Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Intel E3-1200
4 * Copyright (C) 2014 Jason Baron <jbaron@akamai.com>
5 *
6 * Support for the E3-1200 processor family. Heavily based on previous
7 * Intel EDAC drivers.
8 *
9 * Since the DRAM controller is on the cpu chip, we can use its PCI device
10 * id to identify these processors.
11 *
12 * PCI DRAM controller device ids (Taken from The PCI ID Repository - https://pci-ids.ucw.cz/)
13 *
14 * 0108: Xeon E3-1200 Processor Family DRAM Controller
15 * 010c: Xeon E3-1200/2nd Generation Core Processor Family DRAM Controller
16 * 0150: Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller
17 * 0158: Xeon E3-1200 v2/Ivy Bridge DRAM Controller
18 * 015c: Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller
19 * 0c04: Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller
20 * 0c08: Xeon E3-1200 v3 Processor DRAM Controller
21 * 1918: Xeon E3-1200 v5 Skylake Host Bridge/DRAM Registers
22 * 590f: Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers
23 * 5918: Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers
24 * 190f: 6th Gen Core Dual-Core Processor Host Bridge/DRAM Registers
25 * 191f: 6th Gen Core Quad-Core Processor Host Bridge/DRAM Registers
26 * 3e..: 8th/9th Gen Core Processor Host Bridge/DRAM Registers
27 *
28 * Based on Intel specification:
29 * https://www.intel.com/content/dam/www/public/us/en/documents/datasheets/xeon-e3-1200v3-vol-2-datasheet.pdf
30 * http://www.intel.com/content/www/us/en/processors/xeon/xeon-e3-1200-family-vol-2-datasheet.html
31 * https://www.intel.com/content/dam/www/public/us/en/documents/datasheets/desktop-6th-gen-core-family-datasheet-vol-2.pdf
32 * https://www.intel.com/content/dam/www/public/us/en/documents/datasheets/xeon-e3-1200v6-vol-2-datasheet.pdf
33 * https://www.intel.com/content/www/us/en/processors/core/7th-gen-core-family-mobile-h-processor-lines-datasheet-vol-2.html
34 * https://www.intel.com/content/www/us/en/products/docs/processors/core/8th-gen-core-family-datasheet-vol-2.html
35 *
36 * According to the above datasheet (p.16):
37 * "
38 * 6. Software must not access B0/D0/F0 32-bit memory-mapped registers with
39 * requests that cross a DW boundary.
40 * "
41 *
42 * Thus, we make use of the explicit: lo_hi_readq(), which breaks the readq into
43 * 2 readl() calls. This restriction may be lifted in subsequent chip releases,
44 * but lo_hi_readq() ensures that we are safe across all e3-1200 processors.
45 */
46
47#include <linux/module.h>
48#include <linux/init.h>
49#include <linux/pci.h>
50#include <linux/pci_ids.h>
51#include <linux/edac.h>
52
53#include <linux/io-64-nonatomic-lo-hi.h>
54#include "edac_module.h"
55
56#define EDAC_MOD_STR "ie31200_edac"
57
58#define ie31200_printk(level, fmt, arg...) \
59 edac_printk(level, "ie31200", fmt, ##arg)
60
61#define PCI_DEVICE_ID_INTEL_IE31200_HB_1 0x0108
62#define PCI_DEVICE_ID_INTEL_IE31200_HB_2 0x010c
63#define PCI_DEVICE_ID_INTEL_IE31200_HB_3 0x0150
64#define PCI_DEVICE_ID_INTEL_IE31200_HB_4 0x0158
65#define PCI_DEVICE_ID_INTEL_IE31200_HB_5 0x015c
66#define PCI_DEVICE_ID_INTEL_IE31200_HB_6 0x0c04
67#define PCI_DEVICE_ID_INTEL_IE31200_HB_7 0x0c08
68#define PCI_DEVICE_ID_INTEL_IE31200_HB_8 0x190F
69#define PCI_DEVICE_ID_INTEL_IE31200_HB_9 0x1918
70#define PCI_DEVICE_ID_INTEL_IE31200_HB_10 0x191F
71#define PCI_DEVICE_ID_INTEL_IE31200_HB_11 0x590f
72#define PCI_DEVICE_ID_INTEL_IE31200_HB_12 0x5918
73
74/* Coffee Lake-S */
75#define PCI_DEVICE_ID_INTEL_IE31200_HB_CFL_MASK 0x3e00
76#define PCI_DEVICE_ID_INTEL_IE31200_HB_CFL_1 0x3e0f
77#define PCI_DEVICE_ID_INTEL_IE31200_HB_CFL_2 0x3e18
78#define PCI_DEVICE_ID_INTEL_IE31200_HB_CFL_3 0x3e1f
79#define PCI_DEVICE_ID_INTEL_IE31200_HB_CFL_4 0x3e30
80#define PCI_DEVICE_ID_INTEL_IE31200_HB_CFL_5 0x3e31
81#define PCI_DEVICE_ID_INTEL_IE31200_HB_CFL_6 0x3e32
82#define PCI_DEVICE_ID_INTEL_IE31200_HB_CFL_7 0x3e33
83#define PCI_DEVICE_ID_INTEL_IE31200_HB_CFL_8 0x3ec2
84#define PCI_DEVICE_ID_INTEL_IE31200_HB_CFL_9 0x3ec6
85#define PCI_DEVICE_ID_INTEL_IE31200_HB_CFL_10 0x3eca
86
87/* Test if HB is for Skylake or later. */
88#define DEVICE_ID_SKYLAKE_OR_LATER(did) \
89 (((did) == PCI_DEVICE_ID_INTEL_IE31200_HB_8) || \
90 ((did) == PCI_DEVICE_ID_INTEL_IE31200_HB_9) || \
91 ((did) == PCI_DEVICE_ID_INTEL_IE31200_HB_10) || \
92 ((did) == PCI_DEVICE_ID_INTEL_IE31200_HB_11) || \
93 ((did) == PCI_DEVICE_ID_INTEL_IE31200_HB_12) || \
94 (((did) & PCI_DEVICE_ID_INTEL_IE31200_HB_CFL_MASK) == \
95 PCI_DEVICE_ID_INTEL_IE31200_HB_CFL_MASK))
96
97#define IE31200_DIMMS 4
98#define IE31200_RANKS 8
99#define IE31200_RANKS_PER_CHANNEL 4
100#define IE31200_DIMMS_PER_CHANNEL 2
101#define IE31200_CHANNELS 2
102
103/* Intel IE31200 register addresses - device 0 function 0 - DRAM Controller */
104#define IE31200_MCHBAR_LOW 0x48
105#define IE31200_MCHBAR_HIGH 0x4c
106#define IE31200_MCHBAR_MASK GENMASK_ULL(38, 15)
107#define IE31200_MMR_WINDOW_SIZE BIT(15)
108
109/*
110 * Error Status Register (16b)
111 *
112 * 15 reserved
113 * 14 Isochronous TBWRR Run Behind FIFO Full
114 * (ITCV)
115 * 13 Isochronous TBWRR Run Behind FIFO Put
116 * (ITSTV)
117 * 12 reserved
118 * 11 MCH Thermal Sensor Event
119 * for SMI/SCI/SERR (GTSE)
120 * 10 reserved
121 * 9 LOCK to non-DRAM Memory Flag (LCKF)
122 * 8 reserved
123 * 7 DRAM Throttle Flag (DTF)
124 * 6:2 reserved
125 * 1 Multi-bit DRAM ECC Error Flag (DMERR)
126 * 0 Single-bit DRAM ECC Error Flag (DSERR)
127 */
128#define IE31200_ERRSTS 0xc8
129#define IE31200_ERRSTS_UE BIT(1)
130#define IE31200_ERRSTS_CE BIT(0)
131#define IE31200_ERRSTS_BITS (IE31200_ERRSTS_UE | IE31200_ERRSTS_CE)
132
133/*
134 * Channel 0 ECC Error Log (64b)
135 *
136 * 63:48 Error Column Address (ERRCOL)
137 * 47:32 Error Row Address (ERRROW)
138 * 31:29 Error Bank Address (ERRBANK)
139 * 28:27 Error Rank Address (ERRRANK)
140 * 26:24 reserved
141 * 23:16 Error Syndrome (ERRSYND)
142 * 15: 2 reserved
143 * 1 Multiple Bit Error Status (MERRSTS)
144 * 0 Correctable Error Status (CERRSTS)
145 */
146
147#define IE31200_C0ECCERRLOG 0x40c8
148#define IE31200_C1ECCERRLOG 0x44c8
149#define IE31200_C0ECCERRLOG_SKL 0x4048
150#define IE31200_C1ECCERRLOG_SKL 0x4448
151#define IE31200_ECCERRLOG_CE BIT(0)
152#define IE31200_ECCERRLOG_UE BIT(1)
153#define IE31200_ECCERRLOG_RANK_BITS GENMASK_ULL(28, 27)
154#define IE31200_ECCERRLOG_RANK_SHIFT 27
155#define IE31200_ECCERRLOG_SYNDROME_BITS GENMASK_ULL(23, 16)
156#define IE31200_ECCERRLOG_SYNDROME_SHIFT 16
157
158#define IE31200_ECCERRLOG_SYNDROME(log) \
159 ((log & IE31200_ECCERRLOG_SYNDROME_BITS) >> \
160 IE31200_ECCERRLOG_SYNDROME_SHIFT)
161
162#define IE31200_CAPID0 0xe4
163#define IE31200_CAPID0_PDCD BIT(4)
164#define IE31200_CAPID0_DDPCD BIT(6)
165#define IE31200_CAPID0_ECC BIT(1)
166
167#define IE31200_MAD_DIMM_0_OFFSET 0x5004
168#define IE31200_MAD_DIMM_0_OFFSET_SKL 0x500C
169#define IE31200_MAD_DIMM_SIZE GENMASK_ULL(7, 0)
170#define IE31200_MAD_DIMM_A_RANK BIT(17)
171#define IE31200_MAD_DIMM_A_RANK_SHIFT 17
172#define IE31200_MAD_DIMM_A_RANK_SKL BIT(10)
173#define IE31200_MAD_DIMM_A_RANK_SKL_SHIFT 10
174#define IE31200_MAD_DIMM_A_WIDTH BIT(19)
175#define IE31200_MAD_DIMM_A_WIDTH_SHIFT 19
176#define IE31200_MAD_DIMM_A_WIDTH_SKL GENMASK_ULL(9, 8)
177#define IE31200_MAD_DIMM_A_WIDTH_SKL_SHIFT 8
178
179/* Skylake reports 1GB increments, everything else is 256MB */
180#define IE31200_PAGES(n, skl) \
181 (n << (28 + (2 * skl) - PAGE_SHIFT))
182
183static int nr_channels;
184static struct pci_dev *mci_pdev;
185static int ie31200_registered = 1;
186
187struct ie31200_priv {
188 void __iomem *window;
189 void __iomem *c0errlog;
190 void __iomem *c1errlog;
191};
192
193enum ie31200_chips {
194 IE31200 = 0,
195};
196
197struct ie31200_dev_info {
198 const char *ctl_name;
199};
200
201struct ie31200_error_info {
202 u16 errsts;
203 u16 errsts2;
204 u64 eccerrlog[IE31200_CHANNELS];
205};
206
207static const struct ie31200_dev_info ie31200_devs[] = {
208 [IE31200] = {
209 .ctl_name = "IE31200"
210 },
211};
212
213struct dimm_data {
214 u8 size; /* in multiples of 256MB, except Skylake is 1GB */
215 u8 dual_rank : 1,
216 x16_width : 2; /* 0 means x8 width */
217};
218
219static int how_many_channels(struct pci_dev *pdev)
220{
221 int n_channels;
222 unsigned char capid0_2b; /* 2nd byte of CAPID0 */
223
224 pci_read_config_byte(pdev, IE31200_CAPID0 + 1, &capid0_2b);
225
226 /* check PDCD: Dual Channel Disable */
227 if (capid0_2b & IE31200_CAPID0_PDCD) {
228 edac_dbg(0, "In single channel mode\n");
229 n_channels = 1;
230 } else {
231 edac_dbg(0, "In dual channel mode\n");
232 n_channels = 2;
233 }
234
235 /* check DDPCD - check if both channels are filled */
236 if (capid0_2b & IE31200_CAPID0_DDPCD)
237 edac_dbg(0, "2 DIMMS per channel disabled\n");
238 else
239 edac_dbg(0, "2 DIMMS per channel enabled\n");
240
241 return n_channels;
242}
243
244static bool ecc_capable(struct pci_dev *pdev)
245{
246 unsigned char capid0_4b; /* 4th byte of CAPID0 */
247
248 pci_read_config_byte(pdev, IE31200_CAPID0 + 3, &capid0_4b);
249 if (capid0_4b & IE31200_CAPID0_ECC)
250 return false;
251 return true;
252}
253
254static int eccerrlog_row(u64 log)
255{
256 return ((log & IE31200_ECCERRLOG_RANK_BITS) >>
257 IE31200_ECCERRLOG_RANK_SHIFT);
258}
259
260static void ie31200_clear_error_info(struct mem_ctl_info *mci)
261{
262 /*
263 * Clear any error bits.
264 * (Yes, we really clear bits by writing 1 to them.)
265 */
266 pci_write_bits16(to_pci_dev(mci->pdev), IE31200_ERRSTS,
267 IE31200_ERRSTS_BITS, IE31200_ERRSTS_BITS);
268}
269
270static void ie31200_get_and_clear_error_info(struct mem_ctl_info *mci,
271 struct ie31200_error_info *info)
272{
273 struct pci_dev *pdev;
274 struct ie31200_priv *priv = mci->pvt_info;
275
276 pdev = to_pci_dev(mci->pdev);
277
278 /*
279 * This is a mess because there is no atomic way to read all the
280 * registers at once and the registers can transition from CE being
281 * overwritten by UE.
282 */
283 pci_read_config_word(pdev, IE31200_ERRSTS, &info->errsts);
284 if (!(info->errsts & IE31200_ERRSTS_BITS))
285 return;
286
287 info->eccerrlog[0] = lo_hi_readq(priv->c0errlog);
288 if (nr_channels == 2)
289 info->eccerrlog[1] = lo_hi_readq(priv->c1errlog);
290
291 pci_read_config_word(pdev, IE31200_ERRSTS, &info->errsts2);
292
293 /*
294 * If the error is the same for both reads then the first set
295 * of reads is valid. If there is a change then there is a CE
296 * with no info and the second set of reads is valid and
297 * should be UE info.
298 */
299 if ((info->errsts ^ info->errsts2) & IE31200_ERRSTS_BITS) {
300 info->eccerrlog[0] = lo_hi_readq(priv->c0errlog);
301 if (nr_channels == 2)
302 info->eccerrlog[1] =
303 lo_hi_readq(priv->c1errlog);
304 }
305
306 ie31200_clear_error_info(mci);
307}
308
309static void ie31200_process_error_info(struct mem_ctl_info *mci,
310 struct ie31200_error_info *info)
311{
312 int channel;
313 u64 log;
314
315 if (!(info->errsts & IE31200_ERRSTS_BITS))
316 return;
317
318 if ((info->errsts ^ info->errsts2) & IE31200_ERRSTS_BITS) {
319 edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0,
320 -1, -1, -1, "UE overwrote CE", "");
321 info->errsts = info->errsts2;
322 }
323
324 for (channel = 0; channel < nr_channels; channel++) {
325 log = info->eccerrlog[channel];
326 if (log & IE31200_ECCERRLOG_UE) {
327 edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
328 0, 0, 0,
329 eccerrlog_row(log),
330 channel, -1,
331 "ie31200 UE", "");
332 } else if (log & IE31200_ECCERRLOG_CE) {
333 edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
334 0, 0,
335 IE31200_ECCERRLOG_SYNDROME(log),
336 eccerrlog_row(log),
337 channel, -1,
338 "ie31200 CE", "");
339 }
340 }
341}
342
343static void ie31200_check(struct mem_ctl_info *mci)
344{
345 struct ie31200_error_info info;
346
347 ie31200_get_and_clear_error_info(mci, &info);
348 ie31200_process_error_info(mci, &info);
349}
350
351static void __iomem *ie31200_map_mchbar(struct pci_dev *pdev)
352{
353 union {
354 u64 mchbar;
355 struct {
356 u32 mchbar_low;
357 u32 mchbar_high;
358 };
359 } u;
360 void __iomem *window;
361
362 pci_read_config_dword(pdev, IE31200_MCHBAR_LOW, &u.mchbar_low);
363 pci_read_config_dword(pdev, IE31200_MCHBAR_HIGH, &u.mchbar_high);
364 u.mchbar &= IE31200_MCHBAR_MASK;
365
366 if (u.mchbar != (resource_size_t)u.mchbar) {
367 ie31200_printk(KERN_ERR, "mmio space beyond accessible range (0x%llx)\n",
368 (unsigned long long)u.mchbar);
369 return NULL;
370 }
371
372 window = ioremap(u.mchbar, IE31200_MMR_WINDOW_SIZE);
373 if (!window)
374 ie31200_printk(KERN_ERR, "Cannot map mmio space at 0x%llx\n",
375 (unsigned long long)u.mchbar);
376
377 return window;
378}
379
380static void __skl_populate_dimm_info(struct dimm_data *dd, u32 addr_decode,
381 int chan)
382{
383 dd->size = (addr_decode >> (chan << 4)) & IE31200_MAD_DIMM_SIZE;
384 dd->dual_rank = (addr_decode & (IE31200_MAD_DIMM_A_RANK_SKL << (chan << 4))) ? 1 : 0;
385 dd->x16_width = ((addr_decode & (IE31200_MAD_DIMM_A_WIDTH_SKL << (chan << 4))) >>
386 (IE31200_MAD_DIMM_A_WIDTH_SKL_SHIFT + (chan << 4)));
387}
388
389static void __populate_dimm_info(struct dimm_data *dd, u32 addr_decode,
390 int chan)
391{
392 dd->size = (addr_decode >> (chan << 3)) & IE31200_MAD_DIMM_SIZE;
393 dd->dual_rank = (addr_decode & (IE31200_MAD_DIMM_A_RANK << chan)) ? 1 : 0;
394 dd->x16_width = (addr_decode & (IE31200_MAD_DIMM_A_WIDTH << chan)) ? 1 : 0;
395}
396
397static void populate_dimm_info(struct dimm_data *dd, u32 addr_decode, int chan,
398 bool skl)
399{
400 if (skl)
401 __skl_populate_dimm_info(dd, addr_decode, chan);
402 else
403 __populate_dimm_info(dd, addr_decode, chan);
404}
405
406
407static int ie31200_probe1(struct pci_dev *pdev, int dev_idx)
408{
409 int i, j, ret;
410 struct mem_ctl_info *mci = NULL;
411 struct edac_mc_layer layers[2];
412 struct dimm_data dimm_info[IE31200_CHANNELS][IE31200_DIMMS_PER_CHANNEL];
413 void __iomem *window;
414 struct ie31200_priv *priv;
415 u32 addr_decode, mad_offset;
416
417 /*
418 * Kaby Lake, Coffee Lake seem to work like Skylake. Please re-visit
419 * this logic when adding new CPU support.
420 */
421 bool skl = DEVICE_ID_SKYLAKE_OR_LATER(pdev->device);
422
423 edac_dbg(0, "MC:\n");
424
425 if (!ecc_capable(pdev)) {
426 ie31200_printk(KERN_INFO, "No ECC support\n");
427 return -ENODEV;
428 }
429
430 nr_channels = how_many_channels(pdev);
431 layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
432 layers[0].size = IE31200_DIMMS;
433 layers[0].is_virt_csrow = true;
434 layers[1].type = EDAC_MC_LAYER_CHANNEL;
435 layers[1].size = nr_channels;
436 layers[1].is_virt_csrow = false;
437 mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers,
438 sizeof(struct ie31200_priv));
439 if (!mci)
440 return -ENOMEM;
441
442 window = ie31200_map_mchbar(pdev);
443 if (!window) {
444 ret = -ENODEV;
445 goto fail_free;
446 }
447
448 edac_dbg(3, "MC: init mci\n");
449 mci->pdev = &pdev->dev;
450 if (skl)
451 mci->mtype_cap = MEM_FLAG_DDR4;
452 else
453 mci->mtype_cap = MEM_FLAG_DDR3;
454 mci->edac_ctl_cap = EDAC_FLAG_SECDED;
455 mci->edac_cap = EDAC_FLAG_SECDED;
456 mci->mod_name = EDAC_MOD_STR;
457 mci->ctl_name = ie31200_devs[dev_idx].ctl_name;
458 mci->dev_name = pci_name(pdev);
459 mci->edac_check = ie31200_check;
460 mci->ctl_page_to_phys = NULL;
461 priv = mci->pvt_info;
462 priv->window = window;
463 if (skl) {
464 priv->c0errlog = window + IE31200_C0ECCERRLOG_SKL;
465 priv->c1errlog = window + IE31200_C1ECCERRLOG_SKL;
466 mad_offset = IE31200_MAD_DIMM_0_OFFSET_SKL;
467 } else {
468 priv->c0errlog = window + IE31200_C0ECCERRLOG;
469 priv->c1errlog = window + IE31200_C1ECCERRLOG;
470 mad_offset = IE31200_MAD_DIMM_0_OFFSET;
471 }
472
473 /* populate DIMM info */
474 for (i = 0; i < IE31200_CHANNELS; i++) {
475 addr_decode = readl(window + mad_offset +
476 (i * 4));
477 edac_dbg(0, "addr_decode: 0x%x\n", addr_decode);
478 for (j = 0; j < IE31200_DIMMS_PER_CHANNEL; j++) {
479 populate_dimm_info(&dimm_info[i][j], addr_decode, j,
480 skl);
481 edac_dbg(0, "size: 0x%x, rank: %d, width: %d\n",
482 dimm_info[i][j].size,
483 dimm_info[i][j].dual_rank,
484 dimm_info[i][j].x16_width);
485 }
486 }
487
488 /*
489 * The dram rank boundary (DRB) reg values are boundary addresses
490 * for each DRAM rank with a granularity of 64MB. DRB regs are
491 * cumulative; the last one will contain the total memory
492 * contained in all ranks.
493 */
494 for (i = 0; i < IE31200_DIMMS_PER_CHANNEL; i++) {
495 for (j = 0; j < IE31200_CHANNELS; j++) {
496 struct dimm_info *dimm;
497 unsigned long nr_pages;
498
499 nr_pages = IE31200_PAGES(dimm_info[j][i].size, skl);
500 if (nr_pages == 0)
501 continue;
502
503 if (dimm_info[j][i].dual_rank) {
504 nr_pages = nr_pages / 2;
505 dimm = edac_get_dimm(mci, (i * 2) + 1, j, 0);
506 dimm->nr_pages = nr_pages;
507 edac_dbg(0, "set nr pages: 0x%lx\n", nr_pages);
508 dimm->grain = 8; /* just a guess */
509 if (skl)
510 dimm->mtype = MEM_DDR4;
511 else
512 dimm->mtype = MEM_DDR3;
513 dimm->dtype = DEV_UNKNOWN;
514 dimm->edac_mode = EDAC_UNKNOWN;
515 }
516 dimm = edac_get_dimm(mci, i * 2, j, 0);
517 dimm->nr_pages = nr_pages;
518 edac_dbg(0, "set nr pages: 0x%lx\n", nr_pages);
519 dimm->grain = 8; /* same guess */
520 if (skl)
521 dimm->mtype = MEM_DDR4;
522 else
523 dimm->mtype = MEM_DDR3;
524 dimm->dtype = DEV_UNKNOWN;
525 dimm->edac_mode = EDAC_UNKNOWN;
526 }
527 }
528
529 ie31200_clear_error_info(mci);
530
531 if (edac_mc_add_mc(mci)) {
532 edac_dbg(3, "MC: failed edac_mc_add_mc()\n");
533 ret = -ENODEV;
534 goto fail_unmap;
535 }
536
537 /* get this far and it's successful */
538 edac_dbg(3, "MC: success\n");
539 return 0;
540
541fail_unmap:
542 iounmap(window);
543
544fail_free:
545 edac_mc_free(mci);
546
547 return ret;
548}
549
550static int ie31200_init_one(struct pci_dev *pdev,
551 const struct pci_device_id *ent)
552{
553 int rc;
554
555 edac_dbg(0, "MC:\n");
556 if (pci_enable_device(pdev) < 0)
557 return -EIO;
558 rc = ie31200_probe1(pdev, ent->driver_data);
559 if (rc == 0 && !mci_pdev)
560 mci_pdev = pci_dev_get(pdev);
561
562 return rc;
563}
564
565static void ie31200_remove_one(struct pci_dev *pdev)
566{
567 struct mem_ctl_info *mci;
568 struct ie31200_priv *priv;
569
570 edac_dbg(0, "\n");
571 pci_dev_put(mci_pdev);
572 mci_pdev = NULL;
573 mci = edac_mc_del_mc(&pdev->dev);
574 if (!mci)
575 return;
576 priv = mci->pvt_info;
577 iounmap(priv->window);
578 edac_mc_free(mci);
579}
580
581static const struct pci_device_id ie31200_pci_tbl[] = {
582 { PCI_VEND_DEV(INTEL, IE31200_HB_1), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 },
583 { PCI_VEND_DEV(INTEL, IE31200_HB_2), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 },
584 { PCI_VEND_DEV(INTEL, IE31200_HB_3), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 },
585 { PCI_VEND_DEV(INTEL, IE31200_HB_4), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 },
586 { PCI_VEND_DEV(INTEL, IE31200_HB_5), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 },
587 { PCI_VEND_DEV(INTEL, IE31200_HB_6), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 },
588 { PCI_VEND_DEV(INTEL, IE31200_HB_7), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 },
589 { PCI_VEND_DEV(INTEL, IE31200_HB_8), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 },
590 { PCI_VEND_DEV(INTEL, IE31200_HB_9), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 },
591 { PCI_VEND_DEV(INTEL, IE31200_HB_10), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 },
592 { PCI_VEND_DEV(INTEL, IE31200_HB_11), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 },
593 { PCI_VEND_DEV(INTEL, IE31200_HB_12), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 },
594 { PCI_VEND_DEV(INTEL, IE31200_HB_CFL_1), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 },
595 { PCI_VEND_DEV(INTEL, IE31200_HB_CFL_2), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 },
596 { PCI_VEND_DEV(INTEL, IE31200_HB_CFL_3), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 },
597 { PCI_VEND_DEV(INTEL, IE31200_HB_CFL_4), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 },
598 { PCI_VEND_DEV(INTEL, IE31200_HB_CFL_5), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 },
599 { PCI_VEND_DEV(INTEL, IE31200_HB_CFL_6), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 },
600 { PCI_VEND_DEV(INTEL, IE31200_HB_CFL_7), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 },
601 { PCI_VEND_DEV(INTEL, IE31200_HB_CFL_8), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 },
602 { PCI_VEND_DEV(INTEL, IE31200_HB_CFL_9), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 },
603 { PCI_VEND_DEV(INTEL, IE31200_HB_CFL_10), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 },
604 { 0, } /* 0 terminated list. */
605};
606MODULE_DEVICE_TABLE(pci, ie31200_pci_tbl);
607
608static struct pci_driver ie31200_driver = {
609 .name = EDAC_MOD_STR,
610 .probe = ie31200_init_one,
611 .remove = ie31200_remove_one,
612 .id_table = ie31200_pci_tbl,
613};
614
615static int __init ie31200_init(void)
616{
617 int pci_rc, i;
618
619 edac_dbg(3, "MC:\n");
620 /* Ensure that the OPSTATE is set correctly for POLL or NMI */
621 opstate_init();
622
623 pci_rc = pci_register_driver(&ie31200_driver);
624 if (pci_rc < 0)
625 goto fail0;
626
627 if (!mci_pdev) {
628 ie31200_registered = 0;
629 for (i = 0; ie31200_pci_tbl[i].vendor != 0; i++) {
630 mci_pdev = pci_get_device(ie31200_pci_tbl[i].vendor,
631 ie31200_pci_tbl[i].device,
632 NULL);
633 if (mci_pdev)
634 break;
635 }
636 if (!mci_pdev) {
637 edac_dbg(0, "ie31200 pci_get_device fail\n");
638 pci_rc = -ENODEV;
639 goto fail1;
640 }
641 pci_rc = ie31200_init_one(mci_pdev, &ie31200_pci_tbl[i]);
642 if (pci_rc < 0) {
643 edac_dbg(0, "ie31200 init fail\n");
644 pci_rc = -ENODEV;
645 goto fail1;
646 }
647 }
648 return 0;
649
650fail1:
651 pci_unregister_driver(&ie31200_driver);
652fail0:
653 pci_dev_put(mci_pdev);
654
655 return pci_rc;
656}
657
658static void __exit ie31200_exit(void)
659{
660 edac_dbg(3, "MC:\n");
661 pci_unregister_driver(&ie31200_driver);
662 if (!ie31200_registered)
663 ie31200_remove_one(mci_pdev);
664}
665
666module_init(ie31200_init);
667module_exit(ie31200_exit);
668
669MODULE_LICENSE("GPL");
670MODULE_AUTHOR("Jason Baron <jbaron@akamai.com>");
671MODULE_DESCRIPTION("MC support for Intel Processor E31200 memory hub controllers");
1/*
2 * Intel E3-1200
3 * Copyright (C) 2014 Jason Baron <jbaron@akamai.com>
4 *
5 * Support for the E3-1200 processor family. Heavily based on previous
6 * Intel EDAC drivers.
7 *
8 * Since the DRAM controller is on the cpu chip, we can use its PCI device
9 * id to identify these processors.
10 *
11 * PCI DRAM controller device ids (Taken from The PCI ID Repository - http://pci-ids.ucw.cz/)
12 *
13 * 0108: Xeon E3-1200 Processor Family DRAM Controller
14 * 010c: Xeon E3-1200/2nd Generation Core Processor Family DRAM Controller
15 * 0150: Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller
16 * 0158: Xeon E3-1200 v2/Ivy Bridge DRAM Controller
17 * 015c: Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller
18 * 0c04: Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller
19 * 0c08: Xeon E3-1200 v3 Processor DRAM Controller
20 * 1918: Xeon E3-1200 v5 Skylake Host Bridge/DRAM Registers
21 *
22 * Based on Intel specification:
23 * http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/xeon-e3-1200v3-vol-2-datasheet.pdf
24 * http://www.intel.com/content/www/us/en/processors/xeon/xeon-e3-1200-family-vol-2-datasheet.html
25 *
26 * According to the above datasheet (p.16):
27 * "
28 * 6. Software must not access B0/D0/F0 32-bit memory-mapped registers with
29 * requests that cross a DW boundary.
30 * "
31 *
32 * Thus, we make use of the explicit: lo_hi_readq(), which breaks the readq into
33 * 2 readl() calls. This restriction may be lifted in subsequent chip releases,
34 * but lo_hi_readq() ensures that we are safe across all e3-1200 processors.
35 */
36
37#include <linux/module.h>
38#include <linux/init.h>
39#include <linux/pci.h>
40#include <linux/pci_ids.h>
41#include <linux/edac.h>
42
43#include <linux/io-64-nonatomic-lo-hi.h>
44#include "edac_module.h"
45
46#define IE31200_REVISION "1.0"
47#define EDAC_MOD_STR "ie31200_edac"
48
49#define ie31200_printk(level, fmt, arg...) \
50 edac_printk(level, "ie31200", fmt, ##arg)
51
52#define PCI_DEVICE_ID_INTEL_IE31200_HB_1 0x0108
53#define PCI_DEVICE_ID_INTEL_IE31200_HB_2 0x010c
54#define PCI_DEVICE_ID_INTEL_IE31200_HB_3 0x0150
55#define PCI_DEVICE_ID_INTEL_IE31200_HB_4 0x0158
56#define PCI_DEVICE_ID_INTEL_IE31200_HB_5 0x015c
57#define PCI_DEVICE_ID_INTEL_IE31200_HB_6 0x0c04
58#define PCI_DEVICE_ID_INTEL_IE31200_HB_7 0x0c08
59#define PCI_DEVICE_ID_INTEL_IE31200_HB_8 0x1918
60
61#define IE31200_DIMMS 4
62#define IE31200_RANKS 8
63#define IE31200_RANKS_PER_CHANNEL 4
64#define IE31200_DIMMS_PER_CHANNEL 2
65#define IE31200_CHANNELS 2
66
67/* Intel IE31200 register addresses - device 0 function 0 - DRAM Controller */
68#define IE31200_MCHBAR_LOW 0x48
69#define IE31200_MCHBAR_HIGH 0x4c
70#define IE31200_MCHBAR_MASK GENMASK_ULL(38, 15)
71#define IE31200_MMR_WINDOW_SIZE BIT(15)
72
73/*
74 * Error Status Register (16b)
75 *
76 * 15 reserved
77 * 14 Isochronous TBWRR Run Behind FIFO Full
78 * (ITCV)
79 * 13 Isochronous TBWRR Run Behind FIFO Put
80 * (ITSTV)
81 * 12 reserved
82 * 11 MCH Thermal Sensor Event
83 * for SMI/SCI/SERR (GTSE)
84 * 10 reserved
85 * 9 LOCK to non-DRAM Memory Flag (LCKF)
86 * 8 reserved
87 * 7 DRAM Throttle Flag (DTF)
88 * 6:2 reserved
89 * 1 Multi-bit DRAM ECC Error Flag (DMERR)
90 * 0 Single-bit DRAM ECC Error Flag (DSERR)
91 */
92#define IE31200_ERRSTS 0xc8
93#define IE31200_ERRSTS_UE BIT(1)
94#define IE31200_ERRSTS_CE BIT(0)
95#define IE31200_ERRSTS_BITS (IE31200_ERRSTS_UE | IE31200_ERRSTS_CE)
96
97/*
98 * Channel 0 ECC Error Log (64b)
99 *
100 * 63:48 Error Column Address (ERRCOL)
101 * 47:32 Error Row Address (ERRROW)
102 * 31:29 Error Bank Address (ERRBANK)
103 * 28:27 Error Rank Address (ERRRANK)
104 * 26:24 reserved
105 * 23:16 Error Syndrome (ERRSYND)
106 * 15: 2 reserved
107 * 1 Multiple Bit Error Status (MERRSTS)
108 * 0 Correctable Error Status (CERRSTS)
109 */
110
111#define IE31200_C0ECCERRLOG 0x40c8
112#define IE31200_C1ECCERRLOG 0x44c8
113#define IE31200_C0ECCERRLOG_SKL 0x4048
114#define IE31200_C1ECCERRLOG_SKL 0x4448
115#define IE31200_ECCERRLOG_CE BIT(0)
116#define IE31200_ECCERRLOG_UE BIT(1)
117#define IE31200_ECCERRLOG_RANK_BITS GENMASK_ULL(28, 27)
118#define IE31200_ECCERRLOG_RANK_SHIFT 27
119#define IE31200_ECCERRLOG_SYNDROME_BITS GENMASK_ULL(23, 16)
120#define IE31200_ECCERRLOG_SYNDROME_SHIFT 16
121
122#define IE31200_ECCERRLOG_SYNDROME(log) \
123 ((log & IE31200_ECCERRLOG_SYNDROME_BITS) >> \
124 IE31200_ECCERRLOG_SYNDROME_SHIFT)
125
126#define IE31200_CAPID0 0xe4
127#define IE31200_CAPID0_PDCD BIT(4)
128#define IE31200_CAPID0_DDPCD BIT(6)
129#define IE31200_CAPID0_ECC BIT(1)
130
131#define IE31200_MAD_DIMM_0_OFFSET 0x5004
132#define IE31200_MAD_DIMM_0_OFFSET_SKL 0x500C
133#define IE31200_MAD_DIMM_SIZE GENMASK_ULL(7, 0)
134#define IE31200_MAD_DIMM_A_RANK BIT(17)
135#define IE31200_MAD_DIMM_A_RANK_SHIFT 17
136#define IE31200_MAD_DIMM_A_RANK_SKL BIT(10)
137#define IE31200_MAD_DIMM_A_RANK_SKL_SHIFT 10
138#define IE31200_MAD_DIMM_A_WIDTH BIT(19)
139#define IE31200_MAD_DIMM_A_WIDTH_SHIFT 19
140#define IE31200_MAD_DIMM_A_WIDTH_SKL GENMASK_ULL(9, 8)
141#define IE31200_MAD_DIMM_A_WIDTH_SKL_SHIFT 8
142
143/* Skylake reports 1GB increments, everything else is 256MB */
144#define IE31200_PAGES(n, skl) \
145 (n << (28 + (2 * skl) - PAGE_SHIFT))
146
147static int nr_channels;
148
149struct ie31200_priv {
150 void __iomem *window;
151 void __iomem *c0errlog;
152 void __iomem *c1errlog;
153};
154
155enum ie31200_chips {
156 IE31200 = 0,
157};
158
159struct ie31200_dev_info {
160 const char *ctl_name;
161};
162
163struct ie31200_error_info {
164 u16 errsts;
165 u16 errsts2;
166 u64 eccerrlog[IE31200_CHANNELS];
167};
168
169static const struct ie31200_dev_info ie31200_devs[] = {
170 [IE31200] = {
171 .ctl_name = "IE31200"
172 },
173};
174
175struct dimm_data {
176 u8 size; /* in multiples of 256MB, except Skylake is 1GB */
177 u8 dual_rank : 1,
178 x16_width : 2; /* 0 means x8 width */
179};
180
181static int how_many_channels(struct pci_dev *pdev)
182{
183 int n_channels;
184 unsigned char capid0_2b; /* 2nd byte of CAPID0 */
185
186 pci_read_config_byte(pdev, IE31200_CAPID0 + 1, &capid0_2b);
187
188 /* check PDCD: Dual Channel Disable */
189 if (capid0_2b & IE31200_CAPID0_PDCD) {
190 edac_dbg(0, "In single channel mode\n");
191 n_channels = 1;
192 } else {
193 edac_dbg(0, "In dual channel mode\n");
194 n_channels = 2;
195 }
196
197 /* check DDPCD - check if both channels are filled */
198 if (capid0_2b & IE31200_CAPID0_DDPCD)
199 edac_dbg(0, "2 DIMMS per channel disabled\n");
200 else
201 edac_dbg(0, "2 DIMMS per channel enabled\n");
202
203 return n_channels;
204}
205
206static bool ecc_capable(struct pci_dev *pdev)
207{
208 unsigned char capid0_4b; /* 4th byte of CAPID0 */
209
210 pci_read_config_byte(pdev, IE31200_CAPID0 + 3, &capid0_4b);
211 if (capid0_4b & IE31200_CAPID0_ECC)
212 return false;
213 return true;
214}
215
216static int eccerrlog_row(u64 log)
217{
218 return ((log & IE31200_ECCERRLOG_RANK_BITS) >>
219 IE31200_ECCERRLOG_RANK_SHIFT);
220}
221
222static void ie31200_clear_error_info(struct mem_ctl_info *mci)
223{
224 /*
225 * Clear any error bits.
226 * (Yes, we really clear bits by writing 1 to them.)
227 */
228 pci_write_bits16(to_pci_dev(mci->pdev), IE31200_ERRSTS,
229 IE31200_ERRSTS_BITS, IE31200_ERRSTS_BITS);
230}
231
232static void ie31200_get_and_clear_error_info(struct mem_ctl_info *mci,
233 struct ie31200_error_info *info)
234{
235 struct pci_dev *pdev;
236 struct ie31200_priv *priv = mci->pvt_info;
237
238 pdev = to_pci_dev(mci->pdev);
239
240 /*
241 * This is a mess because there is no atomic way to read all the
242 * registers at once and the registers can transition from CE being
243 * overwritten by UE.
244 */
245 pci_read_config_word(pdev, IE31200_ERRSTS, &info->errsts);
246 if (!(info->errsts & IE31200_ERRSTS_BITS))
247 return;
248
249 info->eccerrlog[0] = lo_hi_readq(priv->c0errlog);
250 if (nr_channels == 2)
251 info->eccerrlog[1] = lo_hi_readq(priv->c1errlog);
252
253 pci_read_config_word(pdev, IE31200_ERRSTS, &info->errsts2);
254
255 /*
256 * If the error is the same for both reads then the first set
257 * of reads is valid. If there is a change then there is a CE
258 * with no info and the second set of reads is valid and
259 * should be UE info.
260 */
261 if ((info->errsts ^ info->errsts2) & IE31200_ERRSTS_BITS) {
262 info->eccerrlog[0] = lo_hi_readq(priv->c0errlog);
263 if (nr_channels == 2)
264 info->eccerrlog[1] =
265 lo_hi_readq(priv->c1errlog);
266 }
267
268 ie31200_clear_error_info(mci);
269}
270
271static void ie31200_process_error_info(struct mem_ctl_info *mci,
272 struct ie31200_error_info *info)
273{
274 int channel;
275 u64 log;
276
277 if (!(info->errsts & IE31200_ERRSTS_BITS))
278 return;
279
280 if ((info->errsts ^ info->errsts2) & IE31200_ERRSTS_BITS) {
281 edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0,
282 -1, -1, -1, "UE overwrote CE", "");
283 info->errsts = info->errsts2;
284 }
285
286 for (channel = 0; channel < nr_channels; channel++) {
287 log = info->eccerrlog[channel];
288 if (log & IE31200_ECCERRLOG_UE) {
289 edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
290 0, 0, 0,
291 eccerrlog_row(log),
292 channel, -1,
293 "ie31200 UE", "");
294 } else if (log & IE31200_ECCERRLOG_CE) {
295 edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
296 0, 0,
297 IE31200_ECCERRLOG_SYNDROME(log),
298 eccerrlog_row(log),
299 channel, -1,
300 "ie31200 CE", "");
301 }
302 }
303}
304
305static void ie31200_check(struct mem_ctl_info *mci)
306{
307 struct ie31200_error_info info;
308
309 edac_dbg(1, "MC%d\n", mci->mc_idx);
310 ie31200_get_and_clear_error_info(mci, &info);
311 ie31200_process_error_info(mci, &info);
312}
313
314static void __iomem *ie31200_map_mchbar(struct pci_dev *pdev)
315{
316 union {
317 u64 mchbar;
318 struct {
319 u32 mchbar_low;
320 u32 mchbar_high;
321 };
322 } u;
323 void __iomem *window;
324
325 pci_read_config_dword(pdev, IE31200_MCHBAR_LOW, &u.mchbar_low);
326 pci_read_config_dword(pdev, IE31200_MCHBAR_HIGH, &u.mchbar_high);
327 u.mchbar &= IE31200_MCHBAR_MASK;
328
329 if (u.mchbar != (resource_size_t)u.mchbar) {
330 ie31200_printk(KERN_ERR, "mmio space beyond accessible range (0x%llx)\n",
331 (unsigned long long)u.mchbar);
332 return NULL;
333 }
334
335 window = ioremap_nocache(u.mchbar, IE31200_MMR_WINDOW_SIZE);
336 if (!window)
337 ie31200_printk(KERN_ERR, "Cannot map mmio space at 0x%llx\n",
338 (unsigned long long)u.mchbar);
339
340 return window;
341}
342
343static void __skl_populate_dimm_info(struct dimm_data *dd, u32 addr_decode,
344 int chan)
345{
346 dd->size = (addr_decode >> (chan << 4)) & IE31200_MAD_DIMM_SIZE;
347 dd->dual_rank = (addr_decode & (IE31200_MAD_DIMM_A_RANK_SKL << (chan << 4))) ? 1 : 0;
348 dd->x16_width = ((addr_decode & (IE31200_MAD_DIMM_A_WIDTH_SKL << (chan << 4))) >>
349 (IE31200_MAD_DIMM_A_WIDTH_SKL_SHIFT + (chan << 4)));
350}
351
352static void __populate_dimm_info(struct dimm_data *dd, u32 addr_decode,
353 int chan)
354{
355 dd->size = (addr_decode >> (chan << 3)) & IE31200_MAD_DIMM_SIZE;
356 dd->dual_rank = (addr_decode & (IE31200_MAD_DIMM_A_RANK << chan)) ? 1 : 0;
357 dd->x16_width = (addr_decode & (IE31200_MAD_DIMM_A_WIDTH << chan)) ? 1 : 0;
358}
359
360static void populate_dimm_info(struct dimm_data *dd, u32 addr_decode, int chan,
361 bool skl)
362{
363 if (skl)
364 __skl_populate_dimm_info(dd, addr_decode, chan);
365 else
366 __populate_dimm_info(dd, addr_decode, chan);
367}
368
369
370static int ie31200_probe1(struct pci_dev *pdev, int dev_idx)
371{
372 int i, j, ret;
373 struct mem_ctl_info *mci = NULL;
374 struct edac_mc_layer layers[2];
375 struct dimm_data dimm_info[IE31200_CHANNELS][IE31200_DIMMS_PER_CHANNEL];
376 void __iomem *window;
377 struct ie31200_priv *priv;
378 u32 addr_decode, mad_offset;
379 bool skl = (pdev->device == PCI_DEVICE_ID_INTEL_IE31200_HB_8);
380
381 edac_dbg(0, "MC:\n");
382
383 if (!ecc_capable(pdev)) {
384 ie31200_printk(KERN_INFO, "No ECC support\n");
385 return -ENODEV;
386 }
387
388 nr_channels = how_many_channels(pdev);
389 layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
390 layers[0].size = IE31200_DIMMS;
391 layers[0].is_virt_csrow = true;
392 layers[1].type = EDAC_MC_LAYER_CHANNEL;
393 layers[1].size = nr_channels;
394 layers[1].is_virt_csrow = false;
395 mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers,
396 sizeof(struct ie31200_priv));
397 if (!mci)
398 return -ENOMEM;
399
400 window = ie31200_map_mchbar(pdev);
401 if (!window) {
402 ret = -ENODEV;
403 goto fail_free;
404 }
405
406 edac_dbg(3, "MC: init mci\n");
407 mci->pdev = &pdev->dev;
408 if (skl)
409 mci->mtype_cap = MEM_FLAG_DDR4;
410 else
411 mci->mtype_cap = MEM_FLAG_DDR3;
412 mci->edac_ctl_cap = EDAC_FLAG_SECDED;
413 mci->edac_cap = EDAC_FLAG_SECDED;
414 mci->mod_name = EDAC_MOD_STR;
415 mci->mod_ver = IE31200_REVISION;
416 mci->ctl_name = ie31200_devs[dev_idx].ctl_name;
417 mci->dev_name = pci_name(pdev);
418 mci->edac_check = ie31200_check;
419 mci->ctl_page_to_phys = NULL;
420 priv = mci->pvt_info;
421 priv->window = window;
422 if (skl) {
423 priv->c0errlog = window + IE31200_C0ECCERRLOG_SKL;
424 priv->c1errlog = window + IE31200_C1ECCERRLOG_SKL;
425 mad_offset = IE31200_MAD_DIMM_0_OFFSET_SKL;
426 } else {
427 priv->c0errlog = window + IE31200_C0ECCERRLOG;
428 priv->c1errlog = window + IE31200_C1ECCERRLOG;
429 mad_offset = IE31200_MAD_DIMM_0_OFFSET;
430 }
431
432 /* populate DIMM info */
433 for (i = 0; i < IE31200_CHANNELS; i++) {
434 addr_decode = readl(window + mad_offset +
435 (i * 4));
436 edac_dbg(0, "addr_decode: 0x%x\n", addr_decode);
437 for (j = 0; j < IE31200_DIMMS_PER_CHANNEL; j++) {
438 populate_dimm_info(&dimm_info[i][j], addr_decode, j,
439 skl);
440 edac_dbg(0, "size: 0x%x, rank: %d, width: %d\n",
441 dimm_info[i][j].size,
442 dimm_info[i][j].dual_rank,
443 dimm_info[i][j].x16_width);
444 }
445 }
446
447 /*
448 * The dram rank boundary (DRB) reg values are boundary addresses
449 * for each DRAM rank with a granularity of 64MB. DRB regs are
450 * cumulative; the last one will contain the total memory
451 * contained in all ranks.
452 */
453 for (i = 0; i < IE31200_DIMMS_PER_CHANNEL; i++) {
454 for (j = 0; j < IE31200_CHANNELS; j++) {
455 struct dimm_info *dimm;
456 unsigned long nr_pages;
457
458 nr_pages = IE31200_PAGES(dimm_info[j][i].size, skl);
459 if (nr_pages == 0)
460 continue;
461
462 if (dimm_info[j][i].dual_rank) {
463 nr_pages = nr_pages / 2;
464 dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms,
465 mci->n_layers, (i * 2) + 1,
466 j, 0);
467 dimm->nr_pages = nr_pages;
468 edac_dbg(0, "set nr pages: 0x%lx\n", nr_pages);
469 dimm->grain = 8; /* just a guess */
470 if (skl)
471 dimm->mtype = MEM_DDR4;
472 else
473 dimm->mtype = MEM_DDR3;
474 dimm->dtype = DEV_UNKNOWN;
475 dimm->edac_mode = EDAC_UNKNOWN;
476 }
477 dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms,
478 mci->n_layers, i * 2, j, 0);
479 dimm->nr_pages = nr_pages;
480 edac_dbg(0, "set nr pages: 0x%lx\n", nr_pages);
481 dimm->grain = 8; /* same guess */
482 if (skl)
483 dimm->mtype = MEM_DDR4;
484 else
485 dimm->mtype = MEM_DDR3;
486 dimm->dtype = DEV_UNKNOWN;
487 dimm->edac_mode = EDAC_UNKNOWN;
488 }
489 }
490
491 ie31200_clear_error_info(mci);
492
493 if (edac_mc_add_mc(mci)) {
494 edac_dbg(3, "MC: failed edac_mc_add_mc()\n");
495 ret = -ENODEV;
496 goto fail_unmap;
497 }
498
499 /* get this far and it's successful */
500 edac_dbg(3, "MC: success\n");
501 return 0;
502
503fail_unmap:
504 iounmap(window);
505
506fail_free:
507 edac_mc_free(mci);
508
509 return ret;
510}
511
512static int ie31200_init_one(struct pci_dev *pdev,
513 const struct pci_device_id *ent)
514{
515 edac_dbg(0, "MC:\n");
516
517 if (pci_enable_device(pdev) < 0)
518 return -EIO;
519
520 return ie31200_probe1(pdev, ent->driver_data);
521}
522
523static void ie31200_remove_one(struct pci_dev *pdev)
524{
525 struct mem_ctl_info *mci;
526 struct ie31200_priv *priv;
527
528 edac_dbg(0, "\n");
529 mci = edac_mc_del_mc(&pdev->dev);
530 if (!mci)
531 return;
532 priv = mci->pvt_info;
533 iounmap(priv->window);
534 edac_mc_free(mci);
535}
536
537static const struct pci_device_id ie31200_pci_tbl[] = {
538 {
539 PCI_VEND_DEV(INTEL, IE31200_HB_1), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
540 IE31200},
541 {
542 PCI_VEND_DEV(INTEL, IE31200_HB_2), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
543 IE31200},
544 {
545 PCI_VEND_DEV(INTEL, IE31200_HB_3), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
546 IE31200},
547 {
548 PCI_VEND_DEV(INTEL, IE31200_HB_4), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
549 IE31200},
550 {
551 PCI_VEND_DEV(INTEL, IE31200_HB_5), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
552 IE31200},
553 {
554 PCI_VEND_DEV(INTEL, IE31200_HB_6), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
555 IE31200},
556 {
557 PCI_VEND_DEV(INTEL, IE31200_HB_7), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
558 IE31200},
559 {
560 PCI_VEND_DEV(INTEL, IE31200_HB_8), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
561 IE31200},
562 {
563 0,
564 } /* 0 terminated list. */
565};
566MODULE_DEVICE_TABLE(pci, ie31200_pci_tbl);
567
568static struct pci_driver ie31200_driver = {
569 .name = EDAC_MOD_STR,
570 .probe = ie31200_init_one,
571 .remove = ie31200_remove_one,
572 .id_table = ie31200_pci_tbl,
573};
574
575static int __init ie31200_init(void)
576{
577 edac_dbg(3, "MC:\n");
578 /* Ensure that the OPSTATE is set correctly for POLL or NMI */
579 opstate_init();
580
581 return pci_register_driver(&ie31200_driver);
582}
583
584static void __exit ie31200_exit(void)
585{
586 edac_dbg(3, "MC:\n");
587 pci_unregister_driver(&ie31200_driver);
588}
589
590module_init(ie31200_init);
591module_exit(ie31200_exit);
592
593MODULE_LICENSE("GPL");
594MODULE_AUTHOR("Jason Baron <jbaron@akamai.com>");
595MODULE_DESCRIPTION("MC support for Intel Processor E31200 memory hub controllers");