1/*
  2 * pxa2xx.dtsi - Device Tree Include file for Marvell PXA2xx family SoC
  3 *
  4 * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
  5 *
  6 * Licensed under GPLv2 or later.
  7 */
  8
  9#include "skeleton.dtsi"
 10#include "dt-bindings/clock/pxa-clock.h"
 11
 12/ {
 13	model = "Marvell PXA2xx family SoC";
 14	compatible = "marvell,pxa2xx";
 15	interrupt-parent = <&pxairq>;
 16
 17	aliases {
 18		serial0 = &ffuart;
 19		serial1 = &btuart;
 20		serial2 = &stuart;
 21		serial3 = &hwuart;
 22		i2c0 = &pwri2c;
 23		i2c1 = &pxai2c1;
 24	};
 25
 26	cpus {
 27		#address-cells = <0>;
 28		#size-cells = <0>;
 29		cpu {
 30			compatible = "marvell,xscale";
 31			device_type = "cpu";
 32		};
 33	};
 34
 35	pxabus {
 36		compatible = "simple-bus";
 37		#address-cells = <1>;
 38		#size-cells = <1>;
 39		ranges;
 40
 41		pxairq: interrupt-controller@40d00000 {
 42			#interrupt-cells = <1>;
 43			compatible = "marvell,pxa-intc";
 44			interrupt-controller;
 45			interrupt-parent;
 46			marvell,intc-nr-irqs = <32>;
 47			reg = <0x40d00000 0xd0>;
 48		};
 49
 50		gpio: gpio@40e00000 {
 51			compatible = "mrvl,pxa-gpio";
 52			#address-cells = <0x1>;
 53			#size-cells = <0x1>;
 54			reg = <0x40e00000 0x10000>;
 55			gpio-controller;
 56			#gpio-cells = <0x2>;
 57			interrupts = <8>, <9>, <10>;
 58			interrupt-names = "gpio0", "gpio1", "gpio_mux";
 59			interrupt-controller;
 60			#interrupt-cells = <0x2>;
 61			ranges;
 62
 63			gcb0: gpio@40e00000 {
 64				reg = <0x40e00000 0x4>;
 65			};
 66
 67			gcb1: gpio@40e00004 {
 68				reg = <0x40e00004 0x4>;
 69			};
 70
 71			gcb2: gpio@40e00008 {
 72				reg = <0x40e00008 0x4>;
 73			};
 74			gcb3: gpio@40e0000c {
 75				reg = <0x40e0000c 0x4>;
 76			};
 77		};
 78
 79		ffuart: uart@40100000 {
 80			compatible = "mrvl,pxa-uart";
 81			reg = <0x40100000 0x30>;
 82			interrupts = <22>;
 83			clocks = <&clks CLK_FFUART>;
 84			status = "disabled";
 85		};
 86
 87		btuart: uart@40200000 {
 88			compatible = "mrvl,pxa-uart";
 89			reg = <0x40200000 0x30>;
 90			interrupts = <21>;
 91			clocks = <&clks CLK_BTUART>;
 92			status = "disabled";
 93		};
 94
 95		stuart: uart@40700000 {
 96			compatible = "mrvl,pxa-uart";
 97			reg = <0x40700000 0x30>;
 98			interrupts = <20>;
 99			clocks = <&clks CLK_STUART>;
100			status = "disabled";
101		};
102
103		hwuart: uart@41100000 {
104			compatible = "mrvl,pxa-uart";
105			reg = <0x41100000 0x30>;
106			interrupts = <7>;
107			status = "disabled";
108		};
109
110		pxai2c1: i2c@40301680 {
111			compatible = "mrvl,pxa-i2c";
112			reg = <0x40301680 0x30>;
113			interrupts = <18>;
114			clocks = <&clks CLK_I2C>;
115			#address-cells = <0x1>;
116			#size-cells = <0>;
117			status = "disabled";
118		};
119
120		usb0: ohci@4c000000 {
121			compatible = "marvell,pxa-ohci";
122			reg = <0x4c000000 0x10000>;
123			interrupts = <3>;
124			status = "disabled";
125		};
126
127		mmc0: mmc@41100000 {
128			compatible = "marvell,pxa-mmc";
129			reg = <0x41100000 0x1000>;
130			interrupts = <23>;
131			clocks = <&clks CLK_MMC>;
132			dmas = <&pdma 21 3
133				&pdma 22 3>;
134			dma-names = "rx", "tx";
135			status = "disabled";
136		};
137
138		rtc@40900000 {
139			compatible = "marvell,pxa-rtc";
140			reg = <0x40900000 0x3c>;
141			interrupts = <30 31>;
142		};
143
144		lcd-controller@40500000 {
145			compatible = "marvell,pxa2xx-lcdc";
146			reg = <0x44000000 0x10000>;
147			interrupts = <17>;
148			clocks = <&clks CLK_LCD>;
149			status = "disabled";
150		};
151	};
152};