Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * linux/arch/arm/mach-pxa/pxa25x.c
4 *
5 * Author: Nicolas Pitre
6 * Created: Jun 15, 2001
7 * Copyright: MontaVista Software Inc.
8 *
9 * Code specific to PXA21x/25x/26x variants.
10 *
11 * Since this file should be linked before any other machine specific file,
12 * the __initcall() here will be executed first. This serves as default
13 * initialization stuff for PXA machines which can be overridden later if
14 * need be.
15 */
16#include <linux/dmaengine.h>
17#include <linux/dma/pxa-dma.h>
18#include <linux/gpio.h>
19#include <linux/gpio-pxa.h>
20#include <linux/module.h>
21#include <linux/kernel.h>
22#include <linux/init.h>
23#include <linux/platform_device.h>
24#include <linux/suspend.h>
25#include <linux/syscore_ops.h>
26#include <linux/irq.h>
27#include <linux/irqchip.h>
28#include <linux/platform_data/mmp_dma.h>
29#include <linux/soc/pxa/cpu.h>
30#include <linux/soc/pxa/smemc.h>
31
32#include <asm/mach/map.h>
33#include <asm/suspend.h>
34#include "irqs.h"
35#include "pxa25x.h"
36#include "reset.h"
37#include "pm.h"
38#include "addr-map.h"
39#include "smemc.h"
40
41#include "generic.h"
42#include "devices.h"
43
44/*
45 * Various clock factors driven by the CCCR register.
46 */
47
48#ifdef CONFIG_PM
49
50#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
51#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
52
53/*
54 * List of global PXA peripheral registers to preserve.
55 * More ones like CP and general purpose register values are preserved
56 * with the stack pointer in sleep.S.
57 */
58enum {
59 SLEEP_SAVE_PSTR,
60 SLEEP_SAVE_COUNT
61};
62
63
64static void pxa25x_cpu_pm_save(unsigned long *sleep_save)
65{
66 SAVE(PSTR);
67}
68
69static void pxa25x_cpu_pm_restore(unsigned long *sleep_save)
70{
71 RESTORE(PSTR);
72}
73
74static void pxa25x_cpu_pm_enter(suspend_state_t state)
75{
76 /* Clear reset status */
77 RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
78
79 switch (state) {
80 case PM_SUSPEND_MEM:
81 cpu_suspend(PWRMODE_SLEEP, pxa25x_finish_suspend);
82 break;
83 }
84}
85
86static int pxa25x_cpu_pm_prepare(void)
87{
88 /* set resume return address */
89 PSPR = __pa_symbol(cpu_resume);
90 return 0;
91}
92
93static void pxa25x_cpu_pm_finish(void)
94{
95 /* ensure not to come back here if it wasn't intended */
96 PSPR = 0;
97}
98
99static struct pxa_cpu_pm_fns pxa25x_cpu_pm_fns = {
100 .save_count = SLEEP_SAVE_COUNT,
101 .valid = suspend_valid_only_mem,
102 .save = pxa25x_cpu_pm_save,
103 .restore = pxa25x_cpu_pm_restore,
104 .enter = pxa25x_cpu_pm_enter,
105 .prepare = pxa25x_cpu_pm_prepare,
106 .finish = pxa25x_cpu_pm_finish,
107};
108
109static void __init pxa25x_init_pm(void)
110{
111 pxa_cpu_pm_fns = &pxa25x_cpu_pm_fns;
112}
113#else
114static inline void pxa25x_init_pm(void) {}
115#endif
116
117/* PXA25x: supports wakeup from GPIO0..GPIO15 and RTC alarm
118 */
119
120static int pxa25x_set_wake(struct irq_data *d, unsigned int on)
121{
122 int gpio = pxa_irq_to_gpio(d->irq);
123 uint32_t mask = 0;
124
125 if (gpio >= 0 && gpio < 85)
126 return gpio_set_wake(gpio, on);
127
128 if (d->irq == IRQ_RTCAlrm) {
129 mask = PWER_RTC;
130 goto set_pwer;
131 }
132
133 return -EINVAL;
134
135set_pwer:
136 if (on)
137 PWER |= mask;
138 else
139 PWER &=~mask;
140
141 return 0;
142}
143
144void __init pxa25x_init_irq(void)
145{
146 pxa_init_irq(32, pxa25x_set_wake);
147 set_handle_irq(pxa25x_handle_irq);
148}
149
150static int __init __init
151pxa25x_dt_init_irq(struct device_node *node, struct device_node *parent)
152{
153 pxa_dt_irq_init(pxa25x_set_wake);
154 set_handle_irq(icip_handle_irq);
155
156 return 0;
157}
158IRQCHIP_DECLARE(pxa25x_intc, "marvell,pxa-intc", pxa25x_dt_init_irq);
159
160static struct map_desc pxa25x_io_desc[] __initdata = {
161 { /* Mem Ctl */
162 .virtual = (unsigned long)SMEMC_VIRT,
163 .pfn = __phys_to_pfn(PXA2XX_SMEMC_BASE),
164 .length = SMEMC_SIZE,
165 .type = MT_DEVICE
166 }, { /* UNCACHED_PHYS_0 */
167 .virtual = UNCACHED_PHYS_0,
168 .pfn = __phys_to_pfn(0x00000000),
169 .length = UNCACHED_PHYS_0_SIZE,
170 .type = MT_DEVICE
171 },
172};
173
174void __init pxa25x_map_io(void)
175{
176 pxa_map_io();
177 iotable_init(ARRAY_AND_SIZE(pxa25x_io_desc));
178 pxa25x_get_clk_frequency_khz(1);
179}
180
181static struct platform_device *pxa25x_devices[] __initdata = {
182 &pxa25x_device_gpio,
183 &pxa25x_device_udc,
184 &pxa_device_pmu,
185 &pxa_device_i2s,
186 &sa1100_device_rtc,
187 &pxa25x_device_ssp,
188 &pxa25x_device_nssp,
189 &pxa25x_device_assp,
190 &pxa25x_device_pwm0,
191 &pxa25x_device_pwm1,
192 &pxa_device_asoc_platform,
193};
194
195static const struct dma_slave_map pxa25x_slave_map[] = {
196 /* PXA25x, PXA27x and PXA3xx common entries */
197 { "pxa2xx-ac97", "pcm_pcm_mic_mono", PDMA_FILTER_PARAM(LOWEST, 8) },
198 { "pxa2xx-ac97", "pcm_pcm_aux_mono_in", PDMA_FILTER_PARAM(LOWEST, 9) },
199 { "pxa2xx-ac97", "pcm_pcm_aux_mono_out",
200 PDMA_FILTER_PARAM(LOWEST, 10) },
201 { "pxa2xx-ac97", "pcm_pcm_stereo_in", PDMA_FILTER_PARAM(LOWEST, 11) },
202 { "pxa2xx-ac97", "pcm_pcm_stereo_out", PDMA_FILTER_PARAM(LOWEST, 12) },
203 { "pxa-ssp-dai.1", "rx", PDMA_FILTER_PARAM(LOWEST, 13) },
204 { "pxa-ssp-dai.1", "tx", PDMA_FILTER_PARAM(LOWEST, 14) },
205 { "pxa-ssp-dai.2", "rx", PDMA_FILTER_PARAM(LOWEST, 15) },
206 { "pxa-ssp-dai.2", "tx", PDMA_FILTER_PARAM(LOWEST, 16) },
207 { "pxa2xx-ir", "rx", PDMA_FILTER_PARAM(LOWEST, 17) },
208 { "pxa2xx-ir", "tx", PDMA_FILTER_PARAM(LOWEST, 18) },
209 { "pxa2xx-mci.0", "rx", PDMA_FILTER_PARAM(LOWEST, 21) },
210 { "pxa2xx-mci.0", "tx", PDMA_FILTER_PARAM(LOWEST, 22) },
211
212 /* PXA25x specific map */
213 { "pxa25x-ssp.0", "rx", PDMA_FILTER_PARAM(LOWEST, 13) },
214 { "pxa25x-ssp.0", "tx", PDMA_FILTER_PARAM(LOWEST, 14) },
215 { "pxa25x-nssp.1", "rx", PDMA_FILTER_PARAM(LOWEST, 15) },
216 { "pxa25x-nssp.1", "tx", PDMA_FILTER_PARAM(LOWEST, 16) },
217 { "pxa25x-nssp.2", "rx", PDMA_FILTER_PARAM(LOWEST, 23) },
218 { "pxa25x-nssp.2", "tx", PDMA_FILTER_PARAM(LOWEST, 24) },
219};
220
221static struct mmp_dma_platdata pxa25x_dma_pdata = {
222 .dma_channels = 16,
223 .nb_requestors = 40,
224 .slave_map = pxa25x_slave_map,
225 .slave_map_cnt = ARRAY_SIZE(pxa25x_slave_map),
226};
227
228static int __init pxa25x_init(void)
229{
230 int ret = 0;
231
232 if (cpu_is_pxa25x()) {
233
234 pxa_register_wdt(RCSR);
235
236 pxa25x_init_pm();
237
238 register_syscore_ops(&pxa_irq_syscore_ops);
239 register_syscore_ops(&pxa2xx_mfp_syscore_ops);
240
241 if (!of_have_populated_dt()) {
242 software_node_register(&pxa2xx_gpiochip_node);
243 pxa2xx_set_dmac_info(&pxa25x_dma_pdata);
244 ret = platform_add_devices(pxa25x_devices,
245 ARRAY_SIZE(pxa25x_devices));
246 }
247 }
248
249 return ret;
250}
251
252postcore_initcall(pxa25x_init);
1/*
2 * linux/arch/arm/mach-pxa/pxa25x.c
3 *
4 * Author: Nicolas Pitre
5 * Created: Jun 15, 2001
6 * Copyright: MontaVista Software Inc.
7 *
8 * Code specific to PXA21x/25x/26x variants.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13 *
14 * Since this file should be linked before any other machine specific file,
15 * the __initcall() here will be executed first. This serves as default
16 * initialization stuff for PXA machines which can be overridden later if
17 * need be.
18 */
19#include <linux/gpio.h>
20#include <linux/gpio-pxa.h>
21#include <linux/module.h>
22#include <linux/kernel.h>
23#include <linux/init.h>
24#include <linux/platform_device.h>
25#include <linux/suspend.h>
26#include <linux/syscore_ops.h>
27#include <linux/irq.h>
28
29#include <asm/mach/map.h>
30#include <asm/suspend.h>
31#include <mach/hardware.h>
32#include <mach/irqs.h>
33#include <mach/pxa25x.h>
34#include <mach/reset.h>
35#include <mach/pm.h>
36#include <mach/dma.h>
37#include <mach/smemc.h>
38
39#include "generic.h"
40#include "devices.h"
41#include "clock.h"
42
43/*
44 * Various clock factors driven by the CCCR register.
45 */
46
47/* Crystal Frequency to Memory Frequency Multiplier (L) */
48static unsigned char L_clk_mult[32] = { 0, 27, 32, 36, 40, 45, 0, };
49
50/* Memory Frequency to Run Mode Frequency Multiplier (M) */
51static unsigned char M_clk_mult[4] = { 0, 1, 2, 4 };
52
53/* Run Mode Frequency to Turbo Mode Frequency Multiplier (N) */
54/* Note: we store the value N * 2 here. */
55static unsigned char N2_clk_mult[8] = { 0, 0, 2, 3, 4, 0, 6, 0 };
56
57/* Crystal clock */
58#define BASE_CLK 3686400
59
60/*
61 * Get the clock frequency as reflected by CCCR and the turbo flag.
62 * We assume these values have been applied via a fcs.
63 * If info is not 0 we also display the current settings.
64 */
65unsigned int pxa25x_get_clk_frequency_khz(int info)
66{
67 unsigned long cccr, turbo;
68 unsigned int l, L, m, M, n2, N;
69
70 cccr = CCCR;
71 asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (turbo) );
72
73 l = L_clk_mult[(cccr >> 0) & 0x1f];
74 m = M_clk_mult[(cccr >> 5) & 0x03];
75 n2 = N2_clk_mult[(cccr >> 7) & 0x07];
76
77 L = l * BASE_CLK;
78 M = m * L;
79 N = n2 * M / 2;
80
81 if(info)
82 {
83 L += 5000;
84 printk( KERN_INFO "Memory clock: %d.%02dMHz (*%d)\n",
85 L / 1000000, (L % 1000000) / 10000, l );
86 M += 5000;
87 printk( KERN_INFO "Run Mode clock: %d.%02dMHz (*%d)\n",
88 M / 1000000, (M % 1000000) / 10000, m );
89 N += 5000;
90 printk( KERN_INFO "Turbo Mode clock: %d.%02dMHz (*%d.%d, %sactive)\n",
91 N / 1000000, (N % 1000000) / 10000, n2 / 2, (n2 % 2) * 5,
92 (turbo & 1) ? "" : "in" );
93 }
94
95 return (turbo & 1) ? (N/1000) : (M/1000);
96}
97
98static unsigned long clk_pxa25x_mem_getrate(struct clk *clk)
99{
100 return L_clk_mult[(CCCR >> 0) & 0x1f] * BASE_CLK;
101}
102
103static const struct clkops clk_pxa25x_mem_ops = {
104 .enable = clk_dummy_enable,
105 .disable = clk_dummy_disable,
106 .getrate = clk_pxa25x_mem_getrate,
107};
108
109static const struct clkops clk_pxa25x_lcd_ops = {
110 .enable = clk_pxa2xx_cken_enable,
111 .disable = clk_pxa2xx_cken_disable,
112 .getrate = clk_pxa25x_mem_getrate,
113};
114
115static unsigned long gpio12_config_32k[] = {
116 GPIO12_32KHz,
117};
118
119static unsigned long gpio12_config_gpio[] = {
120 GPIO12_GPIO,
121};
122
123static void clk_gpio12_enable(struct clk *clk)
124{
125 pxa2xx_mfp_config(gpio12_config_32k, 1);
126}
127
128static void clk_gpio12_disable(struct clk *clk)
129{
130 pxa2xx_mfp_config(gpio12_config_gpio, 1);
131}
132
133static const struct clkops clk_pxa25x_gpio12_ops = {
134 .enable = clk_gpio12_enable,
135 .disable = clk_gpio12_disable,
136};
137
138static unsigned long gpio11_config_3m6[] = {
139 GPIO11_3_6MHz,
140};
141
142static unsigned long gpio11_config_gpio[] = {
143 GPIO11_GPIO,
144};
145
146static void clk_gpio11_enable(struct clk *clk)
147{
148 pxa2xx_mfp_config(gpio11_config_3m6, 1);
149}
150
151static void clk_gpio11_disable(struct clk *clk)
152{
153 pxa2xx_mfp_config(gpio11_config_gpio, 1);
154}
155
156static const struct clkops clk_pxa25x_gpio11_ops = {
157 .enable = clk_gpio11_enable,
158 .disable = clk_gpio11_disable,
159};
160
161/*
162 * 3.6864MHz -> OST, GPIO, SSP, PWM, PLLs (95.842MHz, 147.456MHz)
163 * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz
164 * 147.456MHz -> UART 14.7456MHz, AC97 12.288MHz, I2S 5.672MHz (allegedly)
165 */
166
167/*
168 * PXA 2xx clock declarations.
169 */
170static DEFINE_PXA2_CKEN(pxa25x_hwuart, HWUART, 14745600, 1);
171static DEFINE_PXA2_CKEN(pxa25x_ffuart, FFUART, 14745600, 1);
172static DEFINE_PXA2_CKEN(pxa25x_btuart, BTUART, 14745600, 1);
173static DEFINE_PXA2_CKEN(pxa25x_stuart, STUART, 14745600, 1);
174static DEFINE_PXA2_CKEN(pxa25x_usb, USB, 47923000, 5);
175static DEFINE_PXA2_CKEN(pxa25x_mmc, MMC, 19169000, 0);
176static DEFINE_PXA2_CKEN(pxa25x_i2c, I2C, 31949000, 0);
177static DEFINE_PXA2_CKEN(pxa25x_ssp, SSP, 3686400, 0);
178static DEFINE_PXA2_CKEN(pxa25x_nssp, NSSP, 3686400, 0);
179static DEFINE_PXA2_CKEN(pxa25x_assp, ASSP, 3686400, 0);
180static DEFINE_PXA2_CKEN(pxa25x_pwm0, PWM0, 3686400, 0);
181static DEFINE_PXA2_CKEN(pxa25x_pwm1, PWM1, 3686400, 0);
182static DEFINE_PXA2_CKEN(pxa25x_ac97, AC97, 24576000, 0);
183static DEFINE_PXA2_CKEN(pxa25x_i2s, I2S, 14745600, 0);
184static DEFINE_PXA2_CKEN(pxa25x_ficp, FICP, 47923000, 0);
185
186static DEFINE_CK(pxa25x_lcd, LCD, &clk_pxa25x_lcd_ops);
187static DEFINE_CLK(pxa25x_gpio11, &clk_pxa25x_gpio11_ops, 3686400, 0);
188static DEFINE_CLK(pxa25x_gpio12, &clk_pxa25x_gpio12_ops, 32768, 0);
189static DEFINE_CLK(pxa25x_mem, &clk_pxa25x_mem_ops, 0, 0);
190
191static struct clk_lookup pxa25x_clkregs[] = {
192 INIT_CLKREG(&clk_pxa25x_lcd, "pxa2xx-fb", NULL),
193 INIT_CLKREG(&clk_pxa25x_ffuart, "pxa2xx-uart.0", NULL),
194 INIT_CLKREG(&clk_pxa25x_btuart, "pxa2xx-uart.1", NULL),
195 INIT_CLKREG(&clk_pxa25x_stuart, "pxa2xx-uart.2", NULL),
196 INIT_CLKREG(&clk_pxa25x_usb, "pxa25x-udc", NULL),
197 INIT_CLKREG(&clk_pxa25x_mmc, "pxa2xx-mci.0", NULL),
198 INIT_CLKREG(&clk_pxa25x_i2c, "pxa2xx-i2c.0", NULL),
199 INIT_CLKREG(&clk_pxa25x_ssp, "pxa25x-ssp.0", NULL),
200 INIT_CLKREG(&clk_pxa25x_nssp, "pxa25x-nssp.1", NULL),
201 INIT_CLKREG(&clk_pxa25x_assp, "pxa25x-nssp.2", NULL),
202 INIT_CLKREG(&clk_pxa25x_pwm0, "pxa25x-pwm.0", NULL),
203 INIT_CLKREG(&clk_pxa25x_pwm1, "pxa25x-pwm.1", NULL),
204 INIT_CLKREG(&clk_pxa25x_i2s, "pxa2xx-i2s", NULL),
205 INIT_CLKREG(&clk_pxa25x_stuart, "pxa2xx-ir", "UARTCLK"),
206 INIT_CLKREG(&clk_pxa25x_ficp, "pxa2xx-ir", "FICPCLK"),
207 INIT_CLKREG(&clk_pxa25x_ac97, NULL, "AC97CLK"),
208 INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
209 INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
210 INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
211#ifdef CONFIG_CPU_PXA26x
212 INIT_CLKREG(&clk_dummy, "pxa26x-gpio", NULL),
213#else
214 INIT_CLKREG(&clk_dummy, "pxa25x-gpio", NULL),
215#endif
216 INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
217};
218
219static struct clk_lookup pxa25x_hwuart_clkreg =
220 INIT_CLKREG(&clk_pxa25x_hwuart, "pxa2xx-uart.3", NULL);
221
222#ifdef CONFIG_PM
223
224#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
225#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
226
227/*
228 * List of global PXA peripheral registers to preserve.
229 * More ones like CP and general purpose register values are preserved
230 * with the stack pointer in sleep.S.
231 */
232enum {
233 SLEEP_SAVE_PSTR,
234 SLEEP_SAVE_COUNT
235};
236
237
238static void pxa25x_cpu_pm_save(unsigned long *sleep_save)
239{
240 SAVE(PSTR);
241}
242
243static void pxa25x_cpu_pm_restore(unsigned long *sleep_save)
244{
245 RESTORE(PSTR);
246}
247
248static void pxa25x_cpu_pm_enter(suspend_state_t state)
249{
250 /* Clear reset status */
251 RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
252
253 switch (state) {
254 case PM_SUSPEND_MEM:
255 cpu_suspend(PWRMODE_SLEEP, pxa25x_finish_suspend);
256 break;
257 }
258}
259
260static int pxa25x_cpu_pm_prepare(void)
261{
262 /* set resume return address */
263 PSPR = virt_to_phys(cpu_resume);
264 return 0;
265}
266
267static void pxa25x_cpu_pm_finish(void)
268{
269 /* ensure not to come back here if it wasn't intended */
270 PSPR = 0;
271}
272
273static struct pxa_cpu_pm_fns pxa25x_cpu_pm_fns = {
274 .save_count = SLEEP_SAVE_COUNT,
275 .valid = suspend_valid_only_mem,
276 .save = pxa25x_cpu_pm_save,
277 .restore = pxa25x_cpu_pm_restore,
278 .enter = pxa25x_cpu_pm_enter,
279 .prepare = pxa25x_cpu_pm_prepare,
280 .finish = pxa25x_cpu_pm_finish,
281};
282
283static void __init pxa25x_init_pm(void)
284{
285 pxa_cpu_pm_fns = &pxa25x_cpu_pm_fns;
286}
287#else
288static inline void pxa25x_init_pm(void) {}
289#endif
290
291/* PXA25x: supports wakeup from GPIO0..GPIO15 and RTC alarm
292 */
293
294static int pxa25x_set_wake(struct irq_data *d, unsigned int on)
295{
296 int gpio = pxa_irq_to_gpio(d->irq);
297 uint32_t mask = 0;
298
299 if (gpio >= 0 && gpio < 85)
300 return gpio_set_wake(gpio, on);
301
302 if (d->irq == IRQ_RTCAlrm) {
303 mask = PWER_RTC;
304 goto set_pwer;
305 }
306
307 return -EINVAL;
308
309set_pwer:
310 if (on)
311 PWER |= mask;
312 else
313 PWER &=~mask;
314
315 return 0;
316}
317
318void __init pxa25x_init_irq(void)
319{
320 pxa_init_irq(32, pxa25x_set_wake);
321}
322
323#ifdef CONFIG_CPU_PXA26x
324void __init pxa26x_init_irq(void)
325{
326 pxa_init_irq(32, pxa25x_set_wake);
327}
328#endif
329
330static struct map_desc pxa25x_io_desc[] __initdata = {
331 { /* Mem Ctl */
332 .virtual = (unsigned long)SMEMC_VIRT,
333 .pfn = __phys_to_pfn(PXA2XX_SMEMC_BASE),
334 .length = 0x00200000,
335 .type = MT_DEVICE
336 },
337};
338
339void __init pxa25x_map_io(void)
340{
341 pxa_map_io();
342 iotable_init(ARRAY_AND_SIZE(pxa25x_io_desc));
343 pxa25x_get_clk_frequency_khz(1);
344}
345
346static struct pxa_gpio_platform_data pxa25x_gpio_info __initdata = {
347 .irq_base = PXA_GPIO_TO_IRQ(0),
348 .gpio_set_wake = gpio_set_wake,
349};
350
351static struct platform_device *pxa25x_devices[] __initdata = {
352 &pxa25x_device_udc,
353 &pxa_device_pmu,
354 &pxa_device_i2s,
355 &sa1100_device_rtc,
356 &pxa25x_device_ssp,
357 &pxa25x_device_nssp,
358 &pxa25x_device_assp,
359 &pxa25x_device_pwm0,
360 &pxa25x_device_pwm1,
361 &pxa_device_asoc_platform,
362};
363
364static int __init pxa25x_init(void)
365{
366 int ret = 0;
367
368 if (cpu_is_pxa25x()) {
369
370 reset_status = RCSR;
371
372 clkdev_add_table(pxa25x_clkregs, ARRAY_SIZE(pxa25x_clkregs));
373
374 if ((ret = pxa_init_dma(IRQ_DMA, 16)))
375 return ret;
376
377 pxa25x_init_pm();
378
379 register_syscore_ops(&pxa_irq_syscore_ops);
380 register_syscore_ops(&pxa2xx_mfp_syscore_ops);
381 register_syscore_ops(&pxa2xx_clock_syscore_ops);
382
383 pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info);
384 ret = platform_add_devices(pxa25x_devices,
385 ARRAY_SIZE(pxa25x_devices));
386 if (ret)
387 return ret;
388 }
389
390 /* Only add HWUART for PXA255/26x; PXA210/250 do not have it. */
391 if (cpu_is_pxa255())
392 clkdev_add(&pxa25x_hwuart_clkreg);
393
394 return ret;
395}
396
397postcore_initcall(pxa25x_init);