Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * byt_cr_dpcm_rt5640.c - ASoc Machine driver for Intel Byt CR platform
4 *
5 * Copyright (C) 2014 Intel Corp
6 * Author: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
7 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
8 *
9 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
10 */
11
12#include <linux/i2c.h>
13#include <linux/init.h>
14#include <linux/module.h>
15#include <linux/moduleparam.h>
16#include <linux/platform_device.h>
17#include <linux/acpi.h>
18#include <linux/clk.h>
19#include <linux/device.h>
20#include <linux/device/bus.h>
21#include <linux/dmi.h>
22#include <linux/gpio/consumer.h>
23#include <linux/gpio/machine.h>
24#include <linux/input.h>
25#include <linux/slab.h>
26#include <sound/pcm.h>
27#include <sound/pcm_params.h>
28#include <sound/soc.h>
29#include <sound/jack.h>
30#include <sound/soc-acpi.h>
31#include <dt-bindings/sound/rt5640.h>
32#include "../../codecs/rt5640.h"
33#include "../atom/sst-atom-controls.h"
34#include "../common/soc-intel-quirks.h"
35
36#define BYT_RT5640_FALLBACK_CODEC_DEV_NAME "i2c-rt5640"
37
38enum {
39 BYT_RT5640_DMIC1_MAP,
40 BYT_RT5640_DMIC2_MAP,
41 BYT_RT5640_IN1_MAP,
42 BYT_RT5640_IN3_MAP,
43 BYT_RT5640_NO_INTERNAL_MIC_MAP,
44};
45
46#define RT5640_JD_SRC_EXT_GPIO 0x0f
47
48enum {
49 BYT_RT5640_JD_SRC_GPIO1 = (RT5640_JD_SRC_GPIO1 << 4),
50 BYT_RT5640_JD_SRC_JD1_IN4P = (RT5640_JD_SRC_JD1_IN4P << 4),
51 BYT_RT5640_JD_SRC_JD2_IN4N = (RT5640_JD_SRC_JD2_IN4N << 4),
52 BYT_RT5640_JD_SRC_GPIO2 = (RT5640_JD_SRC_GPIO2 << 4),
53 BYT_RT5640_JD_SRC_GPIO3 = (RT5640_JD_SRC_GPIO3 << 4),
54 BYT_RT5640_JD_SRC_GPIO4 = (RT5640_JD_SRC_GPIO4 << 4),
55 BYT_RT5640_JD_SRC_EXT_GPIO = (RT5640_JD_SRC_EXT_GPIO << 4)
56};
57
58enum {
59 BYT_RT5640_OVCD_TH_600UA = (6 << 8),
60 BYT_RT5640_OVCD_TH_1500UA = (15 << 8),
61 BYT_RT5640_OVCD_TH_2000UA = (20 << 8),
62};
63
64enum {
65 BYT_RT5640_OVCD_SF_0P5 = (RT5640_OVCD_SF_0P5 << 13),
66 BYT_RT5640_OVCD_SF_0P75 = (RT5640_OVCD_SF_0P75 << 13),
67 BYT_RT5640_OVCD_SF_1P0 = (RT5640_OVCD_SF_1P0 << 13),
68 BYT_RT5640_OVCD_SF_1P5 = (RT5640_OVCD_SF_1P5 << 13),
69};
70
71#define BYT_RT5640_MAP(quirk) ((quirk) & GENMASK(3, 0))
72#define BYT_RT5640_JDSRC(quirk) (((quirk) & GENMASK(7, 4)) >> 4)
73#define BYT_RT5640_OVCD_TH(quirk) (((quirk) & GENMASK(12, 8)) >> 8)
74#define BYT_RT5640_OVCD_SF(quirk) (((quirk) & GENMASK(14, 13)) >> 13)
75#define BYT_RT5640_JD_NOT_INV BIT(16)
76#define BYT_RT5640_MONO_SPEAKER BIT(17)
77#define BYT_RT5640_DIFF_MIC BIT(18) /* default is single-ended */
78#define BYT_RT5640_SSP2_AIF2 BIT(19) /* default is using AIF1 */
79#define BYT_RT5640_SSP0_AIF1 BIT(20)
80#define BYT_RT5640_SSP0_AIF2 BIT(21)
81#define BYT_RT5640_MCLK_EN BIT(22)
82#define BYT_RT5640_MCLK_25MHZ BIT(23)
83#define BYT_RT5640_NO_SPEAKERS BIT(24)
84#define BYT_RT5640_LINEOUT BIT(25)
85#define BYT_RT5640_LINEOUT_AS_HP2 BIT(26)
86#define BYT_RT5640_HSMIC2_ON_IN1 BIT(27)
87#define BYT_RT5640_JD_HP_ELITEP_1000G2 BIT(28)
88#define BYT_RT5640_USE_AMCR0F28 BIT(29)
89#define BYT_RT5640_SWAPPED_SPEAKERS BIT(30)
90
91#define BYTCR_INPUT_DEFAULTS \
92 (BYT_RT5640_IN3_MAP | \
93 BYT_RT5640_JD_SRC_JD1_IN4P | \
94 BYT_RT5640_OVCD_TH_2000UA | \
95 BYT_RT5640_OVCD_SF_0P75 | \
96 BYT_RT5640_DIFF_MIC)
97
98/* in-diff or dmic-pin + jdsrc + ovcd-th + -sf + jd-inv + terminating entry */
99#define MAX_NO_PROPS 6
100
101struct byt_rt5640_private {
102 struct snd_soc_jack jack;
103 struct snd_soc_jack jack2;
104 struct rt5640_set_jack_data jack_data;
105 struct gpio_desc *hsmic_detect;
106 struct clk *mclk;
107 struct device *codec_dev;
108};
109static bool is_bytcr;
110
111static unsigned long byt_rt5640_quirk = BYT_RT5640_MCLK_EN;
112static int quirk_override = -1;
113module_param_named(quirk, quirk_override, int, 0444);
114MODULE_PARM_DESC(quirk, "Board-specific quirk override");
115
116static void log_quirks(struct device *dev)
117{
118 int map;
119 bool has_mclk = false;
120 bool has_ssp0 = false;
121 bool has_ssp0_aif1 = false;
122 bool has_ssp0_aif2 = false;
123 bool has_ssp2_aif2 = false;
124
125 map = BYT_RT5640_MAP(byt_rt5640_quirk);
126 switch (map) {
127 case BYT_RT5640_DMIC1_MAP:
128 dev_info(dev, "quirk DMIC1_MAP enabled\n");
129 break;
130 case BYT_RT5640_DMIC2_MAP:
131 dev_info(dev, "quirk DMIC2_MAP enabled\n");
132 break;
133 case BYT_RT5640_IN1_MAP:
134 dev_info(dev, "quirk IN1_MAP enabled\n");
135 break;
136 case BYT_RT5640_IN3_MAP:
137 dev_info(dev, "quirk IN3_MAP enabled\n");
138 break;
139 case BYT_RT5640_NO_INTERNAL_MIC_MAP:
140 dev_info(dev, "quirk NO_INTERNAL_MIC_MAP enabled\n");
141 break;
142 default:
143 dev_err(dev, "quirk map 0x%x is not supported, microphone input will not work\n", map);
144 break;
145 }
146 if (byt_rt5640_quirk & BYT_RT5640_HSMIC2_ON_IN1)
147 dev_info(dev, "quirk HSMIC2_ON_IN1 enabled\n");
148 if (BYT_RT5640_JDSRC(byt_rt5640_quirk)) {
149 dev_info(dev, "quirk realtek,jack-detect-source %ld\n",
150 BYT_RT5640_JDSRC(byt_rt5640_quirk));
151 dev_info(dev, "quirk realtek,over-current-threshold-microamp %ld\n",
152 BYT_RT5640_OVCD_TH(byt_rt5640_quirk) * 100);
153 dev_info(dev, "quirk realtek,over-current-scale-factor %ld\n",
154 BYT_RT5640_OVCD_SF(byt_rt5640_quirk));
155 }
156 if (byt_rt5640_quirk & BYT_RT5640_JD_NOT_INV)
157 dev_info(dev, "quirk JD_NOT_INV enabled\n");
158 if (byt_rt5640_quirk & BYT_RT5640_JD_HP_ELITEP_1000G2)
159 dev_info(dev, "quirk JD_HP_ELITEPAD_1000G2 enabled\n");
160 if (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER)
161 dev_info(dev, "quirk MONO_SPEAKER enabled\n");
162 if (byt_rt5640_quirk & BYT_RT5640_NO_SPEAKERS)
163 dev_info(dev, "quirk NO_SPEAKERS enabled\n");
164 if (byt_rt5640_quirk & BYT_RT5640_SWAPPED_SPEAKERS)
165 dev_info(dev, "quirk SWAPPED_SPEAKERS enabled\n");
166 if (byt_rt5640_quirk & BYT_RT5640_LINEOUT)
167 dev_info(dev, "quirk LINEOUT enabled\n");
168 if (byt_rt5640_quirk & BYT_RT5640_LINEOUT_AS_HP2)
169 dev_info(dev, "quirk LINEOUT_AS_HP2 enabled\n");
170 if (byt_rt5640_quirk & BYT_RT5640_DIFF_MIC)
171 dev_info(dev, "quirk DIFF_MIC enabled\n");
172 if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) {
173 dev_info(dev, "quirk SSP0_AIF1 enabled\n");
174 has_ssp0 = true;
175 has_ssp0_aif1 = true;
176 }
177 if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF2) {
178 dev_info(dev, "quirk SSP0_AIF2 enabled\n");
179 has_ssp0 = true;
180 has_ssp0_aif2 = true;
181 }
182 if (byt_rt5640_quirk & BYT_RT5640_SSP2_AIF2) {
183 dev_info(dev, "quirk SSP2_AIF2 enabled\n");
184 has_ssp2_aif2 = true;
185 }
186 if (is_bytcr && !has_ssp0)
187 dev_err(dev, "Invalid routing, bytcr detected but no SSP0-based quirk, audio cannot work with SSP2 on bytcr\n");
188 if (has_ssp0_aif1 && has_ssp0_aif2)
189 dev_err(dev, "Invalid routing, SSP0 cannot be connected to both AIF1 and AIF2\n");
190 if (has_ssp0 && has_ssp2_aif2)
191 dev_err(dev, "Invalid routing, cannot have both SSP0 and SSP2 connected to codec\n");
192
193 if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) {
194 dev_info(dev, "quirk MCLK_EN enabled\n");
195 has_mclk = true;
196 }
197 if (byt_rt5640_quirk & BYT_RT5640_MCLK_25MHZ) {
198 if (has_mclk)
199 dev_info(dev, "quirk MCLK_25MHZ enabled\n");
200 else
201 dev_err(dev, "quirk MCLK_25MHZ enabled but quirk MCLK not selected, will be ignored\n");
202 }
203}
204
205static int byt_rt5640_prepare_and_enable_pll1(struct snd_soc_dai *codec_dai,
206 int rate)
207{
208 int ret;
209
210 /* Configure the PLL before selecting it */
211 if (!(byt_rt5640_quirk & BYT_RT5640_MCLK_EN)) {
212 /* use bitclock as PLL input */
213 if ((byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) ||
214 (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF2)) {
215 /* 2x16 bit slots on SSP0 */
216 ret = snd_soc_dai_set_pll(codec_dai, 0,
217 RT5640_PLL1_S_BCLK1,
218 rate * 32, rate * 512);
219 } else {
220 /* 2x15 bit slots on SSP2 */
221 ret = snd_soc_dai_set_pll(codec_dai, 0,
222 RT5640_PLL1_S_BCLK1,
223 rate * 50, rate * 512);
224 }
225 } else {
226 if (byt_rt5640_quirk & BYT_RT5640_MCLK_25MHZ) {
227 ret = snd_soc_dai_set_pll(codec_dai, 0,
228 RT5640_PLL1_S_MCLK,
229 25000000, rate * 512);
230 } else {
231 ret = snd_soc_dai_set_pll(codec_dai, 0,
232 RT5640_PLL1_S_MCLK,
233 19200000, rate * 512);
234 }
235 }
236
237 if (ret < 0) {
238 dev_err(codec_dai->component->dev, "can't set pll: %d\n", ret);
239 return ret;
240 }
241
242 ret = snd_soc_dai_set_sysclk(codec_dai, RT5640_SCLK_S_PLL1,
243 rate * 512, SND_SOC_CLOCK_IN);
244 if (ret < 0) {
245 dev_err(codec_dai->component->dev, "can't set clock %d\n", ret);
246 return ret;
247 }
248
249 return 0;
250}
251
252#define BYT_CODEC_DAI1 "rt5640-aif1"
253#define BYT_CODEC_DAI2 "rt5640-aif2"
254
255static struct snd_soc_dai *byt_rt5640_get_codec_dai(struct snd_soc_dapm_context *dapm)
256{
257 struct snd_soc_card *card = dapm->card;
258 struct snd_soc_dai *codec_dai;
259
260 codec_dai = snd_soc_card_get_codec_dai(card, BYT_CODEC_DAI1);
261 if (!codec_dai)
262 codec_dai = snd_soc_card_get_codec_dai(card, BYT_CODEC_DAI2);
263 if (!codec_dai)
264 dev_err(card->dev, "Error codec dai not found\n");
265
266 return codec_dai;
267}
268
269static int platform_clock_control(struct snd_soc_dapm_widget *w,
270 struct snd_kcontrol *k, int event)
271{
272 struct snd_soc_dapm_context *dapm = w->dapm;
273 struct snd_soc_card *card = dapm->card;
274 struct snd_soc_dai *codec_dai;
275 struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card);
276 int ret;
277
278 codec_dai = byt_rt5640_get_codec_dai(dapm);
279 if (!codec_dai)
280 return -EIO;
281
282 if (SND_SOC_DAPM_EVENT_ON(event)) {
283 ret = clk_prepare_enable(priv->mclk);
284 if (ret < 0) {
285 dev_err(card->dev, "could not configure MCLK state\n");
286 return ret;
287 }
288 ret = byt_rt5640_prepare_and_enable_pll1(codec_dai, 48000);
289 } else {
290 /*
291 * Set codec clock source to internal clock before
292 * turning off the platform clock. Codec needs clock
293 * for Jack detection and button press
294 */
295 ret = snd_soc_dai_set_sysclk(codec_dai, RT5640_SCLK_S_RCCLK,
296 48000 * 512,
297 SND_SOC_CLOCK_IN);
298 if (!ret)
299 clk_disable_unprepare(priv->mclk);
300 }
301
302 if (ret < 0) {
303 dev_err(card->dev, "can't set codec sysclk: %d\n", ret);
304 return ret;
305 }
306
307 return 0;
308}
309
310static int byt_rt5640_event_lineout(struct snd_soc_dapm_widget *w,
311 struct snd_kcontrol *k, int event)
312{
313 unsigned int gpio_ctrl3_val = RT5640_GP1_PF_OUT;
314 struct snd_soc_dai *codec_dai;
315
316 if (!(byt_rt5640_quirk & BYT_RT5640_LINEOUT_AS_HP2))
317 return 0;
318
319 /*
320 * On devices which use line-out as a second headphones output,
321 * the codec's GPIO1 pin is used to enable an external HP-amp.
322 */
323
324 codec_dai = byt_rt5640_get_codec_dai(w->dapm);
325 if (!codec_dai)
326 return -EIO;
327
328 if (SND_SOC_DAPM_EVENT_ON(event))
329 gpio_ctrl3_val |= RT5640_GP1_OUT_HI;
330
331 snd_soc_component_update_bits(codec_dai->component, RT5640_GPIO_CTRL3,
332 RT5640_GP1_PF_MASK | RT5640_GP1_OUT_MASK, gpio_ctrl3_val);
333
334 return 0;
335}
336
337static const struct snd_soc_dapm_widget byt_rt5640_widgets[] = {
338 SND_SOC_DAPM_HP("Headphone", NULL),
339 SND_SOC_DAPM_MIC("Headset Mic", NULL),
340 SND_SOC_DAPM_MIC("Headset Mic 2", NULL),
341 SND_SOC_DAPM_MIC("Internal Mic", NULL),
342 SND_SOC_DAPM_SPK("Speaker", NULL),
343 SND_SOC_DAPM_LINE("Line Out", byt_rt5640_event_lineout),
344 SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0,
345 platform_clock_control, SND_SOC_DAPM_PRE_PMU |
346 SND_SOC_DAPM_POST_PMD),
347};
348
349static const struct snd_soc_dapm_route byt_rt5640_audio_map[] = {
350 {"Headphone", NULL, "Platform Clock"},
351 {"Headset Mic", NULL, "Platform Clock"},
352 {"Headset Mic", NULL, "MICBIAS1"},
353 {"IN2P", NULL, "Headset Mic"},
354 {"Headphone", NULL, "HPOL"},
355 {"Headphone", NULL, "HPOR"},
356};
357
358static const struct snd_soc_dapm_route byt_rt5640_intmic_dmic1_map[] = {
359 {"Internal Mic", NULL, "Platform Clock"},
360 {"DMIC1", NULL, "Internal Mic"},
361};
362
363static const struct snd_soc_dapm_route byt_rt5640_intmic_dmic2_map[] = {
364 {"Internal Mic", NULL, "Platform Clock"},
365 {"DMIC2", NULL, "Internal Mic"},
366};
367
368static const struct snd_soc_dapm_route byt_rt5640_intmic_in1_map[] = {
369 {"Internal Mic", NULL, "Platform Clock"},
370 {"Internal Mic", NULL, "MICBIAS1"},
371 {"IN1P", NULL, "Internal Mic"},
372};
373
374static const struct snd_soc_dapm_route byt_rt5640_intmic_in3_map[] = {
375 {"Internal Mic", NULL, "Platform Clock"},
376 {"Internal Mic", NULL, "MICBIAS1"},
377 {"IN3P", NULL, "Internal Mic"},
378};
379
380static const struct snd_soc_dapm_route byt_rt5640_hsmic2_in1_map[] = {
381 {"Headset Mic 2", NULL, "Platform Clock"},
382 {"Headset Mic 2", NULL, "MICBIAS1"},
383 {"IN1P", NULL, "Headset Mic 2"},
384};
385
386static const struct snd_soc_dapm_route byt_rt5640_ssp2_aif1_map[] = {
387 {"ssp2 Tx", NULL, "codec_out0"},
388 {"ssp2 Tx", NULL, "codec_out1"},
389 {"codec_in0", NULL, "ssp2 Rx"},
390 {"codec_in1", NULL, "ssp2 Rx"},
391
392 {"AIF1 Playback", NULL, "ssp2 Tx"},
393 {"ssp2 Rx", NULL, "AIF1 Capture"},
394};
395
396static const struct snd_soc_dapm_route byt_rt5640_ssp2_aif2_map[] = {
397 {"ssp2 Tx", NULL, "codec_out0"},
398 {"ssp2 Tx", NULL, "codec_out1"},
399 {"codec_in0", NULL, "ssp2 Rx"},
400 {"codec_in1", NULL, "ssp2 Rx"},
401
402 {"AIF2 Playback", NULL, "ssp2 Tx"},
403 {"ssp2 Rx", NULL, "AIF2 Capture"},
404};
405
406static const struct snd_soc_dapm_route byt_rt5640_ssp0_aif1_map[] = {
407 {"ssp0 Tx", NULL, "modem_out"},
408 {"modem_in", NULL, "ssp0 Rx"},
409
410 {"AIF1 Playback", NULL, "ssp0 Tx"},
411 {"ssp0 Rx", NULL, "AIF1 Capture"},
412};
413
414static const struct snd_soc_dapm_route byt_rt5640_ssp0_aif2_map[] = {
415 {"ssp0 Tx", NULL, "modem_out"},
416 {"modem_in", NULL, "ssp0 Rx"},
417
418 {"AIF2 Playback", NULL, "ssp0 Tx"},
419 {"ssp0 Rx", NULL, "AIF2 Capture"},
420};
421
422static const struct snd_soc_dapm_route byt_rt5640_stereo_spk_map[] = {
423 {"Speaker", NULL, "Platform Clock"},
424 {"Speaker", NULL, "SPOLP"},
425 {"Speaker", NULL, "SPOLN"},
426 {"Speaker", NULL, "SPORP"},
427 {"Speaker", NULL, "SPORN"},
428};
429
430static const struct snd_soc_dapm_route byt_rt5640_mono_spk_map[] = {
431 {"Speaker", NULL, "Platform Clock"},
432 {"Speaker", NULL, "SPOLP"},
433 {"Speaker", NULL, "SPOLN"},
434};
435
436static const struct snd_soc_dapm_route byt_rt5640_lineout_map[] = {
437 {"Line Out", NULL, "Platform Clock"},
438 {"Line Out", NULL, "LOUTR"},
439 {"Line Out", NULL, "LOUTL"},
440};
441
442static const struct snd_kcontrol_new byt_rt5640_controls[] = {
443 SOC_DAPM_PIN_SWITCH("Headphone"),
444 SOC_DAPM_PIN_SWITCH("Headset Mic"),
445 SOC_DAPM_PIN_SWITCH("Headset Mic 2"),
446 SOC_DAPM_PIN_SWITCH("Internal Mic"),
447 SOC_DAPM_PIN_SWITCH("Speaker"),
448 SOC_DAPM_PIN_SWITCH("Line Out"),
449};
450
451static struct snd_soc_jack_pin rt5640_pins[] = {
452 {
453 .pin = "Headphone",
454 .mask = SND_JACK_HEADPHONE,
455 },
456 {
457 .pin = "Headset Mic",
458 .mask = SND_JACK_MICROPHONE,
459 },
460};
461
462static struct snd_soc_jack_pin rt5640_pins2[] = {
463 {
464 /* The 2nd headset jack uses lineout with an external HP-amp */
465 .pin = "Line Out",
466 .mask = SND_JACK_HEADPHONE,
467 },
468 {
469 .pin = "Headset Mic 2",
470 .mask = SND_JACK_MICROPHONE,
471 },
472};
473
474static struct snd_soc_jack_gpio rt5640_jack_gpio = {
475 .name = "hp-detect",
476 .report = SND_JACK_HEADSET,
477 .invert = true,
478 .debounce_time = 200,
479};
480
481static struct snd_soc_jack_gpio rt5640_jack2_gpio = {
482 .name = "hp2-detect",
483 .report = SND_JACK_HEADSET,
484 .invert = true,
485 .debounce_time = 200,
486};
487
488static const struct acpi_gpio_params acpi_gpio0 = { 0, 0, false };
489static const struct acpi_gpio_params acpi_gpio1 = { 1, 0, false };
490static const struct acpi_gpio_params acpi_gpio2 = { 2, 0, false };
491
492static const struct acpi_gpio_mapping byt_rt5640_hp_elitepad_1000g2_gpios[] = {
493 { "hp-detect-gpios", &acpi_gpio0, 1, },
494 { "headset-mic-detect-gpios", &acpi_gpio1, 1, },
495 { "hp2-detect-gpios", &acpi_gpio2, 1, },
496 { },
497};
498
499static int byt_rt5640_hp_elitepad_1000g2_jack1_check(void *data)
500{
501 struct byt_rt5640_private *priv = data;
502 int jack_status, mic_status;
503
504 jack_status = gpiod_get_value_cansleep(rt5640_jack_gpio.desc);
505 if (jack_status)
506 return 0;
507
508 mic_status = gpiod_get_value_cansleep(priv->hsmic_detect);
509 if (mic_status)
510 return SND_JACK_HEADPHONE;
511 else
512 return SND_JACK_HEADSET;
513}
514
515static int byt_rt5640_hp_elitepad_1000g2_jack2_check(void *data)
516{
517 struct snd_soc_component *component = data;
518 int jack_status, report;
519
520 jack_status = gpiod_get_value_cansleep(rt5640_jack2_gpio.desc);
521 if (jack_status)
522 return 0;
523
524 rt5640_enable_micbias1_for_ovcd(component);
525 report = rt5640_detect_headset(component, rt5640_jack2_gpio.desc);
526 rt5640_disable_micbias1_for_ovcd(component);
527
528 return report;
529}
530
531static int byt_rt5640_aif1_hw_params(struct snd_pcm_substream *substream,
532 struct snd_pcm_hw_params *params)
533{
534 struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream);
535 struct snd_soc_dai *dai = snd_soc_rtd_to_codec(rtd, 0);
536
537 return byt_rt5640_prepare_and_enable_pll1(dai, params_rate(params));
538}
539
540/* Please keep this list alphabetically sorted */
541static const struct dmi_system_id byt_rt5640_quirk_table[] = {
542 { /* Acer Iconia One 7 B1-750 */
543 .matches = {
544 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Insyde"),
545 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "VESPA2"),
546 },
547 .driver_data = (void *)(BYT_RT5640_DMIC1_MAP |
548 BYT_RT5640_JD_SRC_JD1_IN4P |
549 BYT_RT5640_OVCD_TH_1500UA |
550 BYT_RT5640_OVCD_SF_0P75 |
551 BYT_RT5640_SSP0_AIF1 |
552 BYT_RT5640_MCLK_EN),
553 },
554 { /* Acer Iconia Tab 8 W1-810 */
555 .matches = {
556 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Acer"),
557 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Iconia W1-810"),
558 },
559 .driver_data = (void *)(BYT_RT5640_DMIC1_MAP |
560 BYT_RT5640_JD_SRC_JD1_IN4P |
561 BYT_RT5640_OVCD_TH_1500UA |
562 BYT_RT5640_OVCD_SF_0P75 |
563 BYT_RT5640_SSP0_AIF1 |
564 BYT_RT5640_MCLK_EN),
565 },
566 { /* Acer One 10 S1002 */
567 .matches = {
568 DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
569 DMI_MATCH(DMI_PRODUCT_NAME, "One S1002"),
570 },
571 .driver_data = (void *)(BYT_RT5640_IN1_MAP |
572 BYT_RT5640_JD_SRC_JD2_IN4N |
573 BYT_RT5640_OVCD_TH_2000UA |
574 BYT_RT5640_OVCD_SF_0P75 |
575 BYT_RT5640_DIFF_MIC |
576 BYT_RT5640_SSP0_AIF2 |
577 BYT_RT5640_MCLK_EN),
578 },
579 {
580 .matches = {
581 DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
582 DMI_MATCH(DMI_PRODUCT_NAME, "Aspire SW5-012"),
583 },
584 .driver_data = (void *)(BYT_RT5640_DMIC1_MAP |
585 BYT_RT5640_JD_SRC_JD2_IN4N |
586 BYT_RT5640_OVCD_TH_2000UA |
587 BYT_RT5640_OVCD_SF_0P75 |
588 BYT_RT5640_SSP0_AIF1 |
589 BYT_RT5640_MCLK_EN),
590 },
591 {
592 /* Advantech MICA-071 */
593 .matches = {
594 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Advantech"),
595 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "MICA-071"),
596 },
597 /* OVCD Th = 1500uA to reliable detect head-phones vs -set */
598 .driver_data = (void *)(BYT_RT5640_IN3_MAP |
599 BYT_RT5640_JD_SRC_JD2_IN4N |
600 BYT_RT5640_OVCD_TH_1500UA |
601 BYT_RT5640_OVCD_SF_0P75 |
602 BYT_RT5640_MONO_SPEAKER |
603 BYT_RT5640_DIFF_MIC |
604 BYT_RT5640_MCLK_EN),
605 },
606 {
607 .matches = {
608 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ARCHOS"),
609 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "ARCHOS 80 Cesium"),
610 },
611 .driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
612 BYT_RT5640_MONO_SPEAKER |
613 BYT_RT5640_SSP0_AIF1 |
614 BYT_RT5640_MCLK_EN),
615 },
616 {
617 .matches = {
618 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ARCHOS"),
619 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "ARCHOS 101 CESIUM"),
620 },
621 .driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
622 BYT_RT5640_JD_NOT_INV |
623 BYT_RT5640_DIFF_MIC |
624 BYT_RT5640_SSP0_AIF1 |
625 BYT_RT5640_MCLK_EN),
626 },
627 {
628 .matches = {
629 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ARCHOS"),
630 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "ARCHOS 140 CESIUM"),
631 },
632 .driver_data = (void *)(BYT_RT5640_IN1_MAP |
633 BYT_RT5640_JD_SRC_JD2_IN4N |
634 BYT_RT5640_OVCD_TH_2000UA |
635 BYT_RT5640_OVCD_SF_0P75 |
636 BYT_RT5640_SSP0_AIF1 |
637 BYT_RT5640_MCLK_EN),
638 },
639 {
640 .matches = {
641 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
642 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "ME176C"),
643 },
644 .driver_data = (void *)(BYT_RT5640_IN1_MAP |
645 BYT_RT5640_JD_SRC_JD2_IN4N |
646 BYT_RT5640_OVCD_TH_2000UA |
647 BYT_RT5640_OVCD_SF_0P75 |
648 BYT_RT5640_SSP0_AIF1 |
649 BYT_RT5640_MCLK_EN |
650 BYT_RT5640_USE_AMCR0F28),
651 },
652 {
653 /* Asus T100TAF, unlike other T100TA* models this one has a mono speaker */
654 .matches = {
655 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
656 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TAF"),
657 },
658 .driver_data = (void *)(BYT_RT5640_IN1_MAP |
659 BYT_RT5640_JD_SRC_JD2_IN4N |
660 BYT_RT5640_OVCD_TH_2000UA |
661 BYT_RT5640_OVCD_SF_0P75 |
662 BYT_RT5640_MONO_SPEAKER |
663 BYT_RT5640_DIFF_MIC |
664 BYT_RT5640_SSP0_AIF2 |
665 BYT_RT5640_MCLK_EN),
666 },
667 {
668 /* Asus T100TA and T100TAM, must come after T100TAF (mono spk) match */
669 .matches = {
670 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
671 DMI_MATCH(DMI_PRODUCT_NAME, "T100TA"),
672 },
673 .driver_data = (void *)(BYT_RT5640_IN1_MAP |
674 BYT_RT5640_JD_SRC_JD2_IN4N |
675 BYT_RT5640_OVCD_TH_2000UA |
676 BYT_RT5640_OVCD_SF_0P75 |
677 BYT_RT5640_MCLK_EN),
678 },
679 {
680 .matches = {
681 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
682 DMI_MATCH(DMI_PRODUCT_NAME, "TF103C"),
683 },
684 .driver_data = (void *)(BYT_RT5640_IN1_MAP |
685 BYT_RT5640_JD_SRC_EXT_GPIO |
686 BYT_RT5640_OVCD_TH_2000UA |
687 BYT_RT5640_OVCD_SF_0P75 |
688 BYT_RT5640_SSP0_AIF1 |
689 BYT_RT5640_MCLK_EN |
690 BYT_RT5640_USE_AMCR0F28),
691 },
692 { /* Chuwi Vi8 (CWI506) */
693 .matches = {
694 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Insyde"),
695 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "i86"),
696 /* The above are too generic, also match BIOS info */
697 DMI_MATCH(DMI_BIOS_VERSION, "CHUWI.D86JLBNR"),
698 },
699 .driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
700 BYT_RT5640_MONO_SPEAKER |
701 BYT_RT5640_SSP0_AIF1 |
702 BYT_RT5640_MCLK_EN),
703 },
704 { /* Chuwi Vi8 dual-boot (CWI506) */
705 .matches = {
706 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Insyde"),
707 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "i86"),
708 /* The above are too generic, also match BIOS info */
709 DMI_MATCH(DMI_BIOS_VERSION, "CHUWI2.D86JHBNR02"),
710 },
711 .driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
712 BYT_RT5640_MONO_SPEAKER |
713 BYT_RT5640_SSP0_AIF1 |
714 BYT_RT5640_MCLK_EN),
715 },
716 {
717 /* Chuwi Vi10 (CWI505) */
718 .matches = {
719 DMI_MATCH(DMI_BOARD_VENDOR, "Hampoo"),
720 DMI_MATCH(DMI_BOARD_NAME, "BYT-PF02"),
721 DMI_MATCH(DMI_SYS_VENDOR, "ilife"),
722 DMI_MATCH(DMI_PRODUCT_NAME, "S165"),
723 },
724 .driver_data = (void *)(BYT_RT5640_IN1_MAP |
725 BYT_RT5640_JD_SRC_JD2_IN4N |
726 BYT_RT5640_OVCD_TH_2000UA |
727 BYT_RT5640_OVCD_SF_0P75 |
728 BYT_RT5640_DIFF_MIC |
729 BYT_RT5640_SSP0_AIF1 |
730 BYT_RT5640_MCLK_EN),
731 },
732 {
733 /* Chuwi Hi8 (CWI509) */
734 .matches = {
735 DMI_MATCH(DMI_BOARD_VENDOR, "Hampoo"),
736 DMI_MATCH(DMI_BOARD_NAME, "BYT-PA03C"),
737 DMI_MATCH(DMI_SYS_VENDOR, "ilife"),
738 DMI_MATCH(DMI_PRODUCT_NAME, "S806"),
739 },
740 .driver_data = (void *)(BYT_RT5640_IN1_MAP |
741 BYT_RT5640_JD_SRC_JD2_IN4N |
742 BYT_RT5640_OVCD_TH_2000UA |
743 BYT_RT5640_OVCD_SF_0P75 |
744 BYT_RT5640_MONO_SPEAKER |
745 BYT_RT5640_DIFF_MIC |
746 BYT_RT5640_SSP0_AIF1 |
747 BYT_RT5640_MCLK_EN),
748 },
749 {
750 .matches = {
751 DMI_MATCH(DMI_SYS_VENDOR, "Circuitco"),
752 DMI_MATCH(DMI_PRODUCT_NAME, "Minnowboard Max B3 PLATFORM"),
753 },
754 .driver_data = (void *)(BYT_RT5640_DMIC1_MAP),
755 },
756 { /* Connect Tablet 9 */
757 .matches = {
758 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Connect"),
759 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Tablet 9"),
760 },
761 .driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
762 BYT_RT5640_MONO_SPEAKER |
763 BYT_RT5640_SSP0_AIF1 |
764 BYT_RT5640_MCLK_EN),
765 },
766 {
767 .matches = {
768 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
769 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Venue 8 Pro 5830"),
770 },
771 .driver_data = (void *)(BYT_RT5640_DMIC1_MAP |
772 BYT_RT5640_JD_SRC_JD2_IN4N |
773 BYT_RT5640_OVCD_TH_2000UA |
774 BYT_RT5640_OVCD_SF_0P75 |
775 BYT_RT5640_MONO_SPEAKER |
776 BYT_RT5640_MCLK_EN),
777 },
778 { /* Estar Beauty HD MID 7316R */
779 .matches = {
780 DMI_MATCH(DMI_SYS_VENDOR, "Estar"),
781 DMI_MATCH(DMI_PRODUCT_NAME, "eSTAR BEAUTY HD Intel Quad core"),
782 },
783 .driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
784 BYT_RT5640_MONO_SPEAKER |
785 BYT_RT5640_SSP0_AIF1 |
786 BYT_RT5640_MCLK_EN),
787 },
788 { /* Glavey TM800A550L */
789 .matches = {
790 DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
791 DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"),
792 /* Above strings are too generic, also match on BIOS version */
793 DMI_MATCH(DMI_BIOS_VERSION, "ZY-8-BI-PX4S70VTR400-X423B-005-D"),
794 },
795 .driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
796 BYT_RT5640_SSP0_AIF1 |
797 BYT_RT5640_MCLK_EN),
798 },
799 {
800 .matches = {
801 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
802 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HP ElitePad 1000 G2"),
803 },
804 .driver_data = (void *)(BYT_RT5640_DMIC2_MAP |
805 BYT_RT5640_MCLK_EN |
806 BYT_RT5640_LINEOUT |
807 BYT_RT5640_LINEOUT_AS_HP2 |
808 BYT_RT5640_HSMIC2_ON_IN1 |
809 BYT_RT5640_JD_HP_ELITEP_1000G2),
810 },
811 { /* HP Pavilion x2 10-k0XX, 10-n0XX */
812 .matches = {
813 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
814 DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion x2 Detachable"),
815 },
816 .driver_data = (void *)(BYT_RT5640_DMIC1_MAP |
817 BYT_RT5640_JD_SRC_JD2_IN4N |
818 BYT_RT5640_OVCD_TH_1500UA |
819 BYT_RT5640_OVCD_SF_0P75 |
820 BYT_RT5640_SSP0_AIF1 |
821 BYT_RT5640_MCLK_EN),
822 },
823 { /* HP Pavilion x2 10-p0XX */
824 .matches = {
825 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
826 DMI_MATCH(DMI_PRODUCT_NAME, "HP x2 Detachable 10-p0XX"),
827 },
828 .driver_data = (void *)(BYT_RT5640_DMIC1_MAP |
829 BYT_RT5640_JD_SRC_JD1_IN4P |
830 BYT_RT5640_OVCD_TH_2000UA |
831 BYT_RT5640_OVCD_SF_0P75 |
832 BYT_RT5640_MCLK_EN),
833 },
834 { /* HP Pro Tablet 408 */
835 .matches = {
836 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
837 DMI_MATCH(DMI_PRODUCT_NAME, "HP Pro Tablet 408"),
838 },
839 .driver_data = (void *)(BYT_RT5640_DMIC1_MAP |
840 BYT_RT5640_JD_SRC_JD2_IN4N |
841 BYT_RT5640_OVCD_TH_1500UA |
842 BYT_RT5640_OVCD_SF_0P75 |
843 BYT_RT5640_SSP0_AIF1 |
844 BYT_RT5640_MCLK_EN),
845 },
846 { /* HP Stream 7 */
847 .matches = {
848 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
849 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HP Stream 7 Tablet"),
850 },
851 .driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
852 BYT_RT5640_MONO_SPEAKER |
853 BYT_RT5640_JD_NOT_INV |
854 BYT_RT5640_SSP0_AIF1 |
855 BYT_RT5640_MCLK_EN),
856 },
857 { /* HP Stream 8 */
858 .matches = {
859 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
860 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HP Stream 8 Tablet"),
861 },
862 .driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
863 BYT_RT5640_JD_NOT_INV |
864 BYT_RT5640_SSP0_AIF1 |
865 BYT_RT5640_MCLK_EN),
866 },
867 { /* I.T.Works TW891 */
868 .matches = {
869 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "To be filled by O.E.M."),
870 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "TW891"),
871 DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "To be filled by O.E.M."),
872 DMI_EXACT_MATCH(DMI_BOARD_NAME, "TW891"),
873 },
874 .driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
875 BYT_RT5640_MONO_SPEAKER |
876 BYT_RT5640_SSP0_AIF1 |
877 BYT_RT5640_MCLK_EN),
878 },
879 { /* Lamina I8270 / T701BR.SE */
880 .matches = {
881 DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Lamina"),
882 DMI_EXACT_MATCH(DMI_BOARD_NAME, "T701BR.SE"),
883 },
884 .driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
885 BYT_RT5640_MONO_SPEAKER |
886 BYT_RT5640_JD_NOT_INV |
887 BYT_RT5640_SSP0_AIF1 |
888 BYT_RT5640_MCLK_EN),
889 },
890 { /* Lenovo Miix 2 8 */
891 .matches = {
892 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LENOVO"),
893 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "20326"),
894 DMI_EXACT_MATCH(DMI_BOARD_NAME, "Hiking"),
895 },
896 .driver_data = (void *)(BYT_RT5640_DMIC1_MAP |
897 BYT_RT5640_JD_SRC_JD2_IN4N |
898 BYT_RT5640_OVCD_TH_2000UA |
899 BYT_RT5640_OVCD_SF_0P75 |
900 BYT_RT5640_MONO_SPEAKER |
901 BYT_RT5640_MCLK_EN),
902 },
903 { /* Lenovo Miix 3-830 */
904 .matches = {
905 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LENOVO"),
906 DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "Lenovo MIIX 3-830"),
907 },
908 .driver_data = (void *)(BYT_RT5640_IN1_MAP |
909 BYT_RT5640_JD_SRC_JD2_IN4N |
910 BYT_RT5640_OVCD_TH_2000UA |
911 BYT_RT5640_OVCD_SF_0P75 |
912 BYT_RT5640_MONO_SPEAKER |
913 BYT_RT5640_DIFF_MIC |
914 BYT_RT5640_SSP0_AIF1 |
915 BYT_RT5640_MCLK_EN),
916 },
917 { /* Linx Linx7 tablet */
918 .matches = {
919 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LINX"),
920 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "LINX7"),
921 },
922 .driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
923 BYT_RT5640_MONO_SPEAKER |
924 BYT_RT5640_JD_NOT_INV |
925 BYT_RT5640_SSP0_AIF1 |
926 BYT_RT5640_MCLK_EN),
927 },
928 {
929 /* Medion Lifetab S10346 */
930 .matches = {
931 DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
932 DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"),
933 /* Above strings are much too generic, also match on BIOS date */
934 DMI_MATCH(DMI_BIOS_DATE, "10/22/2015"),
935 },
936 .driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
937 BYT_RT5640_SWAPPED_SPEAKERS |
938 BYT_RT5640_SSP0_AIF1 |
939 BYT_RT5640_MCLK_EN),
940 },
941 { /* Mele PCG03 Mini PC */
942 .matches = {
943 DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Mini PC"),
944 DMI_EXACT_MATCH(DMI_BOARD_NAME, "Mini PC"),
945 },
946 .driver_data = (void *)(BYT_RT5640_NO_INTERNAL_MIC_MAP |
947 BYT_RT5640_NO_SPEAKERS |
948 BYT_RT5640_SSP0_AIF1),
949 },
950 { /* MPMAN Converter 9, similar hw as the I.T.Works TW891 2-in-1 */
951 .matches = {
952 DMI_MATCH(DMI_SYS_VENDOR, "MPMAN"),
953 DMI_MATCH(DMI_PRODUCT_NAME, "Converter9"),
954 },
955 .driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
956 BYT_RT5640_MONO_SPEAKER |
957 BYT_RT5640_SSP0_AIF1 |
958 BYT_RT5640_MCLK_EN),
959 },
960 {
961 /* MPMAN MPWIN895CL */
962 .matches = {
963 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "MPMAN"),
964 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "MPWIN8900CL"),
965 },
966 .driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
967 BYT_RT5640_MONO_SPEAKER |
968 BYT_RT5640_SSP0_AIF1 |
969 BYT_RT5640_MCLK_EN),
970 },
971 { /* MSI S100 tablet */
972 .matches = {
973 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Micro-Star International Co., Ltd."),
974 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "S100"),
975 },
976 .driver_data = (void *)(BYT_RT5640_IN1_MAP |
977 BYT_RT5640_JD_SRC_JD2_IN4N |
978 BYT_RT5640_OVCD_TH_2000UA |
979 BYT_RT5640_OVCD_SF_0P75 |
980 BYT_RT5640_MONO_SPEAKER |
981 BYT_RT5640_DIFF_MIC |
982 BYT_RT5640_MCLK_EN),
983 },
984 { /* Nuvison/TMax TM800W560 */
985 .matches = {
986 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TMAX"),
987 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "TM800W560L"),
988 },
989 .driver_data = (void *)(BYT_RT5640_IN1_MAP |
990 BYT_RT5640_JD_SRC_JD2_IN4N |
991 BYT_RT5640_OVCD_TH_2000UA |
992 BYT_RT5640_OVCD_SF_0P75 |
993 BYT_RT5640_JD_NOT_INV |
994 BYT_RT5640_DIFF_MIC |
995 BYT_RT5640_SSP0_AIF1 |
996 BYT_RT5640_MCLK_EN),
997 },
998 { /* Onda v975w */
999 .matches = {
1000 DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
1001 DMI_EXACT_MATCH(DMI_BOARD_NAME, "Aptio CRB"),
1002 /* The above are too generic, also match BIOS info */
1003 DMI_EXACT_MATCH(DMI_BIOS_VERSION, "5.6.5"),
1004 DMI_EXACT_MATCH(DMI_BIOS_DATE, "07/25/2014"),
1005 },
1006 .driver_data = (void *)(BYT_RT5640_IN1_MAP |
1007 BYT_RT5640_JD_SRC_JD2_IN4N |
1008 BYT_RT5640_OVCD_TH_2000UA |
1009 BYT_RT5640_OVCD_SF_0P75 |
1010 BYT_RT5640_DIFF_MIC |
1011 BYT_RT5640_MCLK_EN),
1012 },
1013 { /* Pipo W4 */
1014 .matches = {
1015 DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
1016 DMI_EXACT_MATCH(DMI_BOARD_NAME, "Aptio CRB"),
1017 /* The above are too generic, also match BIOS info */
1018 DMI_MATCH(DMI_BIOS_VERSION, "V8L_WIN32_CHIPHD"),
1019 },
1020 .driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
1021 BYT_RT5640_MONO_SPEAKER |
1022 BYT_RT5640_SSP0_AIF1 |
1023 BYT_RT5640_MCLK_EN),
1024 },
1025 { /* Point of View Mobii TAB-P800W (V2.0) */
1026 .matches = {
1027 DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
1028 DMI_EXACT_MATCH(DMI_BOARD_NAME, "Aptio CRB"),
1029 /* The above are too generic, also match BIOS info */
1030 DMI_EXACT_MATCH(DMI_BIOS_VERSION, "3BAIR1014"),
1031 DMI_EXACT_MATCH(DMI_BIOS_DATE, "10/24/2014"),
1032 },
1033 .driver_data = (void *)(BYT_RT5640_IN1_MAP |
1034 BYT_RT5640_JD_SRC_JD2_IN4N |
1035 BYT_RT5640_OVCD_TH_2000UA |
1036 BYT_RT5640_OVCD_SF_0P75 |
1037 BYT_RT5640_MONO_SPEAKER |
1038 BYT_RT5640_DIFF_MIC |
1039 BYT_RT5640_SSP0_AIF2 |
1040 BYT_RT5640_MCLK_EN),
1041 },
1042 { /* Point of View Mobii TAB-P800W (V2.1) */
1043 .matches = {
1044 DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
1045 DMI_EXACT_MATCH(DMI_BOARD_NAME, "Aptio CRB"),
1046 /* The above are too generic, also match BIOS info */
1047 DMI_EXACT_MATCH(DMI_BIOS_VERSION, "3BAIR1013"),
1048 DMI_EXACT_MATCH(DMI_BIOS_DATE, "08/22/2014"),
1049 },
1050 .driver_data = (void *)(BYT_RT5640_IN1_MAP |
1051 BYT_RT5640_JD_SRC_JD2_IN4N |
1052 BYT_RT5640_OVCD_TH_2000UA |
1053 BYT_RT5640_OVCD_SF_0P75 |
1054 BYT_RT5640_MONO_SPEAKER |
1055 BYT_RT5640_DIFF_MIC |
1056 BYT_RT5640_SSP0_AIF2 |
1057 BYT_RT5640_MCLK_EN),
1058 },
1059 { /* Point of View Mobii TAB-P1005W-232 (V2.0) */
1060 .matches = {
1061 DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "POV"),
1062 DMI_EXACT_MATCH(DMI_BOARD_NAME, "I102A"),
1063 },
1064 .driver_data = (void *)(BYT_RT5640_IN1_MAP |
1065 BYT_RT5640_JD_SRC_JD2_IN4N |
1066 BYT_RT5640_OVCD_TH_2000UA |
1067 BYT_RT5640_OVCD_SF_0P75 |
1068 BYT_RT5640_DIFF_MIC |
1069 BYT_RT5640_SSP0_AIF1 |
1070 BYT_RT5640_MCLK_EN),
1071 },
1072 {
1073 /* Prowise PT301 */
1074 .matches = {
1075 DMI_MATCH(DMI_SYS_VENDOR, "Prowise"),
1076 DMI_MATCH(DMI_PRODUCT_NAME, "PT301"),
1077 },
1078 .driver_data = (void *)(BYT_RT5640_IN1_MAP |
1079 BYT_RT5640_JD_SRC_JD2_IN4N |
1080 BYT_RT5640_OVCD_TH_2000UA |
1081 BYT_RT5640_OVCD_SF_0P75 |
1082 BYT_RT5640_DIFF_MIC |
1083 BYT_RT5640_SSP0_AIF1 |
1084 BYT_RT5640_MCLK_EN),
1085 },
1086 {
1087 /* Teclast X89 */
1088 .matches = {
1089 DMI_MATCH(DMI_BOARD_VENDOR, "TECLAST"),
1090 DMI_MATCH(DMI_BOARD_NAME, "tPAD"),
1091 },
1092 .driver_data = (void *)(BYT_RT5640_IN3_MAP |
1093 BYT_RT5640_JD_SRC_JD1_IN4P |
1094 BYT_RT5640_OVCD_TH_2000UA |
1095 BYT_RT5640_OVCD_SF_1P0 |
1096 BYT_RT5640_SSP0_AIF1 |
1097 BYT_RT5640_MCLK_EN),
1098 },
1099 { /* Toshiba Satellite Click Mini L9W-B */
1100 .matches = {
1101 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
1102 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "SATELLITE Click Mini L9W-B"),
1103 },
1104 .driver_data = (void *)(BYT_RT5640_DMIC1_MAP |
1105 BYT_RT5640_JD_SRC_JD2_IN4N |
1106 BYT_RT5640_OVCD_TH_1500UA |
1107 BYT_RT5640_OVCD_SF_0P75 |
1108 BYT_RT5640_SSP0_AIF1 |
1109 BYT_RT5640_MCLK_EN),
1110 },
1111 { /* Toshiba Encore WT8-A */
1112 .matches = {
1113 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
1114 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "TOSHIBA WT8-A"),
1115 },
1116 .driver_data = (void *)(BYT_RT5640_DMIC1_MAP |
1117 BYT_RT5640_JD_SRC_JD2_IN4N |
1118 BYT_RT5640_OVCD_TH_2000UA |
1119 BYT_RT5640_OVCD_SF_0P75 |
1120 BYT_RT5640_JD_NOT_INV |
1121 BYT_RT5640_MCLK_EN),
1122 },
1123 { /* Toshiba Encore WT10-A */
1124 .matches = {
1125 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
1126 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "TOSHIBA WT10-A-103"),
1127 },
1128 .driver_data = (void *)(BYT_RT5640_DMIC1_MAP |
1129 BYT_RT5640_JD_SRC_JD1_IN4P |
1130 BYT_RT5640_OVCD_TH_2000UA |
1131 BYT_RT5640_OVCD_SF_0P75 |
1132 BYT_RT5640_SSP0_AIF2 |
1133 BYT_RT5640_MCLK_EN),
1134 },
1135 {
1136 /* Vexia Edu Atla 10 tablet 5V version */
1137 .matches = {
1138 /* Having all 3 of these not set is somewhat unique */
1139 DMI_MATCH(DMI_SYS_VENDOR, "To be filled by O.E.M."),
1140 DMI_MATCH(DMI_PRODUCT_NAME, "To be filled by O.E.M."),
1141 DMI_MATCH(DMI_BOARD_NAME, "To be filled by O.E.M."),
1142 /* Above strings are too generic, also match on BIOS date */
1143 DMI_MATCH(DMI_BIOS_DATE, "05/14/2015"),
1144 },
1145 .driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
1146 BYT_RT5640_JD_NOT_INV |
1147 BYT_RT5640_SSP0_AIF1 |
1148 BYT_RT5640_MCLK_EN),
1149 },
1150 { /* Vexia Edu Atla 10 tablet 9V version */
1151 .matches = {
1152 DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
1153 DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"),
1154 /* Above strings are too generic, also match on BIOS date */
1155 DMI_MATCH(DMI_BIOS_DATE, "08/25/2014"),
1156 },
1157 .driver_data = (void *)(BYT_RT5640_IN1_MAP |
1158 BYT_RT5640_JD_SRC_JD2_IN4N |
1159 BYT_RT5640_OVCD_TH_2000UA |
1160 BYT_RT5640_OVCD_SF_0P75 |
1161 BYT_RT5640_DIFF_MIC |
1162 BYT_RT5640_SSP0_AIF2 |
1163 BYT_RT5640_MCLK_EN),
1164 },
1165 { /* Voyo Winpad A15 */
1166 .matches = {
1167 DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
1168 DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"),
1169 /* Above strings are too generic, also match on BIOS date */
1170 DMI_MATCH(DMI_BIOS_DATE, "11/20/2014"),
1171 },
1172 .driver_data = (void *)(BYT_RT5640_IN1_MAP |
1173 BYT_RT5640_JD_SRC_JD2_IN4N |
1174 BYT_RT5640_OVCD_TH_2000UA |
1175 BYT_RT5640_OVCD_SF_0P75 |
1176 BYT_RT5640_DIFF_MIC |
1177 BYT_RT5640_MCLK_EN),
1178 },
1179 { /* Catch-all for generic Insyde tablets, must be last */
1180 .matches = {
1181 DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
1182 },
1183 .driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
1184 BYT_RT5640_MCLK_EN |
1185 BYT_RT5640_SSP0_AIF1),
1186
1187 },
1188 {}
1189};
1190
1191/*
1192 * Note this MUST be called before snd_soc_register_card(), so that the props
1193 * are in place before the codec component driver's probe function parses them.
1194 */
1195static int byt_rt5640_add_codec_device_props(struct device *i2c_dev,
1196 struct byt_rt5640_private *priv)
1197{
1198 struct property_entry props[MAX_NO_PROPS] = {};
1199 struct fwnode_handle *fwnode;
1200 int cnt = 0;
1201 int ret;
1202
1203 switch (BYT_RT5640_MAP(byt_rt5640_quirk)) {
1204 case BYT_RT5640_DMIC1_MAP:
1205 props[cnt++] = PROPERTY_ENTRY_U32("realtek,dmic1-data-pin",
1206 RT5640_DMIC1_DATA_PIN_IN1P);
1207 break;
1208 case BYT_RT5640_DMIC2_MAP:
1209 props[cnt++] = PROPERTY_ENTRY_U32("realtek,dmic2-data-pin",
1210 RT5640_DMIC2_DATA_PIN_IN1N);
1211 break;
1212 case BYT_RT5640_IN1_MAP:
1213 if (byt_rt5640_quirk & BYT_RT5640_DIFF_MIC)
1214 props[cnt++] =
1215 PROPERTY_ENTRY_BOOL("realtek,in1-differential");
1216 break;
1217 case BYT_RT5640_IN3_MAP:
1218 if (byt_rt5640_quirk & BYT_RT5640_DIFF_MIC)
1219 props[cnt++] =
1220 PROPERTY_ENTRY_BOOL("realtek,in3-differential");
1221 break;
1222 }
1223
1224 if (BYT_RT5640_JDSRC(byt_rt5640_quirk)) {
1225 if (BYT_RT5640_JDSRC(byt_rt5640_quirk) != RT5640_JD_SRC_EXT_GPIO) {
1226 props[cnt++] = PROPERTY_ENTRY_U32(
1227 "realtek,jack-detect-source",
1228 BYT_RT5640_JDSRC(byt_rt5640_quirk));
1229 }
1230
1231 props[cnt++] = PROPERTY_ENTRY_U32(
1232 "realtek,over-current-threshold-microamp",
1233 BYT_RT5640_OVCD_TH(byt_rt5640_quirk) * 100);
1234
1235 props[cnt++] = PROPERTY_ENTRY_U32(
1236 "realtek,over-current-scale-factor",
1237 BYT_RT5640_OVCD_SF(byt_rt5640_quirk));
1238 }
1239
1240 if (byt_rt5640_quirk & BYT_RT5640_JD_NOT_INV)
1241 props[cnt++] = PROPERTY_ENTRY_BOOL("realtek,jack-detect-not-inverted");
1242
1243 fwnode = fwnode_create_software_node(props, NULL);
1244 if (IS_ERR(fwnode)) {
1245 /* put_device() is handled in caller */
1246 return PTR_ERR(fwnode);
1247 }
1248
1249 ret = device_add_software_node(i2c_dev, to_software_node(fwnode));
1250
1251 fwnode_handle_put(fwnode);
1252
1253 return ret;
1254}
1255
1256/* Some Android devs specify IRQs/GPIOS in a special AMCR0F28 ACPI device */
1257static const struct acpi_gpio_params amcr0f28_jd_gpio = { 1, 0, false };
1258
1259static const struct acpi_gpio_mapping amcr0f28_gpios[] = {
1260 { "rt5640-jd-gpios", &amcr0f28_jd_gpio, 1 },
1261 { }
1262};
1263
1264static int byt_rt5640_get_amcr0f28_settings(struct snd_soc_card *card)
1265{
1266 struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card);
1267 struct rt5640_set_jack_data *data = &priv->jack_data;
1268 struct acpi_device *adev;
1269 int ret = 0;
1270
1271 adev = acpi_dev_get_first_match_dev("AMCR0F28", "1", -1);
1272 if (!adev) {
1273 dev_err(card->dev, "error cannot find AMCR0F28 adev\n");
1274 return -ENOENT;
1275 }
1276
1277 data->codec_irq_override = acpi_dev_gpio_irq_get(adev, 0);
1278 if (data->codec_irq_override < 0) {
1279 ret = data->codec_irq_override;
1280 dev_err(card->dev, "error %d getting codec IRQ\n", ret);
1281 goto put_adev;
1282 }
1283
1284 if (BYT_RT5640_JDSRC(byt_rt5640_quirk) == RT5640_JD_SRC_EXT_GPIO) {
1285 acpi_dev_add_driver_gpios(adev, amcr0f28_gpios);
1286 data->jd_gpio = devm_fwnode_gpiod_get(card->dev, acpi_fwnode_handle(adev),
1287 "rt5640-jd", GPIOD_IN, "rt5640-jd");
1288 acpi_dev_remove_driver_gpios(adev);
1289
1290 if (IS_ERR(data->jd_gpio)) {
1291 ret = PTR_ERR(data->jd_gpio);
1292 dev_err(card->dev, "error %d getting jd GPIO\n", ret);
1293 }
1294 }
1295
1296put_adev:
1297 acpi_dev_put(adev);
1298 return ret;
1299}
1300
1301static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime)
1302{
1303 struct snd_soc_card *card = runtime->card;
1304 struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card);
1305 struct rt5640_set_jack_data *jack_data = &priv->jack_data;
1306 struct snd_soc_component *component = snd_soc_rtd_to_codec(runtime, 0)->component;
1307 const struct snd_soc_dapm_route *custom_map = NULL;
1308 int num_routes = 0;
1309 int ret;
1310
1311 card->dapm.idle_bias_off = true;
1312 jack_data->use_platform_clock = true;
1313
1314 /* Start with RC clk for jack-detect (we disable MCLK below) */
1315 if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN)
1316 snd_soc_component_update_bits(component, RT5640_GLB_CLK,
1317 RT5640_SCLK_SRC_MASK, RT5640_SCLK_SRC_RCCLK);
1318
1319 rt5640_sel_asrc_clk_src(component,
1320 RT5640_DA_STEREO_FILTER |
1321 RT5640_DA_MONO_L_FILTER |
1322 RT5640_DA_MONO_R_FILTER |
1323 RT5640_AD_STEREO_FILTER |
1324 RT5640_AD_MONO_L_FILTER |
1325 RT5640_AD_MONO_R_FILTER,
1326 RT5640_CLK_SEL_ASRC);
1327
1328 ret = snd_soc_add_card_controls(card, byt_rt5640_controls,
1329 ARRAY_SIZE(byt_rt5640_controls));
1330 if (ret) {
1331 dev_err(card->dev, "unable to add card controls\n");
1332 return ret;
1333 }
1334
1335 switch (BYT_RT5640_MAP(byt_rt5640_quirk)) {
1336 case BYT_RT5640_IN1_MAP:
1337 custom_map = byt_rt5640_intmic_in1_map;
1338 num_routes = ARRAY_SIZE(byt_rt5640_intmic_in1_map);
1339 break;
1340 case BYT_RT5640_IN3_MAP:
1341 custom_map = byt_rt5640_intmic_in3_map;
1342 num_routes = ARRAY_SIZE(byt_rt5640_intmic_in3_map);
1343 break;
1344 case BYT_RT5640_DMIC1_MAP:
1345 custom_map = byt_rt5640_intmic_dmic1_map;
1346 num_routes = ARRAY_SIZE(byt_rt5640_intmic_dmic1_map);
1347 break;
1348 case BYT_RT5640_DMIC2_MAP:
1349 custom_map = byt_rt5640_intmic_dmic2_map;
1350 num_routes = ARRAY_SIZE(byt_rt5640_intmic_dmic2_map);
1351 break;
1352 }
1353
1354 ret = snd_soc_dapm_add_routes(&card->dapm, custom_map, num_routes);
1355 if (ret)
1356 return ret;
1357
1358 if (byt_rt5640_quirk & BYT_RT5640_HSMIC2_ON_IN1) {
1359 ret = snd_soc_dapm_add_routes(&card->dapm,
1360 byt_rt5640_hsmic2_in1_map,
1361 ARRAY_SIZE(byt_rt5640_hsmic2_in1_map));
1362 if (ret)
1363 return ret;
1364 }
1365
1366 if (byt_rt5640_quirk & BYT_RT5640_SSP2_AIF2) {
1367 ret = snd_soc_dapm_add_routes(&card->dapm,
1368 byt_rt5640_ssp2_aif2_map,
1369 ARRAY_SIZE(byt_rt5640_ssp2_aif2_map));
1370 } else if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) {
1371 ret = snd_soc_dapm_add_routes(&card->dapm,
1372 byt_rt5640_ssp0_aif1_map,
1373 ARRAY_SIZE(byt_rt5640_ssp0_aif1_map));
1374 } else if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF2) {
1375 ret = snd_soc_dapm_add_routes(&card->dapm,
1376 byt_rt5640_ssp0_aif2_map,
1377 ARRAY_SIZE(byt_rt5640_ssp0_aif2_map));
1378 } else {
1379 ret = snd_soc_dapm_add_routes(&card->dapm,
1380 byt_rt5640_ssp2_aif1_map,
1381 ARRAY_SIZE(byt_rt5640_ssp2_aif1_map));
1382 }
1383 if (ret)
1384 return ret;
1385
1386 if (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) {
1387 ret = snd_soc_dapm_add_routes(&card->dapm,
1388 byt_rt5640_mono_spk_map,
1389 ARRAY_SIZE(byt_rt5640_mono_spk_map));
1390 } else if (!(byt_rt5640_quirk & BYT_RT5640_NO_SPEAKERS)) {
1391 ret = snd_soc_dapm_add_routes(&card->dapm,
1392 byt_rt5640_stereo_spk_map,
1393 ARRAY_SIZE(byt_rt5640_stereo_spk_map));
1394 }
1395 if (ret)
1396 return ret;
1397
1398 if (byt_rt5640_quirk & BYT_RT5640_LINEOUT) {
1399 ret = snd_soc_dapm_add_routes(&card->dapm,
1400 byt_rt5640_lineout_map,
1401 ARRAY_SIZE(byt_rt5640_lineout_map));
1402 if (ret)
1403 return ret;
1404 }
1405
1406 /*
1407 * The firmware might enable the clock at boot (this information
1408 * may or may not be reflected in the enable clock register).
1409 * To change the rate we must disable the clock first to cover
1410 * these cases. Due to common clock framework restrictions that
1411 * do not allow to disable a clock that has not been enabled,
1412 * we need to enable the clock first.
1413 */
1414 ret = clk_prepare_enable(priv->mclk);
1415 if (!ret)
1416 clk_disable_unprepare(priv->mclk);
1417
1418 if (byt_rt5640_quirk & BYT_RT5640_MCLK_25MHZ)
1419 ret = clk_set_rate(priv->mclk, 25000000);
1420 else
1421 ret = clk_set_rate(priv->mclk, 19200000);
1422 if (ret) {
1423 dev_err(card->dev, "unable to set MCLK rate\n");
1424 return ret;
1425 }
1426
1427 if (BYT_RT5640_JDSRC(byt_rt5640_quirk)) {
1428 ret = snd_soc_card_jack_new_pins(card, "Headset",
1429 SND_JACK_HEADSET | SND_JACK_BTN_0,
1430 &priv->jack, rt5640_pins,
1431 ARRAY_SIZE(rt5640_pins));
1432 if (ret) {
1433 dev_err(card->dev, "Jack creation failed %d\n", ret);
1434 return ret;
1435 }
1436 snd_jack_set_key(priv->jack.jack, SND_JACK_BTN_0,
1437 KEY_PLAYPAUSE);
1438
1439 if (byt_rt5640_quirk & BYT_RT5640_USE_AMCR0F28) {
1440 ret = byt_rt5640_get_amcr0f28_settings(card);
1441 if (ret)
1442 return ret;
1443 }
1444
1445 snd_soc_component_set_jack(component, &priv->jack, &priv->jack_data);
1446 }
1447
1448 if (byt_rt5640_quirk & BYT_RT5640_JD_HP_ELITEP_1000G2) {
1449 ret = snd_soc_card_jack_new_pins(card, "Headset",
1450 SND_JACK_HEADSET,
1451 &priv->jack, rt5640_pins,
1452 ARRAY_SIZE(rt5640_pins));
1453 if (ret)
1454 return ret;
1455
1456 ret = snd_soc_card_jack_new_pins(card, "Headset 2",
1457 SND_JACK_HEADSET,
1458 &priv->jack2, rt5640_pins2,
1459 ARRAY_SIZE(rt5640_pins2));
1460 if (ret)
1461 return ret;
1462
1463 rt5640_jack_gpio.data = priv;
1464 rt5640_jack_gpio.gpiod_dev = priv->codec_dev;
1465 rt5640_jack_gpio.jack_status_check = byt_rt5640_hp_elitepad_1000g2_jack1_check;
1466 ret = snd_soc_jack_add_gpios(&priv->jack, 1, &rt5640_jack_gpio);
1467 if (ret)
1468 return ret;
1469
1470 rt5640_set_ovcd_params(component);
1471 rt5640_jack2_gpio.data = component;
1472 rt5640_jack2_gpio.gpiod_dev = priv->codec_dev;
1473 rt5640_jack2_gpio.jack_status_check = byt_rt5640_hp_elitepad_1000g2_jack2_check;
1474 ret = snd_soc_jack_add_gpios(&priv->jack2, 1, &rt5640_jack2_gpio);
1475 if (ret) {
1476 snd_soc_jack_free_gpios(&priv->jack, 1, &rt5640_jack_gpio);
1477 return ret;
1478 }
1479 }
1480
1481 return 0;
1482}
1483
1484static void byt_rt5640_exit(struct snd_soc_pcm_runtime *runtime)
1485{
1486 struct snd_soc_card *card = runtime->card;
1487 struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card);
1488
1489 if (byt_rt5640_quirk & BYT_RT5640_JD_HP_ELITEP_1000G2) {
1490 snd_soc_jack_free_gpios(&priv->jack2, 1, &rt5640_jack2_gpio);
1491 snd_soc_jack_free_gpios(&priv->jack, 1, &rt5640_jack_gpio);
1492 }
1493}
1494
1495static int byt_rt5640_codec_fixup(struct snd_soc_pcm_runtime *rtd,
1496 struct snd_pcm_hw_params *params)
1497{
1498 struct snd_interval *rate = hw_param_interval(params,
1499 SNDRV_PCM_HW_PARAM_RATE);
1500 struct snd_interval *channels = hw_param_interval(params,
1501 SNDRV_PCM_HW_PARAM_CHANNELS);
1502 int ret, bits;
1503
1504 /* The DSP will convert the FE rate to 48k, stereo */
1505 rate->min = rate->max = 48000;
1506 channels->min = channels->max = 2;
1507
1508 if ((byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) ||
1509 (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF2)) {
1510 /* set SSP0 to 16-bit */
1511 params_set_format(params, SNDRV_PCM_FORMAT_S16_LE);
1512 bits = 16;
1513 } else {
1514 /* set SSP2 to 24-bit */
1515 params_set_format(params, SNDRV_PCM_FORMAT_S24_LE);
1516 bits = 24;
1517 }
1518
1519 /*
1520 * Default mode for SSP configuration is TDM 4 slot, override config
1521 * with explicit setting to I2S 2ch. The word length is set with
1522 * dai_set_tdm_slot() since there is no other API exposed
1523 */
1524 ret = snd_soc_dai_set_fmt(snd_soc_rtd_to_cpu(rtd, 0),
1525 SND_SOC_DAIFMT_I2S |
1526 SND_SOC_DAIFMT_NB_NF |
1527 SND_SOC_DAIFMT_BP_FP);
1528 if (ret < 0) {
1529 dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret);
1530 return ret;
1531 }
1532
1533 ret = snd_soc_dai_set_tdm_slot(snd_soc_rtd_to_cpu(rtd, 0), 0x3, 0x3, 2, bits);
1534 if (ret < 0) {
1535 dev_err(rtd->dev, "can't set I2S config, err %d\n", ret);
1536 return ret;
1537 }
1538
1539 return 0;
1540}
1541
1542static int byt_rt5640_aif1_startup(struct snd_pcm_substream *substream)
1543{
1544 return snd_pcm_hw_constraint_single(substream->runtime,
1545 SNDRV_PCM_HW_PARAM_RATE, 48000);
1546}
1547
1548static const struct snd_soc_ops byt_rt5640_aif1_ops = {
1549 .startup = byt_rt5640_aif1_startup,
1550};
1551
1552static const struct snd_soc_ops byt_rt5640_be_ssp2_ops = {
1553 .hw_params = byt_rt5640_aif1_hw_params,
1554};
1555
1556SND_SOC_DAILINK_DEF(dummy,
1557 DAILINK_COMP_ARRAY(COMP_DUMMY()));
1558
1559SND_SOC_DAILINK_DEF(media,
1560 DAILINK_COMP_ARRAY(COMP_CPU("media-cpu-dai")));
1561
1562SND_SOC_DAILINK_DEF(deepbuffer,
1563 DAILINK_COMP_ARRAY(COMP_CPU("deepbuffer-cpu-dai")));
1564
1565SND_SOC_DAILINK_DEF(ssp2_port,
1566 /* overwritten for ssp0 routing */
1567 DAILINK_COMP_ARRAY(COMP_CPU("ssp2-port")));
1568SND_SOC_DAILINK_DEF(ssp2_codec,
1569 DAILINK_COMP_ARRAY(COMP_CODEC(
1570 /* overwritten with HID */ "i2c-10EC5640:00",
1571 /* changed w/ quirk */ "rt5640-aif1")));
1572
1573SND_SOC_DAILINK_DEF(platform,
1574 DAILINK_COMP_ARRAY(COMP_PLATFORM("sst-mfld-platform")));
1575
1576static struct snd_soc_dai_link byt_rt5640_dais[] = {
1577 [MERR_DPCM_AUDIO] = {
1578 .name = "Baytrail Audio Port",
1579 .stream_name = "Baytrail Audio",
1580 .nonatomic = true,
1581 .dynamic = 1,
1582 .ops = &byt_rt5640_aif1_ops,
1583 SND_SOC_DAILINK_REG(media, dummy, platform),
1584 },
1585 [MERR_DPCM_DEEP_BUFFER] = {
1586 .name = "Deep-Buffer Audio Port",
1587 .stream_name = "Deep-Buffer Audio",
1588 .nonatomic = true,
1589 .dynamic = 1,
1590 .playback_only = 1,
1591 .ops = &byt_rt5640_aif1_ops,
1592 SND_SOC_DAILINK_REG(deepbuffer, dummy, platform),
1593 },
1594 /* back ends */
1595 {
1596 .name = "SSP2-Codec",
1597 .id = 0,
1598 .no_pcm = 1,
1599 .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
1600 | SND_SOC_DAIFMT_CBC_CFC,
1601 .be_hw_params_fixup = byt_rt5640_codec_fixup,
1602 .init = byt_rt5640_init,
1603 .exit = byt_rt5640_exit,
1604 .ops = &byt_rt5640_be_ssp2_ops,
1605 SND_SOC_DAILINK_REG(ssp2_port, ssp2_codec, platform),
1606 },
1607};
1608
1609/* SoC card */
1610static char byt_rt5640_codec_name[SND_ACPI_I2C_ID_LEN];
1611#if !IS_ENABLED(CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES)
1612static char byt_rt5640_long_name[40]; /* = "bytcr-rt5640-*-spk-*-mic" */
1613#endif
1614static char byt_rt5640_components[64]; /* = "cfg-spk:* cfg-mic:* ..." */
1615
1616static int byt_rt5640_suspend(struct snd_soc_card *card)
1617{
1618 struct snd_soc_component *component;
1619
1620 if (!BYT_RT5640_JDSRC(byt_rt5640_quirk))
1621 return 0;
1622
1623 for_each_card_components(card, component) {
1624 if (!strcmp(component->name, byt_rt5640_codec_name)) {
1625 dev_dbg(component->dev, "disabling jack detect before suspend\n");
1626 snd_soc_component_set_jack(component, NULL, NULL);
1627 break;
1628 }
1629 }
1630
1631 return 0;
1632}
1633
1634static int byt_rt5640_resume(struct snd_soc_card *card)
1635{
1636 struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card);
1637 struct snd_soc_component *component;
1638
1639 if (!BYT_RT5640_JDSRC(byt_rt5640_quirk))
1640 return 0;
1641
1642 for_each_card_components(card, component) {
1643 if (!strcmp(component->name, byt_rt5640_codec_name)) {
1644 dev_dbg(component->dev, "re-enabling jack detect after resume\n");
1645 snd_soc_component_set_jack(component, &priv->jack,
1646 &priv->jack_data);
1647 break;
1648 }
1649 }
1650
1651 return 0;
1652}
1653
1654/* use space before codec name to simplify card ID, and simplify driver name */
1655#define SOF_CARD_NAME "bytcht rt5640" /* card name will be 'sof-bytcht rt5640' */
1656#define SOF_DRIVER_NAME "SOF"
1657
1658#define CARD_NAME "bytcr-rt5640"
1659#define DRIVER_NAME NULL /* card name will be used for driver name */
1660
1661static struct snd_soc_card byt_rt5640_card = {
1662 .owner = THIS_MODULE,
1663 .dai_link = byt_rt5640_dais,
1664 .num_links = ARRAY_SIZE(byt_rt5640_dais),
1665 .dapm_widgets = byt_rt5640_widgets,
1666 .num_dapm_widgets = ARRAY_SIZE(byt_rt5640_widgets),
1667 .dapm_routes = byt_rt5640_audio_map,
1668 .num_dapm_routes = ARRAY_SIZE(byt_rt5640_audio_map),
1669 .fully_routed = true,
1670 .suspend_pre = byt_rt5640_suspend,
1671 .resume_post = byt_rt5640_resume,
1672};
1673
1674struct acpi_chan_package { /* ACPICA seems to require 64 bit integers */
1675 u64 aif_value; /* 1: AIF1, 2: AIF2 */
1676 u64 mclock_value; /* usually 25MHz (0x17d7940), ignored */
1677};
1678
1679static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
1680{
1681 struct device *dev = &pdev->dev;
1682 static const char * const map_name[] = { "dmic1", "dmic2", "in1", "in3", "none" };
1683 struct snd_soc_acpi_mach *mach = dev_get_platdata(dev);
1684 __maybe_unused const char *spk_type;
1685 const struct dmi_system_id *dmi_id;
1686 const char *headset2_string = "";
1687 const char *lineout_string = "";
1688 struct byt_rt5640_private *priv;
1689 const char *platform_name;
1690 struct acpi_device *adev;
1691 struct device *codec_dev;
1692 const char *cfg_spk;
1693 bool sof_parent;
1694 int ret_val = 0;
1695 int dai_index = 0;
1696 int i, aif;
1697
1698 is_bytcr = false;
1699 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
1700 if (!priv)
1701 return -ENOMEM;
1702
1703 /* register the soc card */
1704 byt_rt5640_card.dev = dev;
1705 snd_soc_card_set_drvdata(&byt_rt5640_card, priv);
1706
1707 /* fix index of codec dai */
1708 for (i = 0; i < ARRAY_SIZE(byt_rt5640_dais); i++) {
1709 if (byt_rt5640_dais[i].num_codecs &&
1710 !strcmp(byt_rt5640_dais[i].codecs->name,
1711 "i2c-10EC5640:00")) {
1712 dai_index = i;
1713 break;
1714 }
1715 }
1716
1717 /* fixup codec name based on HID */
1718 adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1);
1719 if (adev) {
1720 snprintf(byt_rt5640_codec_name, sizeof(byt_rt5640_codec_name),
1721 "i2c-%s", acpi_dev_name(adev));
1722 byt_rt5640_dais[dai_index].codecs->name = byt_rt5640_codec_name;
1723 } else {
1724 dev_err(dev, "Error cannot find '%s' dev\n", mach->id);
1725 return -ENOENT;
1726 }
1727
1728 codec_dev = acpi_get_first_physical_node(adev);
1729 acpi_dev_put(adev);
1730
1731 if (codec_dev) {
1732 priv->codec_dev = get_device(codec_dev);
1733 } else {
1734 /*
1735 * Special case for Android tablets where the codec i2c_client
1736 * has been manually instantiated by x86_android_tablets.ko due
1737 * to a broken DSDT.
1738 */
1739 codec_dev = bus_find_device_by_name(&i2c_bus_type, NULL,
1740 BYT_RT5640_FALLBACK_CODEC_DEV_NAME);
1741 if (!codec_dev)
1742 return -EPROBE_DEFER;
1743
1744 if (!i2c_verify_client(codec_dev)) {
1745 dev_err(dev, "Error '%s' is not an i2c_client\n",
1746 BYT_RT5640_FALLBACK_CODEC_DEV_NAME);
1747 put_device(codec_dev);
1748 }
1749
1750 /* fixup codec name */
1751 strscpy(byt_rt5640_codec_name, BYT_RT5640_FALLBACK_CODEC_DEV_NAME,
1752 sizeof(byt_rt5640_codec_name));
1753
1754 /* bus_find_device() returns a reference no need to get() */
1755 priv->codec_dev = codec_dev;
1756 }
1757
1758 /*
1759 * swap SSP0 if bytcr is detected
1760 * (will be overridden if DMI quirk is detected)
1761 */
1762 if (soc_intel_is_byt()) {
1763 if (mach->mach_params.acpi_ipc_irq_index == 0)
1764 is_bytcr = true;
1765 }
1766
1767 if (is_bytcr) {
1768 /*
1769 * Baytrail CR platforms may have CHAN package in BIOS, try
1770 * to find relevant routing quirk based as done on Windows
1771 * platforms. We have to read the information directly from the
1772 * BIOS, at this stage the card is not created and the links
1773 * with the codec driver/pdata are non-existent
1774 */
1775
1776 struct acpi_chan_package chan_package = { 0 };
1777
1778 /* format specified: 2 64-bit integers */
1779 struct acpi_buffer format = {sizeof("NN"), "NN"};
1780 struct acpi_buffer state = {0, NULL};
1781 struct snd_soc_acpi_package_context pkg_ctx;
1782 bool pkg_found = false;
1783
1784 state.length = sizeof(chan_package);
1785 state.pointer = &chan_package;
1786
1787 pkg_ctx.name = "CHAN";
1788 pkg_ctx.length = 2;
1789 pkg_ctx.format = &format;
1790 pkg_ctx.state = &state;
1791 pkg_ctx.data_valid = false;
1792
1793 pkg_found = snd_soc_acpi_find_package_from_hid(mach->id,
1794 &pkg_ctx);
1795 if (pkg_found) {
1796 if (chan_package.aif_value == 1) {
1797 dev_info(dev, "BIOS Routing: AIF1 connected\n");
1798 byt_rt5640_quirk |= BYT_RT5640_SSP0_AIF1;
1799 } else if (chan_package.aif_value == 2) {
1800 dev_info(dev, "BIOS Routing: AIF2 connected\n");
1801 byt_rt5640_quirk |= BYT_RT5640_SSP0_AIF2;
1802 } else {
1803 dev_info(dev, "BIOS Routing isn't valid, ignored\n");
1804 pkg_found = false;
1805 }
1806 }
1807
1808 if (!pkg_found) {
1809 /* no BIOS indications, assume SSP0-AIF2 connection */
1810 byt_rt5640_quirk |= BYT_RT5640_SSP0_AIF2;
1811 }
1812
1813 /* change defaults for Baytrail-CR capture */
1814 byt_rt5640_quirk |= BYTCR_INPUT_DEFAULTS;
1815 } else {
1816 byt_rt5640_quirk |= BYT_RT5640_DMIC1_MAP |
1817 BYT_RT5640_JD_SRC_JD2_IN4N |
1818 BYT_RT5640_OVCD_TH_2000UA |
1819 BYT_RT5640_OVCD_SF_0P75;
1820 }
1821
1822 /* check quirks before creating card */
1823 dmi_id = dmi_first_match(byt_rt5640_quirk_table);
1824 if (dmi_id)
1825 byt_rt5640_quirk = (unsigned long)dmi_id->driver_data;
1826 if (quirk_override != -1) {
1827 dev_info(dev, "Overriding quirk 0x%lx => 0x%x\n",
1828 byt_rt5640_quirk, quirk_override);
1829 byt_rt5640_quirk = quirk_override;
1830 }
1831
1832 if (byt_rt5640_quirk & BYT_RT5640_JD_HP_ELITEP_1000G2) {
1833 acpi_dev_add_driver_gpios(ACPI_COMPANION(priv->codec_dev),
1834 byt_rt5640_hp_elitepad_1000g2_gpios);
1835
1836 priv->hsmic_detect = devm_fwnode_gpiod_get(dev, codec_dev->fwnode,
1837 "headset-mic-detect", GPIOD_IN,
1838 "headset-mic-detect");
1839 if (IS_ERR(priv->hsmic_detect)) {
1840 ret_val = dev_err_probe(dev, PTR_ERR(priv->hsmic_detect),
1841 "getting hsmic-detect GPIO\n");
1842 goto err_device;
1843 }
1844 }
1845
1846 /* Must be called before register_card, also see declaration comment. */
1847 ret_val = byt_rt5640_add_codec_device_props(codec_dev, priv);
1848 if (ret_val)
1849 goto err_remove_gpios;
1850
1851 log_quirks(dev);
1852
1853 if ((byt_rt5640_quirk & BYT_RT5640_SSP2_AIF2) ||
1854 (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF2)) {
1855 byt_rt5640_dais[dai_index].codecs->dai_name = "rt5640-aif2";
1856 aif = 2;
1857 } else {
1858 aif = 1;
1859 }
1860
1861 if ((byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) ||
1862 (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF2))
1863 byt_rt5640_dais[dai_index].cpus->dai_name = "ssp0-port";
1864
1865 if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) {
1866 priv->mclk = devm_clk_get_optional(dev, "pmc_plt_clk_3");
1867 if (IS_ERR(priv->mclk)) {
1868 ret_val = dev_err_probe(dev, PTR_ERR(priv->mclk),
1869 "Failed to get MCLK from pmc_plt_clk_3\n");
1870 goto err;
1871 }
1872 /*
1873 * Fall back to bit clock usage when clock is not
1874 * available likely due to missing dependencies.
1875 */
1876 if (!priv->mclk)
1877 byt_rt5640_quirk &= ~BYT_RT5640_MCLK_EN;
1878 }
1879
1880 if (byt_rt5640_quirk & BYT_RT5640_NO_SPEAKERS) {
1881 cfg_spk = "0";
1882 spk_type = "none";
1883 } else if (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) {
1884 cfg_spk = "1";
1885 spk_type = "mono";
1886 } else if (byt_rt5640_quirk & BYT_RT5640_SWAPPED_SPEAKERS) {
1887 cfg_spk = "swapped";
1888 spk_type = "swapped";
1889 } else {
1890 cfg_spk = "2";
1891 spk_type = "stereo";
1892 }
1893
1894 if (byt_rt5640_quirk & BYT_RT5640_LINEOUT) {
1895 if (byt_rt5640_quirk & BYT_RT5640_LINEOUT_AS_HP2)
1896 lineout_string = " cfg-hp2:lineout";
1897 else
1898 lineout_string = " cfg-lineout:2";
1899 }
1900
1901 if (byt_rt5640_quirk & BYT_RT5640_HSMIC2_ON_IN1)
1902 headset2_string = " cfg-hs2:in1";
1903
1904 snprintf(byt_rt5640_components, sizeof(byt_rt5640_components),
1905 "cfg-spk:%s cfg-mic:%s aif:%d%s%s", cfg_spk,
1906 map_name[BYT_RT5640_MAP(byt_rt5640_quirk)], aif,
1907 lineout_string, headset2_string);
1908 byt_rt5640_card.components = byt_rt5640_components;
1909#if !IS_ENABLED(CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES)
1910 snprintf(byt_rt5640_long_name, sizeof(byt_rt5640_long_name),
1911 "bytcr-rt5640-%s-spk-%s-mic", spk_type,
1912 map_name[BYT_RT5640_MAP(byt_rt5640_quirk)]);
1913 byt_rt5640_card.long_name = byt_rt5640_long_name;
1914#endif
1915
1916 /* override platform name, if required */
1917 platform_name = mach->mach_params.platform;
1918
1919 ret_val = snd_soc_fixup_dai_links_platform_name(&byt_rt5640_card,
1920 platform_name);
1921 if (ret_val)
1922 goto err;
1923
1924 sof_parent = snd_soc_acpi_sof_parent(dev);
1925
1926 /* set card and driver name */
1927 if (sof_parent) {
1928 byt_rt5640_card.name = SOF_CARD_NAME;
1929 byt_rt5640_card.driver_name = SOF_DRIVER_NAME;
1930 } else {
1931 byt_rt5640_card.name = CARD_NAME;
1932 byt_rt5640_card.driver_name = DRIVER_NAME;
1933 }
1934
1935 /* set pm ops */
1936 if (sof_parent)
1937 dev->driver->pm = &snd_soc_pm_ops;
1938
1939 ret_val = devm_snd_soc_register_card(dev, &byt_rt5640_card);
1940 if (ret_val) {
1941 dev_err(dev, "devm_snd_soc_register_card failed %d\n", ret_val);
1942 goto err;
1943 }
1944 platform_set_drvdata(pdev, &byt_rt5640_card);
1945 return ret_val;
1946
1947err:
1948 device_remove_software_node(priv->codec_dev);
1949err_remove_gpios:
1950 if (byt_rt5640_quirk & BYT_RT5640_JD_HP_ELITEP_1000G2)
1951 acpi_dev_remove_driver_gpios(ACPI_COMPANION(priv->codec_dev));
1952err_device:
1953 put_device(priv->codec_dev);
1954 return ret_val;
1955}
1956
1957static void snd_byt_rt5640_mc_remove(struct platform_device *pdev)
1958{
1959 struct snd_soc_card *card = platform_get_drvdata(pdev);
1960 struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card);
1961
1962 if (byt_rt5640_quirk & BYT_RT5640_JD_HP_ELITEP_1000G2)
1963 acpi_dev_remove_driver_gpios(ACPI_COMPANION(priv->codec_dev));
1964
1965 device_remove_software_node(priv->codec_dev);
1966 put_device(priv->codec_dev);
1967}
1968
1969static struct platform_driver snd_byt_rt5640_mc_driver = {
1970 .driver = {
1971 .name = "bytcr_rt5640",
1972 },
1973 .probe = snd_byt_rt5640_mc_probe,
1974 .remove = snd_byt_rt5640_mc_remove,
1975};
1976
1977module_platform_driver(snd_byt_rt5640_mc_driver);
1978
1979MODULE_DESCRIPTION("ASoC Intel(R) Baytrail CR Machine driver");
1980MODULE_AUTHOR("Subhransu S. Prusty <subhransu.s.prusty@intel.com>");
1981MODULE_LICENSE("GPL v2");
1982MODULE_ALIAS("platform:bytcr_rt5640");
1/*
2 * byt_cr_dpcm_rt5640.c - ASoc Machine driver for Intel Byt CR platform
3 *
4 * Copyright (C) 2014 Intel Corp
5 * Author: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
6 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; version 2 of the License.
11 *
12 * This program is distributed in the hope that it will be useful, but
13 * WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * General Public License for more details.
16 *
17 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
18 */
19
20#include <linux/init.h>
21#include <linux/module.h>
22#include <linux/platform_device.h>
23#include <linux/acpi.h>
24#include <linux/device.h>
25#include <linux/dmi.h>
26#include <linux/slab.h>
27#include <asm/cpu_device_id.h>
28#include <asm/platform_sst_audio.h>
29#include <linux/clk.h>
30#include <sound/pcm.h>
31#include <sound/pcm_params.h>
32#include <sound/soc.h>
33#include <sound/jack.h>
34#include "../../codecs/rt5640.h"
35#include "../atom/sst-atom-controls.h"
36#include "../common/sst-acpi.h"
37#include "../common/sst-dsp.h"
38
39enum {
40 BYT_RT5640_DMIC1_MAP,
41 BYT_RT5640_DMIC2_MAP,
42 BYT_RT5640_IN1_MAP,
43 BYT_RT5640_IN3_MAP,
44};
45
46#define BYT_RT5640_MAP(quirk) ((quirk) & 0xff)
47#define BYT_RT5640_DMIC_EN BIT(16)
48#define BYT_RT5640_MONO_SPEAKER BIT(17)
49#define BYT_RT5640_DIFF_MIC BIT(18) /* defaut is single-ended */
50#define BYT_RT5640_SSP2_AIF2 BIT(19) /* default is using AIF1 */
51#define BYT_RT5640_SSP0_AIF1 BIT(20)
52#define BYT_RT5640_SSP0_AIF2 BIT(21)
53#define BYT_RT5640_MCLK_EN BIT(22)
54#define BYT_RT5640_MCLK_25MHZ BIT(23)
55
56struct byt_rt5640_private {
57 struct clk *mclk;
58};
59
60static unsigned long byt_rt5640_quirk = BYT_RT5640_MCLK_EN;
61
62static void log_quirks(struct device *dev)
63{
64 if (BYT_RT5640_MAP(byt_rt5640_quirk) == BYT_RT5640_DMIC1_MAP)
65 dev_info(dev, "quirk DMIC1_MAP enabled");
66 if (BYT_RT5640_MAP(byt_rt5640_quirk) == BYT_RT5640_DMIC2_MAP)
67 dev_info(dev, "quirk DMIC2_MAP enabled");
68 if (BYT_RT5640_MAP(byt_rt5640_quirk) == BYT_RT5640_IN1_MAP)
69 dev_info(dev, "quirk IN1_MAP enabled");
70 if (BYT_RT5640_MAP(byt_rt5640_quirk) == BYT_RT5640_IN3_MAP)
71 dev_info(dev, "quirk IN3_MAP enabled");
72 if (byt_rt5640_quirk & BYT_RT5640_DMIC_EN)
73 dev_info(dev, "quirk DMIC enabled");
74 if (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER)
75 dev_info(dev, "quirk MONO_SPEAKER enabled");
76 if (byt_rt5640_quirk & BYT_RT5640_DIFF_MIC)
77 dev_info(dev, "quirk DIFF_MIC enabled");
78 if (byt_rt5640_quirk & BYT_RT5640_SSP2_AIF2)
79 dev_info(dev, "quirk SSP2_AIF2 enabled");
80 if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1)
81 dev_info(dev, "quirk SSP0_AIF1 enabled");
82 if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF2)
83 dev_info(dev, "quirk SSP0_AIF2 enabled");
84 if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN)
85 dev_info(dev, "quirk MCLK_EN enabled");
86 if (byt_rt5640_quirk & BYT_RT5640_MCLK_25MHZ)
87 dev_info(dev, "quirk MCLK_25MHZ enabled");
88}
89
90
91#define BYT_CODEC_DAI1 "rt5640-aif1"
92#define BYT_CODEC_DAI2 "rt5640-aif2"
93
94static inline struct snd_soc_dai *byt_get_codec_dai(struct snd_soc_card *card)
95{
96 struct snd_soc_pcm_runtime *rtd;
97
98 list_for_each_entry(rtd, &card->rtd_list, list) {
99 if (!strncmp(rtd->codec_dai->name, BYT_CODEC_DAI1,
100 strlen(BYT_CODEC_DAI1)))
101 return rtd->codec_dai;
102 if (!strncmp(rtd->codec_dai->name, BYT_CODEC_DAI2,
103 strlen(BYT_CODEC_DAI2)))
104 return rtd->codec_dai;
105
106 }
107 return NULL;
108}
109
110static int platform_clock_control(struct snd_soc_dapm_widget *w,
111 struct snd_kcontrol *k, int event)
112{
113 struct snd_soc_dapm_context *dapm = w->dapm;
114 struct snd_soc_card *card = dapm->card;
115 struct snd_soc_dai *codec_dai;
116 struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card);
117 int ret;
118
119 codec_dai = byt_get_codec_dai(card);
120 if (!codec_dai) {
121 dev_err(card->dev,
122 "Codec dai not found; Unable to set platform clock\n");
123 return -EIO;
124 }
125
126 if (SND_SOC_DAPM_EVENT_ON(event)) {
127 if ((byt_rt5640_quirk & BYT_RT5640_MCLK_EN) && priv->mclk) {
128 ret = clk_prepare_enable(priv->mclk);
129 if (ret < 0) {
130 dev_err(card->dev,
131 "could not configure MCLK state");
132 return ret;
133 }
134 }
135 ret = snd_soc_dai_set_sysclk(codec_dai, RT5640_SCLK_S_PLL1,
136 48000 * 512,
137 SND_SOC_CLOCK_IN);
138 } else {
139 /*
140 * Set codec clock source to internal clock before
141 * turning off the platform clock. Codec needs clock
142 * for Jack detection and button press
143 */
144 ret = snd_soc_dai_set_sysclk(codec_dai, RT5640_SCLK_S_RCCLK,
145 48000 * 512,
146 SND_SOC_CLOCK_IN);
147 if (!ret) {
148 if ((byt_rt5640_quirk & BYT_RT5640_MCLK_EN) && priv->mclk)
149 clk_disable_unprepare(priv->mclk);
150 }
151 }
152
153 if (ret < 0) {
154 dev_err(card->dev, "can't set codec sysclk: %d\n", ret);
155 return ret;
156 }
157
158 return 0;
159}
160
161static const struct snd_soc_dapm_widget byt_rt5640_widgets[] = {
162 SND_SOC_DAPM_HP("Headphone", NULL),
163 SND_SOC_DAPM_MIC("Headset Mic", NULL),
164 SND_SOC_DAPM_MIC("Internal Mic", NULL),
165 SND_SOC_DAPM_SPK("Speaker", NULL),
166 SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0,
167 platform_clock_control, SND_SOC_DAPM_PRE_PMU |
168 SND_SOC_DAPM_POST_PMD),
169
170};
171
172static const struct snd_soc_dapm_route byt_rt5640_audio_map[] = {
173 {"Headphone", NULL, "Platform Clock"},
174 {"Headset Mic", NULL, "Platform Clock"},
175 {"Internal Mic", NULL, "Platform Clock"},
176 {"Speaker", NULL, "Platform Clock"},
177
178 {"Headset Mic", NULL, "MICBIAS1"},
179 {"IN2P", NULL, "Headset Mic"},
180 {"Headphone", NULL, "HPOL"},
181 {"Headphone", NULL, "HPOR"},
182};
183
184static const struct snd_soc_dapm_route byt_rt5640_intmic_dmic1_map[] = {
185 {"DMIC1", NULL, "Internal Mic"},
186};
187
188static const struct snd_soc_dapm_route byt_rt5640_intmic_dmic2_map[] = {
189 {"DMIC2", NULL, "Internal Mic"},
190};
191
192static const struct snd_soc_dapm_route byt_rt5640_intmic_in1_map[] = {
193 {"Internal Mic", NULL, "MICBIAS1"},
194 {"IN1P", NULL, "Internal Mic"},
195};
196
197static const struct snd_soc_dapm_route byt_rt5640_intmic_in3_map[] = {
198 {"Internal Mic", NULL, "MICBIAS1"},
199 {"IN3P", NULL, "Internal Mic"},
200};
201
202static const struct snd_soc_dapm_route byt_rt5640_ssp2_aif1_map[] = {
203 {"ssp2 Tx", NULL, "codec_out0"},
204 {"ssp2 Tx", NULL, "codec_out1"},
205 {"codec_in0", NULL, "ssp2 Rx"},
206 {"codec_in1", NULL, "ssp2 Rx"},
207
208 {"AIF1 Playback", NULL, "ssp2 Tx"},
209 {"ssp2 Rx", NULL, "AIF1 Capture"},
210};
211
212static const struct snd_soc_dapm_route byt_rt5640_ssp2_aif2_map[] = {
213 {"ssp2 Tx", NULL, "codec_out0"},
214 {"ssp2 Tx", NULL, "codec_out1"},
215 {"codec_in0", NULL, "ssp2 Rx"},
216 {"codec_in1", NULL, "ssp2 Rx"},
217
218 {"AIF2 Playback", NULL, "ssp2 Tx"},
219 {"ssp2 Rx", NULL, "AIF2 Capture"},
220};
221
222static const struct snd_soc_dapm_route byt_rt5640_ssp0_aif1_map[] = {
223 {"ssp0 Tx", NULL, "modem_out"},
224 {"modem_in", NULL, "ssp0 Rx"},
225
226 {"AIF1 Playback", NULL, "ssp0 Tx"},
227 {"ssp0 Rx", NULL, "AIF1 Capture"},
228};
229
230static const struct snd_soc_dapm_route byt_rt5640_ssp0_aif2_map[] = {
231 {"ssp0 Tx", NULL, "modem_out"},
232 {"modem_in", NULL, "ssp0 Rx"},
233
234 {"AIF2 Playback", NULL, "ssp0 Tx"},
235 {"ssp0 Rx", NULL, "AIF2 Capture"},
236};
237
238static const struct snd_soc_dapm_route byt_rt5640_stereo_spk_map[] = {
239 {"Speaker", NULL, "SPOLP"},
240 {"Speaker", NULL, "SPOLN"},
241 {"Speaker", NULL, "SPORP"},
242 {"Speaker", NULL, "SPORN"},
243};
244
245static const struct snd_soc_dapm_route byt_rt5640_mono_spk_map[] = {
246 {"Speaker", NULL, "SPOLP"},
247 {"Speaker", NULL, "SPOLN"},
248};
249
250static const struct snd_kcontrol_new byt_rt5640_controls[] = {
251 SOC_DAPM_PIN_SWITCH("Headphone"),
252 SOC_DAPM_PIN_SWITCH("Headset Mic"),
253 SOC_DAPM_PIN_SWITCH("Internal Mic"),
254 SOC_DAPM_PIN_SWITCH("Speaker"),
255};
256
257static int byt_rt5640_aif1_hw_params(struct snd_pcm_substream *substream,
258 struct snd_pcm_hw_params *params)
259{
260 struct snd_soc_pcm_runtime *rtd = substream->private_data;
261 struct snd_soc_dai *codec_dai = rtd->codec_dai;
262 int ret;
263
264 ret = snd_soc_dai_set_sysclk(codec_dai, RT5640_SCLK_S_PLL1,
265 params_rate(params) * 512,
266 SND_SOC_CLOCK_IN);
267
268 if (ret < 0) {
269 dev_err(rtd->dev, "can't set codec clock %d\n", ret);
270 return ret;
271 }
272
273 if (!(byt_rt5640_quirk & BYT_RT5640_MCLK_EN)) {
274 /* use bitclock as PLL input */
275 if ((byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) ||
276 (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF2)) {
277
278 /* 2x16 bit slots on SSP0 */
279 ret = snd_soc_dai_set_pll(codec_dai, 0,
280 RT5640_PLL1_S_BCLK1,
281 params_rate(params) * 32,
282 params_rate(params) * 512);
283 } else {
284 /* 2x15 bit slots on SSP2 */
285 ret = snd_soc_dai_set_pll(codec_dai, 0,
286 RT5640_PLL1_S_BCLK1,
287 params_rate(params) * 50,
288 params_rate(params) * 512);
289 }
290 } else {
291 if (byt_rt5640_quirk & BYT_RT5640_MCLK_25MHZ) {
292 ret = snd_soc_dai_set_pll(codec_dai, 0,
293 RT5640_PLL1_S_MCLK,
294 25000000,
295 params_rate(params) * 512);
296 } else {
297 ret = snd_soc_dai_set_pll(codec_dai, 0,
298 RT5640_PLL1_S_MCLK,
299 19200000,
300 params_rate(params) * 512);
301 }
302 }
303
304 if (ret < 0) {
305 dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
306 return ret;
307 }
308
309 return 0;
310}
311
312static int byt_rt5640_quirk_cb(const struct dmi_system_id *id)
313{
314 byt_rt5640_quirk = (unsigned long)id->driver_data;
315 return 1;
316}
317
318static const struct dmi_system_id byt_rt5640_quirk_table[] = {
319 {
320 .callback = byt_rt5640_quirk_cb,
321 .matches = {
322 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
323 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TA"),
324 },
325 .driver_data = (unsigned long *)(BYT_RT5640_IN1_MAP |
326 BYT_RT5640_MCLK_EN),
327 },
328 {
329 .callback = byt_rt5640_quirk_cb,
330 .matches = {
331 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
332 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TAF"),
333 },
334 .driver_data = (unsigned long *)(BYT_RT5640_IN1_MAP |
335 BYT_RT5640_MONO_SPEAKER |
336 BYT_RT5640_DIFF_MIC |
337 BYT_RT5640_SSP0_AIF2 |
338 BYT_RT5640_MCLK_EN
339 ),
340 },
341 {
342 .callback = byt_rt5640_quirk_cb,
343 .matches = {
344 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "DellInc."),
345 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Venue 8 Pro 5830"),
346 },
347 .driver_data = (unsigned long *)(BYT_RT5640_DMIC2_MAP |
348 BYT_RT5640_DMIC_EN |
349 BYT_RT5640_MCLK_EN),
350 },
351 {
352 .callback = byt_rt5640_quirk_cb,
353 .matches = {
354 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
355 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HP ElitePad 1000 G2"),
356 },
357 .driver_data = (unsigned long *)(BYT_RT5640_IN1_MAP |
358 BYT_RT5640_MCLK_EN),
359 },
360 {
361 .callback = byt_rt5640_quirk_cb,
362 .matches = {
363 DMI_MATCH(DMI_SYS_VENDOR, "Circuitco"),
364 DMI_MATCH(DMI_PRODUCT_NAME, "Minnowboard Max B3 PLATFORM"),
365 },
366 .driver_data = (unsigned long *)(BYT_RT5640_DMIC1_MAP |
367 BYT_RT5640_DMIC_EN),
368 },
369 {
370 .callback = byt_rt5640_quirk_cb,
371 .matches = {
372 DMI_MATCH(DMI_BOARD_VENDOR, "TECLAST"),
373 DMI_MATCH(DMI_BOARD_NAME, "tPAD"),
374 },
375 .driver_data = (unsigned long *)(BYT_RT5640_IN3_MAP |
376 BYT_RT5640_MCLK_EN |
377 BYT_RT5640_SSP0_AIF1),
378 },
379 {
380 .callback = byt_rt5640_quirk_cb,
381 .matches = {
382 DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
383 DMI_MATCH(DMI_PRODUCT_NAME, "Aspire SW5-012"),
384 },
385 .driver_data = (unsigned long *)(BYT_RT5640_IN1_MAP |
386 BYT_RT5640_MCLK_EN |
387 BYT_RT5640_SSP0_AIF1),
388
389 },
390 {
391 .callback = byt_rt5640_quirk_cb,
392 .matches = {
393 DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
394 },
395 .driver_data = (unsigned long *)(BYT_RT5640_IN3_MAP |
396 BYT_RT5640_MCLK_EN |
397 BYT_RT5640_SSP0_AIF1),
398
399 },
400 {}
401};
402
403static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime)
404{
405 int ret;
406 struct snd_soc_codec *codec = runtime->codec;
407 struct snd_soc_card *card = runtime->card;
408 const struct snd_soc_dapm_route *custom_map;
409 struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card);
410 int num_routes;
411
412 card->dapm.idle_bias_off = true;
413
414 rt5640_sel_asrc_clk_src(codec,
415 RT5640_DA_STEREO_FILTER |
416 RT5640_DA_MONO_L_FILTER |
417 RT5640_DA_MONO_R_FILTER |
418 RT5640_AD_STEREO_FILTER |
419 RT5640_AD_MONO_L_FILTER |
420 RT5640_AD_MONO_R_FILTER,
421 RT5640_CLK_SEL_ASRC);
422
423 ret = snd_soc_add_card_controls(card, byt_rt5640_controls,
424 ARRAY_SIZE(byt_rt5640_controls));
425 if (ret) {
426 dev_err(card->dev, "unable to add card controls\n");
427 return ret;
428 }
429
430 switch (BYT_RT5640_MAP(byt_rt5640_quirk)) {
431 case BYT_RT5640_IN1_MAP:
432 custom_map = byt_rt5640_intmic_in1_map;
433 num_routes = ARRAY_SIZE(byt_rt5640_intmic_in1_map);
434 break;
435 case BYT_RT5640_IN3_MAP:
436 custom_map = byt_rt5640_intmic_in3_map;
437 num_routes = ARRAY_SIZE(byt_rt5640_intmic_in3_map);
438 break;
439 case BYT_RT5640_DMIC2_MAP:
440 custom_map = byt_rt5640_intmic_dmic2_map;
441 num_routes = ARRAY_SIZE(byt_rt5640_intmic_dmic2_map);
442 break;
443 default:
444 custom_map = byt_rt5640_intmic_dmic1_map;
445 num_routes = ARRAY_SIZE(byt_rt5640_intmic_dmic1_map);
446 }
447
448 ret = snd_soc_dapm_add_routes(&card->dapm, custom_map, num_routes);
449 if (ret)
450 return ret;
451
452 if (byt_rt5640_quirk & BYT_RT5640_SSP2_AIF2) {
453 ret = snd_soc_dapm_add_routes(&card->dapm,
454 byt_rt5640_ssp2_aif2_map,
455 ARRAY_SIZE(byt_rt5640_ssp2_aif2_map));
456 } else if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) {
457 ret = snd_soc_dapm_add_routes(&card->dapm,
458 byt_rt5640_ssp0_aif1_map,
459 ARRAY_SIZE(byt_rt5640_ssp0_aif1_map));
460 } else if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF2) {
461 ret = snd_soc_dapm_add_routes(&card->dapm,
462 byt_rt5640_ssp0_aif2_map,
463 ARRAY_SIZE(byt_rt5640_ssp0_aif2_map));
464 } else {
465 ret = snd_soc_dapm_add_routes(&card->dapm,
466 byt_rt5640_ssp2_aif1_map,
467 ARRAY_SIZE(byt_rt5640_ssp2_aif1_map));
468 }
469 if (ret)
470 return ret;
471
472 if (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) {
473 ret = snd_soc_dapm_add_routes(&card->dapm,
474 byt_rt5640_mono_spk_map,
475 ARRAY_SIZE(byt_rt5640_mono_spk_map));
476 } else {
477 ret = snd_soc_dapm_add_routes(&card->dapm,
478 byt_rt5640_stereo_spk_map,
479 ARRAY_SIZE(byt_rt5640_stereo_spk_map));
480 }
481 if (ret)
482 return ret;
483
484 if (byt_rt5640_quirk & BYT_RT5640_DIFF_MIC) {
485 snd_soc_update_bits(codec, RT5640_IN1_IN2, RT5640_IN_DF1,
486 RT5640_IN_DF1);
487 }
488
489 if (byt_rt5640_quirk & BYT_RT5640_DMIC_EN) {
490 ret = rt5640_dmic_enable(codec, 0, 0);
491 if (ret)
492 return ret;
493 }
494
495 snd_soc_dapm_ignore_suspend(&card->dapm, "Headphone");
496 snd_soc_dapm_ignore_suspend(&card->dapm, "Speaker");
497
498 if ((byt_rt5640_quirk & BYT_RT5640_MCLK_EN) && priv->mclk) {
499 /*
500 * The firmware might enable the clock at
501 * boot (this information may or may not
502 * be reflected in the enable clock register).
503 * To change the rate we must disable the clock
504 * first to cover these cases. Due to common
505 * clock framework restrictions that do not allow
506 * to disable a clock that has not been enabled,
507 * we need to enable the clock first.
508 */
509 ret = clk_prepare_enable(priv->mclk);
510 if (!ret)
511 clk_disable_unprepare(priv->mclk);
512
513 if (byt_rt5640_quirk & BYT_RT5640_MCLK_25MHZ)
514 ret = clk_set_rate(priv->mclk, 25000000);
515 else
516 ret = clk_set_rate(priv->mclk, 19200000);
517
518 if (ret)
519 dev_err(card->dev, "unable to set MCLK rate\n");
520 }
521
522 return ret;
523}
524
525static const struct snd_soc_pcm_stream byt_rt5640_dai_params = {
526 .formats = SNDRV_PCM_FMTBIT_S24_LE,
527 .rate_min = 48000,
528 .rate_max = 48000,
529 .channels_min = 2,
530 .channels_max = 2,
531};
532
533static int byt_rt5640_codec_fixup(struct snd_soc_pcm_runtime *rtd,
534 struct snd_pcm_hw_params *params)
535{
536 struct snd_interval *rate = hw_param_interval(params,
537 SNDRV_PCM_HW_PARAM_RATE);
538 struct snd_interval *channels = hw_param_interval(params,
539 SNDRV_PCM_HW_PARAM_CHANNELS);
540 int ret;
541
542 /* The DSP will covert the FE rate to 48k, stereo */
543 rate->min = rate->max = 48000;
544 channels->min = channels->max = 2;
545
546 if ((byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) ||
547 (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF2)) {
548
549 /* set SSP0 to 16-bit */
550 params_set_format(params, SNDRV_PCM_FORMAT_S16_LE);
551
552 /*
553 * Default mode for SSP configuration is TDM 4 slot, override config
554 * with explicit setting to I2S 2ch 16-bit. The word length is set with
555 * dai_set_tdm_slot() since there is no other API exposed
556 */
557 ret = snd_soc_dai_set_fmt(rtd->cpu_dai,
558 SND_SOC_DAIFMT_I2S |
559 SND_SOC_DAIFMT_NB_IF |
560 SND_SOC_DAIFMT_CBS_CFS
561 );
562 if (ret < 0) {
563 dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret);
564 return ret;
565 }
566
567 ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, 16);
568 if (ret < 0) {
569 dev_err(rtd->dev, "can't set I2S config, err %d\n", ret);
570 return ret;
571 }
572
573 } else {
574
575 /* set SSP2 to 24-bit */
576 params_set_format(params, SNDRV_PCM_FORMAT_S24_LE);
577
578 /*
579 * Default mode for SSP configuration is TDM 4 slot, override config
580 * with explicit setting to I2S 2ch 24-bit. The word length is set with
581 * dai_set_tdm_slot() since there is no other API exposed
582 */
583 ret = snd_soc_dai_set_fmt(rtd->cpu_dai,
584 SND_SOC_DAIFMT_I2S |
585 SND_SOC_DAIFMT_NB_IF |
586 SND_SOC_DAIFMT_CBS_CFS
587 );
588 if (ret < 0) {
589 dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret);
590 return ret;
591 }
592
593 ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, 24);
594 if (ret < 0) {
595 dev_err(rtd->dev, "can't set I2S config, err %d\n", ret);
596 return ret;
597 }
598 }
599 return 0;
600}
601
602static int byt_rt5640_aif1_startup(struct snd_pcm_substream *substream)
603{
604 return snd_pcm_hw_constraint_single(substream->runtime,
605 SNDRV_PCM_HW_PARAM_RATE, 48000);
606}
607
608static const struct snd_soc_ops byt_rt5640_aif1_ops = {
609 .startup = byt_rt5640_aif1_startup,
610};
611
612static const struct snd_soc_ops byt_rt5640_be_ssp2_ops = {
613 .hw_params = byt_rt5640_aif1_hw_params,
614};
615
616static struct snd_soc_dai_link byt_rt5640_dais[] = {
617 [MERR_DPCM_AUDIO] = {
618 .name = "Baytrail Audio Port",
619 .stream_name = "Baytrail Audio",
620 .cpu_dai_name = "media-cpu-dai",
621 .codec_dai_name = "snd-soc-dummy-dai",
622 .codec_name = "snd-soc-dummy",
623 .platform_name = "sst-mfld-platform",
624 .ignore_suspend = 1,
625 .dynamic = 1,
626 .dpcm_playback = 1,
627 .dpcm_capture = 1,
628 .ops = &byt_rt5640_aif1_ops,
629 },
630 [MERR_DPCM_DEEP_BUFFER] = {
631 .name = "Deep-Buffer Audio Port",
632 .stream_name = "Deep-Buffer Audio",
633 .cpu_dai_name = "deepbuffer-cpu-dai",
634 .codec_dai_name = "snd-soc-dummy-dai",
635 .codec_name = "snd-soc-dummy",
636 .platform_name = "sst-mfld-platform",
637 .ignore_suspend = 1,
638 .nonatomic = true,
639 .dynamic = 1,
640 .dpcm_playback = 1,
641 .ops = &byt_rt5640_aif1_ops,
642 },
643 [MERR_DPCM_COMPR] = {
644 .name = "Baytrail Compressed Port",
645 .stream_name = "Baytrail Compress",
646 .cpu_dai_name = "compress-cpu-dai",
647 .codec_dai_name = "snd-soc-dummy-dai",
648 .codec_name = "snd-soc-dummy",
649 .platform_name = "sst-mfld-platform",
650 },
651 /* back ends */
652 {
653 .name = "SSP2-Codec",
654 .id = 1,
655 .cpu_dai_name = "ssp2-port", /* overwritten for ssp0 routing */
656 .platform_name = "sst-mfld-platform",
657 .no_pcm = 1,
658 .codec_dai_name = "rt5640-aif1", /* changed w/ quirk */
659 .codec_name = "i2c-10EC5640:00", /* overwritten with HID */
660 .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
661 | SND_SOC_DAIFMT_CBS_CFS,
662 .be_hw_params_fixup = byt_rt5640_codec_fixup,
663 .ignore_suspend = 1,
664 .dpcm_playback = 1,
665 .dpcm_capture = 1,
666 .init = byt_rt5640_init,
667 .ops = &byt_rt5640_be_ssp2_ops,
668 },
669};
670
671/* SoC card */
672static struct snd_soc_card byt_rt5640_card = {
673 .name = "bytcr-rt5640",
674 .owner = THIS_MODULE,
675 .dai_link = byt_rt5640_dais,
676 .num_links = ARRAY_SIZE(byt_rt5640_dais),
677 .dapm_widgets = byt_rt5640_widgets,
678 .num_dapm_widgets = ARRAY_SIZE(byt_rt5640_widgets),
679 .dapm_routes = byt_rt5640_audio_map,
680 .num_dapm_routes = ARRAY_SIZE(byt_rt5640_audio_map),
681 .fully_routed = true,
682};
683
684static char byt_rt5640_codec_name[16]; /* i2c-<HID>:00 with HID being 8 chars */
685static char byt_rt5640_codec_aif_name[12]; /* = "rt5640-aif[1|2]" */
686static char byt_rt5640_cpu_dai_name[10]; /* = "ssp[0|2]-port" */
687
688static bool is_valleyview(void)
689{
690 static const struct x86_cpu_id cpu_ids[] = {
691 { X86_VENDOR_INTEL, 6, 55 }, /* Valleyview, Bay Trail */
692 {}
693 };
694
695 if (!x86_match_cpu(cpu_ids))
696 return false;
697 return true;
698}
699
700struct acpi_chan_package { /* ACPICA seems to require 64 bit integers */
701 u64 aif_value; /* 1: AIF1, 2: AIF2 */
702 u64 mclock_value; /* usually 25MHz (0x17d7940), ignored */
703};
704
705static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
706{
707 int ret_val = 0;
708 struct sst_acpi_mach *mach;
709 const char *i2c_name = NULL;
710 int i;
711 int dai_index;
712 struct byt_rt5640_private *priv;
713 bool is_bytcr = false;
714
715 priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_ATOMIC);
716 if (!priv)
717 return -ENOMEM;
718
719 /* register the soc card */
720 byt_rt5640_card.dev = &pdev->dev;
721 mach = byt_rt5640_card.dev->platform_data;
722 snd_soc_card_set_drvdata(&byt_rt5640_card, priv);
723
724 /* fix index of codec dai */
725 dai_index = MERR_DPCM_COMPR + 1;
726 for (i = 0; i < ARRAY_SIZE(byt_rt5640_dais); i++) {
727 if (!strcmp(byt_rt5640_dais[i].codec_name, "i2c-10EC5640:00")) {
728 dai_index = i;
729 break;
730 }
731 }
732
733 /* fixup codec name based on HID */
734 i2c_name = sst_acpi_find_name_from_hid(mach->id);
735 if (i2c_name != NULL) {
736 snprintf(byt_rt5640_codec_name, sizeof(byt_rt5640_codec_name),
737 "%s%s", "i2c-", i2c_name);
738
739 byt_rt5640_dais[dai_index].codec_name = byt_rt5640_codec_name;
740 }
741
742 /*
743 * swap SSP0 if bytcr is detected
744 * (will be overridden if DMI quirk is detected)
745 */
746 if (is_valleyview()) {
747 struct sst_platform_info *p_info = mach->pdata;
748 const struct sst_res_info *res_info = p_info->res_info;
749
750 if (res_info->acpi_ipc_irq_index == 0)
751 is_bytcr = true;
752 }
753
754 if (is_bytcr) {
755 /*
756 * Baytrail CR platforms may have CHAN package in BIOS, try
757 * to find relevant routing quirk based as done on Windows
758 * platforms. We have to read the information directly from the
759 * BIOS, at this stage the card is not created and the links
760 * with the codec driver/pdata are non-existent
761 */
762
763 struct acpi_chan_package chan_package;
764
765 /* format specified: 2 64-bit integers */
766 struct acpi_buffer format = {sizeof("NN"), "NN"};
767 struct acpi_buffer state = {0, NULL};
768 struct sst_acpi_package_context pkg_ctx;
769 bool pkg_found = false;
770
771 state.length = sizeof(chan_package);
772 state.pointer = &chan_package;
773
774 pkg_ctx.name = "CHAN";
775 pkg_ctx.length = 2;
776 pkg_ctx.format = &format;
777 pkg_ctx.state = &state;
778 pkg_ctx.data_valid = false;
779
780 pkg_found = sst_acpi_find_package_from_hid(mach->id, &pkg_ctx);
781 if (pkg_found) {
782 if (chan_package.aif_value == 1) {
783 dev_info(&pdev->dev, "BIOS Routing: AIF1 connected\n");
784 byt_rt5640_quirk |= BYT_RT5640_SSP0_AIF1;
785 } else if (chan_package.aif_value == 2) {
786 dev_info(&pdev->dev, "BIOS Routing: AIF2 connected\n");
787 byt_rt5640_quirk |= BYT_RT5640_SSP0_AIF2;
788 } else {
789 dev_info(&pdev->dev, "BIOS Routing isn't valid, ignored\n");
790 pkg_found = false;
791 }
792 }
793
794 if (!pkg_found) {
795 /* no BIOS indications, assume SSP0-AIF2 connection */
796 byt_rt5640_quirk |= BYT_RT5640_SSP0_AIF2;
797 }
798
799 /* change defaults for Baytrail-CR capture */
800 byt_rt5640_quirk |= BYT_RT5640_IN1_MAP;
801 byt_rt5640_quirk |= BYT_RT5640_DIFF_MIC;
802 } else {
803 byt_rt5640_quirk |= (BYT_RT5640_DMIC1_MAP |
804 BYT_RT5640_DMIC_EN);
805 }
806
807 /* check quirks before creating card */
808 dmi_check_system(byt_rt5640_quirk_table);
809 log_quirks(&pdev->dev);
810
811 if ((byt_rt5640_quirk & BYT_RT5640_SSP2_AIF2) ||
812 (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF2)) {
813
814 /* fixup codec aif name */
815 snprintf(byt_rt5640_codec_aif_name,
816 sizeof(byt_rt5640_codec_aif_name),
817 "%s", "rt5640-aif2");
818
819 byt_rt5640_dais[dai_index].codec_dai_name =
820 byt_rt5640_codec_aif_name;
821 }
822
823 if ((byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) ||
824 (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF2)) {
825
826 /* fixup cpu dai name name */
827 snprintf(byt_rt5640_cpu_dai_name,
828 sizeof(byt_rt5640_cpu_dai_name),
829 "%s", "ssp0-port");
830
831 byt_rt5640_dais[dai_index].cpu_dai_name =
832 byt_rt5640_cpu_dai_name;
833 }
834
835 if ((byt_rt5640_quirk & BYT_RT5640_MCLK_EN) && (is_valleyview())) {
836 priv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3");
837 if (IS_ERR(priv->mclk)) {
838 ret_val = PTR_ERR(priv->mclk);
839
840 dev_err(&pdev->dev,
841 "Failed to get MCLK from pmc_plt_clk_3: %d\n",
842 ret_val);
843
844 /*
845 * Fall back to bit clock usage for -ENOENT (clock not
846 * available likely due to missing dependencies), bail
847 * for all other errors, including -EPROBE_DEFER
848 */
849 if (ret_val != -ENOENT)
850 return ret_val;
851 byt_rt5640_quirk &= ~BYT_RT5640_MCLK_EN;
852 }
853 }
854
855 ret_val = devm_snd_soc_register_card(&pdev->dev, &byt_rt5640_card);
856
857 if (ret_val) {
858 dev_err(&pdev->dev, "devm_snd_soc_register_card failed %d\n",
859 ret_val);
860 return ret_val;
861 }
862 platform_set_drvdata(pdev, &byt_rt5640_card);
863 return ret_val;
864}
865
866static struct platform_driver snd_byt_rt5640_mc_driver = {
867 .driver = {
868 .name = "bytcr_rt5640",
869 .pm = &snd_soc_pm_ops,
870 },
871 .probe = snd_byt_rt5640_mc_probe,
872};
873
874module_platform_driver(snd_byt_rt5640_mc_driver);
875
876MODULE_DESCRIPTION("ASoC Intel(R) Baytrail CR Machine driver");
877MODULE_AUTHOR("Subhransu S. Prusty <subhransu.s.prusty@intel.com>");
878MODULE_LICENSE("GPL v2");
879MODULE_ALIAS("platform:bytcr_rt5640");