Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * "RTT as Real Time Clock" driver for AT91SAM9 SoC family
4 *
5 * (C) 2007 Michel Benoit
6 *
7 * Based on rtc-at91rm9200.c by Rick Bronson
8 */
9
10#include <linux/clk.h>
11#include <linux/interrupt.h>
12#include <linux/ioctl.h>
13#include <linux/io.h>
14#include <linux/kernel.h>
15#include <linux/mfd/syscon.h>
16#include <linux/module.h>
17#include <linux/of.h>
18#include <linux/platform_device.h>
19#include <linux/regmap.h>
20#include <linux/rtc.h>
21#include <linux/slab.h>
22#include <linux/suspend.h>
23#include <linux/time.h>
24
25/*
26 * This driver uses two configurable hardware resources that live in the
27 * AT91SAM9 backup power domain (intended to be powered at all times)
28 * to implement the Real Time Clock interfaces
29 *
30 * - A "Real-time Timer" (RTT) counts up in seconds from a base time.
31 * We can't assign the counter value (CRTV) ... but we can reset it.
32 *
33 * - One of the "General Purpose Backup Registers" (GPBRs) holds the
34 * base time, normally an offset from the beginning of the POSIX
35 * epoch (1970-Jan-1 00:00:00 UTC). Some systems also include the
36 * local timezone's offset.
37 *
38 * The RTC's value is the RTT counter plus that offset. The RTC's alarm
39 * is likewise a base (ALMV) plus that offset.
40 *
41 * Not all RTTs will be used as RTCs; some systems have multiple RTTs to
42 * choose from, or a "real" RTC module. All systems have multiple GPBR
43 * registers available, likewise usable for more than "RTC" support.
44 */
45
46#define AT91_RTT_MR 0x00 /* Real-time Mode Register */
47#define AT91_RTT_RTPRES (0xffff << 0) /* Timer Prescaler Value */
48#define AT91_RTT_ALMIEN BIT(16) /* Alarm Interrupt Enable */
49#define AT91_RTT_RTTINCIEN BIT(17) /* Increment Interrupt Enable */
50#define AT91_RTT_RTTRST BIT(18) /* Timer Restart */
51
52#define AT91_RTT_AR 0x04 /* Real-time Alarm Register */
53#define AT91_RTT_ALMV (0xffffffff) /* Alarm Value */
54
55#define AT91_RTT_VR 0x08 /* Real-time Value Register */
56#define AT91_RTT_CRTV (0xffffffff) /* Current Real-time Value */
57
58#define AT91_RTT_SR 0x0c /* Real-time Status Register */
59#define AT91_RTT_ALMS BIT(0) /* Alarm Status */
60#define AT91_RTT_RTTINC BIT(1) /* Timer Increment */
61
62/*
63 * We store ALARM_DISABLED in ALMV to record that no alarm is set.
64 * It's also the reset value for that field.
65 */
66#define ALARM_DISABLED ((u32)~0)
67
68struct sam9_rtc {
69 void __iomem *rtt;
70 struct rtc_device *rtcdev;
71 u32 imr;
72 struct regmap *gpbr;
73 unsigned int gpbr_offset;
74 int irq;
75 struct clk *sclk;
76 bool suspended;
77 unsigned long events;
78 spinlock_t lock;
79};
80
81#define rtt_readl(rtc, field) \
82 readl((rtc)->rtt + AT91_RTT_ ## field)
83#define rtt_writel(rtc, field, val) \
84 writel((val), (rtc)->rtt + AT91_RTT_ ## field)
85
86static inline unsigned int gpbr_readl(struct sam9_rtc *rtc)
87{
88 unsigned int val;
89
90 regmap_read(rtc->gpbr, rtc->gpbr_offset, &val);
91
92 return val;
93}
94
95static inline void gpbr_writel(struct sam9_rtc *rtc, unsigned int val)
96{
97 regmap_write(rtc->gpbr, rtc->gpbr_offset, val);
98}
99
100/*
101 * Read current time and date in RTC
102 */
103static int at91_rtc_readtime(struct device *dev, struct rtc_time *tm)
104{
105 struct sam9_rtc *rtc = dev_get_drvdata(dev);
106 u32 secs, secs2;
107 u32 offset;
108
109 /* read current time offset */
110 offset = gpbr_readl(rtc);
111 if (offset == 0)
112 return -EILSEQ;
113
114 /* reread the counter to help sync the two clock domains */
115 secs = rtt_readl(rtc, VR);
116 secs2 = rtt_readl(rtc, VR);
117 if (secs != secs2)
118 secs = rtt_readl(rtc, VR);
119
120 rtc_time64_to_tm(offset + secs, tm);
121
122 dev_dbg(dev, "%s: %ptR\n", __func__, tm);
123
124 return 0;
125}
126
127/*
128 * Set current time and date in RTC
129 */
130static int at91_rtc_settime(struct device *dev, struct rtc_time *tm)
131{
132 struct sam9_rtc *rtc = dev_get_drvdata(dev);
133 u32 offset, alarm, mr;
134 unsigned long secs;
135
136 dev_dbg(dev, "%s: %ptR\n", __func__, tm);
137
138 secs = rtc_tm_to_time64(tm);
139
140 mr = rtt_readl(rtc, MR);
141
142 /* disable interrupts */
143 rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
144
145 /* read current time offset */
146 offset = gpbr_readl(rtc);
147
148 /* store the new base time in a battery backup register */
149 secs += 1;
150 gpbr_writel(rtc, secs);
151
152 /* adjust the alarm time for the new base */
153 alarm = rtt_readl(rtc, AR);
154 if (alarm != ALARM_DISABLED) {
155 if (offset > secs) {
156 /* time jumped backwards, increase time until alarm */
157 alarm += (offset - secs);
158 } else if ((alarm + offset) > secs) {
159 /* time jumped forwards, decrease time until alarm */
160 alarm -= (secs - offset);
161 } else {
162 /* time jumped past the alarm, disable alarm */
163 alarm = ALARM_DISABLED;
164 mr &= ~AT91_RTT_ALMIEN;
165 }
166 rtt_writel(rtc, AR, alarm);
167 }
168
169 /* reset the timer, and re-enable interrupts */
170 rtt_writel(rtc, MR, mr | AT91_RTT_RTTRST);
171
172 return 0;
173}
174
175static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
176{
177 struct sam9_rtc *rtc = dev_get_drvdata(dev);
178 struct rtc_time *tm = &alrm->time;
179 u32 alarm = rtt_readl(rtc, AR);
180 u32 offset;
181
182 offset = gpbr_readl(rtc);
183 if (offset == 0)
184 return -EILSEQ;
185
186 memset(alrm, 0, sizeof(*alrm));
187 if (alarm != ALARM_DISABLED) {
188 rtc_time64_to_tm(offset + alarm, tm);
189
190 dev_dbg(dev, "%s: %ptR\n", __func__, tm);
191
192 if (rtt_readl(rtc, MR) & AT91_RTT_ALMIEN)
193 alrm->enabled = 1;
194 }
195
196 return 0;
197}
198
199static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
200{
201 struct sam9_rtc *rtc = dev_get_drvdata(dev);
202 struct rtc_time *tm = &alrm->time;
203 unsigned long secs;
204 u32 offset;
205 u32 mr;
206
207 secs = rtc_tm_to_time64(tm);
208
209 offset = gpbr_readl(rtc);
210 if (offset == 0) {
211 /* time is not set */
212 return -EILSEQ;
213 }
214 mr = rtt_readl(rtc, MR);
215 rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN);
216
217 /* alarm in the past? finish and leave disabled */
218 if (secs <= offset) {
219 rtt_writel(rtc, AR, ALARM_DISABLED);
220 return 0;
221 }
222
223 /* else set alarm and maybe enable it */
224 rtt_writel(rtc, AR, secs - offset);
225 if (alrm->enabled)
226 rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN);
227
228 dev_dbg(dev, "%s: %ptR\n", __func__, tm);
229
230 return 0;
231}
232
233static int at91_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
234{
235 struct sam9_rtc *rtc = dev_get_drvdata(dev);
236 u32 mr = rtt_readl(rtc, MR);
237
238 dev_dbg(dev, "alarm_irq_enable: enabled=%08x, mr %08x\n", enabled, mr);
239 if (enabled)
240 rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN);
241 else
242 rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN);
243 return 0;
244}
245
246/*
247 * Provide additional RTC information in /proc/driver/rtc
248 */
249static int at91_rtc_proc(struct device *dev, struct seq_file *seq)
250{
251 struct sam9_rtc *rtc = dev_get_drvdata(dev);
252 u32 mr = rtt_readl(rtc, MR);
253
254 seq_printf(seq, "update_IRQ\t: %s\n",
255 (mr & AT91_RTT_RTTINCIEN) ? "yes" : "no");
256 return 0;
257}
258
259static irqreturn_t at91_rtc_cache_events(struct sam9_rtc *rtc)
260{
261 u32 sr, mr;
262
263 /* Shared interrupt may be for another device. Note: reading
264 * SR clears it, so we must only read it in this irq handler!
265 */
266 mr = rtt_readl(rtc, MR) & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
267 sr = rtt_readl(rtc, SR) & (mr >> 16);
268 if (!sr)
269 return IRQ_NONE;
270
271 /* alarm status */
272 if (sr & AT91_RTT_ALMS)
273 rtc->events |= (RTC_AF | RTC_IRQF);
274
275 /* timer update/increment */
276 if (sr & AT91_RTT_RTTINC)
277 rtc->events |= (RTC_UF | RTC_IRQF);
278
279 return IRQ_HANDLED;
280}
281
282static void at91_rtc_flush_events(struct sam9_rtc *rtc)
283{
284 if (!rtc->events)
285 return;
286
287 rtc_update_irq(rtc->rtcdev, 1, rtc->events);
288 rtc->events = 0;
289
290 pr_debug("%s: num=%ld, events=0x%02lx\n", __func__,
291 rtc->events >> 8, rtc->events & 0x000000FF);
292}
293
294/*
295 * IRQ handler for the RTC
296 */
297static irqreturn_t at91_rtc_interrupt(int irq, void *_rtc)
298{
299 struct sam9_rtc *rtc = _rtc;
300 int ret;
301
302 spin_lock(&rtc->lock);
303
304 ret = at91_rtc_cache_events(rtc);
305
306 /* We're called in suspended state */
307 if (rtc->suspended) {
308 /* Mask irqs coming from this peripheral */
309 rtt_writel(rtc, MR,
310 rtt_readl(rtc, MR) &
311 ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
312 /* Trigger a system wakeup */
313 pm_system_wakeup();
314 } else {
315 at91_rtc_flush_events(rtc);
316 }
317
318 spin_unlock(&rtc->lock);
319
320 return ret;
321}
322
323static const struct rtc_class_ops at91_rtc_ops = {
324 .read_time = at91_rtc_readtime,
325 .set_time = at91_rtc_settime,
326 .read_alarm = at91_rtc_readalarm,
327 .set_alarm = at91_rtc_setalarm,
328 .proc = at91_rtc_proc,
329 .alarm_irq_enable = at91_rtc_alarm_irq_enable,
330};
331
332/*
333 * Initialize and install RTC driver
334 */
335static int at91_rtc_probe(struct platform_device *pdev)
336{
337 struct sam9_rtc *rtc;
338 int ret, irq;
339 u32 mr;
340 unsigned int sclk_rate;
341 struct of_phandle_args args;
342
343 irq = platform_get_irq(pdev, 0);
344 if (irq < 0)
345 return irq;
346
347 rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
348 if (!rtc)
349 return -ENOMEM;
350
351 spin_lock_init(&rtc->lock);
352 rtc->irq = irq;
353
354 /* platform setup code should have handled this; sigh */
355 if (!device_can_wakeup(&pdev->dev))
356 device_init_wakeup(&pdev->dev, 1);
357
358 platform_set_drvdata(pdev, rtc);
359
360 rtc->rtt = devm_platform_ioremap_resource(pdev, 0);
361 if (IS_ERR(rtc->rtt))
362 return PTR_ERR(rtc->rtt);
363
364 ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node,
365 "atmel,rtt-rtc-time-reg", 1, 0,
366 &args);
367 if (ret)
368 return ret;
369
370 rtc->gpbr = syscon_node_to_regmap(args.np);
371 of_node_put(args.np);
372 rtc->gpbr_offset = args.args[0];
373 if (IS_ERR(rtc->gpbr)) {
374 dev_err(&pdev->dev, "failed to retrieve gpbr regmap, aborting.\n");
375 return -ENOMEM;
376 }
377
378 rtc->sclk = devm_clk_get(&pdev->dev, NULL);
379 if (IS_ERR(rtc->sclk))
380 return PTR_ERR(rtc->sclk);
381
382 ret = clk_prepare_enable(rtc->sclk);
383 if (ret) {
384 dev_err(&pdev->dev, "Could not enable slow clock\n");
385 return ret;
386 }
387
388 sclk_rate = clk_get_rate(rtc->sclk);
389 if (!sclk_rate || sclk_rate > AT91_RTT_RTPRES) {
390 dev_err(&pdev->dev, "Invalid slow clock rate\n");
391 ret = -EINVAL;
392 goto err_clk;
393 }
394
395 mr = rtt_readl(rtc, MR);
396
397 /* unless RTT is counting at 1 Hz, re-initialize it */
398 if ((mr & AT91_RTT_RTPRES) != sclk_rate) {
399 mr = AT91_RTT_RTTRST | (sclk_rate & AT91_RTT_RTPRES);
400 gpbr_writel(rtc, 0);
401 }
402
403 /* disable all interrupts (same as on shutdown path) */
404 mr &= ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
405 rtt_writel(rtc, MR, mr);
406
407 rtc->rtcdev = devm_rtc_allocate_device(&pdev->dev);
408 if (IS_ERR(rtc->rtcdev)) {
409 ret = PTR_ERR(rtc->rtcdev);
410 goto err_clk;
411 }
412
413 rtc->rtcdev->ops = &at91_rtc_ops;
414 rtc->rtcdev->range_max = U32_MAX;
415
416 /* register irq handler after we know what name we'll use */
417 ret = devm_request_irq(&pdev->dev, rtc->irq, at91_rtc_interrupt,
418 IRQF_SHARED | IRQF_COND_SUSPEND,
419 dev_name(&rtc->rtcdev->dev), rtc);
420 if (ret) {
421 dev_dbg(&pdev->dev, "can't share IRQ %d?\n", rtc->irq);
422 goto err_clk;
423 }
424
425 /* NOTE: sam9260 rev A silicon has a ROM bug which resets the
426 * RTT on at least some reboots. If you have that chip, you must
427 * initialize the time from some external source like a GPS, wall
428 * clock, discrete RTC, etc
429 */
430
431 if (gpbr_readl(rtc) == 0)
432 dev_warn(&pdev->dev, "%s: SET TIME!\n",
433 dev_name(&rtc->rtcdev->dev));
434
435 return devm_rtc_register_device(rtc->rtcdev);
436
437err_clk:
438 clk_disable_unprepare(rtc->sclk);
439
440 return ret;
441}
442
443/*
444 * Disable and remove the RTC driver
445 */
446static void at91_rtc_remove(struct platform_device *pdev)
447{
448 struct sam9_rtc *rtc = platform_get_drvdata(pdev);
449 u32 mr = rtt_readl(rtc, MR);
450
451 /* disable all interrupts */
452 rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
453
454 clk_disable_unprepare(rtc->sclk);
455}
456
457static void at91_rtc_shutdown(struct platform_device *pdev)
458{
459 struct sam9_rtc *rtc = platform_get_drvdata(pdev);
460 u32 mr = rtt_readl(rtc, MR);
461
462 rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
463 rtt_writel(rtc, MR, mr & ~rtc->imr);
464}
465
466#ifdef CONFIG_PM_SLEEP
467
468/* AT91SAM9 RTC Power management control */
469
470static int at91_rtc_suspend(struct device *dev)
471{
472 struct sam9_rtc *rtc = dev_get_drvdata(dev);
473 u32 mr = rtt_readl(rtc, MR);
474
475 /*
476 * This IRQ is shared with DBGU and other hardware which isn't
477 * necessarily a wakeup event source.
478 */
479 rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
480 if (rtc->imr) {
481 if (device_may_wakeup(dev) && (mr & AT91_RTT_ALMIEN)) {
482 unsigned long flags;
483
484 enable_irq_wake(rtc->irq);
485 spin_lock_irqsave(&rtc->lock, flags);
486 rtc->suspended = true;
487 spin_unlock_irqrestore(&rtc->lock, flags);
488 /* don't let RTTINC cause wakeups */
489 if (mr & AT91_RTT_RTTINCIEN)
490 rtt_writel(rtc, MR, mr & ~AT91_RTT_RTTINCIEN);
491 } else {
492 rtt_writel(rtc, MR, mr & ~rtc->imr);
493 }
494 }
495
496 return 0;
497}
498
499static int at91_rtc_resume(struct device *dev)
500{
501 struct sam9_rtc *rtc = dev_get_drvdata(dev);
502 u32 mr;
503
504 if (rtc->imr) {
505 unsigned long flags;
506
507 if (device_may_wakeup(dev))
508 disable_irq_wake(rtc->irq);
509 mr = rtt_readl(rtc, MR);
510 rtt_writel(rtc, MR, mr | rtc->imr);
511
512 spin_lock_irqsave(&rtc->lock, flags);
513 rtc->suspended = false;
514 at91_rtc_cache_events(rtc);
515 at91_rtc_flush_events(rtc);
516 spin_unlock_irqrestore(&rtc->lock, flags);
517 }
518
519 return 0;
520}
521#endif
522
523static SIMPLE_DEV_PM_OPS(at91_rtc_pm_ops, at91_rtc_suspend, at91_rtc_resume);
524
525static const struct of_device_id at91_rtc_dt_ids[] = {
526 { .compatible = "atmel,at91sam9260-rtt" },
527 { /* sentinel */ }
528};
529MODULE_DEVICE_TABLE(of, at91_rtc_dt_ids);
530
531static struct platform_driver at91_rtc_driver = {
532 .probe = at91_rtc_probe,
533 .remove = at91_rtc_remove,
534 .shutdown = at91_rtc_shutdown,
535 .driver = {
536 .name = "rtc-at91sam9",
537 .pm = &at91_rtc_pm_ops,
538 .of_match_table = at91_rtc_dt_ids,
539 },
540};
541
542module_platform_driver(at91_rtc_driver);
543
544MODULE_AUTHOR("Michel Benoit");
545MODULE_DESCRIPTION("RTC driver for Atmel AT91SAM9x");
546MODULE_LICENSE("GPL");
1/*
2 * "RTT as Real Time Clock" driver for AT91SAM9 SoC family
3 *
4 * (C) 2007 Michel Benoit
5 *
6 * Based on rtc-at91rm9200.c by Rick Bronson
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * as published by the Free Software Foundation; either version
11 * 2 of the License, or (at your option) any later version.
12 */
13
14#include <linux/clk.h>
15#include <linux/interrupt.h>
16#include <linux/ioctl.h>
17#include <linux/io.h>
18#include <linux/kernel.h>
19#include <linux/mfd/syscon.h>
20#include <linux/module.h>
21#include <linux/of.h>
22#include <linux/platform_device.h>
23#include <linux/regmap.h>
24#include <linux/rtc.h>
25#include <linux/slab.h>
26#include <linux/suspend.h>
27#include <linux/time.h>
28
29/*
30 * This driver uses two configurable hardware resources that live in the
31 * AT91SAM9 backup power domain (intended to be powered at all times)
32 * to implement the Real Time Clock interfaces
33 *
34 * - A "Real-time Timer" (RTT) counts up in seconds from a base time.
35 * We can't assign the counter value (CRTV) ... but we can reset it.
36 *
37 * - One of the "General Purpose Backup Registers" (GPBRs) holds the
38 * base time, normally an offset from the beginning of the POSIX
39 * epoch (1970-Jan-1 00:00:00 UTC). Some systems also include the
40 * local timezone's offset.
41 *
42 * The RTC's value is the RTT counter plus that offset. The RTC's alarm
43 * is likewise a base (ALMV) plus that offset.
44 *
45 * Not all RTTs will be used as RTCs; some systems have multiple RTTs to
46 * choose from, or a "real" RTC module. All systems have multiple GPBR
47 * registers available, likewise usable for more than "RTC" support.
48 */
49
50#define AT91_RTT_MR 0x00 /* Real-time Mode Register */
51#define AT91_RTT_RTPRES (0xffff << 0) /* Real-time Timer Prescaler Value */
52#define AT91_RTT_ALMIEN (1 << 16) /* Alarm Interrupt Enable */
53#define AT91_RTT_RTTINCIEN (1 << 17) /* Real Time Timer Increment Interrupt Enable */
54#define AT91_RTT_RTTRST (1 << 18) /* Real Time Timer Restart */
55
56#define AT91_RTT_AR 0x04 /* Real-time Alarm Register */
57#define AT91_RTT_ALMV (0xffffffff) /* Alarm Value */
58
59#define AT91_RTT_VR 0x08 /* Real-time Value Register */
60#define AT91_RTT_CRTV (0xffffffff) /* Current Real-time Value */
61
62#define AT91_RTT_SR 0x0c /* Real-time Status Register */
63#define AT91_RTT_ALMS (1 << 0) /* Real-time Alarm Status */
64#define AT91_RTT_RTTINC (1 << 1) /* Real-time Timer Increment */
65
66/*
67 * We store ALARM_DISABLED in ALMV to record that no alarm is set.
68 * It's also the reset value for that field.
69 */
70#define ALARM_DISABLED ((u32)~0)
71
72
73struct sam9_rtc {
74 void __iomem *rtt;
75 struct rtc_device *rtcdev;
76 u32 imr;
77 struct regmap *gpbr;
78 unsigned int gpbr_offset;
79 int irq;
80 struct clk *sclk;
81 bool suspended;
82 unsigned long events;
83 spinlock_t lock;
84};
85
86#define rtt_readl(rtc, field) \
87 readl((rtc)->rtt + AT91_RTT_ ## field)
88#define rtt_writel(rtc, field, val) \
89 writel((val), (rtc)->rtt + AT91_RTT_ ## field)
90
91static inline unsigned int gpbr_readl(struct sam9_rtc *rtc)
92{
93 unsigned int val;
94
95 regmap_read(rtc->gpbr, rtc->gpbr_offset, &val);
96
97 return val;
98}
99
100static inline void gpbr_writel(struct sam9_rtc *rtc, unsigned int val)
101{
102 regmap_write(rtc->gpbr, rtc->gpbr_offset, val);
103}
104
105/*
106 * Read current time and date in RTC
107 */
108static int at91_rtc_readtime(struct device *dev, struct rtc_time *tm)
109{
110 struct sam9_rtc *rtc = dev_get_drvdata(dev);
111 u32 secs, secs2;
112 u32 offset;
113
114 /* read current time offset */
115 offset = gpbr_readl(rtc);
116 if (offset == 0)
117 return -EILSEQ;
118
119 /* reread the counter to help sync the two clock domains */
120 secs = rtt_readl(rtc, VR);
121 secs2 = rtt_readl(rtc, VR);
122 if (secs != secs2)
123 secs = rtt_readl(rtc, VR);
124
125 rtc_time_to_tm(offset + secs, tm);
126
127 dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "readtime",
128 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
129 tm->tm_hour, tm->tm_min, tm->tm_sec);
130
131 return 0;
132}
133
134/*
135 * Set current time and date in RTC
136 */
137static int at91_rtc_settime(struct device *dev, struct rtc_time *tm)
138{
139 struct sam9_rtc *rtc = dev_get_drvdata(dev);
140 int err;
141 u32 offset, alarm, mr;
142 unsigned long secs;
143
144 dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "settime",
145 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
146 tm->tm_hour, tm->tm_min, tm->tm_sec);
147
148 err = rtc_tm_to_time(tm, &secs);
149 if (err != 0)
150 return err;
151
152 mr = rtt_readl(rtc, MR);
153
154 /* disable interrupts */
155 rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
156
157 /* read current time offset */
158 offset = gpbr_readl(rtc);
159
160 /* store the new base time in a battery backup register */
161 secs += 1;
162 gpbr_writel(rtc, secs);
163
164 /* adjust the alarm time for the new base */
165 alarm = rtt_readl(rtc, AR);
166 if (alarm != ALARM_DISABLED) {
167 if (offset > secs) {
168 /* time jumped backwards, increase time until alarm */
169 alarm += (offset - secs);
170 } else if ((alarm + offset) > secs) {
171 /* time jumped forwards, decrease time until alarm */
172 alarm -= (secs - offset);
173 } else {
174 /* time jumped past the alarm, disable alarm */
175 alarm = ALARM_DISABLED;
176 mr &= ~AT91_RTT_ALMIEN;
177 }
178 rtt_writel(rtc, AR, alarm);
179 }
180
181 /* reset the timer, and re-enable interrupts */
182 rtt_writel(rtc, MR, mr | AT91_RTT_RTTRST);
183
184 return 0;
185}
186
187static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
188{
189 struct sam9_rtc *rtc = dev_get_drvdata(dev);
190 struct rtc_time *tm = &alrm->time;
191 u32 alarm = rtt_readl(rtc, AR);
192 u32 offset;
193
194 offset = gpbr_readl(rtc);
195 if (offset == 0)
196 return -EILSEQ;
197
198 memset(alrm, 0, sizeof(*alrm));
199 if (alarm != ALARM_DISABLED && offset != 0) {
200 rtc_time_to_tm(offset + alarm, tm);
201
202 dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "readalarm",
203 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
204 tm->tm_hour, tm->tm_min, tm->tm_sec);
205
206 if (rtt_readl(rtc, MR) & AT91_RTT_ALMIEN)
207 alrm->enabled = 1;
208 }
209
210 return 0;
211}
212
213static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
214{
215 struct sam9_rtc *rtc = dev_get_drvdata(dev);
216 struct rtc_time *tm = &alrm->time;
217 unsigned long secs;
218 u32 offset;
219 u32 mr;
220 int err;
221
222 err = rtc_tm_to_time(tm, &secs);
223 if (err != 0)
224 return err;
225
226 offset = gpbr_readl(rtc);
227 if (offset == 0) {
228 /* time is not set */
229 return -EILSEQ;
230 }
231 mr = rtt_readl(rtc, MR);
232 rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN);
233
234 /* alarm in the past? finish and leave disabled */
235 if (secs <= offset) {
236 rtt_writel(rtc, AR, ALARM_DISABLED);
237 return 0;
238 }
239
240 /* else set alarm and maybe enable it */
241 rtt_writel(rtc, AR, secs - offset);
242 if (alrm->enabled)
243 rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN);
244
245 dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "setalarm",
246 tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_hour,
247 tm->tm_min, tm->tm_sec);
248
249 return 0;
250}
251
252static int at91_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
253{
254 struct sam9_rtc *rtc = dev_get_drvdata(dev);
255 u32 mr = rtt_readl(rtc, MR);
256
257 dev_dbg(dev, "alarm_irq_enable: enabled=%08x, mr %08x\n", enabled, mr);
258 if (enabled)
259 rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN);
260 else
261 rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN);
262 return 0;
263}
264
265/*
266 * Provide additional RTC information in /proc/driver/rtc
267 */
268static int at91_rtc_proc(struct device *dev, struct seq_file *seq)
269{
270 struct sam9_rtc *rtc = dev_get_drvdata(dev);
271 u32 mr = rtt_readl(rtc, MR);
272
273 seq_printf(seq, "update_IRQ\t: %s\n",
274 (mr & AT91_RTT_RTTINCIEN) ? "yes" : "no");
275 return 0;
276}
277
278static irqreturn_t at91_rtc_cache_events(struct sam9_rtc *rtc)
279{
280 u32 sr, mr;
281
282 /* Shared interrupt may be for another device. Note: reading
283 * SR clears it, so we must only read it in this irq handler!
284 */
285 mr = rtt_readl(rtc, MR) & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
286 sr = rtt_readl(rtc, SR) & (mr >> 16);
287 if (!sr)
288 return IRQ_NONE;
289
290 /* alarm status */
291 if (sr & AT91_RTT_ALMS)
292 rtc->events |= (RTC_AF | RTC_IRQF);
293
294 /* timer update/increment */
295 if (sr & AT91_RTT_RTTINC)
296 rtc->events |= (RTC_UF | RTC_IRQF);
297
298 return IRQ_HANDLED;
299}
300
301static void at91_rtc_flush_events(struct sam9_rtc *rtc)
302{
303 if (!rtc->events)
304 return;
305
306 rtc_update_irq(rtc->rtcdev, 1, rtc->events);
307 rtc->events = 0;
308
309 pr_debug("%s: num=%ld, events=0x%02lx\n", __func__,
310 rtc->events >> 8, rtc->events & 0x000000FF);
311}
312
313/*
314 * IRQ handler for the RTC
315 */
316static irqreturn_t at91_rtc_interrupt(int irq, void *_rtc)
317{
318 struct sam9_rtc *rtc = _rtc;
319 int ret;
320
321 spin_lock(&rtc->lock);
322
323 ret = at91_rtc_cache_events(rtc);
324
325 /* We're called in suspended state */
326 if (rtc->suspended) {
327 /* Mask irqs coming from this peripheral */
328 rtt_writel(rtc, MR,
329 rtt_readl(rtc, MR) &
330 ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
331 /* Trigger a system wakeup */
332 pm_system_wakeup();
333 } else {
334 at91_rtc_flush_events(rtc);
335 }
336
337 spin_unlock(&rtc->lock);
338
339 return ret;
340}
341
342static const struct rtc_class_ops at91_rtc_ops = {
343 .read_time = at91_rtc_readtime,
344 .set_time = at91_rtc_settime,
345 .read_alarm = at91_rtc_readalarm,
346 .set_alarm = at91_rtc_setalarm,
347 .proc = at91_rtc_proc,
348 .alarm_irq_enable = at91_rtc_alarm_irq_enable,
349};
350
351static const struct regmap_config gpbr_regmap_config = {
352 .name = "gpbr",
353 .reg_bits = 32,
354 .val_bits = 32,
355 .reg_stride = 4,
356};
357
358/*
359 * Initialize and install RTC driver
360 */
361static int at91_rtc_probe(struct platform_device *pdev)
362{
363 struct resource *r;
364 struct sam9_rtc *rtc;
365 int ret, irq;
366 u32 mr;
367 unsigned int sclk_rate;
368
369 irq = platform_get_irq(pdev, 0);
370 if (irq < 0) {
371 dev_err(&pdev->dev, "failed to get interrupt resource\n");
372 return irq;
373 }
374
375 rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
376 if (!rtc)
377 return -ENOMEM;
378
379 spin_lock_init(&rtc->lock);
380 rtc->irq = irq;
381
382 /* platform setup code should have handled this; sigh */
383 if (!device_can_wakeup(&pdev->dev))
384 device_init_wakeup(&pdev->dev, 1);
385
386 platform_set_drvdata(pdev, rtc);
387
388 r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
389 rtc->rtt = devm_ioremap_resource(&pdev->dev, r);
390 if (IS_ERR(rtc->rtt))
391 return PTR_ERR(rtc->rtt);
392
393 if (!pdev->dev.of_node) {
394 /*
395 * TODO: Remove this code chunk when removing non DT board
396 * support. Remember to remove the gpbr_regmap_config
397 * variable too.
398 */
399 void __iomem *gpbr;
400
401 r = platform_get_resource(pdev, IORESOURCE_MEM, 1);
402 gpbr = devm_ioremap_resource(&pdev->dev, r);
403 if (IS_ERR(gpbr))
404 return PTR_ERR(gpbr);
405
406 rtc->gpbr = regmap_init_mmio(NULL, gpbr,
407 &gpbr_regmap_config);
408 } else {
409 struct of_phandle_args args;
410
411 ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node,
412 "atmel,rtt-rtc-time-reg", 1, 0,
413 &args);
414 if (ret)
415 return ret;
416
417 rtc->gpbr = syscon_node_to_regmap(args.np);
418 rtc->gpbr_offset = args.args[0];
419 }
420
421 if (IS_ERR(rtc->gpbr)) {
422 dev_err(&pdev->dev, "failed to retrieve gpbr regmap, aborting.\n");
423 return -ENOMEM;
424 }
425
426 rtc->sclk = devm_clk_get(&pdev->dev, NULL);
427 if (IS_ERR(rtc->sclk))
428 return PTR_ERR(rtc->sclk);
429
430 ret = clk_prepare_enable(rtc->sclk);
431 if (ret) {
432 dev_err(&pdev->dev, "Could not enable slow clock\n");
433 return ret;
434 }
435
436 sclk_rate = clk_get_rate(rtc->sclk);
437 if (!sclk_rate || sclk_rate > AT91_RTT_RTPRES) {
438 dev_err(&pdev->dev, "Invalid slow clock rate\n");
439 ret = -EINVAL;
440 goto err_clk;
441 }
442
443 mr = rtt_readl(rtc, MR);
444
445 /* unless RTT is counting at 1 Hz, re-initialize it */
446 if ((mr & AT91_RTT_RTPRES) != sclk_rate) {
447 mr = AT91_RTT_RTTRST | (sclk_rate & AT91_RTT_RTPRES);
448 gpbr_writel(rtc, 0);
449 }
450
451 /* disable all interrupts (same as on shutdown path) */
452 mr &= ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
453 rtt_writel(rtc, MR, mr);
454
455 rtc->rtcdev = devm_rtc_device_register(&pdev->dev, pdev->name,
456 &at91_rtc_ops, THIS_MODULE);
457 if (IS_ERR(rtc->rtcdev)) {
458 ret = PTR_ERR(rtc->rtcdev);
459 goto err_clk;
460 }
461
462 /* register irq handler after we know what name we'll use */
463 ret = devm_request_irq(&pdev->dev, rtc->irq, at91_rtc_interrupt,
464 IRQF_SHARED | IRQF_COND_SUSPEND,
465 dev_name(&rtc->rtcdev->dev), rtc);
466 if (ret) {
467 dev_dbg(&pdev->dev, "can't share IRQ %d?\n", rtc->irq);
468 goto err_clk;
469 }
470
471 /* NOTE: sam9260 rev A silicon has a ROM bug which resets the
472 * RTT on at least some reboots. If you have that chip, you must
473 * initialize the time from some external source like a GPS, wall
474 * clock, discrete RTC, etc
475 */
476
477 if (gpbr_readl(rtc) == 0)
478 dev_warn(&pdev->dev, "%s: SET TIME!\n",
479 dev_name(&rtc->rtcdev->dev));
480
481 return 0;
482
483err_clk:
484 clk_disable_unprepare(rtc->sclk);
485
486 return ret;
487}
488
489/*
490 * Disable and remove the RTC driver
491 */
492static int at91_rtc_remove(struct platform_device *pdev)
493{
494 struct sam9_rtc *rtc = platform_get_drvdata(pdev);
495 u32 mr = rtt_readl(rtc, MR);
496
497 /* disable all interrupts */
498 rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
499
500 clk_disable_unprepare(rtc->sclk);
501
502 return 0;
503}
504
505static void at91_rtc_shutdown(struct platform_device *pdev)
506{
507 struct sam9_rtc *rtc = platform_get_drvdata(pdev);
508 u32 mr = rtt_readl(rtc, MR);
509
510 rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
511 rtt_writel(rtc, MR, mr & ~rtc->imr);
512}
513
514#ifdef CONFIG_PM_SLEEP
515
516/* AT91SAM9 RTC Power management control */
517
518static int at91_rtc_suspend(struct device *dev)
519{
520 struct sam9_rtc *rtc = dev_get_drvdata(dev);
521 u32 mr = rtt_readl(rtc, MR);
522
523 /*
524 * This IRQ is shared with DBGU and other hardware which isn't
525 * necessarily a wakeup event source.
526 */
527 rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
528 if (rtc->imr) {
529 if (device_may_wakeup(dev) && (mr & AT91_RTT_ALMIEN)) {
530 unsigned long flags;
531
532 enable_irq_wake(rtc->irq);
533 spin_lock_irqsave(&rtc->lock, flags);
534 rtc->suspended = true;
535 spin_unlock_irqrestore(&rtc->lock, flags);
536 /* don't let RTTINC cause wakeups */
537 if (mr & AT91_RTT_RTTINCIEN)
538 rtt_writel(rtc, MR, mr & ~AT91_RTT_RTTINCIEN);
539 } else
540 rtt_writel(rtc, MR, mr & ~rtc->imr);
541 }
542
543 return 0;
544}
545
546static int at91_rtc_resume(struct device *dev)
547{
548 struct sam9_rtc *rtc = dev_get_drvdata(dev);
549 u32 mr;
550
551 if (rtc->imr) {
552 unsigned long flags;
553
554 if (device_may_wakeup(dev))
555 disable_irq_wake(rtc->irq);
556 mr = rtt_readl(rtc, MR);
557 rtt_writel(rtc, MR, mr | rtc->imr);
558
559 spin_lock_irqsave(&rtc->lock, flags);
560 rtc->suspended = false;
561 at91_rtc_cache_events(rtc);
562 at91_rtc_flush_events(rtc);
563 spin_unlock_irqrestore(&rtc->lock, flags);
564 }
565
566 return 0;
567}
568#endif
569
570static SIMPLE_DEV_PM_OPS(at91_rtc_pm_ops, at91_rtc_suspend, at91_rtc_resume);
571
572#ifdef CONFIG_OF
573static const struct of_device_id at91_rtc_dt_ids[] = {
574 { .compatible = "atmel,at91sam9260-rtt" },
575 { /* sentinel */ }
576};
577MODULE_DEVICE_TABLE(of, at91_rtc_dt_ids);
578#endif
579
580static struct platform_driver at91_rtc_driver = {
581 .probe = at91_rtc_probe,
582 .remove = at91_rtc_remove,
583 .shutdown = at91_rtc_shutdown,
584 .driver = {
585 .name = "rtc-at91sam9",
586 .pm = &at91_rtc_pm_ops,
587 .of_match_table = of_match_ptr(at91_rtc_dt_ids),
588 },
589};
590
591module_platform_driver(at91_rtc_driver);
592
593MODULE_AUTHOR("Michel Benoit");
594MODULE_DESCRIPTION("RTC driver for Atmel AT91SAM9x");
595MODULE_LICENSE("GPL");