be useful to add a tag_cnt field for OCP2.x devices.
239 *
240 * Parameter names beginning with an underscore are managed internally by
241 * the omap_hwmod code and should not be set during initialization.
242 */
243struct omap_hwmod_ocp_if {
244 struct omap_hwmod *master;
245 struct omap_hwmod *slave;
246 struct omap_hwmod_addr_space *addr;
247 const char *clk;
248 struct clk *_clk;
249 struct list_head node;
250 union {
251 struct omap_hwmod_omap2_firewall omap2;
252 } fw;
253 u8 width;
254 u8 user;
255 u8 flags;
256 u8 _int_flags;
257};
258
259
260/* Macros for use in struct omap_hwmod_sysconfig */
261
262/* Flags for use in omap_hwmod_sysconfig.idlemodes */
263#define MASTER_STANDBY_SHIFT 4
264#define SLAVE_IDLE_SHIFT 0
265#define SIDLE_FORCE (HWMOD_IDLEMODE_FORCE << SLAVE_IDLE_SHIFT)
266#define SIDLE_NO (HWMOD_IDLEMODE_NO << SLAVE_IDLE_SHIFT)
267#define SIDLE_SMART (HWMOD_IDLEMODE_SMART << SLAVE_IDLE_SHIFT)
268#define SIDLE_SMART_WKUP (HWMOD_IDLEMODE_SMART_WKUP << SLAVE_IDLE_SHIFT)
269#define MSTANDBY_FORCE (HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT)
270#define MSTANDBY_NO (HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT)
271#define MSTANDBY_SMART (HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT)
272#define MSTANDBY_SMART_WKUP (HWMOD_IDLEMODE_SMART_WKUP << MASTER_STANDBY_SHIFT)
273
274/* omap_hwmod_sysconfig.sysc_flags capability flags */
275#define SYSC_HAS_AUTOIDLE (1 << 0)
276#define SYSC_HAS_SOFTRESET (1 << 1)
277#define SYSC_HAS_ENAWAKEUP (1 << 2)
278#define SYSC_HAS_EMUFREE (1 << 3)
279#define SYSC_HAS_CLOCKACTIVITY (1 << 4)
280#define SYSC_HAS_SIDLEMODE (1 << 5)
281#define SYSC_HAS_MIDLEMODE (1 << 6)
282#define SYSS_HAS_RESET_STATUS (1 << 7)
283#define SYSC_NO_CACHE (1 << 8) /* XXX SW flag, belongs elsewhere */
284#define SYSC_HAS_RESET_STATUS (1 << 9)
285#define SYSC_HAS_DMADISABLE (1 << 10)
286
287/* omap_hwmod_sysconfig.clockact flags */
288#define CLOCKACT_TEST_BOTH 0x0
289#define CLOCKACT_TEST_MAIN 0x1
290#define CLOCKACT_TEST_ICLK 0x2
291#define CLOCKACT_TEST_NONE 0x3
292
293/**
294 * struct omap_hwmod_class_sysconfig - hwmod class OCP_SYS* data
295 * @rev_offs: IP block revision register offset (from module base addr)
296 * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
297 * @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
298 * @srst_udelay: Delay needed after doing a softreset in usecs
299 * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART}
300 * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported
301 * @clockact: the default value of the module CLOCKACTIVITY bits
302 *
303 * @clockact describes to the module which clocks are likely to be
304 * disabled when the PRCM issues its idle request to the module. Some
305 * modules have separate clockdomains for the interface clock and main
306 * functional clock, and can check whether they should acknowledge the
307 * idle request based on the internal module functionality that has
308 * been associated with the clocks marked in @clockact. This field is
309 * only used if HWMOD_SET_DEFAULT_CLOCKACT is set (see below)
310 *
311 * @sysc_fields: structure containing the offset positions of various bits in
312 * SYSCONFIG register. This can be populated using omap_hwmod_sysc_type1 or
313 * omap_hwmod_sysc_type2 defined in omap_hwmod_common_data.c depending on
314 * whether the device ip is compliant with the original PRCM protocol
315 * defined for OMAP2420 or the new PRCM protocol for new OMAP4 IPs.
316 * If the device follows a different scheme for the sysconfig register ,
317 * then this field has to be populated with the correct offset structure.
318 */
319struct omap_hwmod_class_sysconfig {
320 u32 rev_offs;
321 u32 sysc_offs;
322 u32 syss_offs;
323 u16 sysc_flags;
324 struct sysc_regbits *sysc_fields;
325 u8 srst_udelay;
326 u8 idlemodes;
327};
328
329/**
330 * struct omap_hwmod_omap2_prcm - OMAP2/3-specific PRCM data
331 * @module_offs: PRCM submodule offset from the start of the PRM/CM
332 * @idlest_reg_id: IDLEST register ID (e.g., 3 for CM_IDLEST3)
333 * @idlest_idle_bit: register bit shift for CM_IDLEST slave idle bit
334 *
335 * @prcm_reg_id and @module_bit are specific to the AUTOIDLE, WKST,
336 * WKEN, GRPSEL registers. In an ideal world, no extra information
337 * would be needed for IDLEST information, but alas, there are some
338 * exceptions, so @idlest_reg_id, @idlest_idle_bit, @idlest_stdby_bit
339 * are needed for the IDLEST registers (c.f. 2430 I2CHS, 3430 USBHOST)
340 */
341struct omap_hwmod_omap2_prcm {
342 s16 module_offs;
343 u8 idlest_reg_id;
344 u8 idlest_idle_bit;
345};
346
347/*
348 * Possible values for struct omap_hwmod_omap4_prcm.flags
349 *
350 * HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT: Some IP blocks don't have a PRCM
351 * module-level context loss register associated with them; this
352 * flag bit should be set in those cases
353 * HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET: Some IP blocks have a valid CLKCTRL
354 * offset of zero; this flag bit should be set in those cases to
355 * distinguish from hwmods that have no clkctrl offset.
356 * HWMOD_OMAP4_CLKFWK_CLKCTR_CLOCK: Module clockctrl clock is managed
357 * by the common clock framework and not hwmod.
358 */
359#define HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT (1 << 0)
360#define HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET (1 << 1)
361#define HWMOD_OMAP4_CLKFWK_CLKCTR_CLOCK (1 << 2)
362
363/**
364 * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
365 * @clkctrl_offs: offset of the PRCM clock control register
366 * @rstctrl_offs: offset of the XXX_RSTCTRL register located in the PRM
367 * @context_offs: offset of the RM_*_CONTEXT register
368 * @lostcontext_mask: bitmask for selecting bits from RM_*_CONTEXT register
369 * @rstst_reg: (AM33XX only) address of the XXX_RSTST register in the PRM
370 * @submodule_wkdep_bit: bit shift of the WKDEP range
371 * @flags: PRCM register capabilities for this IP block
372 * @modulemode: allowable modulemodes
373 * @context_lost_counter: Count of module level context lost
374 *
375 * If @lostcontext_mask is not defined, context loss check code uses
376 * whole register without masking. @lostcontext_mask should only be
377 * defined in cases where @context_offs register is shared by two or
378 * more hwmods.
379 */
380struct omap_hwmod_omap4_prcm {
381 u16 clkctrl_offs;
382 u16 rstctrl_offs;
383 u16 rstst_offs;
384 u16 context_offs;
385 u32 lostcontext_mask;
386 u8 submodule_wkdep_bit;
387 u8 modulemode;
388 u8 flags;
389 int context_lost_counter;
390};
391
392
393/*
394 * omap_hwmod.flags definitions
395 *
396 * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
397 * of idle, rather than relying on module smart-idle
398 * HWMOD_SWSUP_MSTANDBY: omap_hwmod code should manually bring module in and
399 * out of standby, rather than relying on module smart-standby
400 * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
401 * SDRAM controller, etc. XXX probably belongs outside the main hwmod file
402 * XXX Should be HWMOD_SETUP_NO_RESET
403 * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM
404 * controller, etc. XXX probably belongs outside the main hwmod file
405 * XXX Should be HWMOD_SETUP_NO_IDLE
406 * HWMOD_NO_OCP_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE)
407 * when module is enabled, rather than the default, which is to
408 * enable autoidle
409 * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
410 * HWMOD_NO_IDLEST: this module does not have idle status - this is the case
411 * only for few initiator modules on OMAP2 & 3.
412 * HWMOD_CONTROL_OPT_CLKS_IN_RESET: Enable all optional clocks during reset.
413 * This is needed for devices like DSS that require optional clocks enabled
414 * in order to complete the reset. Optional clocks will be disabled
415 * again after the reset.
416 * HWMOD_16BIT_REG: Module has 16bit registers
417 * HWMOD_EXT_OPT_MAIN_CLK: The only main functional clock source for
418 * this IP block comes from an off-chip source and is not always
419 * enabled. This prevents the hwmod code from being able to
420 * enable and reset the IP block early. XXX Eventually it should
421 * be possible to query the clock framework for this information.
422 * HWMOD_BLOCK_WFI: Some OMAP peripherals apparently don't work
423 * correctly if the MPU is allowed to go idle while the
424 * peripherals are active. This is apparently true for the I2C on
425 * OMAP2420, and also the EMAC on AM3517/3505. It's unlikely that
426 * this is really true -- we're probably not configuring something
427 * correctly, or this is being abused to deal with some PM latency
428 * issues -- but we're currently suffering from a shortage of
429 * folks who are able to track these issues down properly.
430 * HWMOD_FORCE_MSTANDBY: Always keep MIDLEMODE bits cleared so that device
431 * is kept in force-standby mode. Failing to do so causes PM problems
432 * with musb on OMAP3630 at least. Note that musb has a dedicated register
433 * to control MSTANDBY signal when MIDLEMODE is set to force-standby.
434 * HWMOD_SWSUP_SIDLE_ACT: omap_hwmod code should manually bring the module
435 * out of idle, but rely on smart-idle to the put it back in idle,
436 * so the wakeups are still functional (Only known case for now is UART)
437 * HWMOD_RECONFIG_IO_CHAIN: omap_hwmod code needs to reconfigure wake-up
438 * events by calling _reconfigure_io_chain() when a device is enabled
439 * or idled.
440 * HWMOD_OPT_CLKS_NEEDED: The optional clocks are needed for the module to
441 * operate and they need to be handled at the same time as the main_clk.
442 * HWMOD_NO_IDLE: Do not idle the hwmod at all. Useful to handle certain
443 * IPs like CPSW on DRA7, where clocks to this module cannot be disabled.
444 * HWMOD_CLKDM_NOAUTO: Allows the hwmod's clockdomain to be prevented from
445 * entering HW_AUTO while hwmod is active. This is needed to workaround
446 * some modules which don't function correctly with HW_AUTO. For example,
447 * DCAN on DRA7x SoC needs this to workaround errata i893.
448 */
449#define HWMOD_SWSUP_SIDLE (1 << 0)
450#define HWMOD_SWSUP_MSTANDBY (1 << 1)
451#define HWMOD_INIT_NO_RESET (1 << 2)
452#define HWMOD_INIT_NO_IDLE (1 << 3)
453#define HWMOD_NO_OCP_AUTOIDLE (1 << 4)
454#define HWMOD_SET_DEFAULT_CLOCKACT (1 << 5)
455#define HWMOD_NO_IDLEST (1 << 6)
456#define HWMOD_CONTROL_OPT_CLKS_IN_RESET (1 << 7)
457#define HWMOD_16BIT_REG (1 << 8)
458#define HWMOD_EXT_OPT_MAIN_CLK (1 << 9)
459#define HWMOD_BLOCK_WFI (1 << 10)
460#define HWMOD_FORCE_MSTANDBY (1 << 11)
461#define HWMOD_SWSUP_SIDLE_ACT (1 << 12)
462#define HWMOD_RECONFIG_IO_CHAIN (1 << 13)
463#define HWMOD_OPT_CLKS_NEEDED (1 << 14)
464#define HWMOD_NO_IDLE (1 << 15)
465#define HWMOD_CLKDM_NOAUTO (1 << 16)
466
467/*
468 * omap_hwmod._int_flags definitions
469 * These are for internal use only and are managed by the omap_hwmod code.
470 *
471 * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module
472 * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached
473 * _HWMOD_SKIP_ENABLE: set if hwmod enabled during init (HWMOD_INIT_NO_IDLE) -
474 * causes the first call to _enable() to only update the pinmux
475 */
476#define _HWMOD_NO_MPU_PORT (1 << 0)
477#define _HWMOD_SYSCONFIG_LOADED (1 << 1)
478#define _HWMOD_SKIP_ENABLE (1 << 2)
479
480/*
481 * omap_hwmod._state definitions
482 *
483 * INITIALIZED: reset (optionally), initialized, enabled, disabled
484 * (optionally)
485 *
486 *
487 */
488#define _HWMOD_STATE_UNKNOWN 0
489#define _HWMOD_STATE_REGISTERED 1
490#define _HWMOD_STATE_CLKS_INITED 2
491#define _HWMOD_STATE_INITIALIZED 3
492#define _HWMOD_STATE_ENABLED 4
493#define _HWMOD_STATE_IDLE 5
494#define _HWMOD_STATE_DISABLED 6
495
496/**
497 * struct omap_hwmod_class - the type of an IP block
498 * @name: name of the hwmod_class
499 * @sysc: device SYSCONFIG/SYSSTATUS register data
500 * @rev: revision of the IP class
501 * @pre_shutdown: ptr to fn to be executed immediately prior to device shutdown
502 * @reset: ptr to fn to be executed in place of the standard hwmod reset fn
503 * @enable_preprogram: ptr to fn to be executed during device enable
504 * @lock: ptr to fn to be executed to lock IP registers
505 * @unlock: ptr to fn to be executed to unlock IP registers
506 *
507 * Represent the class of a OMAP hardware "modules" (e.g. timer,
508 * smartreflex, gpio, uart...)
509 *
510 * @pre_shutdown is a function that will be run immediately before
511 * hwmod clocks are disabled, etc. It is intended for use for hwmods
512 * like the MPU watchdog, which cannot be disabled with the standard
513 * omap_hwmod_shutdown(). The function should return 0 upon success,
514 * or some negative error upon failure. Returning an error will cause
515 * omap_hwmod_shutdown() to abort the device shutdown and return an
516 * error.
517 *
518 * If @reset is defined, then the function it points to will be
519 * executed in place of the standard hwmod _reset() code in
520 * mach-omap2/omap_hwmod.c. This is needed for IP blocks which have
521 * unusual reset sequences - usually processor IP blocks like the IVA.
522 */
523struct omap_hwmod_class {
524 const char *name;
525 struct omap_hwmod_class_sysconfig *sysc;
526 u32 rev;
527 int (*pre_shutdown)(struct omap_hwmod *oh);
528 int (*reset)(struct omap_hwmod *oh);
529 int (*enable_preprogram)(struct omap_hwmod *oh);
530 void (*lock)(struct omap_hwmod *oh);
531 void (*unlock)(struct omap_hwmod *oh);
532};
533
534/**
535 * struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks)
536 * @name: name of the hwmod
537 * @class: struct omap_hwmod_class * to the class of this hwmod
538 * @od: struct omap_device currently associated with this hwmod (internal use)
539 * @prcm: PRCM data pertaining to this hwmod
540 * @main_clk: main clock: OMAP clock name
541 * @_clk: pointer to the main struct clk (filled in at runtime)
542 * @opt_clks: other device clocks that drivers can request (0..*)
543 * @voltdm: pointer to voltage domain (filled in at runtime)
544 * @dev_attr: arbitrary device attributes that can be passed to the driver
545 * @_sysc_cache: internal-use hwmod flags
546 * @mpu_rt_idx: index of device address space for register target (for DT boot)
547 * @_mpu_rt_va: cached register target start address (internal use)
548 * @_mpu_port: cached MPU register target slave (internal use)
549 * @opt_clks_cnt: number of @opt_clks
550 * @master_cnt: number of @master entries
551 * @slaves_cnt: number of @slave entries
552 * @response_lat: device OCP response latency (in interface clock cycles)
553 * @_int_flags: internal-use hwmod flags
554 * @_state: internal-use hwmod state
555 * @_postsetup_state: internal-use state to leave the hwmod in after _setup()
556 * @flags: hwmod flags (documented below)
557 * @_lock: spinlock serializing operations on this hwmod
558 * @node: list node for hwmod list (internal use)
559 * @parent_hwmod: (temporary) a pointer to the hierarchical parent of this hwmod
560 *
561 * @main_clk refers to this module's "main clock," which for our
562 * purposes is defined as "the functional clock needed for register
563 * accesses to complete." Modules may not have a main clock if the
564 * interface clock also serves as a main clock.
565 *
566 * Parameter names beginning with an underscore are managed internally by
567 * the omap_hwmod code and should not be set during initialization.
568 *
569 * @masters and @slaves are now deprecated.
570 *
571 * @parent_hwmod is temporary; there should be no need for it, as this
572 * information should already be expressed in the OCP interface
573 * structures. @parent_hwmod is present as a workaround until we improve
574 * handling for hwmods with multiple parents (e.g., OMAP4+ DSS with
575 * multiple register targets across different interconnects).
576 */
577struct omap_hwmod {
578 const char *name;
579 struct omap_hwmod_class *class;
580 struct omap_device *od;
581 struct omap_hwmod_rst_info *rst_lines;
582 union {
583 struct omap_hwmod_omap2_prcm omap2;
584 struct omap_hwmod_omap4_prcm omap4;
585 } prcm;
586 const char *main_clk;
587 struct clk *_clk;
588 struct omap_hwmod_opt_clk *opt_clks;
589 const char *clkdm_name;
590 struct clockdomain *clkdm;
591 struct list_head slave_ports; /* connect to *_TA */
592 void *dev_attr;
593 u32 _sysc_cache;
594 void __iomem *_mpu_rt_va;
595 spinlock_t _lock;
596 struct lock_class_key hwmod_key; /* unique lock class */
597 struct list_head node;
598 struct omap_hwmod_ocp_if *_mpu_port;
599 u32 flags;
600 u8 mpu_rt_idx;
601 u8 response_lat;
602 u8 rst_lines_cnt;
603 u8 opt_clks_cnt;
604 u8 slaves_cnt;
605 u8 hwmods_cnt;
606 u8 _int_flags;
607 u8 _state;
608 u8 _postsetup_state;
609 struct omap_hwmod *parent_hwmod;
610};
611
612struct device_node;
613
614struct omap_hwmod *omap_hwmod_lookup(const char *name);
615int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
616 void *data);
617
618int __init omap_hwmod_setup_one(const char *name);
619int omap_hwmod_parse_module_range(struct omap_hwmod *oh,
620 struct device_node *np,
621 struct resource *res);
622
623struct ti_sysc_module_data;
624struct ti_sysc_cookie;
625
626int omap_hwmod_init_module(struct device *dev,
627 const struct ti_sysc_module_data *data,
628 struct ti_sysc_cookie *cookie);
629
630int omap_hwmod_enable(struct omap_hwmod *oh);
631int omap_hwmod_idle(struct omap_hwmod *oh);
632int omap_hwmod_shutdown(struct omap_hwmod *oh);
633
634int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name);
635int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name);
636
637void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs);
638u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs);
639int omap_hwmod_softreset(struct omap_hwmod *oh);
640
641int omap_hwmod_count_resources(struct omap_hwmod *oh, unsigned long flags);
642int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
643int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type,
644 const char *name, struct resource *res);
645
646struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh);
647void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh);
648
649int omap_hwmod_enable_wakeup(struct omap_hwmod *oh);
650int omap_hwmod_disable_wakeup(struct omap_hwmod *oh);
651
652int omap_hwmod_for_each_by_class(const char *classname,
653 int (*fn)(struct omap_hwmod *oh,
654 void *user),
655 void *user);
656
657int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state);
658int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
659
660extern void __init omap_hwmod_init(void);
661
662const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh);
663
664/*
665 *
666 */
667
668extern int omap_hwmod_aess_preprogram(struct omap_hwmod *oh);
669void omap_hwmod_rtc_unlock(struct omap_hwmod *oh);
670void omap_hwmod_rtc_lock(struct omap_hwmod *oh);
671
672/*
673 * Chip variant-specific hwmod init routines - XXX should be converted
674 * to use initcalls once the initial boot ordering is straightened out
675 */
676extern int omap2420_hwmod_init(void);
677extern int omap2430_hwmod_init(void);
678extern int omap3xxx_hwmod_init(void);
679extern int omap44xx_hwmod_init(void);
680extern int omap54xx_hwmod_init(void);
681extern int am33xx_hwmod_init(void);
682extern int dm814x_hwmod_init(void);
683extern int dm816x_hwmod_init(void);
684extern int dra7xx_hwmod_init(void);
685int am43xx_hwmod_init(void);
686
687extern int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois);
688
689#endif