Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * MDIO bus driver for the Xilinx Axi Ethernet device
4 *
5 * Copyright (c) 2009 Secret Lab Technologies, Ltd.
6 * Copyright (c) 2010 - 2011 Michal Simek <monstr@monstr.eu>
7 * Copyright (c) 2010 - 2011 PetaLogix
8 * Copyright (c) 2019 SED Systems, a division of Calian Ltd.
9 * Copyright (c) 2010 - 2012 Xilinx, Inc. All rights reserved.
10 */
11
12#include <linux/clk.h>
13#include <linux/of_address.h>
14#include <linux/of_mdio.h>
15#include <linux/jiffies.h>
16#include <linux/iopoll.h>
17
18#include "xilinx_axienet.h"
19
20#define DEFAULT_MDIO_FREQ 2500000 /* 2.5 MHz */
21#define DEFAULT_HOST_CLOCK 150000000 /* 150 MHz */
22
23/**
24 * axienet_mdio_wait_until_ready - MDIO wait function
25 * @lp: Pointer to axienet local data structure.
26 *
27 * Return : 0 on success, Negative value on errors
28 *
29 * Wait till MDIO interface is ready to accept a new transaction.
30 */
31static int axienet_mdio_wait_until_ready(struct axienet_local *lp)
32{
33 u32 val;
34
35 return readx_poll_timeout(axinet_ior_read_mcr, lp,
36 val, val & XAE_MDIO_MCR_READY_MASK,
37 1, 20000);
38}
39
40/**
41 * axienet_mdio_mdc_enable - MDIO MDC enable function
42 * @lp: Pointer to axienet local data structure.
43 *
44 * Enable the MDIO MDC. Called prior to a read/write operation
45 */
46static void axienet_mdio_mdc_enable(struct axienet_local *lp)
47{
48 axienet_iow(lp, XAE_MDIO_MC_OFFSET,
49 ((u32)lp->mii_clk_div | XAE_MDIO_MC_MDIOEN_MASK));
50}
51
52/**
53 * axienet_mdio_mdc_disable - MDIO MDC disable function
54 * @lp: Pointer to axienet local data structure.
55 *
56 * Disable the MDIO MDC. Called after a read/write operation
57 */
58static void axienet_mdio_mdc_disable(struct axienet_local *lp)
59{
60 u32 mc_reg;
61
62 mc_reg = axienet_ior(lp, XAE_MDIO_MC_OFFSET);
63 axienet_iow(lp, XAE_MDIO_MC_OFFSET,
64 (mc_reg & ~XAE_MDIO_MC_MDIOEN_MASK));
65}
66
67/**
68 * axienet_mdio_read - MDIO interface read function
69 * @bus: Pointer to mii bus structure
70 * @phy_id: Address of the PHY device
71 * @reg: PHY register to read
72 *
73 * Return: The register contents on success, -ETIMEDOUT on a timeout
74 *
75 * Reads the contents of the requested register from the requested PHY
76 * address by first writing the details into MCR register. After a while
77 * the register MRD is read to obtain the PHY register content.
78 */
79static int axienet_mdio_read(struct mii_bus *bus, int phy_id, int reg)
80{
81 u32 rc;
82 int ret;
83 struct axienet_local *lp = bus->priv;
84
85 axienet_mdio_mdc_enable(lp);
86
87 ret = axienet_mdio_wait_until_ready(lp);
88 if (ret < 0) {
89 axienet_mdio_mdc_disable(lp);
90 return ret;
91 }
92
93 axienet_iow(lp, XAE_MDIO_MCR_OFFSET,
94 (((phy_id << XAE_MDIO_MCR_PHYAD_SHIFT) &
95 XAE_MDIO_MCR_PHYAD_MASK) |
96 ((reg << XAE_MDIO_MCR_REGAD_SHIFT) &
97 XAE_MDIO_MCR_REGAD_MASK) |
98 XAE_MDIO_MCR_INITIATE_MASK |
99 XAE_MDIO_MCR_OP_READ_MASK));
100
101 ret = axienet_mdio_wait_until_ready(lp);
102 if (ret < 0) {
103 axienet_mdio_mdc_disable(lp);
104 return ret;
105 }
106
107 rc = axienet_ior(lp, XAE_MDIO_MRD_OFFSET) & 0x0000FFFF;
108
109 dev_dbg(lp->dev, "axienet_mdio_read(phy_id=%i, reg=%x) == %x\n",
110 phy_id, reg, rc);
111
112 axienet_mdio_mdc_disable(lp);
113 return rc;
114}
115
116/**
117 * axienet_mdio_write - MDIO interface write function
118 * @bus: Pointer to mii bus structure
119 * @phy_id: Address of the PHY device
120 * @reg: PHY register to write to
121 * @val: Value to be written into the register
122 *
123 * Return: 0 on success, -ETIMEDOUT on a timeout
124 *
125 * Writes the value to the requested register by first writing the value
126 * into MWD register. The MCR register is then appropriately setup
127 * to finish the write operation.
128 */
129static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg,
130 u16 val)
131{
132 int ret;
133 struct axienet_local *lp = bus->priv;
134
135 dev_dbg(lp->dev, "axienet_mdio_write(phy_id=%i, reg=%x, val=%x)\n",
136 phy_id, reg, val);
137
138 axienet_mdio_mdc_enable(lp);
139
140 ret = axienet_mdio_wait_until_ready(lp);
141 if (ret < 0) {
142 axienet_mdio_mdc_disable(lp);
143 return ret;
144 }
145
146 axienet_iow(lp, XAE_MDIO_MWD_OFFSET, (u32)val);
147 axienet_iow(lp, XAE_MDIO_MCR_OFFSET,
148 (((phy_id << XAE_MDIO_MCR_PHYAD_SHIFT) &
149 XAE_MDIO_MCR_PHYAD_MASK) |
150 ((reg << XAE_MDIO_MCR_REGAD_SHIFT) &
151 XAE_MDIO_MCR_REGAD_MASK) |
152 XAE_MDIO_MCR_INITIATE_MASK |
153 XAE_MDIO_MCR_OP_WRITE_MASK));
154
155 ret = axienet_mdio_wait_until_ready(lp);
156 if (ret < 0) {
157 axienet_mdio_mdc_disable(lp);
158 return ret;
159 }
160 axienet_mdio_mdc_disable(lp);
161 return 0;
162}
163
164/**
165 * axienet_mdio_enable - MDIO hardware setup function
166 * @lp: Pointer to axienet local data structure.
167 * @np: Pointer to mdio device tree node.
168 *
169 * Return: 0 on success, -ETIMEDOUT on a timeout, -EOVERFLOW on a clock
170 * divisor overflow.
171 *
172 * Sets up the MDIO interface by initializing the MDIO clock and enabling the
173 * MDIO interface in hardware.
174 **/
175static int axienet_mdio_enable(struct axienet_local *lp, struct device_node *np)
176{
177 u32 mdio_freq = DEFAULT_MDIO_FREQ;
178 u32 host_clock;
179 u32 clk_div;
180 int ret;
181
182 lp->mii_clk_div = 0;
183
184 if (lp->axi_clk) {
185 host_clock = clk_get_rate(lp->axi_clk);
186 } else {
187 struct device_node *np1;
188
189 /* Legacy fallback: detect CPU clock frequency and use as AXI
190 * bus clock frequency. This only works on certain platforms.
191 */
192 np1 = of_find_node_by_name(NULL, "cpu");
193 if (!np1) {
194 netdev_warn(lp->ndev, "Could not find CPU device node.\n");
195 host_clock = DEFAULT_HOST_CLOCK;
196 } else {
197 int ret = of_property_read_u32(np1, "clock-frequency",
198 &host_clock);
199 if (ret) {
200 netdev_warn(lp->ndev, "CPU clock-frequency property not found.\n");
201 host_clock = DEFAULT_HOST_CLOCK;
202 }
203 of_node_put(np1);
204 }
205 netdev_info(lp->ndev, "Setting assumed host clock to %u\n",
206 host_clock);
207 }
208
209 if (np)
210 of_property_read_u32(np, "clock-frequency", &mdio_freq);
211 if (mdio_freq != DEFAULT_MDIO_FREQ)
212 netdev_info(lp->ndev, "Setting non-standard mdio bus frequency to %u Hz\n",
213 mdio_freq);
214
215 /* clk_div can be calculated by deriving it from the equation:
216 * fMDIO = fHOST / ((1 + clk_div) * 2)
217 *
218 * Where fMDIO <= 2500000, so we get:
219 * fHOST / ((1 + clk_div) * 2) <= 2500000
220 *
221 * Then we get:
222 * 1 / ((1 + clk_div) * 2) <= (2500000 / fHOST)
223 *
224 * Then we get:
225 * 1 / (1 + clk_div) <= ((2500000 * 2) / fHOST)
226 *
227 * Then we get:
228 * 1 / (1 + clk_div) <= (5000000 / fHOST)
229 *
230 * So:
231 * (1 + clk_div) >= (fHOST / 5000000)
232 *
233 * And finally:
234 * clk_div >= (fHOST / 5000000) - 1
235 *
236 * fHOST can be read from the flattened device tree as property
237 * "clock-frequency" from the CPU
238 */
239
240 clk_div = (host_clock / (mdio_freq * 2)) - 1;
241 /* If there is any remainder from the division of
242 * fHOST / (mdio_freq * 2), then we need to add
243 * 1 to the clock divisor or we will surely be
244 * above the requested frequency
245 */
246 if (host_clock % (mdio_freq * 2))
247 clk_div++;
248
249 /* Check for overflow of mii_clk_div */
250 if (clk_div & ~XAE_MDIO_MC_CLOCK_DIVIDE_MAX) {
251 netdev_warn(lp->ndev, "MDIO clock divisor overflow\n");
252 return -EOVERFLOW;
253 }
254 lp->mii_clk_div = (u8)clk_div;
255
256 netdev_dbg(lp->ndev,
257 "Setting MDIO clock divisor to %u/%u Hz host clock.\n",
258 lp->mii_clk_div, host_clock);
259
260 axienet_mdio_mdc_enable(lp);
261
262 ret = axienet_mdio_wait_until_ready(lp);
263 if (ret)
264 axienet_mdio_mdc_disable(lp);
265
266 return ret;
267}
268
269/**
270 * axienet_mdio_setup - MDIO setup function
271 * @lp: Pointer to axienet local data structure.
272 *
273 * Return: 0 on success, -ETIMEDOUT on a timeout, -EOVERFLOW on a clock
274 * divisor overflow, -ENOMEM when mdiobus_alloc (to allocate
275 * memory for mii bus structure) fails.
276 *
277 * Sets up the MDIO interface by initializing the MDIO clock.
278 * Register the MDIO interface.
279 **/
280int axienet_mdio_setup(struct axienet_local *lp)
281{
282 struct device_node *mdio_node;
283 struct mii_bus *bus;
284 int ret;
285
286 bus = mdiobus_alloc();
287 if (!bus)
288 return -ENOMEM;
289
290 snprintf(bus->id, MII_BUS_ID_SIZE, "axienet-%.8llx",
291 (unsigned long long)lp->regs_start);
292
293 bus->priv = lp;
294 bus->name = "Xilinx Axi Ethernet MDIO";
295 bus->read = axienet_mdio_read;
296 bus->write = axienet_mdio_write;
297 bus->parent = lp->dev;
298 lp->mii_bus = bus;
299
300 mdio_node = of_get_child_by_name(lp->dev->of_node, "mdio");
301 ret = axienet_mdio_enable(lp, mdio_node);
302 if (ret < 0)
303 goto unregister;
304 ret = of_mdiobus_register(bus, mdio_node);
305 if (ret)
306 goto unregister_mdio_enabled;
307 of_node_put(mdio_node);
308 axienet_mdio_mdc_disable(lp);
309 return 0;
310
311unregister_mdio_enabled:
312 axienet_mdio_mdc_disable(lp);
313unregister:
314 of_node_put(mdio_node);
315 mdiobus_free(bus);
316 lp->mii_bus = NULL;
317 return ret;
318}
319
320/**
321 * axienet_mdio_teardown - MDIO remove function
322 * @lp: Pointer to axienet local data structure.
323 *
324 * Unregisters the MDIO and frees any associate memory for mii bus.
325 */
326void axienet_mdio_teardown(struct axienet_local *lp)
327{
328 mdiobus_unregister(lp->mii_bus);
329 mdiobus_free(lp->mii_bus);
330 lp->mii_bus = NULL;
331}
1/*
2 * MDIO bus driver for the Xilinx Axi Ethernet device
3 *
4 * Copyright (c) 2009 Secret Lab Technologies, Ltd.
5 * Copyright (c) 2010 - 2011 Michal Simek <monstr@monstr.eu>
6 * Copyright (c) 2010 - 2011 PetaLogix
7 * Copyright (c) 2010 - 2012 Xilinx, Inc. All rights reserved.
8 */
9
10#include <linux/of_address.h>
11#include <linux/of_mdio.h>
12#include <linux/jiffies.h>
13
14#include "xilinx_axienet.h"
15
16#define MAX_MDIO_FREQ 2500000 /* 2.5 MHz */
17#define DEFAULT_CLOCK_DIVISOR XAE_MDIO_DIV_DFT
18
19/* Wait till MDIO interface is ready to accept a new transaction.*/
20int axienet_mdio_wait_until_ready(struct axienet_local *lp)
21{
22 long end = jiffies + 2;
23 while (!(axienet_ior(lp, XAE_MDIO_MCR_OFFSET) &
24 XAE_MDIO_MCR_READY_MASK)) {
25 if (end - jiffies <= 0) {
26 WARN_ON(1);
27 return -ETIMEDOUT;
28 }
29 udelay(1);
30 }
31 return 0;
32}
33
34/**
35 * axienet_mdio_read - MDIO interface read function
36 * @bus: Pointer to mii bus structure
37 * @phy_id: Address of the PHY device
38 * @reg: PHY register to read
39 *
40 * returns: The register contents on success, -ETIMEDOUT on a timeout
41 *
42 * Reads the contents of the requested register from the requested PHY
43 * address by first writing the details into MCR register. After a while
44 * the register MRD is read to obtain the PHY register content.
45 */
46static int axienet_mdio_read(struct mii_bus *bus, int phy_id, int reg)
47{
48 u32 rc;
49 int ret;
50 struct axienet_local *lp = bus->priv;
51
52 ret = axienet_mdio_wait_until_ready(lp);
53 if (ret < 0)
54 return ret;
55
56 axienet_iow(lp, XAE_MDIO_MCR_OFFSET,
57 (((phy_id << XAE_MDIO_MCR_PHYAD_SHIFT) &
58 XAE_MDIO_MCR_PHYAD_MASK) |
59 ((reg << XAE_MDIO_MCR_REGAD_SHIFT) &
60 XAE_MDIO_MCR_REGAD_MASK) |
61 XAE_MDIO_MCR_INITIATE_MASK |
62 XAE_MDIO_MCR_OP_READ_MASK));
63
64 ret = axienet_mdio_wait_until_ready(lp);
65 if (ret < 0)
66 return ret;
67
68 rc = axienet_ior(lp, XAE_MDIO_MRD_OFFSET) & 0x0000FFFF;
69
70 dev_dbg(lp->dev, "axienet_mdio_read(phy_id=%i, reg=%x) == %x\n",
71 phy_id, reg, rc);
72
73 return rc;
74}
75
76/**
77 * axienet_mdio_write - MDIO interface write function
78 * @bus: Pointer to mii bus structure
79 * @phy_id: Address of the PHY device
80 * @reg: PHY register to write to
81 * @val: Value to be written into the register
82 *
83 * returns: 0 on success, -ETIMEDOUT on a timeout
84 *
85 * Writes the value to the requested register by first writing the value
86 * into MWD register. The the MCR register is then appropriately setup
87 * to finish the write operation.
88 */
89static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg,
90 u16 val)
91{
92 int ret;
93 struct axienet_local *lp = bus->priv;
94
95 dev_dbg(lp->dev, "axienet_mdio_write(phy_id=%i, reg=%x, val=%x)\n",
96 phy_id, reg, val);
97
98 ret = axienet_mdio_wait_until_ready(lp);
99 if (ret < 0)
100 return ret;
101
102 axienet_iow(lp, XAE_MDIO_MWD_OFFSET, (u32) val);
103 axienet_iow(lp, XAE_MDIO_MCR_OFFSET,
104 (((phy_id << XAE_MDIO_MCR_PHYAD_SHIFT) &
105 XAE_MDIO_MCR_PHYAD_MASK) |
106 ((reg << XAE_MDIO_MCR_REGAD_SHIFT) &
107 XAE_MDIO_MCR_REGAD_MASK) |
108 XAE_MDIO_MCR_INITIATE_MASK |
109 XAE_MDIO_MCR_OP_WRITE_MASK));
110
111 ret = axienet_mdio_wait_until_ready(lp);
112 if (ret < 0)
113 return ret;
114 return 0;
115}
116
117/**
118 * axienet_mdio_setup - MDIO setup function
119 * @lp: Pointer to axienet local data structure.
120 * @np: Pointer to device node
121 *
122 * returns: 0 on success, -ETIMEDOUT on a timeout, -ENOMEM when
123 * mdiobus_alloc (to allocate memory for mii bus structure) fails.
124 *
125 * Sets up the MDIO interface by initializing the MDIO clock and enabling the
126 * MDIO interface in hardware. Register the MDIO interface.
127 **/
128int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np)
129{
130 int ret;
131 u32 clk_div, host_clock;
132 u32 *property_p;
133 struct mii_bus *bus;
134 struct resource res;
135 struct device_node *np1;
136
137 /* clk_div can be calculated by deriving it from the equation:
138 * fMDIO = fHOST / ((1 + clk_div) * 2)
139 *
140 * Where fMDIO <= 2500000, so we get:
141 * fHOST / ((1 + clk_div) * 2) <= 2500000
142 *
143 * Then we get:
144 * 1 / ((1 + clk_div) * 2) <= (2500000 / fHOST)
145 *
146 * Then we get:
147 * 1 / (1 + clk_div) <= ((2500000 * 2) / fHOST)
148 *
149 * Then we get:
150 * 1 / (1 + clk_div) <= (5000000 / fHOST)
151 *
152 * So:
153 * (1 + clk_div) >= (fHOST / 5000000)
154 *
155 * And finally:
156 * clk_div >= (fHOST / 5000000) - 1
157 *
158 * fHOST can be read from the flattened device tree as property
159 * "clock-frequency" from the CPU
160 */
161
162 np1 = of_find_node_by_name(NULL, "cpu");
163 if (!np1) {
164 printk(KERN_WARNING "%s(): Could not find CPU device node.",
165 __func__);
166 printk(KERN_WARNING "Setting MDIO clock divisor to "
167 "default %d\n", DEFAULT_CLOCK_DIVISOR);
168 clk_div = DEFAULT_CLOCK_DIVISOR;
169 goto issue;
170 }
171 property_p = (u32 *) of_get_property(np1, "clock-frequency", NULL);
172 if (!property_p) {
173 printk(KERN_WARNING "%s(): Could not find CPU property: "
174 "clock-frequency.", __func__);
175 printk(KERN_WARNING "Setting MDIO clock divisor to "
176 "default %d\n", DEFAULT_CLOCK_DIVISOR);
177 clk_div = DEFAULT_CLOCK_DIVISOR;
178 of_node_put(np1);
179 goto issue;
180 }
181
182 host_clock = be32_to_cpup(property_p);
183 clk_div = (host_clock / (MAX_MDIO_FREQ * 2)) - 1;
184 /* If there is any remainder from the division of
185 * fHOST / (MAX_MDIO_FREQ * 2), then we need to add
186 * 1 to the clock divisor or we will surely be above 2.5 MHz */
187 if (host_clock % (MAX_MDIO_FREQ * 2))
188 clk_div++;
189
190 printk(KERN_DEBUG "%s(): Setting MDIO clock divisor to %u based "
191 "on %u Hz host clock.\n", __func__, clk_div, host_clock);
192
193 of_node_put(np1);
194issue:
195 axienet_iow(lp, XAE_MDIO_MC_OFFSET,
196 (((u32) clk_div) | XAE_MDIO_MC_MDIOEN_MASK));
197
198 ret = axienet_mdio_wait_until_ready(lp);
199 if (ret < 0)
200 return ret;
201
202 bus = mdiobus_alloc();
203 if (!bus)
204 return -ENOMEM;
205
206 np1 = of_get_parent(lp->phy_node);
207 of_address_to_resource(np1, 0, &res);
208 snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx",
209 (unsigned long long) res.start);
210
211 bus->priv = lp;
212 bus->name = "Xilinx Axi Ethernet MDIO";
213 bus->read = axienet_mdio_read;
214 bus->write = axienet_mdio_write;
215 bus->parent = lp->dev;
216 bus->irq = lp->mdio_irqs; /* preallocated IRQ table */
217 lp->mii_bus = bus;
218
219 ret = of_mdiobus_register(bus, np1);
220 if (ret) {
221 mdiobus_free(bus);
222 return ret;
223 }
224 return 0;
225}
226
227/**
228 * axienet_mdio_teardown - MDIO remove function
229 * @lp: Pointer to axienet local data structure.
230 *
231 * Unregisters the MDIO and frees any associate memory for mii bus.
232 */
233void axienet_mdio_teardown(struct axienet_local *lp)
234{
235 mdiobus_unregister(lp->mii_bus);
236 kfree(lp->mii_bus->irq);
237 mdiobus_free(lp->mii_bus);
238 lp->mii_bus = NULL;
239}