Loading...
Note: File does not exist in v6.13.7.
1/*
2 * Copyright 2013 Freescale Semiconductor, Inc.
3 *
4 * Author: Fabio Estevam <fabio.estevam@freescale.com>
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 *
10 */
11
12/ {
13 aliases {
14 backlight = &backlight;
15 panelchan = &panelchan;
16 panel7 = &panel7;
17 touchscreenp7 = &touchscreenp7;
18 };
19
20 chosen {
21 stdout-path = &uart2;
22 };
23
24 backlight: backlight {
25 compatible = "gpio-backlight";
26 gpios = <&gpio1 4 0>;
27 default-on;
28 status = "disabled";
29 };
30
31 gpio-poweroff {
32 compatible = "gpio-poweroff";
33 gpios = <&gpio2 4 0>;
34 pinctrl-0 = <&pinctrl_power_off>;
35 pinctrl-names = "default";
36 };
37
38 memory@10000000 {
39 reg = <0x10000000 0x40000000>;
40 };
41
42 panel7: panel7 {
43 /*
44 * in reality it is a -20t (parallel) model,
45 * but with LVDS bridge chip attached,
46 * so it is equivalent to -19t model in drive
47 * characteristics
48 */
49 compatible = "urt,umsh-8596md-19t";
50 pinctrl-names = "default";
51 pinctrl-0 = <&pinctrl_panel>;
52 power-supply = <®_panel>;
53 backlight = <&backlight>;
54 status = "disabled";
55
56 port {
57 panel_in: endpoint {
58 remote-endpoint = <&lvds0_out>;
59 };
60 };
61 };
62
63 regulators {
64 compatible = "simple-bus";
65 #address-cells = <1>;
66 #size-cells = <0>;
67
68 reg_usb_h1_vbus: regulator@0 {
69 compatible = "regulator-fixed";
70 reg = <0>;
71 regulator-name = "usb_h1_vbus";
72 regulator-min-microvolt = <5000000>;
73 regulator-max-microvolt = <5000000>;
74 enable-active-high;
75 startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */
76 gpio = <&gpio7 12 0>;
77 };
78
79 reg_panel: regulator@1 {
80 compatible = "regulator-fixed";
81 reg = <1>;
82 regulator-name = "lcd_panel";
83 enable-active-high;
84 gpio = <&gpio1 2 0>;
85 };
86 };
87
88 sound {
89 compatible = "fsl,imx6q-udoo-ac97",
90 "fsl,imx-audio-ac97";
91 model = "fsl,imx6q-udoo-ac97";
92 audio-cpu = <&ssi1>;
93 audio-routing =
94 "RX", "Mic Jack",
95 "Headphone Jack", "TX";
96 mux-int-port = <1>;
97 mux-ext-port = <6>;
98 };
99};
100
101&fec {
102 pinctrl-names = "default";
103 pinctrl-0 = <&pinctrl_enet>;
104 phy-mode = "rgmii";
105 status = "okay";
106};
107
108&hdmi {
109 ddc-i2c-bus = <&i2c2>;
110 status = "okay";
111};
112
113&i2c2 {
114 clock-frequency = <100000>;
115 pinctrl-names = "default";
116 pinctrl-0 = <&pinctrl_i2c2>;
117 status = "okay";
118};
119
120&i2c3 {
121 clock-frequency = <100000>;
122 pinctrl-names = "default";
123 pinctrl-0 = <&pinctrl_i2c3>;
124 status = "okay";
125
126 touchscreenp7: touchscreenp7@55 {
127 compatible = "sitronix,st1232";
128 pinctrl-names = "default";
129 pinctrl-0 = <&pinctrl_touchscreenp7>;
130 reg = <0x55>;
131 interrupt-parent = <&gpio1>;
132 interrupts = <13 8>;
133 gpios = <&gpio1 15 0>;
134 status = "disabled";
135 };
136};
137
138&iomuxc {
139 imx6q-udoo {
140 pinctrl_enet: enetgrp {
141 fsl,pins = <
142 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
143 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
144 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
145 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
146 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
147 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
148 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
149 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
150 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
151 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
152 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
153 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
154 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
155 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
156 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
157 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
158 >;
159 };
160
161 pinctrl_i2c2: i2c2grp {
162 fsl,pins = <
163 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
164 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
165 >;
166 };
167
168 pinctrl_i2c3: i2c3grp {
169 fsl,pins = <
170 MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001f8b1
171 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001f8b1
172 >;
173 };
174
175 pinctrl_panel: panelgrp {
176 fsl,pins = <
177 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x70
178 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x70
179 >;
180 };
181
182 pinctrl_power_off: poweroffgrp {
183 fsl,pins = <
184 MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x30
185 >;
186 };
187
188 pinctrl_touchscreenp7: touchscreenp7grp {
189 fsl,pins = <
190 MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x70
191 MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0
192 >;
193 };
194
195 pinctrl_uart2: uart2grp {
196 fsl,pins = <
197 MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
198 MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
199 >;
200 };
201
202 pinctrl_usbh: usbhgrp {
203 fsl,pins = <
204 MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000
205 MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0
206 >;
207 };
208
209 pinctrl_usdhc3: usdhc3grp {
210 fsl,pins = <
211 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
212 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
213 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
214 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
215 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
216 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
217 >;
218 };
219
220 pinctrl_ac97_running: ac97running {
221 fsl,pins = <
222 MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x1b0b0
223 MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x1b0b0
224 MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x13080
225 MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x13080
226 MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
227 >;
228 };
229
230 pinctrl_ac97_warm_reset: ac97warmreset {
231 fsl,pins = <
232 MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x1b0b0
233 MX6QDL_PAD_DI0_PIN3__GPIO4_IO19 0x1b0b0
234 MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x13080
235 MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x13080
236 MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
237 >;
238 };
239
240 pinctrl_ac97_reset: ac97reset {
241 fsl,pins = <
242 MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0
243 MX6QDL_PAD_DI0_PIN3__GPIO4_IO19 0x1b0b0
244 MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x13080
245 MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x13080
246 MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
247 >;
248 };
249 };
250};
251
252&ldb {
253 status = "okay";
254
255 panelchan: lvds-channel@0 {
256 port@4 {
257 reg = <4>;
258
259 lvds0_out: endpoint {
260 remote-endpoint = <&panel_in>;
261 };
262 };
263 };
264};
265
266&uart2 {
267 pinctrl-names = "default";
268 pinctrl-0 = <&pinctrl_uart2>;
269 status = "okay";
270};
271
272&usbh1 {
273 pinctrl-names = "default";
274 pinctrl-0 = <&pinctrl_usbh>;
275 vbus-supply = <®_usb_h1_vbus>;
276 clocks = <&clks IMX6QDL_CLK_CKO>;
277 status = "okay";
278};
279
280&usdhc3 {
281 pinctrl-names = "default";
282 pinctrl-0 = <&pinctrl_usdhc3>;
283 non-removable;
284 status = "okay";
285};
286
287&audmux {
288 status = "okay";
289};
290
291&ssi1 {
292 cell-index = <0>;
293 fsl,mode = "ac97-slave";
294 pinctrl-names = "ac97-running", "ac97-reset", "ac97-warm-reset";
295 pinctrl-0 = <&pinctrl_ac97_running>;
296 pinctrl-1 = <&pinctrl_ac97_reset>;
297 pinctrl-2 = <&pinctrl_ac97_warm_reset>;
298 ac97-gpios = <&gpio4 19 0 &gpio4 18 0 &gpio2 30 0>;
299 status = "okay";
300};