Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright (c) 2008-2009 Atheros Communications Inc.
4 */
5
6#include <linux/module.h>
7#include <linux/kernel.h>
8#include <linux/init.h>
9#include <linux/slab.h>
10#include <linux/types.h>
11#include <linux/errno.h>
12#include <linux/firmware.h>
13#include <linux/usb.h>
14#include <linux/unaligned.h>
15#include <net/bluetooth/bluetooth.h>
16
17#define VERSION "1.0"
18#define ATH3K_FIRMWARE "ath3k-1.fw"
19
20#define ATH3K_DNLOAD 0x01
21#define ATH3K_GETSTATE 0x05
22#define ATH3K_SET_NORMAL_MODE 0x07
23#define ATH3K_GETVERSION 0x09
24#define USB_REG_SWITCH_VID_PID 0x0a
25
26#define ATH3K_MODE_MASK 0x3F
27#define ATH3K_NORMAL_MODE 0x0E
28
29#define ATH3K_PATCH_UPDATE 0x80
30#define ATH3K_SYSCFG_UPDATE 0x40
31
32#define ATH3K_XTAL_FREQ_26M 0x00
33#define ATH3K_XTAL_FREQ_40M 0x01
34#define ATH3K_XTAL_FREQ_19P2 0x02
35#define ATH3K_NAME_LEN 0xFF
36
37struct ath3k_version {
38 __le32 rom_version;
39 __le32 build_version;
40 __le32 ram_version;
41 __u8 ref_clock;
42 __u8 reserved[7];
43} __packed;
44
45static const struct usb_device_id ath3k_table[] = {
46 /* Atheros AR3011 */
47 { USB_DEVICE(0x0CF3, 0x3000) },
48
49 /* Atheros AR3011 with sflash firmware*/
50 { USB_DEVICE(0x0489, 0xE027) },
51 { USB_DEVICE(0x0489, 0xE03D) },
52 { USB_DEVICE(0x04F2, 0xAFF1) },
53 { USB_DEVICE(0x0930, 0x0215) },
54 { USB_DEVICE(0x0CF3, 0x3002) },
55 { USB_DEVICE(0x0CF3, 0xE019) },
56 { USB_DEVICE(0x13d3, 0x3304) },
57
58 /* Atheros AR9285 Malbec with sflash firmware */
59 { USB_DEVICE(0x03F0, 0x311D) },
60
61 /* Atheros AR3012 with sflash firmware*/
62 { USB_DEVICE(0x0489, 0xe04d) },
63 { USB_DEVICE(0x0489, 0xe04e) },
64 { USB_DEVICE(0x0489, 0xe057) },
65 { USB_DEVICE(0x0489, 0xe056) },
66 { USB_DEVICE(0x0489, 0xe05f) },
67 { USB_DEVICE(0x0489, 0xe076) },
68 { USB_DEVICE(0x0489, 0xe078) },
69 { USB_DEVICE(0x0489, 0xe095) },
70 { USB_DEVICE(0x04c5, 0x1330) },
71 { USB_DEVICE(0x04CA, 0x3004) },
72 { USB_DEVICE(0x04CA, 0x3005) },
73 { USB_DEVICE(0x04CA, 0x3006) },
74 { USB_DEVICE(0x04CA, 0x3007) },
75 { USB_DEVICE(0x04CA, 0x3008) },
76 { USB_DEVICE(0x04CA, 0x300b) },
77 { USB_DEVICE(0x04CA, 0x300d) },
78 { USB_DEVICE(0x04CA, 0x300f) },
79 { USB_DEVICE(0x04CA, 0x3010) },
80 { USB_DEVICE(0x04CA, 0x3014) },
81 { USB_DEVICE(0x04CA, 0x3018) },
82 { USB_DEVICE(0x0930, 0x0219) },
83 { USB_DEVICE(0x0930, 0x021c) },
84 { USB_DEVICE(0x0930, 0x0220) },
85 { USB_DEVICE(0x0930, 0x0227) },
86 { USB_DEVICE(0x0b05, 0x17d0) },
87 { USB_DEVICE(0x0CF3, 0x0036) },
88 { USB_DEVICE(0x0CF3, 0x3004) },
89 { USB_DEVICE(0x0CF3, 0x3008) },
90 { USB_DEVICE(0x0CF3, 0x311D) },
91 { USB_DEVICE(0x0CF3, 0x311E) },
92 { USB_DEVICE(0x0CF3, 0x311F) },
93 { USB_DEVICE(0x0cf3, 0x3121) },
94 { USB_DEVICE(0x0CF3, 0x817a) },
95 { USB_DEVICE(0x0CF3, 0x817b) },
96 { USB_DEVICE(0x0cf3, 0xe003) },
97 { USB_DEVICE(0x0CF3, 0xE004) },
98 { USB_DEVICE(0x0CF3, 0xE005) },
99 { USB_DEVICE(0x0CF3, 0xE006) },
100 { USB_DEVICE(0x13d3, 0x3362) },
101 { USB_DEVICE(0x13d3, 0x3375) },
102 { USB_DEVICE(0x13d3, 0x3393) },
103 { USB_DEVICE(0x13d3, 0x3395) },
104 { USB_DEVICE(0x13d3, 0x3402) },
105 { USB_DEVICE(0x13d3, 0x3408) },
106 { USB_DEVICE(0x13d3, 0x3423) },
107 { USB_DEVICE(0x13d3, 0x3432) },
108 { USB_DEVICE(0x13d3, 0x3472) },
109 { USB_DEVICE(0x13d3, 0x3474) },
110 { USB_DEVICE(0x13d3, 0x3487) },
111 { USB_DEVICE(0x13d3, 0x3490) },
112
113 /* Atheros AR5BBU12 with sflash firmware */
114 { USB_DEVICE(0x0489, 0xE02C) },
115
116 /* Atheros AR5BBU22 with sflash firmware */
117 { USB_DEVICE(0x0489, 0xE036) },
118 { USB_DEVICE(0x0489, 0xE03C) },
119
120 { } /* Terminating entry */
121};
122
123MODULE_DEVICE_TABLE(usb, ath3k_table);
124
125#define BTUSB_ATH3012 0x80
126/* This table is to load patch and sysconfig files
127 * for AR3012
128 */
129static const struct usb_device_id ath3k_blist_tbl[] = {
130 /* Atheros AR3012 with sflash firmware*/
131 { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
132 { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
133 { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
134 { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
135 { USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
136 { USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 },
137 { USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
138 { USB_DEVICE(0x0489, 0xe095), .driver_info = BTUSB_ATH3012 },
139 { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
140 { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
141 { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
142 { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
143 { USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
144 { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
145 { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
146 { USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 },
147 { USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
148 { USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
149 { USB_DEVICE(0x04ca, 0x3014), .driver_info = BTUSB_ATH3012 },
150 { USB_DEVICE(0x04ca, 0x3018), .driver_info = BTUSB_ATH3012 },
151 { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
152 { USB_DEVICE(0x0930, 0x021c), .driver_info = BTUSB_ATH3012 },
153 { USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
154 { USB_DEVICE(0x0930, 0x0227), .driver_info = BTUSB_ATH3012 },
155 { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
156 { USB_DEVICE(0x0CF3, 0x0036), .driver_info = BTUSB_ATH3012 },
157 { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
158 { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
159 { USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
160 { USB_DEVICE(0x0cf3, 0x311E), .driver_info = BTUSB_ATH3012 },
161 { USB_DEVICE(0x0cf3, 0x311F), .driver_info = BTUSB_ATH3012 },
162 { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
163 { USB_DEVICE(0x0CF3, 0x817a), .driver_info = BTUSB_ATH3012 },
164 { USB_DEVICE(0x0CF3, 0x817b), .driver_info = BTUSB_ATH3012 },
165 { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
166 { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
167 { USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 },
168 { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
169 { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
170 { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
171 { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
172 { USB_DEVICE(0x13d3, 0x3395), .driver_info = BTUSB_ATH3012 },
173 { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
174 { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
175 { USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
176 { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
177 { USB_DEVICE(0x13d3, 0x3472), .driver_info = BTUSB_ATH3012 },
178 { USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
179 { USB_DEVICE(0x13d3, 0x3487), .driver_info = BTUSB_ATH3012 },
180 { USB_DEVICE(0x13d3, 0x3490), .driver_info = BTUSB_ATH3012 },
181
182 /* Atheros AR5BBU22 with sflash firmware */
183 { USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 },
184 { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
185
186 { } /* Terminating entry */
187};
188
189static inline void ath3k_log_failed_loading(int err, int len, int size,
190 int count)
191{
192 BT_ERR("Firmware loading err = %d, len = %d, size = %d, count = %d",
193 err, len, size, count);
194}
195
196#define USB_REQ_DFU_DNLOAD 1
197#define BULK_SIZE 4096
198#define FW_HDR_SIZE 20
199#define TIMEGAP_USEC_MIN 50
200#define TIMEGAP_USEC_MAX 100
201
202static int ath3k_load_firmware(struct usb_device *udev,
203 const struct firmware *firmware)
204{
205 u8 *send_buf;
206 int len = 0;
207 int err, pipe, size, sent = 0;
208 int count = firmware->size;
209
210 BT_DBG("udev %p", udev);
211
212 send_buf = kmalloc(BULK_SIZE, GFP_KERNEL);
213 if (!send_buf) {
214 BT_ERR("Can't allocate memory chunk for firmware");
215 return -ENOMEM;
216 }
217
218 err = usb_control_msg_send(udev, 0, USB_REQ_DFU_DNLOAD, USB_TYPE_VENDOR,
219 0, 0, firmware->data, FW_HDR_SIZE,
220 USB_CTRL_SET_TIMEOUT, GFP_KERNEL);
221 if (err) {
222 BT_ERR("Can't change to loading configuration err");
223 goto error;
224 }
225 sent += FW_HDR_SIZE;
226 count -= FW_HDR_SIZE;
227
228 pipe = usb_sndbulkpipe(udev, 0x02);
229
230 while (count) {
231 /* workaround the compatibility issue with xHCI controller*/
232 usleep_range(TIMEGAP_USEC_MIN, TIMEGAP_USEC_MAX);
233
234 size = min_t(uint, count, BULK_SIZE);
235 memcpy(send_buf, firmware->data + sent, size);
236
237 err = usb_bulk_msg(udev, pipe, send_buf, size,
238 &len, 3000);
239
240 if (err || len != size) {
241 ath3k_log_failed_loading(err, len, size, count);
242 goto error;
243 }
244
245 sent += size;
246 count -= size;
247 }
248
249error:
250 kfree(send_buf);
251 return err;
252}
253
254static int ath3k_get_state(struct usb_device *udev, unsigned char *state)
255{
256 return usb_control_msg_recv(udev, 0, ATH3K_GETSTATE,
257 USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
258 state, 1, USB_CTRL_SET_TIMEOUT,
259 GFP_KERNEL);
260}
261
262static int ath3k_get_version(struct usb_device *udev,
263 struct ath3k_version *version)
264{
265 return usb_control_msg_recv(udev, 0, ATH3K_GETVERSION,
266 USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
267 version, sizeof(*version), USB_CTRL_SET_TIMEOUT,
268 GFP_KERNEL);
269}
270
271static int ath3k_load_fwfile(struct usb_device *udev,
272 const struct firmware *firmware)
273{
274 u8 *send_buf;
275 int len = 0;
276 int err, pipe, size, count, sent = 0;
277 int ret;
278
279 count = firmware->size;
280
281 send_buf = kmalloc(BULK_SIZE, GFP_KERNEL);
282 if (!send_buf) {
283 BT_ERR("Can't allocate memory chunk for firmware");
284 return -ENOMEM;
285 }
286
287 size = min_t(uint, count, FW_HDR_SIZE);
288
289 ret = usb_control_msg_send(udev, 0, ATH3K_DNLOAD, USB_TYPE_VENDOR, 0, 0,
290 firmware->data, size, USB_CTRL_SET_TIMEOUT,
291 GFP_KERNEL);
292 if (ret) {
293 BT_ERR("Can't change to loading configuration err");
294 kfree(send_buf);
295 return ret;
296 }
297
298 sent += size;
299 count -= size;
300
301 pipe = usb_sndbulkpipe(udev, 0x02);
302
303 while (count) {
304 /* workaround the compatibility issue with xHCI controller*/
305 usleep_range(TIMEGAP_USEC_MIN, TIMEGAP_USEC_MAX);
306
307 size = min_t(uint, count, BULK_SIZE);
308 memcpy(send_buf, firmware->data + sent, size);
309
310 err = usb_bulk_msg(udev, pipe, send_buf, size,
311 &len, 3000);
312 if (err || len != size) {
313 ath3k_log_failed_loading(err, len, size, count);
314 kfree(send_buf);
315 return err;
316 }
317 sent += size;
318 count -= size;
319 }
320
321 kfree(send_buf);
322 return 0;
323}
324
325static void ath3k_switch_pid(struct usb_device *udev)
326{
327 usb_control_msg_send(udev, 0, USB_REG_SWITCH_VID_PID, USB_TYPE_VENDOR,
328 0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT, GFP_KERNEL);
329}
330
331static int ath3k_set_normal_mode(struct usb_device *udev)
332{
333 unsigned char fw_state;
334 int ret;
335
336 ret = ath3k_get_state(udev, &fw_state);
337 if (ret) {
338 BT_ERR("Can't get state to change to normal mode err");
339 return ret;
340 }
341
342 if ((fw_state & ATH3K_MODE_MASK) == ATH3K_NORMAL_MODE) {
343 BT_DBG("firmware was already in normal mode");
344 return 0;
345 }
346
347 return usb_control_msg_send(udev, 0, ATH3K_SET_NORMAL_MODE,
348 USB_TYPE_VENDOR, 0, 0, NULL, 0,
349 USB_CTRL_SET_TIMEOUT, GFP_KERNEL);
350}
351
352static int ath3k_load_patch(struct usb_device *udev)
353{
354 unsigned char fw_state;
355 char filename[ATH3K_NAME_LEN];
356 const struct firmware *firmware;
357 struct ath3k_version fw_version;
358 __u32 pt_rom_version, pt_build_version;
359 int ret;
360
361 ret = ath3k_get_state(udev, &fw_state);
362 if (ret) {
363 BT_ERR("Can't get state to change to load ram patch err");
364 return ret;
365 }
366
367 if (fw_state & ATH3K_PATCH_UPDATE) {
368 BT_DBG("Patch was already downloaded");
369 return 0;
370 }
371
372 ret = ath3k_get_version(udev, &fw_version);
373 if (ret) {
374 BT_ERR("Can't get version to change to load ram patch err");
375 return ret;
376 }
377
378 snprintf(filename, ATH3K_NAME_LEN, "ar3k/AthrBT_0x%08x.dfu",
379 le32_to_cpu(fw_version.rom_version));
380
381 ret = request_firmware(&firmware, filename, &udev->dev);
382 if (ret < 0) {
383 BT_ERR("Patch file not found %s", filename);
384 return ret;
385 }
386
387 pt_rom_version = get_unaligned_le32(firmware->data +
388 firmware->size - 8);
389 pt_build_version = get_unaligned_le32(firmware->data +
390 firmware->size - 4);
391
392 if (pt_rom_version != le32_to_cpu(fw_version.rom_version) ||
393 pt_build_version <= le32_to_cpu(fw_version.build_version)) {
394 BT_ERR("Patch file version did not match with firmware");
395 release_firmware(firmware);
396 return -EINVAL;
397 }
398
399 ret = ath3k_load_fwfile(udev, firmware);
400 release_firmware(firmware);
401
402 return ret;
403}
404
405static int ath3k_load_syscfg(struct usb_device *udev)
406{
407 unsigned char fw_state;
408 char filename[ATH3K_NAME_LEN];
409 const struct firmware *firmware;
410 struct ath3k_version fw_version;
411 int clk_value, ret;
412
413 ret = ath3k_get_state(udev, &fw_state);
414 if (ret) {
415 BT_ERR("Can't get state to change to load configuration err");
416 return -EBUSY;
417 }
418
419 ret = ath3k_get_version(udev, &fw_version);
420 if (ret) {
421 BT_ERR("Can't get version to change to load ram patch err");
422 return ret;
423 }
424
425 switch (fw_version.ref_clock) {
426 case ATH3K_XTAL_FREQ_26M:
427 clk_value = 26;
428 break;
429 case ATH3K_XTAL_FREQ_40M:
430 clk_value = 40;
431 break;
432 case ATH3K_XTAL_FREQ_19P2:
433 clk_value = 19;
434 break;
435 default:
436 clk_value = 0;
437 break;
438 }
439
440 snprintf(filename, ATH3K_NAME_LEN, "ar3k/ramps_0x%08x_%d%s",
441 le32_to_cpu(fw_version.rom_version), clk_value, ".dfu");
442
443 ret = request_firmware(&firmware, filename, &udev->dev);
444 if (ret < 0) {
445 BT_ERR("Configuration file not found %s", filename);
446 return ret;
447 }
448
449 ret = ath3k_load_fwfile(udev, firmware);
450 release_firmware(firmware);
451
452 return ret;
453}
454
455static int ath3k_probe(struct usb_interface *intf,
456 const struct usb_device_id *id)
457{
458 const struct firmware *firmware;
459 struct usb_device *udev = interface_to_usbdev(intf);
460 int ret;
461
462 BT_DBG("intf %p id %p", intf, id);
463
464 if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
465 return -ENODEV;
466
467 /* match device ID in ath3k blacklist table */
468 if (!id->driver_info) {
469 const struct usb_device_id *match;
470
471 match = usb_match_id(intf, ath3k_blist_tbl);
472 if (match)
473 id = match;
474 }
475
476 /* load patch and sysconfig files for AR3012 */
477 if (id->driver_info & BTUSB_ATH3012) {
478 /* New firmware with patch and sysconfig files already loaded */
479 if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x0001)
480 return -ENODEV;
481
482 ret = ath3k_load_patch(udev);
483 if (ret < 0) {
484 BT_ERR("Loading patch file failed");
485 return ret;
486 }
487 ret = ath3k_load_syscfg(udev);
488 if (ret < 0) {
489 BT_ERR("Loading sysconfig file failed");
490 return ret;
491 }
492 ret = ath3k_set_normal_mode(udev);
493 if (ret) {
494 BT_ERR("Set normal mode failed");
495 return ret;
496 }
497 ath3k_switch_pid(udev);
498 return 0;
499 }
500
501 ret = request_firmware(&firmware, ATH3K_FIRMWARE, &udev->dev);
502 if (ret < 0) {
503 if (ret == -ENOENT)
504 BT_ERR("Firmware file \"%s\" not found",
505 ATH3K_FIRMWARE);
506 else
507 BT_ERR("Firmware file \"%s\" request failed (err=%d)",
508 ATH3K_FIRMWARE, ret);
509 return ret;
510 }
511
512 ret = ath3k_load_firmware(udev, firmware);
513 release_firmware(firmware);
514
515 return ret;
516}
517
518static void ath3k_disconnect(struct usb_interface *intf)
519{
520 BT_DBG("%s intf %p", __func__, intf);
521}
522
523static struct usb_driver ath3k_driver = {
524 .name = "ath3k",
525 .probe = ath3k_probe,
526 .disconnect = ath3k_disconnect,
527 .id_table = ath3k_table,
528 .disable_hub_initiated_lpm = 1,
529};
530
531module_usb_driver(ath3k_driver);
532
533MODULE_AUTHOR("Atheros Communications");
534MODULE_DESCRIPTION("Atheros AR30xx firmware driver");
535MODULE_VERSION(VERSION);
536MODULE_LICENSE("GPL");
537MODULE_FIRMWARE(ATH3K_FIRMWARE);
1/*
2 * Copyright (c) 2008-2009 Atheros Communications Inc.
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; either version 2 of the License, or
7 * (at your option) any later version.
8 *
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 *
18 */
19
20
21#include <linux/module.h>
22#include <linux/kernel.h>
23#include <linux/init.h>
24#include <linux/slab.h>
25#include <linux/types.h>
26#include <linux/errno.h>
27#include <linux/device.h>
28#include <linux/firmware.h>
29#include <linux/usb.h>
30#include <net/bluetooth/bluetooth.h>
31
32#define VERSION "1.0"
33#define ATH3K_FIRMWARE "ath3k-1.fw"
34
35#define ATH3K_DNLOAD 0x01
36#define ATH3K_GETSTATE 0x05
37#define ATH3K_SET_NORMAL_MODE 0x07
38#define ATH3K_GETVERSION 0x09
39#define USB_REG_SWITCH_VID_PID 0x0a
40
41#define ATH3K_MODE_MASK 0x3F
42#define ATH3K_NORMAL_MODE 0x0E
43
44#define ATH3K_PATCH_UPDATE 0x80
45#define ATH3K_SYSCFG_UPDATE 0x40
46
47#define ATH3K_XTAL_FREQ_26M 0x00
48#define ATH3K_XTAL_FREQ_40M 0x01
49#define ATH3K_XTAL_FREQ_19P2 0x02
50#define ATH3K_NAME_LEN 0xFF
51
52struct ath3k_version {
53 unsigned int rom_version;
54 unsigned int build_version;
55 unsigned int ram_version;
56 unsigned char ref_clock;
57 unsigned char reserved[0x07];
58};
59
60static struct usb_device_id ath3k_table[] = {
61 /* Atheros AR3011 */
62 { USB_DEVICE(0x0CF3, 0x3000) },
63
64 /* Atheros AR3011 with sflash firmware*/
65 { USB_DEVICE(0x0CF3, 0x3002) },
66 { USB_DEVICE(0x0CF3, 0xE019) },
67 { USB_DEVICE(0x13d3, 0x3304) },
68 { USB_DEVICE(0x0930, 0x0215) },
69 { USB_DEVICE(0x0489, 0xE03D) },
70
71 /* Atheros AR9285 Malbec with sflash firmware */
72 { USB_DEVICE(0x03F0, 0x311D) },
73
74 /* Atheros AR3012 with sflash firmware*/
75 { USB_DEVICE(0x0CF3, 0x3004) },
76 { USB_DEVICE(0x0CF3, 0x311D) },
77 { USB_DEVICE(0x13d3, 0x3375) },
78 { USB_DEVICE(0x04CA, 0x3005) },
79 { USB_DEVICE(0x13d3, 0x3362) },
80 { USB_DEVICE(0x0CF3, 0xE004) },
81 { USB_DEVICE(0x0930, 0x0219) },
82 { USB_DEVICE(0x0489, 0xe057) },
83
84 /* Atheros AR5BBU12 with sflash firmware */
85 { USB_DEVICE(0x0489, 0xE02C) },
86
87 /* Atheros AR5BBU22 with sflash firmware */
88 { USB_DEVICE(0x0489, 0xE03C) },
89 { USB_DEVICE(0x0489, 0xE036) },
90
91 { } /* Terminating entry */
92};
93
94MODULE_DEVICE_TABLE(usb, ath3k_table);
95
96#define BTUSB_ATH3012 0x80
97/* This table is to load patch and sysconfig files
98 * for AR3012 */
99static struct usb_device_id ath3k_blist_tbl[] = {
100
101 /* Atheros AR3012 with sflash firmware*/
102 { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
103 { USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
104 { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
105 { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
106 { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
107 { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
108 { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
109 { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
110
111 /* Atheros AR5BBU22 with sflash firmware */
112 { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
113 { USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 },
114
115 { } /* Terminating entry */
116};
117
118#define USB_REQ_DFU_DNLOAD 1
119#define BULK_SIZE 4096
120#define FW_HDR_SIZE 20
121
122static int ath3k_load_firmware(struct usb_device *udev,
123 const struct firmware *firmware)
124{
125 u8 *send_buf;
126 int err, pipe, len, size, sent = 0;
127 int count = firmware->size;
128
129 BT_DBG("udev %p", udev);
130
131 pipe = usb_sndctrlpipe(udev, 0);
132
133 send_buf = kmalloc(BULK_SIZE, GFP_KERNEL);
134 if (!send_buf) {
135 BT_ERR("Can't allocate memory chunk for firmware");
136 return -ENOMEM;
137 }
138
139 memcpy(send_buf, firmware->data, 20);
140 if ((err = usb_control_msg(udev, pipe,
141 USB_REQ_DFU_DNLOAD,
142 USB_TYPE_VENDOR, 0, 0,
143 send_buf, 20, USB_CTRL_SET_TIMEOUT)) < 0) {
144 BT_ERR("Can't change to loading configuration err");
145 goto error;
146 }
147 sent += 20;
148 count -= 20;
149
150 while (count) {
151 size = min_t(uint, count, BULK_SIZE);
152 pipe = usb_sndbulkpipe(udev, 0x02);
153 memcpy(send_buf, firmware->data + sent, size);
154
155 err = usb_bulk_msg(udev, pipe, send_buf, size,
156 &len, 3000);
157
158 if (err || (len != size)) {
159 BT_ERR("Error in firmware loading err = %d,"
160 "len = %d, size = %d", err, len, size);
161 goto error;
162 }
163
164 sent += size;
165 count -= size;
166 }
167
168error:
169 kfree(send_buf);
170 return err;
171}
172
173static int ath3k_get_state(struct usb_device *udev, unsigned char *state)
174{
175 int pipe = 0;
176
177 pipe = usb_rcvctrlpipe(udev, 0);
178 return usb_control_msg(udev, pipe, ATH3K_GETSTATE,
179 USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
180 state, 0x01, USB_CTRL_SET_TIMEOUT);
181}
182
183static int ath3k_get_version(struct usb_device *udev,
184 struct ath3k_version *version)
185{
186 int pipe = 0;
187
188 pipe = usb_rcvctrlpipe(udev, 0);
189 return usb_control_msg(udev, pipe, ATH3K_GETVERSION,
190 USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, version,
191 sizeof(struct ath3k_version),
192 USB_CTRL_SET_TIMEOUT);
193}
194
195static int ath3k_load_fwfile(struct usb_device *udev,
196 const struct firmware *firmware)
197{
198 u8 *send_buf;
199 int err, pipe, len, size, count, sent = 0;
200 int ret;
201
202 count = firmware->size;
203
204 send_buf = kmalloc(BULK_SIZE, GFP_KERNEL);
205 if (!send_buf) {
206 BT_ERR("Can't allocate memory chunk for firmware");
207 return -ENOMEM;
208 }
209
210 size = min_t(uint, count, FW_HDR_SIZE);
211 memcpy(send_buf, firmware->data, size);
212
213 pipe = usb_sndctrlpipe(udev, 0);
214 ret = usb_control_msg(udev, pipe, ATH3K_DNLOAD,
215 USB_TYPE_VENDOR, 0, 0, send_buf,
216 size, USB_CTRL_SET_TIMEOUT);
217 if (ret < 0) {
218 BT_ERR("Can't change to loading configuration err");
219 kfree(send_buf);
220 return ret;
221 }
222
223 sent += size;
224 count -= size;
225
226 while (count) {
227 size = min_t(uint, count, BULK_SIZE);
228 pipe = usb_sndbulkpipe(udev, 0x02);
229
230 memcpy(send_buf, firmware->data + sent, size);
231
232 err = usb_bulk_msg(udev, pipe, send_buf, size,
233 &len, 3000);
234 if (err || (len != size)) {
235 BT_ERR("Error in firmware loading err = %d,"
236 "len = %d, size = %d", err, len, size);
237 kfree(send_buf);
238 return err;
239 }
240 sent += size;
241 count -= size;
242 }
243
244 kfree(send_buf);
245 return 0;
246}
247
248static int ath3k_switch_pid(struct usb_device *udev)
249{
250 int pipe = 0;
251
252 pipe = usb_sndctrlpipe(udev, 0);
253 return usb_control_msg(udev, pipe, USB_REG_SWITCH_VID_PID,
254 USB_TYPE_VENDOR, 0, 0,
255 NULL, 0, USB_CTRL_SET_TIMEOUT);
256}
257
258static int ath3k_set_normal_mode(struct usb_device *udev)
259{
260 unsigned char fw_state;
261 int pipe = 0, ret;
262
263 ret = ath3k_get_state(udev, &fw_state);
264 if (ret < 0) {
265 BT_ERR("Can't get state to change to normal mode err");
266 return ret;
267 }
268
269 if ((fw_state & ATH3K_MODE_MASK) == ATH3K_NORMAL_MODE) {
270 BT_DBG("firmware was already in normal mode");
271 return 0;
272 }
273
274 pipe = usb_sndctrlpipe(udev, 0);
275 return usb_control_msg(udev, pipe, ATH3K_SET_NORMAL_MODE,
276 USB_TYPE_VENDOR, 0, 0,
277 NULL, 0, USB_CTRL_SET_TIMEOUT);
278}
279
280static int ath3k_load_patch(struct usb_device *udev)
281{
282 unsigned char fw_state;
283 char filename[ATH3K_NAME_LEN] = {0};
284 const struct firmware *firmware;
285 struct ath3k_version fw_version, pt_version;
286 int ret;
287
288 ret = ath3k_get_state(udev, &fw_state);
289 if (ret < 0) {
290 BT_ERR("Can't get state to change to load ram patch err");
291 return ret;
292 }
293
294 if (fw_state & ATH3K_PATCH_UPDATE) {
295 BT_DBG("Patch was already downloaded");
296 return 0;
297 }
298
299 ret = ath3k_get_version(udev, &fw_version);
300 if (ret < 0) {
301 BT_ERR("Can't get version to change to load ram patch err");
302 return ret;
303 }
304
305 snprintf(filename, ATH3K_NAME_LEN, "ar3k/AthrBT_0x%08x.dfu",
306 fw_version.rom_version);
307
308 ret = request_firmware(&firmware, filename, &udev->dev);
309 if (ret < 0) {
310 BT_ERR("Patch file not found %s", filename);
311 return ret;
312 }
313
314 pt_version.rom_version = *(int *)(firmware->data + firmware->size - 8);
315 pt_version.build_version = *(int *)
316 (firmware->data + firmware->size - 4);
317
318 if ((pt_version.rom_version != fw_version.rom_version) ||
319 (pt_version.build_version <= fw_version.build_version)) {
320 BT_ERR("Patch file version did not match with firmware");
321 release_firmware(firmware);
322 return -EINVAL;
323 }
324
325 ret = ath3k_load_fwfile(udev, firmware);
326 release_firmware(firmware);
327
328 return ret;
329}
330
331static int ath3k_load_syscfg(struct usb_device *udev)
332{
333 unsigned char fw_state;
334 char filename[ATH3K_NAME_LEN] = {0};
335 const struct firmware *firmware;
336 struct ath3k_version fw_version;
337 int clk_value, ret;
338
339 ret = ath3k_get_state(udev, &fw_state);
340 if (ret < 0) {
341 BT_ERR("Can't get state to change to load configration err");
342 return -EBUSY;
343 }
344
345 ret = ath3k_get_version(udev, &fw_version);
346 if (ret < 0) {
347 BT_ERR("Can't get version to change to load ram patch err");
348 return ret;
349 }
350
351 switch (fw_version.ref_clock) {
352
353 case ATH3K_XTAL_FREQ_26M:
354 clk_value = 26;
355 break;
356 case ATH3K_XTAL_FREQ_40M:
357 clk_value = 40;
358 break;
359 case ATH3K_XTAL_FREQ_19P2:
360 clk_value = 19;
361 break;
362 default:
363 clk_value = 0;
364 break;
365 }
366
367 snprintf(filename, ATH3K_NAME_LEN, "ar3k/ramps_0x%08x_%d%s",
368 fw_version.rom_version, clk_value, ".dfu");
369
370 ret = request_firmware(&firmware, filename, &udev->dev);
371 if (ret < 0) {
372 BT_ERR("Configuration file not found %s", filename);
373 return ret;
374 }
375
376 ret = ath3k_load_fwfile(udev, firmware);
377 release_firmware(firmware);
378
379 return ret;
380}
381
382static int ath3k_probe(struct usb_interface *intf,
383 const struct usb_device_id *id)
384{
385 const struct firmware *firmware;
386 struct usb_device *udev = interface_to_usbdev(intf);
387 int ret;
388
389 BT_DBG("intf %p id %p", intf, id);
390
391 if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
392 return -ENODEV;
393
394 /* match device ID in ath3k blacklist table */
395 if (!id->driver_info) {
396 const struct usb_device_id *match;
397 match = usb_match_id(intf, ath3k_blist_tbl);
398 if (match)
399 id = match;
400 }
401
402 /* load patch and sysconfig files for AR3012 */
403 if (id->driver_info & BTUSB_ATH3012) {
404
405 /* New firmware with patch and sysconfig files already loaded */
406 if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x0001)
407 return -ENODEV;
408
409 ret = ath3k_load_patch(udev);
410 if (ret < 0) {
411 BT_ERR("Loading patch file failed");
412 return ret;
413 }
414 ret = ath3k_load_syscfg(udev);
415 if (ret < 0) {
416 BT_ERR("Loading sysconfig file failed");
417 return ret;
418 }
419 ret = ath3k_set_normal_mode(udev);
420 if (ret < 0) {
421 BT_ERR("Set normal mode failed");
422 return ret;
423 }
424 ath3k_switch_pid(udev);
425 return 0;
426 }
427
428 ret = request_firmware(&firmware, ATH3K_FIRMWARE, &udev->dev);
429 if (ret < 0) {
430 if (ret == -ENOENT)
431 BT_ERR("Firmware file \"%s\" not found",
432 ATH3K_FIRMWARE);
433 else
434 BT_ERR("Firmware file \"%s\" request failed (err=%d)",
435 ATH3K_FIRMWARE, ret);
436 return ret;
437 }
438
439 ret = ath3k_load_firmware(udev, firmware);
440 release_firmware(firmware);
441
442 return ret;
443}
444
445static void ath3k_disconnect(struct usb_interface *intf)
446{
447 BT_DBG("ath3k_disconnect intf %p", intf);
448}
449
450static struct usb_driver ath3k_driver = {
451 .name = "ath3k",
452 .probe = ath3k_probe,
453 .disconnect = ath3k_disconnect,
454 .id_table = ath3k_table,
455 .disable_hub_initiated_lpm = 1,
456};
457
458module_usb_driver(ath3k_driver);
459
460MODULE_AUTHOR("Atheros Communications");
461MODULE_DESCRIPTION("Atheros AR30xx firmware driver");
462MODULE_VERSION(VERSION);
463MODULE_LICENSE("GPL");
464MODULE_FIRMWARE(ATH3K_FIRMWARE);