1/*
   2 * Copyright © 2006 Keith Packard
   3 * Copyright © 2007-2008 Dave Airlie
   4 * Copyright © 2007-2008 Intel Corporation
   5 *   Jesse Barnes <jesse.barnes@intel.com>
   6 *
   7 * Permission is hereby granted, free of charge, to any person obtaining a
   8 * copy of this software and associated documentation files (the "Software"),
   9 * to deal in the Software without restriction, including without limitation
  10 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
  11 * and/or sell copies of the Software, and to permit persons to whom the
  12 * Software is furnished to do so, subject to the following conditions:
  13 *
  14 * The above copyright notice and this permission notice shall be included in
  15 * all copies or substantial portions of the Software.
  16 *
  17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  20 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
  21 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
  22 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  23 * OTHER DEALINGS IN THE SOFTWARE.
  24 */
  25#ifndef __DRM_CRTC_H__
  26#define __DRM_CRTC_H__
  27
 
  28#include <linux/spinlock.h>
  29#include <linux/types.h>
  30#include <drm/drm_modeset_lock.h>
  31#include <drm/drm_mode_object.h>
  32#include <drm/drm_modes.h>
  33#include <drm/drm_device.h>
  34#include <drm/drm_plane.h>
  35#include <drm/drm_debugfs_crc.h>
  36#include <drm/drm_mode_config.h>
  37
  38struct drm_connector;
  39struct drm_device;
  40struct drm_framebuffer;
  41struct drm_mode_set;
  42struct drm_file;
  43struct drm_printer;
  44struct drm_self_refresh_data;
  45struct device_node;
  46struct edid;
  47
  48static inline int64_t U642I64(uint64_t val)
  49{
  50	return (int64_t)*((int64_t *)&val);
  51}
  52static inline uint64_t I642U64(int64_t val)
  53{
  54	return (uint64_t)*((uint64_t *)&val);
  55}
  56
  57struct drm_crtc;
  58struct drm_pending_vblank_event;
  59struct drm_plane;
  60struct drm_bridge;
  61struct drm_atomic_state;
  62
  63struct drm_crtc_helper_funcs;
  64struct drm_plane_helper_funcs;
 
 
 
 
 
 
 
 
 
 
 
 
  65
  66/**
  67 * struct drm_crtc_state - mutable CRTC state
  68 *
  69 * Note that the distinction between @enable and @active is rather subtle:
  70 * Flipping @active while @enable is set without changing anything else may
  71 * never return in a failure from the &drm_mode_config_funcs.atomic_check
  72 * callback. Userspace assumes that a DPMS On will always succeed. In other
  73 * words: @enable controls resource assignment, @active controls the actual
  74 * hardware state.
  75 *
  76 * The three booleans active_changed, connectors_changed and mode_changed are
  77 * intended to indicate whether a full modeset is needed, rather than strictly
  78 * describing what has changed in a commit. See also:
  79 * drm_atomic_crtc_needs_modeset()
  80 */
  81struct drm_crtc_state {
  82	/** @crtc: backpointer to the CRTC */
  83	struct drm_crtc *crtc;
  84
  85	/**
  86	 * @enable: Whether the CRTC should be enabled, gates all other state.
  87	 * This controls reservations of shared resources. Actual hardware state
  88	 * is controlled by @active.
  89	 */
  90	bool enable;
 
  91
  92	/**
  93	 * @active: Whether the CRTC is actively displaying (used for DPMS).
  94	 * Implies that @enable is set. The driver must not release any shared
  95	 * resources if @active is set to false but @enable still true, because
  96	 * userspace expects that a DPMS ON always succeeds.
  97	 *
  98	 * Hence drivers must not consult @active in their various
  99	 * &drm_mode_config_funcs.atomic_check callback to reject an atomic
 100	 * commit. They can consult it to aid in the computation of derived
 101	 * hardware state, since even in the DPMS OFF state the display hardware
 102	 * should be as much powered down as when the CRTC is completely
 103	 * disabled through setting @enable to false.
 104	 */
 105	bool active;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 106
 107	/**
 108	 * @planes_changed: Planes on this crtc are updated. Used by the atomic
 109	 * helpers and drivers to steer the atomic commit control flow.
 110	 */
 111	bool planes_changed : 1;
 112
 113	/**
 114	 * @mode_changed: @mode or @enable has been changed. Used by the atomic
 115	 * helpers and drivers to steer the atomic commit control flow. See also
 116	 * drm_atomic_crtc_needs_modeset().
 117	 *
 118	 * Drivers are supposed to set this for any CRTC state changes that
 119	 * require a full modeset. They can also reset it to false if e.g. a
 120	 * @mode change can be done without a full modeset by only changing
 121	 * scaler settings.
 122	 */
 123	bool mode_changed : 1;
 124
 125	/**
 126	 * @active_changed: @active has been toggled. Used by the atomic
 127	 * helpers and drivers to steer the atomic commit control flow. See also
 128	 * drm_atomic_crtc_needs_modeset().
 129	 */
 130	bool active_changed : 1;
 131
 132	/**
 133	 * @connectors_changed: Connectors to this crtc have been updated,
 134	 * either in their state or routing. Used by the atomic
 135	 * helpers and drivers to steer the atomic commit control flow. See also
 136	 * drm_atomic_crtc_needs_modeset().
 137	 *
 138	 * Drivers are supposed to set this as-needed from their own atomic
 139	 * check code, e.g. from &drm_encoder_helper_funcs.atomic_check
 140	 */
 141	bool connectors_changed : 1;
 142	/**
 143	 * @zpos_changed: zpos values of planes on this crtc have been updated.
 144	 * Used by the atomic helpers and drivers to steer the atomic commit
 145	 * control flow.
 146	 */
 147	bool zpos_changed : 1;
 148	/**
 149	 * @color_mgmt_changed: Color management properties have changed
 150	 * (@gamma_lut, @degamma_lut or @ctm). Used by the atomic helpers and
 151	 * drivers to steer the atomic commit control flow.
 152	 */
 153	bool color_mgmt_changed : 1;
 154
 155	/**
 156	 * @no_vblank:
 157	 *
 158	 * Reflects the ability of a CRTC to send VBLANK events. This state
 159	 * usually depends on the pipeline configuration. If set to true, DRM
 160	 * atomic helpers will send out a fake VBLANK event during display
 161	 * updates after all hardware changes have been committed. This is
 162	 * implemented in drm_atomic_helper_fake_vblank().
 163	 *
 164	 * One usage is for drivers and/or hardware without support for VBLANK
 165	 * interrupts. Such drivers typically do not initialize vblanking
 166	 * (i.e., call drm_vblank_init() with the number of CRTCs). For CRTCs
 167	 * without initialized vblanking, this field is set to true in
 168	 * drm_atomic_helper_check_modeset(), and a fake VBLANK event will be
 169	 * send out on each update of the display pipeline by
 170	 * drm_atomic_helper_fake_vblank().
 171	 *
 172	 * Another usage is CRTCs feeding a writeback connector operating in
 173	 * oneshot mode. In this case the fake VBLANK event is only generated
 174	 * when a job is queued to the writeback connector, and we want the
 175	 * core to fake VBLANK events when this part of the pipeline hasn't
 176	 * changed but others had or when the CRTC and connectors are being
 177	 * disabled.
 178	 *
 179	 * __drm_atomic_helper_crtc_duplicate_state() will not reset the value
 180	 * from the current state, the CRTC driver is then responsible for
 181	 * updating this field when needed.
 182	 *
 183	 * Note that the combination of &drm_crtc_state.event == NULL and
 184	 * &drm_crtc_state.no_blank == true is valid and usually used when the
 185	 * writeback connector attached to the CRTC has a new job queued. In
 186	 * this case the driver will send the VBLANK event on its own when the
 187	 * writeback job is complete.
 188	 */
 189	bool no_vblank : 1;
 190
 191	/**
 192	 * @plane_mask: Bitmask of drm_plane_mask(plane) of planes attached to
 193	 * this CRTC.
 194	 */
 195	u32 plane_mask;
 196
 197	/**
 198	 * @connector_mask: Bitmask of drm_connector_mask(connector) of
 199	 * connectors attached to this CRTC.
 200	 */
 201	u32 connector_mask;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 202
 203	/**
 204	 * @encoder_mask: Bitmask of drm_encoder_mask(encoder) of encoders
 205	 * attached to this CRTC.
 206	 */
 207	u32 encoder_mask;
 208
 209	/**
 210	 * @adjusted_mode:
 211	 *
 212	 * Internal display timings which can be used by the driver to handle
 213	 * differences between the mode requested by userspace in @mode and what
 214	 * is actually programmed into the hardware.
 215	 *
 216	 * For drivers using &drm_bridge, this stores hardware display timings
 217	 * used between the CRTC and the first bridge. For other drivers, the
 218	 * meaning of the adjusted_mode field is purely driver implementation
 219	 * defined information, and will usually be used to store the hardware
 220	 * display timings used between the CRTC and encoder blocks.
 221	 */
 222	struct drm_display_mode adjusted_mode;
 223
 224	/**
 225	 * @mode:
 226	 *
 227	 * Display timings requested by userspace. The driver should try to
 228	 * match the refresh rate as close as possible (but note that it's
 229	 * undefined what exactly is close enough, e.g. some of the HDMI modes
 230	 * only differ in less than 1% of the refresh rate). The active width
 231	 * and height as observed by userspace for positioning planes must match
 232	 * exactly.
 233	 *
 234	 * For external connectors where the sink isn't fixed (like with a
 235	 * built-in panel), this mode here should match the physical mode on the
 236	 * wire to the last details (i.e. including sync polarities and
 237	 * everything).
 238	 */
 239	struct drm_display_mode mode;
 240
 241	/**
 242	 * @mode_blob: &drm_property_blob for @mode, for exposing the mode to
 243	 * atomic userspace.
 244	 */
 245	struct drm_property_blob *mode_blob;
 
 
 
 246
 247	/**
 248	 * @degamma_lut:
 249	 *
 250	 * Lookup table for converting framebuffer pixel data before apply the
 251	 * color conversion matrix @ctm. See drm_crtc_enable_color_mgmt(). The
 252	 * blob (if not NULL) is an array of &struct drm_color_lut.
 253	 */
 254	struct drm_property_blob *degamma_lut;
 255
 256	/**
 257	 * @ctm:
 258	 *
 259	 * Color transformation matrix. See drm_crtc_enable_color_mgmt(). The
 260	 * blob (if not NULL) is a &struct drm_color_ctm.
 261	 */
 262	struct drm_property_blob *ctm;
 263
 264	/**
 265	 * @gamma_lut:
 266	 *
 267	 * Lookup table for converting pixel data after the color conversion
 268	 * matrix @ctm.  See drm_crtc_enable_color_mgmt(). The blob (if not
 269	 * NULL) is an array of &struct drm_color_lut.
 270	 *
 271	 * Note that for mostly historical reasons stemming from Xorg heritage,
 272	 * this is also used to store the color map (also sometimes color lut,
 273	 * CLUT or color palette) for indexed formats like DRM_FORMAT_C8.
 274	 */
 275	struct drm_property_blob *gamma_lut;
 276
 277	/**
 278	 * @target_vblank:
 279	 *
 280	 * Target vertical blank period when a page flip
 281	 * should take effect.
 282	 */
 283	u32 target_vblank;
 284
 285	/**
 286	 * @async_flip:
 287	 *
 288	 * This is set when DRM_MODE_PAGE_FLIP_ASYNC is set in the legacy
 289	 * PAGE_FLIP IOCTL. It's not wired up for the atomic IOCTL itself yet.
 290	 */
 291	bool async_flip;
 292
 293	/**
 294	 * @vrr_enabled:
 295	 *
 296	 * Indicates if variable refresh rate should be enabled for the CRTC.
 297	 * Support for the requested vrr state will depend on driver and
 298	 * hardware capabiltiy - lacking support is not treated as failure.
 299	 */
 300	bool vrr_enabled;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 301
 302	/**
 303	 * @self_refresh_active:
 304	 *
 305	 * Used by the self refresh helpers to denote when a self refresh
 306	 * transition is occurring. This will be set on enable/disable callbacks
 307	 * when self refresh is being enabled or disabled. In some cases, it may
 308	 * not be desirable to fully shut off the crtc during self refresh.
 309	 * CRTC's can inspect this flag and determine the best course of action.
 310	 */
 311	bool self_refresh_active;
 
 
 
 
 
 
 
 
 312
 313	/**
 314	 * @scaling_filter:
 315	 *
 316	 * Scaling filter to be applied
 317	 */
 318	enum drm_scaling_filter scaling_filter;
 319
 320	/**
 321	 * @event:
 322	 *
 323	 * Optional pointer to a DRM event to signal upon completion of the
 324	 * state update. The driver must send out the event when the atomic
 325	 * commit operation completes. There are two cases:
 326	 *
 327	 *  - The event is for a CRTC which is being disabled through this
 328	 *    atomic commit. In that case the event can be send out any time
 329	 *    after the hardware has stopped scanning out the current
 330	 *    framebuffers. It should contain the timestamp and counter for the
 331	 *    last vblank before the display pipeline was shut off. The simplest
 332	 *    way to achieve that is calling drm_crtc_send_vblank_event()
 333	 *    somewhen after drm_crtc_vblank_off() has been called.
 334	 *
 335	 *  - For a CRTC which is enabled at the end of the commit (even when it
 336	 *    undergoes an full modeset) the vblank timestamp and counter must
 337	 *    be for the vblank right before the first frame that scans out the
 338	 *    new set of buffers. Again the event can only be sent out after the
 339	 *    hardware has stopped scanning out the old buffers.
 340	 *
 341	 *  - Events for disabled CRTCs are not allowed, and drivers can ignore
 342	 *    that case.
 343	 *
 344	 * For very simple hardware without VBLANK interrupt, enabling
 345	 * &struct drm_crtc_state.no_vblank makes DRM's atomic commit helpers
 346	 * send a fake VBLANK event at the end of the display update after all
 347	 * hardware changes have been applied. See
 348	 * drm_atomic_helper_fake_vblank().
 349	 *
 350	 * For more complex hardware this
 351	 * can be handled by the drm_crtc_send_vblank_event() function,
 352	 * which the driver should call on the provided event upon completion of
 353	 * the atomic commit. Note that if the driver supports vblank signalling
 354	 * and timestamping the vblank counters and timestamps must agree with
 355	 * the ones returned from page flip events. With the current vblank
 356	 * helper infrastructure this can be achieved by holding a vblank
 357	 * reference while the page flip is pending, acquired through
 358	 * drm_crtc_vblank_get() and released with drm_crtc_vblank_put().
 359	 * Drivers are free to implement their own vblank counter and timestamp
 360	 * tracking though, e.g. if they have accurate timestamp registers in
 361	 * hardware.
 362	 *
 363	 * For hardware which supports some means to synchronize vblank
 364	 * interrupt delivery with committing display state there's also
 365	 * drm_crtc_arm_vblank_event(). See the documentation of that function
 366	 * for a detailed discussion of the constraints it needs to be used
 367	 * safely.
 368	 *
 369	 * If the device can't notify of flip completion in a race-free way
 370	 * at all, then the event should be armed just after the page flip is
 371	 * committed. In the worst case the driver will send the event to
 372	 * userspace one frame too late. This doesn't allow for a real atomic
 373	 * update, but it should avoid tearing.
 374	 */
 375	struct drm_pending_vblank_event *event;
 376
 377	/**
 378	 * @commit:
 379	 *
 380	 * This tracks how the commit for this update proceeds through the
 381	 * various phases. This is never cleared, except when we destroy the
 382	 * state, so that subsequent commits can synchronize with previous ones.
 383	 */
 384	struct drm_crtc_commit *commit;
 385
 386	/** @state: backpointer to global drm_atomic_state */
 387	struct drm_atomic_state *state;
 388};
 389
 
 
 
 
 
 
 390/**
 391 * struct drm_crtc_funcs - control CRTCs for a given device
 
 
 
 
 
 
 
 
 
 
 392 *
 393 * The drm_crtc_funcs structure is the central CRTC management structure
 394 * in the DRM.  Each CRTC controls one or more connectors (note that the name
 395 * CRTC is simply historical, a CRTC may control LVDS, VGA, DVI, TV out, etc.
 396 * connectors, not just CRTs).
 397 *
 398 * Each driver is responsible for filling out this structure at startup time,
 399 * in addition to providing other modesetting features, like i2c and DDC
 400 * bus accessors.
 401 */
 402struct drm_crtc_funcs {
 403	/**
 404	 * @reset:
 405	 *
 406	 * Reset CRTC hardware and software state to off. This function isn't
 407	 * called by the core directly, only through drm_mode_config_reset().
 408	 * It's not a helper hook only for historical reasons.
 409	 *
 410	 * Atomic drivers can use drm_atomic_helper_crtc_reset() to reset
 411	 * atomic state using this hook.
 412	 */
 413	void (*reset)(struct drm_crtc *crtc);
 414
 415	/**
 416	 * @cursor_set:
 417	 *
 418	 * Update the cursor image. The cursor position is relative to the CRTC
 419	 * and can be partially or fully outside of the visible area.
 420	 *
 421	 * Note that contrary to all other KMS functions the legacy cursor entry
 422	 * points don't take a framebuffer object, but instead take directly a
 423	 * raw buffer object id from the driver's buffer manager (which is
 424	 * either GEM or TTM for current drivers).
 425	 *
 426	 * This entry point is deprecated, drivers should instead implement
 427	 * universal plane support and register a proper cursor plane using
 428	 * drm_crtc_init_with_planes().
 429	 *
 430	 * This callback is optional
 431	 *
 432	 * RETURNS:
 433	 *
 434	 * 0 on success or a negative error code on failure.
 435	 */
 436	int (*cursor_set)(struct drm_crtc *crtc, struct drm_file *file_priv,
 437			  uint32_t handle, uint32_t width, uint32_t height);
 438
 439	/**
 440	 * @cursor_set2:
 441	 *
 442	 * Update the cursor image, including hotspot information. The hotspot
 443	 * must not affect the cursor position in CRTC coordinates, but is only
 444	 * meant as a hint for virtualized display hardware to coordinate the
 445	 * guests and hosts cursor position. The cursor hotspot is relative to
 446	 * the cursor image. Otherwise this works exactly like @cursor_set.
 447	 *
 448	 * This entry point is deprecated, drivers should instead implement
 449	 * universal plane support and register a proper cursor plane using
 450	 * drm_crtc_init_with_planes().
 451	 *
 452	 * This callback is optional.
 453	 *
 454	 * RETURNS:
 455	 *
 456	 * 0 on success or a negative error code on failure.
 457	 */
 458	int (*cursor_set2)(struct drm_crtc *crtc, struct drm_file *file_priv,
 459			   uint32_t handle, uint32_t width, uint32_t height,
 460			   int32_t hot_x, int32_t hot_y);
 461
 462	/**
 463	 * @cursor_move:
 464	 *
 465	 * Update the cursor position. The cursor does not need to be visible
 466	 * when this hook is called.
 467	 *
 468	 * This entry point is deprecated, drivers should instead implement
 469	 * universal plane support and register a proper cursor plane using
 470	 * drm_crtc_init_with_planes().
 471	 *
 472	 * This callback is optional.
 473	 *
 474	 * RETURNS:
 475	 *
 476	 * 0 on success or a negative error code on failure.
 477	 */
 478	int (*cursor_move)(struct drm_crtc *crtc, int x, int y);
 479
 480	/**
 481	 * @gamma_set:
 482	 *
 483	 * Set gamma on the CRTC.
 484	 *
 485	 * This callback is optional.
 486	 *
 487	 * Atomic drivers who want to support gamma tables should implement the
 488	 * atomic color management support, enabled by calling
 489	 * drm_crtc_enable_color_mgmt(), which then supports the legacy gamma
 490	 * interface through the drm_atomic_helper_legacy_gamma_set()
 491	 * compatibility implementation.
 492	 */
 493	int (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b,
 494			 uint32_t size,
 495			 struct drm_modeset_acquire_ctx *ctx);
 496
 497	/**
 498	 * @destroy:
 499	 *
 500	 * Clean up CRTC resources. This is only called at driver unload time
 501	 * through drm_mode_config_cleanup() since a CRTC cannot be hotplugged
 502	 * in DRM.
 503	 */
 504	void (*destroy)(struct drm_crtc *crtc);
 505
 506	/**
 507	 * @set_config:
 508	 *
 509	 * This is the main legacy entry point to change the modeset state on a
 510	 * CRTC. All the details of the desired configuration are passed in a
 511	 * &struct drm_mode_set - see there for details.
 512	 *
 513	 * Drivers implementing atomic modeset should use
 514	 * drm_atomic_helper_set_config() to implement this hook.
 515	 *
 516	 * RETURNS:
 517	 *
 518	 * 0 on success or a negative error code on failure.
 519	 */
 520	int (*set_config)(struct drm_mode_set *set,
 521			  struct drm_modeset_acquire_ctx *ctx);
 522
 523	/**
 524	 * @page_flip:
 525	 *
 526	 * Legacy entry point to schedule a flip to the given framebuffer.
 527	 *
 528	 * Page flipping is a synchronization mechanism that replaces the frame
 529	 * buffer being scanned out by the CRTC with a new frame buffer during
 530	 * vertical blanking, avoiding tearing (except when requested otherwise
 531	 * through the DRM_MODE_PAGE_FLIP_ASYNC flag). When an application
 532	 * requests a page flip the DRM core verifies that the new frame buffer
 533	 * is large enough to be scanned out by the CRTC in the currently
 534	 * configured mode and then calls this hook with a pointer to the new
 535	 * frame buffer.
 536	 *
 537	 * The driver must wait for any pending rendering to the new framebuffer
 538	 * to complete before executing the flip. It should also wait for any
 539	 * pending rendering from other drivers if the underlying buffer is a
 540	 * shared dma-buf.
 541	 *
 542	 * An application can request to be notified when the page flip has
 543	 * completed. The drm core will supply a &struct drm_event in the event
 544	 * parameter in this case. This can be handled by the
 545	 * drm_crtc_send_vblank_event() function, which the driver should call on
 546	 * the provided event upon completion of the flip. Note that if
 547	 * the driver supports vblank signalling and timestamping the vblank
 548	 * counters and timestamps must agree with the ones returned from page
 549	 * flip events. With the current vblank helper infrastructure this can
 550	 * be achieved by holding a vblank reference while the page flip is
 551	 * pending, acquired through drm_crtc_vblank_get() and released with
 552	 * drm_crtc_vblank_put(). Drivers are free to implement their own vblank
 553	 * counter and timestamp tracking though, e.g. if they have accurate
 554	 * timestamp registers in hardware.
 555	 *
 556	 * This callback is optional.
 557	 *
 558	 * NOTE:
 559	 *
 560	 * Very early versions of the KMS ABI mandated that the driver must
 561	 * block (but not reject) any rendering to the old framebuffer until the
 562	 * flip operation has completed and the old framebuffer is no longer
 563	 * visible. This requirement has been lifted, and userspace is instead
 564	 * expected to request delivery of an event and wait with recycling old
 565	 * buffers until such has been received.
 566	 *
 567	 * RETURNS:
 568	 *
 569	 * 0 on success or a negative error code on failure. Note that if a
 570	 * page flip operation is already pending the callback should return
 571	 * -EBUSY. Pageflips on a disabled CRTC (either by setting a NULL mode
 572	 * or just runtime disabled through DPMS respectively the new atomic
 573	 * "ACTIVE" state) should result in an -EINVAL error code. Note that
 574	 * drm_atomic_helper_page_flip() checks this already for atomic drivers.
 575	 */
 576	int (*page_flip)(struct drm_crtc *crtc,
 577			 struct drm_framebuffer *fb,
 578			 struct drm_pending_vblank_event *event,
 579			 uint32_t flags,
 580			 struct drm_modeset_acquire_ctx *ctx);
 581
 582	/**
 583	 * @page_flip_target:
 584	 *
 585	 * Same as @page_flip but with an additional parameter specifying the
 586	 * absolute target vertical blank period (as reported by
 587	 * drm_crtc_vblank_count()) when the flip should take effect.
 588	 *
 589	 * Note that the core code calls drm_crtc_vblank_get before this entry
 590	 * point, and will call drm_crtc_vblank_put if this entry point returns
 591	 * any non-0 error code. It's the driver's responsibility to call
 592	 * drm_crtc_vblank_put after this entry point returns 0, typically when
 593	 * the flip completes.
 594	 */
 595	int (*page_flip_target)(struct drm_crtc *crtc,
 596				struct drm_framebuffer *fb,
 597				struct drm_pending_vblank_event *event,
 598				uint32_t flags, uint32_t target,
 599				struct drm_modeset_acquire_ctx *ctx);
 600
 601	/**
 602	 * @set_property:
 603	 *
 604	 * This is the legacy entry point to update a property attached to the
 605	 * CRTC.
 606	 *
 607	 * This callback is optional if the driver does not support any legacy
 608	 * driver-private properties. For atomic drivers it is not used because
 609	 * property handling is done entirely in the DRM core.
 610	 *
 611	 * RETURNS:
 612	 *
 613	 * 0 on success or a negative error code on failure.
 614	 */
 615	int (*set_property)(struct drm_crtc *crtc,
 616			    struct drm_property *property, uint64_t val);
 
 617
 618	/**
 619	 * @atomic_duplicate_state:
 620	 *
 621	 * Duplicate the current atomic state for this CRTC and return it.
 622	 * The core and helpers guarantee that any atomic state duplicated with
 623	 * this hook and still owned by the caller (i.e. not transferred to the
 624	 * driver by calling &drm_mode_config_funcs.atomic_commit) will be
 625	 * cleaned up by calling the @atomic_destroy_state hook in this
 626	 * structure.
 627	 *
 628	 * This callback is mandatory for atomic drivers.
 629	 *
 630	 * Atomic drivers which don't subclass &struct drm_crtc_state should use
 631	 * drm_atomic_helper_crtc_duplicate_state(). Drivers that subclass the
 632	 * state structure to extend it with driver-private state should use
 633	 * __drm_atomic_helper_crtc_duplicate_state() to make sure shared state is
 634	 * duplicated in a consistent fashion across drivers.
 635	 *
 636	 * It is an error to call this hook before &drm_crtc.state has been
 637	 * initialized correctly.
 638	 *
 639	 * NOTE:
 640	 *
 641	 * If the duplicate state references refcounted resources this hook must
 642	 * acquire a reference for each of them. The driver must release these
 643	 * references again in @atomic_destroy_state.
 644	 *
 645	 * RETURNS:
 646	 *
 647	 * Duplicated atomic state or NULL when the allocation failed.
 648	 */
 649	struct drm_crtc_state *(*atomic_duplicate_state)(struct drm_crtc *crtc);
 650
 651	/**
 652	 * @atomic_destroy_state:
 653	 *
 654	 * Destroy a state duplicated with @atomic_duplicate_state and release
 655	 * or unreference all resources it references
 656	 *
 657	 * This callback is mandatory for atomic drivers.
 658	 */
 659	void (*atomic_destroy_state)(struct drm_crtc *crtc,
 660				     struct drm_crtc_state *state);
 661
 662	/**
 663	 * @atomic_set_property:
 664	 *
 665	 * Decode a driver-private property value and store the decoded value
 666	 * into the passed-in state structure. Since the atomic core decodes all
 667	 * standardized properties (even for extensions beyond the core set of
 668	 * properties which might not be implemented by all drivers) this
 669	 * requires drivers to subclass the state structure.
 670	 *
 671	 * Such driver-private properties should really only be implemented for
 672	 * truly hardware/vendor specific state. Instead it is preferred to
 673	 * standardize atomic extension and decode the properties used to expose
 674	 * such an extension in the core.
 675	 *
 676	 * Do not call this function directly, use
 677	 * drm_atomic_crtc_set_property() instead.
 678	 *
 679	 * This callback is optional if the driver does not support any
 680	 * driver-private atomic properties.
 681	 *
 682	 * NOTE:
 683	 *
 684	 * This function is called in the state assembly phase of atomic
 685	 * modesets, which can be aborted for any reason (including on
 686	 * userspace's request to just check whether a configuration would be
 687	 * possible). Drivers MUST NOT touch any persistent state (hardware or
 688	 * software) or data structures except the passed in @state parameter.
 689	 *
 690	 * Also since userspace controls in which order properties are set this
 691	 * function must not do any input validation (since the state update is
 692	 * incomplete and hence likely inconsistent). Instead any such input
 693	 * validation must be done in the various atomic_check callbacks.
 694	 *
 695	 * RETURNS:
 696	 *
 697	 * 0 if the property has been found, -EINVAL if the property isn't
 698	 * implemented by the driver (which should never happen, the core only
 699	 * asks for properties attached to this CRTC). No other validation is
 700	 * allowed by the driver. The core already checks that the property
 701	 * value is within the range (integer, valid enum value, ...) the driver
 702	 * set when registering the property.
 703	 */
 704	int (*atomic_set_property)(struct drm_crtc *crtc,
 705				   struct drm_crtc_state *state,
 706				   struct drm_property *property,
 707				   uint64_t val);
 708	/**
 709	 * @atomic_get_property:
 710	 *
 711	 * Reads out the decoded driver-private property. This is used to
 712	 * implement the GETCRTC IOCTL.
 713	 *
 714	 * Do not call this function directly, use
 715	 * drm_atomic_crtc_get_property() instead.
 716	 *
 717	 * This callback is optional if the driver does not support any
 718	 * driver-private atomic properties.
 719	 *
 720	 * RETURNS:
 721	 *
 722	 * 0 on success, -EINVAL if the property isn't implemented by the
 723	 * driver (which should never happen, the core only asks for
 724	 * properties attached to this CRTC).
 725	 */
 726	int (*atomic_get_property)(struct drm_crtc *crtc,
 727				   const struct drm_crtc_state *state,
 728				   struct drm_property *property,
 729				   uint64_t *val);
 730
 731	/**
 732	 * @late_register:
 733	 *
 734	 * This optional hook can be used to register additional userspace
 735	 * interfaces attached to the crtc like debugfs interfaces.
 736	 * It is called late in the driver load sequence from drm_dev_register().
 737	 * Everything added from this callback should be unregistered in
 738	 * the early_unregister callback.
 739	 *
 740	 * Returns:
 741	 *
 742	 * 0 on success, or a negative error code on failure.
 743	 */
 744	int (*late_register)(struct drm_crtc *crtc);
 745
 746	/**
 747	 * @early_unregister:
 748	 *
 749	 * This optional hook should be used to unregister the additional
 750	 * userspace interfaces attached to the crtc from
 751	 * @late_register. It is called from drm_dev_unregister(),
 752	 * early in the driver unload sequence to disable userspace access
 753	 * before data structures are torndown.
 754	 */
 755	void (*early_unregister)(struct drm_crtc *crtc);
 756
 757	/**
 758	 * @set_crc_source:
 759	 *
 760	 * Changes the source of CRC checksums of frames at the request of
 761	 * userspace, typically for testing purposes. The sources available are
 762	 * specific of each driver and a %NULL value indicates that CRC
 763	 * generation is to be switched off.
 764	 *
 765	 * When CRC generation is enabled, the driver should call
 766	 * drm_crtc_add_crc_entry() at each frame, providing any information
 767	 * that characterizes the frame contents in the crcN arguments, as
 768	 * provided from the configured source. Drivers must accept an "auto"
 769	 * source name that will select a default source for this CRTC.
 770	 *
 771	 * This may trigger an atomic modeset commit if necessary, to enable CRC
 772	 * generation.
 773	 *
 774	 * Note that "auto" can depend upon the current modeset configuration,
 775	 * e.g. it could pick an encoder or output specific CRC sampling point.
 776	 *
 777	 * This callback is optional if the driver does not support any CRC
 778	 * generation functionality.
 779	 *
 780	 * RETURNS:
 781	 *
 782	 * 0 on success or a negative error code on failure.
 783	 */
 784	int (*set_crc_source)(struct drm_crtc *crtc, const char *source);
 785
 786	/**
 787	 * @verify_crc_source:
 788	 *
 789	 * verifies the source of CRC checksums of frames before setting the
 790	 * source for CRC and during crc open. Source parameter can be NULL
 791	 * while disabling crc source.
 792	 *
 793	 * This callback is optional if the driver does not support any CRC
 794	 * generation functionality.
 795	 *
 796	 * RETURNS:
 797	 *
 798	 * 0 on success or a negative error code on failure.
 799	 */
 800	int (*verify_crc_source)(struct drm_crtc *crtc, const char *source,
 801				 size_t *values_cnt);
 802	/**
 803	 * @get_crc_sources:
 804	 *
 805	 * Driver callback for getting a list of all the available sources for
 806	 * CRC generation. This callback depends upon verify_crc_source, So
 807	 * verify_crc_source callback should be implemented before implementing
 808	 * this. Driver can pass full list of available crc sources, this
 809	 * callback does the verification on each crc-source before passing it
 810	 * to userspace.
 811	 *
 812	 * This callback is optional if the driver does not support exporting of
 813	 * possible CRC sources list.
 814	 *
 815	 * RETURNS:
 816	 *
 817	 * a constant character pointer to the list of all the available CRC
 818	 * sources. On failure driver should return NULL. count should be
 819	 * updated with number of sources in list. if zero we don't process any
 820	 * source from the list.
 821	 */
 822	const char *const *(*get_crc_sources)(struct drm_crtc *crtc,
 823					      size_t *count);
 824
 825	/**
 826	 * @atomic_print_state:
 827	 *
 828	 * If driver subclasses &struct drm_crtc_state, it should implement
 829	 * this optional hook for printing additional driver specific state.
 830	 *
 831	 * Do not call this directly, use drm_atomic_crtc_print_state()
 832	 * instead.
 833	 */
 834	void (*atomic_print_state)(struct drm_printer *p,
 835				   const struct drm_crtc_state *state);
 836
 837	/**
 838	 * @get_vblank_counter:
 839	 *
 840	 * Driver callback for fetching a raw hardware vblank counter for the
 841	 * CRTC. It's meant to be used by new drivers as the replacement of
 842	 * &drm_driver.get_vblank_counter hook.
 843	 *
 844	 * This callback is optional. If a device doesn't have a hardware
 845	 * counter, the driver can simply leave the hook as NULL. The DRM core
 846	 * will account for missed vblank events while interrupts where disabled
 847	 * based on system timestamps.
 848	 *
 849	 * Wraparound handling and loss of events due to modesetting is dealt
 850	 * with in the DRM core code, as long as drivers call
 851	 * drm_crtc_vblank_off() and drm_crtc_vblank_on() when disabling or
 852	 * enabling a CRTC.
 853	 *
 854	 * See also &drm_device.vblank_disable_immediate and
 855	 * &drm_device.max_vblank_count.
 856	 *
 857	 * Returns:
 858	 *
 859	 * Raw vblank counter value.
 860	 */
 861	u32 (*get_vblank_counter)(struct drm_crtc *crtc);
 862
 863	/**
 864	 * @enable_vblank:
 865	 *
 866	 * Enable vblank interrupts for the CRTC. It's meant to be used by
 867	 * new drivers as the replacement of &drm_driver.enable_vblank hook.
 868	 *
 869	 * Returns:
 870	 *
 871	 * Zero on success, appropriate errno if the vblank interrupt cannot
 872	 * be enabled.
 873	 */
 874	int (*enable_vblank)(struct drm_crtc *crtc);
 875
 876	/**
 877	 * @disable_vblank:
 878	 *
 879	 * Disable vblank interrupts for the CRTC. It's meant to be used by
 880	 * new drivers as the replacement of &drm_driver.disable_vblank hook.
 881	 */
 882	void (*disable_vblank)(struct drm_crtc *crtc);
 883
 884	/**
 885	 * @get_vblank_timestamp:
 886	 *
 887	 * Called by drm_get_last_vbltimestamp(). Should return a precise
 888	 * timestamp when the most recent vblank interval ended or will end.
 889	 *
 890	 * Specifically, the timestamp in @vblank_time should correspond as
 891	 * closely as possible to the time when the first video scanline of
 892	 * the video frame after the end of vblank will start scanning out,
 893	 * the time immediately after end of the vblank interval. If the
 894	 * @crtc is currently inside vblank, this will be a time in the future.
 895	 * If the @crtc is currently scanning out a frame, this will be the
 896	 * past start time of the current scanout. This is meant to adhere
 897	 * to the OpenML OML_sync_control extension specification.
 898	 *
 899	 * Parameters:
 900	 *
 901	 * crtc:
 902	 *     CRTC for which timestamp should be returned.
 903	 * max_error:
 904	 *     Maximum allowable timestamp error in nanoseconds.
 905	 *     Implementation should strive to provide timestamp
 906	 *     with an error of at most max_error nanoseconds.
 907	 *     Returns true upper bound on error for timestamp.
 908	 * vblank_time:
 909	 *     Target location for returned vblank timestamp.
 910	 * in_vblank_irq:
 911	 *     True when called from drm_crtc_handle_vblank().  Some drivers
 912	 *     need to apply some workarounds for gpu-specific vblank irq quirks
 913	 *     if flag is set.
 914	 *
 915	 * Returns:
 916	 *
 917	 * True on success, false on failure, which means the core should
 918	 * fallback to a simple timestamp taken in drm_crtc_handle_vblank().
 919	 */
 920	bool (*get_vblank_timestamp)(struct drm_crtc *crtc,
 921				     int *max_error,
 922				     ktime_t *vblank_time,
 923				     bool in_vblank_irq);
 924};
 925
 926/**
 927 * struct drm_crtc - central CRTC control structure
 
 
 928 *
 929 * Each CRTC may have one or more connectors associated with it.  This structure
 930 * allows the CRTC to be controlled.
 931 */
 932struct drm_crtc {
 933	/** @dev: parent DRM device */
 934	struct drm_device *dev;
 935	/** @port: OF node used by drm_of_find_possible_crtcs(). */
 936	struct device_node *port;
 937	/**
 938	 * @head:
 939	 *
 940	 * List of all CRTCs on @dev, linked from &drm_mode_config.crtc_list.
 941	 * Invariant over the lifetime of @dev and therefore does not need
 942	 * locking.
 943	 */
 944	struct list_head head;
 945
 946	/** @name: human readable name, can be overwritten by the driver */
 947	char *name;
 
 948
 949	/**
 950	 * @mutex:
 951	 *
 952	 * This provides a read lock for the overall CRTC state (mode, dpms
 953	 * state, ...) and a write lock for everything which can be update
 954	 * without a full modeset (fb, cursor data, CRTC properties ...). A full
 955	 * modeset also need to grab &drm_mode_config.connection_mutex.
 956	 *
 957	 * For atomic drivers specifically this protects @state.
 958	 */
 959	struct drm_modeset_lock mutex;
 
 
 
 
 
 
 
 960
 961	/** @base: base KMS object for ID tracking etc. */
 962	struct drm_mode_object base;
 
 
 
 963
 964	/**
 965	 * @primary:
 966	 * Primary plane for this CRTC. Note that this is only
 967	 * relevant for legacy IOCTL, it specifies the plane implicitly used by
 968	 * the SETCRTC and PAGE_FLIP IOCTLs. It does not have any significance
 969	 * beyond that.
 970	 */
 971	struct drm_plane *primary;
 972
 973	/**
 974	 * @cursor:
 975	 * Cursor plane for this CRTC. Note that this is only relevant for
 976	 * legacy IOCTL, it specifies the plane implicitly used by the SETCURSOR
 977	 * and SETCURSOR2 IOCTLs. It does not have any significance
 978	 * beyond that.
 979	 */
 980	struct drm_plane *cursor;
 981
 982	/**
 983	 * @index: Position inside the mode_config.list, can be used as an array
 984	 * index. It is invariant over the lifetime of the CRTC.
 985	 */
 986	unsigned index;
 
 
 
 987
 988	/**
 989	 * @cursor_x: Current x position of the cursor, used for universal
 990	 * cursor planes because the SETCURSOR IOCTL only can update the
 991	 * framebuffer without supplying the coordinates. Drivers should not use
 992	 * this directly, atomic drivers should look at &drm_plane_state.crtc_x
 993	 * of the cursor plane instead.
 994	 */
 995	int cursor_x;
 996	/**
 997	 * @cursor_y: Current y position of the cursor, used for universal
 998	 * cursor planes because the SETCURSOR IOCTL only can update the
 999	 * framebuffer without supplying the coordinates. Drivers should not use
1000	 * this directly, atomic drivers should look at &drm_plane_state.crtc_y
1001	 * of the cursor plane instead.
1002	 */
1003	int cursor_y;
1004
1005	/**
1006	 * @enabled:
1007	 *
1008	 * Is this CRTC enabled? Should only be used by legacy drivers, atomic
1009	 * drivers should instead consult &drm_crtc_state.enable and
1010	 * &drm_crtc_state.active. Atomic drivers can update this by calling
1011	 * drm_atomic_helper_update_legacy_modeset_state().
1012	 */
1013	bool enabled;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1014
1015	/**
1016	 * @mode:
1017	 *
1018	 * Current mode timings. Should only be used by legacy drivers, atomic
1019	 * drivers should instead consult &drm_crtc_state.mode. Atomic drivers
1020	 * can update this by calling
1021	 * drm_atomic_helper_update_legacy_modeset_state().
1022	 */
1023	struct drm_display_mode mode;
1024
1025	/**
1026	 * @hwmode:
1027	 *
1028	 * Programmed mode in hw, after adjustments for encoders, crtc, panel
1029	 * scaling etc. Should only be used by legacy drivers, for high
1030	 * precision vblank timestamps in
1031	 * drm_crtc_vblank_helper_get_vblank_timestamp().
1032	 *
1033	 * Note that atomic drivers should not use this, but instead use
1034	 * &drm_crtc_state.adjusted_mode. And for high-precision timestamps
1035	 * drm_crtc_vblank_helper_get_vblank_timestamp() used
1036	 * &drm_vblank_crtc.hwmode,
1037	 * which is filled out by calling drm_calc_timestamping_constants().
1038	 */
1039	struct drm_display_mode hwmode;
1040
1041	/**
1042	 * @x:
1043	 * x position on screen. Should only be used by legacy drivers, atomic
1044	 * drivers should look at &drm_plane_state.crtc_x of the primary plane
1045	 * instead. Updated by calling
1046	 * drm_atomic_helper_update_legacy_modeset_state().
1047	 */
1048	int x;
1049	/**
1050	 * @y:
1051	 * y position on screen. Should only be used by legacy drivers, atomic
1052	 * drivers should look at &drm_plane_state.crtc_y of the primary plane
1053	 * instead. Updated by calling
1054	 * drm_atomic_helper_update_legacy_modeset_state().
1055	 */
1056	int y;
1057
1058	/** @funcs: CRTC control functions */
1059	const struct drm_crtc_funcs *funcs;
1060
1061	/**
1062	 * @gamma_size: Size of legacy gamma ramp reported to userspace. Set up
1063	 * by calling drm_mode_crtc_set_gamma_size().
1064	 *
1065	 * Note that atomic drivers need to instead use
1066	 * &drm_crtc_state.gamma_lut. See drm_crtc_enable_color_mgmt().
1067	 */
1068	uint32_t gamma_size;
1069
1070	/**
1071	 * @gamma_store: Gamma ramp values used by the legacy SETGAMMA and
1072	 * GETGAMMA IOCTls. Set up by calling drm_mode_crtc_set_gamma_size().
1073	 *
1074	 * Note that atomic drivers need to instead use
1075	 * &drm_crtc_state.gamma_lut. See drm_crtc_enable_color_mgmt().
1076	 */
1077	uint16_t *gamma_store;
1078
1079	/** @helper_private: mid-layer private data */
1080	const struct drm_crtc_helper_funcs *helper_private;
1081
1082	/** @properties: property tracking for this CRTC */
1083	struct drm_object_properties properties;
1084
1085	/**
1086	 * @scaling_filter_property: property to apply a particular filter while
1087	 * scaling.
1088	 */
1089	struct drm_property *scaling_filter_property;
 
 
 
 
 
 
 
 
 
1090
1091	/**
1092	 * @state:
1093	 *
1094	 * Current atomic state for this CRTC.
1095	 *
1096	 * This is protected by @mutex. Note that nonblocking atomic commits
1097	 * access the current CRTC state without taking locks. Either by going
1098	 * through the &struct drm_atomic_state pointers, see
1099	 * for_each_oldnew_crtc_in_state(), for_each_old_crtc_in_state() and
1100	 * for_each_new_crtc_in_state(). Or through careful ordering of atomic
1101	 * commit operations as implemented in the atomic helpers, see
1102	 * &struct drm_crtc_commit.
1103	 */
1104	struct drm_crtc_state *state;
 
 
1105
1106	/**
1107	 * @commit_list:
1108	 *
1109	 * List of &drm_crtc_commit structures tracking pending commits.
1110	 * Protected by @commit_lock. This list holds its own full reference,
1111	 * as does the ongoing commit.
1112	 *
1113	 * "Note that the commit for a state change is also tracked in
1114	 * &drm_crtc_state.commit. For accessing the immediately preceding
1115	 * commit in an atomic update it is recommended to just use that
1116	 * pointer in the old CRTC state, since accessing that doesn't need
1117	 * any locking or list-walking. @commit_list should only be used to
1118	 * stall for framebuffer cleanup that's signalled through
1119	 * &drm_crtc_commit.cleanup_done."
1120	 */
1121	struct list_head commit_list;
1122
1123	/**
1124	 * @commit_lock:
1125	 *
1126	 * Spinlock to protect @commit_list.
1127	 */
1128	spinlock_t commit_lock;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1129
1130	/**
1131	 * @debugfs_entry:
1132	 *
1133	 * Debugfs directory for this CRTC.
1134	 */
1135	struct dentry *debugfs_entry;
1136
1137	/**
1138	 * @crc:
1139	 *
1140	 * Configuration settings of CRC capture.
1141	 */
1142	struct drm_crtc_crc crc;
1143
1144	/**
1145	 * @fence_context:
1146	 *
1147	 * timeline context used for fence operations.
1148	 */
1149	unsigned int fence_context;
1150
1151	/**
1152	 * @fence_lock:
1153	 *
1154	 * spinlock to protect the fences in the fence_context.
1155	 */
1156	spinlock_t fence_lock;
1157	/**
1158	 * @fence_seqno:
1159	 *
1160	 * Seqno variable used as monotonic counter for the fences
1161	 * created on the CRTC's timeline.
1162	 */
1163	unsigned long fence_seqno;
1164
1165	/**
1166	 * @timeline_name:
1167	 *
1168	 * The name of the CRTC's fence timeline.
1169	 */
1170	char timeline_name[32];
1171
1172	/**
1173	 * @self_refresh_data: Holds the state for the self refresh helpers
1174	 *
1175	 * Initialized via drm_self_refresh_helper_init().
1176	 */
1177	struct drm_self_refresh_data *self_refresh_data;
1178};
1179
1180/**
1181 * struct drm_mode_set - new values for a CRTC config change
 
1182 * @fb: framebuffer to use for new config
1183 * @crtc: CRTC whose configuration we're about to change
1184 * @mode: mode timings to use
1185 * @x: position of this CRTC relative to @fb
1186 * @y: position of this CRTC relative to @fb
1187 * @connectors: array of connectors to drive with this CRTC if possible
1188 * @num_connectors: size of @connectors array
1189 *
1190 * This represents a modeset configuration for the legacy SETCRTC ioctl and is
1191 * also used internally. Atomic drivers instead use &drm_atomic_state.
 
 
1192 */
1193struct drm_mode_set {
 
 
1194	struct drm_framebuffer *fb;
1195	struct drm_crtc *crtc;
1196	struct drm_display_mode *mode;
1197
1198	uint32_t x;
1199	uint32_t y;
1200
1201	struct drm_connector **connectors;
1202	size_t num_connectors;
1203};
1204
1205#define obj_to_crtc(x) container_of(x, struct drm_crtc, base)
1206
1207__printf(6, 7)
1208int drm_crtc_init_with_planes(struct drm_device *dev,
1209			      struct drm_crtc *crtc,
1210			      struct drm_plane *primary,
1211			      struct drm_plane *cursor,
1212			      const struct drm_crtc_funcs *funcs,
1213			      const char *name, ...);
1214
1215__printf(6, 7)
1216int drmm_crtc_init_with_planes(struct drm_device *dev,
1217			       struct drm_crtc *crtc,
1218			       struct drm_plane *primary,
1219			       struct drm_plane *cursor,
1220			       const struct drm_crtc_funcs *funcs,
1221			       const char *name, ...);
1222
1223void drm_crtc_cleanup(struct drm_crtc *crtc);
1224
1225__printf(7, 8)
1226void *__drmm_crtc_alloc_with_planes(struct drm_device *dev,
1227				    size_t size, size_t offset,
1228				    struct drm_plane *primary,
1229				    struct drm_plane *cursor,
1230				    const struct drm_crtc_funcs *funcs,
1231				    const char *name, ...);
1232
1233/**
1234 * drmm_crtc_alloc_with_planes - Allocate and initialize a new CRTC object with
1235 *    specified primary and cursor planes.
1236 * @dev: DRM device
1237 * @type: the type of the struct which contains struct &drm_crtc
1238 * @member: the name of the &drm_crtc within @type.
1239 * @primary: Primary plane for CRTC
1240 * @cursor: Cursor plane for CRTC
1241 * @funcs: callbacks for the new CRTC
1242 * @name: printf style format string for the CRTC name, or NULL for default name
1243 *
1244 * Allocates and initializes a new crtc object. Cleanup is automatically
1245 * handled through registering drmm_crtc_cleanup() with drmm_add_action().
1246 *
1247 * The @drm_crtc_funcs.destroy hook must be NULL.
1248 *
1249 * Returns:
1250 * Pointer to new crtc, or ERR_PTR on failure.
1251 */
1252#define drmm_crtc_alloc_with_planes(dev, type, member, primary, cursor, funcs, name, ...) \
1253	((type *)__drmm_crtc_alloc_with_planes(dev, sizeof(type), \
1254					       offsetof(type, member), \
1255					       primary, cursor, funcs, \
1256					       name, ##__VA_ARGS__))
1257
1258/**
1259 * drm_crtc_index - find the index of a registered CRTC
1260 * @crtc: CRTC to find index for
1261 *
1262 * Given a registered CRTC, return the index of that CRTC within a DRM
1263 * device's list of CRTCs.
1264 */
1265static inline unsigned int drm_crtc_index(const struct drm_crtc *crtc)
1266{
1267	return crtc->index;
1268}
1269
1270/**
1271 * drm_crtc_mask - find the mask of a registered CRTC
1272 * @crtc: CRTC to find mask for
 
 
 
1273 *
1274 * Given a registered CRTC, return the mask bit of that CRTC for the
1275 * &drm_encoder.possible_crtcs and &drm_plane.possible_crtcs fields.
 
 
 
1276 */
1277static inline uint32_t drm_crtc_mask(const struct drm_crtc *crtc)
1278{
1279	return 1 << drm_crtc_index(crtc);
1280}
1281
1282int drm_mode_set_config_internal(struct drm_mode_set *set);
1283struct drm_crtc *drm_crtc_from_index(struct drm_device *dev, int idx);
 
1284
1285/**
1286 * drm_crtc_find - look up a CRTC object from its ID
1287 * @dev: DRM device
1288 * @file_priv: drm file to check for lease against.
1289 * @id: &drm_mode_object ID
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1290 *
1291 * This can be used to look up a CRTC from its userspace ID. Only used by
1292 * drivers for legacy IOCTLs and interface, nowadays extensions to the KMS
1293 * userspace interface should be done using &drm_property.
1294 */
1295static inline struct drm_crtc *drm_crtc_find(struct drm_device *dev,
1296		struct drm_file *file_priv,
1297		uint32_t id)
1298{
1299	struct drm_mode_object *mo;
1300	mo = drm_mode_object_find(dev, file_priv, id, DRM_MODE_OBJECT_CRTC);
1301	return mo ? obj_to_crtc(mo) : NULL;
1302}
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1303
1304/**
1305 * drm_for_each_crtc - iterate over all CRTCs
1306 * @crtc: a &struct drm_crtc as the loop cursor
1307 * @dev: the &struct drm_device
1308 *
1309 * Iterate over all CRTCs of @dev.
1310 */
1311#define drm_for_each_crtc(crtc, dev) \
1312	list_for_each_entry(crtc, &(dev)->mode_config.crtc_list, head)
1313
1314/**
1315 * drm_for_each_crtc_reverse - iterate over all CRTCs in reverse order
1316 * @crtc: a &struct drm_crtc as the loop cursor
1317 * @dev: the &struct drm_device
1318 *
1319 * Iterate over all CRTCs of @dev.
1320 */
1321#define drm_for_each_crtc_reverse(crtc, dev) \
1322	list_for_each_entry_reverse(crtc, &(dev)->mode_config.crtc_list, head)
 
 
 
 
1323
1324int drm_crtc_create_scaling_filter_property(struct drm_crtc *crtc,
1325					    unsigned int supported_filters);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1326
1327#endif /* __DRM_CRTC_H__ */