1/*
  2 * Copyright 2012 Maxime Ripard
  3 *
  4 * Maxime Ripard <maxime.ripard@free-electrons.com>
  5 *
  6 * The code contained herein is licensed under the GNU General Public
  7 * License. You may obtain a copy of the GNU General Public License
  8 * Version 2 or later at the following locations:
  9 *
 10 * http://www.opensource.org/licenses/gpl-license.html
 11 * http://www.gnu.org/copyleft/gpl.html
 12 */
 13
 14/dts-v1/;
 15/include/ "sun4i-a10.dtsi"
 16/include/ "sunxi-common-regulators.dtsi"
 17
 18/ {
 19	model = "Miniand Hackberry";
 20	compatible = "miniand,hackberry", "allwinner,sun4i-a10";
 21
 22	soc@01c00000 {
 23		emac: ethernet@01c0b000 {
 24			pinctrl-names = "default";
 25			pinctrl-0 = <&emac_pins_a>;
 26			phy = <&phy0>;
 27			status = "okay";
 28		};
 29
 30		mdio@01c0b080 {
 31			phy-supply = <&reg_emac_3v3>;
 32			status = "okay";
 33
 34			phy0: ethernet-phy@0 {
 35				reg = <0>;
 36			};
 37		};
 38
 39		usbphy: phy@01c13400 {
 40			usb1_vbus-supply = <&reg_usb1_vbus>;
 41			usb2_vbus-supply = <&reg_usb2_vbus>;
 42			status = "okay";
 43		};
 44
 45		ehci0: usb@01c14000 {
 46			status = "okay";
 47		};
 48
 49		ohci0: usb@01c14400 {
 50			status = "okay";
 51		};
 52
 53		ehci1: usb@01c1c000 {
 54			status = "okay";
 55		};
 56
 57		ohci1: usb@01c1c400 {
 58			status = "okay";
 59		};
 60
 61		pio: pinctrl@01c20800 {
 62			pinctrl-names = "default";
 63			pinctrl-0 = <&hackberry_hogs>;
 64
 65			hackberry_hogs: hogs@0 {
 66				allwinner,pins = "PH19";
 67				allwinner,function = "gpio_out";
 68				allwinner,drive = <0>;
 69				allwinner,pull = <0>;
 70			};
 71
 72			usb2_vbus_pin_hackberry: usb2_vbus_pin@0 {
 73					allwinner,pins = "PH12";
 74					allwinner,function = "gpio_out";
 75					allwinner,drive = <0>;
 76					allwinner,pull = <0>;
 77			};
 78		};
 79
 80		uart0: serial@01c28000 {
 81			pinctrl-names = "default";
 82			pinctrl-0 = <&uart0_pins_a>;
 83			status = "okay";
 84		};
 85	};
 86
 87	reg_emac_3v3: emac-3v3 {
 88		compatible = "regulator-fixed";
 89		regulator-name = "emac-3v3";
 90		regulator-min-microvolt = <3300000>;
 91		regulator-max-microvolt = <3300000>;
 92		enable-active-high;
 93		gpio = <&pio 7 19 0>;
 94	};
 95
 96	reg_usb1_vbus: usb1-vbus {
 97		status = "okay";
 98	};
 99
100	reg_usb2_vbus: usb2-vbus {
101		pinctrl-0 = <&usb2_vbus_pin_hackberry>;
102		gpio = <&pio 7 12 0>;
103		status = "okay";
104	};
105};