Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * timbuart.c timberdale FPGA UART driver
4 * Copyright (c) 2009 Intel Corporation
5 */
6
7/* Supports:
8 * Timberdale FPGA UART
9 */
10
11#include <linux/pci.h>
12#include <linux/interrupt.h>
13#include <linux/serial_core.h>
14#include <linux/tty.h>
15#include <linux/tty_flip.h>
16#include <linux/kernel.h>
17#include <linux/platform_device.h>
18#include <linux/ioport.h>
19#include <linux/slab.h>
20#include <linux/module.h>
21
22#include "timbuart.h"
23
24struct timbuart_port {
25 struct uart_port port;
26 struct tasklet_struct tasklet;
27 int usedma;
28 u32 last_ier;
29 struct platform_device *dev;
30};
31
32static int baudrates[] = {9600, 19200, 38400, 57600, 115200, 230400, 460800,
33 921600, 1843200, 3250000};
34
35static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier);
36
37static irqreturn_t timbuart_handleinterrupt(int irq, void *devid);
38
39static void timbuart_stop_rx(struct uart_port *port)
40{
41 /* spin lock held by upper layer, disable all RX interrupts */
42 u32 ier = ioread32(port->membase + TIMBUART_IER) & ~RXFLAGS;
43 iowrite32(ier, port->membase + TIMBUART_IER);
44}
45
46static void timbuart_stop_tx(struct uart_port *port)
47{
48 /* spinlock held by upper layer, disable TX interrupt */
49 u32 ier = ioread32(port->membase + TIMBUART_IER) & ~TXBAE;
50 iowrite32(ier, port->membase + TIMBUART_IER);
51}
52
53static void timbuart_start_tx(struct uart_port *port)
54{
55 struct timbuart_port *uart =
56 container_of(port, struct timbuart_port, port);
57
58 /* do not transfer anything here -> fire off the tasklet */
59 tasklet_schedule(&uart->tasklet);
60}
61
62static unsigned int timbuart_tx_empty(struct uart_port *port)
63{
64 u32 isr = ioread32(port->membase + TIMBUART_ISR);
65
66 return (isr & TXBE) ? TIOCSER_TEMT : 0;
67}
68
69static void timbuart_flush_buffer(struct uart_port *port)
70{
71 if (!timbuart_tx_empty(port)) {
72 u8 ctl = ioread8(port->membase + TIMBUART_CTRL) |
73 TIMBUART_CTRL_FLSHTX;
74
75 iowrite8(ctl, port->membase + TIMBUART_CTRL);
76 iowrite32(TXBF, port->membase + TIMBUART_ISR);
77 }
78}
79
80static void timbuart_rx_chars(struct uart_port *port)
81{
82 struct tty_port *tport = &port->state->port;
83
84 while (ioread32(port->membase + TIMBUART_ISR) & RXDP) {
85 u8 ch = ioread8(port->membase + TIMBUART_RXFIFO);
86 port->icount.rx++;
87 tty_insert_flip_char(tport, ch, TTY_NORMAL);
88 }
89
90 tty_flip_buffer_push(tport);
91
92 dev_dbg(port->dev, "%s - total read %d bytes\n",
93 __func__, port->icount.rx);
94}
95
96static void timbuart_tx_chars(struct uart_port *port)
97{
98 unsigned char ch;
99
100 while (!(ioread32(port->membase + TIMBUART_ISR) & TXBF) &&
101 uart_fifo_get(port, &ch))
102 iowrite8(ch, port->membase + TIMBUART_TXFIFO);
103
104 dev_dbg(port->dev,
105 "%s - total written %d bytes, CTL: %x, RTS: %x, baud: %x\n",
106 __func__,
107 port->icount.tx,
108 ioread8(port->membase + TIMBUART_CTRL),
109 port->mctrl & TIOCM_RTS,
110 ioread8(port->membase + TIMBUART_BAUDRATE));
111}
112
113static void timbuart_handle_tx_port(struct uart_port *port, u32 isr, u32 *ier)
114{
115 struct timbuart_port *uart =
116 container_of(port, struct timbuart_port, port);
117 struct tty_port *tport = &port->state->port;
118
119 if (kfifo_is_empty(&tport->xmit_fifo) || uart_tx_stopped(port))
120 return;
121
122 if (port->x_char)
123 return;
124
125 if (isr & TXFLAGS) {
126 timbuart_tx_chars(port);
127 /* clear all TX interrupts */
128 iowrite32(TXFLAGS, port->membase + TIMBUART_ISR);
129
130 if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
131 uart_write_wakeup(port);
132 } else
133 /* Re-enable any tx interrupt */
134 *ier |= uart->last_ier & TXFLAGS;
135
136 /* enable interrupts if there are chars in the transmit buffer,
137 * Or if we delivered some bytes and want the almost empty interrupt
138 * we wake up the upper layer later when we got the interrupt
139 * to give it some time to go out...
140 */
141 if (!kfifo_is_empty(&tport->xmit_fifo))
142 *ier |= TXBAE;
143
144 dev_dbg(port->dev, "%s - leaving\n", __func__);
145}
146
147static void timbuart_handle_rx_port(struct uart_port *port, u32 isr, u32 *ier)
148{
149 if (isr & RXFLAGS) {
150 /* Some RX status is set */
151 if (isr & RXBF) {
152 u8 ctl = ioread8(port->membase + TIMBUART_CTRL) |
153 TIMBUART_CTRL_FLSHRX;
154 iowrite8(ctl, port->membase + TIMBUART_CTRL);
155 port->icount.overrun++;
156 } else if (isr & (RXDP))
157 timbuart_rx_chars(port);
158
159 /* ack all RX interrupts */
160 iowrite32(RXFLAGS, port->membase + TIMBUART_ISR);
161 }
162
163 /* always have the RX interrupts enabled */
164 *ier |= RXBAF | RXBF | RXTT;
165
166 dev_dbg(port->dev, "%s - leaving\n", __func__);
167}
168
169static void timbuart_tasklet(struct tasklet_struct *t)
170{
171 struct timbuart_port *uart = from_tasklet(uart, t, tasklet);
172 u32 isr, ier = 0;
173
174 uart_port_lock(&uart->port);
175
176 isr = ioread32(uart->port.membase + TIMBUART_ISR);
177 dev_dbg(uart->port.dev, "%s ISR: %x\n", __func__, isr);
178
179 if (!uart->usedma)
180 timbuart_handle_tx_port(&uart->port, isr, &ier);
181
182 timbuart_mctrl_check(&uart->port, isr, &ier);
183
184 if (!uart->usedma)
185 timbuart_handle_rx_port(&uart->port, isr, &ier);
186
187 iowrite32(ier, uart->port.membase + TIMBUART_IER);
188
189 uart_port_unlock(&uart->port);
190 dev_dbg(uart->port.dev, "%s leaving\n", __func__);
191}
192
193static unsigned int timbuart_get_mctrl(struct uart_port *port)
194{
195 u8 cts = ioread8(port->membase + TIMBUART_CTRL);
196 dev_dbg(port->dev, "%s - cts %x\n", __func__, cts);
197
198 if (cts & TIMBUART_CTRL_CTS)
199 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
200 else
201 return TIOCM_DSR | TIOCM_CAR;
202}
203
204static void timbuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
205{
206 dev_dbg(port->dev, "%s - %x\n", __func__, mctrl);
207
208 if (mctrl & TIOCM_RTS)
209 iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL);
210 else
211 iowrite8(0, port->membase + TIMBUART_CTRL);
212}
213
214static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier)
215{
216 unsigned int cts;
217
218 if (isr & CTS_DELTA) {
219 /* ack */
220 iowrite32(CTS_DELTA, port->membase + TIMBUART_ISR);
221 cts = timbuart_get_mctrl(port);
222 uart_handle_cts_change(port, cts & TIOCM_CTS);
223 wake_up_interruptible(&port->state->port.delta_msr_wait);
224 }
225
226 *ier |= CTS_DELTA;
227}
228
229static void timbuart_break_ctl(struct uart_port *port, int ctl)
230{
231 /* N/A */
232}
233
234static int timbuart_startup(struct uart_port *port)
235{
236 struct timbuart_port *uart =
237 container_of(port, struct timbuart_port, port);
238
239 dev_dbg(port->dev, "%s\n", __func__);
240
241 iowrite8(TIMBUART_CTRL_FLSHRX, port->membase + TIMBUART_CTRL);
242 iowrite32(0x1ff, port->membase + TIMBUART_ISR);
243 /* Enable all but TX interrupts */
244 iowrite32(RXBAF | RXBF | RXTT | CTS_DELTA,
245 port->membase + TIMBUART_IER);
246
247 return request_irq(port->irq, timbuart_handleinterrupt, IRQF_SHARED,
248 "timb-uart", uart);
249}
250
251static void timbuart_shutdown(struct uart_port *port)
252{
253 struct timbuart_port *uart =
254 container_of(port, struct timbuart_port, port);
255 dev_dbg(port->dev, "%s\n", __func__);
256 free_irq(port->irq, uart);
257 iowrite32(0, port->membase + TIMBUART_IER);
258
259 timbuart_flush_buffer(port);
260}
261
262static int get_bindex(int baud)
263{
264 int i;
265
266 for (i = 0; i < ARRAY_SIZE(baudrates); i++)
267 if (baud <= baudrates[i])
268 return i;
269
270 return -1;
271}
272
273static void timbuart_set_termios(struct uart_port *port,
274 struct ktermios *termios,
275 const struct ktermios *old)
276{
277 unsigned int baud;
278 short bindex;
279 unsigned long flags;
280
281 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
282 bindex = get_bindex(baud);
283 dev_dbg(port->dev, "%s - bindex %d\n", __func__, bindex);
284
285 if (bindex < 0)
286 bindex = 0;
287 baud = baudrates[bindex];
288
289 /* The serial layer calls into this once with old = NULL when setting
290 up initially */
291 if (old)
292 tty_termios_copy_hw(termios, old);
293 tty_termios_encode_baud_rate(termios, baud, baud);
294
295 uart_port_lock_irqsave(port, &flags);
296 iowrite8((u8)bindex, port->membase + TIMBUART_BAUDRATE);
297 uart_update_timeout(port, termios->c_cflag, baud);
298 uart_port_unlock_irqrestore(port, flags);
299}
300
301static const char *timbuart_type(struct uart_port *port)
302{
303 return port->type == PORT_UNKNOWN ? "timbuart" : NULL;
304}
305
306/* We do not request/release mappings of the registers here,
307 * currently it's done in the proble function.
308 */
309static void timbuart_release_port(struct uart_port *port)
310{
311 struct platform_device *pdev = to_platform_device(port->dev);
312 int size =
313 resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0));
314
315 if (port->flags & UPF_IOREMAP) {
316 iounmap(port->membase);
317 port->membase = NULL;
318 }
319
320 release_mem_region(port->mapbase, size);
321}
322
323static int timbuart_request_port(struct uart_port *port)
324{
325 struct platform_device *pdev = to_platform_device(port->dev);
326 int size =
327 resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0));
328
329 if (!request_mem_region(port->mapbase, size, "timb-uart"))
330 return -EBUSY;
331
332 if (port->flags & UPF_IOREMAP) {
333 port->membase = ioremap(port->mapbase, size);
334 if (port->membase == NULL) {
335 release_mem_region(port->mapbase, size);
336 return -ENOMEM;
337 }
338 }
339
340 return 0;
341}
342
343static irqreturn_t timbuart_handleinterrupt(int irq, void *devid)
344{
345 struct timbuart_port *uart = (struct timbuart_port *)devid;
346
347 if (ioread8(uart->port.membase + TIMBUART_IPR)) {
348 uart->last_ier = ioread32(uart->port.membase + TIMBUART_IER);
349
350 /* disable interrupts, the tasklet enables them again */
351 iowrite32(0, uart->port.membase + TIMBUART_IER);
352
353 /* fire off bottom half */
354 tasklet_schedule(&uart->tasklet);
355
356 return IRQ_HANDLED;
357 } else
358 return IRQ_NONE;
359}
360
361/*
362 * Configure/autoconfigure the port.
363 */
364static void timbuart_config_port(struct uart_port *port, int flags)
365{
366 if (flags & UART_CONFIG_TYPE) {
367 port->type = PORT_TIMBUART;
368 timbuart_request_port(port);
369 }
370}
371
372static int timbuart_verify_port(struct uart_port *port,
373 struct serial_struct *ser)
374{
375 /* we don't want the core code to modify any port params */
376 return -EINVAL;
377}
378
379static const struct uart_ops timbuart_ops = {
380 .tx_empty = timbuart_tx_empty,
381 .set_mctrl = timbuart_set_mctrl,
382 .get_mctrl = timbuart_get_mctrl,
383 .stop_tx = timbuart_stop_tx,
384 .start_tx = timbuart_start_tx,
385 .flush_buffer = timbuart_flush_buffer,
386 .stop_rx = timbuart_stop_rx,
387 .break_ctl = timbuart_break_ctl,
388 .startup = timbuart_startup,
389 .shutdown = timbuart_shutdown,
390 .set_termios = timbuart_set_termios,
391 .type = timbuart_type,
392 .release_port = timbuart_release_port,
393 .request_port = timbuart_request_port,
394 .config_port = timbuart_config_port,
395 .verify_port = timbuart_verify_port
396};
397
398static struct uart_driver timbuart_driver = {
399 .owner = THIS_MODULE,
400 .driver_name = "timberdale_uart",
401 .dev_name = "ttyTU",
402 .major = TIMBUART_MAJOR,
403 .minor = TIMBUART_MINOR,
404 .nr = 1
405};
406
407static int timbuart_probe(struct platform_device *dev)
408{
409 int err, irq;
410 struct timbuart_port *uart;
411 struct resource *iomem;
412
413 dev_dbg(&dev->dev, "%s\n", __func__);
414
415 uart = kzalloc(sizeof(*uart), GFP_KERNEL);
416 if (!uart) {
417 err = -EINVAL;
418 goto err_mem;
419 }
420
421 uart->usedma = 0;
422
423 uart->port.uartclk = 3250000 * 16;
424 uart->port.fifosize = TIMBUART_FIFO_SIZE;
425 uart->port.regshift = 2;
426 uart->port.iotype = UPIO_MEM;
427 uart->port.ops = &timbuart_ops;
428 uart->port.irq = 0;
429 uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
430 uart->port.line = 0;
431 uart->port.dev = &dev->dev;
432
433 iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
434 if (!iomem) {
435 err = -ENOMEM;
436 goto err_register;
437 }
438 uart->port.mapbase = iomem->start;
439 uart->port.membase = NULL;
440
441 irq = platform_get_irq(dev, 0);
442 if (irq < 0) {
443 err = -EINVAL;
444 goto err_register;
445 }
446 uart->port.irq = irq;
447
448 tasklet_setup(&uart->tasklet, timbuart_tasklet);
449
450 err = uart_register_driver(&timbuart_driver);
451 if (err)
452 goto err_register;
453
454 err = uart_add_one_port(&timbuart_driver, &uart->port);
455 if (err)
456 goto err_add_port;
457
458 platform_set_drvdata(dev, uart);
459
460 return 0;
461
462err_add_port:
463 uart_unregister_driver(&timbuart_driver);
464err_register:
465 kfree(uart);
466err_mem:
467 printk(KERN_ERR "timberdale: Failed to register Timberdale UART: %d\n",
468 err);
469
470 return err;
471}
472
473static void timbuart_remove(struct platform_device *dev)
474{
475 struct timbuart_port *uart = platform_get_drvdata(dev);
476
477 tasklet_kill(&uart->tasklet);
478 uart_remove_one_port(&timbuart_driver, &uart->port);
479 uart_unregister_driver(&timbuart_driver);
480 kfree(uart);
481}
482
483static struct platform_driver timbuart_platform_driver = {
484 .driver = {
485 .name = "timb-uart",
486 },
487 .probe = timbuart_probe,
488 .remove = timbuart_remove,
489};
490
491module_platform_driver(timbuart_platform_driver);
492
493MODULE_DESCRIPTION("Timberdale UART driver");
494MODULE_LICENSE("GPL v2");
495MODULE_ALIAS("platform:timb-uart");
496
1/*
2 * timbuart.c timberdale FPGA UART driver
3 * Copyright (c) 2009 Intel Corporation
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License version 2 as
7 * published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
17 */
18
19/* Supports:
20 * Timberdale FPGA UART
21 */
22
23#include <linux/pci.h>
24#include <linux/interrupt.h>
25#include <linux/serial_core.h>
26#include <linux/tty.h>
27#include <linux/tty_flip.h>
28#include <linux/kernel.h>
29#include <linux/platform_device.h>
30#include <linux/ioport.h>
31#include <linux/slab.h>
32#include <linux/module.h>
33
34#include "timbuart.h"
35
36struct timbuart_port {
37 struct uart_port port;
38 struct tasklet_struct tasklet;
39 int usedma;
40 u32 last_ier;
41 struct platform_device *dev;
42};
43
44static int baudrates[] = {9600, 19200, 38400, 57600, 115200, 230400, 460800,
45 921600, 1843200, 3250000};
46
47static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier);
48
49static irqreturn_t timbuart_handleinterrupt(int irq, void *devid);
50
51static void timbuart_stop_rx(struct uart_port *port)
52{
53 /* spin lock held by upper layer, disable all RX interrupts */
54 u32 ier = ioread32(port->membase + TIMBUART_IER) & ~RXFLAGS;
55 iowrite32(ier, port->membase + TIMBUART_IER);
56}
57
58static void timbuart_stop_tx(struct uart_port *port)
59{
60 /* spinlock held by upper layer, disable TX interrupt */
61 u32 ier = ioread32(port->membase + TIMBUART_IER) & ~TXBAE;
62 iowrite32(ier, port->membase + TIMBUART_IER);
63}
64
65static void timbuart_start_tx(struct uart_port *port)
66{
67 struct timbuart_port *uart =
68 container_of(port, struct timbuart_port, port);
69
70 /* do not transfer anything here -> fire off the tasklet */
71 tasklet_schedule(&uart->tasklet);
72}
73
74static unsigned int timbuart_tx_empty(struct uart_port *port)
75{
76 u32 isr = ioread32(port->membase + TIMBUART_ISR);
77
78 return (isr & TXBE) ? TIOCSER_TEMT : 0;
79}
80
81static void timbuart_flush_buffer(struct uart_port *port)
82{
83 if (!timbuart_tx_empty(port)) {
84 u8 ctl = ioread8(port->membase + TIMBUART_CTRL) |
85 TIMBUART_CTRL_FLSHTX;
86
87 iowrite8(ctl, port->membase + TIMBUART_CTRL);
88 iowrite32(TXBF, port->membase + TIMBUART_ISR);
89 }
90}
91
92static void timbuart_rx_chars(struct uart_port *port)
93{
94 struct tty_port *tport = &port->state->port;
95
96 while (ioread32(port->membase + TIMBUART_ISR) & RXDP) {
97 u8 ch = ioread8(port->membase + TIMBUART_RXFIFO);
98 port->icount.rx++;
99 tty_insert_flip_char(tport, ch, TTY_NORMAL);
100 }
101
102 spin_unlock(&port->lock);
103 tty_flip_buffer_push(tport);
104 spin_lock(&port->lock);
105
106 dev_dbg(port->dev, "%s - total read %d bytes\n",
107 __func__, port->icount.rx);
108}
109
110static void timbuart_tx_chars(struct uart_port *port)
111{
112 struct circ_buf *xmit = &port->state->xmit;
113
114 while (!(ioread32(port->membase + TIMBUART_ISR) & TXBF) &&
115 !uart_circ_empty(xmit)) {
116 iowrite8(xmit->buf[xmit->tail],
117 port->membase + TIMBUART_TXFIFO);
118 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
119 port->icount.tx++;
120 }
121
122 dev_dbg(port->dev,
123 "%s - total written %d bytes, CTL: %x, RTS: %x, baud: %x\n",
124 __func__,
125 port->icount.tx,
126 ioread8(port->membase + TIMBUART_CTRL),
127 port->mctrl & TIOCM_RTS,
128 ioread8(port->membase + TIMBUART_BAUDRATE));
129}
130
131static void timbuart_handle_tx_port(struct uart_port *port, u32 isr, u32 *ier)
132{
133 struct timbuart_port *uart =
134 container_of(port, struct timbuart_port, port);
135 struct circ_buf *xmit = &port->state->xmit;
136
137 if (uart_circ_empty(xmit) || uart_tx_stopped(port))
138 return;
139
140 if (port->x_char)
141 return;
142
143 if (isr & TXFLAGS) {
144 timbuart_tx_chars(port);
145 /* clear all TX interrupts */
146 iowrite32(TXFLAGS, port->membase + TIMBUART_ISR);
147
148 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
149 uart_write_wakeup(port);
150 } else
151 /* Re-enable any tx interrupt */
152 *ier |= uart->last_ier & TXFLAGS;
153
154 /* enable interrupts if there are chars in the transmit buffer,
155 * Or if we delivered some bytes and want the almost empty interrupt
156 * we wake up the upper layer later when we got the interrupt
157 * to give it some time to go out...
158 */
159 if (!uart_circ_empty(xmit))
160 *ier |= TXBAE;
161
162 dev_dbg(port->dev, "%s - leaving\n", __func__);
163}
164
165static void timbuart_handle_rx_port(struct uart_port *port, u32 isr, u32 *ier)
166{
167 if (isr & RXFLAGS) {
168 /* Some RX status is set */
169 if (isr & RXBF) {
170 u8 ctl = ioread8(port->membase + TIMBUART_CTRL) |
171 TIMBUART_CTRL_FLSHRX;
172 iowrite8(ctl, port->membase + TIMBUART_CTRL);
173 port->icount.overrun++;
174 } else if (isr & (RXDP))
175 timbuart_rx_chars(port);
176
177 /* ack all RX interrupts */
178 iowrite32(RXFLAGS, port->membase + TIMBUART_ISR);
179 }
180
181 /* always have the RX interrupts enabled */
182 *ier |= RXBAF | RXBF | RXTT;
183
184 dev_dbg(port->dev, "%s - leaving\n", __func__);
185}
186
187static void timbuart_tasklet(unsigned long arg)
188{
189 struct timbuart_port *uart = (struct timbuart_port *)arg;
190 u32 isr, ier = 0;
191
192 spin_lock(&uart->port.lock);
193
194 isr = ioread32(uart->port.membase + TIMBUART_ISR);
195 dev_dbg(uart->port.dev, "%s ISR: %x\n", __func__, isr);
196
197 if (!uart->usedma)
198 timbuart_handle_tx_port(&uart->port, isr, &ier);
199
200 timbuart_mctrl_check(&uart->port, isr, &ier);
201
202 if (!uart->usedma)
203 timbuart_handle_rx_port(&uart->port, isr, &ier);
204
205 iowrite32(ier, uart->port.membase + TIMBUART_IER);
206
207 spin_unlock(&uart->port.lock);
208 dev_dbg(uart->port.dev, "%s leaving\n", __func__);
209}
210
211static unsigned int timbuart_get_mctrl(struct uart_port *port)
212{
213 u8 cts = ioread8(port->membase + TIMBUART_CTRL);
214 dev_dbg(port->dev, "%s - cts %x\n", __func__, cts);
215
216 if (cts & TIMBUART_CTRL_CTS)
217 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
218 else
219 return TIOCM_DSR | TIOCM_CAR;
220}
221
222static void timbuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
223{
224 dev_dbg(port->dev, "%s - %x\n", __func__, mctrl);
225
226 if (mctrl & TIOCM_RTS)
227 iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL);
228 else
229 iowrite8(0, port->membase + TIMBUART_CTRL);
230}
231
232static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier)
233{
234 unsigned int cts;
235
236 if (isr & CTS_DELTA) {
237 /* ack */
238 iowrite32(CTS_DELTA, port->membase + TIMBUART_ISR);
239 cts = timbuart_get_mctrl(port);
240 uart_handle_cts_change(port, cts & TIOCM_CTS);
241 wake_up_interruptible(&port->state->port.delta_msr_wait);
242 }
243
244 *ier |= CTS_DELTA;
245}
246
247static void timbuart_break_ctl(struct uart_port *port, int ctl)
248{
249 /* N/A */
250}
251
252static int timbuart_startup(struct uart_port *port)
253{
254 struct timbuart_port *uart =
255 container_of(port, struct timbuart_port, port);
256
257 dev_dbg(port->dev, "%s\n", __func__);
258
259 iowrite8(TIMBUART_CTRL_FLSHRX, port->membase + TIMBUART_CTRL);
260 iowrite32(0x1ff, port->membase + TIMBUART_ISR);
261 /* Enable all but TX interrupts */
262 iowrite32(RXBAF | RXBF | RXTT | CTS_DELTA,
263 port->membase + TIMBUART_IER);
264
265 return request_irq(port->irq, timbuart_handleinterrupt, IRQF_SHARED,
266 "timb-uart", uart);
267}
268
269static void timbuart_shutdown(struct uart_port *port)
270{
271 struct timbuart_port *uart =
272 container_of(port, struct timbuart_port, port);
273 dev_dbg(port->dev, "%s\n", __func__);
274 free_irq(port->irq, uart);
275 iowrite32(0, port->membase + TIMBUART_IER);
276
277 timbuart_flush_buffer(port);
278}
279
280static int get_bindex(int baud)
281{
282 int i;
283
284 for (i = 0; i < ARRAY_SIZE(baudrates); i++)
285 if (baud <= baudrates[i])
286 return i;
287
288 return -1;
289}
290
291static void timbuart_set_termios(struct uart_port *port,
292 struct ktermios *termios,
293 struct ktermios *old)
294{
295 unsigned int baud;
296 short bindex;
297 unsigned long flags;
298
299 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
300 bindex = get_bindex(baud);
301 dev_dbg(port->dev, "%s - bindex %d\n", __func__, bindex);
302
303 if (bindex < 0)
304 bindex = 0;
305 baud = baudrates[bindex];
306
307 /* The serial layer calls into this once with old = NULL when setting
308 up initially */
309 if (old)
310 tty_termios_copy_hw(termios, old);
311 tty_termios_encode_baud_rate(termios, baud, baud);
312
313 spin_lock_irqsave(&port->lock, flags);
314 iowrite8((u8)bindex, port->membase + TIMBUART_BAUDRATE);
315 uart_update_timeout(port, termios->c_cflag, baud);
316 spin_unlock_irqrestore(&port->lock, flags);
317}
318
319static const char *timbuart_type(struct uart_port *port)
320{
321 return port->type == PORT_UNKNOWN ? "timbuart" : NULL;
322}
323
324/* We do not request/release mappings of the registers here,
325 * currently it's done in the proble function.
326 */
327static void timbuart_release_port(struct uart_port *port)
328{
329 struct platform_device *pdev = to_platform_device(port->dev);
330 int size =
331 resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0));
332
333 if (port->flags & UPF_IOREMAP) {
334 iounmap(port->membase);
335 port->membase = NULL;
336 }
337
338 release_mem_region(port->mapbase, size);
339}
340
341static int timbuart_request_port(struct uart_port *port)
342{
343 struct platform_device *pdev = to_platform_device(port->dev);
344 int size =
345 resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0));
346
347 if (!request_mem_region(port->mapbase, size, "timb-uart"))
348 return -EBUSY;
349
350 if (port->flags & UPF_IOREMAP) {
351 port->membase = ioremap(port->mapbase, size);
352 if (port->membase == NULL) {
353 release_mem_region(port->mapbase, size);
354 return -ENOMEM;
355 }
356 }
357
358 return 0;
359}
360
361static irqreturn_t timbuart_handleinterrupt(int irq, void *devid)
362{
363 struct timbuart_port *uart = (struct timbuart_port *)devid;
364
365 if (ioread8(uart->port.membase + TIMBUART_IPR)) {
366 uart->last_ier = ioread32(uart->port.membase + TIMBUART_IER);
367
368 /* disable interrupts, the tasklet enables them again */
369 iowrite32(0, uart->port.membase + TIMBUART_IER);
370
371 /* fire off bottom half */
372 tasklet_schedule(&uart->tasklet);
373
374 return IRQ_HANDLED;
375 } else
376 return IRQ_NONE;
377}
378
379/*
380 * Configure/autoconfigure the port.
381 */
382static void timbuart_config_port(struct uart_port *port, int flags)
383{
384 if (flags & UART_CONFIG_TYPE) {
385 port->type = PORT_TIMBUART;
386 timbuart_request_port(port);
387 }
388}
389
390static int timbuart_verify_port(struct uart_port *port,
391 struct serial_struct *ser)
392{
393 /* we don't want the core code to modify any port params */
394 return -EINVAL;
395}
396
397static const struct uart_ops timbuart_ops = {
398 .tx_empty = timbuart_tx_empty,
399 .set_mctrl = timbuart_set_mctrl,
400 .get_mctrl = timbuart_get_mctrl,
401 .stop_tx = timbuart_stop_tx,
402 .start_tx = timbuart_start_tx,
403 .flush_buffer = timbuart_flush_buffer,
404 .stop_rx = timbuart_stop_rx,
405 .break_ctl = timbuart_break_ctl,
406 .startup = timbuart_startup,
407 .shutdown = timbuart_shutdown,
408 .set_termios = timbuart_set_termios,
409 .type = timbuart_type,
410 .release_port = timbuart_release_port,
411 .request_port = timbuart_request_port,
412 .config_port = timbuart_config_port,
413 .verify_port = timbuart_verify_port
414};
415
416static struct uart_driver timbuart_driver = {
417 .owner = THIS_MODULE,
418 .driver_name = "timberdale_uart",
419 .dev_name = "ttyTU",
420 .major = TIMBUART_MAJOR,
421 .minor = TIMBUART_MINOR,
422 .nr = 1
423};
424
425static int timbuart_probe(struct platform_device *dev)
426{
427 int err, irq;
428 struct timbuart_port *uart;
429 struct resource *iomem;
430
431 dev_dbg(&dev->dev, "%s\n", __func__);
432
433 uart = kzalloc(sizeof(*uart), GFP_KERNEL);
434 if (!uart) {
435 err = -EINVAL;
436 goto err_mem;
437 }
438
439 uart->usedma = 0;
440
441 uart->port.uartclk = 3250000 * 16;
442 uart->port.fifosize = TIMBUART_FIFO_SIZE;
443 uart->port.regshift = 2;
444 uart->port.iotype = UPIO_MEM;
445 uart->port.ops = &timbuart_ops;
446 uart->port.irq = 0;
447 uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
448 uart->port.line = 0;
449 uart->port.dev = &dev->dev;
450
451 iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
452 if (!iomem) {
453 err = -ENOMEM;
454 goto err_register;
455 }
456 uart->port.mapbase = iomem->start;
457 uart->port.membase = NULL;
458
459 irq = platform_get_irq(dev, 0);
460 if (irq < 0) {
461 err = -EINVAL;
462 goto err_register;
463 }
464 uart->port.irq = irq;
465
466 tasklet_init(&uart->tasklet, timbuart_tasklet, (unsigned long)uart);
467
468 err = uart_register_driver(&timbuart_driver);
469 if (err)
470 goto err_register;
471
472 err = uart_add_one_port(&timbuart_driver, &uart->port);
473 if (err)
474 goto err_add_port;
475
476 platform_set_drvdata(dev, uart);
477
478 return 0;
479
480err_add_port:
481 uart_unregister_driver(&timbuart_driver);
482err_register:
483 kfree(uart);
484err_mem:
485 printk(KERN_ERR "timberdale: Failed to register Timberdale UART: %d\n",
486 err);
487
488 return err;
489}
490
491static int timbuart_remove(struct platform_device *dev)
492{
493 struct timbuart_port *uart = platform_get_drvdata(dev);
494
495 tasklet_kill(&uart->tasklet);
496 uart_remove_one_port(&timbuart_driver, &uart->port);
497 uart_unregister_driver(&timbuart_driver);
498 kfree(uart);
499
500 return 0;
501}
502
503static struct platform_driver timbuart_platform_driver = {
504 .driver = {
505 .name = "timb-uart",
506 },
507 .probe = timbuart_probe,
508 .remove = timbuart_remove,
509};
510
511module_platform_driver(timbuart_platform_driver);
512
513MODULE_DESCRIPTION("Timberdale UART driver");
514MODULE_LICENSE("GPL v2");
515MODULE_ALIAS("platform:timb-uart");
516