Loading...
1/* SPDX-License-Identifier: GPL-2.0-only */
2/*
3 * linux/arch/arm/mm/proc-v6.S
4 *
5 * Copyright (C) 2001 Deep Blue Solutions Ltd.
6 * Modified by Catalin Marinas for noMMU support
7 *
8 * This is the "shell" of the ARMv6 processor support.
9 */
10#include <linux/init.h>
11#include <linux/cfi_types.h>
12#include <linux/linkage.h>
13#include <linux/pgtable.h>
14#include <asm/assembler.h>
15#include <asm/asm-offsets.h>
16#include <asm/hwcap.h>
17#include <asm/pgtable-hwdef.h>
18
19#include "proc-macros.S"
20
21#define D_CACHE_LINE_SIZE 32
22
23#define TTB_C (1 << 0)
24#define TTB_S (1 << 1)
25#define TTB_IMP (1 << 2)
26#define TTB_RGN_NC (0 << 3)
27#define TTB_RGN_WBWA (1 << 3)
28#define TTB_RGN_WT (2 << 3)
29#define TTB_RGN_WB (3 << 3)
30
31#define TTB_FLAGS_UP TTB_RGN_WBWA
32#define PMD_FLAGS_UP PMD_SECT_WB
33#define TTB_FLAGS_SMP TTB_RGN_WBWA|TTB_S
34#define PMD_FLAGS_SMP PMD_SECT_WBWA|PMD_SECT_S
35
36.arch armv6
37
38SYM_TYPED_FUNC_START(cpu_v6_proc_init)
39 ret lr
40SYM_FUNC_END(cpu_v6_proc_init)
41
42SYM_TYPED_FUNC_START(cpu_v6_proc_fin)
43 mrc p15, 0, r0, c1, c0, 0 @ ctrl register
44 bic r0, r0, #0x1000 @ ...i............
45 bic r0, r0, #0x0006 @ .............ca.
46 mcr p15, 0, r0, c1, c0, 0 @ disable caches
47 ret lr
48SYM_FUNC_END(cpu_v6_proc_fin)
49
50/*
51 * cpu_v6_reset(loc)
52 *
53 * Perform a soft reset of the system. Put the CPU into the
54 * same state as it would be if it had been reset, and branch
55 * to what would be the reset vector.
56 *
57 * - loc - location to jump to for soft reset
58 */
59 .align 5
60 .pushsection .idmap.text, "ax"
61SYM_TYPED_FUNC_START(cpu_v6_reset)
62 mrc p15, 0, r1, c1, c0, 0 @ ctrl register
63 bic r1, r1, #0x1 @ ...............m
64 mcr p15, 0, r1, c1, c0, 0 @ disable MMU
65 mov r1, #0
66 mcr p15, 0, r1, c7, c5, 4 @ ISB
67 ret r0
68SYM_FUNC_END(cpu_v6_reset)
69 .popsection
70
71/*
72 * cpu_v6_do_idle()
73 *
74 * Idle the processor (eg, wait for interrupt).
75 *
76 * IRQs are already disabled.
77 */
78SYM_TYPED_FUNC_START(cpu_v6_do_idle)
79 mov r1, #0
80 mcr p15, 0, r1, c7, c10, 4 @ DWB - WFI may enter a low-power mode
81 mcr p15, 0, r1, c7, c0, 4 @ wait for interrupt
82 ret lr
83SYM_FUNC_END(cpu_v6_do_idle)
84
85SYM_TYPED_FUNC_START(cpu_v6_dcache_clean_area)
861: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
87 add r0, r0, #D_CACHE_LINE_SIZE
88 subs r1, r1, #D_CACHE_LINE_SIZE
89 bhi 1b
90 ret lr
91SYM_FUNC_END(cpu_v6_dcache_clean_area)
92
93/*
94 * cpu_v6_switch_mm(pgd_phys, tsk)
95 *
96 * Set the translation table base pointer to be pgd_phys
97 *
98 * - pgd_phys - physical address of new TTB
99 *
100 * It is assumed that:
101 * - we are not using split page tables
102 */
103SYM_TYPED_FUNC_START(cpu_v6_switch_mm)
104#ifdef CONFIG_MMU
105 mov r2, #0
106 mmid r1, r1 @ get mm->context.id
107 ALT_SMP(orr r0, r0, #TTB_FLAGS_SMP)
108 ALT_UP(orr r0, r0, #TTB_FLAGS_UP)
109 mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
110 mcr p15, 0, r2, c7, c10, 4 @ drain write buffer
111 mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
112#ifdef CONFIG_PID_IN_CONTEXTIDR
113 mrc p15, 0, r2, c13, c0, 1 @ read current context ID
114 bic r2, r2, #0xff @ extract the PID
115 and r1, r1, #0xff
116 orr r1, r1, r2 @ insert into new context ID
117#endif
118 mcr p15, 0, r1, c13, c0, 1 @ set context ID
119#endif
120 ret lr
121SYM_FUNC_END(cpu_v6_switch_mm)
122
123/*
124 * cpu_v6_set_pte_ext(ptep, pte, ext)
125 *
126 * Set a level 2 translation table entry.
127 *
128 * - ptep - pointer to level 2 translation table entry
129 * (hardware version is stored at -1024 bytes)
130 * - pte - PTE value to store
131 * - ext - value for extended PTE bits
132 */
133 armv6_mt_table cpu_v6
134
135SYM_TYPED_FUNC_START(cpu_v6_set_pte_ext)
136#ifdef CONFIG_MMU
137 armv6_set_pte_ext cpu_v6
138#endif
139 ret lr
140SYM_FUNC_END(cpu_v6_set_pte_ext)
141
142/* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */
143.globl cpu_v6_suspend_size
144.equ cpu_v6_suspend_size, 4 * 6
145#ifdef CONFIG_ARM_CPU_SUSPEND
146SYM_TYPED_FUNC_START(cpu_v6_do_suspend)
147 stmfd sp!, {r4 - r9, lr}
148 mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
149#ifdef CONFIG_MMU
150 mrc p15, 0, r5, c3, c0, 0 @ Domain ID
151 mrc p15, 0, r6, c2, c0, 1 @ Translation table base 1
152#endif
153 mrc p15, 0, r7, c1, c0, 1 @ auxiliary control register
154 mrc p15, 0, r8, c1, c0, 2 @ co-processor access control
155 mrc p15, 0, r9, c1, c0, 0 @ control register
156 stmia r0, {r4 - r9}
157 ldmfd sp!, {r4- r9, pc}
158SYM_FUNC_END(cpu_v6_do_suspend)
159
160SYM_TYPED_FUNC_START(cpu_v6_do_resume)
161 mov ip, #0
162 mcr p15, 0, ip, c7, c14, 0 @ clean+invalidate D cache
163 mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
164 mcr p15, 0, ip, c7, c15, 0 @ clean+invalidate cache
165 mcr p15, 0, ip, c7, c10, 4 @ drain write buffer
166 mcr p15, 0, ip, c13, c0, 1 @ set reserved context ID
167 ldmia r0, {r4 - r9}
168 mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
169#ifdef CONFIG_MMU
170 mcr p15, 0, r5, c3, c0, 0 @ Domain ID
171 ALT_SMP(orr r1, r1, #TTB_FLAGS_SMP)
172 ALT_UP(orr r1, r1, #TTB_FLAGS_UP)
173 mcr p15, 0, r1, c2, c0, 0 @ Translation table base 0
174 mcr p15, 0, r6, c2, c0, 1 @ Translation table base 1
175 mcr p15, 0, ip, c2, c0, 2 @ TTB control register
176#endif
177 mcr p15, 0, r7, c1, c0, 1 @ auxiliary control register
178 mcr p15, 0, r8, c1, c0, 2 @ co-processor access control
179 mcr p15, 0, ip, c7, c5, 4 @ ISB
180 mov r0, r9 @ control register
181 b cpu_resume_mmu
182SYM_FUNC_END(cpu_v6_do_resume)
183#endif
184
185 string cpu_v6_name, "ARMv6-compatible processor"
186
187 .align
188
189/*
190 * __v6_setup
191 *
192 * Initialise TLB, Caches, and MMU state ready to switch the MMU
193 * on. Return in r0 the new CP15 C1 control register setting.
194 *
195 * We automatically detect if we have a Harvard cache, and use the
196 * Harvard cache control instructions insead of the unified cache
197 * control instructions.
198 *
199 * This should be able to cover all ARMv6 cores.
200 *
201 * It is assumed that:
202 * - cache type register is implemented
203 */
204__v6_setup:
205#ifdef CONFIG_SMP
206 ALT_SMP(mrc p15, 0, r0, c1, c0, 1) @ Enable SMP/nAMP mode
207 ALT_UP(nop)
208 orr r0, r0, #0x20
209 ALT_SMP(mcr p15, 0, r0, c1, c0, 1)
210 ALT_UP(nop)
211#endif
212
213 mov r0, #0
214 mcr p15, 0, r0, c7, c14, 0 @ clean+invalidate D cache
215 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
216 mcr p15, 0, r0, c7, c15, 0 @ clean+invalidate cache
217#ifdef CONFIG_MMU
218 mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs
219 mcr p15, 0, r0, c2, c0, 2 @ TTB control register
220 ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP)
221 ALT_UP(orr r4, r4, #TTB_FLAGS_UP)
222 ALT_SMP(orr r8, r8, #TTB_FLAGS_SMP)
223 ALT_UP(orr r8, r8, #TTB_FLAGS_UP)
224 mcr p15, 0, r8, c2, c0, 1 @ load TTB1
225#endif /* CONFIG_MMU */
226 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer and
227 @ complete invalidations
228 adr r5, v6_crval
229 ldmia r5, {r5, r6}
230 ARM_BE8(orr r6, r6, #1 << 25) @ big-endian page tables
231 mrc p15, 0, r0, c1, c0, 0 @ read control register
232 bic r0, r0, r5 @ clear bits them
233 orr r0, r0, r6 @ set them
234#ifdef CONFIG_ARM_ERRATA_364296
235 /*
236 * Workaround for the 364296 ARM1136 r0p2 erratum (possible cache data
237 * corruption with hit-under-miss enabled). The conditional code below
238 * (setting the undocumented bit 31 in the auxiliary control register
239 * and the FI bit in the control register) disables hit-under-miss
240 * without putting the processor into full low interrupt latency mode.
241 */
242 ldr r6, =0x4107b362 @ id for ARM1136 r0p2
243 mrc p15, 0, r5, c0, c0, 0 @ get processor id
244 teq r5, r6 @ check for the faulty core
245 mrceq p15, 0, r5, c1, c0, 1 @ load aux control reg
246 orreq r5, r5, #(1 << 31) @ set the undocumented bit 31
247 mcreq p15, 0, r5, c1, c0, 1 @ write aux control reg
248 orreq r0, r0, #(1 << 21) @ low interrupt latency configuration
249#endif
250 ret lr @ return to head.S:__ret
251
252 /*
253 * V X F I D LR
254 * .... ...E PUI. .T.T 4RVI ZFRS BLDP WCAM
255 * rrrr rrrx xxx0 0101 xxxx xxxx x111 xxxx < forced
256 * 0 110 0011 1.00 .111 1101 < we want
257 */
258 .type v6_crval, #object
259v6_crval:
260 crval clear=0x01e0fb7f, mmuset=0x00c0387d, ucset=0x00c0187c
261
262 __INITDATA
263
264 @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
265 define_processor_functions v6, dabort=v6_early_abort, pabort=v6_pabort, suspend=1
266
267 .section ".rodata"
268
269 string cpu_arch_name, "armv6"
270 string cpu_elf_name, "v6"
271 .align
272
273 .section ".proc.info.init", "a"
274
275 /*
276 * Match any ARMv6 processor core.
277 */
278 .type __v6_proc_info, #object
279__v6_proc_info:
280 .long 0x0007b000
281 .long 0x0007f000
282 ALT_SMP(.long \
283 PMD_TYPE_SECT | \
284 PMD_SECT_AP_WRITE | \
285 PMD_SECT_AP_READ | \
286 PMD_FLAGS_SMP)
287 ALT_UP(.long \
288 PMD_TYPE_SECT | \
289 PMD_SECT_AP_WRITE | \
290 PMD_SECT_AP_READ | \
291 PMD_FLAGS_UP)
292 .long PMD_TYPE_SECT | \
293 PMD_SECT_XN | \
294 PMD_SECT_AP_WRITE | \
295 PMD_SECT_AP_READ
296 initfn __v6_setup, __v6_proc_info
297 .long cpu_arch_name
298 .long cpu_elf_name
299 /* See also feat_v6_fixup() for HWCAP_TLS */
300 .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA|HWCAP_TLS
301 .long cpu_v6_name
302 .long v6_processor_functions
303 .long v6wbi_tlb_fns
304 .long v6_user_fns
305 .long v6_cache_fns
306 .size __v6_proc_info, . - __v6_proc_info
1/*
2 * linux/arch/arm/mm/proc-v6.S
3 *
4 * Copyright (C) 2001 Deep Blue Solutions Ltd.
5 * Modified by Catalin Marinas for noMMU support
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 *
11 * This is the "shell" of the ARMv6 processor support.
12 */
13#include <linux/init.h>
14#include <linux/linkage.h>
15#include <asm/assembler.h>
16#include <asm/asm-offsets.h>
17#include <asm/hwcap.h>
18#include <asm/pgtable-hwdef.h>
19#include <asm/pgtable.h>
20
21#include "proc-macros.S"
22
23#define D_CACHE_LINE_SIZE 32
24
25#define TTB_C (1 << 0)
26#define TTB_S (1 << 1)
27#define TTB_IMP (1 << 2)
28#define TTB_RGN_NC (0 << 3)
29#define TTB_RGN_WBWA (1 << 3)
30#define TTB_RGN_WT (2 << 3)
31#define TTB_RGN_WB (3 << 3)
32
33#define TTB_FLAGS_UP TTB_RGN_WBWA
34#define PMD_FLAGS_UP PMD_SECT_WB
35#define TTB_FLAGS_SMP TTB_RGN_WBWA|TTB_S
36#define PMD_FLAGS_SMP PMD_SECT_WBWA|PMD_SECT_S
37
38ENTRY(cpu_v6_proc_init)
39 ret lr
40
41ENTRY(cpu_v6_proc_fin)
42 mrc p15, 0, r0, c1, c0, 0 @ ctrl register
43 bic r0, r0, #0x1000 @ ...i............
44 bic r0, r0, #0x0006 @ .............ca.
45 mcr p15, 0, r0, c1, c0, 0 @ disable caches
46 ret lr
47
48/*
49 * cpu_v6_reset(loc)
50 *
51 * Perform a soft reset of the system. Put the CPU into the
52 * same state as it would be if it had been reset, and branch
53 * to what would be the reset vector.
54 *
55 * - loc - location to jump to for soft reset
56 */
57 .align 5
58 .pushsection .idmap.text, "ax"
59ENTRY(cpu_v6_reset)
60 mrc p15, 0, r1, c1, c0, 0 @ ctrl register
61 bic r1, r1, #0x1 @ ...............m
62 mcr p15, 0, r1, c1, c0, 0 @ disable MMU
63 mov r1, #0
64 mcr p15, 0, r1, c7, c5, 4 @ ISB
65 ret r0
66ENDPROC(cpu_v6_reset)
67 .popsection
68
69/*
70 * cpu_v6_do_idle()
71 *
72 * Idle the processor (eg, wait for interrupt).
73 *
74 * IRQs are already disabled.
75 */
76ENTRY(cpu_v6_do_idle)
77 mov r1, #0
78 mcr p15, 0, r1, c7, c10, 4 @ DWB - WFI may enter a low-power mode
79 mcr p15, 0, r1, c7, c0, 4 @ wait for interrupt
80 ret lr
81
82ENTRY(cpu_v6_dcache_clean_area)
831: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
84 add r0, r0, #D_CACHE_LINE_SIZE
85 subs r1, r1, #D_CACHE_LINE_SIZE
86 bhi 1b
87 ret lr
88
89/*
90 * cpu_v6_switch_mm(pgd_phys, tsk)
91 *
92 * Set the translation table base pointer to be pgd_phys
93 *
94 * - pgd_phys - physical address of new TTB
95 *
96 * It is assumed that:
97 * - we are not using split page tables
98 */
99ENTRY(cpu_v6_switch_mm)
100#ifdef CONFIG_MMU
101 mov r2, #0
102 mmid r1, r1 @ get mm->context.id
103 ALT_SMP(orr r0, r0, #TTB_FLAGS_SMP)
104 ALT_UP(orr r0, r0, #TTB_FLAGS_UP)
105 mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
106 mcr p15, 0, r2, c7, c10, 4 @ drain write buffer
107 mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
108#ifdef CONFIG_PID_IN_CONTEXTIDR
109 mrc p15, 0, r2, c13, c0, 1 @ read current context ID
110 bic r2, r2, #0xff @ extract the PID
111 and r1, r1, #0xff
112 orr r1, r1, r2 @ insert into new context ID
113#endif
114 mcr p15, 0, r1, c13, c0, 1 @ set context ID
115#endif
116 ret lr
117
118/*
119 * cpu_v6_set_pte_ext(ptep, pte, ext)
120 *
121 * Set a level 2 translation table entry.
122 *
123 * - ptep - pointer to level 2 translation table entry
124 * (hardware version is stored at -1024 bytes)
125 * - pte - PTE value to store
126 * - ext - value for extended PTE bits
127 */
128 armv6_mt_table cpu_v6
129
130ENTRY(cpu_v6_set_pte_ext)
131#ifdef CONFIG_MMU
132 armv6_set_pte_ext cpu_v6
133#endif
134 ret lr
135
136/* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */
137.globl cpu_v6_suspend_size
138.equ cpu_v6_suspend_size, 4 * 6
139#ifdef CONFIG_ARM_CPU_SUSPEND
140ENTRY(cpu_v6_do_suspend)
141 stmfd sp!, {r4 - r9, lr}
142 mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
143#ifdef CONFIG_MMU
144 mrc p15, 0, r5, c3, c0, 0 @ Domain ID
145 mrc p15, 0, r6, c2, c0, 1 @ Translation table base 1
146#endif
147 mrc p15, 0, r7, c1, c0, 1 @ auxiliary control register
148 mrc p15, 0, r8, c1, c0, 2 @ co-processor access control
149 mrc p15, 0, r9, c1, c0, 0 @ control register
150 stmia r0, {r4 - r9}
151 ldmfd sp!, {r4- r9, pc}
152ENDPROC(cpu_v6_do_suspend)
153
154ENTRY(cpu_v6_do_resume)
155 mov ip, #0
156 mcr p15, 0, ip, c7, c14, 0 @ clean+invalidate D cache
157 mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
158 mcr p15, 0, ip, c7, c15, 0 @ clean+invalidate cache
159 mcr p15, 0, ip, c7, c10, 4 @ drain write buffer
160 mcr p15, 0, ip, c13, c0, 1 @ set reserved context ID
161 ldmia r0, {r4 - r9}
162 mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
163#ifdef CONFIG_MMU
164 mcr p15, 0, r5, c3, c0, 0 @ Domain ID
165 ALT_SMP(orr r1, r1, #TTB_FLAGS_SMP)
166 ALT_UP(orr r1, r1, #TTB_FLAGS_UP)
167 mcr p15, 0, r1, c2, c0, 0 @ Translation table base 0
168 mcr p15, 0, r6, c2, c0, 1 @ Translation table base 1
169 mcr p15, 0, ip, c2, c0, 2 @ TTB control register
170#endif
171 mcr p15, 0, r7, c1, c0, 1 @ auxiliary control register
172 mcr p15, 0, r8, c1, c0, 2 @ co-processor access control
173 mcr p15, 0, ip, c7, c5, 4 @ ISB
174 mov r0, r9 @ control register
175 b cpu_resume_mmu
176ENDPROC(cpu_v6_do_resume)
177#endif
178
179 string cpu_v6_name, "ARMv6-compatible processor"
180
181 .align
182
183/*
184 * __v6_setup
185 *
186 * Initialise TLB, Caches, and MMU state ready to switch the MMU
187 * on. Return in r0 the new CP15 C1 control register setting.
188 *
189 * We automatically detect if we have a Harvard cache, and use the
190 * Harvard cache control instructions insead of the unified cache
191 * control instructions.
192 *
193 * This should be able to cover all ARMv6 cores.
194 *
195 * It is assumed that:
196 * - cache type register is implemented
197 */
198__v6_setup:
199#ifdef CONFIG_SMP
200 ALT_SMP(mrc p15, 0, r0, c1, c0, 1) @ Enable SMP/nAMP mode
201 ALT_UP(nop)
202 orr r0, r0, #0x20
203 ALT_SMP(mcr p15, 0, r0, c1, c0, 1)
204 ALT_UP(nop)
205#endif
206
207 mov r0, #0
208 mcr p15, 0, r0, c7, c14, 0 @ clean+invalidate D cache
209 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
210 mcr p15, 0, r0, c7, c15, 0 @ clean+invalidate cache
211#ifdef CONFIG_MMU
212 mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs
213 mcr p15, 0, r0, c2, c0, 2 @ TTB control register
214 ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP)
215 ALT_UP(orr r4, r4, #TTB_FLAGS_UP)
216 ALT_SMP(orr r8, r8, #TTB_FLAGS_SMP)
217 ALT_UP(orr r8, r8, #TTB_FLAGS_UP)
218 mcr p15, 0, r8, c2, c0, 1 @ load TTB1
219#endif /* CONFIG_MMU */
220 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer and
221 @ complete invalidations
222 adr r5, v6_crval
223 ldmia r5, {r5, r6}
224 ARM_BE8(orr r6, r6, #1 << 25) @ big-endian page tables
225 mrc p15, 0, r0, c1, c0, 0 @ read control register
226 bic r0, r0, r5 @ clear bits them
227 orr r0, r0, r6 @ set them
228#ifdef CONFIG_ARM_ERRATA_364296
229 /*
230 * Workaround for the 364296 ARM1136 r0p2 erratum (possible cache data
231 * corruption with hit-under-miss enabled). The conditional code below
232 * (setting the undocumented bit 31 in the auxiliary control register
233 * and the FI bit in the control register) disables hit-under-miss
234 * without putting the processor into full low interrupt latency mode.
235 */
236 ldr r6, =0x4107b362 @ id for ARM1136 r0p2
237 mrc p15, 0, r5, c0, c0, 0 @ get processor id
238 teq r5, r6 @ check for the faulty core
239 mrceq p15, 0, r5, c1, c0, 1 @ load aux control reg
240 orreq r5, r5, #(1 << 31) @ set the undocumented bit 31
241 mcreq p15, 0, r5, c1, c0, 1 @ write aux control reg
242 orreq r0, r0, #(1 << 21) @ low interrupt latency configuration
243#endif
244 ret lr @ return to head.S:__ret
245
246 /*
247 * V X F I D LR
248 * .... ...E PUI. .T.T 4RVI ZFRS BLDP WCAM
249 * rrrr rrrx xxx0 0101 xxxx xxxx x111 xxxx < forced
250 * 0 110 0011 1.00 .111 1101 < we want
251 */
252 .type v6_crval, #object
253v6_crval:
254 crval clear=0x01e0fb7f, mmuset=0x00c0387d, ucset=0x00c0187c
255
256 __INITDATA
257
258 @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
259 define_processor_functions v6, dabort=v6_early_abort, pabort=v6_pabort, suspend=1
260
261 .section ".rodata"
262
263 string cpu_arch_name, "armv6"
264 string cpu_elf_name, "v6"
265 .align
266
267 .section ".proc.info.init", #alloc
268
269 /*
270 * Match any ARMv6 processor core.
271 */
272 .type __v6_proc_info, #object
273__v6_proc_info:
274 .long 0x0007b000
275 .long 0x0007f000
276 ALT_SMP(.long \
277 PMD_TYPE_SECT | \
278 PMD_SECT_AP_WRITE | \
279 PMD_SECT_AP_READ | \
280 PMD_FLAGS_SMP)
281 ALT_UP(.long \
282 PMD_TYPE_SECT | \
283 PMD_SECT_AP_WRITE | \
284 PMD_SECT_AP_READ | \
285 PMD_FLAGS_UP)
286 .long PMD_TYPE_SECT | \
287 PMD_SECT_XN | \
288 PMD_SECT_AP_WRITE | \
289 PMD_SECT_AP_READ
290 initfn __v6_setup, __v6_proc_info
291 .long cpu_arch_name
292 .long cpu_elf_name
293 /* See also feat_v6_fixup() for HWCAP_TLS */
294 .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA|HWCAP_TLS
295 .long cpu_v6_name
296 .long v6_processor_functions
297 .long v6wbi_tlb_fns
298 .long v6_user_fns
299 .long v6_cache_fns
300 .size __v6_proc_info, . - __v6_proc_info