Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/* Framework for configuring and reading PHY devices
3 * Based on code in sungem_phy.c and gianfar_phy.c
4 *
5 * Author: Andy Fleming
6 *
7 * Copyright (c) 2004 Freescale Semiconductor, Inc.
8 * Copyright (c) 2006, 2007 Maciej W. Rozycki
9 */
10
11#include <linux/kernel.h>
12#include <linux/string.h>
13#include <linux/errno.h>
14#include <linux/unistd.h>
15#include <linux/interrupt.h>
16#include <linux/delay.h>
17#include <linux/netdevice.h>
18#include <linux/netlink.h>
19#include <linux/etherdevice.h>
20#include <linux/skbuff.h>
21#include <linux/mm.h>
22#include <linux/module.h>
23#include <linux/mii.h>
24#include <linux/ethtool.h>
25#include <linux/ethtool_netlink.h>
26#include <linux/phy.h>
27#include <linux/phy_led_triggers.h>
28#include <linux/sfp.h>
29#include <linux/workqueue.h>
30#include <linux/mdio.h>
31#include <linux/io.h>
32#include <linux/uaccess.h>
33#include <linux/atomic.h>
34#include <linux/suspend.h>
35#include <net/netlink.h>
36#include <net/genetlink.h>
37#include <net/sock.h>
38
39#define PHY_STATE_TIME HZ
40
41#define PHY_STATE_STR(_state) \
42 case PHY_##_state: \
43 return __stringify(_state); \
44
45static const char *phy_state_to_str(enum phy_state st)
46{
47 switch (st) {
48 PHY_STATE_STR(DOWN)
49 PHY_STATE_STR(READY)
50 PHY_STATE_STR(UP)
51 PHY_STATE_STR(RUNNING)
52 PHY_STATE_STR(NOLINK)
53 PHY_STATE_STR(CABLETEST)
54 PHY_STATE_STR(HALTED)
55 PHY_STATE_STR(ERROR)
56 }
57
58 return NULL;
59}
60
61static void phy_process_state_change(struct phy_device *phydev,
62 enum phy_state old_state)
63{
64 if (old_state != phydev->state) {
65 phydev_dbg(phydev, "PHY state change %s -> %s\n",
66 phy_state_to_str(old_state),
67 phy_state_to_str(phydev->state));
68 if (phydev->drv && phydev->drv->link_change_notify)
69 phydev->drv->link_change_notify(phydev);
70 }
71}
72
73static void phy_link_up(struct phy_device *phydev)
74{
75 phydev->phy_link_change(phydev, true);
76 phy_led_trigger_change_speed(phydev);
77}
78
79static void phy_link_down(struct phy_device *phydev)
80{
81 phydev->phy_link_change(phydev, false);
82 phy_led_trigger_change_speed(phydev);
83 WRITE_ONCE(phydev->link_down_events, phydev->link_down_events + 1);
84}
85
86static const char *phy_pause_str(struct phy_device *phydev)
87{
88 bool local_pause, local_asym_pause;
89
90 if (phydev->autoneg == AUTONEG_DISABLE)
91 goto no_pause;
92
93 local_pause = linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT,
94 phydev->advertising);
95 local_asym_pause = linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
96 phydev->advertising);
97
98 if (local_pause && phydev->pause)
99 return "rx/tx";
100
101 if (local_asym_pause && phydev->asym_pause) {
102 if (local_pause)
103 return "rx";
104 if (phydev->pause)
105 return "tx";
106 }
107
108no_pause:
109 return "off";
110}
111
112/**
113 * phy_print_status - Convenience function to print out the current phy status
114 * @phydev: the phy_device struct
115 */
116void phy_print_status(struct phy_device *phydev)
117{
118 if (phydev->link) {
119 netdev_info(phydev->attached_dev,
120 "Link is Up - %s/%s %s- flow control %s\n",
121 phy_speed_to_str(phydev->speed),
122 phy_duplex_to_str(phydev->duplex),
123 phydev->downshifted_rate ? "(downshifted) " : "",
124 phy_pause_str(phydev));
125 } else {
126 netdev_info(phydev->attached_dev, "Link is Down\n");
127 }
128}
129EXPORT_SYMBOL(phy_print_status);
130
131/**
132 * phy_get_rate_matching - determine if rate matching is supported
133 * @phydev: The phy device to return rate matching for
134 * @iface: The interface mode to use
135 *
136 * This determines the type of rate matching (if any) that @phy supports
137 * using @iface. @iface may be %PHY_INTERFACE_MODE_NA to determine if any
138 * interface supports rate matching.
139 *
140 * Return: The type of rate matching @phy supports for @iface, or
141 * %RATE_MATCH_NONE.
142 */
143int phy_get_rate_matching(struct phy_device *phydev,
144 phy_interface_t iface)
145{
146 int ret = RATE_MATCH_NONE;
147
148 if (phydev->drv->get_rate_matching) {
149 mutex_lock(&phydev->lock);
150 ret = phydev->drv->get_rate_matching(phydev, iface);
151 mutex_unlock(&phydev->lock);
152 }
153
154 return ret;
155}
156EXPORT_SYMBOL_GPL(phy_get_rate_matching);
157
158/**
159 * phy_config_interrupt - configure the PHY device for the requested interrupts
160 * @phydev: the phy_device struct
161 * @interrupts: interrupt flags to configure for this @phydev
162 *
163 * Returns 0 on success or < 0 on error.
164 */
165static int phy_config_interrupt(struct phy_device *phydev, bool interrupts)
166{
167 phydev->interrupts = interrupts ? 1 : 0;
168 if (phydev->drv->config_intr)
169 return phydev->drv->config_intr(phydev);
170
171 return 0;
172}
173
174/**
175 * phy_restart_aneg - restart auto-negotiation
176 * @phydev: target phy_device struct
177 *
178 * Restart the autonegotiation on @phydev. Returns >= 0 on success or
179 * negative errno on error.
180 */
181int phy_restart_aneg(struct phy_device *phydev)
182{
183 int ret;
184
185 if (phydev->is_c45 && !(phydev->c45_ids.devices_in_package & BIT(0)))
186 ret = genphy_c45_restart_aneg(phydev);
187 else
188 ret = genphy_restart_aneg(phydev);
189
190 return ret;
191}
192EXPORT_SYMBOL_GPL(phy_restart_aneg);
193
194/**
195 * phy_aneg_done - return auto-negotiation status
196 * @phydev: target phy_device struct
197 *
198 * Description: Return the auto-negotiation status from this @phydev
199 * Returns > 0 on success or < 0 on error. 0 means that auto-negotiation
200 * is still pending.
201 */
202int phy_aneg_done(struct phy_device *phydev)
203{
204 if (phydev->drv && phydev->drv->aneg_done)
205 return phydev->drv->aneg_done(phydev);
206 else if (phydev->is_c45)
207 return genphy_c45_aneg_done(phydev);
208 else
209 return genphy_aneg_done(phydev);
210}
211EXPORT_SYMBOL(phy_aneg_done);
212
213/**
214 * phy_find_valid - find a PHY setting that matches the requested parameters
215 * @speed: desired speed
216 * @duplex: desired duplex
217 * @supported: mask of supported link modes
218 *
219 * Locate a supported phy setting that is, in priority order:
220 * - an exact match for the specified speed and duplex mode
221 * - a match for the specified speed, or slower speed
222 * - the slowest supported speed
223 * Returns the matched phy_setting entry, or %NULL if no supported phy
224 * settings were found.
225 */
226static const struct phy_setting *
227phy_find_valid(int speed, int duplex, unsigned long *supported)
228{
229 return phy_lookup_setting(speed, duplex, supported, false);
230}
231
232/**
233 * phy_supported_speeds - return all speeds currently supported by a phy device
234 * @phy: The phy device to return supported speeds of.
235 * @speeds: buffer to store supported speeds in.
236 * @size: size of speeds buffer.
237 *
238 * Description: Returns the number of supported speeds, and fills the speeds
239 * buffer with the supported speeds. If speeds buffer is too small to contain
240 * all currently supported speeds, will return as many speeds as can fit.
241 */
242unsigned int phy_supported_speeds(struct phy_device *phy,
243 unsigned int *speeds,
244 unsigned int size)
245{
246 return phy_speeds(speeds, size, phy->supported);
247}
248
249/**
250 * phy_check_valid - check if there is a valid PHY setting which matches
251 * speed, duplex, and feature mask
252 * @speed: speed to match
253 * @duplex: duplex to match
254 * @features: A mask of the valid settings
255 *
256 * Description: Returns true if there is a valid setting, false otherwise.
257 */
258bool phy_check_valid(int speed, int duplex, unsigned long *features)
259{
260 return !!phy_lookup_setting(speed, duplex, features, true);
261}
262EXPORT_SYMBOL(phy_check_valid);
263
264/**
265 * phy_sanitize_settings - make sure the PHY is set to supported speed and duplex
266 * @phydev: the target phy_device struct
267 *
268 * Description: Make sure the PHY is set to supported speeds and
269 * duplexes. Drop down by one in this order: 1000/FULL,
270 * 1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF.
271 */
272static void phy_sanitize_settings(struct phy_device *phydev)
273{
274 const struct phy_setting *setting;
275
276 setting = phy_find_valid(phydev->speed, phydev->duplex,
277 phydev->supported);
278 if (setting) {
279 phydev->speed = setting->speed;
280 phydev->duplex = setting->duplex;
281 } else {
282 /* We failed to find anything (no supported speeds?) */
283 phydev->speed = SPEED_UNKNOWN;
284 phydev->duplex = DUPLEX_UNKNOWN;
285 }
286}
287
288void phy_ethtool_ksettings_get(struct phy_device *phydev,
289 struct ethtool_link_ksettings *cmd)
290{
291 mutex_lock(&phydev->lock);
292 linkmode_copy(cmd->link_modes.supported, phydev->supported);
293 linkmode_copy(cmd->link_modes.advertising, phydev->advertising);
294 linkmode_copy(cmd->link_modes.lp_advertising, phydev->lp_advertising);
295
296 cmd->base.speed = phydev->speed;
297 cmd->base.duplex = phydev->duplex;
298 cmd->base.master_slave_cfg = phydev->master_slave_get;
299 cmd->base.master_slave_state = phydev->master_slave_state;
300 cmd->base.rate_matching = phydev->rate_matching;
301 if (phydev->interface == PHY_INTERFACE_MODE_MOCA)
302 cmd->base.port = PORT_BNC;
303 else
304 cmd->base.port = phydev->port;
305 cmd->base.transceiver = phy_is_internal(phydev) ?
306 XCVR_INTERNAL : XCVR_EXTERNAL;
307 cmd->base.phy_address = phydev->mdio.addr;
308 cmd->base.autoneg = phydev->autoneg;
309 cmd->base.eth_tp_mdix_ctrl = phydev->mdix_ctrl;
310 cmd->base.eth_tp_mdix = phydev->mdix;
311 mutex_unlock(&phydev->lock);
312}
313EXPORT_SYMBOL(phy_ethtool_ksettings_get);
314
315/**
316 * phy_mii_ioctl - generic PHY MII ioctl interface
317 * @phydev: the phy_device struct
318 * @ifr: &struct ifreq for socket ioctl's
319 * @cmd: ioctl cmd to execute
320 *
321 * Note that this function is currently incompatible with the
322 * PHYCONTROL layer. It changes registers without regard to
323 * current state. Use at own risk.
324 */
325int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd)
326{
327 struct mii_ioctl_data *mii_data = if_mii(ifr);
328 struct kernel_hwtstamp_config kernel_cfg;
329 struct netlink_ext_ack extack = {};
330 u16 val = mii_data->val_in;
331 bool change_autoneg = false;
332 struct hwtstamp_config cfg;
333 int prtad, devad;
334 int ret;
335
336 switch (cmd) {
337 case SIOCGMIIPHY:
338 mii_data->phy_id = phydev->mdio.addr;
339 fallthrough;
340
341 case SIOCGMIIREG:
342 if (mdio_phy_id_is_c45(mii_data->phy_id)) {
343 prtad = mdio_phy_id_prtad(mii_data->phy_id);
344 devad = mdio_phy_id_devad(mii_data->phy_id);
345 ret = mdiobus_c45_read(phydev->mdio.bus, prtad, devad,
346 mii_data->reg_num);
347
348 } else {
349 ret = mdiobus_read(phydev->mdio.bus, mii_data->phy_id,
350 mii_data->reg_num);
351 }
352
353 if (ret < 0)
354 return ret;
355
356 mii_data->val_out = ret;
357
358 return 0;
359
360 case SIOCSMIIREG:
361 if (mdio_phy_id_is_c45(mii_data->phy_id)) {
362 prtad = mdio_phy_id_prtad(mii_data->phy_id);
363 devad = mdio_phy_id_devad(mii_data->phy_id);
364 } else {
365 prtad = mii_data->phy_id;
366 devad = mii_data->reg_num;
367 }
368 if (prtad == phydev->mdio.addr) {
369 switch (devad) {
370 case MII_BMCR:
371 if ((val & (BMCR_RESET | BMCR_ANENABLE)) == 0) {
372 if (phydev->autoneg == AUTONEG_ENABLE)
373 change_autoneg = true;
374 phydev->autoneg = AUTONEG_DISABLE;
375 if (val & BMCR_FULLDPLX)
376 phydev->duplex = DUPLEX_FULL;
377 else
378 phydev->duplex = DUPLEX_HALF;
379 if (val & BMCR_SPEED1000)
380 phydev->speed = SPEED_1000;
381 else if (val & BMCR_SPEED100)
382 phydev->speed = SPEED_100;
383 else phydev->speed = SPEED_10;
384 } else {
385 if (phydev->autoneg == AUTONEG_DISABLE)
386 change_autoneg = true;
387 phydev->autoneg = AUTONEG_ENABLE;
388 }
389 break;
390 case MII_ADVERTISE:
391 mii_adv_mod_linkmode_adv_t(phydev->advertising,
392 val);
393 change_autoneg = true;
394 break;
395 case MII_CTRL1000:
396 mii_ctrl1000_mod_linkmode_adv_t(phydev->advertising,
397 val);
398 change_autoneg = true;
399 break;
400 default:
401 /* do nothing */
402 break;
403 }
404 }
405
406 if (mdio_phy_id_is_c45(mii_data->phy_id))
407 mdiobus_c45_write(phydev->mdio.bus, prtad, devad,
408 mii_data->reg_num, val);
409 else
410 mdiobus_write(phydev->mdio.bus, prtad, devad, val);
411
412 if (prtad == phydev->mdio.addr &&
413 devad == MII_BMCR &&
414 val & BMCR_RESET)
415 return phy_init_hw(phydev);
416
417 if (change_autoneg)
418 return phy_start_aneg(phydev);
419
420 return 0;
421
422 case SIOCSHWTSTAMP:
423 if (phydev->mii_ts && phydev->mii_ts->hwtstamp) {
424 if (copy_from_user(&cfg, ifr->ifr_data, sizeof(cfg)))
425 return -EFAULT;
426
427 hwtstamp_config_to_kernel(&kernel_cfg, &cfg);
428 ret = phydev->mii_ts->hwtstamp(phydev->mii_ts, &kernel_cfg, &extack);
429 if (ret)
430 return ret;
431
432 hwtstamp_config_from_kernel(&cfg, &kernel_cfg);
433 if (copy_to_user(ifr->ifr_data, &cfg, sizeof(cfg)))
434 return -EFAULT;
435
436 return 0;
437 }
438 fallthrough;
439
440 default:
441 return -EOPNOTSUPP;
442 }
443}
444EXPORT_SYMBOL(phy_mii_ioctl);
445
446/**
447 * phy_do_ioctl - generic ndo_eth_ioctl implementation
448 * @dev: the net_device struct
449 * @ifr: &struct ifreq for socket ioctl's
450 * @cmd: ioctl cmd to execute
451 */
452int phy_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
453{
454 if (!dev->phydev)
455 return -ENODEV;
456
457 return phy_mii_ioctl(dev->phydev, ifr, cmd);
458}
459EXPORT_SYMBOL(phy_do_ioctl);
460
461/**
462 * phy_do_ioctl_running - generic ndo_eth_ioctl implementation but test first
463 *
464 * @dev: the net_device struct
465 * @ifr: &struct ifreq for socket ioctl's
466 * @cmd: ioctl cmd to execute
467 *
468 * Same as phy_do_ioctl, but ensures that net_device is running before
469 * handling the ioctl.
470 */
471int phy_do_ioctl_running(struct net_device *dev, struct ifreq *ifr, int cmd)
472{
473 if (!netif_running(dev))
474 return -ENODEV;
475
476 return phy_do_ioctl(dev, ifr, cmd);
477}
478EXPORT_SYMBOL(phy_do_ioctl_running);
479
480/**
481 * __phy_hwtstamp_get - Get hardware timestamping configuration from PHY
482 *
483 * @phydev: the PHY device structure
484 * @config: structure holding the timestamping configuration
485 *
486 * Query the PHY device for its current hardware timestamping configuration.
487 */
488int __phy_hwtstamp_get(struct phy_device *phydev,
489 struct kernel_hwtstamp_config *config)
490{
491 if (!phydev)
492 return -ENODEV;
493
494 return -EOPNOTSUPP;
495}
496
497/**
498 * __phy_hwtstamp_set - Modify PHY hardware timestamping configuration
499 *
500 * @phydev: the PHY device structure
501 * @config: structure holding the timestamping configuration
502 * @extack: netlink extended ack structure, for error reporting
503 */
504int __phy_hwtstamp_set(struct phy_device *phydev,
505 struct kernel_hwtstamp_config *config,
506 struct netlink_ext_ack *extack)
507{
508 if (!phydev)
509 return -ENODEV;
510
511 if (phydev->mii_ts && phydev->mii_ts->hwtstamp)
512 return phydev->mii_ts->hwtstamp(phydev->mii_ts, config, extack);
513
514 return -EOPNOTSUPP;
515}
516
517/**
518 * phy_queue_state_machine - Trigger the state machine to run soon
519 *
520 * @phydev: the phy_device struct
521 * @jiffies: Run the state machine after these jiffies
522 */
523void phy_queue_state_machine(struct phy_device *phydev, unsigned long jiffies)
524{
525 mod_delayed_work(system_power_efficient_wq, &phydev->state_queue,
526 jiffies);
527}
528EXPORT_SYMBOL(phy_queue_state_machine);
529
530/**
531 * phy_trigger_machine - Trigger the state machine to run now
532 *
533 * @phydev: the phy_device struct
534 */
535void phy_trigger_machine(struct phy_device *phydev)
536{
537 phy_queue_state_machine(phydev, 0);
538}
539EXPORT_SYMBOL(phy_trigger_machine);
540
541static void phy_abort_cable_test(struct phy_device *phydev)
542{
543 int err;
544
545 ethnl_cable_test_finished(phydev);
546
547 err = phy_init_hw(phydev);
548 if (err)
549 phydev_err(phydev, "Error while aborting cable test");
550}
551
552/**
553 * phy_ethtool_get_strings - Get the statistic counter names
554 *
555 * @phydev: the phy_device struct
556 * @data: Where to put the strings
557 */
558int phy_ethtool_get_strings(struct phy_device *phydev, u8 *data)
559{
560 if (!phydev->drv)
561 return -EIO;
562
563 mutex_lock(&phydev->lock);
564 phydev->drv->get_strings(phydev, data);
565 mutex_unlock(&phydev->lock);
566
567 return 0;
568}
569EXPORT_SYMBOL(phy_ethtool_get_strings);
570
571/**
572 * phy_ethtool_get_sset_count - Get the number of statistic counters
573 *
574 * @phydev: the phy_device struct
575 */
576int phy_ethtool_get_sset_count(struct phy_device *phydev)
577{
578 int ret;
579
580 if (!phydev->drv)
581 return -EIO;
582
583 if (phydev->drv->get_sset_count &&
584 phydev->drv->get_strings &&
585 phydev->drv->get_stats) {
586 mutex_lock(&phydev->lock);
587 ret = phydev->drv->get_sset_count(phydev);
588 mutex_unlock(&phydev->lock);
589
590 return ret;
591 }
592
593 return -EOPNOTSUPP;
594}
595EXPORT_SYMBOL(phy_ethtool_get_sset_count);
596
597/**
598 * phy_ethtool_get_stats - Get the statistic counters
599 *
600 * @phydev: the phy_device struct
601 * @stats: What counters to get
602 * @data: Where to store the counters
603 */
604int phy_ethtool_get_stats(struct phy_device *phydev,
605 struct ethtool_stats *stats, u64 *data)
606{
607 if (!phydev->drv)
608 return -EIO;
609
610 mutex_lock(&phydev->lock);
611 phydev->drv->get_stats(phydev, stats, data);
612 mutex_unlock(&phydev->lock);
613
614 return 0;
615}
616EXPORT_SYMBOL(phy_ethtool_get_stats);
617
618/**
619 * __phy_ethtool_get_phy_stats - Retrieve standardized PHY statistics
620 * @phydev: Pointer to the PHY device
621 * @phy_stats: Pointer to ethtool_eth_phy_stats structure
622 * @phydev_stats: Pointer to ethtool_phy_stats structure
623 *
624 * Fetches PHY statistics using a kernel-defined interface for consistent
625 * diagnostics. Unlike phy_ethtool_get_stats(), which allows custom stats,
626 * this function enforces a standardized format for better interoperability.
627 */
628void __phy_ethtool_get_phy_stats(struct phy_device *phydev,
629 struct ethtool_eth_phy_stats *phy_stats,
630 struct ethtool_phy_stats *phydev_stats)
631{
632 if (!phydev->drv || !phydev->drv->get_phy_stats)
633 return;
634
635 mutex_lock(&phydev->lock);
636 phydev->drv->get_phy_stats(phydev, phy_stats, phydev_stats);
637 mutex_unlock(&phydev->lock);
638}
639
640/**
641 * __phy_ethtool_get_link_ext_stats - Retrieve extended link statistics for a PHY
642 * @phydev: Pointer to the PHY device
643 * @link_stats: Pointer to the structure to store extended link statistics
644 *
645 * Populates the ethtool_link_ext_stats structure with link down event counts
646 * and additional driver-specific link statistics, if available.
647 */
648void __phy_ethtool_get_link_ext_stats(struct phy_device *phydev,
649 struct ethtool_link_ext_stats *link_stats)
650{
651 link_stats->link_down_events = READ_ONCE(phydev->link_down_events);
652
653 if (!phydev->drv || !phydev->drv->get_link_stats)
654 return;
655
656 mutex_lock(&phydev->lock);
657 phydev->drv->get_link_stats(phydev, link_stats);
658 mutex_unlock(&phydev->lock);
659}
660
661/**
662 * phy_ethtool_get_plca_cfg - Get PLCA RS configuration
663 * @phydev: the phy_device struct
664 * @plca_cfg: where to store the retrieved configuration
665 *
666 * Retrieve the PLCA configuration from the PHY. Return 0 on success or a
667 * negative value if an error occurred.
668 */
669int phy_ethtool_get_plca_cfg(struct phy_device *phydev,
670 struct phy_plca_cfg *plca_cfg)
671{
672 int ret;
673
674 if (!phydev->drv) {
675 ret = -EIO;
676 goto out;
677 }
678
679 if (!phydev->drv->get_plca_cfg) {
680 ret = -EOPNOTSUPP;
681 goto out;
682 }
683
684 mutex_lock(&phydev->lock);
685 ret = phydev->drv->get_plca_cfg(phydev, plca_cfg);
686
687 mutex_unlock(&phydev->lock);
688out:
689 return ret;
690}
691
692/**
693 * plca_check_valid - Check PLCA configuration before enabling
694 * @phydev: the phy_device struct
695 * @plca_cfg: current PLCA configuration
696 * @extack: extack for reporting useful error messages
697 *
698 * Checks whether the PLCA and PHY configuration are consistent and it is safe
699 * to enable PLCA. Returns 0 on success or a negative value if the PLCA or PHY
700 * configuration is not consistent.
701 */
702static int plca_check_valid(struct phy_device *phydev,
703 const struct phy_plca_cfg *plca_cfg,
704 struct netlink_ext_ack *extack)
705{
706 int ret = 0;
707
708 if (!linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1S_P2MP_Half_BIT,
709 phydev->advertising)) {
710 ret = -EOPNOTSUPP;
711 NL_SET_ERR_MSG(extack,
712 "Point to Multi-Point mode is not enabled");
713 } else if (plca_cfg->node_id >= 255) {
714 NL_SET_ERR_MSG(extack, "PLCA node ID is not set");
715 ret = -EINVAL;
716 }
717
718 return ret;
719}
720
721/**
722 * phy_ethtool_set_plca_cfg - Set PLCA RS configuration
723 * @phydev: the phy_device struct
724 * @plca_cfg: new PLCA configuration to apply
725 * @extack: extack for reporting useful error messages
726 *
727 * Sets the PLCA configuration in the PHY. Return 0 on success or a
728 * negative value if an error occurred.
729 */
730int phy_ethtool_set_plca_cfg(struct phy_device *phydev,
731 const struct phy_plca_cfg *plca_cfg,
732 struct netlink_ext_ack *extack)
733{
734 struct phy_plca_cfg *curr_plca_cfg;
735 int ret;
736
737 if (!phydev->drv) {
738 ret = -EIO;
739 goto out;
740 }
741
742 if (!phydev->drv->set_plca_cfg ||
743 !phydev->drv->get_plca_cfg) {
744 ret = -EOPNOTSUPP;
745 goto out;
746 }
747
748 curr_plca_cfg = kmalloc(sizeof(*curr_plca_cfg), GFP_KERNEL);
749 if (!curr_plca_cfg) {
750 ret = -ENOMEM;
751 goto out;
752 }
753
754 mutex_lock(&phydev->lock);
755
756 ret = phydev->drv->get_plca_cfg(phydev, curr_plca_cfg);
757 if (ret)
758 goto out_drv;
759
760 if (curr_plca_cfg->enabled < 0 && plca_cfg->enabled >= 0) {
761 NL_SET_ERR_MSG(extack,
762 "PHY does not support changing the PLCA 'enable' attribute");
763 ret = -EINVAL;
764 goto out_drv;
765 }
766
767 if (curr_plca_cfg->node_id < 0 && plca_cfg->node_id >= 0) {
768 NL_SET_ERR_MSG(extack,
769 "PHY does not support changing the PLCA 'local node ID' attribute");
770 ret = -EINVAL;
771 goto out_drv;
772 }
773
774 if (curr_plca_cfg->node_cnt < 0 && plca_cfg->node_cnt >= 0) {
775 NL_SET_ERR_MSG(extack,
776 "PHY does not support changing the PLCA 'node count' attribute");
777 ret = -EINVAL;
778 goto out_drv;
779 }
780
781 if (curr_plca_cfg->to_tmr < 0 && plca_cfg->to_tmr >= 0) {
782 NL_SET_ERR_MSG(extack,
783 "PHY does not support changing the PLCA 'TO timer' attribute");
784 ret = -EINVAL;
785 goto out_drv;
786 }
787
788 if (curr_plca_cfg->burst_cnt < 0 && plca_cfg->burst_cnt >= 0) {
789 NL_SET_ERR_MSG(extack,
790 "PHY does not support changing the PLCA 'burst count' attribute");
791 ret = -EINVAL;
792 goto out_drv;
793 }
794
795 if (curr_plca_cfg->burst_tmr < 0 && plca_cfg->burst_tmr >= 0) {
796 NL_SET_ERR_MSG(extack,
797 "PHY does not support changing the PLCA 'burst timer' attribute");
798 ret = -EINVAL;
799 goto out_drv;
800 }
801
802 // if enabling PLCA, perform a few sanity checks
803 if (plca_cfg->enabled > 0) {
804 // allow setting node_id concurrently with enabled
805 if (plca_cfg->node_id >= 0)
806 curr_plca_cfg->node_id = plca_cfg->node_id;
807
808 ret = plca_check_valid(phydev, curr_plca_cfg, extack);
809 if (ret)
810 goto out_drv;
811 }
812
813 ret = phydev->drv->set_plca_cfg(phydev, plca_cfg);
814
815out_drv:
816 kfree(curr_plca_cfg);
817 mutex_unlock(&phydev->lock);
818out:
819 return ret;
820}
821
822/**
823 * phy_ethtool_get_plca_status - Get PLCA RS status information
824 * @phydev: the phy_device struct
825 * @plca_st: where to store the retrieved status information
826 *
827 * Retrieve the PLCA status information from the PHY. Return 0 on success or a
828 * negative value if an error occurred.
829 */
830int phy_ethtool_get_plca_status(struct phy_device *phydev,
831 struct phy_plca_status *plca_st)
832{
833 int ret;
834
835 if (!phydev->drv) {
836 ret = -EIO;
837 goto out;
838 }
839
840 if (!phydev->drv->get_plca_status) {
841 ret = -EOPNOTSUPP;
842 goto out;
843 }
844
845 mutex_lock(&phydev->lock);
846 ret = phydev->drv->get_plca_status(phydev, plca_st);
847
848 mutex_unlock(&phydev->lock);
849out:
850 return ret;
851}
852
853/**
854 * phy_start_cable_test - Start a cable test
855 *
856 * @phydev: the phy_device struct
857 * @extack: extack for reporting useful error messages
858 */
859int phy_start_cable_test(struct phy_device *phydev,
860 struct netlink_ext_ack *extack)
861{
862 struct net_device *dev = phydev->attached_dev;
863 int err = -ENOMEM;
864
865 if (!(phydev->drv &&
866 phydev->drv->cable_test_start &&
867 phydev->drv->cable_test_get_status)) {
868 NL_SET_ERR_MSG(extack,
869 "PHY driver does not support cable testing");
870 return -EOPNOTSUPP;
871 }
872
873 mutex_lock(&phydev->lock);
874 if (phydev->state == PHY_CABLETEST) {
875 NL_SET_ERR_MSG(extack,
876 "PHY already performing a test");
877 err = -EBUSY;
878 goto out;
879 }
880
881 if (phydev->state < PHY_UP ||
882 phydev->state > PHY_CABLETEST) {
883 NL_SET_ERR_MSG(extack,
884 "PHY not configured. Try setting interface up");
885 err = -EBUSY;
886 goto out;
887 }
888
889 err = ethnl_cable_test_alloc(phydev, ETHTOOL_MSG_CABLE_TEST_NTF);
890 if (err)
891 goto out;
892
893 /* Mark the carrier down until the test is complete */
894 phy_link_down(phydev);
895
896 netif_testing_on(dev);
897 err = phydev->drv->cable_test_start(phydev);
898 if (err) {
899 netif_testing_off(dev);
900 phy_link_up(phydev);
901 goto out_free;
902 }
903
904 phydev->state = PHY_CABLETEST;
905
906 if (phy_polling_mode(phydev))
907 phy_trigger_machine(phydev);
908
909 mutex_unlock(&phydev->lock);
910
911 return 0;
912
913out_free:
914 ethnl_cable_test_free(phydev);
915out:
916 mutex_unlock(&phydev->lock);
917
918 return err;
919}
920EXPORT_SYMBOL(phy_start_cable_test);
921
922/**
923 * phy_start_cable_test_tdr - Start a raw TDR cable test
924 *
925 * @phydev: the phy_device struct
926 * @extack: extack for reporting useful error messages
927 * @config: Configuration of the test to run
928 */
929int phy_start_cable_test_tdr(struct phy_device *phydev,
930 struct netlink_ext_ack *extack,
931 const struct phy_tdr_config *config)
932{
933 struct net_device *dev = phydev->attached_dev;
934 int err = -ENOMEM;
935
936 if (!(phydev->drv &&
937 phydev->drv->cable_test_tdr_start &&
938 phydev->drv->cable_test_get_status)) {
939 NL_SET_ERR_MSG(extack,
940 "PHY driver does not support cable test TDR");
941 return -EOPNOTSUPP;
942 }
943
944 mutex_lock(&phydev->lock);
945 if (phydev->state == PHY_CABLETEST) {
946 NL_SET_ERR_MSG(extack,
947 "PHY already performing a test");
948 err = -EBUSY;
949 goto out;
950 }
951
952 if (phydev->state < PHY_UP ||
953 phydev->state > PHY_CABLETEST) {
954 NL_SET_ERR_MSG(extack,
955 "PHY not configured. Try setting interface up");
956 err = -EBUSY;
957 goto out;
958 }
959
960 err = ethnl_cable_test_alloc(phydev, ETHTOOL_MSG_CABLE_TEST_TDR_NTF);
961 if (err)
962 goto out;
963
964 /* Mark the carrier down until the test is complete */
965 phy_link_down(phydev);
966
967 netif_testing_on(dev);
968 err = phydev->drv->cable_test_tdr_start(phydev, config);
969 if (err) {
970 netif_testing_off(dev);
971 phy_link_up(phydev);
972 goto out_free;
973 }
974
975 phydev->state = PHY_CABLETEST;
976
977 if (phy_polling_mode(phydev))
978 phy_trigger_machine(phydev);
979
980 mutex_unlock(&phydev->lock);
981
982 return 0;
983
984out_free:
985 ethnl_cable_test_free(phydev);
986out:
987 mutex_unlock(&phydev->lock);
988
989 return err;
990}
991EXPORT_SYMBOL(phy_start_cable_test_tdr);
992
993int phy_config_aneg(struct phy_device *phydev)
994{
995 if (phydev->drv->config_aneg)
996 return phydev->drv->config_aneg(phydev);
997
998 /* Clause 45 PHYs that don't implement Clause 22 registers are not
999 * allowed to call genphy_config_aneg()
1000 */
1001 if (phydev->is_c45 && !(phydev->c45_ids.devices_in_package & BIT(0)))
1002 return genphy_c45_config_aneg(phydev);
1003
1004 return genphy_config_aneg(phydev);
1005}
1006EXPORT_SYMBOL(phy_config_aneg);
1007
1008/**
1009 * phy_check_link_status - check link status and set state accordingly
1010 * @phydev: the phy_device struct
1011 *
1012 * Description: Check for link and whether autoneg was triggered / is running
1013 * and set state accordingly
1014 */
1015static int phy_check_link_status(struct phy_device *phydev)
1016{
1017 int err;
1018
1019 lockdep_assert_held(&phydev->lock);
1020
1021 /* Keep previous state if loopback is enabled because some PHYs
1022 * report that Link is Down when loopback is enabled.
1023 */
1024 if (phydev->loopback_enabled)
1025 return 0;
1026
1027 err = phy_read_status(phydev);
1028 if (err)
1029 return err;
1030
1031 if (phydev->link && phydev->state != PHY_RUNNING) {
1032 phy_check_downshift(phydev);
1033 phydev->state = PHY_RUNNING;
1034 err = genphy_c45_eee_is_active(phydev,
1035 NULL, NULL, NULL);
1036 phydev->eee_active = err > 0;
1037 phydev->enable_tx_lpi = phydev->eee_cfg.tx_lpi_enabled &&
1038 phydev->eee_active;
1039
1040 phy_link_up(phydev);
1041 } else if (!phydev->link && phydev->state != PHY_NOLINK) {
1042 phydev->state = PHY_NOLINK;
1043 phydev->eee_active = false;
1044 phydev->enable_tx_lpi = false;
1045 phy_link_down(phydev);
1046 }
1047
1048 return 0;
1049}
1050
1051/**
1052 * _phy_start_aneg - start auto-negotiation for this PHY device
1053 * @phydev: the phy_device struct
1054 *
1055 * Description: Sanitizes the settings (if we're not autonegotiating
1056 * them), and then calls the driver's config_aneg function.
1057 * If the PHYCONTROL Layer is operating, we change the state to
1058 * reflect the beginning of Auto-negotiation or forcing.
1059 */
1060int _phy_start_aneg(struct phy_device *phydev)
1061{
1062 int err;
1063
1064 lockdep_assert_held(&phydev->lock);
1065
1066 if (!phydev->drv)
1067 return -EIO;
1068
1069 if (AUTONEG_DISABLE == phydev->autoneg)
1070 phy_sanitize_settings(phydev);
1071
1072 err = phy_config_aneg(phydev);
1073 if (err < 0)
1074 return err;
1075
1076 if (phy_is_started(phydev))
1077 err = phy_check_link_status(phydev);
1078
1079 return err;
1080}
1081EXPORT_SYMBOL(_phy_start_aneg);
1082
1083/**
1084 * phy_start_aneg - start auto-negotiation for this PHY device
1085 * @phydev: the phy_device struct
1086 *
1087 * Description: Sanitizes the settings (if we're not autonegotiating
1088 * them), and then calls the driver's config_aneg function.
1089 * If the PHYCONTROL Layer is operating, we change the state to
1090 * reflect the beginning of Auto-negotiation or forcing.
1091 */
1092int phy_start_aneg(struct phy_device *phydev)
1093{
1094 int err;
1095
1096 mutex_lock(&phydev->lock);
1097 err = _phy_start_aneg(phydev);
1098 mutex_unlock(&phydev->lock);
1099
1100 return err;
1101}
1102EXPORT_SYMBOL(phy_start_aneg);
1103
1104static int phy_poll_aneg_done(struct phy_device *phydev)
1105{
1106 unsigned int retries = 100;
1107 int ret;
1108
1109 do {
1110 msleep(100);
1111 ret = phy_aneg_done(phydev);
1112 } while (!ret && --retries);
1113
1114 if (!ret)
1115 return -ETIMEDOUT;
1116
1117 return ret < 0 ? ret : 0;
1118}
1119
1120int phy_ethtool_ksettings_set(struct phy_device *phydev,
1121 const struct ethtool_link_ksettings *cmd)
1122{
1123 __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
1124 u8 autoneg = cmd->base.autoneg;
1125 u8 duplex = cmd->base.duplex;
1126 u32 speed = cmd->base.speed;
1127
1128 if (cmd->base.phy_address != phydev->mdio.addr)
1129 return -EINVAL;
1130
1131 linkmode_copy(advertising, cmd->link_modes.advertising);
1132
1133 /* We make sure that we don't pass unsupported values in to the PHY */
1134 linkmode_and(advertising, advertising, phydev->supported);
1135
1136 /* Verify the settings we care about. */
1137 if (autoneg != AUTONEG_ENABLE && autoneg != AUTONEG_DISABLE)
1138 return -EINVAL;
1139
1140 if (autoneg == AUTONEG_ENABLE &&
1141 (linkmode_empty(advertising) ||
1142 !linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
1143 phydev->supported)))
1144 return -EINVAL;
1145
1146 if (autoneg == AUTONEG_DISABLE &&
1147 ((speed != SPEED_1000 &&
1148 speed != SPEED_100 &&
1149 speed != SPEED_10) ||
1150 (duplex != DUPLEX_HALF &&
1151 duplex != DUPLEX_FULL)))
1152 return -EINVAL;
1153
1154 mutex_lock(&phydev->lock);
1155 phydev->autoneg = autoneg;
1156
1157 if (autoneg == AUTONEG_DISABLE) {
1158 phydev->speed = speed;
1159 phydev->duplex = duplex;
1160 }
1161
1162 linkmode_copy(phydev->advertising, advertising);
1163
1164 linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
1165 phydev->advertising, autoneg == AUTONEG_ENABLE);
1166
1167 phydev->master_slave_set = cmd->base.master_slave_cfg;
1168 phydev->mdix_ctrl = cmd->base.eth_tp_mdix_ctrl;
1169
1170 /* Restart the PHY */
1171 if (phy_is_started(phydev)) {
1172 phydev->state = PHY_UP;
1173 phy_trigger_machine(phydev);
1174 } else {
1175 _phy_start_aneg(phydev);
1176 }
1177
1178 mutex_unlock(&phydev->lock);
1179 return 0;
1180}
1181EXPORT_SYMBOL(phy_ethtool_ksettings_set);
1182
1183/**
1184 * phy_speed_down - set speed to lowest speed supported by both link partners
1185 * @phydev: the phy_device struct
1186 * @sync: perform action synchronously
1187 *
1188 * Description: Typically used to save energy when waiting for a WoL packet
1189 *
1190 * WARNING: Setting sync to false may cause the system being unable to suspend
1191 * in case the PHY generates an interrupt when finishing the autonegotiation.
1192 * This interrupt may wake up the system immediately after suspend.
1193 * Therefore use sync = false only if you're sure it's safe with the respective
1194 * network chip.
1195 */
1196int phy_speed_down(struct phy_device *phydev, bool sync)
1197{
1198 __ETHTOOL_DECLARE_LINK_MODE_MASK(adv_tmp);
1199 int ret = 0;
1200
1201 mutex_lock(&phydev->lock);
1202
1203 if (phydev->autoneg != AUTONEG_ENABLE)
1204 goto out;
1205
1206 linkmode_copy(adv_tmp, phydev->advertising);
1207
1208 ret = phy_speed_down_core(phydev);
1209 if (ret)
1210 goto out;
1211
1212 linkmode_copy(phydev->adv_old, adv_tmp);
1213
1214 if (linkmode_equal(phydev->advertising, adv_tmp)) {
1215 ret = 0;
1216 goto out;
1217 }
1218
1219 ret = phy_config_aneg(phydev);
1220 if (ret)
1221 goto out;
1222
1223 ret = sync ? phy_poll_aneg_done(phydev) : 0;
1224out:
1225 mutex_unlock(&phydev->lock);
1226
1227 return ret;
1228}
1229EXPORT_SYMBOL_GPL(phy_speed_down);
1230
1231/**
1232 * phy_speed_up - (re)set advertised speeds to all supported speeds
1233 * @phydev: the phy_device struct
1234 *
1235 * Description: Used to revert the effect of phy_speed_down
1236 */
1237int phy_speed_up(struct phy_device *phydev)
1238{
1239 __ETHTOOL_DECLARE_LINK_MODE_MASK(adv_tmp);
1240 int ret = 0;
1241
1242 mutex_lock(&phydev->lock);
1243
1244 if (phydev->autoneg != AUTONEG_ENABLE)
1245 goto out;
1246
1247 if (linkmode_empty(phydev->adv_old))
1248 goto out;
1249
1250 linkmode_copy(adv_tmp, phydev->advertising);
1251 linkmode_copy(phydev->advertising, phydev->adv_old);
1252 linkmode_zero(phydev->adv_old);
1253
1254 if (linkmode_equal(phydev->advertising, adv_tmp))
1255 goto out;
1256
1257 ret = phy_config_aneg(phydev);
1258out:
1259 mutex_unlock(&phydev->lock);
1260
1261 return ret;
1262}
1263EXPORT_SYMBOL_GPL(phy_speed_up);
1264
1265/**
1266 * phy_start_machine - start PHY state machine tracking
1267 * @phydev: the phy_device struct
1268 *
1269 * Description: The PHY infrastructure can run a state machine
1270 * which tracks whether the PHY is starting up, negotiating,
1271 * etc. This function starts the delayed workqueue which tracks
1272 * the state of the PHY. If you want to maintain your own state machine,
1273 * do not call this function.
1274 */
1275void phy_start_machine(struct phy_device *phydev)
1276{
1277 phy_trigger_machine(phydev);
1278}
1279EXPORT_SYMBOL_GPL(phy_start_machine);
1280
1281/**
1282 * phy_stop_machine - stop the PHY state machine tracking
1283 * @phydev: target phy_device struct
1284 *
1285 * Description: Stops the state machine delayed workqueue, sets the
1286 * state to UP (unless it wasn't up yet). This function must be
1287 * called BEFORE phy_detach.
1288 */
1289void phy_stop_machine(struct phy_device *phydev)
1290{
1291 cancel_delayed_work_sync(&phydev->state_queue);
1292
1293 mutex_lock(&phydev->lock);
1294 if (phy_is_started(phydev))
1295 phydev->state = PHY_UP;
1296 mutex_unlock(&phydev->lock);
1297}
1298
1299static void phy_process_error(struct phy_device *phydev)
1300{
1301 /* phydev->lock must be held for the state change to be safe */
1302 if (!mutex_is_locked(&phydev->lock))
1303 phydev_err(phydev, "PHY-device data unsafe context\n");
1304
1305 phydev->state = PHY_ERROR;
1306
1307 phy_trigger_machine(phydev);
1308}
1309
1310static void phy_error_precise(struct phy_device *phydev,
1311 const void *func, int err)
1312{
1313 WARN(1, "%pS: returned: %d\n", func, err);
1314 phy_process_error(phydev);
1315}
1316
1317/**
1318 * phy_error - enter ERROR state for this PHY device
1319 * @phydev: target phy_device struct
1320 *
1321 * Moves the PHY to the ERROR state in response to a read
1322 * or write error, and tells the controller the link is down.
1323 * Must be called with phydev->lock held.
1324 */
1325void phy_error(struct phy_device *phydev)
1326{
1327 WARN_ON(1);
1328 phy_process_error(phydev);
1329}
1330EXPORT_SYMBOL(phy_error);
1331
1332/**
1333 * phy_disable_interrupts - Disable the PHY interrupts from the PHY side
1334 * @phydev: target phy_device struct
1335 */
1336int phy_disable_interrupts(struct phy_device *phydev)
1337{
1338 /* Disable PHY interrupts */
1339 return phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
1340}
1341
1342/**
1343 * phy_interrupt - PHY interrupt handler
1344 * @irq: interrupt line
1345 * @phy_dat: phy_device pointer
1346 *
1347 * Description: Handle PHY interrupt
1348 */
1349static irqreturn_t phy_interrupt(int irq, void *phy_dat)
1350{
1351 struct phy_device *phydev = phy_dat;
1352 irqreturn_t ret;
1353
1354 /* Wakeup interrupts may occur during a system sleep transition.
1355 * Postpone handling until the PHY has resumed.
1356 */
1357 if (IS_ENABLED(CONFIG_PM_SLEEP) && phydev->irq_suspended) {
1358 struct net_device *netdev = phydev->attached_dev;
1359
1360 if (netdev) {
1361 struct device *parent = netdev->dev.parent;
1362
1363 if (netdev->ethtool->wol_enabled)
1364 pm_system_wakeup();
1365 else if (device_may_wakeup(&netdev->dev))
1366 pm_wakeup_dev_event(&netdev->dev, 0, true);
1367 else if (parent && device_may_wakeup(parent))
1368 pm_wakeup_dev_event(parent, 0, true);
1369 }
1370
1371 phydev->irq_rerun = 1;
1372 disable_irq_nosync(irq);
1373 return IRQ_HANDLED;
1374 }
1375
1376 mutex_lock(&phydev->lock);
1377 ret = phydev->drv->handle_interrupt(phydev);
1378 mutex_unlock(&phydev->lock);
1379
1380 return ret;
1381}
1382
1383/**
1384 * phy_enable_interrupts - Enable the interrupts from the PHY side
1385 * @phydev: target phy_device struct
1386 */
1387static int phy_enable_interrupts(struct phy_device *phydev)
1388{
1389 return phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
1390}
1391
1392/**
1393 * phy_request_interrupt - request and enable interrupt for a PHY device
1394 * @phydev: target phy_device struct
1395 *
1396 * Description: Request and enable the interrupt for the given PHY.
1397 * If this fails, then we set irq to PHY_POLL.
1398 * This should only be called with a valid IRQ number.
1399 */
1400void phy_request_interrupt(struct phy_device *phydev)
1401{
1402 int err;
1403
1404 err = request_threaded_irq(phydev->irq, NULL, phy_interrupt,
1405 IRQF_ONESHOT | IRQF_SHARED,
1406 phydev_name(phydev), phydev);
1407 if (err) {
1408 phydev_warn(phydev, "Error %d requesting IRQ %d, falling back to polling\n",
1409 err, phydev->irq);
1410 phydev->irq = PHY_POLL;
1411 } else {
1412 if (phy_enable_interrupts(phydev)) {
1413 phydev_warn(phydev, "Can't enable interrupt, falling back to polling\n");
1414 phy_free_interrupt(phydev);
1415 phydev->irq = PHY_POLL;
1416 }
1417 }
1418}
1419EXPORT_SYMBOL(phy_request_interrupt);
1420
1421/**
1422 * phy_free_interrupt - disable and free interrupt for a PHY device
1423 * @phydev: target phy_device struct
1424 *
1425 * Description: Disable and free the interrupt for the given PHY.
1426 * This should only be called with a valid IRQ number.
1427 */
1428void phy_free_interrupt(struct phy_device *phydev)
1429{
1430 phy_disable_interrupts(phydev);
1431 free_irq(phydev->irq, phydev);
1432}
1433EXPORT_SYMBOL(phy_free_interrupt);
1434
1435enum phy_state_work {
1436 PHY_STATE_WORK_NONE,
1437 PHY_STATE_WORK_ANEG,
1438 PHY_STATE_WORK_SUSPEND,
1439};
1440
1441static enum phy_state_work _phy_state_machine(struct phy_device *phydev)
1442{
1443 enum phy_state_work state_work = PHY_STATE_WORK_NONE;
1444 struct net_device *dev = phydev->attached_dev;
1445 enum phy_state old_state = phydev->state;
1446 const void *func = NULL;
1447 bool finished = false;
1448 int err = 0;
1449
1450 switch (phydev->state) {
1451 case PHY_DOWN:
1452 case PHY_READY:
1453 break;
1454 case PHY_UP:
1455 state_work = PHY_STATE_WORK_ANEG;
1456 break;
1457 case PHY_NOLINK:
1458 case PHY_RUNNING:
1459 err = phy_check_link_status(phydev);
1460 func = &phy_check_link_status;
1461 break;
1462 case PHY_CABLETEST:
1463 err = phydev->drv->cable_test_get_status(phydev, &finished);
1464 if (err) {
1465 phy_abort_cable_test(phydev);
1466 netif_testing_off(dev);
1467 state_work = PHY_STATE_WORK_ANEG;
1468 phydev->state = PHY_UP;
1469 break;
1470 }
1471
1472 if (finished) {
1473 ethnl_cable_test_finished(phydev);
1474 netif_testing_off(dev);
1475 state_work = PHY_STATE_WORK_ANEG;
1476 phydev->state = PHY_UP;
1477 }
1478 break;
1479 case PHY_HALTED:
1480 case PHY_ERROR:
1481 if (phydev->link) {
1482 phydev->link = 0;
1483 phy_link_down(phydev);
1484 }
1485 state_work = PHY_STATE_WORK_SUSPEND;
1486 break;
1487 }
1488
1489 if (state_work == PHY_STATE_WORK_ANEG) {
1490 err = _phy_start_aneg(phydev);
1491 func = &_phy_start_aneg;
1492 }
1493
1494 if (err == -ENODEV)
1495 return state_work;
1496
1497 if (err < 0)
1498 phy_error_precise(phydev, func, err);
1499
1500 phy_process_state_change(phydev, old_state);
1501
1502 /* Only re-schedule a PHY state machine change if we are polling the
1503 * PHY, if PHY_MAC_INTERRUPT is set, then we will be moving
1504 * between states from phy_mac_interrupt().
1505 *
1506 * In state PHY_HALTED the PHY gets suspended, so rescheduling the
1507 * state machine would be pointless and possibly error prone when
1508 * called from phy_disconnect() synchronously.
1509 */
1510 if (phy_polling_mode(phydev) && phy_is_started(phydev))
1511 phy_queue_state_machine(phydev, PHY_STATE_TIME);
1512
1513 return state_work;
1514}
1515
1516/* unlocked part of the PHY state machine */
1517static void _phy_state_machine_post_work(struct phy_device *phydev,
1518 enum phy_state_work state_work)
1519{
1520 if (state_work == PHY_STATE_WORK_SUSPEND)
1521 phy_suspend(phydev);
1522}
1523
1524/**
1525 * phy_state_machine - Handle the state machine
1526 * @work: work_struct that describes the work to be done
1527 */
1528void phy_state_machine(struct work_struct *work)
1529{
1530 struct delayed_work *dwork = to_delayed_work(work);
1531 struct phy_device *phydev =
1532 container_of(dwork, struct phy_device, state_queue);
1533 enum phy_state_work state_work;
1534
1535 mutex_lock(&phydev->lock);
1536 state_work = _phy_state_machine(phydev);
1537 mutex_unlock(&phydev->lock);
1538
1539 _phy_state_machine_post_work(phydev, state_work);
1540}
1541
1542/**
1543 * phy_stop - Bring down the PHY link, and stop checking the status
1544 * @phydev: target phy_device struct
1545 */
1546void phy_stop(struct phy_device *phydev)
1547{
1548 struct net_device *dev = phydev->attached_dev;
1549 enum phy_state_work state_work;
1550 enum phy_state old_state;
1551
1552 if (!phy_is_started(phydev) && phydev->state != PHY_DOWN &&
1553 phydev->state != PHY_ERROR) {
1554 WARN(1, "called from state %s\n",
1555 phy_state_to_str(phydev->state));
1556 return;
1557 }
1558
1559 mutex_lock(&phydev->lock);
1560 old_state = phydev->state;
1561
1562 if (phydev->state == PHY_CABLETEST) {
1563 phy_abort_cable_test(phydev);
1564 netif_testing_off(dev);
1565 }
1566
1567 if (phydev->sfp_bus)
1568 sfp_upstream_stop(phydev->sfp_bus);
1569
1570 phydev->state = PHY_HALTED;
1571 phy_process_state_change(phydev, old_state);
1572
1573 state_work = _phy_state_machine(phydev);
1574 mutex_unlock(&phydev->lock);
1575
1576 _phy_state_machine_post_work(phydev, state_work);
1577 phy_stop_machine(phydev);
1578
1579 /* Cannot call flush_scheduled_work() here as desired because
1580 * of rtnl_lock(), but PHY_HALTED shall guarantee irq handler
1581 * will not reenable interrupts.
1582 */
1583}
1584EXPORT_SYMBOL(phy_stop);
1585
1586/**
1587 * phy_start - start or restart a PHY device
1588 * @phydev: target phy_device struct
1589 *
1590 * Description: Indicates the attached device's readiness to
1591 * handle PHY-related work. Used during startup to start the
1592 * PHY, and after a call to phy_stop() to resume operation.
1593 * Also used to indicate the MDIO bus has cleared an error
1594 * condition.
1595 */
1596void phy_start(struct phy_device *phydev)
1597{
1598 mutex_lock(&phydev->lock);
1599
1600 if (phydev->state != PHY_READY && phydev->state != PHY_HALTED) {
1601 WARN(1, "called from state %s\n",
1602 phy_state_to_str(phydev->state));
1603 goto out;
1604 }
1605
1606 if (phydev->sfp_bus)
1607 sfp_upstream_start(phydev->sfp_bus);
1608
1609 /* if phy was suspended, bring the physical link up again */
1610 __phy_resume(phydev);
1611
1612 phydev->state = PHY_UP;
1613
1614 phy_start_machine(phydev);
1615out:
1616 mutex_unlock(&phydev->lock);
1617}
1618EXPORT_SYMBOL(phy_start);
1619
1620/**
1621 * phy_mac_interrupt - MAC says the link has changed
1622 * @phydev: phy_device struct with changed link
1623 *
1624 * The MAC layer is able to indicate there has been a change in the PHY link
1625 * status. Trigger the state machine and work a work queue.
1626 */
1627void phy_mac_interrupt(struct phy_device *phydev)
1628{
1629 /* Trigger a state machine change */
1630 phy_trigger_machine(phydev);
1631}
1632EXPORT_SYMBOL(phy_mac_interrupt);
1633
1634/**
1635 * phy_init_eee - init and check the EEE feature
1636 * @phydev: target phy_device struct
1637 * @clk_stop_enable: PHY may stop the clock during LPI
1638 *
1639 * Description: it checks if the Energy-Efficient Ethernet (EEE)
1640 * is supported by looking at the MMD registers 3.20 and 7.60/61
1641 * and it programs the MMD register 3.0 setting the "Clock stop enable"
1642 * bit if required.
1643 */
1644int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
1645{
1646 int ret;
1647
1648 if (!phydev->drv)
1649 return -EIO;
1650
1651 ret = genphy_c45_eee_is_active(phydev, NULL, NULL, NULL);
1652 if (ret < 0)
1653 return ret;
1654 if (!ret)
1655 return -EPROTONOSUPPORT;
1656
1657 if (clk_stop_enable)
1658 /* Configure the PHY to stop receiving xMII
1659 * clock while it is signaling LPI.
1660 */
1661 ret = phy_set_bits_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1,
1662 MDIO_PCS_CTRL1_CLKSTOP_EN);
1663
1664 return ret < 0 ? ret : 0;
1665}
1666EXPORT_SYMBOL(phy_init_eee);
1667
1668/**
1669 * phy_get_eee_err - report the EEE wake error count
1670 * @phydev: target phy_device struct
1671 *
1672 * Description: it is to report the number of time where the PHY
1673 * failed to complete its normal wake sequence.
1674 */
1675int phy_get_eee_err(struct phy_device *phydev)
1676{
1677 int ret;
1678
1679 if (!phydev->drv)
1680 return -EIO;
1681
1682 mutex_lock(&phydev->lock);
1683 ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_WK_ERR);
1684 mutex_unlock(&phydev->lock);
1685
1686 return ret;
1687}
1688EXPORT_SYMBOL(phy_get_eee_err);
1689
1690/**
1691 * phy_ethtool_get_eee - get EEE supported and status
1692 * @phydev: target phy_device struct
1693 * @data: ethtool_keee data
1694 *
1695 * Description: reports the Supported/Advertisement/LP Advertisement
1696 * capabilities, etc.
1697 */
1698int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_keee *data)
1699{
1700 int ret;
1701
1702 if (!phydev->drv)
1703 return -EIO;
1704
1705 mutex_lock(&phydev->lock);
1706 ret = genphy_c45_ethtool_get_eee(phydev, data);
1707 eeecfg_to_eee(data, &phydev->eee_cfg);
1708 mutex_unlock(&phydev->lock);
1709
1710 return ret;
1711}
1712EXPORT_SYMBOL(phy_ethtool_get_eee);
1713
1714/**
1715 * phy_ethtool_set_eee_noneg - Adjusts MAC LPI configuration without PHY
1716 * renegotiation
1717 * @phydev: pointer to the target PHY device structure
1718 * @old_cfg: pointer to the eee_config structure containing the old EEE settings
1719 *
1720 * This function updates the Energy Efficient Ethernet (EEE) configuration
1721 * for cases where only the MAC's Low Power Idle (LPI) configuration changes,
1722 * without triggering PHY renegotiation. It ensures that the MAC is properly
1723 * informed of the new LPI settings by cycling the link down and up, which
1724 * is necessary for the MAC to adopt the new configuration. This adjustment
1725 * is done only if there is a change in the tx_lpi_enabled or tx_lpi_timer
1726 * configuration.
1727 */
1728static void phy_ethtool_set_eee_noneg(struct phy_device *phydev,
1729 const struct eee_config *old_cfg)
1730{
1731 bool enable_tx_lpi;
1732
1733 if (!phydev->link)
1734 return;
1735
1736 enable_tx_lpi = phydev->eee_cfg.tx_lpi_enabled && phydev->eee_active;
1737
1738 if (phydev->enable_tx_lpi != enable_tx_lpi ||
1739 phydev->eee_cfg.tx_lpi_timer != old_cfg->tx_lpi_timer) {
1740 phydev->enable_tx_lpi = false;
1741 phydev->link = false;
1742 phy_link_down(phydev);
1743 phydev->enable_tx_lpi = enable_tx_lpi;
1744 phydev->link = true;
1745 phy_link_up(phydev);
1746 }
1747}
1748
1749/**
1750 * phy_ethtool_set_eee - set EEE supported and status
1751 * @phydev: target phy_device struct
1752 * @data: ethtool_keee data
1753 *
1754 * Description: it is to program the Advertisement EEE register.
1755 */
1756int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_keee *data)
1757{
1758 struct eee_config old_cfg;
1759 int ret;
1760
1761 if (!phydev->drv)
1762 return -EIO;
1763
1764 mutex_lock(&phydev->lock);
1765
1766 old_cfg = phydev->eee_cfg;
1767 eee_to_eeecfg(&phydev->eee_cfg, data);
1768
1769 ret = genphy_c45_ethtool_set_eee(phydev, data);
1770 if (ret == 0)
1771 phy_ethtool_set_eee_noneg(phydev, &old_cfg);
1772 else if (ret < 0)
1773 phydev->eee_cfg = old_cfg;
1774
1775 mutex_unlock(&phydev->lock);
1776
1777 return ret < 0 ? ret : 0;
1778}
1779EXPORT_SYMBOL(phy_ethtool_set_eee);
1780
1781/**
1782 * phy_ethtool_set_wol - Configure Wake On LAN
1783 *
1784 * @phydev: target phy_device struct
1785 * @wol: Configuration requested
1786 */
1787int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
1788{
1789 int ret;
1790
1791 if (phydev->drv && phydev->drv->set_wol) {
1792 mutex_lock(&phydev->lock);
1793 ret = phydev->drv->set_wol(phydev, wol);
1794 mutex_unlock(&phydev->lock);
1795
1796 return ret;
1797 }
1798
1799 return -EOPNOTSUPP;
1800}
1801EXPORT_SYMBOL(phy_ethtool_set_wol);
1802
1803/**
1804 * phy_ethtool_get_wol - Get the current Wake On LAN configuration
1805 *
1806 * @phydev: target phy_device struct
1807 * @wol: Store the current configuration here
1808 */
1809void phy_ethtool_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
1810{
1811 if (phydev->drv && phydev->drv->get_wol) {
1812 mutex_lock(&phydev->lock);
1813 phydev->drv->get_wol(phydev, wol);
1814 mutex_unlock(&phydev->lock);
1815 }
1816}
1817EXPORT_SYMBOL(phy_ethtool_get_wol);
1818
1819int phy_ethtool_get_link_ksettings(struct net_device *ndev,
1820 struct ethtool_link_ksettings *cmd)
1821{
1822 struct phy_device *phydev = ndev->phydev;
1823
1824 if (!phydev)
1825 return -ENODEV;
1826
1827 phy_ethtool_ksettings_get(phydev, cmd);
1828
1829 return 0;
1830}
1831EXPORT_SYMBOL(phy_ethtool_get_link_ksettings);
1832
1833int phy_ethtool_set_link_ksettings(struct net_device *ndev,
1834 const struct ethtool_link_ksettings *cmd)
1835{
1836 struct phy_device *phydev = ndev->phydev;
1837
1838 if (!phydev)
1839 return -ENODEV;
1840
1841 return phy_ethtool_ksettings_set(phydev, cmd);
1842}
1843EXPORT_SYMBOL(phy_ethtool_set_link_ksettings);
1844
1845/**
1846 * phy_ethtool_nway_reset - Restart auto negotiation
1847 * @ndev: Network device to restart autoneg for
1848 */
1849int phy_ethtool_nway_reset(struct net_device *ndev)
1850{
1851 struct phy_device *phydev = ndev->phydev;
1852 int ret;
1853
1854 if (!phydev)
1855 return -ENODEV;
1856
1857 if (!phydev->drv)
1858 return -EIO;
1859
1860 mutex_lock(&phydev->lock);
1861 ret = phy_restart_aneg(phydev);
1862 mutex_unlock(&phydev->lock);
1863
1864 return ret;
1865}
1866EXPORT_SYMBOL(phy_ethtool_nway_reset);
1/* Framework for configuring and reading PHY devices
2 * Based on code in sungem_phy.c and gianfar_phy.c
3 *
4 * Author: Andy Fleming
5 *
6 * Copyright (c) 2004 Freescale Semiconductor, Inc.
7 * Copyright (c) 2006, 2007 Maciej W. Rozycki
8 *
9 * This program is free software; you can redistribute it and/or modify it
10 * under the terms of the GNU General Public License as published by the
11 * Free Software Foundation; either version 2 of the License, or (at your
12 * option) any later version.
13 *
14 */
15
16#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
17
18#include <linux/kernel.h>
19#include <linux/string.h>
20#include <linux/errno.h>
21#include <linux/unistd.h>
22#include <linux/interrupt.h>
23#include <linux/delay.h>
24#include <linux/netdevice.h>
25#include <linux/etherdevice.h>
26#include <linux/skbuff.h>
27#include <linux/mm.h>
28#include <linux/module.h>
29#include <linux/mii.h>
30#include <linux/ethtool.h>
31#include <linux/phy.h>
32#include <linux/phy_led_triggers.h>
33#include <linux/workqueue.h>
34#include <linux/mdio.h>
35#include <linux/io.h>
36#include <linux/uaccess.h>
37#include <linux/atomic.h>
38
39#include <asm/irq.h>
40
41#define PHY_STATE_STR(_state) \
42 case PHY_##_state: \
43 return __stringify(_state); \
44
45static const char *phy_state_to_str(enum phy_state st)
46{
47 switch (st) {
48 PHY_STATE_STR(DOWN)
49 PHY_STATE_STR(STARTING)
50 PHY_STATE_STR(READY)
51 PHY_STATE_STR(PENDING)
52 PHY_STATE_STR(UP)
53 PHY_STATE_STR(AN)
54 PHY_STATE_STR(RUNNING)
55 PHY_STATE_STR(NOLINK)
56 PHY_STATE_STR(FORCING)
57 PHY_STATE_STR(CHANGELINK)
58 PHY_STATE_STR(HALTED)
59 PHY_STATE_STR(RESUMING)
60 }
61
62 return NULL;
63}
64
65
66/**
67 * phy_print_status - Convenience function to print out the current phy status
68 * @phydev: the phy_device struct
69 */
70void phy_print_status(struct phy_device *phydev)
71{
72 if (phydev->link) {
73 netdev_info(phydev->attached_dev,
74 "Link is Up - %s/%s - flow control %s\n",
75 phy_speed_to_str(phydev->speed),
76 phy_duplex_to_str(phydev->duplex),
77 phydev->pause ? "rx/tx" : "off");
78 } else {
79 netdev_info(phydev->attached_dev, "Link is Down\n");
80 }
81}
82EXPORT_SYMBOL(phy_print_status);
83
84/**
85 * phy_clear_interrupt - Ack the phy device's interrupt
86 * @phydev: the phy_device struct
87 *
88 * If the @phydev driver has an ack_interrupt function, call it to
89 * ack and clear the phy device's interrupt.
90 *
91 * Returns 0 on success or < 0 on error.
92 */
93static int phy_clear_interrupt(struct phy_device *phydev)
94{
95 if (phydev->drv->ack_interrupt)
96 return phydev->drv->ack_interrupt(phydev);
97
98 return 0;
99}
100
101/**
102 * phy_config_interrupt - configure the PHY device for the requested interrupts
103 * @phydev: the phy_device struct
104 * @interrupts: interrupt flags to configure for this @phydev
105 *
106 * Returns 0 on success or < 0 on error.
107 */
108static int phy_config_interrupt(struct phy_device *phydev, u32 interrupts)
109{
110 phydev->interrupts = interrupts;
111 if (phydev->drv->config_intr)
112 return phydev->drv->config_intr(phydev);
113
114 return 0;
115}
116
117/**
118 * phy_restart_aneg - restart auto-negotiation
119 * @phydev: target phy_device struct
120 *
121 * Restart the autonegotiation on @phydev. Returns >= 0 on success or
122 * negative errno on error.
123 */
124int phy_restart_aneg(struct phy_device *phydev)
125{
126 int ret;
127
128 if (phydev->is_c45 && !(phydev->c45_ids.devices_in_package & BIT(0)))
129 ret = genphy_c45_restart_aneg(phydev);
130 else
131 ret = genphy_restart_aneg(phydev);
132
133 return ret;
134}
135EXPORT_SYMBOL_GPL(phy_restart_aneg);
136
137/**
138 * phy_aneg_done - return auto-negotiation status
139 * @phydev: target phy_device struct
140 *
141 * Description: Return the auto-negotiation status from this @phydev
142 * Returns > 0 on success or < 0 on error. 0 means that auto-negotiation
143 * is still pending.
144 */
145int phy_aneg_done(struct phy_device *phydev)
146{
147 if (phydev->drv && phydev->drv->aneg_done)
148 return phydev->drv->aneg_done(phydev);
149
150 /* Avoid genphy_aneg_done() if the Clause 45 PHY does not
151 * implement Clause 22 registers
152 */
153 if (phydev->is_c45 && !(phydev->c45_ids.devices_in_package & BIT(0)))
154 return -EINVAL;
155
156 return genphy_aneg_done(phydev);
157}
158EXPORT_SYMBOL(phy_aneg_done);
159
160/**
161 * phy_find_valid - find a PHY setting that matches the requested parameters
162 * @speed: desired speed
163 * @duplex: desired duplex
164 * @supported: mask of supported link modes
165 *
166 * Locate a supported phy setting that is, in priority order:
167 * - an exact match for the specified speed and duplex mode
168 * - a match for the specified speed, or slower speed
169 * - the slowest supported speed
170 * Returns the matched phy_setting entry, or %NULL if no supported phy
171 * settings were found.
172 */
173static const struct phy_setting *
174phy_find_valid(int speed, int duplex, u32 supported)
175{
176 unsigned long mask = supported;
177
178 return phy_lookup_setting(speed, duplex, &mask, BITS_PER_LONG, false);
179}
180
181/**
182 * phy_supported_speeds - return all speeds currently supported by a phy device
183 * @phy: The phy device to return supported speeds of.
184 * @speeds: buffer to store supported speeds in.
185 * @size: size of speeds buffer.
186 *
187 * Description: Returns the number of supported speeds, and fills the speeds
188 * buffer with the supported speeds. If speeds buffer is too small to contain
189 * all currently supported speeds, will return as many speeds as can fit.
190 */
191unsigned int phy_supported_speeds(struct phy_device *phy,
192 unsigned int *speeds,
193 unsigned int size)
194{
195 unsigned long supported = phy->supported;
196
197 return phy_speeds(speeds, size, &supported, BITS_PER_LONG);
198}
199
200/**
201 * phy_check_valid - check if there is a valid PHY setting which matches
202 * speed, duplex, and feature mask
203 * @speed: speed to match
204 * @duplex: duplex to match
205 * @features: A mask of the valid settings
206 *
207 * Description: Returns true if there is a valid setting, false otherwise.
208 */
209static inline bool phy_check_valid(int speed, int duplex, u32 features)
210{
211 unsigned long mask = features;
212
213 return !!phy_lookup_setting(speed, duplex, &mask, BITS_PER_LONG, true);
214}
215
216/**
217 * phy_sanitize_settings - make sure the PHY is set to supported speed and duplex
218 * @phydev: the target phy_device struct
219 *
220 * Description: Make sure the PHY is set to supported speeds and
221 * duplexes. Drop down by one in this order: 1000/FULL,
222 * 1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF.
223 */
224static void phy_sanitize_settings(struct phy_device *phydev)
225{
226 const struct phy_setting *setting;
227 u32 features = phydev->supported;
228
229 /* Sanitize settings based on PHY capabilities */
230 if ((features & SUPPORTED_Autoneg) == 0)
231 phydev->autoneg = AUTONEG_DISABLE;
232
233 setting = phy_find_valid(phydev->speed, phydev->duplex, features);
234 if (setting) {
235 phydev->speed = setting->speed;
236 phydev->duplex = setting->duplex;
237 } else {
238 /* We failed to find anything (no supported speeds?) */
239 phydev->speed = SPEED_UNKNOWN;
240 phydev->duplex = DUPLEX_UNKNOWN;
241 }
242}
243
244/**
245 * phy_ethtool_sset - generic ethtool sset function, handles all the details
246 * @phydev: target phy_device struct
247 * @cmd: ethtool_cmd
248 *
249 * A few notes about parameter checking:
250 *
251 * - We don't set port or transceiver, so we don't care what they
252 * were set to.
253 * - phy_start_aneg() will make sure forced settings are sane, and
254 * choose the next best ones from the ones selected, so we don't
255 * care if ethtool tries to give us bad values.
256 */
257int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd)
258{
259 u32 speed = ethtool_cmd_speed(cmd);
260
261 if (cmd->phy_address != phydev->mdio.addr)
262 return -EINVAL;
263
264 /* We make sure that we don't pass unsupported values in to the PHY */
265 cmd->advertising &= phydev->supported;
266
267 /* Verify the settings we care about. */
268 if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE)
269 return -EINVAL;
270
271 if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0)
272 return -EINVAL;
273
274 if (cmd->autoneg == AUTONEG_DISABLE &&
275 ((speed != SPEED_1000 &&
276 speed != SPEED_100 &&
277 speed != SPEED_10) ||
278 (cmd->duplex != DUPLEX_HALF &&
279 cmd->duplex != DUPLEX_FULL)))
280 return -EINVAL;
281
282 phydev->autoneg = cmd->autoneg;
283
284 phydev->speed = speed;
285
286 phydev->advertising = cmd->advertising;
287
288 if (AUTONEG_ENABLE == cmd->autoneg)
289 phydev->advertising |= ADVERTISED_Autoneg;
290 else
291 phydev->advertising &= ~ADVERTISED_Autoneg;
292
293 phydev->duplex = cmd->duplex;
294
295 phydev->mdix_ctrl = cmd->eth_tp_mdix_ctrl;
296
297 /* Restart the PHY */
298 phy_start_aneg(phydev);
299
300 return 0;
301}
302EXPORT_SYMBOL(phy_ethtool_sset);
303
304int phy_ethtool_ksettings_set(struct phy_device *phydev,
305 const struct ethtool_link_ksettings *cmd)
306{
307 u8 autoneg = cmd->base.autoneg;
308 u8 duplex = cmd->base.duplex;
309 u32 speed = cmd->base.speed;
310 u32 advertising;
311
312 if (cmd->base.phy_address != phydev->mdio.addr)
313 return -EINVAL;
314
315 ethtool_convert_link_mode_to_legacy_u32(&advertising,
316 cmd->link_modes.advertising);
317
318 /* We make sure that we don't pass unsupported values in to the PHY */
319 advertising &= phydev->supported;
320
321 /* Verify the settings we care about. */
322 if (autoneg != AUTONEG_ENABLE && autoneg != AUTONEG_DISABLE)
323 return -EINVAL;
324
325 if (autoneg == AUTONEG_ENABLE && advertising == 0)
326 return -EINVAL;
327
328 if (autoneg == AUTONEG_DISABLE &&
329 ((speed != SPEED_1000 &&
330 speed != SPEED_100 &&
331 speed != SPEED_10) ||
332 (duplex != DUPLEX_HALF &&
333 duplex != DUPLEX_FULL)))
334 return -EINVAL;
335
336 phydev->autoneg = autoneg;
337
338 phydev->speed = speed;
339
340 phydev->advertising = advertising;
341
342 if (autoneg == AUTONEG_ENABLE)
343 phydev->advertising |= ADVERTISED_Autoneg;
344 else
345 phydev->advertising &= ~ADVERTISED_Autoneg;
346
347 phydev->duplex = duplex;
348
349 phydev->mdix_ctrl = cmd->base.eth_tp_mdix_ctrl;
350
351 /* Restart the PHY */
352 phy_start_aneg(phydev);
353
354 return 0;
355}
356EXPORT_SYMBOL(phy_ethtool_ksettings_set);
357
358void phy_ethtool_ksettings_get(struct phy_device *phydev,
359 struct ethtool_link_ksettings *cmd)
360{
361 ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
362 phydev->supported);
363
364 ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
365 phydev->advertising);
366
367 ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.lp_advertising,
368 phydev->lp_advertising);
369
370 cmd->base.speed = phydev->speed;
371 cmd->base.duplex = phydev->duplex;
372 if (phydev->interface == PHY_INTERFACE_MODE_MOCA)
373 cmd->base.port = PORT_BNC;
374 else
375 cmd->base.port = PORT_MII;
376 cmd->base.transceiver = phy_is_internal(phydev) ?
377 XCVR_INTERNAL : XCVR_EXTERNAL;
378 cmd->base.phy_address = phydev->mdio.addr;
379 cmd->base.autoneg = phydev->autoneg;
380 cmd->base.eth_tp_mdix_ctrl = phydev->mdix_ctrl;
381 cmd->base.eth_tp_mdix = phydev->mdix;
382}
383EXPORT_SYMBOL(phy_ethtool_ksettings_get);
384
385/**
386 * phy_mii_ioctl - generic PHY MII ioctl interface
387 * @phydev: the phy_device struct
388 * @ifr: &struct ifreq for socket ioctl's
389 * @cmd: ioctl cmd to execute
390 *
391 * Note that this function is currently incompatible with the
392 * PHYCONTROL layer. It changes registers without regard to
393 * current state. Use at own risk.
394 */
395int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd)
396{
397 struct mii_ioctl_data *mii_data = if_mii(ifr);
398 u16 val = mii_data->val_in;
399 bool change_autoneg = false;
400
401 switch (cmd) {
402 case SIOCGMIIPHY:
403 mii_data->phy_id = phydev->mdio.addr;
404 /* fall through */
405
406 case SIOCGMIIREG:
407 mii_data->val_out = mdiobus_read(phydev->mdio.bus,
408 mii_data->phy_id,
409 mii_data->reg_num);
410 return 0;
411
412 case SIOCSMIIREG:
413 if (mii_data->phy_id == phydev->mdio.addr) {
414 switch (mii_data->reg_num) {
415 case MII_BMCR:
416 if ((val & (BMCR_RESET | BMCR_ANENABLE)) == 0) {
417 if (phydev->autoneg == AUTONEG_ENABLE)
418 change_autoneg = true;
419 phydev->autoneg = AUTONEG_DISABLE;
420 if (val & BMCR_FULLDPLX)
421 phydev->duplex = DUPLEX_FULL;
422 else
423 phydev->duplex = DUPLEX_HALF;
424 if (val & BMCR_SPEED1000)
425 phydev->speed = SPEED_1000;
426 else if (val & BMCR_SPEED100)
427 phydev->speed = SPEED_100;
428 else phydev->speed = SPEED_10;
429 }
430 else {
431 if (phydev->autoneg == AUTONEG_DISABLE)
432 change_autoneg = true;
433 phydev->autoneg = AUTONEG_ENABLE;
434 }
435 break;
436 case MII_ADVERTISE:
437 phydev->advertising = mii_adv_to_ethtool_adv_t(val);
438 change_autoneg = true;
439 break;
440 default:
441 /* do nothing */
442 break;
443 }
444 }
445
446 mdiobus_write(phydev->mdio.bus, mii_data->phy_id,
447 mii_data->reg_num, val);
448
449 if (mii_data->phy_id == phydev->mdio.addr &&
450 mii_data->reg_num == MII_BMCR &&
451 val & BMCR_RESET)
452 return phy_init_hw(phydev);
453
454 if (change_autoneg)
455 return phy_start_aneg(phydev);
456
457 return 0;
458
459 case SIOCSHWTSTAMP:
460 if (phydev->drv && phydev->drv->hwtstamp)
461 return phydev->drv->hwtstamp(phydev, ifr);
462 /* fall through */
463
464 default:
465 return -EOPNOTSUPP;
466 }
467}
468EXPORT_SYMBOL(phy_mii_ioctl);
469
470/**
471 * phy_start_aneg_priv - start auto-negotiation for this PHY device
472 * @phydev: the phy_device struct
473 * @sync: indicate whether we should wait for the workqueue cancelation
474 *
475 * Description: Sanitizes the settings (if we're not autonegotiating
476 * them), and then calls the driver's config_aneg function.
477 * If the PHYCONTROL Layer is operating, we change the state to
478 * reflect the beginning of Auto-negotiation or forcing.
479 */
480static int phy_start_aneg_priv(struct phy_device *phydev, bool sync)
481{
482 bool trigger = 0;
483 int err;
484
485 if (!phydev->drv)
486 return -EIO;
487
488 mutex_lock(&phydev->lock);
489
490 if (AUTONEG_DISABLE == phydev->autoneg)
491 phy_sanitize_settings(phydev);
492
493 /* Invalidate LP advertising flags */
494 phydev->lp_advertising = 0;
495
496 if (phydev->drv->config_aneg)
497 err = phydev->drv->config_aneg(phydev);
498 else
499 err = genphy_config_aneg(phydev);
500 if (err < 0)
501 goto out_unlock;
502
503 if (phydev->state != PHY_HALTED) {
504 if (AUTONEG_ENABLE == phydev->autoneg) {
505 phydev->state = PHY_AN;
506 phydev->link_timeout = PHY_AN_TIMEOUT;
507 } else {
508 phydev->state = PHY_FORCING;
509 phydev->link_timeout = PHY_FORCE_TIMEOUT;
510 }
511 }
512
513 /* Re-schedule a PHY state machine to check PHY status because
514 * negotiation may already be done and aneg interrupt may not be
515 * generated.
516 */
517 if (phy_interrupt_is_valid(phydev) && (phydev->state == PHY_AN)) {
518 err = phy_aneg_done(phydev);
519 if (err > 0) {
520 trigger = true;
521 err = 0;
522 }
523 }
524
525out_unlock:
526 mutex_unlock(&phydev->lock);
527
528 if (trigger)
529 phy_trigger_machine(phydev, sync);
530
531 return err;
532}
533
534/**
535 * phy_start_aneg - start auto-negotiation for this PHY device
536 * @phydev: the phy_device struct
537 *
538 * Description: Sanitizes the settings (if we're not autonegotiating
539 * them), and then calls the driver's config_aneg function.
540 * If the PHYCONTROL Layer is operating, we change the state to
541 * reflect the beginning of Auto-negotiation or forcing.
542 */
543int phy_start_aneg(struct phy_device *phydev)
544{
545 return phy_start_aneg_priv(phydev, true);
546}
547EXPORT_SYMBOL(phy_start_aneg);
548
549/**
550 * phy_start_machine - start PHY state machine tracking
551 * @phydev: the phy_device struct
552 *
553 * Description: The PHY infrastructure can run a state machine
554 * which tracks whether the PHY is starting up, negotiating,
555 * etc. This function starts the delayed workqueue which tracks
556 * the state of the PHY. If you want to maintain your own state machine,
557 * do not call this function.
558 */
559void phy_start_machine(struct phy_device *phydev)
560{
561 queue_delayed_work(system_power_efficient_wq, &phydev->state_queue, HZ);
562}
563EXPORT_SYMBOL_GPL(phy_start_machine);
564
565/**
566 * phy_trigger_machine - trigger the state machine to run
567 *
568 * @phydev: the phy_device struct
569 * @sync: indicate whether we should wait for the workqueue cancelation
570 *
571 * Description: There has been a change in state which requires that the
572 * state machine runs.
573 */
574
575void phy_trigger_machine(struct phy_device *phydev, bool sync)
576{
577 if (sync)
578 cancel_delayed_work_sync(&phydev->state_queue);
579 else
580 cancel_delayed_work(&phydev->state_queue);
581 queue_delayed_work(system_power_efficient_wq, &phydev->state_queue, 0);
582}
583
584/**
585 * phy_stop_machine - stop the PHY state machine tracking
586 * @phydev: target phy_device struct
587 *
588 * Description: Stops the state machine delayed workqueue, sets the
589 * state to UP (unless it wasn't up yet). This function must be
590 * called BEFORE phy_detach.
591 */
592void phy_stop_machine(struct phy_device *phydev)
593{
594 cancel_delayed_work_sync(&phydev->state_queue);
595
596 mutex_lock(&phydev->lock);
597 if (phydev->state > PHY_UP && phydev->state != PHY_HALTED)
598 phydev->state = PHY_UP;
599 mutex_unlock(&phydev->lock);
600}
601
602/**
603 * phy_error - enter HALTED state for this PHY device
604 * @phydev: target phy_device struct
605 *
606 * Moves the PHY to the HALTED state in response to a read
607 * or write error, and tells the controller the link is down.
608 * Must not be called from interrupt context, or while the
609 * phydev->lock is held.
610 */
611static void phy_error(struct phy_device *phydev)
612{
613 mutex_lock(&phydev->lock);
614 phydev->state = PHY_HALTED;
615 mutex_unlock(&phydev->lock);
616
617 phy_trigger_machine(phydev, false);
618}
619
620/**
621 * phy_disable_interrupts - Disable the PHY interrupts from the PHY side
622 * @phydev: target phy_device struct
623 */
624static int phy_disable_interrupts(struct phy_device *phydev)
625{
626 int err;
627
628 /* Disable PHY interrupts */
629 err = phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
630 if (err)
631 return err;
632
633 /* Clear the interrupt */
634 return phy_clear_interrupt(phydev);
635}
636
637/**
638 * phy_change - Called by the phy_interrupt to handle PHY changes
639 * @phydev: phy_device struct that interrupted
640 */
641static irqreturn_t phy_change(struct phy_device *phydev)
642{
643 if (phy_interrupt_is_valid(phydev)) {
644 if (phydev->drv->did_interrupt &&
645 !phydev->drv->did_interrupt(phydev))
646 return IRQ_NONE;
647
648 if (phydev->state == PHY_HALTED)
649 if (phy_disable_interrupts(phydev))
650 goto phy_err;
651 }
652
653 mutex_lock(&phydev->lock);
654 if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state))
655 phydev->state = PHY_CHANGELINK;
656 mutex_unlock(&phydev->lock);
657
658 /* reschedule state queue work to run as soon as possible */
659 phy_trigger_machine(phydev, true);
660
661 if (phy_interrupt_is_valid(phydev) && phy_clear_interrupt(phydev))
662 goto phy_err;
663 return IRQ_HANDLED;
664
665phy_err:
666 phy_error(phydev);
667 return IRQ_NONE;
668}
669
670/**
671 * phy_change_work - Scheduled by the phy_mac_interrupt to handle PHY changes
672 * @work: work_struct that describes the work to be done
673 */
674void phy_change_work(struct work_struct *work)
675{
676 struct phy_device *phydev =
677 container_of(work, struct phy_device, phy_queue);
678
679 phy_change(phydev);
680}
681
682/**
683 * phy_interrupt - PHY interrupt handler
684 * @irq: interrupt line
685 * @phy_dat: phy_device pointer
686 *
687 * Description: When a PHY interrupt occurs, the handler disables
688 * interrupts, and uses phy_change to handle the interrupt.
689 */
690static irqreturn_t phy_interrupt(int irq, void *phy_dat)
691{
692 struct phy_device *phydev = phy_dat;
693
694 if (PHY_HALTED == phydev->state)
695 return IRQ_NONE; /* It can't be ours. */
696
697 return phy_change(phydev);
698}
699
700/**
701 * phy_enable_interrupts - Enable the interrupts from the PHY side
702 * @phydev: target phy_device struct
703 */
704static int phy_enable_interrupts(struct phy_device *phydev)
705{
706 int err = phy_clear_interrupt(phydev);
707
708 if (err < 0)
709 return err;
710
711 return phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
712}
713
714/**
715 * phy_start_interrupts - request and enable interrupts for a PHY device
716 * @phydev: target phy_device struct
717 *
718 * Description: Request the interrupt for the given PHY.
719 * If this fails, then we set irq to PHY_POLL.
720 * Otherwise, we enable the interrupts in the PHY.
721 * This should only be called with a valid IRQ number.
722 * Returns 0 on success or < 0 on error.
723 */
724int phy_start_interrupts(struct phy_device *phydev)
725{
726 if (request_threaded_irq(phydev->irq, NULL, phy_interrupt,
727 IRQF_ONESHOT | IRQF_SHARED,
728 phydev_name(phydev), phydev) < 0) {
729 pr_warn("%s: Can't get IRQ %d (PHY)\n",
730 phydev->mdio.bus->name, phydev->irq);
731 phydev->irq = PHY_POLL;
732 return 0;
733 }
734
735 return phy_enable_interrupts(phydev);
736}
737EXPORT_SYMBOL(phy_start_interrupts);
738
739/**
740 * phy_stop_interrupts - disable interrupts from a PHY device
741 * @phydev: target phy_device struct
742 */
743int phy_stop_interrupts(struct phy_device *phydev)
744{
745 int err = phy_disable_interrupts(phydev);
746
747 if (err)
748 phy_error(phydev);
749
750 free_irq(phydev->irq, phydev);
751
752 return err;
753}
754EXPORT_SYMBOL(phy_stop_interrupts);
755
756/**
757 * phy_stop - Bring down the PHY link, and stop checking the status
758 * @phydev: target phy_device struct
759 */
760void phy_stop(struct phy_device *phydev)
761{
762 mutex_lock(&phydev->lock);
763
764 if (PHY_HALTED == phydev->state)
765 goto out_unlock;
766
767 if (phy_interrupt_is_valid(phydev))
768 phy_disable_interrupts(phydev);
769
770 phydev->state = PHY_HALTED;
771
772out_unlock:
773 mutex_unlock(&phydev->lock);
774
775 /* Cannot call flush_scheduled_work() here as desired because
776 * of rtnl_lock(), but PHY_HALTED shall guarantee phy_change()
777 * will not reenable interrupts.
778 */
779}
780EXPORT_SYMBOL(phy_stop);
781
782/**
783 * phy_start - start or restart a PHY device
784 * @phydev: target phy_device struct
785 *
786 * Description: Indicates the attached device's readiness to
787 * handle PHY-related work. Used during startup to start the
788 * PHY, and after a call to phy_stop() to resume operation.
789 * Also used to indicate the MDIO bus has cleared an error
790 * condition.
791 */
792void phy_start(struct phy_device *phydev)
793{
794 int err = 0;
795
796 mutex_lock(&phydev->lock);
797
798 switch (phydev->state) {
799 case PHY_STARTING:
800 phydev->state = PHY_PENDING;
801 break;
802 case PHY_READY:
803 phydev->state = PHY_UP;
804 break;
805 case PHY_HALTED:
806 /* if phy was suspended, bring the physical link up again */
807 __phy_resume(phydev);
808
809 /* make sure interrupts are re-enabled for the PHY */
810 if (phy_interrupt_is_valid(phydev)) {
811 err = phy_enable_interrupts(phydev);
812 if (err < 0)
813 break;
814 }
815
816 phydev->state = PHY_RESUMING;
817 break;
818 default:
819 break;
820 }
821 mutex_unlock(&phydev->lock);
822
823 phy_trigger_machine(phydev, true);
824}
825EXPORT_SYMBOL(phy_start);
826
827static void phy_link_up(struct phy_device *phydev)
828{
829 phydev->phy_link_change(phydev, true, true);
830 phy_led_trigger_change_speed(phydev);
831}
832
833static void phy_link_down(struct phy_device *phydev, bool do_carrier)
834{
835 phydev->phy_link_change(phydev, false, do_carrier);
836 phy_led_trigger_change_speed(phydev);
837}
838
839/**
840 * phy_state_machine - Handle the state machine
841 * @work: work_struct that describes the work to be done
842 */
843void phy_state_machine(struct work_struct *work)
844{
845 struct delayed_work *dwork = to_delayed_work(work);
846 struct phy_device *phydev =
847 container_of(dwork, struct phy_device, state_queue);
848 bool needs_aneg = false, do_suspend = false;
849 enum phy_state old_state;
850 int err = 0;
851 int old_link;
852
853 mutex_lock(&phydev->lock);
854
855 old_state = phydev->state;
856
857 if (phydev->drv && phydev->drv->link_change_notify)
858 phydev->drv->link_change_notify(phydev);
859
860 switch (phydev->state) {
861 case PHY_DOWN:
862 case PHY_STARTING:
863 case PHY_READY:
864 case PHY_PENDING:
865 break;
866 case PHY_UP:
867 needs_aneg = true;
868
869 phydev->link_timeout = PHY_AN_TIMEOUT;
870
871 break;
872 case PHY_AN:
873 err = phy_read_status(phydev);
874 if (err < 0)
875 break;
876
877 /* If the link is down, give up on negotiation for now */
878 if (!phydev->link) {
879 phydev->state = PHY_NOLINK;
880 phy_link_down(phydev, true);
881 break;
882 }
883
884 /* Check if negotiation is done. Break if there's an error */
885 err = phy_aneg_done(phydev);
886 if (err < 0)
887 break;
888
889 /* If AN is done, we're running */
890 if (err > 0) {
891 phydev->state = PHY_RUNNING;
892 phy_link_up(phydev);
893 } else if (0 == phydev->link_timeout--)
894 needs_aneg = true;
895 break;
896 case PHY_NOLINK:
897 if (phy_interrupt_is_valid(phydev))
898 break;
899
900 err = phy_read_status(phydev);
901 if (err)
902 break;
903
904 if (phydev->link) {
905 if (AUTONEG_ENABLE == phydev->autoneg) {
906 err = phy_aneg_done(phydev);
907 if (err < 0)
908 break;
909
910 if (!err) {
911 phydev->state = PHY_AN;
912 phydev->link_timeout = PHY_AN_TIMEOUT;
913 break;
914 }
915 }
916 phydev->state = PHY_RUNNING;
917 phy_link_up(phydev);
918 }
919 break;
920 case PHY_FORCING:
921 err = genphy_update_link(phydev);
922 if (err)
923 break;
924
925 if (phydev->link) {
926 phydev->state = PHY_RUNNING;
927 phy_link_up(phydev);
928 } else {
929 if (0 == phydev->link_timeout--)
930 needs_aneg = true;
931 phy_link_down(phydev, false);
932 }
933 break;
934 case PHY_RUNNING:
935 /* Only register a CHANGE if we are polling and link changed
936 * since latest checking.
937 */
938 if (phydev->irq == PHY_POLL) {
939 old_link = phydev->link;
940 err = phy_read_status(phydev);
941 if (err)
942 break;
943
944 if (old_link != phydev->link)
945 phydev->state = PHY_CHANGELINK;
946 }
947 /*
948 * Failsafe: check that nobody set phydev->link=0 between two
949 * poll cycles, otherwise we won't leave RUNNING state as long
950 * as link remains down.
951 */
952 if (!phydev->link && phydev->state == PHY_RUNNING) {
953 phydev->state = PHY_CHANGELINK;
954 phydev_err(phydev, "no link in PHY_RUNNING\n");
955 }
956 break;
957 case PHY_CHANGELINK:
958 err = phy_read_status(phydev);
959 if (err)
960 break;
961
962 if (phydev->link) {
963 phydev->state = PHY_RUNNING;
964 phy_link_up(phydev);
965 } else {
966 phydev->state = PHY_NOLINK;
967 phy_link_down(phydev, true);
968 }
969 break;
970 case PHY_HALTED:
971 if (phydev->link) {
972 phydev->link = 0;
973 phy_link_down(phydev, true);
974 do_suspend = true;
975 }
976 break;
977 case PHY_RESUMING:
978 if (AUTONEG_ENABLE == phydev->autoneg) {
979 err = phy_aneg_done(phydev);
980 if (err < 0)
981 break;
982
983 /* err > 0 if AN is done.
984 * Otherwise, it's 0, and we're still waiting for AN
985 */
986 if (err > 0) {
987 err = phy_read_status(phydev);
988 if (err)
989 break;
990
991 if (phydev->link) {
992 phydev->state = PHY_RUNNING;
993 phy_link_up(phydev);
994 } else {
995 phydev->state = PHY_NOLINK;
996 phy_link_down(phydev, false);
997 }
998 } else {
999 phydev->state = PHY_AN;
1000 phydev->link_timeout = PHY_AN_TIMEOUT;
1001 }
1002 } else {
1003 err = phy_read_status(phydev);
1004 if (err)
1005 break;
1006
1007 if (phydev->link) {
1008 phydev->state = PHY_RUNNING;
1009 phy_link_up(phydev);
1010 } else {
1011 phydev->state = PHY_NOLINK;
1012 phy_link_down(phydev, false);
1013 }
1014 }
1015 break;
1016 }
1017
1018 mutex_unlock(&phydev->lock);
1019
1020 if (needs_aneg)
1021 err = phy_start_aneg_priv(phydev, false);
1022 else if (do_suspend)
1023 phy_suspend(phydev);
1024
1025 if (err < 0)
1026 phy_error(phydev);
1027
1028 if (old_state != phydev->state)
1029 phydev_dbg(phydev, "PHY state change %s -> %s\n",
1030 phy_state_to_str(old_state),
1031 phy_state_to_str(phydev->state));
1032
1033 /* Only re-schedule a PHY state machine change if we are polling the
1034 * PHY, if PHY_IGNORE_INTERRUPT is set, then we will be moving
1035 * between states from phy_mac_interrupt()
1036 */
1037 if (phydev->irq == PHY_POLL)
1038 queue_delayed_work(system_power_efficient_wq, &phydev->state_queue,
1039 PHY_STATE_TIME * HZ);
1040}
1041
1042/**
1043 * phy_mac_interrupt - MAC says the link has changed
1044 * @phydev: phy_device struct with changed link
1045 *
1046 * The MAC layer is able to indicate there has been a change in the PHY link
1047 * status. Trigger the state machine and work a work queue.
1048 */
1049void phy_mac_interrupt(struct phy_device *phydev)
1050{
1051 /* Trigger a state machine change */
1052 queue_work(system_power_efficient_wq, &phydev->phy_queue);
1053}
1054EXPORT_SYMBOL(phy_mac_interrupt);
1055
1056/**
1057 * phy_init_eee - init and check the EEE feature
1058 * @phydev: target phy_device struct
1059 * @clk_stop_enable: PHY may stop the clock during LPI
1060 *
1061 * Description: it checks if the Energy-Efficient Ethernet (EEE)
1062 * is supported by looking at the MMD registers 3.20 and 7.60/61
1063 * and it programs the MMD register 3.0 setting the "Clock stop enable"
1064 * bit if required.
1065 */
1066int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
1067{
1068 if (!phydev->drv)
1069 return -EIO;
1070
1071 /* According to 802.3az,the EEE is supported only in full duplex-mode.
1072 */
1073 if (phydev->duplex == DUPLEX_FULL) {
1074 int eee_lp, eee_cap, eee_adv;
1075 u32 lp, cap, adv;
1076 int status;
1077
1078 /* Read phy status to properly get the right settings */
1079 status = phy_read_status(phydev);
1080 if (status)
1081 return status;
1082
1083 /* First check if the EEE ability is supported */
1084 eee_cap = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE);
1085 if (eee_cap <= 0)
1086 goto eee_exit_err;
1087
1088 cap = mmd_eee_cap_to_ethtool_sup_t(eee_cap);
1089 if (!cap)
1090 goto eee_exit_err;
1091
1092 /* Check which link settings negotiated and verify it in
1093 * the EEE advertising registers.
1094 */
1095 eee_lp = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_LPABLE);
1096 if (eee_lp <= 0)
1097 goto eee_exit_err;
1098
1099 eee_adv = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV);
1100 if (eee_adv <= 0)
1101 goto eee_exit_err;
1102
1103 adv = mmd_eee_adv_to_ethtool_adv_t(eee_adv);
1104 lp = mmd_eee_adv_to_ethtool_adv_t(eee_lp);
1105 if (!phy_check_valid(phydev->speed, phydev->duplex, lp & adv))
1106 goto eee_exit_err;
1107
1108 if (clk_stop_enable) {
1109 /* Configure the PHY to stop receiving xMII
1110 * clock while it is signaling LPI.
1111 */
1112 int val = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1);
1113 if (val < 0)
1114 return val;
1115
1116 val |= MDIO_PCS_CTRL1_CLKSTOP_EN;
1117 phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, val);
1118 }
1119
1120 return 0; /* EEE supported */
1121 }
1122eee_exit_err:
1123 return -EPROTONOSUPPORT;
1124}
1125EXPORT_SYMBOL(phy_init_eee);
1126
1127/**
1128 * phy_get_eee_err - report the EEE wake error count
1129 * @phydev: target phy_device struct
1130 *
1131 * Description: it is to report the number of time where the PHY
1132 * failed to complete its normal wake sequence.
1133 */
1134int phy_get_eee_err(struct phy_device *phydev)
1135{
1136 if (!phydev->drv)
1137 return -EIO;
1138
1139 return phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_WK_ERR);
1140}
1141EXPORT_SYMBOL(phy_get_eee_err);
1142
1143/**
1144 * phy_ethtool_get_eee - get EEE supported and status
1145 * @phydev: target phy_device struct
1146 * @data: ethtool_eee data
1147 *
1148 * Description: it reportes the Supported/Advertisement/LP Advertisement
1149 * capabilities.
1150 */
1151int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data)
1152{
1153 int val;
1154
1155 if (!phydev->drv)
1156 return -EIO;
1157
1158 /* Get Supported EEE */
1159 val = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE);
1160 if (val < 0)
1161 return val;
1162 data->supported = mmd_eee_cap_to_ethtool_sup_t(val);
1163
1164 /* Get advertisement EEE */
1165 val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV);
1166 if (val < 0)
1167 return val;
1168 data->advertised = mmd_eee_adv_to_ethtool_adv_t(val);
1169
1170 /* Get LP advertisement EEE */
1171 val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_LPABLE);
1172 if (val < 0)
1173 return val;
1174 data->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(val);
1175
1176 return 0;
1177}
1178EXPORT_SYMBOL(phy_ethtool_get_eee);
1179
1180/**
1181 * phy_ethtool_set_eee - set EEE supported and status
1182 * @phydev: target phy_device struct
1183 * @data: ethtool_eee data
1184 *
1185 * Description: it is to program the Advertisement EEE register.
1186 */
1187int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
1188{
1189 int cap, old_adv, adv, ret;
1190
1191 if (!phydev->drv)
1192 return -EIO;
1193
1194 /* Get Supported EEE */
1195 cap = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE);
1196 if (cap < 0)
1197 return cap;
1198
1199 old_adv = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV);
1200 if (old_adv < 0)
1201 return old_adv;
1202
1203 adv = ethtool_adv_to_mmd_eee_adv_t(data->advertised) & cap;
1204
1205 /* Mask prohibited EEE modes */
1206 adv &= ~phydev->eee_broken_modes;
1207
1208 if (old_adv != adv) {
1209 ret = phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, adv);
1210 if (ret < 0)
1211 return ret;
1212
1213 /* Restart autonegotiation so the new modes get sent to the
1214 * link partner.
1215 */
1216 ret = phy_restart_aneg(phydev);
1217 if (ret < 0)
1218 return ret;
1219 }
1220
1221 return 0;
1222}
1223EXPORT_SYMBOL(phy_ethtool_set_eee);
1224
1225int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
1226{
1227 if (phydev->drv && phydev->drv->set_wol)
1228 return phydev->drv->set_wol(phydev, wol);
1229
1230 return -EOPNOTSUPP;
1231}
1232EXPORT_SYMBOL(phy_ethtool_set_wol);
1233
1234void phy_ethtool_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
1235{
1236 if (phydev->drv && phydev->drv->get_wol)
1237 phydev->drv->get_wol(phydev, wol);
1238}
1239EXPORT_SYMBOL(phy_ethtool_get_wol);
1240
1241int phy_ethtool_get_link_ksettings(struct net_device *ndev,
1242 struct ethtool_link_ksettings *cmd)
1243{
1244 struct phy_device *phydev = ndev->phydev;
1245
1246 if (!phydev)
1247 return -ENODEV;
1248
1249 phy_ethtool_ksettings_get(phydev, cmd);
1250
1251 return 0;
1252}
1253EXPORT_SYMBOL(phy_ethtool_get_link_ksettings);
1254
1255int phy_ethtool_set_link_ksettings(struct net_device *ndev,
1256 const struct ethtool_link_ksettings *cmd)
1257{
1258 struct phy_device *phydev = ndev->phydev;
1259
1260 if (!phydev)
1261 return -ENODEV;
1262
1263 return phy_ethtool_ksettings_set(phydev, cmd);
1264}
1265EXPORT_SYMBOL(phy_ethtool_set_link_ksettings);
1266
1267int phy_ethtool_nway_reset(struct net_device *ndev)
1268{
1269 struct phy_device *phydev = ndev->phydev;
1270
1271 if (!phydev)
1272 return -ENODEV;
1273
1274 if (!phydev->drv)
1275 return -EIO;
1276
1277 return phy_restart_aneg(phydev);
1278}
1279EXPORT_SYMBOL(phy_ethtool_nway_reset);