Linux Audio

Check our new training course

Loading...
v6.13.7
  1// SPDX-License-Identifier: GPL-2.0-only
  2/*
  3 * Copyright (C) ST-Ericsson SA 2010
  4 *
 
  5 * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
  6 */
  7
  8#include <linux/bitops.h>
  9#include <linux/cleanup.h>
 10#include <linux/gpio/driver.h>
 11#include <linux/init.h>
 
 
 
 12#include <linux/interrupt.h>
 
 13#include <linux/mfd/stmpe.h>
 14#include <linux/property.h>
 15#include <linux/platform_device.h>
 16#include <linux/seq_file.h>
 17#include <linux/slab.h>
 18
 19/*
 20 * These registers are modified under the irq bus lock and cached to avoid
 21 * unnecessary writes in bus_sync_unlock.
 22 */
 23enum { REG_RE, REG_FE, REG_IE };
 24
 25enum { LSB, CSB, MSB };
 26
 27#define CACHE_NR_REGS	3
 28/* No variant has more than 24 GPIOs */
 29#define CACHE_NR_BANKS	(24 / 8)
 30
 31struct stmpe_gpio {
 32	struct gpio_chip chip;
 33	struct stmpe *stmpe;
 
 34	struct mutex irq_lock;
 35	u32 norequest_mask;
 36	/* Caches of interrupt control registers for bus_lock */
 37	u8 regs[CACHE_NR_REGS][CACHE_NR_BANKS];
 38	u8 oldregs[CACHE_NR_REGS][CACHE_NR_BANKS];
 39};
 40
 41static int stmpe_gpio_get(struct gpio_chip *chip, unsigned offset)
 42{
 43	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
 44	struct stmpe *stmpe = stmpe_gpio->stmpe;
 45	u8 reg = stmpe->regs[STMPE_IDX_GPMR_LSB + (offset / 8)];
 46	u8 mask = BIT(offset % 8);
 47	int ret;
 48
 49	ret = stmpe_reg_read(stmpe, reg);
 50	if (ret < 0)
 51		return ret;
 52
 53	return !!(ret & mask);
 54}
 55
 56static void stmpe_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
 57{
 58	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
 59	struct stmpe *stmpe = stmpe_gpio->stmpe;
 60	int which = val ? STMPE_IDX_GPSR_LSB : STMPE_IDX_GPCR_LSB;
 61	u8 reg = stmpe->regs[which + (offset / 8)];
 62	u8 mask = BIT(offset % 8);
 63
 64	/*
 65	 * Some variants have single register for gpio set/clear functionality.
 66	 * For them we need to write 0 to clear and 1 to set.
 67	 */
 68	if (stmpe->regs[STMPE_IDX_GPSR_LSB] == stmpe->regs[STMPE_IDX_GPCR_LSB])
 69		stmpe_set_bits(stmpe, reg, mask, val ? mask : 0);
 70	else
 71		stmpe_reg_write(stmpe, reg, mask);
 72}
 73
 74static int stmpe_gpio_get_direction(struct gpio_chip *chip,
 75				    unsigned offset)
 76{
 77	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
 78	struct stmpe *stmpe = stmpe_gpio->stmpe;
 79	u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB] - (offset / 8);
 80	u8 mask = BIT(offset % 8);
 81	int ret;
 82
 83	ret = stmpe_reg_read(stmpe, reg);
 84	if (ret < 0)
 85		return ret;
 86
 87	if (ret & mask)
 88		return GPIO_LINE_DIRECTION_OUT;
 89
 90	return GPIO_LINE_DIRECTION_IN;
 91}
 92
 93static int stmpe_gpio_direction_output(struct gpio_chip *chip,
 94					 unsigned offset, int val)
 95{
 96	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
 97	struct stmpe *stmpe = stmpe_gpio->stmpe;
 98	u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)];
 99	u8 mask = BIT(offset % 8);
100
101	stmpe_gpio_set(chip, offset, val);
102
103	return stmpe_set_bits(stmpe, reg, mask, mask);
104}
105
106static int stmpe_gpio_direction_input(struct gpio_chip *chip,
107					unsigned offset)
108{
109	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
110	struct stmpe *stmpe = stmpe_gpio->stmpe;
111	u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)];
112	u8 mask = BIT(offset % 8);
113
114	return stmpe_set_bits(stmpe, reg, mask, 0);
115}
116
117static int stmpe_gpio_request(struct gpio_chip *chip, unsigned offset)
118{
119	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
120	struct stmpe *stmpe = stmpe_gpio->stmpe;
121
122	if (stmpe_gpio->norequest_mask & BIT(offset))
123		return -EINVAL;
124
125	return stmpe_set_altfunc(stmpe, BIT(offset), STMPE_BLOCK_GPIO);
126}
127
128static const struct gpio_chip template_chip = {
129	.label			= "stmpe",
130	.owner			= THIS_MODULE,
131	.get_direction		= stmpe_gpio_get_direction,
132	.direction_input	= stmpe_gpio_direction_input,
133	.get			= stmpe_gpio_get,
134	.direction_output	= stmpe_gpio_direction_output,
135	.set			= stmpe_gpio_set,
136	.request		= stmpe_gpio_request,
137	.can_sleep		= true,
138};
139
140static int stmpe_gpio_irq_set_type(struct irq_data *d, unsigned int type)
141{
142	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
143	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
144	int offset = d->hwirq;
145	int regoffset = offset / 8;
146	int mask = BIT(offset % 8);
147
148	if (type & IRQ_TYPE_LEVEL_LOW || type & IRQ_TYPE_LEVEL_HIGH)
149		return -EINVAL;
150
151	/* STMPE801 and STMPE 1600 don't have RE and FE registers */
152	if (stmpe_gpio->stmpe->partnum == STMPE801 ||
153	    stmpe_gpio->stmpe->partnum == STMPE1600)
154		return 0;
155
156	if (type & IRQ_TYPE_EDGE_RISING)
157		stmpe_gpio->regs[REG_RE][regoffset] |= mask;
158	else
159		stmpe_gpio->regs[REG_RE][regoffset] &= ~mask;
160
161	if (type & IRQ_TYPE_EDGE_FALLING)
162		stmpe_gpio->regs[REG_FE][regoffset] |= mask;
163	else
164		stmpe_gpio->regs[REG_FE][regoffset] &= ~mask;
165
166	return 0;
167}
168
169static void stmpe_gpio_irq_lock(struct irq_data *d)
170{
171	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
172	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
173
174	mutex_lock(&stmpe_gpio->irq_lock);
175}
176
177static void stmpe_gpio_irq_sync_unlock(struct irq_data *d)
178{
179	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
180	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
181	struct stmpe *stmpe = stmpe_gpio->stmpe;
182	int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8);
183	static const u8 regmap[CACHE_NR_REGS][CACHE_NR_BANKS] = {
184		[REG_RE][LSB] = STMPE_IDX_GPRER_LSB,
185		[REG_RE][CSB] = STMPE_IDX_GPRER_CSB,
186		[REG_RE][MSB] = STMPE_IDX_GPRER_MSB,
187		[REG_FE][LSB] = STMPE_IDX_GPFER_LSB,
188		[REG_FE][CSB] = STMPE_IDX_GPFER_CSB,
189		[REG_FE][MSB] = STMPE_IDX_GPFER_MSB,
190		[REG_IE][LSB] = STMPE_IDX_IEGPIOR_LSB,
191		[REG_IE][CSB] = STMPE_IDX_IEGPIOR_CSB,
192		[REG_IE][MSB] = STMPE_IDX_IEGPIOR_MSB,
193	};
194	int ret, i, j;
195
196	/*
197	 * STMPE1600: to be able to get IRQ from pins,
198	 * a read must be done on GPMR register, or a write in
199	 * GPSR or GPCR registers
200	 */
201	if (stmpe->partnum == STMPE1600) {
202		ret = stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_GPMR_LSB]);
203		if (ret < 0) {
204			dev_err(stmpe->dev, "Failed to read GPMR_LSB: %d\n", ret);
205			goto err;
206		}
207		ret = stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_GPMR_CSB]);
208		if (ret < 0) {
209			dev_err(stmpe->dev, "Failed to read GPMR_CSB: %d\n", ret);
210			goto err;
211		}
212	}
213
214	for (i = 0; i < CACHE_NR_REGS; i++) {
215		/* STMPE801 and STMPE1600 don't have RE and FE registers */
216		if ((stmpe->partnum == STMPE801 ||
217		     stmpe->partnum == STMPE1600) &&
218		     (i != REG_IE))
219			continue;
220
221		for (j = 0; j < num_banks; j++) {
222			u8 old = stmpe_gpio->oldregs[i][j];
223			u8 new = stmpe_gpio->regs[i][j];
224
225			if (new == old)
226				continue;
227
228			stmpe_gpio->oldregs[i][j] = new;
229			stmpe_reg_write(stmpe, stmpe->regs[regmap[i][j]], new);
230		}
231	}
232
233err:
234	mutex_unlock(&stmpe_gpio->irq_lock);
235}
236
237static void stmpe_gpio_irq_mask(struct irq_data *d)
238{
239	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
240	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
241	int offset = d->hwirq;
242	int regoffset = offset / 8;
243	int mask = BIT(offset % 8);
244
245	stmpe_gpio->regs[REG_IE][regoffset] &= ~mask;
246	gpiochip_disable_irq(gc, offset);
247}
248
249static void stmpe_gpio_irq_unmask(struct irq_data *d)
250{
251	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
252	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
 
253	int offset = d->hwirq;
254	int regoffset = offset / 8;
255	int mask = BIT(offset % 8);
256
257	gpiochip_enable_irq(gc, offset);
258	stmpe_gpio->regs[REG_IE][regoffset] |= mask;
 
 
 
 
 
 
 
 
 
259}
260
261static void stmpe_dbg_show_one(struct seq_file *s,
262			       struct gpio_chip *gc,
263			       unsigned offset, unsigned gpio)
264{
265	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
266	struct stmpe *stmpe = stmpe_gpio->stmpe;
 
267	bool val = !!stmpe_gpio_get(gc, offset);
268	u8 bank = offset / 8;
269	u8 dir_reg = stmpe->regs[STMPE_IDX_GPDR_LSB + bank];
270	u8 mask = BIT(offset % 8);
271	int ret;
272	u8 dir;
273
274	char *label __free(kfree) = gpiochip_dup_line_label(gc, offset);
275	if (IS_ERR(label))
276		return;
277
278	ret = stmpe_reg_read(stmpe, dir_reg);
279	if (ret < 0)
280		return;
281	dir = !!(ret & mask);
282
283	if (dir) {
284		seq_printf(s, " gpio-%-3d (%-20.20s) out %s",
285			   gpio, label ?: "(none)",
286			   val ? "hi" : "lo");
287	} else {
288		u8 edge_det_reg;
289		u8 rise_reg;
290		u8 fall_reg;
291		u8 irqen_reg;
292
293		static const char * const edge_det_values[] = {
294			"edge-inactive",
295			"edge-asserted",
296			"not-supported"
297		};
298		static const char * const rise_values[] = {
299			"no-rising-edge-detection",
300			"rising-edge-detection",
301			"not-supported"
302		};
303		static const char * const fall_values[] = {
304			"no-falling-edge-detection",
305			"falling-edge-detection",
306			"not-supported"
307		};
308		#define NOT_SUPPORTED_IDX 2
309		u8 edge_det = NOT_SUPPORTED_IDX;
310		u8 rise = NOT_SUPPORTED_IDX;
311		u8 fall = NOT_SUPPORTED_IDX;
312		bool irqen;
313
314		switch (stmpe->partnum) {
315		case STMPE610:
316		case STMPE811:
317		case STMPE1601:
318		case STMPE2401:
319		case STMPE2403:
320			edge_det_reg = stmpe->regs[STMPE_IDX_GPEDR_LSB + bank];
321			ret = stmpe_reg_read(stmpe, edge_det_reg);
322			if (ret < 0)
323				return;
324			edge_det = !!(ret & mask);
325			fallthrough;
326		case STMPE1801:
327			rise_reg = stmpe->regs[STMPE_IDX_GPRER_LSB + bank];
328			fall_reg = stmpe->regs[STMPE_IDX_GPFER_LSB + bank];
329
330			ret = stmpe_reg_read(stmpe, rise_reg);
331			if (ret < 0)
332				return;
333			rise = !!(ret & mask);
334			ret = stmpe_reg_read(stmpe, fall_reg);
335			if (ret < 0)
336				return;
337			fall = !!(ret & mask);
338			fallthrough;
339		case STMPE801:
340		case STMPE1600:
341			irqen_reg = stmpe->regs[STMPE_IDX_IEGPIOR_LSB + bank];
342			break;
343
344		default:
345			return;
346		}
347
348		ret = stmpe_reg_read(stmpe, irqen_reg);
349		if (ret < 0)
350			return;
351		irqen = !!(ret & mask);
352
353		seq_printf(s, " gpio-%-3d (%-20.20s) in  %s %13s %13s %25s %25s",
354			   gpio, label ?: "(none)",
355			   val ? "hi" : "lo",
356			   edge_det_values[edge_det],
357			   irqen ? "IRQ-enabled" : "IRQ-disabled",
358			   rise_values[rise],
359			   fall_values[fall]);
360	}
361}
362
363static void stmpe_dbg_show(struct seq_file *s, struct gpio_chip *gc)
364{
365	unsigned i;
366	unsigned gpio = gc->base;
367
368	for (i = 0; i < gc->ngpio; i++, gpio++) {
369		stmpe_dbg_show_one(s, gc, i, gpio);
370		seq_putc(s, '\n');
371	}
372}
373
374static const struct irq_chip stmpe_gpio_irq_chip = {
375	.name			= "stmpe-gpio",
376	.irq_bus_lock		= stmpe_gpio_irq_lock,
377	.irq_bus_sync_unlock	= stmpe_gpio_irq_sync_unlock,
378	.irq_mask		= stmpe_gpio_irq_mask,
379	.irq_unmask		= stmpe_gpio_irq_unmask,
380	.irq_set_type		= stmpe_gpio_irq_set_type,
381	.flags			= IRQCHIP_IMMUTABLE,
382	GPIOCHIP_IRQ_RESOURCE_HELPERS,
383};
384
385#define MAX_GPIOS 24
386
387static irqreturn_t stmpe_gpio_irq(int irq, void *dev)
388{
389	struct stmpe_gpio *stmpe_gpio = dev;
390	struct stmpe *stmpe = stmpe_gpio->stmpe;
391	u8 statmsbreg;
392	int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8);
393	u8 status[DIV_ROUND_UP(MAX_GPIOS, 8)];
394	int ret;
395	int i;
396
397	/*
398	 * the stmpe_block_read() call below, imposes to set statmsbreg
399	 * with the register located at the lowest address. As STMPE1600
400	 * variant is the only one which respect registers address's order
401	 * (LSB regs located at lowest address than MSB ones) whereas all
402	 * the others have a registers layout with MSB located before the
403	 * LSB regs.
404	 */
405	if (stmpe->partnum == STMPE1600)
406		statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_LSB];
407	else
408		statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_MSB];
409
410	ret = stmpe_block_read(stmpe, statmsbreg, num_banks, status);
411	if (ret < 0)
412		return IRQ_NONE;
413
414	for (i = 0; i < num_banks; i++) {
415		int bank = (stmpe_gpio->stmpe->partnum == STMPE1600) ? i :
416			   num_banks - i - 1;
417		unsigned int enabled = stmpe_gpio->regs[REG_IE][bank];
418		unsigned int stat = status[i];
419
420		stat &= enabled;
421		if (!stat)
422			continue;
423
424		while (stat) {
425			int bit = __ffs(stat);
426			int line = bank * 8 + bit;
427			int child_irq = irq_find_mapping(stmpe_gpio->chip.irq.domain,
428							 line);
429
430			handle_nested_irq(child_irq);
431			stat &= ~BIT(bit);
432		}
433
434		/*
435		 * interrupt status register write has no effect on
436		 * 801/1801/1600, bits are cleared when read.
437		 * Edge detect register is not present on 801/1600/1801
438		 */
439		if (stmpe->partnum != STMPE801 && stmpe->partnum != STMPE1600 &&
440		    stmpe->partnum != STMPE1801) {
441			stmpe_reg_write(stmpe, statmsbreg + i, status[i]);
442			stmpe_reg_write(stmpe,
443					stmpe->regs[STMPE_IDX_GPEDR_MSB] + i,
444					status[i]);
445		}
446	}
447
448	return IRQ_HANDLED;
449}
450
451static void stmpe_init_irq_valid_mask(struct gpio_chip *gc,
452				      unsigned long *valid_mask,
453				      unsigned int ngpios)
454{
455	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
456	int i;
457
458	if (!stmpe_gpio->norequest_mask)
459		return;
460
461	/* Forbid unused lines to be mapped as IRQs */
462	for (i = 0; i < sizeof(u32); i++) {
463		if (stmpe_gpio->norequest_mask & BIT(i))
464			clear_bit(i, valid_mask);
465	}
466}
467
468static void stmpe_gpio_disable(void *stmpe)
469{
470	stmpe_disable(stmpe, STMPE_BLOCK_GPIO);
471}
472
473static int stmpe_gpio_probe(struct platform_device *pdev)
474{
475	struct device *dev = &pdev->dev;
476	struct stmpe *stmpe = dev_get_drvdata(dev->parent);
477	struct stmpe_gpio *stmpe_gpio;
478	int ret, irq;
 
479
480	if (stmpe->num_gpios > MAX_GPIOS) {
481		dev_err(dev, "Need to increase maximum GPIO number\n");
482		return -EINVAL;
483	}
484
485	stmpe_gpio = devm_kzalloc(dev, sizeof(*stmpe_gpio), GFP_KERNEL);
486	if (!stmpe_gpio)
487		return -ENOMEM;
488
489	mutex_init(&stmpe_gpio->irq_lock);
490
 
491	stmpe_gpio->stmpe = stmpe;
492	stmpe_gpio->chip = template_chip;
493	stmpe_gpio->chip.ngpio = stmpe->num_gpios;
494	stmpe_gpio->chip.parent = dev;
 
495	stmpe_gpio->chip.base = -1;
496
497	if (IS_ENABLED(CONFIG_DEBUG_FS))
498                stmpe_gpio->chip.dbg_show = stmpe_dbg_show;
499
500	device_property_read_u32(dev, "st,norequest-mask", &stmpe_gpio->norequest_mask);
 
 
 
 
 
 
 
 
501
502	ret = stmpe_enable(stmpe, STMPE_BLOCK_GPIO);
503	if (ret)
504		return ret;
505
506	ret = devm_add_action_or_reset(dev, stmpe_gpio_disable, stmpe);
507	if (ret)
508		return ret;
 
 
509
510	irq = platform_get_irq(pdev, 0);
511	if (irq > 0) {
512		struct gpio_irq_chip *girq;
 
 
 
 
 
 
 
 
513
514		ret = devm_request_threaded_irq(dev, irq, NULL, stmpe_gpio_irq,
515						IRQF_ONESHOT, "stmpe-gpio", stmpe_gpio);
516		if (ret)
517			return dev_err_probe(dev, ret, "unable to register IRQ handler\n");
518
519		girq = &stmpe_gpio->chip.irq;
520		gpio_irq_chip_set_chip(girq, &stmpe_gpio_irq_chip);
521		/* This will let us handle the parent IRQ in the driver */
522		girq->parent_handler = NULL;
523		girq->num_parents = 0;
524		girq->parents = NULL;
525		girq->default_type = IRQ_TYPE_NONE;
526		girq->handler = handle_simple_irq;
527		girq->threaded = true;
528		girq->init_valid_mask = stmpe_init_irq_valid_mask;
 
 
 
 
529	}
530
531	return devm_gpiochip_add_data(dev, &stmpe_gpio->chip, stmpe_gpio);
 
 
 
 
 
 
 
 
 
532}
533
534static struct platform_driver stmpe_gpio_driver = {
535	.driver = {
536		.suppress_bind_attrs	= true,
537		.name			= "stmpe-gpio",
538	},
539	.probe		= stmpe_gpio_probe,
540};
541
542static int __init stmpe_gpio_init(void)
543{
544	return platform_driver_register(&stmpe_gpio_driver);
545}
546subsys_initcall(stmpe_gpio_init);
v4.10.11
 
  1/*
  2 * Copyright (C) ST-Ericsson SA 2010
  3 *
  4 * License Terms: GNU General Public License, version 2
  5 * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
  6 */
  7
 
 
 
  8#include <linux/init.h>
  9#include <linux/platform_device.h>
 10#include <linux/slab.h>
 11#include <linux/gpio.h>
 12#include <linux/interrupt.h>
 13#include <linux/of.h>
 14#include <linux/mfd/stmpe.h>
 
 
 15#include <linux/seq_file.h>
 16#include <linux/bitops.h>
 17
 18/*
 19 * These registers are modified under the irq bus lock and cached to avoid
 20 * unnecessary writes in bus_sync_unlock.
 21 */
 22enum { REG_RE, REG_FE, REG_IE };
 23
 24enum { LSB, CSB, MSB };
 25
 26#define CACHE_NR_REGS	3
 27/* No variant has more than 24 GPIOs */
 28#define CACHE_NR_BANKS	(24 / 8)
 29
 30struct stmpe_gpio {
 31	struct gpio_chip chip;
 32	struct stmpe *stmpe;
 33	struct device *dev;
 34	struct mutex irq_lock;
 35	u32 norequest_mask;
 36	/* Caches of interrupt control registers for bus_lock */
 37	u8 regs[CACHE_NR_REGS][CACHE_NR_BANKS];
 38	u8 oldregs[CACHE_NR_REGS][CACHE_NR_BANKS];
 39};
 40
 41static int stmpe_gpio_get(struct gpio_chip *chip, unsigned offset)
 42{
 43	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
 44	struct stmpe *stmpe = stmpe_gpio->stmpe;
 45	u8 reg = stmpe->regs[STMPE_IDX_GPMR_LSB + (offset / 8)];
 46	u8 mask = BIT(offset % 8);
 47	int ret;
 48
 49	ret = stmpe_reg_read(stmpe, reg);
 50	if (ret < 0)
 51		return ret;
 52
 53	return !!(ret & mask);
 54}
 55
 56static void stmpe_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
 57{
 58	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
 59	struct stmpe *stmpe = stmpe_gpio->stmpe;
 60	int which = val ? STMPE_IDX_GPSR_LSB : STMPE_IDX_GPCR_LSB;
 61	u8 reg = stmpe->regs[which + (offset / 8)];
 62	u8 mask = BIT(offset % 8);
 63
 64	/*
 65	 * Some variants have single register for gpio set/clear functionality.
 66	 * For them we need to write 0 to clear and 1 to set.
 67	 */
 68	if (stmpe->regs[STMPE_IDX_GPSR_LSB] == stmpe->regs[STMPE_IDX_GPCR_LSB])
 69		stmpe_set_bits(stmpe, reg, mask, val ? mask : 0);
 70	else
 71		stmpe_reg_write(stmpe, reg, mask);
 72}
 73
 74static int stmpe_gpio_get_direction(struct gpio_chip *chip,
 75				    unsigned offset)
 76{
 77	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
 78	struct stmpe *stmpe = stmpe_gpio->stmpe;
 79	u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB] - (offset / 8);
 80	u8 mask = BIT(offset % 8);
 81	int ret;
 82
 83	ret = stmpe_reg_read(stmpe, reg);
 84	if (ret < 0)
 85		return ret;
 86
 87	return !(ret & mask);
 
 
 
 88}
 89
 90static int stmpe_gpio_direction_output(struct gpio_chip *chip,
 91					 unsigned offset, int val)
 92{
 93	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
 94	struct stmpe *stmpe = stmpe_gpio->stmpe;
 95	u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)];
 96	u8 mask = BIT(offset % 8);
 97
 98	stmpe_gpio_set(chip, offset, val);
 99
100	return stmpe_set_bits(stmpe, reg, mask, mask);
101}
102
103static int stmpe_gpio_direction_input(struct gpio_chip *chip,
104					unsigned offset)
105{
106	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
107	struct stmpe *stmpe = stmpe_gpio->stmpe;
108	u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)];
109	u8 mask = BIT(offset % 8);
110
111	return stmpe_set_bits(stmpe, reg, mask, 0);
112}
113
114static int stmpe_gpio_request(struct gpio_chip *chip, unsigned offset)
115{
116	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
117	struct stmpe *stmpe = stmpe_gpio->stmpe;
118
119	if (stmpe_gpio->norequest_mask & BIT(offset))
120		return -EINVAL;
121
122	return stmpe_set_altfunc(stmpe, BIT(offset), STMPE_BLOCK_GPIO);
123}
124
125static const struct gpio_chip template_chip = {
126	.label			= "stmpe",
127	.owner			= THIS_MODULE,
128	.get_direction		= stmpe_gpio_get_direction,
129	.direction_input	= stmpe_gpio_direction_input,
130	.get			= stmpe_gpio_get,
131	.direction_output	= stmpe_gpio_direction_output,
132	.set			= stmpe_gpio_set,
133	.request		= stmpe_gpio_request,
134	.can_sleep		= true,
135};
136
137static int stmpe_gpio_irq_set_type(struct irq_data *d, unsigned int type)
138{
139	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
140	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
141	int offset = d->hwirq;
142	int regoffset = offset / 8;
143	int mask = BIT(offset % 8);
144
145	if (type & IRQ_TYPE_LEVEL_LOW || type & IRQ_TYPE_LEVEL_HIGH)
146		return -EINVAL;
147
148	/* STMPE801 and STMPE 1600 don't have RE and FE registers */
149	if (stmpe_gpio->stmpe->partnum == STMPE801 ||
150	    stmpe_gpio->stmpe->partnum == STMPE1600)
151		return 0;
152
153	if (type & IRQ_TYPE_EDGE_RISING)
154		stmpe_gpio->regs[REG_RE][regoffset] |= mask;
155	else
156		stmpe_gpio->regs[REG_RE][regoffset] &= ~mask;
157
158	if (type & IRQ_TYPE_EDGE_FALLING)
159		stmpe_gpio->regs[REG_FE][regoffset] |= mask;
160	else
161		stmpe_gpio->regs[REG_FE][regoffset] &= ~mask;
162
163	return 0;
164}
165
166static void stmpe_gpio_irq_lock(struct irq_data *d)
167{
168	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
169	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
170
171	mutex_lock(&stmpe_gpio->irq_lock);
172}
173
174static void stmpe_gpio_irq_sync_unlock(struct irq_data *d)
175{
176	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
177	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
178	struct stmpe *stmpe = stmpe_gpio->stmpe;
179	int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8);
180	static const u8 regmap[CACHE_NR_REGS][CACHE_NR_BANKS] = {
181		[REG_RE][LSB] = STMPE_IDX_GPRER_LSB,
182		[REG_RE][CSB] = STMPE_IDX_GPRER_CSB,
183		[REG_RE][MSB] = STMPE_IDX_GPRER_MSB,
184		[REG_FE][LSB] = STMPE_IDX_GPFER_LSB,
185		[REG_FE][CSB] = STMPE_IDX_GPFER_CSB,
186		[REG_FE][MSB] = STMPE_IDX_GPFER_MSB,
187		[REG_IE][LSB] = STMPE_IDX_IEGPIOR_LSB,
188		[REG_IE][CSB] = STMPE_IDX_IEGPIOR_CSB,
189		[REG_IE][MSB] = STMPE_IDX_IEGPIOR_MSB,
190	};
191	int i, j;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
192
193	for (i = 0; i < CACHE_NR_REGS; i++) {
194		/* STMPE801 and STMPE1600 don't have RE and FE registers */
195		if ((stmpe->partnum == STMPE801 ||
196		     stmpe->partnum == STMPE1600) &&
197		     (i != REG_IE))
198			continue;
199
200		for (j = 0; j < num_banks; j++) {
201			u8 old = stmpe_gpio->oldregs[i][j];
202			u8 new = stmpe_gpio->regs[i][j];
203
204			if (new == old)
205				continue;
206
207			stmpe_gpio->oldregs[i][j] = new;
208			stmpe_reg_write(stmpe, stmpe->regs[regmap[i][j]], new);
209		}
210	}
211
 
212	mutex_unlock(&stmpe_gpio->irq_lock);
213}
214
215static void stmpe_gpio_irq_mask(struct irq_data *d)
216{
217	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
218	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
219	int offset = d->hwirq;
220	int regoffset = offset / 8;
221	int mask = BIT(offset % 8);
222
223	stmpe_gpio->regs[REG_IE][regoffset] &= ~mask;
 
224}
225
226static void stmpe_gpio_irq_unmask(struct irq_data *d)
227{
228	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
229	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
230	struct stmpe *stmpe = stmpe_gpio->stmpe;
231	int offset = d->hwirq;
232	int regoffset = offset / 8;
233	int mask = BIT(offset % 8);
234
 
235	stmpe_gpio->regs[REG_IE][regoffset] |= mask;
236
237	/*
238	 * STMPE1600 workaround: to be able to get IRQ from pins,
239	 * a read must be done on GPMR register, or a write in
240	 * GPSR or GPCR registers
241	 */
242	if (stmpe->partnum == STMPE1600)
243		stmpe_reg_read(stmpe,
244			       stmpe->regs[STMPE_IDX_GPMR_LSB + regoffset]);
245}
246
247static void stmpe_dbg_show_one(struct seq_file *s,
248			       struct gpio_chip *gc,
249			       unsigned offset, unsigned gpio)
250{
251	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
252	struct stmpe *stmpe = stmpe_gpio->stmpe;
253	const char *label = gpiochip_is_requested(gc, offset);
254	bool val = !!stmpe_gpio_get(gc, offset);
255	u8 bank = offset / 8;
256	u8 dir_reg = stmpe->regs[STMPE_IDX_GPDR_LSB + bank];
257	u8 mask = BIT(offset % 8);
258	int ret;
259	u8 dir;
260
 
 
 
 
261	ret = stmpe_reg_read(stmpe, dir_reg);
262	if (ret < 0)
263		return;
264	dir = !!(ret & mask);
265
266	if (dir) {
267		seq_printf(s, " gpio-%-3d (%-20.20s) out %s",
268			   gpio, label ?: "(none)",
269			   val ? "hi" : "lo");
270	} else {
271		u8 edge_det_reg;
272		u8 rise_reg;
273		u8 fall_reg;
274		u8 irqen_reg;
275
276		char *edge_det_values[] = {"edge-inactive",
277					   "edge-asserted",
278					   "not-supported"};
279		char *rise_values[] = {"no-rising-edge-detection",
280				       "rising-edge-detection",
281				       "not-supported"};
282		char *fall_values[] = {"no-falling-edge-detection",
283				       "falling-edge-detection",
284				       "not-supported"};
 
 
 
 
 
 
285		#define NOT_SUPPORTED_IDX 2
286		u8 edge_det = NOT_SUPPORTED_IDX;
287		u8 rise = NOT_SUPPORTED_IDX;
288		u8 fall = NOT_SUPPORTED_IDX;
289		bool irqen;
290
291		switch (stmpe->partnum) {
292		case STMPE610:
293		case STMPE811:
294		case STMPE1601:
295		case STMPE2401:
296		case STMPE2403:
297			edge_det_reg = stmpe->regs[STMPE_IDX_GPEDR_LSB + bank];
298			ret = stmpe_reg_read(stmpe, edge_det_reg);
299			if (ret < 0)
300				return;
301			edge_det = !!(ret & mask);
302
303		case STMPE1801:
304			rise_reg = stmpe->regs[STMPE_IDX_GPRER_LSB + bank];
305			fall_reg = stmpe->regs[STMPE_IDX_GPFER_LSB + bank];
306
307			ret = stmpe_reg_read(stmpe, rise_reg);
308			if (ret < 0)
309				return;
310			rise = !!(ret & mask);
311			ret = stmpe_reg_read(stmpe, fall_reg);
312			if (ret < 0)
313				return;
314			fall = !!(ret & mask);
315
316		case STMPE801:
317		case STMPE1600:
318			irqen_reg = stmpe->regs[STMPE_IDX_IEGPIOR_LSB + bank];
319			break;
320
321		default:
322			return;
323		}
324
325		ret = stmpe_reg_read(stmpe, irqen_reg);
326		if (ret < 0)
327			return;
328		irqen = !!(ret & mask);
329
330		seq_printf(s, " gpio-%-3d (%-20.20s) in  %s %13s %13s %25s %25s",
331			   gpio, label ?: "(none)",
332			   val ? "hi" : "lo",
333			   edge_det_values[edge_det],
334			   irqen ? "IRQ-enabled" : "IRQ-disabled",
335			   rise_values[rise],
336			   fall_values[fall]);
337	}
338}
339
340static void stmpe_dbg_show(struct seq_file *s, struct gpio_chip *gc)
341{
342	unsigned i;
343	unsigned gpio = gc->base;
344
345	for (i = 0; i < gc->ngpio; i++, gpio++) {
346		stmpe_dbg_show_one(s, gc, i, gpio);
347		seq_printf(s, "\n");
348	}
349}
350
351static struct irq_chip stmpe_gpio_irq_chip = {
352	.name			= "stmpe-gpio",
353	.irq_bus_lock		= stmpe_gpio_irq_lock,
354	.irq_bus_sync_unlock	= stmpe_gpio_irq_sync_unlock,
355	.irq_mask		= stmpe_gpio_irq_mask,
356	.irq_unmask		= stmpe_gpio_irq_unmask,
357	.irq_set_type		= stmpe_gpio_irq_set_type,
 
 
358};
359
 
 
360static irqreturn_t stmpe_gpio_irq(int irq, void *dev)
361{
362	struct stmpe_gpio *stmpe_gpio = dev;
363	struct stmpe *stmpe = stmpe_gpio->stmpe;
364	u8 statmsbreg;
365	int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8);
366	u8 status[num_banks];
367	int ret;
368	int i;
369
370	/*
371	 * the stmpe_block_read() call below, imposes to set statmsbreg
372	 * with the register located at the lowest address. As STMPE1600
373	 * variant is the only one which respect registers address's order
374	 * (LSB regs located at lowest address than MSB ones) whereas all
375	 * the others have a registers layout with MSB located before the
376	 * LSB regs.
377	 */
378	if (stmpe->partnum == STMPE1600)
379		statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_LSB];
380	else
381		statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_MSB];
382
383	ret = stmpe_block_read(stmpe, statmsbreg, num_banks, status);
384	if (ret < 0)
385		return IRQ_NONE;
386
387	for (i = 0; i < num_banks; i++) {
388		int bank = (stmpe_gpio->stmpe->partnum == STMPE1600) ? i :
389			   num_banks - i - 1;
390		unsigned int enabled = stmpe_gpio->regs[REG_IE][bank];
391		unsigned int stat = status[i];
392
393		stat &= enabled;
394		if (!stat)
395			continue;
396
397		while (stat) {
398			int bit = __ffs(stat);
399			int line = bank * 8 + bit;
400			int child_irq = irq_find_mapping(stmpe_gpio->chip.irqdomain,
401							 line);
402
403			handle_nested_irq(child_irq);
404			stat &= ~BIT(bit);
405		}
406
407		/*
408		 * interrupt status register write has no effect on
409		 * 801/1801/1600, bits are cleared when read.
410		 * Edge detect register is not present on 801/1600/1801
411		 */
412		if (stmpe->partnum != STMPE801 && stmpe->partnum != STMPE1600 &&
413		    stmpe->partnum != STMPE1801) {
414			stmpe_reg_write(stmpe, statmsbreg + i, status[i]);
415			stmpe_reg_write(stmpe,
416					stmpe->regs[STMPE_IDX_GPEDR_MSB] + i,
417					status[i]);
418		}
419	}
420
421	return IRQ_HANDLED;
422}
423
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
424static int stmpe_gpio_probe(struct platform_device *pdev)
425{
426	struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
427	struct device_node *np = pdev->dev.of_node;
428	struct stmpe_gpio *stmpe_gpio;
429	int ret;
430	int irq = 0;
431
432	irq = platform_get_irq(pdev, 0);
 
 
 
433
434	stmpe_gpio = kzalloc(sizeof(struct stmpe_gpio), GFP_KERNEL);
435	if (!stmpe_gpio)
436		return -ENOMEM;
437
438	mutex_init(&stmpe_gpio->irq_lock);
439
440	stmpe_gpio->dev = &pdev->dev;
441	stmpe_gpio->stmpe = stmpe;
442	stmpe_gpio->chip = template_chip;
443	stmpe_gpio->chip.ngpio = stmpe->num_gpios;
444	stmpe_gpio->chip.parent = &pdev->dev;
445	stmpe_gpio->chip.of_node = np;
446	stmpe_gpio->chip.base = -1;
447
448	if (IS_ENABLED(CONFIG_DEBUG_FS))
449                stmpe_gpio->chip.dbg_show = stmpe_dbg_show;
450
451	of_property_read_u32(np, "st,norequest-mask",
452			&stmpe_gpio->norequest_mask);
453	if (stmpe_gpio->norequest_mask)
454		stmpe_gpio->chip.irq_need_valid_mask = true;
455
456	if (irq < 0)
457		dev_info(&pdev->dev,
458			"device configured in no-irq mode: "
459			"irqs are not available\n");
460
461	ret = stmpe_enable(stmpe, STMPE_BLOCK_GPIO);
462	if (ret)
463		goto out_free;
464
465	ret = gpiochip_add_data(&stmpe_gpio->chip, stmpe_gpio);
466	if (ret) {
467		dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret);
468		goto out_disable;
469	}
470
 
471	if (irq > 0) {
472		ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
473				stmpe_gpio_irq, IRQF_ONESHOT,
474				"stmpe-gpio", stmpe_gpio);
475		if (ret) {
476			dev_err(&pdev->dev, "unable to get irq: %d\n", ret);
477			goto out_disable;
478		}
479		if (stmpe_gpio->norequest_mask) {
480			int i;
481
482			/* Forbid unused lines to be mapped as IRQs */
483			for (i = 0; i < sizeof(u32); i++)
484				if (stmpe_gpio->norequest_mask & BIT(i))
485					clear_bit(i, stmpe_gpio->chip.irq_valid_mask);
486		}
487		ret =  gpiochip_irqchip_add_nested(&stmpe_gpio->chip,
488						   &stmpe_gpio_irq_chip,
489						   0,
490						   handle_simple_irq,
491						   IRQ_TYPE_NONE);
492		if (ret) {
493			dev_err(&pdev->dev,
494				"could not connect irqchip to gpiochip\n");
495			goto out_disable;
496		}
497
498		gpiochip_set_nested_irqchip(&stmpe_gpio->chip,
499					    &stmpe_gpio_irq_chip,
500					    irq);
501	}
502
503	platform_set_drvdata(pdev, stmpe_gpio);
504
505	return 0;
506
507out_disable:
508	stmpe_disable(stmpe, STMPE_BLOCK_GPIO);
509	gpiochip_remove(&stmpe_gpio->chip);
510out_free:
511	kfree(stmpe_gpio);
512	return ret;
513}
514
515static struct platform_driver stmpe_gpio_driver = {
516	.driver = {
517		.suppress_bind_attrs	= true,
518		.name			= "stmpe-gpio",
519	},
520	.probe		= stmpe_gpio_probe,
521};
522
523static int __init stmpe_gpio_init(void)
524{
525	return platform_driver_register(&stmpe_gpio_driver);
526}
527subsys_initcall(stmpe_gpio_init);