Linux Audio

Check our new training course

Linux BSP upgrade and security maintenance

Need help to get security updates for your Linux BSP?
Loading...
Note: File does not exist in v6.13.7.
  1/*
  2 * MPC8536DS Device Tree Source stub (no addresses or top-level ranges)
  3 *
  4 * Copyright 2011 Freescale Semiconductor Inc.
  5 *
  6 * Redistribution and use in source and binary forms, with or without
  7 * modification, are permitted provided that the following conditions are met:
  8 *     * Redistributions of source code must retain the above copyright
  9 *       notice, this list of conditions and the following disclaimer.
 10 *     * Redistributions in binary form must reproduce the above copyright
 11 *       notice, this list of conditions and the following disclaimer in the
 12 *       documentation and/or other materials provided with the distribution.
 13 *     * Neither the name of Freescale Semiconductor nor the
 14 *       names of its contributors may be used to endorse or promote products
 15 *       derived from this software without specific prior written permission.
 16 *
 17 *
 18 * ALTERNATIVELY, this software may be distributed under the terms of the
 19 * GNU General Public License ("GPL") as published by the Free Software
 20 * Foundation, either version 2 of that License or (at your option) any
 21 * later version.
 22 *
 23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
 24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
 27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 33 */
 34
 35&lbc {
 36	nor@0,0 {
 37		#address-cells = <1>;
 38		#size-cells = <1>;
 39		compatible = "cfi-flash";
 40		reg = <0x0 0x0 0x8000000>;
 41		bank-width = <2>;
 42		device-width = <1>;
 43
 44		partition@0 {
 45			reg = <0x0 0x03000000>;
 46			label = "ramdisk-nor";
 47		};
 48
 49		partition@3000000 {
 50			reg = <0x03000000 0x00e00000>;
 51			label = "diagnostic-nor";
 52			read-only;
 53		};
 54
 55		partition@3e00000 {
 56			reg = <0x03e00000 0x00200000>;
 57			label = "dink-nor";
 58			read-only;
 59		};
 60
 61		partition@4000000 {
 62			reg = <0x04000000 0x00400000>;
 63			label = "kernel-nor";
 64		};
 65
 66		partition@4400000 {
 67			reg = <0x04400000 0x03b00000>;
 68			label = "fs-nor";
 69		};
 70
 71		partition@7f00000 {
 72			reg = <0x07f00000 0x00080000>;
 73			label = "dtb-nor";
 74		};
 75
 76		partition@7f80000 {
 77			reg = <0x07f80000 0x00080000>;
 78			label = "u-boot-nor";
 79			read-only;
 80		};
 81	};
 82
 83	nand@2,0 {
 84		#address-cells = <1>;
 85		#size-cells = <1>;
 86		compatible = "fsl,mpc8536-fcm-nand",
 87			     "fsl,elbc-fcm-nand";
 88		reg = <0x2 0x0 0x40000>;
 89
 90		partition@0 {
 91			reg = <0x0 0x02000000>;
 92			label = "u-boot-nand";
 93			read-only;
 94		};
 95
 96		partition@2000000 {
 97			reg = <0x02000000 0x10000000>;
 98			label = "fs-nand";
 99		};
100
101		partition@12000000 {
102			reg = <0x12000000 0x08000000>;
103			label = "ramdisk-nand";
104		};
105
106		partition@1a000000 {
107			reg = <0x1a000000 0x04000000>;
108			label = "kernel-nand";
109		};
110
111		partition@1e000000 {
112			reg = <0x1e000000 0x01000000>;
113			label = "dtb-nand";
114		};
115
116		partition@1f000000 {
117			reg = <0x1f000000 0x21000000>;
118			label = "empty-nand";
119		};
120	};
121
122	board-control@3,0 {
123		compatible = "fsl,mpc8536ds-fpga-pixis";
124		reg = <0x3 0x0 0x8000>;
125	};
126};
127
128&board_soc {
129	i2c@3100 {
130		rtc@68 {
131			compatible = "dallas,ds3232";
132			reg = <0x68>;
133			interrupts = <0 0x1 0 0>;
134		};
135		adt7461@4c {
136			compatible = "adi,adt7461";
137			reg = <0x4c>;
138		};
139	};
140
141	spi@7000 {
142		flash@0 {
143			#address-cells = <1>;
144			#size-cells = <1>;
145			compatible = "spansion,s25sl12801";
146			reg = <0>;
147			spi-max-frequency = <40000000>;
148			partition@u-boot {
149				label = "u-boot";
150				reg = <0x00000000 0x00100000>;
151				read-only;
152			};
153			partition@kernel {
154				label = "kernel";
155				reg = <0x00100000 0x00500000>;
156				read-only;
157			};
158			partition@dtb {
159				label = "dtb";
160				reg = <0x00600000 0x00100000>;
161				read-only;
162			};
163			partition@fs {
164				label = "file system";
165				reg = <0x00700000 0x00900000>;
166			};
167		};
168		flash@1 {
169			compatible = "spansion,s25sl12801";
170			reg = <1>;
171			spi-max-frequency = <40000000>;
172		};
173		flash@2 {
174			compatible = "spansion,s25sl12801";
175			reg = <2>;
176			spi-max-frequency = <40000000>;
177		};
178		flash@3 {
179			compatible = "spansion,s25sl12801";
180			reg = <3>;
181			spi-max-frequency = <40000000>;
182		};
183	};
184
185	usb@22000 {
186		phy_type = "ulpi";
187	};
188
189	usb@23000 {
190		phy_type = "ulpi";
191	};
192
193	enet0: ethernet@24000 {
194		tbi-handle = <&tbi0>;
195		phy-handle = <&phy1>;
196		phy-connection-type = "rgmii-id";
197	};
198
199	mdio@24520 {
200		phy0: ethernet-phy@0 {
201			interrupts = <10 0x1 0 0>;
202			reg = <0>;
203		};
204		phy1: ethernet-phy@1 {
205			interrupts = <10 0x1 0 0>;
206			reg = <1>;
207		};
208		sgmii_phy0: sgmii-phy@0 {
209			interrupts = <6 1 0 0>;
210			reg = <0x1d>;
211		};
212		sgmii_phy1: sgmii-phy@1 {
213			interrupts = <6 1 0 0>;
214			reg = <0x1c>;
215		};
216		tbi0: tbi-phy@11 {
217			reg = <0x11>;
218			device_type = "tbi-phy";
219		};
220	};
221
222	enet2: ethernet@26000 {
223		tbi-handle = <&tbi1>;
224		phy-handle = <&phy0>;
225		phy-connection-type = "rgmii-id";
226	};
227
228	mdio@26520 {
229		#address-cells = <1>;
230		#size-cells = <0>;
231		compatible = "fsl,gianfar-tbi";
232		reg = <0x26520 0x20>;
233
234		tbi1: tbi-phy@11 {
235			reg = <0x11>;
236			device_type = "tbi-phy";
237		};
238	};
239
240	usb@2b000 {
241		dr_mode = "peripheral";
242		phy_type = "ulpi";
243	};
244};