Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * ALPS touchpad PS/2 mouse driver
4 *
5 * Copyright (c) 2003 Neil Brown <neilb@cse.unsw.edu.au>
6 * Copyright (c) 2003-2005 Peter Osterlund <petero2@telia.com>
7 * Copyright (c) 2004 Dmitry Torokhov <dtor@mail.ru>
8 * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
9 * Copyright (c) 2009 Sebastian Kapfer <sebastian_kapfer@gmx.net>
10 *
11 * ALPS detection, tap switching and status querying info is taken from
12 * tpconfig utility (by C. Scott Ananian and Bruce Kall).
13 */
14
15#include <linux/slab.h>
16#include <linux/input.h>
17#include <linux/input/mt.h>
18#include <linux/serio.h>
19#include <linux/libps2.h>
20#include <linux/dmi.h>
21
22#include "psmouse.h"
23#include "alps.h"
24#include "trackpoint.h"
25
26/*
27 * Definitions for ALPS version 3 and 4 command mode protocol
28 */
29#define ALPS_CMD_NIBBLE_10 0x01f2
30
31#define ALPS_REG_BASE_RUSHMORE 0xc2c0
32#define ALPS_REG_BASE_V7 0xc2c0
33#define ALPS_REG_BASE_PINNACLE 0x0000
34
35static const struct alps_nibble_commands alps_v3_nibble_commands[] = {
36 { PSMOUSE_CMD_SETPOLL, 0x00 }, /* 0 */
37 { PSMOUSE_CMD_RESET_DIS, 0x00 }, /* 1 */
38 { PSMOUSE_CMD_SETSCALE21, 0x00 }, /* 2 */
39 { PSMOUSE_CMD_SETRATE, 0x0a }, /* 3 */
40 { PSMOUSE_CMD_SETRATE, 0x14 }, /* 4 */
41 { PSMOUSE_CMD_SETRATE, 0x28 }, /* 5 */
42 { PSMOUSE_CMD_SETRATE, 0x3c }, /* 6 */
43 { PSMOUSE_CMD_SETRATE, 0x50 }, /* 7 */
44 { PSMOUSE_CMD_SETRATE, 0x64 }, /* 8 */
45 { PSMOUSE_CMD_SETRATE, 0xc8 }, /* 9 */
46 { ALPS_CMD_NIBBLE_10, 0x00 }, /* a */
47 { PSMOUSE_CMD_SETRES, 0x00 }, /* b */
48 { PSMOUSE_CMD_SETRES, 0x01 }, /* c */
49 { PSMOUSE_CMD_SETRES, 0x02 }, /* d */
50 { PSMOUSE_CMD_SETRES, 0x03 }, /* e */
51 { PSMOUSE_CMD_SETSCALE11, 0x00 }, /* f */
52};
53
54static const struct alps_nibble_commands alps_v4_nibble_commands[] = {
55 { PSMOUSE_CMD_ENABLE, 0x00 }, /* 0 */
56 { PSMOUSE_CMD_RESET_DIS, 0x00 }, /* 1 */
57 { PSMOUSE_CMD_SETSCALE21, 0x00 }, /* 2 */
58 { PSMOUSE_CMD_SETRATE, 0x0a }, /* 3 */
59 { PSMOUSE_CMD_SETRATE, 0x14 }, /* 4 */
60 { PSMOUSE_CMD_SETRATE, 0x28 }, /* 5 */
61 { PSMOUSE_CMD_SETRATE, 0x3c }, /* 6 */
62 { PSMOUSE_CMD_SETRATE, 0x50 }, /* 7 */
63 { PSMOUSE_CMD_SETRATE, 0x64 }, /* 8 */
64 { PSMOUSE_CMD_SETRATE, 0xc8 }, /* 9 */
65 { ALPS_CMD_NIBBLE_10, 0x00 }, /* a */
66 { PSMOUSE_CMD_SETRES, 0x00 }, /* b */
67 { PSMOUSE_CMD_SETRES, 0x01 }, /* c */
68 { PSMOUSE_CMD_SETRES, 0x02 }, /* d */
69 { PSMOUSE_CMD_SETRES, 0x03 }, /* e */
70 { PSMOUSE_CMD_SETSCALE11, 0x00 }, /* f */
71};
72
73static const struct alps_nibble_commands alps_v6_nibble_commands[] = {
74 { PSMOUSE_CMD_ENABLE, 0x00 }, /* 0 */
75 { PSMOUSE_CMD_SETRATE, 0x0a }, /* 1 */
76 { PSMOUSE_CMD_SETRATE, 0x14 }, /* 2 */
77 { PSMOUSE_CMD_SETRATE, 0x28 }, /* 3 */
78 { PSMOUSE_CMD_SETRATE, 0x3c }, /* 4 */
79 { PSMOUSE_CMD_SETRATE, 0x50 }, /* 5 */
80 { PSMOUSE_CMD_SETRATE, 0x64 }, /* 6 */
81 { PSMOUSE_CMD_SETRATE, 0xc8 }, /* 7 */
82 { PSMOUSE_CMD_GETID, 0x00 }, /* 8 */
83 { PSMOUSE_CMD_GETINFO, 0x00 }, /* 9 */
84 { PSMOUSE_CMD_SETRES, 0x00 }, /* a */
85 { PSMOUSE_CMD_SETRES, 0x01 }, /* b */
86 { PSMOUSE_CMD_SETRES, 0x02 }, /* c */
87 { PSMOUSE_CMD_SETRES, 0x03 }, /* d */
88 { PSMOUSE_CMD_SETSCALE21, 0x00 }, /* e */
89 { PSMOUSE_CMD_SETSCALE11, 0x00 }, /* f */
90};
91
92
93#define ALPS_DUALPOINT 0x02 /* touchpad has trackstick */
94#define ALPS_PASS 0x04 /* device has a pass-through port */
95
96#define ALPS_WHEEL 0x08 /* hardware wheel present */
97#define ALPS_FW_BK_1 0x10 /* front & back buttons present */
98#define ALPS_FW_BK_2 0x20 /* front & back buttons present */
99#define ALPS_FOUR_BUTTONS 0x40 /* 4 direction button present */
100#define ALPS_PS2_INTERLEAVED 0x80 /* 3-byte PS/2 packet interleaved with
101 6-byte ALPS packet */
102#define ALPS_STICK_BITS 0x100 /* separate stick button bits */
103#define ALPS_BUTTONPAD 0x200 /* device is a clickpad */
104#define ALPS_DUALPOINT_WITH_PRESSURE 0x400 /* device can report trackpoint pressure */
105
106static const struct alps_model_info alps_model_data[] = {
107 /*
108 * XXX This entry is suspicious. First byte has zero lower nibble,
109 * which is what a normal mouse would report. Also, the value 0x0e
110 * isn't valid per PS/2 spec.
111 */
112 { { 0x20, 0x02, 0x0e }, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT } },
113
114 { { 0x22, 0x02, 0x0a }, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT } },
115 { { 0x22, 0x02, 0x14 }, { ALPS_PROTO_V2, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT } }, /* Dell Latitude D600 */
116 { { 0x32, 0x02, 0x14 }, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT } }, /* Toshiba Salellite Pro M10 */
117 { { 0x33, 0x02, 0x0a }, { ALPS_PROTO_V1, 0x88, 0xf8, 0 } }, /* UMAX-530T */
118 { { 0x52, 0x01, 0x14 }, { ALPS_PROTO_V2, 0xff, 0xff,
119 ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED } }, /* Toshiba Tecra A11-11L */
120 { { 0x53, 0x02, 0x0a }, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } },
121 { { 0x53, 0x02, 0x14 }, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } },
122 { { 0x60, 0x03, 0xc8 }, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } }, /* HP ze1115 */
123 { { 0x62, 0x02, 0x14 }, { ALPS_PROTO_V2, 0xcf, 0xcf,
124 ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED } }, /* Dell Latitude E5500, E6400, E6500, Precision M4400 */
125 { { 0x63, 0x02, 0x0a }, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } },
126 { { 0x63, 0x02, 0x14 }, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } },
127 { { 0x63, 0x02, 0x28 }, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_FW_BK_2 } }, /* Fujitsu Siemens S6010 */
128 { { 0x63, 0x02, 0x3c }, { ALPS_PROTO_V2, 0x8f, 0x8f, ALPS_WHEEL } }, /* Toshiba Satellite S2400-103 */
129 { { 0x63, 0x02, 0x50 }, { ALPS_PROTO_V2, 0xef, 0xef, ALPS_FW_BK_1 } }, /* NEC Versa L320 */
130 { { 0x63, 0x02, 0x64 }, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } },
131 { { 0x63, 0x03, 0xc8 }, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT } }, /* Dell Latitude D800 */
132 { { 0x73, 0x00, 0x0a }, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_DUALPOINT } }, /* ThinkPad R61 8918-5QG */
133 { { 0x73, 0x00, 0x14 }, { ALPS_PROTO_V6, 0xff, 0xff, ALPS_DUALPOINT } }, /* Dell XT2 */
134 { { 0x73, 0x02, 0x0a }, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } },
135 { { 0x73, 0x02, 0x14 }, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_FW_BK_2 } }, /* Ahtec Laptop */
136 { { 0x73, 0x02, 0x50 }, { ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_FOUR_BUTTONS } }, /* Dell Vostro 1400 */
137};
138
139static const struct alps_protocol_info alps_v3_protocol_data = {
140 ALPS_PROTO_V3, 0x8f, 0x8f, ALPS_DUALPOINT | ALPS_DUALPOINT_WITH_PRESSURE
141};
142
143static const struct alps_protocol_info alps_v3_rushmore_data = {
144 ALPS_PROTO_V3_RUSHMORE, 0x8f, 0x8f, ALPS_DUALPOINT | ALPS_DUALPOINT_WITH_PRESSURE
145};
146
147static const struct alps_protocol_info alps_v4_protocol_data = {
148 ALPS_PROTO_V4, 0x8f, 0x8f, 0
149};
150
151static const struct alps_protocol_info alps_v5_protocol_data = {
152 ALPS_PROTO_V5, 0xc8, 0xd8, 0
153};
154
155static const struct alps_protocol_info alps_v7_protocol_data = {
156 ALPS_PROTO_V7, 0x48, 0x48, ALPS_DUALPOINT | ALPS_DUALPOINT_WITH_PRESSURE
157};
158
159static const struct alps_protocol_info alps_v8_protocol_data = {
160 ALPS_PROTO_V8, 0x18, 0x18, 0
161};
162
163static const struct alps_protocol_info alps_v9_protocol_data = {
164 ALPS_PROTO_V9, 0xc8, 0xc8, 0
165};
166
167/*
168 * Some v2 models report the stick buttons in separate bits
169 */
170static const struct dmi_system_id alps_dmi_has_separate_stick_buttons[] = {
171#if defined(CONFIG_DMI) && defined(CONFIG_X86)
172 {
173 /* Extrapolated from other entries */
174 .matches = {
175 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
176 DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D420"),
177 },
178 },
179 {
180 /* Reported-by: Hans de Bruin <jmdebruin@xmsnet.nl> */
181 .matches = {
182 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
183 DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D430"),
184 },
185 },
186 {
187 /* Reported-by: Hans de Goede <hdegoede@redhat.com> */
188 .matches = {
189 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
190 DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D620"),
191 },
192 },
193 {
194 /* Extrapolated from other entries */
195 .matches = {
196 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
197 DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D630"),
198 },
199 },
200#endif
201 { }
202};
203
204static void alps_set_abs_params_st(struct alps_data *priv,
205 struct input_dev *dev1);
206static void alps_set_abs_params_semi_mt(struct alps_data *priv,
207 struct input_dev *dev1);
208static void alps_set_abs_params_v7(struct alps_data *priv,
209 struct input_dev *dev1);
210static void alps_set_abs_params_ss4_v2(struct alps_data *priv,
211 struct input_dev *dev1);
212
213/* Packet formats are described in Documentation/input/devices/alps.rst */
214
215static bool alps_is_valid_first_byte(struct alps_data *priv,
216 unsigned char data)
217{
218 return (data & priv->mask0) == priv->byte0;
219}
220
221static void alps_report_buttons(struct input_dev *dev1, struct input_dev *dev2,
222 int left, int right, int middle)
223{
224 struct input_dev *dev;
225
226 /*
227 * If shared button has already been reported on the
228 * other device (dev2) then this event should be also
229 * sent through that device.
230 */
231 dev = (dev2 && test_bit(BTN_LEFT, dev2->key)) ? dev2 : dev1;
232 input_report_key(dev, BTN_LEFT, left);
233
234 dev = (dev2 && test_bit(BTN_RIGHT, dev2->key)) ? dev2 : dev1;
235 input_report_key(dev, BTN_RIGHT, right);
236
237 dev = (dev2 && test_bit(BTN_MIDDLE, dev2->key)) ? dev2 : dev1;
238 input_report_key(dev, BTN_MIDDLE, middle);
239
240 /*
241 * Sync the _other_ device now, we'll do the first
242 * device later once we report the rest of the events.
243 */
244 if (dev2)
245 input_sync(dev2);
246}
247
248static void alps_process_packet_v1_v2(struct psmouse *psmouse)
249{
250 struct alps_data *priv = psmouse->private;
251 unsigned char *packet = psmouse->packet;
252 struct input_dev *dev = psmouse->dev;
253 struct input_dev *dev2 = priv->dev2;
254 int x, y, z, ges, fin, left, right, middle;
255 int back = 0, forward = 0;
256
257 if (priv->proto_version == ALPS_PROTO_V1) {
258 left = packet[2] & 0x10;
259 right = packet[2] & 0x08;
260 middle = 0;
261 x = packet[1] | ((packet[0] & 0x07) << 7);
262 y = packet[4] | ((packet[3] & 0x07) << 7);
263 z = packet[5];
264 } else {
265 left = packet[3] & 1;
266 right = packet[3] & 2;
267 middle = packet[3] & 4;
268 x = packet[1] | ((packet[2] & 0x78) << (7 - 3));
269 y = packet[4] | ((packet[3] & 0x70) << (7 - 4));
270 z = packet[5];
271 }
272
273 if (priv->flags & ALPS_FW_BK_1) {
274 back = packet[0] & 0x10;
275 forward = packet[2] & 4;
276 }
277
278 if (priv->flags & ALPS_FW_BK_2) {
279 back = packet[3] & 4;
280 forward = packet[2] & 4;
281 if ((middle = forward && back))
282 forward = back = 0;
283 }
284
285 ges = packet[2] & 1;
286 fin = packet[2] & 2;
287
288 if ((priv->flags & ALPS_DUALPOINT) && z == 127) {
289 input_report_rel(dev2, REL_X, (x > 383 ? (x - 768) : x));
290 input_report_rel(dev2, REL_Y, -(y > 255 ? (y - 512) : y));
291
292 alps_report_buttons(dev2, dev, left, right, middle);
293
294 input_sync(dev2);
295 return;
296 }
297
298 /* Some models have separate stick button bits */
299 if (priv->flags & ALPS_STICK_BITS) {
300 left |= packet[0] & 1;
301 right |= packet[0] & 2;
302 middle |= packet[0] & 4;
303 }
304
305 alps_report_buttons(dev, dev2, left, right, middle);
306
307 /* Convert hardware tap to a reasonable Z value */
308 if (ges && !fin)
309 z = 40;
310
311 /*
312 * A "tap and drag" operation is reported by the hardware as a transition
313 * from (!fin && ges) to (fin && ges). This should be translated to the
314 * sequence Z>0, Z==0, Z>0, so the Z==0 event has to be generated manually.
315 */
316 if (ges && fin && !priv->prev_fin) {
317 input_report_abs(dev, ABS_X, x);
318 input_report_abs(dev, ABS_Y, y);
319 input_report_abs(dev, ABS_PRESSURE, 0);
320 input_report_key(dev, BTN_TOOL_FINGER, 0);
321 input_sync(dev);
322 }
323 priv->prev_fin = fin;
324
325 if (z > 30)
326 input_report_key(dev, BTN_TOUCH, 1);
327 if (z < 25)
328 input_report_key(dev, BTN_TOUCH, 0);
329
330 if (z > 0) {
331 input_report_abs(dev, ABS_X, x);
332 input_report_abs(dev, ABS_Y, y);
333 }
334
335 input_report_abs(dev, ABS_PRESSURE, z);
336 input_report_key(dev, BTN_TOOL_FINGER, z > 0);
337
338 if (priv->flags & ALPS_WHEEL)
339 input_report_rel(dev, REL_WHEEL, ((packet[2] << 1) & 0x08) - ((packet[0] >> 4) & 0x07));
340
341 if (priv->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) {
342 input_report_key(dev, BTN_FORWARD, forward);
343 input_report_key(dev, BTN_BACK, back);
344 }
345
346 if (priv->flags & ALPS_FOUR_BUTTONS) {
347 input_report_key(dev, BTN_0, packet[2] & 4);
348 input_report_key(dev, BTN_1, packet[0] & 0x10);
349 input_report_key(dev, BTN_2, packet[3] & 4);
350 input_report_key(dev, BTN_3, packet[0] & 0x20);
351 }
352
353 input_sync(dev);
354}
355
356static void alps_get_bitmap_points(unsigned int map,
357 struct alps_bitmap_point *low,
358 struct alps_bitmap_point *high,
359 int *fingers)
360{
361 struct alps_bitmap_point *point;
362 int i, bit, prev_bit = 0;
363
364 point = low;
365 for (i = 0; map != 0; i++, map >>= 1) {
366 bit = map & 1;
367 if (bit) {
368 if (!prev_bit) {
369 point->start_bit = i;
370 point->num_bits = 0;
371 (*fingers)++;
372 }
373 point->num_bits++;
374 } else {
375 if (prev_bit)
376 point = high;
377 }
378 prev_bit = bit;
379 }
380}
381
382/*
383 * Process bitmap data from semi-mt protocols. Returns the number of
384 * fingers detected. A return value of 0 means at least one of the
385 * bitmaps was empty.
386 *
387 * The bitmaps don't have enough data to track fingers, so this function
388 * only generates points representing a bounding box of all contacts.
389 * These points are returned in fields->mt when the return value
390 * is greater than 0.
391 */
392static int alps_process_bitmap(struct alps_data *priv,
393 struct alps_fields *fields)
394{
395 int i, fingers_x = 0, fingers_y = 0, fingers, closest;
396 struct alps_bitmap_point x_low = {0,}, x_high = {0,};
397 struct alps_bitmap_point y_low = {0,}, y_high = {0,};
398 struct input_mt_pos corner[4];
399
400 if (!fields->x_map || !fields->y_map)
401 return 0;
402
403 alps_get_bitmap_points(fields->x_map, &x_low, &x_high, &fingers_x);
404 alps_get_bitmap_points(fields->y_map, &y_low, &y_high, &fingers_y);
405
406 /*
407 * Fingers can overlap, so we use the maximum count of fingers
408 * on either axis as the finger count.
409 */
410 fingers = max(fingers_x, fingers_y);
411
412 /*
413 * If an axis reports only a single contact, we have overlapping or
414 * adjacent fingers. Divide the single contact between the two points.
415 */
416 if (fingers_x == 1) {
417 i = (x_low.num_bits - 1) / 2;
418 x_low.num_bits = x_low.num_bits - i;
419 x_high.start_bit = x_low.start_bit + i;
420 x_high.num_bits = max(i, 1);
421 }
422 if (fingers_y == 1) {
423 i = (y_low.num_bits - 1) / 2;
424 y_low.num_bits = y_low.num_bits - i;
425 y_high.start_bit = y_low.start_bit + i;
426 y_high.num_bits = max(i, 1);
427 }
428
429 /* top-left corner */
430 corner[0].x =
431 (priv->x_max * (2 * x_low.start_bit + x_low.num_bits - 1)) /
432 (2 * (priv->x_bits - 1));
433 corner[0].y =
434 (priv->y_max * (2 * y_low.start_bit + y_low.num_bits - 1)) /
435 (2 * (priv->y_bits - 1));
436
437 /* top-right corner */
438 corner[1].x =
439 (priv->x_max * (2 * x_high.start_bit + x_high.num_bits - 1)) /
440 (2 * (priv->x_bits - 1));
441 corner[1].y =
442 (priv->y_max * (2 * y_low.start_bit + y_low.num_bits - 1)) /
443 (2 * (priv->y_bits - 1));
444
445 /* bottom-right corner */
446 corner[2].x =
447 (priv->x_max * (2 * x_high.start_bit + x_high.num_bits - 1)) /
448 (2 * (priv->x_bits - 1));
449 corner[2].y =
450 (priv->y_max * (2 * y_high.start_bit + y_high.num_bits - 1)) /
451 (2 * (priv->y_bits - 1));
452
453 /* bottom-left corner */
454 corner[3].x =
455 (priv->x_max * (2 * x_low.start_bit + x_low.num_bits - 1)) /
456 (2 * (priv->x_bits - 1));
457 corner[3].y =
458 (priv->y_max * (2 * y_high.start_bit + y_high.num_bits - 1)) /
459 (2 * (priv->y_bits - 1));
460
461 /* x-bitmap order is reversed on v5 touchpads */
462 if (priv->proto_version == ALPS_PROTO_V5) {
463 for (i = 0; i < 4; i++)
464 corner[i].x = priv->x_max - corner[i].x;
465 }
466
467 /* y-bitmap order is reversed on v3 and v4 touchpads */
468 if (priv->proto_version == ALPS_PROTO_V3 ||
469 priv->proto_version == ALPS_PROTO_V4) {
470 for (i = 0; i < 4; i++)
471 corner[i].y = priv->y_max - corner[i].y;
472 }
473
474 /*
475 * We only select a corner for the second touch once per 2 finger
476 * touch sequence to avoid the chosen corner (and thus the coordinates)
477 * jumping around when the first touch is in the middle.
478 */
479 if (priv->second_touch == -1) {
480 /* Find corner closest to our st coordinates */
481 closest = 0x7fffffff;
482 for (i = 0; i < 4; i++) {
483 int dx = fields->st.x - corner[i].x;
484 int dy = fields->st.y - corner[i].y;
485 int distance = dx * dx + dy * dy;
486
487 if (distance < closest) {
488 priv->second_touch = i;
489 closest = distance;
490 }
491 }
492 /* And select the opposite corner to use for the 2nd touch */
493 priv->second_touch = (priv->second_touch + 2) % 4;
494 }
495
496 fields->mt[0] = fields->st;
497 fields->mt[1] = corner[priv->second_touch];
498
499 return fingers;
500}
501
502static void alps_set_slot(struct input_dev *dev, int slot, int x, int y)
503{
504 input_mt_slot(dev, slot);
505 input_mt_report_slot_state(dev, MT_TOOL_FINGER, true);
506 input_report_abs(dev, ABS_MT_POSITION_X, x);
507 input_report_abs(dev, ABS_MT_POSITION_Y, y);
508}
509
510static void alps_report_mt_data(struct psmouse *psmouse, int n)
511{
512 struct alps_data *priv = psmouse->private;
513 struct input_dev *dev = psmouse->dev;
514 struct alps_fields *f = &priv->f;
515 int i, slot[MAX_TOUCHES];
516
517 input_mt_assign_slots(dev, slot, f->mt, n, 0);
518 for (i = 0; i < n; i++)
519 alps_set_slot(dev, slot[i], f->mt[i].x, f->mt[i].y);
520
521 input_mt_sync_frame(dev);
522}
523
524static void alps_report_semi_mt_data(struct psmouse *psmouse, int fingers)
525{
526 struct alps_data *priv = psmouse->private;
527 struct input_dev *dev = psmouse->dev;
528 struct alps_fields *f = &priv->f;
529
530 /* Use st data when we don't have mt data */
531 if (fingers < 2) {
532 f->mt[0].x = f->st.x;
533 f->mt[0].y = f->st.y;
534 fingers = f->pressure > 0 ? 1 : 0;
535 priv->second_touch = -1;
536 }
537
538 if (fingers >= 1)
539 alps_set_slot(dev, 0, f->mt[0].x, f->mt[0].y);
540 if (fingers >= 2)
541 alps_set_slot(dev, 1, f->mt[1].x, f->mt[1].y);
542 input_mt_sync_frame(dev);
543
544 input_mt_report_finger_count(dev, fingers);
545
546 input_report_key(dev, BTN_LEFT, f->left);
547 input_report_key(dev, BTN_RIGHT, f->right);
548 input_report_key(dev, BTN_MIDDLE, f->middle);
549
550 input_report_abs(dev, ABS_PRESSURE, f->pressure);
551
552 input_sync(dev);
553}
554
555static void alps_process_trackstick_packet_v3(struct psmouse *psmouse)
556{
557 struct alps_data *priv = psmouse->private;
558 unsigned char *packet = psmouse->packet;
559 struct input_dev *dev = priv->dev2;
560 int x, y, z, left, right, middle;
561
562 /* It should be a DualPoint when received trackstick packet */
563 if (!(priv->flags & ALPS_DUALPOINT)) {
564 psmouse_warn(psmouse,
565 "Rejected trackstick packet from non DualPoint device");
566 return;
567 }
568
569 /* Sanity check packet */
570 if (!(packet[0] & 0x40)) {
571 psmouse_dbg(psmouse, "Bad trackstick packet, discarding\n");
572 return;
573 }
574
575 /*
576 * There's a special packet that seems to indicate the end
577 * of a stream of trackstick data. Filter these out.
578 */
579 if (packet[1] == 0x7f && packet[2] == 0x7f && packet[4] == 0x7f)
580 return;
581
582 x = (s8)(((packet[0] & 0x20) << 2) | (packet[1] & 0x7f));
583 y = (s8)(((packet[0] & 0x10) << 3) | (packet[2] & 0x7f));
584 z = packet[4] & 0x7f;
585
586 /*
587 * The x and y values tend to be quite large, and when used
588 * alone the trackstick is difficult to use. Scale them down
589 * to compensate.
590 */
591 x /= 8;
592 y /= 8;
593
594 input_report_rel(dev, REL_X, x);
595 input_report_rel(dev, REL_Y, -y);
596 input_report_abs(dev, ABS_PRESSURE, z);
597
598 /*
599 * Most ALPS models report the trackstick buttons in the touchpad
600 * packets, but a few report them here. No reliable way has been
601 * found to differentiate between the models upfront, so we enable
602 * the quirk in response to seeing a button press in the trackstick
603 * packet.
604 */
605 left = packet[3] & 0x01;
606 right = packet[3] & 0x02;
607 middle = packet[3] & 0x04;
608
609 if (!(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS) &&
610 (left || right || middle))
611 priv->quirks |= ALPS_QUIRK_TRACKSTICK_BUTTONS;
612
613 if (priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS) {
614 input_report_key(dev, BTN_LEFT, left);
615 input_report_key(dev, BTN_RIGHT, right);
616 input_report_key(dev, BTN_MIDDLE, middle);
617 }
618
619 input_sync(dev);
620 return;
621}
622
623static void alps_decode_buttons_v3(struct alps_fields *f, unsigned char *p)
624{
625 f->left = !!(p[3] & 0x01);
626 f->right = !!(p[3] & 0x02);
627 f->middle = !!(p[3] & 0x04);
628
629 f->ts_left = !!(p[3] & 0x10);
630 f->ts_right = !!(p[3] & 0x20);
631 f->ts_middle = !!(p[3] & 0x40);
632}
633
634static int alps_decode_pinnacle(struct alps_fields *f, unsigned char *p,
635 struct psmouse *psmouse)
636{
637 f->first_mp = !!(p[4] & 0x40);
638 f->is_mp = !!(p[0] & 0x40);
639
640 if (f->is_mp) {
641 f->fingers = (p[5] & 0x3) + 1;
642 f->x_map = ((p[4] & 0x7e) << 8) |
643 ((p[1] & 0x7f) << 2) |
644 ((p[0] & 0x30) >> 4);
645 f->y_map = ((p[3] & 0x70) << 4) |
646 ((p[2] & 0x7f) << 1) |
647 (p[4] & 0x01);
648 } else {
649 f->st.x = ((p[1] & 0x7f) << 4) | ((p[4] & 0x30) >> 2) |
650 ((p[0] & 0x30) >> 4);
651 f->st.y = ((p[2] & 0x7f) << 4) | (p[4] & 0x0f);
652 f->pressure = p[5] & 0x7f;
653
654 alps_decode_buttons_v3(f, p);
655 }
656
657 return 0;
658}
659
660static int alps_decode_rushmore(struct alps_fields *f, unsigned char *p,
661 struct psmouse *psmouse)
662{
663 f->first_mp = !!(p[4] & 0x40);
664 f->is_mp = !!(p[5] & 0x40);
665
666 if (f->is_mp) {
667 f->fingers = max((p[5] & 0x3), ((p[5] >> 2) & 0x3)) + 1;
668 f->x_map = ((p[5] & 0x10) << 11) |
669 ((p[4] & 0x7e) << 8) |
670 ((p[1] & 0x7f) << 2) |
671 ((p[0] & 0x30) >> 4);
672 f->y_map = ((p[5] & 0x20) << 6) |
673 ((p[3] & 0x70) << 4) |
674 ((p[2] & 0x7f) << 1) |
675 (p[4] & 0x01);
676 } else {
677 f->st.x = ((p[1] & 0x7f) << 4) | ((p[4] & 0x30) >> 2) |
678 ((p[0] & 0x30) >> 4);
679 f->st.y = ((p[2] & 0x7f) << 4) | (p[4] & 0x0f);
680 f->pressure = p[5] & 0x7f;
681
682 alps_decode_buttons_v3(f, p);
683 }
684
685 return 0;
686}
687
688static int alps_decode_dolphin(struct alps_fields *f, unsigned char *p,
689 struct psmouse *psmouse)
690{
691 u64 palm_data = 0;
692 struct alps_data *priv = psmouse->private;
693
694 f->first_mp = !!(p[0] & 0x02);
695 f->is_mp = !!(p[0] & 0x20);
696
697 if (!f->is_mp) {
698 f->st.x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7));
699 f->st.y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3));
700 f->pressure = (p[0] & 4) ? 0 : p[5] & 0x7f;
701 alps_decode_buttons_v3(f, p);
702 } else {
703 f->fingers = ((p[0] & 0x6) >> 1 |
704 (p[0] & 0x10) >> 2);
705
706 palm_data = (p[1] & 0x7f) |
707 ((p[2] & 0x7f) << 7) |
708 ((p[4] & 0x7f) << 14) |
709 ((p[5] & 0x7f) << 21) |
710 ((p[3] & 0x07) << 28) |
711 (((u64)p[3] & 0x70) << 27) |
712 (((u64)p[0] & 0x01) << 34);
713
714 /* Y-profile is stored in P(0) to p(n-1), n = y_bits; */
715 f->y_map = palm_data & (BIT(priv->y_bits) - 1);
716
717 /* X-profile is stored in p(n) to p(n+m-1), m = x_bits; */
718 f->x_map = (palm_data >> priv->y_bits) &
719 (BIT(priv->x_bits) - 1);
720 }
721
722 return 0;
723}
724
725static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse)
726{
727 struct alps_data *priv = psmouse->private;
728 unsigned char *packet = psmouse->packet;
729 struct input_dev *dev2 = priv->dev2;
730 struct alps_fields *f = &priv->f;
731 int fingers = 0;
732
733 memset(f, 0, sizeof(*f));
734
735 priv->decode_fields(f, packet, psmouse);
736
737 /*
738 * There's no single feature of touchpad position and bitmap packets
739 * that can be used to distinguish between them. We rely on the fact
740 * that a bitmap packet should always follow a position packet with
741 * bit 6 of packet[4] set.
742 */
743 if (priv->multi_packet) {
744 /*
745 * Sometimes a position packet will indicate a multi-packet
746 * sequence, but then what follows is another position
747 * packet. Check for this, and when it happens process the
748 * position packet as usual.
749 */
750 if (f->is_mp) {
751 fingers = f->fingers;
752 /*
753 * Bitmap processing uses position packet's coordinate
754 * data, so we need to do decode it first.
755 */
756 priv->decode_fields(f, priv->multi_data, psmouse);
757 if (alps_process_bitmap(priv, f) == 0)
758 fingers = 0; /* Use st data */
759 } else {
760 priv->multi_packet = 0;
761 }
762 }
763
764 /*
765 * Bit 6 of byte 0 is not usually set in position packets. The only
766 * times it seems to be set is in situations where the data is
767 * suspect anyway, e.g. a palm resting flat on the touchpad. Given
768 * this combined with the fact that this bit is useful for filtering
769 * out misidentified bitmap packets, we reject anything with this
770 * bit set.
771 */
772 if (f->is_mp)
773 return;
774
775 if (!priv->multi_packet && f->first_mp) {
776 priv->multi_packet = 1;
777 memcpy(priv->multi_data, packet, sizeof(priv->multi_data));
778 return;
779 }
780
781 priv->multi_packet = 0;
782
783 /*
784 * Sometimes the hardware sends a single packet with z = 0
785 * in the middle of a stream. Real releases generate packets
786 * with x, y, and z all zero, so these seem to be flukes.
787 * Ignore them.
788 */
789 if (f->st.x && f->st.y && !f->pressure)
790 return;
791
792 alps_report_semi_mt_data(psmouse, fingers);
793
794 if ((priv->flags & ALPS_DUALPOINT) &&
795 !(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS)) {
796 input_report_key(dev2, BTN_LEFT, f->ts_left);
797 input_report_key(dev2, BTN_RIGHT, f->ts_right);
798 input_report_key(dev2, BTN_MIDDLE, f->ts_middle);
799 input_sync(dev2);
800 }
801}
802
803static void alps_process_packet_v3(struct psmouse *psmouse)
804{
805 unsigned char *packet = psmouse->packet;
806
807 /*
808 * v3 protocol packets come in three types, two representing
809 * touchpad data and one representing trackstick data.
810 * Trackstick packets seem to be distinguished by always
811 * having 0x3f in the last byte. This value has never been
812 * observed in the last byte of either of the other types
813 * of packets.
814 */
815 if (packet[5] == 0x3f) {
816 alps_process_trackstick_packet_v3(psmouse);
817 return;
818 }
819
820 alps_process_touchpad_packet_v3_v5(psmouse);
821}
822
823static void alps_process_packet_v6(struct psmouse *psmouse)
824{
825 struct alps_data *priv = psmouse->private;
826 unsigned char *packet = psmouse->packet;
827 struct input_dev *dev = psmouse->dev;
828 struct input_dev *dev2 = priv->dev2;
829 int x, y, z;
830
831 /*
832 * We can use Byte5 to distinguish if the packet is from Touchpad
833 * or Trackpoint.
834 * Touchpad: 0 - 0x7E
835 * Trackpoint: 0x7F
836 */
837 if (packet[5] == 0x7F) {
838 /* It should be a DualPoint when received Trackpoint packet */
839 if (!(priv->flags & ALPS_DUALPOINT)) {
840 psmouse_warn(psmouse,
841 "Rejected trackstick packet from non DualPoint device");
842 return;
843 }
844
845 /* Trackpoint packet */
846 x = packet[1] | ((packet[3] & 0x20) << 2);
847 y = packet[2] | ((packet[3] & 0x40) << 1);
848 z = packet[4];
849
850 /* To prevent the cursor jump when finger lifted */
851 if (x == 0x7F && y == 0x7F && z == 0x7F)
852 x = y = z = 0;
853
854 /* Divide 4 since trackpoint's speed is too fast */
855 input_report_rel(dev2, REL_X, (s8)x / 4);
856 input_report_rel(dev2, REL_Y, -((s8)y / 4));
857
858 psmouse_report_standard_buttons(dev2, packet[3]);
859
860 input_sync(dev2);
861 return;
862 }
863
864 /* Touchpad packet */
865 x = packet[1] | ((packet[3] & 0x78) << 4);
866 y = packet[2] | ((packet[4] & 0x78) << 4);
867 z = packet[5];
868
869 if (z > 30)
870 input_report_key(dev, BTN_TOUCH, 1);
871 if (z < 25)
872 input_report_key(dev, BTN_TOUCH, 0);
873
874 if (z > 0) {
875 input_report_abs(dev, ABS_X, x);
876 input_report_abs(dev, ABS_Y, y);
877 }
878
879 input_report_abs(dev, ABS_PRESSURE, z);
880 input_report_key(dev, BTN_TOOL_FINGER, z > 0);
881
882 /* v6 touchpad does not have middle button */
883 packet[3] &= ~BIT(2);
884 psmouse_report_standard_buttons(dev2, packet[3]);
885
886 input_sync(dev);
887}
888
889static void alps_process_packet_v4(struct psmouse *psmouse)
890{
891 struct alps_data *priv = psmouse->private;
892 unsigned char *packet = psmouse->packet;
893 struct alps_fields *f = &priv->f;
894 int offset;
895
896 /*
897 * v4 has a 6-byte encoding for bitmap data, but this data is
898 * broken up between 3 normal packets. Use priv->multi_packet to
899 * track our position in the bitmap packet.
900 */
901 if (packet[6] & 0x40) {
902 /* sync, reset position */
903 priv->multi_packet = 0;
904 }
905
906 if (WARN_ON_ONCE(priv->multi_packet > 2))
907 return;
908
909 offset = 2 * priv->multi_packet;
910 priv->multi_data[offset] = packet[6];
911 priv->multi_data[offset + 1] = packet[7];
912
913 f->left = !!(packet[4] & 0x01);
914 f->right = !!(packet[4] & 0x02);
915
916 f->st.x = ((packet[1] & 0x7f) << 4) | ((packet[3] & 0x30) >> 2) |
917 ((packet[0] & 0x30) >> 4);
918 f->st.y = ((packet[2] & 0x7f) << 4) | (packet[3] & 0x0f);
919 f->pressure = packet[5] & 0x7f;
920
921 if (++priv->multi_packet > 2) {
922 priv->multi_packet = 0;
923
924 f->x_map = ((priv->multi_data[2] & 0x1f) << 10) |
925 ((priv->multi_data[3] & 0x60) << 3) |
926 ((priv->multi_data[0] & 0x3f) << 2) |
927 ((priv->multi_data[1] & 0x60) >> 5);
928 f->y_map = ((priv->multi_data[5] & 0x01) << 10) |
929 ((priv->multi_data[3] & 0x1f) << 5) |
930 (priv->multi_data[1] & 0x1f);
931
932 f->fingers = alps_process_bitmap(priv, f);
933 }
934
935 alps_report_semi_mt_data(psmouse, f->fingers);
936}
937
938static bool alps_is_valid_package_v7(struct psmouse *psmouse)
939{
940 switch (psmouse->pktcnt) {
941 case 3:
942 return (psmouse->packet[2] & 0x40) == 0x40;
943 case 4:
944 return (psmouse->packet[3] & 0x48) == 0x48;
945 case 6:
946 return (psmouse->packet[5] & 0x40) == 0x00;
947 }
948 return true;
949}
950
951static unsigned char alps_get_packet_id_v7(char *byte)
952{
953 unsigned char packet_id;
954
955 if (byte[4] & 0x40)
956 packet_id = V7_PACKET_ID_TWO;
957 else if (byte[4] & 0x01)
958 packet_id = V7_PACKET_ID_MULTI;
959 else if ((byte[0] & 0x10) && !(byte[4] & 0x43))
960 packet_id = V7_PACKET_ID_NEW;
961 else if (byte[1] == 0x00 && byte[4] == 0x00)
962 packet_id = V7_PACKET_ID_IDLE;
963 else
964 packet_id = V7_PACKET_ID_UNKNOWN;
965
966 return packet_id;
967}
968
969static void alps_get_finger_coordinate_v7(struct input_mt_pos *mt,
970 unsigned char *pkt,
971 unsigned char pkt_id)
972{
973 mt[0].x = ((pkt[2] & 0x80) << 4);
974 mt[0].x |= ((pkt[2] & 0x3F) << 5);
975 mt[0].x |= ((pkt[3] & 0x30) >> 1);
976 mt[0].x |= (pkt[3] & 0x07);
977 mt[0].y = (pkt[1] << 3) | (pkt[0] & 0x07);
978
979 mt[1].x = ((pkt[3] & 0x80) << 4);
980 mt[1].x |= ((pkt[4] & 0x80) << 3);
981 mt[1].x |= ((pkt[4] & 0x3F) << 4);
982 mt[1].y = ((pkt[5] & 0x80) << 3);
983 mt[1].y |= ((pkt[5] & 0x3F) << 4);
984
985 switch (pkt_id) {
986 case V7_PACKET_ID_TWO:
987 mt[1].x &= ~0x000F;
988 mt[1].y |= 0x000F;
989 /* Detect false-positive touches where x & y report max value */
990 if (mt[1].y == 0x7ff && mt[1].x == 0xff0) {
991 mt[1].x = 0;
992 /* y gets set to 0 at the end of this function */
993 }
994 break;
995
996 case V7_PACKET_ID_MULTI:
997 mt[1].x &= ~0x003F;
998 mt[1].y &= ~0x0020;
999 mt[1].y |= ((pkt[4] & 0x02) << 4);
1000 mt[1].y |= 0x001F;
1001 break;
1002
1003 case V7_PACKET_ID_NEW:
1004 mt[1].x &= ~0x003F;
1005 mt[1].x |= (pkt[0] & 0x20);
1006 mt[1].y |= 0x000F;
1007 break;
1008 }
1009
1010 mt[0].y = 0x7FF - mt[0].y;
1011 mt[1].y = 0x7FF - mt[1].y;
1012}
1013
1014static int alps_get_mt_count(struct input_mt_pos *mt)
1015{
1016 int i, fingers = 0;
1017
1018 for (i = 0; i < MAX_TOUCHES; i++) {
1019 if (mt[i].x != 0 || mt[i].y != 0)
1020 fingers++;
1021 }
1022
1023 return fingers;
1024}
1025
1026static int alps_decode_packet_v7(struct alps_fields *f,
1027 unsigned char *p,
1028 struct psmouse *psmouse)
1029{
1030 struct alps_data *priv = psmouse->private;
1031 unsigned char pkt_id;
1032
1033 pkt_id = alps_get_packet_id_v7(p);
1034 if (pkt_id == V7_PACKET_ID_IDLE)
1035 return 0;
1036 if (pkt_id == V7_PACKET_ID_UNKNOWN)
1037 return -1;
1038 /*
1039 * NEW packets are send to indicate a discontinuity in the finger
1040 * coordinate reporting. Specifically a finger may have moved from
1041 * slot 0 to 1 or vice versa. INPUT_MT_TRACK takes care of this for
1042 * us.
1043 *
1044 * NEW packets have 3 problems:
1045 * 1) They do not contain middle / right button info (on non clickpads)
1046 * this can be worked around by preserving the old button state
1047 * 2) They do not contain an accurate fingercount, and they are
1048 * typically send when the number of fingers changes. We cannot use
1049 * the old finger count as that may mismatch with the amount of
1050 * touch coordinates we've available in the NEW packet
1051 * 3) Their x data for the second touch is inaccurate leading to
1052 * a possible jump of the x coordinate by 16 units when the first
1053 * non NEW packet comes in
1054 * Since problems 2 & 3 cannot be worked around, just ignore them.
1055 */
1056 if (pkt_id == V7_PACKET_ID_NEW)
1057 return 1;
1058
1059 alps_get_finger_coordinate_v7(f->mt, p, pkt_id);
1060
1061 if (pkt_id == V7_PACKET_ID_TWO)
1062 f->fingers = alps_get_mt_count(f->mt);
1063 else /* pkt_id == V7_PACKET_ID_MULTI */
1064 f->fingers = 3 + (p[5] & 0x03);
1065
1066 f->left = (p[0] & 0x80) >> 7;
1067 if (priv->flags & ALPS_BUTTONPAD) {
1068 if (p[0] & 0x20)
1069 f->fingers++;
1070 if (p[0] & 0x10)
1071 f->fingers++;
1072 } else {
1073 f->right = (p[0] & 0x20) >> 5;
1074 f->middle = (p[0] & 0x10) >> 4;
1075 }
1076
1077 /* Sometimes a single touch is reported in mt[1] rather then mt[0] */
1078 if (f->fingers == 1 && f->mt[0].x == 0 && f->mt[0].y == 0) {
1079 f->mt[0].x = f->mt[1].x;
1080 f->mt[0].y = f->mt[1].y;
1081 f->mt[1].x = 0;
1082 f->mt[1].y = 0;
1083 }
1084
1085 return 0;
1086}
1087
1088static void alps_process_trackstick_packet_v7(struct psmouse *psmouse)
1089{
1090 struct alps_data *priv = psmouse->private;
1091 unsigned char *packet = psmouse->packet;
1092 struct input_dev *dev2 = priv->dev2;
1093 int x, y, z;
1094
1095 /* It should be a DualPoint when received trackstick packet */
1096 if (!(priv->flags & ALPS_DUALPOINT)) {
1097 psmouse_warn(psmouse,
1098 "Rejected trackstick packet from non DualPoint device");
1099 return;
1100 }
1101
1102 x = ((packet[2] & 0xbf)) | ((packet[3] & 0x10) << 2);
1103 y = (packet[3] & 0x07) | (packet[4] & 0xb8) |
1104 ((packet[3] & 0x20) << 1);
1105 z = (packet[5] & 0x3f) | ((packet[3] & 0x80) >> 1);
1106
1107 input_report_rel(dev2, REL_X, (s8)x);
1108 input_report_rel(dev2, REL_Y, -((s8)y));
1109 input_report_abs(dev2, ABS_PRESSURE, z);
1110
1111 psmouse_report_standard_buttons(dev2, packet[1]);
1112
1113 input_sync(dev2);
1114}
1115
1116static void alps_process_touchpad_packet_v7(struct psmouse *psmouse)
1117{
1118 struct alps_data *priv = psmouse->private;
1119 struct input_dev *dev = psmouse->dev;
1120 struct alps_fields *f = &priv->f;
1121
1122 memset(f, 0, sizeof(*f));
1123
1124 if (priv->decode_fields(f, psmouse->packet, psmouse))
1125 return;
1126
1127 alps_report_mt_data(psmouse, alps_get_mt_count(f->mt));
1128
1129 input_mt_report_finger_count(dev, f->fingers);
1130
1131 input_report_key(dev, BTN_LEFT, f->left);
1132 input_report_key(dev, BTN_RIGHT, f->right);
1133 input_report_key(dev, BTN_MIDDLE, f->middle);
1134
1135 input_sync(dev);
1136}
1137
1138static void alps_process_packet_v7(struct psmouse *psmouse)
1139{
1140 unsigned char *packet = psmouse->packet;
1141
1142 if (packet[0] == 0x48 && (packet[4] & 0x47) == 0x06)
1143 alps_process_trackstick_packet_v7(psmouse);
1144 else
1145 alps_process_touchpad_packet_v7(psmouse);
1146}
1147
1148static enum SS4_PACKET_ID alps_get_pkt_id_ss4_v2(unsigned char *byte)
1149{
1150 enum SS4_PACKET_ID pkt_id = SS4_PACKET_ID_IDLE;
1151
1152 switch (byte[3] & 0x30) {
1153 case 0x00:
1154 if (SS4_IS_IDLE_V2(byte)) {
1155 pkt_id = SS4_PACKET_ID_IDLE;
1156 } else {
1157 pkt_id = SS4_PACKET_ID_ONE;
1158 }
1159 break;
1160 case 0x10:
1161 /* two-finger finger positions */
1162 pkt_id = SS4_PACKET_ID_TWO;
1163 break;
1164 case 0x20:
1165 /* stick pointer */
1166 pkt_id = SS4_PACKET_ID_STICK;
1167 break;
1168 case 0x30:
1169 /* third and fourth finger positions */
1170 pkt_id = SS4_PACKET_ID_MULTI;
1171 break;
1172 }
1173
1174 return pkt_id;
1175}
1176
1177static int alps_decode_ss4_v2(struct alps_fields *f,
1178 unsigned char *p, struct psmouse *psmouse)
1179{
1180 struct alps_data *priv = psmouse->private;
1181 enum SS4_PACKET_ID pkt_id;
1182 unsigned int no_data_x, no_data_y;
1183
1184 pkt_id = alps_get_pkt_id_ss4_v2(p);
1185
1186 /* Current packet is 1Finger coordinate packet */
1187 switch (pkt_id) {
1188 case SS4_PACKET_ID_ONE:
1189 f->mt[0].x = SS4_1F_X_V2(p);
1190 f->mt[0].y = SS4_1F_Y_V2(p);
1191 f->pressure = ((SS4_1F_Z_V2(p)) * 2) & 0x7f;
1192 /*
1193 * When a button is held the device will give us events
1194 * with x, y, and pressure of 0. This causes annoying jumps
1195 * if a touch is released while the button is held.
1196 * Handle this by claiming zero contacts.
1197 */
1198 f->fingers = f->pressure > 0 ? 1 : 0;
1199 f->first_mp = 0;
1200 f->is_mp = 0;
1201 break;
1202
1203 case SS4_PACKET_ID_TWO:
1204 if (priv->flags & ALPS_BUTTONPAD) {
1205 if (IS_SS4PLUS_DEV(priv->dev_id)) {
1206 f->mt[0].x = SS4_PLUS_BTL_MF_X_V2(p, 0);
1207 f->mt[1].x = SS4_PLUS_BTL_MF_X_V2(p, 1);
1208 } else {
1209 f->mt[0].x = SS4_BTL_MF_X_V2(p, 0);
1210 f->mt[1].x = SS4_BTL_MF_X_V2(p, 1);
1211 }
1212 f->mt[0].y = SS4_BTL_MF_Y_V2(p, 0);
1213 f->mt[1].y = SS4_BTL_MF_Y_V2(p, 1);
1214 } else {
1215 if (IS_SS4PLUS_DEV(priv->dev_id)) {
1216 f->mt[0].x = SS4_PLUS_STD_MF_X_V2(p, 0);
1217 f->mt[1].x = SS4_PLUS_STD_MF_X_V2(p, 1);
1218 } else {
1219 f->mt[0].x = SS4_STD_MF_X_V2(p, 0);
1220 f->mt[1].x = SS4_STD_MF_X_V2(p, 1);
1221 }
1222 f->mt[0].y = SS4_STD_MF_Y_V2(p, 0);
1223 f->mt[1].y = SS4_STD_MF_Y_V2(p, 1);
1224 }
1225 f->pressure = SS4_MF_Z_V2(p, 0) ? 0x30 : 0;
1226
1227 if (SS4_IS_MF_CONTINUE(p)) {
1228 f->first_mp = 1;
1229 } else {
1230 f->fingers = 2;
1231 f->first_mp = 0;
1232 }
1233 f->is_mp = 0;
1234
1235 break;
1236
1237 case SS4_PACKET_ID_MULTI:
1238 if (priv->flags & ALPS_BUTTONPAD) {
1239 if (IS_SS4PLUS_DEV(priv->dev_id)) {
1240 f->mt[2].x = SS4_PLUS_BTL_MF_X_V2(p, 0);
1241 f->mt[3].x = SS4_PLUS_BTL_MF_X_V2(p, 1);
1242 no_data_x = SS4_PLUS_MFPACKET_NO_AX_BL;
1243 } else {
1244 f->mt[2].x = SS4_BTL_MF_X_V2(p, 0);
1245 f->mt[3].x = SS4_BTL_MF_X_V2(p, 1);
1246 no_data_x = SS4_MFPACKET_NO_AX_BL;
1247 }
1248 no_data_y = SS4_MFPACKET_NO_AY_BL;
1249
1250 f->mt[2].y = SS4_BTL_MF_Y_V2(p, 0);
1251 f->mt[3].y = SS4_BTL_MF_Y_V2(p, 1);
1252 } else {
1253 if (IS_SS4PLUS_DEV(priv->dev_id)) {
1254 f->mt[2].x = SS4_PLUS_STD_MF_X_V2(p, 0);
1255 f->mt[3].x = SS4_PLUS_STD_MF_X_V2(p, 1);
1256 no_data_x = SS4_PLUS_MFPACKET_NO_AX;
1257 } else {
1258 f->mt[2].x = SS4_STD_MF_X_V2(p, 0);
1259 f->mt[3].x = SS4_STD_MF_X_V2(p, 1);
1260 no_data_x = SS4_MFPACKET_NO_AX;
1261 }
1262 no_data_y = SS4_MFPACKET_NO_AY;
1263
1264 f->mt[2].y = SS4_STD_MF_Y_V2(p, 0);
1265 f->mt[3].y = SS4_STD_MF_Y_V2(p, 1);
1266 }
1267
1268 f->first_mp = 0;
1269 f->is_mp = 1;
1270
1271 if (SS4_IS_5F_DETECTED(p)) {
1272 f->fingers = 5;
1273 } else if (f->mt[3].x == no_data_x &&
1274 f->mt[3].y == no_data_y) {
1275 f->mt[3].x = 0;
1276 f->mt[3].y = 0;
1277 f->fingers = 3;
1278 } else {
1279 f->fingers = 4;
1280 }
1281 break;
1282
1283 case SS4_PACKET_ID_STICK:
1284 /*
1285 * x, y, and pressure are decoded in
1286 * alps_process_packet_ss4_v2()
1287 */
1288 f->first_mp = 0;
1289 f->is_mp = 0;
1290 break;
1291
1292 case SS4_PACKET_ID_IDLE:
1293 default:
1294 memset(f, 0, sizeof(struct alps_fields));
1295 break;
1296 }
1297
1298 /* handle buttons */
1299 if (pkt_id == SS4_PACKET_ID_STICK) {
1300 f->ts_left = !!(SS4_BTN_V2(p) & 0x01);
1301 f->ts_right = !!(SS4_BTN_V2(p) & 0x02);
1302 f->ts_middle = !!(SS4_BTN_V2(p) & 0x04);
1303 } else {
1304 f->left = !!(SS4_BTN_V2(p) & 0x01);
1305 if (!(priv->flags & ALPS_BUTTONPAD)) {
1306 f->right = !!(SS4_BTN_V2(p) & 0x02);
1307 f->middle = !!(SS4_BTN_V2(p) & 0x04);
1308 }
1309 }
1310
1311 return 0;
1312}
1313
1314static void alps_process_packet_ss4_v2(struct psmouse *psmouse)
1315{
1316 struct alps_data *priv = psmouse->private;
1317 unsigned char *packet = psmouse->packet;
1318 struct input_dev *dev = psmouse->dev;
1319 struct input_dev *dev2 = priv->dev2;
1320 struct alps_fields *f = &priv->f;
1321
1322 memset(f, 0, sizeof(struct alps_fields));
1323 priv->decode_fields(f, packet, psmouse);
1324 if (priv->multi_packet) {
1325 /*
1326 * Sometimes the first packet will indicate a multi-packet
1327 * sequence, but sometimes the next multi-packet would not
1328 * come. Check for this, and when it happens process the
1329 * position packet as usual.
1330 */
1331 if (f->is_mp) {
1332 /* Now process the 1st packet */
1333 priv->decode_fields(f, priv->multi_data, psmouse);
1334 } else {
1335 priv->multi_packet = 0;
1336 }
1337 }
1338
1339 /*
1340 * "f.is_mp" would always be '0' after merging the 1st and 2nd packet.
1341 * When it is set, it means 2nd packet comes without 1st packet come.
1342 */
1343 if (f->is_mp)
1344 return;
1345
1346 /* Save the first packet */
1347 if (!priv->multi_packet && f->first_mp) {
1348 priv->multi_packet = 1;
1349 memcpy(priv->multi_data, packet, sizeof(priv->multi_data));
1350 return;
1351 }
1352
1353 priv->multi_packet = 0;
1354
1355 /* Report trackstick */
1356 if (alps_get_pkt_id_ss4_v2(packet) == SS4_PACKET_ID_STICK) {
1357 if (!(priv->flags & ALPS_DUALPOINT)) {
1358 psmouse_warn(psmouse,
1359 "Rejected trackstick packet from non DualPoint device");
1360 return;
1361 }
1362
1363 input_report_rel(dev2, REL_X, SS4_TS_X_V2(packet));
1364 input_report_rel(dev2, REL_Y, SS4_TS_Y_V2(packet));
1365 input_report_abs(dev2, ABS_PRESSURE, SS4_TS_Z_V2(packet));
1366
1367 input_report_key(dev2, BTN_LEFT, f->ts_left);
1368 input_report_key(dev2, BTN_RIGHT, f->ts_right);
1369 input_report_key(dev2, BTN_MIDDLE, f->ts_middle);
1370
1371 input_sync(dev2);
1372 return;
1373 }
1374
1375 /* Report touchpad */
1376 alps_report_mt_data(psmouse, (f->fingers <= 4) ? f->fingers : 4);
1377
1378 input_mt_report_finger_count(dev, f->fingers);
1379
1380 input_report_key(dev, BTN_LEFT, f->left);
1381 input_report_key(dev, BTN_RIGHT, f->right);
1382 input_report_key(dev, BTN_MIDDLE, f->middle);
1383
1384 input_report_abs(dev, ABS_PRESSURE, f->pressure);
1385 input_sync(dev);
1386}
1387
1388static bool alps_is_valid_package_ss4_v2(struct psmouse *psmouse)
1389{
1390 if (psmouse->pktcnt == 4 && ((psmouse->packet[3] & 0x08) != 0x08))
1391 return false;
1392 if (psmouse->pktcnt == 6 && ((psmouse->packet[5] & 0x10) != 0x0))
1393 return false;
1394 return true;
1395}
1396
1397static DEFINE_MUTEX(alps_mutex);
1398
1399static int alps_do_register_bare_ps2_mouse(struct alps_data *priv)
1400{
1401 struct psmouse *psmouse = priv->psmouse;
1402 struct input_dev *dev3;
1403 int error;
1404
1405 dev3 = input_allocate_device();
1406 if (!dev3) {
1407 psmouse_err(psmouse, "failed to allocate secondary device\n");
1408 return -ENOMEM;
1409 }
1410
1411 snprintf(priv->phys3, sizeof(priv->phys3), "%s/%s",
1412 psmouse->ps2dev.serio->phys,
1413 (priv->dev2 ? "input2" : "input1"));
1414 dev3->phys = priv->phys3;
1415
1416 /*
1417 * format of input device name is: "protocol vendor name"
1418 * see function psmouse_switch_protocol() in psmouse-base.c
1419 */
1420 dev3->name = "PS/2 ALPS Mouse";
1421
1422 dev3->id.bustype = BUS_I8042;
1423 dev3->id.vendor = 0x0002;
1424 dev3->id.product = PSMOUSE_PS2;
1425 dev3->id.version = 0x0000;
1426 dev3->dev.parent = &psmouse->ps2dev.serio->dev;
1427
1428 input_set_capability(dev3, EV_REL, REL_X);
1429 input_set_capability(dev3, EV_REL, REL_Y);
1430 input_set_capability(dev3, EV_KEY, BTN_LEFT);
1431 input_set_capability(dev3, EV_KEY, BTN_RIGHT);
1432 input_set_capability(dev3, EV_KEY, BTN_MIDDLE);
1433
1434 __set_bit(INPUT_PROP_POINTER, dev3->propbit);
1435
1436 error = input_register_device(dev3);
1437 if (error) {
1438 psmouse_err(psmouse,
1439 "failed to register secondary device: %d\n",
1440 error);
1441 goto err_free_input;
1442 }
1443
1444 priv->dev3 = dev3;
1445 return 0;
1446
1447err_free_input:
1448 input_free_device(dev3);
1449 return error;
1450}
1451
1452static void alps_register_bare_ps2_mouse(struct work_struct *work)
1453{
1454 struct alps_data *priv = container_of(work, struct alps_data,
1455 dev3_register_work.work);
1456 int error;
1457
1458 guard(mutex)(&alps_mutex);
1459
1460 if (!priv->dev3) {
1461 error = alps_do_register_bare_ps2_mouse(priv);
1462 if (error) {
1463 /*
1464 * Save the error code so that we can detect that we
1465 * already tried to create the device.
1466 */
1467 priv->dev3 = ERR_PTR(error);
1468 }
1469 }
1470}
1471
1472static void alps_report_bare_ps2_packet(struct psmouse *psmouse,
1473 unsigned char packet[],
1474 bool report_buttons)
1475{
1476 struct alps_data *priv = psmouse->private;
1477 struct input_dev *dev, *dev2 = NULL;
1478
1479 /* Figure out which device to use to report the bare packet */
1480 if (priv->proto_version == ALPS_PROTO_V2 &&
1481 (priv->flags & ALPS_DUALPOINT)) {
1482 /* On V2 devices the DualPoint Stick reports bare packets */
1483 dev = priv->dev2;
1484 dev2 = psmouse->dev;
1485 } else if (unlikely(IS_ERR_OR_NULL(priv->dev3))) {
1486 /* Register dev3 mouse if we received PS/2 packet first time */
1487 if (!IS_ERR(priv->dev3))
1488 psmouse_queue_work(psmouse, &priv->dev3_register_work,
1489 0);
1490 return;
1491 } else {
1492 dev = priv->dev3;
1493 }
1494
1495 if (report_buttons)
1496 alps_report_buttons(dev, dev2,
1497 packet[0] & 1, packet[0] & 2, packet[0] & 4);
1498
1499 psmouse_report_standard_motion(dev, packet);
1500
1501 input_sync(dev);
1502}
1503
1504static psmouse_ret_t alps_handle_interleaved_ps2(struct psmouse *psmouse)
1505{
1506 struct alps_data *priv = psmouse->private;
1507
1508 if (psmouse->pktcnt < 6)
1509 return PSMOUSE_GOOD_DATA;
1510
1511 if (psmouse->pktcnt == 6) {
1512 /*
1513 * Start a timer to flush the packet if it ends up last
1514 * 6-byte packet in the stream. Timer needs to fire
1515 * psmouse core times out itself. 20 ms should be enough
1516 * to decide if we are getting more data or not.
1517 */
1518 mod_timer(&priv->timer, jiffies + msecs_to_jiffies(20));
1519 return PSMOUSE_GOOD_DATA;
1520 }
1521
1522 del_timer(&priv->timer);
1523
1524 if (psmouse->packet[6] & 0x80) {
1525
1526 /*
1527 * Highest bit is set - that means we either had
1528 * complete ALPS packet and this is start of the
1529 * next packet or we got garbage.
1530 */
1531
1532 if (((psmouse->packet[3] |
1533 psmouse->packet[4] |
1534 psmouse->packet[5]) & 0x80) ||
1535 (!alps_is_valid_first_byte(priv, psmouse->packet[6]))) {
1536 psmouse_dbg(psmouse,
1537 "refusing packet %4ph (suspected interleaved ps/2)\n",
1538 psmouse->packet + 3);
1539 return PSMOUSE_BAD_DATA;
1540 }
1541
1542 priv->process_packet(psmouse);
1543
1544 /* Continue with the next packet */
1545 psmouse->packet[0] = psmouse->packet[6];
1546 psmouse->pktcnt = 1;
1547
1548 } else {
1549
1550 /*
1551 * High bit is 0 - that means that we indeed got a PS/2
1552 * packet in the middle of ALPS packet.
1553 *
1554 * There is also possibility that we got 6-byte ALPS
1555 * packet followed by 3-byte packet from trackpoint. We
1556 * can not distinguish between these 2 scenarios but
1557 * because the latter is unlikely to happen in course of
1558 * normal operation (user would need to press all
1559 * buttons on the pad and start moving trackpoint
1560 * without touching the pad surface) we assume former.
1561 * Even if we are wrong the wost thing that would happen
1562 * the cursor would jump but we should not get protocol
1563 * de-synchronization.
1564 */
1565
1566 alps_report_bare_ps2_packet(psmouse, &psmouse->packet[3],
1567 false);
1568
1569 /*
1570 * Continue with the standard ALPS protocol handling,
1571 * but make sure we won't process it as an interleaved
1572 * packet again, which may happen if all buttons are
1573 * pressed. To avoid this let's reset the 4th bit which
1574 * is normally 1.
1575 */
1576 psmouse->packet[3] = psmouse->packet[6] & 0xf7;
1577 psmouse->pktcnt = 4;
1578 }
1579
1580 return PSMOUSE_GOOD_DATA;
1581}
1582
1583static void alps_flush_packet(struct timer_list *t)
1584{
1585 struct alps_data *priv = from_timer(priv, t, timer);
1586 struct psmouse *psmouse = priv->psmouse;
1587
1588 guard(serio_pause_rx)(psmouse->ps2dev.serio);
1589
1590 if (psmouse->pktcnt == psmouse->pktsize) {
1591
1592 /*
1593 * We did not any more data in reasonable amount of time.
1594 * Validate the last 3 bytes and process as a standard
1595 * ALPS packet.
1596 */
1597 if ((psmouse->packet[3] |
1598 psmouse->packet[4] |
1599 psmouse->packet[5]) & 0x80) {
1600 psmouse_dbg(psmouse,
1601 "refusing packet %3ph (suspected interleaved ps/2)\n",
1602 psmouse->packet + 3);
1603 } else {
1604 priv->process_packet(psmouse);
1605 }
1606 psmouse->pktcnt = 0;
1607 }
1608}
1609
1610static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
1611{
1612 struct alps_data *priv = psmouse->private;
1613
1614 /*
1615 * Check if we are dealing with a bare PS/2 packet, presumably from
1616 * a device connected to the external PS/2 port. Because bare PS/2
1617 * protocol does not have enough constant bits to self-synchronize
1618 * properly we only do this if the device is fully synchronized.
1619 * Can not distinguish V8's first byte from PS/2 packet's
1620 */
1621 if (priv->proto_version != ALPS_PROTO_V8 &&
1622 !psmouse->out_of_sync_cnt &&
1623 (psmouse->packet[0] & 0xc8) == 0x08) {
1624
1625 if (psmouse->pktcnt == 3) {
1626 alps_report_bare_ps2_packet(psmouse, psmouse->packet,
1627 true);
1628 return PSMOUSE_FULL_PACKET;
1629 }
1630 return PSMOUSE_GOOD_DATA;
1631 }
1632
1633 /* Check for PS/2 packet stuffed in the middle of ALPS packet. */
1634
1635 if ((priv->flags & ALPS_PS2_INTERLEAVED) &&
1636 psmouse->pktcnt >= 4 && (psmouse->packet[3] & 0x0f) == 0x0f) {
1637 return alps_handle_interleaved_ps2(psmouse);
1638 }
1639
1640 if (!alps_is_valid_first_byte(priv, psmouse->packet[0])) {
1641 psmouse_dbg(psmouse,
1642 "refusing packet[0] = %x (mask0 = %x, byte0 = %x)\n",
1643 psmouse->packet[0], priv->mask0, priv->byte0);
1644 return PSMOUSE_BAD_DATA;
1645 }
1646
1647 /* Bytes 2 - pktsize should have 0 in the highest bit */
1648 if (priv->proto_version < ALPS_PROTO_V5 &&
1649 psmouse->pktcnt >= 2 && psmouse->pktcnt <= psmouse->pktsize &&
1650 (psmouse->packet[psmouse->pktcnt - 1] & 0x80)) {
1651 psmouse_dbg(psmouse, "refusing packet[%i] = %x\n",
1652 psmouse->pktcnt - 1,
1653 psmouse->packet[psmouse->pktcnt - 1]);
1654
1655 if (priv->proto_version == ALPS_PROTO_V3_RUSHMORE &&
1656 psmouse->pktcnt == psmouse->pktsize) {
1657 /*
1658 * Some Dell boxes, such as Latitude E6440 or E7440
1659 * with closed lid, quite often smash last byte of
1660 * otherwise valid packet with 0xff. Given that the
1661 * next packet is very likely to be valid let's
1662 * report PSMOUSE_FULL_PACKET but not process data,
1663 * rather than reporting PSMOUSE_BAD_DATA and
1664 * filling the logs.
1665 */
1666 return PSMOUSE_FULL_PACKET;
1667 }
1668
1669 return PSMOUSE_BAD_DATA;
1670 }
1671
1672 if ((priv->proto_version == ALPS_PROTO_V7 &&
1673 !alps_is_valid_package_v7(psmouse)) ||
1674 (priv->proto_version == ALPS_PROTO_V8 &&
1675 !alps_is_valid_package_ss4_v2(psmouse))) {
1676 psmouse_dbg(psmouse, "refusing packet[%i] = %x\n",
1677 psmouse->pktcnt - 1,
1678 psmouse->packet[psmouse->pktcnt - 1]);
1679 return PSMOUSE_BAD_DATA;
1680 }
1681
1682 if (psmouse->pktcnt == psmouse->pktsize) {
1683 priv->process_packet(psmouse);
1684 return PSMOUSE_FULL_PACKET;
1685 }
1686
1687 return PSMOUSE_GOOD_DATA;
1688}
1689
1690static int alps_command_mode_send_nibble(struct psmouse *psmouse, int nibble)
1691{
1692 struct ps2dev *ps2dev = &psmouse->ps2dev;
1693 struct alps_data *priv = psmouse->private;
1694 int command;
1695 unsigned char *param;
1696 unsigned char dummy[4];
1697
1698 BUG_ON(nibble > 0xf);
1699
1700 command = priv->nibble_commands[nibble].command;
1701 param = (command & 0x0f00) ?
1702 dummy : (unsigned char *)&priv->nibble_commands[nibble].data;
1703
1704 if (ps2_command(ps2dev, param, command))
1705 return -1;
1706
1707 return 0;
1708}
1709
1710static int alps_command_mode_set_addr(struct psmouse *psmouse, int addr)
1711{
1712 struct ps2dev *ps2dev = &psmouse->ps2dev;
1713 struct alps_data *priv = psmouse->private;
1714 int i, nibble;
1715
1716 if (ps2_command(ps2dev, NULL, priv->addr_command))
1717 return -1;
1718
1719 for (i = 12; i >= 0; i -= 4) {
1720 nibble = (addr >> i) & 0xf;
1721 if (alps_command_mode_send_nibble(psmouse, nibble))
1722 return -1;
1723 }
1724
1725 return 0;
1726}
1727
1728static int __alps_command_mode_read_reg(struct psmouse *psmouse, int addr)
1729{
1730 struct ps2dev *ps2dev = &psmouse->ps2dev;
1731 unsigned char param[4];
1732
1733 if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
1734 return -1;
1735
1736 /*
1737 * The address being read is returned in the first two bytes
1738 * of the result. Check that this address matches the expected
1739 * address.
1740 */
1741 if (addr != ((param[0] << 8) | param[1]))
1742 return -1;
1743
1744 return param[2];
1745}
1746
1747static int alps_command_mode_read_reg(struct psmouse *psmouse, int addr)
1748{
1749 if (alps_command_mode_set_addr(psmouse, addr))
1750 return -1;
1751 return __alps_command_mode_read_reg(psmouse, addr);
1752}
1753
1754static int __alps_command_mode_write_reg(struct psmouse *psmouse, u8 value)
1755{
1756 if (alps_command_mode_send_nibble(psmouse, (value >> 4) & 0xf))
1757 return -1;
1758 if (alps_command_mode_send_nibble(psmouse, value & 0xf))
1759 return -1;
1760 return 0;
1761}
1762
1763static int alps_command_mode_write_reg(struct psmouse *psmouse, int addr,
1764 u8 value)
1765{
1766 if (alps_command_mode_set_addr(psmouse, addr))
1767 return -1;
1768 return __alps_command_mode_write_reg(psmouse, value);
1769}
1770
1771static int alps_rpt_cmd(struct psmouse *psmouse, int init_command,
1772 int repeated_command, unsigned char *param)
1773{
1774 struct ps2dev *ps2dev = &psmouse->ps2dev;
1775
1776 param[0] = 0;
1777 if (init_command && ps2_command(ps2dev, param, init_command))
1778 return -EIO;
1779
1780 if (ps2_command(ps2dev, NULL, repeated_command) ||
1781 ps2_command(ps2dev, NULL, repeated_command) ||
1782 ps2_command(ps2dev, NULL, repeated_command))
1783 return -EIO;
1784
1785 param[0] = param[1] = param[2] = 0xff;
1786 if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
1787 return -EIO;
1788
1789 psmouse_dbg(psmouse, "%2.2X report: %3ph\n",
1790 repeated_command, param);
1791 return 0;
1792}
1793
1794static bool alps_check_valid_firmware_id(unsigned char id[])
1795{
1796 if (id[0] == 0x73)
1797 return true;
1798
1799 if (id[0] == 0x88 &&
1800 (id[1] == 0x07 ||
1801 id[1] == 0x08 ||
1802 (id[1] & 0xf0) == 0xb0 ||
1803 (id[1] & 0xf0) == 0xc0)) {
1804 return true;
1805 }
1806
1807 return false;
1808}
1809
1810static int alps_enter_command_mode(struct psmouse *psmouse)
1811{
1812 unsigned char param[4];
1813
1814 if (alps_rpt_cmd(psmouse, 0, PSMOUSE_CMD_RESET_WRAP, param)) {
1815 psmouse_err(psmouse, "failed to enter command mode\n");
1816 return -1;
1817 }
1818
1819 if (!alps_check_valid_firmware_id(param)) {
1820 psmouse_dbg(psmouse,
1821 "unknown response while entering command mode\n");
1822 return -1;
1823 }
1824 return 0;
1825}
1826
1827static inline int alps_exit_command_mode(struct psmouse *psmouse)
1828{
1829 struct ps2dev *ps2dev = &psmouse->ps2dev;
1830 if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM))
1831 return -1;
1832 return 0;
1833}
1834
1835/*
1836 * For DualPoint devices select the device that should respond to
1837 * subsequent commands. It looks like glidepad is behind stickpointer,
1838 * I'd thought it would be other way around...
1839 */
1840static int alps_passthrough_mode_v2(struct psmouse *psmouse, bool enable)
1841{
1842 struct ps2dev *ps2dev = &psmouse->ps2dev;
1843 int cmd = enable ? PSMOUSE_CMD_SETSCALE21 : PSMOUSE_CMD_SETSCALE11;
1844
1845 if (ps2_command(ps2dev, NULL, cmd) ||
1846 ps2_command(ps2dev, NULL, cmd) ||
1847 ps2_command(ps2dev, NULL, cmd) ||
1848 ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE))
1849 return -1;
1850
1851 /* we may get 3 more bytes, just ignore them */
1852 ps2_drain(ps2dev, 3, 100);
1853
1854 return 0;
1855}
1856
1857static int alps_absolute_mode_v1_v2(struct psmouse *psmouse)
1858{
1859 struct ps2dev *ps2dev = &psmouse->ps2dev;
1860
1861 /* Try ALPS magic knock - 4 disable before enable */
1862 if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
1863 ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
1864 ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
1865 ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
1866 ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE))
1867 return -1;
1868
1869 /*
1870 * Switch mouse to poll (remote) mode so motion data will not
1871 * get in our way
1872 */
1873 return ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL);
1874}
1875
1876static int alps_monitor_mode_send_word(struct psmouse *psmouse, u16 word)
1877{
1878 int i, nibble;
1879
1880 /*
1881 * b0-b11 are valid bits, send sequence is inverse.
1882 * e.g. when word = 0x0123, nibble send sequence is 3, 2, 1
1883 */
1884 for (i = 0; i <= 8; i += 4) {
1885 nibble = (word >> i) & 0xf;
1886 if (alps_command_mode_send_nibble(psmouse, nibble))
1887 return -1;
1888 }
1889
1890 return 0;
1891}
1892
1893static int alps_monitor_mode_write_reg(struct psmouse *psmouse,
1894 u16 addr, u16 value)
1895{
1896 struct ps2dev *ps2dev = &psmouse->ps2dev;
1897
1898 /* 0x0A0 is the command to write the word */
1899 if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE) ||
1900 alps_monitor_mode_send_word(psmouse, 0x0A0) ||
1901 alps_monitor_mode_send_word(psmouse, addr) ||
1902 alps_monitor_mode_send_word(psmouse, value) ||
1903 ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE))
1904 return -1;
1905
1906 return 0;
1907}
1908
1909static int alps_monitor_mode(struct psmouse *psmouse, bool enable)
1910{
1911 struct ps2dev *ps2dev = &psmouse->ps2dev;
1912
1913 if (enable) {
1914 /* EC E9 F5 F5 E7 E6 E7 E9 to enter monitor mode */
1915 if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) ||
1916 ps2_command(ps2dev, NULL, PSMOUSE_CMD_GETINFO) ||
1917 ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
1918 ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
1919 ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
1920 ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
1921 ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
1922 ps2_command(ps2dev, NULL, PSMOUSE_CMD_GETINFO))
1923 return -1;
1924 } else {
1925 /* EC to exit monitor mode */
1926 if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP))
1927 return -1;
1928 }
1929
1930 return 0;
1931}
1932
1933static int alps_absolute_mode_v6(struct psmouse *psmouse)
1934{
1935 u16 reg_val = 0x181;
1936 int ret;
1937
1938 /* enter monitor mode, to write the register */
1939 if (alps_monitor_mode(psmouse, true))
1940 return -1;
1941
1942 ret = alps_monitor_mode_write_reg(psmouse, 0x000, reg_val);
1943
1944 if (alps_monitor_mode(psmouse, false))
1945 ret = -1;
1946
1947 return ret;
1948}
1949
1950static int alps_get_status(struct psmouse *psmouse, char *param)
1951{
1952 /* Get status: 0xF5 0xF5 0xF5 0xE9 */
1953 if (alps_rpt_cmd(psmouse, 0, PSMOUSE_CMD_DISABLE, param))
1954 return -1;
1955
1956 return 0;
1957}
1958
1959/*
1960 * Turn touchpad tapping on or off. The sequences are:
1961 * 0xE9 0xF5 0xF5 0xF3 0x0A to enable,
1962 * 0xE9 0xF5 0xF5 0xE8 0x00 to disable.
1963 * My guess that 0xE9 (GetInfo) is here as a sync point.
1964 * For models that also have stickpointer (DualPoints) its tapping
1965 * is controlled separately (0xE6 0xE6 0xE6 0xF3 0x14|0x0A) but
1966 * we don't fiddle with it.
1967 */
1968static int alps_tap_mode(struct psmouse *psmouse, int enable)
1969{
1970 struct ps2dev *ps2dev = &psmouse->ps2dev;
1971 int cmd = enable ? PSMOUSE_CMD_SETRATE : PSMOUSE_CMD_SETRES;
1972 unsigned char tap_arg = enable ? 0x0A : 0x00;
1973 unsigned char param[4];
1974
1975 if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO) ||
1976 ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
1977 ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
1978 ps2_command(ps2dev, &tap_arg, cmd))
1979 return -1;
1980
1981 if (alps_get_status(psmouse, param))
1982 return -1;
1983
1984 return 0;
1985}
1986
1987/*
1988 * alps_poll() - poll the touchpad for current motion packet.
1989 * Used in resync.
1990 */
1991static int alps_poll(struct psmouse *psmouse)
1992{
1993 struct alps_data *priv = psmouse->private;
1994 unsigned char buf[sizeof(psmouse->packet)];
1995 bool poll_failed;
1996
1997 if (priv->flags & ALPS_PASS)
1998 alps_passthrough_mode_v2(psmouse, true);
1999
2000 poll_failed = ps2_command(&psmouse->ps2dev, buf,
2001 PSMOUSE_CMD_POLL | (psmouse->pktsize << 8)) < 0;
2002
2003 if (priv->flags & ALPS_PASS)
2004 alps_passthrough_mode_v2(psmouse, false);
2005
2006 if (poll_failed || (buf[0] & priv->mask0) != priv->byte0)
2007 return -1;
2008
2009 if ((psmouse->badbyte & 0xc8) == 0x08) {
2010/*
2011 * Poll the track stick ...
2012 */
2013 if (ps2_command(&psmouse->ps2dev, buf, PSMOUSE_CMD_POLL | (3 << 8)))
2014 return -1;
2015 }
2016
2017 memcpy(psmouse->packet, buf, sizeof(buf));
2018 return 0;
2019}
2020
2021static int alps_hw_init_v1_v2(struct psmouse *psmouse)
2022{
2023 struct alps_data *priv = psmouse->private;
2024
2025 if ((priv->flags & ALPS_PASS) &&
2026 alps_passthrough_mode_v2(psmouse, true)) {
2027 return -1;
2028 }
2029
2030 if (alps_tap_mode(psmouse, true)) {
2031 psmouse_warn(psmouse, "Failed to enable hardware tapping\n");
2032 return -1;
2033 }
2034
2035 if (alps_absolute_mode_v1_v2(psmouse)) {
2036 psmouse_err(psmouse, "Failed to enable absolute mode\n");
2037 return -1;
2038 }
2039
2040 if ((priv->flags & ALPS_PASS) &&
2041 alps_passthrough_mode_v2(psmouse, false)) {
2042 return -1;
2043 }
2044
2045 /* ALPS needs stream mode, otherwise it won't report any data */
2046 if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSTREAM)) {
2047 psmouse_err(psmouse, "Failed to enable stream mode\n");
2048 return -1;
2049 }
2050
2051 return 0;
2052}
2053
2054/* Must be in passthrough mode when calling this function */
2055static int alps_trackstick_enter_extended_mode_v3_v6(struct psmouse *psmouse)
2056{
2057 unsigned char param[2] = {0xC8, 0x14};
2058
2059 if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
2060 ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
2061 ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
2062 ps2_command(&psmouse->ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE) ||
2063 ps2_command(&psmouse->ps2dev, ¶m[1], PSMOUSE_CMD_SETRATE))
2064 return -1;
2065
2066 return 0;
2067}
2068
2069static int alps_hw_init_v6(struct psmouse *psmouse)
2070{
2071 int ret;
2072
2073 /* Enter passthrough mode to let trackpoint enter 6byte raw mode */
2074 if (alps_passthrough_mode_v2(psmouse, true))
2075 return -1;
2076
2077 ret = alps_trackstick_enter_extended_mode_v3_v6(psmouse);
2078
2079 if (alps_passthrough_mode_v2(psmouse, false))
2080 return -1;
2081
2082 if (ret)
2083 return ret;
2084
2085 if (alps_absolute_mode_v6(psmouse)) {
2086 psmouse_err(psmouse, "Failed to enable absolute mode\n");
2087 return -1;
2088 }
2089
2090 return 0;
2091}
2092
2093/*
2094 * Enable or disable passthrough mode to the trackstick.
2095 */
2096static int alps_passthrough_mode_v3(struct psmouse *psmouse,
2097 int reg_base, bool enable)
2098{
2099 int reg_val, ret = -1;
2100
2101 if (alps_enter_command_mode(psmouse))
2102 return -1;
2103
2104 reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x0008);
2105 if (reg_val == -1)
2106 goto error;
2107
2108 if (enable)
2109 reg_val |= 0x01;
2110 else
2111 reg_val &= ~0x01;
2112
2113 ret = __alps_command_mode_write_reg(psmouse, reg_val);
2114
2115error:
2116 if (alps_exit_command_mode(psmouse))
2117 ret = -1;
2118 return ret;
2119}
2120
2121/* Must be in command mode when calling this function */
2122static int alps_absolute_mode_v3(struct psmouse *psmouse)
2123{
2124 int reg_val;
2125
2126 reg_val = alps_command_mode_read_reg(psmouse, 0x0004);
2127 if (reg_val == -1)
2128 return -1;
2129
2130 reg_val |= 0x06;
2131 if (__alps_command_mode_write_reg(psmouse, reg_val))
2132 return -1;
2133
2134 return 0;
2135}
2136
2137static int alps_probe_trackstick_v3_v7(struct psmouse *psmouse, int reg_base)
2138{
2139 int ret = -EIO, reg_val;
2140
2141 if (alps_enter_command_mode(psmouse))
2142 goto error;
2143
2144 reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x08);
2145 if (reg_val == -1)
2146 goto error;
2147
2148 /* bit 7: trackstick is present */
2149 ret = reg_val & 0x80 ? 0 : -ENODEV;
2150
2151error:
2152 alps_exit_command_mode(psmouse);
2153 return ret;
2154}
2155
2156static int alps_setup_trackstick_v3(struct psmouse *psmouse, int reg_base)
2157{
2158 int ret = 0;
2159 int reg_val;
2160 unsigned char param[4];
2161
2162 /*
2163 * We need to configure trackstick to report data for touchpad in
2164 * extended format. And also we need to tell touchpad to expect data
2165 * from trackstick in extended format. Without this configuration
2166 * trackstick packets sent from touchpad are in basic format which is
2167 * different from what we expect.
2168 */
2169
2170 if (alps_passthrough_mode_v3(psmouse, reg_base, true))
2171 return -EIO;
2172
2173 /*
2174 * E7 report for the trackstick
2175 *
2176 * There have been reports of failures to seem to trace back
2177 * to the above trackstick check failing. When these occur
2178 * this E7 report fails, so when that happens we continue
2179 * with the assumption that there isn't a trackstick after
2180 * all.
2181 */
2182 if (alps_rpt_cmd(psmouse, 0, PSMOUSE_CMD_SETSCALE21, param)) {
2183 psmouse_warn(psmouse, "Failed to initialize trackstick (E7 report failed)\n");
2184 ret = -ENODEV;
2185 } else {
2186 psmouse_dbg(psmouse, "trackstick E7 report: %3ph\n", param);
2187 if (alps_trackstick_enter_extended_mode_v3_v6(psmouse)) {
2188 psmouse_err(psmouse, "Failed to enter into trackstick extended mode\n");
2189 ret = -EIO;
2190 }
2191 }
2192
2193 if (alps_passthrough_mode_v3(psmouse, reg_base, false))
2194 return -EIO;
2195
2196 if (ret)
2197 return ret;
2198
2199 if (alps_enter_command_mode(psmouse))
2200 return -EIO;
2201
2202 reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x08);
2203 if (reg_val == -1) {
2204 ret = -EIO;
2205 } else {
2206 /*
2207 * Tell touchpad that trackstick is now in extended mode.
2208 * If bit 1 isn't set the packet format is different.
2209 */
2210 reg_val |= BIT(1);
2211 if (__alps_command_mode_write_reg(psmouse, reg_val))
2212 ret = -EIO;
2213 }
2214
2215 if (alps_exit_command_mode(psmouse))
2216 return -EIO;
2217
2218 return ret;
2219}
2220
2221static int alps_hw_init_v3(struct psmouse *psmouse)
2222{
2223 struct alps_data *priv = psmouse->private;
2224 struct ps2dev *ps2dev = &psmouse->ps2dev;
2225 int reg_val;
2226 unsigned char param[4];
2227
2228 if ((priv->flags & ALPS_DUALPOINT) &&
2229 alps_setup_trackstick_v3(psmouse, ALPS_REG_BASE_PINNACLE) == -EIO)
2230 goto error;
2231
2232 if (alps_enter_command_mode(psmouse) ||
2233 alps_absolute_mode_v3(psmouse)) {
2234 psmouse_err(psmouse, "Failed to enter absolute mode\n");
2235 goto error;
2236 }
2237
2238 reg_val = alps_command_mode_read_reg(psmouse, 0x0006);
2239 if (reg_val == -1)
2240 goto error;
2241 if (__alps_command_mode_write_reg(psmouse, reg_val | 0x01))
2242 goto error;
2243
2244 reg_val = alps_command_mode_read_reg(psmouse, 0x0007);
2245 if (reg_val == -1)
2246 goto error;
2247 if (__alps_command_mode_write_reg(psmouse, reg_val | 0x01))
2248 goto error;
2249
2250 if (alps_command_mode_read_reg(psmouse, 0x0144) == -1)
2251 goto error;
2252 if (__alps_command_mode_write_reg(psmouse, 0x04))
2253 goto error;
2254
2255 if (alps_command_mode_read_reg(psmouse, 0x0159) == -1)
2256 goto error;
2257 if (__alps_command_mode_write_reg(psmouse, 0x03))
2258 goto error;
2259
2260 if (alps_command_mode_read_reg(psmouse, 0x0163) == -1)
2261 goto error;
2262 if (alps_command_mode_write_reg(psmouse, 0x0163, 0x03))
2263 goto error;
2264
2265 if (alps_command_mode_read_reg(psmouse, 0x0162) == -1)
2266 goto error;
2267 if (alps_command_mode_write_reg(psmouse, 0x0162, 0x04))
2268 goto error;
2269
2270 alps_exit_command_mode(psmouse);
2271
2272 /* Set rate and enable data reporting */
2273 param[0] = 0x64;
2274 if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE) ||
2275 ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)) {
2276 psmouse_err(psmouse, "Failed to enable data reporting\n");
2277 return -1;
2278 }
2279
2280 return 0;
2281
2282error:
2283 /*
2284 * Leaving the touchpad in command mode will essentially render
2285 * it unusable until the machine reboots, so exit it here just
2286 * to be safe
2287 */
2288 alps_exit_command_mode(psmouse);
2289 return -1;
2290}
2291
2292static int alps_get_v3_v7_resolution(struct psmouse *psmouse, int reg_pitch)
2293{
2294 int reg, x_pitch, y_pitch, x_electrode, y_electrode, x_phys, y_phys;
2295 struct alps_data *priv = psmouse->private;
2296
2297 reg = alps_command_mode_read_reg(psmouse, reg_pitch);
2298 if (reg < 0)
2299 return reg;
2300
2301 x_pitch = (s8)(reg << 4) >> 4; /* sign extend lower 4 bits */
2302 x_pitch = 50 + 2 * x_pitch; /* In 0.1 mm units */
2303
2304 y_pitch = (s8)reg >> 4; /* sign extend upper 4 bits */
2305 y_pitch = 36 + 2 * y_pitch; /* In 0.1 mm units */
2306
2307 reg = alps_command_mode_read_reg(psmouse, reg_pitch + 1);
2308 if (reg < 0)
2309 return reg;
2310
2311 x_electrode = (s8)(reg << 4) >> 4; /* sign extend lower 4 bits */
2312 x_electrode = 17 + x_electrode;
2313
2314 y_electrode = (s8)reg >> 4; /* sign extend upper 4 bits */
2315 y_electrode = 13 + y_electrode;
2316
2317 x_phys = x_pitch * (x_electrode - 1); /* In 0.1 mm units */
2318 y_phys = y_pitch * (y_electrode - 1); /* In 0.1 mm units */
2319
2320 priv->x_res = priv->x_max * 10 / x_phys; /* units / mm */
2321 priv->y_res = priv->y_max * 10 / y_phys; /* units / mm */
2322
2323 psmouse_dbg(psmouse,
2324 "pitch %dx%d num-electrodes %dx%d physical size %dx%d mm res %dx%d\n",
2325 x_pitch, y_pitch, x_electrode, y_electrode,
2326 x_phys / 10, y_phys / 10, priv->x_res, priv->y_res);
2327
2328 return 0;
2329}
2330
2331static int alps_hw_init_rushmore_v3(struct psmouse *psmouse)
2332{
2333 struct alps_data *priv = psmouse->private;
2334 struct ps2dev *ps2dev = &psmouse->ps2dev;
2335 int reg_val, ret = -1;
2336
2337 if (priv->flags & ALPS_DUALPOINT) {
2338 reg_val = alps_setup_trackstick_v3(psmouse,
2339 ALPS_REG_BASE_RUSHMORE);
2340 if (reg_val == -EIO)
2341 goto error;
2342 }
2343
2344 if (alps_enter_command_mode(psmouse) ||
2345 alps_command_mode_read_reg(psmouse, 0xc2d9) == -1 ||
2346 alps_command_mode_write_reg(psmouse, 0xc2cb, 0x00))
2347 goto error;
2348
2349 if (alps_get_v3_v7_resolution(psmouse, 0xc2da))
2350 goto error;
2351
2352 reg_val = alps_command_mode_read_reg(psmouse, 0xc2c6);
2353 if (reg_val == -1)
2354 goto error;
2355 if (__alps_command_mode_write_reg(psmouse, reg_val & 0xfd))
2356 goto error;
2357
2358 if (alps_command_mode_write_reg(psmouse, 0xc2c9, 0x64))
2359 goto error;
2360
2361 /* enter absolute mode */
2362 reg_val = alps_command_mode_read_reg(psmouse, 0xc2c4);
2363 if (reg_val == -1)
2364 goto error;
2365 if (__alps_command_mode_write_reg(psmouse, reg_val | 0x02))
2366 goto error;
2367
2368 alps_exit_command_mode(psmouse);
2369 return ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE);
2370
2371error:
2372 alps_exit_command_mode(psmouse);
2373 return ret;
2374}
2375
2376/* Must be in command mode when calling this function */
2377static int alps_absolute_mode_v4(struct psmouse *psmouse)
2378{
2379 int reg_val;
2380
2381 reg_val = alps_command_mode_read_reg(psmouse, 0x0004);
2382 if (reg_val == -1)
2383 return -1;
2384
2385 reg_val |= 0x02;
2386 if (__alps_command_mode_write_reg(psmouse, reg_val))
2387 return -1;
2388
2389 return 0;
2390}
2391
2392static int alps_hw_init_v4(struct psmouse *psmouse)
2393{
2394 struct ps2dev *ps2dev = &psmouse->ps2dev;
2395 unsigned char param[4];
2396
2397 if (alps_enter_command_mode(psmouse))
2398 goto error;
2399
2400 if (alps_absolute_mode_v4(psmouse)) {
2401 psmouse_err(psmouse, "Failed to enter absolute mode\n");
2402 goto error;
2403 }
2404
2405 if (alps_command_mode_write_reg(psmouse, 0x0007, 0x8c))
2406 goto error;
2407
2408 if (alps_command_mode_write_reg(psmouse, 0x0149, 0x03))
2409 goto error;
2410
2411 if (alps_command_mode_write_reg(psmouse, 0x0160, 0x03))
2412 goto error;
2413
2414 if (alps_command_mode_write_reg(psmouse, 0x017f, 0x15))
2415 goto error;
2416
2417 if (alps_command_mode_write_reg(psmouse, 0x0151, 0x01))
2418 goto error;
2419
2420 if (alps_command_mode_write_reg(psmouse, 0x0168, 0x03))
2421 goto error;
2422
2423 if (alps_command_mode_write_reg(psmouse, 0x014a, 0x03))
2424 goto error;
2425
2426 if (alps_command_mode_write_reg(psmouse, 0x0161, 0x03))
2427 goto error;
2428
2429 alps_exit_command_mode(psmouse);
2430
2431 /*
2432 * This sequence changes the output from a 9-byte to an
2433 * 8-byte format. All the same data seems to be present,
2434 * just in a more compact format.
2435 */
2436 param[0] = 0xc8;
2437 param[1] = 0x64;
2438 param[2] = 0x50;
2439 if (ps2_command(ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE) ||
2440 ps2_command(ps2dev, ¶m[1], PSMOUSE_CMD_SETRATE) ||
2441 ps2_command(ps2dev, ¶m[2], PSMOUSE_CMD_SETRATE) ||
2442 ps2_command(ps2dev, param, PSMOUSE_CMD_GETID))
2443 return -1;
2444
2445 /* Set rate and enable data reporting */
2446 param[0] = 0x64;
2447 if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE) ||
2448 ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)) {
2449 psmouse_err(psmouse, "Failed to enable data reporting\n");
2450 return -1;
2451 }
2452
2453 return 0;
2454
2455error:
2456 /*
2457 * Leaving the touchpad in command mode will essentially render
2458 * it unusable until the machine reboots, so exit it here just
2459 * to be safe
2460 */
2461 alps_exit_command_mode(psmouse);
2462 return -1;
2463}
2464
2465static int alps_get_otp_values_ss4_v2(struct psmouse *psmouse,
2466 unsigned char index, unsigned char otp[])
2467{
2468 struct ps2dev *ps2dev = &psmouse->ps2dev;
2469
2470 switch (index) {
2471 case 0:
2472 if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) ||
2473 ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) ||
2474 ps2_command(ps2dev, otp, PSMOUSE_CMD_GETINFO))
2475 return -1;
2476
2477 break;
2478
2479 case 1:
2480 if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL) ||
2481 ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL) ||
2482 ps2_command(ps2dev, otp, PSMOUSE_CMD_GETINFO))
2483 return -1;
2484
2485 break;
2486 }
2487
2488 return 0;
2489}
2490
2491static int alps_update_device_area_ss4_v2(unsigned char otp[][4],
2492 struct alps_data *priv)
2493{
2494 int num_x_electrode;
2495 int num_y_electrode;
2496 int x_pitch, y_pitch, x_phys, y_phys;
2497
2498 if (IS_SS4PLUS_DEV(priv->dev_id)) {
2499 num_x_electrode =
2500 SS4PLUS_NUMSENSOR_XOFFSET + (otp[0][2] & 0x0F);
2501 num_y_electrode =
2502 SS4PLUS_NUMSENSOR_YOFFSET + ((otp[0][2] >> 4) & 0x0F);
2503
2504 priv->x_max =
2505 (num_x_electrode - 1) * SS4PLUS_COUNT_PER_ELECTRODE;
2506 priv->y_max =
2507 (num_y_electrode - 1) * SS4PLUS_COUNT_PER_ELECTRODE;
2508
2509 x_pitch = (otp[0][1] & 0x0F) + SS4PLUS_MIN_PITCH_MM;
2510 y_pitch = ((otp[0][1] >> 4) & 0x0F) + SS4PLUS_MIN_PITCH_MM;
2511
2512 } else {
2513 num_x_electrode =
2514 SS4_NUMSENSOR_XOFFSET + (otp[1][0] & 0x0F);
2515 num_y_electrode =
2516 SS4_NUMSENSOR_YOFFSET + ((otp[1][0] >> 4) & 0x0F);
2517
2518 priv->x_max =
2519 (num_x_electrode - 1) * SS4_COUNT_PER_ELECTRODE;
2520 priv->y_max =
2521 (num_y_electrode - 1) * SS4_COUNT_PER_ELECTRODE;
2522
2523 x_pitch = ((otp[1][2] >> 2) & 0x07) + SS4_MIN_PITCH_MM;
2524 y_pitch = ((otp[1][2] >> 5) & 0x07) + SS4_MIN_PITCH_MM;
2525 }
2526
2527 x_phys = x_pitch * (num_x_electrode - 1); /* In 0.1 mm units */
2528 y_phys = y_pitch * (num_y_electrode - 1); /* In 0.1 mm units */
2529
2530 priv->x_res = priv->x_max * 10 / x_phys; /* units / mm */
2531 priv->y_res = priv->y_max * 10 / y_phys; /* units / mm */
2532
2533 return 0;
2534}
2535
2536static int alps_update_btn_info_ss4_v2(unsigned char otp[][4],
2537 struct alps_data *priv)
2538{
2539 unsigned char is_btnless;
2540
2541 if (IS_SS4PLUS_DEV(priv->dev_id))
2542 is_btnless = (otp[1][0] >> 1) & 0x01;
2543 else
2544 is_btnless = (otp[1][1] >> 3) & 0x01;
2545
2546 if (is_btnless)
2547 priv->flags |= ALPS_BUTTONPAD;
2548
2549 return 0;
2550}
2551
2552static int alps_update_dual_info_ss4_v2(unsigned char otp[][4],
2553 struct alps_data *priv,
2554 struct psmouse *psmouse)
2555{
2556 bool is_dual = false;
2557 int reg_val = 0;
2558 struct ps2dev *ps2dev = &psmouse->ps2dev;
2559
2560 if (IS_SS4PLUS_DEV(priv->dev_id)) {
2561 is_dual = (otp[0][0] >> 4) & 0x01;
2562
2563 if (!is_dual) {
2564 /* For support TrackStick of Thinkpad L/E series */
2565 if (alps_exit_command_mode(psmouse) == 0 &&
2566 alps_enter_command_mode(psmouse) == 0) {
2567 reg_val = alps_command_mode_read_reg(psmouse,
2568 0xD7);
2569 }
2570 alps_exit_command_mode(psmouse);
2571 ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE);
2572
2573 if (reg_val == 0x0C || reg_val == 0x1D)
2574 is_dual = true;
2575 }
2576 }
2577
2578 if (is_dual)
2579 priv->flags |= ALPS_DUALPOINT |
2580 ALPS_DUALPOINT_WITH_PRESSURE;
2581
2582 return 0;
2583}
2584
2585static int alps_set_defaults_ss4_v2(struct psmouse *psmouse,
2586 struct alps_data *priv)
2587{
2588 unsigned char otp[2][4];
2589
2590 memset(otp, 0, sizeof(otp));
2591
2592 if (alps_get_otp_values_ss4_v2(psmouse, 1, &otp[1][0]) ||
2593 alps_get_otp_values_ss4_v2(psmouse, 0, &otp[0][0]))
2594 return -1;
2595
2596 alps_update_device_area_ss4_v2(otp, priv);
2597
2598 alps_update_btn_info_ss4_v2(otp, priv);
2599
2600 alps_update_dual_info_ss4_v2(otp, priv, psmouse);
2601
2602 return 0;
2603}
2604
2605static int alps_dolphin_get_device_area(struct psmouse *psmouse,
2606 struct alps_data *priv)
2607{
2608 struct ps2dev *ps2dev = &psmouse->ps2dev;
2609 unsigned char param[4] = {0};
2610 int num_x_electrode, num_y_electrode;
2611
2612 if (alps_enter_command_mode(psmouse))
2613 return -1;
2614
2615 param[0] = 0x0a;
2616 if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) ||
2617 ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL) ||
2618 ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL) ||
2619 ps2_command(ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE) ||
2620 ps2_command(ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE))
2621 return -1;
2622
2623 if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
2624 return -1;
2625
2626 /*
2627 * Dolphin's sensor line number is not fixed. It can be calculated
2628 * by adding the device's register value with DOLPHIN_PROFILE_X/YOFFSET.
2629 * Further more, we can get device's x_max and y_max by multiplying
2630 * sensor line number with DOLPHIN_COUNT_PER_ELECTRODE.
2631 *
2632 * e.g. When we get register's sensor_x = 11 & sensor_y = 8,
2633 * real sensor line number X = 11 + 8 = 19, and
2634 * real sensor line number Y = 8 + 1 = 9.
2635 * So, x_max = (19 - 1) * 64 = 1152, and
2636 * y_max = (9 - 1) * 64 = 512.
2637 */
2638 num_x_electrode = DOLPHIN_PROFILE_XOFFSET + (param[2] & 0x0F);
2639 num_y_electrode = DOLPHIN_PROFILE_YOFFSET + ((param[2] >> 4) & 0x0F);
2640 priv->x_bits = num_x_electrode;
2641 priv->y_bits = num_y_electrode;
2642 priv->x_max = (num_x_electrode - 1) * DOLPHIN_COUNT_PER_ELECTRODE;
2643 priv->y_max = (num_y_electrode - 1) * DOLPHIN_COUNT_PER_ELECTRODE;
2644
2645 if (alps_exit_command_mode(psmouse))
2646 return -1;
2647
2648 return 0;
2649}
2650
2651static int alps_hw_init_dolphin_v1(struct psmouse *psmouse)
2652{
2653 struct ps2dev *ps2dev = &psmouse->ps2dev;
2654 unsigned char param[2];
2655
2656 /* This is dolphin "v1" as empirically defined by florin9doi */
2657 param[0] = 0x64;
2658 param[1] = 0x28;
2659
2660 if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) ||
2661 ps2_command(ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE) ||
2662 ps2_command(ps2dev, ¶m[1], PSMOUSE_CMD_SETRATE))
2663 return -1;
2664
2665 return 0;
2666}
2667
2668static int alps_hw_init_v7(struct psmouse *psmouse)
2669{
2670 struct ps2dev *ps2dev = &psmouse->ps2dev;
2671 int reg_val, ret = -1;
2672
2673 if (alps_enter_command_mode(psmouse) ||
2674 alps_command_mode_read_reg(psmouse, 0xc2d9) == -1)
2675 goto error;
2676
2677 if (alps_get_v3_v7_resolution(psmouse, 0xc397))
2678 goto error;
2679
2680 if (alps_command_mode_write_reg(psmouse, 0xc2c9, 0x64))
2681 goto error;
2682
2683 reg_val = alps_command_mode_read_reg(psmouse, 0xc2c4);
2684 if (reg_val == -1)
2685 goto error;
2686 if (__alps_command_mode_write_reg(psmouse, reg_val | 0x02))
2687 goto error;
2688
2689 alps_exit_command_mode(psmouse);
2690 return ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE);
2691
2692error:
2693 alps_exit_command_mode(psmouse);
2694 return ret;
2695}
2696
2697static int alps_hw_init_ss4_v2(struct psmouse *psmouse)
2698{
2699 struct ps2dev *ps2dev = &psmouse->ps2dev;
2700 char param[2] = {0x64, 0x28};
2701 int ret = -1;
2702
2703 /* enter absolute mode */
2704 if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) ||
2705 ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) ||
2706 ps2_command(ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE) ||
2707 ps2_command(ps2dev, ¶m[1], PSMOUSE_CMD_SETRATE)) {
2708 goto error;
2709 }
2710
2711 /* T.B.D. Decread noise packet number, delete in the future */
2712 if (alps_exit_command_mode(psmouse) ||
2713 alps_enter_command_mode(psmouse) ||
2714 alps_command_mode_write_reg(psmouse, 0x001D, 0x20)) {
2715 goto error;
2716 }
2717 alps_exit_command_mode(psmouse);
2718
2719 return ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE);
2720
2721error:
2722 alps_exit_command_mode(psmouse);
2723 return ret;
2724}
2725
2726static int alps_set_protocol(struct psmouse *psmouse,
2727 struct alps_data *priv,
2728 const struct alps_protocol_info *protocol)
2729{
2730 psmouse->private = priv;
2731
2732 timer_setup(&priv->timer, alps_flush_packet, 0);
2733
2734 priv->proto_version = protocol->version;
2735 priv->byte0 = protocol->byte0;
2736 priv->mask0 = protocol->mask0;
2737 priv->flags = protocol->flags;
2738
2739 priv->x_max = 2000;
2740 priv->y_max = 1400;
2741 priv->x_bits = 15;
2742 priv->y_bits = 11;
2743
2744 switch (priv->proto_version) {
2745 case ALPS_PROTO_V1:
2746 case ALPS_PROTO_V2:
2747 priv->hw_init = alps_hw_init_v1_v2;
2748 priv->process_packet = alps_process_packet_v1_v2;
2749 priv->set_abs_params = alps_set_abs_params_st;
2750 priv->x_max = 1023;
2751 priv->y_max = 767;
2752 if (dmi_check_system(alps_dmi_has_separate_stick_buttons))
2753 priv->flags |= ALPS_STICK_BITS;
2754 break;
2755
2756 case ALPS_PROTO_V3:
2757 priv->hw_init = alps_hw_init_v3;
2758 priv->process_packet = alps_process_packet_v3;
2759 priv->set_abs_params = alps_set_abs_params_semi_mt;
2760 priv->decode_fields = alps_decode_pinnacle;
2761 priv->nibble_commands = alps_v3_nibble_commands;
2762 priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
2763
2764 if (alps_probe_trackstick_v3_v7(psmouse,
2765 ALPS_REG_BASE_PINNACLE) < 0)
2766 priv->flags &= ~ALPS_DUALPOINT;
2767
2768 break;
2769
2770 case ALPS_PROTO_V3_RUSHMORE:
2771 priv->hw_init = alps_hw_init_rushmore_v3;
2772 priv->process_packet = alps_process_packet_v3;
2773 priv->set_abs_params = alps_set_abs_params_semi_mt;
2774 priv->decode_fields = alps_decode_rushmore;
2775 priv->nibble_commands = alps_v3_nibble_commands;
2776 priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
2777 priv->x_bits = 16;
2778 priv->y_bits = 12;
2779
2780 if (alps_probe_trackstick_v3_v7(psmouse,
2781 ALPS_REG_BASE_RUSHMORE) < 0)
2782 priv->flags &= ~ALPS_DUALPOINT;
2783
2784 break;
2785
2786 case ALPS_PROTO_V4:
2787 priv->hw_init = alps_hw_init_v4;
2788 priv->process_packet = alps_process_packet_v4;
2789 priv->set_abs_params = alps_set_abs_params_semi_mt;
2790 priv->nibble_commands = alps_v4_nibble_commands;
2791 priv->addr_command = PSMOUSE_CMD_DISABLE;
2792 break;
2793
2794 case ALPS_PROTO_V5:
2795 priv->hw_init = alps_hw_init_dolphin_v1;
2796 priv->process_packet = alps_process_touchpad_packet_v3_v5;
2797 priv->decode_fields = alps_decode_dolphin;
2798 priv->set_abs_params = alps_set_abs_params_semi_mt;
2799 priv->nibble_commands = alps_v3_nibble_commands;
2800 priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
2801 priv->x_bits = 23;
2802 priv->y_bits = 12;
2803
2804 if (alps_dolphin_get_device_area(psmouse, priv))
2805 return -EIO;
2806
2807 break;
2808
2809 case ALPS_PROTO_V6:
2810 priv->hw_init = alps_hw_init_v6;
2811 priv->process_packet = alps_process_packet_v6;
2812 priv->set_abs_params = alps_set_abs_params_st;
2813 priv->nibble_commands = alps_v6_nibble_commands;
2814 priv->x_max = 2047;
2815 priv->y_max = 1535;
2816 break;
2817
2818 case ALPS_PROTO_V7:
2819 priv->hw_init = alps_hw_init_v7;
2820 priv->process_packet = alps_process_packet_v7;
2821 priv->decode_fields = alps_decode_packet_v7;
2822 priv->set_abs_params = alps_set_abs_params_v7;
2823 priv->nibble_commands = alps_v3_nibble_commands;
2824 priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
2825 priv->x_max = 0xfff;
2826 priv->y_max = 0x7ff;
2827
2828 if (priv->fw_ver[1] != 0xba)
2829 priv->flags |= ALPS_BUTTONPAD;
2830
2831 if (alps_probe_trackstick_v3_v7(psmouse, ALPS_REG_BASE_V7) < 0)
2832 priv->flags &= ~ALPS_DUALPOINT;
2833
2834 break;
2835
2836 case ALPS_PROTO_V8:
2837 priv->hw_init = alps_hw_init_ss4_v2;
2838 priv->process_packet = alps_process_packet_ss4_v2;
2839 priv->decode_fields = alps_decode_ss4_v2;
2840 priv->set_abs_params = alps_set_abs_params_ss4_v2;
2841 priv->nibble_commands = alps_v3_nibble_commands;
2842 priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
2843
2844 if (alps_set_defaults_ss4_v2(psmouse, priv))
2845 return -EIO;
2846
2847 break;
2848 }
2849
2850 return 0;
2851}
2852
2853static const struct alps_protocol_info *alps_match_table(unsigned char *e7,
2854 unsigned char *ec)
2855{
2856 const struct alps_model_info *model;
2857 int i;
2858
2859 for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) {
2860 model = &alps_model_data[i];
2861
2862 if (!memcmp(e7, model->signature, sizeof(model->signature)))
2863 return &model->protocol_info;
2864 }
2865
2866 return NULL;
2867}
2868
2869static bool alps_is_cs19_trackpoint(struct psmouse *psmouse)
2870{
2871 u8 param[2] = { 0 };
2872
2873 if (ps2_command(&psmouse->ps2dev,
2874 param, MAKE_PS2_CMD(0, 2, TP_READ_ID)))
2875 return false;
2876
2877 /*
2878 * param[0] contains the trackpoint device variant_id while
2879 * param[1] contains the firmware_id. So far all alps
2880 * trackpoint-only devices have their variant_ids equal
2881 * TP_VARIANT_ALPS and their firmware_ids are in 0x20~0x2f range.
2882 */
2883 return param[0] == TP_VARIANT_ALPS && ((param[1] & 0xf0) == 0x20);
2884}
2885
2886static int alps_identify(struct psmouse *psmouse, struct alps_data *priv)
2887{
2888 const struct alps_protocol_info *protocol;
2889 unsigned char e6[4], e7[4], ec[4];
2890 int error;
2891
2892 /*
2893 * First try "E6 report".
2894 * ALPS should return 0,0,10 or 0,0,100 if no buttons are pressed.
2895 * The bits 0-2 of the first byte will be 1s if some buttons are
2896 * pressed.
2897 */
2898 if (alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES,
2899 PSMOUSE_CMD_SETSCALE11, e6))
2900 return -EIO;
2901
2902 if ((e6[0] & 0xf8) != 0 || e6[1] != 0 || (e6[2] != 10 && e6[2] != 100))
2903 return -EINVAL;
2904
2905 /*
2906 * Now get the "E7" and "EC" reports. These will uniquely identify
2907 * most ALPS touchpads.
2908 */
2909 if (alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES,
2910 PSMOUSE_CMD_SETSCALE21, e7) ||
2911 alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES,
2912 PSMOUSE_CMD_RESET_WRAP, ec) ||
2913 alps_exit_command_mode(psmouse))
2914 return -EIO;
2915
2916 protocol = alps_match_table(e7, ec);
2917 if (!protocol) {
2918 if (e7[0] == 0x73 && e7[1] == 0x02 && e7[2] == 0x64 &&
2919 ec[2] == 0x8a) {
2920 protocol = &alps_v4_protocol_data;
2921 } else if (e7[0] == 0x73 && e7[1] == 0x03 && e7[2] == 0x50 &&
2922 ec[0] == 0x73 && (ec[1] == 0x01 || ec[1] == 0x02)) {
2923 protocol = &alps_v5_protocol_data;
2924 } else if (ec[0] == 0x88 &&
2925 ((ec[1] & 0xf0) == 0xb0 || (ec[1] & 0xf0) == 0xc0)) {
2926 protocol = &alps_v7_protocol_data;
2927 } else if (ec[0] == 0x88 && ec[1] == 0x08) {
2928 protocol = &alps_v3_rushmore_data;
2929 } else if (ec[0] == 0x88 && ec[1] == 0x07 &&
2930 ec[2] >= 0x90 && ec[2] <= 0x9d) {
2931 protocol = &alps_v3_protocol_data;
2932 } else if (e7[0] == 0x73 && e7[1] == 0x03 &&
2933 (e7[2] == 0x14 || e7[2] == 0x28)) {
2934 protocol = &alps_v8_protocol_data;
2935 } else if (e7[0] == 0x73 && e7[1] == 0x03 && e7[2] == 0xc8) {
2936 protocol = &alps_v9_protocol_data;
2937 psmouse_warn(psmouse,
2938 "Unsupported ALPS V9 touchpad: E7=%3ph, EC=%3ph\n",
2939 e7, ec);
2940 return -EINVAL;
2941 } else {
2942 psmouse_dbg(psmouse,
2943 "Likely not an ALPS touchpad: E7=%3ph, EC=%3ph\n", e7, ec);
2944 return -EINVAL;
2945 }
2946 }
2947
2948 if (priv) {
2949 /* Save Device ID and Firmware version */
2950 memcpy(priv->dev_id, e7, 3);
2951 memcpy(priv->fw_ver, ec, 3);
2952 error = alps_set_protocol(psmouse, priv, protocol);
2953 if (error)
2954 return error;
2955 }
2956
2957 return 0;
2958}
2959
2960static int alps_reconnect(struct psmouse *psmouse)
2961{
2962 struct alps_data *priv = psmouse->private;
2963
2964 psmouse_reset(psmouse);
2965
2966 if (alps_identify(psmouse, priv) < 0)
2967 return -1;
2968
2969 return priv->hw_init(psmouse);
2970}
2971
2972static void alps_disconnect(struct psmouse *psmouse)
2973{
2974 struct alps_data *priv = psmouse->private;
2975
2976 psmouse_reset(psmouse);
2977 timer_shutdown_sync(&priv->timer);
2978 if (priv->dev2)
2979 input_unregister_device(priv->dev2);
2980 if (!IS_ERR_OR_NULL(priv->dev3))
2981 input_unregister_device(priv->dev3);
2982 kfree(priv);
2983}
2984
2985static void alps_set_abs_params_st(struct alps_data *priv,
2986 struct input_dev *dev1)
2987{
2988 input_set_abs_params(dev1, ABS_X, 0, priv->x_max, 0, 0);
2989 input_set_abs_params(dev1, ABS_Y, 0, priv->y_max, 0, 0);
2990 input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0);
2991}
2992
2993static void alps_set_abs_params_mt_common(struct alps_data *priv,
2994 struct input_dev *dev1)
2995{
2996 input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, priv->x_max, 0, 0);
2997 input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, priv->y_max, 0, 0);
2998
2999 input_abs_set_res(dev1, ABS_MT_POSITION_X, priv->x_res);
3000 input_abs_set_res(dev1, ABS_MT_POSITION_Y, priv->y_res);
3001
3002 set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit);
3003 set_bit(BTN_TOOL_QUADTAP, dev1->keybit);
3004}
3005
3006static void alps_set_abs_params_semi_mt(struct alps_data *priv,
3007 struct input_dev *dev1)
3008{
3009 alps_set_abs_params_mt_common(priv, dev1);
3010 input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0);
3011
3012 input_mt_init_slots(dev1, MAX_TOUCHES,
3013 INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED |
3014 INPUT_MT_SEMI_MT);
3015}
3016
3017static void alps_set_abs_params_v7(struct alps_data *priv,
3018 struct input_dev *dev1)
3019{
3020 alps_set_abs_params_mt_common(priv, dev1);
3021 set_bit(BTN_TOOL_QUINTTAP, dev1->keybit);
3022
3023 input_mt_init_slots(dev1, MAX_TOUCHES,
3024 INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED |
3025 INPUT_MT_TRACK);
3026
3027 set_bit(BTN_TOOL_QUINTTAP, dev1->keybit);
3028}
3029
3030static void alps_set_abs_params_ss4_v2(struct alps_data *priv,
3031 struct input_dev *dev1)
3032{
3033 alps_set_abs_params_mt_common(priv, dev1);
3034 input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0);
3035 set_bit(BTN_TOOL_QUINTTAP, dev1->keybit);
3036
3037 input_mt_init_slots(dev1, MAX_TOUCHES,
3038 INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED |
3039 INPUT_MT_TRACK);
3040}
3041
3042int alps_init(struct psmouse *psmouse)
3043{
3044 struct alps_data *priv = psmouse->private;
3045 struct input_dev *dev1 = psmouse->dev;
3046 int error;
3047
3048 error = priv->hw_init(psmouse);
3049 if (error)
3050 goto init_fail;
3051
3052 /*
3053 * Undo part of setup done for us by psmouse core since touchpad
3054 * is not a relative device.
3055 */
3056 __clear_bit(EV_REL, dev1->evbit);
3057 __clear_bit(REL_X, dev1->relbit);
3058 __clear_bit(REL_Y, dev1->relbit);
3059
3060 /*
3061 * Now set up our capabilities.
3062 */
3063 dev1->evbit[BIT_WORD(EV_KEY)] |= BIT_MASK(EV_KEY);
3064 dev1->keybit[BIT_WORD(BTN_TOUCH)] |= BIT_MASK(BTN_TOUCH);
3065 dev1->keybit[BIT_WORD(BTN_TOOL_FINGER)] |= BIT_MASK(BTN_TOOL_FINGER);
3066 dev1->keybit[BIT_WORD(BTN_LEFT)] |=
3067 BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT);
3068
3069 dev1->evbit[BIT_WORD(EV_ABS)] |= BIT_MASK(EV_ABS);
3070
3071 priv->set_abs_params(priv, dev1);
3072
3073 if (priv->flags & ALPS_WHEEL) {
3074 dev1->evbit[BIT_WORD(EV_REL)] |= BIT_MASK(EV_REL);
3075 dev1->relbit[BIT_WORD(REL_WHEEL)] |= BIT_MASK(REL_WHEEL);
3076 }
3077
3078 if (priv->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) {
3079 dev1->keybit[BIT_WORD(BTN_FORWARD)] |= BIT_MASK(BTN_FORWARD);
3080 dev1->keybit[BIT_WORD(BTN_BACK)] |= BIT_MASK(BTN_BACK);
3081 }
3082
3083 if (priv->flags & ALPS_FOUR_BUTTONS) {
3084 dev1->keybit[BIT_WORD(BTN_0)] |= BIT_MASK(BTN_0);
3085 dev1->keybit[BIT_WORD(BTN_1)] |= BIT_MASK(BTN_1);
3086 dev1->keybit[BIT_WORD(BTN_2)] |= BIT_MASK(BTN_2);
3087 dev1->keybit[BIT_WORD(BTN_3)] |= BIT_MASK(BTN_3);
3088 } else if (priv->flags & ALPS_BUTTONPAD) {
3089 set_bit(INPUT_PROP_BUTTONPAD, dev1->propbit);
3090 clear_bit(BTN_RIGHT, dev1->keybit);
3091 } else {
3092 dev1->keybit[BIT_WORD(BTN_MIDDLE)] |= BIT_MASK(BTN_MIDDLE);
3093 }
3094
3095 if (priv->flags & ALPS_DUALPOINT) {
3096 struct input_dev *dev2;
3097
3098 dev2 = input_allocate_device();
3099 if (!dev2) {
3100 psmouse_err(psmouse,
3101 "failed to allocate trackstick device\n");
3102 error = -ENOMEM;
3103 goto init_fail;
3104 }
3105
3106 snprintf(priv->phys2, sizeof(priv->phys2), "%s/input1",
3107 psmouse->ps2dev.serio->phys);
3108 dev2->phys = priv->phys2;
3109
3110 /*
3111 * format of input device name is: "protocol vendor name"
3112 * see function psmouse_switch_protocol() in psmouse-base.c
3113 */
3114 dev2->name = "AlpsPS/2 ALPS DualPoint Stick";
3115
3116 dev2->id.bustype = BUS_I8042;
3117 dev2->id.vendor = 0x0002;
3118 dev2->id.product = PSMOUSE_ALPS;
3119 dev2->id.version = priv->proto_version;
3120 dev2->dev.parent = &psmouse->ps2dev.serio->dev;
3121
3122 input_set_capability(dev2, EV_REL, REL_X);
3123 input_set_capability(dev2, EV_REL, REL_Y);
3124 if (priv->flags & ALPS_DUALPOINT_WITH_PRESSURE) {
3125 input_set_capability(dev2, EV_ABS, ABS_PRESSURE);
3126 input_set_abs_params(dev2, ABS_PRESSURE, 0, 127, 0, 0);
3127 }
3128 input_set_capability(dev2, EV_KEY, BTN_LEFT);
3129 input_set_capability(dev2, EV_KEY, BTN_RIGHT);
3130 input_set_capability(dev2, EV_KEY, BTN_MIDDLE);
3131
3132 __set_bit(INPUT_PROP_POINTER, dev2->propbit);
3133 __set_bit(INPUT_PROP_POINTING_STICK, dev2->propbit);
3134
3135 error = input_register_device(dev2);
3136 if (error) {
3137 psmouse_err(psmouse,
3138 "failed to register trackstick device: %d\n",
3139 error);
3140 input_free_device(dev2);
3141 goto init_fail;
3142 }
3143
3144 priv->dev2 = dev2;
3145 }
3146
3147 priv->psmouse = psmouse;
3148
3149 INIT_DELAYED_WORK(&priv->dev3_register_work,
3150 alps_register_bare_ps2_mouse);
3151
3152 psmouse->protocol_handler = alps_process_byte;
3153 psmouse->poll = alps_poll;
3154 psmouse->disconnect = alps_disconnect;
3155 psmouse->reconnect = alps_reconnect;
3156 psmouse->pktsize = priv->proto_version == ALPS_PROTO_V4 ? 8 : 6;
3157
3158 /* We are having trouble resyncing ALPS touchpads so disable it for now */
3159 psmouse->resync_time = 0;
3160
3161 /* Allow 2 invalid packets without resetting device */
3162 psmouse->resetafter = psmouse->pktsize * 2;
3163
3164 return 0;
3165
3166init_fail:
3167 psmouse_reset(psmouse);
3168 /*
3169 * Even though we did not allocate psmouse->private we do free
3170 * it here.
3171 */
3172 kfree(psmouse->private);
3173 psmouse->private = NULL;
3174 return error;
3175}
3176
3177int alps_detect(struct psmouse *psmouse, bool set_properties)
3178{
3179 struct alps_data *priv;
3180 int error;
3181
3182 error = alps_identify(psmouse, NULL);
3183 if (error)
3184 return error;
3185
3186 /*
3187 * ALPS cs19 is a trackpoint-only device, and uses different
3188 * protocol than DualPoint ones, so we return -EINVAL here and let
3189 * trackpoint.c drive this device. If the trackpoint driver is not
3190 * enabled, the device will fall back to a bare PS/2 mouse.
3191 * If ps2_command() fails here, we depend on the immediately
3192 * followed psmouse_reset() to reset the device to normal state.
3193 */
3194 if (alps_is_cs19_trackpoint(psmouse)) {
3195 psmouse_dbg(psmouse,
3196 "ALPS CS19 trackpoint-only device detected, ignoring\n");
3197 return -EINVAL;
3198 }
3199
3200 /*
3201 * Reset the device to make sure it is fully operational:
3202 * on some laptops, like certain Dell Latitudes, we may
3203 * fail to properly detect presence of trackstick if device
3204 * has not been reset.
3205 */
3206 psmouse_reset(psmouse);
3207
3208 priv = kzalloc(sizeof(*priv), GFP_KERNEL);
3209 if (!priv)
3210 return -ENOMEM;
3211
3212 error = alps_identify(psmouse, priv);
3213 if (error) {
3214 kfree(priv);
3215 return error;
3216 }
3217
3218 if (set_properties) {
3219 psmouse->vendor = "ALPS";
3220 psmouse->name = priv->flags & ALPS_DUALPOINT ?
3221 "DualPoint TouchPad" : "GlidePoint";
3222 psmouse->model = priv->proto_version;
3223 } else {
3224 /*
3225 * Destroy alps_data structure we allocated earlier since
3226 * this was just a "trial run". Otherwise we'll keep it
3227 * to be used by alps_init() which has to be called if
3228 * we succeed and set_properties is true.
3229 */
3230 kfree(priv);
3231 psmouse->private = NULL;
3232 }
3233
3234 return 0;
3235}
3236
1/*
2 * ALPS touchpad PS/2 mouse driver
3 *
4 * Copyright (c) 2003 Neil Brown <neilb@cse.unsw.edu.au>
5 * Copyright (c) 2003-2005 Peter Osterlund <petero2@telia.com>
6 * Copyright (c) 2004 Dmitry Torokhov <dtor@mail.ru>
7 * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
8 * Copyright (c) 2009 Sebastian Kapfer <sebastian_kapfer@gmx.net>
9 *
10 * ALPS detection, tap switching and status querying info is taken from
11 * tpconfig utility (by C. Scott Ananian and Bruce Kall).
12 *
13 * This program is free software; you can redistribute it and/or modify it
14 * under the terms of the GNU General Public License version 2 as published by
15 * the Free Software Foundation.
16 */
17
18#include <linux/slab.h>
19#include <linux/input.h>
20#include <linux/input/mt.h>
21#include <linux/serio.h>
22#include <linux/libps2.h>
23
24#include "psmouse.h"
25#include "alps.h"
26
27/*
28 * Definitions for ALPS version 3 and 4 command mode protocol
29 */
30#define ALPS_CMD_NIBBLE_10 0x01f2
31
32#define ALPS_REG_BASE_RUSHMORE 0xc2c0
33#define ALPS_REG_BASE_PINNACLE 0x0000
34
35static const struct alps_nibble_commands alps_v3_nibble_commands[] = {
36 { PSMOUSE_CMD_SETPOLL, 0x00 }, /* 0 */
37 { PSMOUSE_CMD_RESET_DIS, 0x00 }, /* 1 */
38 { PSMOUSE_CMD_SETSCALE21, 0x00 }, /* 2 */
39 { PSMOUSE_CMD_SETRATE, 0x0a }, /* 3 */
40 { PSMOUSE_CMD_SETRATE, 0x14 }, /* 4 */
41 { PSMOUSE_CMD_SETRATE, 0x28 }, /* 5 */
42 { PSMOUSE_CMD_SETRATE, 0x3c }, /* 6 */
43 { PSMOUSE_CMD_SETRATE, 0x50 }, /* 7 */
44 { PSMOUSE_CMD_SETRATE, 0x64 }, /* 8 */
45 { PSMOUSE_CMD_SETRATE, 0xc8 }, /* 9 */
46 { ALPS_CMD_NIBBLE_10, 0x00 }, /* a */
47 { PSMOUSE_CMD_SETRES, 0x00 }, /* b */
48 { PSMOUSE_CMD_SETRES, 0x01 }, /* c */
49 { PSMOUSE_CMD_SETRES, 0x02 }, /* d */
50 { PSMOUSE_CMD_SETRES, 0x03 }, /* e */
51 { PSMOUSE_CMD_SETSCALE11, 0x00 }, /* f */
52};
53
54static const struct alps_nibble_commands alps_v4_nibble_commands[] = {
55 { PSMOUSE_CMD_ENABLE, 0x00 }, /* 0 */
56 { PSMOUSE_CMD_RESET_DIS, 0x00 }, /* 1 */
57 { PSMOUSE_CMD_SETSCALE21, 0x00 }, /* 2 */
58 { PSMOUSE_CMD_SETRATE, 0x0a }, /* 3 */
59 { PSMOUSE_CMD_SETRATE, 0x14 }, /* 4 */
60 { PSMOUSE_CMD_SETRATE, 0x28 }, /* 5 */
61 { PSMOUSE_CMD_SETRATE, 0x3c }, /* 6 */
62 { PSMOUSE_CMD_SETRATE, 0x50 }, /* 7 */
63 { PSMOUSE_CMD_SETRATE, 0x64 }, /* 8 */
64 { PSMOUSE_CMD_SETRATE, 0xc8 }, /* 9 */
65 { ALPS_CMD_NIBBLE_10, 0x00 }, /* a */
66 { PSMOUSE_CMD_SETRES, 0x00 }, /* b */
67 { PSMOUSE_CMD_SETRES, 0x01 }, /* c */
68 { PSMOUSE_CMD_SETRES, 0x02 }, /* d */
69 { PSMOUSE_CMD_SETRES, 0x03 }, /* e */
70 { PSMOUSE_CMD_SETSCALE11, 0x00 }, /* f */
71};
72
73static const struct alps_nibble_commands alps_v6_nibble_commands[] = {
74 { PSMOUSE_CMD_ENABLE, 0x00 }, /* 0 */
75 { PSMOUSE_CMD_SETRATE, 0x0a }, /* 1 */
76 { PSMOUSE_CMD_SETRATE, 0x14 }, /* 2 */
77 { PSMOUSE_CMD_SETRATE, 0x28 }, /* 3 */
78 { PSMOUSE_CMD_SETRATE, 0x3c }, /* 4 */
79 { PSMOUSE_CMD_SETRATE, 0x50 }, /* 5 */
80 { PSMOUSE_CMD_SETRATE, 0x64 }, /* 6 */
81 { PSMOUSE_CMD_SETRATE, 0xc8 }, /* 7 */
82 { PSMOUSE_CMD_GETID, 0x00 }, /* 8 */
83 { PSMOUSE_CMD_GETINFO, 0x00 }, /* 9 */
84 { PSMOUSE_CMD_SETRES, 0x00 }, /* a */
85 { PSMOUSE_CMD_SETRES, 0x01 }, /* b */
86 { PSMOUSE_CMD_SETRES, 0x02 }, /* c */
87 { PSMOUSE_CMD_SETRES, 0x03 }, /* d */
88 { PSMOUSE_CMD_SETSCALE21, 0x00 }, /* e */
89 { PSMOUSE_CMD_SETSCALE11, 0x00 }, /* f */
90};
91
92
93#define ALPS_DUALPOINT 0x02 /* touchpad has trackstick */
94#define ALPS_PASS 0x04 /* device has a pass-through port */
95
96#define ALPS_WHEEL 0x08 /* hardware wheel present */
97#define ALPS_FW_BK_1 0x10 /* front & back buttons present */
98#define ALPS_FW_BK_2 0x20 /* front & back buttons present */
99#define ALPS_FOUR_BUTTONS 0x40 /* 4 direction button present */
100#define ALPS_PS2_INTERLEAVED 0x80 /* 3-byte PS/2 packet interleaved with
101 6-byte ALPS packet */
102
103static const struct alps_model_info alps_model_data[] = {
104 { { 0x32, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */
105 { { 0x33, 0x02, 0x0a }, 0x00, ALPS_PROTO_V1, 0x88, 0xf8, 0 }, /* UMAX-530T */
106 { { 0x53, 0x02, 0x0a }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
107 { { 0x53, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
108 { { 0x60, 0x03, 0xc8 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 }, /* HP ze1115 */
109 { { 0x63, 0x02, 0x0a }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
110 { { 0x63, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
111 { { 0x63, 0x02, 0x28 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_FW_BK_2 }, /* Fujitsu Siemens S6010 */
112 { { 0x63, 0x02, 0x3c }, 0x00, ALPS_PROTO_V2, 0x8f, 0x8f, ALPS_WHEEL }, /* Toshiba Satellite S2400-103 */
113 { { 0x63, 0x02, 0x50 }, 0x00, ALPS_PROTO_V2, 0xef, 0xef, ALPS_FW_BK_1 }, /* NEC Versa L320 */
114 { { 0x63, 0x02, 0x64 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
115 { { 0x63, 0x03, 0xc8 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D800 */
116 { { 0x73, 0x00, 0x0a }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_DUALPOINT }, /* ThinkPad R61 8918-5QG */
117 { { 0x73, 0x02, 0x0a }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
118 { { 0x73, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_FW_BK_2 }, /* Ahtec Laptop */
119 { { 0x20, 0x02, 0x0e }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* XXX */
120 { { 0x22, 0x02, 0x0a }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT },
121 { { 0x22, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D600 */
122 /* Dell Latitude E5500, E6400, E6500, Precision M4400 */
123 { { 0x62, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf,
124 ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },
125 { { 0x73, 0x00, 0x14 }, 0x00, ALPS_PROTO_V6, 0xff, 0xff, ALPS_DUALPOINT }, /* Dell XT2 */
126 { { 0x73, 0x02, 0x50 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_FOUR_BUTTONS }, /* Dell Vostro 1400 */
127 { { 0x52, 0x01, 0x14 }, 0x00, ALPS_PROTO_V2, 0xff, 0xff,
128 ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, /* Toshiba Tecra A11-11L */
129 { { 0x73, 0x02, 0x64 }, 0x8a, ALPS_PROTO_V4, 0x8f, 0x8f, 0 },
130};
131
132static void alps_set_abs_params_st(struct alps_data *priv,
133 struct input_dev *dev1);
134static void alps_set_abs_params_mt(struct alps_data *priv,
135 struct input_dev *dev1);
136
137/*
138 * XXX - this entry is suspicious. First byte has zero lower nibble,
139 * which is what a normal mouse would report. Also, the value 0x0e
140 * isn't valid per PS/2 spec.
141 */
142
143/* Packet formats are described in Documentation/input/alps.txt */
144
145static bool alps_is_valid_first_byte(struct alps_data *priv,
146 unsigned char data)
147{
148 return (data & priv->mask0) == priv->byte0;
149}
150
151static void alps_report_buttons(struct psmouse *psmouse,
152 struct input_dev *dev1, struct input_dev *dev2,
153 int left, int right, int middle)
154{
155 struct input_dev *dev;
156
157 /*
158 * If shared button has already been reported on the
159 * other device (dev2) then this event should be also
160 * sent through that device.
161 */
162 dev = test_bit(BTN_LEFT, dev2->key) ? dev2 : dev1;
163 input_report_key(dev, BTN_LEFT, left);
164
165 dev = test_bit(BTN_RIGHT, dev2->key) ? dev2 : dev1;
166 input_report_key(dev, BTN_RIGHT, right);
167
168 dev = test_bit(BTN_MIDDLE, dev2->key) ? dev2 : dev1;
169 input_report_key(dev, BTN_MIDDLE, middle);
170
171 /*
172 * Sync the _other_ device now, we'll do the first
173 * device later once we report the rest of the events.
174 */
175 input_sync(dev2);
176}
177
178static void alps_process_packet_v1_v2(struct psmouse *psmouse)
179{
180 struct alps_data *priv = psmouse->private;
181 unsigned char *packet = psmouse->packet;
182 struct input_dev *dev = psmouse->dev;
183 struct input_dev *dev2 = priv->dev2;
184 int x, y, z, ges, fin, left, right, middle;
185 int back = 0, forward = 0;
186
187 if (priv->proto_version == ALPS_PROTO_V1) {
188 left = packet[2] & 0x10;
189 right = packet[2] & 0x08;
190 middle = 0;
191 x = packet[1] | ((packet[0] & 0x07) << 7);
192 y = packet[4] | ((packet[3] & 0x07) << 7);
193 z = packet[5];
194 } else {
195 left = packet[3] & 1;
196 right = packet[3] & 2;
197 middle = packet[3] & 4;
198 x = packet[1] | ((packet[2] & 0x78) << (7 - 3));
199 y = packet[4] | ((packet[3] & 0x70) << (7 - 4));
200 z = packet[5];
201 }
202
203 if (priv->flags & ALPS_FW_BK_1) {
204 back = packet[0] & 0x10;
205 forward = packet[2] & 4;
206 }
207
208 if (priv->flags & ALPS_FW_BK_2) {
209 back = packet[3] & 4;
210 forward = packet[2] & 4;
211 if ((middle = forward && back))
212 forward = back = 0;
213 }
214
215 ges = packet[2] & 1;
216 fin = packet[2] & 2;
217
218 if ((priv->flags & ALPS_DUALPOINT) && z == 127) {
219 input_report_rel(dev2, REL_X, (x > 383 ? (x - 768) : x));
220 input_report_rel(dev2, REL_Y, -(y > 255 ? (y - 512) : y));
221
222 alps_report_buttons(psmouse, dev2, dev, left, right, middle);
223
224 input_sync(dev2);
225 return;
226 }
227
228 alps_report_buttons(psmouse, dev, dev2, left, right, middle);
229
230 /* Convert hardware tap to a reasonable Z value */
231 if (ges && !fin)
232 z = 40;
233
234 /*
235 * A "tap and drag" operation is reported by the hardware as a transition
236 * from (!fin && ges) to (fin && ges). This should be translated to the
237 * sequence Z>0, Z==0, Z>0, so the Z==0 event has to be generated manually.
238 */
239 if (ges && fin && !priv->prev_fin) {
240 input_report_abs(dev, ABS_X, x);
241 input_report_abs(dev, ABS_Y, y);
242 input_report_abs(dev, ABS_PRESSURE, 0);
243 input_report_key(dev, BTN_TOOL_FINGER, 0);
244 input_sync(dev);
245 }
246 priv->prev_fin = fin;
247
248 if (z > 30)
249 input_report_key(dev, BTN_TOUCH, 1);
250 if (z < 25)
251 input_report_key(dev, BTN_TOUCH, 0);
252
253 if (z > 0) {
254 input_report_abs(dev, ABS_X, x);
255 input_report_abs(dev, ABS_Y, y);
256 }
257
258 input_report_abs(dev, ABS_PRESSURE, z);
259 input_report_key(dev, BTN_TOOL_FINGER, z > 0);
260
261 if (priv->flags & ALPS_WHEEL)
262 input_report_rel(dev, REL_WHEEL, ((packet[2] << 1) & 0x08) - ((packet[0] >> 4) & 0x07));
263
264 if (priv->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) {
265 input_report_key(dev, BTN_FORWARD, forward);
266 input_report_key(dev, BTN_BACK, back);
267 }
268
269 if (priv->flags & ALPS_FOUR_BUTTONS) {
270 input_report_key(dev, BTN_0, packet[2] & 4);
271 input_report_key(dev, BTN_1, packet[0] & 0x10);
272 input_report_key(dev, BTN_2, packet[3] & 4);
273 input_report_key(dev, BTN_3, packet[0] & 0x20);
274 }
275
276 input_sync(dev);
277}
278
279/*
280 * Process bitmap data for V5 protocols. Return value is null.
281 *
282 * The bitmaps don't have enough data to track fingers, so this function
283 * only generates points representing a bounding box of at most two contacts.
284 * These two points are returned in x1, y1, x2, and y2.
285 */
286static void alps_process_bitmap_dolphin(struct alps_data *priv,
287 struct alps_fields *fields,
288 int *x1, int *y1, int *x2, int *y2)
289{
290 int box_middle_x, box_middle_y;
291 unsigned int x_map, y_map;
292 unsigned char start_bit, end_bit;
293 unsigned char x_msb, x_lsb, y_msb, y_lsb;
294
295 x_map = fields->x_map;
296 y_map = fields->y_map;
297
298 if (!x_map || !y_map)
299 return;
300
301 /* Get Most-significant and Least-significant bit */
302 x_msb = fls(x_map);
303 x_lsb = ffs(x_map);
304 y_msb = fls(y_map);
305 y_lsb = ffs(y_map);
306
307 /* Most-significant bit should never exceed max sensor line number */
308 if (x_msb > priv->x_bits || y_msb > priv->y_bits)
309 return;
310
311 *x1 = *y1 = *x2 = *y2 = 0;
312
313 if (fields->fingers > 1) {
314 start_bit = priv->x_bits - x_msb;
315 end_bit = priv->x_bits - x_lsb;
316 box_middle_x = (priv->x_max * (start_bit + end_bit)) /
317 (2 * (priv->x_bits - 1));
318
319 start_bit = y_lsb - 1;
320 end_bit = y_msb - 1;
321 box_middle_y = (priv->y_max * (start_bit + end_bit)) /
322 (2 * (priv->y_bits - 1));
323 *x1 = fields->x;
324 *y1 = fields->y;
325 *x2 = 2 * box_middle_x - *x1;
326 *y2 = 2 * box_middle_y - *y1;
327 }
328}
329
330/*
331 * Process bitmap data from v3 and v4 protocols. Returns the number of
332 * fingers detected. A return value of 0 means at least one of the
333 * bitmaps was empty.
334 *
335 * The bitmaps don't have enough data to track fingers, so this function
336 * only generates points representing a bounding box of all contacts.
337 * These points are returned in x1, y1, x2, and y2 when the return value
338 * is greater than 0.
339 */
340static int alps_process_bitmap(struct alps_data *priv,
341 unsigned int x_map, unsigned int y_map,
342 int *x1, int *y1, int *x2, int *y2)
343{
344 struct alps_bitmap_point {
345 int start_bit;
346 int num_bits;
347 };
348
349 int fingers_x = 0, fingers_y = 0, fingers;
350 int i, bit, prev_bit;
351 struct alps_bitmap_point x_low = {0,}, x_high = {0,};
352 struct alps_bitmap_point y_low = {0,}, y_high = {0,};
353 struct alps_bitmap_point *point;
354
355 if (!x_map || !y_map)
356 return 0;
357
358 *x1 = *y1 = *x2 = *y2 = 0;
359
360 prev_bit = 0;
361 point = &x_low;
362 for (i = 0; x_map != 0; i++, x_map >>= 1) {
363 bit = x_map & 1;
364 if (bit) {
365 if (!prev_bit) {
366 point->start_bit = i;
367 fingers_x++;
368 }
369 point->num_bits++;
370 } else {
371 if (prev_bit)
372 point = &x_high;
373 else
374 point->num_bits = 0;
375 }
376 prev_bit = bit;
377 }
378
379 /*
380 * y bitmap is reversed for what we need (lower positions are in
381 * higher bits), so we process from the top end.
382 */
383 y_map = y_map << (sizeof(y_map) * BITS_PER_BYTE - priv->y_bits);
384 prev_bit = 0;
385 point = &y_low;
386 for (i = 0; y_map != 0; i++, y_map <<= 1) {
387 bit = y_map & (1 << (sizeof(y_map) * BITS_PER_BYTE - 1));
388 if (bit) {
389 if (!prev_bit) {
390 point->start_bit = i;
391 fingers_y++;
392 }
393 point->num_bits++;
394 } else {
395 if (prev_bit)
396 point = &y_high;
397 else
398 point->num_bits = 0;
399 }
400 prev_bit = bit;
401 }
402
403 /*
404 * Fingers can overlap, so we use the maximum count of fingers
405 * on either axis as the finger count.
406 */
407 fingers = max(fingers_x, fingers_y);
408
409 /*
410 * If total fingers is > 1 but either axis reports only a single
411 * contact, we have overlapping or adjacent fingers. For the
412 * purposes of creating a bounding box, divide the single contact
413 * (roughly) equally between the two points.
414 */
415 if (fingers > 1) {
416 if (fingers_x == 1) {
417 i = x_low.num_bits / 2;
418 x_low.num_bits = x_low.num_bits - i;
419 x_high.start_bit = x_low.start_bit + i;
420 x_high.num_bits = max(i, 1);
421 } else if (fingers_y == 1) {
422 i = y_low.num_bits / 2;
423 y_low.num_bits = y_low.num_bits - i;
424 y_high.start_bit = y_low.start_bit + i;
425 y_high.num_bits = max(i, 1);
426 }
427 }
428
429 *x1 = (priv->x_max * (2 * x_low.start_bit + x_low.num_bits - 1)) /
430 (2 * (priv->x_bits - 1));
431 *y1 = (priv->y_max * (2 * y_low.start_bit + y_low.num_bits - 1)) /
432 (2 * (priv->y_bits - 1));
433
434 if (fingers > 1) {
435 *x2 = (priv->x_max *
436 (2 * x_high.start_bit + x_high.num_bits - 1)) /
437 (2 * (priv->x_bits - 1));
438 *y2 = (priv->y_max *
439 (2 * y_high.start_bit + y_high.num_bits - 1)) /
440 (2 * (priv->y_bits - 1));
441 }
442
443 return fingers;
444}
445
446static void alps_set_slot(struct input_dev *dev, int slot, bool active,
447 int x, int y)
448{
449 input_mt_slot(dev, slot);
450 input_mt_report_slot_state(dev, MT_TOOL_FINGER, active);
451 if (active) {
452 input_report_abs(dev, ABS_MT_POSITION_X, x);
453 input_report_abs(dev, ABS_MT_POSITION_Y, y);
454 }
455}
456
457static void alps_report_semi_mt_data(struct input_dev *dev, int num_fingers,
458 int x1, int y1, int x2, int y2)
459{
460 alps_set_slot(dev, 0, num_fingers != 0, x1, y1);
461 alps_set_slot(dev, 1, num_fingers == 2, x2, y2);
462}
463
464static void alps_process_trackstick_packet_v3(struct psmouse *psmouse)
465{
466 struct alps_data *priv = psmouse->private;
467 unsigned char *packet = psmouse->packet;
468 struct input_dev *dev = priv->dev2;
469 int x, y, z, left, right, middle;
470
471 /* Sanity check packet */
472 if (!(packet[0] & 0x40)) {
473 psmouse_dbg(psmouse, "Bad trackstick packet, discarding\n");
474 return;
475 }
476
477 /*
478 * There's a special packet that seems to indicate the end
479 * of a stream of trackstick data. Filter these out.
480 */
481 if (packet[1] == 0x7f && packet[2] == 0x7f && packet[4] == 0x7f)
482 return;
483
484 x = (s8)(((packet[0] & 0x20) << 2) | (packet[1] & 0x7f));
485 y = (s8)(((packet[0] & 0x10) << 3) | (packet[2] & 0x7f));
486 z = (packet[4] & 0x7c) >> 2;
487
488 /*
489 * The x and y values tend to be quite large, and when used
490 * alone the trackstick is difficult to use. Scale them down
491 * to compensate.
492 */
493 x /= 8;
494 y /= 8;
495
496 input_report_rel(dev, REL_X, x);
497 input_report_rel(dev, REL_Y, -y);
498
499 /*
500 * Most ALPS models report the trackstick buttons in the touchpad
501 * packets, but a few report them here. No reliable way has been
502 * found to differentiate between the models upfront, so we enable
503 * the quirk in response to seeing a button press in the trackstick
504 * packet.
505 */
506 left = packet[3] & 0x01;
507 right = packet[3] & 0x02;
508 middle = packet[3] & 0x04;
509
510 if (!(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS) &&
511 (left || right || middle))
512 priv->quirks |= ALPS_QUIRK_TRACKSTICK_BUTTONS;
513
514 if (priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS) {
515 input_report_key(dev, BTN_LEFT, left);
516 input_report_key(dev, BTN_RIGHT, right);
517 input_report_key(dev, BTN_MIDDLE, middle);
518 }
519
520 input_sync(dev);
521 return;
522}
523
524static void alps_decode_buttons_v3(struct alps_fields *f, unsigned char *p)
525{
526 f->left = !!(p[3] & 0x01);
527 f->right = !!(p[3] & 0x02);
528 f->middle = !!(p[3] & 0x04);
529
530 f->ts_left = !!(p[3] & 0x10);
531 f->ts_right = !!(p[3] & 0x20);
532 f->ts_middle = !!(p[3] & 0x40);
533}
534
535static void alps_decode_pinnacle(struct alps_fields *f, unsigned char *p,
536 struct psmouse *psmouse)
537{
538 f->first_mp = !!(p[4] & 0x40);
539 f->is_mp = !!(p[0] & 0x40);
540
541 f->fingers = (p[5] & 0x3) + 1;
542 f->x_map = ((p[4] & 0x7e) << 8) |
543 ((p[1] & 0x7f) << 2) |
544 ((p[0] & 0x30) >> 4);
545 f->y_map = ((p[3] & 0x70) << 4) |
546 ((p[2] & 0x7f) << 1) |
547 (p[4] & 0x01);
548
549 f->x = ((p[1] & 0x7f) << 4) | ((p[4] & 0x30) >> 2) |
550 ((p[0] & 0x30) >> 4);
551 f->y = ((p[2] & 0x7f) << 4) | (p[4] & 0x0f);
552 f->z = p[5] & 0x7f;
553
554 alps_decode_buttons_v3(f, p);
555}
556
557static void alps_decode_rushmore(struct alps_fields *f, unsigned char *p,
558 struct psmouse *psmouse)
559{
560 alps_decode_pinnacle(f, p, psmouse);
561
562 f->x_map |= (p[5] & 0x10) << 11;
563 f->y_map |= (p[5] & 0x20) << 6;
564}
565
566static void alps_decode_dolphin(struct alps_fields *f, unsigned char *p,
567 struct psmouse *psmouse)
568{
569 u64 palm_data = 0;
570 struct alps_data *priv = psmouse->private;
571
572 f->first_mp = !!(p[0] & 0x02);
573 f->is_mp = !!(p[0] & 0x20);
574
575 if (!f->is_mp) {
576 f->x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7));
577 f->y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3));
578 f->z = (p[0] & 4) ? 0 : p[5] & 0x7f;
579 alps_decode_buttons_v3(f, p);
580 } else {
581 f->fingers = ((p[0] & 0x6) >> 1 |
582 (p[0] & 0x10) >> 2);
583
584 palm_data = (p[1] & 0x7f) |
585 ((p[2] & 0x7f) << 7) |
586 ((p[4] & 0x7f) << 14) |
587 ((p[5] & 0x7f) << 21) |
588 ((p[3] & 0x07) << 28) |
589 (((u64)p[3] & 0x70) << 27) |
590 (((u64)p[0] & 0x01) << 34);
591
592 /* Y-profile is stored in P(0) to p(n-1), n = y_bits; */
593 f->y_map = palm_data & (BIT(priv->y_bits) - 1);
594
595 /* X-profile is stored in p(n) to p(n+m-1), m = x_bits; */
596 f->x_map = (palm_data >> priv->y_bits) &
597 (BIT(priv->x_bits) - 1);
598 }
599}
600
601static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse)
602{
603 struct alps_data *priv = psmouse->private;
604 unsigned char *packet = psmouse->packet;
605 struct input_dev *dev = psmouse->dev;
606 struct input_dev *dev2 = priv->dev2;
607 int x1 = 0, y1 = 0, x2 = 0, y2 = 0;
608 int fingers = 0, bmap_fn;
609 struct alps_fields f = {0};
610
611 priv->decode_fields(&f, packet, psmouse);
612
613 /*
614 * There's no single feature of touchpad position and bitmap packets
615 * that can be used to distinguish between them. We rely on the fact
616 * that a bitmap packet should always follow a position packet with
617 * bit 6 of packet[4] set.
618 */
619 if (priv->multi_packet) {
620 /*
621 * Sometimes a position packet will indicate a multi-packet
622 * sequence, but then what follows is another position
623 * packet. Check for this, and when it happens process the
624 * position packet as usual.
625 */
626 if (f.is_mp) {
627 fingers = f.fingers;
628 if (priv->proto_version == ALPS_PROTO_V3) {
629 bmap_fn = alps_process_bitmap(priv, f.x_map,
630 f.y_map, &x1, &y1,
631 &x2, &y2);
632
633 /*
634 * We shouldn't report more than one finger if
635 * we don't have two coordinates.
636 */
637 if (fingers > 1 && bmap_fn < 2)
638 fingers = bmap_fn;
639
640 /* Now process position packet */
641 priv->decode_fields(&f, priv->multi_data,
642 psmouse);
643 } else {
644 /*
645 * Because Dolphin uses position packet's
646 * coordinate data as Pt1 and uses it to
647 * calculate Pt2, so we need to do position
648 * packet decode first.
649 */
650 priv->decode_fields(&f, priv->multi_data,
651 psmouse);
652
653 /*
654 * Since Dolphin's finger number is reliable,
655 * there is no need to compare with bmap_fn.
656 */
657 alps_process_bitmap_dolphin(priv, &f, &x1, &y1,
658 &x2, &y2);
659 }
660 } else {
661 priv->multi_packet = 0;
662 }
663 }
664
665 /*
666 * Bit 6 of byte 0 is not usually set in position packets. The only
667 * times it seems to be set is in situations where the data is
668 * suspect anyway, e.g. a palm resting flat on the touchpad. Given
669 * this combined with the fact that this bit is useful for filtering
670 * out misidentified bitmap packets, we reject anything with this
671 * bit set.
672 */
673 if (f.is_mp)
674 return;
675
676 if (!priv->multi_packet && f.first_mp) {
677 priv->multi_packet = 1;
678 memcpy(priv->multi_data, packet, sizeof(priv->multi_data));
679 return;
680 }
681
682 priv->multi_packet = 0;
683
684 /*
685 * Sometimes the hardware sends a single packet with z = 0
686 * in the middle of a stream. Real releases generate packets
687 * with x, y, and z all zero, so these seem to be flukes.
688 * Ignore them.
689 */
690 if (f.x && f.y && !f.z)
691 return;
692
693 /*
694 * If we don't have MT data or the bitmaps were empty, we have
695 * to rely on ST data.
696 */
697 if (!fingers) {
698 x1 = f.x;
699 y1 = f.y;
700 fingers = f.z > 0 ? 1 : 0;
701 }
702
703 if (f.z >= 64)
704 input_report_key(dev, BTN_TOUCH, 1);
705 else
706 input_report_key(dev, BTN_TOUCH, 0);
707
708 alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
709
710 input_mt_report_finger_count(dev, fingers);
711
712 input_report_key(dev, BTN_LEFT, f.left);
713 input_report_key(dev, BTN_RIGHT, f.right);
714 input_report_key(dev, BTN_MIDDLE, f.middle);
715
716 if (f.z > 0) {
717 input_report_abs(dev, ABS_X, f.x);
718 input_report_abs(dev, ABS_Y, f.y);
719 }
720 input_report_abs(dev, ABS_PRESSURE, f.z);
721
722 input_sync(dev);
723
724 if (!(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS)) {
725 input_report_key(dev2, BTN_LEFT, f.ts_left);
726 input_report_key(dev2, BTN_RIGHT, f.ts_right);
727 input_report_key(dev2, BTN_MIDDLE, f.ts_middle);
728 input_sync(dev2);
729 }
730}
731
732static void alps_process_packet_v3(struct psmouse *psmouse)
733{
734 unsigned char *packet = psmouse->packet;
735
736 /*
737 * v3 protocol packets come in three types, two representing
738 * touchpad data and one representing trackstick data.
739 * Trackstick packets seem to be distinguished by always
740 * having 0x3f in the last byte. This value has never been
741 * observed in the last byte of either of the other types
742 * of packets.
743 */
744 if (packet[5] == 0x3f) {
745 alps_process_trackstick_packet_v3(psmouse);
746 return;
747 }
748
749 alps_process_touchpad_packet_v3_v5(psmouse);
750}
751
752static void alps_process_packet_v6(struct psmouse *psmouse)
753{
754 struct alps_data *priv = psmouse->private;
755 unsigned char *packet = psmouse->packet;
756 struct input_dev *dev = psmouse->dev;
757 struct input_dev *dev2 = priv->dev2;
758 int x, y, z, left, right, middle;
759
760 /*
761 * We can use Byte5 to distinguish if the packet is from Touchpad
762 * or Trackpoint.
763 * Touchpad: 0 - 0x7E
764 * Trackpoint: 0x7F
765 */
766 if (packet[5] == 0x7F) {
767 /* It should be a DualPoint when received Trackpoint packet */
768 if (!(priv->flags & ALPS_DUALPOINT))
769 return;
770
771 /* Trackpoint packet */
772 x = packet[1] | ((packet[3] & 0x20) << 2);
773 y = packet[2] | ((packet[3] & 0x40) << 1);
774 z = packet[4];
775 left = packet[3] & 0x01;
776 right = packet[3] & 0x02;
777 middle = packet[3] & 0x04;
778
779 /* To prevent the cursor jump when finger lifted */
780 if (x == 0x7F && y == 0x7F && z == 0x7F)
781 x = y = z = 0;
782
783 /* Divide 4 since trackpoint's speed is too fast */
784 input_report_rel(dev2, REL_X, (char)x / 4);
785 input_report_rel(dev2, REL_Y, -((char)y / 4));
786
787 input_report_key(dev2, BTN_LEFT, left);
788 input_report_key(dev2, BTN_RIGHT, right);
789 input_report_key(dev2, BTN_MIDDLE, middle);
790
791 input_sync(dev2);
792 return;
793 }
794
795 /* Touchpad packet */
796 x = packet[1] | ((packet[3] & 0x78) << 4);
797 y = packet[2] | ((packet[4] & 0x78) << 4);
798 z = packet[5];
799 left = packet[3] & 0x01;
800 right = packet[3] & 0x02;
801
802 if (z > 30)
803 input_report_key(dev, BTN_TOUCH, 1);
804 if (z < 25)
805 input_report_key(dev, BTN_TOUCH, 0);
806
807 if (z > 0) {
808 input_report_abs(dev, ABS_X, x);
809 input_report_abs(dev, ABS_Y, y);
810 }
811
812 input_report_abs(dev, ABS_PRESSURE, z);
813 input_report_key(dev, BTN_TOOL_FINGER, z > 0);
814
815 /* v6 touchpad does not have middle button */
816 input_report_key(dev, BTN_LEFT, left);
817 input_report_key(dev, BTN_RIGHT, right);
818
819 input_sync(dev);
820}
821
822static void alps_process_packet_v4(struct psmouse *psmouse)
823{
824 struct alps_data *priv = psmouse->private;
825 unsigned char *packet = psmouse->packet;
826 struct input_dev *dev = psmouse->dev;
827 int offset;
828 int x, y, z;
829 int left, right;
830 int x1, y1, x2, y2;
831 int fingers = 0;
832 unsigned int x_bitmap, y_bitmap;
833
834 /*
835 * v4 has a 6-byte encoding for bitmap data, but this data is
836 * broken up between 3 normal packets. Use priv->multi_packet to
837 * track our position in the bitmap packet.
838 */
839 if (packet[6] & 0x40) {
840 /* sync, reset position */
841 priv->multi_packet = 0;
842 }
843
844 if (WARN_ON_ONCE(priv->multi_packet > 2))
845 return;
846
847 offset = 2 * priv->multi_packet;
848 priv->multi_data[offset] = packet[6];
849 priv->multi_data[offset + 1] = packet[7];
850
851 if (++priv->multi_packet > 2) {
852 priv->multi_packet = 0;
853
854 x_bitmap = ((priv->multi_data[2] & 0x1f) << 10) |
855 ((priv->multi_data[3] & 0x60) << 3) |
856 ((priv->multi_data[0] & 0x3f) << 2) |
857 ((priv->multi_data[1] & 0x60) >> 5);
858 y_bitmap = ((priv->multi_data[5] & 0x01) << 10) |
859 ((priv->multi_data[3] & 0x1f) << 5) |
860 (priv->multi_data[1] & 0x1f);
861
862 fingers = alps_process_bitmap(priv, x_bitmap, y_bitmap,
863 &x1, &y1, &x2, &y2);
864
865 /* Store MT data.*/
866 priv->fingers = fingers;
867 priv->x1 = x1;
868 priv->x2 = x2;
869 priv->y1 = y1;
870 priv->y2 = y2;
871 }
872
873 left = packet[4] & 0x01;
874 right = packet[4] & 0x02;
875
876 x = ((packet[1] & 0x7f) << 4) | ((packet[3] & 0x30) >> 2) |
877 ((packet[0] & 0x30) >> 4);
878 y = ((packet[2] & 0x7f) << 4) | (packet[3] & 0x0f);
879 z = packet[5] & 0x7f;
880
881 /*
882 * If there were no contacts in the bitmap, use ST
883 * points in MT reports.
884 * If there were two contacts or more, report MT data.
885 */
886 if (priv->fingers < 2) {
887 x1 = x;
888 y1 = y;
889 fingers = z > 0 ? 1 : 0;
890 } else {
891 fingers = priv->fingers;
892 x1 = priv->x1;
893 x2 = priv->x2;
894 y1 = priv->y1;
895 y2 = priv->y2;
896 }
897
898 if (z >= 64)
899 input_report_key(dev, BTN_TOUCH, 1);
900 else
901 input_report_key(dev, BTN_TOUCH, 0);
902
903 alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
904
905 input_mt_report_finger_count(dev, fingers);
906
907 input_report_key(dev, BTN_LEFT, left);
908 input_report_key(dev, BTN_RIGHT, right);
909
910 if (z > 0) {
911 input_report_abs(dev, ABS_X, x);
912 input_report_abs(dev, ABS_Y, y);
913 }
914 input_report_abs(dev, ABS_PRESSURE, z);
915
916 input_sync(dev);
917}
918
919static void alps_report_bare_ps2_packet(struct psmouse *psmouse,
920 unsigned char packet[],
921 bool report_buttons)
922{
923 struct alps_data *priv = psmouse->private;
924 struct input_dev *dev2 = priv->dev2;
925
926 if (report_buttons)
927 alps_report_buttons(psmouse, dev2, psmouse->dev,
928 packet[0] & 1, packet[0] & 2, packet[0] & 4);
929
930 input_report_rel(dev2, REL_X,
931 packet[1] ? packet[1] - ((packet[0] << 4) & 0x100) : 0);
932 input_report_rel(dev2, REL_Y,
933 packet[2] ? ((packet[0] << 3) & 0x100) - packet[2] : 0);
934
935 input_sync(dev2);
936}
937
938static psmouse_ret_t alps_handle_interleaved_ps2(struct psmouse *psmouse)
939{
940 struct alps_data *priv = psmouse->private;
941
942 if (psmouse->pktcnt < 6)
943 return PSMOUSE_GOOD_DATA;
944
945 if (psmouse->pktcnt == 6) {
946 /*
947 * Start a timer to flush the packet if it ends up last
948 * 6-byte packet in the stream. Timer needs to fire
949 * psmouse core times out itself. 20 ms should be enough
950 * to decide if we are getting more data or not.
951 */
952 mod_timer(&priv->timer, jiffies + msecs_to_jiffies(20));
953 return PSMOUSE_GOOD_DATA;
954 }
955
956 del_timer(&priv->timer);
957
958 if (psmouse->packet[6] & 0x80) {
959
960 /*
961 * Highest bit is set - that means we either had
962 * complete ALPS packet and this is start of the
963 * next packet or we got garbage.
964 */
965
966 if (((psmouse->packet[3] |
967 psmouse->packet[4] |
968 psmouse->packet[5]) & 0x80) ||
969 (!alps_is_valid_first_byte(priv, psmouse->packet[6]))) {
970 psmouse_dbg(psmouse,
971 "refusing packet %4ph (suspected interleaved ps/2)\n",
972 psmouse->packet + 3);
973 return PSMOUSE_BAD_DATA;
974 }
975
976 priv->process_packet(psmouse);
977
978 /* Continue with the next packet */
979 psmouse->packet[0] = psmouse->packet[6];
980 psmouse->pktcnt = 1;
981
982 } else {
983
984 /*
985 * High bit is 0 - that means that we indeed got a PS/2
986 * packet in the middle of ALPS packet.
987 *
988 * There is also possibility that we got 6-byte ALPS
989 * packet followed by 3-byte packet from trackpoint. We
990 * can not distinguish between these 2 scenarios but
991 * because the latter is unlikely to happen in course of
992 * normal operation (user would need to press all
993 * buttons on the pad and start moving trackpoint
994 * without touching the pad surface) we assume former.
995 * Even if we are wrong the wost thing that would happen
996 * the cursor would jump but we should not get protocol
997 * de-synchronization.
998 */
999
1000 alps_report_bare_ps2_packet(psmouse, &psmouse->packet[3],
1001 false);
1002
1003 /*
1004 * Continue with the standard ALPS protocol handling,
1005 * but make sure we won't process it as an interleaved
1006 * packet again, which may happen if all buttons are
1007 * pressed. To avoid this let's reset the 4th bit which
1008 * is normally 1.
1009 */
1010 psmouse->packet[3] = psmouse->packet[6] & 0xf7;
1011 psmouse->pktcnt = 4;
1012 }
1013
1014 return PSMOUSE_GOOD_DATA;
1015}
1016
1017static void alps_flush_packet(unsigned long data)
1018{
1019 struct psmouse *psmouse = (struct psmouse *)data;
1020 struct alps_data *priv = psmouse->private;
1021
1022 serio_pause_rx(psmouse->ps2dev.serio);
1023
1024 if (psmouse->pktcnt == psmouse->pktsize) {
1025
1026 /*
1027 * We did not any more data in reasonable amount of time.
1028 * Validate the last 3 bytes and process as a standard
1029 * ALPS packet.
1030 */
1031 if ((psmouse->packet[3] |
1032 psmouse->packet[4] |
1033 psmouse->packet[5]) & 0x80) {
1034 psmouse_dbg(psmouse,
1035 "refusing packet %3ph (suspected interleaved ps/2)\n",
1036 psmouse->packet + 3);
1037 } else {
1038 priv->process_packet(psmouse);
1039 }
1040 psmouse->pktcnt = 0;
1041 }
1042
1043 serio_continue_rx(psmouse->ps2dev.serio);
1044}
1045
1046static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
1047{
1048 struct alps_data *priv = psmouse->private;
1049
1050 if ((psmouse->packet[0] & 0xc8) == 0x08) { /* PS/2 packet */
1051 if (psmouse->pktcnt == 3) {
1052 alps_report_bare_ps2_packet(psmouse, psmouse->packet,
1053 true);
1054 return PSMOUSE_FULL_PACKET;
1055 }
1056 return PSMOUSE_GOOD_DATA;
1057 }
1058
1059 /* Check for PS/2 packet stuffed in the middle of ALPS packet. */
1060
1061 if ((priv->flags & ALPS_PS2_INTERLEAVED) &&
1062 psmouse->pktcnt >= 4 && (psmouse->packet[3] & 0x0f) == 0x0f) {
1063 return alps_handle_interleaved_ps2(psmouse);
1064 }
1065
1066 if (!alps_is_valid_first_byte(priv, psmouse->packet[0])) {
1067 psmouse_dbg(psmouse,
1068 "refusing packet[0] = %x (mask0 = %x, byte0 = %x)\n",
1069 psmouse->packet[0], priv->mask0, priv->byte0);
1070 return PSMOUSE_BAD_DATA;
1071 }
1072
1073 /* Bytes 2 - pktsize should have 0 in the highest bit */
1074 if ((priv->proto_version < ALPS_PROTO_V5) &&
1075 psmouse->pktcnt >= 2 && psmouse->pktcnt <= psmouse->pktsize &&
1076 (psmouse->packet[psmouse->pktcnt - 1] & 0x80)) {
1077 psmouse_dbg(psmouse, "refusing packet[%i] = %x\n",
1078 psmouse->pktcnt - 1,
1079 psmouse->packet[psmouse->pktcnt - 1]);
1080 return PSMOUSE_BAD_DATA;
1081 }
1082
1083 if (psmouse->pktcnt == psmouse->pktsize) {
1084 priv->process_packet(psmouse);
1085 return PSMOUSE_FULL_PACKET;
1086 }
1087
1088 return PSMOUSE_GOOD_DATA;
1089}
1090
1091static int alps_command_mode_send_nibble(struct psmouse *psmouse, int nibble)
1092{
1093 struct ps2dev *ps2dev = &psmouse->ps2dev;
1094 struct alps_data *priv = psmouse->private;
1095 int command;
1096 unsigned char *param;
1097 unsigned char dummy[4];
1098
1099 BUG_ON(nibble > 0xf);
1100
1101 command = priv->nibble_commands[nibble].command;
1102 param = (command & 0x0f00) ?
1103 dummy : (unsigned char *)&priv->nibble_commands[nibble].data;
1104
1105 if (ps2_command(ps2dev, param, command))
1106 return -1;
1107
1108 return 0;
1109}
1110
1111static int alps_command_mode_set_addr(struct psmouse *psmouse, int addr)
1112{
1113 struct ps2dev *ps2dev = &psmouse->ps2dev;
1114 struct alps_data *priv = psmouse->private;
1115 int i, nibble;
1116
1117 if (ps2_command(ps2dev, NULL, priv->addr_command))
1118 return -1;
1119
1120 for (i = 12; i >= 0; i -= 4) {
1121 nibble = (addr >> i) & 0xf;
1122 if (alps_command_mode_send_nibble(psmouse, nibble))
1123 return -1;
1124 }
1125
1126 return 0;
1127}
1128
1129static int __alps_command_mode_read_reg(struct psmouse *psmouse, int addr)
1130{
1131 struct ps2dev *ps2dev = &psmouse->ps2dev;
1132 unsigned char param[4];
1133
1134 if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
1135 return -1;
1136
1137 /*
1138 * The address being read is returned in the first two bytes
1139 * of the result. Check that this address matches the expected
1140 * address.
1141 */
1142 if (addr != ((param[0] << 8) | param[1]))
1143 return -1;
1144
1145 return param[2];
1146}
1147
1148static int alps_command_mode_read_reg(struct psmouse *psmouse, int addr)
1149{
1150 if (alps_command_mode_set_addr(psmouse, addr))
1151 return -1;
1152 return __alps_command_mode_read_reg(psmouse, addr);
1153}
1154
1155static int __alps_command_mode_write_reg(struct psmouse *psmouse, u8 value)
1156{
1157 if (alps_command_mode_send_nibble(psmouse, (value >> 4) & 0xf))
1158 return -1;
1159 if (alps_command_mode_send_nibble(psmouse, value & 0xf))
1160 return -1;
1161 return 0;
1162}
1163
1164static int alps_command_mode_write_reg(struct psmouse *psmouse, int addr,
1165 u8 value)
1166{
1167 if (alps_command_mode_set_addr(psmouse, addr))
1168 return -1;
1169 return __alps_command_mode_write_reg(psmouse, value);
1170}
1171
1172static int alps_rpt_cmd(struct psmouse *psmouse, int init_command,
1173 int repeated_command, unsigned char *param)
1174{
1175 struct ps2dev *ps2dev = &psmouse->ps2dev;
1176
1177 param[0] = 0;
1178 if (init_command && ps2_command(ps2dev, param, init_command))
1179 return -EIO;
1180
1181 if (ps2_command(ps2dev, NULL, repeated_command) ||
1182 ps2_command(ps2dev, NULL, repeated_command) ||
1183 ps2_command(ps2dev, NULL, repeated_command))
1184 return -EIO;
1185
1186 param[0] = param[1] = param[2] = 0xff;
1187 if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
1188 return -EIO;
1189
1190 psmouse_dbg(psmouse, "%2.2X report: %3ph\n",
1191 repeated_command, param);
1192 return 0;
1193}
1194
1195static int alps_enter_command_mode(struct psmouse *psmouse)
1196{
1197 unsigned char param[4];
1198
1199 if (alps_rpt_cmd(psmouse, 0, PSMOUSE_CMD_RESET_WRAP, param)) {
1200 psmouse_err(psmouse, "failed to enter command mode\n");
1201 return -1;
1202 }
1203
1204 if ((param[0] != 0x88 || (param[1] != 0x07 && param[1] != 0x08)) &&
1205 param[0] != 0x73) {
1206 psmouse_dbg(psmouse,
1207 "unknown response while entering command mode\n");
1208 return -1;
1209 }
1210 return 0;
1211}
1212
1213static inline int alps_exit_command_mode(struct psmouse *psmouse)
1214{
1215 struct ps2dev *ps2dev = &psmouse->ps2dev;
1216 if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM))
1217 return -1;
1218 return 0;
1219}
1220
1221/*
1222 * For DualPoint devices select the device that should respond to
1223 * subsequent commands. It looks like glidepad is behind stickpointer,
1224 * I'd thought it would be other way around...
1225 */
1226static int alps_passthrough_mode_v2(struct psmouse *psmouse, bool enable)
1227{
1228 struct ps2dev *ps2dev = &psmouse->ps2dev;
1229 int cmd = enable ? PSMOUSE_CMD_SETSCALE21 : PSMOUSE_CMD_SETSCALE11;
1230
1231 if (ps2_command(ps2dev, NULL, cmd) ||
1232 ps2_command(ps2dev, NULL, cmd) ||
1233 ps2_command(ps2dev, NULL, cmd) ||
1234 ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE))
1235 return -1;
1236
1237 /* we may get 3 more bytes, just ignore them */
1238 ps2_drain(ps2dev, 3, 100);
1239
1240 return 0;
1241}
1242
1243static int alps_absolute_mode_v1_v2(struct psmouse *psmouse)
1244{
1245 struct ps2dev *ps2dev = &psmouse->ps2dev;
1246
1247 /* Try ALPS magic knock - 4 disable before enable */
1248 if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
1249 ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
1250 ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
1251 ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
1252 ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE))
1253 return -1;
1254
1255 /*
1256 * Switch mouse to poll (remote) mode so motion data will not
1257 * get in our way
1258 */
1259 return ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETPOLL);
1260}
1261
1262static int alps_monitor_mode_send_word(struct psmouse *psmouse, u16 word)
1263{
1264 int i, nibble;
1265
1266 /*
1267 * b0-b11 are valid bits, send sequence is inverse.
1268 * e.g. when word = 0x0123, nibble send sequence is 3, 2, 1
1269 */
1270 for (i = 0; i <= 8; i += 4) {
1271 nibble = (word >> i) & 0xf;
1272 if (alps_command_mode_send_nibble(psmouse, nibble))
1273 return -1;
1274 }
1275
1276 return 0;
1277}
1278
1279static int alps_monitor_mode_write_reg(struct psmouse *psmouse,
1280 u16 addr, u16 value)
1281{
1282 struct ps2dev *ps2dev = &psmouse->ps2dev;
1283
1284 /* 0x0A0 is the command to write the word */
1285 if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE) ||
1286 alps_monitor_mode_send_word(psmouse, 0x0A0) ||
1287 alps_monitor_mode_send_word(psmouse, addr) ||
1288 alps_monitor_mode_send_word(psmouse, value) ||
1289 ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE))
1290 return -1;
1291
1292 return 0;
1293}
1294
1295static int alps_monitor_mode(struct psmouse *psmouse, bool enable)
1296{
1297 struct ps2dev *ps2dev = &psmouse->ps2dev;
1298
1299 if (enable) {
1300 /* EC E9 F5 F5 E7 E6 E7 E9 to enter monitor mode */
1301 if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) ||
1302 ps2_command(ps2dev, NULL, PSMOUSE_CMD_GETINFO) ||
1303 ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
1304 ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
1305 ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
1306 ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
1307 ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
1308 ps2_command(ps2dev, NULL, PSMOUSE_CMD_GETINFO))
1309 return -1;
1310 } else {
1311 /* EC to exit monitor mode */
1312 if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP))
1313 return -1;
1314 }
1315
1316 return 0;
1317}
1318
1319static int alps_absolute_mode_v6(struct psmouse *psmouse)
1320{
1321 u16 reg_val = 0x181;
1322 int ret = -1;
1323
1324 /* enter monitor mode, to write the register */
1325 if (alps_monitor_mode(psmouse, true))
1326 return -1;
1327
1328 ret = alps_monitor_mode_write_reg(psmouse, 0x000, reg_val);
1329
1330 if (alps_monitor_mode(psmouse, false))
1331 ret = -1;
1332
1333 return ret;
1334}
1335
1336static int alps_get_status(struct psmouse *psmouse, char *param)
1337{
1338 /* Get status: 0xF5 0xF5 0xF5 0xE9 */
1339 if (alps_rpt_cmd(psmouse, 0, PSMOUSE_CMD_DISABLE, param))
1340 return -1;
1341
1342 return 0;
1343}
1344
1345/*
1346 * Turn touchpad tapping on or off. The sequences are:
1347 * 0xE9 0xF5 0xF5 0xF3 0x0A to enable,
1348 * 0xE9 0xF5 0xF5 0xE8 0x00 to disable.
1349 * My guess that 0xE9 (GetInfo) is here as a sync point.
1350 * For models that also have stickpointer (DualPoints) its tapping
1351 * is controlled separately (0xE6 0xE6 0xE6 0xF3 0x14|0x0A) but
1352 * we don't fiddle with it.
1353 */
1354static int alps_tap_mode(struct psmouse *psmouse, int enable)
1355{
1356 struct ps2dev *ps2dev = &psmouse->ps2dev;
1357 int cmd = enable ? PSMOUSE_CMD_SETRATE : PSMOUSE_CMD_SETRES;
1358 unsigned char tap_arg = enable ? 0x0A : 0x00;
1359 unsigned char param[4];
1360
1361 if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO) ||
1362 ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
1363 ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
1364 ps2_command(ps2dev, &tap_arg, cmd))
1365 return -1;
1366
1367 if (alps_get_status(psmouse, param))
1368 return -1;
1369
1370 return 0;
1371}
1372
1373/*
1374 * alps_poll() - poll the touchpad for current motion packet.
1375 * Used in resync.
1376 */
1377static int alps_poll(struct psmouse *psmouse)
1378{
1379 struct alps_data *priv = psmouse->private;
1380 unsigned char buf[sizeof(psmouse->packet)];
1381 bool poll_failed;
1382
1383 if (priv->flags & ALPS_PASS)
1384 alps_passthrough_mode_v2(psmouse, true);
1385
1386 poll_failed = ps2_command(&psmouse->ps2dev, buf,
1387 PSMOUSE_CMD_POLL | (psmouse->pktsize << 8)) < 0;
1388
1389 if (priv->flags & ALPS_PASS)
1390 alps_passthrough_mode_v2(psmouse, false);
1391
1392 if (poll_failed || (buf[0] & priv->mask0) != priv->byte0)
1393 return -1;
1394
1395 if ((psmouse->badbyte & 0xc8) == 0x08) {
1396/*
1397 * Poll the track stick ...
1398 */
1399 if (ps2_command(&psmouse->ps2dev, buf, PSMOUSE_CMD_POLL | (3 << 8)))
1400 return -1;
1401 }
1402
1403 memcpy(psmouse->packet, buf, sizeof(buf));
1404 return 0;
1405}
1406
1407static int alps_hw_init_v1_v2(struct psmouse *psmouse)
1408{
1409 struct alps_data *priv = psmouse->private;
1410
1411 if ((priv->flags & ALPS_PASS) &&
1412 alps_passthrough_mode_v2(psmouse, true)) {
1413 return -1;
1414 }
1415
1416 if (alps_tap_mode(psmouse, true)) {
1417 psmouse_warn(psmouse, "Failed to enable hardware tapping\n");
1418 return -1;
1419 }
1420
1421 if (alps_absolute_mode_v1_v2(psmouse)) {
1422 psmouse_err(psmouse, "Failed to enable absolute mode\n");
1423 return -1;
1424 }
1425
1426 if ((priv->flags & ALPS_PASS) &&
1427 alps_passthrough_mode_v2(psmouse, false)) {
1428 return -1;
1429 }
1430
1431 /* ALPS needs stream mode, otherwise it won't report any data */
1432 if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSTREAM)) {
1433 psmouse_err(psmouse, "Failed to enable stream mode\n");
1434 return -1;
1435 }
1436
1437 return 0;
1438}
1439
1440static int alps_hw_init_v6(struct psmouse *psmouse)
1441{
1442 unsigned char param[2] = {0xC8, 0x14};
1443
1444 /* Enter passthrough mode to let trackpoint enter 6byte raw mode */
1445 if (alps_passthrough_mode_v2(psmouse, true))
1446 return -1;
1447
1448 if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
1449 ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
1450 ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
1451 ps2_command(&psmouse->ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE) ||
1452 ps2_command(&psmouse->ps2dev, ¶m[1], PSMOUSE_CMD_SETRATE))
1453 return -1;
1454
1455 if (alps_passthrough_mode_v2(psmouse, false))
1456 return -1;
1457
1458 if (alps_absolute_mode_v6(psmouse)) {
1459 psmouse_err(psmouse, "Failed to enable absolute mode\n");
1460 return -1;
1461 }
1462
1463 return 0;
1464}
1465
1466/*
1467 * Enable or disable passthrough mode to the trackstick.
1468 */
1469static int alps_passthrough_mode_v3(struct psmouse *psmouse,
1470 int reg_base, bool enable)
1471{
1472 int reg_val, ret = -1;
1473
1474 if (alps_enter_command_mode(psmouse))
1475 return -1;
1476
1477 reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x0008);
1478 if (reg_val == -1)
1479 goto error;
1480
1481 if (enable)
1482 reg_val |= 0x01;
1483 else
1484 reg_val &= ~0x01;
1485
1486 ret = __alps_command_mode_write_reg(psmouse, reg_val);
1487
1488error:
1489 if (alps_exit_command_mode(psmouse))
1490 ret = -1;
1491 return ret;
1492}
1493
1494/* Must be in command mode when calling this function */
1495static int alps_absolute_mode_v3(struct psmouse *psmouse)
1496{
1497 int reg_val;
1498
1499 reg_val = alps_command_mode_read_reg(psmouse, 0x0004);
1500 if (reg_val == -1)
1501 return -1;
1502
1503 reg_val |= 0x06;
1504 if (__alps_command_mode_write_reg(psmouse, reg_val))
1505 return -1;
1506
1507 return 0;
1508}
1509
1510static int alps_probe_trackstick_v3(struct psmouse *psmouse, int reg_base)
1511{
1512 int ret = -EIO, reg_val;
1513
1514 if (alps_enter_command_mode(psmouse))
1515 goto error;
1516
1517 reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x08);
1518 if (reg_val == -1)
1519 goto error;
1520
1521 /* bit 7: trackstick is present */
1522 ret = reg_val & 0x80 ? 0 : -ENODEV;
1523
1524error:
1525 alps_exit_command_mode(psmouse);
1526 return ret;
1527}
1528
1529static int alps_setup_trackstick_v3(struct psmouse *psmouse, int reg_base)
1530{
1531 struct ps2dev *ps2dev = &psmouse->ps2dev;
1532 int ret = 0;
1533 unsigned char param[4];
1534
1535 if (alps_passthrough_mode_v3(psmouse, reg_base, true))
1536 return -EIO;
1537
1538 /*
1539 * E7 report for the trackstick
1540 *
1541 * There have been reports of failures to seem to trace back
1542 * to the above trackstick check failing. When these occur
1543 * this E7 report fails, so when that happens we continue
1544 * with the assumption that there isn't a trackstick after
1545 * all.
1546 */
1547 if (alps_rpt_cmd(psmouse, 0, PSMOUSE_CMD_SETSCALE21, param)) {
1548 psmouse_warn(psmouse, "trackstick E7 report failed\n");
1549 ret = -ENODEV;
1550 } else {
1551 psmouse_dbg(psmouse, "trackstick E7 report: %3ph\n", param);
1552
1553 /*
1554 * Not sure what this does, but it is absolutely
1555 * essential. Without it, the touchpad does not
1556 * work at all and the trackstick just emits normal
1557 * PS/2 packets.
1558 */
1559 if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
1560 ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
1561 ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
1562 alps_command_mode_send_nibble(psmouse, 0x9) ||
1563 alps_command_mode_send_nibble(psmouse, 0x4)) {
1564 psmouse_err(psmouse,
1565 "Error sending magic E6 sequence\n");
1566 ret = -EIO;
1567 goto error;
1568 }
1569
1570 /*
1571 * This ensures the trackstick packets are in the format
1572 * supported by this driver. If bit 1 isn't set the packet
1573 * format is different.
1574 */
1575 if (alps_enter_command_mode(psmouse) ||
1576 alps_command_mode_write_reg(psmouse,
1577 reg_base + 0x08, 0x82) ||
1578 alps_exit_command_mode(psmouse))
1579 ret = -EIO;
1580 }
1581
1582error:
1583 if (alps_passthrough_mode_v3(psmouse, reg_base, false))
1584 ret = -EIO;
1585
1586 return ret;
1587}
1588
1589static int alps_hw_init_v3(struct psmouse *psmouse)
1590{
1591 struct ps2dev *ps2dev = &psmouse->ps2dev;
1592 int reg_val;
1593 unsigned char param[4];
1594
1595 reg_val = alps_probe_trackstick_v3(psmouse, ALPS_REG_BASE_PINNACLE);
1596 if (reg_val == -EIO)
1597 goto error;
1598
1599 if (reg_val == 0 &&
1600 alps_setup_trackstick_v3(psmouse, ALPS_REG_BASE_PINNACLE) == -EIO)
1601 goto error;
1602
1603 if (alps_enter_command_mode(psmouse) ||
1604 alps_absolute_mode_v3(psmouse)) {
1605 psmouse_err(psmouse, "Failed to enter absolute mode\n");
1606 goto error;
1607 }
1608
1609 reg_val = alps_command_mode_read_reg(psmouse, 0x0006);
1610 if (reg_val == -1)
1611 goto error;
1612 if (__alps_command_mode_write_reg(psmouse, reg_val | 0x01))
1613 goto error;
1614
1615 reg_val = alps_command_mode_read_reg(psmouse, 0x0007);
1616 if (reg_val == -1)
1617 goto error;
1618 if (__alps_command_mode_write_reg(psmouse, reg_val | 0x01))
1619 goto error;
1620
1621 if (alps_command_mode_read_reg(psmouse, 0x0144) == -1)
1622 goto error;
1623 if (__alps_command_mode_write_reg(psmouse, 0x04))
1624 goto error;
1625
1626 if (alps_command_mode_read_reg(psmouse, 0x0159) == -1)
1627 goto error;
1628 if (__alps_command_mode_write_reg(psmouse, 0x03))
1629 goto error;
1630
1631 if (alps_command_mode_read_reg(psmouse, 0x0163) == -1)
1632 goto error;
1633 if (alps_command_mode_write_reg(psmouse, 0x0163, 0x03))
1634 goto error;
1635
1636 if (alps_command_mode_read_reg(psmouse, 0x0162) == -1)
1637 goto error;
1638 if (alps_command_mode_write_reg(psmouse, 0x0162, 0x04))
1639 goto error;
1640
1641 alps_exit_command_mode(psmouse);
1642
1643 /* Set rate and enable data reporting */
1644 param[0] = 0x64;
1645 if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE) ||
1646 ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)) {
1647 psmouse_err(psmouse, "Failed to enable data reporting\n");
1648 return -1;
1649 }
1650
1651 return 0;
1652
1653error:
1654 /*
1655 * Leaving the touchpad in command mode will essentially render
1656 * it unusable until the machine reboots, so exit it here just
1657 * to be safe
1658 */
1659 alps_exit_command_mode(psmouse);
1660 return -1;
1661}
1662
1663static int alps_hw_init_rushmore_v3(struct psmouse *psmouse)
1664{
1665 struct alps_data *priv = psmouse->private;
1666 struct ps2dev *ps2dev = &psmouse->ps2dev;
1667 int reg_val, ret = -1;
1668
1669 if (priv->flags & ALPS_DUALPOINT) {
1670 reg_val = alps_setup_trackstick_v3(psmouse,
1671 ALPS_REG_BASE_RUSHMORE);
1672 if (reg_val == -EIO)
1673 goto error;
1674 if (reg_val == -ENODEV)
1675 priv->flags &= ~ALPS_DUALPOINT;
1676 }
1677
1678 if (alps_enter_command_mode(psmouse) ||
1679 alps_command_mode_read_reg(psmouse, 0xc2d9) == -1 ||
1680 alps_command_mode_write_reg(psmouse, 0xc2cb, 0x00))
1681 goto error;
1682
1683 reg_val = alps_command_mode_read_reg(psmouse, 0xc2c6);
1684 if (reg_val == -1)
1685 goto error;
1686 if (__alps_command_mode_write_reg(psmouse, reg_val & 0xfd))
1687 goto error;
1688
1689 if (alps_command_mode_write_reg(psmouse, 0xc2c9, 0x64))
1690 goto error;
1691
1692 /* enter absolute mode */
1693 reg_val = alps_command_mode_read_reg(psmouse, 0xc2c4);
1694 if (reg_val == -1)
1695 goto error;
1696 if (__alps_command_mode_write_reg(psmouse, reg_val | 0x02))
1697 goto error;
1698
1699 alps_exit_command_mode(psmouse);
1700 return ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE);
1701
1702error:
1703 alps_exit_command_mode(psmouse);
1704 return ret;
1705}
1706
1707/* Must be in command mode when calling this function */
1708static int alps_absolute_mode_v4(struct psmouse *psmouse)
1709{
1710 int reg_val;
1711
1712 reg_val = alps_command_mode_read_reg(psmouse, 0x0004);
1713 if (reg_val == -1)
1714 return -1;
1715
1716 reg_val |= 0x02;
1717 if (__alps_command_mode_write_reg(psmouse, reg_val))
1718 return -1;
1719
1720 return 0;
1721}
1722
1723static int alps_hw_init_v4(struct psmouse *psmouse)
1724{
1725 struct ps2dev *ps2dev = &psmouse->ps2dev;
1726 unsigned char param[4];
1727
1728 if (alps_enter_command_mode(psmouse))
1729 goto error;
1730
1731 if (alps_absolute_mode_v4(psmouse)) {
1732 psmouse_err(psmouse, "Failed to enter absolute mode\n");
1733 goto error;
1734 }
1735
1736 if (alps_command_mode_write_reg(psmouse, 0x0007, 0x8c))
1737 goto error;
1738
1739 if (alps_command_mode_write_reg(psmouse, 0x0149, 0x03))
1740 goto error;
1741
1742 if (alps_command_mode_write_reg(psmouse, 0x0160, 0x03))
1743 goto error;
1744
1745 if (alps_command_mode_write_reg(psmouse, 0x017f, 0x15))
1746 goto error;
1747
1748 if (alps_command_mode_write_reg(psmouse, 0x0151, 0x01))
1749 goto error;
1750
1751 if (alps_command_mode_write_reg(psmouse, 0x0168, 0x03))
1752 goto error;
1753
1754 if (alps_command_mode_write_reg(psmouse, 0x014a, 0x03))
1755 goto error;
1756
1757 if (alps_command_mode_write_reg(psmouse, 0x0161, 0x03))
1758 goto error;
1759
1760 alps_exit_command_mode(psmouse);
1761
1762 /*
1763 * This sequence changes the output from a 9-byte to an
1764 * 8-byte format. All the same data seems to be present,
1765 * just in a more compact format.
1766 */
1767 param[0] = 0xc8;
1768 param[1] = 0x64;
1769 param[2] = 0x50;
1770 if (ps2_command(ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE) ||
1771 ps2_command(ps2dev, ¶m[1], PSMOUSE_CMD_SETRATE) ||
1772 ps2_command(ps2dev, ¶m[2], PSMOUSE_CMD_SETRATE) ||
1773 ps2_command(ps2dev, param, PSMOUSE_CMD_GETID))
1774 return -1;
1775
1776 /* Set rate and enable data reporting */
1777 param[0] = 0x64;
1778 if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE) ||
1779 ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)) {
1780 psmouse_err(psmouse, "Failed to enable data reporting\n");
1781 return -1;
1782 }
1783
1784 return 0;
1785
1786error:
1787 /*
1788 * Leaving the touchpad in command mode will essentially render
1789 * it unusable until the machine reboots, so exit it here just
1790 * to be safe
1791 */
1792 alps_exit_command_mode(psmouse);
1793 return -1;
1794}
1795
1796static int alps_dolphin_get_device_area(struct psmouse *psmouse,
1797 struct alps_data *priv)
1798{
1799 struct ps2dev *ps2dev = &psmouse->ps2dev;
1800 unsigned char param[4] = {0};
1801 int num_x_electrode, num_y_electrode;
1802
1803 if (alps_enter_command_mode(psmouse))
1804 return -1;
1805
1806 param[0] = 0x0a;
1807 if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) ||
1808 ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL) ||
1809 ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL) ||
1810 ps2_command(ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE) ||
1811 ps2_command(ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE))
1812 return -1;
1813
1814 if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
1815 return -1;
1816
1817 /*
1818 * Dolphin's sensor line number is not fixed. It can be calculated
1819 * by adding the device's register value with DOLPHIN_PROFILE_X/YOFFSET.
1820 * Further more, we can get device's x_max and y_max by multiplying
1821 * sensor line number with DOLPHIN_COUNT_PER_ELECTRODE.
1822 *
1823 * e.g. When we get register's sensor_x = 11 & sensor_y = 8,
1824 * real sensor line number X = 11 + 8 = 19, and
1825 * real sensor line number Y = 8 + 1 = 9.
1826 * So, x_max = (19 - 1) * 64 = 1152, and
1827 * y_max = (9 - 1) * 64 = 512.
1828 */
1829 num_x_electrode = DOLPHIN_PROFILE_XOFFSET + (param[2] & 0x0F);
1830 num_y_electrode = DOLPHIN_PROFILE_YOFFSET + ((param[2] >> 4) & 0x0F);
1831 priv->x_bits = num_x_electrode;
1832 priv->y_bits = num_y_electrode;
1833 priv->x_max = (num_x_electrode - 1) * DOLPHIN_COUNT_PER_ELECTRODE;
1834 priv->y_max = (num_y_electrode - 1) * DOLPHIN_COUNT_PER_ELECTRODE;
1835
1836 if (alps_exit_command_mode(psmouse))
1837 return -1;
1838
1839 return 0;
1840}
1841
1842static int alps_hw_init_dolphin_v1(struct psmouse *psmouse)
1843{
1844 struct ps2dev *ps2dev = &psmouse->ps2dev;
1845 unsigned char param[2];
1846
1847 /* This is dolphin "v1" as empirically defined by florin9doi */
1848 param[0] = 0x64;
1849 param[1] = 0x28;
1850
1851 if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) ||
1852 ps2_command(ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE) ||
1853 ps2_command(ps2dev, ¶m[1], PSMOUSE_CMD_SETRATE))
1854 return -1;
1855
1856 return 0;
1857}
1858
1859static void alps_set_defaults(struct alps_data *priv)
1860{
1861 priv->byte0 = 0x8f;
1862 priv->mask0 = 0x8f;
1863 priv->flags = ALPS_DUALPOINT;
1864
1865 priv->x_max = 2000;
1866 priv->y_max = 1400;
1867 priv->x_bits = 15;
1868 priv->y_bits = 11;
1869
1870 switch (priv->proto_version) {
1871 case ALPS_PROTO_V1:
1872 case ALPS_PROTO_V2:
1873 priv->hw_init = alps_hw_init_v1_v2;
1874 priv->process_packet = alps_process_packet_v1_v2;
1875 priv->set_abs_params = alps_set_abs_params_st;
1876 priv->x_max = 1023;
1877 priv->y_max = 767;
1878 break;
1879 case ALPS_PROTO_V3:
1880 priv->hw_init = alps_hw_init_v3;
1881 priv->process_packet = alps_process_packet_v3;
1882 priv->set_abs_params = alps_set_abs_params_mt;
1883 priv->decode_fields = alps_decode_pinnacle;
1884 priv->nibble_commands = alps_v3_nibble_commands;
1885 priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
1886 break;
1887 case ALPS_PROTO_V4:
1888 priv->hw_init = alps_hw_init_v4;
1889 priv->process_packet = alps_process_packet_v4;
1890 priv->set_abs_params = alps_set_abs_params_mt;
1891 priv->nibble_commands = alps_v4_nibble_commands;
1892 priv->addr_command = PSMOUSE_CMD_DISABLE;
1893 break;
1894 case ALPS_PROTO_V5:
1895 priv->hw_init = alps_hw_init_dolphin_v1;
1896 priv->process_packet = alps_process_touchpad_packet_v3_v5;
1897 priv->decode_fields = alps_decode_dolphin;
1898 priv->set_abs_params = alps_set_abs_params_mt;
1899 priv->nibble_commands = alps_v3_nibble_commands;
1900 priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
1901 priv->byte0 = 0xc8;
1902 priv->mask0 = 0xd8;
1903 priv->flags = 0;
1904 priv->x_max = 1360;
1905 priv->y_max = 660;
1906 priv->x_bits = 23;
1907 priv->y_bits = 12;
1908 break;
1909 case ALPS_PROTO_V6:
1910 priv->hw_init = alps_hw_init_v6;
1911 priv->process_packet = alps_process_packet_v6;
1912 priv->set_abs_params = alps_set_abs_params_st;
1913 priv->nibble_commands = alps_v6_nibble_commands;
1914 priv->x_max = 2047;
1915 priv->y_max = 1535;
1916 break;
1917 }
1918}
1919
1920static int alps_match_table(struct psmouse *psmouse, struct alps_data *priv,
1921 unsigned char *e7, unsigned char *ec)
1922{
1923 const struct alps_model_info *model;
1924 int i;
1925
1926 for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) {
1927 model = &alps_model_data[i];
1928
1929 if (!memcmp(e7, model->signature, sizeof(model->signature)) &&
1930 (!model->command_mode_resp ||
1931 model->command_mode_resp == ec[2])) {
1932
1933 priv->proto_version = model->proto_version;
1934 alps_set_defaults(priv);
1935
1936 priv->flags = model->flags;
1937 priv->byte0 = model->byte0;
1938 priv->mask0 = model->mask0;
1939
1940 return 0;
1941 }
1942 }
1943
1944 return -EINVAL;
1945}
1946
1947static int alps_identify(struct psmouse *psmouse, struct alps_data *priv)
1948{
1949 unsigned char e6[4], e7[4], ec[4];
1950
1951 /*
1952 * First try "E6 report".
1953 * ALPS should return 0,0,10 or 0,0,100 if no buttons are pressed.
1954 * The bits 0-2 of the first byte will be 1s if some buttons are
1955 * pressed.
1956 */
1957 if (alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES,
1958 PSMOUSE_CMD_SETSCALE11, e6))
1959 return -EIO;
1960
1961 if ((e6[0] & 0xf8) != 0 || e6[1] != 0 || (e6[2] != 10 && e6[2] != 100))
1962 return -EINVAL;
1963
1964 /*
1965 * Now get the "E7" and "EC" reports. These will uniquely identify
1966 * most ALPS touchpads.
1967 */
1968 if (alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES,
1969 PSMOUSE_CMD_SETSCALE21, e7) ||
1970 alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES,
1971 PSMOUSE_CMD_RESET_WRAP, ec) ||
1972 alps_exit_command_mode(psmouse))
1973 return -EIO;
1974
1975 if (alps_match_table(psmouse, priv, e7, ec) == 0) {
1976 return 0;
1977 } else if (e7[0] == 0x73 && e7[1] == 0x03 && e7[2] == 0x50 &&
1978 ec[0] == 0x73 && (ec[1] == 0x01 || ec[1] == 0x02)) {
1979 priv->proto_version = ALPS_PROTO_V5;
1980 alps_set_defaults(priv);
1981 if (alps_dolphin_get_device_area(psmouse, priv))
1982 return -EIO;
1983 else
1984 return 0;
1985 } else if (ec[0] == 0x88 && ec[1] == 0x08) {
1986 priv->proto_version = ALPS_PROTO_V3;
1987 alps_set_defaults(priv);
1988
1989 priv->hw_init = alps_hw_init_rushmore_v3;
1990 priv->decode_fields = alps_decode_rushmore;
1991 priv->x_bits = 16;
1992 priv->y_bits = 12;
1993
1994 /* hack to make addr_command, nibble_command available */
1995 psmouse->private = priv;
1996
1997 if (alps_probe_trackstick_v3(psmouse, ALPS_REG_BASE_RUSHMORE))
1998 priv->flags &= ~ALPS_DUALPOINT;
1999
2000 return 0;
2001 } else if (ec[0] == 0x88 && ec[1] == 0x07 &&
2002 ec[2] >= 0x90 && ec[2] <= 0x9d) {
2003 priv->proto_version = ALPS_PROTO_V3;
2004 alps_set_defaults(priv);
2005
2006 return 0;
2007 }
2008
2009 psmouse_info(psmouse,
2010 "Unknown ALPS touchpad: E7=%3ph, EC=%3ph\n", e7, ec);
2011
2012 return -EINVAL;
2013}
2014
2015static int alps_reconnect(struct psmouse *psmouse)
2016{
2017 struct alps_data *priv = psmouse->private;
2018
2019 psmouse_reset(psmouse);
2020
2021 if (alps_identify(psmouse, priv) < 0)
2022 return -1;
2023
2024 return priv->hw_init(psmouse);
2025}
2026
2027static void alps_disconnect(struct psmouse *psmouse)
2028{
2029 struct alps_data *priv = psmouse->private;
2030
2031 psmouse_reset(psmouse);
2032 del_timer_sync(&priv->timer);
2033 input_unregister_device(priv->dev2);
2034 kfree(priv);
2035}
2036
2037static void alps_set_abs_params_st(struct alps_data *priv,
2038 struct input_dev *dev1)
2039{
2040 input_set_abs_params(dev1, ABS_X, 0, priv->x_max, 0, 0);
2041 input_set_abs_params(dev1, ABS_Y, 0, priv->y_max, 0, 0);
2042}
2043
2044static void alps_set_abs_params_mt(struct alps_data *priv,
2045 struct input_dev *dev1)
2046{
2047 set_bit(INPUT_PROP_SEMI_MT, dev1->propbit);
2048 input_mt_init_slots(dev1, 2, 0);
2049 input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, priv->x_max, 0, 0);
2050 input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, priv->y_max, 0, 0);
2051
2052 set_bit(BTN_TOOL_DOUBLETAP, dev1->keybit);
2053 set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit);
2054 set_bit(BTN_TOOL_QUADTAP, dev1->keybit);
2055
2056 input_set_abs_params(dev1, ABS_X, 0, priv->x_max, 0, 0);
2057 input_set_abs_params(dev1, ABS_Y, 0, priv->y_max, 0, 0);
2058}
2059
2060int alps_init(struct psmouse *psmouse)
2061{
2062 struct alps_data *priv;
2063 struct input_dev *dev1 = psmouse->dev, *dev2;
2064
2065 priv = kzalloc(sizeof(struct alps_data), GFP_KERNEL);
2066 dev2 = input_allocate_device();
2067 if (!priv || !dev2)
2068 goto init_fail;
2069
2070 priv->dev2 = dev2;
2071 setup_timer(&priv->timer, alps_flush_packet, (unsigned long)psmouse);
2072
2073 psmouse->private = priv;
2074
2075 psmouse_reset(psmouse);
2076
2077 if (alps_identify(psmouse, priv) < 0)
2078 goto init_fail;
2079
2080 if (priv->hw_init(psmouse))
2081 goto init_fail;
2082
2083 /*
2084 * Undo part of setup done for us by psmouse core since touchpad
2085 * is not a relative device.
2086 */
2087 __clear_bit(EV_REL, dev1->evbit);
2088 __clear_bit(REL_X, dev1->relbit);
2089 __clear_bit(REL_Y, dev1->relbit);
2090
2091 /*
2092 * Now set up our capabilities.
2093 */
2094 dev1->evbit[BIT_WORD(EV_KEY)] |= BIT_MASK(EV_KEY);
2095 dev1->keybit[BIT_WORD(BTN_TOUCH)] |= BIT_MASK(BTN_TOUCH);
2096 dev1->keybit[BIT_WORD(BTN_TOOL_FINGER)] |= BIT_MASK(BTN_TOOL_FINGER);
2097 dev1->keybit[BIT_WORD(BTN_LEFT)] |=
2098 BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT);
2099
2100 dev1->evbit[BIT_WORD(EV_ABS)] |= BIT_MASK(EV_ABS);
2101
2102 priv->set_abs_params(priv, dev1);
2103 input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0);
2104
2105 if (priv->flags & ALPS_WHEEL) {
2106 dev1->evbit[BIT_WORD(EV_REL)] |= BIT_MASK(EV_REL);
2107 dev1->relbit[BIT_WORD(REL_WHEEL)] |= BIT_MASK(REL_WHEEL);
2108 }
2109
2110 if (priv->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) {
2111 dev1->keybit[BIT_WORD(BTN_FORWARD)] |= BIT_MASK(BTN_FORWARD);
2112 dev1->keybit[BIT_WORD(BTN_BACK)] |= BIT_MASK(BTN_BACK);
2113 }
2114
2115 if (priv->flags & ALPS_FOUR_BUTTONS) {
2116 dev1->keybit[BIT_WORD(BTN_0)] |= BIT_MASK(BTN_0);
2117 dev1->keybit[BIT_WORD(BTN_1)] |= BIT_MASK(BTN_1);
2118 dev1->keybit[BIT_WORD(BTN_2)] |= BIT_MASK(BTN_2);
2119 dev1->keybit[BIT_WORD(BTN_3)] |= BIT_MASK(BTN_3);
2120 } else {
2121 dev1->keybit[BIT_WORD(BTN_MIDDLE)] |= BIT_MASK(BTN_MIDDLE);
2122 }
2123
2124 snprintf(priv->phys, sizeof(priv->phys), "%s/input1", psmouse->ps2dev.serio->phys);
2125 dev2->phys = priv->phys;
2126 dev2->name = (priv->flags & ALPS_DUALPOINT) ?
2127 "DualPoint Stick" : "ALPS PS/2 Device";
2128 dev2->id.bustype = BUS_I8042;
2129 dev2->id.vendor = 0x0002;
2130 dev2->id.product = PSMOUSE_ALPS;
2131 dev2->id.version = 0x0000;
2132 dev2->dev.parent = &psmouse->ps2dev.serio->dev;
2133
2134 dev2->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
2135 dev2->relbit[BIT_WORD(REL_X)] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
2136 dev2->keybit[BIT_WORD(BTN_LEFT)] =
2137 BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
2138
2139 if (input_register_device(priv->dev2))
2140 goto init_fail;
2141
2142 psmouse->protocol_handler = alps_process_byte;
2143 psmouse->poll = alps_poll;
2144 psmouse->disconnect = alps_disconnect;
2145 psmouse->reconnect = alps_reconnect;
2146 psmouse->pktsize = priv->proto_version == ALPS_PROTO_V4 ? 8 : 6;
2147
2148 /* We are having trouble resyncing ALPS touchpads so disable it for now */
2149 psmouse->resync_time = 0;
2150
2151 return 0;
2152
2153init_fail:
2154 psmouse_reset(psmouse);
2155 input_free_device(dev2);
2156 kfree(priv);
2157 psmouse->private = NULL;
2158 return -1;
2159}
2160
2161int alps_detect(struct psmouse *psmouse, bool set_properties)
2162{
2163 struct alps_data dummy;
2164
2165 if (alps_identify(psmouse, &dummy) < 0)
2166 return -1;
2167
2168 if (set_properties) {
2169 psmouse->vendor = "ALPS";
2170 psmouse->name = dummy.flags & ALPS_DUALPOINT ?
2171 "DualPoint TouchPad" : "GlidePoint";
2172 psmouse->model = dummy.proto_version << 8;
2173 }
2174 return 0;
2175}
2176