Linux Audio

Check our new training course

Open-source upstreaming

Need help get the support for your hardware in upstream Linux?
Loading...
v6.13.7
  1// SPDX-License-Identifier: GPL-2.0+
  2//
  3// MXS GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
  4// Copyright 2008 Juergen Beisert, kernel@pengutronix.de
  5//
  6// Based on code from Freescale,
  7// Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  8
  9#include <linux/err.h>
 10#include <linux/init.h>
 11#include <linux/interrupt.h>
 12#include <linux/io.h>
 13#include <linux/irq.h>
 14#include <linux/irqdomain.h>
 
 15#include <linux/of.h>
 16#include <linux/of_address.h>
 
 17#include <linux/platform_device.h>
 18#include <linux/slab.h>
 19#include <linux/gpio/driver.h>
 20#include <linux/module.h>
 21
 22#define MXS_SET		0x4
 23#define MXS_CLR		0x8
 24
 25#define PINCTRL_DOUT(p)		((is_imx23_gpio(p) ? 0x0500 : 0x0700) + (p->id) * 0x10)
 26#define PINCTRL_DIN(p)		((is_imx23_gpio(p) ? 0x0600 : 0x0900) + (p->id) * 0x10)
 27#define PINCTRL_DOE(p)		((is_imx23_gpio(p) ? 0x0700 : 0x0b00) + (p->id) * 0x10)
 28#define PINCTRL_PIN2IRQ(p)	((is_imx23_gpio(p) ? 0x0800 : 0x1000) + (p->id) * 0x10)
 29#define PINCTRL_IRQEN(p)	((is_imx23_gpio(p) ? 0x0900 : 0x1100) + (p->id) * 0x10)
 30#define PINCTRL_IRQLEV(p)	((is_imx23_gpio(p) ? 0x0a00 : 0x1200) + (p->id) * 0x10)
 31#define PINCTRL_IRQPOL(p)	((is_imx23_gpio(p) ? 0x0b00 : 0x1300) + (p->id) * 0x10)
 32#define PINCTRL_IRQSTAT(p)	((is_imx23_gpio(p) ? 0x0c00 : 0x1400) + (p->id) * 0x10)
 33
 34#define GPIO_INT_FALL_EDGE	0x0
 35#define GPIO_INT_LOW_LEV	0x1
 36#define GPIO_INT_RISE_EDGE	0x2
 37#define GPIO_INT_HIGH_LEV	0x3
 38#define GPIO_INT_LEV_MASK	(1 << 0)
 39#define GPIO_INT_POL_MASK	(1 << 1)
 40
 41enum mxs_gpio_id {
 42	IMX23_GPIO,
 43	IMX28_GPIO,
 44};
 45
 46struct mxs_gpio_port {
 47	void __iomem *base;
 48	int id;
 49	int irq;
 50	struct irq_domain *domain;
 51	struct gpio_chip gc;
 52	struct device *dev;
 53	enum mxs_gpio_id devid;
 54	u32 both_edges;
 55};
 56
 57static inline int is_imx23_gpio(struct mxs_gpio_port *port)
 58{
 59	return port->devid == IMX23_GPIO;
 60}
 61
 
 
 
 
 
 62/* Note: This driver assumes 32 GPIOs are handled in one register */
 63
 64static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type)
 65{
 66	u32 val;
 67	u32 pin_mask = 1 << d->hwirq;
 68	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
 69	struct irq_chip_type *ct = irq_data_get_chip_type(d);
 70	struct mxs_gpio_port *port = gc->private;
 71	void __iomem *pin_addr;
 72	int edge;
 73
 74	if (!(ct->type & type))
 75		if (irq_setup_alt_chip(d, type))
 76			return -EINVAL;
 77
 78	port->both_edges &= ~pin_mask;
 79	switch (type) {
 80	case IRQ_TYPE_EDGE_BOTH:
 81		val = readl(port->base + PINCTRL_DIN(port)) & pin_mask;
 82		if (val)
 83			edge = GPIO_INT_FALL_EDGE;
 84		else
 85			edge = GPIO_INT_RISE_EDGE;
 86		port->both_edges |= pin_mask;
 87		break;
 88	case IRQ_TYPE_EDGE_RISING:
 89		edge = GPIO_INT_RISE_EDGE;
 90		break;
 91	case IRQ_TYPE_EDGE_FALLING:
 92		edge = GPIO_INT_FALL_EDGE;
 93		break;
 94	case IRQ_TYPE_LEVEL_LOW:
 95		edge = GPIO_INT_LOW_LEV;
 96		break;
 97	case IRQ_TYPE_LEVEL_HIGH:
 98		edge = GPIO_INT_HIGH_LEV;
 99		break;
100	default:
101		return -EINVAL;
102	}
103
104	/* set level or edge */
105	pin_addr = port->base + PINCTRL_IRQLEV(port);
106	if (edge & GPIO_INT_LEV_MASK) {
107		writel(pin_mask, pin_addr + MXS_SET);
108		writel(pin_mask, port->base + PINCTRL_IRQEN(port) + MXS_SET);
109	} else {
110		writel(pin_mask, pin_addr + MXS_CLR);
111		writel(pin_mask, port->base + PINCTRL_PIN2IRQ(port) + MXS_SET);
112	}
113
114	/* set polarity */
115	pin_addr = port->base + PINCTRL_IRQPOL(port);
116	if (edge & GPIO_INT_POL_MASK)
117		writel(pin_mask, pin_addr + MXS_SET);
118	else
119		writel(pin_mask, pin_addr + MXS_CLR);
120
121	writel(pin_mask, port->base + PINCTRL_IRQSTAT(port) + MXS_CLR);
 
122
123	return 0;
124}
125
126static void mxs_flip_edge(struct mxs_gpio_port *port, u32 gpio)
127{
128	u32 bit, val, edge;
129	void __iomem *pin_addr;
130
131	bit = 1 << gpio;
132
133	pin_addr = port->base + PINCTRL_IRQPOL(port);
134	val = readl(pin_addr);
135	edge = val & bit;
136
137	if (edge)
138		writel(bit, pin_addr + MXS_CLR);
139	else
140		writel(bit, pin_addr + MXS_SET);
141}
142
143/* MXS has one interrupt *per* gpio port */
144static void mxs_gpio_irq_handler(struct irq_desc *desc)
145{
146	u32 irq_stat;
147	struct mxs_gpio_port *port = irq_desc_get_handler_data(desc);
148
149	desc->irq_data.chip->irq_ack(&desc->irq_data);
150
151	irq_stat = readl(port->base + PINCTRL_IRQSTAT(port)) &
152			readl(port->base + PINCTRL_IRQEN(port));
153
154	while (irq_stat != 0) {
155		int irqoffset = fls(irq_stat) - 1;
156		if (port->both_edges & (1 << irqoffset))
157			mxs_flip_edge(port, irqoffset);
158
159		generic_handle_domain_irq(port->domain, irqoffset);
160		irq_stat &= ~(1 << irqoffset);
161	}
162}
163
164/*
165 * Set interrupt number "irq" in the GPIO as a wake-up source.
166 * While system is running, all registered GPIO interrupts need to have
167 * wake-up enabled. When system is suspended, only selected GPIO interrupts
168 * need to have wake-up enabled.
169 * @param  irq          interrupt source number
170 * @param  enable       enable as wake-up if equal to non-zero
171 * @return       This function returns 0 on success.
172 */
173static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable)
174{
175	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
176	struct mxs_gpio_port *port = gc->private;
177
178	if (enable)
179		enable_irq_wake(port->irq);
180	else
181		disable_irq_wake(port->irq);
182
183	return 0;
184}
185
186static int mxs_gpio_init_gc(struct mxs_gpio_port *port, int irq_base)
187{
188	struct irq_chip_generic *gc;
189	struct irq_chip_type *ct;
190	int rv;
191
192	gc = devm_irq_alloc_generic_chip(port->dev, "gpio-mxs", 2, irq_base,
193					 port->base, handle_level_irq);
194	if (!gc)
195		return -ENOMEM;
196
 
 
197	gc->private = port;
198
199	ct = &gc->chip_types[0];
200	ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW;
201	ct->chip.irq_ack = irq_gc_ack_set_bit;
202	ct->chip.irq_mask = irq_gc_mask_disable_reg;
203	ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
204	ct->chip.irq_set_type = mxs_gpio_set_irq_type;
205	ct->chip.irq_set_wake = mxs_gpio_set_wake_irq;
206	ct->chip.flags = IRQCHIP_SET_TYPE_MASKED;
207	ct->regs.ack = PINCTRL_IRQSTAT(port) + MXS_CLR;
208	ct->regs.enable = PINCTRL_PIN2IRQ(port) + MXS_SET;
209	ct->regs.disable = PINCTRL_PIN2IRQ(port) + MXS_CLR;
210
211	ct = &gc->chip_types[1];
212	ct->type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
213	ct->chip.irq_ack = irq_gc_ack_set_bit;
214	ct->chip.irq_mask = irq_gc_mask_disable_reg;
215	ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
216	ct->chip.irq_set_type = mxs_gpio_set_irq_type;
217	ct->chip.irq_set_wake = mxs_gpio_set_wake_irq;
218	ct->chip.flags = IRQCHIP_SET_TYPE_MASKED;
219	ct->regs.ack = PINCTRL_IRQSTAT(port) + MXS_CLR;
220	ct->regs.enable = PINCTRL_IRQEN(port) + MXS_SET;
221	ct->regs.disable = PINCTRL_IRQEN(port) + MXS_CLR;
222	ct->handler = handle_level_irq;
223
224	rv = devm_irq_setup_generic_chip(port->dev, gc, IRQ_MSK(32),
225					 IRQ_GC_INIT_NESTED_LOCK,
226					 IRQ_NOREQUEST, 0);
227
228	return rv;
229}
230
231static int mxs_gpio_to_irq(struct gpio_chip *gc, unsigned int offset)
232{
233	struct mxs_gpio_port *port = gpiochip_get_data(gc);
 
 
234
235	return irq_find_mapping(port->domain, offset);
236}
237
238static int mxs_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
239{
240	struct mxs_gpio_port *port = gpiochip_get_data(gc);
241	u32 mask = 1 << offset;
242	u32 dir;
243
244	dir = readl(port->base + PINCTRL_DOE(port));
245	if (dir & mask)
246		return GPIO_LINE_DIRECTION_OUT;
247
248	return GPIO_LINE_DIRECTION_IN;
249}
250
251static const struct of_device_id mxs_gpio_dt_ids[] = {
252	{ .compatible = "fsl,imx23-gpio", .data = (void *) IMX23_GPIO, },
253	{ .compatible = "fsl,imx28-gpio", .data = (void *) IMX28_GPIO, },
254	{ /* sentinel */ }
255};
256MODULE_DEVICE_TABLE(of, mxs_gpio_dt_ids);
257
258static int mxs_gpio_probe(struct platform_device *pdev)
259{
 
 
260	struct device_node *np = pdev->dev.of_node;
261	struct device_node *parent;
262	static void __iomem *base;
263	struct mxs_gpio_port *port;
264	int irq_base;
265	int err;
266
267	port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
268	if (!port)
269		return -ENOMEM;
270
271	port->id = of_alias_get_id(np, "gpio");
272	if (port->id < 0)
273		return port->id;
274	port->devid = (uintptr_t)of_device_get_match_data(&pdev->dev);
275	port->dev = &pdev->dev;
276	port->irq = platform_get_irq(pdev, 0);
277	if (port->irq < 0)
278		return port->irq;
279
280	/*
281	 * map memory region only once, as all the gpio ports
282	 * share the same one
283	 */
284	if (!base) {
285		parent = of_get_parent(np);
286		base = of_iomap(parent, 0);
287		of_node_put(parent);
288		if (!base)
289			return -EADDRNOTAVAIL;
290	}
291	port->base = base;
292
293	/* initially disable the interrupts */
294	writel(0, port->base + PINCTRL_PIN2IRQ(port));
 
 
 
295	writel(0, port->base + PINCTRL_IRQEN(port));
296
297	/* clear address has to be used to clear IRQSTAT bits */
298	writel(~0U, port->base + PINCTRL_IRQSTAT(port) + MXS_CLR);
299
300	irq_base = devm_irq_alloc_descs(&pdev->dev, -1, 0, 32, numa_node_id());
301	if (irq_base < 0) {
302		err = irq_base;
303		goto out_iounmap;
304	}
305
306	port->domain = irq_domain_add_legacy(np, 32, irq_base, 0,
307					     &irq_domain_simple_ops, NULL);
308	if (!port->domain) {
309		err = -ENODEV;
310		goto out_iounmap;
311	}
312
313	/* gpio-mxs can be a generic irq chip */
314	err = mxs_gpio_init_gc(port, irq_base);
315	if (err < 0)
316		goto out_irqdomain_remove;
317
318	/* setup one handler for each entry */
319	irq_set_chained_handler_and_data(port->irq, mxs_gpio_irq_handler,
320					 port);
321
322	err = bgpio_init(&port->gc, &pdev->dev, 4,
323			 port->base + PINCTRL_DIN(port),
324			 port->base + PINCTRL_DOUT(port) + MXS_SET,
325			 port->base + PINCTRL_DOUT(port) + MXS_CLR,
326			 port->base + PINCTRL_DOE(port), NULL, 0);
327	if (err)
328		goto out_irqdomain_remove;
329
330	port->gc.to_irq = mxs_gpio_to_irq;
331	port->gc.get_direction = mxs_gpio_get_direction;
332	port->gc.base = port->id * 32;
333
334	err = gpiochip_add_data(&port->gc, port);
335	if (err)
336		goto out_irqdomain_remove;
337
338	return 0;
339
340out_irqdomain_remove:
341	irq_domain_remove(port->domain);
342out_iounmap:
343	iounmap(port->base);
344	return err;
345}
346
347static struct platform_driver mxs_gpio_driver = {
348	.driver		= {
349		.name	= "gpio-mxs",
 
350		.of_match_table = mxs_gpio_dt_ids,
351		.suppress_bind_attrs = true,
352	},
353	.probe		= mxs_gpio_probe,
 
354};
355
356static int __init mxs_gpio_init(void)
357{
358	return platform_driver_register(&mxs_gpio_driver);
359}
360postcore_initcall(mxs_gpio_init);
361
362MODULE_AUTHOR("Freescale Semiconductor, "
363	      "Daniel Mack <danielncaiaq.de>, "
364	      "Juergen Beisert <kernel@pengutronix.de>");
365MODULE_DESCRIPTION("Freescale MXS GPIO");
v3.15
  1/*
  2 * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
  3 * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
  4 *
  5 * Based on code from Freescale,
  6 * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
  7 *
  8 * This program is free software; you can redistribute it and/or
  9 * modify it under the terms of the GNU General Public License
 10 * as published by the Free Software Foundation; either version 2
 11 * of the License, or (at your option) any later version.
 12 * This program is distributed in the hope that it will be useful,
 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 15 * GNU General Public License for more details.
 16 *
 17 * You should have received a copy of the GNU General Public License
 18 * along with this program; if not, write to the Free Software
 19 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
 20 * MA  02110-1301, USA.
 21 */
 22
 23#include <linux/err.h>
 24#include <linux/init.h>
 25#include <linux/interrupt.h>
 26#include <linux/io.h>
 27#include <linux/irq.h>
 28#include <linux/irqdomain.h>
 29#include <linux/gpio.h>
 30#include <linux/of.h>
 31#include <linux/of_address.h>
 32#include <linux/of_device.h>
 33#include <linux/platform_device.h>
 34#include <linux/slab.h>
 35#include <linux/basic_mmio_gpio.h>
 36#include <linux/module.h>
 37
 38#define MXS_SET		0x4
 39#define MXS_CLR		0x8
 40
 41#define PINCTRL_DOUT(p)		((is_imx23_gpio(p) ? 0x0500 : 0x0700) + (p->id) * 0x10)
 42#define PINCTRL_DIN(p)		((is_imx23_gpio(p) ? 0x0600 : 0x0900) + (p->id) * 0x10)
 43#define PINCTRL_DOE(p)		((is_imx23_gpio(p) ? 0x0700 : 0x0b00) + (p->id) * 0x10)
 44#define PINCTRL_PIN2IRQ(p)	((is_imx23_gpio(p) ? 0x0800 : 0x1000) + (p->id) * 0x10)
 45#define PINCTRL_IRQEN(p)	((is_imx23_gpio(p) ? 0x0900 : 0x1100) + (p->id) * 0x10)
 46#define PINCTRL_IRQLEV(p)	((is_imx23_gpio(p) ? 0x0a00 : 0x1200) + (p->id) * 0x10)
 47#define PINCTRL_IRQPOL(p)	((is_imx23_gpio(p) ? 0x0b00 : 0x1300) + (p->id) * 0x10)
 48#define PINCTRL_IRQSTAT(p)	((is_imx23_gpio(p) ? 0x0c00 : 0x1400) + (p->id) * 0x10)
 49
 50#define GPIO_INT_FALL_EDGE	0x0
 51#define GPIO_INT_LOW_LEV	0x1
 52#define GPIO_INT_RISE_EDGE	0x2
 53#define GPIO_INT_HIGH_LEV	0x3
 54#define GPIO_INT_LEV_MASK	(1 << 0)
 55#define GPIO_INT_POL_MASK	(1 << 1)
 56
 57enum mxs_gpio_id {
 58	IMX23_GPIO,
 59	IMX28_GPIO,
 60};
 61
 62struct mxs_gpio_port {
 63	void __iomem *base;
 64	int id;
 65	int irq;
 66	struct irq_domain *domain;
 67	struct bgpio_chip bgc;
 
 68	enum mxs_gpio_id devid;
 69	u32 both_edges;
 70};
 71
 72static inline int is_imx23_gpio(struct mxs_gpio_port *port)
 73{
 74	return port->devid == IMX23_GPIO;
 75}
 76
 77static inline int is_imx28_gpio(struct mxs_gpio_port *port)
 78{
 79	return port->devid == IMX28_GPIO;
 80}
 81
 82/* Note: This driver assumes 32 GPIOs are handled in one register */
 83
 84static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type)
 85{
 86	u32 val;
 87	u32 pin_mask = 1 << d->hwirq;
 88	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
 
 89	struct mxs_gpio_port *port = gc->private;
 90	void __iomem *pin_addr;
 91	int edge;
 92
 
 
 
 
 93	port->both_edges &= ~pin_mask;
 94	switch (type) {
 95	case IRQ_TYPE_EDGE_BOTH:
 96		val = gpio_get_value(port->bgc.gc.base + d->hwirq);
 97		if (val)
 98			edge = GPIO_INT_FALL_EDGE;
 99		else
100			edge = GPIO_INT_RISE_EDGE;
101		port->both_edges |= pin_mask;
102		break;
103	case IRQ_TYPE_EDGE_RISING:
104		edge = GPIO_INT_RISE_EDGE;
105		break;
106	case IRQ_TYPE_EDGE_FALLING:
107		edge = GPIO_INT_FALL_EDGE;
108		break;
109	case IRQ_TYPE_LEVEL_LOW:
110		edge = GPIO_INT_LOW_LEV;
111		break;
112	case IRQ_TYPE_LEVEL_HIGH:
113		edge = GPIO_INT_HIGH_LEV;
114		break;
115	default:
116		return -EINVAL;
117	}
118
119	/* set level or edge */
120	pin_addr = port->base + PINCTRL_IRQLEV(port);
121	if (edge & GPIO_INT_LEV_MASK)
122		writel(pin_mask, pin_addr + MXS_SET);
123	else
 
124		writel(pin_mask, pin_addr + MXS_CLR);
 
 
125
126	/* set polarity */
127	pin_addr = port->base + PINCTRL_IRQPOL(port);
128	if (edge & GPIO_INT_POL_MASK)
129		writel(pin_mask, pin_addr + MXS_SET);
130	else
131		writel(pin_mask, pin_addr + MXS_CLR);
132
133	writel(pin_mask,
134	       port->base + PINCTRL_IRQSTAT(port) + MXS_CLR);
135
136	return 0;
137}
138
139static void mxs_flip_edge(struct mxs_gpio_port *port, u32 gpio)
140{
141	u32 bit, val, edge;
142	void __iomem *pin_addr;
143
144	bit = 1 << gpio;
145
146	pin_addr = port->base + PINCTRL_IRQPOL(port);
147	val = readl(pin_addr);
148	edge = val & bit;
149
150	if (edge)
151		writel(bit, pin_addr + MXS_CLR);
152	else
153		writel(bit, pin_addr + MXS_SET);
154}
155
156/* MXS has one interrupt *per* gpio port */
157static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc)
158{
159	u32 irq_stat;
160	struct mxs_gpio_port *port = irq_get_handler_data(irq);
161
162	desc->irq_data.chip->irq_ack(&desc->irq_data);
163
164	irq_stat = readl(port->base + PINCTRL_IRQSTAT(port)) &
165			readl(port->base + PINCTRL_IRQEN(port));
166
167	while (irq_stat != 0) {
168		int irqoffset = fls(irq_stat) - 1;
169		if (port->both_edges & (1 << irqoffset))
170			mxs_flip_edge(port, irqoffset);
171
172		generic_handle_irq(irq_find_mapping(port->domain, irqoffset));
173		irq_stat &= ~(1 << irqoffset);
174	}
175}
176
177/*
178 * Set interrupt number "irq" in the GPIO as a wake-up source.
179 * While system is running, all registered GPIO interrupts need to have
180 * wake-up enabled. When system is suspended, only selected GPIO interrupts
181 * need to have wake-up enabled.
182 * @param  irq          interrupt source number
183 * @param  enable       enable as wake-up if equal to non-zero
184 * @return       This function returns 0 on success.
185 */
186static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable)
187{
188	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
189	struct mxs_gpio_port *port = gc->private;
190
191	if (enable)
192		enable_irq_wake(port->irq);
193	else
194		disable_irq_wake(port->irq);
195
196	return 0;
197}
198
199static void __init mxs_gpio_init_gc(struct mxs_gpio_port *port, int irq_base)
200{
201	struct irq_chip_generic *gc;
202	struct irq_chip_type *ct;
 
 
 
 
 
 
203
204	gc = irq_alloc_generic_chip("gpio-mxs", 1, irq_base,
205				    port->base, handle_level_irq);
206	gc->private = port;
207
208	ct = gc->chip_types;
 
209	ct->chip.irq_ack = irq_gc_ack_set_bit;
210	ct->chip.irq_mask = irq_gc_mask_clr_bit;
211	ct->chip.irq_unmask = irq_gc_mask_set_bit;
212	ct->chip.irq_set_type = mxs_gpio_set_irq_type;
213	ct->chip.irq_set_wake = mxs_gpio_set_wake_irq;
 
214	ct->regs.ack = PINCTRL_IRQSTAT(port) + MXS_CLR;
215	ct->regs.mask = PINCTRL_IRQEN(port);
 
216
217	irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_NESTED_LOCK,
218			       IRQ_NOREQUEST, 0);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
219}
220
221static int mxs_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
222{
223	struct bgpio_chip *bgc = to_bgpio_chip(gc);
224	struct mxs_gpio_port *port =
225		container_of(bgc, struct mxs_gpio_port, bgc);
226
227	return irq_find_mapping(port->domain, offset);
228}
229
230static struct platform_device_id mxs_gpio_ids[] = {
231	{
232		.name = "imx23-gpio",
233		.driver_data = IMX23_GPIO,
234	}, {
235		.name = "imx28-gpio",
236		.driver_data = IMX28_GPIO,
237	}, {
238		/* sentinel */
239	}
240};
241MODULE_DEVICE_TABLE(platform, mxs_gpio_ids);
242
243static const struct of_device_id mxs_gpio_dt_ids[] = {
244	{ .compatible = "fsl,imx23-gpio", .data = (void *) IMX23_GPIO, },
245	{ .compatible = "fsl,imx28-gpio", .data = (void *) IMX28_GPIO, },
246	{ /* sentinel */ }
247};
248MODULE_DEVICE_TABLE(of, mxs_gpio_dt_ids);
249
250static int mxs_gpio_probe(struct platform_device *pdev)
251{
252	const struct of_device_id *of_id =
253			of_match_device(mxs_gpio_dt_ids, &pdev->dev);
254	struct device_node *np = pdev->dev.of_node;
255	struct device_node *parent;
256	static void __iomem *base;
257	struct mxs_gpio_port *port;
258	int irq_base;
259	int err;
260
261	port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
262	if (!port)
263		return -ENOMEM;
264
265	port->id = of_alias_get_id(np, "gpio");
266	if (port->id < 0)
267		return port->id;
268	port->devid = (enum mxs_gpio_id) of_id->data;
 
269	port->irq = platform_get_irq(pdev, 0);
270	if (port->irq < 0)
271		return port->irq;
272
273	/*
274	 * map memory region only once, as all the gpio ports
275	 * share the same one
276	 */
277	if (!base) {
278		parent = of_get_parent(np);
279		base = of_iomap(parent, 0);
280		of_node_put(parent);
281		if (!base)
282			return -EADDRNOTAVAIL;
283	}
284	port->base = base;
285
286	/*
287	 * select the pin interrupt functionality but initially
288	 * disable the interrupts
289	 */
290	writel(~0U, port->base + PINCTRL_PIN2IRQ(port));
291	writel(0, port->base + PINCTRL_IRQEN(port));
292
293	/* clear address has to be used to clear IRQSTAT bits */
294	writel(~0U, port->base + PINCTRL_IRQSTAT(port) + MXS_CLR);
295
296	irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id());
297	if (irq_base < 0)
298		return irq_base;
 
 
299
300	port->domain = irq_domain_add_legacy(np, 32, irq_base, 0,
301					     &irq_domain_simple_ops, NULL);
302	if (!port->domain) {
303		err = -ENODEV;
304		goto out_irqdesc_free;
305	}
306
307	/* gpio-mxs can be a generic irq chip */
308	mxs_gpio_init_gc(port, irq_base);
 
 
309
310	/* setup one handler for each entry */
311	irq_set_chained_handler(port->irq, mxs_gpio_irq_handler);
312	irq_set_handler_data(port->irq, port);
313
314	err = bgpio_init(&port->bgc, &pdev->dev, 4,
315			 port->base + PINCTRL_DIN(port),
316			 port->base + PINCTRL_DOUT(port) + MXS_SET,
317			 port->base + PINCTRL_DOUT(port) + MXS_CLR,
318			 port->base + PINCTRL_DOE(port), NULL, 0);
319	if (err)
320		goto out_irqdesc_free;
321
322	port->bgc.gc.to_irq = mxs_gpio_to_irq;
323	port->bgc.gc.base = port->id * 32;
 
324
325	err = gpiochip_add(&port->bgc.gc);
326	if (err)
327		goto out_bgpio_remove;
328
329	return 0;
330
331out_bgpio_remove:
332	bgpio_remove(&port->bgc);
333out_irqdesc_free:
334	irq_free_descs(irq_base, 32);
335	return err;
336}
337
338static struct platform_driver mxs_gpio_driver = {
339	.driver		= {
340		.name	= "gpio-mxs",
341		.owner	= THIS_MODULE,
342		.of_match_table = mxs_gpio_dt_ids,
 
343	},
344	.probe		= mxs_gpio_probe,
345	.id_table	= mxs_gpio_ids,
346};
347
348static int __init mxs_gpio_init(void)
349{
350	return platform_driver_register(&mxs_gpio_driver);
351}
352postcore_initcall(mxs_gpio_init);
353
354MODULE_AUTHOR("Freescale Semiconductor, "
355	      "Daniel Mack <danielncaiaq.de>, "
356	      "Juergen Beisert <kernel@pengutronix.de>");
357MODULE_DESCRIPTION("Freescale MXS GPIO");
358MODULE_LICENSE("GPL");