Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Driver for TWL4030/6030 Pulse Width Modulator used as LED driver
4 *
5 * Copyright (C) 2012 Texas Instruments
6 * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
7 *
8 * This driver is a complete rewrite of the former pwm-twl6030.c authorded by:
9 * Hemanth V <hemanthv@ti.com>
10 *
11 * Reference manual for the twl6030 is available at:
12 * https://www.ti.com/lit/ds/symlink/twl6030.pdf
13 *
14 * Limitations:
15 * - The twl6030 hardware only supports two period lengths (128 clock ticks and
16 * 64 clock ticks), the driver only uses 128 ticks
17 * - The hardware doesn't support ON = 0, so the active part of a period doesn't
18 * start at its beginning.
19 * - The hardware could support inverted polarity (with a similar limitation as
20 * for normal: the last clock tick is always inactive).
21 * - The hardware emits a constant low output when disabled.
22 * - A request for .duty_cycle = 0 results in an output wave with one active
23 * clock tick per period. This should better use the disabled state.
24 * - The driver only implements setting the relative duty cycle.
25 * - The driver doesn't implement .get_state().
26 */
27
28#include <linux/module.h>
29#include <linux/of.h>
30#include <linux/platform_device.h>
31#include <linux/pwm.h>
32#include <linux/mfd/twl.h>
33#include <linux/slab.h>
34
35/*
36 * This driver handles the PWM driven LED terminals of TWL4030 and TWL6030.
37 * To generate the signal on TWL4030:
38 * - LEDA uses PWMA
39 * - LEDB uses PWMB
40 * TWL6030 has one LED pin with dedicated LEDPWM
41 */
42
43#define TWL4030_LED_MAX 0x7f
44#define TWL6030_LED_MAX 0xff
45
46/* Registers, bits and macro for TWL4030 */
47#define TWL4030_LEDEN_REG 0x00
48#define TWL4030_PWMA_REG 0x01
49
50#define TWL4030_LEDXON (1 << 0)
51#define TWL4030_LEDXPWM (1 << 4)
52#define TWL4030_LED_PINS (TWL4030_LEDXON | TWL4030_LEDXPWM)
53#define TWL4030_LED_TOGGLE(led, x) ((x) << (led))
54
55/* Register, bits and macro for TWL6030 */
56#define TWL6030_LED_PWM_CTRL1 0xf4
57#define TWL6030_LED_PWM_CTRL2 0xf5
58
59#define TWL6040_LED_MODE_HW 0x00
60#define TWL6040_LED_MODE_ON 0x01
61#define TWL6040_LED_MODE_OFF 0x02
62#define TWL6040_LED_MODE_MASK 0x03
63
64struct twl_pwmled_chip {
65 struct mutex mutex;
66};
67
68static inline struct twl_pwmled_chip *to_twl(struct pwm_chip *chip)
69{
70 return pwmchip_get_drvdata(chip);
71}
72
73static int twl4030_pwmled_config(struct pwm_chip *chip, struct pwm_device *pwm,
74 int duty_ns, int period_ns)
75{
76 int duty_cycle = DIV_ROUND_UP(duty_ns * TWL4030_LED_MAX, period_ns) + 1;
77 u8 pwm_config[2] = { 1, 0 };
78 int base, ret;
79
80 /*
81 * To configure the duty period:
82 * On-cycle is set to 1 (the minimum allowed value)
83 * The off time of 0 is not configurable, so the mapping is:
84 * 0 -> off cycle = 2,
85 * 1 -> off cycle = 2,
86 * 2 -> off cycle = 3,
87 * 126 - > off cycle 127,
88 * 127 - > off cycle 1
89 * When on cycle == off cycle the PWM will be always on
90 */
91 if (duty_cycle == 1)
92 duty_cycle = 2;
93 else if (duty_cycle > TWL4030_LED_MAX)
94 duty_cycle = 1;
95
96 base = pwm->hwpwm * 2 + TWL4030_PWMA_REG;
97
98 pwm_config[1] = duty_cycle;
99
100 ret = twl_i2c_write(TWL4030_MODULE_LED, pwm_config, base, 2);
101 if (ret < 0)
102 dev_err(pwmchip_parent(chip), "%s: Failed to configure PWM\n", pwm->label);
103
104 return ret;
105}
106
107static int twl4030_pwmled_enable(struct pwm_chip *chip, struct pwm_device *pwm)
108{
109 struct twl_pwmled_chip *twl = to_twl(chip);
110 int ret;
111 u8 val;
112
113 mutex_lock(&twl->mutex);
114 ret = twl_i2c_read_u8(TWL4030_MODULE_LED, &val, TWL4030_LEDEN_REG);
115 if (ret < 0) {
116 dev_err(pwmchip_parent(chip), "%s: Failed to read LEDEN\n", pwm->label);
117 goto out;
118 }
119
120 val |= TWL4030_LED_TOGGLE(pwm->hwpwm, TWL4030_LED_PINS);
121
122 ret = twl_i2c_write_u8(TWL4030_MODULE_LED, val, TWL4030_LEDEN_REG);
123 if (ret < 0)
124 dev_err(pwmchip_parent(chip), "%s: Failed to enable PWM\n", pwm->label);
125
126out:
127 mutex_unlock(&twl->mutex);
128 return ret;
129}
130
131static void twl4030_pwmled_disable(struct pwm_chip *chip,
132 struct pwm_device *pwm)
133{
134 struct twl_pwmled_chip *twl = to_twl(chip);
135 int ret;
136 u8 val;
137
138 mutex_lock(&twl->mutex);
139 ret = twl_i2c_read_u8(TWL4030_MODULE_LED, &val, TWL4030_LEDEN_REG);
140 if (ret < 0) {
141 dev_err(pwmchip_parent(chip), "%s: Failed to read LEDEN\n", pwm->label);
142 goto out;
143 }
144
145 val &= ~TWL4030_LED_TOGGLE(pwm->hwpwm, TWL4030_LED_PINS);
146
147 ret = twl_i2c_write_u8(TWL4030_MODULE_LED, val, TWL4030_LEDEN_REG);
148 if (ret < 0)
149 dev_err(pwmchip_parent(chip), "%s: Failed to disable PWM\n", pwm->label);
150
151out:
152 mutex_unlock(&twl->mutex);
153}
154
155static int twl4030_pwmled_apply(struct pwm_chip *chip, struct pwm_device *pwm,
156 const struct pwm_state *state)
157{
158 int ret;
159
160 if (state->polarity != PWM_POLARITY_NORMAL)
161 return -EINVAL;
162
163 if (!state->enabled) {
164 if (pwm->state.enabled)
165 twl4030_pwmled_disable(chip, pwm);
166
167 return 0;
168 }
169
170 /*
171 * We cannot skip calling ->config even if state->period ==
172 * pwm->state.period && state->duty_cycle == pwm->state.duty_cycle
173 * because we might have exited early in the last call to
174 * pwm_apply_might_sleep because of !state->enabled and so the two values in
175 * pwm->state might not be configured in hardware.
176 */
177 ret = twl4030_pwmled_config(chip, pwm,
178 state->duty_cycle, state->period);
179 if (ret)
180 return ret;
181
182 if (!pwm->state.enabled)
183 ret = twl4030_pwmled_enable(chip, pwm);
184
185 return ret;
186}
187
188
189static const struct pwm_ops twl4030_pwmled_ops = {
190 .apply = twl4030_pwmled_apply,
191};
192
193static int twl6030_pwmled_config(struct pwm_chip *chip, struct pwm_device *pwm,
194 int duty_ns, int period_ns)
195{
196 int duty_cycle = (duty_ns * TWL6030_LED_MAX) / period_ns;
197 u8 on_time;
198 int ret;
199
200 on_time = duty_cycle & 0xff;
201
202 ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, on_time,
203 TWL6030_LED_PWM_CTRL1);
204 if (ret < 0)
205 dev_err(pwmchip_parent(chip), "%s: Failed to configure PWM\n", pwm->label);
206
207 return ret;
208}
209
210static int twl6030_pwmled_enable(struct pwm_chip *chip, struct pwm_device *pwm)
211{
212 struct twl_pwmled_chip *twl = to_twl(chip);
213 int ret;
214 u8 val;
215
216 mutex_lock(&twl->mutex);
217 ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
218 if (ret < 0) {
219 dev_err(pwmchip_parent(chip), "%s: Failed to read PWM_CTRL2\n",
220 pwm->label);
221 goto out;
222 }
223
224 val &= ~TWL6040_LED_MODE_MASK;
225 val |= TWL6040_LED_MODE_ON;
226
227 ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
228 if (ret < 0)
229 dev_err(pwmchip_parent(chip), "%s: Failed to enable PWM\n", pwm->label);
230
231out:
232 mutex_unlock(&twl->mutex);
233 return ret;
234}
235
236static void twl6030_pwmled_disable(struct pwm_chip *chip,
237 struct pwm_device *pwm)
238{
239 struct twl_pwmled_chip *twl = to_twl(chip);
240 int ret;
241 u8 val;
242
243 mutex_lock(&twl->mutex);
244 ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
245 if (ret < 0) {
246 dev_err(pwmchip_parent(chip), "%s: Failed to read PWM_CTRL2\n",
247 pwm->label);
248 goto out;
249 }
250
251 val &= ~TWL6040_LED_MODE_MASK;
252 val |= TWL6040_LED_MODE_OFF;
253
254 ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
255 if (ret < 0)
256 dev_err(pwmchip_parent(chip), "%s: Failed to disable PWM\n", pwm->label);
257
258out:
259 mutex_unlock(&twl->mutex);
260}
261
262static int twl6030_pwmled_apply(struct pwm_chip *chip, struct pwm_device *pwm,
263 const struct pwm_state *state)
264{
265 int err;
266
267 if (state->polarity != pwm->state.polarity)
268 return -EINVAL;
269
270 if (!state->enabled) {
271 if (pwm->state.enabled)
272 twl6030_pwmled_disable(chip, pwm);
273
274 return 0;
275 }
276
277 err = twl6030_pwmled_config(chip, pwm,
278 state->duty_cycle, state->period);
279 if (err)
280 return err;
281
282 if (!pwm->state.enabled)
283 err = twl6030_pwmled_enable(chip, pwm);
284
285 return err;
286}
287
288static int twl6030_pwmled_request(struct pwm_chip *chip, struct pwm_device *pwm)
289{
290 struct twl_pwmled_chip *twl = to_twl(chip);
291 int ret;
292 u8 val;
293
294 mutex_lock(&twl->mutex);
295 ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
296 if (ret < 0) {
297 dev_err(pwmchip_parent(chip), "%s: Failed to read PWM_CTRL2\n",
298 pwm->label);
299 goto out;
300 }
301
302 val &= ~TWL6040_LED_MODE_MASK;
303 val |= TWL6040_LED_MODE_OFF;
304
305 ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
306 if (ret < 0)
307 dev_err(pwmchip_parent(chip), "%s: Failed to request PWM\n", pwm->label);
308
309out:
310 mutex_unlock(&twl->mutex);
311 return ret;
312}
313
314static void twl6030_pwmled_free(struct pwm_chip *chip, struct pwm_device *pwm)
315{
316 struct twl_pwmled_chip *twl = to_twl(chip);
317 int ret;
318 u8 val;
319
320 mutex_lock(&twl->mutex);
321 ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
322 if (ret < 0) {
323 dev_err(pwmchip_parent(chip), "%s: Failed to read PWM_CTRL2\n",
324 pwm->label);
325 goto out;
326 }
327
328 val &= ~TWL6040_LED_MODE_MASK;
329 val |= TWL6040_LED_MODE_HW;
330
331 ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
332 if (ret < 0)
333 dev_err(pwmchip_parent(chip), "%s: Failed to free PWM\n", pwm->label);
334
335out:
336 mutex_unlock(&twl->mutex);
337}
338
339static const struct pwm_ops twl6030_pwmled_ops = {
340 .apply = twl6030_pwmled_apply,
341 .request = twl6030_pwmled_request,
342 .free = twl6030_pwmled_free,
343};
344
345static int twl_pwmled_probe(struct platform_device *pdev)
346{
347 struct pwm_chip *chip;
348 struct twl_pwmled_chip *twl;
349 unsigned int npwm;
350 const struct pwm_ops *ops;
351
352 if (twl_class_is_4030()) {
353 ops = &twl4030_pwmled_ops;
354 npwm = 2;
355 } else {
356 ops = &twl6030_pwmled_ops;
357 npwm = 1;
358 }
359
360 chip = devm_pwmchip_alloc(&pdev->dev, npwm, sizeof(*twl));
361 if (IS_ERR(chip))
362 return PTR_ERR(chip);
363 twl = to_twl(chip);
364
365 chip->ops = ops;
366
367 mutex_init(&twl->mutex);
368
369 return devm_pwmchip_add(&pdev->dev, chip);
370}
371
372#ifdef CONFIG_OF
373static const struct of_device_id twl_pwmled_of_match[] = {
374 { .compatible = "ti,twl4030-pwmled" },
375 { .compatible = "ti,twl6030-pwmled" },
376 { },
377};
378MODULE_DEVICE_TABLE(of, twl_pwmled_of_match);
379#endif
380
381static struct platform_driver twl_pwmled_driver = {
382 .driver = {
383 .name = "twl-pwmled",
384 .of_match_table = of_match_ptr(twl_pwmled_of_match),
385 },
386 .probe = twl_pwmled_probe,
387};
388module_platform_driver(twl_pwmled_driver);
389
390MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>");
391MODULE_DESCRIPTION("PWM driver for TWL4030 and TWL6030 LED outputs");
392MODULE_ALIAS("platform:twl-pwmled");
393MODULE_LICENSE("GPL");
1/*
2 * Driver for TWL4030/6030 Pulse Width Modulator used as LED driver
3 *
4 * Copyright (C) 2012 Texas Instruments
5 * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
6 *
7 * This driver is a complete rewrite of the former pwm-twl6030.c authorded by:
8 * Hemanth V <hemanthv@ti.com>
9 *
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License version 2 as published by
12 * the Free Software Foundation.
13 *
14 * This program is distributed in the hope that it will be useful, but WITHOUT
15 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
16 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
17 * more details.
18 *
19 * You should have received a copy of the GNU General Public License along with
20 * this program. If not, see <http://www.gnu.org/licenses/>.
21 */
22
23#include <linux/module.h>
24#include <linux/of.h>
25#include <linux/platform_device.h>
26#include <linux/pwm.h>
27#include <linux/i2c/twl.h>
28#include <linux/slab.h>
29
30/*
31 * This driver handles the PWM driven LED terminals of TWL4030 and TWL6030.
32 * To generate the signal on TWL4030:
33 * - LEDA uses PWMA
34 * - LEDB uses PWMB
35 * TWL6030 has one LED pin with dedicated LEDPWM
36 */
37
38#define TWL4030_LED_MAX 0x7f
39#define TWL6030_LED_MAX 0xff
40
41/* Registers, bits and macro for TWL4030 */
42#define TWL4030_LEDEN_REG 0x00
43#define TWL4030_PWMA_REG 0x01
44
45#define TWL4030_LEDXON (1 << 0)
46#define TWL4030_LEDXPWM (1 << 4)
47#define TWL4030_LED_PINS (TWL4030_LEDXON | TWL4030_LEDXPWM)
48#define TWL4030_LED_TOGGLE(led, x) ((x) << (led))
49
50/* Register, bits and macro for TWL6030 */
51#define TWL6030_LED_PWM_CTRL1 0xf4
52#define TWL6030_LED_PWM_CTRL2 0xf5
53
54#define TWL6040_LED_MODE_HW 0x00
55#define TWL6040_LED_MODE_ON 0x01
56#define TWL6040_LED_MODE_OFF 0x02
57#define TWL6040_LED_MODE_MASK 0x03
58
59struct twl_pwmled_chip {
60 struct pwm_chip chip;
61 struct mutex mutex;
62};
63
64static inline struct twl_pwmled_chip *to_twl(struct pwm_chip *chip)
65{
66 return container_of(chip, struct twl_pwmled_chip, chip);
67}
68
69static int twl4030_pwmled_config(struct pwm_chip *chip, struct pwm_device *pwm,
70 int duty_ns, int period_ns)
71{
72 int duty_cycle = DIV_ROUND_UP(duty_ns * TWL4030_LED_MAX, period_ns) + 1;
73 u8 pwm_config[2] = { 1, 0 };
74 int base, ret;
75
76 /*
77 * To configure the duty period:
78 * On-cycle is set to 1 (the minimum allowed value)
79 * The off time of 0 is not configurable, so the mapping is:
80 * 0 -> off cycle = 2,
81 * 1 -> off cycle = 2,
82 * 2 -> off cycle = 3,
83 * 126 - > off cycle 127,
84 * 127 - > off cycle 1
85 * When on cycle == off cycle the PWM will be always on
86 */
87 if (duty_cycle == 1)
88 duty_cycle = 2;
89 else if (duty_cycle > TWL4030_LED_MAX)
90 duty_cycle = 1;
91
92 base = pwm->hwpwm * 2 + TWL4030_PWMA_REG;
93
94 pwm_config[1] = duty_cycle;
95
96 ret = twl_i2c_write(TWL4030_MODULE_LED, pwm_config, base, 2);
97 if (ret < 0)
98 dev_err(chip->dev, "%s: Failed to configure PWM\n", pwm->label);
99
100 return ret;
101}
102
103static int twl4030_pwmled_enable(struct pwm_chip *chip, struct pwm_device *pwm)
104{
105 struct twl_pwmled_chip *twl = to_twl(chip);
106 int ret;
107 u8 val;
108
109 mutex_lock(&twl->mutex);
110 ret = twl_i2c_read_u8(TWL4030_MODULE_LED, &val, TWL4030_LEDEN_REG);
111 if (ret < 0) {
112 dev_err(chip->dev, "%s: Failed to read LEDEN\n", pwm->label);
113 goto out;
114 }
115
116 val |= TWL4030_LED_TOGGLE(pwm->hwpwm, TWL4030_LED_PINS);
117
118 ret = twl_i2c_write_u8(TWL4030_MODULE_LED, val, TWL4030_LEDEN_REG);
119 if (ret < 0)
120 dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label);
121
122out:
123 mutex_unlock(&twl->mutex);
124 return ret;
125}
126
127static void twl4030_pwmled_disable(struct pwm_chip *chip,
128 struct pwm_device *pwm)
129{
130 struct twl_pwmled_chip *twl = to_twl(chip);
131 int ret;
132 u8 val;
133
134 mutex_lock(&twl->mutex);
135 ret = twl_i2c_read_u8(TWL4030_MODULE_LED, &val, TWL4030_LEDEN_REG);
136 if (ret < 0) {
137 dev_err(chip->dev, "%s: Failed to read LEDEN\n", pwm->label);
138 goto out;
139 }
140
141 val &= ~TWL4030_LED_TOGGLE(pwm->hwpwm, TWL4030_LED_PINS);
142
143 ret = twl_i2c_write_u8(TWL4030_MODULE_LED, val, TWL4030_LEDEN_REG);
144 if (ret < 0)
145 dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
146
147out:
148 mutex_unlock(&twl->mutex);
149}
150
151static int twl6030_pwmled_config(struct pwm_chip *chip, struct pwm_device *pwm,
152 int duty_ns, int period_ns)
153{
154 int duty_cycle = (duty_ns * TWL6030_LED_MAX) / period_ns;
155 u8 on_time;
156 int ret;
157
158 on_time = duty_cycle & 0xff;
159
160 ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, on_time,
161 TWL6030_LED_PWM_CTRL1);
162 if (ret < 0)
163 dev_err(chip->dev, "%s: Failed to configure PWM\n", pwm->label);
164
165 return ret;
166}
167
168static int twl6030_pwmled_enable(struct pwm_chip *chip, struct pwm_device *pwm)
169{
170 struct twl_pwmled_chip *twl = to_twl(chip);
171 int ret;
172 u8 val;
173
174 mutex_lock(&twl->mutex);
175 ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
176 if (ret < 0) {
177 dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n",
178 pwm->label);
179 goto out;
180 }
181
182 val &= ~TWL6040_LED_MODE_MASK;
183 val |= TWL6040_LED_MODE_ON;
184
185 ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
186 if (ret < 0)
187 dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label);
188
189out:
190 mutex_unlock(&twl->mutex);
191 return ret;
192}
193
194static void twl6030_pwmled_disable(struct pwm_chip *chip,
195 struct pwm_device *pwm)
196{
197 struct twl_pwmled_chip *twl = to_twl(chip);
198 int ret;
199 u8 val;
200
201 mutex_lock(&twl->mutex);
202 ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
203 if (ret < 0) {
204 dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n",
205 pwm->label);
206 goto out;
207 }
208
209 val &= ~TWL6040_LED_MODE_MASK;
210 val |= TWL6040_LED_MODE_OFF;
211
212 ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
213 if (ret < 0)
214 dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
215
216out:
217 mutex_unlock(&twl->mutex);
218}
219
220static int twl6030_pwmled_request(struct pwm_chip *chip, struct pwm_device *pwm)
221{
222 struct twl_pwmled_chip *twl = to_twl(chip);
223 int ret;
224 u8 val;
225
226 mutex_lock(&twl->mutex);
227 ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
228 if (ret < 0) {
229 dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n",
230 pwm->label);
231 goto out;
232 }
233
234 val &= ~TWL6040_LED_MODE_MASK;
235 val |= TWL6040_LED_MODE_OFF;
236
237 ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
238 if (ret < 0)
239 dev_err(chip->dev, "%s: Failed to request PWM\n", pwm->label);
240
241out:
242 mutex_unlock(&twl->mutex);
243 return ret;
244}
245
246static void twl6030_pwmled_free(struct pwm_chip *chip, struct pwm_device *pwm)
247{
248 struct twl_pwmled_chip *twl = to_twl(chip);
249 int ret;
250 u8 val;
251
252 mutex_lock(&twl->mutex);
253 ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
254 if (ret < 0) {
255 dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n",
256 pwm->label);
257 goto out;
258 }
259
260 val &= ~TWL6040_LED_MODE_MASK;
261 val |= TWL6040_LED_MODE_HW;
262
263 ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
264 if (ret < 0)
265 dev_err(chip->dev, "%s: Failed to free PWM\n", pwm->label);
266
267out:
268 mutex_unlock(&twl->mutex);
269}
270
271static const struct pwm_ops twl4030_pwmled_ops = {
272 .enable = twl4030_pwmled_enable,
273 .disable = twl4030_pwmled_disable,
274 .config = twl4030_pwmled_config,
275 .owner = THIS_MODULE,
276};
277
278static const struct pwm_ops twl6030_pwmled_ops = {
279 .enable = twl6030_pwmled_enable,
280 .disable = twl6030_pwmled_disable,
281 .config = twl6030_pwmled_config,
282 .request = twl6030_pwmled_request,
283 .free = twl6030_pwmled_free,
284 .owner = THIS_MODULE,
285};
286
287static int twl_pwmled_probe(struct platform_device *pdev)
288{
289 struct twl_pwmled_chip *twl;
290 int ret;
291
292 twl = devm_kzalloc(&pdev->dev, sizeof(*twl), GFP_KERNEL);
293 if (!twl)
294 return -ENOMEM;
295
296 if (twl_class_is_4030()) {
297 twl->chip.ops = &twl4030_pwmled_ops;
298 twl->chip.npwm = 2;
299 } else {
300 twl->chip.ops = &twl6030_pwmled_ops;
301 twl->chip.npwm = 1;
302 }
303
304 twl->chip.dev = &pdev->dev;
305 twl->chip.base = -1;
306 twl->chip.can_sleep = true;
307
308 mutex_init(&twl->mutex);
309
310 ret = pwmchip_add(&twl->chip);
311 if (ret < 0)
312 return ret;
313
314 platform_set_drvdata(pdev, twl);
315
316 return 0;
317}
318
319static int twl_pwmled_remove(struct platform_device *pdev)
320{
321 struct twl_pwmled_chip *twl = platform_get_drvdata(pdev);
322
323 return pwmchip_remove(&twl->chip);
324}
325
326#ifdef CONFIG_OF
327static const struct of_device_id twl_pwmled_of_match[] = {
328 { .compatible = "ti,twl4030-pwmled" },
329 { .compatible = "ti,twl6030-pwmled" },
330 { },
331};
332MODULE_DEVICE_TABLE(of, twl_pwmled_of_match);
333#endif
334
335static struct platform_driver twl_pwmled_driver = {
336 .driver = {
337 .name = "twl-pwmled",
338 .of_match_table = of_match_ptr(twl_pwmled_of_match),
339 },
340 .probe = twl_pwmled_probe,
341 .remove = twl_pwmled_remove,
342};
343module_platform_driver(twl_pwmled_driver);
344
345MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>");
346MODULE_DESCRIPTION("PWM driver for TWL4030 and TWL6030 LED outputs");
347MODULE_ALIAS("platform:twl-pwmled");
348MODULE_LICENSE("GPL");