1/*
 2 * Copyright 2013 Freescale Semiconductor, Inc.
 3 *
 4 * Author: Fabio Estevam <fabio.estevam@freescale.com>
 5 *
 6 * This program is free software; you can redistribute it and/or modify
 7 * it under the terms of the GNU General Public License version 2 as
 8 * published by the Free Software Foundation.
 9 *
10 */
11
12/dts-v1/;
13#include "imx6q.dtsi"
14
15/ {
16	model = "Udoo i.MX6 Quad Board";
17	compatible = "udoo,imx6q-udoo", "fsl,imx6q";
18
19	memory {
20		reg = <0x10000000 0x40000000>;
21	};
22};
23
24&fec {
25	pinctrl-names = "default";
26	pinctrl-0 = <&pinctrl_enet>;
27	phy-mode = "rgmii";
28	status = "okay";
29};
30
31&iomuxc {
32	imx6q-udoo {
33		pinctrl_enet: enetgrp {
34			fsl,pins = <
35				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
36				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
37				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
38				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
39				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
40				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
41				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
42				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
43				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
44				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
45				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
46				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
47				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
48				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
49				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
50				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
51			>;
52		};
53
54		pinctrl_uart2: uart2grp {
55			fsl,pins = <
56				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
57				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
58			>;
59		};
60
61		pinctrl_usdhc3: usdhc3grp {
62			fsl,pins = <
63				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
64				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
65				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
66				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
67				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
68				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
69			>;
70		};
71	};
72};
73
74&sata {
75	status = "okay";
76};
77
78&uart2 {
79	pinctrl-names = "default";
80	pinctrl-0 = <&pinctrl_uart2>;
81	status = "okay";
82};
83
84&usdhc3 {
85	pinctrl-names = "default";
86	pinctrl-0 = <&pinctrl_usdhc3>;
87	non-removable;
88	status = "okay";
89};