Loading...
1/* SPDX-License-Identifier: GPL-2.0 */
2#ifndef _RAID1_H
3#define _RAID1_H
4
5/*
6 * each barrier unit size is 64MB fow now
7 * note: it must be larger than RESYNC_DEPTH
8 */
9#define BARRIER_UNIT_SECTOR_BITS 17
10#define BARRIER_UNIT_SECTOR_SIZE (1<<17)
11/*
12 * In struct r1conf, the following members are related to I/O barrier
13 * buckets,
14 * atomic_t *nr_pending;
15 * atomic_t *nr_waiting;
16 * atomic_t *nr_queued;
17 * atomic_t *barrier;
18 * Each of them points to array of atomic_t variables, each array is
19 * designed to have BARRIER_BUCKETS_NR elements and occupy a single
20 * memory page. The data width of atomic_t variables is 4 bytes, equal
21 * to 1<<(ilog2(sizeof(atomic_t))), BARRIER_BUCKETS_NR_BITS is defined
22 * as (PAGE_SHIFT - ilog2(sizeof(int))) to make sure an array of
23 * atomic_t variables with BARRIER_BUCKETS_NR elements just exactly
24 * occupies a single memory page.
25 */
26#define BARRIER_BUCKETS_NR_BITS (PAGE_SHIFT - ilog2(sizeof(atomic_t)))
27#define BARRIER_BUCKETS_NR (1<<BARRIER_BUCKETS_NR_BITS)
28
29/* Note: raid1_info.rdev can be set to NULL asynchronously by raid1_remove_disk.
30 * There are three safe ways to access raid1_info.rdev.
31 * 1/ when holding mddev->reconfig_mutex
32 * 2/ when resync/recovery is known to be happening - i.e. in code that is
33 * called as part of performing resync/recovery.
34 * 3/ while holding rcu_read_lock(), use rcu_dereference to get the pointer
35 * and if it is non-NULL, increment rdev->nr_pending before dropping the
36 * RCU lock.
37 * When .rdev is set to NULL, the nr_pending count checked again and if it has
38 * been incremented, the pointer is put back in .rdev.
39 */
40
41struct raid1_info {
42 struct md_rdev *rdev;
43 sector_t head_position;
44
45 /* When choose the best device for a read (read_balance())
46 * we try to keep sequential reads one the same device
47 */
48 sector_t next_seq_sect;
49 sector_t seq_start;
50};
51
52/*
53 * memory pools need a pointer to the mddev, so they can force an unplug
54 * when memory is tight, and a count of the number of drives that the
55 * pool was allocated for, so they know how much to allocate and free.
56 * mddev->raid_disks cannot be used, as it can change while a pool is active
57 * These two datums are stored in a kmalloced struct.
58 * The 'raid_disks' here is twice the raid_disks in r1conf.
59 * This allows space for each 'real' device can have a replacement in the
60 * second half of the array.
61 */
62
63struct pool_info {
64 struct mddev *mddev;
65 int raid_disks;
66};
67
68struct r1conf {
69 struct mddev *mddev;
70 struct raid1_info *mirrors; /* twice 'raid_disks' to
71 * allow for replacements.
72 */
73 int raid_disks;
74 int nonrot_disks;
75
76 spinlock_t device_lock;
77
78 /* list of 'struct r1bio' that need to be processed by raid1d,
79 * whether to retry a read, writeout a resync or recovery
80 * block, or anything else.
81 */
82 struct list_head retry_list;
83 /* A separate list of r1bio which just need raid_end_bio_io called.
84 * This mustn't happen for writes which had any errors if the superblock
85 * needs to be written.
86 */
87 struct list_head bio_end_io_list;
88
89 /* queue pending writes to be submitted on unplug */
90 struct bio_list pending_bio_list;
91
92 /* for use when syncing mirrors:
93 * We don't allow both normal IO and resync/recovery IO at
94 * the same time - resync/recovery can only happen when there
95 * is no other IO. So when either is active, the other has to wait.
96 * See more details description in raid1.c near raise_barrier().
97 */
98 wait_queue_head_t wait_barrier;
99 spinlock_t resync_lock;
100 atomic_t nr_sync_pending;
101 atomic_t *nr_pending;
102 atomic_t *nr_waiting;
103 atomic_t *nr_queued;
104 atomic_t *barrier;
105 int array_frozen;
106
107 /* Set to 1 if a full sync is needed, (fresh device added).
108 * Cleared when a sync completes.
109 */
110 int fullsync;
111
112 /* When the same as mddev->recovery_disabled we don't allow
113 * recovery to be attempted as we expect a read error.
114 */
115 int recovery_disabled;
116
117 /* poolinfo contains information about the content of the
118 * mempools - it changes when the array grows or shrinks
119 */
120 struct pool_info *poolinfo;
121 mempool_t r1bio_pool;
122 mempool_t r1buf_pool;
123
124 struct bio_set bio_split;
125
126 /* temporary buffer to synchronous IO when attempting to repair
127 * a read error.
128 */
129 struct page *tmppage;
130
131 /* When taking over an array from a different personality, we store
132 * the new thread here until we fully activate the array.
133 */
134 struct md_thread __rcu *thread;
135
136 /* Keep track of cluster resync window to send to other
137 * nodes.
138 */
139 sector_t cluster_sync_low;
140 sector_t cluster_sync_high;
141
142};
143
144/*
145 * this is our 'private' RAID1 bio.
146 *
147 * it contains information about what kind of IO operations were started
148 * for this RAID1 operation, and about their status:
149 */
150
151struct r1bio {
152 atomic_t remaining; /* 'have we finished' count,
153 * used from IRQ handlers
154 */
155 atomic_t behind_remaining; /* number of write-behind ios remaining
156 * in this BehindIO request
157 */
158 sector_t sector;
159 int sectors;
160 unsigned long state;
161 struct mddev *mddev;
162 /*
163 * original bio going to /dev/mdx
164 */
165 struct bio *master_bio;
166 /*
167 * if the IO is in READ direction, then this is where we read
168 */
169 int read_disk;
170
171 struct list_head retry_list;
172
173 /*
174 * When R1BIO_BehindIO is set, we store pages for write behind
175 * in behind_master_bio.
176 */
177 struct bio *behind_master_bio;
178
179 /*
180 * if the IO is in WRITE direction, then multiple bios are used.
181 * We choose the number when they are allocated.
182 */
183 struct bio *bios[];
184 /* DO NOT PUT ANY NEW FIELDS HERE - bios array is contiguously alloced*/
185};
186
187/* bits for r1bio.state */
188enum r1bio_state {
189 R1BIO_Uptodate,
190 R1BIO_IsSync,
191 R1BIO_BehindIO,
192/* Set ReadError on bios that experience a readerror so that
193 * raid1d knows what to do with them.
194 */
195 R1BIO_ReadError,
196/* For write-behind requests, we call bi_end_io when
197 * the last non-write-behind device completes, providing
198 * any write was successful. Otherwise we call when
199 * any write-behind write succeeds, otherwise we call
200 * with failure when last write completes (and all failed).
201 * Record that bi_end_io was called with this flag...
202 */
203 R1BIO_Returned,
204/* If a write for this request means we can clear some
205 * known-bad-block records, we set this flag
206 */
207 R1BIO_MadeGood,
208 R1BIO_WriteError,
209 R1BIO_FailFast,
210};
211
212static inline int sector_to_idx(sector_t sector)
213{
214 return hash_long(sector >> BARRIER_UNIT_SECTOR_BITS,
215 BARRIER_BUCKETS_NR_BITS);
216}
217#endif
1#ifndef _RAID1_H
2#define _RAID1_H
3
4struct mirror_info {
5 struct md_rdev *rdev;
6 sector_t head_position;
7};
8
9/*
10 * memory pools need a pointer to the mddev, so they can force an unplug
11 * when memory is tight, and a count of the number of drives that the
12 * pool was allocated for, so they know how much to allocate and free.
13 * mddev->raid_disks cannot be used, as it can change while a pool is active
14 * These two datums are stored in a kmalloced struct.
15 * The 'raid_disks' here is twice the raid_disks in r1conf.
16 * This allows space for each 'real' device can have a replacement in the
17 * second half of the array.
18 */
19
20struct pool_info {
21 struct mddev *mddev;
22 int raid_disks;
23};
24
25struct r1conf {
26 struct mddev *mddev;
27 struct mirror_info *mirrors; /* twice 'raid_disks' to
28 * allow for replacements.
29 */
30 int raid_disks;
31
32 /* When choose the best device for a read (read_balance())
33 * we try to keep sequential reads one the same device
34 * using 'last_used' and 'next_seq_sect'
35 */
36 int last_used;
37 sector_t next_seq_sect;
38 /* During resync, read_balancing is only allowed on the part
39 * of the array that has been resynced. 'next_resync' tells us
40 * where that is.
41 */
42 sector_t next_resync;
43
44 spinlock_t device_lock;
45
46 /* list of 'struct r1bio' that need to be processed by raid1d,
47 * whether to retry a read, writeout a resync or recovery
48 * block, or anything else.
49 */
50 struct list_head retry_list;
51
52 /* queue pending writes to be submitted on unplug */
53 struct bio_list pending_bio_list;
54 int pending_count;
55
56 /* for use when syncing mirrors:
57 * We don't allow both normal IO and resync/recovery IO at
58 * the same time - resync/recovery can only happen when there
59 * is no other IO. So when either is active, the other has to wait.
60 * See more details description in raid1.c near raise_barrier().
61 */
62 wait_queue_head_t wait_barrier;
63 spinlock_t resync_lock;
64 int nr_pending;
65 int nr_waiting;
66 int nr_queued;
67 int barrier;
68
69 /* Set to 1 if a full sync is needed, (fresh device added).
70 * Cleared when a sync completes.
71 */
72 int fullsync;
73
74 /* When the same as mddev->recovery_disabled we don't allow
75 * recovery to be attempted as we expect a read error.
76 */
77 int recovery_disabled;
78
79
80 /* poolinfo contains information about the content of the
81 * mempools - it changes when the array grows or shrinks
82 */
83 struct pool_info *poolinfo;
84 mempool_t *r1bio_pool;
85 mempool_t *r1buf_pool;
86
87 /* temporary buffer to synchronous IO when attempting to repair
88 * a read error.
89 */
90 struct page *tmppage;
91
92
93 /* When taking over an array from a different personality, we store
94 * the new thread here until we fully activate the array.
95 */
96 struct md_thread *thread;
97};
98
99/*
100 * this is our 'private' RAID1 bio.
101 *
102 * it contains information about what kind of IO operations were started
103 * for this RAID1 operation, and about their status:
104 */
105
106struct r1bio {
107 atomic_t remaining; /* 'have we finished' count,
108 * used from IRQ handlers
109 */
110 atomic_t behind_remaining; /* number of write-behind ios remaining
111 * in this BehindIO request
112 */
113 sector_t sector;
114 int sectors;
115 unsigned long state;
116 struct mddev *mddev;
117 /*
118 * original bio going to /dev/mdx
119 */
120 struct bio *master_bio;
121 /*
122 * if the IO is in READ direction, then this is where we read
123 */
124 int read_disk;
125
126 struct list_head retry_list;
127 /* Next two are only valid when R1BIO_BehindIO is set */
128 struct bio_vec *behind_bvecs;
129 int behind_page_count;
130 /*
131 * if the IO is in WRITE direction, then multiple bios are used.
132 * We choose the number when they are allocated.
133 */
134 struct bio *bios[0];
135 /* DO NOT PUT ANY NEW FIELDS HERE - bios array is contiguously alloced*/
136};
137
138/* when we get a read error on a read-only array, we redirect to another
139 * device without failing the first device, or trying to over-write to
140 * correct the read error. To keep track of bad blocks on a per-bio
141 * level, we store IO_BLOCKED in the appropriate 'bios' pointer
142 */
143#define IO_BLOCKED ((struct bio *)1)
144/* When we successfully write to a known bad-block, we need to remove the
145 * bad-block marking which must be done from process context. So we record
146 * the success by setting bios[n] to IO_MADE_GOOD
147 */
148#define IO_MADE_GOOD ((struct bio *)2)
149
150#define BIO_SPECIAL(bio) ((unsigned long)bio <= 2)
151
152/* bits for r1bio.state */
153#define R1BIO_Uptodate 0
154#define R1BIO_IsSync 1
155#define R1BIO_Degraded 2
156#define R1BIO_BehindIO 3
157/* Set ReadError on bios that experience a readerror so that
158 * raid1d knows what to do with them.
159 */
160#define R1BIO_ReadError 4
161/* For write-behind requests, we call bi_end_io when
162 * the last non-write-behind device completes, providing
163 * any write was successful. Otherwise we call when
164 * any write-behind write succeeds, otherwise we call
165 * with failure when last write completes (and all failed).
166 * Record that bi_end_io was called with this flag...
167 */
168#define R1BIO_Returned 6
169/* If a write for this request means we can clear some
170 * known-bad-block records, we set this flag
171 */
172#define R1BIO_MadeGood 7
173#define R1BIO_WriteError 8
174
175extern int md_raid1_congested(struct mddev *mddev, int bits);
176
177#endif