Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * This file is part of wl1271
4 *
5 * Copyright (C) 2008-2009 Nokia Corporation
6 *
7 * Contact: Luciano Coelho <luciano.coelho@nokia.com>
8 */
9
10#include <linux/interrupt.h>
11#include <linux/irq.h>
12#include <linux/module.h>
13#include <linux/slab.h>
14#include <linux/swab.h>
15#include <linux/crc7.h>
16#include <linux/spi/spi.h>
17#include <linux/platform_device.h>
18#include <linux/of_irq.h>
19#include <linux/regulator/consumer.h>
20
21#include "wlcore.h"
22#include "wl12xx_80211.h"
23#include "io.h"
24
25#define WSPI_CMD_READ 0x40000000
26#define WSPI_CMD_WRITE 0x00000000
27#define WSPI_CMD_FIXED 0x20000000
28#define WSPI_CMD_BYTE_LENGTH 0x1FFE0000
29#define WSPI_CMD_BYTE_LENGTH_OFFSET 17
30#define WSPI_CMD_BYTE_ADDR 0x0001FFFF
31
32#define WSPI_INIT_CMD_CRC_LEN 5
33
34#define WSPI_INIT_CMD_START 0x00
35#define WSPI_INIT_CMD_TX 0x40
36/* the extra bypass bit is sampled by the TNET as '1' */
37#define WSPI_INIT_CMD_BYPASS_BIT 0x80
38#define WSPI_INIT_CMD_FIXEDBUSY_LEN 0x07
39#define WSPI_INIT_CMD_EN_FIXEDBUSY 0x80
40#define WSPI_INIT_CMD_DIS_FIXEDBUSY 0x00
41#define WSPI_INIT_CMD_IOD 0x40
42#define WSPI_INIT_CMD_IP 0x20
43#define WSPI_INIT_CMD_CS 0x10
44#define WSPI_INIT_CMD_WS 0x08
45#define WSPI_INIT_CMD_WSPI 0x01
46#define WSPI_INIT_CMD_END 0x01
47
48#define WSPI_INIT_CMD_LEN 8
49
50#define HW_ACCESS_WSPI_FIXED_BUSY_LEN \
51 ((WL1271_BUSY_WORD_LEN - 4) / sizeof(u32))
52#define HW_ACCESS_WSPI_INIT_CMD_MASK 0
53
54/* HW limitation: maximum possible chunk size is 4095 bytes */
55#define WSPI_MAX_CHUNK_SIZE 4092
56
57/*
58 * wl18xx driver aggregation buffer size is (13 * 4K) compared to
59 * (4 * 4K) for wl12xx, so use the larger buffer needed for wl18xx
60 */
61#define SPI_AGGR_BUFFER_SIZE (13 * SZ_4K)
62
63/* Maximum number of SPI write chunks */
64#define WSPI_MAX_NUM_OF_CHUNKS \
65 ((SPI_AGGR_BUFFER_SIZE / WSPI_MAX_CHUNK_SIZE) + 1)
66
67static const struct wilink_family_data wl127x_data = {
68 .name = "wl127x",
69 .nvs_name = "ti-connectivity/wl127x-nvs.bin",
70};
71
72static const struct wilink_family_data wl128x_data = {
73 .name = "wl128x",
74 .nvs_name = "ti-connectivity/wl128x-nvs.bin",
75};
76
77static const struct wilink_family_data wl18xx_data = {
78 .name = "wl18xx",
79 .cfg_name = "ti-connectivity/wl18xx-conf.bin",
80 .nvs_name = "ti-connectivity/wl1271-nvs.bin",
81};
82
83struct wl12xx_spi_glue {
84 struct device *dev;
85 struct platform_device *core;
86 struct regulator *reg; /* Power regulator */
87};
88
89static void wl12xx_spi_reset(struct device *child)
90{
91 struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent);
92 u8 *cmd;
93 struct spi_transfer t;
94 struct spi_message m;
95
96 cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
97 if (!cmd) {
98 dev_err(child->parent,
99 "could not allocate cmd for spi reset\n");
100 return;
101 }
102
103 memset(&t, 0, sizeof(t));
104 spi_message_init(&m);
105
106 memset(cmd, 0xff, WSPI_INIT_CMD_LEN);
107
108 t.tx_buf = cmd;
109 t.len = WSPI_INIT_CMD_LEN;
110 spi_message_add_tail(&t, &m);
111
112 spi_sync(to_spi_device(glue->dev), &m);
113
114 kfree(cmd);
115}
116
117static void wl12xx_spi_init(struct device *child)
118{
119 struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent);
120 struct spi_transfer t;
121 struct spi_message m;
122 struct spi_device *spi = to_spi_device(glue->dev);
123 u8 *cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
124
125 if (!cmd) {
126 dev_err(child->parent,
127 "could not allocate cmd for spi init\n");
128 return;
129 }
130
131 memset(&t, 0, sizeof(t));
132 spi_message_init(&m);
133
134 /*
135 * Set WSPI_INIT_COMMAND
136 * the data is being send from the MSB to LSB
137 */
138 cmd[0] = 0xff;
139 cmd[1] = 0xff;
140 cmd[2] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX;
141 cmd[3] = 0;
142 cmd[4] = 0;
143 cmd[5] = HW_ACCESS_WSPI_INIT_CMD_MASK << 3;
144 cmd[5] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN;
145
146 cmd[6] = WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS
147 | WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS;
148
149 if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0)
150 cmd[6] |= WSPI_INIT_CMD_DIS_FIXEDBUSY;
151 else
152 cmd[6] |= WSPI_INIT_CMD_EN_FIXEDBUSY;
153
154 cmd[7] = crc7_be(0, cmd+2, WSPI_INIT_CMD_CRC_LEN) | WSPI_INIT_CMD_END;
155
156 /*
157 * The above is the logical order; it must actually be stored
158 * in the buffer byte-swapped.
159 */
160 __swab32s((u32 *)cmd);
161 __swab32s((u32 *)cmd+1);
162
163 t.tx_buf = cmd;
164 t.len = WSPI_INIT_CMD_LEN;
165 spi_message_add_tail(&t, &m);
166
167 spi_sync(to_spi_device(glue->dev), &m);
168
169 /* Send extra clocks with inverted CS (high). this is required
170 * by the wilink family in order to successfully enter WSPI mode.
171 */
172 spi->mode ^= SPI_CS_HIGH;
173 memset(&m, 0, sizeof(m));
174 spi_message_init(&m);
175
176 cmd[0] = 0xff;
177 cmd[1] = 0xff;
178 cmd[2] = 0xff;
179 cmd[3] = 0xff;
180 __swab32s((u32 *)cmd);
181
182 t.tx_buf = cmd;
183 t.len = 4;
184 spi_message_add_tail(&t, &m);
185
186 spi_sync(to_spi_device(glue->dev), &m);
187
188 /* Restore chip select configuration to normal */
189 spi->mode ^= SPI_CS_HIGH;
190 kfree(cmd);
191}
192
193#define WL1271_BUSY_WORD_TIMEOUT 1000
194
195static int wl12xx_spi_read_busy(struct device *child)
196{
197 struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent);
198 struct wl1271 *wl = dev_get_drvdata(child);
199 struct spi_transfer t[1];
200 struct spi_message m;
201 u32 *busy_buf;
202 int num_busy_bytes = 0;
203
204 /*
205 * Read further busy words from SPI until a non-busy word is
206 * encountered, then read the data itself into the buffer.
207 */
208
209 num_busy_bytes = WL1271_BUSY_WORD_TIMEOUT;
210 busy_buf = wl->buffer_busyword;
211 while (num_busy_bytes) {
212 num_busy_bytes--;
213 spi_message_init(&m);
214 memset(t, 0, sizeof(t));
215 t[0].rx_buf = busy_buf;
216 t[0].len = sizeof(u32);
217 t[0].cs_change = true;
218 spi_message_add_tail(&t[0], &m);
219 spi_sync(to_spi_device(glue->dev), &m);
220
221 if (*busy_buf & 0x1)
222 return 0;
223 }
224
225 /* The SPI bus is unresponsive, the read failed. */
226 dev_err(child->parent, "SPI read busy-word timeout!\n");
227 return -ETIMEDOUT;
228}
229
230static int __must_check wl12xx_spi_raw_read(struct device *child, int addr,
231 void *buf, size_t len, bool fixed)
232{
233 struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent);
234 struct wl1271 *wl = dev_get_drvdata(child);
235 struct spi_transfer t[2];
236 struct spi_message m;
237 u32 *busy_buf;
238 u32 *cmd;
239 u32 chunk_len;
240
241 while (len > 0) {
242 chunk_len = min_t(size_t, WSPI_MAX_CHUNK_SIZE, len);
243
244 cmd = &wl->buffer_cmd;
245 busy_buf = wl->buffer_busyword;
246
247 *cmd = 0;
248 *cmd |= WSPI_CMD_READ;
249 *cmd |= (chunk_len << WSPI_CMD_BYTE_LENGTH_OFFSET) &
250 WSPI_CMD_BYTE_LENGTH;
251 *cmd |= addr & WSPI_CMD_BYTE_ADDR;
252
253 if (fixed)
254 *cmd |= WSPI_CMD_FIXED;
255
256 spi_message_init(&m);
257 memset(t, 0, sizeof(t));
258
259 t[0].tx_buf = cmd;
260 t[0].len = 4;
261 t[0].cs_change = true;
262 spi_message_add_tail(&t[0], &m);
263
264 /* Busy and non busy words read */
265 t[1].rx_buf = busy_buf;
266 t[1].len = WL1271_BUSY_WORD_LEN;
267 t[1].cs_change = true;
268 spi_message_add_tail(&t[1], &m);
269
270 spi_sync(to_spi_device(glue->dev), &m);
271
272 if (!(busy_buf[WL1271_BUSY_WORD_CNT - 1] & 0x1) &&
273 wl12xx_spi_read_busy(child)) {
274 memset(buf, 0, chunk_len);
275 return 0;
276 }
277
278 spi_message_init(&m);
279 memset(t, 0, sizeof(t));
280
281 t[0].rx_buf = buf;
282 t[0].len = chunk_len;
283 t[0].cs_change = true;
284 spi_message_add_tail(&t[0], &m);
285
286 spi_sync(to_spi_device(glue->dev), &m);
287
288 if (!fixed)
289 addr += chunk_len;
290 buf += chunk_len;
291 len -= chunk_len;
292 }
293
294 return 0;
295}
296
297static int __wl12xx_spi_raw_write(struct device *child, int addr,
298 void *buf, size_t len, bool fixed)
299{
300 struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent);
301 struct spi_transfer *t;
302 struct spi_message m;
303 u32 commands[WSPI_MAX_NUM_OF_CHUNKS]; /* 1 command per chunk */
304 u32 *cmd;
305 u32 chunk_len;
306 int i;
307
308 /* SPI write buffers - 2 for each chunk */
309 t = kzalloc(sizeof(*t) * 2 * WSPI_MAX_NUM_OF_CHUNKS, GFP_KERNEL);
310 if (!t)
311 return -ENOMEM;
312
313 WARN_ON(len > SPI_AGGR_BUFFER_SIZE);
314
315 spi_message_init(&m);
316
317 cmd = &commands[0];
318 i = 0;
319 while (len > 0) {
320 chunk_len = min_t(size_t, WSPI_MAX_CHUNK_SIZE, len);
321
322 *cmd = 0;
323 *cmd |= WSPI_CMD_WRITE;
324 *cmd |= (chunk_len << WSPI_CMD_BYTE_LENGTH_OFFSET) &
325 WSPI_CMD_BYTE_LENGTH;
326 *cmd |= addr & WSPI_CMD_BYTE_ADDR;
327
328 if (fixed)
329 *cmd |= WSPI_CMD_FIXED;
330
331 t[i].tx_buf = cmd;
332 t[i].len = sizeof(*cmd);
333 spi_message_add_tail(&t[i++], &m);
334
335 t[i].tx_buf = buf;
336 t[i].len = chunk_len;
337 spi_message_add_tail(&t[i++], &m);
338
339 if (!fixed)
340 addr += chunk_len;
341 buf += chunk_len;
342 len -= chunk_len;
343 cmd++;
344 }
345
346 spi_sync(to_spi_device(glue->dev), &m);
347
348 kfree(t);
349 return 0;
350}
351
352static int __must_check wl12xx_spi_raw_write(struct device *child, int addr,
353 void *buf, size_t len, bool fixed)
354{
355 /* The ELP wakeup write may fail the first time due to internal
356 * hardware latency. It is safer to send the wakeup command twice to
357 * avoid unexpected failures.
358 */
359 if (addr == HW_ACCESS_ELP_CTRL_REG)
360 __wl12xx_spi_raw_write(child, addr, buf, len, fixed);
361
362 return __wl12xx_spi_raw_write(child, addr, buf, len, fixed);
363}
364
365/**
366 * wl12xx_spi_set_power - power on/off the wl12xx unit
367 * @child: wl12xx device handle.
368 * @enable: true/false to power on/off the unit.
369 *
370 * use the WiFi enable regulator to enable/disable the WiFi unit.
371 */
372static int wl12xx_spi_set_power(struct device *child, bool enable)
373{
374 int ret = 0;
375 struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent);
376
377 WARN_ON(!glue->reg);
378
379 /* Update regulator state */
380 if (enable) {
381 ret = regulator_enable(glue->reg);
382 if (ret)
383 dev_err(child, "Power enable failure\n");
384 } else {
385 ret = regulator_disable(glue->reg);
386 if (ret)
387 dev_err(child, "Power disable failure\n");
388 }
389
390 return ret;
391}
392
393/*
394 * wl12xx_spi_set_block_size
395 *
396 * This function is not needed for spi mode, but need to be present.
397 * Without it defined the wlcore fallback to use the wrong packet
398 * allignment on tx.
399 */
400static void wl12xx_spi_set_block_size(struct device *child,
401 unsigned int blksz)
402{
403}
404
405static struct wl1271_if_operations spi_ops = {
406 .read = wl12xx_spi_raw_read,
407 .write = wl12xx_spi_raw_write,
408 .reset = wl12xx_spi_reset,
409 .init = wl12xx_spi_init,
410 .power = wl12xx_spi_set_power,
411 .set_block_size = wl12xx_spi_set_block_size,
412};
413
414static const struct of_device_id wlcore_spi_of_match_table[] = {
415 { .compatible = "ti,wl1271", .data = &wl127x_data},
416 { .compatible = "ti,wl1273", .data = &wl127x_data},
417 { .compatible = "ti,wl1281", .data = &wl128x_data},
418 { .compatible = "ti,wl1283", .data = &wl128x_data},
419 { .compatible = "ti,wl1285", .data = &wl128x_data},
420 { .compatible = "ti,wl1801", .data = &wl18xx_data},
421 { .compatible = "ti,wl1805", .data = &wl18xx_data},
422 { .compatible = "ti,wl1807", .data = &wl18xx_data},
423 { .compatible = "ti,wl1831", .data = &wl18xx_data},
424 { .compatible = "ti,wl1835", .data = &wl18xx_data},
425 { .compatible = "ti,wl1837", .data = &wl18xx_data},
426 { }
427};
428MODULE_DEVICE_TABLE(of, wlcore_spi_of_match_table);
429
430/**
431 * wlcore_probe_of - DT node parsing.
432 * @spi: SPI slave device parameters.
433 * @glue: wl12xx SPI bus to slave device glue parameters.
434 * @pdev_data: wlcore device parameters
435 */
436static int wlcore_probe_of(struct spi_device *spi, struct wl12xx_spi_glue *glue,
437 struct wlcore_platdev_data *pdev_data)
438{
439 struct device_node *dt_node = spi->dev.of_node;
440 const struct of_device_id *of_id;
441
442 of_id = of_match_node(wlcore_spi_of_match_table, dt_node);
443 if (!of_id)
444 return -ENODEV;
445
446 pdev_data->family = of_id->data;
447 dev_info(&spi->dev, "selected chip family is %s\n",
448 pdev_data->family->name);
449
450 pdev_data->ref_clock_xtal = of_property_read_bool(dt_node, "clock-xtal");
451
452 /* optional clock frequency params */
453 of_property_read_u32(dt_node, "ref-clock-frequency",
454 &pdev_data->ref_clock_freq);
455 of_property_read_u32(dt_node, "tcxo-clock-frequency",
456 &pdev_data->tcxo_clock_freq);
457
458 return 0;
459}
460
461static int wl1271_probe(struct spi_device *spi)
462{
463 struct wl12xx_spi_glue *glue;
464 struct wlcore_platdev_data *pdev_data;
465 struct resource res[1];
466 int ret;
467
468 pdev_data = devm_kzalloc(&spi->dev, sizeof(*pdev_data), GFP_KERNEL);
469 if (!pdev_data)
470 return -ENOMEM;
471
472 pdev_data->if_ops = &spi_ops;
473
474 glue = devm_kzalloc(&spi->dev, sizeof(*glue), GFP_KERNEL);
475 if (!glue) {
476 dev_err(&spi->dev, "can't allocate glue\n");
477 return -ENOMEM;
478 }
479
480 glue->dev = &spi->dev;
481
482 spi_set_drvdata(spi, glue);
483
484 /* This is the only SPI value that we need to set here, the rest
485 * comes from the board-peripherals file */
486 spi->bits_per_word = 32;
487
488 glue->reg = devm_regulator_get(&spi->dev, "vwlan");
489 if (IS_ERR(glue->reg))
490 return dev_err_probe(glue->dev, PTR_ERR(glue->reg),
491 "can't get regulator\n");
492
493 ret = wlcore_probe_of(spi, glue, pdev_data);
494 if (ret) {
495 dev_err(glue->dev,
496 "can't get device tree parameters (%d)\n", ret);
497 return ret;
498 }
499
500 ret = spi_setup(spi);
501 if (ret < 0) {
502 dev_err(glue->dev, "spi_setup failed\n");
503 return ret;
504 }
505
506 glue->core = platform_device_alloc(pdev_data->family->name,
507 PLATFORM_DEVID_AUTO);
508 if (!glue->core) {
509 dev_err(glue->dev, "can't allocate platform_device\n");
510 return -ENOMEM;
511 }
512
513 glue->core->dev.parent = &spi->dev;
514
515 memset(res, 0x00, sizeof(res));
516
517 res[0].start = spi->irq;
518 res[0].flags = IORESOURCE_IRQ | irq_get_trigger_type(spi->irq);
519 res[0].name = "irq";
520
521 ret = platform_device_add_resources(glue->core, res, ARRAY_SIZE(res));
522 if (ret) {
523 dev_err(glue->dev, "can't add resources\n");
524 goto out_dev_put;
525 }
526
527 ret = platform_device_add_data(glue->core, pdev_data,
528 sizeof(*pdev_data));
529 if (ret) {
530 dev_err(glue->dev, "can't add platform data\n");
531 goto out_dev_put;
532 }
533
534 ret = platform_device_add(glue->core);
535 if (ret) {
536 dev_err(glue->dev, "can't register platform device\n");
537 goto out_dev_put;
538 }
539
540 return 0;
541
542out_dev_put:
543 platform_device_put(glue->core);
544 return ret;
545}
546
547static void wl1271_remove(struct spi_device *spi)
548{
549 struct wl12xx_spi_glue *glue = spi_get_drvdata(spi);
550
551 platform_device_unregister(glue->core);
552}
553
554static struct spi_driver wl1271_spi_driver = {
555 .driver = {
556 .name = "wl1271_spi",
557 .of_match_table = wlcore_spi_of_match_table,
558 },
559
560 .probe = wl1271_probe,
561 .remove = wl1271_remove,
562};
563
564module_spi_driver(wl1271_spi_driver);
565MODULE_DESCRIPTION("TI WLAN SPI helpers");
566MODULE_LICENSE("GPL");
567MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
568MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>");
569MODULE_ALIAS("spi:wl1271");
1/*
2 * This file is part of wl1271
3 *
4 * Copyright (C) 2008-2009 Nokia Corporation
5 *
6 * Contact: Luciano Coelho <luciano.coelho@nokia.com>
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * version 2 as published by the Free Software Foundation.
11 *
12 * This program is distributed in the hope that it will be useful, but
13 * WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
20 * 02110-1301 USA
21 *
22 */
23
24#include <linux/interrupt.h>
25#include <linux/irq.h>
26#include <linux/module.h>
27#include <linux/slab.h>
28#include <linux/swab.h>
29#include <linux/crc7.h>
30#include <linux/spi/spi.h>
31#include <linux/wl12xx.h>
32#include <linux/platform_device.h>
33#include <linux/of_irq.h>
34#include <linux/regulator/consumer.h>
35
36#include "wlcore.h"
37#include "wl12xx_80211.h"
38#include "io.h"
39
40#define WSPI_CMD_READ 0x40000000
41#define WSPI_CMD_WRITE 0x00000000
42#define WSPI_CMD_FIXED 0x20000000
43#define WSPI_CMD_BYTE_LENGTH 0x1FFE0000
44#define WSPI_CMD_BYTE_LENGTH_OFFSET 17
45#define WSPI_CMD_BYTE_ADDR 0x0001FFFF
46
47#define WSPI_INIT_CMD_CRC_LEN 5
48
49#define WSPI_INIT_CMD_START 0x00
50#define WSPI_INIT_CMD_TX 0x40
51/* the extra bypass bit is sampled by the TNET as '1' */
52#define WSPI_INIT_CMD_BYPASS_BIT 0x80
53#define WSPI_INIT_CMD_FIXEDBUSY_LEN 0x07
54#define WSPI_INIT_CMD_EN_FIXEDBUSY 0x80
55#define WSPI_INIT_CMD_DIS_FIXEDBUSY 0x00
56#define WSPI_INIT_CMD_IOD 0x40
57#define WSPI_INIT_CMD_IP 0x20
58#define WSPI_INIT_CMD_CS 0x10
59#define WSPI_INIT_CMD_WS 0x08
60#define WSPI_INIT_CMD_WSPI 0x01
61#define WSPI_INIT_CMD_END 0x01
62
63#define WSPI_INIT_CMD_LEN 8
64
65#define HW_ACCESS_WSPI_FIXED_BUSY_LEN \
66 ((WL1271_BUSY_WORD_LEN - 4) / sizeof(u32))
67#define HW_ACCESS_WSPI_INIT_CMD_MASK 0
68
69/* HW limitation: maximum possible chunk size is 4095 bytes */
70#define WSPI_MAX_CHUNK_SIZE 4092
71
72/*
73 * wl18xx driver aggregation buffer size is (13 * PAGE_SIZE) compared to
74 * (4 * PAGE_SIZE) for wl12xx, so use the larger buffer needed for wl18xx
75 */
76#define SPI_AGGR_BUFFER_SIZE (13 * PAGE_SIZE)
77
78/* Maximum number of SPI write chunks */
79#define WSPI_MAX_NUM_OF_CHUNKS \
80 ((SPI_AGGR_BUFFER_SIZE / WSPI_MAX_CHUNK_SIZE) + 1)
81
82static const struct wilink_family_data wl127x_data = {
83 .name = "wl127x",
84 .nvs_name = "ti-connectivity/wl127x-nvs.bin",
85};
86
87static const struct wilink_family_data wl128x_data = {
88 .name = "wl128x",
89 .nvs_name = "ti-connectivity/wl128x-nvs.bin",
90};
91
92static const struct wilink_family_data wl18xx_data = {
93 .name = "wl18xx",
94 .cfg_name = "ti-connectivity/wl18xx-conf.bin",
95};
96
97struct wl12xx_spi_glue {
98 struct device *dev;
99 struct platform_device *core;
100 struct regulator *reg; /* Power regulator */
101};
102
103static void wl12xx_spi_reset(struct device *child)
104{
105 struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent);
106 u8 *cmd;
107 struct spi_transfer t;
108 struct spi_message m;
109
110 cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
111 if (!cmd) {
112 dev_err(child->parent,
113 "could not allocate cmd for spi reset\n");
114 return;
115 }
116
117 memset(&t, 0, sizeof(t));
118 spi_message_init(&m);
119
120 memset(cmd, 0xff, WSPI_INIT_CMD_LEN);
121
122 t.tx_buf = cmd;
123 t.len = WSPI_INIT_CMD_LEN;
124 spi_message_add_tail(&t, &m);
125
126 spi_sync(to_spi_device(glue->dev), &m);
127
128 kfree(cmd);
129}
130
131static void wl12xx_spi_init(struct device *child)
132{
133 struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent);
134 struct spi_transfer t;
135 struct spi_message m;
136 struct spi_device *spi = to_spi_device(glue->dev);
137 u8 *cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
138
139 if (!cmd) {
140 dev_err(child->parent,
141 "could not allocate cmd for spi init\n");
142 return;
143 }
144
145 memset(&t, 0, sizeof(t));
146 spi_message_init(&m);
147
148 /*
149 * Set WSPI_INIT_COMMAND
150 * the data is being send from the MSB to LSB
151 */
152 cmd[0] = 0xff;
153 cmd[1] = 0xff;
154 cmd[2] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX;
155 cmd[3] = 0;
156 cmd[4] = 0;
157 cmd[5] = HW_ACCESS_WSPI_INIT_CMD_MASK << 3;
158 cmd[5] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN;
159
160 cmd[6] = WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS
161 | WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS;
162
163 if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0)
164 cmd[6] |= WSPI_INIT_CMD_DIS_FIXEDBUSY;
165 else
166 cmd[6] |= WSPI_INIT_CMD_EN_FIXEDBUSY;
167
168 cmd[7] = crc7_be(0, cmd+2, WSPI_INIT_CMD_CRC_LEN) | WSPI_INIT_CMD_END;
169
170 /*
171 * The above is the logical order; it must actually be stored
172 * in the buffer byte-swapped.
173 */
174 __swab32s((u32 *)cmd);
175 __swab32s((u32 *)cmd+1);
176
177 t.tx_buf = cmd;
178 t.len = WSPI_INIT_CMD_LEN;
179 spi_message_add_tail(&t, &m);
180
181 spi_sync(to_spi_device(glue->dev), &m);
182
183 /* Send extra clocks with inverted CS (high). this is required
184 * by the wilink family in order to successfully enter WSPI mode.
185 */
186 spi->mode ^= SPI_CS_HIGH;
187 memset(&m, 0, sizeof(m));
188 spi_message_init(&m);
189
190 cmd[0] = 0xff;
191 cmd[1] = 0xff;
192 cmd[2] = 0xff;
193 cmd[3] = 0xff;
194 __swab32s((u32 *)cmd);
195
196 t.tx_buf = cmd;
197 t.len = 4;
198 spi_message_add_tail(&t, &m);
199
200 spi_sync(to_spi_device(glue->dev), &m);
201
202 /* Restore chip select configration to normal */
203 spi->mode ^= SPI_CS_HIGH;
204 kfree(cmd);
205}
206
207#define WL1271_BUSY_WORD_TIMEOUT 1000
208
209static int wl12xx_spi_read_busy(struct device *child)
210{
211 struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent);
212 struct wl1271 *wl = dev_get_drvdata(child);
213 struct spi_transfer t[1];
214 struct spi_message m;
215 u32 *busy_buf;
216 int num_busy_bytes = 0;
217
218 /*
219 * Read further busy words from SPI until a non-busy word is
220 * encountered, then read the data itself into the buffer.
221 */
222
223 num_busy_bytes = WL1271_BUSY_WORD_TIMEOUT;
224 busy_buf = wl->buffer_busyword;
225 while (num_busy_bytes) {
226 num_busy_bytes--;
227 spi_message_init(&m);
228 memset(t, 0, sizeof(t));
229 t[0].rx_buf = busy_buf;
230 t[0].len = sizeof(u32);
231 t[0].cs_change = true;
232 spi_message_add_tail(&t[0], &m);
233 spi_sync(to_spi_device(glue->dev), &m);
234
235 if (*busy_buf & 0x1)
236 return 0;
237 }
238
239 /* The SPI bus is unresponsive, the read failed. */
240 dev_err(child->parent, "SPI read busy-word timeout!\n");
241 return -ETIMEDOUT;
242}
243
244static int __must_check wl12xx_spi_raw_read(struct device *child, int addr,
245 void *buf, size_t len, bool fixed)
246{
247 struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent);
248 struct wl1271 *wl = dev_get_drvdata(child);
249 struct spi_transfer t[2];
250 struct spi_message m;
251 u32 *busy_buf;
252 u32 *cmd;
253 u32 chunk_len;
254
255 while (len > 0) {
256 chunk_len = min_t(size_t, WSPI_MAX_CHUNK_SIZE, len);
257
258 cmd = &wl->buffer_cmd;
259 busy_buf = wl->buffer_busyword;
260
261 *cmd = 0;
262 *cmd |= WSPI_CMD_READ;
263 *cmd |= (chunk_len << WSPI_CMD_BYTE_LENGTH_OFFSET) &
264 WSPI_CMD_BYTE_LENGTH;
265 *cmd |= addr & WSPI_CMD_BYTE_ADDR;
266
267 if (fixed)
268 *cmd |= WSPI_CMD_FIXED;
269
270 spi_message_init(&m);
271 memset(t, 0, sizeof(t));
272
273 t[0].tx_buf = cmd;
274 t[0].len = 4;
275 t[0].cs_change = true;
276 spi_message_add_tail(&t[0], &m);
277
278 /* Busy and non busy words read */
279 t[1].rx_buf = busy_buf;
280 t[1].len = WL1271_BUSY_WORD_LEN;
281 t[1].cs_change = true;
282 spi_message_add_tail(&t[1], &m);
283
284 spi_sync(to_spi_device(glue->dev), &m);
285
286 if (!(busy_buf[WL1271_BUSY_WORD_CNT - 1] & 0x1) &&
287 wl12xx_spi_read_busy(child)) {
288 memset(buf, 0, chunk_len);
289 return 0;
290 }
291
292 spi_message_init(&m);
293 memset(t, 0, sizeof(t));
294
295 t[0].rx_buf = buf;
296 t[0].len = chunk_len;
297 t[0].cs_change = true;
298 spi_message_add_tail(&t[0], &m);
299
300 spi_sync(to_spi_device(glue->dev), &m);
301
302 if (!fixed)
303 addr += chunk_len;
304 buf += chunk_len;
305 len -= chunk_len;
306 }
307
308 return 0;
309}
310
311static int __wl12xx_spi_raw_write(struct device *child, int addr,
312 void *buf, size_t len, bool fixed)
313{
314 struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent);
315 struct spi_transfer *t;
316 struct spi_message m;
317 u32 commands[WSPI_MAX_NUM_OF_CHUNKS]; /* 1 command per chunk */
318 u32 *cmd;
319 u32 chunk_len;
320 int i;
321
322 /* SPI write buffers - 2 for each chunk */
323 t = kzalloc(sizeof(*t) * 2 * WSPI_MAX_NUM_OF_CHUNKS, GFP_KERNEL);
324 if (!t)
325 return -ENOMEM;
326
327 WARN_ON(len > SPI_AGGR_BUFFER_SIZE);
328
329 spi_message_init(&m);
330
331 cmd = &commands[0];
332 i = 0;
333 while (len > 0) {
334 chunk_len = min_t(size_t, WSPI_MAX_CHUNK_SIZE, len);
335
336 *cmd = 0;
337 *cmd |= WSPI_CMD_WRITE;
338 *cmd |= (chunk_len << WSPI_CMD_BYTE_LENGTH_OFFSET) &
339 WSPI_CMD_BYTE_LENGTH;
340 *cmd |= addr & WSPI_CMD_BYTE_ADDR;
341
342 if (fixed)
343 *cmd |= WSPI_CMD_FIXED;
344
345 t[i].tx_buf = cmd;
346 t[i].len = sizeof(*cmd);
347 spi_message_add_tail(&t[i++], &m);
348
349 t[i].tx_buf = buf;
350 t[i].len = chunk_len;
351 spi_message_add_tail(&t[i++], &m);
352
353 if (!fixed)
354 addr += chunk_len;
355 buf += chunk_len;
356 len -= chunk_len;
357 cmd++;
358 }
359
360 spi_sync(to_spi_device(glue->dev), &m);
361
362 kfree(t);
363 return 0;
364}
365
366static int __must_check wl12xx_spi_raw_write(struct device *child, int addr,
367 void *buf, size_t len, bool fixed)
368{
369 int ret;
370
371 /* The ELP wakeup write may fail the first time due to internal
372 * hardware latency. It is safer to send the wakeup command twice to
373 * avoid unexpected failures.
374 */
375 if (addr == HW_ACCESS_ELP_CTRL_REG)
376 ret = __wl12xx_spi_raw_write(child, addr, buf, len, fixed);
377 ret = __wl12xx_spi_raw_write(child, addr, buf, len, fixed);
378
379 return ret;
380}
381
382/**
383 * wl12xx_spi_set_power - power on/off the wl12xx unit
384 * @child: wl12xx device handle.
385 * @enable: true/false to power on/off the unit.
386 *
387 * use the WiFi enable regulator to enable/disable the WiFi unit.
388 */
389static int wl12xx_spi_set_power(struct device *child, bool enable)
390{
391 int ret = 0;
392 struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent);
393
394 WARN_ON(!glue->reg);
395
396 /* Update regulator state */
397 if (enable) {
398 ret = regulator_enable(glue->reg);
399 if (ret)
400 dev_err(child, "Power enable failure\n");
401 } else {
402 ret = regulator_disable(glue->reg);
403 if (ret)
404 dev_err(child, "Power disable failure\n");
405 }
406
407 return ret;
408}
409
410/**
411 * wl12xx_spi_set_block_size
412 *
413 * This function is not needed for spi mode, but need to be present.
414 * Without it defined the wlcore fallback to use the wrong packet
415 * allignment on tx.
416 */
417static void wl12xx_spi_set_block_size(struct device *child,
418 unsigned int blksz)
419{
420}
421
422static struct wl1271_if_operations spi_ops = {
423 .read = wl12xx_spi_raw_read,
424 .write = wl12xx_spi_raw_write,
425 .reset = wl12xx_spi_reset,
426 .init = wl12xx_spi_init,
427 .power = wl12xx_spi_set_power,
428 .set_block_size = wl12xx_spi_set_block_size,
429};
430
431static const struct of_device_id wlcore_spi_of_match_table[] = {
432 { .compatible = "ti,wl1271", .data = &wl127x_data},
433 { .compatible = "ti,wl1273", .data = &wl127x_data},
434 { .compatible = "ti,wl1281", .data = &wl128x_data},
435 { .compatible = "ti,wl1283", .data = &wl128x_data},
436 { .compatible = "ti,wl1801", .data = &wl18xx_data},
437 { .compatible = "ti,wl1805", .data = &wl18xx_data},
438 { .compatible = "ti,wl1807", .data = &wl18xx_data},
439 { .compatible = "ti,wl1831", .data = &wl18xx_data},
440 { .compatible = "ti,wl1835", .data = &wl18xx_data},
441 { .compatible = "ti,wl1837", .data = &wl18xx_data},
442 { }
443};
444MODULE_DEVICE_TABLE(of, wlcore_spi_of_match_table);
445
446/**
447 * wlcore_probe_of - DT node parsing.
448 * @spi: SPI slave device parameters.
449 * @res: resource parameters.
450 * @glue: wl12xx SPI bus to slave device glue parameters.
451 * @pdev_data: wlcore device parameters
452 */
453static int wlcore_probe_of(struct spi_device *spi, struct wl12xx_spi_glue *glue,
454 struct wlcore_platdev_data *pdev_data)
455{
456 struct device_node *dt_node = spi->dev.of_node;
457 const struct of_device_id *of_id;
458
459 of_id = of_match_node(wlcore_spi_of_match_table, dt_node);
460 if (!of_id)
461 return -ENODEV;
462
463 pdev_data->family = of_id->data;
464 dev_info(&spi->dev, "selected chip family is %s\n",
465 pdev_data->family->name);
466
467 if (of_find_property(dt_node, "clock-xtal", NULL))
468 pdev_data->ref_clock_xtal = true;
469
470 /* optional clock frequency params */
471 of_property_read_u32(dt_node, "ref-clock-frequency",
472 &pdev_data->ref_clock_freq);
473 of_property_read_u32(dt_node, "tcxo-clock-frequency",
474 &pdev_data->tcxo_clock_freq);
475
476 return 0;
477}
478
479static int wl1271_probe(struct spi_device *spi)
480{
481 struct wl12xx_spi_glue *glue;
482 struct wlcore_platdev_data *pdev_data;
483 struct resource res[1];
484 int ret;
485
486 pdev_data = devm_kzalloc(&spi->dev, sizeof(*pdev_data), GFP_KERNEL);
487 if (!pdev_data)
488 return -ENOMEM;
489
490 pdev_data->if_ops = &spi_ops;
491
492 glue = devm_kzalloc(&spi->dev, sizeof(*glue), GFP_KERNEL);
493 if (!glue) {
494 dev_err(&spi->dev, "can't allocate glue\n");
495 return -ENOMEM;
496 }
497
498 glue->dev = &spi->dev;
499
500 spi_set_drvdata(spi, glue);
501
502 /* This is the only SPI value that we need to set here, the rest
503 * comes from the board-peripherals file */
504 spi->bits_per_word = 32;
505
506 glue->reg = devm_regulator_get(&spi->dev, "vwlan");
507 if (PTR_ERR(glue->reg) == -EPROBE_DEFER)
508 return -EPROBE_DEFER;
509 if (IS_ERR(glue->reg)) {
510 dev_err(glue->dev, "can't get regulator\n");
511 return PTR_ERR(glue->reg);
512 }
513
514 ret = wlcore_probe_of(spi, glue, pdev_data);
515 if (ret) {
516 dev_err(glue->dev,
517 "can't get device tree parameters (%d)\n", ret);
518 return ret;
519 }
520
521 ret = spi_setup(spi);
522 if (ret < 0) {
523 dev_err(glue->dev, "spi_setup failed\n");
524 return ret;
525 }
526
527 glue->core = platform_device_alloc(pdev_data->family->name,
528 PLATFORM_DEVID_AUTO);
529 if (!glue->core) {
530 dev_err(glue->dev, "can't allocate platform_device\n");
531 return -ENOMEM;
532 }
533
534 glue->core->dev.parent = &spi->dev;
535
536 memset(res, 0x00, sizeof(res));
537
538 res[0].start = spi->irq;
539 res[0].flags = IORESOURCE_IRQ | irq_get_trigger_type(spi->irq);
540 res[0].name = "irq";
541
542 ret = platform_device_add_resources(glue->core, res, ARRAY_SIZE(res));
543 if (ret) {
544 dev_err(glue->dev, "can't add resources\n");
545 goto out_dev_put;
546 }
547
548 ret = platform_device_add_data(glue->core, pdev_data,
549 sizeof(*pdev_data));
550 if (ret) {
551 dev_err(glue->dev, "can't add platform data\n");
552 goto out_dev_put;
553 }
554
555 ret = platform_device_add(glue->core);
556 if (ret) {
557 dev_err(glue->dev, "can't register platform device\n");
558 goto out_dev_put;
559 }
560
561 return 0;
562
563out_dev_put:
564 platform_device_put(glue->core);
565 return ret;
566}
567
568static int wl1271_remove(struct spi_device *spi)
569{
570 struct wl12xx_spi_glue *glue = spi_get_drvdata(spi);
571
572 platform_device_unregister(glue->core);
573
574 return 0;
575}
576
577static struct spi_driver wl1271_spi_driver = {
578 .driver = {
579 .name = "wl1271_spi",
580 .of_match_table = of_match_ptr(wlcore_spi_of_match_table),
581 },
582
583 .probe = wl1271_probe,
584 .remove = wl1271_remove,
585};
586
587module_spi_driver(wl1271_spi_driver);
588MODULE_LICENSE("GPL");
589MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
590MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>");
591MODULE_ALIAS("spi:wl1271");