Linux Audio

Check our new training course

Loading...
v6.13.7
   1// SPDX-License-Identifier: GPL-2.0-only
   2/*
   3 * Copyright (C) 2012 Texas Instruments
   4 * Author: Rob Clark <robdclark@gmail.com>
 
 
 
 
 
 
 
 
 
 
 
 
   5 */
   6
   7#include <linux/delay.h>
   8#include <linux/dma-mapping.h>
   9#include <linux/of_graph.h>
  10#include <linux/pm_runtime.h>
  11
  12#include <drm/drm_atomic.h>
  13#include <drm/drm_atomic_helper.h>
  14#include <drm/drm_crtc.h>
  15#include <drm/drm_fb_dma_helper.h>
  16#include <drm/drm_fourcc.h>
  17#include <drm/drm_framebuffer.h>
  18#include <drm/drm_gem_dma_helper.h>
  19#include <drm/drm_modeset_helper_vtables.h>
  20#include <drm/drm_print.h>
  21#include <drm/drm_vblank.h>
  22
  23#include "tilcdc_drv.h"
  24#include "tilcdc_regs.h"
  25
  26#define TILCDC_VBLANK_SAFETY_THRESHOLD_US	1000
  27#define TILCDC_PALETTE_SIZE			32
  28#define TILCDC_PALETTE_FIRST_ENTRY		0x4000
  29
  30struct tilcdc_crtc {
  31	struct drm_crtc base;
  32
  33	struct drm_plane primary;
  34	const struct tilcdc_panel_info *info;
  35	struct drm_pending_vblank_event *event;
  36	struct mutex enable_lock;
  37	bool enabled;
  38	bool shutdown;
  39	wait_queue_head_t frame_done_wq;
  40	bool frame_done;
  41	spinlock_t irq_lock;
  42
  43	unsigned int lcd_fck_rate;
  44
  45	ktime_t last_vblank;
  46	unsigned int hvtotal_us;
  47
 
  48	struct drm_framebuffer *next_fb;
  49
 
 
 
  50	/* Only set if an external encoder is connected */
  51	bool simulate_vesa_sync;
  52
  53	int sync_lost_count;
  54	bool frame_intact;
  55	struct work_struct recover_work;
  56
  57	dma_addr_t palette_dma_handle;
  58	u16 *palette_base;
  59	struct completion palette_loaded;
  60};
  61#define to_tilcdc_crtc(x) container_of(x, struct tilcdc_crtc, base)
  62
 
 
 
 
 
 
 
 
 
 
 
  63static void set_scanout(struct drm_crtc *crtc, struct drm_framebuffer *fb)
  64{
 
  65	struct drm_device *dev = crtc->dev;
  66	struct tilcdc_drm_private *priv = dev->dev_private;
  67	struct drm_gem_dma_object *gem;
  68	dma_addr_t start, end;
  69	u64 dma_base_and_ceiling;
  70
  71	gem = drm_fb_dma_get_gem_obj(fb, 0);
  72
  73	start = gem->dma_addr + fb->offsets[0] +
  74		crtc->y * fb->pitches[0] +
  75		crtc->x * fb->format->cpp[0];
  76
  77	end = start + (crtc->mode.vdisplay * fb->pitches[0]);
  78
  79	/* Write LCDC_DMA_FB_BASE_ADDR_0_REG and LCDC_DMA_FB_CEILING_ADDR_0_REG
  80	 * with a single insruction, if available. This should make it more
  81	 * unlikely that LCDC would fetch the DMA addresses in the middle of
  82	 * an update.
  83	 */
  84	if (priv->rev == 1)
  85		end -= 1;
  86
  87	dma_base_and_ceiling = (u64)end << 32 | start;
  88	tilcdc_write64(dev, LCDC_DMA_FB_BASE_ADDR_0_REG, dma_base_and_ceiling);
 
 
 
 
 
 
  89}
  90
  91/*
  92 * The driver currently only supports only true color formats. For
  93 * true color the palette block is bypassed, but a 32 byte palette
  94 * should still be loaded. The first 16-bit entry must be 0x4000 while
  95 * all other entries must be zeroed.
  96 */
  97static void tilcdc_crtc_load_palette(struct drm_crtc *crtc)
  98{
  99	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
 100	struct drm_device *dev = crtc->dev;
 101	struct tilcdc_drm_private *priv = dev->dev_private;
 102	int ret;
 103
 104	reinit_completion(&tilcdc_crtc->palette_loaded);
 105
 106	/* Tell the LCDC where the palette is located. */
 107	tilcdc_write(dev, LCDC_DMA_FB_BASE_ADDR_0_REG,
 108		     tilcdc_crtc->palette_dma_handle);
 109	tilcdc_write(dev, LCDC_DMA_FB_CEILING_ADDR_0_REG,
 110		     (u32) tilcdc_crtc->palette_dma_handle +
 111		     TILCDC_PALETTE_SIZE - 1);
 112
 113	/* Set dma load mode for palette loading only. */
 114	tilcdc_write_mask(dev, LCDC_RASTER_CTRL_REG,
 115			  LCDC_PALETTE_LOAD_MODE(PALETTE_ONLY),
 116			  LCDC_PALETTE_LOAD_MODE_MASK);
 117
 118	/* Enable DMA Palette Loaded Interrupt */
 119	if (priv->rev == 1)
 120		tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_V1_PL_INT_ENA);
 121	else
 122		tilcdc_write(dev, LCDC_INT_ENABLE_SET_REG, LCDC_V2_PL_INT_ENA);
 123
 124	/* Enable LCDC DMA and wait for palette to be loaded. */
 125	tilcdc_clear_irqstatus(dev, 0xffffffff);
 126	tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
 127
 128	ret = wait_for_completion_timeout(&tilcdc_crtc->palette_loaded,
 129					  msecs_to_jiffies(50));
 130	if (ret == 0)
 131		dev_err(dev->dev, "%s: Palette loading timeout", __func__);
 132
 133	/* Disable LCDC DMA and DMA Palette Loaded Interrupt. */
 134	tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
 135	if (priv->rev == 1)
 136		tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_V1_PL_INT_ENA);
 137	else
 138		tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG, LCDC_V2_PL_INT_ENA);
 139}
 140
 141static void tilcdc_crtc_enable_irqs(struct drm_device *dev)
 142{
 143	struct tilcdc_drm_private *priv = dev->dev_private;
 144
 145	tilcdc_clear_irqstatus(dev, 0xffffffff);
 146
 147	if (priv->rev == 1) {
 148		tilcdc_set(dev, LCDC_RASTER_CTRL_REG,
 149			LCDC_V1_SYNC_LOST_INT_ENA | LCDC_V1_FRAME_DONE_INT_ENA |
 150			LCDC_V1_UNDERFLOW_INT_ENA);
 
 
 151	} else {
 152		tilcdc_write(dev, LCDC_INT_ENABLE_SET_REG,
 153			LCDC_V2_UNDERFLOW_INT_ENA |
 
 154			LCDC_FRAME_DONE | LCDC_SYNC_LOST);
 155	}
 156}
 157
 158static void tilcdc_crtc_disable_irqs(struct drm_device *dev)
 159{
 160	struct tilcdc_drm_private *priv = dev->dev_private;
 161
 162	/* disable irqs that we might have enabled: */
 163	if (priv->rev == 1) {
 164		tilcdc_clear(dev, LCDC_RASTER_CTRL_REG,
 165			LCDC_V1_SYNC_LOST_INT_ENA | LCDC_V1_FRAME_DONE_INT_ENA |
 166			LCDC_V1_UNDERFLOW_INT_ENA | LCDC_V1_PL_INT_ENA);
 167		tilcdc_clear(dev, LCDC_DMA_CTRL_REG,
 168			LCDC_V1_END_OF_FRAME_INT_ENA);
 169	} else {
 170		tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG,
 171			LCDC_V2_UNDERFLOW_INT_ENA | LCDC_V2_PL_INT_ENA |
 172			LCDC_V2_END_OF_FRAME0_INT_ENA |
 173			LCDC_FRAME_DONE | LCDC_SYNC_LOST);
 174	}
 175}
 176
 177static void reset(struct drm_crtc *crtc)
 178{
 179	struct drm_device *dev = crtc->dev;
 180	struct tilcdc_drm_private *priv = dev->dev_private;
 181
 182	if (priv->rev != 2)
 183		return;
 184
 185	tilcdc_set(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET);
 186	usleep_range(250, 1000);
 187	tilcdc_clear(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET);
 188}
 189
 190/*
 191 * Calculate the percentage difference between the requested pixel clock rate
 192 * and the effective rate resulting from calculating the clock divider value.
 193 */
 194static unsigned int tilcdc_pclk_diff(unsigned long rate,
 195				     unsigned long real_rate)
 196{
 197	int r = rate / 100, rr = real_rate / 100;
 198
 199	return (unsigned int)(abs(((rr - r) * 100) / r));
 200}
 201
 202static void tilcdc_crtc_set_clk(struct drm_crtc *crtc)
 203{
 204	struct drm_device *dev = crtc->dev;
 205	struct tilcdc_drm_private *priv = dev->dev_private;
 206	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
 207	unsigned long clk_rate, real_pclk_rate, pclk_rate;
 208	unsigned int clkdiv;
 209	int ret;
 210
 211	clkdiv = 2; /* first try using a standard divider of 2 */
 212
 213	/* mode.clock is in KHz, set_rate wants parameter in Hz */
 214	pclk_rate = crtc->mode.clock * 1000;
 215
 216	ret = clk_set_rate(priv->clk, pclk_rate * clkdiv);
 217	clk_rate = clk_get_rate(priv->clk);
 218	real_pclk_rate = clk_rate / clkdiv;
 219	if (ret < 0 || tilcdc_pclk_diff(pclk_rate, real_pclk_rate) > 5) {
 220		/*
 221		 * If we fail to set the clock rate (some architectures don't
 222		 * use the common clock framework yet and may not implement
 223		 * all the clk API calls for every clock), try the next best
 224		 * thing: adjusting the clock divider, unless clk_get_rate()
 225		 * failed as well.
 226		 */
 227		if (!clk_rate) {
 228			/* Nothing more we can do. Just bail out. */
 229			dev_err(dev->dev,
 230				"failed to set the pixel clock - unable to read current lcdc clock rate\n");
 231			return;
 232		}
 233
 234		clkdiv = DIV_ROUND_CLOSEST(clk_rate, pclk_rate);
 235
 236		/*
 237		 * Emit a warning if the real clock rate resulting from the
 238		 * calculated divider differs much from the requested rate.
 239		 *
 240		 * 5% is an arbitrary value - LCDs are usually quite tolerant
 241		 * about pixel clock rates.
 242		 */
 243		real_pclk_rate = clk_rate / clkdiv;
 244
 245		if (tilcdc_pclk_diff(pclk_rate, real_pclk_rate) > 5) {
 246			dev_warn(dev->dev,
 247				 "effective pixel clock rate (%luHz) differs from the requested rate (%luHz)\n",
 248				 real_pclk_rate, pclk_rate);
 249		}
 250	}
 251
 252	tilcdc_crtc->lcd_fck_rate = clk_rate;
 253
 254	DBG("lcd_clk=%u, mode clock=%d, div=%u",
 255	    tilcdc_crtc->lcd_fck_rate, crtc->mode.clock, clkdiv);
 256
 257	/* Configure the LCD clock divisor. */
 258	tilcdc_write(dev, LCDC_CTRL_REG, LCDC_CLK_DIVISOR(clkdiv) |
 259		     LCDC_RASTER_MODE);
 260
 261	if (priv->rev == 2)
 262		tilcdc_set(dev, LCDC_CLK_ENABLE_REG,
 263				LCDC_V2_DMA_CLK_EN | LCDC_V2_LIDD_CLK_EN |
 264				LCDC_V2_CORE_CLK_EN);
 265}
 266
 267static uint tilcdc_mode_hvtotal(const struct drm_display_mode *mode)
 268{
 269	return (uint) div_u64(1000llu * mode->htotal * mode->vtotal,
 270			      mode->clock);
 271}
 272
 273static void tilcdc_crtc_set_mode(struct drm_crtc *crtc)
 274{
 275	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
 276	struct drm_device *dev = crtc->dev;
 277	struct tilcdc_drm_private *priv = dev->dev_private;
 278	const struct tilcdc_panel_info *info = tilcdc_crtc->info;
 279	uint32_t reg, hbp, hfp, hsw, vbp, vfp, vsw;
 280	struct drm_display_mode *mode = &crtc->state->adjusted_mode;
 281	struct drm_framebuffer *fb = crtc->primary->state->fb;
 282
 283	if (WARN_ON(!info))
 284		return;
 285
 286	if (WARN_ON(!fb))
 287		return;
 288
 289	/* Configure the Burst Size and fifo threshold of DMA: */
 290	reg = tilcdc_read(dev, LCDC_DMA_CTRL_REG) & ~0x00000770;
 291	switch (info->dma_burst_sz) {
 292	case 1:
 293		reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_1);
 294		break;
 295	case 2:
 296		reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_2);
 297		break;
 298	case 4:
 299		reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_4);
 300		break;
 301	case 8:
 302		reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_8);
 303		break;
 304	case 16:
 305		reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_16);
 306		break;
 307	default:
 308		dev_err(dev->dev, "invalid burst size\n");
 309		return;
 310	}
 311	reg |= (info->fifo_th << 8);
 312	tilcdc_write(dev, LCDC_DMA_CTRL_REG, reg);
 313
 314	/* Configure timings: */
 315	hbp = mode->htotal - mode->hsync_end;
 316	hfp = mode->hsync_start - mode->hdisplay;
 317	hsw = mode->hsync_end - mode->hsync_start;
 318	vbp = mode->vtotal - mode->vsync_end;
 319	vfp = mode->vsync_start - mode->vdisplay;
 320	vsw = mode->vsync_end - mode->vsync_start;
 321
 322	DBG("%dx%d, hbp=%u, hfp=%u, hsw=%u, vbp=%u, vfp=%u, vsw=%u",
 323	    mode->hdisplay, mode->vdisplay, hbp, hfp, hsw, vbp, vfp, vsw);
 324
 325	/* Set AC Bias Period and Number of Transitions per Interrupt: */
 326	reg = tilcdc_read(dev, LCDC_RASTER_TIMING_2_REG) & ~0x000fff00;
 327	reg |= LCDC_AC_BIAS_FREQUENCY(info->ac_bias) |
 328		LCDC_AC_BIAS_TRANSITIONS_PER_INT(info->ac_bias_intrpt);
 329
 330	/*
 331	 * subtract one from hfp, hbp, hsw because the hardware uses
 332	 * a value of 0 as 1
 333	 */
 334	if (priv->rev == 2) {
 335		/* clear bits we're going to set */
 336		reg &= ~0x78000033;
 337		reg |= ((hfp-1) & 0x300) >> 8;
 338		reg |= ((hbp-1) & 0x300) >> 4;
 339		reg |= ((hsw-1) & 0x3c0) << 21;
 340	}
 341	tilcdc_write(dev, LCDC_RASTER_TIMING_2_REG, reg);
 342
 343	reg = (((mode->hdisplay >> 4) - 1) << 4) |
 344		(((hbp-1) & 0xff) << 24) |
 345		(((hfp-1) & 0xff) << 16) |
 346		(((hsw-1) & 0x3f) << 10);
 347	if (priv->rev == 2)
 348		reg |= (((mode->hdisplay >> 4) - 1) & 0x40) >> 3;
 349	tilcdc_write(dev, LCDC_RASTER_TIMING_0_REG, reg);
 350
 351	reg = ((mode->vdisplay - 1) & 0x3ff) |
 352		((vbp & 0xff) << 24) |
 353		((vfp & 0xff) << 16) |
 354		(((vsw-1) & 0x3f) << 10);
 355	tilcdc_write(dev, LCDC_RASTER_TIMING_1_REG, reg);
 356
 357	/*
 358	 * be sure to set Bit 10 for the V2 LCDC controller,
 359	 * otherwise limited to 1024 pixels width, stopping
 360	 * 1920x1080 being supported.
 361	 */
 362	if (priv->rev == 2) {
 363		if ((mode->vdisplay - 1) & 0x400) {
 364			tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG,
 365				LCDC_LPP_B10);
 366		} else {
 367			tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG,
 368				LCDC_LPP_B10);
 369		}
 370	}
 371
 372	/* Configure display type: */
 373	reg = tilcdc_read(dev, LCDC_RASTER_CTRL_REG) &
 374		~(LCDC_TFT_MODE | LCDC_MONO_8BIT_MODE | LCDC_MONOCHROME_MODE |
 375		  LCDC_V2_TFT_24BPP_MODE | LCDC_V2_TFT_24BPP_UNPACK |
 376		  0x000ff000 /* Palette Loading Delay bits */);
 377	reg |= LCDC_TFT_MODE; /* no monochrome/passive support */
 378	if (info->tft_alt_mode)
 379		reg |= LCDC_TFT_ALT_ENABLE;
 380	if (priv->rev == 2) {
 381		switch (fb->format->format) {
 382		case DRM_FORMAT_BGR565:
 383		case DRM_FORMAT_RGB565:
 384			break;
 385		case DRM_FORMAT_XBGR8888:
 386		case DRM_FORMAT_XRGB8888:
 387			reg |= LCDC_V2_TFT_24BPP_UNPACK;
 388			fallthrough;
 389		case DRM_FORMAT_BGR888:
 390		case DRM_FORMAT_RGB888:
 391			reg |= LCDC_V2_TFT_24BPP_MODE;
 392			break;
 393		default:
 394			dev_err(dev->dev, "invalid pixel format\n");
 395			return;
 396		}
 397	}
 398	reg |= info->fdd << 12;
 399	tilcdc_write(dev, LCDC_RASTER_CTRL_REG, reg);
 400
 401	if (info->invert_pxl_clk)
 402		tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK);
 403	else
 404		tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK);
 405
 406	if (info->sync_ctrl)
 407		tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL);
 408	else
 409		tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL);
 410
 411	if (info->sync_edge)
 412		tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE);
 413	else
 414		tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE);
 415
 416	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
 417		tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_HSYNC);
 418	else
 419		tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_HSYNC);
 420
 421	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
 422		tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_VSYNC);
 423	else
 424		tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_VSYNC);
 425
 426	if (info->raster_order)
 427		tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER);
 428	else
 429		tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER);
 430
 431	tilcdc_crtc_set_clk(crtc);
 432
 433	tilcdc_crtc_load_palette(crtc);
 434
 435	set_scanout(crtc, fb);
 436
 437	drm_mode_copy(&crtc->hwmode, &crtc->state->adjusted_mode);
 438
 439	tilcdc_crtc->hvtotal_us =
 440		tilcdc_mode_hvtotal(&crtc->hwmode);
 441}
 442
 443static void tilcdc_crtc_enable(struct drm_crtc *crtc)
 444{
 445	struct drm_device *dev = crtc->dev;
 446	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
 447	unsigned long flags;
 448
 
 449	mutex_lock(&tilcdc_crtc->enable_lock);
 450	if (tilcdc_crtc->enabled || tilcdc_crtc->shutdown) {
 451		mutex_unlock(&tilcdc_crtc->enable_lock);
 452		return;
 453	}
 454
 455	pm_runtime_get_sync(dev->dev);
 456
 457	reset(crtc);
 458
 459	tilcdc_crtc_set_mode(crtc);
 460
 461	tilcdc_crtc_enable_irqs(dev);
 462
 463	tilcdc_clear(dev, LCDC_DMA_CTRL_REG, LCDC_DUAL_FRAME_BUFFER_ENABLE);
 464	tilcdc_write_mask(dev, LCDC_RASTER_CTRL_REG,
 465			  LCDC_PALETTE_LOAD_MODE(DATA_ONLY),
 466			  LCDC_PALETTE_LOAD_MODE_MASK);
 467
 468	/* There is no real chance for a race here as the time stamp
 469	 * is taken before the raster DMA is started. The spin-lock is
 470	 * taken to have a memory barrier after taking the time-stamp
 471	 * and to avoid a context switch between taking the stamp and
 472	 * enabling the raster.
 473	 */
 474	spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags);
 475	tilcdc_crtc->last_vblank = ktime_get();
 476	tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
 477	spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags);
 478
 479	drm_crtc_vblank_on(crtc);
 480
 481	tilcdc_crtc->enabled = true;
 482	mutex_unlock(&tilcdc_crtc->enable_lock);
 483}
 484
 485static void tilcdc_crtc_atomic_enable(struct drm_crtc *crtc,
 486				      struct drm_atomic_state *state)
 487{
 488	tilcdc_crtc_enable(crtc);
 489}
 490
 491static void tilcdc_crtc_off(struct drm_crtc *crtc, bool shutdown)
 492{
 493	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
 494	struct drm_device *dev = crtc->dev;
 
 495	int ret;
 496
 497	mutex_lock(&tilcdc_crtc->enable_lock);
 498	if (shutdown)
 499		tilcdc_crtc->shutdown = true;
 500	if (!tilcdc_crtc->enabled) {
 501		mutex_unlock(&tilcdc_crtc->enable_lock);
 502		return;
 503	}
 504	tilcdc_crtc->frame_done = false;
 505	tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
 506
 507	/*
 508	 * Wait for framedone irq which will still come before putting
 509	 * things to sleep..
 510	 */
 511	ret = wait_event_timeout(tilcdc_crtc->frame_done_wq,
 512				 tilcdc_crtc->frame_done,
 513				 msecs_to_jiffies(500));
 514	if (ret == 0)
 515		dev_err(dev->dev, "%s: timeout waiting for framedone\n",
 516			__func__);
 517
 518	drm_crtc_vblank_off(crtc);
 519
 520	spin_lock_irq(&crtc->dev->event_lock);
 
 
 521
 522	if (crtc->state->event) {
 523		drm_crtc_send_vblank_event(crtc, crtc->state->event);
 524		crtc->state->event = NULL;
 
 525	}
 526
 527	spin_unlock_irq(&crtc->dev->event_lock);
 
 
 
 
 528
 529	tilcdc_crtc_disable_irqs(dev);
 530
 531	pm_runtime_put_sync(dev->dev);
 532
 533	tilcdc_crtc->enabled = false;
 534	mutex_unlock(&tilcdc_crtc->enable_lock);
 535}
 536
 537static void tilcdc_crtc_disable(struct drm_crtc *crtc)
 538{
 
 539	tilcdc_crtc_off(crtc, false);
 540}
 541
 542static void tilcdc_crtc_atomic_disable(struct drm_crtc *crtc,
 543				       struct drm_atomic_state *state)
 544{
 545	tilcdc_crtc_disable(crtc);
 546}
 547
 548static void tilcdc_crtc_atomic_flush(struct drm_crtc *crtc,
 549				     struct drm_atomic_state *state)
 550{
 551	if (!crtc->state->event)
 552		return;
 553
 554	spin_lock_irq(&crtc->dev->event_lock);
 555	drm_crtc_send_vblank_event(crtc, crtc->state->event);
 556	crtc->state->event = NULL;
 557	spin_unlock_irq(&crtc->dev->event_lock);
 558}
 559
 560void tilcdc_crtc_shutdown(struct drm_crtc *crtc)
 561{
 562	tilcdc_crtc_off(crtc, true);
 563}
 564
 565static bool tilcdc_crtc_is_on(struct drm_crtc *crtc)
 566{
 567	return crtc->state && crtc->state->enable && crtc->state->active;
 568}
 569
 570static void tilcdc_crtc_recover_work(struct work_struct *work)
 571{
 572	struct tilcdc_crtc *tilcdc_crtc =
 573		container_of(work, struct tilcdc_crtc, recover_work);
 574	struct drm_crtc *crtc = &tilcdc_crtc->base;
 575
 576	dev_info(crtc->dev->dev, "%s: Reset CRTC", __func__);
 577
 578	drm_modeset_lock(&crtc->mutex, NULL);
 579
 580	if (!tilcdc_crtc_is_on(crtc))
 581		goto out;
 582
 583	tilcdc_crtc_disable(crtc);
 584	tilcdc_crtc_enable(crtc);
 585out:
 586	drm_modeset_unlock(&crtc->mutex);
 587}
 588
 589static void tilcdc_crtc_destroy(struct drm_crtc *crtc)
 590{
 
 591	struct tilcdc_drm_private *priv = crtc->dev->dev_private;
 592
 593	tilcdc_crtc_shutdown(crtc);
 
 
 594
 595	flush_workqueue(priv->wq);
 596
 597	of_node_put(crtc->port);
 598	drm_crtc_cleanup(crtc);
 
 599}
 600
 601int tilcdc_crtc_update_fb(struct drm_crtc *crtc,
 602		struct drm_framebuffer *fb,
 603		struct drm_pending_vblank_event *event)
 604{
 605	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
 606	struct drm_device *dev = crtc->dev;
 
 
 
 607
 608	if (tilcdc_crtc->event) {
 609		dev_err(dev->dev, "already pending page flip!\n");
 610		return -EBUSY;
 611	}
 612
 613	tilcdc_crtc->event = event;
 614
 615	mutex_lock(&tilcdc_crtc->enable_lock);
 616
 617	if (tilcdc_crtc->enabled) {
 618		unsigned long flags;
 
 619		ktime_t next_vblank;
 620		s64 tdiff;
 621
 622		spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags);
 623
 624		next_vblank = ktime_add_us(tilcdc_crtc->last_vblank,
 625					   tilcdc_crtc->hvtotal_us);
 
 626		tdiff = ktime_to_us(ktime_sub(next_vblank, ktime_get()));
 627
 628		if (tdiff < TILCDC_VBLANK_SAFETY_THRESHOLD_US)
 629			tilcdc_crtc->next_fb = fb;
 630		else
 631			set_scanout(crtc, fb);
 632
 633		spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags);
 634	}
 635
 636	mutex_unlock(&tilcdc_crtc->enable_lock);
 
 
 
 
 
 637
 638	return 0;
 639}
 640
 641static bool tilcdc_crtc_mode_fixup(struct drm_crtc *crtc,
 642		const struct drm_display_mode *mode,
 643		struct drm_display_mode *adjusted_mode)
 644{
 645	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
 646
 647	if (!tilcdc_crtc->simulate_vesa_sync)
 648		return true;
 649
 650	/*
 651	 * tilcdc does not generate VESA-compliant sync but aligns
 652	 * VS on the second edge of HS instead of first edge.
 653	 * We use adjusted_mode, to fixup sync by aligning both rising
 654	 * edges and add HSKEW offset to fix the sync.
 655	 */
 656	adjusted_mode->hskew = mode->hsync_end - mode->hsync_start;
 657	adjusted_mode->flags |= DRM_MODE_FLAG_HSKEW;
 658
 659	if (mode->flags & DRM_MODE_FLAG_NHSYNC) {
 660		adjusted_mode->flags |= DRM_MODE_FLAG_PHSYNC;
 661		adjusted_mode->flags &= ~DRM_MODE_FLAG_NHSYNC;
 662	} else {
 663		adjusted_mode->flags |= DRM_MODE_FLAG_NHSYNC;
 664		adjusted_mode->flags &= ~DRM_MODE_FLAG_PHSYNC;
 665	}
 666
 667	return true;
 668}
 669
 670static int tilcdc_crtc_atomic_check(struct drm_crtc *crtc,
 671				    struct drm_atomic_state *state)
 672{
 673	struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state,
 674									  crtc);
 
 675	/* If we are not active we don't care */
 676	if (!crtc_state->active)
 677		return 0;
 678
 679	if (state->planes[0].ptr != crtc->primary ||
 680	    state->planes[0].state == NULL ||
 681	    state->planes[0].state->crtc != crtc) {
 682		dev_dbg(crtc->dev->dev, "CRTC primary plane must be present");
 683		return -EINVAL;
 684	}
 685
 
 
 
 
 
 
 686	return 0;
 687}
 688
 689static int tilcdc_crtc_enable_vblank(struct drm_crtc *crtc)
 690{
 691	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
 692	struct drm_device *dev = crtc->dev;
 693	struct tilcdc_drm_private *priv = dev->dev_private;
 694	unsigned long flags;
 695
 696	spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags);
 697
 698	tilcdc_clear_irqstatus(dev, LCDC_END_OF_FRAME0);
 699
 700	if (priv->rev == 1)
 701		tilcdc_set(dev, LCDC_DMA_CTRL_REG,
 702			   LCDC_V1_END_OF_FRAME_INT_ENA);
 703	else
 704		tilcdc_set(dev, LCDC_INT_ENABLE_SET_REG,
 705			   LCDC_V2_END_OF_FRAME0_INT_ENA);
 706
 707	spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags);
 708
 709	return 0;
 710}
 
 
 
 
 711
 712static void tilcdc_crtc_disable_vblank(struct drm_crtc *crtc)
 713{
 714	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
 715	struct drm_device *dev = crtc->dev;
 716	struct tilcdc_drm_private *priv = dev->dev_private;
 717	unsigned long flags;
 718
 719	spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags);
 720
 721	if (priv->rev == 1)
 722		tilcdc_clear(dev, LCDC_DMA_CTRL_REG,
 723			     LCDC_V1_END_OF_FRAME_INT_ENA);
 724	else
 725		tilcdc_clear(dev, LCDC_INT_ENABLE_SET_REG,
 726			     LCDC_V2_END_OF_FRAME0_INT_ENA);
 727
 728	spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags);
 729}
 730
 731static void tilcdc_crtc_reset(struct drm_crtc *crtc)
 732{
 733	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
 734	struct drm_device *dev = crtc->dev;
 735	int ret;
 736
 737	drm_atomic_helper_crtc_reset(crtc);
 738
 739	/* Turn the raster off if it for some reason is on. */
 740	pm_runtime_get_sync(dev->dev);
 741	if (tilcdc_read(dev, LCDC_RASTER_CTRL_REG) & LCDC_RASTER_ENABLE) {
 742		/* Enable DMA Frame Done Interrupt */
 743		tilcdc_write(dev, LCDC_INT_ENABLE_SET_REG, LCDC_FRAME_DONE);
 744		tilcdc_clear_irqstatus(dev, 0xffffffff);
 745
 746		tilcdc_crtc->frame_done = false;
 747		tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
 748
 749		ret = wait_event_timeout(tilcdc_crtc->frame_done_wq,
 750					 tilcdc_crtc->frame_done,
 751					 msecs_to_jiffies(500));
 752		if (ret == 0)
 753			dev_err(dev->dev, "%s: timeout waiting for framedone\n",
 754				__func__);
 755	}
 756	pm_runtime_put_sync(dev->dev);
 757}
 758
 759static const struct drm_crtc_funcs tilcdc_crtc_funcs = {
 760	.destroy        = tilcdc_crtc_destroy,
 761	.set_config     = drm_atomic_helper_set_config,
 762	.page_flip      = drm_atomic_helper_page_flip,
 763	.reset		= tilcdc_crtc_reset,
 764	.atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
 765	.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
 766	.enable_vblank	= tilcdc_crtc_enable_vblank,
 767	.disable_vblank	= tilcdc_crtc_disable_vblank,
 768};
 769
 770static enum drm_mode_status
 771tilcdc_crtc_mode_valid(struct drm_crtc *crtc,
 772		       const struct drm_display_mode *mode)
 773{
 774	struct tilcdc_drm_private *priv = crtc->dev->dev_private;
 775	unsigned int bandwidth;
 776	uint32_t hbp, hfp, hsw, vbp, vfp, vsw;
 777
 778	/*
 779	 * check to see if the width is within the range that
 780	 * the LCD Controller physically supports
 781	 */
 782	if (mode->hdisplay > priv->max_width)
 783		return MODE_VIRTUAL_X;
 784
 785	/* width must be multiple of 16 */
 786	if (mode->hdisplay & 0xf)
 787		return MODE_VIRTUAL_X;
 788
 789	if (mode->vdisplay > 2048)
 790		return MODE_VIRTUAL_Y;
 791
 792	DBG("Processing mode %dx%d@%d with pixel clock %d",
 793		mode->hdisplay, mode->vdisplay,
 794		drm_mode_vrefresh(mode), mode->clock);
 795
 796	hbp = mode->htotal - mode->hsync_end;
 797	hfp = mode->hsync_start - mode->hdisplay;
 798	hsw = mode->hsync_end - mode->hsync_start;
 799	vbp = mode->vtotal - mode->vsync_end;
 800	vfp = mode->vsync_start - mode->vdisplay;
 801	vsw = mode->vsync_end - mode->vsync_start;
 802
 803	if ((hbp-1) & ~0x3ff) {
 804		DBG("Pruning mode: Horizontal Back Porch out of range");
 805		return MODE_HBLANK_WIDE;
 806	}
 807
 808	if ((hfp-1) & ~0x3ff) {
 809		DBG("Pruning mode: Horizontal Front Porch out of range");
 810		return MODE_HBLANK_WIDE;
 811	}
 812
 813	if ((hsw-1) & ~0x3ff) {
 814		DBG("Pruning mode: Horizontal Sync Width out of range");
 815		return MODE_HSYNC_WIDE;
 816	}
 817
 818	if (vbp & ~0xff) {
 819		DBG("Pruning mode: Vertical Back Porch out of range");
 820		return MODE_VBLANK_WIDE;
 821	}
 822
 823	if (vfp & ~0xff) {
 824		DBG("Pruning mode: Vertical Front Porch out of range");
 825		return MODE_VBLANK_WIDE;
 826	}
 827
 828	if ((vsw-1) & ~0x3f) {
 829		DBG("Pruning mode: Vertical Sync Width out of range");
 830		return MODE_VSYNC_WIDE;
 831	}
 832
 833	/*
 834	 * some devices have a maximum allowed pixel clock
 835	 * configured from the DT
 836	 */
 837	if (mode->clock > priv->max_pixelclock) {
 838		DBG("Pruning mode: pixel clock too high");
 839		return MODE_CLOCK_HIGH;
 840	}
 841
 842	/*
 843	 * some devices further limit the max horizontal resolution
 844	 * configured from the DT
 845	 */
 846	if (mode->hdisplay > priv->max_width)
 847		return MODE_BAD_WIDTH;
 848
 849	/* filter out modes that would require too much memory bandwidth: */
 850	bandwidth = mode->hdisplay * mode->vdisplay *
 851		drm_mode_vrefresh(mode);
 852	if (bandwidth > priv->max_bandwidth) {
 853		DBG("Pruning mode: exceeds defined bandwidth limit");
 854		return MODE_BAD;
 855	}
 856
 857	return MODE_OK;
 858}
 859
 860static const struct drm_crtc_helper_funcs tilcdc_crtc_helper_funcs = {
 861	.mode_valid	= tilcdc_crtc_mode_valid,
 862	.mode_fixup	= tilcdc_crtc_mode_fixup,
 863	.atomic_check	= tilcdc_crtc_atomic_check,
 864	.atomic_enable	= tilcdc_crtc_atomic_enable,
 865	.atomic_disable	= tilcdc_crtc_atomic_disable,
 866	.atomic_flush	= tilcdc_crtc_atomic_flush,
 867};
 868
 869void tilcdc_crtc_set_panel_info(struct drm_crtc *crtc,
 870		const struct tilcdc_panel_info *info)
 871{
 872	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
 873	tilcdc_crtc->info = info;
 874}
 875
 876void tilcdc_crtc_set_simulate_vesa_sync(struct drm_crtc *crtc,
 877					bool simulate_vesa_sync)
 878{
 879	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
 880
 881	tilcdc_crtc->simulate_vesa_sync = simulate_vesa_sync;
 882}
 883
 884void tilcdc_crtc_update_clk(struct drm_crtc *crtc)
 885{
 886	struct drm_device *dev = crtc->dev;
 887	struct tilcdc_drm_private *priv = dev->dev_private;
 888	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
 889
 890	drm_modeset_lock(&crtc->mutex, NULL);
 891	if (tilcdc_crtc->lcd_fck_rate != clk_get_rate(priv->clk)) {
 892		if (tilcdc_crtc_is_on(crtc)) {
 893			pm_runtime_get_sync(dev->dev);
 894			tilcdc_crtc_disable(crtc);
 895
 896			tilcdc_crtc_set_clk(crtc);
 897
 898			tilcdc_crtc_enable(crtc);
 899			pm_runtime_put_sync(dev->dev);
 900		}
 901	}
 902	drm_modeset_unlock(&crtc->mutex);
 903}
 904
 905#define SYNC_LOST_COUNT_LIMIT 50
 906
 907irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc)
 908{
 909	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
 910	struct drm_device *dev = crtc->dev;
 911	struct tilcdc_drm_private *priv = dev->dev_private;
 912	uint32_t stat, reg;
 913
 914	stat = tilcdc_read_irqstatus(dev);
 915	tilcdc_clear_irqstatus(dev, stat);
 916
 917	if (stat & LCDC_END_OF_FRAME0) {
 
 918		bool skip_event = false;
 919		ktime_t now;
 920
 921		now = ktime_get();
 922
 923		spin_lock(&tilcdc_crtc->irq_lock);
 
 
 924
 925		tilcdc_crtc->last_vblank = now;
 926
 927		if (tilcdc_crtc->next_fb) {
 928			set_scanout(crtc, tilcdc_crtc->next_fb);
 929			tilcdc_crtc->next_fb = NULL;
 930			skip_event = true;
 931		}
 932
 933		spin_unlock(&tilcdc_crtc->irq_lock);
 934
 935		drm_crtc_handle_vblank(crtc);
 936
 937		if (!skip_event) {
 938			struct drm_pending_vblank_event *event;
 939
 940			spin_lock(&dev->event_lock);
 941
 942			event = tilcdc_crtc->event;
 943			tilcdc_crtc->event = NULL;
 944			if (event)
 945				drm_crtc_send_vblank_event(crtc, event);
 946
 947			spin_unlock(&dev->event_lock);
 948		}
 949
 950		if (tilcdc_crtc->frame_intact)
 951			tilcdc_crtc->sync_lost_count = 0;
 952		else
 953			tilcdc_crtc->frame_intact = true;
 954	}
 955
 956	if (stat & LCDC_FIFO_UNDERFLOW)
 957		dev_err_ratelimited(dev->dev, "%s(0x%08x): FIFO underflow",
 958				    __func__, stat);
 959
 960	if (stat & LCDC_PL_LOAD_DONE) {
 961		complete(&tilcdc_crtc->palette_loaded);
 962		if (priv->rev == 1)
 963			tilcdc_clear(dev, LCDC_RASTER_CTRL_REG,
 964				     LCDC_V1_PL_INT_ENA);
 965		else
 966			tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG,
 967				     LCDC_V2_PL_INT_ENA);
 968	}
 969
 970	if (stat & LCDC_SYNC_LOST) {
 971		dev_err_ratelimited(dev->dev, "%s(0x%08x): Sync lost",
 972				    __func__, stat);
 973		tilcdc_crtc->frame_intact = false;
 974		if (priv->rev == 1) {
 975			reg = tilcdc_read(dev, LCDC_RASTER_CTRL_REG);
 976			if (reg & LCDC_RASTER_ENABLE) {
 977				tilcdc_clear(dev, LCDC_RASTER_CTRL_REG,
 978					     LCDC_RASTER_ENABLE);
 979				tilcdc_set(dev, LCDC_RASTER_CTRL_REG,
 980					   LCDC_RASTER_ENABLE);
 981			}
 982		} else {
 983			if (tilcdc_crtc->sync_lost_count++ >
 984			    SYNC_LOST_COUNT_LIMIT) {
 985				dev_err(dev->dev,
 986					"%s(0x%08x): Sync lost flood detected, recovering",
 987					__func__, stat);
 988				queue_work(system_wq,
 989					   &tilcdc_crtc->recover_work);
 990				tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG,
 991					     LCDC_SYNC_LOST);
 992				tilcdc_crtc->sync_lost_count = 0;
 993			}
 994		}
 995	}
 996
 997	if (stat & LCDC_FRAME_DONE) {
 998		tilcdc_crtc->frame_done = true;
 999		wake_up(&tilcdc_crtc->frame_done_wq);
1000		/* rev 1 lcdc appears to hang if irq is not disabled here */
1001		if (priv->rev == 1)
1002			tilcdc_clear(dev, LCDC_RASTER_CTRL_REG,
1003				     LCDC_V1_FRAME_DONE_INT_ENA);
1004	}
1005
1006	/* For revision 2 only */
1007	if (priv->rev == 2) {
1008		/* Indicate to LCDC that the interrupt service routine has
1009		 * completed, see 13.3.6.1.6 in AM335x TRM.
1010		 */
1011		tilcdc_write(dev, LCDC_END_OF_INT_IND_REG, 0);
1012	}
1013
1014	return IRQ_HANDLED;
1015}
1016
1017int tilcdc_crtc_create(struct drm_device *dev)
1018{
1019	struct tilcdc_drm_private *priv = dev->dev_private;
1020	struct tilcdc_crtc *tilcdc_crtc;
1021	struct drm_crtc *crtc;
1022	int ret;
1023
1024	tilcdc_crtc = devm_kzalloc(dev->dev, sizeof(*tilcdc_crtc), GFP_KERNEL);
1025	if (!tilcdc_crtc)
 
1026		return -ENOMEM;
 
1027
1028	init_completion(&tilcdc_crtc->palette_loaded);
1029	tilcdc_crtc->palette_base = dmam_alloc_coherent(dev->dev,
1030					TILCDC_PALETTE_SIZE,
1031					&tilcdc_crtc->palette_dma_handle,
1032					GFP_KERNEL | __GFP_ZERO);
1033	if (!tilcdc_crtc->palette_base)
1034		return -ENOMEM;
1035	*tilcdc_crtc->palette_base = TILCDC_PALETTE_FIRST_ENTRY;
1036
1037	crtc = &tilcdc_crtc->base;
1038
1039	ret = tilcdc_plane_init(dev, &tilcdc_crtc->primary);
1040	if (ret < 0)
1041		goto fail;
1042
1043	mutex_init(&tilcdc_crtc->enable_lock);
1044
1045	init_waitqueue_head(&tilcdc_crtc->frame_done_wq);
1046
 
 
 
1047	spin_lock_init(&tilcdc_crtc->irq_lock);
1048	INIT_WORK(&tilcdc_crtc->recover_work, tilcdc_crtc_recover_work);
1049
1050	ret = drm_crtc_init_with_planes(dev, crtc,
1051					&tilcdc_crtc->primary,
1052					NULL,
1053					&tilcdc_crtc_funcs,
1054					"tilcdc crtc");
1055	if (ret < 0)
1056		goto fail;
1057
1058	drm_crtc_helper_add(crtc, &tilcdc_crtc_helper_funcs);
1059
1060	if (priv->is_componentized) {
1061		crtc->port = of_graph_get_port_by_id(dev->dev->of_node, 0);
 
 
 
 
 
 
 
 
 
1062		if (!crtc->port) { /* This should never happen */
1063			dev_err(dev->dev, "Port node not found in %pOF\n",
1064				dev->dev->of_node);
1065			ret = -EINVAL;
1066			goto fail;
1067		}
1068	}
1069
1070	priv->crtc = crtc;
1071	return 0;
1072
1073fail:
1074	tilcdc_crtc_destroy(crtc);
1075	return ret;
1076}
v4.10.11
 
   1/*
   2 * Copyright (C) 2012 Texas Instruments
   3 * Author: Rob Clark <robdclark@gmail.com>
   4 *
   5 * This program is free software; you can redistribute it and/or modify it
   6 * under the terms of the GNU General Public License version 2 as published by
   7 * the Free Software Foundation.
   8 *
   9 * This program is distributed in the hope that it will be useful, but WITHOUT
  10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  11 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  12 * more details.
  13 *
  14 * You should have received a copy of the GNU General Public License along with
  15 * this program.  If not, see <http://www.gnu.org/licenses/>.
  16 */
  17
 
 
 
 
 
  18#include <drm/drm_atomic.h>
  19#include <drm/drm_atomic_helper.h>
  20#include <drm/drm_crtc.h>
  21#include <drm/drm_flip_work.h>
  22#include <drm/drm_plane_helper.h>
  23#include <linux/workqueue.h>
  24#include <linux/completion.h>
  25#include <linux/dma-mapping.h>
 
 
  26
  27#include "tilcdc_drv.h"
  28#include "tilcdc_regs.h"
  29
  30#define TILCDC_VBLANK_SAFETY_THRESHOLD_US	1000
  31#define TILCDC_PALETTE_SIZE			32
  32#define TILCDC_PALETTE_FIRST_ENTRY		0x4000
  33
  34struct tilcdc_crtc {
  35	struct drm_crtc base;
  36
  37	struct drm_plane primary;
  38	const struct tilcdc_panel_info *info;
  39	struct drm_pending_vblank_event *event;
  40	struct mutex enable_lock;
  41	bool enabled;
  42	bool shutdown;
  43	wait_queue_head_t frame_done_wq;
  44	bool frame_done;
  45	spinlock_t irq_lock;
  46
  47	unsigned int lcd_fck_rate;
  48
  49	ktime_t last_vblank;
 
  50
  51	struct drm_framebuffer *curr_fb;
  52	struct drm_framebuffer *next_fb;
  53
  54	/* for deferred fb unref's: */
  55	struct drm_flip_work unref_work;
  56
  57	/* Only set if an external encoder is connected */
  58	bool simulate_vesa_sync;
  59
  60	int sync_lost_count;
  61	bool frame_intact;
  62	struct work_struct recover_work;
  63
  64	dma_addr_t palette_dma_handle;
  65	u16 *palette_base;
  66	struct completion palette_loaded;
  67};
  68#define to_tilcdc_crtc(x) container_of(x, struct tilcdc_crtc, base)
  69
  70static void unref_worker(struct drm_flip_work *work, void *val)
  71{
  72	struct tilcdc_crtc *tilcdc_crtc =
  73		container_of(work, struct tilcdc_crtc, unref_work);
  74	struct drm_device *dev = tilcdc_crtc->base.dev;
  75
  76	mutex_lock(&dev->mode_config.mutex);
  77	drm_framebuffer_unreference(val);
  78	mutex_unlock(&dev->mode_config.mutex);
  79}
  80
  81static void set_scanout(struct drm_crtc *crtc, struct drm_framebuffer *fb)
  82{
  83	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
  84	struct drm_device *dev = crtc->dev;
  85	struct tilcdc_drm_private *priv = dev->dev_private;
  86	struct drm_gem_cma_object *gem;
  87	dma_addr_t start, end;
  88	u64 dma_base_and_ceiling;
  89
  90	gem = drm_fb_cma_get_gem_obj(fb, 0);
  91
  92	start = gem->paddr + fb->offsets[0] +
  93		crtc->y * fb->pitches[0] +
  94		crtc->x * drm_format_plane_cpp(fb->pixel_format, 0);
  95
  96	end = start + (crtc->mode.vdisplay * fb->pitches[0]);
  97
  98	/* Write LCDC_DMA_FB_BASE_ADDR_0_REG and LCDC_DMA_FB_CEILING_ADDR_0_REG
  99	 * with a single insruction, if available. This should make it more
 100	 * unlikely that LCDC would fetch the DMA addresses in the middle of
 101	 * an update.
 102	 */
 103	if (priv->rev == 1)
 104		end -= 1;
 105
 106	dma_base_and_ceiling = (u64)end << 32 | start;
 107	tilcdc_write64(dev, LCDC_DMA_FB_BASE_ADDR_0_REG, dma_base_and_ceiling);
 108
 109	if (tilcdc_crtc->curr_fb)
 110		drm_flip_work_queue(&tilcdc_crtc->unref_work,
 111			tilcdc_crtc->curr_fb);
 112
 113	tilcdc_crtc->curr_fb = fb;
 114}
 115
 116/*
 117 * The driver currently only supports only true color formats. For
 118 * true color the palette block is bypassed, but a 32 byte palette
 119 * should still be loaded. The first 16-bit entry must be 0x4000 while
 120 * all other entries must be zeroed.
 121 */
 122static void tilcdc_crtc_load_palette(struct drm_crtc *crtc)
 123{
 124	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
 125	struct drm_device *dev = crtc->dev;
 126	struct tilcdc_drm_private *priv = dev->dev_private;
 127	int ret;
 128
 129	reinit_completion(&tilcdc_crtc->palette_loaded);
 130
 131	/* Tell the LCDC where the palette is located. */
 132	tilcdc_write(dev, LCDC_DMA_FB_BASE_ADDR_0_REG,
 133		     tilcdc_crtc->palette_dma_handle);
 134	tilcdc_write(dev, LCDC_DMA_FB_CEILING_ADDR_0_REG,
 135		     (u32) tilcdc_crtc->palette_dma_handle +
 136		     TILCDC_PALETTE_SIZE - 1);
 137
 138	/* Set dma load mode for palette loading only. */
 139	tilcdc_write_mask(dev, LCDC_RASTER_CTRL_REG,
 140			  LCDC_PALETTE_LOAD_MODE(PALETTE_ONLY),
 141			  LCDC_PALETTE_LOAD_MODE_MASK);
 142
 143	/* Enable DMA Palette Loaded Interrupt */
 144	if (priv->rev == 1)
 145		tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_V1_PL_INT_ENA);
 146	else
 147		tilcdc_write(dev, LCDC_INT_ENABLE_SET_REG, LCDC_V2_PL_INT_ENA);
 148
 149	/* Enable LCDC DMA and wait for palette to be loaded. */
 150	tilcdc_clear_irqstatus(dev, 0xffffffff);
 151	tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
 152
 153	ret = wait_for_completion_timeout(&tilcdc_crtc->palette_loaded,
 154					  msecs_to_jiffies(50));
 155	if (ret == 0)
 156		dev_err(dev->dev, "%s: Palette loading timeout", __func__);
 157
 158	/* Disable LCDC DMA and DMA Palette Loaded Interrupt. */
 159	tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
 160	if (priv->rev == 1)
 161		tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_V1_PL_INT_ENA);
 162	else
 163		tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG, LCDC_V2_PL_INT_ENA);
 164}
 165
 166static void tilcdc_crtc_enable_irqs(struct drm_device *dev)
 167{
 168	struct tilcdc_drm_private *priv = dev->dev_private;
 169
 170	tilcdc_clear_irqstatus(dev, 0xffffffff);
 171
 172	if (priv->rev == 1) {
 173		tilcdc_set(dev, LCDC_RASTER_CTRL_REG,
 174			LCDC_V1_SYNC_LOST_INT_ENA | LCDC_V1_FRAME_DONE_INT_ENA |
 175			LCDC_V1_UNDERFLOW_INT_ENA);
 176		tilcdc_set(dev, LCDC_DMA_CTRL_REG,
 177			LCDC_V1_END_OF_FRAME_INT_ENA);
 178	} else {
 179		tilcdc_write(dev, LCDC_INT_ENABLE_SET_REG,
 180			LCDC_V2_UNDERFLOW_INT_ENA |
 181			LCDC_V2_END_OF_FRAME0_INT_ENA |
 182			LCDC_FRAME_DONE | LCDC_SYNC_LOST);
 183	}
 184}
 185
 186static void tilcdc_crtc_disable_irqs(struct drm_device *dev)
 187{
 188	struct tilcdc_drm_private *priv = dev->dev_private;
 189
 190	/* disable irqs that we might have enabled: */
 191	if (priv->rev == 1) {
 192		tilcdc_clear(dev, LCDC_RASTER_CTRL_REG,
 193			LCDC_V1_SYNC_LOST_INT_ENA | LCDC_V1_FRAME_DONE_INT_ENA |
 194			LCDC_V1_UNDERFLOW_INT_ENA | LCDC_V1_PL_INT_ENA);
 195		tilcdc_clear(dev, LCDC_DMA_CTRL_REG,
 196			LCDC_V1_END_OF_FRAME_INT_ENA);
 197	} else {
 198		tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG,
 199			LCDC_V2_UNDERFLOW_INT_ENA | LCDC_V2_PL_INT_ENA |
 200			LCDC_V2_END_OF_FRAME0_INT_ENA |
 201			LCDC_FRAME_DONE | LCDC_SYNC_LOST);
 202	}
 203}
 204
 205static void reset(struct drm_crtc *crtc)
 206{
 207	struct drm_device *dev = crtc->dev;
 208	struct tilcdc_drm_private *priv = dev->dev_private;
 209
 210	if (priv->rev != 2)
 211		return;
 212
 213	tilcdc_set(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET);
 214	usleep_range(250, 1000);
 215	tilcdc_clear(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET);
 216}
 217
 218/*
 219 * Calculate the percentage difference between the requested pixel clock rate
 220 * and the effective rate resulting from calculating the clock divider value.
 221 */
 222static unsigned int tilcdc_pclk_diff(unsigned long rate,
 223				     unsigned long real_rate)
 224{
 225	int r = rate / 100, rr = real_rate / 100;
 226
 227	return (unsigned int)(abs(((rr - r) * 100) / r));
 228}
 229
 230static void tilcdc_crtc_set_clk(struct drm_crtc *crtc)
 231{
 232	struct drm_device *dev = crtc->dev;
 233	struct tilcdc_drm_private *priv = dev->dev_private;
 234	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
 235	unsigned long clk_rate, real_rate, req_rate;
 236	unsigned int clkdiv;
 237	int ret;
 238
 239	clkdiv = 2; /* first try using a standard divider of 2 */
 240
 241	/* mode.clock is in KHz, set_rate wants parameter in Hz */
 242	req_rate = crtc->mode.clock * 1000;
 243
 244	ret = clk_set_rate(priv->clk, req_rate * clkdiv);
 245	clk_rate = clk_get_rate(priv->clk);
 246	if (ret < 0) {
 
 247		/*
 248		 * If we fail to set the clock rate (some architectures don't
 249		 * use the common clock framework yet and may not implement
 250		 * all the clk API calls for every clock), try the next best
 251		 * thing: adjusting the clock divider, unless clk_get_rate()
 252		 * failed as well.
 253		 */
 254		if (!clk_rate) {
 255			/* Nothing more we can do. Just bail out. */
 256			dev_err(dev->dev,
 257				"failed to set the pixel clock - unable to read current lcdc clock rate\n");
 258			return;
 259		}
 260
 261		clkdiv = DIV_ROUND_CLOSEST(clk_rate, req_rate);
 262
 263		/*
 264		 * Emit a warning if the real clock rate resulting from the
 265		 * calculated divider differs much from the requested rate.
 266		 *
 267		 * 5% is an arbitrary value - LCDs are usually quite tolerant
 268		 * about pixel clock rates.
 269		 */
 270		real_rate = clkdiv * req_rate;
 271
 272		if (tilcdc_pclk_diff(clk_rate, real_rate) > 5) {
 273			dev_warn(dev->dev,
 274				 "effective pixel clock rate (%luHz) differs from the calculated rate (%luHz)\n",
 275				 clk_rate, real_rate);
 276		}
 277	}
 278
 279	tilcdc_crtc->lcd_fck_rate = clk_rate;
 280
 281	DBG("lcd_clk=%u, mode clock=%d, div=%u",
 282	    tilcdc_crtc->lcd_fck_rate, crtc->mode.clock, clkdiv);
 283
 284	/* Configure the LCD clock divisor. */
 285	tilcdc_write(dev, LCDC_CTRL_REG, LCDC_CLK_DIVISOR(clkdiv) |
 286		     LCDC_RASTER_MODE);
 287
 288	if (priv->rev == 2)
 289		tilcdc_set(dev, LCDC_CLK_ENABLE_REG,
 290				LCDC_V2_DMA_CLK_EN | LCDC_V2_LIDD_CLK_EN |
 291				LCDC_V2_CORE_CLK_EN);
 292}
 293
 
 
 
 
 
 
 294static void tilcdc_crtc_set_mode(struct drm_crtc *crtc)
 295{
 296	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
 297	struct drm_device *dev = crtc->dev;
 298	struct tilcdc_drm_private *priv = dev->dev_private;
 299	const struct tilcdc_panel_info *info = tilcdc_crtc->info;
 300	uint32_t reg, hbp, hfp, hsw, vbp, vfp, vsw;
 301	struct drm_display_mode *mode = &crtc->state->adjusted_mode;
 302	struct drm_framebuffer *fb = crtc->primary->state->fb;
 303
 304	if (WARN_ON(!info))
 305		return;
 306
 307	if (WARN_ON(!fb))
 308		return;
 309
 310	/* Configure the Burst Size and fifo threshold of DMA: */
 311	reg = tilcdc_read(dev, LCDC_DMA_CTRL_REG) & ~0x00000770;
 312	switch (info->dma_burst_sz) {
 313	case 1:
 314		reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_1);
 315		break;
 316	case 2:
 317		reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_2);
 318		break;
 319	case 4:
 320		reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_4);
 321		break;
 322	case 8:
 323		reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_8);
 324		break;
 325	case 16:
 326		reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_16);
 327		break;
 328	default:
 329		dev_err(dev->dev, "invalid burst size\n");
 330		return;
 331	}
 332	reg |= (info->fifo_th << 8);
 333	tilcdc_write(dev, LCDC_DMA_CTRL_REG, reg);
 334
 335	/* Configure timings: */
 336	hbp = mode->htotal - mode->hsync_end;
 337	hfp = mode->hsync_start - mode->hdisplay;
 338	hsw = mode->hsync_end - mode->hsync_start;
 339	vbp = mode->vtotal - mode->vsync_end;
 340	vfp = mode->vsync_start - mode->vdisplay;
 341	vsw = mode->vsync_end - mode->vsync_start;
 342
 343	DBG("%dx%d, hbp=%u, hfp=%u, hsw=%u, vbp=%u, vfp=%u, vsw=%u",
 344	    mode->hdisplay, mode->vdisplay, hbp, hfp, hsw, vbp, vfp, vsw);
 345
 346	/* Set AC Bias Period and Number of Transitions per Interrupt: */
 347	reg = tilcdc_read(dev, LCDC_RASTER_TIMING_2_REG) & ~0x000fff00;
 348	reg |= LCDC_AC_BIAS_FREQUENCY(info->ac_bias) |
 349		LCDC_AC_BIAS_TRANSITIONS_PER_INT(info->ac_bias_intrpt);
 350
 351	/*
 352	 * subtract one from hfp, hbp, hsw because the hardware uses
 353	 * a value of 0 as 1
 354	 */
 355	if (priv->rev == 2) {
 356		/* clear bits we're going to set */
 357		reg &= ~0x78000033;
 358		reg |= ((hfp-1) & 0x300) >> 8;
 359		reg |= ((hbp-1) & 0x300) >> 4;
 360		reg |= ((hsw-1) & 0x3c0) << 21;
 361	}
 362	tilcdc_write(dev, LCDC_RASTER_TIMING_2_REG, reg);
 363
 364	reg = (((mode->hdisplay >> 4) - 1) << 4) |
 365		(((hbp-1) & 0xff) << 24) |
 366		(((hfp-1) & 0xff) << 16) |
 367		(((hsw-1) & 0x3f) << 10);
 368	if (priv->rev == 2)
 369		reg |= (((mode->hdisplay >> 4) - 1) & 0x40) >> 3;
 370	tilcdc_write(dev, LCDC_RASTER_TIMING_0_REG, reg);
 371
 372	reg = ((mode->vdisplay - 1) & 0x3ff) |
 373		((vbp & 0xff) << 24) |
 374		((vfp & 0xff) << 16) |
 375		(((vsw-1) & 0x3f) << 10);
 376	tilcdc_write(dev, LCDC_RASTER_TIMING_1_REG, reg);
 377
 378	/*
 379	 * be sure to set Bit 10 for the V2 LCDC controller,
 380	 * otherwise limited to 1024 pixels width, stopping
 381	 * 1920x1080 being supported.
 382	 */
 383	if (priv->rev == 2) {
 384		if ((mode->vdisplay - 1) & 0x400) {
 385			tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG,
 386				LCDC_LPP_B10);
 387		} else {
 388			tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG,
 389				LCDC_LPP_B10);
 390		}
 391	}
 392
 393	/* Configure display type: */
 394	reg = tilcdc_read(dev, LCDC_RASTER_CTRL_REG) &
 395		~(LCDC_TFT_MODE | LCDC_MONO_8BIT_MODE | LCDC_MONOCHROME_MODE |
 396		  LCDC_V2_TFT_24BPP_MODE | LCDC_V2_TFT_24BPP_UNPACK |
 397		  0x000ff000 /* Palette Loading Delay bits */);
 398	reg |= LCDC_TFT_MODE; /* no monochrome/passive support */
 399	if (info->tft_alt_mode)
 400		reg |= LCDC_TFT_ALT_ENABLE;
 401	if (priv->rev == 2) {
 402		switch (fb->pixel_format) {
 403		case DRM_FORMAT_BGR565:
 404		case DRM_FORMAT_RGB565:
 405			break;
 406		case DRM_FORMAT_XBGR8888:
 407		case DRM_FORMAT_XRGB8888:
 408			reg |= LCDC_V2_TFT_24BPP_UNPACK;
 409			/* fallthrough */
 410		case DRM_FORMAT_BGR888:
 411		case DRM_FORMAT_RGB888:
 412			reg |= LCDC_V2_TFT_24BPP_MODE;
 413			break;
 414		default:
 415			dev_err(dev->dev, "invalid pixel format\n");
 416			return;
 417		}
 418	}
 419	reg |= info->fdd < 12;
 420	tilcdc_write(dev, LCDC_RASTER_CTRL_REG, reg);
 421
 422	if (info->invert_pxl_clk)
 423		tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK);
 424	else
 425		tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK);
 426
 427	if (info->sync_ctrl)
 428		tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL);
 429	else
 430		tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL);
 431
 432	if (info->sync_edge)
 433		tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE);
 434	else
 435		tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE);
 436
 437	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
 438		tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_HSYNC);
 439	else
 440		tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_HSYNC);
 441
 442	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
 443		tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_VSYNC);
 444	else
 445		tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_VSYNC);
 446
 447	if (info->raster_order)
 448		tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER);
 449	else
 450		tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER);
 451
 452	tilcdc_crtc_set_clk(crtc);
 453
 454	tilcdc_crtc_load_palette(crtc);
 455
 456	set_scanout(crtc, fb);
 457
 458	drm_framebuffer_reference(fb);
 459
 460	crtc->hwmode = crtc->state->adjusted_mode;
 
 461}
 462
 463static void tilcdc_crtc_enable(struct drm_crtc *crtc)
 464{
 465	struct drm_device *dev = crtc->dev;
 466	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
 
 467
 468	WARN_ON(!drm_modeset_is_locked(&crtc->mutex));
 469	mutex_lock(&tilcdc_crtc->enable_lock);
 470	if (tilcdc_crtc->enabled || tilcdc_crtc->shutdown) {
 471		mutex_unlock(&tilcdc_crtc->enable_lock);
 472		return;
 473	}
 474
 475	pm_runtime_get_sync(dev->dev);
 476
 477	reset(crtc);
 478
 479	tilcdc_crtc_set_mode(crtc);
 480
 481	tilcdc_crtc_enable_irqs(dev);
 482
 483	tilcdc_clear(dev, LCDC_DMA_CTRL_REG, LCDC_DUAL_FRAME_BUFFER_ENABLE);
 484	tilcdc_write_mask(dev, LCDC_RASTER_CTRL_REG,
 485			  LCDC_PALETTE_LOAD_MODE(DATA_ONLY),
 486			  LCDC_PALETTE_LOAD_MODE_MASK);
 
 
 
 
 
 
 
 
 
 487	tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
 
 488
 489	drm_crtc_vblank_on(crtc);
 490
 491	tilcdc_crtc->enabled = true;
 492	mutex_unlock(&tilcdc_crtc->enable_lock);
 493}
 494
 
 
 
 
 
 
 495static void tilcdc_crtc_off(struct drm_crtc *crtc, bool shutdown)
 496{
 497	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
 498	struct drm_device *dev = crtc->dev;
 499	struct tilcdc_drm_private *priv = dev->dev_private;
 500	int ret;
 501
 502	mutex_lock(&tilcdc_crtc->enable_lock);
 503	if (shutdown)
 504		tilcdc_crtc->shutdown = true;
 505	if (!tilcdc_crtc->enabled) {
 506		mutex_unlock(&tilcdc_crtc->enable_lock);
 507		return;
 508	}
 509	tilcdc_crtc->frame_done = false;
 510	tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
 511
 512	/*
 513	 * Wait for framedone irq which will still come before putting
 514	 * things to sleep..
 515	 */
 516	ret = wait_event_timeout(tilcdc_crtc->frame_done_wq,
 517				 tilcdc_crtc->frame_done,
 518				 msecs_to_jiffies(500));
 519	if (ret == 0)
 520		dev_err(dev->dev, "%s: timeout waiting for framedone\n",
 521			__func__);
 522
 523	drm_crtc_vblank_off(crtc);
 524
 525	tilcdc_crtc_disable_irqs(dev);
 526
 527	pm_runtime_put_sync(dev->dev);
 528
 529	if (tilcdc_crtc->next_fb) {
 530		drm_flip_work_queue(&tilcdc_crtc->unref_work,
 531				    tilcdc_crtc->next_fb);
 532		tilcdc_crtc->next_fb = NULL;
 533	}
 534
 535	if (tilcdc_crtc->curr_fb) {
 536		drm_flip_work_queue(&tilcdc_crtc->unref_work,
 537				    tilcdc_crtc->curr_fb);
 538		tilcdc_crtc->curr_fb = NULL;
 539	}
 540
 541	drm_flip_work_commit(&tilcdc_crtc->unref_work, priv->wq);
 542	tilcdc_crtc->last_vblank = 0;
 
 543
 544	tilcdc_crtc->enabled = false;
 545	mutex_unlock(&tilcdc_crtc->enable_lock);
 546}
 547
 548static void tilcdc_crtc_disable(struct drm_crtc *crtc)
 549{
 550	WARN_ON(!drm_modeset_is_locked(&crtc->mutex));
 551	tilcdc_crtc_off(crtc, false);
 552}
 553
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 554void tilcdc_crtc_shutdown(struct drm_crtc *crtc)
 555{
 556	tilcdc_crtc_off(crtc, true);
 557}
 558
 559static bool tilcdc_crtc_is_on(struct drm_crtc *crtc)
 560{
 561	return crtc->state && crtc->state->enable && crtc->state->active;
 562}
 563
 564static void tilcdc_crtc_recover_work(struct work_struct *work)
 565{
 566	struct tilcdc_crtc *tilcdc_crtc =
 567		container_of(work, struct tilcdc_crtc, recover_work);
 568	struct drm_crtc *crtc = &tilcdc_crtc->base;
 569
 570	dev_info(crtc->dev->dev, "%s: Reset CRTC", __func__);
 571
 572	drm_modeset_lock_crtc(crtc, NULL);
 573
 574	if (!tilcdc_crtc_is_on(crtc))
 575		goto out;
 576
 577	tilcdc_crtc_disable(crtc);
 578	tilcdc_crtc_enable(crtc);
 579out:
 580	drm_modeset_unlock_crtc(crtc);
 581}
 582
 583static void tilcdc_crtc_destroy(struct drm_crtc *crtc)
 584{
 585	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
 586	struct tilcdc_drm_private *priv = crtc->dev->dev_private;
 587
 588	drm_modeset_lock_crtc(crtc, NULL);
 589	tilcdc_crtc_disable(crtc);
 590	drm_modeset_unlock_crtc(crtc);
 591
 592	flush_workqueue(priv->wq);
 593
 594	of_node_put(crtc->port);
 595	drm_crtc_cleanup(crtc);
 596	drm_flip_work_cleanup(&tilcdc_crtc->unref_work);
 597}
 598
 599int tilcdc_crtc_update_fb(struct drm_crtc *crtc,
 600		struct drm_framebuffer *fb,
 601		struct drm_pending_vblank_event *event)
 602{
 603	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
 604	struct drm_device *dev = crtc->dev;
 605	unsigned long flags;
 606
 607	WARN_ON(!drm_modeset_is_locked(&crtc->mutex));
 608
 609	if (tilcdc_crtc->event) {
 610		dev_err(dev->dev, "already pending page flip!\n");
 611		return -EBUSY;
 612	}
 613
 614	drm_framebuffer_reference(fb);
 615
 616	crtc->primary->fb = fb;
 617
 618	spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags);
 619
 620	if (crtc->hwmode.vrefresh && ktime_to_ns(tilcdc_crtc->last_vblank)) {
 621		ktime_t next_vblank;
 622		s64 tdiff;
 623
 
 
 624		next_vblank = ktime_add_us(tilcdc_crtc->last_vblank,
 625			1000000 / crtc->hwmode.vrefresh);
 626
 627		tdiff = ktime_to_us(ktime_sub(next_vblank, ktime_get()));
 628
 629		if (tdiff < TILCDC_VBLANK_SAFETY_THRESHOLD_US)
 630			tilcdc_crtc->next_fb = fb;
 
 
 
 
 631	}
 632
 633	if (tilcdc_crtc->next_fb != fb)
 634		set_scanout(crtc, fb);
 635
 636	tilcdc_crtc->event = event;
 637
 638	spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags);
 639
 640	return 0;
 641}
 642
 643static bool tilcdc_crtc_mode_fixup(struct drm_crtc *crtc,
 644		const struct drm_display_mode *mode,
 645		struct drm_display_mode *adjusted_mode)
 646{
 647	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
 648
 649	if (!tilcdc_crtc->simulate_vesa_sync)
 650		return true;
 651
 652	/*
 653	 * tilcdc does not generate VESA-compliant sync but aligns
 654	 * VS on the second edge of HS instead of first edge.
 655	 * We use adjusted_mode, to fixup sync by aligning both rising
 656	 * edges and add HSKEW offset to fix the sync.
 657	 */
 658	adjusted_mode->hskew = mode->hsync_end - mode->hsync_start;
 659	adjusted_mode->flags |= DRM_MODE_FLAG_HSKEW;
 660
 661	if (mode->flags & DRM_MODE_FLAG_NHSYNC) {
 662		adjusted_mode->flags |= DRM_MODE_FLAG_PHSYNC;
 663		adjusted_mode->flags &= ~DRM_MODE_FLAG_NHSYNC;
 664	} else {
 665		adjusted_mode->flags |= DRM_MODE_FLAG_NHSYNC;
 666		adjusted_mode->flags &= ~DRM_MODE_FLAG_PHSYNC;
 667	}
 668
 669	return true;
 670}
 671
 672static int tilcdc_crtc_atomic_check(struct drm_crtc *crtc,
 673				    struct drm_crtc_state *state)
 674{
 675	struct drm_display_mode *mode = &state->mode;
 676	int ret;
 677
 678	/* If we are not active we don't care */
 679	if (!state->active)
 680		return 0;
 681
 682	if (state->state->planes[0].ptr != crtc->primary ||
 683	    state->state->planes[0].state == NULL ||
 684	    state->state->planes[0].state->crtc != crtc) {
 685		dev_dbg(crtc->dev->dev, "CRTC primary plane must be present");
 686		return -EINVAL;
 687	}
 688
 689	ret = tilcdc_crtc_mode_valid(crtc, mode);
 690	if (ret) {
 691		dev_dbg(crtc->dev->dev, "Mode \"%s\" not valid", mode->name);
 692		return -EINVAL;
 693	}
 694
 695	return 0;
 696}
 697
 698static const struct drm_crtc_funcs tilcdc_crtc_funcs = {
 699	.destroy        = tilcdc_crtc_destroy,
 700	.set_config     = drm_atomic_helper_set_config,
 701	.page_flip      = drm_atomic_helper_page_flip,
 702	.reset		= drm_atomic_helper_crtc_reset,
 703	.atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
 704	.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
 705};
 
 
 
 
 
 
 
 
 
 
 
 706
 707static const struct drm_crtc_helper_funcs tilcdc_crtc_helper_funcs = {
 708		.mode_fixup     = tilcdc_crtc_mode_fixup,
 709		.enable		= tilcdc_crtc_enable,
 710		.disable	= tilcdc_crtc_disable,
 711		.atomic_check	= tilcdc_crtc_atomic_check,
 712};
 713
 714int tilcdc_crtc_max_width(struct drm_crtc *crtc)
 715{
 
 716	struct drm_device *dev = crtc->dev;
 717	struct tilcdc_drm_private *priv = dev->dev_private;
 718	int max_width = 0;
 
 
 719
 720	if (priv->rev == 1)
 721		max_width = 1024;
 722	else if (priv->rev == 2)
 723		max_width = 2048;
 
 
 724
 725	return max_width;
 726}
 727
 728int tilcdc_crtc_mode_valid(struct drm_crtc *crtc, struct drm_display_mode *mode)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 729{
 730	struct tilcdc_drm_private *priv = crtc->dev->dev_private;
 731	unsigned int bandwidth;
 732	uint32_t hbp, hfp, hsw, vbp, vfp, vsw;
 733
 734	/*
 735	 * check to see if the width is within the range that
 736	 * the LCD Controller physically supports
 737	 */
 738	if (mode->hdisplay > tilcdc_crtc_max_width(crtc))
 739		return MODE_VIRTUAL_X;
 740
 741	/* width must be multiple of 16 */
 742	if (mode->hdisplay & 0xf)
 743		return MODE_VIRTUAL_X;
 744
 745	if (mode->vdisplay > 2048)
 746		return MODE_VIRTUAL_Y;
 747
 748	DBG("Processing mode %dx%d@%d with pixel clock %d",
 749		mode->hdisplay, mode->vdisplay,
 750		drm_mode_vrefresh(mode), mode->clock);
 751
 752	hbp = mode->htotal - mode->hsync_end;
 753	hfp = mode->hsync_start - mode->hdisplay;
 754	hsw = mode->hsync_end - mode->hsync_start;
 755	vbp = mode->vtotal - mode->vsync_end;
 756	vfp = mode->vsync_start - mode->vdisplay;
 757	vsw = mode->vsync_end - mode->vsync_start;
 758
 759	if ((hbp-1) & ~0x3ff) {
 760		DBG("Pruning mode: Horizontal Back Porch out of range");
 761		return MODE_HBLANK_WIDE;
 762	}
 763
 764	if ((hfp-1) & ~0x3ff) {
 765		DBG("Pruning mode: Horizontal Front Porch out of range");
 766		return MODE_HBLANK_WIDE;
 767	}
 768
 769	if ((hsw-1) & ~0x3ff) {
 770		DBG("Pruning mode: Horizontal Sync Width out of range");
 771		return MODE_HSYNC_WIDE;
 772	}
 773
 774	if (vbp & ~0xff) {
 775		DBG("Pruning mode: Vertical Back Porch out of range");
 776		return MODE_VBLANK_WIDE;
 777	}
 778
 779	if (vfp & ~0xff) {
 780		DBG("Pruning mode: Vertical Front Porch out of range");
 781		return MODE_VBLANK_WIDE;
 782	}
 783
 784	if ((vsw-1) & ~0x3f) {
 785		DBG("Pruning mode: Vertical Sync Width out of range");
 786		return MODE_VSYNC_WIDE;
 787	}
 788
 789	/*
 790	 * some devices have a maximum allowed pixel clock
 791	 * configured from the DT
 792	 */
 793	if (mode->clock > priv->max_pixelclock) {
 794		DBG("Pruning mode: pixel clock too high");
 795		return MODE_CLOCK_HIGH;
 796	}
 797
 798	/*
 799	 * some devices further limit the max horizontal resolution
 800	 * configured from the DT
 801	 */
 802	if (mode->hdisplay > priv->max_width)
 803		return MODE_BAD_WIDTH;
 804
 805	/* filter out modes that would require too much memory bandwidth: */
 806	bandwidth = mode->hdisplay * mode->vdisplay *
 807		drm_mode_vrefresh(mode);
 808	if (bandwidth > priv->max_bandwidth) {
 809		DBG("Pruning mode: exceeds defined bandwidth limit");
 810		return MODE_BAD;
 811	}
 812
 813	return MODE_OK;
 814}
 815
 
 
 
 
 
 
 
 
 
 816void tilcdc_crtc_set_panel_info(struct drm_crtc *crtc,
 817		const struct tilcdc_panel_info *info)
 818{
 819	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
 820	tilcdc_crtc->info = info;
 821}
 822
 823void tilcdc_crtc_set_simulate_vesa_sync(struct drm_crtc *crtc,
 824					bool simulate_vesa_sync)
 825{
 826	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
 827
 828	tilcdc_crtc->simulate_vesa_sync = simulate_vesa_sync;
 829}
 830
 831void tilcdc_crtc_update_clk(struct drm_crtc *crtc)
 832{
 833	struct drm_device *dev = crtc->dev;
 834	struct tilcdc_drm_private *priv = dev->dev_private;
 835	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
 836
 837	drm_modeset_lock_crtc(crtc, NULL);
 838	if (tilcdc_crtc->lcd_fck_rate != clk_get_rate(priv->clk)) {
 839		if (tilcdc_crtc_is_on(crtc)) {
 840			pm_runtime_get_sync(dev->dev);
 841			tilcdc_crtc_disable(crtc);
 842
 843			tilcdc_crtc_set_clk(crtc);
 844
 845			tilcdc_crtc_enable(crtc);
 846			pm_runtime_put_sync(dev->dev);
 847		}
 848	}
 849	drm_modeset_unlock_crtc(crtc);
 850}
 851
 852#define SYNC_LOST_COUNT_LIMIT 50
 853
 854irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc)
 855{
 856	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
 857	struct drm_device *dev = crtc->dev;
 858	struct tilcdc_drm_private *priv = dev->dev_private;
 859	uint32_t stat, reg;
 860
 861	stat = tilcdc_read_irqstatus(dev);
 862	tilcdc_clear_irqstatus(dev, stat);
 863
 864	if (stat & LCDC_END_OF_FRAME0) {
 865		unsigned long flags;
 866		bool skip_event = false;
 867		ktime_t now;
 868
 869		now = ktime_get();
 870
 871		drm_flip_work_commit(&tilcdc_crtc->unref_work, priv->wq);
 872
 873		spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags);
 874
 875		tilcdc_crtc->last_vblank = now;
 876
 877		if (tilcdc_crtc->next_fb) {
 878			set_scanout(crtc, tilcdc_crtc->next_fb);
 879			tilcdc_crtc->next_fb = NULL;
 880			skip_event = true;
 881		}
 882
 883		spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags);
 884
 885		drm_crtc_handle_vblank(crtc);
 886
 887		if (!skip_event) {
 888			struct drm_pending_vblank_event *event;
 889
 890			spin_lock_irqsave(&dev->event_lock, flags);
 891
 892			event = tilcdc_crtc->event;
 893			tilcdc_crtc->event = NULL;
 894			if (event)
 895				drm_crtc_send_vblank_event(crtc, event);
 896
 897			spin_unlock_irqrestore(&dev->event_lock, flags);
 898		}
 899
 900		if (tilcdc_crtc->frame_intact)
 901			tilcdc_crtc->sync_lost_count = 0;
 902		else
 903			tilcdc_crtc->frame_intact = true;
 904	}
 905
 906	if (stat & LCDC_FIFO_UNDERFLOW)
 907		dev_err_ratelimited(dev->dev, "%s(0x%08x): FIFO underflow",
 908				    __func__, stat);
 909
 910	if (stat & LCDC_PL_LOAD_DONE) {
 911		complete(&tilcdc_crtc->palette_loaded);
 912		if (priv->rev == 1)
 913			tilcdc_clear(dev, LCDC_RASTER_CTRL_REG,
 914				     LCDC_V1_PL_INT_ENA);
 915		else
 916			tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG,
 917				     LCDC_V2_PL_INT_ENA);
 918	}
 919
 920	if (stat & LCDC_SYNC_LOST) {
 921		dev_err_ratelimited(dev->dev, "%s(0x%08x): Sync lost",
 922				    __func__, stat);
 923		tilcdc_crtc->frame_intact = false;
 924		if (priv->rev == 1) {
 925			reg = tilcdc_read(dev, LCDC_RASTER_CTRL_REG);
 926			if (reg & LCDC_RASTER_ENABLE) {
 927				tilcdc_clear(dev, LCDC_RASTER_CTRL_REG,
 928					     LCDC_RASTER_ENABLE);
 929				tilcdc_set(dev, LCDC_RASTER_CTRL_REG,
 930					   LCDC_RASTER_ENABLE);
 931			}
 932		} else {
 933			if (tilcdc_crtc->sync_lost_count++ >
 934			    SYNC_LOST_COUNT_LIMIT) {
 935				dev_err(dev->dev,
 936					"%s(0x%08x): Sync lost flood detected, recovering",
 937					__func__, stat);
 938				queue_work(system_wq,
 939					   &tilcdc_crtc->recover_work);
 940				tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG,
 941					     LCDC_SYNC_LOST);
 942				tilcdc_crtc->sync_lost_count = 0;
 943			}
 944		}
 945	}
 946
 947	if (stat & LCDC_FRAME_DONE) {
 948		tilcdc_crtc->frame_done = true;
 949		wake_up(&tilcdc_crtc->frame_done_wq);
 950		/* rev 1 lcdc appears to hang if irq is not disbaled here */
 951		if (priv->rev == 1)
 952			tilcdc_clear(dev, LCDC_RASTER_CTRL_REG,
 953				     LCDC_V1_FRAME_DONE_INT_ENA);
 954	}
 955
 956	/* For revision 2 only */
 957	if (priv->rev == 2) {
 958		/* Indicate to LCDC that the interrupt service routine has
 959		 * completed, see 13.3.6.1.6 in AM335x TRM.
 960		 */
 961		tilcdc_write(dev, LCDC_END_OF_INT_IND_REG, 0);
 962	}
 963
 964	return IRQ_HANDLED;
 965}
 966
 967int tilcdc_crtc_create(struct drm_device *dev)
 968{
 969	struct tilcdc_drm_private *priv = dev->dev_private;
 970	struct tilcdc_crtc *tilcdc_crtc;
 971	struct drm_crtc *crtc;
 972	int ret;
 973
 974	tilcdc_crtc = devm_kzalloc(dev->dev, sizeof(*tilcdc_crtc), GFP_KERNEL);
 975	if (!tilcdc_crtc) {
 976		dev_err(dev->dev, "allocation failed\n");
 977		return -ENOMEM;
 978	}
 979
 980	init_completion(&tilcdc_crtc->palette_loaded);
 981	tilcdc_crtc->palette_base = dmam_alloc_coherent(dev->dev,
 982					TILCDC_PALETTE_SIZE,
 983					&tilcdc_crtc->palette_dma_handle,
 984					GFP_KERNEL | __GFP_ZERO);
 985	if (!tilcdc_crtc->palette_base)
 986		return -ENOMEM;
 987	*tilcdc_crtc->palette_base = TILCDC_PALETTE_FIRST_ENTRY;
 988
 989	crtc = &tilcdc_crtc->base;
 990
 991	ret = tilcdc_plane_init(dev, &tilcdc_crtc->primary);
 992	if (ret < 0)
 993		goto fail;
 994
 995	mutex_init(&tilcdc_crtc->enable_lock);
 996
 997	init_waitqueue_head(&tilcdc_crtc->frame_done_wq);
 998
 999	drm_flip_work_init(&tilcdc_crtc->unref_work,
1000			"unref", unref_worker);
1001
1002	spin_lock_init(&tilcdc_crtc->irq_lock);
1003	INIT_WORK(&tilcdc_crtc->recover_work, tilcdc_crtc_recover_work);
1004
1005	ret = drm_crtc_init_with_planes(dev, crtc,
1006					&tilcdc_crtc->primary,
1007					NULL,
1008					&tilcdc_crtc_funcs,
1009					"tilcdc crtc");
1010	if (ret < 0)
1011		goto fail;
1012
1013	drm_crtc_helper_add(crtc, &tilcdc_crtc_helper_funcs);
1014
1015	if (priv->is_componentized) {
1016		struct device_node *ports =
1017			of_get_child_by_name(dev->dev->of_node, "ports");
1018
1019		if (ports) {
1020			crtc->port = of_get_child_by_name(ports, "port");
1021			of_node_put(ports);
1022		} else {
1023			crtc->port =
1024				of_get_child_by_name(dev->dev->of_node, "port");
1025		}
1026		if (!crtc->port) { /* This should never happen */
1027			dev_err(dev->dev, "Port node not found in %s\n",
1028				dev->dev->of_node->full_name);
1029			ret = -EINVAL;
1030			goto fail;
1031		}
1032	}
1033
1034	priv->crtc = crtc;
1035	return 0;
1036
1037fail:
1038	tilcdc_crtc_destroy(crtc);
1039	return -ENOMEM;
1040}