Linux Audio

Check our new training course

Loading...
v6.13.7
  1// SPDX-License-Identifier: GPL-2.0-only
  2/*
  3 * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
 
 
 
 
  4 */
  5
  6#include <linux/kernel.h>
  7#include <linux/mm.h>
 
  8#include <linux/memblock.h>
  9#ifdef CONFIG_BLK_DEV_INITRD
 10#include <linux/initrd.h>
 11#endif
 12#include <linux/of_fdt.h>
 13#include <linux/swap.h>
 14#include <linux/module.h>
 15#include <linux/highmem.h>
 16#include <asm/page.h>
 
 17#include <asm/sections.h>
 18#include <asm/setup.h>
 19#include <asm/arcregs.h>
 20
 21pgd_t swapper_pg_dir[PTRS_PER_PGD] __aligned(PAGE_SIZE);
 22char empty_zero_page[PAGE_SIZE] __aligned(PAGE_SIZE);
 23EXPORT_SYMBOL(empty_zero_page);
 24
 25static const unsigned long low_mem_start = CONFIG_LINUX_RAM_BASE;
 26static unsigned long low_mem_sz;
 27
 28#ifdef CONFIG_HIGHMEM
 29static unsigned long min_high_pfn, max_high_pfn;
 30static phys_addr_t high_mem_start;
 31static phys_addr_t high_mem_sz;
 32unsigned long arch_pfn_offset;
 33EXPORT_SYMBOL(arch_pfn_offset);
 
 
 
 34#endif
 35
 36long __init arc_get_mem_sz(void)
 37{
 38	return low_mem_sz;
 39}
 40
 41/* User can over-ride above with "mem=nnn[KkMm]" in cmdline */
 42static int __init setup_mem_sz(char *str)
 43{
 44	low_mem_sz = memparse(str, NULL) & PAGE_MASK;
 45
 46	/* early console might not be setup yet - it will show up later */
 47	pr_info("\"mem=%s\": mem sz set to %ldM\n", str, TO_MB(low_mem_sz));
 48
 49	return 0;
 50}
 51early_param("mem", setup_mem_sz);
 52
 53void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 54{
 55	int in_use = 0;
 56
 57	if (!low_mem_sz) {
 58		if (base != low_mem_start)
 59			panic("CONFIG_LINUX_RAM_BASE != DT memory { }");
 60
 61		low_mem_sz = size;
 62		in_use = 1;
 63		memblock_add_node(base, size, 0, MEMBLOCK_NONE);
 64	} else {
 65#ifdef CONFIG_HIGHMEM
 66		high_mem_start = base;
 67		high_mem_sz = size;
 68		in_use = 1;
 69		memblock_add_node(base, size, 1, MEMBLOCK_NONE);
 70		memblock_reserve(base, size);
 71#endif
 72	}
 73
 74	pr_info("Memory @ %llx [%lldM] %s\n",
 75		base, TO_MB(size), !in_use ? "Not used":"");
 76}
 77
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 78/*
 79 * First memory setup routine called from setup_arch()
 80 * 1. setup swapper's mm @init_mm
 81 * 2. Count the pages we have and setup bootmem allocator
 82 * 3. zone setup
 83 */
 84void __init setup_arch_memory(void)
 85{
 86	unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0 };
 
 87
 88	setup_initial_init_mm(_text, _etext, _edata, _end);
 
 
 
 89
 90	/* first page of system - kernel .vector starts here */
 91	min_low_pfn = virt_to_pfn((void *)CONFIG_LINUX_RAM_BASE);
 92
 93	/* Last usable page of low mem */
 94	max_low_pfn = max_pfn = PFN_DOWN(low_mem_start + low_mem_sz);
 95
 
 
 
 
 
 96	/*------------- bootmem allocator setup -----------------------*/
 97
 98	/*
 99	 * seed the bootmem allocator after any DT memory node parsing or
100	 * "mem=xxx" cmdline overrides have potentially updated @arc_mem_sz
101	 *
102	 * Only low mem is added, otherwise we have crashes when allocating
103	 * mem_map[] itself. NO_BOOTMEM allocates mem_map[] at the end of
104	 * avail memory, ending in highmem with a > 32-bit address. However
105	 * it then tries to memset it with a truncaed 32-bit handle, causing
106	 * the crash
107	 */
108
109	memblock_reserve(CONFIG_LINUX_LINK_BASE,
110			 __pa(_end) - CONFIG_LINUX_LINK_BASE);
111
112#ifdef CONFIG_BLK_DEV_INITRD
113	if (phys_initrd_size) {
114		memblock_reserve(phys_initrd_start, phys_initrd_size);
115		initrd_start = (unsigned long)__va(phys_initrd_start);
116		initrd_end = initrd_start + phys_initrd_size;
117	}
118#endif
119
120	early_init_fdt_reserve_self();
121	early_init_fdt_scan_reserved_mem();
122
123	memblock_dump_all();
124
125	/*----------------- node/zones setup --------------------------*/
126	max_zone_pfn[ZONE_NORMAL] = max_low_pfn;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
127
128#ifdef CONFIG_HIGHMEM
129	/*
 
 
130	 * On ARC (w/o PAE) HIGHMEM addresses are actually smaller (0 based)
131	 * than addresses in normal aka low memory (0x8000_0000 based).
132	 * Even with PAE, the huge peripheral space hole would waste a lot of
133	 * mem with single contiguous mem_map[].
134	 * Thus when HIGHMEM on ARC is enabled the memory map corresponding
135	 * to the hole is freed and ARC specific version of pfn_valid()
136	 * handles the hole in the memory map.
 
137	 */
 
138
139	min_high_pfn = PFN_DOWN(high_mem_start);
140	max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
141
142	/*
143	 * max_high_pfn should be ok here for both HIGHMEM and HIGHMEM+PAE.
144	 * For HIGHMEM without PAE max_high_pfn should be less than
145	 * min_low_pfn to guarantee that these two regions don't overlap.
146	 * For PAE case highmem is greater than lowmem, so it is natural
147	 * to use max_high_pfn.
148	 *
149	 * In both cases, holes should be handled by pfn_valid().
150	 */
151	max_zone_pfn[ZONE_HIGHMEM] = max_high_pfn;
152
153	high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
154
155	arch_pfn_offset = min(min_low_pfn, min_high_pfn);
156	kmap_init();
157
158#else /* CONFIG_HIGHMEM */
159	/* pfn_valid() uses this when FLATMEM=y and HIGHMEM=n */
160	max_mapnr = max_low_pfn - min_low_pfn;
161
162#endif /* CONFIG_HIGHMEM */
163
164	free_area_init(max_zone_pfn);
 
 
165}
166
167static void __init highmem_init(void)
 
 
 
 
 
 
168{
169#ifdef CONFIG_HIGHMEM
170	unsigned long tmp;
171
172	memblock_phys_free(high_mem_start, high_mem_sz);
173	for (tmp = min_high_pfn; tmp < max_high_pfn; tmp++)
174		free_highmem_page(pfn_to_page(tmp));
175#endif
 
 
 
176}
177
178/*
179 * mem_init - initializes memory
180 *
181 * Frees up bootmem
182 * Calculates and displays memory available/used
183 */
184void __init mem_init(void)
185{
186	memblock_free_all();
187	highmem_init();
188
189	BUILD_BUG_ON((PTRS_PER_PGD * sizeof(pgd_t)) > PAGE_SIZE);
190	BUILD_BUG_ON((PTRS_PER_PUD * sizeof(pud_t)) > PAGE_SIZE);
191	BUILD_BUG_ON((PTRS_PER_PMD * sizeof(pmd_t)) > PAGE_SIZE);
192	BUILD_BUG_ON((PTRS_PER_PTE * sizeof(pte_t)) > PAGE_SIZE);
193}
194
195#ifdef CONFIG_HIGHMEM
196int pfn_valid(unsigned long pfn)
197{
198	return (pfn >= min_high_pfn && pfn <= max_high_pfn) ||
199		(pfn >= min_low_pfn && pfn <= max_low_pfn);
200}
201EXPORT_SYMBOL(pfn_valid);
202#endif
v4.17
 
  1/*
  2 * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
  3 *
  4 * This program is free software; you can redistribute it and/or modify
  5 * it under the terms of the GNU General Public License version 2 as
  6 * published by the Free Software Foundation.
  7 */
  8
  9#include <linux/kernel.h>
 10#include <linux/mm.h>
 11#include <linux/bootmem.h>
 12#include <linux/memblock.h>
 13#ifdef CONFIG_BLK_DEV_INITRD
 14#include <linux/initrd.h>
 15#endif
 16#include <linux/of_fdt.h>
 17#include <linux/swap.h>
 18#include <linux/module.h>
 19#include <linux/highmem.h>
 20#include <asm/page.h>
 21#include <asm/pgalloc.h>
 22#include <asm/sections.h>
 
 23#include <asm/arcregs.h>
 24
 25pgd_t swapper_pg_dir[PTRS_PER_PGD] __aligned(PAGE_SIZE);
 26char empty_zero_page[PAGE_SIZE] __aligned(PAGE_SIZE);
 27EXPORT_SYMBOL(empty_zero_page);
 28
 29static const unsigned long low_mem_start = CONFIG_LINUX_RAM_BASE;
 30static unsigned long low_mem_sz;
 31
 32#ifdef CONFIG_HIGHMEM
 33static unsigned long min_high_pfn, max_high_pfn;
 34static u64 high_mem_start;
 35static u64 high_mem_sz;
 36#endif
 37
 38#ifdef CONFIG_DISCONTIGMEM
 39struct pglist_data node_data[MAX_NUMNODES] __read_mostly;
 40EXPORT_SYMBOL(node_data);
 41#endif
 42
 43long __init arc_get_mem_sz(void)
 44{
 45	return low_mem_sz;
 46}
 47
 48/* User can over-ride above with "mem=nnn[KkMm]" in cmdline */
 49static int __init setup_mem_sz(char *str)
 50{
 51	low_mem_sz = memparse(str, NULL) & PAGE_MASK;
 52
 53	/* early console might not be setup yet - it will show up later */
 54	pr_info("\"mem=%s\": mem sz set to %ldM\n", str, TO_MB(low_mem_sz));
 55
 56	return 0;
 57}
 58early_param("mem", setup_mem_sz);
 59
 60void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 61{
 62	int in_use = 0;
 63
 64	if (!low_mem_sz) {
 65		if (base != low_mem_start)
 66			panic("CONFIG_LINUX_RAM_BASE != DT memory { }");
 67
 68		low_mem_sz = size;
 69		in_use = 1;
 
 70	} else {
 71#ifdef CONFIG_HIGHMEM
 72		high_mem_start = base;
 73		high_mem_sz = size;
 74		in_use = 1;
 
 
 75#endif
 76	}
 77
 78	pr_info("Memory @ %llx [%lldM] %s\n",
 79		base, TO_MB(size), !in_use ? "Not used":"");
 80}
 81
 82#ifdef CONFIG_BLK_DEV_INITRD
 83static int __init early_initrd(char *p)
 84{
 85	unsigned long start, size;
 86	char *endp;
 87
 88	start = memparse(p, &endp);
 89	if (*endp == ',') {
 90		size = memparse(endp + 1, NULL);
 91
 92		initrd_start = (unsigned long)__va(start);
 93		initrd_end = (unsigned long)__va(start + size);
 94	}
 95	return 0;
 96}
 97early_param("initrd", early_initrd);
 98#endif
 99
100/*
101 * First memory setup routine called from setup_arch()
102 * 1. setup swapper's mm @init_mm
103 * 2. Count the pages we have and setup bootmem allocator
104 * 3. zone setup
105 */
106void __init setup_arch_memory(void)
107{
108	unsigned long zones_size[MAX_NR_ZONES];
109	unsigned long zones_holes[MAX_NR_ZONES];
110
111	init_mm.start_code = (unsigned long)_text;
112	init_mm.end_code = (unsigned long)_etext;
113	init_mm.end_data = (unsigned long)_edata;
114	init_mm.brk = (unsigned long)_end;
115
116	/* first page of system - kernel .vector starts here */
117	min_low_pfn = ARCH_PFN_OFFSET;
118
119	/* Last usable page of low mem */
120	max_low_pfn = max_pfn = PFN_DOWN(low_mem_start + low_mem_sz);
121
122#ifdef CONFIG_FLATMEM
123	/* pfn_valid() uses this */
124	max_mapnr = max_low_pfn - min_low_pfn;
125#endif
126
127	/*------------- bootmem allocator setup -----------------------*/
128
129	/*
130	 * seed the bootmem allocator after any DT memory node parsing or
131	 * "mem=xxx" cmdline overrides have potentially updated @arc_mem_sz
132	 *
133	 * Only low mem is added, otherwise we have crashes when allocating
134	 * mem_map[] itself. NO_BOOTMEM allocates mem_map[] at the end of
135	 * avail memory, ending in highmem with a > 32-bit address. However
136	 * it then tries to memset it with a truncaed 32-bit handle, causing
137	 * the crash
138	 */
139
140	memblock_add_node(low_mem_start, low_mem_sz, 0);
141	memblock_reserve(low_mem_start, __pa(_end) - low_mem_start);
142
143#ifdef CONFIG_BLK_DEV_INITRD
144	if (initrd_start)
145		memblock_reserve(__pa(initrd_start), initrd_end - initrd_start);
 
 
 
146#endif
147
148	early_init_fdt_reserve_self();
149	early_init_fdt_scan_reserved_mem();
150
151	memblock_dump_all();
152
153	/*----------------- node/zones setup --------------------------*/
154	memset(zones_size, 0, sizeof(zones_size));
155	memset(zones_holes, 0, sizeof(zones_holes));
156
157	zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn;
158	zones_holes[ZONE_NORMAL] = 0;
159
160	/*
161	 * We can't use the helper free_area_init(zones[]) because it uses
162	 * PAGE_OFFSET to compute the @min_low_pfn which would be wrong
163	 * when our kernel doesn't start at PAGE_OFFSET, i.e.
164	 * PAGE_OFFSET != CONFIG_LINUX_RAM_BASE
165	 */
166	free_area_init_node(0,			/* node-id */
167			    zones_size,		/* num pages per zone */
168			    min_low_pfn,	/* first pfn of node */
169			    zones_holes);	/* holes */
170
171#ifdef CONFIG_HIGHMEM
172	/*
173	 * Populate a new node with highmem
174	 *
175	 * On ARC (w/o PAE) HIGHMEM addresses are actually smaller (0 based)
176	 * than addresses in normal ala low memory (0x8000_0000 based).
177	 * Even with PAE, the huge peripheral space hole would waste a lot of
178	 * mem with single mem_map[]. This warrants a mem_map per region design.
179	 * Thus HIGHMEM on ARC is imlemented with DISCONTIGMEM.
180	 *
181	 * DISCONTIGMEM in turns requires multiple nodes. node 0 above is
182	 * populated with normal memory zone while node 1 only has highmem
183	 */
184	node_set_online(1);
185
186	min_high_pfn = PFN_DOWN(high_mem_start);
187	max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
188
189	zones_size[ZONE_NORMAL] = 0;
190	zones_holes[ZONE_NORMAL] = 0;
 
 
 
 
 
 
 
 
191
192	zones_size[ZONE_HIGHMEM] = max_high_pfn - min_high_pfn;
193	zones_holes[ZONE_HIGHMEM] = 0;
 
 
194
195	free_area_init_node(1,			/* node-id */
196			    zones_size,		/* num pages per zone */
197			    min_high_pfn,	/* first pfn of node */
198			    zones_holes);	/* holes */
 
199
200	high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
201	kmap_init();
202#endif
203}
204
205/*
206 * mem_init - initializes memory
207 *
208 * Frees up bootmem
209 * Calculates and displays memory available/used
210 */
211void __init mem_init(void)
212{
213#ifdef CONFIG_HIGHMEM
214	unsigned long tmp;
215
216	reset_all_zones_managed_pages();
217	for (tmp = min_high_pfn; tmp < max_high_pfn; tmp++)
218		free_highmem_page(pfn_to_page(tmp));
219#endif
220
221	free_all_bootmem();
222	mem_init_print_info(NULL);
223}
224
225/*
226 * free_initmem: Free all the __init memory.
 
 
 
227 */
228void __ref free_initmem(void)
229{
230	free_initmem_default(-1);
 
 
 
 
 
 
231}
232
233#ifdef CONFIG_BLK_DEV_INITRD
234void __init free_initrd_mem(unsigned long start, unsigned long end)
235{
236	free_reserved_area((void *)start, (void *)end, -1, "initrd");
 
237}
 
238#endif