Loading...
Note: File does not exist in v6.13.7.
1/*
2 * wm8750.dtsi - Device tree file for Wondermedia WM8750 SoC
3 *
4 * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
5 *
6 * Licensed under GPLv2 or later
7 */
8
9/include/ "skeleton.dtsi"
10
11/ {
12 compatible = "wm,wm8750";
13
14 cpus {
15 #address-cells = <0>;
16 #size-cells = <0>;
17
18 cpu {
19 device_type = "cpu";
20 compatible = "arm,arm1176jzf";
21 };
22 };
23
24 aliases {
25 serial0 = &uart0;
26 serial1 = &uart1;
27 serial2 = &uart2;
28 serial3 = &uart3;
29 serial4 = &uart4;
30 serial5 = &uart5;
31 i2c0 = &i2c_0;
32 i2c1 = &i2c_1;
33 };
34
35 soc {
36 #address-cells = <1>;
37 #size-cells = <1>;
38 compatible = "simple-bus";
39 ranges;
40 interrupt-parent = <&intc0>;
41
42 intc0: interrupt-controller@d8140000 {
43 compatible = "via,vt8500-intc";
44 interrupt-controller;
45 reg = <0xd8140000 0x10000>;
46 #interrupt-cells = <1>;
47 };
48
49 /* Secondary IC cascaded to intc0 */
50 intc1: interrupt-controller@d8150000 {
51 compatible = "via,vt8500-intc";
52 interrupt-controller;
53 #interrupt-cells = <1>;
54 reg = <0xD8150000 0x10000>;
55 interrupts = <56 57 58 59 60 61 62 63>;
56 };
57
58 pinctrl: pinctrl@d8110000 {
59 compatible = "wm,wm8750-pinctrl";
60 reg = <0xd8110000 0x10000>;
61 interrupt-controller;
62 #interrupt-cells = <2>;
63 gpio-controller;
64 #gpio-cells = <2>;
65 };
66
67 pmc@d8130000 {
68 compatible = "via,vt8500-pmc";
69 reg = <0xd8130000 0x1000>;
70
71 clocks {
72 #address-cells = <1>;
73 #size-cells = <0>;
74
75 ref24: ref24M {
76 #clock-cells = <0>;
77 compatible = "fixed-clock";
78 clock-frequency = <24000000>;
79 };
80
81 ref25: ref25M {
82 #clock-cells = <0>;
83 compatible = "fixed-clock";
84 clock-frequency = <25000000>;
85 };
86
87 plla: plla {
88 #clock-cells = <0>;
89 compatible = "wm,wm8750-pll-clock";
90 clocks = <&ref25>;
91 reg = <0x200>;
92 };
93
94 pllb: pllb {
95 #clock-cells = <0>;
96 compatible = "wm,wm8750-pll-clock";
97 clocks = <&ref25>;
98 reg = <0x204>;
99 };
100
101 pllc: pllc {
102 #clock-cells = <0>;
103 compatible = "wm,wm8750-pll-clock";
104 clocks = <&ref25>;
105 reg = <0x208>;
106 };
107
108 plld: plld {
109 #clock-cells = <0>;
110 compatible = "wm,wm8750-pll-clock";
111 clocks = <&ref25>;
112 reg = <0x20C>;
113 };
114
115 plle: plle {
116 #clock-cells = <0>;
117 compatible = "wm,wm8750-pll-clock";
118 clocks = <&ref25>;
119 reg = <0x210>;
120 };
121
122 clkarm: arm {
123 #clock-cells = <0>;
124 compatible = "via,vt8500-device-clock";
125 clocks = <&plla>;
126 divisor-reg = <0x300>;
127 };
128
129 clkahb: ahb {
130 #clock-cells = <0>;
131 compatible = "via,vt8500-device-clock";
132 clocks = <&pllb>;
133 divisor-reg = <0x304>;
134 };
135
136 clkapb: apb {
137 #clock-cells = <0>;
138 compatible = "via,vt8500-device-clock";
139 clocks = <&pllb>;
140 divisor-reg = <0x320>;
141 };
142
143 clkddr: ddr {
144 #clock-cells = <0>;
145 compatible = "via,vt8500-device-clock";
146 clocks = <&plld>;
147 divisor-reg = <0x310>;
148 };
149
150 clkuart0: uart0 {
151 #clock-cells = <0>;
152 compatible = "via,vt8500-device-clock";
153 clocks = <&ref24>;
154 enable-reg = <0x254>;
155 enable-bit = <24>;
156 };
157
158 clkuart1: uart1 {
159 #clock-cells = <0>;
160 compatible = "via,vt8500-device-clock";
161 clocks = <&ref24>;
162 enable-reg = <0x254>;
163 enable-bit = <25>;
164 };
165
166 clkuart2: uart2 {
167 #clock-cells = <0>;
168 compatible = "via,vt8500-device-clock";
169 clocks = <&ref24>;
170 enable-reg = <0x254>;
171 enable-bit = <26>;
172 };
173
174 clkuart3: uart3 {
175 #clock-cells = <0>;
176 compatible = "via,vt8500-device-clock";
177 clocks = <&ref24>;
178 enable-reg = <0x254>;
179 enable-bit = <27>;
180 };
181
182 clkuart4: uart4 {
183 #clock-cells = <0>;
184 compatible = "via,vt8500-device-clock";
185 clocks = <&ref24>;
186 enable-reg = <0x254>;
187 enable-bit = <28>;
188 };
189
190 clkuart5: uart5 {
191 #clock-cells = <0>;
192 compatible = "via,vt8500-device-clock";
193 clocks = <&ref24>;
194 enable-reg = <0x254>;
195 enable-bit = <29>;
196 };
197
198 clkpwm: pwm {
199 #clock-cells = <0>;
200 compatible = "via,vt8500-device-clock";
201 clocks = <&pllb>;
202 divisor-reg = <0x350>;
203 enable-reg = <0x250>;
204 enable-bit = <17>;
205 };
206
207 clksdhc: sdhc {
208 #clock-cells = <0>;
209 compatible = "via,vt8500-device-clock";
210 clocks = <&pllb>;
211 divisor-reg = <0x330>;
212 divisor-mask = <0x3f>;
213 enable-reg = <0x250>;
214 enable-bit = <0>;
215 };
216
217 clki2c0: i2c0clk {
218 #clock-cells = <0>;
219 compatible = "via,vt8500-device-clock";
220 clocks = <&pllb>;
221 divisor-reg = <0x3A0>;
222 enable-reg = <0x250>;
223 enable-bit = <8>;
224 };
225
226 clki2c1: i2c1clk {
227 #clock-cells = <0>;
228 compatible = "via,vt8500-device-clock";
229 clocks = <&pllb>;
230 divisor-reg = <0x3A4>;
231 enable-reg = <0x250>;
232 enable-bit = <9>;
233 };
234 };
235 };
236
237 pwm: pwm@d8220000 {
238 #pwm-cells = <3>;
239 compatible = "via,vt8500-pwm";
240 reg = <0xd8220000 0x100>;
241 clocks = <&clkpwm>;
242 };
243
244 timer@d8130100 {
245 compatible = "via,vt8500-timer";
246 reg = <0xd8130100 0x28>;
247 interrupts = <36>;
248 };
249
250 ehci@d8007900 {
251 compatible = "via,vt8500-ehci";
252 reg = <0xd8007900 0x200>;
253 interrupts = <26>;
254 };
255
256 uhci@d8007b00 {
257 compatible = "platform-uhci";
258 reg = <0xd8007b00 0x200>;
259 interrupts = <26>;
260 };
261
262 uhci@d8008d00 {
263 compatible = "platform-uhci";
264 reg = <0xd8008d00 0x200>;
265 interrupts = <26>;
266 };
267
268 uart0: serial@d8200000 {
269 compatible = "via,vt8500-uart";
270 reg = <0xd8200000 0x1040>;
271 interrupts = <32>;
272 clocks = <&clkuart0>;
273 status = "disabled";
274 };
275
276 uart1: serial@d82b0000 {
277 compatible = "via,vt8500-uart";
278 reg = <0xd82b0000 0x1040>;
279 interrupts = <33>;
280 clocks = <&clkuart1>;
281 status = "disabled";
282 };
283
284 uart2: serial@d8210000 {
285 compatible = "via,vt8500-uart";
286 reg = <0xd8210000 0x1040>;
287 interrupts = <47>;
288 clocks = <&clkuart2>;
289 status = "disabled";
290 };
291
292 uart3: serial@d82c0000 {
293 compatible = "via,vt8500-uart";
294 reg = <0xd82c0000 0x1040>;
295 interrupts = <50>;
296 clocks = <&clkuart3>;
297 status = "disabled";
298 };
299
300 uart4: serial@d8370000 {
301 compatible = "via,vt8500-uart";
302 reg = <0xd8370000 0x1040>;
303 interrupts = <30>;
304 clocks = <&clkuart4>;
305 status = "disabled";
306 };
307
308 uart5: serial@d8380000 {
309 compatible = "via,vt8500-uart";
310 reg = <0xd8380000 0x1040>;
311 interrupts = <43>;
312 clocks = <&clkuart5>;
313 status = "disabled";
314 };
315
316 rtc@d8100000 {
317 compatible = "via,vt8500-rtc";
318 reg = <0xd8100000 0x10000>;
319 interrupts = <48>;
320 };
321
322 sdhc@d800a000 {
323 compatible = "wm,wm8505-sdhc";
324 reg = <0xd800a000 0x1000>;
325 interrupts = <20 21>;
326 clocks = <&clksdhc>;
327 bus-width = <4>;
328 sdon-inverted;
329 };
330
331 i2c_0: i2c@d8280000 {
332 compatible = "wm,wm8505-i2c";
333 reg = <0xd8280000 0x1000>;
334 interrupts = <19>;
335 clocks = <&clki2c0>;
336 clock-frequency = <400000>;
337 };
338
339 i2c_1: i2c@d8320000 {
340 compatible = "wm,wm8505-i2c";
341 reg = <0xd8320000 0x1000>;
342 interrupts = <18>;
343 clocks = <&clki2c1>;
344 clock-frequency = <400000>;
345 };
346 };
347};