Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * pm.c - Common OMAP2+ power management-related code
4 *
5 * Copyright (C) 2010 Texas Instruments, Inc.
6 * Copyright (C) 2010 Nokia Corporation
7 */
8
9#include <linux/kernel.h>
10#include <linux/init.h>
11#include <linux/io.h>
12#include <linux/err.h>
13#include <linux/pm_opp.h>
14#include <linux/export.h>
15#include <linux/suspend.h>
16#include <linux/clk.h>
17#include <linux/cpu.h>
18
19#include <asm/system_misc.h>
20
21#include "omap_device.h"
22#include "common.h"
23
24#include "soc.h"
25#include "prcm-common.h"
26#include "voltage.h"
27#include "powerdomain.h"
28#include "clockdomain.h"
29#include "pm.h"
30
31u32 enable_off_mode;
32
33#ifdef CONFIG_SUSPEND
34/*
35 * omap_pm_suspend: points to a function that does the SoC-specific
36 * suspend work
37 */
38static int (*omap_pm_suspend)(void);
39#endif
40
41#ifdef CONFIG_PM
42/**
43 * struct omap2_oscillator - Describe the board main oscillator latencies
44 * @startup_time: oscillator startup latency
45 * @shutdown_time: oscillator shutdown latency
46 */
47struct omap2_oscillator {
48 u32 startup_time;
49 u32 shutdown_time;
50};
51
52static struct omap2_oscillator oscillator = {
53 .startup_time = ULONG_MAX,
54 .shutdown_time = ULONG_MAX,
55};
56
57void omap_pm_get_oscillator(u32 *tstart, u32 *tshut)
58{
59 if (!tstart || !tshut)
60 return;
61
62 *tstart = oscillator.startup_time;
63 *tshut = oscillator.shutdown_time;
64}
65#endif
66
67int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused)
68{
69 clkdm_allow_idle(clkdm);
70 return 0;
71}
72
73#ifdef CONFIG_SUSPEND
74static int omap_pm_enter(suspend_state_t suspend_state)
75{
76 int ret = 0;
77
78 if (!omap_pm_suspend)
79 return -ENOENT; /* XXX doublecheck */
80
81 switch (suspend_state) {
82 case PM_SUSPEND_MEM:
83 ret = omap_pm_suspend();
84 break;
85 default:
86 ret = -EINVAL;
87 }
88
89 return ret;
90}
91
92static int omap_pm_begin(suspend_state_t state)
93{
94 cpu_idle_poll_ctrl(true);
95 if (soc_is_omap34xx())
96 omap_prcm_irq_prepare();
97 return 0;
98}
99
100static void omap_pm_end(void)
101{
102 cpu_idle_poll_ctrl(false);
103}
104
105static void omap_pm_wake(void)
106{
107 if (soc_is_omap34xx())
108 omap_prcm_irq_complete();
109}
110
111static const struct platform_suspend_ops omap_pm_ops = {
112 .begin = omap_pm_begin,
113 .end = omap_pm_end,
114 .enter = omap_pm_enter,
115 .wake = omap_pm_wake,
116 .valid = suspend_valid_only_mem,
117};
118
119/**
120 * omap_common_suspend_init - Set common suspend routines for OMAP SoCs
121 * @pm_suspend: function pointer to SoC specific suspend function
122 */
123void omap_common_suspend_init(void *pm_suspend)
124{
125 omap_pm_suspend = pm_suspend;
126 suspend_set_ops(&omap_pm_ops);
127}
128#endif /* CONFIG_SUSPEND */
129
130int __maybe_unused omap_pm_nop_init(void)
131{
132 return 0;
133}
134
135int (*omap_pm_soc_init)(void);
136
137static int __init omap2_common_pm_late_init(void)
138{
139 int error;
140
141 if (!omap_pm_soc_init)
142 return 0;
143
144 /* Init the voltage layer */
145 omap3_twl_init();
146 omap4_twl_init();
147 omap4_cpcap_init();
148 omap_voltage_late_init();
149
150 /* Smartreflex device init */
151 omap_devinit_smartreflex();
152
153 error = omap_pm_soc_init();
154 if (error)
155 pr_warn("%s: pm soc init failed: %i\n", __func__, error);
156
157 omap2_clk_enable_autoidle_all();
158
159 return 0;
160}
161omap_late_initcall(omap2_common_pm_late_init);
1/*
2 * pm.c - Common OMAP2+ power management-related code
3 *
4 * Copyright (C) 2010 Texas Instruments, Inc.
5 * Copyright (C) 2010 Nokia Corporation
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 */
11
12#include <linux/kernel.h>
13#include <linux/init.h>
14#include <linux/io.h>
15#include <linux/err.h>
16#include <linux/opp.h>
17#include <linux/export.h>
18#include <linux/suspend.h>
19
20#include <asm/system_misc.h>
21
22#include <plat/omap-pm.h>
23#include <plat/omap_device.h>
24#include "common.h"
25
26#include "prcm-common.h"
27#include "voltage.h"
28#include "powerdomain.h"
29#include "clockdomain.h"
30#include "pm.h"
31#include "twl-common.h"
32
33static struct omap_device_pm_latency *pm_lats;
34
35/*
36 * omap_pm_suspend: points to a function that does the SoC-specific
37 * suspend work
38 */
39int (*omap_pm_suspend)(void);
40
41static int __init _init_omap_device(char *name)
42{
43 struct omap_hwmod *oh;
44 struct platform_device *pdev;
45
46 oh = omap_hwmod_lookup(name);
47 if (WARN(!oh, "%s: could not find omap_hwmod for %s\n",
48 __func__, name))
49 return -ENODEV;
50
51 pdev = omap_device_build(oh->name, 0, oh, NULL, 0, pm_lats, 0, false);
52 if (WARN(IS_ERR(pdev), "%s: could not build omap_device for %s\n",
53 __func__, name))
54 return -ENODEV;
55
56 return 0;
57}
58
59/*
60 * Build omap_devices for processors and bus.
61 */
62static void __init omap2_init_processor_devices(void)
63{
64 _init_omap_device("mpu");
65 if (omap3_has_iva())
66 _init_omap_device("iva");
67
68 if (cpu_is_omap44xx()) {
69 _init_omap_device("l3_main_1");
70 _init_omap_device("dsp");
71 _init_omap_device("iva");
72 } else {
73 _init_omap_device("l3_main");
74 }
75}
76
77/* Types of sleep_switch used in omap_set_pwrdm_state */
78#define FORCEWAKEUP_SWITCH 0
79#define LOWPOWERSTATE_SWITCH 1
80
81int __init omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused)
82{
83 if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
84 clkdm_allow_idle(clkdm);
85 else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
86 atomic_read(&clkdm->usecount) == 0)
87 clkdm_sleep(clkdm);
88 return 0;
89}
90
91/*
92 * This sets pwrdm state (other than mpu & core. Currently only ON &
93 * RET are supported.
94 */
95int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 pwrst)
96{
97 u8 curr_pwrst, next_pwrst;
98 int sleep_switch = -1, ret = 0, hwsup = 0;
99
100 if (!pwrdm || IS_ERR(pwrdm))
101 return -EINVAL;
102
103 while (!(pwrdm->pwrsts & (1 << pwrst))) {
104 if (pwrst == PWRDM_POWER_OFF)
105 return ret;
106 pwrst--;
107 }
108
109 next_pwrst = pwrdm_read_next_pwrst(pwrdm);
110 if (next_pwrst == pwrst)
111 return ret;
112
113 curr_pwrst = pwrdm_read_pwrst(pwrdm);
114 if (curr_pwrst < PWRDM_POWER_ON) {
115 if ((curr_pwrst > pwrst) &&
116 (pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE)) {
117 sleep_switch = LOWPOWERSTATE_SWITCH;
118 } else {
119 hwsup = clkdm_in_hwsup(pwrdm->pwrdm_clkdms[0]);
120 clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
121 sleep_switch = FORCEWAKEUP_SWITCH;
122 }
123 }
124
125 ret = pwrdm_set_next_pwrst(pwrdm, pwrst);
126 if (ret)
127 pr_err("%s: unable to set power state of powerdomain: %s\n",
128 __func__, pwrdm->name);
129
130 switch (sleep_switch) {
131 case FORCEWAKEUP_SWITCH:
132 if (hwsup)
133 clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
134 else
135 clkdm_sleep(pwrdm->pwrdm_clkdms[0]);
136 break;
137 case LOWPOWERSTATE_SWITCH:
138 pwrdm_set_lowpwrstchange(pwrdm);
139 pwrdm_wait_transition(pwrdm);
140 pwrdm_state_switch(pwrdm);
141 break;
142 }
143
144 return ret;
145}
146
147
148
149/*
150 * This API is to be called during init to set the various voltage
151 * domains to the voltage as per the opp table. Typically we boot up
152 * at the nominal voltage. So this function finds out the rate of
153 * the clock associated with the voltage domain, finds out the correct
154 * opp entry and sets the voltage domain to the voltage specified
155 * in the opp entry
156 */
157static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
158 const char *oh_name)
159{
160 struct voltagedomain *voltdm;
161 struct clk *clk;
162 struct opp *opp;
163 unsigned long freq, bootup_volt;
164 struct device *dev;
165
166 if (!vdd_name || !clk_name || !oh_name) {
167 pr_err("%s: invalid parameters\n", __func__);
168 goto exit;
169 }
170
171 dev = omap_device_get_by_hwmod_name(oh_name);
172 if (IS_ERR(dev)) {
173 pr_err("%s: Unable to get dev pointer for hwmod %s\n",
174 __func__, oh_name);
175 goto exit;
176 }
177
178 voltdm = voltdm_lookup(vdd_name);
179 if (IS_ERR(voltdm)) {
180 pr_err("%s: unable to get vdd pointer for vdd_%s\n",
181 __func__, vdd_name);
182 goto exit;
183 }
184
185 clk = clk_get(NULL, clk_name);
186 if (IS_ERR(clk)) {
187 pr_err("%s: unable to get clk %s\n", __func__, clk_name);
188 goto exit;
189 }
190
191 freq = clk->rate;
192 clk_put(clk);
193
194 rcu_read_lock();
195 opp = opp_find_freq_ceil(dev, &freq);
196 if (IS_ERR(opp)) {
197 rcu_read_unlock();
198 pr_err("%s: unable to find boot up OPP for vdd_%s\n",
199 __func__, vdd_name);
200 goto exit;
201 }
202
203 bootup_volt = opp_get_voltage(opp);
204 rcu_read_unlock();
205 if (!bootup_volt) {
206 pr_err("%s: unable to find voltage corresponding "
207 "to the bootup OPP for vdd_%s\n", __func__, vdd_name);
208 goto exit;
209 }
210
211 voltdm_scale(voltdm, bootup_volt);
212 return 0;
213
214exit:
215 pr_err("%s: unable to set vdd_%s\n", __func__, vdd_name);
216 return -EINVAL;
217}
218
219#ifdef CONFIG_SUSPEND
220static int omap_pm_enter(suspend_state_t suspend_state)
221{
222 int ret = 0;
223
224 if (!omap_pm_suspend)
225 return -ENOENT; /* XXX doublecheck */
226
227 switch (suspend_state) {
228 case PM_SUSPEND_STANDBY:
229 case PM_SUSPEND_MEM:
230 ret = omap_pm_suspend();
231 break;
232 default:
233 ret = -EINVAL;
234 }
235
236 return ret;
237}
238
239static int omap_pm_begin(suspend_state_t state)
240{
241 disable_hlt();
242 if (cpu_is_omap34xx())
243 omap_prcm_irq_prepare();
244 return 0;
245}
246
247static void omap_pm_end(void)
248{
249 enable_hlt();
250 return;
251}
252
253static void omap_pm_finish(void)
254{
255 if (cpu_is_omap34xx())
256 omap_prcm_irq_complete();
257}
258
259static const struct platform_suspend_ops omap_pm_ops = {
260 .begin = omap_pm_begin,
261 .end = omap_pm_end,
262 .enter = omap_pm_enter,
263 .finish = omap_pm_finish,
264 .valid = suspend_valid_only_mem,
265};
266
267#endif /* CONFIG_SUSPEND */
268
269static void __init omap3_init_voltages(void)
270{
271 if (!cpu_is_omap34xx())
272 return;
273
274 omap2_set_init_voltage("mpu_iva", "dpll1_ck", "mpu");
275 omap2_set_init_voltage("core", "l3_ick", "l3_main");
276}
277
278static void __init omap4_init_voltages(void)
279{
280 if (!cpu_is_omap44xx())
281 return;
282
283 omap2_set_init_voltage("mpu", "dpll_mpu_ck", "mpu");
284 omap2_set_init_voltage("core", "l3_div_ck", "l3_main_1");
285 omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva");
286}
287
288static int __init omap2_common_pm_init(void)
289{
290 if (!of_have_populated_dt())
291 omap2_init_processor_devices();
292 omap_pm_if_init();
293
294 return 0;
295}
296postcore_initcall(omap2_common_pm_init);
297
298int __init omap2_common_pm_late_init(void)
299{
300 /*
301 * In the case of DT, the PMIC and SR initialization will be done using
302 * a completely different mechanism.
303 * Disable this part if a DT blob is available.
304 */
305 if (of_have_populated_dt())
306 return 0;
307
308 /* Init the voltage layer */
309 omap_pmic_late_init();
310 omap_voltage_late_init();
311
312 /* Initialize the voltages */
313 omap3_init_voltages();
314 omap4_init_voltages();
315
316 /* Smartreflex device init */
317 omap_devinit_smartreflex();
318
319#ifdef CONFIG_SUSPEND
320 suspend_set_ops(&omap_pm_ops);
321#endif
322
323 return 0;
324}