Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*******************************************************************************
3 * Filename: target_core_ua.c
4 *
5 * This file contains logic for SPC-3 Unit Attention emulation
6 *
7 * (c) Copyright 2009-2013 Datera, Inc.
8 *
9 * Nicholas A. Bellinger <nab@kernel.org>
10 *
11 ******************************************************************************/
12
13#include <linux/slab.h>
14#include <linux/spinlock.h>
15#include <scsi/scsi_proto.h>
16
17#include <target/target_core_base.h>
18#include <target/target_core_fabric.h>
19
20#include "target_core_internal.h"
21#include "target_core_alua.h"
22#include "target_core_pr.h"
23#include "target_core_ua.h"
24
25sense_reason_t
26target_scsi3_ua_check(struct se_cmd *cmd)
27{
28 struct se_dev_entry *deve;
29 struct se_session *sess = cmd->se_sess;
30 struct se_node_acl *nacl;
31
32 if (!sess)
33 return 0;
34
35 nacl = sess->se_node_acl;
36 if (!nacl)
37 return 0;
38
39 rcu_read_lock();
40 deve = target_nacl_find_deve(nacl, cmd->orig_fe_lun);
41 if (!deve) {
42 rcu_read_unlock();
43 return 0;
44 }
45 if (list_empty_careful(&deve->ua_list)) {
46 rcu_read_unlock();
47 return 0;
48 }
49 rcu_read_unlock();
50 /*
51 * From sam4r14, section 5.14 Unit attention condition:
52 *
53 * a) if an INQUIRY command enters the enabled command state, the
54 * device server shall process the INQUIRY command and shall neither
55 * report nor clear any unit attention condition;
56 * b) if a REPORT LUNS command enters the enabled command state, the
57 * device server shall process the REPORT LUNS command and shall not
58 * report any unit attention condition;
59 * e) if a REQUEST SENSE command enters the enabled command state while
60 * a unit attention condition exists for the SCSI initiator port
61 * associated with the I_T nexus on which the REQUEST SENSE command
62 * was received, then the device server shall process the command
63 * and either:
64 */
65 switch (cmd->t_task_cdb[0]) {
66 case INQUIRY:
67 case REPORT_LUNS:
68 case REQUEST_SENSE:
69 return 0;
70 default:
71 return TCM_CHECK_CONDITION_UNIT_ATTENTION;
72 }
73}
74
75int core_scsi3_ua_allocate(
76 struct se_dev_entry *deve,
77 u8 asc,
78 u8 ascq)
79{
80 struct se_ua *ua, *ua_p, *ua_tmp;
81
82 ua = kmem_cache_zalloc(se_ua_cache, GFP_ATOMIC);
83 if (!ua) {
84 pr_err("Unable to allocate struct se_ua\n");
85 return -ENOMEM;
86 }
87 INIT_LIST_HEAD(&ua->ua_nacl_list);
88
89 ua->ua_asc = asc;
90 ua->ua_ascq = ascq;
91
92 spin_lock(&deve->ua_lock);
93 list_for_each_entry_safe(ua_p, ua_tmp, &deve->ua_list, ua_nacl_list) {
94 /*
95 * Do not report the same UNIT ATTENTION twice..
96 */
97 if ((ua_p->ua_asc == asc) && (ua_p->ua_ascq == ascq)) {
98 spin_unlock(&deve->ua_lock);
99 kmem_cache_free(se_ua_cache, ua);
100 return 0;
101 }
102 /*
103 * Attach the highest priority Unit Attention to
104 * the head of the list following sam4r14,
105 * Section 5.14 Unit Attention Condition:
106 *
107 * POWER ON, RESET, OR BUS DEVICE RESET OCCURRED highest
108 * POWER ON OCCURRED or
109 * DEVICE INTERNAL RESET
110 * SCSI BUS RESET OCCURRED or
111 * MICROCODE HAS BEEN CHANGED or
112 * protocol specific
113 * BUS DEVICE RESET FUNCTION OCCURRED
114 * I_T NEXUS LOSS OCCURRED
115 * COMMANDS CLEARED BY POWER LOSS NOTIFICATION
116 * all others Lowest
117 *
118 * Each of the ASCQ codes listed above are defined in
119 * the 29h ASC family, see spc4r17 Table D.1
120 */
121 if (ua_p->ua_asc == 0x29) {
122 if ((asc == 0x29) && (ascq > ua_p->ua_ascq))
123 list_add(&ua->ua_nacl_list,
124 &deve->ua_list);
125 else
126 list_add_tail(&ua->ua_nacl_list,
127 &deve->ua_list);
128 } else if (ua_p->ua_asc == 0x2a) {
129 /*
130 * Incoming Family 29h ASCQ codes will override
131 * Family 2AHh ASCQ codes for Unit Attention condition.
132 */
133 if ((asc == 0x29) || (ascq > ua_p->ua_asc))
134 list_add(&ua->ua_nacl_list,
135 &deve->ua_list);
136 else
137 list_add_tail(&ua->ua_nacl_list,
138 &deve->ua_list);
139 } else
140 list_add_tail(&ua->ua_nacl_list,
141 &deve->ua_list);
142 spin_unlock(&deve->ua_lock);
143
144 return 0;
145 }
146 list_add_tail(&ua->ua_nacl_list, &deve->ua_list);
147 spin_unlock(&deve->ua_lock);
148
149 pr_debug("Allocated UNIT ATTENTION, mapped LUN: %llu, ASC:"
150 " 0x%02x, ASCQ: 0x%02x\n", deve->mapped_lun,
151 asc, ascq);
152
153 return 0;
154}
155
156void target_ua_allocate_lun(struct se_node_acl *nacl,
157 u32 unpacked_lun, u8 asc, u8 ascq)
158{
159 struct se_dev_entry *deve;
160
161 if (!nacl)
162 return;
163
164 rcu_read_lock();
165 deve = target_nacl_find_deve(nacl, unpacked_lun);
166 if (!deve) {
167 rcu_read_unlock();
168 return;
169 }
170
171 core_scsi3_ua_allocate(deve, asc, ascq);
172 rcu_read_unlock();
173}
174
175void core_scsi3_ua_release_all(
176 struct se_dev_entry *deve)
177{
178 struct se_ua *ua, *ua_p;
179
180 spin_lock(&deve->ua_lock);
181 list_for_each_entry_safe(ua, ua_p, &deve->ua_list, ua_nacl_list) {
182 list_del(&ua->ua_nacl_list);
183 kmem_cache_free(se_ua_cache, ua);
184 }
185 spin_unlock(&deve->ua_lock);
186}
187
188/*
189 * Dequeue a unit attention from the unit attention list. This function
190 * returns true if the dequeuing succeeded and if *@key, *@asc and *@ascq have
191 * been set.
192 */
193bool core_scsi3_ua_for_check_condition(struct se_cmd *cmd, u8 *key, u8 *asc,
194 u8 *ascq)
195{
196 struct se_device *dev = cmd->se_dev;
197 struct se_dev_entry *deve;
198 struct se_session *sess = cmd->se_sess;
199 struct se_node_acl *nacl;
200 struct se_ua *ua = NULL, *ua_p;
201 int head = 1;
202 bool dev_ua_intlck_clear = (dev->dev_attrib.emulate_ua_intlck_ctrl
203 == TARGET_UA_INTLCK_CTRL_CLEAR);
204
205 if (WARN_ON_ONCE(!sess))
206 return false;
207
208 nacl = sess->se_node_acl;
209 if (WARN_ON_ONCE(!nacl))
210 return false;
211
212 rcu_read_lock();
213 deve = target_nacl_find_deve(nacl, cmd->orig_fe_lun);
214 if (!deve) {
215 rcu_read_unlock();
216 *key = ILLEGAL_REQUEST;
217 *asc = 0x25; /* LOGICAL UNIT NOT SUPPORTED */
218 *ascq = 0;
219 return true;
220 }
221 *key = UNIT_ATTENTION;
222 /*
223 * The highest priority Unit Attentions are placed at the head of the
224 * struct se_dev_entry->ua_list, and will be returned in CHECK_CONDITION +
225 * sense data for the received CDB.
226 */
227 spin_lock(&deve->ua_lock);
228 list_for_each_entry_safe(ua, ua_p, &deve->ua_list, ua_nacl_list) {
229 /*
230 * For ua_intlck_ctrl code not equal to 00b, only report the
231 * highest priority UNIT_ATTENTION and ASC/ASCQ without
232 * clearing it.
233 */
234 if (!dev_ua_intlck_clear) {
235 *asc = ua->ua_asc;
236 *ascq = ua->ua_ascq;
237 break;
238 }
239 /*
240 * Otherwise for the default 00b, release the UNIT ATTENTION
241 * condition. Return the ASC/ASCQ of the highest priority UA
242 * (head of the list) in the outgoing CHECK_CONDITION + sense.
243 */
244 if (head) {
245 *asc = ua->ua_asc;
246 *ascq = ua->ua_ascq;
247 head = 0;
248 }
249 list_del(&ua->ua_nacl_list);
250 kmem_cache_free(se_ua_cache, ua);
251 }
252 spin_unlock(&deve->ua_lock);
253 rcu_read_unlock();
254
255 pr_debug("[%s]: %s UNIT ATTENTION condition with"
256 " INTLCK_CTRL: %d, mapped LUN: %llu, got CDB: 0x%02x"
257 " reported ASC: 0x%02x, ASCQ: 0x%02x\n",
258 nacl->se_tpg->se_tpg_tfo->fabric_name,
259 dev_ua_intlck_clear ? "Releasing" : "Reporting",
260 dev->dev_attrib.emulate_ua_intlck_ctrl,
261 cmd->orig_fe_lun, cmd->t_task_cdb[0], *asc, *ascq);
262
263 return head == 0;
264}
265
266int core_scsi3_ua_clear_for_request_sense(
267 struct se_cmd *cmd,
268 u8 *asc,
269 u8 *ascq)
270{
271 struct se_dev_entry *deve;
272 struct se_session *sess = cmd->se_sess;
273 struct se_node_acl *nacl;
274 struct se_ua *ua = NULL, *ua_p;
275 int head = 1;
276
277 if (!sess)
278 return -EINVAL;
279
280 nacl = sess->se_node_acl;
281 if (!nacl)
282 return -EINVAL;
283
284 rcu_read_lock();
285 deve = target_nacl_find_deve(nacl, cmd->orig_fe_lun);
286 if (!deve) {
287 rcu_read_unlock();
288 return -EINVAL;
289 }
290 if (list_empty_careful(&deve->ua_list)) {
291 rcu_read_unlock();
292 return -EPERM;
293 }
294 /*
295 * The highest priority Unit Attentions are placed at the head of the
296 * struct se_dev_entry->ua_list. The First (and hence highest priority)
297 * ASC/ASCQ will be returned in REQUEST_SENSE payload data for the
298 * matching struct se_lun.
299 *
300 * Once the returning ASC/ASCQ values are set, we go ahead and
301 * release all of the Unit Attention conditions for the associated
302 * struct se_lun.
303 */
304 spin_lock(&deve->ua_lock);
305 list_for_each_entry_safe(ua, ua_p, &deve->ua_list, ua_nacl_list) {
306 if (head) {
307 *asc = ua->ua_asc;
308 *ascq = ua->ua_ascq;
309 head = 0;
310 }
311 list_del(&ua->ua_nacl_list);
312 kmem_cache_free(se_ua_cache, ua);
313 }
314 spin_unlock(&deve->ua_lock);
315 rcu_read_unlock();
316
317 pr_debug("[%s]: Released UNIT ATTENTION condition, mapped"
318 " LUN: %llu, got REQUEST_SENSE reported ASC: 0x%02x,"
319 " ASCQ: 0x%02x\n", nacl->se_tpg->se_tpg_tfo->fabric_name,
320 cmd->orig_fe_lun, *asc, *ascq);
321
322 return (head) ? -EPERM : 0;
323}
1/*******************************************************************************
2 * Filename: target_core_ua.c
3 *
4 * This file contains logic for SPC-3 Unit Attention emulation
5 *
6 * (c) Copyright 2009-2013 Datera, Inc.
7 *
8 * Nicholas A. Bellinger <nab@kernel.org>
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
23 *
24 ******************************************************************************/
25
26#include <linux/slab.h>
27#include <linux/spinlock.h>
28#include <scsi/scsi_proto.h>
29
30#include <target/target_core_base.h>
31#include <target/target_core_fabric.h>
32
33#include "target_core_internal.h"
34#include "target_core_alua.h"
35#include "target_core_pr.h"
36#include "target_core_ua.h"
37
38sense_reason_t
39target_scsi3_ua_check(struct se_cmd *cmd)
40{
41 struct se_dev_entry *deve;
42 struct se_session *sess = cmd->se_sess;
43 struct se_node_acl *nacl;
44
45 if (!sess)
46 return 0;
47
48 nacl = sess->se_node_acl;
49 if (!nacl)
50 return 0;
51
52 rcu_read_lock();
53 deve = target_nacl_find_deve(nacl, cmd->orig_fe_lun);
54 if (!deve) {
55 rcu_read_unlock();
56 return 0;
57 }
58 if (!atomic_read(&deve->ua_count)) {
59 rcu_read_unlock();
60 return 0;
61 }
62 rcu_read_unlock();
63 /*
64 * From sam4r14, section 5.14 Unit attention condition:
65 *
66 * a) if an INQUIRY command enters the enabled command state, the
67 * device server shall process the INQUIRY command and shall neither
68 * report nor clear any unit attention condition;
69 * b) if a REPORT LUNS command enters the enabled command state, the
70 * device server shall process the REPORT LUNS command and shall not
71 * report any unit attention condition;
72 * e) if a REQUEST SENSE command enters the enabled command state while
73 * a unit attention condition exists for the SCSI initiator port
74 * associated with the I_T nexus on which the REQUEST SENSE command
75 * was received, then the device server shall process the command
76 * and either:
77 */
78 switch (cmd->t_task_cdb[0]) {
79 case INQUIRY:
80 case REPORT_LUNS:
81 case REQUEST_SENSE:
82 return 0;
83 default:
84 return TCM_CHECK_CONDITION_UNIT_ATTENTION;
85 }
86}
87
88int core_scsi3_ua_allocate(
89 struct se_dev_entry *deve,
90 u8 asc,
91 u8 ascq)
92{
93 struct se_ua *ua, *ua_p, *ua_tmp;
94
95 ua = kmem_cache_zalloc(se_ua_cache, GFP_ATOMIC);
96 if (!ua) {
97 pr_err("Unable to allocate struct se_ua\n");
98 return -ENOMEM;
99 }
100 INIT_LIST_HEAD(&ua->ua_nacl_list);
101
102 ua->ua_asc = asc;
103 ua->ua_ascq = ascq;
104
105 spin_lock(&deve->ua_lock);
106 list_for_each_entry_safe(ua_p, ua_tmp, &deve->ua_list, ua_nacl_list) {
107 /*
108 * Do not report the same UNIT ATTENTION twice..
109 */
110 if ((ua_p->ua_asc == asc) && (ua_p->ua_ascq == ascq)) {
111 spin_unlock(&deve->ua_lock);
112 kmem_cache_free(se_ua_cache, ua);
113 return 0;
114 }
115 /*
116 * Attach the highest priority Unit Attention to
117 * the head of the list following sam4r14,
118 * Section 5.14 Unit Attention Condition:
119 *
120 * POWER ON, RESET, OR BUS DEVICE RESET OCCURRED highest
121 * POWER ON OCCURRED or
122 * DEVICE INTERNAL RESET
123 * SCSI BUS RESET OCCURRED or
124 * MICROCODE HAS BEEN CHANGED or
125 * protocol specific
126 * BUS DEVICE RESET FUNCTION OCCURRED
127 * I_T NEXUS LOSS OCCURRED
128 * COMMANDS CLEARED BY POWER LOSS NOTIFICATION
129 * all others Lowest
130 *
131 * Each of the ASCQ codes listed above are defined in
132 * the 29h ASC family, see spc4r17 Table D.1
133 */
134 if (ua_p->ua_asc == 0x29) {
135 if ((asc == 0x29) && (ascq > ua_p->ua_ascq))
136 list_add(&ua->ua_nacl_list,
137 &deve->ua_list);
138 else
139 list_add_tail(&ua->ua_nacl_list,
140 &deve->ua_list);
141 } else if (ua_p->ua_asc == 0x2a) {
142 /*
143 * Incoming Family 29h ASCQ codes will override
144 * Family 2AHh ASCQ codes for Unit Attention condition.
145 */
146 if ((asc == 0x29) || (ascq > ua_p->ua_asc))
147 list_add(&ua->ua_nacl_list,
148 &deve->ua_list);
149 else
150 list_add_tail(&ua->ua_nacl_list,
151 &deve->ua_list);
152 } else
153 list_add_tail(&ua->ua_nacl_list,
154 &deve->ua_list);
155 spin_unlock(&deve->ua_lock);
156
157 atomic_inc_mb(&deve->ua_count);
158 return 0;
159 }
160 list_add_tail(&ua->ua_nacl_list, &deve->ua_list);
161 spin_unlock(&deve->ua_lock);
162
163 pr_debug("Allocated UNIT ATTENTION, mapped LUN: %llu, ASC:"
164 " 0x%02x, ASCQ: 0x%02x\n", deve->mapped_lun,
165 asc, ascq);
166
167 atomic_inc_mb(&deve->ua_count);
168 return 0;
169}
170
171void target_ua_allocate_lun(struct se_node_acl *nacl,
172 u32 unpacked_lun, u8 asc, u8 ascq)
173{
174 struct se_dev_entry *deve;
175
176 if (!nacl)
177 return;
178
179 rcu_read_lock();
180 deve = target_nacl_find_deve(nacl, unpacked_lun);
181 if (!deve) {
182 rcu_read_unlock();
183 return;
184 }
185
186 core_scsi3_ua_allocate(deve, asc, ascq);
187 rcu_read_unlock();
188}
189
190void core_scsi3_ua_release_all(
191 struct se_dev_entry *deve)
192{
193 struct se_ua *ua, *ua_p;
194
195 spin_lock(&deve->ua_lock);
196 list_for_each_entry_safe(ua, ua_p, &deve->ua_list, ua_nacl_list) {
197 list_del(&ua->ua_nacl_list);
198 kmem_cache_free(se_ua_cache, ua);
199
200 atomic_dec_mb(&deve->ua_count);
201 }
202 spin_unlock(&deve->ua_lock);
203}
204
205void core_scsi3_ua_for_check_condition(
206 struct se_cmd *cmd,
207 u8 *asc,
208 u8 *ascq)
209{
210 struct se_device *dev = cmd->se_dev;
211 struct se_dev_entry *deve;
212 struct se_session *sess = cmd->se_sess;
213 struct se_node_acl *nacl;
214 struct se_ua *ua = NULL, *ua_p;
215 int head = 1;
216
217 if (!sess)
218 return;
219
220 nacl = sess->se_node_acl;
221 if (!nacl)
222 return;
223
224 rcu_read_lock();
225 deve = target_nacl_find_deve(nacl, cmd->orig_fe_lun);
226 if (!deve) {
227 rcu_read_unlock();
228 return;
229 }
230 if (!atomic_read(&deve->ua_count)) {
231 rcu_read_unlock();
232 return;
233 }
234 /*
235 * The highest priority Unit Attentions are placed at the head of the
236 * struct se_dev_entry->ua_list, and will be returned in CHECK_CONDITION +
237 * sense data for the received CDB.
238 */
239 spin_lock(&deve->ua_lock);
240 list_for_each_entry_safe(ua, ua_p, &deve->ua_list, ua_nacl_list) {
241 /*
242 * For ua_intlck_ctrl code not equal to 00b, only report the
243 * highest priority UNIT_ATTENTION and ASC/ASCQ without
244 * clearing it.
245 */
246 if (dev->dev_attrib.emulate_ua_intlck_ctrl != 0) {
247 *asc = ua->ua_asc;
248 *ascq = ua->ua_ascq;
249 break;
250 }
251 /*
252 * Otherwise for the default 00b, release the UNIT ATTENTION
253 * condition. Return the ASC/ASCQ of the highest priority UA
254 * (head of the list) in the outgoing CHECK_CONDITION + sense.
255 */
256 if (head) {
257 *asc = ua->ua_asc;
258 *ascq = ua->ua_ascq;
259 head = 0;
260 }
261 list_del(&ua->ua_nacl_list);
262 kmem_cache_free(se_ua_cache, ua);
263
264 atomic_dec_mb(&deve->ua_count);
265 }
266 spin_unlock(&deve->ua_lock);
267 rcu_read_unlock();
268
269 pr_debug("[%s]: %s UNIT ATTENTION condition with"
270 " INTLCK_CTRL: %d, mapped LUN: %llu, got CDB: 0x%02x"
271 " reported ASC: 0x%02x, ASCQ: 0x%02x\n",
272 nacl->se_tpg->se_tpg_tfo->get_fabric_name(),
273 (dev->dev_attrib.emulate_ua_intlck_ctrl != 0) ? "Reporting" :
274 "Releasing", dev->dev_attrib.emulate_ua_intlck_ctrl,
275 cmd->orig_fe_lun, cmd->t_task_cdb[0], *asc, *ascq);
276}
277
278int core_scsi3_ua_clear_for_request_sense(
279 struct se_cmd *cmd,
280 u8 *asc,
281 u8 *ascq)
282{
283 struct se_dev_entry *deve;
284 struct se_session *sess = cmd->se_sess;
285 struct se_node_acl *nacl;
286 struct se_ua *ua = NULL, *ua_p;
287 int head = 1;
288
289 if (!sess)
290 return -EINVAL;
291
292 nacl = sess->se_node_acl;
293 if (!nacl)
294 return -EINVAL;
295
296 rcu_read_lock();
297 deve = target_nacl_find_deve(nacl, cmd->orig_fe_lun);
298 if (!deve) {
299 rcu_read_unlock();
300 return -EINVAL;
301 }
302 if (!atomic_read(&deve->ua_count)) {
303 rcu_read_unlock();
304 return -EPERM;
305 }
306 /*
307 * The highest priority Unit Attentions are placed at the head of the
308 * struct se_dev_entry->ua_list. The First (and hence highest priority)
309 * ASC/ASCQ will be returned in REQUEST_SENSE payload data for the
310 * matching struct se_lun.
311 *
312 * Once the returning ASC/ASCQ values are set, we go ahead and
313 * release all of the Unit Attention conditions for the associated
314 * struct se_lun.
315 */
316 spin_lock(&deve->ua_lock);
317 list_for_each_entry_safe(ua, ua_p, &deve->ua_list, ua_nacl_list) {
318 if (head) {
319 *asc = ua->ua_asc;
320 *ascq = ua->ua_ascq;
321 head = 0;
322 }
323 list_del(&ua->ua_nacl_list);
324 kmem_cache_free(se_ua_cache, ua);
325
326 atomic_dec_mb(&deve->ua_count);
327 }
328 spin_unlock(&deve->ua_lock);
329 rcu_read_unlock();
330
331 pr_debug("[%s]: Released UNIT ATTENTION condition, mapped"
332 " LUN: %llu, got REQUEST_SENSE reported ASC: 0x%02x,"
333 " ASCQ: 0x%02x\n", nacl->se_tpg->se_tpg_tfo->get_fabric_name(),
334 cmd->orig_fe_lun, *asc, *ascq);
335
336 return (head) ? -EPERM : 0;
337}