Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * linux/arch/arm/common/sa1111.c
4 *
5 * SA1111 support
6 *
7 * Original code by John Dorsey
8 *
9 * This file contains all generic SA1111 support.
10 *
11 * All initialization functions provided here are intended to be called
12 * from machine specific code with proper arguments when required.
13 */
14#include <linux/module.h>
15#include <linux/gpio/driver.h>
16#include <linux/init.h>
17#include <linux/irq.h>
18#include <linux/kernel.h>
19#include <linux/delay.h>
20#include <linux/errno.h>
21#include <linux/ioport.h>
22#include <linux/platform_device.h>
23#include <linux/slab.h>
24#include <linux/spinlock.h>
25#include <linux/dma-map-ops.h>
26#include <linux/clk.h>
27#include <linux/io.h>
28
29#include <asm/mach/irq.h>
30#include <asm/mach-types.h>
31#include <linux/sizes.h>
32
33#include <asm/hardware/sa1111.h>
34
35#ifdef CONFIG_ARCH_SA1100
36#include <mach/hardware.h>
37#endif
38
39/* SA1111 IRQs */
40#define IRQ_GPAIN0 (0)
41#define IRQ_GPAIN1 (1)
42#define IRQ_GPAIN2 (2)
43#define IRQ_GPAIN3 (3)
44#define IRQ_GPBIN0 (4)
45#define IRQ_GPBIN1 (5)
46#define IRQ_GPBIN2 (6)
47#define IRQ_GPBIN3 (7)
48#define IRQ_GPBIN4 (8)
49#define IRQ_GPBIN5 (9)
50#define IRQ_GPCIN0 (10)
51#define IRQ_GPCIN1 (11)
52#define IRQ_GPCIN2 (12)
53#define IRQ_GPCIN3 (13)
54#define IRQ_GPCIN4 (14)
55#define IRQ_GPCIN5 (15)
56#define IRQ_GPCIN6 (16)
57#define IRQ_GPCIN7 (17)
58#define IRQ_MSTXINT (18)
59#define IRQ_MSRXINT (19)
60#define IRQ_MSSTOPERRINT (20)
61#define IRQ_TPTXINT (21)
62#define IRQ_TPRXINT (22)
63#define IRQ_TPSTOPERRINT (23)
64#define SSPXMTINT (24)
65#define SSPRCVINT (25)
66#define SSPROR (26)
67#define AUDXMTDMADONEA (32)
68#define AUDRCVDMADONEA (33)
69#define AUDXMTDMADONEB (34)
70#define AUDRCVDMADONEB (35)
71#define AUDTFSR (36)
72#define AUDRFSR (37)
73#define AUDTUR (38)
74#define AUDROR (39)
75#define AUDDTS (40)
76#define AUDRDD (41)
77#define AUDSTO (42)
78#define IRQ_USBPWR (43)
79#define IRQ_HCIM (44)
80#define IRQ_HCIBUFFACC (45)
81#define IRQ_HCIRMTWKP (46)
82#define IRQ_NHCIMFCIR (47)
83#define IRQ_USB_PORT_RESUME (48)
84#define IRQ_S0_READY_NINT (49)
85#define IRQ_S1_READY_NINT (50)
86#define IRQ_S0_CD_VALID (51)
87#define IRQ_S1_CD_VALID (52)
88#define IRQ_S0_BVD1_STSCHG (53)
89#define IRQ_S1_BVD1_STSCHG (54)
90#define SA1111_IRQ_NR (55)
91
92extern void sa1110_mb_enable(void);
93extern void sa1110_mb_disable(void);
94
95/*
96 * We keep the following data for the overall SA1111. Note that the
97 * struct device and struct resource are "fake"; they should be supplied
98 * by the bus above us. However, in the interests of getting all SA1111
99 * drivers converted over to the device model, we provide this as an
100 * anchor point for all the other drivers.
101 */
102struct sa1111 {
103 struct device *dev;
104 struct clk *clk;
105 unsigned long phys;
106 int irq;
107 int irq_base; /* base for cascaded on-chip IRQs */
108 spinlock_t lock;
109 void __iomem *base;
110 struct sa1111_platform_data *pdata;
111 struct irq_domain *irqdomain;
112 struct gpio_chip gc;
113#ifdef CONFIG_PM
114 void *saved_state;
115#endif
116};
117
118/*
119 * We _really_ need to eliminate this. Its only users
120 * are the PWM and DMA checking code.
121 */
122static struct sa1111 *g_sa1111;
123
124struct sa1111_dev_info {
125 unsigned long offset;
126 unsigned long skpcr_mask;
127 bool dma;
128 unsigned int devid;
129 unsigned int hwirq[6];
130};
131
132static struct sa1111_dev_info sa1111_devices[] = {
133 {
134 .offset = SA1111_USB,
135 .skpcr_mask = SKPCR_UCLKEN,
136 .dma = true,
137 .devid = SA1111_DEVID_USB,
138 .hwirq = {
139 IRQ_USBPWR,
140 IRQ_HCIM,
141 IRQ_HCIBUFFACC,
142 IRQ_HCIRMTWKP,
143 IRQ_NHCIMFCIR,
144 IRQ_USB_PORT_RESUME
145 },
146 },
147 {
148 .offset = 0x0600,
149 .skpcr_mask = SKPCR_I2SCLKEN | SKPCR_L3CLKEN,
150 .dma = true,
151 .devid = SA1111_DEVID_SAC,
152 .hwirq = {
153 AUDXMTDMADONEA,
154 AUDXMTDMADONEB,
155 AUDRCVDMADONEA,
156 AUDRCVDMADONEB
157 },
158 },
159 {
160 .offset = 0x0800,
161 .skpcr_mask = SKPCR_SCLKEN,
162 .devid = SA1111_DEVID_SSP,
163 },
164 {
165 .offset = SA1111_KBD,
166 .skpcr_mask = SKPCR_PTCLKEN,
167 .devid = SA1111_DEVID_PS2_KBD,
168 .hwirq = {
169 IRQ_TPRXINT,
170 IRQ_TPTXINT
171 },
172 },
173 {
174 .offset = SA1111_MSE,
175 .skpcr_mask = SKPCR_PMCLKEN,
176 .devid = SA1111_DEVID_PS2_MSE,
177 .hwirq = {
178 IRQ_MSRXINT,
179 IRQ_MSTXINT
180 },
181 },
182 {
183 .offset = 0x1800,
184 .skpcr_mask = 0,
185 .devid = SA1111_DEVID_PCMCIA,
186 .hwirq = {
187 IRQ_S0_READY_NINT,
188 IRQ_S0_CD_VALID,
189 IRQ_S0_BVD1_STSCHG,
190 IRQ_S1_READY_NINT,
191 IRQ_S1_CD_VALID,
192 IRQ_S1_BVD1_STSCHG,
193 },
194 },
195};
196
197static int sa1111_map_irq(struct sa1111 *sachip, irq_hw_number_t hwirq)
198{
199 return irq_create_mapping(sachip->irqdomain, hwirq);
200}
201
202/*
203 * SA1111 interrupt support. Since clearing an IRQ while there are
204 * active IRQs causes the interrupt output to pulse, the upper levels
205 * will call us again if there are more interrupts to process.
206 */
207static void sa1111_irq_handler(struct irq_desc *desc)
208{
209 unsigned int stat0, stat1, i;
210 struct sa1111 *sachip = irq_desc_get_handler_data(desc);
211 struct irq_domain *irqdomain;
212 void __iomem *mapbase = sachip->base + SA1111_INTC;
213
214 stat0 = readl_relaxed(mapbase + SA1111_INTSTATCLR0);
215 stat1 = readl_relaxed(mapbase + SA1111_INTSTATCLR1);
216
217 writel_relaxed(stat0, mapbase + SA1111_INTSTATCLR0);
218
219 desc->irq_data.chip->irq_ack(&desc->irq_data);
220
221 writel_relaxed(stat1, mapbase + SA1111_INTSTATCLR1);
222
223 if (stat0 == 0 && stat1 == 0) {
224 do_bad_IRQ(desc);
225 return;
226 }
227
228 irqdomain = sachip->irqdomain;
229
230 for (i = 0; stat0; i++, stat0 >>= 1)
231 if (stat0 & 1)
232 generic_handle_domain_irq(irqdomain, i);
233
234 for (i = 32; stat1; i++, stat1 >>= 1)
235 if (stat1 & 1)
236 generic_handle_domain_irq(irqdomain, i);
237
238 /* For level-based interrupts */
239 desc->irq_data.chip->irq_unmask(&desc->irq_data);
240}
241
242static u32 sa1111_irqmask(struct irq_data *d)
243{
244 return BIT(irqd_to_hwirq(d) & 31);
245}
246
247static int sa1111_irqbank(struct irq_data *d)
248{
249 return (irqd_to_hwirq(d) / 32) * 4;
250}
251
252static void sa1111_ack_irq(struct irq_data *d)
253{
254}
255
256static void sa1111_mask_irq(struct irq_data *d)
257{
258 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
259 void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
260 u32 ie;
261
262 ie = readl_relaxed(mapbase + SA1111_INTEN0);
263 ie &= ~sa1111_irqmask(d);
264 writel(ie, mapbase + SA1111_INTEN0);
265}
266
267static void sa1111_unmask_irq(struct irq_data *d)
268{
269 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
270 void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
271 u32 ie;
272
273 ie = readl_relaxed(mapbase + SA1111_INTEN0);
274 ie |= sa1111_irqmask(d);
275 writel_relaxed(ie, mapbase + SA1111_INTEN0);
276}
277
278/*
279 * Attempt to re-trigger the interrupt. The SA1111 contains a register
280 * (INTSET) which claims to do this. However, in practice no amount of
281 * manipulation of INTEN and INTSET guarantees that the interrupt will
282 * be triggered. In fact, its very difficult, if not impossible to get
283 * INTSET to re-trigger the interrupt.
284 */
285static int sa1111_retrigger_irq(struct irq_data *d)
286{
287 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
288 void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
289 u32 ip, mask = sa1111_irqmask(d);
290 int i;
291
292 ip = readl_relaxed(mapbase + SA1111_INTPOL0);
293 for (i = 0; i < 8; i++) {
294 writel_relaxed(ip ^ mask, mapbase + SA1111_INTPOL0);
295 writel_relaxed(ip, mapbase + SA1111_INTPOL0);
296 if (readl_relaxed(mapbase + SA1111_INTSTATCLR0) & mask)
297 break;
298 }
299
300 if (i == 8) {
301 pr_err("Danger Will Robinson: failed to re-trigger IRQ%d\n",
302 d->irq);
303 return 0;
304 }
305
306 return 1;
307}
308
309static int sa1111_type_irq(struct irq_data *d, unsigned int flags)
310{
311 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
312 void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
313 u32 ip, mask = sa1111_irqmask(d);
314
315 if (flags == IRQ_TYPE_PROBE)
316 return 0;
317
318 if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
319 return -EINVAL;
320
321 ip = readl_relaxed(mapbase + SA1111_INTPOL0);
322 if (flags & IRQ_TYPE_EDGE_RISING)
323 ip &= ~mask;
324 else
325 ip |= mask;
326 writel_relaxed(ip, mapbase + SA1111_INTPOL0);
327 writel_relaxed(ip, mapbase + SA1111_WAKEPOL0);
328
329 return 0;
330}
331
332static int sa1111_wake_irq(struct irq_data *d, unsigned int on)
333{
334 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
335 void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
336 u32 we, mask = sa1111_irqmask(d);
337
338 we = readl_relaxed(mapbase + SA1111_WAKEEN0);
339 if (on)
340 we |= mask;
341 else
342 we &= ~mask;
343 writel_relaxed(we, mapbase + SA1111_WAKEEN0);
344
345 return 0;
346}
347
348static struct irq_chip sa1111_irq_chip = {
349 .name = "SA1111",
350 .irq_ack = sa1111_ack_irq,
351 .irq_mask = sa1111_mask_irq,
352 .irq_unmask = sa1111_unmask_irq,
353 .irq_retrigger = sa1111_retrigger_irq,
354 .irq_set_type = sa1111_type_irq,
355 .irq_set_wake = sa1111_wake_irq,
356};
357
358static int sa1111_irqdomain_map(struct irq_domain *d, unsigned int irq,
359 irq_hw_number_t hwirq)
360{
361 struct sa1111 *sachip = d->host_data;
362
363 /* Disallow unavailable interrupts */
364 if (hwirq > SSPROR && hwirq < AUDXMTDMADONEA)
365 return -EINVAL;
366
367 irq_set_chip_data(irq, sachip);
368 irq_set_chip_and_handler(irq, &sa1111_irq_chip, handle_edge_irq);
369 irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
370
371 return 0;
372}
373
374static const struct irq_domain_ops sa1111_irqdomain_ops = {
375 .map = sa1111_irqdomain_map,
376 .xlate = irq_domain_xlate_twocell,
377};
378
379static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
380{
381 void __iomem *irqbase = sachip->base + SA1111_INTC;
382 int ret;
383
384 /*
385 * We're guaranteed that this region hasn't been taken.
386 */
387 request_mem_region(sachip->phys + SA1111_INTC, 512, "irq");
388
389 ret = irq_alloc_descs(-1, irq_base, SA1111_IRQ_NR, -1);
390 if (ret <= 0) {
391 dev_err(sachip->dev, "unable to allocate %u irqs: %d\n",
392 SA1111_IRQ_NR, ret);
393 if (ret == 0)
394 ret = -EINVAL;
395 return ret;
396 }
397
398 sachip->irq_base = ret;
399
400 /* disable all IRQs */
401 writel_relaxed(0, irqbase + SA1111_INTEN0);
402 writel_relaxed(0, irqbase + SA1111_INTEN1);
403 writel_relaxed(0, irqbase + SA1111_WAKEEN0);
404 writel_relaxed(0, irqbase + SA1111_WAKEEN1);
405
406 /*
407 * detect on rising edge. Note: Feb 2001 Errata for SA1111
408 * specifies that S0ReadyInt and S1ReadyInt should be '1'.
409 */
410 writel_relaxed(0, irqbase + SA1111_INTPOL0);
411 writel_relaxed(BIT(IRQ_S0_READY_NINT & 31) |
412 BIT(IRQ_S1_READY_NINT & 31),
413 irqbase + SA1111_INTPOL1);
414
415 /* clear all IRQs */
416 writel_relaxed(~0, irqbase + SA1111_INTSTATCLR0);
417 writel_relaxed(~0, irqbase + SA1111_INTSTATCLR1);
418
419 sachip->irqdomain = irq_domain_add_linear(NULL, SA1111_IRQ_NR,
420 &sa1111_irqdomain_ops,
421 sachip);
422 if (!sachip->irqdomain) {
423 irq_free_descs(sachip->irq_base, SA1111_IRQ_NR);
424 return -ENOMEM;
425 }
426
427 irq_domain_associate_many(sachip->irqdomain,
428 sachip->irq_base + IRQ_GPAIN0,
429 IRQ_GPAIN0, SSPROR + 1 - IRQ_GPAIN0);
430 irq_domain_associate_many(sachip->irqdomain,
431 sachip->irq_base + AUDXMTDMADONEA,
432 AUDXMTDMADONEA,
433 IRQ_S1_BVD1_STSCHG + 1 - AUDXMTDMADONEA);
434
435 /*
436 * Register SA1111 interrupt
437 */
438 irq_set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING);
439 irq_set_chained_handler_and_data(sachip->irq, sa1111_irq_handler,
440 sachip);
441
442 dev_info(sachip->dev, "Providing IRQ%u-%u\n",
443 sachip->irq_base, sachip->irq_base + SA1111_IRQ_NR - 1);
444
445 return 0;
446}
447
448static void sa1111_remove_irq(struct sa1111 *sachip)
449{
450 struct irq_domain *domain = sachip->irqdomain;
451 void __iomem *irqbase = sachip->base + SA1111_INTC;
452 int i;
453
454 /* disable all IRQs */
455 writel_relaxed(0, irqbase + SA1111_INTEN0);
456 writel_relaxed(0, irqbase + SA1111_INTEN1);
457 writel_relaxed(0, irqbase + SA1111_WAKEEN0);
458 writel_relaxed(0, irqbase + SA1111_WAKEEN1);
459
460 irq_set_chained_handler_and_data(sachip->irq, NULL, NULL);
461 for (i = 0; i < SA1111_IRQ_NR; i++)
462 irq_dispose_mapping(irq_find_mapping(domain, i));
463 irq_domain_remove(domain);
464
465 release_mem_region(sachip->phys + SA1111_INTC, 512);
466}
467
468enum {
469 SA1111_GPIO_PXDDR = (SA1111_GPIO_PADDR - SA1111_GPIO_PADDR),
470 SA1111_GPIO_PXDRR = (SA1111_GPIO_PADRR - SA1111_GPIO_PADDR),
471 SA1111_GPIO_PXDWR = (SA1111_GPIO_PADWR - SA1111_GPIO_PADDR),
472 SA1111_GPIO_PXSDR = (SA1111_GPIO_PASDR - SA1111_GPIO_PADDR),
473 SA1111_GPIO_PXSSR = (SA1111_GPIO_PASSR - SA1111_GPIO_PADDR),
474};
475
476static struct sa1111 *gc_to_sa1111(struct gpio_chip *gc)
477{
478 return container_of(gc, struct sa1111, gc);
479}
480
481static void __iomem *sa1111_gpio_map_reg(struct sa1111 *sachip, unsigned offset)
482{
483 void __iomem *reg = sachip->base + SA1111_GPIO;
484
485 if (offset < 4)
486 return reg + SA1111_GPIO_PADDR;
487 if (offset < 10)
488 return reg + SA1111_GPIO_PBDDR;
489 if (offset < 18)
490 return reg + SA1111_GPIO_PCDDR;
491 return NULL;
492}
493
494static u32 sa1111_gpio_map_bit(unsigned offset)
495{
496 if (offset < 4)
497 return BIT(offset);
498 if (offset < 10)
499 return BIT(offset - 4);
500 if (offset < 18)
501 return BIT(offset - 10);
502 return 0;
503}
504
505static void sa1111_gpio_modify(void __iomem *reg, u32 mask, u32 set)
506{
507 u32 val;
508
509 val = readl_relaxed(reg);
510 val &= ~mask;
511 val |= mask & set;
512 writel_relaxed(val, reg);
513}
514
515static int sa1111_gpio_get_direction(struct gpio_chip *gc, unsigned offset)
516{
517 struct sa1111 *sachip = gc_to_sa1111(gc);
518 void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
519 u32 mask = sa1111_gpio_map_bit(offset);
520
521 return !!(readl_relaxed(reg + SA1111_GPIO_PXDDR) & mask);
522}
523
524static int sa1111_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
525{
526 struct sa1111 *sachip = gc_to_sa1111(gc);
527 unsigned long flags;
528 void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
529 u32 mask = sa1111_gpio_map_bit(offset);
530
531 spin_lock_irqsave(&sachip->lock, flags);
532 sa1111_gpio_modify(reg + SA1111_GPIO_PXDDR, mask, mask);
533 sa1111_gpio_modify(reg + SA1111_GPIO_PXSDR, mask, mask);
534 spin_unlock_irqrestore(&sachip->lock, flags);
535
536 return 0;
537}
538
539static int sa1111_gpio_direction_output(struct gpio_chip *gc, unsigned offset,
540 int value)
541{
542 struct sa1111 *sachip = gc_to_sa1111(gc);
543 unsigned long flags;
544 void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
545 u32 mask = sa1111_gpio_map_bit(offset);
546
547 spin_lock_irqsave(&sachip->lock, flags);
548 sa1111_gpio_modify(reg + SA1111_GPIO_PXDWR, mask, value ? mask : 0);
549 sa1111_gpio_modify(reg + SA1111_GPIO_PXSSR, mask, value ? mask : 0);
550 sa1111_gpio_modify(reg + SA1111_GPIO_PXDDR, mask, 0);
551 sa1111_gpio_modify(reg + SA1111_GPIO_PXSDR, mask, 0);
552 spin_unlock_irqrestore(&sachip->lock, flags);
553
554 return 0;
555}
556
557static int sa1111_gpio_get(struct gpio_chip *gc, unsigned offset)
558{
559 struct sa1111 *sachip = gc_to_sa1111(gc);
560 void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
561 u32 mask = sa1111_gpio_map_bit(offset);
562
563 return !!(readl_relaxed(reg + SA1111_GPIO_PXDRR) & mask);
564}
565
566static void sa1111_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
567{
568 struct sa1111 *sachip = gc_to_sa1111(gc);
569 unsigned long flags;
570 void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
571 u32 mask = sa1111_gpio_map_bit(offset);
572
573 spin_lock_irqsave(&sachip->lock, flags);
574 sa1111_gpio_modify(reg + SA1111_GPIO_PXDWR, mask, value ? mask : 0);
575 sa1111_gpio_modify(reg + SA1111_GPIO_PXSSR, mask, value ? mask : 0);
576 spin_unlock_irqrestore(&sachip->lock, flags);
577}
578
579static void sa1111_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
580 unsigned long *bits)
581{
582 struct sa1111 *sachip = gc_to_sa1111(gc);
583 unsigned long flags;
584 void __iomem *reg = sachip->base + SA1111_GPIO;
585 u32 msk, val;
586
587 msk = *mask;
588 val = *bits;
589
590 spin_lock_irqsave(&sachip->lock, flags);
591 sa1111_gpio_modify(reg + SA1111_GPIO_PADWR, msk & 15, val);
592 sa1111_gpio_modify(reg + SA1111_GPIO_PASSR, msk & 15, val);
593 sa1111_gpio_modify(reg + SA1111_GPIO_PBDWR, (msk >> 4) & 255, val >> 4);
594 sa1111_gpio_modify(reg + SA1111_GPIO_PBSSR, (msk >> 4) & 255, val >> 4);
595 sa1111_gpio_modify(reg + SA1111_GPIO_PCDWR, (msk >> 12) & 255, val >> 12);
596 sa1111_gpio_modify(reg + SA1111_GPIO_PCSSR, (msk >> 12) & 255, val >> 12);
597 spin_unlock_irqrestore(&sachip->lock, flags);
598}
599
600static int sa1111_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
601{
602 struct sa1111 *sachip = gc_to_sa1111(gc);
603
604 return sa1111_map_irq(sachip, offset);
605}
606
607static int sa1111_setup_gpios(struct sa1111 *sachip)
608{
609 sachip->gc.label = "sa1111";
610 sachip->gc.parent = sachip->dev;
611 sachip->gc.owner = THIS_MODULE;
612 sachip->gc.get_direction = sa1111_gpio_get_direction;
613 sachip->gc.direction_input = sa1111_gpio_direction_input;
614 sachip->gc.direction_output = sa1111_gpio_direction_output;
615 sachip->gc.get = sa1111_gpio_get;
616 sachip->gc.set = sa1111_gpio_set;
617 sachip->gc.set_multiple = sa1111_gpio_set_multiple;
618 sachip->gc.to_irq = sa1111_gpio_to_irq;
619 sachip->gc.base = -1;
620 sachip->gc.ngpio = 18;
621
622 return devm_gpiochip_add_data(sachip->dev, &sachip->gc, sachip);
623}
624
625/*
626 * Bring the SA1111 out of reset. This requires a set procedure:
627 * 1. nRESET asserted (by hardware)
628 * 2. CLK turned on from SA1110
629 * 3. nRESET deasserted
630 * 4. VCO turned on, PLL_BYPASS turned off
631 * 5. Wait lock time, then assert RCLKEn
632 * 7. PCR set to allow clocking of individual functions
633 *
634 * Until we've done this, the only registers we can access are:
635 * SBI_SKCR
636 * SBI_SMCR
637 * SBI_SKID
638 */
639static void sa1111_wake(struct sa1111 *sachip)
640{
641 unsigned long flags, r;
642
643 spin_lock_irqsave(&sachip->lock, flags);
644
645 clk_enable(sachip->clk);
646
647 /*
648 * Turn VCO on, and disable PLL Bypass.
649 */
650 r = readl_relaxed(sachip->base + SA1111_SKCR);
651 r &= ~SKCR_VCO_OFF;
652 writel_relaxed(r, sachip->base + SA1111_SKCR);
653 r |= SKCR_PLL_BYPASS | SKCR_OE_EN;
654 writel_relaxed(r, sachip->base + SA1111_SKCR);
655
656 /*
657 * Wait lock time. SA1111 manual _doesn't_
658 * specify a figure for this! We choose 100us.
659 */
660 udelay(100);
661
662 /*
663 * Enable RCLK. We also ensure that RDYEN is set.
664 */
665 r |= SKCR_RCLKEN | SKCR_RDYEN;
666 writel_relaxed(r, sachip->base + SA1111_SKCR);
667
668 /*
669 * Wait 14 RCLK cycles for the chip to finish coming out
670 * of reset. (RCLK=24MHz). This is 590ns.
671 */
672 udelay(1);
673
674 /*
675 * Ensure all clocks are initially off.
676 */
677 writel_relaxed(0, sachip->base + SA1111_SKPCR);
678
679 spin_unlock_irqrestore(&sachip->lock, flags);
680}
681
682#ifdef CONFIG_ARCH_SA1100
683
684static u32 sa1111_dma_mask[] = {
685 ~0,
686 ~(1 << 20),
687 ~(1 << 23),
688 ~(1 << 24),
689 ~(1 << 25),
690 ~(1 << 20),
691 ~(1 << 20),
692 0,
693};
694
695/*
696 * Configure the SA1111 shared memory controller.
697 */
698static void
699sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac,
700 unsigned int cas_latency)
701{
702 unsigned int smcr = SMCR_DTIM | SMCR_MBGE | FInsrt(drac, SMCR_DRAC);
703
704 if (cas_latency == 3)
705 smcr |= SMCR_CLAT;
706
707 writel_relaxed(smcr, sachip->base + SA1111_SMCR);
708
709 /*
710 * Now clear the bits in the DMA mask to work around the SA1111
711 * DMA erratum (Intel StrongARM SA-1111 Microprocessor Companion
712 * Chip Specification Update, June 2000, Erratum #7).
713 */
714 if (sachip->dev->dma_mask)
715 *sachip->dev->dma_mask &= sa1111_dma_mask[drac >> 2];
716
717 sachip->dev->coherent_dma_mask &= sa1111_dma_mask[drac >> 2];
718}
719#endif
720
721static void sa1111_dev_release(struct device *_dev)
722{
723 struct sa1111_dev *dev = to_sa1111_device(_dev);
724
725 kfree(dev);
726}
727
728static int
729sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
730 struct sa1111_dev_info *info)
731{
732 struct sa1111_dev *dev;
733 unsigned i;
734 int ret;
735
736 dev = kzalloc(sizeof(struct sa1111_dev), GFP_KERNEL);
737 if (!dev) {
738 ret = -ENOMEM;
739 goto err_alloc;
740 }
741
742 device_initialize(&dev->dev);
743 dev_set_name(&dev->dev, "%4.4lx", info->offset);
744 dev->devid = info->devid;
745 dev->dev.parent = sachip->dev;
746 dev->dev.bus = &sa1111_bus_type;
747 dev->dev.release = sa1111_dev_release;
748 dev->res.start = sachip->phys + info->offset;
749 dev->res.end = dev->res.start + 511;
750 dev->res.name = dev_name(&dev->dev);
751 dev->res.flags = IORESOURCE_MEM;
752 dev->mapbase = sachip->base + info->offset;
753 dev->skpcr_mask = info->skpcr_mask;
754
755 for (i = 0; i < ARRAY_SIZE(info->hwirq); i++)
756 dev->hwirq[i] = info->hwirq[i];
757
758 /*
759 * If the parent device has a DMA mask associated with it, and
760 * this child supports DMA, propagate it down to the children.
761 */
762 if (info->dma && sachip->dev->dma_mask) {
763 dev->dma_mask = *sachip->dev->dma_mask;
764 dev->dev.dma_mask = &dev->dma_mask;
765 dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask;
766 }
767
768 ret = request_resource(parent, &dev->res);
769 if (ret) {
770 dev_err(sachip->dev, "failed to allocate resource for %s\n",
771 dev->res.name);
772 goto err_resource;
773 }
774
775 ret = device_add(&dev->dev);
776 if (ret)
777 goto err_add;
778 return 0;
779
780 err_add:
781 release_resource(&dev->res);
782 err_resource:
783 put_device(&dev->dev);
784 err_alloc:
785 return ret;
786}
787
788static int __sa1111_probe(struct device *me, struct resource *mem, int irq)
789{
790 struct sa1111_platform_data *pd = me->platform_data;
791 struct sa1111 *sachip;
792 unsigned long id;
793 unsigned int has_devs;
794 int i, ret = -ENODEV;
795
796 if (!pd)
797 return -EINVAL;
798
799 sachip = devm_kzalloc(me, sizeof(struct sa1111), GFP_KERNEL);
800 if (!sachip)
801 return -ENOMEM;
802
803 sachip->clk = devm_clk_get(me, "SA1111_CLK");
804 if (IS_ERR(sachip->clk))
805 return PTR_ERR(sachip->clk);
806
807 ret = clk_prepare(sachip->clk);
808 if (ret)
809 return ret;
810
811 spin_lock_init(&sachip->lock);
812
813 sachip->dev = me;
814 dev_set_drvdata(sachip->dev, sachip);
815
816 sachip->pdata = pd;
817 sachip->phys = mem->start;
818 sachip->irq = irq;
819
820 /*
821 * Map the whole region. This also maps the
822 * registers for our children.
823 */
824 sachip->base = ioremap(mem->start, PAGE_SIZE * 2);
825 if (!sachip->base) {
826 ret = -ENOMEM;
827 goto err_clk_unprep;
828 }
829
830 /*
831 * Probe for the chip. Only touch the SBI registers.
832 */
833 id = readl_relaxed(sachip->base + SA1111_SKID);
834 if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
835 printk(KERN_DEBUG "SA1111 not detected: ID = %08lx\n", id);
836 ret = -ENODEV;
837 goto err_unmap;
838 }
839
840 pr_info("SA1111 Microprocessor Companion Chip: silicon revision %lx, metal revision %lx\n",
841 (id & SKID_SIREV_MASK) >> 4, id & SKID_MTREV_MASK);
842
843 /*
844 * We found it. Wake the chip up, and initialise.
845 */
846 sa1111_wake(sachip);
847
848 /*
849 * The interrupt controller must be initialised before any
850 * other device to ensure that the interrupts are available.
851 */
852 ret = sa1111_setup_irq(sachip, pd->irq_base);
853 if (ret)
854 goto err_clk;
855
856 /* Setup the GPIOs - should really be done after the IRQ setup */
857 ret = sa1111_setup_gpios(sachip);
858 if (ret)
859 goto err_irq;
860
861#ifdef CONFIG_ARCH_SA1100
862 {
863 unsigned int val;
864
865 /*
866 * The SDRAM configuration of the SA1110 and the SA1111 must
867 * match. This is very important to ensure that SA1111 accesses
868 * don't corrupt the SDRAM. Note that this ungates the SA1111's
869 * MBGNT signal, so we must have called sa1110_mb_disable()
870 * beforehand.
871 */
872 sa1111_configure_smc(sachip, 1,
873 FExtr(MDCNFG, MDCNFG_SA1110_DRAC0),
874 FExtr(MDCNFG, MDCNFG_SA1110_TDL0));
875
876 /*
877 * We only need to turn on DCLK whenever we want to use the
878 * DMA. It can otherwise be held firmly in the off position.
879 * (currently, we always enable it.)
880 */
881 val = readl_relaxed(sachip->base + SA1111_SKPCR);
882 writel_relaxed(val | SKPCR_DCLKEN, sachip->base + SA1111_SKPCR);
883
884 /*
885 * Enable the SA1110 memory bus request and grant signals.
886 */
887 sa1110_mb_enable();
888 }
889#endif
890
891 g_sa1111 = sachip;
892
893 has_devs = ~0;
894 if (pd)
895 has_devs &= ~pd->disable_devs;
896
897 for (i = 0; i < ARRAY_SIZE(sa1111_devices); i++)
898 if (sa1111_devices[i].devid & has_devs)
899 sa1111_init_one_child(sachip, mem, &sa1111_devices[i]);
900
901 return 0;
902
903 err_irq:
904 sa1111_remove_irq(sachip);
905 err_clk:
906 clk_disable(sachip->clk);
907 err_unmap:
908 iounmap(sachip->base);
909 err_clk_unprep:
910 clk_unprepare(sachip->clk);
911 return ret;
912}
913
914static int sa1111_remove_one(struct device *dev, void *data)
915{
916 struct sa1111_dev *sadev = to_sa1111_device(dev);
917 if (dev->bus != &sa1111_bus_type)
918 return 0;
919 device_del(&sadev->dev);
920 release_resource(&sadev->res);
921 put_device(&sadev->dev);
922 return 0;
923}
924
925static void __sa1111_remove(struct sa1111 *sachip)
926{
927 device_for_each_child(sachip->dev, NULL, sa1111_remove_one);
928
929 sa1111_remove_irq(sachip);
930
931 clk_disable(sachip->clk);
932 clk_unprepare(sachip->clk);
933
934 iounmap(sachip->base);
935}
936
937struct sa1111_save_data {
938 unsigned int skcr;
939 unsigned int skpcr;
940 unsigned int skcdr;
941 unsigned char skaud;
942 unsigned char skpwm0;
943 unsigned char skpwm1;
944
945 /*
946 * Interrupt controller
947 */
948 unsigned int intpol0;
949 unsigned int intpol1;
950 unsigned int inten0;
951 unsigned int inten1;
952 unsigned int wakepol0;
953 unsigned int wakepol1;
954 unsigned int wakeen0;
955 unsigned int wakeen1;
956};
957
958#ifdef CONFIG_PM
959
960static int sa1111_suspend_noirq(struct device *dev)
961{
962 struct sa1111 *sachip = dev_get_drvdata(dev);
963 struct sa1111_save_data *save;
964 unsigned long flags;
965 unsigned int val;
966 void __iomem *base;
967
968 save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL);
969 if (!save)
970 return -ENOMEM;
971 sachip->saved_state = save;
972
973 spin_lock_irqsave(&sachip->lock, flags);
974
975 /*
976 * Save state.
977 */
978 base = sachip->base;
979 save->skcr = readl_relaxed(base + SA1111_SKCR);
980 save->skpcr = readl_relaxed(base + SA1111_SKPCR);
981 save->skcdr = readl_relaxed(base + SA1111_SKCDR);
982 save->skaud = readl_relaxed(base + SA1111_SKAUD);
983 save->skpwm0 = readl_relaxed(base + SA1111_SKPWM0);
984 save->skpwm1 = readl_relaxed(base + SA1111_SKPWM1);
985
986 writel_relaxed(0, sachip->base + SA1111_SKPWM0);
987 writel_relaxed(0, sachip->base + SA1111_SKPWM1);
988
989 base = sachip->base + SA1111_INTC;
990 save->intpol0 = readl_relaxed(base + SA1111_INTPOL0);
991 save->intpol1 = readl_relaxed(base + SA1111_INTPOL1);
992 save->inten0 = readl_relaxed(base + SA1111_INTEN0);
993 save->inten1 = readl_relaxed(base + SA1111_INTEN1);
994 save->wakepol0 = readl_relaxed(base + SA1111_WAKEPOL0);
995 save->wakepol1 = readl_relaxed(base + SA1111_WAKEPOL1);
996 save->wakeen0 = readl_relaxed(base + SA1111_WAKEEN0);
997 save->wakeen1 = readl_relaxed(base + SA1111_WAKEEN1);
998
999 /*
1000 * Disable.
1001 */
1002 val = readl_relaxed(sachip->base + SA1111_SKCR);
1003 writel_relaxed(val | SKCR_SLEEP, sachip->base + SA1111_SKCR);
1004
1005 clk_disable(sachip->clk);
1006
1007 spin_unlock_irqrestore(&sachip->lock, flags);
1008
1009#ifdef CONFIG_ARCH_SA1100
1010 sa1110_mb_disable();
1011#endif
1012
1013 return 0;
1014}
1015
1016/*
1017 * sa1111_resume - Restore the SA1111 device state.
1018 * @dev: device to restore
1019 *
1020 * Restore the general state of the SA1111; clock control and
1021 * interrupt controller. Other parts of the SA1111 must be
1022 * restored by their respective drivers, and must be called
1023 * via LDM after this function.
1024 */
1025static int sa1111_resume_noirq(struct device *dev)
1026{
1027 struct sa1111 *sachip = dev_get_drvdata(dev);
1028 struct sa1111_save_data *save;
1029 unsigned long flags, id;
1030 void __iomem *base;
1031
1032 save = sachip->saved_state;
1033 if (!save)
1034 return 0;
1035
1036 /*
1037 * Ensure that the SA1111 is still here.
1038 * FIXME: shouldn't do this here.
1039 */
1040 id = readl_relaxed(sachip->base + SA1111_SKID);
1041 if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
1042 __sa1111_remove(sachip);
1043 dev_set_drvdata(dev, NULL);
1044 kfree(save);
1045 return 0;
1046 }
1047
1048 /*
1049 * First of all, wake up the chip.
1050 */
1051 sa1111_wake(sachip);
1052
1053#ifdef CONFIG_ARCH_SA1100
1054 /* Enable the memory bus request/grant signals */
1055 sa1110_mb_enable();
1056#endif
1057
1058 /*
1059 * Only lock for write ops. Also, sa1111_wake must be called with
1060 * released spinlock!
1061 */
1062 spin_lock_irqsave(&sachip->lock, flags);
1063
1064 writel_relaxed(0, sachip->base + SA1111_INTC + SA1111_INTEN0);
1065 writel_relaxed(0, sachip->base + SA1111_INTC + SA1111_INTEN1);
1066
1067 base = sachip->base;
1068 writel_relaxed(save->skcr, base + SA1111_SKCR);
1069 writel_relaxed(save->skpcr, base + SA1111_SKPCR);
1070 writel_relaxed(save->skcdr, base + SA1111_SKCDR);
1071 writel_relaxed(save->skaud, base + SA1111_SKAUD);
1072 writel_relaxed(save->skpwm0, base + SA1111_SKPWM0);
1073 writel_relaxed(save->skpwm1, base + SA1111_SKPWM1);
1074
1075 base = sachip->base + SA1111_INTC;
1076 writel_relaxed(save->intpol0, base + SA1111_INTPOL0);
1077 writel_relaxed(save->intpol1, base + SA1111_INTPOL1);
1078 writel_relaxed(save->inten0, base + SA1111_INTEN0);
1079 writel_relaxed(save->inten1, base + SA1111_INTEN1);
1080 writel_relaxed(save->wakepol0, base + SA1111_WAKEPOL0);
1081 writel_relaxed(save->wakepol1, base + SA1111_WAKEPOL1);
1082 writel_relaxed(save->wakeen0, base + SA1111_WAKEEN0);
1083 writel_relaxed(save->wakeen1, base + SA1111_WAKEEN1);
1084
1085 spin_unlock_irqrestore(&sachip->lock, flags);
1086
1087 sachip->saved_state = NULL;
1088 kfree(save);
1089
1090 return 0;
1091}
1092
1093#else
1094#define sa1111_suspend_noirq NULL
1095#define sa1111_resume_noirq NULL
1096#endif
1097
1098/**
1099 * sa1111_probe - probe for a single SA1111 chip.
1100 * @pdev: platform device.
1101 *
1102 * Probe for a SA1111 chip. This must be called
1103 * before any other SA1111-specific code.
1104 *
1105 * Returns:
1106 * * %-ENODEV - device not found.
1107 * * %-ENOMEM - memory allocation failure.
1108 * * %-EBUSY - physical address already marked in-use.
1109 * * %-EINVAL - no platform data passed
1110 * * %0 - successful.
1111 */
1112static int sa1111_probe(struct platform_device *pdev)
1113{
1114 struct resource *mem;
1115 int irq;
1116
1117 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1118 if (!mem)
1119 return -EINVAL;
1120 irq = platform_get_irq(pdev, 0);
1121 if (irq < 0)
1122 return irq;
1123
1124 return __sa1111_probe(&pdev->dev, mem, irq);
1125}
1126
1127static void sa1111_remove(struct platform_device *pdev)
1128{
1129 struct sa1111 *sachip = platform_get_drvdata(pdev);
1130
1131 if (sachip) {
1132#ifdef CONFIG_PM
1133 kfree(sachip->saved_state);
1134 sachip->saved_state = NULL;
1135#endif
1136 __sa1111_remove(sachip);
1137 platform_set_drvdata(pdev, NULL);
1138 }
1139}
1140
1141static struct dev_pm_ops sa1111_pm_ops = {
1142 .suspend_noirq = sa1111_suspend_noirq,
1143 .resume_noirq = sa1111_resume_noirq,
1144};
1145
1146/*
1147 * Not sure if this should be on the system bus or not yet.
1148 * We really want some way to register a system device at
1149 * the per-machine level, and then have this driver pick
1150 * up the registered devices.
1151 *
1152 * We also need to handle the SDRAM configuration for
1153 * PXA250/SA1110 machine classes.
1154 */
1155static struct platform_driver sa1111_device_driver = {
1156 .probe = sa1111_probe,
1157 .remove = sa1111_remove,
1158 .driver = {
1159 .name = "sa1111",
1160 .pm = &sa1111_pm_ops,
1161 },
1162};
1163
1164/*
1165 * Get the parent device driver (us) structure
1166 * from a child function device
1167 */
1168static inline struct sa1111 *sa1111_chip_driver(struct sa1111_dev *sadev)
1169{
1170 return (struct sa1111 *)dev_get_drvdata(sadev->dev.parent);
1171}
1172
1173/*
1174 * The bits in the opdiv field are non-linear.
1175 */
1176static unsigned char opdiv_table[] = { 1, 4, 2, 8 };
1177
1178static unsigned int __sa1111_pll_clock(struct sa1111 *sachip)
1179{
1180 unsigned int skcdr, fbdiv, ipdiv, opdiv;
1181
1182 skcdr = readl_relaxed(sachip->base + SA1111_SKCDR);
1183
1184 fbdiv = (skcdr & 0x007f) + 2;
1185 ipdiv = ((skcdr & 0x0f80) >> 7) + 2;
1186 opdiv = opdiv_table[(skcdr & 0x3000) >> 12];
1187
1188 return 3686400 * fbdiv / (ipdiv * opdiv);
1189}
1190
1191/**
1192 * sa1111_pll_clock - return the current PLL clock frequency.
1193 * @sadev: SA1111 function block
1194 *
1195 * BUG: we should look at SKCR. We also blindly believe that
1196 * the chip is being fed with the 3.6864MHz clock.
1197 *
1198 * Returns the PLL clock in Hz.
1199 */
1200unsigned int sa1111_pll_clock(struct sa1111_dev *sadev)
1201{
1202 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1203
1204 return __sa1111_pll_clock(sachip);
1205}
1206EXPORT_SYMBOL(sa1111_pll_clock);
1207
1208/**
1209 * sa1111_select_audio_mode - select I2S or AC link mode
1210 * @sadev: SA1111 function block
1211 * @mode: One of %SA1111_AUDIO_ACLINK or %SA1111_AUDIO_I2S
1212 *
1213 * Frob the SKCR to select AC Link mode or I2S mode for
1214 * the audio block.
1215 */
1216void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode)
1217{
1218 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1219 unsigned long flags;
1220 unsigned int val;
1221
1222 spin_lock_irqsave(&sachip->lock, flags);
1223
1224 val = readl_relaxed(sachip->base + SA1111_SKCR);
1225 if (mode == SA1111_AUDIO_I2S) {
1226 val &= ~SKCR_SELAC;
1227 } else {
1228 val |= SKCR_SELAC;
1229 }
1230 writel_relaxed(val, sachip->base + SA1111_SKCR);
1231
1232 spin_unlock_irqrestore(&sachip->lock, flags);
1233}
1234EXPORT_SYMBOL(sa1111_select_audio_mode);
1235
1236/**
1237 * sa1111_set_audio_rate - set the audio sample rate
1238 * @sadev: SA1111 SAC function block
1239 * @rate: sample rate to select
1240 */
1241int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate)
1242{
1243 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1244 unsigned int div;
1245
1246 if (sadev->devid != SA1111_DEVID_SAC)
1247 return -EINVAL;
1248
1249 div = (__sa1111_pll_clock(sachip) / 256 + rate / 2) / rate;
1250 if (div == 0)
1251 div = 1;
1252 if (div > 128)
1253 div = 128;
1254
1255 writel_relaxed(div - 1, sachip->base + SA1111_SKAUD);
1256
1257 return 0;
1258}
1259EXPORT_SYMBOL(sa1111_set_audio_rate);
1260
1261/**
1262 * sa1111_get_audio_rate - get the audio sample rate
1263 * @sadev: SA1111 SAC function block device
1264 */
1265int sa1111_get_audio_rate(struct sa1111_dev *sadev)
1266{
1267 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1268 unsigned long div;
1269
1270 if (sadev->devid != SA1111_DEVID_SAC)
1271 return -EINVAL;
1272
1273 div = readl_relaxed(sachip->base + SA1111_SKAUD) + 1;
1274
1275 return __sa1111_pll_clock(sachip) / (256 * div);
1276}
1277EXPORT_SYMBOL(sa1111_get_audio_rate);
1278
1279/*
1280 * Individual device operations.
1281 */
1282
1283/**
1284 * sa1111_enable_device - enable an on-chip SA1111 function block
1285 * @sadev: SA1111 function block device to enable
1286 */
1287int sa1111_enable_device(struct sa1111_dev *sadev)
1288{
1289 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1290 unsigned long flags;
1291 unsigned int val;
1292 int ret = 0;
1293
1294 if (sachip->pdata && sachip->pdata->enable)
1295 ret = sachip->pdata->enable(sachip->pdata->data, sadev->devid);
1296
1297 if (ret == 0) {
1298 spin_lock_irqsave(&sachip->lock, flags);
1299 val = readl_relaxed(sachip->base + SA1111_SKPCR);
1300 writel_relaxed(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
1301 spin_unlock_irqrestore(&sachip->lock, flags);
1302 }
1303 return ret;
1304}
1305EXPORT_SYMBOL(sa1111_enable_device);
1306
1307/**
1308 * sa1111_disable_device - disable an on-chip SA1111 function block
1309 * @sadev: SA1111 function block device to disable
1310 */
1311void sa1111_disable_device(struct sa1111_dev *sadev)
1312{
1313 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1314 unsigned long flags;
1315 unsigned int val;
1316
1317 spin_lock_irqsave(&sachip->lock, flags);
1318 val = readl_relaxed(sachip->base + SA1111_SKPCR);
1319 writel_relaxed(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
1320 spin_unlock_irqrestore(&sachip->lock, flags);
1321
1322 if (sachip->pdata && sachip->pdata->disable)
1323 sachip->pdata->disable(sachip->pdata->data, sadev->devid);
1324}
1325EXPORT_SYMBOL(sa1111_disable_device);
1326
1327int sa1111_get_irq(struct sa1111_dev *sadev, unsigned num)
1328{
1329 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1330 if (num >= ARRAY_SIZE(sadev->hwirq))
1331 return -EINVAL;
1332 return sa1111_map_irq(sachip, sadev->hwirq[num]);
1333}
1334EXPORT_SYMBOL_GPL(sa1111_get_irq);
1335
1336/*
1337 * SA1111 "Register Access Bus."
1338 *
1339 * We model this as a regular bus type, and hang devices directly
1340 * off this.
1341 */
1342static int sa1111_match(struct device *_dev, const struct device_driver *_drv)
1343{
1344 struct sa1111_dev *dev = to_sa1111_device(_dev);
1345 const struct sa1111_driver *drv = SA1111_DRV(_drv);
1346
1347 return !!(dev->devid & drv->devid);
1348}
1349
1350static int sa1111_bus_probe(struct device *dev)
1351{
1352 struct sa1111_dev *sadev = to_sa1111_device(dev);
1353 struct sa1111_driver *drv = SA1111_DRV(dev->driver);
1354 int ret = -ENODEV;
1355
1356 if (drv->probe)
1357 ret = drv->probe(sadev);
1358 return ret;
1359}
1360
1361static void sa1111_bus_remove(struct device *dev)
1362{
1363 struct sa1111_dev *sadev = to_sa1111_device(dev);
1364 struct sa1111_driver *drv = SA1111_DRV(dev->driver);
1365
1366 if (drv->remove)
1367 drv->remove(sadev);
1368}
1369
1370struct bus_type sa1111_bus_type = {
1371 .name = "sa1111-rab",
1372 .match = sa1111_match,
1373 .probe = sa1111_bus_probe,
1374 .remove = sa1111_bus_remove,
1375};
1376EXPORT_SYMBOL(sa1111_bus_type);
1377
1378int sa1111_driver_register(struct sa1111_driver *driver)
1379{
1380 driver->drv.bus = &sa1111_bus_type;
1381 return driver_register(&driver->drv);
1382}
1383EXPORT_SYMBOL(sa1111_driver_register);
1384
1385void sa1111_driver_unregister(struct sa1111_driver *driver)
1386{
1387 driver_unregister(&driver->drv);
1388}
1389EXPORT_SYMBOL(sa1111_driver_unregister);
1390
1391static int __init sa1111_init(void)
1392{
1393 int ret = bus_register(&sa1111_bus_type);
1394 if (ret == 0)
1395 platform_driver_register(&sa1111_device_driver);
1396 return ret;
1397}
1398
1399static void __exit sa1111_exit(void)
1400{
1401 platform_driver_unregister(&sa1111_device_driver);
1402 bus_unregister(&sa1111_bus_type);
1403}
1404
1405subsys_initcall(sa1111_init);
1406module_exit(sa1111_exit);
1407
1408MODULE_DESCRIPTION("Intel Corporation SA1111 core driver");
1409MODULE_LICENSE("GPL");
1/*
2 * linux/arch/arm/common/sa1111.c
3 *
4 * SA1111 support
5 *
6 * Original code by John Dorsey
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 *
12 * This file contains all generic SA1111 support.
13 *
14 * All initialization functions provided here are intended to be called
15 * from machine specific code with proper arguments when required.
16 */
17#include <linux/module.h>
18#include <linux/init.h>
19#include <linux/irq.h>
20#include <linux/kernel.h>
21#include <linux/delay.h>
22#include <linux/errno.h>
23#include <linux/ioport.h>
24#include <linux/platform_device.h>
25#include <linux/slab.h>
26#include <linux/spinlock.h>
27#include <linux/dma-mapping.h>
28#include <linux/clk.h>
29#include <linux/io.h>
30
31#include <mach/hardware.h>
32#include <asm/mach/irq.h>
33#include <asm/mach-types.h>
34#include <asm/sizes.h>
35
36#include <asm/hardware/sa1111.h>
37
38/* SA1111 IRQs */
39#define IRQ_GPAIN0 (0)
40#define IRQ_GPAIN1 (1)
41#define IRQ_GPAIN2 (2)
42#define IRQ_GPAIN3 (3)
43#define IRQ_GPBIN0 (4)
44#define IRQ_GPBIN1 (5)
45#define IRQ_GPBIN2 (6)
46#define IRQ_GPBIN3 (7)
47#define IRQ_GPBIN4 (8)
48#define IRQ_GPBIN5 (9)
49#define IRQ_GPCIN0 (10)
50#define IRQ_GPCIN1 (11)
51#define IRQ_GPCIN2 (12)
52#define IRQ_GPCIN3 (13)
53#define IRQ_GPCIN4 (14)
54#define IRQ_GPCIN5 (15)
55#define IRQ_GPCIN6 (16)
56#define IRQ_GPCIN7 (17)
57#define IRQ_MSTXINT (18)
58#define IRQ_MSRXINT (19)
59#define IRQ_MSSTOPERRINT (20)
60#define IRQ_TPTXINT (21)
61#define IRQ_TPRXINT (22)
62#define IRQ_TPSTOPERRINT (23)
63#define SSPXMTINT (24)
64#define SSPRCVINT (25)
65#define SSPROR (26)
66#define AUDXMTDMADONEA (32)
67#define AUDRCVDMADONEA (33)
68#define AUDXMTDMADONEB (34)
69#define AUDRCVDMADONEB (35)
70#define AUDTFSR (36)
71#define AUDRFSR (37)
72#define AUDTUR (38)
73#define AUDROR (39)
74#define AUDDTS (40)
75#define AUDRDD (41)
76#define AUDSTO (42)
77#define IRQ_USBPWR (43)
78#define IRQ_HCIM (44)
79#define IRQ_HCIBUFFACC (45)
80#define IRQ_HCIRMTWKP (46)
81#define IRQ_NHCIMFCIR (47)
82#define IRQ_USB_PORT_RESUME (48)
83#define IRQ_S0_READY_NINT (49)
84#define IRQ_S1_READY_NINT (50)
85#define IRQ_S0_CD_VALID (51)
86#define IRQ_S1_CD_VALID (52)
87#define IRQ_S0_BVD1_STSCHG (53)
88#define IRQ_S1_BVD1_STSCHG (54)
89#define SA1111_IRQ_NR (55)
90
91extern void sa1110_mb_enable(void);
92extern void sa1110_mb_disable(void);
93
94/*
95 * We keep the following data for the overall SA1111. Note that the
96 * struct device and struct resource are "fake"; they should be supplied
97 * by the bus above us. However, in the interests of getting all SA1111
98 * drivers converted over to the device model, we provide this as an
99 * anchor point for all the other drivers.
100 */
101struct sa1111 {
102 struct device *dev;
103 struct clk *clk;
104 unsigned long phys;
105 int irq;
106 int irq_base; /* base for cascaded on-chip IRQs */
107 spinlock_t lock;
108 void __iomem *base;
109 struct sa1111_platform_data *pdata;
110#ifdef CONFIG_PM
111 void *saved_state;
112#endif
113};
114
115/*
116 * We _really_ need to eliminate this. Its only users
117 * are the PWM and DMA checking code.
118 */
119static struct sa1111 *g_sa1111;
120
121struct sa1111_dev_info {
122 unsigned long offset;
123 unsigned long skpcr_mask;
124 bool dma;
125 unsigned int devid;
126 unsigned int irq[6];
127};
128
129static struct sa1111_dev_info sa1111_devices[] = {
130 {
131 .offset = SA1111_USB,
132 .skpcr_mask = SKPCR_UCLKEN,
133 .dma = true,
134 .devid = SA1111_DEVID_USB,
135 .irq = {
136 IRQ_USBPWR,
137 IRQ_HCIM,
138 IRQ_HCIBUFFACC,
139 IRQ_HCIRMTWKP,
140 IRQ_NHCIMFCIR,
141 IRQ_USB_PORT_RESUME
142 },
143 },
144 {
145 .offset = 0x0600,
146 .skpcr_mask = SKPCR_I2SCLKEN | SKPCR_L3CLKEN,
147 .dma = true,
148 .devid = SA1111_DEVID_SAC,
149 .irq = {
150 AUDXMTDMADONEA,
151 AUDXMTDMADONEB,
152 AUDRCVDMADONEA,
153 AUDRCVDMADONEB
154 },
155 },
156 {
157 .offset = 0x0800,
158 .skpcr_mask = SKPCR_SCLKEN,
159 .devid = SA1111_DEVID_SSP,
160 },
161 {
162 .offset = SA1111_KBD,
163 .skpcr_mask = SKPCR_PTCLKEN,
164 .devid = SA1111_DEVID_PS2_KBD,
165 .irq = {
166 IRQ_TPRXINT,
167 IRQ_TPTXINT
168 },
169 },
170 {
171 .offset = SA1111_MSE,
172 .skpcr_mask = SKPCR_PMCLKEN,
173 .devid = SA1111_DEVID_PS2_MSE,
174 .irq = {
175 IRQ_MSRXINT,
176 IRQ_MSTXINT
177 },
178 },
179 {
180 .offset = 0x1800,
181 .skpcr_mask = 0,
182 .devid = SA1111_DEVID_PCMCIA,
183 .irq = {
184 IRQ_S0_READY_NINT,
185 IRQ_S0_CD_VALID,
186 IRQ_S0_BVD1_STSCHG,
187 IRQ_S1_READY_NINT,
188 IRQ_S1_CD_VALID,
189 IRQ_S1_BVD1_STSCHG,
190 },
191 },
192};
193
194/*
195 * SA1111 interrupt support. Since clearing an IRQ while there are
196 * active IRQs causes the interrupt output to pulse, the upper levels
197 * will call us again if there are more interrupts to process.
198 */
199static void
200sa1111_irq_handler(unsigned int irq, struct irq_desc *desc)
201{
202 unsigned int stat0, stat1, i;
203 struct sa1111 *sachip = irq_get_handler_data(irq);
204 void __iomem *mapbase = sachip->base + SA1111_INTC;
205
206 stat0 = sa1111_readl(mapbase + SA1111_INTSTATCLR0);
207 stat1 = sa1111_readl(mapbase + SA1111_INTSTATCLR1);
208
209 sa1111_writel(stat0, mapbase + SA1111_INTSTATCLR0);
210
211 desc->irq_data.chip->irq_ack(&desc->irq_data);
212
213 sa1111_writel(stat1, mapbase + SA1111_INTSTATCLR1);
214
215 if (stat0 == 0 && stat1 == 0) {
216 do_bad_IRQ(irq, desc);
217 return;
218 }
219
220 for (i = 0; stat0; i++, stat0 >>= 1)
221 if (stat0 & 1)
222 generic_handle_irq(i + sachip->irq_base);
223
224 for (i = 32; stat1; i++, stat1 >>= 1)
225 if (stat1 & 1)
226 generic_handle_irq(i + sachip->irq_base);
227
228 /* For level-based interrupts */
229 desc->irq_data.chip->irq_unmask(&desc->irq_data);
230}
231
232#define SA1111_IRQMASK_LO(x) (1 << (x - sachip->irq_base))
233#define SA1111_IRQMASK_HI(x) (1 << (x - sachip->irq_base - 32))
234
235static void sa1111_ack_irq(struct irq_data *d)
236{
237}
238
239static void sa1111_mask_lowirq(struct irq_data *d)
240{
241 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
242 void __iomem *mapbase = sachip->base + SA1111_INTC;
243 unsigned long ie0;
244
245 ie0 = sa1111_readl(mapbase + SA1111_INTEN0);
246 ie0 &= ~SA1111_IRQMASK_LO(d->irq);
247 writel(ie0, mapbase + SA1111_INTEN0);
248}
249
250static void sa1111_unmask_lowirq(struct irq_data *d)
251{
252 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
253 void __iomem *mapbase = sachip->base + SA1111_INTC;
254 unsigned long ie0;
255
256 ie0 = sa1111_readl(mapbase + SA1111_INTEN0);
257 ie0 |= SA1111_IRQMASK_LO(d->irq);
258 sa1111_writel(ie0, mapbase + SA1111_INTEN0);
259}
260
261/*
262 * Attempt to re-trigger the interrupt. The SA1111 contains a register
263 * (INTSET) which claims to do this. However, in practice no amount of
264 * manipulation of INTEN and INTSET guarantees that the interrupt will
265 * be triggered. In fact, its very difficult, if not impossible to get
266 * INTSET to re-trigger the interrupt.
267 */
268static int sa1111_retrigger_lowirq(struct irq_data *d)
269{
270 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
271 void __iomem *mapbase = sachip->base + SA1111_INTC;
272 unsigned int mask = SA1111_IRQMASK_LO(d->irq);
273 unsigned long ip0;
274 int i;
275
276 ip0 = sa1111_readl(mapbase + SA1111_INTPOL0);
277 for (i = 0; i < 8; i++) {
278 sa1111_writel(ip0 ^ mask, mapbase + SA1111_INTPOL0);
279 sa1111_writel(ip0, mapbase + SA1111_INTPOL0);
280 if (sa1111_readl(mapbase + SA1111_INTSTATCLR0) & mask)
281 break;
282 }
283
284 if (i == 8)
285 printk(KERN_ERR "Danger Will Robinson: failed to "
286 "re-trigger IRQ%d\n", d->irq);
287 return i == 8 ? -1 : 0;
288}
289
290static int sa1111_type_lowirq(struct irq_data *d, unsigned int flags)
291{
292 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
293 void __iomem *mapbase = sachip->base + SA1111_INTC;
294 unsigned int mask = SA1111_IRQMASK_LO(d->irq);
295 unsigned long ip0;
296
297 if (flags == IRQ_TYPE_PROBE)
298 return 0;
299
300 if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
301 return -EINVAL;
302
303 ip0 = sa1111_readl(mapbase + SA1111_INTPOL0);
304 if (flags & IRQ_TYPE_EDGE_RISING)
305 ip0 &= ~mask;
306 else
307 ip0 |= mask;
308 sa1111_writel(ip0, mapbase + SA1111_INTPOL0);
309 sa1111_writel(ip0, mapbase + SA1111_WAKEPOL0);
310
311 return 0;
312}
313
314static int sa1111_wake_lowirq(struct irq_data *d, unsigned int on)
315{
316 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
317 void __iomem *mapbase = sachip->base + SA1111_INTC;
318 unsigned int mask = SA1111_IRQMASK_LO(d->irq);
319 unsigned long we0;
320
321 we0 = sa1111_readl(mapbase + SA1111_WAKEEN0);
322 if (on)
323 we0 |= mask;
324 else
325 we0 &= ~mask;
326 sa1111_writel(we0, mapbase + SA1111_WAKEEN0);
327
328 return 0;
329}
330
331static struct irq_chip sa1111_low_chip = {
332 .name = "SA1111-l",
333 .irq_ack = sa1111_ack_irq,
334 .irq_mask = sa1111_mask_lowirq,
335 .irq_unmask = sa1111_unmask_lowirq,
336 .irq_retrigger = sa1111_retrigger_lowirq,
337 .irq_set_type = sa1111_type_lowirq,
338 .irq_set_wake = sa1111_wake_lowirq,
339};
340
341static void sa1111_mask_highirq(struct irq_data *d)
342{
343 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
344 void __iomem *mapbase = sachip->base + SA1111_INTC;
345 unsigned long ie1;
346
347 ie1 = sa1111_readl(mapbase + SA1111_INTEN1);
348 ie1 &= ~SA1111_IRQMASK_HI(d->irq);
349 sa1111_writel(ie1, mapbase + SA1111_INTEN1);
350}
351
352static void sa1111_unmask_highirq(struct irq_data *d)
353{
354 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
355 void __iomem *mapbase = sachip->base + SA1111_INTC;
356 unsigned long ie1;
357
358 ie1 = sa1111_readl(mapbase + SA1111_INTEN1);
359 ie1 |= SA1111_IRQMASK_HI(d->irq);
360 sa1111_writel(ie1, mapbase + SA1111_INTEN1);
361}
362
363/*
364 * Attempt to re-trigger the interrupt. The SA1111 contains a register
365 * (INTSET) which claims to do this. However, in practice no amount of
366 * manipulation of INTEN and INTSET guarantees that the interrupt will
367 * be triggered. In fact, its very difficult, if not impossible to get
368 * INTSET to re-trigger the interrupt.
369 */
370static int sa1111_retrigger_highirq(struct irq_data *d)
371{
372 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
373 void __iomem *mapbase = sachip->base + SA1111_INTC;
374 unsigned int mask = SA1111_IRQMASK_HI(d->irq);
375 unsigned long ip1;
376 int i;
377
378 ip1 = sa1111_readl(mapbase + SA1111_INTPOL1);
379 for (i = 0; i < 8; i++) {
380 sa1111_writel(ip1 ^ mask, mapbase + SA1111_INTPOL1);
381 sa1111_writel(ip1, mapbase + SA1111_INTPOL1);
382 if (sa1111_readl(mapbase + SA1111_INTSTATCLR1) & mask)
383 break;
384 }
385
386 if (i == 8)
387 printk(KERN_ERR "Danger Will Robinson: failed to "
388 "re-trigger IRQ%d\n", d->irq);
389 return i == 8 ? -1 : 0;
390}
391
392static int sa1111_type_highirq(struct irq_data *d, unsigned int flags)
393{
394 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
395 void __iomem *mapbase = sachip->base + SA1111_INTC;
396 unsigned int mask = SA1111_IRQMASK_HI(d->irq);
397 unsigned long ip1;
398
399 if (flags == IRQ_TYPE_PROBE)
400 return 0;
401
402 if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
403 return -EINVAL;
404
405 ip1 = sa1111_readl(mapbase + SA1111_INTPOL1);
406 if (flags & IRQ_TYPE_EDGE_RISING)
407 ip1 &= ~mask;
408 else
409 ip1 |= mask;
410 sa1111_writel(ip1, mapbase + SA1111_INTPOL1);
411 sa1111_writel(ip1, mapbase + SA1111_WAKEPOL1);
412
413 return 0;
414}
415
416static int sa1111_wake_highirq(struct irq_data *d, unsigned int on)
417{
418 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
419 void __iomem *mapbase = sachip->base + SA1111_INTC;
420 unsigned int mask = SA1111_IRQMASK_HI(d->irq);
421 unsigned long we1;
422
423 we1 = sa1111_readl(mapbase + SA1111_WAKEEN1);
424 if (on)
425 we1 |= mask;
426 else
427 we1 &= ~mask;
428 sa1111_writel(we1, mapbase + SA1111_WAKEEN1);
429
430 return 0;
431}
432
433static struct irq_chip sa1111_high_chip = {
434 .name = "SA1111-h",
435 .irq_ack = sa1111_ack_irq,
436 .irq_mask = sa1111_mask_highirq,
437 .irq_unmask = sa1111_unmask_highirq,
438 .irq_retrigger = sa1111_retrigger_highirq,
439 .irq_set_type = sa1111_type_highirq,
440 .irq_set_wake = sa1111_wake_highirq,
441};
442
443static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
444{
445 void __iomem *irqbase = sachip->base + SA1111_INTC;
446 unsigned i, irq;
447 int ret;
448
449 /*
450 * We're guaranteed that this region hasn't been taken.
451 */
452 request_mem_region(sachip->phys + SA1111_INTC, 512, "irq");
453
454 ret = irq_alloc_descs(-1, irq_base, SA1111_IRQ_NR, -1);
455 if (ret <= 0) {
456 dev_err(sachip->dev, "unable to allocate %u irqs: %d\n",
457 SA1111_IRQ_NR, ret);
458 if (ret == 0)
459 ret = -EINVAL;
460 return ret;
461 }
462
463 sachip->irq_base = ret;
464
465 /* disable all IRQs */
466 sa1111_writel(0, irqbase + SA1111_INTEN0);
467 sa1111_writel(0, irqbase + SA1111_INTEN1);
468 sa1111_writel(0, irqbase + SA1111_WAKEEN0);
469 sa1111_writel(0, irqbase + SA1111_WAKEEN1);
470
471 /*
472 * detect on rising edge. Note: Feb 2001 Errata for SA1111
473 * specifies that S0ReadyInt and S1ReadyInt should be '1'.
474 */
475 sa1111_writel(0, irqbase + SA1111_INTPOL0);
476 sa1111_writel(SA1111_IRQMASK_HI(IRQ_S0_READY_NINT) |
477 SA1111_IRQMASK_HI(IRQ_S1_READY_NINT),
478 irqbase + SA1111_INTPOL1);
479
480 /* clear all IRQs */
481 sa1111_writel(~0, irqbase + SA1111_INTSTATCLR0);
482 sa1111_writel(~0, irqbase + SA1111_INTSTATCLR1);
483
484 for (i = IRQ_GPAIN0; i <= SSPROR; i++) {
485 irq = sachip->irq_base + i;
486 irq_set_chip_and_handler(irq, &sa1111_low_chip,
487 handle_edge_irq);
488 irq_set_chip_data(irq, sachip);
489 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
490 }
491
492 for (i = AUDXMTDMADONEA; i <= IRQ_S1_BVD1_STSCHG; i++) {
493 irq = sachip->irq_base + i;
494 irq_set_chip_and_handler(irq, &sa1111_high_chip,
495 handle_edge_irq);
496 irq_set_chip_data(irq, sachip);
497 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
498 }
499
500 /*
501 * Register SA1111 interrupt
502 */
503 irq_set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING);
504 irq_set_handler_data(sachip->irq, sachip);
505 irq_set_chained_handler(sachip->irq, sa1111_irq_handler);
506
507 dev_info(sachip->dev, "Providing IRQ%u-%u\n",
508 sachip->irq_base, sachip->irq_base + SA1111_IRQ_NR - 1);
509
510 return 0;
511}
512
513/*
514 * Bring the SA1111 out of reset. This requires a set procedure:
515 * 1. nRESET asserted (by hardware)
516 * 2. CLK turned on from SA1110
517 * 3. nRESET deasserted
518 * 4. VCO turned on, PLL_BYPASS turned off
519 * 5. Wait lock time, then assert RCLKEn
520 * 7. PCR set to allow clocking of individual functions
521 *
522 * Until we've done this, the only registers we can access are:
523 * SBI_SKCR
524 * SBI_SMCR
525 * SBI_SKID
526 */
527static void sa1111_wake(struct sa1111 *sachip)
528{
529 unsigned long flags, r;
530
531 spin_lock_irqsave(&sachip->lock, flags);
532
533 clk_enable(sachip->clk);
534
535 /*
536 * Turn VCO on, and disable PLL Bypass.
537 */
538 r = sa1111_readl(sachip->base + SA1111_SKCR);
539 r &= ~SKCR_VCO_OFF;
540 sa1111_writel(r, sachip->base + SA1111_SKCR);
541 r |= SKCR_PLL_BYPASS | SKCR_OE_EN;
542 sa1111_writel(r, sachip->base + SA1111_SKCR);
543
544 /*
545 * Wait lock time. SA1111 manual _doesn't_
546 * specify a figure for this! We choose 100us.
547 */
548 udelay(100);
549
550 /*
551 * Enable RCLK. We also ensure that RDYEN is set.
552 */
553 r |= SKCR_RCLKEN | SKCR_RDYEN;
554 sa1111_writel(r, sachip->base + SA1111_SKCR);
555
556 /*
557 * Wait 14 RCLK cycles for the chip to finish coming out
558 * of reset. (RCLK=24MHz). This is 590ns.
559 */
560 udelay(1);
561
562 /*
563 * Ensure all clocks are initially off.
564 */
565 sa1111_writel(0, sachip->base + SA1111_SKPCR);
566
567 spin_unlock_irqrestore(&sachip->lock, flags);
568}
569
570#ifdef CONFIG_ARCH_SA1100
571
572static u32 sa1111_dma_mask[] = {
573 ~0,
574 ~(1 << 20),
575 ~(1 << 23),
576 ~(1 << 24),
577 ~(1 << 25),
578 ~(1 << 20),
579 ~(1 << 20),
580 0,
581};
582
583/*
584 * Configure the SA1111 shared memory controller.
585 */
586void
587sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac,
588 unsigned int cas_latency)
589{
590 unsigned int smcr = SMCR_DTIM | SMCR_MBGE | FInsrt(drac, SMCR_DRAC);
591
592 if (cas_latency == 3)
593 smcr |= SMCR_CLAT;
594
595 sa1111_writel(smcr, sachip->base + SA1111_SMCR);
596
597 /*
598 * Now clear the bits in the DMA mask to work around the SA1111
599 * DMA erratum (Intel StrongARM SA-1111 Microprocessor Companion
600 * Chip Specification Update, June 2000, Erratum #7).
601 */
602 if (sachip->dev->dma_mask)
603 *sachip->dev->dma_mask &= sa1111_dma_mask[drac >> 2];
604
605 sachip->dev->coherent_dma_mask &= sa1111_dma_mask[drac >> 2];
606}
607#endif
608
609static void sa1111_dev_release(struct device *_dev)
610{
611 struct sa1111_dev *dev = SA1111_DEV(_dev);
612
613 kfree(dev);
614}
615
616static int
617sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
618 struct sa1111_dev_info *info)
619{
620 struct sa1111_dev *dev;
621 unsigned i;
622 int ret;
623
624 dev = kzalloc(sizeof(struct sa1111_dev), GFP_KERNEL);
625 if (!dev) {
626 ret = -ENOMEM;
627 goto err_alloc;
628 }
629
630 device_initialize(&dev->dev);
631 dev_set_name(&dev->dev, "%4.4lx", info->offset);
632 dev->devid = info->devid;
633 dev->dev.parent = sachip->dev;
634 dev->dev.bus = &sa1111_bus_type;
635 dev->dev.release = sa1111_dev_release;
636 dev->res.start = sachip->phys + info->offset;
637 dev->res.end = dev->res.start + 511;
638 dev->res.name = dev_name(&dev->dev);
639 dev->res.flags = IORESOURCE_MEM;
640 dev->mapbase = sachip->base + info->offset;
641 dev->skpcr_mask = info->skpcr_mask;
642
643 for (i = 0; i < ARRAY_SIZE(info->irq); i++)
644 dev->irq[i] = sachip->irq_base + info->irq[i];
645
646 /*
647 * If the parent device has a DMA mask associated with it, and
648 * this child supports DMA, propagate it down to the children.
649 */
650 if (info->dma && sachip->dev->dma_mask) {
651 dev->dma_mask = *sachip->dev->dma_mask;
652 dev->dev.dma_mask = &dev->dma_mask;
653 dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask;
654 }
655
656 ret = request_resource(parent, &dev->res);
657 if (ret) {
658 dev_err(sachip->dev, "failed to allocate resource for %s\n",
659 dev->res.name);
660 goto err_resource;
661 }
662
663 ret = device_add(&dev->dev);
664 if (ret)
665 goto err_add;
666 return 0;
667
668 err_add:
669 release_resource(&dev->res);
670 err_resource:
671 put_device(&dev->dev);
672 err_alloc:
673 return ret;
674}
675
676/**
677 * sa1111_probe - probe for a single SA1111 chip.
678 * @phys_addr: physical address of device.
679 *
680 * Probe for a SA1111 chip. This must be called
681 * before any other SA1111-specific code.
682 *
683 * Returns:
684 * %-ENODEV device not found.
685 * %-EBUSY physical address already marked in-use.
686 * %-EINVAL no platform data passed
687 * %0 successful.
688 */
689static int __devinit
690__sa1111_probe(struct device *me, struct resource *mem, int irq)
691{
692 struct sa1111_platform_data *pd = me->platform_data;
693 struct sa1111 *sachip;
694 unsigned long id;
695 unsigned int has_devs;
696 int i, ret = -ENODEV;
697
698 if (!pd)
699 return -EINVAL;
700
701 sachip = kzalloc(sizeof(struct sa1111), GFP_KERNEL);
702 if (!sachip)
703 return -ENOMEM;
704
705 sachip->clk = clk_get(me, "SA1111_CLK");
706 if (IS_ERR(sachip->clk)) {
707 ret = PTR_ERR(sachip->clk);
708 goto err_free;
709 }
710
711 ret = clk_prepare(sachip->clk);
712 if (ret)
713 goto err_clkput;
714
715 spin_lock_init(&sachip->lock);
716
717 sachip->dev = me;
718 dev_set_drvdata(sachip->dev, sachip);
719
720 sachip->pdata = pd;
721 sachip->phys = mem->start;
722 sachip->irq = irq;
723
724 /*
725 * Map the whole region. This also maps the
726 * registers for our children.
727 */
728 sachip->base = ioremap(mem->start, PAGE_SIZE * 2);
729 if (!sachip->base) {
730 ret = -ENOMEM;
731 goto err_clk_unprep;
732 }
733
734 /*
735 * Probe for the chip. Only touch the SBI registers.
736 */
737 id = sa1111_readl(sachip->base + SA1111_SKID);
738 if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
739 printk(KERN_DEBUG "SA1111 not detected: ID = %08lx\n", id);
740 ret = -ENODEV;
741 goto err_unmap;
742 }
743
744 printk(KERN_INFO "SA1111 Microprocessor Companion Chip: "
745 "silicon revision %lx, metal revision %lx\n",
746 (id & SKID_SIREV_MASK)>>4, (id & SKID_MTREV_MASK));
747
748 /*
749 * We found it. Wake the chip up, and initialise.
750 */
751 sa1111_wake(sachip);
752
753 /*
754 * The interrupt controller must be initialised before any
755 * other device to ensure that the interrupts are available.
756 */
757 if (sachip->irq != NO_IRQ) {
758 ret = sa1111_setup_irq(sachip, pd->irq_base);
759 if (ret)
760 goto err_unmap;
761 }
762
763#ifdef CONFIG_ARCH_SA1100
764 {
765 unsigned int val;
766
767 /*
768 * The SDRAM configuration of the SA1110 and the SA1111 must
769 * match. This is very important to ensure that SA1111 accesses
770 * don't corrupt the SDRAM. Note that this ungates the SA1111's
771 * MBGNT signal, so we must have called sa1110_mb_disable()
772 * beforehand.
773 */
774 sa1111_configure_smc(sachip, 1,
775 FExtr(MDCNFG, MDCNFG_SA1110_DRAC0),
776 FExtr(MDCNFG, MDCNFG_SA1110_TDL0));
777
778 /*
779 * We only need to turn on DCLK whenever we want to use the
780 * DMA. It can otherwise be held firmly in the off position.
781 * (currently, we always enable it.)
782 */
783 val = sa1111_readl(sachip->base + SA1111_SKPCR);
784 sa1111_writel(val | SKPCR_DCLKEN, sachip->base + SA1111_SKPCR);
785
786 /*
787 * Enable the SA1110 memory bus request and grant signals.
788 */
789 sa1110_mb_enable();
790 }
791#endif
792
793 g_sa1111 = sachip;
794
795 has_devs = ~0;
796 if (pd)
797 has_devs &= ~pd->disable_devs;
798
799 for (i = 0; i < ARRAY_SIZE(sa1111_devices); i++)
800 if (sa1111_devices[i].devid & has_devs)
801 sa1111_init_one_child(sachip, mem, &sa1111_devices[i]);
802
803 return 0;
804
805 err_unmap:
806 iounmap(sachip->base);
807 err_clk_unprep:
808 clk_unprepare(sachip->clk);
809 err_clkput:
810 clk_put(sachip->clk);
811 err_free:
812 kfree(sachip);
813 return ret;
814}
815
816static int sa1111_remove_one(struct device *dev, void *data)
817{
818 struct sa1111_dev *sadev = SA1111_DEV(dev);
819 device_del(&sadev->dev);
820 release_resource(&sadev->res);
821 put_device(&sadev->dev);
822 return 0;
823}
824
825static void __sa1111_remove(struct sa1111 *sachip)
826{
827 void __iomem *irqbase = sachip->base + SA1111_INTC;
828
829 device_for_each_child(sachip->dev, NULL, sa1111_remove_one);
830
831 /* disable all IRQs */
832 sa1111_writel(0, irqbase + SA1111_INTEN0);
833 sa1111_writel(0, irqbase + SA1111_INTEN1);
834 sa1111_writel(0, irqbase + SA1111_WAKEEN0);
835 sa1111_writel(0, irqbase + SA1111_WAKEEN1);
836
837 clk_disable(sachip->clk);
838 clk_unprepare(sachip->clk);
839
840 if (sachip->irq != NO_IRQ) {
841 irq_set_chained_handler(sachip->irq, NULL);
842 irq_set_handler_data(sachip->irq, NULL);
843 irq_free_descs(sachip->irq_base, SA1111_IRQ_NR);
844
845 release_mem_region(sachip->phys + SA1111_INTC, 512);
846 }
847
848 iounmap(sachip->base);
849 clk_put(sachip->clk);
850 kfree(sachip);
851}
852
853struct sa1111_save_data {
854 unsigned int skcr;
855 unsigned int skpcr;
856 unsigned int skcdr;
857 unsigned char skaud;
858 unsigned char skpwm0;
859 unsigned char skpwm1;
860
861 /*
862 * Interrupt controller
863 */
864 unsigned int intpol0;
865 unsigned int intpol1;
866 unsigned int inten0;
867 unsigned int inten1;
868 unsigned int wakepol0;
869 unsigned int wakepol1;
870 unsigned int wakeen0;
871 unsigned int wakeen1;
872};
873
874#ifdef CONFIG_PM
875
876static int sa1111_suspend(struct platform_device *dev, pm_message_t state)
877{
878 struct sa1111 *sachip = platform_get_drvdata(dev);
879 struct sa1111_save_data *save;
880 unsigned long flags;
881 unsigned int val;
882 void __iomem *base;
883
884 save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL);
885 if (!save)
886 return -ENOMEM;
887 sachip->saved_state = save;
888
889 spin_lock_irqsave(&sachip->lock, flags);
890
891 /*
892 * Save state.
893 */
894 base = sachip->base;
895 save->skcr = sa1111_readl(base + SA1111_SKCR);
896 save->skpcr = sa1111_readl(base + SA1111_SKPCR);
897 save->skcdr = sa1111_readl(base + SA1111_SKCDR);
898 save->skaud = sa1111_readl(base + SA1111_SKAUD);
899 save->skpwm0 = sa1111_readl(base + SA1111_SKPWM0);
900 save->skpwm1 = sa1111_readl(base + SA1111_SKPWM1);
901
902 sa1111_writel(0, sachip->base + SA1111_SKPWM0);
903 sa1111_writel(0, sachip->base + SA1111_SKPWM1);
904
905 base = sachip->base + SA1111_INTC;
906 save->intpol0 = sa1111_readl(base + SA1111_INTPOL0);
907 save->intpol1 = sa1111_readl(base + SA1111_INTPOL1);
908 save->inten0 = sa1111_readl(base + SA1111_INTEN0);
909 save->inten1 = sa1111_readl(base + SA1111_INTEN1);
910 save->wakepol0 = sa1111_readl(base + SA1111_WAKEPOL0);
911 save->wakepol1 = sa1111_readl(base + SA1111_WAKEPOL1);
912 save->wakeen0 = sa1111_readl(base + SA1111_WAKEEN0);
913 save->wakeen1 = sa1111_readl(base + SA1111_WAKEEN1);
914
915 /*
916 * Disable.
917 */
918 val = sa1111_readl(sachip->base + SA1111_SKCR);
919 sa1111_writel(val | SKCR_SLEEP, sachip->base + SA1111_SKCR);
920
921 clk_disable(sachip->clk);
922
923 spin_unlock_irqrestore(&sachip->lock, flags);
924
925#ifdef CONFIG_ARCH_SA1100
926 sa1110_mb_disable();
927#endif
928
929 return 0;
930}
931
932/*
933 * sa1111_resume - Restore the SA1111 device state.
934 * @dev: device to restore
935 *
936 * Restore the general state of the SA1111; clock control and
937 * interrupt controller. Other parts of the SA1111 must be
938 * restored by their respective drivers, and must be called
939 * via LDM after this function.
940 */
941static int sa1111_resume(struct platform_device *dev)
942{
943 struct sa1111 *sachip = platform_get_drvdata(dev);
944 struct sa1111_save_data *save;
945 unsigned long flags, id;
946 void __iomem *base;
947
948 save = sachip->saved_state;
949 if (!save)
950 return 0;
951
952 /*
953 * Ensure that the SA1111 is still here.
954 * FIXME: shouldn't do this here.
955 */
956 id = sa1111_readl(sachip->base + SA1111_SKID);
957 if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
958 __sa1111_remove(sachip);
959 platform_set_drvdata(dev, NULL);
960 kfree(save);
961 return 0;
962 }
963
964 /*
965 * First of all, wake up the chip.
966 */
967 sa1111_wake(sachip);
968
969#ifdef CONFIG_ARCH_SA1100
970 /* Enable the memory bus request/grant signals */
971 sa1110_mb_enable();
972#endif
973
974 /*
975 * Only lock for write ops. Also, sa1111_wake must be called with
976 * released spinlock!
977 */
978 spin_lock_irqsave(&sachip->lock, flags);
979
980 sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN0);
981 sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN1);
982
983 base = sachip->base;
984 sa1111_writel(save->skcr, base + SA1111_SKCR);
985 sa1111_writel(save->skpcr, base + SA1111_SKPCR);
986 sa1111_writel(save->skcdr, base + SA1111_SKCDR);
987 sa1111_writel(save->skaud, base + SA1111_SKAUD);
988 sa1111_writel(save->skpwm0, base + SA1111_SKPWM0);
989 sa1111_writel(save->skpwm1, base + SA1111_SKPWM1);
990
991 base = sachip->base + SA1111_INTC;
992 sa1111_writel(save->intpol0, base + SA1111_INTPOL0);
993 sa1111_writel(save->intpol1, base + SA1111_INTPOL1);
994 sa1111_writel(save->inten0, base + SA1111_INTEN0);
995 sa1111_writel(save->inten1, base + SA1111_INTEN1);
996 sa1111_writel(save->wakepol0, base + SA1111_WAKEPOL0);
997 sa1111_writel(save->wakepol1, base + SA1111_WAKEPOL1);
998 sa1111_writel(save->wakeen0, base + SA1111_WAKEEN0);
999 sa1111_writel(save->wakeen1, base + SA1111_WAKEEN1);
1000
1001 spin_unlock_irqrestore(&sachip->lock, flags);
1002
1003 sachip->saved_state = NULL;
1004 kfree(save);
1005
1006 return 0;
1007}
1008
1009#else
1010#define sa1111_suspend NULL
1011#define sa1111_resume NULL
1012#endif
1013
1014static int __devinit sa1111_probe(struct platform_device *pdev)
1015{
1016 struct resource *mem;
1017 int irq;
1018
1019 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1020 if (!mem)
1021 return -EINVAL;
1022 irq = platform_get_irq(pdev, 0);
1023 if (irq < 0)
1024 return -ENXIO;
1025
1026 return __sa1111_probe(&pdev->dev, mem, irq);
1027}
1028
1029static int sa1111_remove(struct platform_device *pdev)
1030{
1031 struct sa1111 *sachip = platform_get_drvdata(pdev);
1032
1033 if (sachip) {
1034#ifdef CONFIG_PM
1035 kfree(sachip->saved_state);
1036 sachip->saved_state = NULL;
1037#endif
1038 __sa1111_remove(sachip);
1039 platform_set_drvdata(pdev, NULL);
1040 }
1041
1042 return 0;
1043}
1044
1045/*
1046 * Not sure if this should be on the system bus or not yet.
1047 * We really want some way to register a system device at
1048 * the per-machine level, and then have this driver pick
1049 * up the registered devices.
1050 *
1051 * We also need to handle the SDRAM configuration for
1052 * PXA250/SA1110 machine classes.
1053 */
1054static struct platform_driver sa1111_device_driver = {
1055 .probe = sa1111_probe,
1056 .remove = sa1111_remove,
1057 .suspend = sa1111_suspend,
1058 .resume = sa1111_resume,
1059 .driver = {
1060 .name = "sa1111",
1061 .owner = THIS_MODULE,
1062 },
1063};
1064
1065/*
1066 * Get the parent device driver (us) structure
1067 * from a child function device
1068 */
1069static inline struct sa1111 *sa1111_chip_driver(struct sa1111_dev *sadev)
1070{
1071 return (struct sa1111 *)dev_get_drvdata(sadev->dev.parent);
1072}
1073
1074/*
1075 * The bits in the opdiv field are non-linear.
1076 */
1077static unsigned char opdiv_table[] = { 1, 4, 2, 8 };
1078
1079static unsigned int __sa1111_pll_clock(struct sa1111 *sachip)
1080{
1081 unsigned int skcdr, fbdiv, ipdiv, opdiv;
1082
1083 skcdr = sa1111_readl(sachip->base + SA1111_SKCDR);
1084
1085 fbdiv = (skcdr & 0x007f) + 2;
1086 ipdiv = ((skcdr & 0x0f80) >> 7) + 2;
1087 opdiv = opdiv_table[(skcdr & 0x3000) >> 12];
1088
1089 return 3686400 * fbdiv / (ipdiv * opdiv);
1090}
1091
1092/**
1093 * sa1111_pll_clock - return the current PLL clock frequency.
1094 * @sadev: SA1111 function block
1095 *
1096 * BUG: we should look at SKCR. We also blindly believe that
1097 * the chip is being fed with the 3.6864MHz clock.
1098 *
1099 * Returns the PLL clock in Hz.
1100 */
1101unsigned int sa1111_pll_clock(struct sa1111_dev *sadev)
1102{
1103 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1104
1105 return __sa1111_pll_clock(sachip);
1106}
1107EXPORT_SYMBOL(sa1111_pll_clock);
1108
1109/**
1110 * sa1111_select_audio_mode - select I2S or AC link mode
1111 * @sadev: SA1111 function block
1112 * @mode: One of %SA1111_AUDIO_ACLINK or %SA1111_AUDIO_I2S
1113 *
1114 * Frob the SKCR to select AC Link mode or I2S mode for
1115 * the audio block.
1116 */
1117void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode)
1118{
1119 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1120 unsigned long flags;
1121 unsigned int val;
1122
1123 spin_lock_irqsave(&sachip->lock, flags);
1124
1125 val = sa1111_readl(sachip->base + SA1111_SKCR);
1126 if (mode == SA1111_AUDIO_I2S) {
1127 val &= ~SKCR_SELAC;
1128 } else {
1129 val |= SKCR_SELAC;
1130 }
1131 sa1111_writel(val, sachip->base + SA1111_SKCR);
1132
1133 spin_unlock_irqrestore(&sachip->lock, flags);
1134}
1135EXPORT_SYMBOL(sa1111_select_audio_mode);
1136
1137/**
1138 * sa1111_set_audio_rate - set the audio sample rate
1139 * @sadev: SA1111 SAC function block
1140 * @rate: sample rate to select
1141 */
1142int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate)
1143{
1144 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1145 unsigned int div;
1146
1147 if (sadev->devid != SA1111_DEVID_SAC)
1148 return -EINVAL;
1149
1150 div = (__sa1111_pll_clock(sachip) / 256 + rate / 2) / rate;
1151 if (div == 0)
1152 div = 1;
1153 if (div > 128)
1154 div = 128;
1155
1156 sa1111_writel(div - 1, sachip->base + SA1111_SKAUD);
1157
1158 return 0;
1159}
1160EXPORT_SYMBOL(sa1111_set_audio_rate);
1161
1162/**
1163 * sa1111_get_audio_rate - get the audio sample rate
1164 * @sadev: SA1111 SAC function block device
1165 */
1166int sa1111_get_audio_rate(struct sa1111_dev *sadev)
1167{
1168 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1169 unsigned long div;
1170
1171 if (sadev->devid != SA1111_DEVID_SAC)
1172 return -EINVAL;
1173
1174 div = sa1111_readl(sachip->base + SA1111_SKAUD) + 1;
1175
1176 return __sa1111_pll_clock(sachip) / (256 * div);
1177}
1178EXPORT_SYMBOL(sa1111_get_audio_rate);
1179
1180void sa1111_set_io_dir(struct sa1111_dev *sadev,
1181 unsigned int bits, unsigned int dir,
1182 unsigned int sleep_dir)
1183{
1184 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1185 unsigned long flags;
1186 unsigned int val;
1187 void __iomem *gpio = sachip->base + SA1111_GPIO;
1188
1189#define MODIFY_BITS(port, mask, dir) \
1190 if (mask) { \
1191 val = sa1111_readl(port); \
1192 val &= ~(mask); \
1193 val |= (dir) & (mask); \
1194 sa1111_writel(val, port); \
1195 }
1196
1197 spin_lock_irqsave(&sachip->lock, flags);
1198 MODIFY_BITS(gpio + SA1111_GPIO_PADDR, bits & 15, dir);
1199 MODIFY_BITS(gpio + SA1111_GPIO_PBDDR, (bits >> 8) & 255, dir >> 8);
1200 MODIFY_BITS(gpio + SA1111_GPIO_PCDDR, (bits >> 16) & 255, dir >> 16);
1201
1202 MODIFY_BITS(gpio + SA1111_GPIO_PASDR, bits & 15, sleep_dir);
1203 MODIFY_BITS(gpio + SA1111_GPIO_PBSDR, (bits >> 8) & 255, sleep_dir >> 8);
1204 MODIFY_BITS(gpio + SA1111_GPIO_PCSDR, (bits >> 16) & 255, sleep_dir >> 16);
1205 spin_unlock_irqrestore(&sachip->lock, flags);
1206}
1207EXPORT_SYMBOL(sa1111_set_io_dir);
1208
1209void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
1210{
1211 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1212 unsigned long flags;
1213 unsigned int val;
1214 void __iomem *gpio = sachip->base + SA1111_GPIO;
1215
1216 spin_lock_irqsave(&sachip->lock, flags);
1217 MODIFY_BITS(gpio + SA1111_GPIO_PADWR, bits & 15, v);
1218 MODIFY_BITS(gpio + SA1111_GPIO_PBDWR, (bits >> 8) & 255, v >> 8);
1219 MODIFY_BITS(gpio + SA1111_GPIO_PCDWR, (bits >> 16) & 255, v >> 16);
1220 spin_unlock_irqrestore(&sachip->lock, flags);
1221}
1222EXPORT_SYMBOL(sa1111_set_io);
1223
1224void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
1225{
1226 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1227 unsigned long flags;
1228 unsigned int val;
1229 void __iomem *gpio = sachip->base + SA1111_GPIO;
1230
1231 spin_lock_irqsave(&sachip->lock, flags);
1232 MODIFY_BITS(gpio + SA1111_GPIO_PASSR, bits & 15, v);
1233 MODIFY_BITS(gpio + SA1111_GPIO_PBSSR, (bits >> 8) & 255, v >> 8);
1234 MODIFY_BITS(gpio + SA1111_GPIO_PCSSR, (bits >> 16) & 255, v >> 16);
1235 spin_unlock_irqrestore(&sachip->lock, flags);
1236}
1237EXPORT_SYMBOL(sa1111_set_sleep_io);
1238
1239/*
1240 * Individual device operations.
1241 */
1242
1243/**
1244 * sa1111_enable_device - enable an on-chip SA1111 function block
1245 * @sadev: SA1111 function block device to enable
1246 */
1247int sa1111_enable_device(struct sa1111_dev *sadev)
1248{
1249 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1250 unsigned long flags;
1251 unsigned int val;
1252 int ret = 0;
1253
1254 if (sachip->pdata && sachip->pdata->enable)
1255 ret = sachip->pdata->enable(sachip->pdata->data, sadev->devid);
1256
1257 if (ret == 0) {
1258 spin_lock_irqsave(&sachip->lock, flags);
1259 val = sa1111_readl(sachip->base + SA1111_SKPCR);
1260 sa1111_writel(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
1261 spin_unlock_irqrestore(&sachip->lock, flags);
1262 }
1263 return ret;
1264}
1265EXPORT_SYMBOL(sa1111_enable_device);
1266
1267/**
1268 * sa1111_disable_device - disable an on-chip SA1111 function block
1269 * @sadev: SA1111 function block device to disable
1270 */
1271void sa1111_disable_device(struct sa1111_dev *sadev)
1272{
1273 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1274 unsigned long flags;
1275 unsigned int val;
1276
1277 spin_lock_irqsave(&sachip->lock, flags);
1278 val = sa1111_readl(sachip->base + SA1111_SKPCR);
1279 sa1111_writel(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
1280 spin_unlock_irqrestore(&sachip->lock, flags);
1281
1282 if (sachip->pdata && sachip->pdata->disable)
1283 sachip->pdata->disable(sachip->pdata->data, sadev->devid);
1284}
1285EXPORT_SYMBOL(sa1111_disable_device);
1286
1287/*
1288 * SA1111 "Register Access Bus."
1289 *
1290 * We model this as a regular bus type, and hang devices directly
1291 * off this.
1292 */
1293static int sa1111_match(struct device *_dev, struct device_driver *_drv)
1294{
1295 struct sa1111_dev *dev = SA1111_DEV(_dev);
1296 struct sa1111_driver *drv = SA1111_DRV(_drv);
1297
1298 return dev->devid & drv->devid;
1299}
1300
1301static int sa1111_bus_suspend(struct device *dev, pm_message_t state)
1302{
1303 struct sa1111_dev *sadev = SA1111_DEV(dev);
1304 struct sa1111_driver *drv = SA1111_DRV(dev->driver);
1305 int ret = 0;
1306
1307 if (drv && drv->suspend)
1308 ret = drv->suspend(sadev, state);
1309 return ret;
1310}
1311
1312static int sa1111_bus_resume(struct device *dev)
1313{
1314 struct sa1111_dev *sadev = SA1111_DEV(dev);
1315 struct sa1111_driver *drv = SA1111_DRV(dev->driver);
1316 int ret = 0;
1317
1318 if (drv && drv->resume)
1319 ret = drv->resume(sadev);
1320 return ret;
1321}
1322
1323static void sa1111_bus_shutdown(struct device *dev)
1324{
1325 struct sa1111_driver *drv = SA1111_DRV(dev->driver);
1326
1327 if (drv && drv->shutdown)
1328 drv->shutdown(SA1111_DEV(dev));
1329}
1330
1331static int sa1111_bus_probe(struct device *dev)
1332{
1333 struct sa1111_dev *sadev = SA1111_DEV(dev);
1334 struct sa1111_driver *drv = SA1111_DRV(dev->driver);
1335 int ret = -ENODEV;
1336
1337 if (drv->probe)
1338 ret = drv->probe(sadev);
1339 return ret;
1340}
1341
1342static int sa1111_bus_remove(struct device *dev)
1343{
1344 struct sa1111_dev *sadev = SA1111_DEV(dev);
1345 struct sa1111_driver *drv = SA1111_DRV(dev->driver);
1346 int ret = 0;
1347
1348 if (drv->remove)
1349 ret = drv->remove(sadev);
1350 return ret;
1351}
1352
1353struct bus_type sa1111_bus_type = {
1354 .name = "sa1111-rab",
1355 .match = sa1111_match,
1356 .probe = sa1111_bus_probe,
1357 .remove = sa1111_bus_remove,
1358 .suspend = sa1111_bus_suspend,
1359 .resume = sa1111_bus_resume,
1360 .shutdown = sa1111_bus_shutdown,
1361};
1362EXPORT_SYMBOL(sa1111_bus_type);
1363
1364int sa1111_driver_register(struct sa1111_driver *driver)
1365{
1366 driver->drv.bus = &sa1111_bus_type;
1367 return driver_register(&driver->drv);
1368}
1369EXPORT_SYMBOL(sa1111_driver_register);
1370
1371void sa1111_driver_unregister(struct sa1111_driver *driver)
1372{
1373 driver_unregister(&driver->drv);
1374}
1375EXPORT_SYMBOL(sa1111_driver_unregister);
1376
1377#ifdef CONFIG_DMABOUNCE
1378/*
1379 * According to the "Intel StrongARM SA-1111 Microprocessor Companion
1380 * Chip Specification Update" (June 2000), erratum #7, there is a
1381 * significant bug in the SA1111 SDRAM shared memory controller. If
1382 * an access to a region of memory above 1MB relative to the bank base,
1383 * it is important that address bit 10 _NOT_ be asserted. Depending
1384 * on the configuration of the RAM, bit 10 may correspond to one
1385 * of several different (processor-relative) address bits.
1386 *
1387 * This routine only identifies whether or not a given DMA address
1388 * is susceptible to the bug.
1389 *
1390 * This should only get called for sa1111_device types due to the
1391 * way we configure our device dma_masks.
1392 */
1393static int sa1111_needs_bounce(struct device *dev, dma_addr_t addr, size_t size)
1394{
1395 /*
1396 * Section 4.6 of the "Intel StrongARM SA-1111 Development Module
1397 * User's Guide" mentions that jumpers R51 and R52 control the
1398 * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or
1399 * SDRAM bank 1 on Neponset). The default configuration selects
1400 * Assabet, so any address in bank 1 is necessarily invalid.
1401 */
1402 return (machine_is_assabet() || machine_is_pfs168()) &&
1403 (addr >= 0xc8000000 || (addr + size) >= 0xc8000000);
1404}
1405
1406static int sa1111_notifier_call(struct notifier_block *n, unsigned long action,
1407 void *data)
1408{
1409 struct sa1111_dev *dev = SA1111_DEV(data);
1410
1411 switch (action) {
1412 case BUS_NOTIFY_ADD_DEVICE:
1413 if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL) {
1414 int ret = dmabounce_register_dev(&dev->dev, 1024, 4096,
1415 sa1111_needs_bounce);
1416 if (ret)
1417 dev_err(&dev->dev, "failed to register with dmabounce: %d\n", ret);
1418 }
1419 break;
1420
1421 case BUS_NOTIFY_DEL_DEVICE:
1422 if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL)
1423 dmabounce_unregister_dev(&dev->dev);
1424 break;
1425 }
1426 return NOTIFY_OK;
1427}
1428
1429static struct notifier_block sa1111_bus_notifier = {
1430 .notifier_call = sa1111_notifier_call,
1431};
1432#endif
1433
1434static int __init sa1111_init(void)
1435{
1436 int ret = bus_register(&sa1111_bus_type);
1437#ifdef CONFIG_DMABOUNCE
1438 if (ret == 0)
1439 bus_register_notifier(&sa1111_bus_type, &sa1111_bus_notifier);
1440#endif
1441 if (ret == 0)
1442 platform_driver_register(&sa1111_device_driver);
1443 return ret;
1444}
1445
1446static void __exit sa1111_exit(void)
1447{
1448 platform_driver_unregister(&sa1111_device_driver);
1449#ifdef CONFIG_DMABOUNCE
1450 bus_unregister_notifier(&sa1111_bus_type, &sa1111_bus_notifier);
1451#endif
1452 bus_unregister(&sa1111_bus_type);
1453}
1454
1455subsys_initcall(sa1111_init);
1456module_exit(sa1111_exit);
1457
1458MODULE_DESCRIPTION("Intel Corporation SA1111 core driver");
1459MODULE_LICENSE("GPL");