Loading...
1/*
2 * General Purpose functions for the global management of the
3 * 8260 Communication Processor Module.
4 * Copyright (c) 1999-2001 Dan Malek <dan@embeddedalley.com>
5 * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
6 * 2.3.99 Updates
7 *
8 * 2006 (c) MontaVista Software, Inc.
9 * Vitaly Bordug <vbordug@ru.mvista.com>
10 * Merged to arch/powerpc from arch/ppc/syslib/cpm2_common.c
11 *
12 * This file is licensed under the terms of the GNU General Public License
13 * version 2. This program is licensed "as is" without any warranty of any
14 * kind, whether express or implied.
15 */
16
17/*
18 *
19 * In addition to the individual control of the communication
20 * channels, there are a few functions that globally affect the
21 * communication processor.
22 *
23 * Buffer descriptors must be allocated from the dual ported memory
24 * space. The allocator for that is here. When the communication
25 * process is reset, we reclaim the memory available. There is
26 * currently no deallocator for this memory.
27 */
28#include <linux/errno.h>
29#include <linux/sched.h>
30#include <linux/kernel.h>
31#include <linux/param.h>
32#include <linux/string.h>
33#include <linux/mm.h>
34#include <linux/interrupt.h>
35#include <linux/module.h>
36#include <linux/of.h>
37
38#include <asm/io.h>
39#include <asm/irq.h>
40#include <asm/page.h>
41#include <asm/cpm2.h>
42#include <asm/rheap.h>
43
44#include <sysdev/fsl_soc.h>
45
46cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor space */
47
48/* We allocate this here because it is used almost exclusively for
49 * the communication processor devices.
50 */
51cpm2_map_t __iomem *cpm2_immr;
52EXPORT_SYMBOL(cpm2_immr);
53
54#define CPM_MAP_SIZE (0x40000) /* 256k - the PQ3 reserve this amount
55 of space for CPM as it is larger
56 than on PQ2 */
57
58void __init cpm2_reset(void)
59{
60#ifdef CONFIG_PPC_85xx
61 cpm2_immr = ioremap(get_immrbase() + 0x80000, CPM_MAP_SIZE);
62#else
63 cpm2_immr = ioremap(get_immrbase(), CPM_MAP_SIZE);
64#endif
65
66 /* Tell everyone where the comm processor resides.
67 */
68 cpmp = &cpm2_immr->im_cpm;
69
70#ifndef CONFIG_PPC_EARLY_DEBUG_CPM
71 /* Reset the CPM.
72 */
73 cpm_command(CPM_CR_RST, 0);
74#endif
75}
76
77static DEFINE_SPINLOCK(cmd_lock);
78
79#define MAX_CR_CMD_LOOPS 10000
80
81int cpm_command(u32 command, u8 opcode)
82{
83 int i, ret;
84 unsigned long flags;
85
86 spin_lock_irqsave(&cmd_lock, flags);
87
88 ret = 0;
89 out_be32(&cpmp->cp_cpcr, command | opcode | CPM_CR_FLG);
90 for (i = 0; i < MAX_CR_CMD_LOOPS; i++)
91 if ((in_be32(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0)
92 goto out;
93
94 printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__);
95 ret = -EIO;
96out:
97 spin_unlock_irqrestore(&cmd_lock, flags);
98 return ret;
99}
100EXPORT_SYMBOL(cpm_command);
101
102/* Set a baud rate generator. This needs lots of work. There are
103 * eight BRGs, which can be connected to the CPM channels or output
104 * as clocks. The BRGs are in two different block of internal
105 * memory mapped space.
106 * The baud rate clock is the system clock divided by something.
107 * It was set up long ago during the initial boot phase and is
108 * given to us.
109 * Baud rate clocks are zero-based in the driver code (as that maps
110 * to port numbers). Documentation uses 1-based numbering.
111 */
112void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src)
113{
114 u32 __iomem *bp;
115 u32 val;
116
117 /* This is good enough to get SMCs running.....
118 */
119 if (brg < 4) {
120 bp = &cpm2_immr->im_brgc1;
121 } else {
122 bp = &cpm2_immr->im_brgc5;
123 brg -= 4;
124 }
125 bp += brg;
126 /* Round the clock divider to the nearest integer. */
127 val = (((clk * 2 / rate) - 1) & ~1) | CPM_BRG_EN | src;
128 if (div16)
129 val |= CPM_BRG_DIV16;
130
131 out_be32(bp, val);
132}
133EXPORT_SYMBOL(__cpm2_setbrg);
134
135int __init cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode)
136{
137 int ret = 0;
138 int shift;
139 int i, bits = 0;
140 u32 __iomem *reg;
141 u32 mask = 7;
142
143 u8 clk_map[][3] = {
144 {CPM_CLK_FCC1, CPM_BRG5, 0},
145 {CPM_CLK_FCC1, CPM_BRG6, 1},
146 {CPM_CLK_FCC1, CPM_BRG7, 2},
147 {CPM_CLK_FCC1, CPM_BRG8, 3},
148 {CPM_CLK_FCC1, CPM_CLK9, 4},
149 {CPM_CLK_FCC1, CPM_CLK10, 5},
150 {CPM_CLK_FCC1, CPM_CLK11, 6},
151 {CPM_CLK_FCC1, CPM_CLK12, 7},
152 {CPM_CLK_FCC2, CPM_BRG5, 0},
153 {CPM_CLK_FCC2, CPM_BRG6, 1},
154 {CPM_CLK_FCC2, CPM_BRG7, 2},
155 {CPM_CLK_FCC2, CPM_BRG8, 3},
156 {CPM_CLK_FCC2, CPM_CLK13, 4},
157 {CPM_CLK_FCC2, CPM_CLK14, 5},
158 {CPM_CLK_FCC2, CPM_CLK15, 6},
159 {CPM_CLK_FCC2, CPM_CLK16, 7},
160 {CPM_CLK_FCC3, CPM_BRG5, 0},
161 {CPM_CLK_FCC3, CPM_BRG6, 1},
162 {CPM_CLK_FCC3, CPM_BRG7, 2},
163 {CPM_CLK_FCC3, CPM_BRG8, 3},
164 {CPM_CLK_FCC3, CPM_CLK13, 4},
165 {CPM_CLK_FCC3, CPM_CLK14, 5},
166 {CPM_CLK_FCC3, CPM_CLK15, 6},
167 {CPM_CLK_FCC3, CPM_CLK16, 7},
168 {CPM_CLK_SCC1, CPM_BRG1, 0},
169 {CPM_CLK_SCC1, CPM_BRG2, 1},
170 {CPM_CLK_SCC1, CPM_BRG3, 2},
171 {CPM_CLK_SCC1, CPM_BRG4, 3},
172 {CPM_CLK_SCC1, CPM_CLK11, 4},
173 {CPM_CLK_SCC1, CPM_CLK12, 5},
174 {CPM_CLK_SCC1, CPM_CLK3, 6},
175 {CPM_CLK_SCC1, CPM_CLK4, 7},
176 {CPM_CLK_SCC2, CPM_BRG1, 0},
177 {CPM_CLK_SCC2, CPM_BRG2, 1},
178 {CPM_CLK_SCC2, CPM_BRG3, 2},
179 {CPM_CLK_SCC2, CPM_BRG4, 3},
180 {CPM_CLK_SCC2, CPM_CLK11, 4},
181 {CPM_CLK_SCC2, CPM_CLK12, 5},
182 {CPM_CLK_SCC2, CPM_CLK3, 6},
183 {CPM_CLK_SCC2, CPM_CLK4, 7},
184 {CPM_CLK_SCC3, CPM_BRG1, 0},
185 {CPM_CLK_SCC3, CPM_BRG2, 1},
186 {CPM_CLK_SCC3, CPM_BRG3, 2},
187 {CPM_CLK_SCC3, CPM_BRG4, 3},
188 {CPM_CLK_SCC3, CPM_CLK5, 4},
189 {CPM_CLK_SCC3, CPM_CLK6, 5},
190 {CPM_CLK_SCC3, CPM_CLK7, 6},
191 {CPM_CLK_SCC3, CPM_CLK8, 7},
192 {CPM_CLK_SCC4, CPM_BRG1, 0},
193 {CPM_CLK_SCC4, CPM_BRG2, 1},
194 {CPM_CLK_SCC4, CPM_BRG3, 2},
195 {CPM_CLK_SCC4, CPM_BRG4, 3},
196 {CPM_CLK_SCC4, CPM_CLK5, 4},
197 {CPM_CLK_SCC4, CPM_CLK6, 5},
198 {CPM_CLK_SCC4, CPM_CLK7, 6},
199 {CPM_CLK_SCC4, CPM_CLK8, 7},
200 };
201
202 switch (target) {
203 case CPM_CLK_SCC1:
204 reg = &cpm2_immr->im_cpmux.cmx_scr;
205 shift = 24;
206 break;
207 case CPM_CLK_SCC2:
208 reg = &cpm2_immr->im_cpmux.cmx_scr;
209 shift = 16;
210 break;
211 case CPM_CLK_SCC3:
212 reg = &cpm2_immr->im_cpmux.cmx_scr;
213 shift = 8;
214 break;
215 case CPM_CLK_SCC4:
216 reg = &cpm2_immr->im_cpmux.cmx_scr;
217 shift = 0;
218 break;
219 case CPM_CLK_FCC1:
220 reg = &cpm2_immr->im_cpmux.cmx_fcr;
221 shift = 24;
222 break;
223 case CPM_CLK_FCC2:
224 reg = &cpm2_immr->im_cpmux.cmx_fcr;
225 shift = 16;
226 break;
227 case CPM_CLK_FCC3:
228 reg = &cpm2_immr->im_cpmux.cmx_fcr;
229 shift = 8;
230 break;
231 default:
232 printk(KERN_ERR "cpm2_clock_setup: invalid clock target\n");
233 return -EINVAL;
234 }
235
236 for (i = 0; i < ARRAY_SIZE(clk_map); i++) {
237 if (clk_map[i][0] == target && clk_map[i][1] == clock) {
238 bits = clk_map[i][2];
239 break;
240 }
241 }
242 if (i == ARRAY_SIZE(clk_map))
243 ret = -EINVAL;
244
245 bits <<= shift;
246 mask <<= shift;
247
248 if (mode == CPM_CLK_RTX) {
249 bits |= bits << 3;
250 mask |= mask << 3;
251 } else if (mode == CPM_CLK_RX) {
252 bits <<= 3;
253 mask <<= 3;
254 }
255
256 out_be32(reg, (in_be32(reg) & ~mask) | bits);
257
258 return ret;
259}
260
261int __init cpm2_smc_clk_setup(enum cpm_clk_target target, int clock)
262{
263 int ret = 0;
264 int shift;
265 int i, bits = 0;
266 u8 __iomem *reg;
267 u8 mask = 3;
268
269 u8 clk_map[][3] = {
270 {CPM_CLK_SMC1, CPM_BRG1, 0},
271 {CPM_CLK_SMC1, CPM_BRG7, 1},
272 {CPM_CLK_SMC1, CPM_CLK7, 2},
273 {CPM_CLK_SMC1, CPM_CLK9, 3},
274 {CPM_CLK_SMC2, CPM_BRG2, 0},
275 {CPM_CLK_SMC2, CPM_BRG8, 1},
276 {CPM_CLK_SMC2, CPM_CLK4, 2},
277 {CPM_CLK_SMC2, CPM_CLK15, 3},
278 };
279
280 switch (target) {
281 case CPM_CLK_SMC1:
282 reg = &cpm2_immr->im_cpmux.cmx_smr;
283 mask = 3;
284 shift = 4;
285 break;
286 case CPM_CLK_SMC2:
287 reg = &cpm2_immr->im_cpmux.cmx_smr;
288 mask = 3;
289 shift = 0;
290 break;
291 default:
292 printk(KERN_ERR "cpm2_smc_clock_setup: invalid clock target\n");
293 return -EINVAL;
294 }
295
296 for (i = 0; i < ARRAY_SIZE(clk_map); i++) {
297 if (clk_map[i][0] == target && clk_map[i][1] == clock) {
298 bits = clk_map[i][2];
299 break;
300 }
301 }
302 if (i == ARRAY_SIZE(clk_map))
303 ret = -EINVAL;
304
305 bits <<= shift;
306 mask <<= shift;
307
308 out_8(reg, (in_8(reg) & ~mask) | bits);
309
310 return ret;
311}
312
313struct cpm2_ioports {
314 u32 dir, par, sor, odr, dat;
315 u32 res[3];
316};
317
318void __init cpm2_set_pin(int port, int pin, int flags)
319{
320 struct cpm2_ioports __iomem *iop =
321 (struct cpm2_ioports __iomem *)&cpm2_immr->im_ioport;
322
323 pin = 1 << (31 - pin);
324
325 if (flags & CPM_PIN_OUTPUT)
326 setbits32(&iop[port].dir, pin);
327 else
328 clrbits32(&iop[port].dir, pin);
329
330 if (!(flags & CPM_PIN_GPIO))
331 setbits32(&iop[port].par, pin);
332 else
333 clrbits32(&iop[port].par, pin);
334
335 if (flags & CPM_PIN_SECONDARY)
336 setbits32(&iop[port].sor, pin);
337 else
338 clrbits32(&iop[port].sor, pin);
339
340 if (flags & CPM_PIN_OPENDRAIN)
341 setbits32(&iop[port].odr, pin);
342 else
343 clrbits32(&iop[port].odr, pin);
344}
1/*
2 * General Purpose functions for the global management of the
3 * 8260 Communication Processor Module.
4 * Copyright (c) 1999-2001 Dan Malek <dan@embeddedalley.com>
5 * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
6 * 2.3.99 Updates
7 *
8 * 2006 (c) MontaVista Software, Inc.
9 * Vitaly Bordug <vbordug@ru.mvista.com>
10 * Merged to arch/powerpc from arch/ppc/syslib/cpm2_common.c
11 *
12 * This file is licensed under the terms of the GNU General Public License
13 * version 2. This program is licensed "as is" without any warranty of any
14 * kind, whether express or implied.
15 */
16
17/*
18 *
19 * In addition to the individual control of the communication
20 * channels, there are a few functions that globally affect the
21 * communication processor.
22 *
23 * Buffer descriptors must be allocated from the dual ported memory
24 * space. The allocator for that is here. When the communication
25 * process is reset, we reclaim the memory available. There is
26 * currently no deallocator for this memory.
27 */
28#include <linux/errno.h>
29#include <linux/sched.h>
30#include <linux/kernel.h>
31#include <linux/param.h>
32#include <linux/string.h>
33#include <linux/mm.h>
34#include <linux/interrupt.h>
35#include <linux/module.h>
36#include <linux/of.h>
37
38#include <asm/io.h>
39#include <asm/irq.h>
40#include <asm/mpc8260.h>
41#include <asm/page.h>
42#include <asm/pgtable.h>
43#include <asm/cpm2.h>
44#include <asm/rheap.h>
45#include <asm/fs_pd.h>
46
47#include <sysdev/fsl_soc.h>
48
49cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor space */
50
51/* We allocate this here because it is used almost exclusively for
52 * the communication processor devices.
53 */
54cpm2_map_t __iomem *cpm2_immr;
55EXPORT_SYMBOL(cpm2_immr);
56
57#define CPM_MAP_SIZE (0x40000) /* 256k - the PQ3 reserve this amount
58 of space for CPM as it is larger
59 than on PQ2 */
60
61void __init cpm2_reset(void)
62{
63#ifdef CONFIG_PPC_85xx
64 cpm2_immr = ioremap(get_immrbase() + 0x80000, CPM_MAP_SIZE);
65#else
66 cpm2_immr = ioremap(get_immrbase(), CPM_MAP_SIZE);
67#endif
68
69 /* Tell everyone where the comm processor resides.
70 */
71 cpmp = &cpm2_immr->im_cpm;
72
73#ifndef CONFIG_PPC_EARLY_DEBUG_CPM
74 /* Reset the CPM.
75 */
76 cpm_command(CPM_CR_RST, 0);
77#endif
78}
79
80static DEFINE_SPINLOCK(cmd_lock);
81
82#define MAX_CR_CMD_LOOPS 10000
83
84int cpm_command(u32 command, u8 opcode)
85{
86 int i, ret;
87 unsigned long flags;
88
89 spin_lock_irqsave(&cmd_lock, flags);
90
91 ret = 0;
92 out_be32(&cpmp->cp_cpcr, command | opcode | CPM_CR_FLG);
93 for (i = 0; i < MAX_CR_CMD_LOOPS; i++)
94 if ((in_be32(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0)
95 goto out;
96
97 printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__);
98 ret = -EIO;
99out:
100 spin_unlock_irqrestore(&cmd_lock, flags);
101 return ret;
102}
103EXPORT_SYMBOL(cpm_command);
104
105/* Set a baud rate generator. This needs lots of work. There are
106 * eight BRGs, which can be connected to the CPM channels or output
107 * as clocks. The BRGs are in two different block of internal
108 * memory mapped space.
109 * The baud rate clock is the system clock divided by something.
110 * It was set up long ago during the initial boot phase and is
111 * is given to us.
112 * Baud rate clocks are zero-based in the driver code (as that maps
113 * to port numbers). Documentation uses 1-based numbering.
114 */
115void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src)
116{
117 u32 __iomem *bp;
118 u32 val;
119
120 /* This is good enough to get SMCs running.....
121 */
122 if (brg < 4) {
123 bp = cpm2_map_size(im_brgc1, 16);
124 } else {
125 bp = cpm2_map_size(im_brgc5, 16);
126 brg -= 4;
127 }
128 bp += brg;
129 /* Round the clock divider to the nearest integer. */
130 val = (((clk * 2 / rate) - 1) & ~1) | CPM_BRG_EN | src;
131 if (div16)
132 val |= CPM_BRG_DIV16;
133
134 out_be32(bp, val);
135 cpm2_unmap(bp);
136}
137EXPORT_SYMBOL(__cpm2_setbrg);
138
139int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode)
140{
141 int ret = 0;
142 int shift;
143 int i, bits = 0;
144 cpmux_t __iomem *im_cpmux;
145 u32 __iomem *reg;
146 u32 mask = 7;
147
148 u8 clk_map[][3] = {
149 {CPM_CLK_FCC1, CPM_BRG5, 0},
150 {CPM_CLK_FCC1, CPM_BRG6, 1},
151 {CPM_CLK_FCC1, CPM_BRG7, 2},
152 {CPM_CLK_FCC1, CPM_BRG8, 3},
153 {CPM_CLK_FCC1, CPM_CLK9, 4},
154 {CPM_CLK_FCC1, CPM_CLK10, 5},
155 {CPM_CLK_FCC1, CPM_CLK11, 6},
156 {CPM_CLK_FCC1, CPM_CLK12, 7},
157 {CPM_CLK_FCC2, CPM_BRG5, 0},
158 {CPM_CLK_FCC2, CPM_BRG6, 1},
159 {CPM_CLK_FCC2, CPM_BRG7, 2},
160 {CPM_CLK_FCC2, CPM_BRG8, 3},
161 {CPM_CLK_FCC2, CPM_CLK13, 4},
162 {CPM_CLK_FCC2, CPM_CLK14, 5},
163 {CPM_CLK_FCC2, CPM_CLK15, 6},
164 {CPM_CLK_FCC2, CPM_CLK16, 7},
165 {CPM_CLK_FCC3, CPM_BRG5, 0},
166 {CPM_CLK_FCC3, CPM_BRG6, 1},
167 {CPM_CLK_FCC3, CPM_BRG7, 2},
168 {CPM_CLK_FCC3, CPM_BRG8, 3},
169 {CPM_CLK_FCC3, CPM_CLK13, 4},
170 {CPM_CLK_FCC3, CPM_CLK14, 5},
171 {CPM_CLK_FCC3, CPM_CLK15, 6},
172 {CPM_CLK_FCC3, CPM_CLK16, 7},
173 {CPM_CLK_SCC1, CPM_BRG1, 0},
174 {CPM_CLK_SCC1, CPM_BRG2, 1},
175 {CPM_CLK_SCC1, CPM_BRG3, 2},
176 {CPM_CLK_SCC1, CPM_BRG4, 3},
177 {CPM_CLK_SCC1, CPM_CLK11, 4},
178 {CPM_CLK_SCC1, CPM_CLK12, 5},
179 {CPM_CLK_SCC1, CPM_CLK3, 6},
180 {CPM_CLK_SCC1, CPM_CLK4, 7},
181 {CPM_CLK_SCC2, CPM_BRG1, 0},
182 {CPM_CLK_SCC2, CPM_BRG2, 1},
183 {CPM_CLK_SCC2, CPM_BRG3, 2},
184 {CPM_CLK_SCC2, CPM_BRG4, 3},
185 {CPM_CLK_SCC2, CPM_CLK11, 4},
186 {CPM_CLK_SCC2, CPM_CLK12, 5},
187 {CPM_CLK_SCC2, CPM_CLK3, 6},
188 {CPM_CLK_SCC2, CPM_CLK4, 7},
189 {CPM_CLK_SCC3, CPM_BRG1, 0},
190 {CPM_CLK_SCC3, CPM_BRG2, 1},
191 {CPM_CLK_SCC3, CPM_BRG3, 2},
192 {CPM_CLK_SCC3, CPM_BRG4, 3},
193 {CPM_CLK_SCC3, CPM_CLK5, 4},
194 {CPM_CLK_SCC3, CPM_CLK6, 5},
195 {CPM_CLK_SCC3, CPM_CLK7, 6},
196 {CPM_CLK_SCC3, CPM_CLK8, 7},
197 {CPM_CLK_SCC4, CPM_BRG1, 0},
198 {CPM_CLK_SCC4, CPM_BRG2, 1},
199 {CPM_CLK_SCC4, CPM_BRG3, 2},
200 {CPM_CLK_SCC4, CPM_BRG4, 3},
201 {CPM_CLK_SCC4, CPM_CLK5, 4},
202 {CPM_CLK_SCC4, CPM_CLK6, 5},
203 {CPM_CLK_SCC4, CPM_CLK7, 6},
204 {CPM_CLK_SCC4, CPM_CLK8, 7},
205 };
206
207 im_cpmux = cpm2_map(im_cpmux);
208
209 switch (target) {
210 case CPM_CLK_SCC1:
211 reg = &im_cpmux->cmx_scr;
212 shift = 24;
213 break;
214 case CPM_CLK_SCC2:
215 reg = &im_cpmux->cmx_scr;
216 shift = 16;
217 break;
218 case CPM_CLK_SCC3:
219 reg = &im_cpmux->cmx_scr;
220 shift = 8;
221 break;
222 case CPM_CLK_SCC4:
223 reg = &im_cpmux->cmx_scr;
224 shift = 0;
225 break;
226 case CPM_CLK_FCC1:
227 reg = &im_cpmux->cmx_fcr;
228 shift = 24;
229 break;
230 case CPM_CLK_FCC2:
231 reg = &im_cpmux->cmx_fcr;
232 shift = 16;
233 break;
234 case CPM_CLK_FCC3:
235 reg = &im_cpmux->cmx_fcr;
236 shift = 8;
237 break;
238 default:
239 printk(KERN_ERR "cpm2_clock_setup: invalid clock target\n");
240 return -EINVAL;
241 }
242
243 for (i = 0; i < ARRAY_SIZE(clk_map); i++) {
244 if (clk_map[i][0] == target && clk_map[i][1] == clock) {
245 bits = clk_map[i][2];
246 break;
247 }
248 }
249 if (i == ARRAY_SIZE(clk_map))
250 ret = -EINVAL;
251
252 bits <<= shift;
253 mask <<= shift;
254
255 if (mode == CPM_CLK_RTX) {
256 bits |= bits << 3;
257 mask |= mask << 3;
258 } else if (mode == CPM_CLK_RX) {
259 bits <<= 3;
260 mask <<= 3;
261 }
262
263 out_be32(reg, (in_be32(reg) & ~mask) | bits);
264
265 cpm2_unmap(im_cpmux);
266 return ret;
267}
268
269int cpm2_smc_clk_setup(enum cpm_clk_target target, int clock)
270{
271 int ret = 0;
272 int shift;
273 int i, bits = 0;
274 cpmux_t __iomem *im_cpmux;
275 u8 __iomem *reg;
276 u8 mask = 3;
277
278 u8 clk_map[][3] = {
279 {CPM_CLK_SMC1, CPM_BRG1, 0},
280 {CPM_CLK_SMC1, CPM_BRG7, 1},
281 {CPM_CLK_SMC1, CPM_CLK7, 2},
282 {CPM_CLK_SMC1, CPM_CLK9, 3},
283 {CPM_CLK_SMC2, CPM_BRG2, 0},
284 {CPM_CLK_SMC2, CPM_BRG8, 1},
285 {CPM_CLK_SMC2, CPM_CLK4, 2},
286 {CPM_CLK_SMC2, CPM_CLK15, 3},
287 };
288
289 im_cpmux = cpm2_map(im_cpmux);
290
291 switch (target) {
292 case CPM_CLK_SMC1:
293 reg = &im_cpmux->cmx_smr;
294 mask = 3;
295 shift = 4;
296 break;
297 case CPM_CLK_SMC2:
298 reg = &im_cpmux->cmx_smr;
299 mask = 3;
300 shift = 0;
301 break;
302 default:
303 printk(KERN_ERR "cpm2_smc_clock_setup: invalid clock target\n");
304 return -EINVAL;
305 }
306
307 for (i = 0; i < ARRAY_SIZE(clk_map); i++) {
308 if (clk_map[i][0] == target && clk_map[i][1] == clock) {
309 bits = clk_map[i][2];
310 break;
311 }
312 }
313 if (i == ARRAY_SIZE(clk_map))
314 ret = -EINVAL;
315
316 bits <<= shift;
317 mask <<= shift;
318
319 out_8(reg, (in_8(reg) & ~mask) | bits);
320
321 cpm2_unmap(im_cpmux);
322 return ret;
323}
324
325struct cpm2_ioports {
326 u32 dir, par, sor, odr, dat;
327 u32 res[3];
328};
329
330void cpm2_set_pin(int port, int pin, int flags)
331{
332 struct cpm2_ioports __iomem *iop =
333 (struct cpm2_ioports __iomem *)&cpm2_immr->im_ioport;
334
335 pin = 1 << (31 - pin);
336
337 if (flags & CPM_PIN_OUTPUT)
338 setbits32(&iop[port].dir, pin);
339 else
340 clrbits32(&iop[port].dir, pin);
341
342 if (!(flags & CPM_PIN_GPIO))
343 setbits32(&iop[port].par, pin);
344 else
345 clrbits32(&iop[port].par, pin);
346
347 if (flags & CPM_PIN_SECONDARY)
348 setbits32(&iop[port].sor, pin);
349 else
350 clrbits32(&iop[port].sor, pin);
351
352 if (flags & CPM_PIN_OPENDRAIN)
353 setbits32(&iop[port].odr, pin);
354 else
355 clrbits32(&iop[port].odr, pin);
356}
357
358static int cpm_init_par_io(void)
359{
360 struct device_node *np;
361
362 for_each_compatible_node(np, NULL, "fsl,cpm2-pario-bank")
363 cpm2_gpiochip_add32(np);
364 return 0;
365}
366arch_initcall(cpm_init_par_io);
367