1/*
  2 * Copyright (c) 2017 MediaTek Inc.
  3 * Author: YT Shen <yt.shen@mediatek.com>
  4 *
  5 * SPDX-License-Identifier: (GPL-2.0 OR MIT)
  6 */
  7
  8/dts-v1/;
  9#include <dt-bindings/gpio/gpio.h>
 10#include "mt2712e.dtsi"
 11
 12/ {
 13	model = "MediaTek MT2712 evaluation board";
 14	chassis-type = "embedded";
 15	compatible = "mediatek,mt2712-evb", "mediatek,mt2712";
 16
 17	aliases {
 18		serial0 = &uart0;
 19	};
 20
 21	memory@40000000 {
 22		device_type = "memory";
 23		reg = <0 0x40000000 0 0x80000000>;
 24	};
 25
 26	chosen {
 27		stdout-path = "serial0:921600n8";
 28	};
 29
 30	cpus_fixed_vproc0: regulator-vproc-buck0 {
 31		compatible = "regulator-fixed";
 32		regulator-name = "vproc_buck0";
 33		regulator-min-microvolt = <1000000>;
 34		regulator-max-microvolt = <1000000>;
 35	};
 36
 37	cpus_fixed_vproc1: regulator-vproc-buck1 {
 38		compatible = "regulator-fixed";
 39		regulator-name = "vproc_buck1";
 40		regulator-min-microvolt = <1000000>;
 41		regulator-max-microvolt = <1000000>;
 42	};
 43
 44	extcon_usb: extcon_iddig {
 45		compatible = "linux,extcon-usb-gpio";
 46		id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
 47	};
 48
 49	extcon_usb1: extcon_iddig1 {
 50		compatible = "linux,extcon-usb-gpio";
 51		id-gpios = <&pio 14 GPIO_ACTIVE_HIGH>;
 52	};
 53
 54	usb_p0_vbus: regulator-usb-p0-vbus {
 55		compatible = "regulator-fixed";
 56		regulator-name = "p0_vbus";
 57		regulator-min-microvolt = <5000000>;
 58		regulator-max-microvolt = <5000000>;
 59		gpio = <&pio 13 GPIO_ACTIVE_HIGH>;
 60		enable-active-high;
 61	};
 62
 63	usb_p1_vbus: regulator-usb-p1-vbus {
 64		compatible = "regulator-fixed";
 65		regulator-name = "p1_vbus";
 66		regulator-min-microvolt = <5000000>;
 67		regulator-max-microvolt = <5000000>;
 68		gpio = <&pio 15 GPIO_ACTIVE_HIGH>;
 69		enable-active-high;
 70	};
 71
 72	usb_p2_vbus: regulator-usb-p2-vbus {
 73		compatible = "regulator-fixed";
 74		regulator-name = "p2_vbus";
 75		regulator-min-microvolt = <5000000>;
 76		regulator-max-microvolt = <5000000>;
 77		gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
 78		enable-active-high;
 79	};
 80
 81	usb_p3_vbus: regulator-usb-p3-vbus {
 82		compatible = "regulator-fixed";
 83		regulator-name = "p3_vbus";
 84		regulator-min-microvolt = <5000000>;
 85		regulator-max-microvolt = <5000000>;
 86		gpio = <&pio 17 GPIO_ACTIVE_HIGH>;
 87		enable-active-high;
 88		regulator-always-on;
 89	};
 90
 91};
 92
 93&auxadc {
 94	status = "okay";
 95};
 96
 97&cpu0 {
 98	proc-supply = <&cpus_fixed_vproc0>;
 99};
100
101&cpu1 {
102	proc-supply = <&cpus_fixed_vproc0>;
103};
104
105&cpu2 {
106	proc-supply = <&cpus_fixed_vproc1>;
107};
108
109&eth {
110	phy-mode = "rgmii-rxid";
111	phy-handle = <&ethernet_phy0>;
112	mediatek,tx-delay-ps = <1530>;
113	snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>;
114	snps,reset-delays-us = <0 10000 10000>;
115	pinctrl-names = "default", "sleep";
116	pinctrl-0 = <&eth_default>;
117	pinctrl-1 = <&eth_sleep>;
118	status = "okay";
119
120	mdio {
121		compatible = "snps,dwmac-mdio";
122		#address-cells = <1>;
123		#size-cells = <0>;
124		ethernet_phy0: ethernet-phy@5 {
125			compatible = "ethernet-phy-id0243.0d90";
126			reg = <0x5>;
127		};
128	};
129};
130
131&pio {
132	eth_default: eth-default-pins {
133		tx_pins {
134			pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GBE_TXD3>,
135				 <MT2712_PIN_72_GBE_TXD2__FUNC_GBE_TXD2>,
136				 <MT2712_PIN_73_GBE_TXD1__FUNC_GBE_TXD1>,
137				 <MT2712_PIN_74_GBE_TXD0__FUNC_GBE_TXD0>,
138				 <MT2712_PIN_75_GBE_TXC__FUNC_GBE_TXC>,
139				 <MT2712_PIN_76_GBE_TXEN__FUNC_GBE_TXEN>;
140			drive-strength = <8>;
141		};
142		rx_pins {
143			pinmux = <MT2712_PIN_78_GBE_RXD3__FUNC_GBE_RXD3>,
144				 <MT2712_PIN_79_GBE_RXD2__FUNC_GBE_RXD2>,
145				 <MT2712_PIN_80_GBE_RXD1__FUNC_GBE_RXD1>,
146				 <MT2712_PIN_81_GBE_RXD0__FUNC_GBE_RXD0>,
147				 <MT2712_PIN_82_GBE_RXDV__FUNC_GBE_RXDV>,
148				 <MT2712_PIN_84_GBE_RXC__FUNC_GBE_RXC>;
149			input-enable;
150		};
151		mdio_pins {
152			pinmux = <MT2712_PIN_85_GBE_MDC__FUNC_GBE_MDC>,
153				 <MT2712_PIN_86_GBE_MDIO__FUNC_GBE_MDIO>;
154			drive-strength = <8>;
155			input-enable;
156		};
157	};
158
159	eth_sleep: eth-sleep-pins {
160		tx_pins {
161			pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GPIO71>,
162				 <MT2712_PIN_72_GBE_TXD2__FUNC_GPIO72>,
163				 <MT2712_PIN_73_GBE_TXD1__FUNC_GPIO73>,
164				 <MT2712_PIN_74_GBE_TXD0__FUNC_GPIO74>,
165				 <MT2712_PIN_75_GBE_TXC__FUNC_GPIO75>,
166				 <MT2712_PIN_76_GBE_TXEN__FUNC_GPIO76>;
167		};
168		rx_pins {
169			pinmux = <MT2712_PIN_78_GBE_RXD3__FUNC_GPIO78>,
170				 <MT2712_PIN_79_GBE_RXD2__FUNC_GPIO79>,
171				 <MT2712_PIN_80_GBE_RXD1__FUNC_GPIO80>,
172				 <MT2712_PIN_81_GBE_RXD0__FUNC_GPIO81>,
173				 <MT2712_PIN_82_GBE_RXDV__FUNC_GPIO82>,
174				 <MT2712_PIN_84_GBE_RXC__FUNC_GPIO84>;
175			input-disable;
176		};
177		mdio_pins {
178			pinmux = <MT2712_PIN_85_GBE_MDC__FUNC_GPIO85>,
179				 <MT2712_PIN_86_GBE_MDIO__FUNC_GPIO86>;
180			input-disable;
181			bias-disable;
182		};
183	};
184
185	usb0_id_pins_float: usb0-iddig-pins {
186		pins_iddig {
187			pinmux = <MT2712_PIN_12_IDDIG_P0__FUNC_IDDIG_A>;
188			bias-pull-up;
189		};
190	};
191
192	usb1_id_pins_float: usb1-iddig-pins {
193		pins_iddig {
194			pinmux = <MT2712_PIN_14_IDDIG_P1__FUNC_IDDIG_B>;
195			bias-pull-up;
196		};
197	};
198};
199
200&ssusb {
201	vbus-supply = <&usb_p0_vbus>;
202	extcon = <&extcon_usb>;
203	dr_mode = "otg";
204	wakeup-source;
205	mediatek,u3p-dis-msk = <0x1>;
206	//enable-manual-drd;
207	//maximum-speed = "full-speed";
208	pinctrl-names = "default";
209	pinctrl-0 = <&usb0_id_pins_float>;
210	status = "okay";
211};
212
213&ssusb1 {
214	vbus-supply = <&usb_p1_vbus>;
215	extcon = <&extcon_usb1>;
216	dr_mode = "otg";
217	//mediatek,u3p-dis-msk = <0x1>;
218	enable-manual-drd;
219	wakeup-source;
220	//maximum-speed = "full-speed";
221	pinctrl-names = "default";
222	pinctrl-0 = <&usb1_id_pins_float>;
223	status = "okay";
224};
225
226&uart0 {
227	status = "okay";
228};
229
230&usb_host0 {
231	vbus-supply = <&usb_p2_vbus>;
232	status = "okay";
233};
234
235&usb_host1 {
236	status = "okay";
237};