Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00
4 * series of PDAs
5 *
6 * Copyright (c) 2004-2005 Richard Purdie
7 *
8 * Based on code written by Sharp for 2.4 kernels
9 */
10
11#undef DEBUG
12
13#include <linux/module.h>
14#include <linux/kernel.h>
15#include <linux/interrupt.h>
16#include <linux/platform_device.h>
17#include <linux/apm-emulation.h>
18#include <linux/timer.h>
19#include <linux/delay.h>
20#include <linux/leds.h>
21#include <linux/suspend.h>
22#include <linux/gpio.h>
23#include <linux/io.h>
24
25#include <asm/mach-types.h>
26#include "pm.h"
27#include "pxa2xx-regs.h"
28#include "regs-rtc.h"
29#include "sharpsl_pm.h"
30
31/*
32 * Constants
33 */
34#define SHARPSL_CHARGE_ON_TIME_INTERVAL (msecs_to_jiffies(1*60*1000)) /* 1 min */
35#define SHARPSL_CHARGE_FINISH_TIME (msecs_to_jiffies(10*60*1000)) /* 10 min */
36#define SHARPSL_BATCHK_TIME (msecs_to_jiffies(15*1000)) /* 15 sec */
37#define SHARPSL_BATCHK_TIME_SUSPEND (60*10) /* 10 min */
38
39#define SHARPSL_WAIT_CO_TIME 15 /* 15 sec */
40#define SHARPSL_WAIT_DISCHARGE_ON 100 /* 100 msec */
41#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP 10 /* 10 msec */
42#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT 10 /* 10 msec */
43#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN 10 /* 10 msec */
44#define SHARPSL_CHARGE_WAIT_TIME 15 /* 15 msec */
45#define SHARPSL_CHARGE_CO_CHECK_TIME 5 /* 5 msec */
46#define SHARPSL_CHARGE_RETRY_CNT 1 /* eqv. 10 min */
47
48/*
49 * Prototypes
50 */
51#ifdef CONFIG_PM
52static int sharpsl_off_charge_battery(void);
53static int sharpsl_check_battery_voltage(void);
54#endif
55static int sharpsl_check_battery_temp(void);
56static int sharpsl_ac_check(void);
57static int sharpsl_average_value(int ad);
58static void sharpsl_average_clear(void);
59static void sharpsl_charge_toggle(struct work_struct *private_);
60static void sharpsl_battery_thread(struct work_struct *private_);
61
62
63/*
64 * Variables
65 */
66struct sharpsl_pm_status sharpsl_pm;
67static DECLARE_DELAYED_WORK(toggle_charger, sharpsl_charge_toggle);
68static DECLARE_DELAYED_WORK(sharpsl_bat, sharpsl_battery_thread);
69DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
70
71
72
73struct battery_thresh sharpsl_battery_levels_acin[] = {
74 { 213, 100},
75 { 212, 98},
76 { 211, 95},
77 { 210, 93},
78 { 209, 90},
79 { 208, 88},
80 { 207, 85},
81 { 206, 83},
82 { 205, 80},
83 { 204, 78},
84 { 203, 75},
85 { 202, 73},
86 { 201, 70},
87 { 200, 68},
88 { 199, 65},
89 { 198, 63},
90 { 197, 60},
91 { 196, 58},
92 { 195, 55},
93 { 194, 53},
94 { 193, 50},
95 { 192, 48},
96 { 192, 45},
97 { 191, 43},
98 { 191, 40},
99 { 190, 38},
100 { 190, 35},
101 { 189, 33},
102 { 188, 30},
103 { 187, 28},
104 { 186, 25},
105 { 185, 23},
106 { 184, 20},
107 { 183, 18},
108 { 182, 15},
109 { 181, 13},
110 { 180, 10},
111 { 179, 8},
112 { 178, 5},
113 { 0, 0},
114};
115
116struct battery_thresh sharpsl_battery_levels_noac[] = {
117 { 213, 100},
118 { 212, 98},
119 { 211, 95},
120 { 210, 93},
121 { 209, 90},
122 { 208, 88},
123 { 207, 85},
124 { 206, 83},
125 { 205, 80},
126 { 204, 78},
127 { 203, 75},
128 { 202, 73},
129 { 201, 70},
130 { 200, 68},
131 { 199, 65},
132 { 198, 63},
133 { 197, 60},
134 { 196, 58},
135 { 195, 55},
136 { 194, 53},
137 { 193, 50},
138 { 192, 48},
139 { 191, 45},
140 { 190, 43},
141 { 189, 40},
142 { 188, 38},
143 { 187, 35},
144 { 186, 33},
145 { 185, 30},
146 { 184, 28},
147 { 183, 25},
148 { 182, 23},
149 { 181, 20},
150 { 180, 18},
151 { 179, 15},
152 { 178, 13},
153 { 177, 10},
154 { 176, 8},
155 { 175, 5},
156 { 0, 0},
157};
158
159/* MAX1111 Commands */
160#define MAXCTRL_PD0 (1u << 0)
161#define MAXCTRL_PD1 (1u << 1)
162#define MAXCTRL_SGL (1u << 2)
163#define MAXCTRL_UNI (1u << 3)
164#define MAXCTRL_SEL_SH 4
165#define MAXCTRL_STR (1u << 7)
166
167extern int max1111_read_channel(int);
168/*
169 * Read MAX1111 ADC
170 */
171int sharpsl_pm_pxa_read_max1111(int channel)
172{
173 /* max1111 accepts channels from 0-3, however,
174 * it is encoded from 0-7 here in the code.
175 */
176 return max1111_read_channel(channel >> 1);
177}
178
179static int get_percentage(int voltage)
180{
181 int i = sharpsl_pm.machinfo->bat_levels - 1;
182 int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0;
183 struct battery_thresh *thresh;
184
185 if (sharpsl_pm.charge_mode == CHRG_ON)
186 thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_acin_bl : sharpsl_pm.machinfo->bat_levels_acin;
187 else
188 thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_noac_bl : sharpsl_pm.machinfo->bat_levels_noac;
189
190 while (i > 0 && (voltage > thresh[i].voltage))
191 i--;
192
193 return thresh[i].percentage;
194}
195
196static int get_apm_status(int voltage)
197{
198 int low_thresh, high_thresh;
199
200 if (sharpsl_pm.charge_mode == CHRG_ON) {
201 high_thresh = sharpsl_pm.machinfo->status_high_acin;
202 low_thresh = sharpsl_pm.machinfo->status_low_acin;
203 } else {
204 high_thresh = sharpsl_pm.machinfo->status_high_noac;
205 low_thresh = sharpsl_pm.machinfo->status_low_noac;
206 }
207
208 if (voltage >= high_thresh)
209 return APM_BATTERY_STATUS_HIGH;
210 if (voltage >= low_thresh)
211 return APM_BATTERY_STATUS_LOW;
212 return APM_BATTERY_STATUS_CRITICAL;
213}
214
215void sharpsl_battery_kick(void)
216{
217 schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
218}
219
220static void sharpsl_battery_thread(struct work_struct *private_)
221{
222 int voltage, percent, apm_status, i;
223
224 if (!sharpsl_pm.machinfo)
225 return;
226
227 sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE);
228
229 /* Corgi cannot confirm when battery fully charged so periodically kick! */
230 if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON)
231 && time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_ON_TIME_INTERVAL))
232 schedule_delayed_work(&toggle_charger, 0);
233
234 for (i = 0; i < 5; i++) {
235 voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
236 if (voltage > 0)
237 break;
238 }
239 if (voltage <= 0) {
240 voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
241 dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
242 }
243
244 voltage = sharpsl_average_value(voltage);
245 apm_status = get_apm_status(voltage);
246 percent = get_percentage(voltage);
247
248 /* At low battery voltages, the voltage has a tendency to start
249 creeping back up so we try to avoid this here */
250 if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE)
251 || (apm_status == APM_BATTERY_STATUS_HIGH)
252 || percent <= sharpsl_pm.battstat.mainbat_percent) {
253 sharpsl_pm.battstat.mainbat_voltage = voltage;
254 sharpsl_pm.battstat.mainbat_status = apm_status;
255 sharpsl_pm.battstat.mainbat_percent = percent;
256 }
257
258 dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
259 sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
260
261 /* Suspend if critical battery level */
262 if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
263 && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
264 && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
265 sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
266 dev_err(sharpsl_pm.dev, "Fatal Off\n");
267 apm_queue_event(APM_CRITICAL_SUSPEND);
268 }
269
270 schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME);
271}
272
273void sharpsl_pm_led(int val)
274{
275 if (val == SHARPSL_LED_ERROR) {
276 dev_err(sharpsl_pm.dev, "Charging Error!\n");
277 } else if (val == SHARPSL_LED_ON) {
278 dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
279 led_trigger_event(sharpsl_charge_led_trigger, LED_FULL);
280 } else {
281 dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
282 led_trigger_event(sharpsl_charge_led_trigger, LED_OFF);
283 }
284}
285
286static void sharpsl_charge_on(void)
287{
288 dev_dbg(sharpsl_pm.dev, "Turning Charger On\n");
289
290 sharpsl_pm.full_count = 0;
291 sharpsl_pm.charge_mode = CHRG_ON;
292 schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250));
293 schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500));
294}
295
296static void sharpsl_charge_off(void)
297{
298 dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n");
299
300 sharpsl_pm.machinfo->charge(0);
301 sharpsl_pm_led(SHARPSL_LED_OFF);
302 sharpsl_pm.charge_mode = CHRG_OFF;
303
304 schedule_delayed_work(&sharpsl_bat, 0);
305}
306
307static void sharpsl_charge_error(void)
308{
309 sharpsl_pm_led(SHARPSL_LED_ERROR);
310 sharpsl_pm.machinfo->charge(0);
311 sharpsl_pm.charge_mode = CHRG_ERROR;
312}
313
314static void sharpsl_charge_toggle(struct work_struct *private_)
315{
316 dev_dbg(sharpsl_pm.dev, "Toggling Charger at time: %lx\n", jiffies);
317
318 if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
319 sharpsl_charge_off();
320 return;
321 } else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) {
322 sharpsl_charge_error();
323 return;
324 }
325
326 sharpsl_pm_led(SHARPSL_LED_ON);
327 sharpsl_pm.machinfo->charge(0);
328 mdelay(SHARPSL_CHARGE_WAIT_TIME);
329 sharpsl_pm.machinfo->charge(1);
330
331 sharpsl_pm.charge_start_time = jiffies;
332}
333
334static void sharpsl_ac_timer(struct timer_list *unused)
335{
336 int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
337
338 dev_dbg(sharpsl_pm.dev, "AC Status: %d\n", acin);
339
340 sharpsl_average_clear();
341 if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
342 sharpsl_charge_on();
343 else if (sharpsl_pm.charge_mode == CHRG_ON)
344 sharpsl_charge_off();
345
346 schedule_delayed_work(&sharpsl_bat, 0);
347}
348
349
350static irqreturn_t sharpsl_ac_isr(int irq, void *dev_id)
351{
352 /* Delay the event slightly to debounce */
353 /* Must be a smaller delay than the chrg_full_isr below */
354 mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
355
356 return IRQ_HANDLED;
357}
358
359static void sharpsl_chrg_full_timer(struct timer_list *unused)
360{
361 dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies);
362
363 sharpsl_pm.full_count++;
364
365 if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
366 dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n");
367 if (sharpsl_pm.charge_mode == CHRG_ON)
368 sharpsl_charge_off();
369 } else if (sharpsl_pm.full_count < 2) {
370 dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n");
371 schedule_delayed_work(&toggle_charger, 0);
372 } else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) {
373 dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n");
374 schedule_delayed_work(&toggle_charger, 0);
375 } else {
376 sharpsl_charge_off();
377 sharpsl_pm.charge_mode = CHRG_DONE;
378 dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n");
379 }
380}
381
382/* Charging Finished Interrupt (Not present on Corgi) */
383/* Can trigger at the same time as an AC status change so
384 delay until after that has been processed */
385static irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id)
386{
387 if (sharpsl_pm.flags & SHARPSL_SUSPENDED)
388 return IRQ_HANDLED;
389
390 /* delay until after any ac interrupt */
391 mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500));
392
393 return IRQ_HANDLED;
394}
395
396static irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id)
397{
398 int is_fatal = 0;
399
400 if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) {
401 dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n");
402 is_fatal = 1;
403 }
404
405 if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)) {
406 dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n");
407 is_fatal = 1;
408 }
409
410 if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) {
411 sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
412 apm_queue_event(APM_CRITICAL_SUSPEND);
413 }
414
415 return IRQ_HANDLED;
416}
417
418/*
419 * Maintain an average of the last 10 readings
420 */
421#define SHARPSL_CNV_VALUE_NUM 10
422static int sharpsl_ad_index;
423
424static void sharpsl_average_clear(void)
425{
426 sharpsl_ad_index = 0;
427}
428
429static int sharpsl_average_value(int ad)
430{
431 int i, ad_val = 0;
432 static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1];
433
434 if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) {
435 sharpsl_ad_index = 0;
436 return ad;
437 }
438
439 sharpsl_ad[sharpsl_ad_index] = ad;
440 sharpsl_ad_index++;
441 if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
442 for (i = 0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
443 sharpsl_ad[i] = sharpsl_ad[i+1];
444 sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
445 }
446 for (i = 0; i < sharpsl_ad_index; i++)
447 ad_val += sharpsl_ad[i];
448
449 return ad_val / sharpsl_ad_index;
450}
451
452/*
453 * Take an array of 5 integers, remove the maximum and minimum values
454 * and return the average.
455 */
456static int get_select_val(int *val)
457{
458 int i, j, k, temp, sum = 0;
459
460 /* Find MAX val */
461 temp = val[0];
462 j = 0;
463 for (i = 1; i < 5; i++) {
464 if (temp < val[i]) {
465 temp = val[i];
466 j = i;
467 }
468 }
469
470 /* Find MIN val */
471 temp = val[4];
472 k = 4;
473 for (i = 3; i >= 0; i--) {
474 if (temp > val[i]) {
475 temp = val[i];
476 k = i;
477 }
478 }
479
480 for (i = 0; i < 5; i++)
481 if (i != j && i != k)
482 sum += val[i];
483
484 dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
485
486 return sum/3;
487}
488
489static int sharpsl_check_battery_temp(void)
490{
491 int val, i, buff[5];
492
493 /* Check battery temperature */
494 for (i = 0; i < 5; i++) {
495 mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
496 sharpsl_pm.machinfo->measure_temp(1);
497 mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
498 buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP);
499 sharpsl_pm.machinfo->measure_temp(0);
500 }
501
502 val = get_select_val(buff);
503
504 dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
505 if (val > sharpsl_pm.machinfo->charge_on_temp) {
506 printk(KERN_WARNING "Not charging: temperature out of limits.\n");
507 return -1;
508 }
509
510 return 0;
511}
512
513#ifdef CONFIG_PM
514static int sharpsl_check_battery_voltage(void)
515{
516 int val, i, buff[5];
517
518 /* disable charge, enable discharge */
519 sharpsl_pm.machinfo->charge(0);
520 sharpsl_pm.machinfo->discharge(1);
521 mdelay(SHARPSL_WAIT_DISCHARGE_ON);
522
523 if (sharpsl_pm.machinfo->discharge1)
524 sharpsl_pm.machinfo->discharge1(1);
525
526 /* Check battery voltage */
527 for (i = 0; i < 5; i++) {
528 buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
529 mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
530 }
531
532 if (sharpsl_pm.machinfo->discharge1)
533 sharpsl_pm.machinfo->discharge1(0);
534
535 sharpsl_pm.machinfo->discharge(0);
536
537 val = get_select_val(buff);
538 dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
539
540 if (val < sharpsl_pm.machinfo->charge_on_volt)
541 return -1;
542
543 return 0;
544}
545#endif
546
547static int sharpsl_ac_check(void)
548{
549 int temp, i, buff[5];
550
551 for (i = 0; i < 5; i++) {
552 buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
553 mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
554 }
555
556 temp = get_select_val(buff);
557 dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n", temp);
558
559 if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
560 dev_err(sharpsl_pm.dev, "Error: AC check failed: voltage %d.\n", temp);
561 return -1;
562 }
563
564 return 0;
565}
566
567#ifdef CONFIG_PM
568static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state)
569{
570 sharpsl_pm.flags |= SHARPSL_SUSPENDED;
571 flush_delayed_work(&toggle_charger);
572 flush_delayed_work(&sharpsl_bat);
573
574 if (sharpsl_pm.charge_mode == CHRG_ON)
575 sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
576 else
577 sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
578
579 return 0;
580}
581
582static int sharpsl_pm_resume(struct platform_device *pdev)
583{
584 /* Clear the reset source indicators as they break the bootloader upon reboot */
585 RCSR = 0x0f;
586 sharpsl_average_clear();
587 sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED;
588 sharpsl_pm.flags &= ~SHARPSL_SUSPENDED;
589
590 return 0;
591}
592
593static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
594{
595 dev_dbg(sharpsl_pm.dev, "Time is: %08x\n", RCNR);
596
597 dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n", sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
598 /* not charging and AC-IN! */
599
600 if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
601 dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n");
602 sharpsl_pm.charge_mode = CHRG_OFF;
603 sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
604 sharpsl_off_charge_battery();
605 }
606
607 sharpsl_pm.machinfo->presuspend();
608
609 PEDR = 0xffffffff; /* clear it */
610
611 sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE;
612 if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
613 RTSR &= RTSR_ALE;
614 RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
615 dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n", RTAR);
616 sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
617 } else if (alarm_enable) {
618 RTSR &= RTSR_ALE;
619 RTAR = alarm_time;
620 dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n", RTAR);
621 } else {
622 dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
623 }
624
625 pxa_pm_enter(state);
626
627 sharpsl_pm.machinfo->postsuspend();
628
629 dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n", PEDR);
630}
631
632static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
633{
634 if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable)) {
635 if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
636 dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
637 corgi_goto_sleep(alarm_time, alarm_enable, state);
638 return 1;
639 }
640 if (sharpsl_off_charge_battery()) {
641 dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
642 corgi_goto_sleep(alarm_time, alarm_enable, state);
643 return 1;
644 }
645 dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
646 }
647
648 if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) ||
649 (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL))) {
650 dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
651 corgi_goto_sleep(alarm_time, alarm_enable, state);
652 return 1;
653 }
654
655 return 0;
656}
657
658static int corgi_pxa_pm_enter(suspend_state_t state)
659{
660 unsigned long alarm_time = RTAR;
661 unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0);
662
663 dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n");
664
665 corgi_goto_sleep(alarm_time, alarm_status, state);
666
667 while (corgi_enter_suspend(alarm_time, alarm_status, state))
668 {}
669
670 if (sharpsl_pm.machinfo->earlyresume)
671 sharpsl_pm.machinfo->earlyresume();
672
673 dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
674
675 return 0;
676}
677
678static int sharpsl_off_charge_error(void)
679{
680 dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n");
681 sharpsl_pm.machinfo->charge(0);
682 sharpsl_pm_led(SHARPSL_LED_ERROR);
683 sharpsl_pm.charge_mode = CHRG_ERROR;
684 return 1;
685}
686
687/*
688 * Charging Control while suspended
689 * Return 1 - go straight to sleep
690 * Return 0 - sleep or wakeup depending on other factors
691 */
692static int sharpsl_off_charge_battery(void)
693{
694 int time;
695
696 dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode);
697
698 if (sharpsl_pm.charge_mode == CHRG_OFF) {
699 dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
700
701 /* AC Check */
702 if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0))
703 return sharpsl_off_charge_error();
704
705 /* Start Charging */
706 sharpsl_pm_led(SHARPSL_LED_ON);
707 sharpsl_pm.machinfo->charge(0);
708 mdelay(SHARPSL_CHARGE_WAIT_TIME);
709 sharpsl_pm.machinfo->charge(1);
710
711 sharpsl_pm.charge_mode = CHRG_ON;
712 sharpsl_pm.full_count = 0;
713
714 return 1;
715 } else if (sharpsl_pm.charge_mode != CHRG_ON) {
716 return 1;
717 }
718
719 if (sharpsl_pm.full_count == 0) {
720 int time;
721
722 dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
723
724 if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0))
725 return sharpsl_off_charge_error();
726
727 sharpsl_pm.machinfo->charge(0);
728 mdelay(SHARPSL_CHARGE_WAIT_TIME);
729 sharpsl_pm.machinfo->charge(1);
730 sharpsl_pm.charge_mode = CHRG_ON;
731
732 mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
733
734 time = RCNR;
735 while (1) {
736 /* Check if any wakeup event had occurred */
737 if (sharpsl_pm.machinfo->charger_wakeup())
738 return 0;
739 /* Check for timeout */
740 if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
741 return 1;
742 if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
743 dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occurred. Retrying to check\n");
744 sharpsl_pm.full_count++;
745 sharpsl_pm.machinfo->charge(0);
746 mdelay(SHARPSL_CHARGE_WAIT_TIME);
747 sharpsl_pm.machinfo->charge(1);
748 return 1;
749 }
750 }
751 }
752
753 dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n");
754
755 mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
756
757 time = RCNR;
758 while (1) {
759 /* Check if any wakeup event had occurred */
760 if (sharpsl_pm.machinfo->charger_wakeup())
761 return 0;
762 /* Check for timeout */
763 if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
764 if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) {
765 dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n");
766 sharpsl_pm.full_count = 0;
767 }
768 sharpsl_pm.full_count++;
769 return 1;
770 }
771 if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
772 dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n");
773 sharpsl_pm_led(SHARPSL_LED_OFF);
774 sharpsl_pm.machinfo->charge(0);
775 sharpsl_pm.charge_mode = CHRG_DONE;
776 return 1;
777 }
778 }
779}
780#else
781#define sharpsl_pm_suspend NULL
782#define sharpsl_pm_resume NULL
783#endif
784
785static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
786{
787 return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_percent);
788}
789
790static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
791{
792 return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_voltage);
793}
794
795static DEVICE_ATTR_RO(battery_percentage);
796static DEVICE_ATTR_RO(battery_voltage);
797
798extern void (*apm_get_power_status)(struct apm_power_info *);
799
800static void sharpsl_apm_get_power_status(struct apm_power_info *info)
801{
802 info->ac_line_status = sharpsl_pm.battstat.ac_status;
803
804 if (sharpsl_pm.charge_mode == CHRG_ON)
805 info->battery_status = APM_BATTERY_STATUS_CHARGING;
806 else
807 info->battery_status = sharpsl_pm.battstat.mainbat_status;
808
809 info->battery_flag = (1 << info->battery_status);
810 info->battery_life = sharpsl_pm.battstat.mainbat_percent;
811}
812
813#ifdef CONFIG_PM
814static const struct platform_suspend_ops sharpsl_pm_ops = {
815 .prepare = pxa_pm_prepare,
816 .finish = pxa_pm_finish,
817 .enter = corgi_pxa_pm_enter,
818 .valid = suspend_valid_only_mem,
819};
820#endif
821
822static int sharpsl_pm_probe(struct platform_device *pdev)
823{
824 int ret, irq;
825
826 if (!pdev->dev.platform_data)
827 return -EINVAL;
828
829 sharpsl_pm.dev = &pdev->dev;
830 sharpsl_pm.machinfo = pdev->dev.platform_data;
831 sharpsl_pm.charge_mode = CHRG_OFF;
832 sharpsl_pm.flags = 0;
833
834 timer_setup(&sharpsl_pm.ac_timer, sharpsl_ac_timer, 0);
835
836 timer_setup(&sharpsl_pm.chrg_full_timer, sharpsl_chrg_full_timer, 0);
837
838 led_trigger_register_simple("sharpsl-charge", &sharpsl_charge_led_trigger);
839
840 sharpsl_pm.machinfo->init();
841
842 gpio_request(sharpsl_pm.machinfo->gpio_acin, "AC IN");
843 gpio_direction_input(sharpsl_pm.machinfo->gpio_acin);
844 gpio_request(sharpsl_pm.machinfo->gpio_batfull, "Battery Full");
845 gpio_direction_input(sharpsl_pm.machinfo->gpio_batfull);
846 gpio_request(sharpsl_pm.machinfo->gpio_batlock, "Battery Lock");
847 gpio_direction_input(sharpsl_pm.machinfo->gpio_batlock);
848
849 /* Register interrupt handlers */
850 irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_acin);
851 if (request_irq(irq, sharpsl_ac_isr, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
852 dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
853 }
854
855 irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_batlock);
856 if (request_irq(irq, sharpsl_fatal_isr, IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) {
857 dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
858 }
859
860 if (sharpsl_pm.machinfo->gpio_fatal) {
861 irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_fatal);
862 if (request_irq(irq, sharpsl_fatal_isr, IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) {
863 dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
864 }
865 }
866
867 if (sharpsl_pm.machinfo->batfull_irq) {
868 /* Register interrupt handler. */
869 irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_batfull);
870 if (request_irq(irq, sharpsl_chrg_full_isr, IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
871 dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
872 }
873 }
874
875 ret = device_create_file(&pdev->dev, &dev_attr_battery_percentage);
876 ret |= device_create_file(&pdev->dev, &dev_attr_battery_voltage);
877 if (ret != 0)
878 dev_warn(&pdev->dev, "Failed to register attributes (%d)\n", ret);
879
880 apm_get_power_status = sharpsl_apm_get_power_status;
881
882#ifdef CONFIG_PM
883 suspend_set_ops(&sharpsl_pm_ops);
884#endif
885
886 mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
887
888 return 0;
889}
890
891static void sharpsl_pm_remove(struct platform_device *pdev)
892{
893 suspend_set_ops(NULL);
894
895 device_remove_file(&pdev->dev, &dev_attr_battery_percentage);
896 device_remove_file(&pdev->dev, &dev_attr_battery_voltage);
897
898 led_trigger_unregister_simple(sharpsl_charge_led_trigger);
899
900 free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
901 free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
902
903 if (sharpsl_pm.machinfo->gpio_fatal)
904 free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);
905
906 if (sharpsl_pm.machinfo->batfull_irq)
907 free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
908
909 gpio_free(sharpsl_pm.machinfo->gpio_batlock);
910 gpio_free(sharpsl_pm.machinfo->gpio_batfull);
911 gpio_free(sharpsl_pm.machinfo->gpio_acin);
912
913 if (sharpsl_pm.machinfo->exit)
914 sharpsl_pm.machinfo->exit();
915
916 del_timer_sync(&sharpsl_pm.chrg_full_timer);
917 del_timer_sync(&sharpsl_pm.ac_timer);
918}
919
920static struct platform_driver sharpsl_pm_driver = {
921 .probe = sharpsl_pm_probe,
922 .remove = sharpsl_pm_remove,
923 .suspend = sharpsl_pm_suspend,
924 .resume = sharpsl_pm_resume,
925 .driver = {
926 .name = "sharpsl-pm",
927 },
928};
929
930static int sharpsl_pm_init(void)
931{
932 return platform_driver_register(&sharpsl_pm_driver);
933}
934
935static void sharpsl_pm_exit(void)
936{
937 platform_driver_unregister(&sharpsl_pm_driver);
938}
939
940late_initcall(sharpsl_pm_init);
941module_exit(sharpsl_pm_exit);
1/*
2 * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00
3 * series of PDAs
4 *
5 * Copyright (c) 2004-2005 Richard Purdie
6 *
7 * Based on code written by Sharp for 2.4 kernels
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 *
13 */
14
15#undef DEBUG
16
17#include <linux/module.h>
18#include <linux/kernel.h>
19#include <linux/interrupt.h>
20#include <linux/platform_device.h>
21#include <linux/apm-emulation.h>
22#include <linux/timer.h>
23#include <linux/delay.h>
24#include <linux/leds.h>
25#include <linux/suspend.h>
26#include <linux/gpio.h>
27
28#include <asm/mach-types.h>
29#include <mach/pm.h>
30#include <mach/pxa2xx-regs.h>
31#include <mach/regs-rtc.h>
32#include <mach/sharpsl_pm.h>
33
34/*
35 * Constants
36 */
37#define SHARPSL_CHARGE_ON_TIME_INTERVAL (msecs_to_jiffies(1*60*1000)) /* 1 min */
38#define SHARPSL_CHARGE_FINISH_TIME (msecs_to_jiffies(10*60*1000)) /* 10 min */
39#define SHARPSL_BATCHK_TIME (msecs_to_jiffies(15*1000)) /* 15 sec */
40#define SHARPSL_BATCHK_TIME_SUSPEND (60*10) /* 10 min */
41
42#define SHARPSL_WAIT_CO_TIME 15 /* 15 sec */
43#define SHARPSL_WAIT_DISCHARGE_ON 100 /* 100 msec */
44#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP 10 /* 10 msec */
45#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT 10 /* 10 msec */
46#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN 10 /* 10 msec */
47#define SHARPSL_CHARGE_WAIT_TIME 15 /* 15 msec */
48#define SHARPSL_CHARGE_CO_CHECK_TIME 5 /* 5 msec */
49#define SHARPSL_CHARGE_RETRY_CNT 1 /* eqv. 10 min */
50
51/*
52 * Prototypes
53 */
54#ifdef CONFIG_PM
55static int sharpsl_off_charge_battery(void);
56static int sharpsl_check_battery_voltage(void);
57static int sharpsl_fatal_check(void);
58#endif
59static int sharpsl_check_battery_temp(void);
60static int sharpsl_ac_check(void);
61static int sharpsl_average_value(int ad);
62static void sharpsl_average_clear(void);
63static void sharpsl_charge_toggle(struct work_struct *private_);
64static void sharpsl_battery_thread(struct work_struct *private_);
65
66
67/*
68 * Variables
69 */
70struct sharpsl_pm_status sharpsl_pm;
71static DECLARE_DELAYED_WORK(toggle_charger, sharpsl_charge_toggle);
72static DECLARE_DELAYED_WORK(sharpsl_bat, sharpsl_battery_thread);
73DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
74
75
76
77struct battery_thresh sharpsl_battery_levels_acin[] = {
78 { 213, 100},
79 { 212, 98},
80 { 211, 95},
81 { 210, 93},
82 { 209, 90},
83 { 208, 88},
84 { 207, 85},
85 { 206, 83},
86 { 205, 80},
87 { 204, 78},
88 { 203, 75},
89 { 202, 73},
90 { 201, 70},
91 { 200, 68},
92 { 199, 65},
93 { 198, 63},
94 { 197, 60},
95 { 196, 58},
96 { 195, 55},
97 { 194, 53},
98 { 193, 50},
99 { 192, 48},
100 { 192, 45},
101 { 191, 43},
102 { 191, 40},
103 { 190, 38},
104 { 190, 35},
105 { 189, 33},
106 { 188, 30},
107 { 187, 28},
108 { 186, 25},
109 { 185, 23},
110 { 184, 20},
111 { 183, 18},
112 { 182, 15},
113 { 181, 13},
114 { 180, 10},
115 { 179, 8},
116 { 178, 5},
117 { 0, 0},
118};
119
120struct battery_thresh sharpsl_battery_levels_noac[] = {
121 { 213, 100},
122 { 212, 98},
123 { 211, 95},
124 { 210, 93},
125 { 209, 90},
126 { 208, 88},
127 { 207, 85},
128 { 206, 83},
129 { 205, 80},
130 { 204, 78},
131 { 203, 75},
132 { 202, 73},
133 { 201, 70},
134 { 200, 68},
135 { 199, 65},
136 { 198, 63},
137 { 197, 60},
138 { 196, 58},
139 { 195, 55},
140 { 194, 53},
141 { 193, 50},
142 { 192, 48},
143 { 191, 45},
144 { 190, 43},
145 { 189, 40},
146 { 188, 38},
147 { 187, 35},
148 { 186, 33},
149 { 185, 30},
150 { 184, 28},
151 { 183, 25},
152 { 182, 23},
153 { 181, 20},
154 { 180, 18},
155 { 179, 15},
156 { 178, 13},
157 { 177, 10},
158 { 176, 8},
159 { 175, 5},
160 { 0, 0},
161};
162
163/* MAX1111 Commands */
164#define MAXCTRL_PD0 (1u << 0)
165#define MAXCTRL_PD1 (1u << 1)
166#define MAXCTRL_SGL (1u << 2)
167#define MAXCTRL_UNI (1u << 3)
168#define MAXCTRL_SEL_SH 4
169#define MAXCTRL_STR (1u << 7)
170
171/*
172 * Read MAX1111 ADC
173 */
174int sharpsl_pm_pxa_read_max1111(int channel)
175{
176 /* Ugly, better move this function into another module */
177 if (machine_is_tosa())
178 return 0;
179
180 extern int max1111_read_channel(int);
181
182 /* max1111 accepts channels from 0-3, however,
183 * it is encoded from 0-7 here in the code.
184 */
185 return max1111_read_channel(channel >> 1);
186}
187
188static int get_percentage(int voltage)
189{
190 int i = sharpsl_pm.machinfo->bat_levels - 1;
191 int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0;
192 struct battery_thresh *thresh;
193
194 if (sharpsl_pm.charge_mode == CHRG_ON)
195 thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_acin_bl : sharpsl_pm.machinfo->bat_levels_acin;
196 else
197 thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_noac_bl : sharpsl_pm.machinfo->bat_levels_noac;
198
199 while (i > 0 && (voltage > thresh[i].voltage))
200 i--;
201
202 return thresh[i].percentage;
203}
204
205static int get_apm_status(int voltage)
206{
207 int low_thresh, high_thresh;
208
209 if (sharpsl_pm.charge_mode == CHRG_ON) {
210 high_thresh = sharpsl_pm.machinfo->status_high_acin;
211 low_thresh = sharpsl_pm.machinfo->status_low_acin;
212 } else {
213 high_thresh = sharpsl_pm.machinfo->status_high_noac;
214 low_thresh = sharpsl_pm.machinfo->status_low_noac;
215 }
216
217 if (voltage >= high_thresh)
218 return APM_BATTERY_STATUS_HIGH;
219 if (voltage >= low_thresh)
220 return APM_BATTERY_STATUS_LOW;
221 return APM_BATTERY_STATUS_CRITICAL;
222}
223
224void sharpsl_battery_kick(void)
225{
226 schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
227}
228EXPORT_SYMBOL(sharpsl_battery_kick);
229
230
231static void sharpsl_battery_thread(struct work_struct *private_)
232{
233 int voltage, percent, apm_status, i;
234
235 if (!sharpsl_pm.machinfo)
236 return;
237
238 sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE);
239
240 /* Corgi cannot confirm when battery fully charged so periodically kick! */
241 if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON)
242 && time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_ON_TIME_INTERVAL))
243 schedule_delayed_work(&toggle_charger, 0);
244
245 for (i = 0; i < 5; i++) {
246 voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
247 if (voltage > 0)
248 break;
249 }
250 if (voltage <= 0) {
251 voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
252 dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
253 }
254
255 voltage = sharpsl_average_value(voltage);
256 apm_status = get_apm_status(voltage);
257 percent = get_percentage(voltage);
258
259 /* At low battery voltages, the voltage has a tendency to start
260 creeping back up so we try to avoid this here */
261 if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE)
262 || (apm_status == APM_BATTERY_STATUS_HIGH)
263 || percent <= sharpsl_pm.battstat.mainbat_percent) {
264 sharpsl_pm.battstat.mainbat_voltage = voltage;
265 sharpsl_pm.battstat.mainbat_status = apm_status;
266 sharpsl_pm.battstat.mainbat_percent = percent;
267 }
268
269 dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
270 sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
271
272 /* Suspend if critical battery level */
273 if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
274 && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
275 && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
276 sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
277 dev_err(sharpsl_pm.dev, "Fatal Off\n");
278 apm_queue_event(APM_CRITICAL_SUSPEND);
279 }
280
281 schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME);
282}
283
284void sharpsl_pm_led(int val)
285{
286 if (val == SHARPSL_LED_ERROR) {
287 dev_err(sharpsl_pm.dev, "Charging Error!\n");
288 } else if (val == SHARPSL_LED_ON) {
289 dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
290 led_trigger_event(sharpsl_charge_led_trigger, LED_FULL);
291 } else {
292 dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
293 led_trigger_event(sharpsl_charge_led_trigger, LED_OFF);
294 }
295}
296
297static void sharpsl_charge_on(void)
298{
299 dev_dbg(sharpsl_pm.dev, "Turning Charger On\n");
300
301 sharpsl_pm.full_count = 0;
302 sharpsl_pm.charge_mode = CHRG_ON;
303 schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250));
304 schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500));
305}
306
307static void sharpsl_charge_off(void)
308{
309 dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n");
310
311 sharpsl_pm.machinfo->charge(0);
312 sharpsl_pm_led(SHARPSL_LED_OFF);
313 sharpsl_pm.charge_mode = CHRG_OFF;
314
315 schedule_delayed_work(&sharpsl_bat, 0);
316}
317
318static void sharpsl_charge_error(void)
319{
320 sharpsl_pm_led(SHARPSL_LED_ERROR);
321 sharpsl_pm.machinfo->charge(0);
322 sharpsl_pm.charge_mode = CHRG_ERROR;
323}
324
325static void sharpsl_charge_toggle(struct work_struct *private_)
326{
327 dev_dbg(sharpsl_pm.dev, "Toggling Charger at time: %lx\n", jiffies);
328
329 if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
330 sharpsl_charge_off();
331 return;
332 } else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) {
333 sharpsl_charge_error();
334 return;
335 }
336
337 sharpsl_pm_led(SHARPSL_LED_ON);
338 sharpsl_pm.machinfo->charge(0);
339 mdelay(SHARPSL_CHARGE_WAIT_TIME);
340 sharpsl_pm.machinfo->charge(1);
341
342 sharpsl_pm.charge_start_time = jiffies;
343}
344
345static void sharpsl_ac_timer(unsigned long data)
346{
347 int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
348
349 dev_dbg(sharpsl_pm.dev, "AC Status: %d\n", acin);
350
351 sharpsl_average_clear();
352 if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
353 sharpsl_charge_on();
354 else if (sharpsl_pm.charge_mode == CHRG_ON)
355 sharpsl_charge_off();
356
357 schedule_delayed_work(&sharpsl_bat, 0);
358}
359
360
361static irqreturn_t sharpsl_ac_isr(int irq, void *dev_id)
362{
363 /* Delay the event slightly to debounce */
364 /* Must be a smaller delay than the chrg_full_isr below */
365 mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
366
367 return IRQ_HANDLED;
368}
369
370static void sharpsl_chrg_full_timer(unsigned long data)
371{
372 dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies);
373
374 sharpsl_pm.full_count++;
375
376 if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
377 dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n");
378 if (sharpsl_pm.charge_mode == CHRG_ON)
379 sharpsl_charge_off();
380 } else if (sharpsl_pm.full_count < 2) {
381 dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n");
382 schedule_delayed_work(&toggle_charger, 0);
383 } else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) {
384 dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n");
385 schedule_delayed_work(&toggle_charger, 0);
386 } else {
387 sharpsl_charge_off();
388 sharpsl_pm.charge_mode = CHRG_DONE;
389 dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n");
390 }
391}
392
393/* Charging Finished Interrupt (Not present on Corgi) */
394/* Can trigger at the same time as an AC status change so
395 delay until after that has been processed */
396static irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id)
397{
398 if (sharpsl_pm.flags & SHARPSL_SUSPENDED)
399 return IRQ_HANDLED;
400
401 /* delay until after any ac interrupt */
402 mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500));
403
404 return IRQ_HANDLED;
405}
406
407static irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id)
408{
409 int is_fatal = 0;
410
411 if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) {
412 dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n");
413 is_fatal = 1;
414 }
415
416 if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)) {
417 dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n");
418 is_fatal = 1;
419 }
420
421 if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) {
422 sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
423 apm_queue_event(APM_CRITICAL_SUSPEND);
424 }
425
426 return IRQ_HANDLED;
427}
428
429/*
430 * Maintain an average of the last 10 readings
431 */
432#define SHARPSL_CNV_VALUE_NUM 10
433static int sharpsl_ad_index;
434
435static void sharpsl_average_clear(void)
436{
437 sharpsl_ad_index = 0;
438}
439
440static int sharpsl_average_value(int ad)
441{
442 int i, ad_val = 0;
443 static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1];
444
445 if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) {
446 sharpsl_ad_index = 0;
447 return ad;
448 }
449
450 sharpsl_ad[sharpsl_ad_index] = ad;
451 sharpsl_ad_index++;
452 if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
453 for (i = 0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
454 sharpsl_ad[i] = sharpsl_ad[i+1];
455 sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
456 }
457 for (i = 0; i < sharpsl_ad_index; i++)
458 ad_val += sharpsl_ad[i];
459
460 return ad_val / sharpsl_ad_index;
461}
462
463/*
464 * Take an array of 5 integers, remove the maximum and minimum values
465 * and return the average.
466 */
467static int get_select_val(int *val)
468{
469 int i, j, k, temp, sum = 0;
470
471 /* Find MAX val */
472 temp = val[0];
473 j = 0;
474 for (i = 1; i < 5; i++) {
475 if (temp < val[i]) {
476 temp = val[i];
477 j = i;
478 }
479 }
480
481 /* Find MIN val */
482 temp = val[4];
483 k = 4;
484 for (i = 3; i >= 0; i--) {
485 if (temp > val[i]) {
486 temp = val[i];
487 k = i;
488 }
489 }
490
491 for (i = 0; i < 5; i++)
492 if (i != j && i != k)
493 sum += val[i];
494
495 dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
496
497 return sum/3;
498}
499
500static int sharpsl_check_battery_temp(void)
501{
502 int val, i, buff[5];
503
504 /* Check battery temperature */
505 for (i = 0; i < 5; i++) {
506 mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
507 sharpsl_pm.machinfo->measure_temp(1);
508 mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
509 buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP);
510 sharpsl_pm.machinfo->measure_temp(0);
511 }
512
513 val = get_select_val(buff);
514
515 dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
516 if (val > sharpsl_pm.machinfo->charge_on_temp) {
517 printk(KERN_WARNING "Not charging: temperature out of limits.\n");
518 return -1;
519 }
520
521 return 0;
522}
523
524#ifdef CONFIG_PM
525static int sharpsl_check_battery_voltage(void)
526{
527 int val, i, buff[5];
528
529 /* disable charge, enable discharge */
530 sharpsl_pm.machinfo->charge(0);
531 sharpsl_pm.machinfo->discharge(1);
532 mdelay(SHARPSL_WAIT_DISCHARGE_ON);
533
534 if (sharpsl_pm.machinfo->discharge1)
535 sharpsl_pm.machinfo->discharge1(1);
536
537 /* Check battery voltage */
538 for (i = 0; i < 5; i++) {
539 buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
540 mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
541 }
542
543 if (sharpsl_pm.machinfo->discharge1)
544 sharpsl_pm.machinfo->discharge1(0);
545
546 sharpsl_pm.machinfo->discharge(0);
547
548 val = get_select_val(buff);
549 dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
550
551 if (val < sharpsl_pm.machinfo->charge_on_volt)
552 return -1;
553
554 return 0;
555}
556#endif
557
558static int sharpsl_ac_check(void)
559{
560 int temp, i, buff[5];
561
562 for (i = 0; i < 5; i++) {
563 buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
564 mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
565 }
566
567 temp = get_select_val(buff);
568 dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n", temp);
569
570 if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
571 dev_err(sharpsl_pm.dev, "Error: AC check failed: voltage %d.\n", temp);
572 return -1;
573 }
574
575 return 0;
576}
577
578#ifdef CONFIG_PM
579static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state)
580{
581 sharpsl_pm.flags |= SHARPSL_SUSPENDED;
582 flush_delayed_work_sync(&toggle_charger);
583 flush_delayed_work_sync(&sharpsl_bat);
584
585 if (sharpsl_pm.charge_mode == CHRG_ON)
586 sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
587 else
588 sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
589
590 return 0;
591}
592
593static int sharpsl_pm_resume(struct platform_device *pdev)
594{
595 /* Clear the reset source indicators as they break the bootloader upon reboot */
596 RCSR = 0x0f;
597 sharpsl_average_clear();
598 sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED;
599 sharpsl_pm.flags &= ~SHARPSL_SUSPENDED;
600
601 return 0;
602}
603
604static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
605{
606 dev_dbg(sharpsl_pm.dev, "Time is: %08x\n", RCNR);
607
608 dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n", sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
609 /* not charging and AC-IN! */
610
611 if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
612 dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n");
613 sharpsl_pm.charge_mode = CHRG_OFF;
614 sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
615 sharpsl_off_charge_battery();
616 }
617
618 sharpsl_pm.machinfo->presuspend();
619
620 PEDR = 0xffffffff; /* clear it */
621
622 sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE;
623 if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
624 RTSR &= RTSR_ALE;
625 RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
626 dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n", RTAR);
627 sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
628 } else if (alarm_enable) {
629 RTSR &= RTSR_ALE;
630 RTAR = alarm_time;
631 dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n", RTAR);
632 } else {
633 dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
634 }
635
636 pxa_pm_enter(state);
637
638 sharpsl_pm.machinfo->postsuspend();
639
640 dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n", PEDR);
641}
642
643static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
644{
645 if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable)) {
646 if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
647 dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
648 corgi_goto_sleep(alarm_time, alarm_enable, state);
649 return 1;
650 }
651 if (sharpsl_off_charge_battery()) {
652 dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
653 corgi_goto_sleep(alarm_time, alarm_enable, state);
654 return 1;
655 }
656 dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
657 }
658
659 if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) ||
660 (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL))) {
661 dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
662 corgi_goto_sleep(alarm_time, alarm_enable, state);
663 return 1;
664 }
665
666 return 0;
667}
668
669static int corgi_pxa_pm_enter(suspend_state_t state)
670{
671 unsigned long alarm_time = RTAR;
672 unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0);
673
674 dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n");
675
676 corgi_goto_sleep(alarm_time, alarm_status, state);
677
678 while (corgi_enter_suspend(alarm_time, alarm_status, state))
679 {}
680
681 if (sharpsl_pm.machinfo->earlyresume)
682 sharpsl_pm.machinfo->earlyresume();
683
684 dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
685
686 return 0;
687}
688
689/*
690 * Check for fatal battery errors
691 * Fatal returns -1
692 */
693static int sharpsl_fatal_check(void)
694{
695 int buff[5], temp, i, acin;
696
697 dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n");
698
699 /* Check AC-Adapter */
700 acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
701
702 if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
703 sharpsl_pm.machinfo->charge(0);
704 udelay(100);
705 sharpsl_pm.machinfo->discharge(1); /* enable discharge */
706 mdelay(SHARPSL_WAIT_DISCHARGE_ON);
707 }
708
709 if (sharpsl_pm.machinfo->discharge1)
710 sharpsl_pm.machinfo->discharge1(1);
711
712 /* Check battery : check inserting battery ? */
713 for (i = 0; i < 5; i++) {
714 buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
715 mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
716 }
717
718 if (sharpsl_pm.machinfo->discharge1)
719 sharpsl_pm.machinfo->discharge1(0);
720
721 if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
722 udelay(100);
723 sharpsl_pm.machinfo->charge(1);
724 sharpsl_pm.machinfo->discharge(0);
725 }
726
727 temp = get_select_val(buff);
728 dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %ld\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT));
729
730 if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) ||
731 (!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt)))
732 return -1;
733 return 0;
734}
735
736static int sharpsl_off_charge_error(void)
737{
738 dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n");
739 sharpsl_pm.machinfo->charge(0);
740 sharpsl_pm_led(SHARPSL_LED_ERROR);
741 sharpsl_pm.charge_mode = CHRG_ERROR;
742 return 1;
743}
744
745/*
746 * Charging Control while suspended
747 * Return 1 - go straight to sleep
748 * Return 0 - sleep or wakeup depending on other factors
749 */
750static int sharpsl_off_charge_battery(void)
751{
752 int time;
753
754 dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode);
755
756 if (sharpsl_pm.charge_mode == CHRG_OFF) {
757 dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
758
759 /* AC Check */
760 if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0))
761 return sharpsl_off_charge_error();
762
763 /* Start Charging */
764 sharpsl_pm_led(SHARPSL_LED_ON);
765 sharpsl_pm.machinfo->charge(0);
766 mdelay(SHARPSL_CHARGE_WAIT_TIME);
767 sharpsl_pm.machinfo->charge(1);
768
769 sharpsl_pm.charge_mode = CHRG_ON;
770 sharpsl_pm.full_count = 0;
771
772 return 1;
773 } else if (sharpsl_pm.charge_mode != CHRG_ON) {
774 return 1;
775 }
776
777 if (sharpsl_pm.full_count == 0) {
778 int time;
779
780 dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
781
782 if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0))
783 return sharpsl_off_charge_error();
784
785 sharpsl_pm.machinfo->charge(0);
786 mdelay(SHARPSL_CHARGE_WAIT_TIME);
787 sharpsl_pm.machinfo->charge(1);
788 sharpsl_pm.charge_mode = CHRG_ON;
789
790 mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
791
792 time = RCNR;
793 while (1) {
794 /* Check if any wakeup event had occurred */
795 if (sharpsl_pm.machinfo->charger_wakeup() != 0)
796 return 0;
797 /* Check for timeout */
798 if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
799 return 1;
800 if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
801 dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occurred. Retrying to check\n");
802 sharpsl_pm.full_count++;
803 sharpsl_pm.machinfo->charge(0);
804 mdelay(SHARPSL_CHARGE_WAIT_TIME);
805 sharpsl_pm.machinfo->charge(1);
806 return 1;
807 }
808 }
809 }
810
811 dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n");
812
813 mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
814
815 time = RCNR;
816 while (1) {
817 /* Check if any wakeup event had occurred */
818 if (sharpsl_pm.machinfo->charger_wakeup())
819 return 0;
820 /* Check for timeout */
821 if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
822 if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) {
823 dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n");
824 sharpsl_pm.full_count = 0;
825 }
826 sharpsl_pm.full_count++;
827 return 1;
828 }
829 if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
830 dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n");
831 sharpsl_pm_led(SHARPSL_LED_OFF);
832 sharpsl_pm.machinfo->charge(0);
833 sharpsl_pm.charge_mode = CHRG_DONE;
834 return 1;
835 }
836 }
837}
838#else
839#define sharpsl_pm_suspend NULL
840#define sharpsl_pm_resume NULL
841#endif
842
843static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
844{
845 return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_percent);
846}
847
848static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
849{
850 return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_voltage);
851}
852
853static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
854static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL);
855
856extern void (*apm_get_power_status)(struct apm_power_info *);
857
858static void sharpsl_apm_get_power_status(struct apm_power_info *info)
859{
860 info->ac_line_status = sharpsl_pm.battstat.ac_status;
861
862 if (sharpsl_pm.charge_mode == CHRG_ON)
863 info->battery_status = APM_BATTERY_STATUS_CHARGING;
864 else
865 info->battery_status = sharpsl_pm.battstat.mainbat_status;
866
867 info->battery_flag = (1 << info->battery_status);
868 info->battery_life = sharpsl_pm.battstat.mainbat_percent;
869}
870
871#ifdef CONFIG_PM
872static const struct platform_suspend_ops sharpsl_pm_ops = {
873 .prepare = pxa_pm_prepare,
874 .finish = pxa_pm_finish,
875 .enter = corgi_pxa_pm_enter,
876 .valid = suspend_valid_only_mem,
877};
878#endif
879
880static int __devinit sharpsl_pm_probe(struct platform_device *pdev)
881{
882 int ret;
883
884 if (!pdev->dev.platform_data)
885 return -EINVAL;
886
887 sharpsl_pm.dev = &pdev->dev;
888 sharpsl_pm.machinfo = pdev->dev.platform_data;
889 sharpsl_pm.charge_mode = CHRG_OFF;
890 sharpsl_pm.flags = 0;
891
892 init_timer(&sharpsl_pm.ac_timer);
893 sharpsl_pm.ac_timer.function = sharpsl_ac_timer;
894
895 init_timer(&sharpsl_pm.chrg_full_timer);
896 sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer;
897
898 led_trigger_register_simple("sharpsl-charge", &sharpsl_charge_led_trigger);
899
900 sharpsl_pm.machinfo->init();
901
902 gpio_request(sharpsl_pm.machinfo->gpio_acin, "AC IN");
903 gpio_direction_input(sharpsl_pm.machinfo->gpio_acin);
904 gpio_request(sharpsl_pm.machinfo->gpio_batfull, "Battery Full");
905 gpio_direction_input(sharpsl_pm.machinfo->gpio_batfull);
906 gpio_request(sharpsl_pm.machinfo->gpio_batlock, "Battery Lock");
907 gpio_direction_input(sharpsl_pm.machinfo->gpio_batlock);
908
909 /* Register interrupt handlers */
910 if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
911 dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin));
912 }
913
914 if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) {
915 dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock));
916 }
917
918 if (sharpsl_pm.machinfo->gpio_fatal) {
919 if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) {
920 dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal));
921 }
922 }
923
924 if (sharpsl_pm.machinfo->batfull_irq) {
925 /* Register interrupt handler. */
926 if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
927 dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
928 }
929 }
930
931 ret = device_create_file(&pdev->dev, &dev_attr_battery_percentage);
932 ret |= device_create_file(&pdev->dev, &dev_attr_battery_voltage);
933 if (ret != 0)
934 dev_warn(&pdev->dev, "Failed to register attributes (%d)\n", ret);
935
936 apm_get_power_status = sharpsl_apm_get_power_status;
937
938#ifdef CONFIG_PM
939 suspend_set_ops(&sharpsl_pm_ops);
940#endif
941
942 mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
943
944 return 0;
945}
946
947static int sharpsl_pm_remove(struct platform_device *pdev)
948{
949 suspend_set_ops(NULL);
950
951 device_remove_file(&pdev->dev, &dev_attr_battery_percentage);
952 device_remove_file(&pdev->dev, &dev_attr_battery_voltage);
953
954 led_trigger_unregister_simple(sharpsl_charge_led_trigger);
955
956 free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
957 free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
958
959 if (sharpsl_pm.machinfo->gpio_fatal)
960 free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);
961
962 if (sharpsl_pm.machinfo->batfull_irq)
963 free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
964
965 gpio_free(sharpsl_pm.machinfo->gpio_batlock);
966 gpio_free(sharpsl_pm.machinfo->gpio_batfull);
967 gpio_free(sharpsl_pm.machinfo->gpio_acin);
968
969 if (sharpsl_pm.machinfo->exit)
970 sharpsl_pm.machinfo->exit();
971
972 del_timer_sync(&sharpsl_pm.chrg_full_timer);
973 del_timer_sync(&sharpsl_pm.ac_timer);
974
975 return 0;
976}
977
978static struct platform_driver sharpsl_pm_driver = {
979 .probe = sharpsl_pm_probe,
980 .remove = sharpsl_pm_remove,
981 .suspend = sharpsl_pm_suspend,
982 .resume = sharpsl_pm_resume,
983 .driver = {
984 .name = "sharpsl-pm",
985 },
986};
987
988static int __devinit sharpsl_pm_init(void)
989{
990 return platform_driver_register(&sharpsl_pm_driver);
991}
992
993static void sharpsl_pm_exit(void)
994{
995 platform_driver_unregister(&sharpsl_pm_driver);
996}
997
998late_initcall(sharpsl_pm_init);
999module_exit(sharpsl_pm_exit);