1// SPDX-License-Identifier: GPL-2.0-or-later
   2/*
   3 *  it87.c - Part of lm_sensors, Linux kernel modules for hardware
   4 *           monitoring.
   5 *
   6 *  The IT8705F is an LPC-based Super I/O part that contains UARTs, a
   7 *  parallel port, an IR port, a MIDI port, a floppy controller, etc., in
   8 *  addition to an Environment Controller (Enhanced Hardware Monitor and
   9 *  Fan Controller)
  10 *
  11 *  This driver supports only the Environment Controller in the IT8705F and
  12 *  similar parts.  The other devices are supported by different drivers.
  13 *
  14 *  Supports: IT8603E  Super I/O chip w/LPC interface
  15 *            IT8620E  Super I/O chip w/LPC interface
  16 *            IT8622E  Super I/O chip w/LPC interface
  17 *            IT8623E  Super I/O chip w/LPC interface
  18 *            IT8628E  Super I/O chip w/LPC interface
  19 *            IT8705F  Super I/O chip w/LPC interface
  20 *            IT8712F  Super I/O chip w/LPC interface
  21 *            IT8716F  Super I/O chip w/LPC interface
  22 *            IT8718F  Super I/O chip w/LPC interface
  23 *            IT8720F  Super I/O chip w/LPC interface
  24 *            IT8721F  Super I/O chip w/LPC interface
  25 *            IT8726F  Super I/O chip w/LPC interface
  26 *            IT8728F  Super I/O chip w/LPC interface
  27 *            IT8732F  Super I/O chip w/LPC interface
  28 *            IT8758E  Super I/O chip w/LPC interface
  29 *            IT8771E  Super I/O chip w/LPC interface
  30 *            IT8772E  Super I/O chip w/LPC interface
  31 *            IT8781F  Super I/O chip w/LPC interface
  32 *            IT8782F  Super I/O chip w/LPC interface
  33 *            IT8783E/F Super I/O chip w/LPC interface
  34 *            IT8786E  Super I/O chip w/LPC interface
  35 *            IT8790E  Super I/O chip w/LPC interface
  36 *            IT8792E  Super I/O chip w/LPC interface
  37 *            IT87952E  Super I/O chip w/LPC interface
  38 *            Sis950   A clone of the IT8705F
  39 *
  40 *  Copyright (C) 2001 Chris Gauthron
  41 *  Copyright (C) 2005-2010 Jean Delvare <jdelvare@suse.de>
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  42 */
  43
  44#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  45
  46#include <linux/bitops.h>
  47#include <linux/module.h>
  48#include <linux/init.h>
  49#include <linux/slab.h>
  50#include <linux/jiffies.h>
  51#include <linux/platform_device.h>
  52#include <linux/hwmon.h>
  53#include <linux/hwmon-sysfs.h>
  54#include <linux/hwmon-vid.h>
  55#include <linux/err.h>
  56#include <linux/mutex.h>
  57#include <linux/sysfs.h>
  58#include <linux/string.h>
  59#include <linux/dmi.h>
  60#include <linux/acpi.h>
  61#include <linux/io.h>
  62
  63#define DRVNAME "it87"
  64
  65enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728, it8732,
  66	     it8771, it8772, it8781, it8782, it8783, it8786, it8790,
  67	     it8792, it8603, it8620, it8622, it8628, it87952 };
  68
  69static struct platform_device *it87_pdev[2];
 
 
  70
  71#define	REG_2E	0x2e	/* The register to read/write */
  72#define	REG_4E	0x4e	/* Secondary register to read/write */
  73
 
  74#define	DEV	0x07	/* Register: Logical device select */
 
  75#define PME	0x04	/* The device with the fan registers in it */
  76
  77/* The device with the IT8718F/IT8720F VID value in it */
  78#define GPIO	0x07
  79
  80#define	DEVID	0x20	/* Register: Device ID */
  81#define	DEVREV	0x22	/* Register: Device Revision */
  82
  83static inline void __superio_enter(int ioreg)
  84{
  85	outb(0x87, ioreg);
  86	outb(0x01, ioreg);
  87	outb(0x55, ioreg);
  88	outb(ioreg == REG_4E ? 0xaa : 0x55, ioreg);
  89}
  90
  91static inline int superio_inb(int ioreg, int reg)
  92{
  93	outb(reg, ioreg);
  94	return inb(ioreg + 1);
  95}
  96
  97static inline void superio_outb(int ioreg, int reg, int val)
  98{
  99	outb(reg, ioreg);
 100	outb(val, ioreg + 1);
 101}
 102
 103static int superio_inw(int ioreg, int reg)
 104{
 105	int val;
 106
 107	outb(reg++, ioreg);
 108	val = inb(ioreg + 1) << 8;
 109	outb(reg, ioreg);
 110	val |= inb(ioreg + 1);
 111	return val;
 112}
 113
 114static inline void superio_select(int ioreg, int ldn)
 115{
 116	outb(DEV, ioreg);
 117	outb(ldn, ioreg + 1);
 118}
 119
 120static inline int superio_enter(int ioreg, bool noentry)
 121{
 122	/*
 123	 * Try to reserve ioreg and ioreg + 1 for exclusive access.
 124	 */
 125	if (!request_muxed_region(ioreg, 2, DRVNAME))
 126		return -EBUSY;
 127
 128	if (!noentry)
 129		__superio_enter(ioreg);
 
 
 130	return 0;
 131}
 132
 133static inline void superio_exit(int ioreg, bool noexit)
 134{
 135	if (!noexit) {
 136		outb(0x02, ioreg);
 137		outb(0x02, ioreg + 1);
 138	}
 139	release_region(ioreg, 2);
 140}
 141
 142/* Logical device 4 registers */
 143#define IT8712F_DEVID 0x8712
 144#define IT8705F_DEVID 0x8705
 145#define IT8716F_DEVID 0x8716
 146#define IT8718F_DEVID 0x8718
 147#define IT8720F_DEVID 0x8720
 148#define IT8721F_DEVID 0x8721
 149#define IT8726F_DEVID 0x8726
 150#define IT8728F_DEVID 0x8728
 151#define IT8732F_DEVID 0x8732
 152#define IT8792E_DEVID 0x8733
 153#define IT8771E_DEVID 0x8771
 154#define IT8772E_DEVID 0x8772
 155#define IT8781F_DEVID 0x8781
 156#define IT8782F_DEVID 0x8782
 157#define IT8783E_DEVID 0x8783
 158#define IT8786E_DEVID 0x8786
 159#define IT8790E_DEVID 0x8790
 160#define IT8603E_DEVID 0x8603
 161#define IT8620E_DEVID 0x8620
 162#define IT8622E_DEVID 0x8622
 163#define IT8623E_DEVID 0x8623
 164#define IT8628E_DEVID 0x8628
 165#define IT87952E_DEVID 0x8695
 166
 167/* Logical device 4 (Environmental Monitor) registers */
 168#define IT87_ACT_REG	0x30
 169#define IT87_BASE_REG	0x60
 170#define IT87_SPECIAL_CFG_REG	0xf3	/* special configuration register */
 171
 172/* Logical device 7 registers (IT8712F and later) */
 173#define IT87_SIO_GPIO1_REG	0x25
 174#define IT87_SIO_GPIO2_REG	0x26
 175#define IT87_SIO_GPIO3_REG	0x27
 176#define IT87_SIO_GPIO4_REG	0x28
 177#define IT87_SIO_GPIO5_REG	0x29
 178#define IT87_SIO_PINX1_REG	0x2a	/* Pin selection */
 179#define IT87_SIO_PINX2_REG	0x2c	/* Pin selection */
 180#define IT87_SIO_SPI_REG	0xef	/* SPI function pin select */
 181#define IT87_SIO_VID_REG	0xfc	/* VID value */
 182#define IT87_SIO_BEEP_PIN_REG	0xf6	/* Beep pin mapping */
 183
 184/* Force chip IDs to specified values. Should only be used for testing */
 185static unsigned short force_id[2];
 186static unsigned int force_id_cnt;
 187
 188/* ACPI resource conflicts are ignored if this parameter is set to 1 */
 189static bool ignore_resource_conflict;
 190
 191/* Update battery voltage after every reading if true */
 192static bool update_vbat;
 193
 194/* Not all BIOSes properly configure the PWM registers */
 195static bool fix_pwm_polarity;
 196
 197/* Many IT87 constants specified below */
 198
 199/* Length of ISA address segment */
 200#define IT87_EXTENT 8
 201
 202/* Length of ISA address segment for Environmental Controller */
 203#define IT87_EC_EXTENT 2
 204
 205/* Offset of EC registers from ISA base address */
 206#define IT87_EC_OFFSET 5
 207
 208/* Where are the ISA address/data registers relative to the EC base address */
 209#define IT87_ADDR_REG_OFFSET 0
 210#define IT87_DATA_REG_OFFSET 1
 211
 212/*----- The IT87 registers -----*/
 213
 214#define IT87_REG_CONFIG        0x00
 215
 216#define IT87_REG_ALARM1        0x01
 217#define IT87_REG_ALARM2        0x02
 218#define IT87_REG_ALARM3        0x03
 219
 220/*
 221 * The IT8718F and IT8720F have the VID value in a different register, in
 222 * Super-I/O configuration space.
 223 */
 224#define IT87_REG_VID           0x0a
 225
 226/* Interface Selection register on other chips */
 227#define IT87_REG_IFSEL         0x0a
 228
 229/*
 230 * The IT8705F and IT8712F earlier than revision 0x08 use register 0x0b
 231 * for fan divisors. Later IT8712F revisions must use 16-bit tachometer
 232 * mode.
 233 */
 234#define IT87_REG_FAN_DIV       0x0b
 235#define IT87_REG_FAN_16BIT     0x0c
 236
 237/*
 238 * Monitors:
 239 * - up to 13 voltage (0 to 7, battery, avcc, 10 to 12)
 240 * - up to 6 temp (1 to 6)
 241 * - up to 6 fan (1 to 6)
 242 */
 243
 244static const u8 IT87_REG_FAN[]         = { 0x0d, 0x0e, 0x0f, 0x80, 0x82, 0x4c };
 245static const u8 IT87_REG_FAN_MIN[]     = { 0x10, 0x11, 0x12, 0x84, 0x86, 0x4e };
 246static const u8 IT87_REG_FANX[]        = { 0x18, 0x19, 0x1a, 0x81, 0x83, 0x4d };
 247static const u8 IT87_REG_FANX_MIN[]    = { 0x1b, 0x1c, 0x1d, 0x85, 0x87, 0x4f };
 248static const u8 IT87_REG_TEMP_OFFSET[] = { 0x56, 0x57, 0x59 };
 249
 250#define IT87_REG_FAN_MAIN_CTRL 0x13
 251#define IT87_REG_FAN_CTL       0x14
 252static const u8 IT87_REG_PWM[]         = { 0x15, 0x16, 0x17, 0x7f, 0xa7, 0xaf };
 253static const u8 IT87_REG_PWM_DUTY[]    = { 0x63, 0x6b, 0x73, 0x7b, 0xa3, 0xab };
 254
 255static const u8 IT87_REG_VIN[]	= { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26,
 256				    0x27, 0x28, 0x2f, 0x2c, 0x2d, 0x2e };
 257
 
 258#define IT87_REG_TEMP(nr)      (0x29 + (nr))
 259
 260#define IT87_REG_VIN_MAX(nr)   (0x30 + (nr) * 2)
 261#define IT87_REG_VIN_MIN(nr)   (0x31 + (nr) * 2)
 262#define IT87_REG_TEMP_HIGH(nr) (0x40 + (nr) * 2)
 263#define IT87_REG_TEMP_LOW(nr)  (0x41 + (nr) * 2)
 264
 265#define IT87_REG_VIN_ENABLE    0x50
 266#define IT87_REG_TEMP_ENABLE   0x51
 267#define IT87_REG_TEMP_EXTRA    0x55
 268#define IT87_REG_BEEP_ENABLE   0x5c
 269
 270#define IT87_REG_CHIPID        0x58
 271
 272static const u8 IT87_REG_AUTO_BASE[] = { 0x60, 0x68, 0x70, 0x78, 0xa0, 0xa8 };
 273
 274#define IT87_REG_AUTO_TEMP(nr, i) (IT87_REG_AUTO_BASE[nr] + (i))
 275#define IT87_REG_AUTO_PWM(nr, i)  (IT87_REG_AUTO_BASE[nr] + 5 + (i))
 276
 277#define IT87_REG_TEMP456_ENABLE	0x77
 278
 279#define NUM_VIN			ARRAY_SIZE(IT87_REG_VIN)
 280#define NUM_VIN_LIMIT		8
 281#define NUM_TEMP		6
 282#define NUM_TEMP_OFFSET		ARRAY_SIZE(IT87_REG_TEMP_OFFSET)
 283#define NUM_TEMP_LIMIT		3
 284#define NUM_FAN			ARRAY_SIZE(IT87_REG_FAN)
 285#define NUM_FAN_DIV		3
 286#define NUM_PWM			ARRAY_SIZE(IT87_REG_PWM)
 287#define NUM_AUTO_PWM		ARRAY_SIZE(IT87_REG_PWM)
 288
 289struct it87_devices {
 290	const char *name;
 291	const char * const model;
 292	u32 features;
 293	u8 peci_mask;
 294	u8 old_peci_mask;
 295	u8 smbus_bitmap;	/* SMBus enable bits in extra config register */
 296	u8 ec_special_config;
 297};
 298
 299#define FEAT_12MV_ADC		BIT(0)
 300#define FEAT_NEWER_AUTOPWM	BIT(1)
 301#define FEAT_OLD_AUTOPWM	BIT(2)
 302#define FEAT_16BIT_FANS		BIT(3)
 303#define FEAT_TEMP_OFFSET	BIT(4)
 304#define FEAT_TEMP_PECI		BIT(5)
 305#define FEAT_TEMP_OLD_PECI	BIT(6)
 306#define FEAT_FAN16_CONFIG	BIT(7)	/* Need to enable 16-bit fans */
 307#define FEAT_FIVE_FANS		BIT(8)	/* Supports five fans */
 308#define FEAT_VID		BIT(9)	/* Set if chip supports VID */
 309#define FEAT_IN7_INTERNAL	BIT(10)	/* Set if in7 is internal */
 310#define FEAT_SIX_FANS		BIT(11)	/* Supports six fans */
 311#define FEAT_10_9MV_ADC		BIT(12)
 312#define FEAT_AVCC3		BIT(13)	/* Chip supports in9/AVCC3 */
 313#define FEAT_FIVE_PWM		BIT(14)	/* Chip supports 5 pwm chn */
 314#define FEAT_SIX_PWM		BIT(15)	/* Chip supports 6 pwm chn */
 315#define FEAT_PWM_FREQ2		BIT(16)	/* Separate pwm freq 2 */
 316#define FEAT_SIX_TEMP		BIT(17)	/* Up to 6 temp sensors */
 317#define FEAT_VIN3_5V		BIT(18)	/* VIN3 connected to +5V */
 318/*
 319 * Disabling configuration mode on some chips can result in system
 320 * hang-ups and access failures to the Super-IO chip at the
 321 * second SIO address. Never exit configuration mode on these
 322 * chips to avoid the problem.
 323 */
 324#define FEAT_NOCONF		BIT(19)	/* Chip conf mode enabled on startup */
 325#define FEAT_FOUR_FANS		BIT(20)	/* Supports four fans */
 326#define FEAT_FOUR_PWM		BIT(21)	/* Supports four fan controls */
 327#define FEAT_FOUR_TEMP		BIT(22)
 328#define FEAT_FANCTL_ONOFF	BIT(23)	/* chip has FAN_CTL ON/OFF */
 329
 330static const struct it87_devices it87_devices[] = {
 331	[it87] = {
 332		.name = "it87",
 333		.model = "IT87F",
 334		.features = FEAT_OLD_AUTOPWM | FEAT_FANCTL_ONOFF,
 335		/* may need to overwrite */
 336	},
 337	[it8712] = {
 338		.name = "it8712",
 339		.model = "IT8712F",
 340		.features = FEAT_OLD_AUTOPWM | FEAT_VID | FEAT_FANCTL_ONOFF,
 341		/* may need to overwrite */
 342	},
 343	[it8716] = {
 344		.name = "it8716",
 345		.model = "IT8716F",
 346		.features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET | FEAT_VID
 347		  | FEAT_FAN16_CONFIG | FEAT_FIVE_FANS | FEAT_PWM_FREQ2
 348		  | FEAT_FANCTL_ONOFF,
 349	},
 350	[it8718] = {
 351		.name = "it8718",
 352		.model = "IT8718F",
 353		.features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET | FEAT_VID
 354		  | FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG | FEAT_FIVE_FANS
 355		  | FEAT_PWM_FREQ2 | FEAT_FANCTL_ONOFF,
 356		.old_peci_mask = 0x4,
 357	},
 358	[it8720] = {
 359		.name = "it8720",
 360		.model = "IT8720F",
 361		.features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET | FEAT_VID
 362		  | FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG | FEAT_FIVE_FANS
 363		  | FEAT_PWM_FREQ2 | FEAT_FANCTL_ONOFF,
 364		.old_peci_mask = 0x4,
 365	},
 366	[it8721] = {
 367		.name = "it8721",
 368		.model = "IT8721F",
 369		.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
 370		  | FEAT_TEMP_OFFSET | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI
 371		  | FEAT_FAN16_CONFIG | FEAT_FIVE_FANS | FEAT_IN7_INTERNAL
 372		  | FEAT_PWM_FREQ2 | FEAT_FANCTL_ONOFF,
 373		.peci_mask = 0x05,
 374		.old_peci_mask = 0x02,	/* Actually reports PCH */
 375	},
 376	[it8728] = {
 377		.name = "it8728",
 378		.model = "IT8728F",
 379		.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
 380		  | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_FIVE_FANS
 381		  | FEAT_IN7_INTERNAL | FEAT_PWM_FREQ2
 382		  | FEAT_FANCTL_ONOFF,
 383		.peci_mask = 0x07,
 384	},
 385	[it8732] = {
 386		.name = "it8732",
 387		.model = "IT8732F",
 388		.features = FEAT_NEWER_AUTOPWM | FEAT_16BIT_FANS
 389		  | FEAT_TEMP_OFFSET | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI
 390		  | FEAT_10_9MV_ADC | FEAT_IN7_INTERNAL | FEAT_FOUR_FANS
 391		  | FEAT_FOUR_PWM | FEAT_FANCTL_ONOFF,
 392		.peci_mask = 0x07,
 393		.old_peci_mask = 0x02,	/* Actually reports PCH */
 394	},
 395	[it8771] = {
 396		.name = "it8771",
 397		.model = "IT8771E",
 398		.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
 399		  | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL
 400		  | FEAT_PWM_FREQ2 | FEAT_FANCTL_ONOFF,
 401				/* PECI: guesswork */
 402				/* 12mV ADC (OHM) */
 403				/* 16 bit fans (OHM) */
 404				/* three fans, always 16 bit (guesswork) */
 405		.peci_mask = 0x07,
 406	},
 407	[it8772] = {
 408		.name = "it8772",
 409		.model = "IT8772E",
 410		.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
 411		  | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL
 412		  | FEAT_PWM_FREQ2 | FEAT_FANCTL_ONOFF,
 413				/* PECI (coreboot) */
 414				/* 12mV ADC (HWSensors4, OHM) */
 415				/* 16 bit fans (HWSensors4, OHM) */
 416				/* three fans, always 16 bit (datasheet) */
 417		.peci_mask = 0x07,
 418	},
 419	[it8781] = {
 420		.name = "it8781",
 421		.model = "IT8781F",
 422		.features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET
 423		  | FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG | FEAT_PWM_FREQ2
 424		  | FEAT_FANCTL_ONOFF,
 425		.old_peci_mask = 0x4,
 426	},
 427	[it8782] = {
 428		.name = "it8782",
 429		.model = "IT8782F",
 430		.features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET
 431		  | FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG | FEAT_PWM_FREQ2
 432		  | FEAT_FANCTL_ONOFF,
 433		.old_peci_mask = 0x4,
 434	},
 435	[it8783] = {
 436		.name = "it8783",
 437		.model = "IT8783E/F",
 438		.features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET
 439		  | FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG | FEAT_PWM_FREQ2
 440		  | FEAT_FANCTL_ONOFF,
 441		.old_peci_mask = 0x4,
 442	},
 443	[it8786] = {
 444		.name = "it8786",
 445		.model = "IT8786E",
 446		.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
 447		  | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL
 448		  | FEAT_PWM_FREQ2 | FEAT_FANCTL_ONOFF,
 449		.peci_mask = 0x07,
 450	},
 451	[it8790] = {
 452		.name = "it8790",
 453		.model = "IT8790E",
 454		.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
 455		  | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL
 456		  | FEAT_PWM_FREQ2 | FEAT_FANCTL_ONOFF | FEAT_NOCONF,
 457		.peci_mask = 0x07,
 458	},
 459	[it8792] = {
 460		.name = "it8792",
 461		.model = "IT8792E/IT8795E",
 462		.features = FEAT_NEWER_AUTOPWM | FEAT_16BIT_FANS
 463		  | FEAT_TEMP_OFFSET | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI
 464		  | FEAT_10_9MV_ADC | FEAT_IN7_INTERNAL | FEAT_FANCTL_ONOFF
 465		  | FEAT_NOCONF,
 466		.peci_mask = 0x07,
 467		.old_peci_mask = 0x02,	/* Actually reports PCH */
 468	},
 469	[it8603] = {
 470		.name = "it8603",
 471		.model = "IT8603E",
 472		.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
 473		  | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL
 474		  | FEAT_AVCC3 | FEAT_PWM_FREQ2,
 475		.peci_mask = 0x07,
 476	},
 477	[it8620] = {
 478		.name = "it8620",
 479		.model = "IT8620E",
 480		.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
 481		  | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_SIX_FANS
 482		  | FEAT_IN7_INTERNAL | FEAT_SIX_PWM | FEAT_PWM_FREQ2
 483		  | FEAT_SIX_TEMP | FEAT_VIN3_5V | FEAT_FANCTL_ONOFF,
 484		.peci_mask = 0x07,
 485	},
 486	[it8622] = {
 487		.name = "it8622",
 488		.model = "IT8622E",
 489		.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
 490		  | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_FIVE_FANS
 491		  | FEAT_FIVE_PWM | FEAT_IN7_INTERNAL | FEAT_PWM_FREQ2
 492		  | FEAT_AVCC3 | FEAT_VIN3_5V | FEAT_FOUR_TEMP,
 493		.peci_mask = 0x07,
 494		.smbus_bitmap = BIT(1) | BIT(2),
 495	},
 496	[it8628] = {
 497		.name = "it8628",
 498		.model = "IT8628E",
 499		.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
 500		  | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_SIX_FANS
 501		  | FEAT_IN7_INTERNAL | FEAT_SIX_PWM | FEAT_PWM_FREQ2
 502		  | FEAT_SIX_TEMP | FEAT_VIN3_5V | FEAT_FANCTL_ONOFF,
 503		.peci_mask = 0x07,
 504	},
 505	[it87952] = {
 506		.name = "it87952",
 507		.model = "IT87952E",
 508		.features = FEAT_NEWER_AUTOPWM | FEAT_16BIT_FANS
 509		  | FEAT_TEMP_OFFSET | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI
 510		  | FEAT_10_9MV_ADC | FEAT_IN7_INTERNAL | FEAT_FANCTL_ONOFF
 511		  | FEAT_NOCONF,
 512		.peci_mask = 0x07,
 513		.old_peci_mask = 0x02,	/* Actually reports PCH */
 514	},
 515};
 516
 517#define has_16bit_fans(data)	((data)->features & FEAT_16BIT_FANS)
 518#define has_12mv_adc(data)	((data)->features & FEAT_12MV_ADC)
 519#define has_10_9mv_adc(data)	((data)->features & FEAT_10_9MV_ADC)
 520#define has_newer_autopwm(data)	((data)->features & FEAT_NEWER_AUTOPWM)
 521#define has_old_autopwm(data)	((data)->features & FEAT_OLD_AUTOPWM)
 522#define has_temp_offset(data)	((data)->features & FEAT_TEMP_OFFSET)
 523#define has_temp_peci(data, nr)	(((data)->features & FEAT_TEMP_PECI) && \
 524				 ((data)->peci_mask & BIT(nr)))
 525#define has_temp_old_peci(data, nr) \
 526				(((data)->features & FEAT_TEMP_OLD_PECI) && \
 527				 ((data)->old_peci_mask & BIT(nr)))
 528#define has_fan16_config(data)	((data)->features & FEAT_FAN16_CONFIG)
 529#define has_four_fans(data)	((data)->features & (FEAT_FOUR_FANS | \
 530						     FEAT_FIVE_FANS | \
 531						     FEAT_SIX_FANS))
 532#define has_five_fans(data)	((data)->features & (FEAT_FIVE_FANS | \
 533						     FEAT_SIX_FANS))
 534#define has_six_fans(data)	((data)->features & FEAT_SIX_FANS)
 535#define has_vid(data)		((data)->features & FEAT_VID)
 536#define has_in7_internal(data)	((data)->features & FEAT_IN7_INTERNAL)
 537#define has_avcc3(data)		((data)->features & FEAT_AVCC3)
 538#define has_four_pwm(data)	((data)->features & (FEAT_FOUR_PWM | \
 539						     FEAT_FIVE_PWM | \
 540						     FEAT_SIX_PWM))
 541#define has_five_pwm(data)	((data)->features & (FEAT_FIVE_PWM | \
 542						     FEAT_SIX_PWM))
 543#define has_six_pwm(data)	((data)->features & FEAT_SIX_PWM)
 544#define has_pwm_freq2(data)	((data)->features & FEAT_PWM_FREQ2)
 545#define has_four_temp(data)	((data)->features & FEAT_FOUR_TEMP)
 546#define has_six_temp(data)	((data)->features & FEAT_SIX_TEMP)
 547#define has_vin3_5v(data)	((data)->features & FEAT_VIN3_5V)
 548#define has_noconf(data)	((data)->features & FEAT_NOCONF)
 549#define has_scaling(data)	((data)->features & (FEAT_12MV_ADC | \
 550						     FEAT_10_9MV_ADC))
 551#define has_fanctl_onoff(data)	((data)->features & FEAT_FANCTL_ONOFF)
 552
 553struct it87_sio_data {
 554	int sioaddr;
 555	enum chips type;
 556	/* Values read from Super-I/O config space */
 557	u8 revision;
 558	u8 vid_value;
 559	u8 beep_pin;
 560	u8 internal;	/* Internal sensors can be labeled */
 561	bool need_in7_reroute;
 562	/* Features skipped based on config or DMI */
 563	u16 skip_in;
 564	u8 skip_vid;
 565	u8 skip_fan;
 566	u8 skip_pwm;
 567	u8 skip_temp;
 568	u8 smbus_bitmap;
 569	u8 ec_special_config;
 570};
 571
 572/*
 573 * For each registered chip, we need to keep some data in memory.
 574 * The structure is dynamically allocated.
 575 */
 576struct it87_data {
 577	const struct attribute_group *groups[7];
 578	int sioaddr;
 579	enum chips type;
 580	u32 features;
 581	u8 peci_mask;
 582	u8 old_peci_mask;
 583
 584	u8 smbus_bitmap;	/* !=0 if SMBus needs to be disabled */
 585	u8 ec_special_config;	/* EC special config register restore value */
 586
 587	unsigned short addr;
 588	const char *name;
 589	struct mutex update_lock;
 590	bool valid;		/* true if following fields are valid */
 591	unsigned long last_updated;	/* In jiffies */
 592
 593	u16 in_scaled;		/* Internal voltage sensors are scaled */
 594	u16 in_internal;	/* Bitfield, internal sensors (for labels) */
 595	u16 has_in;		/* Bitfield, voltage sensors enabled */
 596	u8 in[NUM_VIN][3];		/* [nr][0]=in, [1]=min, [2]=max */
 597	bool need_in7_reroute;
 598	u8 has_fan;		/* Bitfield, fans enabled */
 599	u16 fan[NUM_FAN][2];	/* Register values, [nr][0]=fan, [1]=min */
 600	u8 has_temp;		/* Bitfield, temp sensors enabled */
 601	s8 temp[NUM_TEMP][4];	/* [nr][0]=temp, [1]=min, [2]=max, [3]=offset */
 602	u8 sensor;		/* Register value (IT87_REG_TEMP_ENABLE) */
 603	u8 extra;		/* Register value (IT87_REG_TEMP_EXTRA) */
 604	u8 fan_div[NUM_FAN_DIV];/* Register encoding, shifted right */
 605	bool has_vid;		/* True if VID supported */
 606	u8 vid;			/* Register encoding, combined */
 607	u8 vrm;
 608	u32 alarms;		/* Register encoding, combined */
 609	bool has_beep;		/* true if beep supported */
 610	u8 beeps;		/* Register encoding */
 611	u8 fan_main_ctrl;	/* Register value */
 612	u8 fan_ctl;		/* Register value */
 613
 614	/*
 615	 * The following 3 arrays correspond to the same registers up to
 616	 * the IT8720F. The meaning of bits 6-0 depends on the value of bit
 617	 * 7, and we want to preserve settings on mode changes, so we have
 618	 * to track all values separately.
 619	 * Starting with the IT8721F, the manual PWM duty cycles are stored
 620	 * in separate registers (8-bit values), so the separate tracking
 621	 * is no longer needed, but it is still done to keep the driver
 622	 * simple.
 623	 */
 624	u8 has_pwm;		/* Bitfield, pwm control enabled */
 625	u8 pwm_ctrl[NUM_PWM];	/* Register value */
 626	u8 pwm_duty[NUM_PWM];	/* Manual PWM value set by user */
 627	u8 pwm_temp_map[NUM_PWM];/* PWM to temp. chan. mapping (bits 1-0) */
 628
 629	/* Automatic fan speed control registers */
 630	u8 auto_pwm[NUM_AUTO_PWM][4];	/* [nr][3] is hard-coded */
 631	s8 auto_temp[NUM_AUTO_PWM][5];	/* [nr][0] is point1_temp_hyst */
 632};
 633
 634/* Board specific settings from DMI matching */
 635struct it87_dmi_data {
 636	u8 skip_pwm;		/* pwm channels to skip for this board  */
 637};
 638
 639/* Global for results from DMI matching, if needed */
 640static struct it87_dmi_data *dmi_data;
 641
 642static int adc_lsb(const struct it87_data *data, int nr)
 643{
 644	int lsb;
 645
 646	if (has_12mv_adc(data))
 647		lsb = 120;
 648	else if (has_10_9mv_adc(data))
 649		lsb = 109;
 650	else
 651		lsb = 160;
 652	if (data->in_scaled & BIT(nr))
 653		lsb <<= 1;
 654	return lsb;
 655}
 656
 657static u8 in_to_reg(const struct it87_data *data, int nr, long val)
 658{
 659	val = DIV_ROUND_CLOSEST(val * 10, adc_lsb(data, nr));
 660	return clamp_val(val, 0, 255);
 661}
 662
 663static int in_from_reg(const struct it87_data *data, int nr, int val)
 664{
 665	return DIV_ROUND_CLOSEST(val * adc_lsb(data, nr), 10);
 666}
 667
 668static inline u8 FAN_TO_REG(long rpm, int div)
 669{
 670	if (rpm == 0)
 671		return 255;
 672	rpm = clamp_val(rpm, 1, 1000000);
 673	return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
 674}
 675
 676static inline u16 FAN16_TO_REG(long rpm)
 677{
 678	if (rpm == 0)
 679		return 0xffff;
 680	return clamp_val((1350000 + rpm) / (rpm * 2), 1, 0xfffe);
 681}
 682
 683#define FAN_FROM_REG(val, div) ((val) == 0 ? -1 : (val) == 255 ? 0 : \
 684				1350000 / ((val) * (div)))
 685/* The divider is fixed to 2 in 16-bit mode */
 686#define FAN16_FROM_REG(val) ((val) == 0 ? -1 : (val) == 0xffff ? 0 : \
 687			     1350000 / ((val) * 2))
 688
 689#define TEMP_TO_REG(val) (clamp_val(((val) < 0 ? (((val) - 500) / 1000) : \
 690				    ((val) + 500) / 1000), -128, 127))
 691#define TEMP_FROM_REG(val) ((val) * 1000)
 692
 693static u8 pwm_to_reg(const struct it87_data *data, long val)
 694{
 695	if (has_newer_autopwm(data))
 696		return val;
 697	else
 698		return val >> 1;
 699}
 700
 701static int pwm_from_reg(const struct it87_data *data, u8 reg)
 702{
 703	if (has_newer_autopwm(data))
 704		return reg;
 705	else
 706		return (reg & 0x7f) << 1;
 707}
 708
 
 709static int DIV_TO_REG(int val)
 710{
 711	int answer = 0;
 712
 713	while (answer < 7 && (val >>= 1))
 714		answer++;
 715	return answer;
 716}
 
 717
 718#define DIV_FROM_REG(val) BIT(val)
 719
 720/*
 721 * PWM base frequencies. The frequency has to be divided by either 128 or 256,
 722 * depending on the chip type, to calculate the actual PWM frequency.
 723 *
 724 * Some of the chip datasheets suggest a base frequency of 51 kHz instead
 725 * of 750 kHz for the slowest base frequency, resulting in a PWM frequency
 726 * of 200 Hz. Sometimes both PWM frequency select registers are affected,
 727 * sometimes just one. It is unknown if this is a datasheet error or real,
 728 * so this is ignored for now.
 729 */
 730static const unsigned int pwm_freq[8] = {
 731	48000000,
 732	24000000,
 733	12000000,
 734	8000000,
 735	6000000,
 736	3000000,
 737	1500000,
 738	750000,
 739};
 
 
 
 
 
 
 
 
 
 740
 741static int smbus_disable(struct it87_data *data)
 742{
 743	int err;
 744
 745	if (data->smbus_bitmap) {
 746		err = superio_enter(data->sioaddr, has_noconf(data));
 747		if (err)
 748			return err;
 749		superio_select(data->sioaddr, PME);
 750		superio_outb(data->sioaddr, IT87_SPECIAL_CFG_REG,
 751			     data->ec_special_config & ~data->smbus_bitmap);
 752		superio_exit(data->sioaddr, has_noconf(data));
 753	}
 754	return 0;
 755}
 756
 757static int smbus_enable(struct it87_data *data)
 758{
 759	int err;
 760
 761	if (data->smbus_bitmap) {
 762		err = superio_enter(data->sioaddr, has_noconf(data));
 763		if (err)
 764			return err;
 765
 766		superio_select(data->sioaddr, PME);
 767		superio_outb(data->sioaddr, IT87_SPECIAL_CFG_REG,
 768			     data->ec_special_config);
 769		superio_exit(data->sioaddr, has_noconf(data));
 770	}
 771	return 0;
 772}
 773
 774/*
 775 * Must be called with data->update_lock held, except during initialization.
 776 * Must be called with SMBus accesses disabled.
 777 * We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
 778 * would slow down the IT87 access and should not be necessary.
 779 */
 780static int it87_read_value(struct it87_data *data, u8 reg)
 781{
 782	outb_p(reg, data->addr + IT87_ADDR_REG_OFFSET);
 783	return inb_p(data->addr + IT87_DATA_REG_OFFSET);
 784}
 785
 786/*
 787 * Must be called with data->update_lock held, except during initialization.
 788 * Must be called with SMBus accesses disabled.
 789 * We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
 790 * would slow down the IT87 access and should not be necessary.
 791 */
 792static void it87_write_value(struct it87_data *data, u8 reg, u8 value)
 793{
 794	outb_p(reg, data->addr + IT87_ADDR_REG_OFFSET);
 795	outb_p(value, data->addr + IT87_DATA_REG_OFFSET);
 796}
 797
 798static void it87_update_pwm_ctrl(struct it87_data *data, int nr)
 799{
 800	data->pwm_ctrl[nr] = it87_read_value(data, IT87_REG_PWM[nr]);
 801	if (has_newer_autopwm(data)) {
 802		data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03;
 803		data->pwm_duty[nr] = it87_read_value(data,
 804						     IT87_REG_PWM_DUTY[nr]);
 805	} else {
 806		if (data->pwm_ctrl[nr] & 0x80)	/* Automatic mode */
 807			data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03;
 808		else				/* Manual mode */
 809			data->pwm_duty[nr] = data->pwm_ctrl[nr] & 0x7f;
 810	}
 811
 812	if (has_old_autopwm(data)) {
 813		int i;
 814
 815		for (i = 0; i < 5 ; i++)
 816			data->auto_temp[nr][i] = it87_read_value(data,
 817						IT87_REG_AUTO_TEMP(nr, i));
 818		for (i = 0; i < 3 ; i++)
 819			data->auto_pwm[nr][i] = it87_read_value(data,
 820						IT87_REG_AUTO_PWM(nr, i));
 821	} else if (has_newer_autopwm(data)) {
 822		int i;
 823
 824		/*
 825		 * 0: temperature hysteresis (base + 5)
 826		 * 1: fan off temperature (base + 0)
 827		 * 2: fan start temperature (base + 1)
 828		 * 3: fan max temperature (base + 2)
 829		 */
 830		data->auto_temp[nr][0] =
 831			it87_read_value(data, IT87_REG_AUTO_TEMP(nr, 5));
 832
 833		for (i = 0; i < 3 ; i++)
 834			data->auto_temp[nr][i + 1] =
 835				it87_read_value(data,
 836						IT87_REG_AUTO_TEMP(nr, i));
 837		/*
 838		 * 0: start pwm value (base + 3)
 839		 * 1: pwm slope (base + 4, 1/8th pwm)
 840		 */
 841		data->auto_pwm[nr][0] =
 842			it87_read_value(data, IT87_REG_AUTO_TEMP(nr, 3));
 843		data->auto_pwm[nr][1] =
 844			it87_read_value(data, IT87_REG_AUTO_TEMP(nr, 4));
 845	}
 846}
 847
 848static int it87_lock(struct it87_data *data)
 849{
 850	int err;
 851
 852	mutex_lock(&data->update_lock);
 853	err = smbus_disable(data);
 854	if (err)
 855		mutex_unlock(&data->update_lock);
 856	return err;
 857}
 858
 859static void it87_unlock(struct it87_data *data)
 860{
 861	smbus_enable(data);
 862	mutex_unlock(&data->update_lock);
 863}
 864
 865static struct it87_data *it87_update_device(struct device *dev)
 866{
 867	struct it87_data *data = dev_get_drvdata(dev);
 868	struct it87_data *ret = data;
 869	int err;
 870	int i;
 871
 872	mutex_lock(&data->update_lock);
 873
 874	if (time_after(jiffies, data->last_updated + HZ + HZ / 2) ||
 875		       !data->valid) {
 876		err = smbus_disable(data);
 877		if (err) {
 878			ret = ERR_PTR(err);
 879			goto unlock;
 880		}
 881		if (update_vbat) {
 882			/*
 883			 * Cleared after each update, so reenable.  Value
 884			 * returned by this read will be previous value
 885			 */
 886			it87_write_value(data, IT87_REG_CONFIG,
 887				it87_read_value(data, IT87_REG_CONFIG) | 0x40);
 888		}
 889		for (i = 0; i < NUM_VIN; i++) {
 890			if (!(data->has_in & BIT(i)))
 891				continue;
 892
 893			data->in[i][0] =
 894				it87_read_value(data, IT87_REG_VIN[i]);
 895
 896			/* VBAT and AVCC don't have limit registers */
 897			if (i >= NUM_VIN_LIMIT)
 898				continue;
 899
 900			data->in[i][1] =
 901				it87_read_value(data, IT87_REG_VIN_MIN(i));
 902			data->in[i][2] =
 903				it87_read_value(data, IT87_REG_VIN_MAX(i));
 904		}
 905
 906		for (i = 0; i < NUM_FAN; i++) {
 907			/* Skip disabled fans */
 908			if (!(data->has_fan & BIT(i)))
 909				continue;
 910
 911			data->fan[i][1] =
 912				it87_read_value(data, IT87_REG_FAN_MIN[i]);
 913			data->fan[i][0] = it87_read_value(data,
 914				       IT87_REG_FAN[i]);
 915			/* Add high byte if in 16-bit mode */
 916			if (has_16bit_fans(data)) {
 917				data->fan[i][0] |= it87_read_value(data,
 918						IT87_REG_FANX[i]) << 8;
 919				data->fan[i][1] |= it87_read_value(data,
 920						IT87_REG_FANX_MIN[i]) << 8;
 921			}
 922		}
 923		for (i = 0; i < NUM_TEMP; i++) {
 924			if (!(data->has_temp & BIT(i)))
 925				continue;
 926			data->temp[i][0] =
 927				it87_read_value(data, IT87_REG_TEMP(i));
 928
 929			if (has_temp_offset(data) && i < NUM_TEMP_OFFSET)
 930				data->temp[i][3] =
 931				  it87_read_value(data,
 932						  IT87_REG_TEMP_OFFSET[i]);
 933
 934			if (i >= NUM_TEMP_LIMIT)
 935				continue;
 936
 937			data->temp[i][1] =
 938				it87_read_value(data, IT87_REG_TEMP_LOW(i));
 939			data->temp[i][2] =
 940				it87_read_value(data, IT87_REG_TEMP_HIGH(i));
 941		}
 942
 943		/* Newer chips don't have clock dividers */
 944		if ((data->has_fan & 0x07) && !has_16bit_fans(data)) {
 945			i = it87_read_value(data, IT87_REG_FAN_DIV);
 946			data->fan_div[0] = i & 0x07;
 947			data->fan_div[1] = (i >> 3) & 0x07;
 948			data->fan_div[2] = (i & 0x40) ? 3 : 1;
 949		}
 950
 951		data->alarms =
 952			it87_read_value(data, IT87_REG_ALARM1) |
 953			(it87_read_value(data, IT87_REG_ALARM2) << 8) |
 954			(it87_read_value(data, IT87_REG_ALARM3) << 16);
 955		data->beeps = it87_read_value(data, IT87_REG_BEEP_ENABLE);
 956
 957		data->fan_main_ctrl = it87_read_value(data,
 958				IT87_REG_FAN_MAIN_CTRL);
 959		data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL);
 960		for (i = 0; i < NUM_PWM; i++) {
 961			if (!(data->has_pwm & BIT(i)))
 962				continue;
 963			it87_update_pwm_ctrl(data, i);
 964		}
 965
 966		data->sensor = it87_read_value(data, IT87_REG_TEMP_ENABLE);
 967		data->extra = it87_read_value(data, IT87_REG_TEMP_EXTRA);
 968		/*
 969		 * The IT8705F does not have VID capability.
 970		 * The IT8718F and later don't use IT87_REG_VID for the
 971		 * same purpose.
 972		 */
 973		if (data->type == it8712 || data->type == it8716) {
 974			data->vid = it87_read_value(data, IT87_REG_VID);
 975			/*
 976			 * The older IT8712F revisions had only 5 VID pins,
 977			 * but we assume it is always safe to read 6 bits.
 978			 */
 979			data->vid &= 0x3f;
 980		}
 981		data->last_updated = jiffies;
 982		data->valid = true;
 983		smbus_enable(data);
 984	}
 985unlock:
 986	mutex_unlock(&data->update_lock);
 987	return ret;
 988}
 989
 990static ssize_t show_in(struct device *dev, struct device_attribute *attr,
 991		       char *buf)
 992{
 993	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
 994	struct it87_data *data = it87_update_device(dev);
 995	int index = sattr->index;
 996	int nr = sattr->nr;
 
 997
 998	if (IS_ERR(data))
 999		return PTR_ERR(data);
1000
1001	return sprintf(buf, "%d\n", in_from_reg(data, nr, data->in[nr][index]));
1002}
1003
1004static ssize_t set_in(struct device *dev, struct device_attribute *attr,
1005		      const char *buf, size_t count)
1006{
1007	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
1008	struct it87_data *data = dev_get_drvdata(dev);
1009	int index = sattr->index;
1010	int nr = sattr->nr;
 
 
 
1011	unsigned long val;
1012	int err;
1013
1014	if (kstrtoul(buf, 10, &val) < 0)
1015		return -EINVAL;
1016
1017	err = it87_lock(data);
1018	if (err)
1019		return err;
1020
1021	data->in[nr][index] = in_to_reg(data, nr, val);
1022	it87_write_value(data,
1023			 index == 1 ? IT87_REG_VIN_MIN(nr)
1024				    : IT87_REG_VIN_MAX(nr),
1025			 data->in[nr][index]);
1026	it87_unlock(data);
1027	return count;
1028}
1029
1030static SENSOR_DEVICE_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0);
1031static SENSOR_DEVICE_ATTR_2(in0_min, S_IRUGO | S_IWUSR, show_in, set_in,
1032			    0, 1);
1033static SENSOR_DEVICE_ATTR_2(in0_max, S_IRUGO | S_IWUSR, show_in, set_in,
1034			    0, 2);
1035
1036static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 1, 0);
1037static SENSOR_DEVICE_ATTR_2(in1_min, S_IRUGO | S_IWUSR, show_in, set_in,
1038			    1, 1);
1039static SENSOR_DEVICE_ATTR_2(in1_max, S_IRUGO | S_IWUSR, show_in, set_in,
1040			    1, 2);
1041
1042static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 2, 0);
1043static SENSOR_DEVICE_ATTR_2(in2_min, S_IRUGO | S_IWUSR, show_in, set_in,
1044			    2, 1);
1045static SENSOR_DEVICE_ATTR_2(in2_max, S_IRUGO | S_IWUSR, show_in, set_in,
1046			    2, 2);
1047
1048static SENSOR_DEVICE_ATTR_2(in3_input, S_IRUGO, show_in, NULL, 3, 0);
1049static SENSOR_DEVICE_ATTR_2(in3_min, S_IRUGO | S_IWUSR, show_in, set_in,
1050			    3, 1);
1051static SENSOR_DEVICE_ATTR_2(in3_max, S_IRUGO | S_IWUSR, show_in, set_in,
1052			    3, 2);
1053
1054static SENSOR_DEVICE_ATTR_2(in4_input, S_IRUGO, show_in, NULL, 4, 0);
1055static SENSOR_DEVICE_ATTR_2(in4_min, S_IRUGO | S_IWUSR, show_in, set_in,
1056			    4, 1);
1057static SENSOR_DEVICE_ATTR_2(in4_max, S_IRUGO | S_IWUSR, show_in, set_in,
1058			    4, 2);
1059
1060static SENSOR_DEVICE_ATTR_2(in5_input, S_IRUGO, show_in, NULL, 5, 0);
1061static SENSOR_DEVICE_ATTR_2(in5_min, S_IRUGO | S_IWUSR, show_in, set_in,
1062			    5, 1);
1063static SENSOR_DEVICE_ATTR_2(in5_max, S_IRUGO | S_IWUSR, show_in, set_in,
1064			    5, 2);
1065
1066static SENSOR_DEVICE_ATTR_2(in6_input, S_IRUGO, show_in, NULL, 6, 0);
1067static SENSOR_DEVICE_ATTR_2(in6_min, S_IRUGO | S_IWUSR, show_in, set_in,
1068			    6, 1);
1069static SENSOR_DEVICE_ATTR_2(in6_max, S_IRUGO | S_IWUSR, show_in, set_in,
1070			    6, 2);
1071
1072static SENSOR_DEVICE_ATTR_2(in7_input, S_IRUGO, show_in, NULL, 7, 0);
1073static SENSOR_DEVICE_ATTR_2(in7_min, S_IRUGO | S_IWUSR, show_in, set_in,
1074			    7, 1);
1075static SENSOR_DEVICE_ATTR_2(in7_max, S_IRUGO | S_IWUSR, show_in, set_in,
1076			    7, 2);
1077
1078static SENSOR_DEVICE_ATTR_2(in8_input, S_IRUGO, show_in, NULL, 8, 0);
1079static SENSOR_DEVICE_ATTR_2(in9_input, S_IRUGO, show_in, NULL, 9, 0);
1080static SENSOR_DEVICE_ATTR_2(in10_input, S_IRUGO, show_in, NULL, 10, 0);
1081static SENSOR_DEVICE_ATTR_2(in11_input, S_IRUGO, show_in, NULL, 11, 0);
1082static SENSOR_DEVICE_ATTR_2(in12_input, S_IRUGO, show_in, NULL, 12, 0);
1083
1084/* Up to 6 temperatures */
1085static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
1086			 char *buf)
1087{
1088	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
1089	int nr = sattr->nr;
1090	int index = sattr->index;
1091	struct it87_data *data = it87_update_device(dev);
1092
1093	if (IS_ERR(data))
1094		return PTR_ERR(data);
1095
1096	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr][index]));
1097}
1098
1099static ssize_t set_temp(struct device *dev, struct device_attribute *attr,
1100			const char *buf, size_t count)
1101{
1102	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
1103	int nr = sattr->nr;
1104	int index = sattr->index;
1105	struct it87_data *data = dev_get_drvdata(dev);
1106	long val;
1107	u8 reg, regval;
1108	int err;
1109
1110	if (kstrtol(buf, 10, &val) < 0)
1111		return -EINVAL;
1112
1113	err = it87_lock(data);
1114	if (err)
1115		return err;
1116
1117	switch (index) {
1118	default:
1119	case 1:
1120		reg = IT87_REG_TEMP_LOW(nr);
1121		break;
1122	case 2:
1123		reg = IT87_REG_TEMP_HIGH(nr);
1124		break;
1125	case 3:
1126		regval = it87_read_value(data, IT87_REG_BEEP_ENABLE);
1127		if (!(regval & 0x80)) {
1128			regval |= 0x80;
1129			it87_write_value(data, IT87_REG_BEEP_ENABLE, regval);
1130		}
1131		data->valid = false;
1132		reg = IT87_REG_TEMP_OFFSET[nr];
1133		break;
1134	}
1135
1136	data->temp[nr][index] = TEMP_TO_REG(val);
1137	it87_write_value(data, reg, data->temp[nr][index]);
1138	it87_unlock(data);
1139	return count;
1140}
1141
1142static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0);
1143static SENSOR_DEVICE_ATTR_2(temp1_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
1144			    0, 1);
1145static SENSOR_DEVICE_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
1146			    0, 2);
1147static SENSOR_DEVICE_ATTR_2(temp1_offset, S_IRUGO | S_IWUSR, show_temp,
1148			    set_temp, 0, 3);
1149static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 1, 0);
1150static SENSOR_DEVICE_ATTR_2(temp2_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
1151			    1, 1);
1152static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
1153			    1, 2);
1154static SENSOR_DEVICE_ATTR_2(temp2_offset, S_IRUGO | S_IWUSR, show_temp,
1155			    set_temp, 1, 3);
1156static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 2, 0);
1157static SENSOR_DEVICE_ATTR_2(temp3_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
1158			    2, 1);
1159static SENSOR_DEVICE_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
1160			    2, 2);
1161static SENSOR_DEVICE_ATTR_2(temp3_offset, S_IRUGO | S_IWUSR, show_temp,
1162			    set_temp, 2, 3);
1163static SENSOR_DEVICE_ATTR_2(temp4_input, S_IRUGO, show_temp, NULL, 3, 0);
1164static SENSOR_DEVICE_ATTR_2(temp5_input, S_IRUGO, show_temp, NULL, 4, 0);
1165static SENSOR_DEVICE_ATTR_2(temp6_input, S_IRUGO, show_temp, NULL, 5, 0);
1166
1167static int get_temp_type(struct it87_data *data, int index)
1168{
1169	/*
1170	 * 2 is deprecated;
1171	 * 3 = thermal diode;
1172	 * 4 = thermistor;
1173	 * 5 = AMDTSI;
1174	 * 6 = Intel PECI;
1175	 * 0 = disabled
1176	 */
1177	u8 reg, extra;
1178	int ttype, type = 0;
1179
1180	/* Detect PECI vs. AMDTSI */
1181	ttype = 6;
1182	if ((has_temp_peci(data, index)) || data->type == it8721 ||
1183	    data->type == it8720) {
1184		extra = it87_read_value(data, IT87_REG_IFSEL);
1185		if ((extra & 0x70) == 0x40)
1186			ttype = 5;
1187	}
1188
1189	reg = it87_read_value(data, IT87_REG_TEMP_ENABLE);
1190
1191	/* Per chip special detection */
1192	switch (data->type) {
1193	case it8622:
1194		if (!(reg & 0xc0) && index == 3)
1195			type = ttype;
1196		break;
1197	default:
1198		break;
1199	}
1200
1201	if (type || index >= 3)
1202		return type;
1203
1204	extra = it87_read_value(data, IT87_REG_TEMP_EXTRA);
1205
1206	if ((has_temp_peci(data, index) && (reg >> 6 == index + 1)) ||
1207	    (has_temp_old_peci(data, index) && (extra & 0x80)))
1208		type = ttype;	/* Intel PECI or AMDTSI */
1209	else if (reg & BIT(index))
1210		type = 3;	/* thermal diode */
1211	else if (reg & BIT(index + 3))
1212		type = 4;	/* thermistor */
1213
1214	return type;
1215}
1216
1217static ssize_t show_temp_type(struct device *dev, struct device_attribute *attr,
1218			      char *buf)
1219{
1220	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
 
1221	struct it87_data *data = it87_update_device(dev);
 
 
1222
1223	if (IS_ERR(data))
1224		return PTR_ERR(data);
1225
1226	return sprintf(buf, "%d\n", get_temp_type(data, sensor_attr->index));
 
 
 
 
1227}
1228
1229static ssize_t set_temp_type(struct device *dev, struct device_attribute *attr,
1230			     const char *buf, size_t count)
1231{
1232	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
1233	int nr = sensor_attr->index;
1234
1235	struct it87_data *data = dev_get_drvdata(dev);
1236	long val;
1237	u8 reg, extra;
1238	int err;
1239
1240	if (kstrtol(buf, 10, &val) < 0)
1241		return -EINVAL;
1242
1243	err = it87_lock(data);
1244	if (err)
1245		return err;
1246
1247	reg = it87_read_value(data, IT87_REG_TEMP_ENABLE);
1248	reg &= ~(1 << nr);
1249	reg &= ~(8 << nr);
1250	if (has_temp_peci(data, nr) && (reg >> 6 == nr + 1 || val == 6))
1251		reg &= 0x3f;
1252	extra = it87_read_value(data, IT87_REG_TEMP_EXTRA);
1253	if (has_temp_old_peci(data, nr) && ((extra & 0x80) || val == 6))
1254		extra &= 0x7f;
1255	if (val == 2) {	/* backwards compatibility */
1256		dev_warn(dev,
1257			 "Sensor type 2 is deprecated, please use 4 instead\n");
1258		val = 4;
1259	}
1260	/* 3 = thermal diode; 4 = thermistor; 6 = Intel PECI; 0 = disabled */
1261	if (val == 3)
1262		reg |= 1 << nr;
1263	else if (val == 4)
1264		reg |= 8 << nr;
1265	else if (has_temp_peci(data, nr) && val == 6)
1266		reg |= (nr + 1) << 6;
1267	else if (has_temp_old_peci(data, nr) && val == 6)
1268		extra |= 0x80;
1269	else if (val != 0) {
1270		count = -EINVAL;
1271		goto unlock;
1272	}
1273
 
1274	data->sensor = reg;
1275	data->extra = extra;
1276	it87_write_value(data, IT87_REG_TEMP_ENABLE, data->sensor);
1277	if (has_temp_old_peci(data, nr))
1278		it87_write_value(data, IT87_REG_TEMP_EXTRA, data->extra);
1279	data->valid = false;	/* Force cache refresh */
1280unlock:
1281	it87_unlock(data);
1282	return count;
1283}
1284
1285static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO | S_IWUSR, show_temp_type,
1286			  set_temp_type, 0);
1287static SENSOR_DEVICE_ATTR(temp2_type, S_IRUGO | S_IWUSR, show_temp_type,
1288			  set_temp_type, 1);
1289static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO | S_IWUSR, show_temp_type,
1290			  set_temp_type, 2);
1291
1292/* 6 Fans */
1293
1294static int pwm_mode(const struct it87_data *data, int nr)
1295{
1296	if (has_fanctl_onoff(data) && nr < 3 &&
1297	    !(data->fan_main_ctrl & BIT(nr)))
1298		return 0;			/* Full speed */
1299	if (data->pwm_ctrl[nr] & 0x80)
1300		return 2;			/* Automatic mode */
1301	if ((!has_fanctl_onoff(data) || nr >= 3) &&
1302	    data->pwm_duty[nr] == pwm_to_reg(data, 0xff))
1303		return 0;			/* Full speed */
1304
1305	return 1;				/* Manual mode */
 
 
 
 
 
1306}
1307
1308static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
1309			char *buf)
1310{
1311	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
1312	int nr = sattr->nr;
1313	int index = sattr->index;
1314	int speed;
1315	struct it87_data *data = it87_update_device(dev);
1316
1317	if (IS_ERR(data))
1318		return PTR_ERR(data);
1319
1320	speed = has_16bit_fans(data) ?
1321		FAN16_FROM_REG(data->fan[nr][index]) :
1322		FAN_FROM_REG(data->fan[nr][index],
1323			     DIV_FROM_REG(data->fan_div[nr]));
1324	return sprintf(buf, "%d\n", speed);
1325}
1326
1327static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr,
1328			    char *buf)
1329{
1330	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
1331	struct it87_data *data = it87_update_device(dev);
1332	int nr = sensor_attr->index;
1333
1334	if (IS_ERR(data))
1335		return PTR_ERR(data);
1336
1337	return sprintf(buf, "%lu\n", DIV_FROM_REG(data->fan_div[nr]));
1338}
1339
1340static ssize_t show_pwm_enable(struct device *dev,
1341			       struct device_attribute *attr, char *buf)
1342{
1343	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
1344	struct it87_data *data = it87_update_device(dev);
1345	int nr = sensor_attr->index;
1346
1347	if (IS_ERR(data))
1348		return PTR_ERR(data);
1349
1350	return sprintf(buf, "%d\n", pwm_mode(data, nr));
1351}
1352
1353static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
1354			char *buf)
1355{
1356	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
1357	struct it87_data *data = it87_update_device(dev);
1358	int nr = sensor_attr->index;
1359
1360	if (IS_ERR(data))
1361		return PTR_ERR(data);
1362
1363	return sprintf(buf, "%d\n",
1364		       pwm_from_reg(data, data->pwm_duty[nr]));
1365}
1366
1367static ssize_t show_pwm_freq(struct device *dev, struct device_attribute *attr,
1368			     char *buf)
1369{
1370	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
1371	struct it87_data *data = it87_update_device(dev);
1372	int nr = sensor_attr->index;
1373	unsigned int freq;
1374	int index;
1375
1376	if (IS_ERR(data))
1377		return PTR_ERR(data);
1378
1379	if (has_pwm_freq2(data) && nr == 1)
1380		index = (data->extra >> 4) & 0x07;
1381	else
1382		index = (data->fan_ctl >> 4) & 0x07;
1383
1384	freq = pwm_freq[index] / (has_newer_autopwm(data) ? 256 : 128);
1385
1386	return sprintf(buf, "%u\n", freq);
1387}
1388
1389static ssize_t set_fan(struct device *dev, struct device_attribute *attr,
1390		       const char *buf, size_t count)
1391{
1392	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
1393	int nr = sattr->nr;
1394	int index = sattr->index;
1395
1396	struct it87_data *data = dev_get_drvdata(dev);
1397	long val;
1398	int err;
1399	u8 reg;
1400
1401	if (kstrtol(buf, 10, &val) < 0)
1402		return -EINVAL;
1403
1404	err = it87_lock(data);
1405	if (err)
1406		return err;
1407
1408	if (has_16bit_fans(data)) {
1409		data->fan[nr][index] = FAN16_TO_REG(val);
1410		it87_write_value(data, IT87_REG_FAN_MIN[nr],
1411				 data->fan[nr][index] & 0xff);
1412		it87_write_value(data, IT87_REG_FANX_MIN[nr],
1413				 data->fan[nr][index] >> 8);
1414	} else {
1415		reg = it87_read_value(data, IT87_REG_FAN_DIV);
1416		switch (nr) {
1417		case 0:
1418			data->fan_div[nr] = reg & 0x07;
1419			break;
1420		case 1:
1421			data->fan_div[nr] = (reg >> 3) & 0x07;
1422			break;
1423		case 2:
1424			data->fan_div[nr] = (reg & 0x40) ? 3 : 1;
1425			break;
1426		}
1427		data->fan[nr][index] =
1428		  FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
1429		it87_write_value(data, IT87_REG_FAN_MIN[nr],
1430				 data->fan[nr][index]);
1431	}
1432
1433	it87_unlock(data);
1434	return count;
1435}
1436
1437static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
1438			   const char *buf, size_t count)
1439{
1440	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
1441	struct it87_data *data = dev_get_drvdata(dev);
1442	int nr = sensor_attr->index;
 
 
1443	unsigned long val;
1444	int min, err;
1445	u8 old;
1446
1447	if (kstrtoul(buf, 10, &val) < 0)
1448		return -EINVAL;
1449
1450	err = it87_lock(data);
1451	if (err)
1452		return err;
1453
1454	old = it87_read_value(data, IT87_REG_FAN_DIV);
1455
1456	/* Save fan min limit */
1457	min = FAN_FROM_REG(data->fan[nr][1], DIV_FROM_REG(data->fan_div[nr]));
1458
1459	switch (nr) {
1460	case 0:
1461	case 1:
1462		data->fan_div[nr] = DIV_TO_REG(val);
1463		break;
1464	case 2:
1465		if (val < 8)
1466			data->fan_div[nr] = 1;
1467		else
1468			data->fan_div[nr] = 3;
1469	}
1470	val = old & 0x80;
1471	val |= (data->fan_div[0] & 0x07);
1472	val |= (data->fan_div[1] & 0x07) << 3;
1473	if (data->fan_div[2] == 3)
1474		val |= 0x1 << 6;
1475	it87_write_value(data, IT87_REG_FAN_DIV, val);
1476
1477	/* Restore fan min limit */
1478	data->fan[nr][1] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
1479	it87_write_value(data, IT87_REG_FAN_MIN[nr], data->fan[nr][1]);
1480
1481	it87_unlock(data);
1482	return count;
1483}
1484
1485/* Returns 0 if OK, -EINVAL otherwise */
1486static int check_trip_points(struct device *dev, int nr)
1487{
1488	const struct it87_data *data = dev_get_drvdata(dev);
1489	int i, err = 0;
1490
1491	if (has_old_autopwm(data)) {
1492		for (i = 0; i < 3; i++) {
1493			if (data->auto_temp[nr][i] > data->auto_temp[nr][i + 1])
1494				err = -EINVAL;
1495		}
1496		for (i = 0; i < 2; i++) {
1497			if (data->auto_pwm[nr][i] > data->auto_pwm[nr][i + 1])
1498				err = -EINVAL;
1499		}
1500	} else if (has_newer_autopwm(data)) {
1501		for (i = 1; i < 3; i++) {
1502			if (data->auto_temp[nr][i] > data->auto_temp[nr][i + 1])
1503				err = -EINVAL;
1504		}
1505	}
1506
1507	if (err) {
1508		dev_err(dev,
1509			"Inconsistent trip points, not switching to automatic mode\n");
1510		dev_err(dev, "Adjust the trip points and try again\n");
1511	}
1512	return err;
1513}
1514
1515static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *attr,
1516			      const char *buf, size_t count)
1517{
1518	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
1519	struct it87_data *data = dev_get_drvdata(dev);
1520	int nr = sensor_attr->index;
 
 
1521	long val;
1522	int err;
1523
1524	if (kstrtol(buf, 10, &val) < 0 || val < 0 || val > 2)
1525		return -EINVAL;
1526
1527	/* Check trip points before switching to automatic mode */
1528	if (val == 2) {
1529		if (check_trip_points(dev, nr) < 0)
1530			return -EINVAL;
1531	}
1532
1533	err = it87_lock(data);
1534	if (err)
1535		return err;
1536
1537	if (val == 0) {
1538		if (nr < 3 && has_fanctl_onoff(data)) {
1539			int tmp;
1540			/* make sure the fan is on when in on/off mode */
1541			tmp = it87_read_value(data, IT87_REG_FAN_CTL);
1542			it87_write_value(data, IT87_REG_FAN_CTL, tmp | BIT(nr));
1543			/* set on/off mode */
1544			data->fan_main_ctrl &= ~BIT(nr);
1545			it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
1546					 data->fan_main_ctrl);
1547		} else {
1548			u8 ctrl;
1549
1550			/* No on/off mode, set maximum pwm value */
1551			data->pwm_duty[nr] = pwm_to_reg(data, 0xff);
1552			it87_write_value(data, IT87_REG_PWM_DUTY[nr],
1553					 data->pwm_duty[nr]);
1554			/* and set manual mode */
1555			if (has_newer_autopwm(data)) {
1556				ctrl = (data->pwm_ctrl[nr] & 0x7c) |
1557					data->pwm_temp_map[nr];
1558			} else {
1559				ctrl = data->pwm_duty[nr];
1560			}
1561			data->pwm_ctrl[nr] = ctrl;
1562			it87_write_value(data, IT87_REG_PWM[nr], ctrl);
1563		}
1564	} else {
1565		u8 ctrl;
1566
1567		if (has_newer_autopwm(data)) {
1568			ctrl = (data->pwm_ctrl[nr] & 0x7c) |
1569				data->pwm_temp_map[nr];
1570			if (val != 1)
1571				ctrl |= 0x80;
1572		} else {
1573			ctrl = (val == 1 ? data->pwm_duty[nr] : 0x80);
1574		}
1575		data->pwm_ctrl[nr] = ctrl;
1576		it87_write_value(data, IT87_REG_PWM[nr], ctrl);
1577
1578		if (has_fanctl_onoff(data) && nr < 3) {
1579			/* set SmartGuardian mode */
1580			data->fan_main_ctrl |= BIT(nr);
1581			it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
1582					 data->fan_main_ctrl);
1583		}
1584	}
1585
1586	it87_unlock(data);
1587	return count;
1588}
1589
1590static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
1591		       const char *buf, size_t count)
1592{
1593	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
1594	struct it87_data *data = dev_get_drvdata(dev);
1595	int nr = sensor_attr->index;
 
 
1596	long val;
1597	int err;
1598
1599	if (kstrtol(buf, 10, &val) < 0 || val < 0 || val > 255)
1600		return -EINVAL;
1601
1602	err = it87_lock(data);
1603	if (err)
1604		return err;
1605
1606	it87_update_pwm_ctrl(data, nr);
1607	if (has_newer_autopwm(data)) {
1608		/*
1609		 * If we are in automatic mode, the PWM duty cycle register
1610		 * is read-only so we can't write the value.
1611		 */
1612		if (data->pwm_ctrl[nr] & 0x80) {
1613			count = -EBUSY;
1614			goto unlock;
1615		}
1616		data->pwm_duty[nr] = pwm_to_reg(data, val);
1617		it87_write_value(data, IT87_REG_PWM_DUTY[nr],
1618				 data->pwm_duty[nr]);
1619	} else {
1620		data->pwm_duty[nr] = pwm_to_reg(data, val);
1621		/*
1622		 * If we are in manual mode, write the duty cycle immediately;
1623		 * otherwise, just store it for later use.
1624		 */
1625		if (!(data->pwm_ctrl[nr] & 0x80)) {
1626			data->pwm_ctrl[nr] = data->pwm_duty[nr];
1627			it87_write_value(data, IT87_REG_PWM[nr],
1628					 data->pwm_ctrl[nr]);
1629		}
1630	}
1631unlock:
1632	it87_unlock(data);
1633	return count;
1634}
1635
1636static ssize_t set_pwm_freq(struct device *dev, struct device_attribute *attr,
1637			    const char *buf, size_t count)
1638{
1639	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
1640	struct it87_data *data = dev_get_drvdata(dev);
1641	int nr = sensor_attr->index;
1642	unsigned long val;
1643	int err;
1644	int i;
1645
1646	if (kstrtoul(buf, 10, &val) < 0)
1647		return -EINVAL;
1648
1649	val = clamp_val(val, 0, 1000000);
1650	val *= has_newer_autopwm(data) ? 256 : 128;
1651
1652	/* Search for the nearest available frequency */
1653	for (i = 0; i < 7; i++) {
1654		if (val > (pwm_freq[i] + pwm_freq[i + 1]) / 2)
1655			break;
1656	}
1657
1658	err = it87_lock(data);
1659	if (err)
1660		return err;
1661
1662	if (nr == 0) {
1663		data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL) & 0x8f;
1664		data->fan_ctl |= i << 4;
1665		it87_write_value(data, IT87_REG_FAN_CTL, data->fan_ctl);
1666	} else {
1667		data->extra = it87_read_value(data, IT87_REG_TEMP_EXTRA) & 0x8f;
1668		data->extra |= i << 4;
1669		it87_write_value(data, IT87_REG_TEMP_EXTRA, data->extra);
1670	}
1671	it87_unlock(data);
1672
1673	return count;
1674}
1675
1676static ssize_t show_pwm_temp_map(struct device *dev,
1677				 struct device_attribute *attr, char *buf)
1678{
1679	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
1680	struct it87_data *data = it87_update_device(dev);
1681	int nr = sensor_attr->index;
1682	int map;
1683
1684	if (IS_ERR(data))
1685		return PTR_ERR(data);
1686
1687	map = data->pwm_temp_map[nr];
1688	if (map >= 3)
1689		map = 0;	/* Should never happen */
1690	if (nr >= 3)		/* pwm channels 3..6 map to temp4..6 */
1691		map += 3;
1692
1693	return sprintf(buf, "%d\n", (int)BIT(map));
 
 
 
 
1694}
1695
1696static ssize_t set_pwm_temp_map(struct device *dev,
1697				struct device_attribute *attr, const char *buf,
1698				size_t count)
1699{
1700	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
1701	struct it87_data *data = dev_get_drvdata(dev);
1702	int nr = sensor_attr->index;
 
 
1703	long val;
1704	int err;
1705	u8 reg;
1706
1707	if (kstrtol(buf, 10, &val) < 0)
 
 
 
 
 
1708		return -EINVAL;
 
1709
1710	if (nr >= 3)
1711		val -= 3;
1712
1713	switch (val) {
1714	case BIT(0):
1715		reg = 0x00;
1716		break;
1717	case BIT(1):
1718		reg = 0x01;
1719		break;
1720	case BIT(2):
1721		reg = 0x02;
1722		break;
1723	default:
1724		return -EINVAL;
1725	}
1726
1727	err = it87_lock(data);
1728	if (err)
1729		return err;
1730
1731	it87_update_pwm_ctrl(data, nr);
1732	data->pwm_temp_map[nr] = reg;
1733	/*
1734	 * If we are in automatic mode, write the temp mapping immediately;
1735	 * otherwise, just store it for later use.
1736	 */
1737	if (data->pwm_ctrl[nr] & 0x80) {
1738		data->pwm_ctrl[nr] = (data->pwm_ctrl[nr] & 0xfc) |
1739						data->pwm_temp_map[nr];
1740		it87_write_value(data, IT87_REG_PWM[nr], data->pwm_ctrl[nr]);
1741	}
1742	it87_unlock(data);
1743	return count;
1744}
1745
1746static ssize_t show_auto_pwm(struct device *dev, struct device_attribute *attr,
1747			     char *buf)
1748{
1749	struct it87_data *data = it87_update_device(dev);
1750	struct sensor_device_attribute_2 *sensor_attr =
1751			to_sensor_dev_attr_2(attr);
1752	int nr = sensor_attr->nr;
1753	int point = sensor_attr->index;
1754
1755	if (IS_ERR(data))
1756		return PTR_ERR(data);
1757
1758	return sprintf(buf, "%d\n",
1759		       pwm_from_reg(data, data->auto_pwm[nr][point]));
1760}
1761
1762static ssize_t set_auto_pwm(struct device *dev, struct device_attribute *attr,
1763			    const char *buf, size_t count)
1764{
1765	struct it87_data *data = dev_get_drvdata(dev);
1766	struct sensor_device_attribute_2 *sensor_attr =
1767			to_sensor_dev_attr_2(attr);
1768	int nr = sensor_attr->nr;
1769	int point = sensor_attr->index;
1770	int regaddr;
1771	long val;
1772	int err;
1773
1774	if (kstrtol(buf, 10, &val) < 0 || val < 0 || val > 255)
1775		return -EINVAL;
1776
1777	err = it87_lock(data);
1778	if (err)
1779		return err;
1780
1781	data->auto_pwm[nr][point] = pwm_to_reg(data, val);
1782	if (has_newer_autopwm(data))
1783		regaddr = IT87_REG_AUTO_TEMP(nr, 3);
1784	else
1785		regaddr = IT87_REG_AUTO_PWM(nr, point);
1786	it87_write_value(data, regaddr, data->auto_pwm[nr][point]);
1787	it87_unlock(data);
1788	return count;
1789}
1790
1791static ssize_t show_auto_pwm_slope(struct device *dev,
1792				   struct device_attribute *attr, char *buf)
1793{
1794	struct it87_data *data = it87_update_device(dev);
1795	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
1796	int nr = sensor_attr->index;
1797
1798	if (IS_ERR(data))
1799		return PTR_ERR(data);
1800
1801	return sprintf(buf, "%d\n", data->auto_pwm[nr][1] & 0x7f);
1802}
1803
1804static ssize_t set_auto_pwm_slope(struct device *dev,
1805				  struct device_attribute *attr,
1806				  const char *buf, size_t count)
1807{
1808	struct it87_data *data = dev_get_drvdata(dev);
1809	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
1810	int nr = sensor_attr->index;
1811	unsigned long val;
1812	int err;
1813
1814	if (kstrtoul(buf, 10, &val) < 0 || val > 127)
1815		return -EINVAL;
1816
1817	err = it87_lock(data);
1818	if (err)
1819		return err;
1820
1821	data->auto_pwm[nr][1] = (data->auto_pwm[nr][1] & 0x80) | val;
1822	it87_write_value(data, IT87_REG_AUTO_TEMP(nr, 4),
1823			 data->auto_pwm[nr][1]);
1824	it87_unlock(data);
1825	return count;
1826}
1827
1828static ssize_t show_auto_temp(struct device *dev, struct device_attribute *attr,
1829			      char *buf)
1830{
1831	struct it87_data *data = it87_update_device(dev);
1832	struct sensor_device_attribute_2 *sensor_attr =
1833			to_sensor_dev_attr_2(attr);
1834	int nr = sensor_attr->nr;
1835	int point = sensor_attr->index;
1836	int reg;
1837
1838	if (IS_ERR(data))
1839		return PTR_ERR(data);
1840
1841	if (has_old_autopwm(data) || point)
1842		reg = data->auto_temp[nr][point];
1843	else
1844		reg = data->auto_temp[nr][1] - (data->auto_temp[nr][0] & 0x1f);
1845
1846	return sprintf(buf, "%d\n", TEMP_FROM_REG(reg));
1847}
1848
1849static ssize_t set_auto_temp(struct device *dev, struct device_attribute *attr,
1850			     const char *buf, size_t count)
1851{
1852	struct it87_data *data = dev_get_drvdata(dev);
1853	struct sensor_device_attribute_2 *sensor_attr =
1854			to_sensor_dev_attr_2(attr);
1855	int nr = sensor_attr->nr;
1856	int point = sensor_attr->index;
1857	long val;
1858	int reg;
1859	int err;
1860
1861	if (kstrtol(buf, 10, &val) < 0 || val < -128000 || val > 127000)
1862		return -EINVAL;
1863
1864	err = it87_lock(data);
1865	if (err)
1866		return err;
1867
1868	if (has_newer_autopwm(data) && !point) {
1869		reg = data->auto_temp[nr][1] - TEMP_TO_REG(val);
1870		reg = clamp_val(reg, 0, 0x1f) | (data->auto_temp[nr][0] & 0xe0);
1871		data->auto_temp[nr][0] = reg;
1872		it87_write_value(data, IT87_REG_AUTO_TEMP(nr, 5), reg);
1873	} else {
1874		reg = TEMP_TO_REG(val);
1875		data->auto_temp[nr][point] = reg;
1876		if (has_newer_autopwm(data))
1877			point--;
1878		it87_write_value(data, IT87_REG_AUTO_TEMP(nr, point), reg);
1879	}
1880	it87_unlock(data);
1881	return count;
1882}
1883
1884static SENSOR_DEVICE_ATTR_2(fan1_input, S_IRUGO, show_fan, NULL, 0, 0);
1885static SENSOR_DEVICE_ATTR_2(fan1_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
1886			    0, 1);
1887static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR, show_fan_div,
1888			  set_fan_div, 0);
1889
1890static SENSOR_DEVICE_ATTR_2(fan2_input, S_IRUGO, show_fan, NULL, 1, 0);
1891static SENSOR_DEVICE_ATTR_2(fan2_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
1892			    1, 1);
1893static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR, show_fan_div,
1894			  set_fan_div, 1);
1895
1896static SENSOR_DEVICE_ATTR_2(fan3_input, S_IRUGO, show_fan, NULL, 2, 0);
1897static SENSOR_DEVICE_ATTR_2(fan3_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
1898			    2, 1);
1899static SENSOR_DEVICE_ATTR(fan3_div, S_IRUGO | S_IWUSR, show_fan_div,
1900			  set_fan_div, 2);
1901
1902static SENSOR_DEVICE_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 3, 0);
1903static SENSOR_DEVICE_ATTR_2(fan4_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
1904			    3, 1);
1905
1906static SENSOR_DEVICE_ATTR_2(fan5_input, S_IRUGO, show_fan, NULL, 4, 0);
1907static SENSOR_DEVICE_ATTR_2(fan5_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
1908			    4, 1);
1909
1910static SENSOR_DEVICE_ATTR_2(fan6_input, S_IRUGO, show_fan, NULL, 5, 0);
1911static SENSOR_DEVICE_ATTR_2(fan6_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
1912			    5, 1);
1913
1914static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR,
1915			  show_pwm_enable, set_pwm_enable, 0);
1916static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 0);
1917static SENSOR_DEVICE_ATTR(pwm1_freq, S_IRUGO | S_IWUSR, show_pwm_freq,
1918			  set_pwm_freq, 0);
1919static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IRUGO,
1920			  show_pwm_temp_map, set_pwm_temp_map, 0);
1921static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO | S_IWUSR,
1922			    show_auto_pwm, set_auto_pwm, 0, 0);
1923static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_pwm, S_IRUGO | S_IWUSR,
1924			    show_auto_pwm, set_auto_pwm, 0, 1);
1925static SENSOR_DEVICE_ATTR_2(pwm1_auto_point3_pwm, S_IRUGO | S_IWUSR,
1926			    show_auto_pwm, set_auto_pwm, 0, 2);
1927static SENSOR_DEVICE_ATTR_2(pwm1_auto_point4_pwm, S_IRUGO,
1928			    show_auto_pwm, NULL, 0, 3);
1929static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_temp, S_IRUGO | S_IWUSR,
1930			    show_auto_temp, set_auto_temp, 0, 1);
1931static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_temp_hyst, S_IRUGO | S_IWUSR,
1932			    show_auto_temp, set_auto_temp, 0, 0);
1933static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_temp, S_IRUGO | S_IWUSR,
1934			    show_auto_temp, set_auto_temp, 0, 2);
1935static SENSOR_DEVICE_ATTR_2(pwm1_auto_point3_temp, S_IRUGO | S_IWUSR,
1936			    show_auto_temp, set_auto_temp, 0, 3);
1937static SENSOR_DEVICE_ATTR_2(pwm1_auto_point4_temp, S_IRUGO | S_IWUSR,
1938			    show_auto_temp, set_auto_temp, 0, 4);
1939static SENSOR_DEVICE_ATTR_2(pwm1_auto_start, S_IRUGO | S_IWUSR,
1940			    show_auto_pwm, set_auto_pwm, 0, 0);
1941static SENSOR_DEVICE_ATTR(pwm1_auto_slope, S_IRUGO | S_IWUSR,
1942			  show_auto_pwm_slope, set_auto_pwm_slope, 0);
1943
1944static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO | S_IWUSR,
1945			  show_pwm_enable, set_pwm_enable, 1);
1946static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 1);
1947static SENSOR_DEVICE_ATTR(pwm2_freq, S_IRUGO, show_pwm_freq, set_pwm_freq, 1);
1948static SENSOR_DEVICE_ATTR(pwm2_auto_channels_temp, S_IRUGO,
1949			  show_pwm_temp_map, set_pwm_temp_map, 1);
1950static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO | S_IWUSR,
1951			    show_auto_pwm, set_auto_pwm, 1, 0);
1952static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_pwm, S_IRUGO | S_IWUSR,
1953			    show_auto_pwm, set_auto_pwm, 1, 1);
1954static SENSOR_DEVICE_ATTR_2(pwm2_auto_point3_pwm, S_IRUGO | S_IWUSR,
1955			    show_auto_pwm, set_auto_pwm, 1, 2);
1956static SENSOR_DEVICE_ATTR_2(pwm2_auto_point4_pwm, S_IRUGO,
1957			    show_auto_pwm, NULL, 1, 3);
1958static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_temp, S_IRUGO | S_IWUSR,
1959			    show_auto_temp, set_auto_temp, 1, 1);
1960static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_temp_hyst, S_IRUGO | S_IWUSR,
1961			    show_auto_temp, set_auto_temp, 1, 0);
1962static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_temp, S_IRUGO | S_IWUSR,
1963			    show_auto_temp, set_auto_temp, 1, 2);
1964static SENSOR_DEVICE_ATTR_2(pwm2_auto_point3_temp, S_IRUGO | S_IWUSR,
1965			    show_auto_temp, set_auto_temp, 1, 3);
1966static SENSOR_DEVICE_ATTR_2(pwm2_auto_point4_temp, S_IRUGO | S_IWUSR,
1967			    show_auto_temp, set_auto_temp, 1, 4);
1968static SENSOR_DEVICE_ATTR_2(pwm2_auto_start, S_IRUGO | S_IWUSR,
1969			    show_auto_pwm, set_auto_pwm, 1, 0);
1970static SENSOR_DEVICE_ATTR(pwm2_auto_slope, S_IRUGO | S_IWUSR,
1971			  show_auto_pwm_slope, set_auto_pwm_slope, 1);
1972
1973static SENSOR_DEVICE_ATTR(pwm3_enable, S_IRUGO | S_IWUSR,
1974			  show_pwm_enable, set_pwm_enable, 2);
1975static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 2);
1976static SENSOR_DEVICE_ATTR(pwm3_freq, S_IRUGO, show_pwm_freq, NULL, 2);
1977static SENSOR_DEVICE_ATTR(pwm3_auto_channels_temp, S_IRUGO,
1978			  show_pwm_temp_map, set_pwm_temp_map, 2);
1979static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO | S_IWUSR,
1980			    show_auto_pwm, set_auto_pwm, 2, 0);
1981static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO | S_IWUSR,
1982			    show_auto_pwm, set_auto_pwm, 2, 1);
1983static SENSOR_DEVICE_ATTR_2(pwm3_auto_point3_pwm, S_IRUGO | S_IWUSR,
1984			    show_auto_pwm, set_auto_pwm, 2, 2);
1985static SENSOR_DEVICE_ATTR_2(pwm3_auto_point4_pwm, S_IRUGO,
1986			    show_auto_pwm, NULL, 2, 3);
1987static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_temp, S_IRUGO | S_IWUSR,
1988			    show_auto_temp, set_auto_temp, 2, 1);
1989static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_temp_hyst, S_IRUGO | S_IWUSR,
1990			    show_auto_temp, set_auto_temp, 2, 0);
1991static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_temp, S_IRUGO | S_IWUSR,
1992			    show_auto_temp, set_auto_temp, 2, 2);
1993static SENSOR_DEVICE_ATTR_2(pwm3_auto_point3_temp, S_IRUGO | S_IWUSR,
1994			    show_auto_temp, set_auto_temp, 2, 3);
1995static SENSOR_DEVICE_ATTR_2(pwm3_auto_point4_temp, S_IRUGO | S_IWUSR,
1996			    show_auto_temp, set_auto_temp, 2, 4);
1997static SENSOR_DEVICE_ATTR_2(pwm3_auto_start, S_IRUGO | S_IWUSR,
1998			    show_auto_pwm, set_auto_pwm, 2, 0);
1999static SENSOR_DEVICE_ATTR(pwm3_auto_slope, S_IRUGO | S_IWUSR,
2000			  show_auto_pwm_slope, set_auto_pwm_slope, 2);
2001
2002static SENSOR_DEVICE_ATTR(pwm4_enable, S_IRUGO | S_IWUSR,
2003			  show_pwm_enable, set_pwm_enable, 3);
2004static SENSOR_DEVICE_ATTR(pwm4, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 3);
2005static SENSOR_DEVICE_ATTR(pwm4_freq, S_IRUGO, show_pwm_freq, NULL, 3);
2006static SENSOR_DEVICE_ATTR(pwm4_auto_channels_temp, S_IRUGO,
2007			  show_pwm_temp_map, set_pwm_temp_map, 3);
2008static SENSOR_DEVICE_ATTR_2(pwm4_auto_point1_temp, S_IRUGO | S_IWUSR,
2009			    show_auto_temp, set_auto_temp, 2, 1);
2010static SENSOR_DEVICE_ATTR_2(pwm4_auto_point1_temp_hyst, S_IRUGO | S_IWUSR,
2011			    show_auto_temp, set_auto_temp, 2, 0);
2012static SENSOR_DEVICE_ATTR_2(pwm4_auto_point2_temp, S_IRUGO | S_IWUSR,
2013			    show_auto_temp, set_auto_temp, 2, 2);
2014static SENSOR_DEVICE_ATTR_2(pwm4_auto_point3_temp, S_IRUGO | S_IWUSR,
2015			    show_auto_temp, set_auto_temp, 2, 3);
2016static SENSOR_DEVICE_ATTR_2(pwm4_auto_start, S_IRUGO | S_IWUSR,
2017			    show_auto_pwm, set_auto_pwm, 3, 0);
2018static SENSOR_DEVICE_ATTR(pwm4_auto_slope, S_IRUGO | S_IWUSR,
2019			  show_auto_pwm_slope, set_auto_pwm_slope, 3);
2020
2021static SENSOR_DEVICE_ATTR(pwm5_enable, S_IRUGO | S_IWUSR,
2022			  show_pwm_enable, set_pwm_enable, 4);
2023static SENSOR_DEVICE_ATTR(pwm5, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 4);
2024static SENSOR_DEVICE_ATTR(pwm5_freq, S_IRUGO, show_pwm_freq, NULL, 4);
2025static SENSOR_DEVICE_ATTR(pwm5_auto_channels_temp, S_IRUGO,
2026			  show_pwm_temp_map, set_pwm_temp_map, 4);
2027static SENSOR_DEVICE_ATTR_2(pwm5_auto_point1_temp, S_IRUGO | S_IWUSR,
2028			    show_auto_temp, set_auto_temp, 2, 1);
2029static SENSOR_DEVICE_ATTR_2(pwm5_auto_point1_temp_hyst, S_IRUGO | S_IWUSR,
2030			    show_auto_temp, set_auto_temp, 2, 0);
2031static SENSOR_DEVICE_ATTR_2(pwm5_auto_point2_temp, S_IRUGO | S_IWUSR,
2032			    show_auto_temp, set_auto_temp, 2, 2);
2033static SENSOR_DEVICE_ATTR_2(pwm5_auto_point3_temp, S_IRUGO | S_IWUSR,
2034			    show_auto_temp, set_auto_temp, 2, 3);
2035static SENSOR_DEVICE_ATTR_2(pwm5_auto_start, S_IRUGO | S_IWUSR,
2036			    show_auto_pwm, set_auto_pwm, 4, 0);
2037static SENSOR_DEVICE_ATTR(pwm5_auto_slope, S_IRUGO | S_IWUSR,
2038			  show_auto_pwm_slope, set_auto_pwm_slope, 4);
2039
2040static SENSOR_DEVICE_ATTR(pwm6_enable, S_IRUGO | S_IWUSR,
2041			  show_pwm_enable, set_pwm_enable, 5);
2042static SENSOR_DEVICE_ATTR(pwm6, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 5);
2043static SENSOR_DEVICE_ATTR(pwm6_freq, S_IRUGO, show_pwm_freq, NULL, 5);
2044static SENSOR_DEVICE_ATTR(pwm6_auto_channels_temp, S_IRUGO,
2045			  show_pwm_temp_map, set_pwm_temp_map, 5);
2046static SENSOR_DEVICE_ATTR_2(pwm6_auto_point1_temp, S_IRUGO | S_IWUSR,
2047			    show_auto_temp, set_auto_temp, 2, 1);
2048static SENSOR_DEVICE_ATTR_2(pwm6_auto_point1_temp_hyst, S_IRUGO | S_IWUSR,
2049			    show_auto_temp, set_auto_temp, 2, 0);
2050static SENSOR_DEVICE_ATTR_2(pwm6_auto_point2_temp, S_IRUGO | S_IWUSR,
2051			    show_auto_temp, set_auto_temp, 2, 2);
2052static SENSOR_DEVICE_ATTR_2(pwm6_auto_point3_temp, S_IRUGO | S_IWUSR,
2053			    show_auto_temp, set_auto_temp, 2, 3);
2054static SENSOR_DEVICE_ATTR_2(pwm6_auto_start, S_IRUGO | S_IWUSR,
2055			    show_auto_pwm, set_auto_pwm, 5, 0);
2056static SENSOR_DEVICE_ATTR(pwm6_auto_slope, S_IRUGO | S_IWUSR,
2057			  show_auto_pwm_slope, set_auto_pwm_slope, 5);
2058
2059/* Alarms */
2060static ssize_t alarms_show(struct device *dev, struct device_attribute *attr,
2061			   char *buf)
2062{
2063	struct it87_data *data = it87_update_device(dev);
2064
2065	if (IS_ERR(data))
2066		return PTR_ERR(data);
2067
2068	return sprintf(buf, "%u\n", data->alarms);
2069}
2070static DEVICE_ATTR_RO(alarms);
2071
2072static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
2073			  char *buf)
2074{
2075	struct it87_data *data = it87_update_device(dev);
2076	int bitnr = to_sensor_dev_attr(attr)->index;
2077
2078	if (IS_ERR(data))
2079		return PTR_ERR(data);
2080
2081	return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
2082}
2083
2084static ssize_t clear_intrusion(struct device *dev,
2085			       struct device_attribute *attr, const char *buf,
2086			       size_t count)
2087{
2088	struct it87_data *data = dev_get_drvdata(dev);
2089	int err, config;
2090	long val;
 
2091
2092	if (kstrtol(buf, 10, &val) < 0 || val != 0)
2093		return -EINVAL;
2094
2095	err = it87_lock(data);
2096	if (err)
2097		return err;
2098
2099	config = it87_read_value(data, IT87_REG_CONFIG);
2100	if (config < 0) {
2101		count = config;
2102	} else {
2103		config |= BIT(5);
2104		it87_write_value(data, IT87_REG_CONFIG, config);
2105		/* Invalidate cache to force re-read */
2106		data->valid = false;
2107	}
2108	it87_unlock(data);
 
2109	return count;
2110}
2111
2112static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 8);
2113static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 9);
2114static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 10);
2115static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 11);
2116static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 12);
2117static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 13);
2118static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 14);
2119static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 15);
2120static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 0);
2121static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 1);
2122static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 2);
2123static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, 3);
2124static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 6);
2125static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_alarm, NULL, 7);
2126static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 16);
2127static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 17);
2128static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 18);
2129static SENSOR_DEVICE_ATTR(intrusion0_alarm, S_IRUGO | S_IWUSR,
2130			  show_alarm, clear_intrusion, 4);
2131
2132static ssize_t show_beep(struct device *dev, struct device_attribute *attr,
2133			 char *buf)
2134{
2135	struct it87_data *data = it87_update_device(dev);
2136	int bitnr = to_sensor_dev_attr(attr)->index;
2137
2138	if (IS_ERR(data))
2139		return PTR_ERR(data);
2140
2141	return sprintf(buf, "%u\n", (data->beeps >> bitnr) & 1);
2142}
2143
2144static ssize_t set_beep(struct device *dev, struct device_attribute *attr,
2145			const char *buf, size_t count)
2146{
2147	int bitnr = to_sensor_dev_attr(attr)->index;
2148	struct it87_data *data = dev_get_drvdata(dev);
2149	long val;
2150	int err;
2151
2152	if (kstrtol(buf, 10, &val) < 0 || (val != 0 && val != 1))
 
2153		return -EINVAL;
2154
2155	err = it87_lock(data);
2156	if (err)
2157		return err;
2158
2159	data->beeps = it87_read_value(data, IT87_REG_BEEP_ENABLE);
2160	if (val)
2161		data->beeps |= BIT(bitnr);
2162	else
2163		data->beeps &= ~BIT(bitnr);
2164	it87_write_value(data, IT87_REG_BEEP_ENABLE, data->beeps);
2165	it87_unlock(data);
2166	return count;
2167}
2168
2169static SENSOR_DEVICE_ATTR(in0_beep, S_IRUGO | S_IWUSR,
2170			  show_beep, set_beep, 1);
2171static SENSOR_DEVICE_ATTR(in1_beep, S_IRUGO, show_beep, NULL, 1);
2172static SENSOR_DEVICE_ATTR(in2_beep, S_IRUGO, show_beep, NULL, 1);
2173static SENSOR_DEVICE_ATTR(in3_beep, S_IRUGO, show_beep, NULL, 1);
2174static SENSOR_DEVICE_ATTR(in4_beep, S_IRUGO, show_beep, NULL, 1);
2175static SENSOR_DEVICE_ATTR(in5_beep, S_IRUGO, show_beep, NULL, 1);
2176static SENSOR_DEVICE_ATTR(in6_beep, S_IRUGO, show_beep, NULL, 1);
2177static SENSOR_DEVICE_ATTR(in7_beep, S_IRUGO, show_beep, NULL, 1);
2178/* fanX_beep writability is set later */
2179static SENSOR_DEVICE_ATTR(fan1_beep, S_IRUGO, show_beep, set_beep, 0);
2180static SENSOR_DEVICE_ATTR(fan2_beep, S_IRUGO, show_beep, set_beep, 0);
2181static SENSOR_DEVICE_ATTR(fan3_beep, S_IRUGO, show_beep, set_beep, 0);
2182static SENSOR_DEVICE_ATTR(fan4_beep, S_IRUGO, show_beep, set_beep, 0);
2183static SENSOR_DEVICE_ATTR(fan5_beep, S_IRUGO, show_beep, set_beep, 0);
2184static SENSOR_DEVICE_ATTR(fan6_beep, S_IRUGO, show_beep, set_beep, 0);
2185static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO | S_IWUSR,
2186			  show_beep, set_beep, 2);
2187static SENSOR_DEVICE_ATTR(temp2_beep, S_IRUGO, show_beep, NULL, 2);
2188static SENSOR_DEVICE_ATTR(temp3_beep, S_IRUGO, show_beep, NULL, 2);
2189
2190static ssize_t vrm_show(struct device *dev, struct device_attribute *attr,
2191			char *buf)
2192{
2193	struct it87_data *data = dev_get_drvdata(dev);
2194
2195	return sprintf(buf, "%u\n", data->vrm);
2196}
2197
2198static ssize_t vrm_store(struct device *dev, struct device_attribute *attr,
2199			 const char *buf, size_t count)
2200{
2201	struct it87_data *data = dev_get_drvdata(dev);
2202	unsigned long val;
2203
2204	if (kstrtoul(buf, 10, &val) < 0)
2205		return -EINVAL;
2206
2207	data->vrm = val;
2208
2209	return count;
2210}
2211static DEVICE_ATTR_RW(vrm);
2212
2213static ssize_t cpu0_vid_show(struct device *dev,
2214			     struct device_attribute *attr, char *buf)
2215{
2216	struct it87_data *data = it87_update_device(dev);
2217
2218	if (IS_ERR(data))
2219		return PTR_ERR(data);
2220
2221	return sprintf(buf, "%ld\n", (long)vid_from_reg(data->vid, data->vrm));
2222}
2223static DEVICE_ATTR_RO(cpu0_vid);
2224
2225static ssize_t show_label(struct device *dev, struct device_attribute *attr,
2226			  char *buf)
2227{
2228	static const char * const labels[] = {
2229		"+5V",
2230		"5VSB",
2231		"Vbat",
2232		"AVCC",
2233	};
2234	static const char * const labels_it8721[] = {
2235		"+3.3V",
2236		"3VSB",
2237		"Vbat",
2238		"+3.3V",
2239	};
2240	struct it87_data *data = dev_get_drvdata(dev);
2241	int nr = to_sensor_dev_attr(attr)->index;
2242	const char *label;
2243
2244	if (has_vin3_5v(data) && nr == 0)
2245		label = labels[0];
2246	else if (has_scaling(data))
2247		label = labels_it8721[nr];
2248	else
2249		label = labels[nr];
2250
2251	return sprintf(buf, "%s\n", label);
 
2252}
2253static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_label, NULL, 0);
2254static SENSOR_DEVICE_ATTR(in7_label, S_IRUGO, show_label, NULL, 1);
2255static SENSOR_DEVICE_ATTR(in8_label, S_IRUGO, show_label, NULL, 2);
2256/* AVCC3 */
2257static SENSOR_DEVICE_ATTR(in9_label, S_IRUGO, show_label, NULL, 3);
2258
2259static umode_t it87_in_is_visible(struct kobject *kobj,
2260				  struct attribute *attr, int index)
2261{
2262	struct device *dev = kobj_to_dev(kobj);
2263	struct it87_data *data = dev_get_drvdata(dev);
2264	int i = index / 5;	/* voltage index */
2265	int a = index % 5;	/* attribute index */
2266
2267	if (index >= 40) {	/* in8 and higher only have input attributes */
2268		i = index - 40 + 8;
2269		a = 0;
2270	}
2271
2272	if (!(data->has_in & BIT(i)))
2273		return 0;
2274
2275	if (a == 4 && !data->has_beep)
2276		return 0;
2277
2278	return attr->mode;
2279}
 
2280
2281static struct attribute *it87_attributes_in[] = {
 
2282	&sensor_dev_attr_in0_input.dev_attr.attr,
2283	&sensor_dev_attr_in0_min.dev_attr.attr,
2284	&sensor_dev_attr_in0_max.dev_attr.attr,
2285	&sensor_dev_attr_in0_alarm.dev_attr.attr,
2286	&sensor_dev_attr_in0_beep.dev_attr.attr,	/* 4 */
2287
2288	&sensor_dev_attr_in1_input.dev_attr.attr,
2289	&sensor_dev_attr_in1_min.dev_attr.attr,
2290	&sensor_dev_attr_in1_max.dev_attr.attr,
2291	&sensor_dev_attr_in1_alarm.dev_attr.attr,
2292	&sensor_dev_attr_in1_beep.dev_attr.attr,	/* 9 */
2293
2294	&sensor_dev_attr_in2_input.dev_attr.attr,
2295	&sensor_dev_attr_in2_min.dev_attr.attr,
2296	&sensor_dev_attr_in2_max.dev_attr.attr,
2297	&sensor_dev_attr_in2_alarm.dev_attr.attr,
2298	&sensor_dev_attr_in2_beep.dev_attr.attr,	/* 14 */
2299
2300	&sensor_dev_attr_in3_input.dev_attr.attr,
2301	&sensor_dev_attr_in3_min.dev_attr.attr,
2302	&sensor_dev_attr_in3_max.dev_attr.attr,
2303	&sensor_dev_attr_in3_alarm.dev_attr.attr,
2304	&sensor_dev_attr_in3_beep.dev_attr.attr,	/* 19 */
2305
2306	&sensor_dev_attr_in4_input.dev_attr.attr,
2307	&sensor_dev_attr_in4_min.dev_attr.attr,
2308	&sensor_dev_attr_in4_max.dev_attr.attr,
2309	&sensor_dev_attr_in4_alarm.dev_attr.attr,
2310	&sensor_dev_attr_in4_beep.dev_attr.attr,	/* 24 */
2311
2312	&sensor_dev_attr_in5_input.dev_attr.attr,
2313	&sensor_dev_attr_in5_min.dev_attr.attr,
2314	&sensor_dev_attr_in5_max.dev_attr.attr,
2315	&sensor_dev_attr_in5_alarm.dev_attr.attr,
2316	&sensor_dev_attr_in5_beep.dev_attr.attr,	/* 29 */
2317
2318	&sensor_dev_attr_in6_input.dev_attr.attr,
2319	&sensor_dev_attr_in6_min.dev_attr.attr,
2320	&sensor_dev_attr_in6_max.dev_attr.attr,
2321	&sensor_dev_attr_in6_alarm.dev_attr.attr,
2322	&sensor_dev_attr_in6_beep.dev_attr.attr,	/* 34 */
2323
2324	&sensor_dev_attr_in7_input.dev_attr.attr,
2325	&sensor_dev_attr_in7_min.dev_attr.attr,
2326	&sensor_dev_attr_in7_max.dev_attr.attr,
2327	&sensor_dev_attr_in7_alarm.dev_attr.attr,
2328	&sensor_dev_attr_in7_beep.dev_attr.attr,	/* 39 */
2329
2330	&sensor_dev_attr_in8_input.dev_attr.attr,	/* 40 */
 
 
2331	&sensor_dev_attr_in9_input.dev_attr.attr,
2332	&sensor_dev_attr_in10_input.dev_attr.attr,
2333	&sensor_dev_attr_in11_input.dev_attr.attr,
2334	&sensor_dev_attr_in12_input.dev_attr.attr,
2335	NULL
2336};
2337
2338static const struct attribute_group it87_group_in = {
2339	.attrs = it87_attributes_in,
2340	.is_visible = it87_in_is_visible,
 
 
 
 
 
 
 
 
2341};
2342
2343static umode_t it87_temp_is_visible(struct kobject *kobj,
2344				    struct attribute *attr, int index)
2345{
2346	struct device *dev = kobj_to_dev(kobj);
2347	struct it87_data *data = dev_get_drvdata(dev);
2348	int i = index / 7;	/* temperature index */
2349	int a = index % 7;	/* attribute index */
2350
2351	if (index >= 21) {
2352		i = index - 21 + 3;
2353		a = 0;
2354	}
2355
2356	if (!(data->has_temp & BIT(i)))
2357		return 0;
2358
2359	if (a == 3) {
2360		if (get_temp_type(data, i) == 0)
2361			return 0;
2362		return attr->mode;
2363	}
2364
2365	if (a == 5 && !has_temp_offset(data))
2366		return 0;
2367
2368	if (a == 6 && !data->has_beep)
2369		return 0;
2370
2371	return attr->mode;
2372}
2373
2374static struct attribute *it87_attributes_temp[] = {
2375	&sensor_dev_attr_temp1_input.dev_attr.attr,
2376	&sensor_dev_attr_temp1_max.dev_attr.attr,
2377	&sensor_dev_attr_temp1_min.dev_attr.attr,
2378	&sensor_dev_attr_temp1_type.dev_attr.attr,
2379	&sensor_dev_attr_temp1_alarm.dev_attr.attr,
2380	&sensor_dev_attr_temp1_offset.dev_attr.attr,	/* 5 */
2381	&sensor_dev_attr_temp1_beep.dev_attr.attr,	/* 6 */
2382
2383	&sensor_dev_attr_temp2_input.dev_attr.attr,	/* 7 */
2384	&sensor_dev_attr_temp2_max.dev_attr.attr,
2385	&sensor_dev_attr_temp2_min.dev_attr.attr,
2386	&sensor_dev_attr_temp2_type.dev_attr.attr,
2387	&sensor_dev_attr_temp2_alarm.dev_attr.attr,
2388	&sensor_dev_attr_temp2_offset.dev_attr.attr,
2389	&sensor_dev_attr_temp2_beep.dev_attr.attr,
2390
2391	&sensor_dev_attr_temp3_input.dev_attr.attr,	/* 14 */
2392	&sensor_dev_attr_temp3_max.dev_attr.attr,
2393	&sensor_dev_attr_temp3_min.dev_attr.attr,
2394	&sensor_dev_attr_temp3_type.dev_attr.attr,
2395	&sensor_dev_attr_temp3_alarm.dev_attr.attr,
2396	&sensor_dev_attr_temp3_offset.dev_attr.attr,
2397	&sensor_dev_attr_temp3_beep.dev_attr.attr,
2398
2399	&sensor_dev_attr_temp4_input.dev_attr.attr,	/* 21 */
2400	&sensor_dev_attr_temp5_input.dev_attr.attr,
2401	&sensor_dev_attr_temp6_input.dev_attr.attr,
2402	NULL
2403};
2404
2405static const struct attribute_group it87_group_temp = {
2406	.attrs = it87_attributes_temp,
2407	.is_visible = it87_temp_is_visible,
 
2408};
2409
2410static umode_t it87_is_visible(struct kobject *kobj,
2411			       struct attribute *attr, int index)
2412{
2413	struct device *dev = kobj_to_dev(kobj);
2414	struct it87_data *data = dev_get_drvdata(dev);
2415
2416	if ((index == 2 || index == 3) && !data->has_vid)
2417		return 0;
2418
2419	if (index > 3 && !(data->in_internal & BIT(index - 4)))
2420		return 0;
2421
2422	return attr->mode;
2423}
2424
2425static struct attribute *it87_attributes[] = {
2426	&dev_attr_alarms.attr,
2427	&sensor_dev_attr_intrusion0_alarm.dev_attr.attr,
2428	&dev_attr_vrm.attr,				/* 2 */
2429	&dev_attr_cpu0_vid.attr,			/* 3 */
2430	&sensor_dev_attr_in3_label.dev_attr.attr,	/* 4 .. 7 */
2431	&sensor_dev_attr_in7_label.dev_attr.attr,
2432	&sensor_dev_attr_in8_label.dev_attr.attr,
2433	&sensor_dev_attr_in9_label.dev_attr.attr,
2434	NULL
2435};
2436
2437static const struct attribute_group it87_group = {
2438	.attrs = it87_attributes,
2439	.is_visible = it87_is_visible,
2440};
2441
2442static umode_t it87_fan_is_visible(struct kobject *kobj,
2443				   struct attribute *attr, int index)
2444{
2445	struct device *dev = kobj_to_dev(kobj);
2446	struct it87_data *data = dev_get_drvdata(dev);
2447	int i = index / 5;	/* fan index */
2448	int a = index % 5;	/* attribute index */
2449
2450	if (index >= 15) {	/* fan 4..6 don't have divisor attributes */
2451		i = (index - 15) / 4 + 3;
2452		a = (index - 15) % 4;
2453	}
2454
2455	if (!(data->has_fan & BIT(i)))
2456		return 0;
2457
2458	if (a == 3) {				/* beep */
2459		if (!data->has_beep)
2460			return 0;
2461		/* first fan beep attribute is writable */
2462		if (i == __ffs(data->has_fan))
2463			return attr->mode | S_IWUSR;
2464	}
2465
2466	if (a == 4 && has_16bit_fans(data))	/* divisor */
2467		return 0;
2468
2469	return attr->mode;
2470}
 
 
 
2471
2472static struct attribute *it87_attributes_fan[] = {
2473	&sensor_dev_attr_fan1_input.dev_attr.attr,
2474	&sensor_dev_attr_fan1_min.dev_attr.attr,
2475	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
2476	&sensor_dev_attr_fan1_beep.dev_attr.attr,	/* 3 */
2477	&sensor_dev_attr_fan1_div.dev_attr.attr,	/* 4 */
2478
2479	&sensor_dev_attr_fan2_input.dev_attr.attr,
2480	&sensor_dev_attr_fan2_min.dev_attr.attr,
2481	&sensor_dev_attr_fan2_alarm.dev_attr.attr,
2482	&sensor_dev_attr_fan2_beep.dev_attr.attr,
2483	&sensor_dev_attr_fan2_div.dev_attr.attr,	/* 9 */
2484
2485	&sensor_dev_attr_fan3_input.dev_attr.attr,
2486	&sensor_dev_attr_fan3_min.dev_attr.attr,
2487	&sensor_dev_attr_fan3_alarm.dev_attr.attr,
2488	&sensor_dev_attr_fan3_beep.dev_attr.attr,
2489	&sensor_dev_attr_fan3_div.dev_attr.attr,	/* 14 */
2490
2491	&sensor_dev_attr_fan4_input.dev_attr.attr,	/* 15 */
2492	&sensor_dev_attr_fan4_min.dev_attr.attr,
2493	&sensor_dev_attr_fan4_alarm.dev_attr.attr,
2494	&sensor_dev_attr_fan4_beep.dev_attr.attr,
2495
2496	&sensor_dev_attr_fan5_input.dev_attr.attr,	/* 19 */
2497	&sensor_dev_attr_fan5_min.dev_attr.attr,
2498	&sensor_dev_attr_fan5_alarm.dev_attr.attr,
2499	&sensor_dev_attr_fan5_beep.dev_attr.attr,
2500
2501	&sensor_dev_attr_fan6_input.dev_attr.attr,	/* 23 */
2502	&sensor_dev_attr_fan6_min.dev_attr.attr,
2503	&sensor_dev_attr_fan6_alarm.dev_attr.attr,
2504	&sensor_dev_attr_fan6_beep.dev_attr.attr,
2505	NULL
2506};
2507
2508static const struct attribute_group it87_group_fan = {
2509	.attrs = it87_attributes_fan,
2510	.is_visible = it87_fan_is_visible,
 
 
 
2511};
2512
2513static umode_t it87_pwm_is_visible(struct kobject *kobj,
2514				   struct attribute *attr, int index)
2515{
2516	struct device *dev = kobj_to_dev(kobj);
2517	struct it87_data *data = dev_get_drvdata(dev);
2518	int i = index / 4;	/* pwm index */
2519	int a = index % 4;	/* attribute index */
2520
2521	if (!(data->has_pwm & BIT(i)))
2522		return 0;
2523
2524	/* pwmX_auto_channels_temp is only writable if auto pwm is supported */
2525	if (a == 3 && (has_old_autopwm(data) || has_newer_autopwm(data)))
2526		return attr->mode | S_IWUSR;
2527
2528	/* pwm2_freq is writable if there are two pwm frequency selects */
2529	if (has_pwm_freq2(data) && i == 1 && a == 2)
2530		return attr->mode | S_IWUSR;
2531
2532	return attr->mode;
2533}
2534
2535static struct attribute *it87_attributes_pwm[] = {
2536	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
2537	&sensor_dev_attr_pwm1.dev_attr.attr,
2538	&sensor_dev_attr_pwm1_freq.dev_attr.attr,
2539	&sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
2540
 
2541	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
2542	&sensor_dev_attr_pwm2.dev_attr.attr,
2543	&sensor_dev_attr_pwm2_freq.dev_attr.attr,
2544	&sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
2545
 
2546	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
2547	&sensor_dev_attr_pwm3.dev_attr.attr,
2548	&sensor_dev_attr_pwm3_freq.dev_attr.attr,
2549	&sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr,
2550
2551	&sensor_dev_attr_pwm4_enable.dev_attr.attr,
2552	&sensor_dev_attr_pwm4.dev_attr.attr,
2553	&sensor_dev_attr_pwm4_freq.dev_attr.attr,
2554	&sensor_dev_attr_pwm4_auto_channels_temp.dev_attr.attr,
2555
2556	&sensor_dev_attr_pwm5_enable.dev_attr.attr,
2557	&sensor_dev_attr_pwm5.dev_attr.attr,
2558	&sensor_dev_attr_pwm5_freq.dev_attr.attr,
2559	&sensor_dev_attr_pwm5_auto_channels_temp.dev_attr.attr,
2560
2561	&sensor_dev_attr_pwm6_enable.dev_attr.attr,
2562	&sensor_dev_attr_pwm6.dev_attr.attr,
2563	&sensor_dev_attr_pwm6_freq.dev_attr.attr,
2564	&sensor_dev_attr_pwm6_auto_channels_temp.dev_attr.attr,
2565
2566	NULL
2567};
2568
2569static const struct attribute_group it87_group_pwm = {
2570	.attrs = it87_attributes_pwm,
2571	.is_visible = it87_pwm_is_visible,
 
2572};
2573
2574static umode_t it87_auto_pwm_is_visible(struct kobject *kobj,
2575					struct attribute *attr, int index)
2576{
2577	struct device *dev = kobj_to_dev(kobj);
2578	struct it87_data *data = dev_get_drvdata(dev);
2579	int i = index / 11;	/* pwm index */
2580	int a = index % 11;	/* attribute index */
2581
2582	if (index >= 33) {	/* pwm 4..6 */
2583		i = (index - 33) / 6 + 3;
2584		a = (index - 33) % 6 + 4;
2585	}
2586
2587	if (!(data->has_pwm & BIT(i)))
2588		return 0;
2589
2590	if (has_newer_autopwm(data)) {
2591		if (a < 4)	/* no auto point pwm */
2592			return 0;
2593		if (a == 8)	/* no auto_point4 */
2594			return 0;
2595	}
2596	if (has_old_autopwm(data)) {
2597		if (a >= 9)	/* no pwm_auto_start, pwm_auto_slope */
2598			return 0;
2599	}
2600
2601	return attr->mode;
2602}
2603
2604static struct attribute *it87_attributes_auto_pwm[] = {
2605	&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
2606	&sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
2607	&sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr,
2608	&sensor_dev_attr_pwm1_auto_point4_pwm.dev_attr.attr,
2609	&sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr,
2610	&sensor_dev_attr_pwm1_auto_point1_temp_hyst.dev_attr.attr,
2611	&sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr,
2612	&sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr,
2613	&sensor_dev_attr_pwm1_auto_point4_temp.dev_attr.attr,
2614	&sensor_dev_attr_pwm1_auto_start.dev_attr.attr,
2615	&sensor_dev_attr_pwm1_auto_slope.dev_attr.attr,
2616
2617	&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,	/* 11 */
2618	&sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
2619	&sensor_dev_attr_pwm2_auto_point3_pwm.dev_attr.attr,
2620	&sensor_dev_attr_pwm2_auto_point4_pwm.dev_attr.attr,
2621	&sensor_dev_attr_pwm2_auto_point1_temp.dev_attr.attr,
2622	&sensor_dev_attr_pwm2_auto_point1_temp_hyst.dev_attr.attr,
2623	&sensor_dev_attr_pwm2_auto_point2_temp.dev_attr.attr,
2624	&sensor_dev_attr_pwm2_auto_point3_temp.dev_attr.attr,
2625	&sensor_dev_attr_pwm2_auto_point4_temp.dev_attr.attr,
2626	&sensor_dev_attr_pwm2_auto_start.dev_attr.attr,
2627	&sensor_dev_attr_pwm2_auto_slope.dev_attr.attr,
2628
2629	&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,	/* 22 */
2630	&sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
2631	&sensor_dev_attr_pwm3_auto_point3_pwm.dev_attr.attr,
2632	&sensor_dev_attr_pwm3_auto_point4_pwm.dev_attr.attr,
2633	&sensor_dev_attr_pwm3_auto_point1_temp.dev_attr.attr,
2634	&sensor_dev_attr_pwm3_auto_point1_temp_hyst.dev_attr.attr,
2635	&sensor_dev_attr_pwm3_auto_point2_temp.dev_attr.attr,
2636	&sensor_dev_attr_pwm3_auto_point3_temp.dev_attr.attr,
2637	&sensor_dev_attr_pwm3_auto_point4_temp.dev_attr.attr,
2638	&sensor_dev_attr_pwm3_auto_start.dev_attr.attr,
2639	&sensor_dev_attr_pwm3_auto_slope.dev_attr.attr,
2640
2641	&sensor_dev_attr_pwm4_auto_point1_temp.dev_attr.attr,	/* 33 */
2642	&sensor_dev_attr_pwm4_auto_point1_temp_hyst.dev_attr.attr,
2643	&sensor_dev_attr_pwm4_auto_point2_temp.dev_attr.attr,
2644	&sensor_dev_attr_pwm4_auto_point3_temp.dev_attr.attr,
2645	&sensor_dev_attr_pwm4_auto_start.dev_attr.attr,
2646	&sensor_dev_attr_pwm4_auto_slope.dev_attr.attr,
2647
2648	&sensor_dev_attr_pwm5_auto_point1_temp.dev_attr.attr,
2649	&sensor_dev_attr_pwm5_auto_point1_temp_hyst.dev_attr.attr,
2650	&sensor_dev_attr_pwm5_auto_point2_temp.dev_attr.attr,
2651	&sensor_dev_attr_pwm5_auto_point3_temp.dev_attr.attr,
2652	&sensor_dev_attr_pwm5_auto_start.dev_attr.attr,
2653	&sensor_dev_attr_pwm5_auto_slope.dev_attr.attr,
2654
2655	&sensor_dev_attr_pwm6_auto_point1_temp.dev_attr.attr,
2656	&sensor_dev_attr_pwm6_auto_point1_temp_hyst.dev_attr.attr,
2657	&sensor_dev_attr_pwm6_auto_point2_temp.dev_attr.attr,
2658	&sensor_dev_attr_pwm6_auto_point3_temp.dev_attr.attr,
2659	&sensor_dev_attr_pwm6_auto_start.dev_attr.attr,
2660	&sensor_dev_attr_pwm6_auto_slope.dev_attr.attr,
2661
2662	NULL,
 
 
 
 
 
2663};
2664
2665static const struct attribute_group it87_group_auto_pwm = {
2666	.attrs = it87_attributes_auto_pwm,
2667	.is_visible = it87_auto_pwm_is_visible,
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2668};
2669
2670/*
2671 * Original explanation:
2672 * On various Gigabyte AM4 boards (AB350, AX370), the second Super-IO chip
2673 * (IT8792E) needs to be in configuration mode before accessing the first
2674 * due to a bug in IT8792E which otherwise results in LPC bus access errors.
2675 * This needs to be done before accessing the first Super-IO chip since
2676 * the second chip may have been accessed prior to loading this driver.
2677 *
2678 * The problem is also reported to affect IT8795E, which is used on X299 boards
2679 * and has the same chip ID as IT8792E (0x8733). It also appears to affect
2680 * systems with IT8790E, which is used on some Z97X-Gaming boards as well as
2681 * Z87X-OC.
2682 *
2683 * From other information supplied:
2684 * ChipIDs 0x8733, 0x8695 (early ID for IT87952E) and 0x8790 are initialized
2685 * and left in configuration mode, and entering and/or exiting configuration
2686 * mode is what causes the crash.
2687 *
2688 * The recommendation is to look up the chipID before doing any mode swap
2689 * and then act accordingly.
2690 */
2691/* SuperIO detection - will change isa_address if a chip is found */
2692static int __init it87_find(int sioaddr, unsigned short *address,
2693			    struct it87_sio_data *sio_data, int chip_cnt)
2694{
2695	int err;
2696	u16 chip_type;
2697	const struct it87_devices *config = NULL;
2698	bool enabled = false;
2699
2700	/* First step, lock memory but don't enter configuration mode */
2701	err = superio_enter(sioaddr, true);
2702	if (err)
2703		return err;
2704
2705	err = -ENODEV;
2706	chip_type = superio_inw(sioaddr, DEVID);
2707	/* Check for a valid chip before forcing chip id */
2708	if (chip_type == 0xffff) {
2709		/* Enter configuration mode */
2710		__superio_enter(sioaddr);
2711		enabled = true;
2712		/* and then try again */
2713		chip_type = superio_inw(sioaddr, DEVID);
2714		if (chip_type == 0xffff)
2715			goto exit;
2716	}
2717
2718	if (force_id_cnt == 1) {
2719		/* If only one value given use for all chips */
2720		if (force_id[0])
2721			chip_type = force_id[0];
2722	} else if (force_id[chip_cnt])
2723		chip_type = force_id[chip_cnt];
2724
2725	switch (chip_type) {
2726	case IT8705F_DEVID:
2727		sio_data->type = it87;
2728		break;
2729	case IT8712F_DEVID:
2730		sio_data->type = it8712;
2731		break;
2732	case IT8716F_DEVID:
2733	case IT8726F_DEVID:
2734		sio_data->type = it8716;
2735		break;
2736	case IT8718F_DEVID:
2737		sio_data->type = it8718;
2738		break;
2739	case IT8720F_DEVID:
2740		sio_data->type = it8720;
2741		break;
2742	case IT8721F_DEVID:
2743		sio_data->type = it8721;
2744		break;
2745	case IT8728F_DEVID:
2746		sio_data->type = it8728;
2747		break;
2748	case IT8732F_DEVID:
2749		sio_data->type = it8732;
2750		break;
2751	case IT8792E_DEVID:
2752		sio_data->type = it8792;
2753		break;
2754	case IT8771E_DEVID:
2755		sio_data->type = it8771;
2756		break;
2757	case IT8772E_DEVID:
2758		sio_data->type = it8772;
2759		break;
2760	case IT8781F_DEVID:
2761		sio_data->type = it8781;
2762		break;
2763	case IT8782F_DEVID:
2764		sio_data->type = it8782;
2765		break;
2766	case IT8783E_DEVID:
2767		sio_data->type = it8783;
2768		break;
2769	case IT8786E_DEVID:
2770		sio_data->type = it8786;
2771		break;
2772	case IT8790E_DEVID:
2773		sio_data->type = it8790;
2774		break;
2775	case IT8603E_DEVID:
2776	case IT8623E_DEVID:
2777		sio_data->type = it8603;
2778		break;
2779	case IT8620E_DEVID:
2780		sio_data->type = it8620;
2781		break;
2782	case IT8622E_DEVID:
2783		sio_data->type = it8622;
2784		break;
2785	case IT8628E_DEVID:
2786		sio_data->type = it8628;
2787		break;
2788	case IT87952E_DEVID:
2789		sio_data->type = it87952;
2790		break;
2791	case 0xffff:	/* No device at all */
2792		goto exit;
2793	default:
2794		pr_debug("Unsupported chip (DEVID=0x%x)\n", chip_type);
2795		goto exit;
2796	}
2797
2798	config = &it87_devices[sio_data->type];
2799
2800	/*
2801	 * If previously we didn't enter configuration mode and it isn't a
2802	 * chip we know is initialised in configuration mode, then enter
2803	 * configuration mode.
2804	 *
2805	 * I don't know if any such chips can exist but be defensive.
2806	 */
2807	if (!enabled && !has_noconf(config)) {
2808		__superio_enter(sioaddr);
2809		enabled = true;
2810	}
2811
2812	superio_select(sioaddr, PME);
2813	if (!(superio_inb(sioaddr, IT87_ACT_REG) & 0x01)) {
2814		pr_info("Device (chip %s ioreg 0x%x) not activated, skipping\n",
2815			config->model, sioaddr);
2816		goto exit;
2817	}
2818
2819	*address = superio_inw(sioaddr, IT87_BASE_REG) & ~(IT87_EXTENT - 1);
2820	if (*address == 0) {
2821		pr_info("Base address not set (chip %s ioreg 0x%x), skipping\n",
2822			config->model, sioaddr);
2823		goto exit;
2824	}
2825
2826	err = 0;
2827	sio_data->sioaddr = sioaddr;
2828	sio_data->revision = superio_inb(sioaddr, DEVREV) & 0x0f;
2829	pr_info("Found %s chip at 0x%x, revision %d\n",
2830		it87_devices[sio_data->type].model,
2831		*address, sio_data->revision);
2832
2833	/* in7 (VSB or VCCH5V) is always internal on some chips */
2834	if (has_in7_internal(config))
2835		sio_data->internal |= BIT(1);
2836
2837	/* in8 (Vbat) is always internal */
2838	sio_data->internal |= BIT(2);
2839
2840	/* in9 (AVCC3), always internal if supported */
2841	if (has_avcc3(config))
2842		sio_data->internal |= BIT(3); /* in9 is AVCC */
2843	else
2844		sio_data->skip_in |= BIT(9);
2845
2846	if (!has_four_pwm(config))
2847		sio_data->skip_pwm |= BIT(3) | BIT(4) | BIT(5);
2848	else if (!has_five_pwm(config))
2849		sio_data->skip_pwm |= BIT(4) | BIT(5);
2850	else if (!has_six_pwm(config))
2851		sio_data->skip_pwm |= BIT(5);
2852
2853	if (!has_vid(config))
2854		sio_data->skip_vid = 1;
2855
2856	/* Read GPIO config and VID value from LDN 7 (GPIO) */
2857	if (sio_data->type == it87) {
 
 
 
2858		/* The IT8705F has a different LD number for GPIO */
2859		superio_select(sioaddr, 5);
2860		sio_data->beep_pin = superio_inb(sioaddr,
2861						 IT87_SIO_BEEP_PIN_REG) & 0x3f;
2862	} else if (sio_data->type == it8783) {
2863		int reg25, reg27, reg2a, reg2c, regef;
2864
2865		superio_select(sioaddr, GPIO);
2866
2867		reg25 = superio_inb(sioaddr, IT87_SIO_GPIO1_REG);
2868		reg27 = superio_inb(sioaddr, IT87_SIO_GPIO3_REG);
2869		reg2a = superio_inb(sioaddr, IT87_SIO_PINX1_REG);
2870		reg2c = superio_inb(sioaddr, IT87_SIO_PINX2_REG);
2871		regef = superio_inb(sioaddr, IT87_SIO_SPI_REG);
 
 
2872
2873		/* Check if fan3 is there or not */
2874		if ((reg27 & BIT(0)) || !(reg2c & BIT(2)))
2875			sio_data->skip_fan |= BIT(2);
2876		if ((reg25 & BIT(4)) ||
2877		    (!(reg2a & BIT(1)) && (regef & BIT(0))))
2878			sio_data->skip_pwm |= BIT(2);
2879
2880		/* Check if fan2 is there or not */
2881		if (reg27 & BIT(7))
2882			sio_data->skip_fan |= BIT(1);
2883		if (reg27 & BIT(3))
2884			sio_data->skip_pwm |= BIT(1);
2885
2886		/* VIN5 */
2887		if ((reg27 & BIT(0)) || (reg2c & BIT(2)))
2888			sio_data->skip_in |= BIT(5); /* No VIN5 */
2889
2890		/* VIN6 */
2891		if (reg27 & BIT(1))
2892			sio_data->skip_in |= BIT(6); /* No VIN6 */
2893
2894		/*
2895		 * VIN7
2896		 * Does not depend on bit 2 of Reg2C, contrary to datasheet.
2897		 */
2898		if (reg27 & BIT(2)) {
2899			/*
2900			 * The data sheet is a bit unclear regarding the
2901			 * internal voltage divider for VCCH5V. It says
2902			 * "This bit enables and switches VIN7 (pin 91) to the
2903			 * internal voltage divider for VCCH5V".
2904			 * This is different to other chips, where the internal
2905			 * voltage divider would connect VIN7 to an internal
2906			 * voltage source. Maybe that is the case here as well.
2907			 *
2908			 * Since we don't know for sure, re-route it if that is
2909			 * not the case, and ask the user to report if the
2910			 * resulting voltage is sane.
2911			 */
2912			if (!(reg2c & BIT(1))) {
2913				reg2c |= BIT(1);
2914				superio_outb(sioaddr, IT87_SIO_PINX2_REG,
2915					     reg2c);
2916				sio_data->need_in7_reroute = true;
2917				pr_notice("Routing internal VCCH5V to in7.\n");
2918			}
2919			pr_notice("in7 routed to internal voltage divider, with external pin disabled.\n");
2920			pr_notice("Please report if it displays a reasonable voltage.\n");
2921		}
2922
2923		if (reg2c & BIT(0))
2924			sio_data->internal |= BIT(0);
2925		if (reg2c & BIT(1))
2926			sio_data->internal |= BIT(1);
2927
2928		sio_data->beep_pin = superio_inb(sioaddr,
2929						 IT87_SIO_BEEP_PIN_REG) & 0x3f;
2930	} else if (sio_data->type == it8603) {
2931		int reg27, reg29;
2932
2933		superio_select(sioaddr, GPIO);
 
2934
2935		reg27 = superio_inb(sioaddr, IT87_SIO_GPIO3_REG);
2936
2937		/* Check if fan3 is there or not */
2938		if (reg27 & BIT(6))
2939			sio_data->skip_pwm |= BIT(2);
2940		if (reg27 & BIT(7))
2941			sio_data->skip_fan |= BIT(2);
2942
2943		/* Check if fan2 is there or not */
2944		reg29 = superio_inb(sioaddr, IT87_SIO_GPIO5_REG);
2945		if (reg29 & BIT(1))
2946			sio_data->skip_pwm |= BIT(1);
2947		if (reg29 & BIT(2))
2948			sio_data->skip_fan |= BIT(1);
2949
2950		sio_data->skip_in |= BIT(5); /* No VIN5 */
2951		sio_data->skip_in |= BIT(6); /* No VIN6 */
2952
2953		sio_data->beep_pin = superio_inb(sioaddr,
2954						 IT87_SIO_BEEP_PIN_REG) & 0x3f;
2955	} else if (sio_data->type == it8620 || sio_data->type == it8628) {
2956		int reg;
2957
2958		superio_select(sioaddr, GPIO);
2959
2960		/* Check for pwm5 */
2961		reg = superio_inb(sioaddr, IT87_SIO_GPIO1_REG);
2962		if (reg & BIT(6))
2963			sio_data->skip_pwm |= BIT(4);
2964
2965		/* Check for fan4, fan5 */
2966		reg = superio_inb(sioaddr, IT87_SIO_GPIO2_REG);
2967		if (!(reg & BIT(5)))
2968			sio_data->skip_fan |= BIT(3);
2969		if (!(reg & BIT(4)))
2970			sio_data->skip_fan |= BIT(4);
2971
2972		/* Check for pwm3, fan3 */
2973		reg = superio_inb(sioaddr, IT87_SIO_GPIO3_REG);
2974		if (reg & BIT(6))
2975			sio_data->skip_pwm |= BIT(2);
2976		if (reg & BIT(7))
2977			sio_data->skip_fan |= BIT(2);
2978
2979		/* Check for pwm4 */
2980		reg = superio_inb(sioaddr, IT87_SIO_GPIO4_REG);
2981		if (reg & BIT(2))
2982			sio_data->skip_pwm |= BIT(3);
2983
2984		/* Check for pwm2, fan2 */
2985		reg = superio_inb(sioaddr, IT87_SIO_GPIO5_REG);
2986		if (reg & BIT(1))
2987			sio_data->skip_pwm |= BIT(1);
2988		if (reg & BIT(2))
2989			sio_data->skip_fan |= BIT(1);
2990		/* Check for pwm6, fan6 */
2991		if (!(reg & BIT(7))) {
2992			sio_data->skip_pwm |= BIT(5);
2993			sio_data->skip_fan |= BIT(5);
2994		}
2995
2996		/* Check if AVCC is on VIN3 */
2997		reg = superio_inb(sioaddr, IT87_SIO_PINX2_REG);
2998		if (reg & BIT(0))
2999			sio_data->internal |= BIT(0);
3000		else
3001			sio_data->skip_in |= BIT(9);
3002
3003		sio_data->beep_pin = superio_inb(sioaddr,
3004						 IT87_SIO_BEEP_PIN_REG) & 0x3f;
3005	} else if (sio_data->type == it8622) {
3006		int reg;
3007
3008		superio_select(sioaddr, GPIO);
3009
3010		/* Check for pwm4, fan4 */
3011		reg = superio_inb(sioaddr, IT87_SIO_GPIO1_REG);
3012		if (reg & BIT(6))
3013			sio_data->skip_fan |= BIT(3);
3014		if (reg & BIT(5))
3015			sio_data->skip_pwm |= BIT(3);
3016
3017		/* Check for pwm3, fan3, pwm5, fan5 */
3018		reg = superio_inb(sioaddr, IT87_SIO_GPIO3_REG);
3019		if (reg & BIT(6))
3020			sio_data->skip_pwm |= BIT(2);
3021		if (reg & BIT(7))
3022			sio_data->skip_fan |= BIT(2);
3023		if (reg & BIT(3))
3024			sio_data->skip_pwm |= BIT(4);
3025		if (reg & BIT(1))
3026			sio_data->skip_fan |= BIT(4);
3027
3028		/* Check for pwm2, fan2 */
3029		reg = superio_inb(sioaddr, IT87_SIO_GPIO5_REG);
3030		if (reg & BIT(1))
3031			sio_data->skip_pwm |= BIT(1);
3032		if (reg & BIT(2))
3033			sio_data->skip_fan |= BIT(1);
3034
3035		/* Check for AVCC */
3036		reg = superio_inb(sioaddr, IT87_SIO_PINX2_REG);
3037		if (!(reg & BIT(0)))
3038			sio_data->skip_in |= BIT(9);
3039
3040		sio_data->beep_pin = superio_inb(sioaddr,
3041						 IT87_SIO_BEEP_PIN_REG) & 0x3f;
3042	} else if (sio_data->type == it8732) {
3043		int reg;
3044
3045		superio_select(sioaddr, GPIO);
3046
3047		/* Check for pwm2, fan2 */
3048		reg = superio_inb(sioaddr, IT87_SIO_GPIO5_REG);
3049		if (reg & BIT(1))
3050			sio_data->skip_pwm |= BIT(1);
3051		if (reg & BIT(2))
3052			sio_data->skip_fan |= BIT(1);
3053
3054		/* Check for pwm3, fan3, fan4 */
3055		reg = superio_inb(sioaddr, IT87_SIO_GPIO3_REG);
3056		if (reg & BIT(6))
3057			sio_data->skip_pwm |= BIT(2);
3058		if (reg & BIT(7))
3059			sio_data->skip_fan |= BIT(2);
3060		if (reg & BIT(5))
3061			sio_data->skip_fan |= BIT(3);
3062
3063		/* Check if AVCC is on VIN3 */
3064		reg = superio_inb(sioaddr, IT87_SIO_PINX2_REG);
3065		if (reg & BIT(0))
3066			sio_data->internal |= BIT(0);
3067
3068		sio_data->beep_pin = superio_inb(sioaddr,
3069						 IT87_SIO_BEEP_PIN_REG) & 0x3f;
3070	} else {
3071		int reg;
3072		bool uart6;
3073
3074		superio_select(sioaddr, GPIO);
3075
3076		/* Check for fan4, fan5 */
3077		if (has_five_fans(config)) {
3078			reg = superio_inb(sioaddr, IT87_SIO_GPIO2_REG);
3079			switch (sio_data->type) {
3080			case it8718:
3081				if (reg & BIT(5))
3082					sio_data->skip_fan |= BIT(3);
3083				if (reg & BIT(4))
3084					sio_data->skip_fan |= BIT(4);
3085				break;
3086			case it8720:
3087			case it8721:
3088			case it8728:
3089				if (!(reg & BIT(5)))
3090					sio_data->skip_fan |= BIT(3);
3091				if (!(reg & BIT(4)))
3092					sio_data->skip_fan |= BIT(4);
3093				break;
3094			default:
3095				break;
3096			}
3097		}
3098
3099		reg = superio_inb(sioaddr, IT87_SIO_GPIO3_REG);
3100		if (!sio_data->skip_vid) {
 
 
 
 
 
 
 
 
3101			/* We need at least 4 VID pins */
3102			if (reg & 0x0f) {
3103				pr_info("VID is disabled (pins used for GPIO)\n");
3104				sio_data->skip_vid = 1;
3105			}
3106		}
3107
3108		/* Check if fan3 is there or not */
3109		if (reg & BIT(6))
3110			sio_data->skip_pwm |= BIT(2);
3111		if (reg & BIT(7))
3112			sio_data->skip_fan |= BIT(2);
3113
3114		/* Check if fan2 is there or not */
3115		reg = superio_inb(sioaddr, IT87_SIO_GPIO5_REG);
3116		if (reg & BIT(1))
3117			sio_data->skip_pwm |= BIT(1);
3118		if (reg & BIT(2))
3119			sio_data->skip_fan |= BIT(1);
3120
3121		if ((sio_data->type == it8718 || sio_data->type == it8720) &&
3122		    !(sio_data->skip_vid))
3123			sio_data->vid_value = superio_inb(sioaddr,
3124							  IT87_SIO_VID_REG);
3125
3126		reg = superio_inb(sioaddr, IT87_SIO_PINX2_REG);
3127
3128		uart6 = sio_data->type == it8782 && (reg & BIT(2));
3129
3130		/*
3131		 * The IT8720F has no VIN7 pin, so VCCH5V should always be
3132		 * routed internally to VIN7 with an internal divider.
3133		 * Curiously, there still is a configuration bit to control
3134		 * this, which means it can be set incorrectly. And even
3135		 * more curiously, many boards out there are improperly
3136		 * configured, even though the IT8720F datasheet claims
3137		 * that the internal routing of VCCH5V to VIN7 is the default
3138		 * setting. So we force the internal routing in this case.
3139		 *
3140		 * On IT8782F, VIN7 is multiplexed with one of the UART6 pins.
3141		 * If UART6 is enabled, re-route VIN7 to the internal divider
3142		 * if that is not already the case.
3143		 */
3144		if ((sio_data->type == it8720 || uart6) && !(reg & BIT(1))) {
3145			reg |= BIT(1);
3146			superio_outb(sioaddr, IT87_SIO_PINX2_REG, reg);
3147			sio_data->need_in7_reroute = true;
3148			pr_notice("Routing internal VCCH5V to in7\n");
3149		}
3150		if (reg & BIT(0))
3151			sio_data->internal |= BIT(0);
3152		if (reg & BIT(1))
3153			sio_data->internal |= BIT(1);
 
 
3154
3155		/*
3156		 * On IT8782F, UART6 pins overlap with VIN5, VIN6, and VIN7.
3157		 * While VIN7 can be routed to the internal voltage divider,
3158		 * VIN5 and VIN6 are not available if UART6 is enabled.
3159		 *
3160		 * Also, temp3 is not available if UART6 is enabled and TEMPIN3
3161		 * is the temperature source. Since we can not read the
3162		 * temperature source here, skip_temp is preliminary.
3163		 */
3164		if (uart6) {
3165			sio_data->skip_in |= BIT(5) | BIT(6);
3166			sio_data->skip_temp |= BIT(2);
3167		}
3168
3169		sio_data->beep_pin = superio_inb(sioaddr,
3170						 IT87_SIO_BEEP_PIN_REG) & 0x3f;
3171	}
3172	if (sio_data->beep_pin)
3173		pr_info("Beeping is supported\n");
3174
3175	/* Set values based on DMI matches */
3176	if (dmi_data)
3177		sio_data->skip_pwm |= dmi_data->skip_pwm;
3178
3179	if (config->smbus_bitmap) {
3180		u8 reg;
3181
3182		superio_select(sioaddr, PME);
3183		reg = superio_inb(sioaddr, IT87_SPECIAL_CFG_REG);
3184		sio_data->ec_special_config = reg;
3185		sio_data->smbus_bitmap = reg & config->smbus_bitmap;
 
 
 
 
 
 
3186	}
3187
3188exit:
3189	superio_exit(sioaddr, !enabled);
3190	return err;
3191}
3192
3193/*
3194 * Some chips seem to have default value 0xff for all limit
3195 * registers. For low voltage limits it makes no sense and triggers
3196 * alarms, so change to 0 instead. For high temperature limits, it
3197 * means -1 degree C, which surprisingly doesn't trigger an alarm,
3198 * but is still confusing, so change to 127 degrees C.
3199 */
3200static void it87_check_limit_regs(struct it87_data *data)
3201{
3202	int i, reg;
 
 
3203
3204	for (i = 0; i < NUM_VIN_LIMIT; i++) {
3205		reg = it87_read_value(data, IT87_REG_VIN_MIN(i));
3206		if (reg == 0xff)
3207			it87_write_value(data, IT87_REG_VIN_MIN(i), 0);
 
 
 
 
3208	}
3209	for (i = 0; i < NUM_TEMP_LIMIT; i++) {
3210		reg = it87_read_value(data, IT87_REG_TEMP_HIGH(i));
3211		if (reg == 0xff)
3212			it87_write_value(data, IT87_REG_TEMP_HIGH(i), 127);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
3213	}
 
 
 
 
 
 
 
 
 
 
 
3214}
3215
3216/* Check if voltage monitors are reset manually or by some reason */
3217static void it87_check_voltage_monitors_reset(struct it87_data *data)
3218{
3219	int reg;
 
 
 
 
 
 
3220
3221	reg = it87_read_value(data, IT87_REG_VIN_ENABLE);
3222	if ((reg & 0xff) == 0) {
3223		/* Enable all voltage monitors */
3224		it87_write_value(data, IT87_REG_VIN_ENABLE, 0xff);
 
 
 
3225	}
3226}
3227
3228/* Check if tachometers are reset manually or by some reason */
3229static void it87_check_tachometers_reset(struct platform_device *pdev)
3230{
3231	struct it87_sio_data *sio_data = dev_get_platdata(&pdev->dev);
3232	struct it87_data *data = platform_get_drvdata(pdev);
3233	u8 mask, fan_main_ctrl;
3234
3235	mask = 0x70 & ~(sio_data->skip_fan << 4);
3236	fan_main_ctrl = it87_read_value(data, IT87_REG_FAN_MAIN_CTRL);
3237	if ((fan_main_ctrl & mask) == 0) {
3238		/* Enable all fan tachometers */
3239		fan_main_ctrl |= mask;
3240		it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
3241				 fan_main_ctrl);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
3242	}
3243}
3244
3245/* Set tachometers to 16-bit mode if needed */
3246static void it87_check_tachometers_16bit_mode(struct platform_device *pdev)
3247{
3248	struct it87_data *data = platform_get_drvdata(pdev);
3249	int reg;
3250
3251	if (!has_fan16_config(data))
3252		return;
 
3253
3254	reg = it87_read_value(data, IT87_REG_FAN_16BIT);
3255	if (~reg & 0x07 & data->has_fan) {
3256		dev_dbg(&pdev->dev,
3257			"Setting fan1-3 to 16-bit mode\n");
3258		it87_write_value(data, IT87_REG_FAN_16BIT,
3259				 reg | 0x07);
 
 
 
 
 
 
 
 
 
 
 
 
3260	}
3261}
3262
3263static void it87_start_monitoring(struct it87_data *data)
3264{
3265	it87_write_value(data, IT87_REG_CONFIG,
3266			 (it87_read_value(data, IT87_REG_CONFIG) & 0x3e)
3267			 | (update_vbat ? 0x41 : 0x01));
3268}
3269
3270/* Called when we have found a new IT87. */
3271static void it87_init_device(struct platform_device *pdev)
3272{
3273	struct it87_sio_data *sio_data = dev_get_platdata(&pdev->dev);
3274	struct it87_data *data = platform_get_drvdata(pdev);
3275	int tmp, i;
3276
3277	/*
3278	 * For each PWM channel:
3279	 * - If it is in automatic mode, setting to manual mode should set
3280	 *   the fan to full speed by default.
3281	 * - If it is in manual mode, we need a mapping to temperature
3282	 *   channels to use when later setting to automatic mode later.
3283	 *   Use a 1:1 mapping by default (we are clueless.)
3284	 * In both cases, the value can (and should) be changed by the user
3285	 * prior to switching to a different mode.
3286	 * Note that this is no longer needed for the IT8721F and later, as
3287	 * these have separate registers for the temperature mapping and the
3288	 * manual duty cycle.
3289	 */
3290	for (i = 0; i < NUM_AUTO_PWM; i++) {
3291		data->pwm_temp_map[i] = i;
3292		data->pwm_duty[i] = 0x7f;	/* Full speed */
3293		data->auto_pwm[i][3] = 0x7f;	/* Full speed, hard-coded */
3294	}
3295
3296	it87_check_limit_regs(data);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
3297
3298	/*
3299	 * Temperature channels are not forcibly enabled, as they can be
3300	 * set to two different sensor types and we can't guess which one
3301	 * is correct for a given system. These channels can be enabled at
3302	 * run-time through the temp{1-3}_type sysfs accessors if needed.
3303	 */
 
 
3304
3305	it87_check_voltage_monitors_reset(data);
 
 
 
 
 
3306
3307	it87_check_tachometers_reset(pdev);
 
 
 
 
 
 
3308
3309	data->fan_main_ctrl = it87_read_value(data, IT87_REG_FAN_MAIN_CTRL);
3310	data->has_fan = (data->fan_main_ctrl >> 4) & 0x07;
 
 
 
 
 
 
 
 
 
 
 
3311
3312	it87_check_tachometers_16bit_mode(pdev);
 
 
 
 
 
 
 
3313
3314	/* Check for additional fans */
3315	tmp = it87_read_value(data, IT87_REG_FAN_16BIT);
 
 
 
 
 
 
3316
3317	if (has_four_fans(data) && (tmp & BIT(4)))
3318		data->has_fan |= BIT(3); /* fan4 enabled */
3319	if (has_five_fans(data) && (tmp & BIT(5)))
3320		data->has_fan |= BIT(4); /* fan5 enabled */
3321	if (has_six_fans(data) && (tmp & BIT(2)))
3322		data->has_fan |= BIT(5); /* fan6 enabled */
 
 
3323
3324	/* Fan input pins may be used for alternative functions */
3325	data->has_fan &= ~sio_data->skip_fan;
 
 
 
 
 
 
 
3326
3327	/* Check if pwm5, pwm6 are enabled */
3328	if (has_six_pwm(data)) {
3329		/* The following code may be IT8620E specific */
3330		tmp = it87_read_value(data, IT87_REG_FAN_DIV);
3331		if ((tmp & 0xc0) == 0xc0)
3332			sio_data->skip_pwm |= BIT(4);
3333		if (!(tmp & BIT(3)))
3334			sio_data->skip_pwm |= BIT(5);
3335	}
3336
3337	it87_start_monitoring(data);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
3338}
3339
3340/* Return 1 if and only if the PWM interface is safe to use */
3341static int it87_check_pwm(struct device *dev)
3342{
3343	struct it87_data *data = dev_get_drvdata(dev);
3344	/*
3345	 * Some BIOSes fail to correctly configure the IT87 fans. All fans off
3346	 * and polarity set to active low is sign that this is the case so we
3347	 * disable pwm control to protect the user.
3348	 */
3349	int tmp = it87_read_value(data, IT87_REG_FAN_CTL);
3350
3351	if ((tmp & 0x87) == 0) {
3352		if (fix_pwm_polarity) {
3353			/*
3354			 * The user asks us to attempt a chip reconfiguration.
3355			 * This means switching to active high polarity and
3356			 * inverting all fan speed values.
3357			 */
3358			int i;
3359			u8 pwm[3];
3360
3361			for (i = 0; i < ARRAY_SIZE(pwm); i++)
3362				pwm[i] = it87_read_value(data,
3363							 IT87_REG_PWM[i]);
3364
3365			/*
3366			 * If any fan is in automatic pwm mode, the polarity
3367			 * might be correct, as suspicious as it seems, so we
3368			 * better don't change anything (but still disable the
3369			 * PWM interface).
3370			 */
3371			if (!((pwm[0] | pwm[1] | pwm[2]) & 0x80)) {
3372				dev_info(dev,
3373					 "Reconfiguring PWM to active high polarity\n");
3374				it87_write_value(data, IT87_REG_FAN_CTL,
3375						 tmp | 0x87);
3376				for (i = 0; i < 3; i++)
3377					it87_write_value(data,
3378							 IT87_REG_PWM[i],
3379							 0x7f & ~pwm[i]);
3380				return 1;
3381			}
3382
3383			dev_info(dev,
3384				 "PWM configuration is too broken to be fixed\n");
3385		}
3386
 
 
3387		return 0;
3388	} else if (fix_pwm_polarity) {
3389		dev_info(dev,
3390			 "PWM configuration looks sane, won't touch\n");
3391	}
3392
3393	return 1;
3394}
3395
3396static int it87_probe(struct platform_device *pdev)
 
3397{
3398	struct it87_data *data;
3399	struct resource *res;
3400	struct device *dev = &pdev->dev;
3401	struct it87_sio_data *sio_data = dev_get_platdata(dev);
3402	int enable_pwm_interface;
3403	struct device *hwmon_dev;
3404	int err;
3405
3406	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
3407	if (!devm_request_region(&pdev->dev, res->start, IT87_EC_EXTENT,
3408				 DRVNAME)) {
3409		dev_err(dev, "Failed to request region 0x%lx-0x%lx\n",
3410			(unsigned long)res->start,
3411			(unsigned long)(res->start + IT87_EC_EXTENT - 1));
3412		return -EBUSY;
 
 
 
 
 
 
 
 
 
 
3413	}
3414
3415	data = devm_kzalloc(&pdev->dev, sizeof(struct it87_data), GFP_KERNEL);
3416	if (!data)
3417		return -ENOMEM;
3418
3419	data->addr = res->start;
3420	data->sioaddr = sio_data->sioaddr;
3421	data->type = sio_data->type;
3422	data->smbus_bitmap = sio_data->smbus_bitmap;
3423	data->ec_special_config = sio_data->ec_special_config;
3424	data->features = it87_devices[sio_data->type].features;
3425	data->peci_mask = it87_devices[sio_data->type].peci_mask;
3426	data->old_peci_mask = it87_devices[sio_data->type].old_peci_mask;
3427	/*
3428	 * IT8705F Datasheet 0.4.1, 3h == Version G.
3429	 * IT8712F Datasheet 0.9.1, section 8.3.5 indicates 8h == Version J.
3430	 * These are the first revisions with 16-bit tachometer support.
 
 
3431	 */
3432	switch (data->type) {
3433	case it87:
3434		if (sio_data->revision >= 0x03) {
3435			data->features &= ~FEAT_OLD_AUTOPWM;
3436			data->features |= FEAT_FAN16_CONFIG | FEAT_16BIT_FANS;
3437		}
3438		break;
3439	case it8712:
3440		if (sio_data->revision >= 0x08) {
3441			data->features &= ~FEAT_OLD_AUTOPWM;
3442			data->features |= FEAT_FAN16_CONFIG | FEAT_16BIT_FANS |
3443					  FEAT_FIVE_FANS;
3444		}
3445		break;
3446	default:
3447		break;
3448	}
3449
3450	platform_set_drvdata(pdev, data);
3451
3452	mutex_init(&data->update_lock);
3453
3454	err = smbus_disable(data);
3455	if (err)
3456		return err;
3457
3458	/* Now, we do the remaining detection. */
3459	if ((it87_read_value(data, IT87_REG_CONFIG) & 0x80) ||
3460	    it87_read_value(data, IT87_REG_CHIPID) != 0x90) {
3461		smbus_enable(data);
3462		return -ENODEV;
3463	}
3464
3465	/* Check PWM configuration */
3466	enable_pwm_interface = it87_check_pwm(dev);
3467	if (!enable_pwm_interface)
3468		dev_info(dev,
3469			 "Detected broken BIOS defaults, disabling PWM interface\n");
 
3470
3471	/* Starting with IT8721F, we handle scaling of internal voltages */
3472	if (has_scaling(data)) {
3473		if (sio_data->internal & BIT(0))
3474			data->in_scaled |= BIT(3);	/* in3 is AVCC */
3475		if (sio_data->internal & BIT(1))
3476			data->in_scaled |= BIT(7);	/* in7 is VSB */
3477		if (sio_data->internal & BIT(2))
3478			data->in_scaled |= BIT(8);	/* in8 is Vbat */
3479		if (sio_data->internal & BIT(3))
3480			data->in_scaled |= BIT(9);	/* in9 is AVCC */
3481	} else if (sio_data->type == it8781 || sio_data->type == it8782 ||
3482		   sio_data->type == it8783) {
3483		if (sio_data->internal & BIT(0))
3484			data->in_scaled |= BIT(3);	/* in3 is VCC5V */
3485		if (sio_data->internal & BIT(1))
3486			data->in_scaled |= BIT(7);	/* in7 is VCCH5V */
3487	}
3488
3489	data->has_temp = 0x07;
3490	if (sio_data->skip_temp & BIT(2)) {
3491		if (sio_data->type == it8782 &&
3492		    !(it87_read_value(data, IT87_REG_TEMP_EXTRA) & 0x80))
3493			data->has_temp &= ~BIT(2);
3494	}
3495
3496	data->in_internal = sio_data->internal;
3497	data->need_in7_reroute = sio_data->need_in7_reroute;
3498	data->has_in = 0x3ff & ~sio_data->skip_in;
3499
3500	if (has_four_temp(data)) {
3501		data->has_temp |= BIT(3);
3502	} else if (has_six_temp(data)) {
3503		u8 reg = it87_read_value(data, IT87_REG_TEMP456_ENABLE);
3504
3505		/* Check for additional temperature sensors */
3506		if ((reg & 0x03) >= 0x02)
3507			data->has_temp |= BIT(3);
3508		if (((reg >> 2) & 0x03) >= 0x02)
3509			data->has_temp |= BIT(4);
3510		if (((reg >> 4) & 0x03) >= 0x02)
3511			data->has_temp |= BIT(5);
3512
3513		/* Check for additional voltage sensors */
3514		if ((reg & 0x03) == 0x01)
3515			data->has_in |= BIT(10);
3516		if (((reg >> 2) & 0x03) == 0x01)
3517			data->has_in |= BIT(11);
3518		if (((reg >> 4) & 0x03) == 0x01)
3519			data->has_in |= BIT(12);
3520	}
 
3521
3522	data->has_beep = !!sio_data->beep_pin;
3523
3524	/* Initialize the IT87 chip */
3525	it87_init_device(pdev);
3526
3527	smbus_enable(data);
3528
3529	if (!sio_data->skip_vid) {
3530		data->has_vid = true;
3531		data->vrm = vid_which_vrm();
3532		/* VID reading from Super-I/O config space if available */
3533		data->vid = sio_data->vid_value;
 
 
 
 
 
 
3534	}
3535
3536	/* Prepare for sysfs hooks */
3537	data->groups[0] = &it87_group;
3538	data->groups[1] = &it87_group_in;
3539	data->groups[2] = &it87_group_temp;
3540	data->groups[3] = &it87_group_fan;
3541
3542	if (enable_pwm_interface) {
3543		data->has_pwm = BIT(ARRAY_SIZE(IT87_REG_PWM)) - 1;
3544		data->has_pwm &= ~sio_data->skip_pwm;
3545
3546		data->groups[4] = &it87_group_pwm;
3547		if (has_old_autopwm(data) || has_newer_autopwm(data))
3548			data->groups[5] = &it87_group_auto_pwm;
3549	}
3550
3551	hwmon_dev = devm_hwmon_device_register_with_groups(dev,
3552					it87_devices[sio_data->type].name,
3553					data, data->groups);
3554	return PTR_ERR_OR_ZERO(hwmon_dev);
3555}
3556
3557static void it87_resume_sio(struct platform_device *pdev)
3558{
3559	struct it87_data *data = dev_get_drvdata(&pdev->dev);
3560	int err;
3561	int reg2c;
3562
3563	if (!data->need_in7_reroute)
3564		return;
3565
3566	err = superio_enter(data->sioaddr, has_noconf(data));
3567	if (err) {
3568		dev_warn(&pdev->dev,
3569			 "Unable to enter Super I/O to reroute in7 (%d)",
3570			 err);
3571		return;
3572	}
3573
3574	superio_select(data->sioaddr, GPIO);
3575
3576	reg2c = superio_inb(data->sioaddr, IT87_SIO_PINX2_REG);
3577	if (!(reg2c & BIT(1))) {
3578		dev_dbg(&pdev->dev,
3579			"Routing internal VCCH5V to in7 again");
3580
3581		reg2c |= BIT(1);
3582		superio_outb(data->sioaddr, IT87_SIO_PINX2_REG,
3583			     reg2c);
 
 
 
3584	}
3585
3586	superio_exit(data->sioaddr, has_noconf(data));
3587}
3588
3589static int it87_resume(struct device *dev)
3590{
3591	struct platform_device *pdev = to_platform_device(dev);
3592	struct it87_data *data = dev_get_drvdata(dev);
 
3593
3594	it87_resume_sio(pdev);
3595
3596	it87_lock(data);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
3597
3598	it87_check_pwm(dev);
3599	it87_check_limit_regs(data);
3600	it87_check_voltage_monitors_reset(data);
3601	it87_check_tachometers_reset(pdev);
3602	it87_check_tachometers_16bit_mode(pdev);
3603
3604	it87_start_monitoring(data);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
3605
3606	/* force update */
3607	data->valid = false;
 
 
 
 
 
3608
3609	it87_unlock(data);
 
 
 
 
3610
3611	it87_update_device(dev);
 
 
 
 
3612
3613	return 0;
3614}
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
3615
3616static DEFINE_SIMPLE_DEV_PM_OPS(it87_dev_pm_ops, NULL, it87_resume);
3617
3618static struct platform_driver it87_driver = {
3619	.driver = {
3620		.name	= DRVNAME,
3621		.pm     = pm_sleep_ptr(&it87_dev_pm_ops),
3622	},
3623	.probe	= it87_probe,
3624};
3625
3626static int __init it87_device_add(int index, unsigned short address,
3627				  const struct it87_sio_data *sio_data)
3628{
3629	struct platform_device *pdev;
3630	struct resource res = {
3631		.start	= address + IT87_EC_OFFSET,
3632		.end	= address + IT87_EC_OFFSET + IT87_EC_EXTENT - 1,
3633		.name	= DRVNAME,
3634		.flags	= IORESOURCE_IO,
3635	};
3636	int err;
3637
3638	err = acpi_check_resource_conflict(&res);
3639	if (err) {
3640		if (!ignore_resource_conflict)
3641			return err;
3642	}
3643
3644	pdev = platform_device_alloc(DRVNAME, address);
3645	if (!pdev)
3646		return -ENOMEM;
 
 
 
3647
3648	err = platform_device_add_resources(pdev, &res, 1);
3649	if (err) {
3650		pr_err("Device resource addition failed (%d)\n", err);
3651		goto exit_device_put;
3652	}
3653
3654	err = platform_device_add_data(pdev, sio_data,
3655				       sizeof(struct it87_sio_data));
3656	if (err) {
3657		pr_err("Platform data allocation failed\n");
3658		goto exit_device_put;
3659	}
3660
3661	err = platform_device_add(pdev);
3662	if (err) {
3663		pr_err("Device addition failed (%d)\n", err);
3664		goto exit_device_put;
3665	}
3666
3667	it87_pdev[index] = pdev;
3668	return 0;
3669
3670exit_device_put:
3671	platform_device_put(pdev);
 
3672	return err;
3673}
3674
3675/* callback function for DMI */
3676static int it87_dmi_cb(const struct dmi_system_id *dmi_entry)
3677{
3678	dmi_data = dmi_entry->driver_data;
3679
3680	if (dmi_data && dmi_data->skip_pwm)
3681		pr_info("Disabling pwm2 due to hardware constraints\n");
3682
3683	return 1;
3684}
3685
3686/*
3687 * On the Shuttle SN68PT, FAN_CTL2 is apparently not
3688 * connected to a fan, but to something else. One user
3689 * has reported instant system power-off when changing
3690 * the PWM2 duty cycle, so we disable it.
3691 * I use the board name string as the trigger in case
3692 * the same board is ever used in other systems.
3693 */
3694static struct it87_dmi_data nvidia_fn68pt = {
3695	.skip_pwm = BIT(1),
3696};
3697
3698#define IT87_DMI_MATCH_VND(vendor, name, cb, data) \
3699	{ \
3700		.callback = cb, \
3701		.matches = { \
3702			DMI_EXACT_MATCH(DMI_BOARD_VENDOR, vendor), \
3703			DMI_EXACT_MATCH(DMI_BOARD_NAME, name), \
3704		}, \
3705		.driver_data = data, \
3706	}
3707
3708static const struct dmi_system_id it87_dmi_table[] __initconst = {
3709	IT87_DMI_MATCH_VND("nVIDIA", "FN68PT", it87_dmi_cb, &nvidia_fn68pt),
3710	{ }
3711
3712};
3713MODULE_DEVICE_TABLE(dmi, it87_dmi_table);
3714
3715static int __init sm_it87_init(void)
3716{
3717	int sioaddr[2] = { REG_2E, REG_4E };
 
3718	struct it87_sio_data sio_data;
3719	unsigned short isa_address[2];
3720	bool found = false;
3721	int i, err;
3722
 
 
 
 
3723	err = platform_driver_register(&it87_driver);
3724	if (err)
3725		return err;
3726
3727	dmi_check_system(it87_dmi_table);
3728
3729	for (i = 0; i < ARRAY_SIZE(sioaddr); i++) {
3730		memset(&sio_data, 0, sizeof(struct it87_sio_data));
3731		isa_address[i] = 0;
3732		err = it87_find(sioaddr[i], &isa_address[i], &sio_data, i);
3733		if (err || isa_address[i] == 0)
3734			continue;
3735		/*
3736		 * Don't register second chip if its ISA address matches
3737		 * the first chip's ISA address.
3738		 */
3739		if (i && isa_address[i] == isa_address[0])
3740			break;
3741
3742		err = it87_device_add(i, isa_address[i], &sio_data);
3743		if (err)
3744			goto exit_dev_unregister;
3745
3746		found = true;
3747
3748		/*
3749		 * IT8705F may respond on both SIO addresses.
3750		 * Stop probing after finding one.
3751		 */
3752		if (sio_data.type == it87)
3753			break;
3754	}
3755
3756	if (!found) {
3757		err = -ENODEV;
3758		goto exit_unregister;
3759	}
3760	return 0;
3761
3762exit_dev_unregister:
3763	/* NULL check handled by platform_device_unregister */
3764	platform_device_unregister(it87_pdev[0]);
3765exit_unregister:
3766	platform_driver_unregister(&it87_driver);
3767	return err;
3768}
3769
3770static void __exit sm_it87_exit(void)
3771{
3772	/* NULL check handled by platform_device_unregister */
3773	platform_device_unregister(it87_pdev[1]);
3774	platform_device_unregister(it87_pdev[0]);
3775	platform_driver_unregister(&it87_driver);
3776}
3777
 
3778MODULE_AUTHOR("Chris Gauthron, Jean Delvare <jdelvare@suse.de>");
3779MODULE_DESCRIPTION("IT8705F/IT871xF/IT872xF hardware monitoring driver");
3780
3781module_param_array(force_id, ushort, &force_id_cnt, 0);
3782MODULE_PARM_DESC(force_id, "Override one or more detected device ID(s)");
3783
3784module_param(ignore_resource_conflict, bool, 0);
3785MODULE_PARM_DESC(ignore_resource_conflict, "Ignore ACPI resource conflict");
3786
3787module_param(update_vbat, bool, 0);
3788MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value");
3789
3790module_param(fix_pwm_polarity, bool, 0);
3791MODULE_PARM_DESC(fix_pwm_polarity,
3792		 "Force PWM polarity to active high (DANGEROUS)");
3793
3794MODULE_LICENSE("GPL");
3795
3796module_init(sm_it87_init);
3797module_exit(sm_it87_exit);