Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * linux/arch/arm/kernel/irq.c
4 *
5 * Copyright (C) 1992 Linus Torvalds
6 * Modifications for ARM processor Copyright (C) 1995-2000 Russell King.
7 *
8 * Support for Dynamic Tick Timer Copyright (C) 2004-2005 Nokia Corporation.
9 * Dynamic Tick Timer written by Tony Lindgren <tony@atomide.com> and
10 * Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>.
11 *
12 * This file contains the code used by various IRQ handling routines:
13 * asking for different IRQ's should be done through these routines
14 * instead of just grabbing them. Thus setups with different IRQ numbers
15 * shouldn't result in any weird surprises, and installing new handlers
16 * should be easier.
17 *
18 * IRQ's are in fact implemented a bit like signal handlers for the kernel.
19 * Naturally it's not a 1:1 relation, but there are similarities.
20 */
21#include <linux/signal.h>
22#include <linux/ioport.h>
23#include <linux/interrupt.h>
24#include <linux/irq.h>
25#include <linux/irqchip.h>
26#include <linux/random.h>
27#include <linux/smp.h>
28#include <linux/init.h>
29#include <linux/seq_file.h>
30#include <linux/errno.h>
31#include <linux/list.h>
32#include <linux/kallsyms.h>
33#include <linux/proc_fs.h>
34#include <linux/export.h>
35#include <linux/vmalloc.h>
36
37#include <asm/hardware/cache-l2x0.h>
38#include <asm/hardware/cache-uniphier.h>
39#include <asm/outercache.h>
40#include <asm/softirq_stack.h>
41#include <asm/exception.h>
42#include <asm/mach/arch.h>
43#include <asm/mach/irq.h>
44#include <asm/mach/time.h>
45
46#include "reboot.h"
47
48unsigned long irq_err_count;
49
50#ifdef CONFIG_IRQSTACKS
51
52asmlinkage DEFINE_PER_CPU_READ_MOSTLY(u8 *, irq_stack_ptr);
53
54static void __init init_irq_stacks(void)
55{
56 u8 *stack;
57 int cpu;
58
59 for_each_possible_cpu(cpu) {
60 if (!IS_ENABLED(CONFIG_VMAP_STACK))
61 stack = (u8 *)__get_free_pages(GFP_KERNEL,
62 THREAD_SIZE_ORDER);
63 else
64 stack = __vmalloc_node(THREAD_SIZE, THREAD_ALIGN,
65 THREADINFO_GFP, NUMA_NO_NODE,
66 __builtin_return_address(0));
67
68 if (WARN_ON(!stack))
69 break;
70 per_cpu(irq_stack_ptr, cpu) = &stack[THREAD_SIZE];
71 }
72}
73
74#ifdef CONFIG_SOFTIRQ_ON_OWN_STACK
75static void ____do_softirq(void *arg)
76{
77 __do_softirq();
78}
79
80void do_softirq_own_stack(void)
81{
82 call_with_stack(____do_softirq, NULL,
83 __this_cpu_read(irq_stack_ptr));
84}
85#endif
86#endif
87
88int arch_show_interrupts(struct seq_file *p, int prec)
89{
90#ifdef CONFIG_FIQ
91 show_fiq_list(p, prec);
92#endif
93#ifdef CONFIG_SMP
94 show_ipi_list(p, prec);
95#endif
96 seq_printf(p, "%*s: %10lu\n", prec, "Err", irq_err_count);
97 return 0;
98}
99
100/*
101 * handle_IRQ handles all hardware IRQ's. Decoded IRQs should
102 * not come via this function. Instead, they should provide their
103 * own 'handler'. Used by platform code implementing C-based 1st
104 * level decoding.
105 */
106void handle_IRQ(unsigned int irq, struct pt_regs *regs)
107{
108 struct irq_desc *desc;
109
110 /*
111 * Some hardware gives randomly wrong interrupts. Rather
112 * than crashing, do something sensible.
113 */
114 if (unlikely(!irq || irq >= irq_get_nr_irqs()))
115 desc = NULL;
116 else
117 desc = irq_to_desc(irq);
118
119 if (likely(desc))
120 handle_irq_desc(desc);
121 else
122 ack_bad_irq(irq);
123}
124
125void __init init_IRQ(void)
126{
127 int ret;
128
129#ifdef CONFIG_IRQSTACKS
130 init_irq_stacks();
131#endif
132
133 if (IS_ENABLED(CONFIG_OF) && !machine_desc->init_irq)
134 irqchip_init();
135 else
136 machine_desc->init_irq();
137
138 if (IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_CACHE_L2X0) &&
139 (machine_desc->l2c_aux_mask || machine_desc->l2c_aux_val)) {
140 if (!outer_cache.write_sec)
141 outer_cache.write_sec = machine_desc->l2c_write_sec;
142 ret = l2x0_of_init(machine_desc->l2c_aux_val,
143 machine_desc->l2c_aux_mask);
144 if (ret && ret != -ENODEV)
145 pr_err("L2C: failed to init: %d\n", ret);
146 }
147
148 uniphier_cache_init();
149}
150
151#ifdef CONFIG_SPARSE_IRQ
152int __init arch_probe_nr_irqs(void)
153{
154 return irq_set_nr_irqs(machine_desc->nr_irqs ? : NR_IRQS);
155}
156#endif
1/*
2 * linux/arch/arm/kernel/irq.c
3 *
4 * Copyright (C) 1992 Linus Torvalds
5 * Modifications for ARM processor Copyright (C) 1995-2000 Russell King.
6 *
7 * Support for Dynamic Tick Timer Copyright (C) 2004-2005 Nokia Corporation.
8 * Dynamic Tick Timer written by Tony Lindgren <tony@atomide.com> and
9 * Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>.
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
14 *
15 * This file contains the code used by various IRQ handling routines:
16 * asking for different IRQ's should be done through these routines
17 * instead of just grabbing them. Thus setups with different IRQ numbers
18 * shouldn't result in any weird surprises, and installing new handlers
19 * should be easier.
20 *
21 * IRQ's are in fact implemented a bit like signal handlers for the kernel.
22 * Naturally it's not a 1:1 relation, but there are similarities.
23 */
24#include <linux/kernel_stat.h>
25#include <linux/module.h>
26#include <linux/signal.h>
27#include <linux/ioport.h>
28#include <linux/interrupt.h>
29#include <linux/irq.h>
30#include <linux/random.h>
31#include <linux/smp.h>
32#include <linux/init.h>
33#include <linux/seq_file.h>
34#include <linux/errno.h>
35#include <linux/list.h>
36#include <linux/kallsyms.h>
37#include <linux/proc_fs.h>
38#include <linux/ftrace.h>
39
40#include <asm/system.h>
41#include <asm/mach/arch.h>
42#include <asm/mach/irq.h>
43#include <asm/mach/time.h>
44
45/*
46 * No architecture-specific irq_finish function defined in arm/arch/irqs.h.
47 */
48#ifndef irq_finish
49#define irq_finish(irq) do { } while (0)
50#endif
51
52unsigned long irq_err_count;
53
54int arch_show_interrupts(struct seq_file *p, int prec)
55{
56#ifdef CONFIG_FIQ
57 show_fiq_list(p, prec);
58#endif
59#ifdef CONFIG_SMP
60 show_ipi_list(p, prec);
61#endif
62#ifdef CONFIG_LOCAL_TIMERS
63 show_local_irqs(p, prec);
64#endif
65 seq_printf(p, "%*s: %10lu\n", prec, "Err", irq_err_count);
66 return 0;
67}
68
69/*
70 * handle_IRQ handles all hardware IRQ's. Decoded IRQs should
71 * not come via this function. Instead, they should provide their
72 * own 'handler'. Used by platform code implementing C-based 1st
73 * level decoding.
74 */
75void handle_IRQ(unsigned int irq, struct pt_regs *regs)
76{
77 struct pt_regs *old_regs = set_irq_regs(regs);
78
79 irq_enter();
80
81 /*
82 * Some hardware gives randomly wrong interrupts. Rather
83 * than crashing, do something sensible.
84 */
85 if (unlikely(irq >= nr_irqs)) {
86 if (printk_ratelimit())
87 printk(KERN_WARNING "Bad IRQ%u\n", irq);
88 ack_bad_irq(irq);
89 } else {
90 generic_handle_irq(irq);
91 }
92
93 /* AT91 specific workaround */
94 irq_finish(irq);
95
96 irq_exit();
97 set_irq_regs(old_regs);
98}
99
100/*
101 * asm_do_IRQ is the interface to be used from assembly code.
102 */
103asmlinkage void __exception_irq_entry
104asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
105{
106 handle_IRQ(irq, regs);
107}
108
109void set_irq_flags(unsigned int irq, unsigned int iflags)
110{
111 unsigned long clr = 0, set = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
112
113 if (irq >= nr_irqs) {
114 printk(KERN_ERR "Trying to set irq flags for IRQ%d\n", irq);
115 return;
116 }
117
118 if (iflags & IRQF_VALID)
119 clr |= IRQ_NOREQUEST;
120 if (iflags & IRQF_PROBE)
121 clr |= IRQ_NOPROBE;
122 if (!(iflags & IRQF_NOAUTOEN))
123 clr |= IRQ_NOAUTOEN;
124 /* Order is clear bits in "clr" then set bits in "set" */
125 irq_modify_status(irq, clr, set & ~clr);
126}
127
128void __init init_IRQ(void)
129{
130 machine_desc->init_irq();
131}
132
133#ifdef CONFIG_SPARSE_IRQ
134int __init arch_probe_nr_irqs(void)
135{
136 nr_irqs = machine_desc->nr_irqs ? machine_desc->nr_irqs : NR_IRQS;
137 return nr_irqs;
138}
139#endif
140
141#ifdef CONFIG_HOTPLUG_CPU
142
143static bool migrate_one_irq(struct irq_desc *desc)
144{
145 struct irq_data *d = irq_desc_get_irq_data(desc);
146 const struct cpumask *affinity = d->affinity;
147 struct irq_chip *c;
148 bool ret = false;
149
150 /*
151 * If this is a per-CPU interrupt, or the affinity does not
152 * include this CPU, then we have nothing to do.
153 */
154 if (irqd_is_per_cpu(d) || !cpumask_test_cpu(smp_processor_id(), affinity))
155 return false;
156
157 if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) {
158 affinity = cpu_online_mask;
159 ret = true;
160 }
161
162 c = irq_data_get_irq_chip(d);
163 if (c->irq_set_affinity)
164 c->irq_set_affinity(d, affinity, true);
165 else
166 pr_debug("IRQ%u: unable to set affinity\n", d->irq);
167
168 return ret;
169}
170
171/*
172 * The current CPU has been marked offline. Migrate IRQs off this CPU.
173 * If the affinity settings do not allow other CPUs, force them onto any
174 * available CPU.
175 *
176 * Note: we must iterate over all IRQs, whether they have an attached
177 * action structure or not, as we need to get chained interrupts too.
178 */
179void migrate_irqs(void)
180{
181 unsigned int i;
182 struct irq_desc *desc;
183 unsigned long flags;
184
185 local_irq_save(flags);
186
187 for_each_irq_desc(i, desc) {
188 bool affinity_broken = false;
189
190 if (!desc)
191 continue;
192
193 raw_spin_lock(&desc->lock);
194 affinity_broken = migrate_one_irq(desc);
195 raw_spin_unlock(&desc->lock);
196
197 if (affinity_broken && printk_ratelimit())
198 pr_warning("IRQ%u no longer affine to CPU%u\n", i,
199 smp_processor_id());
200 }
201
202 local_irq_restore(flags);
203}
204#endif /* CONFIG_HOTPLUG_CPU */