Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/* Siemens ID Mouse driver v0.6
3
4 Copyright (C) 2004-5 by Florian 'Floe' Echtler <echtler@fs.tum.de>
5 and Andreas 'ad' Deresch <aderesch@fs.tum.de>
6
7 Derived from the USB Skeleton driver 1.1,
8 Copyright (C) 2003 Greg Kroah-Hartman (greg@kroah.com)
9
10 Additional information provided by Martin Reising
11 <Martin.Reising@natural-computing.de>
12
13*/
14
15#include <linux/kernel.h>
16#include <linux/sched/signal.h>
17#include <linux/errno.h>
18#include <linux/delay.h>
19#include <linux/slab.h>
20#include <linux/module.h>
21#include <linux/completion.h>
22#include <linux/mutex.h>
23#include <linux/uaccess.h>
24#include <linux/usb.h>
25
26/* image constants */
27#define WIDTH 225
28#define HEIGHT 289
29#define HEADER "P5 225 289 255 "
30#define IMGSIZE ((WIDTH * HEIGHT) + sizeof(HEADER)-1)
31
32#define DRIVER_SHORT "idmouse"
33#define DRIVER_AUTHOR "Florian 'Floe' Echtler <echtler@fs.tum.de>"
34#define DRIVER_DESC "Siemens ID Mouse FingerTIP Sensor Driver"
35
36/* minor number for misc USB devices */
37#define USB_IDMOUSE_MINOR_BASE 132
38
39/* vendor and device IDs */
40#define ID_SIEMENS 0x0681
41#define ID_IDMOUSE 0x0005
42#define ID_CHERRY 0x0010
43
44/* device ID table */
45static const struct usb_device_id idmouse_table[] = {
46 {USB_DEVICE(ID_SIEMENS, ID_IDMOUSE)}, /* Siemens ID Mouse (Professional) */
47 {USB_DEVICE(ID_SIEMENS, ID_CHERRY )}, /* Cherry FingerTIP ID Board */
48 {} /* terminating null entry */
49};
50
51/* sensor commands */
52#define FTIP_RESET 0x20
53#define FTIP_ACQUIRE 0x21
54#define FTIP_RELEASE 0x22
55#define FTIP_BLINK 0x23 /* LSB of value = blink pulse width */
56#define FTIP_SCROLL 0x24
57
58#define ftip_command(dev, command, value, index) \
59 usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), command, \
60 USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, value, index, NULL, 0, 1000)
61
62MODULE_DEVICE_TABLE(usb, idmouse_table);
63
64/* structure to hold all of our device specific stuff */
65struct usb_idmouse {
66
67 struct usb_device *udev; /* save off the usb device pointer */
68 struct usb_interface *interface; /* the interface for this device */
69
70 unsigned char *bulk_in_buffer; /* the buffer to receive data */
71 size_t bulk_in_size; /* the maximum bulk packet size */
72 size_t orig_bi_size; /* same as above, but reported by the device */
73 __u8 bulk_in_endpointAddr; /* the address of the bulk in endpoint */
74
75 int open; /* if the port is open or not */
76 int present; /* if the device is not disconnected */
77 struct mutex lock; /* locks this structure */
78
79};
80
81/* local function prototypes */
82static ssize_t idmouse_read(struct file *file, char __user *buffer,
83 size_t count, loff_t * ppos);
84
85static int idmouse_open(struct inode *inode, struct file *file);
86static int idmouse_release(struct inode *inode, struct file *file);
87
88static int idmouse_probe(struct usb_interface *interface,
89 const struct usb_device_id *id);
90
91static void idmouse_disconnect(struct usb_interface *interface);
92static int idmouse_suspend(struct usb_interface *intf, pm_message_t message);
93static int idmouse_resume(struct usb_interface *intf);
94
95/* file operation pointers */
96static const struct file_operations idmouse_fops = {
97 .owner = THIS_MODULE,
98 .read = idmouse_read,
99 .open = idmouse_open,
100 .release = idmouse_release,
101 .llseek = default_llseek,
102};
103
104/* class driver information */
105static struct usb_class_driver idmouse_class = {
106 .name = "idmouse%d",
107 .fops = &idmouse_fops,
108 .minor_base = USB_IDMOUSE_MINOR_BASE,
109};
110
111/* usb specific object needed to register this driver with the usb subsystem */
112static struct usb_driver idmouse_driver = {
113 .name = DRIVER_SHORT,
114 .probe = idmouse_probe,
115 .disconnect = idmouse_disconnect,
116 .suspend = idmouse_suspend,
117 .resume = idmouse_resume,
118 .reset_resume = idmouse_resume,
119 .id_table = idmouse_table,
120 .supports_autosuspend = 1,
121};
122
123static int idmouse_create_image(struct usb_idmouse *dev)
124{
125 int bytes_read;
126 int bulk_read;
127 int result;
128
129 memcpy(dev->bulk_in_buffer, HEADER, sizeof(HEADER)-1);
130 bytes_read = sizeof(HEADER)-1;
131
132 /* reset the device and set a fast blink rate */
133 result = ftip_command(dev, FTIP_RELEASE, 0, 0);
134 if (result < 0)
135 goto reset;
136 result = ftip_command(dev, FTIP_BLINK, 1, 0);
137 if (result < 0)
138 goto reset;
139
140 /* initialize the sensor - sending this command twice */
141 /* significantly reduces the rate of failed reads */
142 result = ftip_command(dev, FTIP_ACQUIRE, 0, 0);
143 if (result < 0)
144 goto reset;
145 result = ftip_command(dev, FTIP_ACQUIRE, 0, 0);
146 if (result < 0)
147 goto reset;
148
149 /* start the readout - sending this command twice */
150 /* presumably enables the high dynamic range mode */
151 result = ftip_command(dev, FTIP_RESET, 0, 0);
152 if (result < 0)
153 goto reset;
154 result = ftip_command(dev, FTIP_RESET, 0, 0);
155 if (result < 0)
156 goto reset;
157
158 /* loop over a blocking bulk read to get data from the device */
159 while (bytes_read < IMGSIZE) {
160 result = usb_bulk_msg(dev->udev,
161 usb_rcvbulkpipe(dev->udev, dev->bulk_in_endpointAddr),
162 dev->bulk_in_buffer + bytes_read,
163 dev->bulk_in_size, &bulk_read, 5000);
164 if (result < 0) {
165 /* Maybe this error was caused by the increased packet size? */
166 /* Reset to the original value and tell userspace to retry. */
167 if (dev->bulk_in_size != dev->orig_bi_size) {
168 dev->bulk_in_size = dev->orig_bi_size;
169 result = -EAGAIN;
170 }
171 break;
172 }
173 if (signal_pending(current)) {
174 result = -EINTR;
175 break;
176 }
177 bytes_read += bulk_read;
178 }
179
180 /* check for valid image */
181 /* right border should be black (0x00) */
182 for (bytes_read = sizeof(HEADER)-1 + WIDTH-1; bytes_read < IMGSIZE; bytes_read += WIDTH)
183 if (dev->bulk_in_buffer[bytes_read] != 0x00)
184 return -EAGAIN;
185
186 /* lower border should be white (0xFF) */
187 for (bytes_read = IMGSIZE-WIDTH; bytes_read < IMGSIZE-1; bytes_read++)
188 if (dev->bulk_in_buffer[bytes_read] != 0xFF)
189 return -EAGAIN;
190
191 /* reset the device */
192reset:
193 ftip_command(dev, FTIP_RELEASE, 0, 0);
194
195 /* should be IMGSIZE == 65040 */
196 dev_dbg(&dev->interface->dev, "read %d bytes fingerprint data\n",
197 bytes_read);
198 return result;
199}
200
201/* PM operations are nops as this driver does IO only during open() */
202static int idmouse_suspend(struct usb_interface *intf, pm_message_t message)
203{
204 return 0;
205}
206
207static int idmouse_resume(struct usb_interface *intf)
208{
209 return 0;
210}
211
212static inline void idmouse_delete(struct usb_idmouse *dev)
213{
214 kfree(dev->bulk_in_buffer);
215 kfree(dev);
216}
217
218static int idmouse_open(struct inode *inode, struct file *file)
219{
220 struct usb_idmouse *dev;
221 struct usb_interface *interface;
222 int result;
223
224 /* get the interface from minor number and driver information */
225 interface = usb_find_interface(&idmouse_driver, iminor(inode));
226 if (!interface)
227 return -ENODEV;
228
229 /* get the device information block from the interface */
230 dev = usb_get_intfdata(interface);
231 if (!dev)
232 return -ENODEV;
233
234 /* lock this device */
235 mutex_lock(&dev->lock);
236
237 /* check if already open */
238 if (dev->open) {
239
240 /* already open, so fail */
241 result = -EBUSY;
242
243 } else {
244
245 /* create a new image and check for success */
246 result = usb_autopm_get_interface(interface);
247 if (result)
248 goto error;
249 result = idmouse_create_image(dev);
250 usb_autopm_put_interface(interface);
251 if (result)
252 goto error;
253
254 /* increment our usage count for the driver */
255 ++dev->open;
256
257 /* save our object in the file's private structure */
258 file->private_data = dev;
259
260 }
261
262error:
263
264 /* unlock this device */
265 mutex_unlock(&dev->lock);
266 return result;
267}
268
269static int idmouse_release(struct inode *inode, struct file *file)
270{
271 struct usb_idmouse *dev;
272
273 dev = file->private_data;
274
275 if (dev == NULL)
276 return -ENODEV;
277
278 /* lock our device */
279 mutex_lock(&dev->lock);
280
281 --dev->open;
282
283 if (!dev->present) {
284 /* the device was unplugged before the file was released */
285 mutex_unlock(&dev->lock);
286 idmouse_delete(dev);
287 } else {
288 mutex_unlock(&dev->lock);
289 }
290 return 0;
291}
292
293static ssize_t idmouse_read(struct file *file, char __user *buffer, size_t count,
294 loff_t * ppos)
295{
296 struct usb_idmouse *dev = file->private_data;
297 int result;
298
299 /* lock this object */
300 mutex_lock(&dev->lock);
301
302 /* verify that the device wasn't unplugged */
303 if (!dev->present) {
304 mutex_unlock(&dev->lock);
305 return -ENODEV;
306 }
307
308 result = simple_read_from_buffer(buffer, count, ppos,
309 dev->bulk_in_buffer, IMGSIZE);
310 /* unlock the device */
311 mutex_unlock(&dev->lock);
312 return result;
313}
314
315static int idmouse_probe(struct usb_interface *interface,
316 const struct usb_device_id *id)
317{
318 struct usb_device *udev = interface_to_usbdev(interface);
319 struct usb_idmouse *dev;
320 struct usb_host_interface *iface_desc;
321 struct usb_endpoint_descriptor *endpoint;
322 int result;
323
324 /* check if we have gotten the data or the hid interface */
325 iface_desc = interface->cur_altsetting;
326 if (iface_desc->desc.bInterfaceClass != 0x0A)
327 return -ENODEV;
328
329 if (iface_desc->desc.bNumEndpoints < 1)
330 return -ENODEV;
331
332 /* allocate memory for our device state and initialize it */
333 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
334 if (dev == NULL)
335 return -ENOMEM;
336
337 mutex_init(&dev->lock);
338 dev->udev = udev;
339 dev->interface = interface;
340
341 /* set up the endpoint information - use only the first bulk-in endpoint */
342 result = usb_find_bulk_in_endpoint(iface_desc, &endpoint);
343 if (result) {
344 dev_err(&interface->dev, "Unable to find bulk-in endpoint.\n");
345 idmouse_delete(dev);
346 return result;
347 }
348
349 dev->orig_bi_size = usb_endpoint_maxp(endpoint);
350 dev->bulk_in_size = 0x200; /* works _much_ faster */
351 dev->bulk_in_endpointAddr = endpoint->bEndpointAddress;
352 dev->bulk_in_buffer = kmalloc(IMGSIZE + dev->bulk_in_size, GFP_KERNEL);
353 if (!dev->bulk_in_buffer) {
354 idmouse_delete(dev);
355 return -ENOMEM;
356 }
357
358 /* allow device read, write and ioctl */
359 dev->present = 1;
360
361 /* we can register the device now, as it is ready */
362 usb_set_intfdata(interface, dev);
363 result = usb_register_dev(interface, &idmouse_class);
364 if (result) {
365 /* something prevented us from registering this device */
366 dev_err(&interface->dev, "Unable to allocate minor number.\n");
367 idmouse_delete(dev);
368 return result;
369 }
370
371 /* be noisy */
372 dev_info(&interface->dev,"%s now attached\n",DRIVER_DESC);
373
374 return 0;
375}
376
377static void idmouse_disconnect(struct usb_interface *interface)
378{
379 struct usb_idmouse *dev = usb_get_intfdata(interface);
380
381 /* give back our minor */
382 usb_deregister_dev(interface, &idmouse_class);
383
384 /* lock the device */
385 mutex_lock(&dev->lock);
386
387 /* prevent device read, write and ioctl */
388 dev->present = 0;
389
390 /* if the device is opened, idmouse_release will clean this up */
391 if (!dev->open) {
392 mutex_unlock(&dev->lock);
393 idmouse_delete(dev);
394 } else {
395 /* unlock */
396 mutex_unlock(&dev->lock);
397 }
398
399 dev_info(&interface->dev, "disconnected\n");
400}
401
402module_usb_driver(idmouse_driver);
403
404MODULE_AUTHOR(DRIVER_AUTHOR);
405MODULE_DESCRIPTION(DRIVER_DESC);
406MODULE_LICENSE("GPL");
407
1/* Siemens ID Mouse driver v0.6
2
3 This program is free software; you can redistribute it and/or
4 modify it under the terms of the GNU General Public License as
5 published by the Free Software Foundation; either version 2 of
6 the License, or (at your option) any later version.
7
8 Copyright (C) 2004-5 by Florian 'Floe' Echtler <echtler@fs.tum.de>
9 and Andreas 'ad' Deresch <aderesch@fs.tum.de>
10
11 Derived from the USB Skeleton driver 1.1,
12 Copyright (C) 2003 Greg Kroah-Hartman (greg@kroah.com)
13
14 Additional information provided by Martin Reising
15 <Martin.Reising@natural-computing.de>
16
17*/
18
19#include <linux/kernel.h>
20#include <linux/errno.h>
21#include <linux/delay.h>
22#include <linux/init.h>
23#include <linux/slab.h>
24#include <linux/module.h>
25#include <linux/completion.h>
26#include <linux/mutex.h>
27#include <asm/uaccess.h>
28#include <linux/usb.h>
29
30/* image constants */
31#define WIDTH 225
32#define HEIGHT 289
33#define HEADER "P5 225 289 255 "
34#define IMGSIZE ((WIDTH * HEIGHT) + sizeof(HEADER)-1)
35
36/* version information */
37#define DRIVER_VERSION "0.6"
38#define DRIVER_SHORT "idmouse"
39#define DRIVER_AUTHOR "Florian 'Floe' Echtler <echtler@fs.tum.de>"
40#define DRIVER_DESC "Siemens ID Mouse FingerTIP Sensor Driver"
41
42/* minor number for misc USB devices */
43#define USB_IDMOUSE_MINOR_BASE 132
44
45/* vendor and device IDs */
46#define ID_SIEMENS 0x0681
47#define ID_IDMOUSE 0x0005
48#define ID_CHERRY 0x0010
49
50/* device ID table */
51static const struct usb_device_id idmouse_table[] = {
52 {USB_DEVICE(ID_SIEMENS, ID_IDMOUSE)}, /* Siemens ID Mouse (Professional) */
53 {USB_DEVICE(ID_SIEMENS, ID_CHERRY )}, /* Cherry FingerTIP ID Board */
54 {} /* terminating null entry */
55};
56
57/* sensor commands */
58#define FTIP_RESET 0x20
59#define FTIP_ACQUIRE 0x21
60#define FTIP_RELEASE 0x22
61#define FTIP_BLINK 0x23 /* LSB of value = blink pulse width */
62#define FTIP_SCROLL 0x24
63
64#define ftip_command(dev, command, value, index) \
65 usb_control_msg (dev->udev, usb_sndctrlpipe (dev->udev, 0), command, \
66 USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, value, index, NULL, 0, 1000)
67
68MODULE_DEVICE_TABLE(usb, idmouse_table);
69static DEFINE_MUTEX(open_disc_mutex);
70
71/* structure to hold all of our device specific stuff */
72struct usb_idmouse {
73
74 struct usb_device *udev; /* save off the usb device pointer */
75 struct usb_interface *interface; /* the interface for this device */
76
77 unsigned char *bulk_in_buffer; /* the buffer to receive data */
78 size_t bulk_in_size; /* the maximum bulk packet size */
79 size_t orig_bi_size; /* same as above, but reported by the device */
80 __u8 bulk_in_endpointAddr; /* the address of the bulk in endpoint */
81
82 int open; /* if the port is open or not */
83 int present; /* if the device is not disconnected */
84 struct mutex lock; /* locks this structure */
85
86};
87
88/* local function prototypes */
89static ssize_t idmouse_read(struct file *file, char __user *buffer,
90 size_t count, loff_t * ppos);
91
92static int idmouse_open(struct inode *inode, struct file *file);
93static int idmouse_release(struct inode *inode, struct file *file);
94
95static int idmouse_probe(struct usb_interface *interface,
96 const struct usb_device_id *id);
97
98static void idmouse_disconnect(struct usb_interface *interface);
99static int idmouse_suspend(struct usb_interface *intf, pm_message_t message);
100static int idmouse_resume(struct usb_interface *intf);
101
102/* file operation pointers */
103static const struct file_operations idmouse_fops = {
104 .owner = THIS_MODULE,
105 .read = idmouse_read,
106 .open = idmouse_open,
107 .release = idmouse_release,
108 .llseek = default_llseek,
109};
110
111/* class driver information */
112static struct usb_class_driver idmouse_class = {
113 .name = "idmouse%d",
114 .fops = &idmouse_fops,
115 .minor_base = USB_IDMOUSE_MINOR_BASE,
116};
117
118/* usb specific object needed to register this driver with the usb subsystem */
119static struct usb_driver idmouse_driver = {
120 .name = DRIVER_SHORT,
121 .probe = idmouse_probe,
122 .disconnect = idmouse_disconnect,
123 .suspend = idmouse_suspend,
124 .resume = idmouse_resume,
125 .reset_resume = idmouse_resume,
126 .id_table = idmouse_table,
127 .supports_autosuspend = 1,
128};
129
130static int idmouse_create_image(struct usb_idmouse *dev)
131{
132 int bytes_read;
133 int bulk_read;
134 int result;
135
136 memcpy(dev->bulk_in_buffer, HEADER, sizeof(HEADER)-1);
137 bytes_read = sizeof(HEADER)-1;
138
139 /* reset the device and set a fast blink rate */
140 result = ftip_command(dev, FTIP_RELEASE, 0, 0);
141 if (result < 0)
142 goto reset;
143 result = ftip_command(dev, FTIP_BLINK, 1, 0);
144 if (result < 0)
145 goto reset;
146
147 /* initialize the sensor - sending this command twice */
148 /* significantly reduces the rate of failed reads */
149 result = ftip_command(dev, FTIP_ACQUIRE, 0, 0);
150 if (result < 0)
151 goto reset;
152 result = ftip_command(dev, FTIP_ACQUIRE, 0, 0);
153 if (result < 0)
154 goto reset;
155
156 /* start the readout - sending this command twice */
157 /* presumably enables the high dynamic range mode */
158 result = ftip_command(dev, FTIP_RESET, 0, 0);
159 if (result < 0)
160 goto reset;
161 result = ftip_command(dev, FTIP_RESET, 0, 0);
162 if (result < 0)
163 goto reset;
164
165 /* loop over a blocking bulk read to get data from the device */
166 while (bytes_read < IMGSIZE) {
167 result = usb_bulk_msg (dev->udev,
168 usb_rcvbulkpipe (dev->udev, dev->bulk_in_endpointAddr),
169 dev->bulk_in_buffer + bytes_read,
170 dev->bulk_in_size, &bulk_read, 5000);
171 if (result < 0) {
172 /* Maybe this error was caused by the increased packet size? */
173 /* Reset to the original value and tell userspace to retry. */
174 if (dev->bulk_in_size != dev->orig_bi_size) {
175 dev->bulk_in_size = dev->orig_bi_size;
176 result = -EAGAIN;
177 }
178 break;
179 }
180 if (signal_pending(current)) {
181 result = -EINTR;
182 break;
183 }
184 bytes_read += bulk_read;
185 }
186
187 /* reset the device */
188reset:
189 ftip_command(dev, FTIP_RELEASE, 0, 0);
190
191 /* check for valid image */
192 /* right border should be black (0x00) */
193 for (bytes_read = sizeof(HEADER)-1 + WIDTH-1; bytes_read < IMGSIZE; bytes_read += WIDTH)
194 if (dev->bulk_in_buffer[bytes_read] != 0x00)
195 return -EAGAIN;
196
197 /* lower border should be white (0xFF) */
198 for (bytes_read = IMGSIZE-WIDTH; bytes_read < IMGSIZE-1; bytes_read++)
199 if (dev->bulk_in_buffer[bytes_read] != 0xFF)
200 return -EAGAIN;
201
202 /* should be IMGSIZE == 65040 */
203 dev_dbg(&dev->interface->dev, "read %d bytes fingerprint data\n",
204 bytes_read);
205 return result;
206}
207
208/* PM operations are nops as this driver does IO only during open() */
209static int idmouse_suspend(struct usb_interface *intf, pm_message_t message)
210{
211 return 0;
212}
213
214static int idmouse_resume(struct usb_interface *intf)
215{
216 return 0;
217}
218
219static inline void idmouse_delete(struct usb_idmouse *dev)
220{
221 kfree(dev->bulk_in_buffer);
222 kfree(dev);
223}
224
225static int idmouse_open(struct inode *inode, struct file *file)
226{
227 struct usb_idmouse *dev;
228 struct usb_interface *interface;
229 int result;
230
231 /* get the interface from minor number and driver information */
232 interface = usb_find_interface (&idmouse_driver, iminor (inode));
233 if (!interface)
234 return -ENODEV;
235
236 mutex_lock(&open_disc_mutex);
237 /* get the device information block from the interface */
238 dev = usb_get_intfdata(interface);
239 if (!dev) {
240 mutex_unlock(&open_disc_mutex);
241 return -ENODEV;
242 }
243
244 /* lock this device */
245 mutex_lock(&dev->lock);
246 mutex_unlock(&open_disc_mutex);
247
248 /* check if already open */
249 if (dev->open) {
250
251 /* already open, so fail */
252 result = -EBUSY;
253
254 } else {
255
256 /* create a new image and check for success */
257 result = usb_autopm_get_interface(interface);
258 if (result)
259 goto error;
260 result = idmouse_create_image (dev);
261 if (result)
262 goto error;
263 usb_autopm_put_interface(interface);
264
265 /* increment our usage count for the driver */
266 ++dev->open;
267
268 /* save our object in the file's private structure */
269 file->private_data = dev;
270
271 }
272
273error:
274
275 /* unlock this device */
276 mutex_unlock(&dev->lock);
277 return result;
278}
279
280static int idmouse_release(struct inode *inode, struct file *file)
281{
282 struct usb_idmouse *dev;
283
284 dev = file->private_data;
285
286 if (dev == NULL)
287 return -ENODEV;
288
289 mutex_lock(&open_disc_mutex);
290 /* lock our device */
291 mutex_lock(&dev->lock);
292
293 /* are we really open? */
294 if (dev->open <= 0) {
295 mutex_unlock(&dev->lock);
296 mutex_unlock(&open_disc_mutex);
297 return -ENODEV;
298 }
299
300 --dev->open;
301
302 if (!dev->present) {
303 /* the device was unplugged before the file was released */
304 mutex_unlock(&dev->lock);
305 mutex_unlock(&open_disc_mutex);
306 idmouse_delete(dev);
307 } else {
308 mutex_unlock(&dev->lock);
309 mutex_unlock(&open_disc_mutex);
310 }
311 return 0;
312}
313
314static ssize_t idmouse_read(struct file *file, char __user *buffer, size_t count,
315 loff_t * ppos)
316{
317 struct usb_idmouse *dev = file->private_data;
318 int result;
319
320 /* lock this object */
321 mutex_lock(&dev->lock);
322
323 /* verify that the device wasn't unplugged */
324 if (!dev->present) {
325 mutex_unlock(&dev->lock);
326 return -ENODEV;
327 }
328
329 result = simple_read_from_buffer(buffer, count, ppos,
330 dev->bulk_in_buffer, IMGSIZE);
331 /* unlock the device */
332 mutex_unlock(&dev->lock);
333 return result;
334}
335
336static int idmouse_probe(struct usb_interface *interface,
337 const struct usb_device_id *id)
338{
339 struct usb_device *udev = interface_to_usbdev(interface);
340 struct usb_idmouse *dev;
341 struct usb_host_interface *iface_desc;
342 struct usb_endpoint_descriptor *endpoint;
343 int result;
344
345 /* check if we have gotten the data or the hid interface */
346 iface_desc = &interface->altsetting[0];
347 if (iface_desc->desc.bInterfaceClass != 0x0A)
348 return -ENODEV;
349
350 /* allocate memory for our device state and initialize it */
351 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
352 if (dev == NULL)
353 return -ENOMEM;
354
355 mutex_init(&dev->lock);
356 dev->udev = udev;
357 dev->interface = interface;
358
359 /* set up the endpoint information - use only the first bulk-in endpoint */
360 endpoint = &iface_desc->endpoint[0].desc;
361 if (!dev->bulk_in_endpointAddr && usb_endpoint_is_bulk_in(endpoint)) {
362 /* we found a bulk in endpoint */
363 dev->orig_bi_size = usb_endpoint_maxp(endpoint);
364 dev->bulk_in_size = 0x200; /* works _much_ faster */
365 dev->bulk_in_endpointAddr = endpoint->bEndpointAddress;
366 dev->bulk_in_buffer =
367 kmalloc(IMGSIZE + dev->bulk_in_size, GFP_KERNEL);
368
369 if (!dev->bulk_in_buffer) {
370 dev_err(&interface->dev, "Unable to allocate input buffer.\n");
371 idmouse_delete(dev);
372 return -ENOMEM;
373 }
374 }
375
376 if (!(dev->bulk_in_endpointAddr)) {
377 dev_err(&interface->dev, "Unable to find bulk-in endpoint.\n");
378 idmouse_delete(dev);
379 return -ENODEV;
380 }
381 /* allow device read, write and ioctl */
382 dev->present = 1;
383
384 /* we can register the device now, as it is ready */
385 usb_set_intfdata(interface, dev);
386 result = usb_register_dev(interface, &idmouse_class);
387 if (result) {
388 /* something prevented us from registering this device */
389 dev_err(&interface->dev, "Unble to allocate minor number.\n");
390 usb_set_intfdata(interface, NULL);
391 idmouse_delete(dev);
392 return result;
393 }
394
395 /* be noisy */
396 dev_info(&interface->dev,"%s now attached\n",DRIVER_DESC);
397
398 return 0;
399}
400
401static void idmouse_disconnect(struct usb_interface *interface)
402{
403 struct usb_idmouse *dev;
404
405 /* get device structure */
406 dev = usb_get_intfdata(interface);
407
408 /* give back our minor */
409 usb_deregister_dev(interface, &idmouse_class);
410
411 mutex_lock(&open_disc_mutex);
412 usb_set_intfdata(interface, NULL);
413 /* lock the device */
414 mutex_lock(&dev->lock);
415 mutex_unlock(&open_disc_mutex);
416
417 /* prevent device read, write and ioctl */
418 dev->present = 0;
419
420 /* if the device is opened, idmouse_release will clean this up */
421 if (!dev->open) {
422 mutex_unlock(&dev->lock);
423 idmouse_delete(dev);
424 } else {
425 /* unlock */
426 mutex_unlock(&dev->lock);
427 }
428
429 dev_info(&interface->dev, "disconnected\n");
430}
431
432module_usb_driver(idmouse_driver);
433
434MODULE_AUTHOR(DRIVER_AUTHOR);
435MODULE_DESCRIPTION(DRIVER_DESC);
436MODULE_LICENSE("GPL");
437