Loading...
1# SPDX-License-Identifier: GPL-2.0
2VERSION = 6
3PATCHLEVEL = 13
4SUBLEVEL = 7
5EXTRAVERSION =
6NAME = Baby Opossum Posse
7
8# *DOCUMENTATION*
9# To see a list of typical targets execute "make help"
10# More info can be located in ./README
11# Comments in this file are targeted only to the developer, do not
12# expect to learn how to build the kernel reading this file.
13
14ifeq ($(filter output-sync,$(.FEATURES)),)
15$(error GNU Make >= 4.0 is required. Your Make version is $(MAKE_VERSION))
16endif
17
18$(if $(filter __%, $(MAKECMDGOALS)), \
19 $(error targets prefixed with '__' are only for internal use))
20
21# That's our default target when none is given on the command line
22PHONY := __all
23__all:
24
25# We are using a recursive build, so we need to do a little thinking
26# to get the ordering right.
27#
28# Most importantly: sub-Makefiles should only ever modify files in
29# their own directory. If in some directory we have a dependency on
30# a file in another dir (which doesn't happen often, but it's often
31# unavoidable when linking the built-in.a targets which finally
32# turn into vmlinux), we will call a sub make in that other dir, and
33# after that we are sure that everything which is in that other dir
34# is now up to date.
35#
36# The only cases where we need to modify files which have global
37# effects are thus separated out and done before the recursive
38# descending is started. They are now explicitly listed as the
39# prepare rule.
40
41this-makefile := $(lastword $(MAKEFILE_LIST))
42abs_srctree := $(realpath $(dir $(this-makefile)))
43abs_output := $(CURDIR)
44
45ifneq ($(sub_make_done),1)
46
47# Do not use make's built-in rules and variables
48# (this increases performance and avoids hard-to-debug behaviour)
49MAKEFLAGS += -rR
50
51# Avoid funny character set dependencies
52unexport LC_ALL
53LC_COLLATE=C
54LC_NUMERIC=C
55export LC_COLLATE LC_NUMERIC
56
57# Avoid interference with shell env settings
58unexport GREP_OPTIONS
59
60# Beautify output
61# ---------------------------------------------------------------------------
62#
63# Most of build commands in Kbuild start with "cmd_". You can optionally define
64# "quiet_cmd_*". If defined, the short log is printed. Otherwise, no log from
65# that command is printed by default.
66#
67# e.g.)
68# quiet_cmd_depmod = DEPMOD $(MODLIB)
69# cmd_depmod = $(srctree)/scripts/depmod.sh $(DEPMOD) $(KERNELRELEASE)
70#
71# A simple variant is to prefix commands with $(Q) - that's useful
72# for commands that shall be hidden in non-verbose mode.
73#
74# $(Q)$(MAKE) $(build)=scripts/basic
75#
76# If KBUILD_VERBOSE contains 1, the whole command is echoed.
77# If KBUILD_VERBOSE contains 2, the reason for rebuilding is printed.
78#
79# To put more focus on warnings, be less verbose as default
80# Use 'make V=1' to see the full commands
81
82ifeq ("$(origin V)", "command line")
83 KBUILD_VERBOSE = $(V)
84endif
85
86quiet = quiet_
87Q = @
88
89ifneq ($(findstring 1, $(KBUILD_VERBOSE)),)
90 quiet =
91 Q =
92endif
93
94# If the user is running make -s (silent mode), suppress echoing of
95# commands
96ifneq ($(findstring s,$(firstword -$(MAKEFLAGS))),)
97quiet=silent_
98override KBUILD_VERBOSE :=
99endif
100
101export quiet Q KBUILD_VERBOSE
102
103# Call a source code checker (by default, "sparse") as part of the
104# C compilation.
105#
106# Use 'make C=1' to enable checking of only re-compiled files.
107# Use 'make C=2' to enable checking of *all* source files, regardless
108# of whether they are re-compiled or not.
109#
110# See the file "Documentation/dev-tools/sparse.rst" for more details,
111# including where to get the "sparse" utility.
112
113ifeq ("$(origin C)", "command line")
114 KBUILD_CHECKSRC = $(C)
115endif
116ifndef KBUILD_CHECKSRC
117 KBUILD_CHECKSRC = 0
118endif
119
120export KBUILD_CHECKSRC
121
122# Enable "clippy" (a linter) as part of the Rust compilation.
123#
124# Use 'make CLIPPY=1' to enable it.
125ifeq ("$(origin CLIPPY)", "command line")
126 KBUILD_CLIPPY := $(CLIPPY)
127endif
128
129export KBUILD_CLIPPY
130
131# Use make M=dir or set the environment variable KBUILD_EXTMOD to specify the
132# directory of external module to build. Setting M= takes precedence.
133ifeq ("$(origin M)", "command line")
134 KBUILD_EXTMOD := $(M)
135endif
136
137ifeq ("$(origin MO)", "command line")
138 KBUILD_EXTMOD_OUTPUT := $(MO)
139endif
140
141$(if $(word 2, $(KBUILD_EXTMOD)), \
142 $(error building multiple external modules is not supported))
143
144$(foreach x, % :, $(if $(findstring $x, $(KBUILD_EXTMOD)), \
145 $(error module directory path cannot contain '$x')))
146
147# Remove trailing slashes
148ifneq ($(filter %/, $(KBUILD_EXTMOD)),)
149KBUILD_EXTMOD := $(shell dirname $(KBUILD_EXTMOD).)
150endif
151
152export KBUILD_EXTMOD
153
154# backward compatibility
155KBUILD_EXTRA_WARN ?= $(KBUILD_ENABLE_EXTRA_GCC_CHECKS)
156
157ifeq ("$(origin W)", "command line")
158 KBUILD_EXTRA_WARN := $(W)
159endif
160
161export KBUILD_EXTRA_WARN
162
163# Kbuild will save output files in the current working directory.
164# This does not need to match to the root of the kernel source tree.
165#
166# For example, you can do this:
167#
168# cd /dir/to/store/output/files; make -f /dir/to/kernel/source/Makefile
169#
170# If you want to save output files in a different location, there are
171# two syntaxes to specify it.
172#
173# 1) O=
174# Use "make O=dir/to/store/output/files/"
175#
176# 2) Set KBUILD_OUTPUT
177# Set the environment variable KBUILD_OUTPUT to point to the output directory.
178# export KBUILD_OUTPUT=dir/to/store/output/files/; make
179#
180# The O= assignment takes precedence over the KBUILD_OUTPUT environment
181# variable.
182
183ifeq ("$(origin O)", "command line")
184 KBUILD_OUTPUT := $(O)
185endif
186
187ifdef KBUILD_EXTMOD
188 ifdef KBUILD_OUTPUT
189 objtree := $(realpath $(KBUILD_OUTPUT))
190 $(if $(objtree),,$(error specified kernel directory "$(KBUILD_OUTPUT)" does not exist))
191 else
192 objtree := $(abs_srctree)
193 endif
194 # If Make is invoked from the kernel directory (either kernel
195 # source directory or kernel build directory), external modules
196 # are built in $(KBUILD_EXTMOD) for backward compatibility,
197 # otherwise, built in the current directory.
198 output := $(or $(KBUILD_EXTMOD_OUTPUT),$(if $(filter $(CURDIR),$(objtree) $(abs_srctree)),$(KBUILD_EXTMOD)))
199 # KBUILD_EXTMOD might be a relative path. Remember its absolute path before
200 # Make changes the working directory.
201 srcroot := $(realpath $(KBUILD_EXTMOD))
202 $(if $(srcroot),,$(error specified external module directory "$(KBUILD_EXTMOD)" does not exist))
203else
204 objtree := .
205 output := $(KBUILD_OUTPUT)
206endif
207
208export objtree srcroot
209
210# Do we want to change the working directory?
211ifneq ($(output),)
212# $(realpath ...) gets empty if the path does not exist. Run 'mkdir -p' first.
213$(shell mkdir -p "$(output)")
214# $(realpath ...) resolves symlinks
215abs_output := $(realpath $(output))
216$(if $(abs_output),,$(error failed to create output directory "$(output)"))
217endif
218
219ifneq ($(words $(subst :, ,$(abs_srctree))), 1)
220$(error source directory cannot contain spaces or colons)
221endif
222
223export sub_make_done := 1
224
225endif # sub_make_done
226
227ifeq ($(abs_output),$(CURDIR))
228# Suppress "Entering directory ..." if we are at the final work directory.
229no-print-directory := --no-print-directory
230else
231# Recursion to show "Entering directory ..."
232need-sub-make := 1
233endif
234
235ifeq ($(filter --no-print-directory, $(MAKEFLAGS)),)
236# If --no-print-directory is unset, recurse once again to set it.
237# You may end up recursing into __sub-make twice. This is needed due to the
238# behavior change in GNU Make 4.4.1.
239need-sub-make := 1
240endif
241
242ifeq ($(need-sub-make),1)
243
244PHONY += $(MAKECMDGOALS) __sub-make
245
246$(filter-out $(this-makefile), $(MAKECMDGOALS)) __all: __sub-make
247 @:
248
249# Invoke a second make in the output directory, passing relevant variables
250__sub-make:
251 $(Q)$(MAKE) $(no-print-directory) -C $(abs_output) \
252 -f $(abs_srctree)/Makefile $(MAKECMDGOALS)
253
254else # need-sub-make
255
256# We process the rest of the Makefile if this is the final invocation of make
257
258ifndef KBUILD_EXTMOD
259srcroot := $(abs_srctree)
260endif
261
262ifeq ($(srcroot),$(CURDIR))
263building_out_of_srctree :=
264else
265export building_out_of_srctree := 1
266endif
267
268ifdef KBUILD_ABS_SRCTREE
269 # Do nothing. Use the absolute path.
270else ifeq ($(srcroot),$(CURDIR))
271 # Building in the source.
272 srcroot := .
273else ifeq ($(srcroot)/,$(dir $(CURDIR)))
274 # Building in a subdirectory of the source.
275 srcroot := ..
276endif
277
278export srctree := $(if $(KBUILD_EXTMOD),$(abs_srctree),$(srcroot))
279
280ifdef building_out_of_srctree
281export VPATH := $(srcroot)
282else
283VPATH :=
284endif
285
286# To make sure we do not include .config for any of the *config targets
287# catch them early, and hand them over to scripts/kconfig/Makefile
288# It is allowed to specify more targets when calling make, including
289# mixing *config targets and build targets.
290# For example 'make oldconfig all'.
291# Detect when mixed targets is specified, and make a second invocation
292# of make so .config is not included in this case either (for *config).
293
294version_h := include/generated/uapi/linux/version.h
295
296clean-targets := %clean mrproper cleandocs
297no-dot-config-targets := $(clean-targets) \
298 cscope gtags TAGS tags help% %docs check% coccicheck \
299 $(version_h) headers headers_% archheaders archscripts \
300 %asm-generic kernelversion %src-pkg dt_binding_check \
301 outputmakefile rustavailable rustfmt rustfmtcheck
302no-sync-config-targets := $(no-dot-config-targets) %install modules_sign kernelrelease \
303 image_name
304single-targets := %.a %.i %.ko %.lds %.ll %.lst %.mod %.o %.rsi %.s %/
305
306config-build :=
307mixed-build :=
308need-config := 1
309may-sync-config := 1
310single-build :=
311
312ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
313 ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
314 need-config :=
315 endif
316endif
317
318ifneq ($(filter $(no-sync-config-targets), $(MAKECMDGOALS)),)
319 ifeq ($(filter-out $(no-sync-config-targets), $(MAKECMDGOALS)),)
320 may-sync-config :=
321 endif
322endif
323
324need-compiler := $(may-sync-config)
325
326ifneq ($(KBUILD_EXTMOD),)
327 may-sync-config :=
328endif
329
330ifeq ($(KBUILD_EXTMOD),)
331 ifneq ($(filter %config,$(MAKECMDGOALS)),)
332 config-build := 1
333 ifneq ($(words $(MAKECMDGOALS)),1)
334 mixed-build := 1
335 endif
336 endif
337endif
338
339# We cannot build single targets and the others at the same time
340ifneq ($(filter $(single-targets), $(MAKECMDGOALS)),)
341 single-build := 1
342 ifneq ($(filter-out $(single-targets), $(MAKECMDGOALS)),)
343 mixed-build := 1
344 endif
345endif
346
347# For "make -j clean all", "make -j mrproper defconfig all", etc.
348ifneq ($(filter $(clean-targets),$(MAKECMDGOALS)),)
349 ifneq ($(filter-out $(clean-targets),$(MAKECMDGOALS)),)
350 mixed-build := 1
351 endif
352endif
353
354# install and modules_install need also be processed one by one
355ifneq ($(filter install,$(MAKECMDGOALS)),)
356 ifneq ($(filter modules_install,$(MAKECMDGOALS)),)
357 mixed-build := 1
358 endif
359endif
360
361ifdef mixed-build
362# ===========================================================================
363# We're called with mixed targets (*config and build targets).
364# Handle them one by one.
365
366PHONY += $(MAKECMDGOALS) __build_one_by_one
367
368$(MAKECMDGOALS): __build_one_by_one
369 @:
370
371__build_one_by_one:
372 $(Q)set -e; \
373 for i in $(MAKECMDGOALS); do \
374 $(MAKE) -f $(srctree)/Makefile $$i; \
375 done
376
377else # !mixed-build
378
379include $(srctree)/scripts/Kbuild.include
380
381# Read KERNELRELEASE from include/config/kernel.release (if it exists)
382KERNELRELEASE = $(call read-file, $(objtree)/include/config/kernel.release)
383KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
384export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
385
386include $(srctree)/scripts/subarch.include
387
388# Cross compiling and selecting different set of gcc/bin-utils
389# ---------------------------------------------------------------------------
390#
391# When performing cross compilation for other architectures ARCH shall be set
392# to the target architecture. (See arch/* for the possibilities).
393# ARCH can be set during invocation of make:
394# make ARCH=arm64
395# Another way is to have ARCH set in the environment.
396# The default ARCH is the host where make is executed.
397
398# CROSS_COMPILE specify the prefix used for all executables used
399# during compilation. Only gcc and related bin-utils executables
400# are prefixed with $(CROSS_COMPILE).
401# CROSS_COMPILE can be set on the command line
402# make CROSS_COMPILE=aarch64-linux-gnu-
403# Alternatively CROSS_COMPILE can be set in the environment.
404# Default value for CROSS_COMPILE is not to prefix executables
405# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
406ARCH ?= $(SUBARCH)
407
408# Architecture as present in compile.h
409UTS_MACHINE := $(ARCH)
410SRCARCH := $(ARCH)
411
412# Additional ARCH settings for x86
413ifeq ($(ARCH),i386)
414 SRCARCH := x86
415endif
416ifeq ($(ARCH),x86_64)
417 SRCARCH := x86
418endif
419
420# Additional ARCH settings for sparc
421ifeq ($(ARCH),sparc32)
422 SRCARCH := sparc
423endif
424ifeq ($(ARCH),sparc64)
425 SRCARCH := sparc
426endif
427
428# Additional ARCH settings for parisc
429ifeq ($(ARCH),parisc64)
430 SRCARCH := parisc
431endif
432
433export cross_compiling :=
434ifneq ($(SRCARCH),$(SUBARCH))
435cross_compiling := 1
436endif
437
438KCONFIG_CONFIG ?= .config
439export KCONFIG_CONFIG
440
441# SHELL used by kbuild
442CONFIG_SHELL := sh
443
444HOST_LFS_CFLAGS := $(shell getconf LFS_CFLAGS 2>/dev/null)
445HOST_LFS_LDFLAGS := $(shell getconf LFS_LDFLAGS 2>/dev/null)
446HOST_LFS_LIBS := $(shell getconf LFS_LIBS 2>/dev/null)
447
448ifneq ($(LLVM),)
449ifneq ($(filter %/,$(LLVM)),)
450LLVM_PREFIX := $(LLVM)
451else ifneq ($(filter -%,$(LLVM)),)
452LLVM_SUFFIX := $(LLVM)
453endif
454
455HOSTCC = $(LLVM_PREFIX)clang$(LLVM_SUFFIX)
456HOSTCXX = $(LLVM_PREFIX)clang++$(LLVM_SUFFIX)
457else
458HOSTCC = gcc
459HOSTCXX = g++
460endif
461HOSTRUSTC = rustc
462HOSTPKG_CONFIG = pkg-config
463
464KBUILD_USERHOSTCFLAGS := -Wall -Wmissing-prototypes -Wstrict-prototypes \
465 -O2 -fomit-frame-pointer -std=gnu11
466KBUILD_USERCFLAGS := $(KBUILD_USERHOSTCFLAGS) $(USERCFLAGS)
467KBUILD_USERLDFLAGS := $(USERLDFLAGS)
468
469# These flags apply to all Rust code in the tree, including the kernel and
470# host programs.
471export rust_common_flags := --edition=2021 \
472 -Zbinary_dep_depinfo=y \
473 -Astable_features \
474 -Dnon_ascii_idents \
475 -Dunsafe_op_in_unsafe_fn \
476 -Wmissing_docs \
477 -Wrust_2018_idioms \
478 -Wunreachable_pub \
479 -Wclippy::all \
480 -Wclippy::ignored_unit_patterns \
481 -Wclippy::mut_mut \
482 -Wclippy::needless_bitwise_bool \
483 -Wclippy::needless_continue \
484 -Aclippy::needless_lifetimes \
485 -Wclippy::no_mangle_with_rust_abi \
486 -Wclippy::undocumented_unsafe_blocks \
487 -Wclippy::unnecessary_safety_comment \
488 -Wclippy::unnecessary_safety_doc \
489 -Wrustdoc::missing_crate_level_docs \
490 -Wrustdoc::unescaped_backticks
491
492KBUILD_HOSTCFLAGS := $(KBUILD_USERHOSTCFLAGS) $(HOST_LFS_CFLAGS) \
493 $(HOSTCFLAGS) -I $(srctree)/scripts/include
494KBUILD_HOSTCXXFLAGS := -Wall -O2 $(HOST_LFS_CFLAGS) $(HOSTCXXFLAGS) \
495 -I $(srctree)/scripts/include
496KBUILD_HOSTRUSTFLAGS := $(rust_common_flags) -O -Cstrip=debuginfo \
497 -Zallow-features= $(HOSTRUSTFLAGS)
498KBUILD_HOSTLDFLAGS := $(HOST_LFS_LDFLAGS) $(HOSTLDFLAGS)
499KBUILD_HOSTLDLIBS := $(HOST_LFS_LIBS) $(HOSTLDLIBS)
500
501# Make variables (CC, etc...)
502CPP = $(CC) -E
503ifneq ($(LLVM),)
504CC = $(LLVM_PREFIX)clang$(LLVM_SUFFIX)
505LD = $(LLVM_PREFIX)ld.lld$(LLVM_SUFFIX)
506AR = $(LLVM_PREFIX)llvm-ar$(LLVM_SUFFIX)
507NM = $(LLVM_PREFIX)llvm-nm$(LLVM_SUFFIX)
508OBJCOPY = $(LLVM_PREFIX)llvm-objcopy$(LLVM_SUFFIX)
509OBJDUMP = $(LLVM_PREFIX)llvm-objdump$(LLVM_SUFFIX)
510READELF = $(LLVM_PREFIX)llvm-readelf$(LLVM_SUFFIX)
511STRIP = $(LLVM_PREFIX)llvm-strip$(LLVM_SUFFIX)
512else
513CC = $(CROSS_COMPILE)gcc
514LD = $(CROSS_COMPILE)ld
515AR = $(CROSS_COMPILE)ar
516NM = $(CROSS_COMPILE)nm
517OBJCOPY = $(CROSS_COMPILE)objcopy
518OBJDUMP = $(CROSS_COMPILE)objdump
519READELF = $(CROSS_COMPILE)readelf
520STRIP = $(CROSS_COMPILE)strip
521endif
522RUSTC = rustc
523RUSTDOC = rustdoc
524RUSTFMT = rustfmt
525CLIPPY_DRIVER = clippy-driver
526BINDGEN = bindgen
527PAHOLE = pahole
528RESOLVE_BTFIDS = $(objtree)/tools/bpf/resolve_btfids/resolve_btfids
529LEX = flex
530YACC = bison
531AWK = awk
532INSTALLKERNEL := installkernel
533PERL = perl
534PYTHON3 = python3
535CHECK = sparse
536BASH = bash
537KGZIP = gzip
538KBZIP2 = bzip2
539KLZOP = lzop
540LZMA = lzma
541LZ4 = lz4
542XZ = xz
543ZSTD = zstd
544
545CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
546 -Wbitwise -Wno-return-void -Wno-unknown-attribute $(CF)
547NOSTDINC_FLAGS :=
548CFLAGS_MODULE =
549RUSTFLAGS_MODULE =
550AFLAGS_MODULE =
551LDFLAGS_MODULE =
552CFLAGS_KERNEL =
553RUSTFLAGS_KERNEL =
554AFLAGS_KERNEL =
555LDFLAGS_vmlinux =
556
557# Use USERINCLUDE when you must reference the UAPI directories only.
558USERINCLUDE := \
559 -I$(srctree)/arch/$(SRCARCH)/include/uapi \
560 -I$(objtree)/arch/$(SRCARCH)/include/generated/uapi \
561 -I$(srctree)/include/uapi \
562 -I$(objtree)/include/generated/uapi \
563 -include $(srctree)/include/linux/compiler-version.h \
564 -include $(srctree)/include/linux/kconfig.h
565
566# Use LINUXINCLUDE when you must reference the include directory.
567# Needed to be compatible with the O= option
568LINUXINCLUDE := \
569 -I$(srctree)/arch/$(SRCARCH)/include \
570 -I$(objtree)/arch/$(SRCARCH)/include/generated \
571 -I$(srctree)/include \
572 -I$(objtree)/include \
573 $(USERINCLUDE)
574
575KBUILD_AFLAGS := -D__ASSEMBLY__ -fno-PIE
576
577KBUILD_CFLAGS :=
578KBUILD_CFLAGS += -std=gnu11
579KBUILD_CFLAGS += -fshort-wchar
580KBUILD_CFLAGS += -funsigned-char
581KBUILD_CFLAGS += -fno-common
582KBUILD_CFLAGS += -fno-PIE
583KBUILD_CFLAGS += -fno-strict-aliasing
584
585KBUILD_CPPFLAGS := -D__KERNEL__
586KBUILD_RUSTFLAGS := $(rust_common_flags) \
587 -Cpanic=abort -Cembed-bitcode=n -Clto=n \
588 -Cforce-unwind-tables=n -Ccodegen-units=1 \
589 -Csymbol-mangling-version=v0 \
590 -Crelocation-model=static \
591 -Zfunction-sections=n \
592 -Wclippy::float_arithmetic
593
594KBUILD_AFLAGS_KERNEL :=
595KBUILD_CFLAGS_KERNEL :=
596KBUILD_RUSTFLAGS_KERNEL :=
597KBUILD_AFLAGS_MODULE := -DMODULE
598KBUILD_CFLAGS_MODULE := -DMODULE
599KBUILD_RUSTFLAGS_MODULE := --cfg MODULE
600KBUILD_LDFLAGS_MODULE :=
601KBUILD_LDFLAGS :=
602CLANG_FLAGS :=
603
604ifeq ($(KBUILD_CLIPPY),1)
605 RUSTC_OR_CLIPPY_QUIET := CLIPPY
606 RUSTC_OR_CLIPPY = $(CLIPPY_DRIVER)
607else
608 RUSTC_OR_CLIPPY_QUIET := RUSTC
609 RUSTC_OR_CLIPPY = $(RUSTC)
610endif
611
612# Allows the usage of unstable features in stable compilers.
613export RUSTC_BOOTSTRAP := 1
614
615# Allows finding `.clippy.toml` in out-of-srctree builds.
616export CLIPPY_CONF_DIR := $(srctree)
617
618export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC HOSTPKG_CONFIG
619export RUSTC RUSTDOC RUSTFMT RUSTC_OR_CLIPPY_QUIET RUSTC_OR_CLIPPY BINDGEN
620export HOSTRUSTC KBUILD_HOSTRUSTFLAGS
621export CPP AR NM STRIP OBJCOPY OBJDUMP READELF PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL
622export PERL PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX
623export KGZIP KBZIP2 KLZOP LZMA LZ4 XZ ZSTD
624export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE
625export KBUILD_USERCFLAGS KBUILD_USERLDFLAGS
626
627export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS KBUILD_LDFLAGS
628export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
629export KBUILD_RUSTFLAGS RUSTFLAGS_KERNEL RUSTFLAGS_MODULE
630export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
631export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_RUSTFLAGS_MODULE KBUILD_LDFLAGS_MODULE
632export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL KBUILD_RUSTFLAGS_KERNEL
633
634# Files to ignore in find ... statements
635
636export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \
637 -name CVS -o -name .pc -o -name .hg -o -name .git \) \
638 -prune -o
639
640# ===========================================================================
641# Rules shared between *config targets and build targets
642
643# Basic helpers built in scripts/basic
644PHONY += scripts_basic
645scripts_basic:
646 $(Q)$(MAKE) $(build)=scripts/basic
647
648PHONY += outputmakefile
649ifdef building_out_of_srctree
650# Before starting out-of-tree build, make sure the source tree is clean.
651# outputmakefile generates a Makefile in the output directory, if using a
652# separate output directory. This allows convenient use of make in the
653# output directory.
654# At the same time when output Makefile generated, generate .gitignore to
655# ignore whole output directory
656
657ifdef KBUILD_EXTMOD
658print_env_for_makefile = \
659 echo "export KBUILD_OUTPUT = $(objtree)"; \
660 echo "export KBUILD_EXTMOD = $(realpath $(srcroot))" ; \
661 echo "export KBUILD_EXTMOD_OUTPUT = $(CURDIR)"
662else
663print_env_for_makefile = \
664 echo "export KBUILD_OUTPUT = $(CURDIR)"
665endif
666
667quiet_cmd_makefile = GEN Makefile
668 cmd_makefile = { \
669 echo "\# Automatically generated by $(abs_srctree)/Makefile: don't edit"; \
670 $(print_env_for_makefile); \
671 echo "include $(abs_srctree)/Makefile"; \
672 } > Makefile
673
674outputmakefile:
675ifeq ($(KBUILD_EXTMOD),)
676 @if [ -f $(srctree)/.config -o \
677 -d $(srctree)/include/config -o \
678 -d $(srctree)/arch/$(SRCARCH)/include/generated ]; then \
679 echo >&2 "***"; \
680 echo >&2 "*** The source tree is not clean, please run 'make$(if $(findstring command line, $(origin ARCH)), ARCH=$(ARCH)) mrproper'"; \
681 echo >&2 "*** in $(abs_srctree)";\
682 echo >&2 "***"; \
683 false; \
684 fi
685else
686 @if [ -f $(srcroot)/modules.order ]; then \
687 echo >&2 "***"; \
688 echo >&2 "*** The external module source tree is not clean."; \
689 echo >&2 "*** Please run 'make -C $(abs_srctree) M=$(realpath $(srcroot)) clean'"; \
690 echo >&2 "***"; \
691 false; \
692 fi
693endif
694 $(Q)ln -fsn $(srcroot) source
695 $(call cmd,makefile)
696 $(Q)test -e .gitignore || \
697 { echo "# this is build directory, ignore it"; echo "*"; } > .gitignore
698endif
699
700# The expansion should be delayed until arch/$(SRCARCH)/Makefile is included.
701# Some architectures define CROSS_COMPILE in arch/$(SRCARCH)/Makefile.
702# CC_VERSION_TEXT and RUSTC_VERSION_TEXT are referenced from Kconfig (so they
703# need export), and from include/config/auto.conf.cmd to detect the compiler
704# upgrade.
705CC_VERSION_TEXT = $(subst $(pound),,$(shell LC_ALL=C $(CC) --version 2>/dev/null | head -n 1))
706RUSTC_VERSION_TEXT = $(subst $(pound),,$(shell $(RUSTC) --version 2>/dev/null))
707
708ifneq ($(findstring clang,$(CC_VERSION_TEXT)),)
709include $(srctree)/scripts/Makefile.clang
710endif
711
712# Include this also for config targets because some architectures need
713# cc-cross-prefix to determine CROSS_COMPILE.
714ifdef need-compiler
715include $(srctree)/scripts/Makefile.compiler
716endif
717
718ifdef config-build
719# ===========================================================================
720# *config targets only - make sure prerequisites are updated, and descend
721# in scripts/kconfig to make the *config target
722
723# Read arch-specific Makefile to set KBUILD_DEFCONFIG as needed.
724# KBUILD_DEFCONFIG may point out an alternative default configuration
725# used for 'make defconfig'
726include $(srctree)/arch/$(SRCARCH)/Makefile
727export KBUILD_DEFCONFIG KBUILD_KCONFIG CC_VERSION_TEXT RUSTC_VERSION_TEXT
728
729config: outputmakefile scripts_basic FORCE
730 $(Q)$(MAKE) $(build)=scripts/kconfig $@
731
732%config: outputmakefile scripts_basic FORCE
733 $(Q)$(MAKE) $(build)=scripts/kconfig $@
734
735else #!config-build
736# ===========================================================================
737# Build targets only - this includes vmlinux, arch-specific targets, clean
738# targets and others. In general all targets except *config targets.
739
740# If building an external module we do not care about the all: rule
741# but instead __all depend on modules
742PHONY += all
743ifeq ($(KBUILD_EXTMOD),)
744__all: all
745else
746__all: modules
747endif
748
749targets :=
750
751# Decide whether to build built-in, modular, or both.
752# Normally, just do built-in.
753
754KBUILD_MODULES :=
755KBUILD_BUILTIN := 1
756
757# If we have only "make modules", don't compile built-in objects.
758ifeq ($(MAKECMDGOALS),modules)
759 KBUILD_BUILTIN :=
760endif
761
762# If we have "make <whatever> modules", compile modules
763# in addition to whatever we do anyway.
764# Just "make" or "make all" shall build modules as well
765
766ifneq ($(filter all modules nsdeps compile_commands.json clang-%,$(MAKECMDGOALS)),)
767 KBUILD_MODULES := 1
768endif
769
770ifeq ($(MAKECMDGOALS),)
771 KBUILD_MODULES := 1
772endif
773
774export KBUILD_MODULES KBUILD_BUILTIN
775
776ifdef need-config
777include $(objtree)/include/config/auto.conf
778endif
779
780ifeq ($(KBUILD_EXTMOD),)
781# Objects we will link into vmlinux / subdirs we need to visit
782core-y :=
783drivers-y :=
784libs-y := lib
785endif # KBUILD_EXTMOD
786
787# The all: target is the default when no target is given on the
788# command line.
789# This allow a user to issue only 'make' to build a kernel including modules
790# Defaults to vmlinux, but the arch makefile usually adds further targets
791all: vmlinux
792
793CFLAGS_GCOV := -fprofile-arcs -ftest-coverage
794ifdef CONFIG_CC_IS_GCC
795CFLAGS_GCOV += -fno-tree-loop-im
796endif
797export CFLAGS_GCOV
798
799# The arch Makefiles can override CC_FLAGS_FTRACE. We may also append it later.
800ifdef CONFIG_FUNCTION_TRACER
801 CC_FLAGS_FTRACE := -pg
802endif
803
804include $(srctree)/arch/$(SRCARCH)/Makefile
805
806ifdef need-config
807ifdef may-sync-config
808# Read in dependencies to all Kconfig* files, make sure to run syncconfig if
809# changes are detected. This should be included after arch/$(SRCARCH)/Makefile
810# because some architectures define CROSS_COMPILE there.
811include include/config/auto.conf.cmd
812
813$(KCONFIG_CONFIG):
814 @echo >&2 '***'
815 @echo >&2 '*** Configuration file "$@" not found!'
816 @echo >&2 '***'
817 @echo >&2 '*** Please run some configurator (e.g. "make oldconfig" or'
818 @echo >&2 '*** "make menuconfig" or "make xconfig").'
819 @echo >&2 '***'
820 @/bin/false
821
822# The actual configuration files used during the build are stored in
823# include/generated/ and include/config/. Update them if .config is newer than
824# include/config/auto.conf (which mirrors .config).
825#
826# This exploits the 'multi-target pattern rule' trick.
827# The syncconfig should be executed only once to make all the targets.
828# (Note: use the grouped target '&:' when we bump to GNU Make 4.3)
829#
830# Do not use $(call cmd,...) here. That would suppress prompts from syncconfig,
831# so you cannot notice that Kconfig is waiting for the user input.
832%/config/auto.conf %/config/auto.conf.cmd %/generated/autoconf.h %/generated/rustc_cfg: $(KCONFIG_CONFIG)
833 $(Q)$(kecho) " SYNC $@"
834 $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
835else # !may-sync-config
836# External modules and some install targets need include/generated/autoconf.h
837# and include/config/auto.conf but do not care if they are up-to-date.
838# Use auto.conf to show the error message
839
840checked-configs := $(addprefix $(objtree)/, include/generated/autoconf.h include/generated/rustc_cfg include/config/auto.conf)
841missing-configs := $(filter-out $(wildcard $(checked-configs)), $(checked-configs))
842
843ifdef missing-configs
844PHONY += $(objtree)/include/config/auto.conf
845
846$(objtree)/include/config/auto.conf:
847 @echo >&2 '***'
848 @echo >&2 '*** ERROR: Kernel configuration is invalid. The following files are missing:'
849 @printf >&2 '*** - %s\n' $(missing-configs)
850 @echo >&2 '*** Run "make oldconfig && make prepare" on kernel source to fix it.'
851 @echo >&2 '***'
852 @/bin/false
853endif
854
855endif # may-sync-config
856endif # need-config
857
858KBUILD_CFLAGS += -fno-delete-null-pointer-checks
859
860ifdef CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE
861KBUILD_CFLAGS += -O2
862KBUILD_RUSTFLAGS += -Copt-level=2
863else ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
864KBUILD_CFLAGS += -Os
865KBUILD_RUSTFLAGS += -Copt-level=s
866endif
867
868# Always set `debug-assertions` and `overflow-checks` because their default
869# depends on `opt-level` and `debug-assertions`, respectively.
870KBUILD_RUSTFLAGS += -Cdebug-assertions=$(if $(CONFIG_RUST_DEBUG_ASSERTIONS),y,n)
871KBUILD_RUSTFLAGS += -Coverflow-checks=$(if $(CONFIG_RUST_OVERFLOW_CHECKS),y,n)
872
873# Tell gcc to never replace conditional load with a non-conditional one
874ifdef CONFIG_CC_IS_GCC
875# gcc-10 renamed --param=allow-store-data-races=0 to
876# -fno-allow-store-data-races.
877KBUILD_CFLAGS += $(call cc-option,--param=allow-store-data-races=0)
878KBUILD_CFLAGS += $(call cc-option,-fno-allow-store-data-races)
879endif
880
881ifdef CONFIG_READABLE_ASM
882# Disable optimizations that make assembler listings hard to read.
883# reorder blocks reorders the control in the function
884# ipa clone creates specialized cloned functions
885# partial inlining inlines only parts of functions
886KBUILD_CFLAGS += -fno-reorder-blocks -fno-ipa-cp-clone -fno-partial-inlining
887endif
888
889stackp-flags-y := -fno-stack-protector
890stackp-flags-$(CONFIG_STACKPROTECTOR) := -fstack-protector
891stackp-flags-$(CONFIG_STACKPROTECTOR_STRONG) := -fstack-protector-strong
892
893KBUILD_CFLAGS += $(stackp-flags-y)
894
895KBUILD_RUSTFLAGS-$(CONFIG_WERROR) += -Dwarnings
896KBUILD_RUSTFLAGS += $(KBUILD_RUSTFLAGS-y)
897
898ifdef CONFIG_FRAME_POINTER
899KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls
900KBUILD_RUSTFLAGS += -Cforce-frame-pointers=y
901else
902# Some targets (ARM with Thumb2, for example), can't be built with frame
903# pointers. For those, we don't have FUNCTION_TRACER automatically
904# select FRAME_POINTER. However, FUNCTION_TRACER adds -pg, and this is
905# incompatible with -fomit-frame-pointer with current GCC, so we don't use
906# -fomit-frame-pointer with FUNCTION_TRACER.
907# In the Rust target specification, "frame-pointer" is set explicitly
908# to "may-omit".
909ifndef CONFIG_FUNCTION_TRACER
910KBUILD_CFLAGS += -fomit-frame-pointer
911endif
912endif
913
914# Initialize all stack variables with a 0xAA pattern.
915ifdef CONFIG_INIT_STACK_ALL_PATTERN
916KBUILD_CFLAGS += -ftrivial-auto-var-init=pattern
917endif
918
919# Initialize all stack variables with a zero value.
920ifdef CONFIG_INIT_STACK_ALL_ZERO
921KBUILD_CFLAGS += -ftrivial-auto-var-init=zero
922ifdef CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_ENABLER
923# https://github.com/llvm/llvm-project/issues/44842
924CC_AUTO_VAR_INIT_ZERO_ENABLER := -enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang
925export CC_AUTO_VAR_INIT_ZERO_ENABLER
926KBUILD_CFLAGS += $(CC_AUTO_VAR_INIT_ZERO_ENABLER)
927endif
928endif
929
930# While VLAs have been removed, GCC produces unreachable stack probes
931# for the randomize_kstack_offset feature. Disable it for all compilers.
932KBUILD_CFLAGS += $(call cc-option, -fno-stack-clash-protection)
933
934# Clear used registers at func exit (to reduce data lifetime and ROP gadgets).
935ifdef CONFIG_ZERO_CALL_USED_REGS
936KBUILD_CFLAGS += -fzero-call-used-regs=used-gpr
937endif
938
939ifdef CONFIG_FUNCTION_TRACER
940ifdef CONFIG_FTRACE_MCOUNT_USE_CC
941 CC_FLAGS_FTRACE += -mrecord-mcount
942 ifdef CONFIG_HAVE_NOP_MCOUNT
943 ifeq ($(call cc-option-yn, -mnop-mcount),y)
944 CC_FLAGS_FTRACE += -mnop-mcount
945 CC_FLAGS_USING += -DCC_USING_NOP_MCOUNT
946 endif
947 endif
948endif
949ifdef CONFIG_FTRACE_MCOUNT_USE_OBJTOOL
950 ifdef CONFIG_HAVE_OBJTOOL_NOP_MCOUNT
951 CC_FLAGS_USING += -DCC_USING_NOP_MCOUNT
952 endif
953endif
954ifdef CONFIG_FTRACE_MCOUNT_USE_RECORDMCOUNT
955 ifdef CONFIG_HAVE_C_RECORDMCOUNT
956 BUILD_C_RECORDMCOUNT := y
957 export BUILD_C_RECORDMCOUNT
958 endif
959endif
960ifdef CONFIG_HAVE_FENTRY
961 # s390-linux-gnu-gcc did not support -mfentry until gcc-9.
962 ifeq ($(call cc-option-yn, -mfentry),y)
963 CC_FLAGS_FTRACE += -mfentry
964 CC_FLAGS_USING += -DCC_USING_FENTRY
965 endif
966endif
967export CC_FLAGS_FTRACE
968KBUILD_CFLAGS += $(CC_FLAGS_FTRACE) $(CC_FLAGS_USING)
969KBUILD_AFLAGS += $(CC_FLAGS_USING)
970endif
971
972# We trigger additional mismatches with less inlining
973ifdef CONFIG_DEBUG_SECTION_MISMATCH
974KBUILD_CFLAGS += -fno-inline-functions-called-once
975endif
976
977# `rustc`'s `-Zfunction-sections` applies to data too (as of 1.59.0).
978ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
979KBUILD_CFLAGS_KERNEL += -ffunction-sections -fdata-sections
980KBUILD_RUSTFLAGS_KERNEL += -Zfunction-sections=y
981LDFLAGS_vmlinux += --gc-sections
982endif
983
984ifdef CONFIG_SHADOW_CALL_STACK
985ifndef CONFIG_DYNAMIC_SCS
986CC_FLAGS_SCS := -fsanitize=shadow-call-stack
987KBUILD_CFLAGS += $(CC_FLAGS_SCS)
988KBUILD_RUSTFLAGS += -Zsanitizer=shadow-call-stack
989endif
990export CC_FLAGS_SCS
991endif
992
993ifdef CONFIG_LTO_CLANG
994ifdef CONFIG_LTO_CLANG_THIN
995CC_FLAGS_LTO := -flto=thin -fsplit-lto-unit
996else
997CC_FLAGS_LTO := -flto
998endif
999CC_FLAGS_LTO += -fvisibility=hidden
1000
1001# Limit inlining across translation units to reduce binary size
1002KBUILD_LDFLAGS += -mllvm -import-instr-limit=5
1003endif
1004
1005ifdef CONFIG_LTO
1006KBUILD_CFLAGS += -fno-lto $(CC_FLAGS_LTO)
1007KBUILD_AFLAGS += -fno-lto
1008export CC_FLAGS_LTO
1009endif
1010
1011ifdef CONFIG_CFI_CLANG
1012CC_FLAGS_CFI := -fsanitize=kcfi
1013ifdef CONFIG_CFI_ICALL_NORMALIZE_INTEGERS
1014 CC_FLAGS_CFI += -fsanitize-cfi-icall-experimental-normalize-integers
1015endif
1016ifdef CONFIG_RUST
1017 # Always pass -Zsanitizer-cfi-normalize-integers as CONFIG_RUST selects
1018 # CONFIG_CFI_ICALL_NORMALIZE_INTEGERS.
1019 RUSTC_FLAGS_CFI := -Zsanitizer=kcfi -Zsanitizer-cfi-normalize-integers
1020 KBUILD_RUSTFLAGS += $(RUSTC_FLAGS_CFI)
1021 export RUSTC_FLAGS_CFI
1022endif
1023KBUILD_CFLAGS += $(CC_FLAGS_CFI)
1024export CC_FLAGS_CFI
1025endif
1026
1027# Architectures can define flags to add/remove for floating-point support
1028CC_FLAGS_FPU += -D_LINUX_FPU_COMPILATION_UNIT
1029export CC_FLAGS_FPU
1030export CC_FLAGS_NO_FPU
1031
1032ifneq ($(CONFIG_FUNCTION_ALIGNMENT),0)
1033# Set the minimal function alignment. Use the newer GCC option
1034# -fmin-function-alignment if it is available, or fall back to -falign-funtions.
1035# See also CONFIG_CC_HAS_SANE_FUNCTION_ALIGNMENT.
1036ifdef CONFIG_CC_HAS_MIN_FUNCTION_ALIGNMENT
1037KBUILD_CFLAGS += -fmin-function-alignment=$(CONFIG_FUNCTION_ALIGNMENT)
1038else
1039KBUILD_CFLAGS += -falign-functions=$(CONFIG_FUNCTION_ALIGNMENT)
1040endif
1041endif
1042
1043# arch Makefile may override CC so keep this after arch Makefile is included
1044NOSTDINC_FLAGS += -nostdinc
1045
1046# To gain proper coverage for CONFIG_UBSAN_BOUNDS and CONFIG_FORTIFY_SOURCE,
1047# the kernel uses only C99 flexible arrays for dynamically sized trailing
1048# arrays. Enforce this for everything that may examine structure sizes and
1049# perform bounds checking.
1050KBUILD_CFLAGS += $(call cc-option, -fstrict-flex-arrays=3)
1051
1052#Currently, disable -Wstringop-overflow for GCC 11, globally.
1053KBUILD_CFLAGS-$(CONFIG_CC_NO_STRINGOP_OVERFLOW) += $(call cc-option, -Wno-stringop-overflow)
1054KBUILD_CFLAGS-$(CONFIG_CC_STRINGOP_OVERFLOW) += $(call cc-option, -Wstringop-overflow)
1055
1056# disable invalid "can't wrap" optimizations for signed / pointers
1057KBUILD_CFLAGS += -fno-strict-overflow
1058
1059# Make sure -fstack-check isn't enabled (like gentoo apparently did)
1060KBUILD_CFLAGS += -fno-stack-check
1061
1062# conserve stack if available
1063ifdef CONFIG_CC_IS_GCC
1064KBUILD_CFLAGS += -fconserve-stack
1065endif
1066
1067# change __FILE__ to the relative path to the source directory
1068ifdef building_out_of_srctree
1069KBUILD_CPPFLAGS += $(call cc-option,-fmacro-prefix-map=$(srcroot)/=)
1070endif
1071
1072# include additional Makefiles when needed
1073include-y := scripts/Makefile.extrawarn
1074include-$(CONFIG_DEBUG_INFO) += scripts/Makefile.debug
1075include-$(CONFIG_DEBUG_INFO_BTF)+= scripts/Makefile.btf
1076include-$(CONFIG_KASAN) += scripts/Makefile.kasan
1077include-$(CONFIG_KCSAN) += scripts/Makefile.kcsan
1078include-$(CONFIG_KMSAN) += scripts/Makefile.kmsan
1079include-$(CONFIG_UBSAN) += scripts/Makefile.ubsan
1080include-$(CONFIG_KCOV) += scripts/Makefile.kcov
1081include-$(CONFIG_RANDSTRUCT) += scripts/Makefile.randstruct
1082include-$(CONFIG_AUTOFDO_CLANG) += scripts/Makefile.autofdo
1083include-$(CONFIG_PROPELLER_CLANG) += scripts/Makefile.propeller
1084include-$(CONFIG_GCC_PLUGINS) += scripts/Makefile.gcc-plugins
1085
1086include $(addprefix $(srctree)/, $(include-y))
1087
1088# scripts/Makefile.gcc-plugins is intentionally included last.
1089# Do not add $(call cc-option,...) below this line. When you build the kernel
1090# from the clean source tree, the GCC plugins do not exist at this point.
1091
1092# Add user supplied CPPFLAGS, AFLAGS, CFLAGS and RUSTFLAGS as the last assignments
1093KBUILD_CPPFLAGS += $(KCPPFLAGS)
1094KBUILD_AFLAGS += $(KAFLAGS)
1095KBUILD_CFLAGS += $(KCFLAGS)
1096KBUILD_RUSTFLAGS += $(KRUSTFLAGS)
1097
1098KBUILD_LDFLAGS_MODULE += --build-id=sha1
1099LDFLAGS_vmlinux += --build-id=sha1
1100
1101KBUILD_LDFLAGS += -z noexecstack
1102ifeq ($(CONFIG_LD_IS_BFD),y)
1103KBUILD_LDFLAGS += $(call ld-option,--no-warn-rwx-segments)
1104endif
1105
1106ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
1107LDFLAGS_vmlinux += -X
1108endif
1109
1110ifeq ($(CONFIG_RELR),y)
1111# ld.lld before 15 did not support -z pack-relative-relocs.
1112LDFLAGS_vmlinux += $(call ld-option,--pack-dyn-relocs=relr,-z pack-relative-relocs)
1113endif
1114
1115# We never want expected sections to be placed heuristically by the
1116# linker. All sections should be explicitly named in the linker script.
1117ifdef CONFIG_LD_ORPHAN_WARN
1118LDFLAGS_vmlinux += --orphan-handling=$(CONFIG_LD_ORPHAN_WARN_LEVEL)
1119endif
1120
1121# Align the bit size of userspace programs with the kernel
1122KBUILD_USERCFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS))
1123KBUILD_USERLDFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS))
1124
1125# userspace programs are linked via the compiler, use the correct linker
1126ifeq ($(CONFIG_CC_IS_CLANG)$(CONFIG_LD_IS_LLD),yy)
1127KBUILD_USERLDFLAGS += --ld-path=$(LD)
1128endif
1129
1130# make the checker run with the right architecture
1131CHECKFLAGS += --arch=$(ARCH)
1132
1133# insure the checker run with the right endianness
1134CHECKFLAGS += $(if $(CONFIG_CPU_BIG_ENDIAN),-mbig-endian,-mlittle-endian)
1135
1136# the checker needs the correct machine size
1137CHECKFLAGS += $(if $(CONFIG_64BIT),-m64,-m32)
1138
1139# Default kernel image to build when no specific target is given.
1140# KBUILD_IMAGE may be overruled on the command line or
1141# set in the environment
1142# Also any assignments in arch/$(ARCH)/Makefile take precedence over
1143# this default value
1144export KBUILD_IMAGE ?= vmlinux
1145
1146#
1147# INSTALL_PATH specifies where to place the updated kernel and system map
1148# images. Default is /boot, but you can set it to other values
1149export INSTALL_PATH ?= /boot
1150
1151#
1152# INSTALL_DTBS_PATH specifies a prefix for relocations required by build roots.
1153# Like INSTALL_MOD_PATH, it isn't defined in the Makefile, but can be passed as
1154# an argument if needed. Otherwise it defaults to the kernel install path
1155#
1156export INSTALL_DTBS_PATH ?= $(INSTALL_PATH)/dtbs/$(KERNELRELEASE)
1157
1158#
1159# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
1160# relocations required by build roots. This is not defined in the
1161# makefile but the argument can be passed to make if needed.
1162#
1163
1164MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
1165export MODLIB
1166
1167PHONY += prepare0
1168
1169ifeq ($(KBUILD_EXTMOD),)
1170
1171build-dir := .
1172clean-dirs := $(sort . Documentation \
1173 $(patsubst %/,%,$(filter %/, $(core-) \
1174 $(drivers-) $(libs-))))
1175
1176export ARCH_CORE := $(core-y)
1177export ARCH_LIB := $(filter %/, $(libs-y))
1178export ARCH_DRIVERS := $(drivers-y) $(drivers-m)
1179# Externally visible symbols (used by link-vmlinux.sh)
1180
1181KBUILD_VMLINUX_OBJS := ./built-in.a
1182ifdef CONFIG_MODULES
1183KBUILD_VMLINUX_OBJS += $(patsubst %/, %/lib.a, $(filter %/, $(libs-y)))
1184KBUILD_VMLINUX_LIBS := $(filter-out %/, $(libs-y))
1185else
1186KBUILD_VMLINUX_LIBS := $(patsubst %/,%/lib.a, $(libs-y))
1187endif
1188
1189export KBUILD_VMLINUX_LIBS
1190export KBUILD_LDS := arch/$(SRCARCH)/kernel/vmlinux.lds
1191
1192ifdef CONFIG_TRIM_UNUSED_KSYMS
1193# For the kernel to actually contain only the needed exported symbols,
1194# we have to build modules as well to determine what those symbols are.
1195KBUILD_MODULES := 1
1196endif
1197
1198# '$(AR) mPi' needs 'T' to workaround the bug of llvm-ar <= 14
1199quiet_cmd_ar_vmlinux.a = AR $@
1200 cmd_ar_vmlinux.a = \
1201 rm -f $@; \
1202 $(AR) cDPrST $@ $(KBUILD_VMLINUX_OBJS); \
1203 $(AR) mPiT $$($(AR) t $@ | sed -n 1p) $@ $$($(AR) t $@ | grep -F -f $(srctree)/scripts/head-object-list.txt)
1204
1205targets += vmlinux.a
1206vmlinux.a: $(KBUILD_VMLINUX_OBJS) scripts/head-object-list.txt FORCE
1207 $(call if_changed,ar_vmlinux.a)
1208
1209PHONY += vmlinux_o
1210vmlinux_o: vmlinux.a $(KBUILD_VMLINUX_LIBS)
1211 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.vmlinux_o
1212
1213vmlinux.o modules.builtin.modinfo modules.builtin: vmlinux_o
1214 @:
1215
1216PHONY += vmlinux
1217# LDFLAGS_vmlinux in the top Makefile defines linker flags for the top vmlinux,
1218# not for decompressors. LDFLAGS_vmlinux in arch/*/boot/compressed/Makefile is
1219# unrelated; the decompressors just happen to have the same base name,
1220# arch/*/boot/compressed/vmlinux.
1221# Export LDFLAGS_vmlinux only to scripts/Makefile.vmlinux.
1222#
1223# _LDFLAGS_vmlinux is a workaround for the 'private export' bug:
1224# https://savannah.gnu.org/bugs/?61463
1225# For Make > 4.4, the following simple code will work:
1226# vmlinux: private export LDFLAGS_vmlinux := $(LDFLAGS_vmlinux)
1227vmlinux: private _LDFLAGS_vmlinux := $(LDFLAGS_vmlinux)
1228vmlinux: export LDFLAGS_vmlinux = $(_LDFLAGS_vmlinux)
1229vmlinux: __KEEPMAKEFILEO__C.o $(KBUILD_LDS) modpost
1230 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.vmlinux
1231
1232# The actual objects are generated when descending,
1233# make sure no implicit rule kicks in
1234$(sort $(KBUILD_LDS) $(KBUILD_VMLINUX_OBJS) $(KBUILD_VMLINUX_LIBS)): . ;
1235
1236ifeq ($(origin KERNELRELEASE),file)
1237filechk_kernel.release = $(srctree)/scripts/setlocalversion $(srctree)
1238else
1239filechk_kernel.release = echo $(KERNELRELEASE)
1240endif
1241
1242# Store (new) KERNELRELEASE string in include/config/kernel.release
1243include/config/kernel.release: FORCE
1244 $(call filechk,kernel.release)
1245
1246# Additional helpers built in scripts
1247# Carefully list dependencies so we do not try to build scripts twice
1248# in parallel
1249PHONY += scripts
1250scripts: scripts_basic scripts_dtc
1251 $(Q)$(MAKE) $(build)=$(@)
1252
1253# Things we need to do before we recursively start building the kernel
1254# or the modules are listed in "prepare".
1255# A multi level approach is used. prepareN is processed before prepareN-1.
1256# archprepare is used in arch Makefiles and when processed asm symlink,
1257# version.h and scripts_basic is processed / created.
1258
1259PHONY += prepare archprepare
1260
1261archprepare: outputmakefile archheaders archscripts scripts include/config/kernel.release \
1262 asm-generic $(version_h) include/generated/utsrelease.h \
1263 include/generated/compile.h include/generated/autoconf.h \
1264 include/generated/rustc_cfg remove-stale-files
1265
1266prepare0: archprepare
1267 $(Q)$(MAKE) $(build)=scripts/mod
1268 $(Q)$(MAKE) $(build)=. prepare
1269
1270# All the preparing..
1271prepare: prepare0
1272ifdef CONFIG_RUST
1273 +$(Q)$(CONFIG_SHELL) $(srctree)/scripts/rust_is_available.sh
1274 $(Q)$(MAKE) $(build)=rust
1275endif
1276
1277PHONY += remove-stale-files
1278remove-stale-files:
1279 $(Q)$(srctree)/scripts/remove-stale-files
1280
1281# Support for using generic headers in asm-generic
1282asm-generic := -f $(srctree)/scripts/Makefile.asm-headers obj
1283
1284PHONY += asm-generic uapi-asm-generic
1285asm-generic: uapi-asm-generic
1286 $(Q)$(MAKE) $(asm-generic)=arch/$(SRCARCH)/include/generated/asm \
1287 generic=include/asm-generic
1288uapi-asm-generic:
1289 $(Q)$(MAKE) $(asm-generic)=arch/$(SRCARCH)/include/generated/uapi/asm \
1290 generic=include/uapi/asm-generic
1291
1292# Generate some files
1293# ---------------------------------------------------------------------------
1294
1295# KERNELRELEASE can change from a few different places, meaning version.h
1296# needs to be updated, so this check is forced on all builds
1297
1298uts_len := 64
1299define filechk_utsrelease.h
1300 if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
1301 echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \
1302 exit 1; \
1303 fi; \
1304 echo \#define UTS_RELEASE \"$(KERNELRELEASE)\"
1305endef
1306
1307define filechk_version.h
1308 if [ $(SUBLEVEL) -gt 255 ]; then \
1309 echo \#define LINUX_VERSION_CODE $(shell \
1310 expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + 255); \
1311 else \
1312 echo \#define LINUX_VERSION_CODE $(shell \
1313 expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + $(SUBLEVEL)); \
1314 fi; \
1315 echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + \
1316 ((c) > 255 ? 255 : (c)))'; \
1317 echo \#define LINUX_VERSION_MAJOR $(VERSION); \
1318 echo \#define LINUX_VERSION_PATCHLEVEL $(PATCHLEVEL); \
1319 echo \#define LINUX_VERSION_SUBLEVEL $(SUBLEVEL)
1320endef
1321
1322$(version_h): private PATCHLEVEL := $(or $(PATCHLEVEL), 0)
1323$(version_h): private SUBLEVEL := $(or $(SUBLEVEL), 0)
1324$(version_h): FORCE
1325 $(call filechk,version.h)
1326
1327include/generated/utsrelease.h: include/config/kernel.release FORCE
1328 $(call filechk,utsrelease.h)
1329
1330filechk_compile.h = $(srctree)/scripts/mkcompile_h \
1331 "$(UTS_MACHINE)" "$(CONFIG_CC_VERSION_TEXT)" "$(LD)"
1332
1333include/generated/compile.h: FORCE
1334 $(call filechk,compile.h)
1335
1336PHONY += headerdep
1337headerdep:
1338 $(Q)find $(srctree)/include/ -name '*.h' | xargs --max-args 1 \
1339 $(srctree)/scripts/headerdep.pl -I$(srctree)/include
1340
1341# ---------------------------------------------------------------------------
1342# Kernel headers
1343
1344#Default location for installed headers
1345export INSTALL_HDR_PATH = $(objtree)/usr
1346
1347quiet_cmd_headers_install = INSTALL $(INSTALL_HDR_PATH)/include
1348 cmd_headers_install = \
1349 mkdir -p $(INSTALL_HDR_PATH); \
1350 rsync -mrl --include='*/' --include='*\.h' --exclude='*' \
1351 usr/include $(INSTALL_HDR_PATH)
1352
1353PHONY += headers_install
1354headers_install: headers
1355 $(call cmd,headers_install)
1356
1357PHONY += archheaders archscripts
1358
1359hdr-inst := -f $(srctree)/scripts/Makefile.headersinst obj
1360
1361PHONY += headers
1362headers: $(version_h) scripts_unifdef uapi-asm-generic archheaders archscripts
1363 $(if $(filter um, $(SRCARCH)), $(error Headers not exportable for UML))
1364 $(Q)$(MAKE) $(hdr-inst)=include/uapi
1365 $(Q)$(MAKE) $(hdr-inst)=arch/$(SRCARCH)/include/uapi
1366
1367ifdef CONFIG_HEADERS_INSTALL
1368prepare: headers
1369endif
1370
1371PHONY += scripts_unifdef
1372scripts_unifdef: scripts_basic
1373 $(Q)$(MAKE) $(build)=scripts scripts/unifdef
1374
1375# ---------------------------------------------------------------------------
1376# Install
1377
1378# Many distributions have the custom install script, /sbin/installkernel.
1379# If DKMS is installed, 'make install' will eventually recurse back
1380# to this Makefile to build and install external modules.
1381# Cancel sub_make_done so that options such as M=, V=, etc. are parsed.
1382
1383quiet_cmd_install = INSTALL $(INSTALL_PATH)
1384 cmd_install = unset sub_make_done; $(srctree)/scripts/install.sh
1385
1386# ---------------------------------------------------------------------------
1387# vDSO install
1388
1389PHONY += vdso_install
1390vdso_install: export INSTALL_FILES = $(vdso-install-y)
1391vdso_install:
1392 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.vdsoinst
1393
1394# ---------------------------------------------------------------------------
1395# Tools
1396
1397ifdef CONFIG_OBJTOOL
1398prepare: tools/objtool
1399endif
1400
1401ifdef CONFIG_BPF
1402ifdef CONFIG_DEBUG_INFO_BTF
1403prepare: tools/bpf/resolve_btfids
1404endif
1405endif
1406
1407# The tools build system is not a part of Kbuild and tends to introduce
1408# its own unique issues. If you need to integrate a new tool into Kbuild,
1409# please consider locating that tool outside the tools tree and using the
1410# standard Kbuild "hostprogs" syntax instead of adding a new tools/* entry
1411# here. See Documentation/kbuild/makefiles.rst for details.
1412
1413PHONY += resolve_btfids_clean
1414
1415resolve_btfids_O = $(abspath $(objtree))/tools/bpf/resolve_btfids
1416
1417# tools/bpf/resolve_btfids directory might not exist
1418# in output directory, skip its clean in that case
1419resolve_btfids_clean:
1420ifneq ($(wildcard $(resolve_btfids_O)),)
1421 $(Q)$(MAKE) -sC $(srctree)/tools/bpf/resolve_btfids O=$(resolve_btfids_O) clean
1422endif
1423
1424tools/: FORCE
1425 $(Q)mkdir -p $(objtree)/tools
1426 $(Q)$(MAKE) LDFLAGS= O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/
1427
1428tools/%: FORCE
1429 $(Q)mkdir -p $(objtree)/tools
1430 $(Q)$(MAKE) LDFLAGS= O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ $*
1431
1432# ---------------------------------------------------------------------------
1433# Kernel selftest
1434
1435PHONY += kselftest
1436kselftest: headers
1437 $(Q)$(MAKE) -C $(srctree)/tools/testing/selftests run_tests
1438
1439kselftest-%: headers FORCE
1440 $(Q)$(MAKE) -C $(srctree)/tools/testing/selftests $*
1441
1442PHONY += kselftest-merge
1443kselftest-merge:
1444 $(if $(wildcard $(objtree)/.config),, $(error No .config exists, config your kernel first!))
1445 $(Q)find $(srctree)/tools/testing/selftests -name config -o -name config.$(UTS_MACHINE) | \
1446 xargs $(srctree)/scripts/kconfig/merge_config.sh -y -m $(objtree)/.config
1447 $(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig
1448
1449# ---------------------------------------------------------------------------
1450# Devicetree files
1451
1452ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),)
1453dtstree := arch/$(SRCARCH)/boot/dts
1454endif
1455
1456ifneq ($(dtstree),)
1457
1458%.dtb: dtbs_prepare
1459 $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
1460
1461%.dtbo: dtbs_prepare
1462 $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
1463
1464PHONY += dtbs dtbs_prepare dtbs_install dtbs_check
1465dtbs: dtbs_prepare
1466 $(Q)$(MAKE) $(build)=$(dtstree) need-dtbslist=1
1467
1468# include/config/kernel.release is actually needed when installing DTBs because
1469# INSTALL_DTBS_PATH contains $(KERNELRELEASE). However, we do not want to make
1470# dtbs_install depend on it as dtbs_install may run as root.
1471dtbs_prepare: include/config/kernel.release scripts_dtc
1472
1473ifneq ($(filter dtbs_check, $(MAKECMDGOALS)),)
1474export CHECK_DTBS=y
1475endif
1476
1477ifneq ($(CHECK_DTBS),)
1478dtbs_prepare: dt_binding_schemas
1479endif
1480
1481dtbs_check: dtbs
1482
1483dtbs_install:
1484 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.dtbinst obj=$(dtstree)
1485
1486ifdef CONFIG_OF_EARLY_FLATTREE
1487all: dtbs
1488endif
1489
1490ifdef CONFIG_GENERIC_BUILTIN_DTB
1491vmlinux: dtbs
1492endif
1493
1494endif
1495
1496PHONY += scripts_dtc
1497scripts_dtc: scripts_basic
1498 $(Q)$(MAKE) $(build)=scripts/dtc
1499
1500ifneq ($(filter dt_binding_check, $(MAKECMDGOALS)),)
1501export CHECK_DTBS=y
1502endif
1503
1504PHONY += dt_binding_check dt_binding_schemas
1505dt_binding_check: dt_binding_schemas scripts_dtc
1506 $(Q)$(MAKE) $(build)=Documentation/devicetree/bindings $@
1507
1508dt_binding_schemas:
1509 $(Q)$(MAKE) $(build)=Documentation/devicetree/bindings
1510
1511PHONY += dt_compatible_check
1512dt_compatible_check: dt_binding_schemas
1513 $(Q)$(MAKE) $(build)=Documentation/devicetree/bindings $@
1514
1515# ---------------------------------------------------------------------------
1516# Modules
1517
1518ifdef CONFIG_MODULES
1519
1520# By default, build modules as well
1521
1522all: modules
1523
1524# When we're building modules with modversions, we need to consider
1525# the built-in objects during the descend as well, in order to
1526# make sure the checksums are up to date before we record them.
1527ifdef CONFIG_MODVERSIONS
1528 KBUILD_BUILTIN := 1
1529endif
1530
1531# Build modules
1532#
1533
1534# *.ko are usually independent of vmlinux, but CONFIG_DEBUG_INFO_BTF_MODULES
1535# is an exception.
1536ifdef CONFIG_DEBUG_INFO_BTF_MODULES
1537KBUILD_BUILTIN := 1
1538modules: vmlinux
1539endif
1540
1541modules: modules_prepare
1542
1543# Target to prepare building external modules
1544modules_prepare: prepare
1545 $(Q)$(MAKE) $(build)=scripts scripts/module.lds
1546
1547endif # CONFIG_MODULES
1548
1549###
1550# Cleaning is done on three levels.
1551# make clean Delete most generated files
1552# Leave enough to build external modules
1553# make mrproper Delete the current configuration, and all generated files
1554# make distclean Remove editor backup files, patch leftover files and the like
1555
1556# Directories & files removed with 'make clean'
1557CLEAN_FILES += vmlinux.symvers modules-only.symvers \
1558 modules.builtin modules.builtin.modinfo modules.nsdeps \
1559 modules.builtin.ranges vmlinux.o.map \
1560 compile_commands.json rust/test \
1561 rust-project.json .vmlinux.objs .vmlinux.export.c \
1562 .builtin-dtbs-list .builtin-dtb.S
1563
1564# Directories & files removed with 'make mrproper'
1565MRPROPER_FILES += include/config include/generated \
1566 arch/$(SRCARCH)/include/generated .objdiff \
1567 debian snap tar-install PKGBUILD pacman \
1568 .config .config.old .version \
1569 Module.symvers \
1570 certs/signing_key.pem \
1571 certs/x509.genkey \
1572 vmlinux-gdb.py \
1573 rpmbuild \
1574 rust/libmacros.so
1575
1576# clean - Delete most, but leave enough to build external modules
1577#
1578clean: private rm-files := $(CLEAN_FILES)
1579
1580PHONY += archclean vmlinuxclean
1581
1582vmlinuxclean:
1583 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/link-vmlinux.sh clean
1584 $(Q)$(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) clean)
1585
1586clean: archclean vmlinuxclean resolve_btfids_clean
1587
1588# mrproper - Delete all generated files, including .config
1589#
1590mrproper: private rm-files := $(MRPROPER_FILES)
1591mrproper-dirs := $(addprefix _mrproper_,scripts)
1592
1593PHONY += $(mrproper-dirs) mrproper
1594$(mrproper-dirs):
1595 $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
1596
1597mrproper: clean $(mrproper-dirs)
1598 $(call cmd,rmfiles)
1599 @find . $(RCS_FIND_IGNORE) \
1600 \( -name '*.rmeta' \) \
1601 -type f -print | xargs rm -f
1602
1603# distclean
1604#
1605PHONY += distclean
1606
1607distclean: mrproper
1608 @find . $(RCS_FIND_IGNORE) \
1609 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
1610 -o -name '*.bak' -o -name '#*#' -o -name '*%' \
1611 -o -name 'core' -o -name tags -o -name TAGS -o -name 'cscope*' \
1612 -o -name GPATH -o -name GRTAGS -o -name GSYMS -o -name GTAGS \) \
1613 -type f -print | xargs rm -f
1614
1615
1616# Packaging of the kernel to various formats
1617# ---------------------------------------------------------------------------
1618
1619%src-pkg: FORCE
1620 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.package $@
1621%pkg: include/config/kernel.release FORCE
1622 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.package $@
1623
1624# Brief documentation of the typical targets used
1625# ---------------------------------------------------------------------------
1626
1627boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig)
1628boards := $(sort $(notdir $(boards)))
1629board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig))
1630board-dirs := $(sort $(notdir $(board-dirs:/=)))
1631
1632PHONY += help
1633help:
1634 @echo 'Cleaning targets:'
1635 @echo ' clean - Remove most generated files but keep the config and'
1636 @echo ' enough build support to build external modules'
1637 @echo ' mrproper - Remove all generated files + config + various backup files'
1638 @echo ' distclean - mrproper + remove editor backup and patch files'
1639 @echo ''
1640 @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
1641 @echo ''
1642 @echo 'Other generic targets:'
1643 @echo ' all - Build all targets marked with [*]'
1644 @echo '* vmlinux - Build the bare kernel'
1645 @echo '* modules - Build all modules'
1646 @echo ' modules_install - Install all modules to INSTALL_MOD_PATH (default: /)'
1647 @echo ' vdso_install - Install unstripped vdso to INSTALL_MOD_PATH (default: /)'
1648 @echo ' dir/ - Build all files in dir and below'
1649 @echo ' dir/file.[ois] - Build specified target only'
1650 @echo ' dir/file.ll - Build the LLVM assembly file'
1651 @echo ' (requires compiler support for LLVM assembly generation)'
1652 @echo ' dir/file.lst - Build specified mixed source/assembly target only'
1653 @echo ' (requires a recent binutils and recent build (System.map))'
1654 @echo ' dir/file.ko - Build module including final link'
1655 @echo ' modules_prepare - Set up for building external modules'
1656 @echo ' tags/TAGS - Generate tags file for editors'
1657 @echo ' cscope - Generate cscope index'
1658 @echo ' gtags - Generate GNU GLOBAL index'
1659 @echo ' kernelrelease - Output the release version string (use with make -s)'
1660 @echo ' kernelversion - Output the version stored in Makefile (use with make -s)'
1661 @echo ' image_name - Output the image name (use with make -s)'
1662 @echo ' headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
1663 echo ' (default: $(INSTALL_HDR_PATH))'; \
1664 echo ''
1665 @echo 'Static analysers:'
1666 @echo ' checkstack - Generate a list of stack hogs and consider all functions'
1667 @echo ' with a stack size larger than MINSTACKSIZE (default: 100)'
1668 @echo ' versioncheck - Sanity check on version.h usage'
1669 @echo ' includecheck - Check for duplicate included header files'
1670 @echo ' headerdep - Detect inclusion cycles in headers'
1671 @echo ' coccicheck - Check with Coccinelle'
1672 @echo ' clang-analyzer - Check with clang static analyzer'
1673 @echo ' clang-tidy - Check with clang-tidy'
1674 @echo ''
1675 @echo 'Tools:'
1676 @echo ' nsdeps - Generate missing symbol namespace dependencies'
1677 @echo ''
1678 @echo 'Kernel selftest:'
1679 @echo ' kselftest - Build and run kernel selftest'
1680 @echo ' Build, install, and boot kernel before'
1681 @echo ' running kselftest on it'
1682 @echo ' Run as root for full coverage'
1683 @echo ' kselftest-all - Build kernel selftest'
1684 @echo ' kselftest-install - Build and install kernel selftest'
1685 @echo ' kselftest-clean - Remove all generated kselftest files'
1686 @echo ' kselftest-merge - Merge all the config dependencies of'
1687 @echo ' kselftest to existing .config.'
1688 @echo ''
1689 @echo 'Rust targets:'
1690 @echo ' rustavailable - Checks whether the Rust toolchain is'
1691 @echo ' available and, if not, explains why.'
1692 @echo ' rustfmt - Reformat all the Rust code in the kernel'
1693 @echo ' rustfmtcheck - Checks if all the Rust code in the kernel'
1694 @echo ' is formatted, printing a diff otherwise.'
1695 @echo ' rustdoc - Generate Rust documentation'
1696 @echo ' (requires kernel .config)'
1697 @echo ' rusttest - Runs the Rust tests'
1698 @echo ' (requires kernel .config; downloads external repos)'
1699 @echo ' rust-analyzer - Generate rust-project.json rust-analyzer support file'
1700 @echo ' (requires kernel .config)'
1701 @echo ' dir/file.[os] - Build specified target only'
1702 @echo ' dir/file.rsi - Build macro expanded source, similar to C preprocessing.'
1703 @echo ' Run with RUSTFMT=n to skip reformatting if needed.'
1704 @echo ' The output is not intended to be compilable.'
1705 @echo ' dir/file.ll - Build the LLVM assembly file'
1706 @echo ''
1707 @$(if $(dtstree), \
1708 echo 'Devicetree:'; \
1709 echo '* dtbs - Build device tree blobs for enabled boards'; \
1710 echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'; \
1711 echo ' dt_binding_check - Validate device tree binding documents and examples'; \
1712 echo ' dt_binding_schemas - Build processed device tree binding schemas'; \
1713 echo ' dtbs_check - Validate device tree source files';\
1714 echo '')
1715
1716 @echo 'Userspace tools targets:'
1717 @echo ' use "make tools/help"'
1718 @echo ' or "cd tools; make help"'
1719 @echo ''
1720 @echo 'Kernel packaging:'
1721 @$(MAKE) -f $(srctree)/scripts/Makefile.package help
1722 @echo ''
1723 @echo 'Documentation targets:'
1724 @$(MAKE) -f $(srctree)/Documentation/Makefile dochelp
1725 @echo ''
1726 @echo 'Architecture-specific targets ($(SRCARCH)):'
1727 @$(or $(archhelp),\
1728 echo ' No architecture-specific help defined for $(SRCARCH)')
1729 @echo ''
1730 @$(if $(boards), \
1731 $(foreach b, $(boards), \
1732 printf " %-27s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \
1733 echo '')
1734 @$(if $(board-dirs), \
1735 $(foreach b, $(board-dirs), \
1736 printf " %-16s - Show %s-specific targets\\n" help-$(b) $(b);) \
1737 printf " %-16s - Show all of the above\\n" help-boards; \
1738 echo '')
1739
1740 @echo ' make V=n [targets] 1: verbose build'
1741 @echo ' 2: give reason for rebuild of target'
1742 @echo ' V=1 and V=2 can be combined with V=12'
1743 @echo ' make O=dir [targets] Locate all output files in "dir", including .config'
1744 @echo ' make C=1 [targets] Check re-compiled c source with $$CHECK'
1745 @echo ' (sparse by default)'
1746 @echo ' make C=2 [targets] Force check of all c source with $$CHECK'
1747 @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
1748 @echo ' make W=n [targets] Enable extra build checks, n=1,2,3,c,e where'
1749 @echo ' 1: warnings which may be relevant and do not occur too often'
1750 @echo ' 2: warnings which occur quite often but may still be relevant'
1751 @echo ' 3: more obscure warnings, can most likely be ignored'
1752 @echo ' c: extra checks in the configuration stage (Kconfig)'
1753 @echo ' e: warnings are being treated as errors'
1754 @echo ' Multiple levels can be combined with W=12 or W=123'
1755 @$(if $(dtstree), \
1756 echo ' make CHECK_DTBS=1 [targets] Check all generated dtb files against schema'; \
1757 echo ' This can be applied both to "dtbs" and to individual "foo.dtb" targets' ; \
1758 )
1759 @echo ''
1760 @echo 'Execute "make" or "make all" to build all targets marked with [*] '
1761 @echo 'For further info see the ./README file'
1762
1763
1764help-board-dirs := $(addprefix help-,$(board-dirs))
1765
1766help-boards: $(help-board-dirs)
1767
1768boards-per-dir = $(sort $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig)))
1769
1770$(help-board-dirs): help-%:
1771 @echo 'Architecture-specific targets ($(SRCARCH) $*):'
1772 @$(if $(boards-per-dir), \
1773 $(foreach b, $(boards-per-dir), \
1774 printf " %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \
1775 echo '')
1776
1777
1778# Documentation targets
1779# ---------------------------------------------------------------------------
1780DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \
1781 linkcheckdocs dochelp refcheckdocs texinfodocs infodocs
1782PHONY += $(DOC_TARGETS)
1783$(DOC_TARGETS):
1784 $(Q)$(MAKE) $(build)=Documentation $@
1785
1786
1787# Rust targets
1788# ---------------------------------------------------------------------------
1789
1790# "Is Rust available?" target
1791PHONY += rustavailable
1792rustavailable:
1793 +$(Q)$(CONFIG_SHELL) $(srctree)/scripts/rust_is_available.sh && echo "Rust is available!"
1794
1795# Documentation target
1796#
1797# Using the singular to avoid running afoul of `no-dot-config-targets`.
1798PHONY += rustdoc
1799rustdoc: prepare
1800 $(Q)$(MAKE) $(build)=rust $@
1801
1802# Testing target
1803PHONY += rusttest
1804rusttest: prepare
1805 $(Q)$(MAKE) $(build)=rust $@
1806
1807# Formatting targets
1808PHONY += rustfmt rustfmtcheck
1809
1810rustfmt:
1811 $(Q)find $(srctree) $(RCS_FIND_IGNORE) \
1812 -type f -a -name '*.rs' -a ! -name '*generated*' -print \
1813 | xargs $(RUSTFMT) $(rustfmt_flags)
1814
1815rustfmtcheck: rustfmt_flags = --check
1816rustfmtcheck: rustfmt
1817
1818# Misc
1819# ---------------------------------------------------------------------------
1820
1821PHONY += misc-check
1822misc-check:
1823 $(Q)$(srctree)/scripts/misc-check
1824
1825all: misc-check
1826
1827PHONY += scripts_gdb
1828scripts_gdb: prepare0
1829 $(Q)$(MAKE) $(build)=scripts/gdb
1830 $(Q)ln -fsn $(abspath $(srctree)/scripts/gdb/vmlinux-gdb.py)
1831
1832ifdef CONFIG_GDB_SCRIPTS
1833all: scripts_gdb
1834endif
1835
1836else # KBUILD_EXTMOD
1837
1838filechk_kernel.release = echo $(KERNELRELEASE)
1839
1840###
1841# External module support.
1842# When building external modules the kernel used as basis is considered
1843# read-only, and no consistency checks are made and the make
1844# system is not used on the basis kernel. If updates are required
1845# in the basis kernel ordinary make commands (without M=...) must be used.
1846
1847# We are always building only modules.
1848KBUILD_BUILTIN :=
1849KBUILD_MODULES := 1
1850
1851build-dir := .
1852
1853clean-dirs := .
1854clean: private rm-files := Module.symvers modules.nsdeps compile_commands.json
1855
1856PHONY += prepare
1857# now expand this into a simple variable to reduce the cost of shell evaluations
1858prepare: CC_VERSION_TEXT := $(CC_VERSION_TEXT)
1859prepare:
1860 @if [ "$(CC_VERSION_TEXT)" != "$(CONFIG_CC_VERSION_TEXT)" ]; then \
1861 echo >&2 "warning: the compiler differs from the one used to build the kernel"; \
1862 echo >&2 " The kernel was built by: $(CONFIG_CC_VERSION_TEXT)"; \
1863 echo >&2 " You are using: $(CC_VERSION_TEXT)"; \
1864 fi
1865
1866PHONY += help
1867help:
1868 @echo ' Building external modules.'
1869 @echo ' Syntax: make -C path/to/kernel/src M=$$PWD target'
1870 @echo ''
1871 @echo ' modules - default target, build the module(s)'
1872 @echo ' modules_install - install the module'
1873 @echo ' clean - remove generated files in module directory only'
1874 @echo ' rust-analyzer - generate rust-project.json rust-analyzer support file'
1875 @echo ''
1876
1877ifndef CONFIG_MODULES
1878modules modules_install: __external_modules_error
1879__external_modules_error:
1880 @echo >&2 '***'
1881 @echo >&2 '*** The present kernel disabled CONFIG_MODULES.'
1882 @echo >&2 '*** You cannot build or install external modules.'
1883 @echo >&2 '***'
1884 @false
1885endif
1886
1887endif # KBUILD_EXTMOD
1888
1889# ---------------------------------------------------------------------------
1890# Modules
1891
1892PHONY += modules modules_install modules_sign modules_prepare
1893
1894modules_install:
1895 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst \
1896 sign-only=$(if $(filter modules_install,$(MAKECMDGOALS)),,y)
1897
1898ifeq ($(CONFIG_MODULE_SIG),y)
1899# modules_sign is a subset of modules_install.
1900# 'make modules_install modules_sign' is equivalent to 'make modules_install'.
1901modules_sign: modules_install
1902 @:
1903else
1904modules_sign:
1905 @echo >&2 '***'
1906 @echo >&2 '*** CONFIG_MODULE_SIG is disabled. You cannot sign modules.'
1907 @echo >&2 '***'
1908 @false
1909endif
1910
1911ifdef CONFIG_MODULES
1912
1913modules.order: $(build-dir)
1914 @:
1915
1916# KBUILD_MODPOST_NOFINAL can be set to skip the final link of modules.
1917# This is solely useful to speed up test compiles.
1918modules: modpost
1919ifneq ($(KBUILD_MODPOST_NOFINAL),1)
1920 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modfinal
1921endif
1922
1923PHONY += modules_check
1924modules_check: modules.order
1925 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/modules-check.sh $<
1926
1927else # CONFIG_MODULES
1928
1929modules:
1930 @:
1931
1932KBUILD_MODULES :=
1933
1934endif # CONFIG_MODULES
1935
1936PHONY += modpost
1937modpost: $(if $(single-build),, $(if $(KBUILD_BUILTIN), vmlinux.o)) \
1938 $(if $(KBUILD_MODULES), modules_check)
1939 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1940
1941# Single targets
1942# ---------------------------------------------------------------------------
1943# To build individual files in subdirectories, you can do like this:
1944#
1945# make foo/bar/baz.s
1946#
1947# The supported suffixes for single-target are listed in 'single-targets'
1948#
1949# To build only under specific subdirectories, you can do like this:
1950#
1951# make foo/bar/baz/
1952
1953ifdef single-build
1954
1955# .ko is special because modpost is needed
1956single-ko := $(sort $(filter %.ko, $(MAKECMDGOALS)))
1957single-no-ko := $(filter-out $(single-ko), $(MAKECMDGOALS)) \
1958 $(foreach x, o mod, $(patsubst %.ko, %.$x, $(single-ko)))
1959
1960$(single-ko): single_modules
1961 @:
1962$(single-no-ko): $(build-dir)
1963 @:
1964
1965# Remove modules.order when done because it is not the real one.
1966PHONY += single_modules
1967single_modules: $(single-no-ko) modules_prepare
1968 $(Q){ $(foreach m, $(single-ko), echo $(m:%.ko=%.o);) } > modules.order
1969 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1970ifneq ($(KBUILD_MODPOST_NOFINAL),1)
1971 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modfinal
1972endif
1973 $(Q)rm -f modules.order
1974
1975single-goals := $(addprefix $(build-dir)/, $(single-no-ko))
1976
1977KBUILD_MODULES := 1
1978
1979endif
1980
1981prepare: outputmakefile
1982
1983# Preset locale variables to speed up the build process. Limit locale
1984# tweaks to this spot to avoid wrong language settings when running
1985# make menuconfig etc.
1986# Error messages still appears in the original language
1987PHONY += $(build-dir)
1988$(build-dir): prepare
1989 $(Q)$(MAKE) $(build)=$@ need-builtin=1 need-modorder=1 $(single-goals)
1990
1991clean-dirs := $(addprefix _clean_, $(clean-dirs))
1992PHONY += $(clean-dirs) clean
1993$(clean-dirs):
1994 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1995
1996clean: $(clean-dirs)
1997 $(call cmd,rmfiles)
1998 @find . $(RCS_FIND_IGNORE) \
1999 \( -name '*.[aios]' -o -name '*.rsi' -o -name '*.ko' -o -name '.*.cmd' \
2000 -o -name '*.ko.*' \
2001 -o -name '*.dtb' -o -name '*.dtbo' \
2002 -o -name '*.dtb.S' -o -name '*.dtbo.S' \
2003 -o -name '*.dt.yaml' -o -name 'dtbs-list' \
2004 -o -name '*.dwo' -o -name '*.lst' \
2005 -o -name '*.su' -o -name '*.mod' \
2006 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
2007 -o -name '*.lex.c' -o -name '*.tab.[ch]' \
2008 -o -name '*.asn1.[ch]' \
2009 -o -name '*.symtypes' -o -name 'modules.order' \
2010 -o -name '*.c.[012]*.*' \
2011 -o -name '*.ll' \
2012 -o -name '*.gcno' \
2013 \) -type f -print \
2014 -o -name '.tmp_*' -print \
2015 | xargs rm -rf
2016
2017# Generate tags for editors
2018# ---------------------------------------------------------------------------
2019quiet_cmd_tags = GEN $@
2020 cmd_tags = $(BASH) $(srctree)/scripts/tags.sh $@
2021
2022tags TAGS cscope gtags: FORCE
2023 $(call cmd,tags)
2024
2025# Generate rust-project.json (a file that describes the structure of non-Cargo
2026# Rust projects) for rust-analyzer (an implementation of the Language Server
2027# Protocol).
2028PHONY += rust-analyzer
2029rust-analyzer:
2030 +$(Q)$(CONFIG_SHELL) $(srctree)/scripts/rust_is_available.sh
2031ifdef KBUILD_EXTMOD
2032# FIXME: external modules must not descend into a sub-directory of the kernel
2033 $(Q)$(MAKE) $(build)=$(objtree)/rust src=$(srctree)/rust $@
2034else
2035 $(Q)$(MAKE) $(build)=rust $@
2036endif
2037
2038# Script to generate missing namespace dependencies
2039# ---------------------------------------------------------------------------
2040
2041PHONY += nsdeps
2042nsdeps: export KBUILD_NSDEPS=1
2043nsdeps: modules
2044 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/nsdeps
2045
2046# Clang Tooling
2047# ---------------------------------------------------------------------------
2048
2049quiet_cmd_gen_compile_commands = GEN $@
2050 cmd_gen_compile_commands = $(PYTHON3) $< -a $(AR) -o $@ $(filter-out $<, $(real-prereqs))
2051
2052compile_commands.json: $(srctree)/scripts/clang-tools/gen_compile_commands.py \
2053 $(if $(KBUILD_EXTMOD),, vmlinux.a $(KBUILD_VMLINUX_LIBS)) \
2054 $(if $(CONFIG_MODULES), modules.order) FORCE
2055 $(call if_changed,gen_compile_commands)
2056
2057targets += compile_commands.json
2058
2059PHONY += clang-tidy clang-analyzer
2060
2061ifdef CONFIG_CC_IS_CLANG
2062quiet_cmd_clang_tools = CHECK $<
2063 cmd_clang_tools = $(PYTHON3) $(srctree)/scripts/clang-tools/run-clang-tools.py $@ $<
2064
2065clang-tidy clang-analyzer: compile_commands.json
2066 $(call cmd,clang_tools)
2067else
2068clang-tidy clang-analyzer:
2069 @echo "$@ requires CC=clang" >&2
2070 @false
2071endif
2072
2073# Scripts to check various things for consistency
2074# ---------------------------------------------------------------------------
2075
2076PHONY += includecheck versioncheck coccicheck
2077
2078includecheck:
2079 find $(srctree)/* $(RCS_FIND_IGNORE) \
2080 -name '*.[hcS]' -type f -print | sort \
2081 | xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl
2082
2083versioncheck:
2084 find $(srctree)/* $(RCS_FIND_IGNORE) \
2085 -name '*.[hcS]' -type f -print | sort \
2086 | xargs $(PERL) -w $(srctree)/scripts/checkversion.pl
2087
2088coccicheck:
2089 $(Q)$(BASH) $(srctree)/scripts/$@
2090
2091PHONY += checkstack kernelrelease kernelversion image_name
2092
2093# UML needs a little special treatment here. It wants to use the host
2094# toolchain, so needs $(SUBARCH) passed to checkstack.pl. Everyone
2095# else wants $(ARCH), including people doing cross-builds, which means
2096# that $(SUBARCH) doesn't work here.
2097ifeq ($(ARCH), um)
2098CHECKSTACK_ARCH := $(SUBARCH)
2099else
2100CHECKSTACK_ARCH := $(ARCH)
2101endif
2102MINSTACKSIZE ?= 100
2103checkstack:
2104 $(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
2105 $(PERL) $(srctree)/scripts/checkstack.pl $(CHECKSTACK_ARCH) $(MINSTACKSIZE)
2106
2107kernelrelease:
2108 @$(filechk_kernel.release)
2109
2110kernelversion:
2111 @echo $(KERNELVERSION)
2112
2113image_name:
2114 @echo $(KBUILD_IMAGE)
2115
2116PHONY += run-command
2117run-command:
2118 $(Q)$(KBUILD_RUN_COMMAND)
2119
2120quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
2121 cmd_rmfiles = rm -rf $(rm-files)
2122
2123# read saved command lines for existing targets
2124existing-targets := $(wildcard $(sort $(targets)))
2125
2126-include $(foreach f,$(existing-targets),$(dir $(f)).$(notdir $(f)).cmd)
2127
2128endif # config-build
2129endif # mixed-build
2130endif # need-sub-make
2131
2132PHONY += FORCE
2133FORCE:
2134
2135# Declare the contents of the PHONY variable as phony. We keep that
2136# information in a variable so we can use it in if_changed and friends.
2137.PHONY: $(PHONY)
1VERSION = 3
2PATCHLEVEL = 1
3SUBLEVEL = 0
4EXTRAVERSION =
5NAME = "Divemaster Edition"
6
7# *DOCUMENTATION*
8# To see a list of typical targets execute "make help"
9# More info can be located in ./README
10# Comments in this file are targeted only to the developer, do not
11# expect to learn how to build the kernel reading this file.
12
13# Do not:
14# o use make's built-in rules and variables
15# (this increases performance and avoids hard-to-debug behaviour);
16# o print "Entering directory ...";
17MAKEFLAGS += -rR --no-print-directory
18
19# Avoid funny character set dependencies
20unexport LC_ALL
21LC_COLLATE=C
22LC_NUMERIC=C
23export LC_COLLATE LC_NUMERIC
24
25# We are using a recursive build, so we need to do a little thinking
26# to get the ordering right.
27#
28# Most importantly: sub-Makefiles should only ever modify files in
29# their own directory. If in some directory we have a dependency on
30# a file in another dir (which doesn't happen often, but it's often
31# unavoidable when linking the built-in.o targets which finally
32# turn into vmlinux), we will call a sub make in that other dir, and
33# after that we are sure that everything which is in that other dir
34# is now up to date.
35#
36# The only cases where we need to modify files which have global
37# effects are thus separated out and done before the recursive
38# descending is started. They are now explicitly listed as the
39# prepare rule.
40
41# To put more focus on warnings, be less verbose as default
42# Use 'make V=1' to see the full commands
43
44ifeq ("$(origin V)", "command line")
45 KBUILD_VERBOSE = $(V)
46endif
47ifndef KBUILD_VERBOSE
48 KBUILD_VERBOSE = 0
49endif
50
51# Call a source code checker (by default, "sparse") as part of the
52# C compilation.
53#
54# Use 'make C=1' to enable checking of only re-compiled files.
55# Use 'make C=2' to enable checking of *all* source files, regardless
56# of whether they are re-compiled or not.
57#
58# See the file "Documentation/sparse.txt" for more details, including
59# where to get the "sparse" utility.
60
61ifeq ("$(origin C)", "command line")
62 KBUILD_CHECKSRC = $(C)
63endif
64ifndef KBUILD_CHECKSRC
65 KBUILD_CHECKSRC = 0
66endif
67
68# Use make M=dir to specify directory of external module to build
69# Old syntax make ... SUBDIRS=$PWD is still supported
70# Setting the environment variable KBUILD_EXTMOD take precedence
71ifdef SUBDIRS
72 KBUILD_EXTMOD ?= $(SUBDIRS)
73endif
74
75ifeq ("$(origin M)", "command line")
76 KBUILD_EXTMOD := $(M)
77endif
78
79# kbuild supports saving output files in a separate directory.
80# To locate output files in a separate directory two syntaxes are supported.
81# In both cases the working directory must be the root of the kernel src.
82# 1) O=
83# Use "make O=dir/to/store/output/files/"
84#
85# 2) Set KBUILD_OUTPUT
86# Set the environment variable KBUILD_OUTPUT to point to the directory
87# where the output files shall be placed.
88# export KBUILD_OUTPUT=dir/to/store/output/files/
89# make
90#
91# The O= assignment takes precedence over the KBUILD_OUTPUT environment
92# variable.
93
94
95# KBUILD_SRC is set on invocation of make in OBJ directory
96# KBUILD_SRC is not intended to be used by the regular user (for now)
97ifeq ($(KBUILD_SRC),)
98
99# OK, Make called in directory where kernel src resides
100# Do we want to locate output files in a separate directory?
101ifeq ("$(origin O)", "command line")
102 KBUILD_OUTPUT := $(O)
103endif
104
105ifeq ("$(origin W)", "command line")
106 export KBUILD_ENABLE_EXTRA_GCC_CHECKS := $(W)
107endif
108
109# That's our default target when none is given on the command line
110PHONY := _all
111_all:
112
113# Cancel implicit rules on top Makefile
114$(CURDIR)/Makefile Makefile: ;
115
116ifneq ($(KBUILD_OUTPUT),)
117# Invoke a second make in the output directory, passing relevant variables
118# check that the output directory actually exists
119saved-output := $(KBUILD_OUTPUT)
120KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
121$(if $(KBUILD_OUTPUT),, \
122 $(error output directory "$(saved-output)" does not exist))
123
124PHONY += $(MAKECMDGOALS) sub-make
125
126$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
127 $(Q)@:
128
129sub-make: FORCE
130 $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
131 KBUILD_SRC=$(CURDIR) \
132 KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \
133 $(filter-out _all sub-make,$(MAKECMDGOALS))
134
135# Leave processing to above invocation of make
136skip-makefile := 1
137endif # ifneq ($(KBUILD_OUTPUT),)
138endif # ifeq ($(KBUILD_SRC),)
139
140# We process the rest of the Makefile if this is the final invocation of make
141ifeq ($(skip-makefile),)
142
143# If building an external module we do not care about the all: rule
144# but instead _all depend on modules
145PHONY += all
146ifeq ($(KBUILD_EXTMOD),)
147_all: all
148else
149_all: modules
150endif
151
152srctree := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
153objtree := $(CURDIR)
154src := $(srctree)
155obj := $(objtree)
156
157VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
158
159export srctree objtree VPATH
160
161
162# SUBARCH tells the usermode build what the underlying arch is. That is set
163# first, and if a usermode build is happening, the "ARCH=um" on the command
164# line overrides the setting of ARCH below. If a native build is happening,
165# then ARCH is assigned, getting whatever value it gets normally, and
166# SUBARCH is subsequently ignored.
167
168SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64 \
169 -e s/arm.*/arm/ -e s/sa110/arm/ \
170 -e s/s390x/s390/ -e s/parisc64/parisc/ \
171 -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
172 -e s/sh[234].*/sh/ )
173
174# Cross compiling and selecting different set of gcc/bin-utils
175# ---------------------------------------------------------------------------
176#
177# When performing cross compilation for other architectures ARCH shall be set
178# to the target architecture. (See arch/* for the possibilities).
179# ARCH can be set during invocation of make:
180# make ARCH=ia64
181# Another way is to have ARCH set in the environment.
182# The default ARCH is the host where make is executed.
183
184# CROSS_COMPILE specify the prefix used for all executables used
185# during compilation. Only gcc and related bin-utils executables
186# are prefixed with $(CROSS_COMPILE).
187# CROSS_COMPILE can be set on the command line
188# make CROSS_COMPILE=ia64-linux-
189# Alternatively CROSS_COMPILE can be set in the environment.
190# A third alternative is to store a setting in .config so that plain
191# "make" in the configured kernel build directory always uses that.
192# Default value for CROSS_COMPILE is not to prefix executables
193# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
194export KBUILD_BUILDHOST := $(SUBARCH)
195ARCH ?= $(SUBARCH)
196CROSS_COMPILE ?= $(CONFIG_CROSS_COMPILE:"%"=%)
197
198# Architecture as present in compile.h
199UTS_MACHINE := $(ARCH)
200SRCARCH := $(ARCH)
201
202# Additional ARCH settings for x86
203ifeq ($(ARCH),i386)
204 SRCARCH := x86
205endif
206ifeq ($(ARCH),x86_64)
207 SRCARCH := x86
208endif
209
210# Additional ARCH settings for sparc
211ifeq ($(ARCH),sparc32)
212 SRCARCH := sparc
213endif
214ifeq ($(ARCH),sparc64)
215 SRCARCH := sparc
216endif
217
218# Additional ARCH settings for sh
219ifeq ($(ARCH),sh64)
220 SRCARCH := sh
221endif
222
223# Additional ARCH settings for tile
224ifeq ($(ARCH),tilepro)
225 SRCARCH := tile
226endif
227ifeq ($(ARCH),tilegx)
228 SRCARCH := tile
229endif
230
231# Where to locate arch specific headers
232hdr-arch := $(SRCARCH)
233
234ifeq ($(ARCH),m68knommu)
235 hdr-arch := m68k
236endif
237
238KCONFIG_CONFIG ?= .config
239export KCONFIG_CONFIG
240
241# SHELL used by kbuild
242CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
243 else if [ -x /bin/bash ]; then echo /bin/bash; \
244 else echo sh; fi ; fi)
245
246HOSTCC = gcc
247HOSTCXX = g++
248HOSTCFLAGS = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer
249HOSTCXXFLAGS = -O2
250
251# Decide whether to build built-in, modular, or both.
252# Normally, just do built-in.
253
254KBUILD_MODULES :=
255KBUILD_BUILTIN := 1
256
257# If we have only "make modules", don't compile built-in objects.
258# When we're building modules with modversions, we need to consider
259# the built-in objects during the descend as well, in order to
260# make sure the checksums are up to date before we record them.
261
262ifeq ($(MAKECMDGOALS),modules)
263 KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
264endif
265
266# If we have "make <whatever> modules", compile modules
267# in addition to whatever we do anyway.
268# Just "make" or "make all" shall build modules as well
269
270ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
271 KBUILD_MODULES := 1
272endif
273
274ifeq ($(MAKECMDGOALS),)
275 KBUILD_MODULES := 1
276endif
277
278export KBUILD_MODULES KBUILD_BUILTIN
279export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
280
281# Beautify output
282# ---------------------------------------------------------------------------
283#
284# Normally, we echo the whole command before executing it. By making
285# that echo $($(quiet)$(cmd)), we now have the possibility to set
286# $(quiet) to choose other forms of output instead, e.g.
287#
288# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
289# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
290#
291# If $(quiet) is empty, the whole command will be printed.
292# If it is set to "quiet_", only the short version will be printed.
293# If it is set to "silent_", nothing will be printed at all, since
294# the variable $(silent_cmd_cc_o_c) doesn't exist.
295#
296# A simple variant is to prefix commands with $(Q) - that's useful
297# for commands that shall be hidden in non-verbose mode.
298#
299# $(Q)ln $@ :<
300#
301# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
302# If KBUILD_VERBOSE equals 1 then the above command is displayed.
303
304ifeq ($(KBUILD_VERBOSE),1)
305 quiet =
306 Q =
307else
308 quiet=quiet_
309 Q = @
310endif
311
312# If the user is running make -s (silent mode), suppress echoing of
313# commands
314
315ifneq ($(findstring s,$(MAKEFLAGS)),)
316 quiet=silent_
317endif
318
319export quiet Q KBUILD_VERBOSE
320
321
322# Look for make include files relative to root of kernel src
323MAKEFLAGS += --include-dir=$(srctree)
324
325# We need some generic definitions (do not try to remake the file).
326$(srctree)/scripts/Kbuild.include: ;
327include $(srctree)/scripts/Kbuild.include
328
329# Make variables (CC, etc...)
330
331AS = $(CROSS_COMPILE)as
332LD = $(CROSS_COMPILE)ld
333CC = $(CROSS_COMPILE)gcc
334CPP = $(CC) -E
335AR = $(CROSS_COMPILE)ar
336NM = $(CROSS_COMPILE)nm
337STRIP = $(CROSS_COMPILE)strip
338OBJCOPY = $(CROSS_COMPILE)objcopy
339OBJDUMP = $(CROSS_COMPILE)objdump
340AWK = awk
341GENKSYMS = scripts/genksyms/genksyms
342INSTALLKERNEL := installkernel
343DEPMOD = /sbin/depmod
344KALLSYMS = scripts/kallsyms
345PERL = perl
346CHECK = sparse
347
348CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
349 -Wbitwise -Wno-return-void $(CF)
350CFLAGS_MODULE =
351AFLAGS_MODULE =
352LDFLAGS_MODULE =
353CFLAGS_KERNEL =
354AFLAGS_KERNEL =
355CFLAGS_GCOV = -fprofile-arcs -ftest-coverage
356
357
358# Use LINUXINCLUDE when you must reference the include/ directory.
359# Needed to be compatible with the O= option
360LINUXINCLUDE := -I$(srctree)/arch/$(hdr-arch)/include \
361 -Iarch/$(hdr-arch)/include/generated -Iinclude \
362 $(if $(KBUILD_SRC), -I$(srctree)/include) \
363 -include $(srctree)/include/linux/kconfig.h
364
365KBUILD_CPPFLAGS := -D__KERNEL__
366
367KBUILD_CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
368 -fno-strict-aliasing -fno-common \
369 -Werror-implicit-function-declaration \
370 -Wno-format-security \
371 -fno-delete-null-pointer-checks
372KBUILD_AFLAGS_KERNEL :=
373KBUILD_CFLAGS_KERNEL :=
374KBUILD_AFLAGS := -D__ASSEMBLY__
375KBUILD_AFLAGS_MODULE := -DMODULE
376KBUILD_CFLAGS_MODULE := -DMODULE
377KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
378
379# Read KERNELRELEASE from include/config/kernel.release (if it exists)
380KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
381KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
382
383export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
384export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
385export CPP AR NM STRIP OBJCOPY OBJDUMP
386export MAKE AWK GENKSYMS INSTALLKERNEL PERL UTS_MACHINE
387export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
388
389export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
390export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV
391export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
392export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
393export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
394export KBUILD_ARFLAGS
395
396# When compiling out-of-tree modules, put MODVERDIR in the module
397# tree rather than in the kernel tree. The kernel tree might
398# even be read-only.
399export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
400
401# Files to ignore in find ... statements
402
403RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg -o -name .git \) -prune -o
404export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg --exclude .git
405
406# ===========================================================================
407# Rules shared between *config targets and build targets
408
409# Basic helpers built in scripts
410PHONY += scripts_basic
411scripts_basic:
412 $(Q)$(MAKE) $(build)=scripts/basic
413 $(Q)rm -f .tmp_quiet_recordmcount
414
415# To avoid any implicit rule to kick in, define an empty command.
416scripts/basic/%: scripts_basic ;
417
418PHONY += outputmakefile
419# outputmakefile generates a Makefile in the output directory, if using a
420# separate output directory. This allows convenient use of make in the
421# output directory.
422outputmakefile:
423ifneq ($(KBUILD_SRC),)
424 $(Q)ln -fsn $(srctree) source
425 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
426 $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
427endif
428
429# Support for using generic headers in asm-generic
430PHONY += asm-generic
431asm-generic:
432 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
433 obj=arch/$(SRCARCH)/include/generated/asm
434
435# To make sure we do not include .config for any of the *config targets
436# catch them early, and hand them over to scripts/kconfig/Makefile
437# It is allowed to specify more targets when calling make, including
438# mixing *config targets and build targets.
439# For example 'make oldconfig all'.
440# Detect when mixed targets is specified, and make a second invocation
441# of make so .config is not included in this case either (for *config).
442
443no-dot-config-targets := clean mrproper distclean \
444 cscope gtags TAGS tags help %docs check% coccicheck \
445 include/linux/version.h headers_% \
446 kernelversion %src-pkg
447
448config-targets := 0
449mixed-targets := 0
450dot-config := 1
451
452ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
453 ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
454 dot-config := 0
455 endif
456endif
457
458ifeq ($(KBUILD_EXTMOD),)
459 ifneq ($(filter config %config,$(MAKECMDGOALS)),)
460 config-targets := 1
461 ifneq ($(filter-out config %config,$(MAKECMDGOALS)),)
462 mixed-targets := 1
463 endif
464 endif
465endif
466
467ifeq ($(mixed-targets),1)
468# ===========================================================================
469# We're called with mixed targets (*config and build targets).
470# Handle them one by one.
471
472%:: FORCE
473 $(Q)$(MAKE) -C $(srctree) KBUILD_SRC= $@
474
475else
476ifeq ($(config-targets),1)
477# ===========================================================================
478# *config targets only - make sure prerequisites are updated, and descend
479# in scripts/kconfig to make the *config target
480
481# Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
482# KBUILD_DEFCONFIG may point out an alternative default configuration
483# used for 'make defconfig'
484include $(srctree)/arch/$(SRCARCH)/Makefile
485export KBUILD_DEFCONFIG KBUILD_KCONFIG
486
487config: scripts_basic outputmakefile FORCE
488 $(Q)mkdir -p include/linux include/config
489 $(Q)$(MAKE) $(build)=scripts/kconfig $@
490
491%config: scripts_basic outputmakefile FORCE
492 $(Q)mkdir -p include/linux include/config
493 $(Q)$(MAKE) $(build)=scripts/kconfig $@
494
495else
496# ===========================================================================
497# Build targets only - this includes vmlinux, arch specific targets, clean
498# targets and others. In general all targets except *config targets.
499
500ifeq ($(KBUILD_EXTMOD),)
501# Additional helpers built in scripts
502# Carefully list dependencies so we do not try to build scripts twice
503# in parallel
504PHONY += scripts
505scripts: scripts_basic include/config/auto.conf include/config/tristate.conf
506 $(Q)$(MAKE) $(build)=$(@)
507
508# Objects we will link into vmlinux / subdirs we need to visit
509init-y := init
510drivers-y := drivers sound firmware
511net-y := net
512libs-y := lib
513core-y := usr
514endif # KBUILD_EXTMOD
515
516ifeq ($(dot-config),1)
517# Read in config
518-include include/config/auto.conf
519
520ifeq ($(KBUILD_EXTMOD),)
521# Read in dependencies to all Kconfig* files, make sure to run
522# oldconfig if changes are detected.
523-include include/config/auto.conf.cmd
524
525# To avoid any implicit rule to kick in, define an empty command
526$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
527
528# If .config is newer than include/config/auto.conf, someone tinkered
529# with it and forgot to run make oldconfig.
530# if auto.conf.cmd is missing then we are probably in a cleaned tree so
531# we execute the config step to be sure to catch updated Kconfig files
532include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
533 $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
534else
535# external modules needs include/generated/autoconf.h and include/config/auto.conf
536# but do not care if they are up-to-date. Use auto.conf to trigger the test
537PHONY += include/config/auto.conf
538
539include/config/auto.conf:
540 $(Q)test -e include/generated/autoconf.h -a -e $@ || ( \
541 echo; \
542 echo " ERROR: Kernel configuration is invalid."; \
543 echo " include/generated/autoconf.h or $@ are missing.";\
544 echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \
545 echo; \
546 /bin/false)
547
548endif # KBUILD_EXTMOD
549
550else
551# Dummy target needed, because used as prerequisite
552include/config/auto.conf: ;
553endif # $(dot-config)
554
555# The all: target is the default when no target is given on the
556# command line.
557# This allow a user to issue only 'make' to build a kernel including modules
558# Defaults to vmlinux, but the arch makefile usually adds further targets
559all: vmlinux
560
561ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
562KBUILD_CFLAGS += -Os
563else
564KBUILD_CFLAGS += -O2
565endif
566
567include $(srctree)/arch/$(SRCARCH)/Makefile
568
569ifneq ($(CONFIG_FRAME_WARN),0)
570KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
571endif
572
573# Force gcc to behave correct even for buggy distributions
574ifndef CONFIG_CC_STACKPROTECTOR
575KBUILD_CFLAGS += $(call cc-option, -fno-stack-protector)
576endif
577
578# This warning generated too much noise in a regular build.
579# Use make W=1 to enable this warning (see scripts/Makefile.build)
580KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
581
582ifdef CONFIG_FRAME_POINTER
583KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls
584else
585# Some targets (ARM with Thumb2, for example), can't be built with frame
586# pointers. For those, we don't have FUNCTION_TRACER automatically
587# select FRAME_POINTER. However, FUNCTION_TRACER adds -pg, and this is
588# incompatible with -fomit-frame-pointer with current GCC, so we don't use
589# -fomit-frame-pointer with FUNCTION_TRACER.
590ifndef CONFIG_FUNCTION_TRACER
591KBUILD_CFLAGS += -fomit-frame-pointer
592endif
593endif
594
595ifdef CONFIG_DEBUG_INFO
596KBUILD_CFLAGS += -g
597KBUILD_AFLAGS += -gdwarf-2
598endif
599
600ifdef CONFIG_DEBUG_INFO_REDUCED
601KBUILD_CFLAGS += $(call cc-option, -femit-struct-debug-baseonly)
602endif
603
604ifdef CONFIG_FUNCTION_TRACER
605KBUILD_CFLAGS += -pg
606ifdef CONFIG_DYNAMIC_FTRACE
607 ifdef CONFIG_HAVE_C_RECORDMCOUNT
608 BUILD_C_RECORDMCOUNT := y
609 export BUILD_C_RECORDMCOUNT
610 endif
611endif
612endif
613
614# We trigger additional mismatches with less inlining
615ifdef CONFIG_DEBUG_SECTION_MISMATCH
616KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once)
617endif
618
619# arch Makefile may override CC so keep this after arch Makefile is included
620NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
621CHECKFLAGS += $(NOSTDINC_FLAGS)
622
623# warn about C99 declaration after statement
624KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
625
626# disable pointer signed / unsigned warnings in gcc 4.0
627KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign)
628
629# disable invalid "can't wrap" optimizations for signed / pointers
630KBUILD_CFLAGS += $(call cc-option,-fno-strict-overflow)
631
632# conserve stack if available
633KBUILD_CFLAGS += $(call cc-option,-fconserve-stack)
634
635# use the deterministic mode of AR if available
636KBUILD_ARFLAGS := $(call ar-option,D)
637
638# check for 'asm goto'
639ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC)), y)
640 KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO
641endif
642
643# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
644# But warn user when we do so
645warn-assign = \
646$(warning "WARNING: Appending $$K$(1) ($(K$(1))) from $(origin K$(1)) to kernel $$$(1)")
647
648ifneq ($(KCPPFLAGS),)
649 $(call warn-assign,CPPFLAGS)
650 KBUILD_CPPFLAGS += $(KCPPFLAGS)
651endif
652ifneq ($(KAFLAGS),)
653 $(call warn-assign,AFLAGS)
654 KBUILD_AFLAGS += $(KAFLAGS)
655endif
656ifneq ($(KCFLAGS),)
657 $(call warn-assign,CFLAGS)
658 KBUILD_CFLAGS += $(KCFLAGS)
659endif
660
661# Use --build-id when available.
662LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\
663 $(call cc-ldoption, -Wl$(comma)--build-id,))
664KBUILD_LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID)
665LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID)
666
667ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
668LDFLAGS_vmlinux += $(call ld-option, -X,)
669endif
670
671# Default kernel image to build when no specific target is given.
672# KBUILD_IMAGE may be overruled on the command line or
673# set in the environment
674# Also any assignments in arch/$(ARCH)/Makefile take precedence over
675# this default value
676export KBUILD_IMAGE ?= vmlinux
677
678#
679# INSTALL_PATH specifies where to place the updated kernel and system map
680# images. Default is /boot, but you can set it to other values
681export INSTALL_PATH ?= /boot
682
683#
684# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
685# relocations required by build roots. This is not defined in the
686# makefile but the argument can be passed to make if needed.
687#
688
689MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
690export MODLIB
691
692#
693# INSTALL_MOD_STRIP, if defined, will cause modules to be
694# stripped after they are installed. If INSTALL_MOD_STRIP is '1', then
695# the default option --strip-debug will be used. Otherwise,
696# INSTALL_MOD_STRIP value will be used as the options to the strip command.
697
698ifdef INSTALL_MOD_STRIP
699ifeq ($(INSTALL_MOD_STRIP),1)
700mod_strip_cmd = $(STRIP) --strip-debug
701else
702mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP)
703endif # INSTALL_MOD_STRIP=1
704else
705mod_strip_cmd = true
706endif # INSTALL_MOD_STRIP
707export mod_strip_cmd
708
709
710ifeq ($(KBUILD_EXTMOD),)
711core-y += kernel mm fs ipc security crypto block
712
713vmlinux-dirs := $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \
714 $(core-y) $(core-m) $(drivers-y) $(drivers-m) \
715 $(net-y) $(net-m) $(libs-y) $(libs-m)))
716
717vmlinux-alldirs := $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \
718 $(init-n) $(init-) \
719 $(core-n) $(core-) $(drivers-n) $(drivers-) \
720 $(net-n) $(net-) $(libs-n) $(libs-))))
721
722init-y := $(patsubst %/, %/built-in.o, $(init-y))
723core-y := $(patsubst %/, %/built-in.o, $(core-y))
724drivers-y := $(patsubst %/, %/built-in.o, $(drivers-y))
725net-y := $(patsubst %/, %/built-in.o, $(net-y))
726libs-y1 := $(patsubst %/, %/lib.a, $(libs-y))
727libs-y2 := $(patsubst %/, %/built-in.o, $(libs-y))
728libs-y := $(libs-y1) $(libs-y2)
729
730# Build vmlinux
731# ---------------------------------------------------------------------------
732# vmlinux is built from the objects selected by $(vmlinux-init) and
733# $(vmlinux-main). Most are built-in.o files from top-level directories
734# in the kernel tree, others are specified in arch/$(ARCH)/Makefile.
735# Ordering when linking is important, and $(vmlinux-init) must be first.
736#
737# vmlinux
738# ^
739# |
740# +-< $(vmlinux-init)
741# | +--< init/version.o + more
742# |
743# +--< $(vmlinux-main)
744# | +--< driver/built-in.o mm/built-in.o + more
745# |
746# +-< kallsyms.o (see description in CONFIG_KALLSYMS section)
747#
748# vmlinux version (uname -v) cannot be updated during normal
749# descending-into-subdirs phase since we do not yet know if we need to
750# update vmlinux.
751# Therefore this step is delayed until just before final link of vmlinux -
752# except in the kallsyms case where it is done just before adding the
753# symbols to the kernel.
754#
755# System.map is generated to document addresses of all kernel symbols
756
757vmlinux-init := $(head-y) $(init-y)
758vmlinux-main := $(core-y) $(libs-y) $(drivers-y) $(net-y)
759vmlinux-all := $(vmlinux-init) $(vmlinux-main)
760vmlinux-lds := arch/$(SRCARCH)/kernel/vmlinux.lds
761export KBUILD_VMLINUX_OBJS := $(vmlinux-all)
762
763# Rule to link vmlinux - also used during CONFIG_KALLSYMS
764# May be overridden by arch/$(ARCH)/Makefile
765quiet_cmd_vmlinux__ ?= LD $@
766 cmd_vmlinux__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) -o $@ \
767 -T $(vmlinux-lds) $(vmlinux-init) \
768 --start-group $(vmlinux-main) --end-group \
769 $(filter-out $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) vmlinux.o FORCE ,$^)
770
771# Generate new vmlinux version
772quiet_cmd_vmlinux_version = GEN .version
773 cmd_vmlinux_version = set -e; \
774 if [ ! -r .version ]; then \
775 rm -f .version; \
776 echo 1 >.version; \
777 else \
778 mv .version .old_version; \
779 expr 0$$(cat .old_version) + 1 >.version; \
780 fi; \
781 $(MAKE) $(build)=init
782
783# Generate System.map
784quiet_cmd_sysmap = SYSMAP
785 cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap
786
787# Link of vmlinux
788# If CONFIG_KALLSYMS is set .version is already updated
789# Generate System.map and verify that the content is consistent
790# Use + in front of the vmlinux_version rule to silent warning with make -j2
791# First command is ':' to allow us to use + in front of the rule
792define rule_vmlinux__
793 :
794 $(if $(CONFIG_KALLSYMS),,+$(call cmd,vmlinux_version))
795
796 $(call cmd,vmlinux__)
797 $(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
798
799 $(Q)$(if $($(quiet)cmd_sysmap), \
800 echo ' $($(quiet)cmd_sysmap) System.map' &&) \
801 $(cmd_sysmap) $@ System.map; \
802 if [ $$? -ne 0 ]; then \
803 rm -f $@; \
804 /bin/false; \
805 fi;
806 $(verify_kallsyms)
807endef
808
809
810ifdef CONFIG_KALLSYMS
811# Generate section listing all symbols and add it into vmlinux $(kallsyms.o)
812# It's a three stage process:
813# o .tmp_vmlinux1 has all symbols and sections, but __kallsyms is
814# empty
815# Running kallsyms on that gives us .tmp_kallsyms1.o with
816# the right size - vmlinux version (uname -v) is updated during this step
817# o .tmp_vmlinux2 now has a __kallsyms section of the right size,
818# but due to the added section, some addresses have shifted.
819# From here, we generate a correct .tmp_kallsyms2.o
820# o The correct .tmp_kallsyms2.o is linked into the final vmlinux.
821# o Verify that the System.map from vmlinux matches the map from
822# .tmp_vmlinux2, just in case we did not generate kallsyms correctly.
823# o If 'make KALLSYMS_EXTRA_PASS=1" was used, do an extra pass using
824# .tmp_vmlinux3 and .tmp_kallsyms3.o. This is only meant as a
825# temporary bypass to allow the kernel to be built while the
826# maintainers work out what went wrong with kallsyms.
827
828last_kallsyms := 2
829
830ifdef KALLSYMS_EXTRA_PASS
831ifneq ($(KALLSYMS_EXTRA_PASS),0)
832last_kallsyms := 3
833endif
834endif
835
836kallsyms.o := .tmp_kallsyms$(last_kallsyms).o
837
838define verify_kallsyms
839 $(Q)$(if $($(quiet)cmd_sysmap), \
840 echo ' $($(quiet)cmd_sysmap) .tmp_System.map' &&) \
841 $(cmd_sysmap) .tmp_vmlinux$(last_kallsyms) .tmp_System.map
842 $(Q)cmp -s System.map .tmp_System.map || \
843 (echo Inconsistent kallsyms data; \
844 echo This is a bug - please report about it; \
845 echo Try "make KALLSYMS_EXTRA_PASS=1" as a workaround; \
846 rm .tmp_kallsyms* ; /bin/false )
847endef
848
849# Update vmlinux version before link
850# Use + in front of this rule to silent warning about make -j1
851# First command is ':' to allow us to use + in front of this rule
852cmd_ksym_ld = $(cmd_vmlinux__)
853define rule_ksym_ld
854 :
855 +$(call cmd,vmlinux_version)
856 $(call cmd,vmlinux__)
857 $(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
858endef
859
860# Generate .S file with all kernel symbols
861quiet_cmd_kallsyms = KSYM $@
862 cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \
863 $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@
864
865.tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE
866 $(call if_changed_dep,as_o_S)
867
868.tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS)
869 $(call cmd,kallsyms)
870
871# .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version
872.tmp_vmlinux1: $(vmlinux-lds) $(vmlinux-all) FORCE
873 $(call if_changed_rule,ksym_ld)
874
875.tmp_vmlinux2: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms1.o FORCE
876 $(call if_changed,vmlinux__)
877
878.tmp_vmlinux3: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms2.o FORCE
879 $(call if_changed,vmlinux__)
880
881# Needs to visit scripts before $(KALLSYMS) can be used.
882$(KALLSYMS): scripts ;
883
884# Generate some data for debugging strange kallsyms problems
885debug_kallsyms: .tmp_map$(last_kallsyms)
886
887.tmp_map%: .tmp_vmlinux% FORCE
888 ($(OBJDUMP) -h $< | $(AWK) '/^ +[0-9]/{print $$4 " 0 " $$2}'; $(NM) $<) | sort > $@
889
890.tmp_map3: .tmp_map2
891
892.tmp_map2: .tmp_map1
893
894endif # ifdef CONFIG_KALLSYMS
895
896# Do modpost on a prelinked vmlinux. The finally linked vmlinux has
897# relevant sections renamed as per the linker script.
898quiet_cmd_vmlinux-modpost = LD $@
899 cmd_vmlinux-modpost = $(LD) $(LDFLAGS) -r -o $@ \
900 $(vmlinux-init) --start-group $(vmlinux-main) --end-group \
901 $(filter-out $(vmlinux-init) $(vmlinux-main) FORCE ,$^)
902define rule_vmlinux-modpost
903 :
904 +$(call cmd,vmlinux-modpost)
905 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost $@
906 $(Q)echo 'cmd_$@ := $(cmd_vmlinux-modpost)' > $(dot-target).cmd
907endef
908
909# vmlinux image - including updated kernel symbols
910vmlinux: $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) __KEEPMAKEFILEO__I.o $(kallsyms.o) FORCE
911ifdef CONFIG_HEADERS_CHECK
912 $(Q)$(MAKE) -f $(srctree)/Makefile headers_check
913endif
914ifdef CONFIG_SAMPLES
915 $(Q)$(MAKE) $(build)=samples
916endif
917ifdef CONFIG_BUILD_DOCSRC
918 $(Q)$(MAKE) $(build)=Documentation
919endif
920 $(call vmlinux-modpost)
921 $(call if_changed_rule,vmlinux__)
922 $(Q)rm -f .old_version
923
924# build vmlinux.o first to catch section mismatch errors early
925ifdef CONFIG_KALLSYMS
926.tmp_vmlinux1: __KEEPMAKEFILEO__BA.o
927endif
928
929modpost-init := $(filter-out init/built-in.o, $(vmlinux-init))
930vmlinux.o: $(modpost-init) $(vmlinux-main) FORCE
931 $(call if_changed_rule,vmlinux-modpost)
932
933# The actual objects are generated when descending,
934# make sure no implicit rule kicks in
935$(sort $(vmlinux-init) $(vmlinux-main)) $(vmlinux-lds): $(vmlinux-dirs) ;
936
937# Handle descending into subdirectories listed in $(vmlinux-dirs)
938# Preset locale variables to speed up the build process. Limit locale
939# tweaks to this spot to avoid wrong language settings when running
940# make menuconfig etc.
941# Error messages still appears in the original language
942
943PHONY += $(vmlinux-dirs)
944$(vmlinux-dirs): prepare scripts
945 $(Q)$(MAKE) $(build)=$@
946
947# Store (new) KERNELRELASE string in include/config/kernel.release
948include/config/kernel.release: include/config/auto.conf FORCE
949 $(Q)rm -f $@
950 $(Q)echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" > $@
951
952
953# Things we need to do before we recursively start building the kernel
954# or the modules are listed in "prepare".
955# A multi level approach is used. prepareN is processed before prepareN-1.
956# archprepare is used in arch Makefiles and when processed asm symlink,
957# version.h and scripts_basic is processed / created.
958
959# Listed in dependency order
960PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
961
962# prepare3 is used to check if we are building in a separate output directory,
963# and if so do:
964# 1) Check that make has not been executed in the kernel src $(srctree)
965prepare3: include/config/kernel.release
966ifneq ($(KBUILD_SRC),)
967 @$(kecho) ' Using $(srctree) as source for kernel'
968 $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
969 echo " $(srctree) is not clean, please run 'make mrproper'";\
970 echo " in the '$(srctree)' directory.";\
971 /bin/false; \
972 fi;
973endif
974
975# prepare2 creates a makefile if using a separate output directory
976prepare2: prepare3 outputmakefile asm-generic
977
978prepare1: prepare2 include/linux/version.h include/generated/utsrelease.h \
979 include/config/auto.conf
980 $(cmd_crmodverdir)
981
982archprepare: prepare1 scripts_basic
983
984prepare0: archprepare FORCE
985 $(Q)$(MAKE) $(build)=.
986 $(Q)$(MAKE) $(build)=. missing-syscalls
987
988# All the preparing..
989prepare: prepare0
990
991# Generate some files
992# ---------------------------------------------------------------------------
993
994# KERNELRELEASE can change from a few different places, meaning version.h
995# needs to be updated, so this check is forced on all builds
996
997uts_len := 64
998define filechk_utsrelease.h
999 if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
1000 echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \
1001 exit 1; \
1002 fi; \
1003 (echo \#define UTS_RELEASE \"$(KERNELRELEASE)\";)
1004endef
1005
1006define filechk_version.h
1007 (echo \#define LINUX_VERSION_CODE $(shell \
1008 expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \
1009 echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
1010endef
1011
1012include/linux/version.h: $(srctree)/Makefile FORCE
1013 $(call filechk,version.h)
1014
1015include/generated/utsrelease.h: include/config/kernel.release FORCE
1016 $(call filechk,utsrelease.h)
1017
1018PHONY += headerdep
1019headerdep:
1020 $(Q)find $(srctree)/include/ -name '*.h' | xargs --max-args 1 \
1021 $(srctree)/scripts/headerdep.pl -I$(srctree)/include
1022
1023# ---------------------------------------------------------------------------
1024
1025PHONY += depend dep
1026depend dep:
1027 @echo '*** Warning: make $@ is unnecessary now.'
1028
1029# ---------------------------------------------------------------------------
1030# Firmware install
1031INSTALL_FW_PATH=$(INSTALL_MOD_PATH)/lib/firmware
1032export INSTALL_FW_PATH
1033
1034PHONY += firmware_install
1035firmware_install: FORCE
1036 @mkdir -p $(objtree)/firmware
1037 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_install
1038
1039# ---------------------------------------------------------------------------
1040# Kernel headers
1041
1042#Default location for installed headers
1043export INSTALL_HDR_PATH = $(objtree)/usr
1044
1045hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
1046
1047# If we do an all arch process set dst to asm-$(hdr-arch)
1048hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm)
1049
1050PHONY += __headers
1051__headers: include/linux/version.h scripts_basic asm-generic FORCE
1052 $(Q)$(MAKE) $(build)=scripts build_unifdef
1053
1054PHONY += headers_install_all
1055headers_install_all:
1056 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh install
1057
1058PHONY += headers_install
1059headers_install: __headers
1060 $(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/asm/Kbuild),, \
1061 $(error Headers not exportable for the $(SRCARCH) architecture))
1062 $(Q)$(MAKE) $(hdr-inst)=include
1063 $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst)
1064
1065PHONY += headers_check_all
1066headers_check_all: headers_install_all
1067 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh check
1068
1069PHONY += headers_check
1070headers_check: headers_install
1071 $(Q)$(MAKE) $(hdr-inst)=include HDRCHECK=1
1072 $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst) HDRCHECK=1
1073
1074# ---------------------------------------------------------------------------
1075# Modules
1076
1077ifdef CONFIG_MODULES
1078
1079# By default, build modules as well
1080
1081all: modules
1082
1083# Build modules
1084#
1085# A module can be listed more than once in obj-m resulting in
1086# duplicate lines in modules.order files. Those are removed
1087# using awk while concatenating to the final file.
1088
1089PHONY += modules
1090modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin
1091 $(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
1092 @$(kecho) ' Building modules, stage 2.';
1093 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1094 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild
1095
1096modules.builtin: $(vmlinux-dirs:%=%/modules.builtin)
1097 $(Q)$(AWK) '!x[$$0]++' $^ > $(objtree)/modules.builtin
1098
1099%/modules.builtin: include/config/auto.conf
1100 $(Q)$(MAKE) $(modbuiltin)=$*
1101
1102
1103# Target to prepare building external modules
1104PHONY += modules_prepare
1105modules_prepare: prepare scripts
1106
1107# Target to install modules
1108PHONY += modules_install
1109modules_install: _modinst_ _modinst_post
1110
1111PHONY += _modinst_
1112_modinst_:
1113 @rm -rf $(MODLIB)/kernel
1114 @rm -f $(MODLIB)/source
1115 @mkdir -p $(MODLIB)/kernel
1116 @ln -s $(srctree) $(MODLIB)/source
1117 @if [ ! $(objtree) -ef $(MODLIB)/build ]; then \
1118 rm -f $(MODLIB)/build ; \
1119 ln -s $(objtree) $(MODLIB)/build ; \
1120 fi
1121 @cp -f $(objtree)/modules.order $(MODLIB)/
1122 @cp -f $(objtree)/modules.builtin $(MODLIB)/
1123 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
1124
1125# This depmod is only for convenience to give the initial
1126# boot a modules.dep even before / is mounted read-write. However the
1127# boot script depmod is the master version.
1128PHONY += _modinst_post
1129_modinst_post: _modinst_
1130 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modinst
1131 $(call cmd,depmod)
1132
1133else # CONFIG_MODULES
1134
1135# Modules not configured
1136# ---------------------------------------------------------------------------
1137
1138modules modules_install: FORCE
1139 @echo
1140 @echo "The present kernel configuration has modules disabled."
1141 @echo "Type 'make config' and enable loadable module support."
1142 @echo "Then build a kernel with module support enabled."
1143 @echo
1144 @exit 1
1145
1146endif # CONFIG_MODULES
1147
1148###
1149# Cleaning is done on three levels.
1150# make clean Delete most generated files
1151# Leave enough to build external modules
1152# make mrproper Delete the current configuration, and all generated files
1153# make distclean Remove editor backup files, patch leftover files and the like
1154
1155# Directories & files removed with 'make clean'
1156CLEAN_DIRS += $(MODVERDIR)
1157CLEAN_FILES += vmlinux System.map \
1158 .tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map
1159
1160# Directories & files removed with 'make mrproper'
1161MRPROPER_DIRS += include/config usr/include include/generated \
1162 arch/*/include/generated
1163MRPROPER_FILES += .config .config.old .version .old_version \
1164 include/linux/version.h \
1165 Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
1166
1167# clean - Delete most, but leave enough to build external modules
1168#
1169clean: rm-dirs := $(CLEAN_DIRS)
1170clean: rm-files := $(CLEAN_FILES)
1171clean-dirs := $(addprefix _clean_, . $(vmlinux-alldirs) Documentation)
1172
1173PHONY += $(clean-dirs) clean archclean
1174$(clean-dirs):
1175 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1176
1177clean: archclean
1178
1179# mrproper - Delete all generated files, including .config
1180#
1181mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
1182mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
1183mrproper-dirs := $(addprefix _mrproper_,Documentation/DocBook scripts)
1184
1185PHONY += $(mrproper-dirs) mrproper archmrproper
1186$(mrproper-dirs):
1187 $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
1188
1189mrproper: clean archmrproper $(mrproper-dirs)
1190 $(call cmd,rmdirs)
1191 $(call cmd,rmfiles)
1192
1193# distclean
1194#
1195PHONY += distclean
1196
1197distclean: mrproper
1198 @find $(srctree) $(RCS_FIND_IGNORE) \
1199 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
1200 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
1201 -o -name '.*.rej' -o -size 0 \
1202 -o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
1203 -type f -print | xargs rm -f
1204
1205
1206# Packaging of the kernel to various formats
1207# ---------------------------------------------------------------------------
1208# rpm target kept for backward compatibility
1209package-dir := $(srctree)/scripts/package
1210
1211%src-pkg: FORCE
1212 $(Q)$(MAKE) $(build)=$(package-dir) $@
1213%pkg: include/config/kernel.release FORCE
1214 $(Q)$(MAKE) $(build)=$(package-dir) $@
1215rpm: include/config/kernel.release FORCE
1216 $(Q)$(MAKE) $(build)=$(package-dir) $@
1217
1218
1219# Brief documentation of the typical targets used
1220# ---------------------------------------------------------------------------
1221
1222boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig)
1223boards := $(notdir $(boards))
1224board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig))
1225board-dirs := $(sort $(notdir $(board-dirs:/=)))
1226
1227help:
1228 @echo 'Cleaning targets:'
1229 @echo ' clean - Remove most generated files but keep the config and'
1230 @echo ' enough build support to build external modules'
1231 @echo ' mrproper - Remove all generated files + config + various backup files'
1232 @echo ' distclean - mrproper + remove editor backup and patch files'
1233 @echo ''
1234 @echo 'Configuration targets:'
1235 @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
1236 @echo ''
1237 @echo 'Other generic targets:'
1238 @echo ' all - Build all targets marked with [*]'
1239 @echo '* vmlinux - Build the bare kernel'
1240 @echo '* modules - Build all modules'
1241 @echo ' modules_install - Install all modules to INSTALL_MOD_PATH (default: /)'
1242 @echo ' firmware_install- Install all firmware to INSTALL_FW_PATH'
1243 @echo ' (default: $$(INSTALL_MOD_PATH)/lib/firmware)'
1244 @echo ' dir/ - Build all files in dir and below'
1245 @echo ' dir/file.[oisS] - Build specified target only'
1246 @echo ' dir/file.lst - Build specified mixed source/assembly target only'
1247 @echo ' (requires a recent binutils and recent build (System.map))'
1248 @echo ' dir/file.ko - Build module including final link'
1249 @echo ' modules_prepare - Set up for building external modules'
1250 @echo ' tags/TAGS - Generate tags file for editors'
1251 @echo ' cscope - Generate cscope index'
1252 @echo ' gtags - Generate GNU GLOBAL index'
1253 @echo ' kernelrelease - Output the release version string'
1254 @echo ' kernelversion - Output the version stored in Makefile'
1255 @echo ' headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
1256 echo ' (default: $(INSTALL_HDR_PATH))'; \
1257 echo ''
1258 @echo 'Static analysers'
1259 @echo ' checkstack - Generate a list of stack hogs'
1260 @echo ' namespacecheck - Name space analysis on compiled kernel'
1261 @echo ' versioncheck - Sanity check on version.h usage'
1262 @echo ' includecheck - Check for duplicate included header files'
1263 @echo ' export_report - List the usages of all exported symbols'
1264 @echo ' headers_check - Sanity check on exported headers'
1265 @echo ' headerdep - Detect inclusion cycles in headers'
1266 @$(MAKE) -f $(srctree)/scripts/Makefile.help checker-help
1267 @echo ''
1268 @echo 'Kernel packaging:'
1269 @$(MAKE) $(build)=$(package-dir) help
1270 @echo ''
1271 @echo 'Documentation targets:'
1272 @$(MAKE) -f $(srctree)/Documentation/DocBook/Makefile dochelp
1273 @echo ''
1274 @echo 'Architecture specific targets ($(SRCARCH)):'
1275 @$(if $(archhelp),$(archhelp),\
1276 echo ' No architecture specific help defined for $(SRCARCH)')
1277 @echo ''
1278 @$(if $(boards), \
1279 $(foreach b, $(boards), \
1280 printf " %-24s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \
1281 echo '')
1282 @$(if $(board-dirs), \
1283 $(foreach b, $(board-dirs), \
1284 printf " %-16s - Show %s-specific targets\\n" help-$(b) $(b);) \
1285 printf " %-16s - Show all of the above\\n" help-boards; \
1286 echo '')
1287
1288 @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
1289 @echo ' make V=2 [targets] 2 => give reason for rebuild of target'
1290 @echo ' make O=dir [targets] Locate all output files in "dir", including .config'
1291 @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
1292 @echo ' make C=2 [targets] Force check of all c source with $$CHECK'
1293 @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
1294 @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
1295 @echo ' 1: warnings which may be relevant and do not occur too often'
1296 @echo ' 2: warnings which occur quite often but may still be relevant'
1297 @echo ' 3: more obscure warnings, can most likely be ignored'
1298 @echo ' Multiple levels can be combined with W=12 or W=123'
1299 @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
1300 @echo ''
1301 @echo 'Execute "make" or "make all" to build all targets marked with [*] '
1302 @echo 'For further info see the ./README file'
1303
1304
1305help-board-dirs := $(addprefix help-,$(board-dirs))
1306
1307help-boards: $(help-board-dirs)
1308
1309boards-per-dir = $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig))
1310
1311$(help-board-dirs): help-%:
1312 @echo 'Architecture specific targets ($(SRCARCH) $*):'
1313 @$(if $(boards-per-dir), \
1314 $(foreach b, $(boards-per-dir), \
1315 printf " %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \
1316 echo '')
1317
1318
1319# Documentation targets
1320# ---------------------------------------------------------------------------
1321%docs: scripts_basic FORCE
1322 $(Q)$(MAKE) $(build)=scripts build_docproc
1323 $(Q)$(MAKE) $(build)=Documentation/DocBook $@
1324
1325else # KBUILD_EXTMOD
1326
1327###
1328# External module support.
1329# When building external modules the kernel used as basis is considered
1330# read-only, and no consistency checks are made and the make
1331# system is not used on the basis kernel. If updates are required
1332# in the basis kernel ordinary make commands (without M=...) must
1333# be used.
1334#
1335# The following are the only valid targets when building external
1336# modules.
1337# make M=dir clean Delete all automatically generated files
1338# make M=dir modules Make all modules in specified dir
1339# make M=dir Same as 'make M=dir modules'
1340# make M=dir modules_install
1341# Install the modules built in the module directory
1342# Assumes install directory is already created
1343
1344# We are always building modules
1345KBUILD_MODULES := 1
1346PHONY += crmodverdir
1347crmodverdir:
1348 $(cmd_crmodverdir)
1349
1350PHONY += $(objtree)/Module.symvers
1351$(objtree)/Module.symvers:
1352 @test -e $(objtree)/Module.symvers || ( \
1353 echo; \
1354 echo " WARNING: Symbol version dump $(objtree)/Module.symvers"; \
1355 echo " is missing; modules will have no dependencies and modversions."; \
1356 echo )
1357
1358module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
1359PHONY += $(module-dirs) modules
1360$(module-dirs): crmodverdir $(objtree)/Module.symvers
1361 $(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)
1362
1363modules: $(module-dirs)
1364 @$(kecho) ' Building modules, stage 2.';
1365 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1366
1367PHONY += modules_install
1368modules_install: _emodinst_ _emodinst_post
1369
1370install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra)
1371PHONY += _emodinst_
1372_emodinst_:
1373 $(Q)mkdir -p $(MODLIB)/$(install-dir)
1374 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
1375
1376PHONY += _emodinst_post
1377_emodinst_post: _emodinst_
1378 $(call cmd,depmod)
1379
1380clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD))
1381
1382PHONY += $(clean-dirs) clean
1383$(clean-dirs):
1384 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1385
1386clean: rm-dirs := $(MODVERDIR)
1387clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
1388
1389help:
1390 @echo ' Building external modules.'
1391 @echo ' Syntax: make -C path/to/kernel/src M=$$PWD target'
1392 @echo ''
1393 @echo ' modules - default target, build the module(s)'
1394 @echo ' modules_install - install the module'
1395 @echo ' clean - remove generated files in module directory only'
1396 @echo ''
1397
1398# Dummies...
1399PHONY += prepare scripts
1400prepare: ;
1401scripts: ;
1402endif # KBUILD_EXTMOD
1403
1404clean: $(clean-dirs)
1405 $(call cmd,rmdirs)
1406 $(call cmd,rmfiles)
1407 @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
1408 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
1409 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
1410 -o -name '*.symtypes' -o -name 'modules.order' \
1411 -o -name modules.builtin -o -name '.tmp_*.o.*' \
1412 -o -name '*.gcno' \) -type f -print | xargs rm -f
1413
1414# Generate tags for editors
1415# ---------------------------------------------------------------------------
1416quiet_cmd_tags = GEN $@
1417 cmd_tags = $(CONFIG_SHELL) $(srctree)/scripts/tags.sh $@
1418
1419tags TAGS cscope gtags: FORCE
1420 $(call cmd,tags)
1421
1422# Scripts to check various things for consistency
1423# ---------------------------------------------------------------------------
1424
1425PHONY += includecheck versioncheck coccicheck namespacecheck export_report
1426
1427includecheck:
1428 find $(srctree)/* $(RCS_FIND_IGNORE) \
1429 -name '*.[hcS]' -type f -print | sort \
1430 | xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl
1431
1432versioncheck:
1433 find $(srctree)/* $(RCS_FIND_IGNORE) \
1434 -name '*.[hcS]' -type f -print | sort \
1435 | xargs $(PERL) -w $(srctree)/scripts/checkversion.pl
1436
1437coccicheck:
1438 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
1439
1440namespacecheck:
1441 $(PERL) $(srctree)/scripts/namespace.pl
1442
1443export_report:
1444 $(PERL) $(srctree)/scripts/export_report.pl
1445
1446endif #ifeq ($(config-targets),1)
1447endif #ifeq ($(mixed-targets),1)
1448
1449PHONY += checkstack kernelrelease kernelversion
1450
1451# UML needs a little special treatment here. It wants to use the host
1452# toolchain, so needs $(SUBARCH) passed to checkstack.pl. Everyone
1453# else wants $(ARCH), including people doing cross-builds, which means
1454# that $(SUBARCH) doesn't work here.
1455ifeq ($(ARCH), um)
1456CHECKSTACK_ARCH := $(SUBARCH)
1457else
1458CHECKSTACK_ARCH := $(ARCH)
1459endif
1460checkstack:
1461 $(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
1462 $(PERL) $(src)/scripts/checkstack.pl $(CHECKSTACK_ARCH)
1463
1464kernelrelease:
1465 @echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1466
1467kernelversion:
1468 @echo $(KERNELVERSION)
1469
1470# Single targets
1471# ---------------------------------------------------------------------------
1472# Single targets are compatible with:
1473# - build with mixed source and output
1474# - build with separate output dir 'make O=...'
1475# - external modules
1476#
1477# target-dir => where to store outputfile
1478# build-dir => directory in kernel source tree to use
1479
1480ifeq ($(KBUILD_EXTMOD),)
1481 build-dir = $(patsubst %/,%,$(dir $@))
1482 target-dir = $(dir $@)
1483else
1484 zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
1485 build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
1486 target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
1487endif
1488
1489%.s: %.c prepare scripts FORCE
1490 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1491%.i: %.c prepare scripts FORCE
1492 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1493%.o: %.c prepare scripts FORCE
1494 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1495%.lst: %.c prepare scripts FORCE
1496 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1497%.s: %.S prepare scripts FORCE
1498 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1499%.o: %.S prepare scripts FORCE
1500 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1501%.symtypes: %.c prepare scripts FORCE
1502 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1503
1504# Modules
1505/: prepare scripts FORCE
1506 $(cmd_crmodverdir)
1507 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1508 $(build)=$(build-dir)
1509%/: prepare scripts FORCE
1510 $(cmd_crmodverdir)
1511 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1512 $(build)=$(build-dir)
1513%.ko: prepare scripts FORCE
1514 $(cmd_crmodverdir)
1515 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1516 $(build)=$(build-dir) $(@:.ko=.o)
1517 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1518
1519# FIXME Should go into a make.lib or something
1520# ===========================================================================
1521
1522quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
1523 cmd_rmdirs = rm -rf $(rm-dirs)
1524
1525quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
1526 cmd_rmfiles = rm -f $(rm-files)
1527
1528# Run depmod only if we have System.map and depmod is executable
1529quiet_cmd_depmod = DEPMOD $(KERNELRELEASE)
1530 cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \
1531 $(KERNELRELEASE)
1532
1533# Create temporary dir for module support files
1534# clean it up only when building all modules
1535cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \
1536 $(if $(KBUILD_MODULES),; rm -f $(MODVERDIR)/*)
1537
1538a_flags = -Wp,-MD,$(depfile) $(KBUILD_AFLAGS) $(AFLAGS_KERNEL) \
1539 $(KBUILD_AFLAGS_KERNEL) \
1540 $(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(KBUILD_CPPFLAGS) \
1541 $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(basetarget).o)
1542
1543quiet_cmd_as_o_S = AS $@
1544cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
1545
1546# read all saved command lines
1547
1548targets := $(wildcard $(sort $(targets)))
1549cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
1550
1551ifneq ($(cmd_files),)
1552 $(cmd_files): ; # Do not try to update included dependency files
1553 include $(cmd_files)
1554endif
1555
1556# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
1557# Usage:
1558# $(Q)$(MAKE) $(clean)=dir
1559clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
1560
1561endif # skip-makefile
1562
1563PHONY += FORCE
1564FORCE:
1565
1566# Declare the contents of the .PHONY variable as phony. We keep that
1567# information in a variable so we can use it in if_changed and friends.
1568.PHONY: $(PHONY)