Linux Audio

Check our new training course

Yocto / OpenEmbedded training

Feb 10-13, 2025
Register
Loading...
Note: File does not exist in v3.1.
  1/* SPDX-License-Identifier: GPL-2.0-or-later */
  2/*
  3 * drivers/net/bond/bond_options.h - bonding options
  4 * Copyright (c) 2013 Nikolay Aleksandrov <nikolay@redhat.com>
  5 */
  6
  7#ifndef _NET_BOND_OPTIONS_H
  8#define _NET_BOND_OPTIONS_H
  9
 10#include <linux/bits.h>
 11#include <linux/limits.h>
 12#include <linux/types.h>
 13#include <linux/string.h>
 14
 15struct netlink_ext_ack;
 16struct nlattr;
 17
 18#define BOND_OPT_MAX_NAMELEN 32
 19#define BOND_OPT_VALID(opt) ((opt) < BOND_OPT_LAST)
 20#define BOND_MODE_ALL_EX(x) (~(x))
 21
 22/* Option flags:
 23 * BOND_OPTFLAG_NOSLAVES - check if the bond device is empty before setting
 24 * BOND_OPTFLAG_IFDOWN - check if the bond device is down before setting
 25 * BOND_OPTFLAG_RAWVAL - the option parses the value itself
 26 */
 27enum {
 28	BOND_OPTFLAG_NOSLAVES	= BIT(0),
 29	BOND_OPTFLAG_IFDOWN	= BIT(1),
 30	BOND_OPTFLAG_RAWVAL	= BIT(2)
 31};
 32
 33/* Value type flags:
 34 * BOND_VALFLAG_DEFAULT - mark the value as default
 35 * BOND_VALFLAG_(MIN|MAX) - mark the value as min/max
 36 */
 37enum {
 38	BOND_VALFLAG_DEFAULT	= BIT(0),
 39	BOND_VALFLAG_MIN	= BIT(1),
 40	BOND_VALFLAG_MAX	= BIT(2)
 41};
 42
 43/* Option IDs, their bit positions correspond to their IDs */
 44enum {
 45	BOND_OPT_MODE,
 46	BOND_OPT_PACKETS_PER_SLAVE,
 47	BOND_OPT_XMIT_HASH,
 48	BOND_OPT_ARP_VALIDATE,
 49	BOND_OPT_ARP_ALL_TARGETS,
 50	BOND_OPT_FAIL_OVER_MAC,
 51	BOND_OPT_ARP_INTERVAL,
 52	BOND_OPT_ARP_TARGETS,
 53	BOND_OPT_DOWNDELAY,
 54	BOND_OPT_UPDELAY,
 55	BOND_OPT_LACP_RATE,
 56	BOND_OPT_MINLINKS,
 57	BOND_OPT_AD_SELECT,
 58	BOND_OPT_NUM_PEER_NOTIF,
 59	BOND_OPT_MIIMON,
 60	BOND_OPT_PRIMARY,
 61	BOND_OPT_PRIMARY_RESELECT,
 62	BOND_OPT_USE_CARRIER,
 63	BOND_OPT_ACTIVE_SLAVE,
 64	BOND_OPT_QUEUE_ID,
 65	BOND_OPT_ALL_SLAVES_ACTIVE,
 66	BOND_OPT_RESEND_IGMP,
 67	BOND_OPT_LP_INTERVAL,
 68	BOND_OPT_SLAVES,
 69	BOND_OPT_TLB_DYNAMIC_LB,
 70	BOND_OPT_AD_ACTOR_SYS_PRIO,
 71	BOND_OPT_AD_ACTOR_SYSTEM,
 72	BOND_OPT_AD_USER_PORT_KEY,
 73	BOND_OPT_NUM_PEER_NOTIF_ALIAS,
 74	BOND_OPT_PEER_NOTIF_DELAY,
 75	BOND_OPT_LACP_ACTIVE,
 76	BOND_OPT_MISSED_MAX,
 77	BOND_OPT_NS_TARGETS,
 78	BOND_OPT_PRIO,
 79	BOND_OPT_COUPLED_CONTROL,
 80	BOND_OPT_LAST
 81};
 82
 83/* This structure is used for storing option values and for passing option
 84 * values when changing an option. The logic when used as an arg is as follows:
 85 * - if value != ULLONG_MAX -> parse value
 86 * - if string != NULL -> parse string
 87 * - if the opt is RAW data and length less than maxlen,
 88 *   copy the data to extra storage
 89 */
 90
 91#define BOND_OPT_EXTRA_MAXLEN 16
 92struct bond_opt_value {
 93	char *string;
 94	u64 value;
 95	u32 flags;
 96	union {
 97		char extra[BOND_OPT_EXTRA_MAXLEN];
 98		struct net_device *slave_dev;
 99	};
100};
101
102struct bonding;
103
104struct bond_option {
105	int id;
106	const char *name;
107	const char *desc;
108	u32 flags;
109
110	/* unsuppmodes is used to denote modes in which the option isn't
111	 * supported.
112	 */
113	unsigned long unsuppmodes;
114	/* supported values which this option can have, can be a subset of
115	 * BOND_OPTVAL_RANGE's value range
116	 */
117	const struct bond_opt_value *values;
118
119	int (*set)(struct bonding *bond, const struct bond_opt_value *val);
120};
121
122int __bond_opt_set(struct bonding *bond, unsigned int option,
123		   struct bond_opt_value *val,
124		   struct nlattr *bad_attr, struct netlink_ext_ack *extack);
125int __bond_opt_set_notify(struct bonding *bond, unsigned int option,
126			  struct bond_opt_value *val);
127int bond_opt_tryset_rtnl(struct bonding *bond, unsigned int option, char *buf);
128
129const struct bond_opt_value *bond_opt_parse(const struct bond_option *opt,
130					    struct bond_opt_value *val);
131const struct bond_option *bond_opt_get(unsigned int option);
132const struct bond_option *bond_opt_get_by_name(const char *name);
133const struct bond_opt_value *bond_opt_get_val(unsigned int option, u64 val);
134
135/* This helper is used to initialize a bond_opt_value structure for parameter
136 * passing. There should be either a valid string or value, but not both.
137 * When value is ULLONG_MAX then string will be used.
138 */
139static inline void __bond_opt_init(struct bond_opt_value *optval,
140				   char *string, u64 value,
141				   void *extra, size_t extra_len)
142{
143	memset(optval, 0, sizeof(*optval));
144	optval->value = ULLONG_MAX;
145	if (value != ULLONG_MAX)
146		optval->value = value;
147	else if (string)
148		optval->string = string;
149
150	if (extra && extra_len <= BOND_OPT_EXTRA_MAXLEN)
151		memcpy(optval->extra, extra, extra_len);
152}
153#define bond_opt_initval(optval, value) __bond_opt_init(optval, NULL, value, NULL, 0)
154#define bond_opt_initstr(optval, str) __bond_opt_init(optval, str, ULLONG_MAX, NULL, 0)
155#define bond_opt_initextra(optval, extra, extra_len) \
156	__bond_opt_init(optval, NULL, ULLONG_MAX, extra, extra_len)
157#define bond_opt_slave_initval(optval, slave_dev, value) \
158	__bond_opt_init(optval, NULL, value, slave_dev, sizeof(struct net_device *))
159
160void bond_option_arp_ip_targets_clear(struct bonding *bond);
161#if IS_ENABLED(CONFIG_IPV6)
162void bond_option_ns_ip6_targets_clear(struct bonding *bond);
163#endif
164void bond_slave_ns_maddrs_add(struct bonding *bond, struct slave *slave);
165void bond_slave_ns_maddrs_del(struct bonding *bond, struct slave *slave);
166
167#endif /* _NET_BOND_OPTIONS_H */