Loading...
Note: File does not exist in v6.13.7.
1/*
2 * P1010si Device Tree Source
3 *
4 * Copyright 2011 Freescale Semiconductor Inc.
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
10 */
11
12/dts-v1/;
13/ {
14 compatible = "fsl,P1010";
15 #address-cells = <2>;
16 #size-cells = <2>;
17
18 cpus {
19 #address-cells = <1>;
20 #size-cells = <0>;
21
22 PowerPC,P1010@0 {
23 device_type = "cpu";
24 reg = <0x0>;
25 next-level-cache = <&L2>;
26 };
27 };
28
29 ifc@ffe1e000 {
30 #address-cells = <2>;
31 #size-cells = <1>;
32 compatible = "fsl,ifc", "simple-bus";
33 reg = <0x0 0xffe1e000 0 0x2000>;
34 interrupts = <16 2 19 2>;
35 interrupt-parent = <&mpic>;
36 };
37
38 soc@ffe00000 {
39 #address-cells = <1>;
40 #size-cells = <1>;
41 device_type = "soc";
42 compatible = "fsl,p1010-immr", "simple-bus";
43 ranges = <0x0 0x0 0xffe00000 0x100000>;
44 bus-frequency = <0>; // Filled out by uboot.
45
46 ecm-law@0 {
47 compatible = "fsl,ecm-law";
48 reg = <0x0 0x1000>;
49 fsl,num-laws = <12>;
50 };
51
52 ecm@1000 {
53 compatible = "fsl,p1010-ecm", "fsl,ecm";
54 reg = <0x1000 0x1000>;
55 interrupts = <16 2>;
56 interrupt-parent = <&mpic>;
57 };
58
59 memory-controller@2000 {
60 compatible = "fsl,p1010-memory-controller";
61 reg = <0x2000 0x1000>;
62 interrupt-parent = <&mpic>;
63 interrupts = <16 2>;
64 };
65
66 i2c@3000 {
67 #address-cells = <1>;
68 #size-cells = <0>;
69 cell-index = <0>;
70 compatible = "fsl-i2c";
71 reg = <0x3000 0x100>;
72 interrupts = <43 2>;
73 interrupt-parent = <&mpic>;
74 dfsrr;
75 };
76
77 i2c@3100 {
78 #address-cells = <1>;
79 #size-cells = <0>;
80 cell-index = <1>;
81 compatible = "fsl-i2c";
82 reg = <0x3100 0x100>;
83 interrupts = <43 2>;
84 interrupt-parent = <&mpic>;
85 dfsrr;
86 };
87
88 serial0: serial@4500 {
89 cell-index = <0>;
90 device_type = "serial";
91 compatible = "ns16550";
92 reg = <0x4500 0x100>;
93 clock-frequency = <0>;
94 interrupts = <42 2>;
95 interrupt-parent = <&mpic>;
96 };
97
98 serial1: serial@4600 {
99 cell-index = <1>;
100 device_type = "serial";
101 compatible = "ns16550";
102 reg = <0x4600 0x100>;
103 clock-frequency = <0>;
104 interrupts = <42 2>;
105 interrupt-parent = <&mpic>;
106 };
107
108 spi@7000 {
109 #address-cells = <1>;
110 #size-cells = <0>;
111 compatible = "fsl,mpc8536-espi";
112 reg = <0x7000 0x1000>;
113 interrupts = <59 0x2>;
114 interrupt-parent = <&mpic>;
115 fsl,espi-num-chipselects = <1>;
116 };
117
118 gpio: gpio-controller@f000 {
119 #gpio-cells = <2>;
120 compatible = "fsl,mpc8572-gpio";
121 reg = <0xf000 0x100>;
122 interrupts = <47 0x2>;
123 interrupt-parent = <&mpic>;
124 gpio-controller;
125 };
126
127 sata@18000 {
128 compatible = "fsl,pq-sata-v2";
129 reg = <0x18000 0x1000>;
130 cell-index = <1>;
131 interrupts = <74 0x2>;
132 interrupt-parent = <&mpic>;
133 };
134
135 sata@19000 {
136 compatible = "fsl,pq-sata-v2";
137 reg = <0x19000 0x1000>;
138 cell-index = <2>;
139 interrupts = <41 0x2>;
140 interrupt-parent = <&mpic>;
141 };
142
143 can0@1c000 {
144 compatible = "fsl,flexcan-v1.0";
145 reg = <0x1c000 0x1000>;
146 interrupts = <48 0x2>;
147 interrupt-parent = <&mpic>;
148 fsl,flexcan-clock-divider = <2>;
149 };
150
151 can1@1d000 {
152 compatible = "fsl,flexcan-v1.0";
153 reg = <0x1d000 0x1000>;
154 interrupts = <61 0x2>;
155 interrupt-parent = <&mpic>;
156 fsl,flexcan-clock-divider = <2>;
157 };
158
159 L2: l2-cache-controller@20000 {
160 compatible = "fsl,p1010-l2-cache-controller",
161 "fsl,p1014-l2-cache-controller";
162 reg = <0x20000 0x1000>;
163 cache-line-size = <32>; // 32 bytes
164 cache-size = <0x40000>; // L2,256K
165 interrupt-parent = <&mpic>;
166 interrupts = <16 2>;
167 };
168
169 dma@21300 {
170 #address-cells = <1>;
171 #size-cells = <1>;
172 compatible = "fsl,p1010-dma", "fsl,eloplus-dma";
173 reg = <0x21300 0x4>;
174 ranges = <0x0 0x21100 0x200>;
175 cell-index = <0>;
176 dma-channel@0 {
177 compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
178 reg = <0x0 0x80>;
179 cell-index = <0>;
180 interrupt-parent = <&mpic>;
181 interrupts = <20 2>;
182 };
183 dma-channel@80 {
184 compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
185 reg = <0x80 0x80>;
186 cell-index = <1>;
187 interrupt-parent = <&mpic>;
188 interrupts = <21 2>;
189 };
190 dma-channel@100 {
191 compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
192 reg = <0x100 0x80>;
193 cell-index = <2>;
194 interrupt-parent = <&mpic>;
195 interrupts = <22 2>;
196 };
197 dma-channel@180 {
198 compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
199 reg = <0x180 0x80>;
200 cell-index = <3>;
201 interrupt-parent = <&mpic>;
202 interrupts = <23 2>;
203 };
204 };
205
206 usb@22000 {
207 compatible = "fsl-usb2-dr";
208 reg = <0x22000 0x1000>;
209 #address-cells = <1>;
210 #size-cells = <0>;
211 interrupt-parent = <&mpic>;
212 interrupts = <28 0x2>;
213 dr_mode = "host";
214 };
215
216 mdio@24000 {
217 #address-cells = <1>;
218 #size-cells = <0>;
219 compatible = "fsl,etsec2-mdio";
220 reg = <0x24000 0x1000 0xb0030 0x4>;
221 };
222
223 mdio@25000 {
224 #address-cells = <1>;
225 #size-cells = <0>;
226 compatible = "fsl,etsec2-tbi";
227 reg = <0x25000 0x1000 0xb1030 0x4>;
228 tbi0: tbi-phy@11 {
229 reg = <0x11>;
230 device_type = "tbi-phy";
231 };
232 };
233
234 mdio@26000 {
235 #address-cells = <1>;
236 #size-cells = <0>;
237 compatible = "fsl,etsec2-tbi";
238 reg = <0x26000 0x1000 0xb1030 0x4>;
239 tbi1: tbi-phy@11 {
240 reg = <0x11>;
241 device_type = "tbi-phy";
242 };
243 };
244
245 sdhci@2e000 {
246 compatible = "fsl,esdhc";
247 reg = <0x2e000 0x1000>;
248 interrupts = <72 0x8>;
249 interrupt-parent = <&mpic>;
250 /* Filled in by U-Boot */
251 clock-frequency = <0>;
252 fsl,sdhci-auto-cmd12;
253 };
254
255 enet0: ethernet@b0000 {
256 #address-cells = <1>;
257 #size-cells = <1>;
258 device_type = "network";
259 model = "eTSEC";
260 compatible = "fsl,etsec2";
261 fsl,num_rx_queues = <0x8>;
262 fsl,num_tx_queues = <0x8>;
263 local-mac-address = [ 00 00 00 00 00 00 ];
264 interrupt-parent = <&mpic>;
265
266 queue-group@0 {
267 #address-cells = <1>;
268 #size-cells = <1>;
269 reg = <0xb0000 0x1000>;
270 fsl,rx-bit-map = <0xff>;
271 fsl,tx-bit-map = <0xff>;
272 interrupts = <29 2 30 2 34 2>;
273 };
274
275 };
276
277 enet1: ethernet@b1000 {
278 #address-cells = <1>;
279 #size-cells = <1>;
280 device_type = "network";
281 model = "eTSEC";
282 compatible = "fsl,etsec2";
283 fsl,num_rx_queues = <0x8>;
284 fsl,num_tx_queues = <0x8>;
285 local-mac-address = [ 00 00 00 00 00 00 ];
286 interrupt-parent = <&mpic>;
287
288 queue-group@0 {
289 #address-cells = <1>;
290 #size-cells = <1>;
291 reg = <0xb1000 0x1000>;
292 fsl,rx-bit-map = <0xff>;
293 fsl,tx-bit-map = <0xff>;
294 interrupts = <35 2 36 2 40 2>;
295 };
296
297 };
298
299 enet2: ethernet@b2000 {
300 #address-cells = <1>;
301 #size-cells = <1>;
302 device_type = "network";
303 model = "eTSEC";
304 compatible = "fsl,etsec2";
305 fsl,num_rx_queues = <0x8>;
306 fsl,num_tx_queues = <0x8>;
307 local-mac-address = [ 00 00 00 00 00 00 ];
308 interrupt-parent = <&mpic>;
309
310 queue-group@0 {
311 #address-cells = <1>;
312 #size-cells = <1>;
313 reg = <0xb2000 0x1000>;
314 fsl,rx-bit-map = <0xff>;
315 fsl,tx-bit-map = <0xff>;
316 interrupts = <31 2 32 2 33 2>;
317 };
318
319 };
320
321 mpic: pic@40000 {
322 interrupt-controller;
323 #address-cells = <0>;
324 #interrupt-cells = <2>;
325 reg = <0x40000 0x40000>;
326 compatible = "chrp,open-pic";
327 device_type = "open-pic";
328 };
329
330 msi@41600 {
331 compatible = "fsl,p1010-msi", "fsl,mpic-msi";
332 reg = <0x41600 0x80>;
333 msi-available-ranges = <0 0x100>;
334 interrupts = <
335 0xe0 0
336 0xe1 0
337 0xe2 0
338 0xe3 0
339 0xe4 0
340 0xe5 0
341 0xe6 0
342 0xe7 0>;
343 interrupt-parent = <&mpic>;
344 };
345
346 global-utilities@e0000 { //global utilities block
347 compatible = "fsl,p1010-guts";
348 reg = <0xe0000 0x1000>;
349 fsl,has-rstcr;
350 };
351 };
352
353 pci0: pcie@ffe09000 {
354 compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
355 device_type = "pci";
356 #size-cells = <2>;
357 #address-cells = <3>;
358 reg = <0 0xffe09000 0 0x1000>;
359 bus-range = <0 255>;
360 clock-frequency = <33333333>;
361 interrupt-parent = <&mpic>;
362 interrupts = <16 2>;
363 };
364
365 pci1: pcie@ffe0a000 {
366 compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
367 device_type = "pci";
368 #size-cells = <2>;
369 #address-cells = <3>;
370 reg = <0 0xffe0a000 0 0x1000>;
371 bus-range = <0 255>;
372 clock-frequency = <33333333>;
373 interrupt-parent = <&mpic>;
374 interrupts = <16 2>;
375 };
376};