Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * k10temp.c - AMD Family 10h/11h/12h/14h/15h/16h/17h
4 * processor hardware monitoring
5 *
6 * Copyright (c) 2009 Clemens Ladisch <clemens@ladisch.de>
7 * Copyright (c) 2020 Guenter Roeck <linux@roeck-us.net>
8 *
9 * Implementation notes:
10 * - CCD register address information as well as the calculation to
11 * convert raw register values is from https://github.com/ocerman/zenpower.
12 * The information is not confirmed from chip datasheets, but experiments
13 * suggest that it provides reasonable temperature values.
14 */
15
16#include <linux/bitops.h>
17#include <linux/err.h>
18#include <linux/hwmon.h>
19#include <linux/init.h>
20#include <linux/module.h>
21#include <linux/pci.h>
22#include <linux/pci_ids.h>
23#include <asm/amd_nb.h>
24#include <asm/processor.h>
25
26MODULE_DESCRIPTION("AMD Family 10h+ CPU core temperature monitor");
27MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
28MODULE_LICENSE("GPL");
29
30static bool force;
31module_param(force, bool, 0444);
32MODULE_PARM_DESC(force, "force loading on processors with erratum 319");
33
34/* Provide lock for writing to NB_SMU_IND_ADDR */
35static DEFINE_MUTEX(nb_smu_ind_mutex);
36
37#ifndef PCI_DEVICE_ID_AMD_15H_M70H_NB_F3
38#define PCI_DEVICE_ID_AMD_15H_M70H_NB_F3 0x15b3
39#endif
40
41/* CPUID function 0x80000001, ebx */
42#define CPUID_PKGTYPE_MASK GENMASK(31, 28)
43#define CPUID_PKGTYPE_F 0x00000000
44#define CPUID_PKGTYPE_AM2R2_AM3 0x10000000
45
46/* DRAM controller (PCI function 2) */
47#define REG_DCT0_CONFIG_HIGH 0x094
48#define DDR3_MODE BIT(8)
49
50/* miscellaneous (PCI function 3) */
51#define REG_HARDWARE_THERMAL_CONTROL 0x64
52#define HTC_ENABLE BIT(0)
53
54#define REG_REPORTED_TEMPERATURE 0xa4
55
56#define REG_NORTHBRIDGE_CAPABILITIES 0xe8
57#define NB_CAP_HTC BIT(10)
58
59/*
60 * For F15h M60h and M70h, REG_HARDWARE_THERMAL_CONTROL
61 * and REG_REPORTED_TEMPERATURE have been moved to
62 * D0F0xBC_xD820_0C64 [Hardware Temperature Control]
63 * D0F0xBC_xD820_0CA4 [Reported Temperature Control]
64 */
65#define F15H_M60H_HARDWARE_TEMP_CTRL_OFFSET 0xd8200c64
66#define F15H_M60H_REPORTED_TEMP_CTRL_OFFSET 0xd8200ca4
67
68/* Common for Zen CPU families (Family 17h and 18h and 19h and 1Ah) */
69#define ZEN_REPORTED_TEMP_CTRL_BASE 0x00059800
70
71#define ZEN_CCD_TEMP(offset, x) (ZEN_REPORTED_TEMP_CTRL_BASE + \
72 (offset) + ((x) * 4))
73#define ZEN_CCD_TEMP_VALID BIT(11)
74#define ZEN_CCD_TEMP_MASK GENMASK(10, 0)
75
76#define ZEN_CUR_TEMP_SHIFT 21
77#define ZEN_CUR_TEMP_RANGE_SEL_MASK BIT(19)
78#define ZEN_CUR_TEMP_TJ_SEL_MASK GENMASK(17, 16)
79
80/*
81 * AMD's Industrial processor 3255 supports temperature from -40 deg to 105 deg Celsius.
82 * Use the model name to identify 3255 CPUs and set a flag to display negative temperature.
83 * Do not round off to zero for negative Tctl or Tdie values if the flag is set
84 */
85#define AMD_I3255_STR "3255"
86
87struct k10temp_data {
88 struct pci_dev *pdev;
89 void (*read_htcreg)(struct pci_dev *pdev, u32 *regval);
90 void (*read_tempreg)(struct pci_dev *pdev, u32 *regval);
91 int temp_offset;
92 u32 temp_adjust_mask;
93 u32 show_temp;
94 bool is_zen;
95 u32 ccd_offset;
96 bool disp_negative;
97};
98
99#define TCTL_BIT 0
100#define TDIE_BIT 1
101#define TCCD_BIT(x) ((x) + 2)
102
103#define HAVE_TEMP(d, channel) ((d)->show_temp & BIT(channel))
104
105struct tctl_offset {
106 u8 model;
107 char const *id;
108 int offset;
109};
110
111static const struct tctl_offset tctl_offset_table[] = {
112 { 0x17, "AMD Ryzen 5 1600X", 20000 },
113 { 0x17, "AMD Ryzen 7 1700X", 20000 },
114 { 0x17, "AMD Ryzen 7 1800X", 20000 },
115 { 0x17, "AMD Ryzen 7 2700X", 10000 },
116 { 0x17, "AMD Ryzen Threadripper 19", 27000 }, /* 19{00,20,50}X */
117 { 0x17, "AMD Ryzen Threadripper 29", 27000 }, /* 29{20,50,70,90}[W]X */
118};
119
120static void read_htcreg_pci(struct pci_dev *pdev, u32 *regval)
121{
122 pci_read_config_dword(pdev, REG_HARDWARE_THERMAL_CONTROL, regval);
123}
124
125static void read_tempreg_pci(struct pci_dev *pdev, u32 *regval)
126{
127 pci_read_config_dword(pdev, REG_REPORTED_TEMPERATURE, regval);
128}
129
130static void amd_nb_index_read(struct pci_dev *pdev, unsigned int devfn,
131 unsigned int base, int offset, u32 *val)
132{
133 mutex_lock(&nb_smu_ind_mutex);
134 pci_bus_write_config_dword(pdev->bus, devfn,
135 base, offset);
136 pci_bus_read_config_dword(pdev->bus, devfn,
137 base + 4, val);
138 mutex_unlock(&nb_smu_ind_mutex);
139}
140
141static void read_htcreg_nb_f15(struct pci_dev *pdev, u32 *regval)
142{
143 amd_nb_index_read(pdev, PCI_DEVFN(0, 0), 0xb8,
144 F15H_M60H_HARDWARE_TEMP_CTRL_OFFSET, regval);
145}
146
147static void read_tempreg_nb_f15(struct pci_dev *pdev, u32 *regval)
148{
149 amd_nb_index_read(pdev, PCI_DEVFN(0, 0), 0xb8,
150 F15H_M60H_REPORTED_TEMP_CTRL_OFFSET, regval);
151}
152
153static void read_tempreg_nb_zen(struct pci_dev *pdev, u32 *regval)
154{
155 if (amd_smn_read(amd_pci_dev_to_node_id(pdev),
156 ZEN_REPORTED_TEMP_CTRL_BASE, regval))
157 *regval = 0;
158}
159
160static int read_ccd_temp_reg(struct k10temp_data *data, int ccd, u32 *regval)
161{
162 u16 node_id = amd_pci_dev_to_node_id(data->pdev);
163
164 return amd_smn_read(node_id, ZEN_CCD_TEMP(data->ccd_offset, ccd), regval);
165}
166
167static long get_raw_temp(struct k10temp_data *data)
168{
169 u32 regval;
170 long temp;
171
172 data->read_tempreg(data->pdev, ®val);
173 temp = (regval >> ZEN_CUR_TEMP_SHIFT) * 125;
174 if ((regval & data->temp_adjust_mask) ||
175 (regval & ZEN_CUR_TEMP_TJ_SEL_MASK) == ZEN_CUR_TEMP_TJ_SEL_MASK)
176 temp -= 49000;
177 return temp;
178}
179
180static const char *k10temp_temp_label[] = {
181 "Tctl",
182 "Tdie",
183 "Tccd1",
184 "Tccd2",
185 "Tccd3",
186 "Tccd4",
187 "Tccd5",
188 "Tccd6",
189 "Tccd7",
190 "Tccd8",
191 "Tccd9",
192 "Tccd10",
193 "Tccd11",
194 "Tccd12",
195};
196
197static int k10temp_read_labels(struct device *dev,
198 enum hwmon_sensor_types type,
199 u32 attr, int channel, const char **str)
200{
201 switch (type) {
202 case hwmon_temp:
203 *str = k10temp_temp_label[channel];
204 break;
205 default:
206 return -EOPNOTSUPP;
207 }
208 return 0;
209}
210
211static int k10temp_read_temp(struct device *dev, u32 attr, int channel,
212 long *val)
213{
214 struct k10temp_data *data = dev_get_drvdata(dev);
215 int ret = -EOPNOTSUPP;
216 u32 regval;
217
218 switch (attr) {
219 case hwmon_temp_input:
220 switch (channel) {
221 case 0: /* Tctl */
222 *val = get_raw_temp(data);
223 if (*val < 0 && !data->disp_negative)
224 *val = 0;
225 break;
226 case 1: /* Tdie */
227 *val = get_raw_temp(data) - data->temp_offset;
228 if (*val < 0 && !data->disp_negative)
229 *val = 0;
230 break;
231 case 2 ... 13: /* Tccd{1-12} */
232 ret = read_ccd_temp_reg(data, channel - 2, ®val);
233
234 if (ret)
235 return ret;
236
237 *val = (regval & ZEN_CCD_TEMP_MASK) * 125 - 49000;
238 break;
239 default:
240 return ret;
241 }
242 break;
243 case hwmon_temp_max:
244 *val = 70 * 1000;
245 break;
246 case hwmon_temp_crit:
247 data->read_htcreg(data->pdev, ®val);
248 *val = ((regval >> 16) & 0x7f) * 500 + 52000;
249 break;
250 case hwmon_temp_crit_hyst:
251 data->read_htcreg(data->pdev, ®val);
252 *val = (((regval >> 16) & 0x7f)
253 - ((regval >> 24) & 0xf)) * 500 + 52000;
254 break;
255 default:
256 return ret;
257 }
258 return 0;
259}
260
261static int k10temp_read(struct device *dev, enum hwmon_sensor_types type,
262 u32 attr, int channel, long *val)
263{
264 switch (type) {
265 case hwmon_temp:
266 return k10temp_read_temp(dev, attr, channel, val);
267 default:
268 return -EOPNOTSUPP;
269 }
270}
271
272static umode_t k10temp_is_visible(const void *drvdata,
273 enum hwmon_sensor_types type,
274 u32 attr, int channel)
275{
276 const struct k10temp_data *data = drvdata;
277 struct pci_dev *pdev = data->pdev;
278 u32 reg;
279
280 switch (type) {
281 case hwmon_temp:
282 switch (attr) {
283 case hwmon_temp_input:
284 if (!HAVE_TEMP(data, channel))
285 return 0;
286 break;
287 case hwmon_temp_max:
288 if (channel || data->is_zen)
289 return 0;
290 break;
291 case hwmon_temp_crit:
292 case hwmon_temp_crit_hyst:
293 if (channel || !data->read_htcreg)
294 return 0;
295
296 pci_read_config_dword(pdev,
297 REG_NORTHBRIDGE_CAPABILITIES,
298 ®);
299 if (!(reg & NB_CAP_HTC))
300 return 0;
301
302 data->read_htcreg(data->pdev, ®);
303 if (!(reg & HTC_ENABLE))
304 return 0;
305 break;
306 case hwmon_temp_label:
307 /* Show temperature labels only on Zen CPUs */
308 if (!data->is_zen || !HAVE_TEMP(data, channel))
309 return 0;
310 break;
311 default:
312 return 0;
313 }
314 break;
315 default:
316 return 0;
317 }
318 return 0444;
319}
320
321static bool has_erratum_319(struct pci_dev *pdev)
322{
323 u32 pkg_type, reg_dram_cfg;
324
325 if (boot_cpu_data.x86 != 0x10)
326 return false;
327
328 /*
329 * Erratum 319: The thermal sensor of Socket F/AM2+ processors
330 * may be unreliable.
331 */
332 pkg_type = cpuid_ebx(0x80000001) & CPUID_PKGTYPE_MASK;
333 if (pkg_type == CPUID_PKGTYPE_F)
334 return true;
335 if (pkg_type != CPUID_PKGTYPE_AM2R2_AM3)
336 return false;
337
338 /* DDR3 memory implies socket AM3, which is good */
339 pci_bus_read_config_dword(pdev->bus,
340 PCI_DEVFN(PCI_SLOT(pdev->devfn), 2),
341 REG_DCT0_CONFIG_HIGH, ®_dram_cfg);
342 if (reg_dram_cfg & DDR3_MODE)
343 return false;
344
345 /*
346 * Unfortunately it is possible to run a socket AM3 CPU with DDR2
347 * memory. We blacklist all the cores which do exist in socket AM2+
348 * format. It still isn't perfect, as RB-C2 cores exist in both AM2+
349 * and AM3 formats, but that's the best we can do.
350 */
351 return boot_cpu_data.x86_model < 4 ||
352 (boot_cpu_data.x86_model == 4 && boot_cpu_data.x86_stepping <= 2);
353}
354
355static const struct hwmon_channel_info * const k10temp_info[] = {
356 HWMON_CHANNEL_INFO(temp,
357 HWMON_T_INPUT | HWMON_T_MAX |
358 HWMON_T_CRIT | HWMON_T_CRIT_HYST |
359 HWMON_T_LABEL,
360 HWMON_T_INPUT | HWMON_T_LABEL,
361 HWMON_T_INPUT | HWMON_T_LABEL,
362 HWMON_T_INPUT | HWMON_T_LABEL,
363 HWMON_T_INPUT | HWMON_T_LABEL,
364 HWMON_T_INPUT | HWMON_T_LABEL,
365 HWMON_T_INPUT | HWMON_T_LABEL,
366 HWMON_T_INPUT | HWMON_T_LABEL,
367 HWMON_T_INPUT | HWMON_T_LABEL,
368 HWMON_T_INPUT | HWMON_T_LABEL,
369 HWMON_T_INPUT | HWMON_T_LABEL,
370 HWMON_T_INPUT | HWMON_T_LABEL,
371 HWMON_T_INPUT | HWMON_T_LABEL,
372 HWMON_T_INPUT | HWMON_T_LABEL),
373 NULL
374};
375
376static const struct hwmon_ops k10temp_hwmon_ops = {
377 .is_visible = k10temp_is_visible,
378 .read = k10temp_read,
379 .read_string = k10temp_read_labels,
380};
381
382static const struct hwmon_chip_info k10temp_chip_info = {
383 .ops = &k10temp_hwmon_ops,
384 .info = k10temp_info,
385};
386
387static void k10temp_get_ccd_support(struct k10temp_data *data, int limit)
388{
389 u32 regval;
390 int i;
391
392 for (i = 0; i < limit; i++) {
393 /*
394 * Ignore inaccessible CCDs.
395 *
396 * Some systems will return a register value of 0, and the TEMP_VALID
397 * bit check below will naturally fail.
398 *
399 * Other systems will return a PCI_ERROR_RESPONSE (0xFFFFFFFF) for
400 * the register value. And this will incorrectly pass the TEMP_VALID
401 * bit check.
402 */
403 if (read_ccd_temp_reg(data, i, ®val))
404 continue;
405
406 if (regval & ZEN_CCD_TEMP_VALID)
407 data->show_temp |= BIT(TCCD_BIT(i));
408 }
409}
410
411static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
412{
413 int unreliable = has_erratum_319(pdev);
414 struct device *dev = &pdev->dev;
415 struct k10temp_data *data;
416 struct device *hwmon_dev;
417 int i;
418
419 if (unreliable) {
420 if (!force) {
421 dev_err(dev,
422 "unreliable CPU thermal sensor; monitoring disabled\n");
423 return -ENODEV;
424 }
425 dev_warn(dev,
426 "unreliable CPU thermal sensor; check erratum 319\n");
427 }
428
429 data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
430 if (!data)
431 return -ENOMEM;
432
433 data->pdev = pdev;
434 data->show_temp |= BIT(TCTL_BIT); /* Always show Tctl */
435
436 if (boot_cpu_data.x86 == 0x17 &&
437 strstr(boot_cpu_data.x86_model_id, AMD_I3255_STR)) {
438 data->disp_negative = true;
439 }
440
441 data->is_zen = cpu_feature_enabled(X86_FEATURE_ZEN);
442 if (data->is_zen) {
443 data->temp_adjust_mask = ZEN_CUR_TEMP_RANGE_SEL_MASK;
444 data->read_tempreg = read_tempreg_nb_zen;
445 } else if (boot_cpu_data.x86 == 0x15 &&
446 ((boot_cpu_data.x86_model & 0xf0) == 0x60 ||
447 (boot_cpu_data.x86_model & 0xf0) == 0x70)) {
448 data->read_htcreg = read_htcreg_nb_f15;
449 data->read_tempreg = read_tempreg_nb_f15;
450 } else {
451 data->read_htcreg = read_htcreg_pci;
452 data->read_tempreg = read_tempreg_pci;
453 }
454
455 if (boot_cpu_data.x86 == 0x17 || boot_cpu_data.x86 == 0x18) {
456 switch (boot_cpu_data.x86_model) {
457 case 0x1: /* Zen */
458 case 0x8: /* Zen+ */
459 case 0x11: /* Zen APU */
460 case 0x18: /* Zen+ APU */
461 data->ccd_offset = 0x154;
462 k10temp_get_ccd_support(data, 4);
463 break;
464 case 0x31: /* Zen2 Threadripper */
465 case 0x60: /* Renoir */
466 case 0x68: /* Lucienne */
467 case 0x71: /* Zen2 */
468 data->ccd_offset = 0x154;
469 k10temp_get_ccd_support(data, 8);
470 break;
471 case 0xa0 ... 0xaf:
472 data->ccd_offset = 0x300;
473 k10temp_get_ccd_support(data, 8);
474 break;
475 }
476 } else if (boot_cpu_data.x86 == 0x19) {
477 switch (boot_cpu_data.x86_model) {
478 case 0x0 ... 0x1: /* Zen3 SP3/TR */
479 case 0x8: /* Zen3 TR Chagall */
480 case 0x21: /* Zen3 Ryzen Desktop */
481 case 0x50 ... 0x5f: /* Green Sardine */
482 data->ccd_offset = 0x154;
483 k10temp_get_ccd_support(data, 8);
484 break;
485 case 0x40 ... 0x4f: /* Yellow Carp */
486 data->ccd_offset = 0x300;
487 k10temp_get_ccd_support(data, 8);
488 break;
489 case 0x60 ... 0x6f:
490 case 0x70 ... 0x7f:
491 data->ccd_offset = 0x308;
492 k10temp_get_ccd_support(data, 8);
493 break;
494 case 0x10 ... 0x1f:
495 case 0xa0 ... 0xaf:
496 data->ccd_offset = 0x300;
497 k10temp_get_ccd_support(data, 12);
498 break;
499 }
500 }
501
502 for (i = 0; i < ARRAY_SIZE(tctl_offset_table); i++) {
503 const struct tctl_offset *entry = &tctl_offset_table[i];
504
505 if (boot_cpu_data.x86 == entry->model &&
506 strstr(boot_cpu_data.x86_model_id, entry->id)) {
507 data->show_temp |= BIT(TDIE_BIT); /* show Tdie */
508 data->temp_offset = entry->offset;
509 break;
510 }
511 }
512
513 hwmon_dev = devm_hwmon_device_register_with_info(dev, "k10temp", data,
514 &k10temp_chip_info,
515 NULL);
516 return PTR_ERR_OR_ZERO(hwmon_dev);
517}
518
519static const struct pci_device_id k10temp_id_table[] = {
520 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) },
521 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) },
522 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
523 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F3) },
524 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M10H_F3) },
525 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F3) },
526 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M60H_NB_F3) },
527 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M70H_NB_F3) },
528 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F3) },
529 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F3) },
530 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_DF_F3) },
531 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M10H_DF_F3) },
532 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M30H_DF_F3) },
533 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M60H_DF_F3) },
534 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M70H_DF_F3) },
535 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_MA0H_DF_F3) },
536 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_DF_F3) },
537 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_M10H_DF_F3) },
538 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_M40H_DF_F3) },
539 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_M50H_DF_F3) },
540 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_M60H_DF_F3) },
541 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_M70H_DF_F3) },
542 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_M78H_DF_F3) },
543 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_1AH_M00H_DF_F3) },
544 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_1AH_M20H_DF_F3) },
545 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_1AH_M60H_DF_F3) },
546 { PCI_VDEVICE(HYGON, PCI_DEVICE_ID_AMD_17H_DF_F3) },
547 {}
548};
549MODULE_DEVICE_TABLE(pci, k10temp_id_table);
550
551static struct pci_driver k10temp_driver = {
552 .name = "k10temp",
553 .id_table = k10temp_id_table,
554 .probe = k10temp_probe,
555};
556
557module_pci_driver(k10temp_driver);
1/*
2 * k10temp.c - AMD Family 10h/11h/12h/14h/15h processor hardware monitoring
3 *
4 * Copyright (c) 2009 Clemens Ladisch <clemens@ladisch.de>
5 *
6 *
7 * This driver is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License; either
9 * version 2 of the License, or (at your option) any later version.
10 *
11 * This driver is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
14 * See the GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this driver; if not, see <http://www.gnu.org/licenses/>.
18 */
19
20#include <linux/err.h>
21#include <linux/hwmon.h>
22#include <linux/hwmon-sysfs.h>
23#include <linux/init.h>
24#include <linux/module.h>
25#include <linux/pci.h>
26#include <asm/processor.h>
27
28MODULE_DESCRIPTION("AMD Family 10h+ CPU core temperature monitor");
29MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
30MODULE_LICENSE("GPL");
31
32static bool force;
33module_param(force, bool, 0444);
34MODULE_PARM_DESC(force, "force loading on processors with erratum 319");
35
36/* PCI-IDs for Northbridge devices not used anywhere else */
37#define PCI_DEVICE_ID_AMD_15H_M10H_NB_F3 0x1403
38
39/* CPUID function 0x80000001, ebx */
40#define CPUID_PKGTYPE_MASK 0xf0000000
41#define CPUID_PKGTYPE_F 0x00000000
42#define CPUID_PKGTYPE_AM2R2_AM3 0x10000000
43
44/* DRAM controller (PCI function 2) */
45#define REG_DCT0_CONFIG_HIGH 0x094
46#define DDR3_MODE 0x00000100
47
48/* miscellaneous (PCI function 3) */
49#define REG_HARDWARE_THERMAL_CONTROL 0x64
50#define HTC_ENABLE 0x00000001
51
52#define REG_REPORTED_TEMPERATURE 0xa4
53
54#define REG_NORTHBRIDGE_CAPABILITIES 0xe8
55#define NB_CAP_HTC 0x00000400
56
57static ssize_t show_temp(struct device *dev,
58 struct device_attribute *attr, char *buf)
59{
60 u32 regval;
61
62 pci_read_config_dword(to_pci_dev(dev),
63 REG_REPORTED_TEMPERATURE, ®val);
64 return sprintf(buf, "%u\n", (regval >> 21) * 125);
65}
66
67static ssize_t show_temp_max(struct device *dev,
68 struct device_attribute *attr, char *buf)
69{
70 return sprintf(buf, "%d\n", 70 * 1000);
71}
72
73static ssize_t show_temp_crit(struct device *dev,
74 struct device_attribute *devattr, char *buf)
75{
76 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
77 int show_hyst = attr->index;
78 u32 regval;
79 int value;
80
81 pci_read_config_dword(to_pci_dev(dev),
82 REG_HARDWARE_THERMAL_CONTROL, ®val);
83 value = ((regval >> 16) & 0x7f) * 500 + 52000;
84 if (show_hyst)
85 value -= ((regval >> 24) & 0xf) * 500;
86 return sprintf(buf, "%d\n", value);
87}
88
89static ssize_t show_name(struct device *dev,
90 struct device_attribute *attr, char *buf)
91{
92 return sprintf(buf, "k10temp\n");
93}
94
95static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL);
96static DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_max, NULL);
97static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp_crit, NULL, 0);
98static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IRUGO, show_temp_crit, NULL, 1);
99static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
100
101static bool __devinit has_erratum_319(struct pci_dev *pdev)
102{
103 u32 pkg_type, reg_dram_cfg;
104
105 if (boot_cpu_data.x86 != 0x10)
106 return false;
107
108 /*
109 * Erratum 319: The thermal sensor of Socket F/AM2+ processors
110 * may be unreliable.
111 */
112 pkg_type = cpuid_ebx(0x80000001) & CPUID_PKGTYPE_MASK;
113 if (pkg_type == CPUID_PKGTYPE_F)
114 return true;
115 if (pkg_type != CPUID_PKGTYPE_AM2R2_AM3)
116 return false;
117
118 /* DDR3 memory implies socket AM3, which is good */
119 pci_bus_read_config_dword(pdev->bus,
120 PCI_DEVFN(PCI_SLOT(pdev->devfn), 2),
121 REG_DCT0_CONFIG_HIGH, ®_dram_cfg);
122 if (reg_dram_cfg & DDR3_MODE)
123 return false;
124
125 /*
126 * Unfortunately it is possible to run a socket AM3 CPU with DDR2
127 * memory. We blacklist all the cores which do exist in socket AM2+
128 * format. It still isn't perfect, as RB-C2 cores exist in both AM2+
129 * and AM3 formats, but that's the best we can do.
130 */
131 return boot_cpu_data.x86_model < 4 ||
132 (boot_cpu_data.x86_model == 4 && boot_cpu_data.x86_mask <= 2);
133}
134
135static int __devinit k10temp_probe(struct pci_dev *pdev,
136 const struct pci_device_id *id)
137{
138 struct device *hwmon_dev;
139 u32 reg_caps, reg_htc;
140 int unreliable = has_erratum_319(pdev);
141 int err;
142
143 if (unreliable && !force) {
144 dev_err(&pdev->dev,
145 "unreliable CPU thermal sensor; monitoring disabled\n");
146 err = -ENODEV;
147 goto exit;
148 }
149
150 err = device_create_file(&pdev->dev, &dev_attr_temp1_input);
151 if (err)
152 goto exit;
153 err = device_create_file(&pdev->dev, &dev_attr_temp1_max);
154 if (err)
155 goto exit_remove;
156
157 pci_read_config_dword(pdev, REG_NORTHBRIDGE_CAPABILITIES, ®_caps);
158 pci_read_config_dword(pdev, REG_HARDWARE_THERMAL_CONTROL, ®_htc);
159 if ((reg_caps & NB_CAP_HTC) && (reg_htc & HTC_ENABLE)) {
160 err = device_create_file(&pdev->dev,
161 &sensor_dev_attr_temp1_crit.dev_attr);
162 if (err)
163 goto exit_remove;
164 err = device_create_file(&pdev->dev,
165 &sensor_dev_attr_temp1_crit_hyst.dev_attr);
166 if (err)
167 goto exit_remove;
168 }
169
170 err = device_create_file(&pdev->dev, &dev_attr_name);
171 if (err)
172 goto exit_remove;
173
174 hwmon_dev = hwmon_device_register(&pdev->dev);
175 if (IS_ERR(hwmon_dev)) {
176 err = PTR_ERR(hwmon_dev);
177 goto exit_remove;
178 }
179 pci_set_drvdata(pdev, hwmon_dev);
180
181 if (unreliable && force)
182 dev_warn(&pdev->dev,
183 "unreliable CPU thermal sensor; check erratum 319\n");
184 return 0;
185
186exit_remove:
187 device_remove_file(&pdev->dev, &dev_attr_name);
188 device_remove_file(&pdev->dev, &dev_attr_temp1_input);
189 device_remove_file(&pdev->dev, &dev_attr_temp1_max);
190 device_remove_file(&pdev->dev,
191 &sensor_dev_attr_temp1_crit.dev_attr);
192 device_remove_file(&pdev->dev,
193 &sensor_dev_attr_temp1_crit_hyst.dev_attr);
194exit:
195 return err;
196}
197
198static void __devexit k10temp_remove(struct pci_dev *pdev)
199{
200 hwmon_device_unregister(pci_get_drvdata(pdev));
201 device_remove_file(&pdev->dev, &dev_attr_name);
202 device_remove_file(&pdev->dev, &dev_attr_temp1_input);
203 device_remove_file(&pdev->dev, &dev_attr_temp1_max);
204 device_remove_file(&pdev->dev,
205 &sensor_dev_attr_temp1_crit.dev_attr);
206 device_remove_file(&pdev->dev,
207 &sensor_dev_attr_temp1_crit_hyst.dev_attr);
208 pci_set_drvdata(pdev, NULL);
209}
210
211static DEFINE_PCI_DEVICE_TABLE(k10temp_id_table) = {
212 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) },
213 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) },
214 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
215 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F3) },
216 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M10H_NB_F3) },
217 {}
218};
219MODULE_DEVICE_TABLE(pci, k10temp_id_table);
220
221static struct pci_driver k10temp_driver = {
222 .name = "k10temp",
223 .id_table = k10temp_id_table,
224 .probe = k10temp_probe,
225 .remove = __devexit_p(k10temp_remove),
226};
227
228module_pci_driver(k10temp_driver);