Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 Keyspan USB to Serial Converter driver
4
5 (C) Copyright (C) 2000-2001 Hugh Blemings <hugh@blemings.org>
6 (C) Copyright (C) 2002 Greg Kroah-Hartman <greg@kroah.com>
7
8 See http://blemings.org/hugh/keyspan.html for more information.
9
10 Code in this driver inspired by and in a number of places taken
11 from Brian Warner's original Keyspan-PDA driver.
12
13 This driver has been put together with the support of Innosys, Inc.
14 and Keyspan, Inc the manufacturers of the Keyspan USB-serial products.
15 Thanks Guys :)
16
17 Thanks to Paulus for miscellaneous tidy ups, some largish chunks
18 of much nicer and/or completely new code and (perhaps most uniquely)
19 having the patience to sit down and explain why and where he'd changed
20 stuff.
21
22 Tip 'o the hat to IBM (and previously Linuxcare :) for supporting
23 staff in their work on open source projects.
24*/
25
26
27#include <linux/kernel.h>
28#include <linux/jiffies.h>
29#include <linux/errno.h>
30#include <linux/slab.h>
31#include <linux/tty.h>
32#include <linux/tty_driver.h>
33#include <linux/tty_flip.h>
34#include <linux/module.h>
35#include <linux/spinlock.h>
36#include <linux/uaccess.h>
37#include <linux/usb.h>
38#include <linux/usb/serial.h>
39#include <linux/usb/ezusb.h>
40
41#define DRIVER_AUTHOR "Hugh Blemings <hugh@misc.nu"
42#define DRIVER_DESC "Keyspan USB to Serial Converter Driver"
43
44/* Function prototypes for Keyspan serial converter */
45static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port);
46static void keyspan_close(struct usb_serial_port *port);
47static void keyspan_dtr_rts(struct usb_serial_port *port, int on);
48static int keyspan_startup(struct usb_serial *serial);
49static void keyspan_disconnect(struct usb_serial *serial);
50static void keyspan_release(struct usb_serial *serial);
51static int keyspan_port_probe(struct usb_serial_port *port);
52static int keyspan_port_remove(struct usb_serial_port *port);
53static int keyspan_write_room(struct tty_struct *tty);
54static int keyspan_write(struct tty_struct *tty, struct usb_serial_port *port,
55 const unsigned char *buf, int count);
56static void keyspan_send_setup(struct usb_serial_port *port, int reset_port);
57static void keyspan_set_termios(struct tty_struct *tty,
58 struct usb_serial_port *port,
59 struct ktermios *old);
60static void keyspan_break_ctl(struct tty_struct *tty, int break_state);
61static int keyspan_tiocmget(struct tty_struct *tty);
62static int keyspan_tiocmset(struct tty_struct *tty, unsigned int set,
63 unsigned int clear);
64static int keyspan_fake_startup(struct usb_serial *serial);
65
66static int keyspan_usa19_calc_baud(struct usb_serial_port *port,
67 u32 baud_rate, u32 baudclk,
68 u8 *rate_hi, u8 *rate_low,
69 u8 *prescaler, int portnum);
70static int keyspan_usa19w_calc_baud(struct usb_serial_port *port,
71 u32 baud_rate, u32 baudclk,
72 u8 *rate_hi, u8 *rate_low,
73 u8 *prescaler, int portnum);
74static int keyspan_usa28_calc_baud(struct usb_serial_port *port,
75 u32 baud_rate, u32 baudclk,
76 u8 *rate_hi, u8 *rate_low,
77 u8 *prescaler, int portnum);
78static int keyspan_usa19hs_calc_baud(struct usb_serial_port *port,
79 u32 baud_rate, u32 baudclk,
80 u8 *rate_hi, u8 *rate_low,
81 u8 *prescaler, int portnum);
82
83static int keyspan_usa28_send_setup(struct usb_serial *serial,
84 struct usb_serial_port *port,
85 int reset_port);
86static int keyspan_usa26_send_setup(struct usb_serial *serial,
87 struct usb_serial_port *port,
88 int reset_port);
89static int keyspan_usa49_send_setup(struct usb_serial *serial,
90 struct usb_serial_port *port,
91 int reset_port);
92static int keyspan_usa90_send_setup(struct usb_serial *serial,
93 struct usb_serial_port *port,
94 int reset_port);
95static int keyspan_usa67_send_setup(struct usb_serial *serial,
96 struct usb_serial_port *port,
97 int reset_port);
98
99/* Values used for baud rate calculation - device specific */
100#define KEYSPAN_INVALID_BAUD_RATE (-1)
101#define KEYSPAN_BAUD_RATE_OK (0)
102#define KEYSPAN_USA18X_BAUDCLK (12000000L) /* a guess */
103#define KEYSPAN_USA19_BAUDCLK (12000000L)
104#define KEYSPAN_USA19W_BAUDCLK (24000000L)
105#define KEYSPAN_USA19HS_BAUDCLK (14769231L)
106#define KEYSPAN_USA28_BAUDCLK (1843200L)
107#define KEYSPAN_USA28X_BAUDCLK (12000000L)
108#define KEYSPAN_USA49W_BAUDCLK (48000000L)
109
110/* Some constants used to characterise each device. */
111#define KEYSPAN_MAX_NUM_PORTS (4)
112#define KEYSPAN_MAX_FLIPS (2)
113
114/*
115 * Device info for the Keyspan serial converter, used by the overall
116 * usb-serial probe function.
117 */
118#define KEYSPAN_VENDOR_ID (0x06cd)
119
120/* Product IDs for the products supported, pre-renumeration */
121#define keyspan_usa18x_pre_product_id 0x0105
122#define keyspan_usa19_pre_product_id 0x0103
123#define keyspan_usa19qi_pre_product_id 0x010b
124#define keyspan_mpr_pre_product_id 0x011b
125#define keyspan_usa19qw_pre_product_id 0x0118
126#define keyspan_usa19w_pre_product_id 0x0106
127#define keyspan_usa28_pre_product_id 0x0101
128#define keyspan_usa28x_pre_product_id 0x0102
129#define keyspan_usa28xa_pre_product_id 0x0114
130#define keyspan_usa28xb_pre_product_id 0x0113
131#define keyspan_usa49w_pre_product_id 0x0109
132#define keyspan_usa49wlc_pre_product_id 0x011a
133
134/*
135 * Product IDs post-renumeration. Note that the 28x and 28xb have the same
136 * id's post-renumeration but behave identically so it's not an issue. As
137 * such, the 28xb is not listed in any of the device tables.
138 */
139#define keyspan_usa18x_product_id 0x0112
140#define keyspan_usa19_product_id 0x0107
141#define keyspan_usa19qi_product_id 0x010c
142#define keyspan_usa19hs_product_id 0x0121
143#define keyspan_mpr_product_id 0x011c
144#define keyspan_usa19qw_product_id 0x0119
145#define keyspan_usa19w_product_id 0x0108
146#define keyspan_usa28_product_id 0x010f
147#define keyspan_usa28x_product_id 0x0110
148#define keyspan_usa28xa_product_id 0x0115
149#define keyspan_usa28xb_product_id 0x0110
150#define keyspan_usa28xg_product_id 0x0135
151#define keyspan_usa49w_product_id 0x010a
152#define keyspan_usa49wlc_product_id 0x012a
153#define keyspan_usa49wg_product_id 0x0131
154
155struct keyspan_device_details {
156 /* product ID value */
157 int product_id;
158
159 enum {msg_usa26, msg_usa28, msg_usa49, msg_usa90, msg_usa67} msg_format;
160
161 /* Number of physical ports */
162 int num_ports;
163
164 /* 1 if endpoint flipping used on input, 0 if not */
165 int indat_endp_flip;
166
167 /* 1 if endpoint flipping used on output, 0 if not */
168 int outdat_endp_flip;
169
170 /*
171 * Table mapping input data endpoint IDs to physical port
172 * number and flip if used
173 */
174 int indat_endpoints[KEYSPAN_MAX_NUM_PORTS];
175
176 /* Same for output endpoints */
177 int outdat_endpoints[KEYSPAN_MAX_NUM_PORTS];
178
179 /* Input acknowledge endpoints */
180 int inack_endpoints[KEYSPAN_MAX_NUM_PORTS];
181
182 /* Output control endpoints */
183 int outcont_endpoints[KEYSPAN_MAX_NUM_PORTS];
184
185 /* Endpoint used for input status */
186 int instat_endpoint;
187
188 /* Endpoint used for input data 49WG only */
189 int indat_endpoint;
190
191 /* Endpoint used for global control functions */
192 int glocont_endpoint;
193
194 int (*calculate_baud_rate)(struct usb_serial_port *port,
195 u32 baud_rate, u32 baudclk,
196 u8 *rate_hi, u8 *rate_low, u8 *prescaler,
197 int portnum);
198 u32 baudclk;
199};
200
201/*
202 * Now for each device type we setup the device detail structure with the
203 * appropriate information (provided in Keyspan's documentation)
204 */
205
206static const struct keyspan_device_details usa18x_device_details = {
207 .product_id = keyspan_usa18x_product_id,
208 .msg_format = msg_usa26,
209 .num_ports = 1,
210 .indat_endp_flip = 0,
211 .outdat_endp_flip = 1,
212 .indat_endpoints = {0x81},
213 .outdat_endpoints = {0x01},
214 .inack_endpoints = {0x85},
215 .outcont_endpoints = {0x05},
216 .instat_endpoint = 0x87,
217 .indat_endpoint = -1,
218 .glocont_endpoint = 0x07,
219 .calculate_baud_rate = keyspan_usa19w_calc_baud,
220 .baudclk = KEYSPAN_USA18X_BAUDCLK,
221};
222
223static const struct keyspan_device_details usa19_device_details = {
224 .product_id = keyspan_usa19_product_id,
225 .msg_format = msg_usa28,
226 .num_ports = 1,
227 .indat_endp_flip = 1,
228 .outdat_endp_flip = 1,
229 .indat_endpoints = {0x81},
230 .outdat_endpoints = {0x01},
231 .inack_endpoints = {0x83},
232 .outcont_endpoints = {0x03},
233 .instat_endpoint = 0x84,
234 .indat_endpoint = -1,
235 .glocont_endpoint = -1,
236 .calculate_baud_rate = keyspan_usa19_calc_baud,
237 .baudclk = KEYSPAN_USA19_BAUDCLK,
238};
239
240static const struct keyspan_device_details usa19qi_device_details = {
241 .product_id = keyspan_usa19qi_product_id,
242 .msg_format = msg_usa28,
243 .num_ports = 1,
244 .indat_endp_flip = 1,
245 .outdat_endp_flip = 1,
246 .indat_endpoints = {0x81},
247 .outdat_endpoints = {0x01},
248 .inack_endpoints = {0x83},
249 .outcont_endpoints = {0x03},
250 .instat_endpoint = 0x84,
251 .indat_endpoint = -1,
252 .glocont_endpoint = -1,
253 .calculate_baud_rate = keyspan_usa28_calc_baud,
254 .baudclk = KEYSPAN_USA19_BAUDCLK,
255};
256
257static const struct keyspan_device_details mpr_device_details = {
258 .product_id = keyspan_mpr_product_id,
259 .msg_format = msg_usa28,
260 .num_ports = 1,
261 .indat_endp_flip = 1,
262 .outdat_endp_flip = 1,
263 .indat_endpoints = {0x81},
264 .outdat_endpoints = {0x01},
265 .inack_endpoints = {0x83},
266 .outcont_endpoints = {0x03},
267 .instat_endpoint = 0x84,
268 .indat_endpoint = -1,
269 .glocont_endpoint = -1,
270 .calculate_baud_rate = keyspan_usa28_calc_baud,
271 .baudclk = KEYSPAN_USA19_BAUDCLK,
272};
273
274static const struct keyspan_device_details usa19qw_device_details = {
275 .product_id = keyspan_usa19qw_product_id,
276 .msg_format = msg_usa26,
277 .num_ports = 1,
278 .indat_endp_flip = 0,
279 .outdat_endp_flip = 1,
280 .indat_endpoints = {0x81},
281 .outdat_endpoints = {0x01},
282 .inack_endpoints = {0x85},
283 .outcont_endpoints = {0x05},
284 .instat_endpoint = 0x87,
285 .indat_endpoint = -1,
286 .glocont_endpoint = 0x07,
287 .calculate_baud_rate = keyspan_usa19w_calc_baud,
288 .baudclk = KEYSPAN_USA19W_BAUDCLK,
289};
290
291static const struct keyspan_device_details usa19w_device_details = {
292 .product_id = keyspan_usa19w_product_id,
293 .msg_format = msg_usa26,
294 .num_ports = 1,
295 .indat_endp_flip = 0,
296 .outdat_endp_flip = 1,
297 .indat_endpoints = {0x81},
298 .outdat_endpoints = {0x01},
299 .inack_endpoints = {0x85},
300 .outcont_endpoints = {0x05},
301 .instat_endpoint = 0x87,
302 .indat_endpoint = -1,
303 .glocont_endpoint = 0x07,
304 .calculate_baud_rate = keyspan_usa19w_calc_baud,
305 .baudclk = KEYSPAN_USA19W_BAUDCLK,
306};
307
308static const struct keyspan_device_details usa19hs_device_details = {
309 .product_id = keyspan_usa19hs_product_id,
310 .msg_format = msg_usa90,
311 .num_ports = 1,
312 .indat_endp_flip = 0,
313 .outdat_endp_flip = 0,
314 .indat_endpoints = {0x81},
315 .outdat_endpoints = {0x01},
316 .inack_endpoints = {-1},
317 .outcont_endpoints = {0x02},
318 .instat_endpoint = 0x82,
319 .indat_endpoint = -1,
320 .glocont_endpoint = -1,
321 .calculate_baud_rate = keyspan_usa19hs_calc_baud,
322 .baudclk = KEYSPAN_USA19HS_BAUDCLK,
323};
324
325static const struct keyspan_device_details usa28_device_details = {
326 .product_id = keyspan_usa28_product_id,
327 .msg_format = msg_usa28,
328 .num_ports = 2,
329 .indat_endp_flip = 1,
330 .outdat_endp_flip = 1,
331 .indat_endpoints = {0x81, 0x83},
332 .outdat_endpoints = {0x01, 0x03},
333 .inack_endpoints = {0x85, 0x86},
334 .outcont_endpoints = {0x05, 0x06},
335 .instat_endpoint = 0x87,
336 .indat_endpoint = -1,
337 .glocont_endpoint = 0x07,
338 .calculate_baud_rate = keyspan_usa28_calc_baud,
339 .baudclk = KEYSPAN_USA28_BAUDCLK,
340};
341
342static const struct keyspan_device_details usa28x_device_details = {
343 .product_id = keyspan_usa28x_product_id,
344 .msg_format = msg_usa26,
345 .num_ports = 2,
346 .indat_endp_flip = 0,
347 .outdat_endp_flip = 1,
348 .indat_endpoints = {0x81, 0x83},
349 .outdat_endpoints = {0x01, 0x03},
350 .inack_endpoints = {0x85, 0x86},
351 .outcont_endpoints = {0x05, 0x06},
352 .instat_endpoint = 0x87,
353 .indat_endpoint = -1,
354 .glocont_endpoint = 0x07,
355 .calculate_baud_rate = keyspan_usa19w_calc_baud,
356 .baudclk = KEYSPAN_USA28X_BAUDCLK,
357};
358
359static const struct keyspan_device_details usa28xa_device_details = {
360 .product_id = keyspan_usa28xa_product_id,
361 .msg_format = msg_usa26,
362 .num_ports = 2,
363 .indat_endp_flip = 0,
364 .outdat_endp_flip = 1,
365 .indat_endpoints = {0x81, 0x83},
366 .outdat_endpoints = {0x01, 0x03},
367 .inack_endpoints = {0x85, 0x86},
368 .outcont_endpoints = {0x05, 0x06},
369 .instat_endpoint = 0x87,
370 .indat_endpoint = -1,
371 .glocont_endpoint = 0x07,
372 .calculate_baud_rate = keyspan_usa19w_calc_baud,
373 .baudclk = KEYSPAN_USA28X_BAUDCLK,
374};
375
376static const struct keyspan_device_details usa28xg_device_details = {
377 .product_id = keyspan_usa28xg_product_id,
378 .msg_format = msg_usa67,
379 .num_ports = 2,
380 .indat_endp_flip = 0,
381 .outdat_endp_flip = 0,
382 .indat_endpoints = {0x84, 0x88},
383 .outdat_endpoints = {0x02, 0x06},
384 .inack_endpoints = {-1, -1},
385 .outcont_endpoints = {-1, -1},
386 .instat_endpoint = 0x81,
387 .indat_endpoint = -1,
388 .glocont_endpoint = 0x01,
389 .calculate_baud_rate = keyspan_usa19w_calc_baud,
390 .baudclk = KEYSPAN_USA28X_BAUDCLK,
391};
392/*
393 * We don't need a separate entry for the usa28xb as it appears as a 28x
394 * anyway.
395 */
396
397static const struct keyspan_device_details usa49w_device_details = {
398 .product_id = keyspan_usa49w_product_id,
399 .msg_format = msg_usa49,
400 .num_ports = 4,
401 .indat_endp_flip = 0,
402 .outdat_endp_flip = 0,
403 .indat_endpoints = {0x81, 0x82, 0x83, 0x84},
404 .outdat_endpoints = {0x01, 0x02, 0x03, 0x04},
405 .inack_endpoints = {-1, -1, -1, -1},
406 .outcont_endpoints = {-1, -1, -1, -1},
407 .instat_endpoint = 0x87,
408 .indat_endpoint = -1,
409 .glocont_endpoint = 0x07,
410 .calculate_baud_rate = keyspan_usa19w_calc_baud,
411 .baudclk = KEYSPAN_USA49W_BAUDCLK,
412};
413
414static const struct keyspan_device_details usa49wlc_device_details = {
415 .product_id = keyspan_usa49wlc_product_id,
416 .msg_format = msg_usa49,
417 .num_ports = 4,
418 .indat_endp_flip = 0,
419 .outdat_endp_flip = 0,
420 .indat_endpoints = {0x81, 0x82, 0x83, 0x84},
421 .outdat_endpoints = {0x01, 0x02, 0x03, 0x04},
422 .inack_endpoints = {-1, -1, -1, -1},
423 .outcont_endpoints = {-1, -1, -1, -1},
424 .instat_endpoint = 0x87,
425 .indat_endpoint = -1,
426 .glocont_endpoint = 0x07,
427 .calculate_baud_rate = keyspan_usa19w_calc_baud,
428 .baudclk = KEYSPAN_USA19W_BAUDCLK,
429};
430
431static const struct keyspan_device_details usa49wg_device_details = {
432 .product_id = keyspan_usa49wg_product_id,
433 .msg_format = msg_usa49,
434 .num_ports = 4,
435 .indat_endp_flip = 0,
436 .outdat_endp_flip = 0,
437 .indat_endpoints = {-1, -1, -1, -1}, /* single 'global' data in EP */
438 .outdat_endpoints = {0x01, 0x02, 0x04, 0x06},
439 .inack_endpoints = {-1, -1, -1, -1},
440 .outcont_endpoints = {-1, -1, -1, -1},
441 .instat_endpoint = 0x81,
442 .indat_endpoint = 0x88,
443 .glocont_endpoint = 0x00, /* uses control EP */
444 .calculate_baud_rate = keyspan_usa19w_calc_baud,
445 .baudclk = KEYSPAN_USA19W_BAUDCLK,
446};
447
448static const struct keyspan_device_details *keyspan_devices[] = {
449 &usa18x_device_details,
450 &usa19_device_details,
451 &usa19qi_device_details,
452 &mpr_device_details,
453 &usa19qw_device_details,
454 &usa19w_device_details,
455 &usa19hs_device_details,
456 &usa28_device_details,
457 &usa28x_device_details,
458 &usa28xa_device_details,
459 &usa28xg_device_details,
460 /* 28xb not required as it renumerates as a 28x */
461 &usa49w_device_details,
462 &usa49wlc_device_details,
463 &usa49wg_device_details,
464 NULL,
465};
466
467static const struct usb_device_id keyspan_ids_combined[] = {
468 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) },
469 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) },
470 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) },
471 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) },
472 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_pre_product_id) },
473 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_pre_product_id) },
474 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_pre_product_id) },
475 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_pre_product_id) },
476 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_pre_product_id) },
477 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_pre_product_id) },
478 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_pre_product_id) },
479 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_pre_product_id) },
480 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) },
481 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) },
482 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_product_id) },
483 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) },
484 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_product_id) },
485 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19hs_product_id) },
486 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_product_id) },
487 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
488 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
489 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
490 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) },
491 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id)},
492 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
493 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)},
494 { } /* Terminating entry */
495};
496
497MODULE_DEVICE_TABLE(usb, keyspan_ids_combined);
498
499/* usb_device_id table for the pre-firmware download keyspan devices */
500static const struct usb_device_id keyspan_pre_ids[] = {
501 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) },
502 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) },
503 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) },
504 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_pre_product_id) },
505 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) },
506 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_pre_product_id) },
507 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_pre_product_id) },
508 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_pre_product_id) },
509 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_pre_product_id) },
510 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_pre_product_id) },
511 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_pre_product_id) },
512 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_pre_product_id) },
513 { } /* Terminating entry */
514};
515
516static const struct usb_device_id keyspan_1port_ids[] = {
517 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) },
518 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) },
519 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) },
520 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_product_id) },
521 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_product_id) },
522 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19hs_product_id) },
523 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_product_id) },
524 { } /* Terminating entry */
525};
526
527static const struct usb_device_id keyspan_2port_ids[] = {
528 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
529 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
530 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
531 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) },
532 { } /* Terminating entry */
533};
534
535static const struct usb_device_id keyspan_4port_ids[] = {
536 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id) },
537 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
538 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)},
539 { } /* Terminating entry */
540};
541
542#define INSTAT_BUFLEN 32
543#define GLOCONT_BUFLEN 64
544#define INDAT49W_BUFLEN 512
545#define IN_BUFLEN 64
546#define OUT_BUFLEN 64
547#define INACK_BUFLEN 1
548#define OUTCONT_BUFLEN 64
549
550 /* Per device and per port private data */
551struct keyspan_serial_private {
552 const struct keyspan_device_details *device_details;
553
554 struct urb *instat_urb;
555 char *instat_buf;
556
557 /* added to support 49wg, where data from all 4 ports comes in
558 on 1 EP and high-speed supported */
559 struct urb *indat_urb;
560 char *indat_buf;
561
562 /* XXX this one probably will need a lock */
563 struct urb *glocont_urb;
564 char *glocont_buf;
565 char *ctrl_buf; /* for EP0 control message */
566};
567
568struct keyspan_port_private {
569 /* Keep track of which input & output endpoints to use */
570 int in_flip;
571 int out_flip;
572
573 /* Keep duplicate of device details in each port
574 structure as well - simplifies some of the
575 callback functions etc. */
576 const struct keyspan_device_details *device_details;
577
578 /* Input endpoints and buffer for this port */
579 struct urb *in_urbs[2];
580 char *in_buffer[2];
581 /* Output endpoints and buffer for this port */
582 struct urb *out_urbs[2];
583 char *out_buffer[2];
584
585 /* Input ack endpoint */
586 struct urb *inack_urb;
587 char *inack_buffer;
588
589 /* Output control endpoint */
590 struct urb *outcont_urb;
591 char *outcont_buffer;
592
593 /* Settings for the port */
594 int baud;
595 int old_baud;
596 unsigned int cflag;
597 unsigned int old_cflag;
598 enum {flow_none, flow_cts, flow_xon} flow_control;
599 int rts_state; /* Handshaking pins (outputs) */
600 int dtr_state;
601 int cts_state; /* Handshaking pins (inputs) */
602 int dsr_state;
603 int dcd_state;
604 int ri_state;
605 int break_on;
606
607 unsigned long tx_start_time[2];
608 int resend_cont; /* need to resend control packet */
609};
610
611/* Include Keyspan message headers. All current Keyspan Adapters
612 make use of one of five message formats which are referred
613 to as USA-26, USA-28, USA-49, USA-90, USA-67 by Keyspan and
614 within this driver. */
615#include "keyspan_usa26msg.h"
616#include "keyspan_usa28msg.h"
617#include "keyspan_usa49msg.h"
618#include "keyspan_usa90msg.h"
619#include "keyspan_usa67msg.h"
620
621
622static void keyspan_break_ctl(struct tty_struct *tty, int break_state)
623{
624 struct usb_serial_port *port = tty->driver_data;
625 struct keyspan_port_private *p_priv;
626
627 p_priv = usb_get_serial_port_data(port);
628
629 if (break_state == -1)
630 p_priv->break_on = 1;
631 else
632 p_priv->break_on = 0;
633
634 keyspan_send_setup(port, 0);
635}
636
637
638static void keyspan_set_termios(struct tty_struct *tty,
639 struct usb_serial_port *port, struct ktermios *old_termios)
640{
641 int baud_rate, device_port;
642 struct keyspan_port_private *p_priv;
643 const struct keyspan_device_details *d_details;
644 unsigned int cflag;
645
646 p_priv = usb_get_serial_port_data(port);
647 d_details = p_priv->device_details;
648 cflag = tty->termios.c_cflag;
649 device_port = port->port_number;
650
651 /* Baud rate calculation takes baud rate as an integer
652 so other rates can be generated if desired. */
653 baud_rate = tty_get_baud_rate(tty);
654 /* If no match or invalid, don't change */
655 if (d_details->calculate_baud_rate(port, baud_rate, d_details->baudclk,
656 NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) {
657 /* FIXME - more to do here to ensure rate changes cleanly */
658 /* FIXME - calculate exact rate from divisor ? */
659 p_priv->baud = baud_rate;
660 } else
661 baud_rate = tty_termios_baud_rate(old_termios);
662
663 tty_encode_baud_rate(tty, baud_rate, baud_rate);
664 /* set CTS/RTS handshake etc. */
665 p_priv->cflag = cflag;
666 p_priv->flow_control = (cflag & CRTSCTS) ? flow_cts : flow_none;
667
668 /* Mark/Space not supported */
669 tty->termios.c_cflag &= ~CMSPAR;
670
671 keyspan_send_setup(port, 0);
672}
673
674static int keyspan_tiocmget(struct tty_struct *tty)
675{
676 struct usb_serial_port *port = tty->driver_data;
677 struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);
678 unsigned int value;
679
680 value = ((p_priv->rts_state) ? TIOCM_RTS : 0) |
681 ((p_priv->dtr_state) ? TIOCM_DTR : 0) |
682 ((p_priv->cts_state) ? TIOCM_CTS : 0) |
683 ((p_priv->dsr_state) ? TIOCM_DSR : 0) |
684 ((p_priv->dcd_state) ? TIOCM_CAR : 0) |
685 ((p_priv->ri_state) ? TIOCM_RNG : 0);
686
687 return value;
688}
689
690static int keyspan_tiocmset(struct tty_struct *tty,
691 unsigned int set, unsigned int clear)
692{
693 struct usb_serial_port *port = tty->driver_data;
694 struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);
695
696 if (set & TIOCM_RTS)
697 p_priv->rts_state = 1;
698 if (set & TIOCM_DTR)
699 p_priv->dtr_state = 1;
700 if (clear & TIOCM_RTS)
701 p_priv->rts_state = 0;
702 if (clear & TIOCM_DTR)
703 p_priv->dtr_state = 0;
704 keyspan_send_setup(port, 0);
705 return 0;
706}
707
708/* Write function is similar for the four protocols used
709 with only a minor change for usa90 (usa19hs) required */
710static int keyspan_write(struct tty_struct *tty,
711 struct usb_serial_port *port, const unsigned char *buf, int count)
712{
713 struct keyspan_port_private *p_priv;
714 const struct keyspan_device_details *d_details;
715 int flip;
716 int left, todo;
717 struct urb *this_urb;
718 int err, maxDataLen, dataOffset;
719
720 p_priv = usb_get_serial_port_data(port);
721 d_details = p_priv->device_details;
722
723 if (d_details->msg_format == msg_usa90) {
724 maxDataLen = 64;
725 dataOffset = 0;
726 } else {
727 maxDataLen = 63;
728 dataOffset = 1;
729 }
730
731 dev_dbg(&port->dev, "%s - %d chars, flip=%d\n", __func__, count,
732 p_priv->out_flip);
733
734 for (left = count; left > 0; left -= todo) {
735 todo = left;
736 if (todo > maxDataLen)
737 todo = maxDataLen;
738
739 flip = p_priv->out_flip;
740
741 /* Check we have a valid urb/endpoint before we use it... */
742 this_urb = p_priv->out_urbs[flip];
743 if (this_urb == NULL) {
744 /* no bulk out, so return 0 bytes written */
745 dev_dbg(&port->dev, "%s - no output urb :(\n", __func__);
746 return count;
747 }
748
749 dev_dbg(&port->dev, "%s - endpoint %x flip %d\n",
750 __func__, usb_pipeendpoint(this_urb->pipe), flip);
751
752 if (this_urb->status == -EINPROGRESS) {
753 if (time_before(jiffies,
754 p_priv->tx_start_time[flip] + 10 * HZ))
755 break;
756 usb_unlink_urb(this_urb);
757 break;
758 }
759
760 /* First byte in buffer is "last flag" (except for usa19hx)
761 - unused so for now so set to zero */
762 ((char *)this_urb->transfer_buffer)[0] = 0;
763
764 memcpy(this_urb->transfer_buffer + dataOffset, buf, todo);
765 buf += todo;
766
767 /* send the data out the bulk port */
768 this_urb->transfer_buffer_length = todo + dataOffset;
769
770 err = usb_submit_urb(this_urb, GFP_ATOMIC);
771 if (err != 0)
772 dev_dbg(&port->dev, "usb_submit_urb(write bulk) failed (%d)\n", err);
773 p_priv->tx_start_time[flip] = jiffies;
774
775 /* Flip for next time if usa26 or usa28 interface
776 (not used on usa49) */
777 p_priv->out_flip = (flip + 1) & d_details->outdat_endp_flip;
778 }
779
780 return count - left;
781}
782
783static void usa26_indat_callback(struct urb *urb)
784{
785 int i, err;
786 int endpoint;
787 struct usb_serial_port *port;
788 unsigned char *data = urb->transfer_buffer;
789 int status = urb->status;
790
791 endpoint = usb_pipeendpoint(urb->pipe);
792
793 if (status) {
794 dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n",
795 __func__, status, endpoint);
796 return;
797 }
798
799 port = urb->context;
800 if (urb->actual_length) {
801 /* 0x80 bit is error flag */
802 if ((data[0] & 0x80) == 0) {
803 /* no errors on individual bytes, only
804 possible overrun err */
805 if (data[0] & RXERROR_OVERRUN) {
806 tty_insert_flip_char(&port->port, 0,
807 TTY_OVERRUN);
808 }
809 for (i = 1; i < urb->actual_length ; ++i)
810 tty_insert_flip_char(&port->port, data[i],
811 TTY_NORMAL);
812 } else {
813 /* some bytes had errors, every byte has status */
814 dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__);
815 for (i = 0; i + 1 < urb->actual_length; i += 2) {
816 int stat = data[i];
817 int flag = TTY_NORMAL;
818
819 if (stat & RXERROR_OVERRUN) {
820 tty_insert_flip_char(&port->port, 0,
821 TTY_OVERRUN);
822 }
823 /* XXX should handle break (0x10) */
824 if (stat & RXERROR_PARITY)
825 flag = TTY_PARITY;
826 else if (stat & RXERROR_FRAMING)
827 flag = TTY_FRAME;
828
829 tty_insert_flip_char(&port->port, data[i+1],
830 flag);
831 }
832 }
833 tty_flip_buffer_push(&port->port);
834 }
835
836 /* Resubmit urb so we continue receiving */
837 err = usb_submit_urb(urb, GFP_ATOMIC);
838 if (err != 0)
839 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
840}
841
842/* Outdat handling is common for all devices */
843static void usa2x_outdat_callback(struct urb *urb)
844{
845 struct usb_serial_port *port;
846 struct keyspan_port_private *p_priv;
847
848 port = urb->context;
849 p_priv = usb_get_serial_port_data(port);
850 dev_dbg(&port->dev, "%s - urb %d\n", __func__, urb == p_priv->out_urbs[1]);
851
852 usb_serial_port_softint(port);
853}
854
855static void usa26_inack_callback(struct urb *urb)
856{
857}
858
859static void usa26_outcont_callback(struct urb *urb)
860{
861 struct usb_serial_port *port;
862 struct keyspan_port_private *p_priv;
863
864 port = urb->context;
865 p_priv = usb_get_serial_port_data(port);
866
867 if (p_priv->resend_cont) {
868 dev_dbg(&port->dev, "%s - sending setup\n", __func__);
869 keyspan_usa26_send_setup(port->serial, port,
870 p_priv->resend_cont - 1);
871 }
872}
873
874static void usa26_instat_callback(struct urb *urb)
875{
876 unsigned char *data = urb->transfer_buffer;
877 struct keyspan_usa26_portStatusMessage *msg;
878 struct usb_serial *serial;
879 struct usb_serial_port *port;
880 struct keyspan_port_private *p_priv;
881 int old_dcd_state, err;
882 int status = urb->status;
883
884 serial = urb->context;
885
886 if (status) {
887 dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
888 __func__, status);
889 return;
890 }
891 if (urb->actual_length != 9) {
892 dev_dbg(&urb->dev->dev, "%s - %d byte report??\n", __func__, urb->actual_length);
893 goto exit;
894 }
895
896 msg = (struct keyspan_usa26_portStatusMessage *)data;
897
898 /* Check port number from message and retrieve private data */
899 if (msg->port >= serial->num_ports) {
900 dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port);
901 goto exit;
902 }
903 port = serial->port[msg->port];
904 p_priv = usb_get_serial_port_data(port);
905 if (!p_priv)
906 goto resubmit;
907
908 /* Update handshaking pin state information */
909 old_dcd_state = p_priv->dcd_state;
910 p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0);
911 p_priv->dsr_state = ((msg->dsr) ? 1 : 0);
912 p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0);
913 p_priv->ri_state = ((msg->ri) ? 1 : 0);
914
915 if (old_dcd_state != p_priv->dcd_state)
916 tty_port_tty_hangup(&port->port, true);
917resubmit:
918 /* Resubmit urb so we continue receiving */
919 err = usb_submit_urb(urb, GFP_ATOMIC);
920 if (err != 0)
921 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
922exit: ;
923}
924
925static void usa26_glocont_callback(struct urb *urb)
926{
927}
928
929
930static void usa28_indat_callback(struct urb *urb)
931{
932 int err;
933 struct usb_serial_port *port;
934 unsigned char *data;
935 struct keyspan_port_private *p_priv;
936 int status = urb->status;
937
938 port = urb->context;
939 p_priv = usb_get_serial_port_data(port);
940 data = urb->transfer_buffer;
941
942 if (urb != p_priv->in_urbs[p_priv->in_flip])
943 return;
944
945 do {
946 if (status) {
947 dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n",
948 __func__, status, usb_pipeendpoint(urb->pipe));
949 return;
950 }
951
952 port = urb->context;
953 p_priv = usb_get_serial_port_data(port);
954 data = urb->transfer_buffer;
955
956 if (urb->actual_length) {
957 tty_insert_flip_string(&port->port, data,
958 urb->actual_length);
959 tty_flip_buffer_push(&port->port);
960 }
961
962 /* Resubmit urb so we continue receiving */
963 err = usb_submit_urb(urb, GFP_ATOMIC);
964 if (err != 0)
965 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n",
966 __func__, err);
967 p_priv->in_flip ^= 1;
968
969 urb = p_priv->in_urbs[p_priv->in_flip];
970 } while (urb->status != -EINPROGRESS);
971}
972
973static void usa28_inack_callback(struct urb *urb)
974{
975}
976
977static void usa28_outcont_callback(struct urb *urb)
978{
979 struct usb_serial_port *port;
980 struct keyspan_port_private *p_priv;
981
982 port = urb->context;
983 p_priv = usb_get_serial_port_data(port);
984
985 if (p_priv->resend_cont) {
986 dev_dbg(&port->dev, "%s - sending setup\n", __func__);
987 keyspan_usa28_send_setup(port->serial, port,
988 p_priv->resend_cont - 1);
989 }
990}
991
992static void usa28_instat_callback(struct urb *urb)
993{
994 int err;
995 unsigned char *data = urb->transfer_buffer;
996 struct keyspan_usa28_portStatusMessage *msg;
997 struct usb_serial *serial;
998 struct usb_serial_port *port;
999 struct keyspan_port_private *p_priv;
1000 int old_dcd_state;
1001 int status = urb->status;
1002
1003 serial = urb->context;
1004
1005 if (status) {
1006 dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
1007 __func__, status);
1008 return;
1009 }
1010
1011 if (urb->actual_length != sizeof(struct keyspan_usa28_portStatusMessage)) {
1012 dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length);
1013 goto exit;
1014 }
1015
1016 msg = (struct keyspan_usa28_portStatusMessage *)data;
1017
1018 /* Check port number from message and retrieve private data */
1019 if (msg->port >= serial->num_ports) {
1020 dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port);
1021 goto exit;
1022 }
1023 port = serial->port[msg->port];
1024 p_priv = usb_get_serial_port_data(port);
1025 if (!p_priv)
1026 goto resubmit;
1027
1028 /* Update handshaking pin state information */
1029 old_dcd_state = p_priv->dcd_state;
1030 p_priv->cts_state = ((msg->cts) ? 1 : 0);
1031 p_priv->dsr_state = ((msg->dsr) ? 1 : 0);
1032 p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
1033 p_priv->ri_state = ((msg->ri) ? 1 : 0);
1034
1035 if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
1036 tty_port_tty_hangup(&port->port, true);
1037resubmit:
1038 /* Resubmit urb so we continue receiving */
1039 err = usb_submit_urb(urb, GFP_ATOMIC);
1040 if (err != 0)
1041 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
1042exit: ;
1043}
1044
1045static void usa28_glocont_callback(struct urb *urb)
1046{
1047}
1048
1049
1050static void usa49_glocont_callback(struct urb *urb)
1051{
1052 struct usb_serial *serial;
1053 struct usb_serial_port *port;
1054 struct keyspan_port_private *p_priv;
1055 int i;
1056
1057 serial = urb->context;
1058 for (i = 0; i < serial->num_ports; ++i) {
1059 port = serial->port[i];
1060 p_priv = usb_get_serial_port_data(port);
1061 if (!p_priv)
1062 continue;
1063
1064 if (p_priv->resend_cont) {
1065 dev_dbg(&port->dev, "%s - sending setup\n", __func__);
1066 keyspan_usa49_send_setup(serial, port,
1067 p_priv->resend_cont - 1);
1068 break;
1069 }
1070 }
1071}
1072
1073 /* This is actually called glostat in the Keyspan
1074 doco */
1075static void usa49_instat_callback(struct urb *urb)
1076{
1077 int err;
1078 unsigned char *data = urb->transfer_buffer;
1079 struct keyspan_usa49_portStatusMessage *msg;
1080 struct usb_serial *serial;
1081 struct usb_serial_port *port;
1082 struct keyspan_port_private *p_priv;
1083 int old_dcd_state;
1084 int status = urb->status;
1085
1086 serial = urb->context;
1087
1088 if (status) {
1089 dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
1090 __func__, status);
1091 return;
1092 }
1093
1094 if (urb->actual_length !=
1095 sizeof(struct keyspan_usa49_portStatusMessage)) {
1096 dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length);
1097 goto exit;
1098 }
1099
1100 msg = (struct keyspan_usa49_portStatusMessage *)data;
1101
1102 /* Check port number from message and retrieve private data */
1103 if (msg->portNumber >= serial->num_ports) {
1104 dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n",
1105 __func__, msg->portNumber);
1106 goto exit;
1107 }
1108 port = serial->port[msg->portNumber];
1109 p_priv = usb_get_serial_port_data(port);
1110 if (!p_priv)
1111 goto resubmit;
1112
1113 /* Update handshaking pin state information */
1114 old_dcd_state = p_priv->dcd_state;
1115 p_priv->cts_state = ((msg->cts) ? 1 : 0);
1116 p_priv->dsr_state = ((msg->dsr) ? 1 : 0);
1117 p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
1118 p_priv->ri_state = ((msg->ri) ? 1 : 0);
1119
1120 if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
1121 tty_port_tty_hangup(&port->port, true);
1122resubmit:
1123 /* Resubmit urb so we continue receiving */
1124 err = usb_submit_urb(urb, GFP_ATOMIC);
1125 if (err != 0)
1126 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
1127exit: ;
1128}
1129
1130static void usa49_inack_callback(struct urb *urb)
1131{
1132}
1133
1134static void usa49_indat_callback(struct urb *urb)
1135{
1136 int i, err;
1137 int endpoint;
1138 struct usb_serial_port *port;
1139 unsigned char *data = urb->transfer_buffer;
1140 int status = urb->status;
1141
1142 endpoint = usb_pipeendpoint(urb->pipe);
1143
1144 if (status) {
1145 dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n",
1146 __func__, status, endpoint);
1147 return;
1148 }
1149
1150 port = urb->context;
1151 if (urb->actual_length) {
1152 /* 0x80 bit is error flag */
1153 if ((data[0] & 0x80) == 0) {
1154 /* no error on any byte */
1155 tty_insert_flip_string(&port->port, data + 1,
1156 urb->actual_length - 1);
1157 } else {
1158 /* some bytes had errors, every byte has status */
1159 for (i = 0; i + 1 < urb->actual_length; i += 2) {
1160 int stat = data[i];
1161 int flag = TTY_NORMAL;
1162
1163 if (stat & RXERROR_OVERRUN) {
1164 tty_insert_flip_char(&port->port, 0,
1165 TTY_OVERRUN);
1166 }
1167 /* XXX should handle break (0x10) */
1168 if (stat & RXERROR_PARITY)
1169 flag = TTY_PARITY;
1170 else if (stat & RXERROR_FRAMING)
1171 flag = TTY_FRAME;
1172
1173 tty_insert_flip_char(&port->port, data[i+1],
1174 flag);
1175 }
1176 }
1177 tty_flip_buffer_push(&port->port);
1178 }
1179
1180 /* Resubmit urb so we continue receiving */
1181 err = usb_submit_urb(urb, GFP_ATOMIC);
1182 if (err != 0)
1183 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
1184}
1185
1186static void usa49wg_indat_callback(struct urb *urb)
1187{
1188 int i, len, x, err;
1189 struct usb_serial *serial;
1190 struct usb_serial_port *port;
1191 unsigned char *data = urb->transfer_buffer;
1192 int status = urb->status;
1193
1194 serial = urb->context;
1195
1196 if (status) {
1197 dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
1198 __func__, status);
1199 return;
1200 }
1201
1202 /* inbound data is in the form P#, len, status, data */
1203 i = 0;
1204 len = 0;
1205
1206 while (i < urb->actual_length) {
1207
1208 /* Check port number from message */
1209 if (data[i] >= serial->num_ports) {
1210 dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n",
1211 __func__, data[i]);
1212 return;
1213 }
1214 port = serial->port[data[i++]];
1215 len = data[i++];
1216
1217 /* 0x80 bit is error flag */
1218 if ((data[i] & 0x80) == 0) {
1219 /* no error on any byte */
1220 i++;
1221 for (x = 1; x < len && i < urb->actual_length; ++x)
1222 tty_insert_flip_char(&port->port,
1223 data[i++], 0);
1224 } else {
1225 /*
1226 * some bytes had errors, every byte has status
1227 */
1228 for (x = 0; x + 1 < len &&
1229 i + 1 < urb->actual_length; x += 2) {
1230 int stat = data[i];
1231 int flag = TTY_NORMAL;
1232
1233 if (stat & RXERROR_OVERRUN) {
1234 tty_insert_flip_char(&port->port, 0,
1235 TTY_OVERRUN);
1236 }
1237 /* XXX should handle break (0x10) */
1238 if (stat & RXERROR_PARITY)
1239 flag = TTY_PARITY;
1240 else if (stat & RXERROR_FRAMING)
1241 flag = TTY_FRAME;
1242
1243 tty_insert_flip_char(&port->port, data[i+1],
1244 flag);
1245 i += 2;
1246 }
1247 }
1248 tty_flip_buffer_push(&port->port);
1249 }
1250
1251 /* Resubmit urb so we continue receiving */
1252 err = usb_submit_urb(urb, GFP_ATOMIC);
1253 if (err != 0)
1254 dev_dbg(&urb->dev->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
1255}
1256
1257/* not used, usa-49 doesn't have per-port control endpoints */
1258static void usa49_outcont_callback(struct urb *urb)
1259{
1260}
1261
1262static void usa90_indat_callback(struct urb *urb)
1263{
1264 int i, err;
1265 int endpoint;
1266 struct usb_serial_port *port;
1267 struct keyspan_port_private *p_priv;
1268 unsigned char *data = urb->transfer_buffer;
1269 int status = urb->status;
1270
1271 endpoint = usb_pipeendpoint(urb->pipe);
1272
1273 if (status) {
1274 dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n",
1275 __func__, status, endpoint);
1276 return;
1277 }
1278
1279 port = urb->context;
1280 p_priv = usb_get_serial_port_data(port);
1281
1282 if (urb->actual_length) {
1283 /* if current mode is DMA, looks like usa28 format
1284 otherwise looks like usa26 data format */
1285
1286 if (p_priv->baud > 57600)
1287 tty_insert_flip_string(&port->port, data,
1288 urb->actual_length);
1289 else {
1290 /* 0x80 bit is error flag */
1291 if ((data[0] & 0x80) == 0) {
1292 /* no errors on individual bytes, only
1293 possible overrun err*/
1294 if (data[0] & RXERROR_OVERRUN) {
1295 tty_insert_flip_char(&port->port, 0,
1296 TTY_OVERRUN);
1297 }
1298 for (i = 1; i < urb->actual_length ; ++i)
1299 tty_insert_flip_char(&port->port,
1300 data[i], TTY_NORMAL);
1301 } else {
1302 /* some bytes had errors, every byte has status */
1303 dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__);
1304 for (i = 0; i + 1 < urb->actual_length; i += 2) {
1305 int stat = data[i];
1306 int flag = TTY_NORMAL;
1307
1308 if (stat & RXERROR_OVERRUN) {
1309 tty_insert_flip_char(
1310 &port->port, 0,
1311 TTY_OVERRUN);
1312 }
1313 /* XXX should handle break (0x10) */
1314 if (stat & RXERROR_PARITY)
1315 flag = TTY_PARITY;
1316 else if (stat & RXERROR_FRAMING)
1317 flag = TTY_FRAME;
1318
1319 tty_insert_flip_char(&port->port,
1320 data[i+1], flag);
1321 }
1322 }
1323 }
1324 tty_flip_buffer_push(&port->port);
1325 }
1326
1327 /* Resubmit urb so we continue receiving */
1328 err = usb_submit_urb(urb, GFP_ATOMIC);
1329 if (err != 0)
1330 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
1331}
1332
1333
1334static void usa90_instat_callback(struct urb *urb)
1335{
1336 unsigned char *data = urb->transfer_buffer;
1337 struct keyspan_usa90_portStatusMessage *msg;
1338 struct usb_serial *serial;
1339 struct usb_serial_port *port;
1340 struct keyspan_port_private *p_priv;
1341 int old_dcd_state, err;
1342 int status = urb->status;
1343
1344 serial = urb->context;
1345
1346 if (status) {
1347 dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
1348 __func__, status);
1349 return;
1350 }
1351 if (urb->actual_length < 14) {
1352 dev_dbg(&urb->dev->dev, "%s - %d byte report??\n", __func__, urb->actual_length);
1353 goto exit;
1354 }
1355
1356 msg = (struct keyspan_usa90_portStatusMessage *)data;
1357
1358 /* Now do something useful with the data */
1359
1360 port = serial->port[0];
1361 p_priv = usb_get_serial_port_data(port);
1362 if (!p_priv)
1363 goto resubmit;
1364
1365 /* Update handshaking pin state information */
1366 old_dcd_state = p_priv->dcd_state;
1367 p_priv->cts_state = ((msg->cts) ? 1 : 0);
1368 p_priv->dsr_state = ((msg->dsr) ? 1 : 0);
1369 p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
1370 p_priv->ri_state = ((msg->ri) ? 1 : 0);
1371
1372 if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
1373 tty_port_tty_hangup(&port->port, true);
1374resubmit:
1375 /* Resubmit urb so we continue receiving */
1376 err = usb_submit_urb(urb, GFP_ATOMIC);
1377 if (err != 0)
1378 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
1379exit:
1380 ;
1381}
1382
1383static void usa90_outcont_callback(struct urb *urb)
1384{
1385 struct usb_serial_port *port;
1386 struct keyspan_port_private *p_priv;
1387
1388 port = urb->context;
1389 p_priv = usb_get_serial_port_data(port);
1390
1391 if (p_priv->resend_cont) {
1392 dev_dbg(&urb->dev->dev, "%s - sending setup\n", __func__);
1393 keyspan_usa90_send_setup(port->serial, port,
1394 p_priv->resend_cont - 1);
1395 }
1396}
1397
1398/* Status messages from the 28xg */
1399static void usa67_instat_callback(struct urb *urb)
1400{
1401 int err;
1402 unsigned char *data = urb->transfer_buffer;
1403 struct keyspan_usa67_portStatusMessage *msg;
1404 struct usb_serial *serial;
1405 struct usb_serial_port *port;
1406 struct keyspan_port_private *p_priv;
1407 int old_dcd_state;
1408 int status = urb->status;
1409
1410 serial = urb->context;
1411
1412 if (status) {
1413 dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
1414 __func__, status);
1415 return;
1416 }
1417
1418 if (urb->actual_length !=
1419 sizeof(struct keyspan_usa67_portStatusMessage)) {
1420 dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length);
1421 return;
1422 }
1423
1424
1425 /* Now do something useful with the data */
1426 msg = (struct keyspan_usa67_portStatusMessage *)data;
1427
1428 /* Check port number from message and retrieve private data */
1429 if (msg->port >= serial->num_ports) {
1430 dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port);
1431 return;
1432 }
1433
1434 port = serial->port[msg->port];
1435 p_priv = usb_get_serial_port_data(port);
1436 if (!p_priv)
1437 goto resubmit;
1438
1439 /* Update handshaking pin state information */
1440 old_dcd_state = p_priv->dcd_state;
1441 p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0);
1442 p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0);
1443
1444 if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
1445 tty_port_tty_hangup(&port->port, true);
1446resubmit:
1447 /* Resubmit urb so we continue receiving */
1448 err = usb_submit_urb(urb, GFP_ATOMIC);
1449 if (err != 0)
1450 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
1451}
1452
1453static void usa67_glocont_callback(struct urb *urb)
1454{
1455 struct usb_serial *serial;
1456 struct usb_serial_port *port;
1457 struct keyspan_port_private *p_priv;
1458 int i;
1459
1460 serial = urb->context;
1461 for (i = 0; i < serial->num_ports; ++i) {
1462 port = serial->port[i];
1463 p_priv = usb_get_serial_port_data(port);
1464 if (!p_priv)
1465 continue;
1466
1467 if (p_priv->resend_cont) {
1468 dev_dbg(&port->dev, "%s - sending setup\n", __func__);
1469 keyspan_usa67_send_setup(serial, port,
1470 p_priv->resend_cont - 1);
1471 break;
1472 }
1473 }
1474}
1475
1476static int keyspan_write_room(struct tty_struct *tty)
1477{
1478 struct usb_serial_port *port = tty->driver_data;
1479 struct keyspan_port_private *p_priv;
1480 const struct keyspan_device_details *d_details;
1481 int flip;
1482 int data_len;
1483 struct urb *this_urb;
1484
1485 p_priv = usb_get_serial_port_data(port);
1486 d_details = p_priv->device_details;
1487
1488 /* FIXME: locking */
1489 if (d_details->msg_format == msg_usa90)
1490 data_len = 64;
1491 else
1492 data_len = 63;
1493
1494 flip = p_priv->out_flip;
1495
1496 /* Check both endpoints to see if any are available. */
1497 this_urb = p_priv->out_urbs[flip];
1498 if (this_urb != NULL) {
1499 if (this_urb->status != -EINPROGRESS)
1500 return data_len;
1501 flip = (flip + 1) & d_details->outdat_endp_flip;
1502 this_urb = p_priv->out_urbs[flip];
1503 if (this_urb != NULL) {
1504 if (this_urb->status != -EINPROGRESS)
1505 return data_len;
1506 }
1507 }
1508 return 0;
1509}
1510
1511
1512static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port)
1513{
1514 struct keyspan_port_private *p_priv;
1515 const struct keyspan_device_details *d_details;
1516 int i, err;
1517 int baud_rate, device_port;
1518 struct urb *urb;
1519 unsigned int cflag = 0;
1520
1521 p_priv = usb_get_serial_port_data(port);
1522 d_details = p_priv->device_details;
1523
1524 /* Set some sane defaults */
1525 p_priv->rts_state = 1;
1526 p_priv->dtr_state = 1;
1527 p_priv->baud = 9600;
1528
1529 /* force baud and lcr to be set on open */
1530 p_priv->old_baud = 0;
1531 p_priv->old_cflag = 0;
1532
1533 p_priv->out_flip = 0;
1534 p_priv->in_flip = 0;
1535
1536 /* Reset low level data toggle and start reading from endpoints */
1537 for (i = 0; i < 2; i++) {
1538 urb = p_priv->in_urbs[i];
1539 if (urb == NULL)
1540 continue;
1541
1542 /* make sure endpoint data toggle is synchronized
1543 with the device */
1544 usb_clear_halt(urb->dev, urb->pipe);
1545 err = usb_submit_urb(urb, GFP_KERNEL);
1546 if (err != 0)
1547 dev_dbg(&port->dev, "%s - submit urb %d failed (%d)\n", __func__, i, err);
1548 }
1549
1550 /* Reset low level data toggle on out endpoints */
1551 for (i = 0; i < 2; i++) {
1552 urb = p_priv->out_urbs[i];
1553 if (urb == NULL)
1554 continue;
1555 /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
1556 usb_pipeout(urb->pipe), 0); */
1557 }
1558
1559 /* get the terminal config for the setup message now so we don't
1560 * need to send 2 of them */
1561
1562 device_port = port->port_number;
1563 if (tty) {
1564 cflag = tty->termios.c_cflag;
1565 /* Baud rate calculation takes baud rate as an integer
1566 so other rates can be generated if desired. */
1567 baud_rate = tty_get_baud_rate(tty);
1568 /* If no match or invalid, leave as default */
1569 if (baud_rate >= 0
1570 && d_details->calculate_baud_rate(port, baud_rate, d_details->baudclk,
1571 NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) {
1572 p_priv->baud = baud_rate;
1573 }
1574 }
1575 /* set CTS/RTS handshake etc. */
1576 p_priv->cflag = cflag;
1577 p_priv->flow_control = (cflag & CRTSCTS) ? flow_cts : flow_none;
1578
1579 keyspan_send_setup(port, 1);
1580 /* mdelay(100); */
1581 /* keyspan_set_termios(port, NULL); */
1582
1583 return 0;
1584}
1585
1586static void keyspan_dtr_rts(struct usb_serial_port *port, int on)
1587{
1588 struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);
1589
1590 p_priv->rts_state = on;
1591 p_priv->dtr_state = on;
1592 keyspan_send_setup(port, 0);
1593}
1594
1595static void keyspan_close(struct usb_serial_port *port)
1596{
1597 int i;
1598 struct keyspan_port_private *p_priv;
1599
1600 p_priv = usb_get_serial_port_data(port);
1601
1602 p_priv->rts_state = 0;
1603 p_priv->dtr_state = 0;
1604
1605 keyspan_send_setup(port, 2);
1606 /* pilot-xfer seems to work best with this delay */
1607 mdelay(100);
1608
1609 p_priv->out_flip = 0;
1610 p_priv->in_flip = 0;
1611
1612 usb_kill_urb(p_priv->inack_urb);
1613 for (i = 0; i < 2; i++) {
1614 usb_kill_urb(p_priv->in_urbs[i]);
1615 usb_kill_urb(p_priv->out_urbs[i]);
1616 }
1617}
1618
1619/* download the firmware to a pre-renumeration device */
1620static int keyspan_fake_startup(struct usb_serial *serial)
1621{
1622 char *fw_name;
1623
1624 dev_dbg(&serial->dev->dev, "Keyspan startup version %04x product %04x\n",
1625 le16_to_cpu(serial->dev->descriptor.bcdDevice),
1626 le16_to_cpu(serial->dev->descriptor.idProduct));
1627
1628 if ((le16_to_cpu(serial->dev->descriptor.bcdDevice) & 0x8000)
1629 != 0x8000) {
1630 dev_dbg(&serial->dev->dev, "Firmware already loaded. Quitting.\n");
1631 return 1;
1632 }
1633
1634 /* Select firmware image on the basis of idProduct */
1635 switch (le16_to_cpu(serial->dev->descriptor.idProduct)) {
1636 case keyspan_usa28_pre_product_id:
1637 fw_name = "keyspan/usa28.fw";
1638 break;
1639
1640 case keyspan_usa28x_pre_product_id:
1641 fw_name = "keyspan/usa28x.fw";
1642 break;
1643
1644 case keyspan_usa28xa_pre_product_id:
1645 fw_name = "keyspan/usa28xa.fw";
1646 break;
1647
1648 case keyspan_usa28xb_pre_product_id:
1649 fw_name = "keyspan/usa28xb.fw";
1650 break;
1651
1652 case keyspan_usa19_pre_product_id:
1653 fw_name = "keyspan/usa19.fw";
1654 break;
1655
1656 case keyspan_usa19qi_pre_product_id:
1657 fw_name = "keyspan/usa19qi.fw";
1658 break;
1659
1660 case keyspan_mpr_pre_product_id:
1661 fw_name = "keyspan/mpr.fw";
1662 break;
1663
1664 case keyspan_usa19qw_pre_product_id:
1665 fw_name = "keyspan/usa19qw.fw";
1666 break;
1667
1668 case keyspan_usa18x_pre_product_id:
1669 fw_name = "keyspan/usa18x.fw";
1670 break;
1671
1672 case keyspan_usa19w_pre_product_id:
1673 fw_name = "keyspan/usa19w.fw";
1674 break;
1675
1676 case keyspan_usa49w_pre_product_id:
1677 fw_name = "keyspan/usa49w.fw";
1678 break;
1679
1680 case keyspan_usa49wlc_pre_product_id:
1681 fw_name = "keyspan/usa49wlc.fw";
1682 break;
1683
1684 default:
1685 dev_err(&serial->dev->dev, "Unknown product ID (%04x)\n",
1686 le16_to_cpu(serial->dev->descriptor.idProduct));
1687 return 1;
1688 }
1689
1690 dev_dbg(&serial->dev->dev, "Uploading Keyspan %s firmware.\n", fw_name);
1691
1692 if (ezusb_fx1_ihex_firmware_download(serial->dev, fw_name) < 0) {
1693 dev_err(&serial->dev->dev, "failed to load firmware \"%s\"\n",
1694 fw_name);
1695 return -ENOENT;
1696 }
1697
1698 /* after downloading firmware Renumeration will occur in a
1699 moment and the new device will bind to the real driver */
1700
1701 /* we don't want this device to have a driver assigned to it. */
1702 return 1;
1703}
1704
1705/* Helper functions used by keyspan_setup_urbs */
1706static struct usb_endpoint_descriptor const *find_ep(struct usb_serial const *serial,
1707 int endpoint)
1708{
1709 struct usb_host_interface *iface_desc;
1710 struct usb_endpoint_descriptor *ep;
1711 int i;
1712
1713 iface_desc = serial->interface->cur_altsetting;
1714 for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
1715 ep = &iface_desc->endpoint[i].desc;
1716 if (ep->bEndpointAddress == endpoint)
1717 return ep;
1718 }
1719 dev_warn(&serial->interface->dev, "found no endpoint descriptor for endpoint %x\n",
1720 endpoint);
1721 return NULL;
1722}
1723
1724static struct urb *keyspan_setup_urb(struct usb_serial *serial, int endpoint,
1725 int dir, void *ctx, char *buf, int len,
1726 void (*callback)(struct urb *))
1727{
1728 struct urb *urb;
1729 struct usb_endpoint_descriptor const *ep_desc;
1730 char const *ep_type_name;
1731
1732 if (endpoint == -1)
1733 return NULL; /* endpoint not needed */
1734
1735 dev_dbg(&serial->interface->dev, "%s - alloc for endpoint %x\n",
1736 __func__, endpoint);
1737 urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */
1738 if (!urb)
1739 return NULL;
1740
1741 if (endpoint == 0) {
1742 /* control EP filled in when used */
1743 return urb;
1744 }
1745
1746 ep_desc = find_ep(serial, endpoint);
1747 if (!ep_desc) {
1748 usb_free_urb(urb);
1749 return NULL;
1750 }
1751 if (usb_endpoint_xfer_int(ep_desc)) {
1752 ep_type_name = "INT";
1753 usb_fill_int_urb(urb, serial->dev,
1754 usb_sndintpipe(serial->dev, endpoint) | dir,
1755 buf, len, callback, ctx,
1756 ep_desc->bInterval);
1757 } else if (usb_endpoint_xfer_bulk(ep_desc)) {
1758 ep_type_name = "BULK";
1759 usb_fill_bulk_urb(urb, serial->dev,
1760 usb_sndbulkpipe(serial->dev, endpoint) | dir,
1761 buf, len, callback, ctx);
1762 } else {
1763 dev_warn(&serial->interface->dev,
1764 "unsupported endpoint type %x\n",
1765 usb_endpoint_type(ep_desc));
1766 usb_free_urb(urb);
1767 return NULL;
1768 }
1769
1770 dev_dbg(&serial->interface->dev, "%s - using urb %p for %s endpoint %x\n",
1771 __func__, urb, ep_type_name, endpoint);
1772 return urb;
1773}
1774
1775static struct callbacks {
1776 void (*instat_callback)(struct urb *);
1777 void (*glocont_callback)(struct urb *);
1778 void (*indat_callback)(struct urb *);
1779 void (*outdat_callback)(struct urb *);
1780 void (*inack_callback)(struct urb *);
1781 void (*outcont_callback)(struct urb *);
1782} keyspan_callbacks[] = {
1783 {
1784 /* msg_usa26 callbacks */
1785 .instat_callback = usa26_instat_callback,
1786 .glocont_callback = usa26_glocont_callback,
1787 .indat_callback = usa26_indat_callback,
1788 .outdat_callback = usa2x_outdat_callback,
1789 .inack_callback = usa26_inack_callback,
1790 .outcont_callback = usa26_outcont_callback,
1791 }, {
1792 /* msg_usa28 callbacks */
1793 .instat_callback = usa28_instat_callback,
1794 .glocont_callback = usa28_glocont_callback,
1795 .indat_callback = usa28_indat_callback,
1796 .outdat_callback = usa2x_outdat_callback,
1797 .inack_callback = usa28_inack_callback,
1798 .outcont_callback = usa28_outcont_callback,
1799 }, {
1800 /* msg_usa49 callbacks */
1801 .instat_callback = usa49_instat_callback,
1802 .glocont_callback = usa49_glocont_callback,
1803 .indat_callback = usa49_indat_callback,
1804 .outdat_callback = usa2x_outdat_callback,
1805 .inack_callback = usa49_inack_callback,
1806 .outcont_callback = usa49_outcont_callback,
1807 }, {
1808 /* msg_usa90 callbacks */
1809 .instat_callback = usa90_instat_callback,
1810 .glocont_callback = usa28_glocont_callback,
1811 .indat_callback = usa90_indat_callback,
1812 .outdat_callback = usa2x_outdat_callback,
1813 .inack_callback = usa28_inack_callback,
1814 .outcont_callback = usa90_outcont_callback,
1815 }, {
1816 /* msg_usa67 callbacks */
1817 .instat_callback = usa67_instat_callback,
1818 .glocont_callback = usa67_glocont_callback,
1819 .indat_callback = usa26_indat_callback,
1820 .outdat_callback = usa2x_outdat_callback,
1821 .inack_callback = usa26_inack_callback,
1822 .outcont_callback = usa26_outcont_callback,
1823 }
1824};
1825
1826 /* Generic setup urbs function that uses
1827 data in device_details */
1828static void keyspan_setup_urbs(struct usb_serial *serial)
1829{
1830 struct keyspan_serial_private *s_priv;
1831 const struct keyspan_device_details *d_details;
1832 struct callbacks *cback;
1833
1834 s_priv = usb_get_serial_data(serial);
1835 d_details = s_priv->device_details;
1836
1837 /* Setup values for the various callback routines */
1838 cback = &keyspan_callbacks[d_details->msg_format];
1839
1840 /* Allocate and set up urbs for each one that is in use,
1841 starting with instat endpoints */
1842 s_priv->instat_urb = keyspan_setup_urb
1843 (serial, d_details->instat_endpoint, USB_DIR_IN,
1844 serial, s_priv->instat_buf, INSTAT_BUFLEN,
1845 cback->instat_callback);
1846
1847 s_priv->indat_urb = keyspan_setup_urb
1848 (serial, d_details->indat_endpoint, USB_DIR_IN,
1849 serial, s_priv->indat_buf, INDAT49W_BUFLEN,
1850 usa49wg_indat_callback);
1851
1852 s_priv->glocont_urb = keyspan_setup_urb
1853 (serial, d_details->glocont_endpoint, USB_DIR_OUT,
1854 serial, s_priv->glocont_buf, GLOCONT_BUFLEN,
1855 cback->glocont_callback);
1856}
1857
1858/* usa19 function doesn't require prescaler */
1859static int keyspan_usa19_calc_baud(struct usb_serial_port *port,
1860 u32 baud_rate, u32 baudclk, u8 *rate_hi,
1861 u8 *rate_low, u8 *prescaler, int portnum)
1862{
1863 u32 b16, /* baud rate times 16 (actual rate used internally) */
1864 div, /* divisor */
1865 cnt; /* inverse of divisor (programmed into 8051) */
1866
1867 dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate);
1868
1869 /* prevent divide by zero... */
1870 b16 = baud_rate * 16L;
1871 if (b16 == 0)
1872 return KEYSPAN_INVALID_BAUD_RATE;
1873 /* Any "standard" rate over 57k6 is marginal on the USA-19
1874 as we run out of divisor resolution. */
1875 if (baud_rate > 57600)
1876 return KEYSPAN_INVALID_BAUD_RATE;
1877
1878 /* calculate the divisor and the counter (its inverse) */
1879 div = baudclk / b16;
1880 if (div == 0)
1881 return KEYSPAN_INVALID_BAUD_RATE;
1882 else
1883 cnt = 0 - div;
1884
1885 if (div > 0xffff)
1886 return KEYSPAN_INVALID_BAUD_RATE;
1887
1888 /* return the counter values if non-null */
1889 if (rate_low)
1890 *rate_low = (u8) (cnt & 0xff);
1891 if (rate_hi)
1892 *rate_hi = (u8) ((cnt >> 8) & 0xff);
1893 if (rate_low && rate_hi)
1894 dev_dbg(&port->dev, "%s - %d %02x %02x.\n",
1895 __func__, baud_rate, *rate_hi, *rate_low);
1896 return KEYSPAN_BAUD_RATE_OK;
1897}
1898
1899/* usa19hs function doesn't require prescaler */
1900static int keyspan_usa19hs_calc_baud(struct usb_serial_port *port,
1901 u32 baud_rate, u32 baudclk, u8 *rate_hi,
1902 u8 *rate_low, u8 *prescaler, int portnum)
1903{
1904 u32 b16, /* baud rate times 16 (actual rate used internally) */
1905 div; /* divisor */
1906
1907 dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate);
1908
1909 /* prevent divide by zero... */
1910 b16 = baud_rate * 16L;
1911 if (b16 == 0)
1912 return KEYSPAN_INVALID_BAUD_RATE;
1913
1914 /* calculate the divisor */
1915 div = baudclk / b16;
1916 if (div == 0)
1917 return KEYSPAN_INVALID_BAUD_RATE;
1918
1919 if (div > 0xffff)
1920 return KEYSPAN_INVALID_BAUD_RATE;
1921
1922 /* return the counter values if non-null */
1923 if (rate_low)
1924 *rate_low = (u8) (div & 0xff);
1925
1926 if (rate_hi)
1927 *rate_hi = (u8) ((div >> 8) & 0xff);
1928
1929 if (rate_low && rate_hi)
1930 dev_dbg(&port->dev, "%s - %d %02x %02x.\n",
1931 __func__, baud_rate, *rate_hi, *rate_low);
1932
1933 return KEYSPAN_BAUD_RATE_OK;
1934}
1935
1936static int keyspan_usa19w_calc_baud(struct usb_serial_port *port,
1937 u32 baud_rate, u32 baudclk, u8 *rate_hi,
1938 u8 *rate_low, u8 *prescaler, int portnum)
1939{
1940 u32 b16, /* baud rate times 16 (actual rate used internally) */
1941 clk, /* clock with 13/8 prescaler */
1942 div, /* divisor using 13/8 prescaler */
1943 res, /* resulting baud rate using 13/8 prescaler */
1944 diff, /* error using 13/8 prescaler */
1945 smallest_diff;
1946 u8 best_prescaler;
1947 int i;
1948
1949 dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate);
1950
1951 /* prevent divide by zero */
1952 b16 = baud_rate * 16L;
1953 if (b16 == 0)
1954 return KEYSPAN_INVALID_BAUD_RATE;
1955
1956 /* Calculate prescaler by trying them all and looking
1957 for best fit */
1958
1959 /* start with largest possible difference */
1960 smallest_diff = 0xffffffff;
1961
1962 /* 0 is an invalid prescaler, used as a flag */
1963 best_prescaler = 0;
1964
1965 for (i = 8; i <= 0xff; ++i) {
1966 clk = (baudclk * 8) / (u32) i;
1967
1968 div = clk / b16;
1969 if (div == 0)
1970 continue;
1971
1972 res = clk / div;
1973 diff = (res > b16) ? (res-b16) : (b16-res);
1974
1975 if (diff < smallest_diff) {
1976 best_prescaler = i;
1977 smallest_diff = diff;
1978 }
1979 }
1980
1981 if (best_prescaler == 0)
1982 return KEYSPAN_INVALID_BAUD_RATE;
1983
1984 clk = (baudclk * 8) / (u32) best_prescaler;
1985 div = clk / b16;
1986
1987 /* return the divisor and prescaler if non-null */
1988 if (rate_low)
1989 *rate_low = (u8) (div & 0xff);
1990 if (rate_hi)
1991 *rate_hi = (u8) ((div >> 8) & 0xff);
1992 if (prescaler) {
1993 *prescaler = best_prescaler;
1994 /* dev_dbg(&port->dev, "%s - %d %d\n", __func__, *prescaler, div); */
1995 }
1996 return KEYSPAN_BAUD_RATE_OK;
1997}
1998
1999 /* USA-28 supports different maximum baud rates on each port */
2000static int keyspan_usa28_calc_baud(struct usb_serial_port *port,
2001 u32 baud_rate, u32 baudclk, u8 *rate_hi,
2002 u8 *rate_low, u8 *prescaler, int portnum)
2003{
2004 u32 b16, /* baud rate times 16 (actual rate used internally) */
2005 div, /* divisor */
2006 cnt; /* inverse of divisor (programmed into 8051) */
2007
2008 dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate);
2009
2010 /* prevent divide by zero */
2011 b16 = baud_rate * 16L;
2012 if (b16 == 0)
2013 return KEYSPAN_INVALID_BAUD_RATE;
2014
2015 /* calculate the divisor and the counter (its inverse) */
2016 div = KEYSPAN_USA28_BAUDCLK / b16;
2017 if (div == 0)
2018 return KEYSPAN_INVALID_BAUD_RATE;
2019 else
2020 cnt = 0 - div;
2021
2022 /* check for out of range, based on portnum,
2023 and return result */
2024 if (portnum == 0) {
2025 if (div > 0xffff)
2026 return KEYSPAN_INVALID_BAUD_RATE;
2027 } else {
2028 if (portnum == 1) {
2029 if (div > 0xff)
2030 return KEYSPAN_INVALID_BAUD_RATE;
2031 } else
2032 return KEYSPAN_INVALID_BAUD_RATE;
2033 }
2034
2035 /* return the counter values if not NULL
2036 (port 1 will ignore retHi) */
2037 if (rate_low)
2038 *rate_low = (u8) (cnt & 0xff);
2039 if (rate_hi)
2040 *rate_hi = (u8) ((cnt >> 8) & 0xff);
2041 dev_dbg(&port->dev, "%s - %d OK.\n", __func__, baud_rate);
2042 return KEYSPAN_BAUD_RATE_OK;
2043}
2044
2045static int keyspan_usa26_send_setup(struct usb_serial *serial,
2046 struct usb_serial_port *port,
2047 int reset_port)
2048{
2049 struct keyspan_usa26_portControlMessage msg;
2050 struct keyspan_serial_private *s_priv;
2051 struct keyspan_port_private *p_priv;
2052 const struct keyspan_device_details *d_details;
2053 struct urb *this_urb;
2054 int device_port, err;
2055
2056 dev_dbg(&port->dev, "%s reset=%d\n", __func__, reset_port);
2057
2058 s_priv = usb_get_serial_data(serial);
2059 p_priv = usb_get_serial_port_data(port);
2060 d_details = s_priv->device_details;
2061 device_port = port->port_number;
2062
2063 this_urb = p_priv->outcont_urb;
2064
2065 /* Make sure we have an urb then send the message */
2066 if (this_urb == NULL) {
2067 dev_dbg(&port->dev, "%s - oops no urb.\n", __func__);
2068 return -1;
2069 }
2070
2071 dev_dbg(&port->dev, "%s - endpoint %x\n",
2072 __func__, usb_pipeendpoint(this_urb->pipe));
2073
2074 /* Save reset port val for resend.
2075 Don't overwrite resend for open/close condition. */
2076 if ((reset_port + 1) > p_priv->resend_cont)
2077 p_priv->resend_cont = reset_port + 1;
2078 if (this_urb->status == -EINPROGRESS) {
2079 /* dev_dbg(&port->dev, "%s - already writing\n", __func__); */
2080 mdelay(5);
2081 return -1;
2082 }
2083
2084 memset(&msg, 0, sizeof(struct keyspan_usa26_portControlMessage));
2085
2086 /* Only set baud rate if it's changed */
2087 if (p_priv->old_baud != p_priv->baud) {
2088 p_priv->old_baud = p_priv->baud;
2089 msg.setClocking = 0xff;
2090 if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk,
2091 &msg.baudHi, &msg.baudLo, &msg.prescaler,
2092 device_port) == KEYSPAN_INVALID_BAUD_RATE) {
2093 dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n",
2094 __func__, p_priv->baud);
2095 msg.baudLo = 0;
2096 msg.baudHi = 125; /* Values for 9600 baud */
2097 msg.prescaler = 10;
2098 }
2099 msg.setPrescaler = 0xff;
2100 }
2101
2102 msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1;
2103 switch (p_priv->cflag & CSIZE) {
2104 case CS5:
2105 msg.lcr |= USA_DATABITS_5;
2106 break;
2107 case CS6:
2108 msg.lcr |= USA_DATABITS_6;
2109 break;
2110 case CS7:
2111 msg.lcr |= USA_DATABITS_7;
2112 break;
2113 case CS8:
2114 msg.lcr |= USA_DATABITS_8;
2115 break;
2116 }
2117 if (p_priv->cflag & PARENB) {
2118 /* note USA_PARITY_NONE == 0 */
2119 msg.lcr |= (p_priv->cflag & PARODD) ?
2120 USA_PARITY_ODD : USA_PARITY_EVEN;
2121 }
2122 msg.setLcr = 0xff;
2123
2124 msg.ctsFlowControl = (p_priv->flow_control == flow_cts);
2125 msg.xonFlowControl = 0;
2126 msg.setFlowControl = 0xff;
2127 msg.forwardingLength = 16;
2128 msg.xonChar = 17;
2129 msg.xoffChar = 19;
2130
2131 /* Opening port */
2132 if (reset_port == 1) {
2133 msg._txOn = 1;
2134 msg._txOff = 0;
2135 msg.txFlush = 0;
2136 msg.txBreak = 0;
2137 msg.rxOn = 1;
2138 msg.rxOff = 0;
2139 msg.rxFlush = 1;
2140 msg.rxForward = 0;
2141 msg.returnStatus = 0;
2142 msg.resetDataToggle = 0xff;
2143 }
2144
2145 /* Closing port */
2146 else if (reset_port == 2) {
2147 msg._txOn = 0;
2148 msg._txOff = 1;
2149 msg.txFlush = 0;
2150 msg.txBreak = 0;
2151 msg.rxOn = 0;
2152 msg.rxOff = 1;
2153 msg.rxFlush = 1;
2154 msg.rxForward = 0;
2155 msg.returnStatus = 0;
2156 msg.resetDataToggle = 0;
2157 }
2158
2159 /* Sending intermediate configs */
2160 else {
2161 msg._txOn = (!p_priv->break_on);
2162 msg._txOff = 0;
2163 msg.txFlush = 0;
2164 msg.txBreak = (p_priv->break_on);
2165 msg.rxOn = 0;
2166 msg.rxOff = 0;
2167 msg.rxFlush = 0;
2168 msg.rxForward = 0;
2169 msg.returnStatus = 0;
2170 msg.resetDataToggle = 0x0;
2171 }
2172
2173 /* Do handshaking outputs */
2174 msg.setTxTriState_setRts = 0xff;
2175 msg.txTriState_rts = p_priv->rts_state;
2176
2177 msg.setHskoa_setDtr = 0xff;
2178 msg.hskoa_dtr = p_priv->dtr_state;
2179
2180 p_priv->resend_cont = 0;
2181 memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
2182
2183 /* send the data out the device on control endpoint */
2184 this_urb->transfer_buffer_length = sizeof(msg);
2185
2186 err = usb_submit_urb(this_urb, GFP_ATOMIC);
2187 if (err != 0)
2188 dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);
2189 return 0;
2190}
2191
2192static int keyspan_usa28_send_setup(struct usb_serial *serial,
2193 struct usb_serial_port *port,
2194 int reset_port)
2195{
2196 struct keyspan_usa28_portControlMessage msg;
2197 struct keyspan_serial_private *s_priv;
2198 struct keyspan_port_private *p_priv;
2199 const struct keyspan_device_details *d_details;
2200 struct urb *this_urb;
2201 int device_port, err;
2202
2203 s_priv = usb_get_serial_data(serial);
2204 p_priv = usb_get_serial_port_data(port);
2205 d_details = s_priv->device_details;
2206 device_port = port->port_number;
2207
2208 /* only do something if we have a bulk out endpoint */
2209 this_urb = p_priv->outcont_urb;
2210 if (this_urb == NULL) {
2211 dev_dbg(&port->dev, "%s - oops no urb.\n", __func__);
2212 return -1;
2213 }
2214
2215 /* Save reset port val for resend.
2216 Don't overwrite resend for open/close condition. */
2217 if ((reset_port + 1) > p_priv->resend_cont)
2218 p_priv->resend_cont = reset_port + 1;
2219 if (this_urb->status == -EINPROGRESS) {
2220 dev_dbg(&port->dev, "%s already writing\n", __func__);
2221 mdelay(5);
2222 return -1;
2223 }
2224
2225 memset(&msg, 0, sizeof(struct keyspan_usa28_portControlMessage));
2226
2227 msg.setBaudRate = 1;
2228 if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk,
2229 &msg.baudHi, &msg.baudLo, NULL,
2230 device_port) == KEYSPAN_INVALID_BAUD_RATE) {
2231 dev_dbg(&port->dev, "%s - Invalid baud rate requested %d.\n",
2232 __func__, p_priv->baud);
2233 msg.baudLo = 0xff;
2234 msg.baudHi = 0xb2; /* Values for 9600 baud */
2235 }
2236
2237 /* If parity is enabled, we must calculate it ourselves. */
2238 msg.parity = 0; /* XXX for now */
2239
2240 msg.ctsFlowControl = (p_priv->flow_control == flow_cts);
2241 msg.xonFlowControl = 0;
2242
2243 /* Do handshaking outputs, DTR is inverted relative to RTS */
2244 msg.rts = p_priv->rts_state;
2245 msg.dtr = p_priv->dtr_state;
2246
2247 msg.forwardingLength = 16;
2248 msg.forwardMs = 10;
2249 msg.breakThreshold = 45;
2250 msg.xonChar = 17;
2251 msg.xoffChar = 19;
2252
2253 /*msg.returnStatus = 1;
2254 msg.resetDataToggle = 0xff;*/
2255 /* Opening port */
2256 if (reset_port == 1) {
2257 msg._txOn = 1;
2258 msg._txOff = 0;
2259 msg.txFlush = 0;
2260 msg.txForceXoff = 0;
2261 msg.txBreak = 0;
2262 msg.rxOn = 1;
2263 msg.rxOff = 0;
2264 msg.rxFlush = 1;
2265 msg.rxForward = 0;
2266 msg.returnStatus = 0;
2267 msg.resetDataToggle = 0xff;
2268 }
2269 /* Closing port */
2270 else if (reset_port == 2) {
2271 msg._txOn = 0;
2272 msg._txOff = 1;
2273 msg.txFlush = 0;
2274 msg.txForceXoff = 0;
2275 msg.txBreak = 0;
2276 msg.rxOn = 0;
2277 msg.rxOff = 1;
2278 msg.rxFlush = 1;
2279 msg.rxForward = 0;
2280 msg.returnStatus = 0;
2281 msg.resetDataToggle = 0;
2282 }
2283 /* Sending intermediate configs */
2284 else {
2285 msg._txOn = (!p_priv->break_on);
2286 msg._txOff = 0;
2287 msg.txFlush = 0;
2288 msg.txForceXoff = 0;
2289 msg.txBreak = (p_priv->break_on);
2290 msg.rxOn = 0;
2291 msg.rxOff = 0;
2292 msg.rxFlush = 0;
2293 msg.rxForward = 0;
2294 msg.returnStatus = 0;
2295 msg.resetDataToggle = 0x0;
2296 }
2297
2298 p_priv->resend_cont = 0;
2299 memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
2300
2301 /* send the data out the device on control endpoint */
2302 this_urb->transfer_buffer_length = sizeof(msg);
2303
2304 err = usb_submit_urb(this_urb, GFP_ATOMIC);
2305 if (err != 0)
2306 dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed\n", __func__);
2307
2308 return 0;
2309}
2310
2311static int keyspan_usa49_send_setup(struct usb_serial *serial,
2312 struct usb_serial_port *port,
2313 int reset_port)
2314{
2315 struct keyspan_usa49_portControlMessage msg;
2316 struct usb_ctrlrequest *dr = NULL;
2317 struct keyspan_serial_private *s_priv;
2318 struct keyspan_port_private *p_priv;
2319 const struct keyspan_device_details *d_details;
2320 struct urb *this_urb;
2321 int err, device_port;
2322
2323 s_priv = usb_get_serial_data(serial);
2324 p_priv = usb_get_serial_port_data(port);
2325 d_details = s_priv->device_details;
2326
2327 this_urb = s_priv->glocont_urb;
2328
2329 /* Work out which port within the device is being setup */
2330 device_port = port->port_number;
2331
2332 /* Make sure we have an urb then send the message */
2333 if (this_urb == NULL) {
2334 dev_dbg(&port->dev, "%s - oops no urb for port.\n", __func__);
2335 return -1;
2336 }
2337
2338 dev_dbg(&port->dev, "%s - endpoint %x (%d)\n",
2339 __func__, usb_pipeendpoint(this_urb->pipe), device_port);
2340
2341 /* Save reset port val for resend.
2342 Don't overwrite resend for open/close condition. */
2343 if ((reset_port + 1) > p_priv->resend_cont)
2344 p_priv->resend_cont = reset_port + 1;
2345
2346 if (this_urb->status == -EINPROGRESS) {
2347 /* dev_dbg(&port->dev, "%s - already writing\n", __func__); */
2348 mdelay(5);
2349 return -1;
2350 }
2351
2352 memset(&msg, 0, sizeof(struct keyspan_usa49_portControlMessage));
2353
2354 msg.portNumber = device_port;
2355
2356 /* Only set baud rate if it's changed */
2357 if (p_priv->old_baud != p_priv->baud) {
2358 p_priv->old_baud = p_priv->baud;
2359 msg.setClocking = 0xff;
2360 if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk,
2361 &msg.baudHi, &msg.baudLo, &msg.prescaler,
2362 device_port) == KEYSPAN_INVALID_BAUD_RATE) {
2363 dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n",
2364 __func__, p_priv->baud);
2365 msg.baudLo = 0;
2366 msg.baudHi = 125; /* Values for 9600 baud */
2367 msg.prescaler = 10;
2368 }
2369 /* msg.setPrescaler = 0xff; */
2370 }
2371
2372 msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1;
2373 switch (p_priv->cflag & CSIZE) {
2374 case CS5:
2375 msg.lcr |= USA_DATABITS_5;
2376 break;
2377 case CS6:
2378 msg.lcr |= USA_DATABITS_6;
2379 break;
2380 case CS7:
2381 msg.lcr |= USA_DATABITS_7;
2382 break;
2383 case CS8:
2384 msg.lcr |= USA_DATABITS_8;
2385 break;
2386 }
2387 if (p_priv->cflag & PARENB) {
2388 /* note USA_PARITY_NONE == 0 */
2389 msg.lcr |= (p_priv->cflag & PARODD) ?
2390 USA_PARITY_ODD : USA_PARITY_EVEN;
2391 }
2392 msg.setLcr = 0xff;
2393
2394 msg.ctsFlowControl = (p_priv->flow_control == flow_cts);
2395 msg.xonFlowControl = 0;
2396 msg.setFlowControl = 0xff;
2397
2398 msg.forwardingLength = 16;
2399 msg.xonChar = 17;
2400 msg.xoffChar = 19;
2401
2402 /* Opening port */
2403 if (reset_port == 1) {
2404 msg._txOn = 1;
2405 msg._txOff = 0;
2406 msg.txFlush = 0;
2407 msg.txBreak = 0;
2408 msg.rxOn = 1;
2409 msg.rxOff = 0;
2410 msg.rxFlush = 1;
2411 msg.rxForward = 0;
2412 msg.returnStatus = 0;
2413 msg.resetDataToggle = 0xff;
2414 msg.enablePort = 1;
2415 msg.disablePort = 0;
2416 }
2417 /* Closing port */
2418 else if (reset_port == 2) {
2419 msg._txOn = 0;
2420 msg._txOff = 1;
2421 msg.txFlush = 0;
2422 msg.txBreak = 0;
2423 msg.rxOn = 0;
2424 msg.rxOff = 1;
2425 msg.rxFlush = 1;
2426 msg.rxForward = 0;
2427 msg.returnStatus = 0;
2428 msg.resetDataToggle = 0;
2429 msg.enablePort = 0;
2430 msg.disablePort = 1;
2431 }
2432 /* Sending intermediate configs */
2433 else {
2434 msg._txOn = (!p_priv->break_on);
2435 msg._txOff = 0;
2436 msg.txFlush = 0;
2437 msg.txBreak = (p_priv->break_on);
2438 msg.rxOn = 0;
2439 msg.rxOff = 0;
2440 msg.rxFlush = 0;
2441 msg.rxForward = 0;
2442 msg.returnStatus = 0;
2443 msg.resetDataToggle = 0x0;
2444 msg.enablePort = 0;
2445 msg.disablePort = 0;
2446 }
2447
2448 /* Do handshaking outputs */
2449 msg.setRts = 0xff;
2450 msg.rts = p_priv->rts_state;
2451
2452 msg.setDtr = 0xff;
2453 msg.dtr = p_priv->dtr_state;
2454
2455 p_priv->resend_cont = 0;
2456
2457 /* if the device is a 49wg, we send control message on usb
2458 control EP 0 */
2459
2460 if (d_details->product_id == keyspan_usa49wg_product_id) {
2461 dr = (void *)(s_priv->ctrl_buf);
2462 dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_OUT;
2463 dr->bRequest = 0xB0; /* 49wg control message */
2464 dr->wValue = 0;
2465 dr->wIndex = 0;
2466 dr->wLength = cpu_to_le16(sizeof(msg));
2467
2468 memcpy(s_priv->glocont_buf, &msg, sizeof(msg));
2469
2470 usb_fill_control_urb(this_urb, serial->dev,
2471 usb_sndctrlpipe(serial->dev, 0),
2472 (unsigned char *)dr, s_priv->glocont_buf,
2473 sizeof(msg), usa49_glocont_callback, serial);
2474
2475 } else {
2476 memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
2477
2478 /* send the data out the device on control endpoint */
2479 this_urb->transfer_buffer_length = sizeof(msg);
2480 }
2481 err = usb_submit_urb(this_urb, GFP_ATOMIC);
2482 if (err != 0)
2483 dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);
2484
2485 return 0;
2486}
2487
2488static int keyspan_usa90_send_setup(struct usb_serial *serial,
2489 struct usb_serial_port *port,
2490 int reset_port)
2491{
2492 struct keyspan_usa90_portControlMessage msg;
2493 struct keyspan_serial_private *s_priv;
2494 struct keyspan_port_private *p_priv;
2495 const struct keyspan_device_details *d_details;
2496 struct urb *this_urb;
2497 int err;
2498 u8 prescaler;
2499
2500 s_priv = usb_get_serial_data(serial);
2501 p_priv = usb_get_serial_port_data(port);
2502 d_details = s_priv->device_details;
2503
2504 /* only do something if we have a bulk out endpoint */
2505 this_urb = p_priv->outcont_urb;
2506 if (this_urb == NULL) {
2507 dev_dbg(&port->dev, "%s - oops no urb.\n", __func__);
2508 return -1;
2509 }
2510
2511 /* Save reset port val for resend.
2512 Don't overwrite resend for open/close condition. */
2513 if ((reset_port + 1) > p_priv->resend_cont)
2514 p_priv->resend_cont = reset_port + 1;
2515 if (this_urb->status == -EINPROGRESS) {
2516 dev_dbg(&port->dev, "%s already writing\n", __func__);
2517 mdelay(5);
2518 return -1;
2519 }
2520
2521 memset(&msg, 0, sizeof(struct keyspan_usa90_portControlMessage));
2522
2523 /* Only set baud rate if it's changed */
2524 if (p_priv->old_baud != p_priv->baud) {
2525 p_priv->old_baud = p_priv->baud;
2526 msg.setClocking = 0x01;
2527 if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk,
2528 &msg.baudHi, &msg.baudLo, &prescaler, 0) == KEYSPAN_INVALID_BAUD_RATE) {
2529 dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n",
2530 __func__, p_priv->baud);
2531 p_priv->baud = 9600;
2532 d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk,
2533 &msg.baudHi, &msg.baudLo, &prescaler, 0);
2534 }
2535 msg.setRxMode = 1;
2536 msg.setTxMode = 1;
2537 }
2538
2539 /* modes must always be correctly specified */
2540 if (p_priv->baud > 57600) {
2541 msg.rxMode = RXMODE_DMA;
2542 msg.txMode = TXMODE_DMA;
2543 } else {
2544 msg.rxMode = RXMODE_BYHAND;
2545 msg.txMode = TXMODE_BYHAND;
2546 }
2547
2548 msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1;
2549 switch (p_priv->cflag & CSIZE) {
2550 case CS5:
2551 msg.lcr |= USA_DATABITS_5;
2552 break;
2553 case CS6:
2554 msg.lcr |= USA_DATABITS_6;
2555 break;
2556 case CS7:
2557 msg.lcr |= USA_DATABITS_7;
2558 break;
2559 case CS8:
2560 msg.lcr |= USA_DATABITS_8;
2561 break;
2562 }
2563 if (p_priv->cflag & PARENB) {
2564 /* note USA_PARITY_NONE == 0 */
2565 msg.lcr |= (p_priv->cflag & PARODD) ?
2566 USA_PARITY_ODD : USA_PARITY_EVEN;
2567 }
2568 if (p_priv->old_cflag != p_priv->cflag) {
2569 p_priv->old_cflag = p_priv->cflag;
2570 msg.setLcr = 0x01;
2571 }
2572
2573 if (p_priv->flow_control == flow_cts)
2574 msg.txFlowControl = TXFLOW_CTS;
2575 msg.setTxFlowControl = 0x01;
2576 msg.setRxFlowControl = 0x01;
2577
2578 msg.rxForwardingLength = 16;
2579 msg.rxForwardingTimeout = 16;
2580 msg.txAckSetting = 0;
2581 msg.xonChar = 17;
2582 msg.xoffChar = 19;
2583
2584 /* Opening port */
2585 if (reset_port == 1) {
2586 msg.portEnabled = 1;
2587 msg.rxFlush = 1;
2588 msg.txBreak = (p_priv->break_on);
2589 }
2590 /* Closing port */
2591 else if (reset_port == 2)
2592 msg.portEnabled = 0;
2593 /* Sending intermediate configs */
2594 else {
2595 msg.portEnabled = 1;
2596 msg.txBreak = (p_priv->break_on);
2597 }
2598
2599 /* Do handshaking outputs */
2600 msg.setRts = 0x01;
2601 msg.rts = p_priv->rts_state;
2602
2603 msg.setDtr = 0x01;
2604 msg.dtr = p_priv->dtr_state;
2605
2606 p_priv->resend_cont = 0;
2607 memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
2608
2609 /* send the data out the device on control endpoint */
2610 this_urb->transfer_buffer_length = sizeof(msg);
2611
2612 err = usb_submit_urb(this_urb, GFP_ATOMIC);
2613 if (err != 0)
2614 dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);
2615 return 0;
2616}
2617
2618static int keyspan_usa67_send_setup(struct usb_serial *serial,
2619 struct usb_serial_port *port,
2620 int reset_port)
2621{
2622 struct keyspan_usa67_portControlMessage msg;
2623 struct keyspan_serial_private *s_priv;
2624 struct keyspan_port_private *p_priv;
2625 const struct keyspan_device_details *d_details;
2626 struct urb *this_urb;
2627 int err, device_port;
2628
2629 s_priv = usb_get_serial_data(serial);
2630 p_priv = usb_get_serial_port_data(port);
2631 d_details = s_priv->device_details;
2632
2633 this_urb = s_priv->glocont_urb;
2634
2635 /* Work out which port within the device is being setup */
2636 device_port = port->port_number;
2637
2638 /* Make sure we have an urb then send the message */
2639 if (this_urb == NULL) {
2640 dev_dbg(&port->dev, "%s - oops no urb for port.\n", __func__);
2641 return -1;
2642 }
2643
2644 /* Save reset port val for resend.
2645 Don't overwrite resend for open/close condition. */
2646 if ((reset_port + 1) > p_priv->resend_cont)
2647 p_priv->resend_cont = reset_port + 1;
2648 if (this_urb->status == -EINPROGRESS) {
2649 /* dev_dbg(&port->dev, "%s - already writing\n", __func__); */
2650 mdelay(5);
2651 return -1;
2652 }
2653
2654 memset(&msg, 0, sizeof(struct keyspan_usa67_portControlMessage));
2655
2656 msg.port = device_port;
2657
2658 /* Only set baud rate if it's changed */
2659 if (p_priv->old_baud != p_priv->baud) {
2660 p_priv->old_baud = p_priv->baud;
2661 msg.setClocking = 0xff;
2662 if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk,
2663 &msg.baudHi, &msg.baudLo, &msg.prescaler,
2664 device_port) == KEYSPAN_INVALID_BAUD_RATE) {
2665 dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n",
2666 __func__, p_priv->baud);
2667 msg.baudLo = 0;
2668 msg.baudHi = 125; /* Values for 9600 baud */
2669 msg.prescaler = 10;
2670 }
2671 msg.setPrescaler = 0xff;
2672 }
2673
2674 msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1;
2675 switch (p_priv->cflag & CSIZE) {
2676 case CS5:
2677 msg.lcr |= USA_DATABITS_5;
2678 break;
2679 case CS6:
2680 msg.lcr |= USA_DATABITS_6;
2681 break;
2682 case CS7:
2683 msg.lcr |= USA_DATABITS_7;
2684 break;
2685 case CS8:
2686 msg.lcr |= USA_DATABITS_8;
2687 break;
2688 }
2689 if (p_priv->cflag & PARENB) {
2690 /* note USA_PARITY_NONE == 0 */
2691 msg.lcr |= (p_priv->cflag & PARODD) ?
2692 USA_PARITY_ODD : USA_PARITY_EVEN;
2693 }
2694 msg.setLcr = 0xff;
2695
2696 msg.ctsFlowControl = (p_priv->flow_control == flow_cts);
2697 msg.xonFlowControl = 0;
2698 msg.setFlowControl = 0xff;
2699 msg.forwardingLength = 16;
2700 msg.xonChar = 17;
2701 msg.xoffChar = 19;
2702
2703 if (reset_port == 1) {
2704 /* Opening port */
2705 msg._txOn = 1;
2706 msg._txOff = 0;
2707 msg.txFlush = 0;
2708 msg.txBreak = 0;
2709 msg.rxOn = 1;
2710 msg.rxOff = 0;
2711 msg.rxFlush = 1;
2712 msg.rxForward = 0;
2713 msg.returnStatus = 0;
2714 msg.resetDataToggle = 0xff;
2715 } else if (reset_port == 2) {
2716 /* Closing port */
2717 msg._txOn = 0;
2718 msg._txOff = 1;
2719 msg.txFlush = 0;
2720 msg.txBreak = 0;
2721 msg.rxOn = 0;
2722 msg.rxOff = 1;
2723 msg.rxFlush = 1;
2724 msg.rxForward = 0;
2725 msg.returnStatus = 0;
2726 msg.resetDataToggle = 0;
2727 } else {
2728 /* Sending intermediate configs */
2729 msg._txOn = (!p_priv->break_on);
2730 msg._txOff = 0;
2731 msg.txFlush = 0;
2732 msg.txBreak = (p_priv->break_on);
2733 msg.rxOn = 0;
2734 msg.rxOff = 0;
2735 msg.rxFlush = 0;
2736 msg.rxForward = 0;
2737 msg.returnStatus = 0;
2738 msg.resetDataToggle = 0x0;
2739 }
2740
2741 /* Do handshaking outputs */
2742 msg.setTxTriState_setRts = 0xff;
2743 msg.txTriState_rts = p_priv->rts_state;
2744
2745 msg.setHskoa_setDtr = 0xff;
2746 msg.hskoa_dtr = p_priv->dtr_state;
2747
2748 p_priv->resend_cont = 0;
2749
2750 memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
2751
2752 /* send the data out the device on control endpoint */
2753 this_urb->transfer_buffer_length = sizeof(msg);
2754
2755 err = usb_submit_urb(this_urb, GFP_ATOMIC);
2756 if (err != 0)
2757 dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);
2758 return 0;
2759}
2760
2761static void keyspan_send_setup(struct usb_serial_port *port, int reset_port)
2762{
2763 struct usb_serial *serial = port->serial;
2764 struct keyspan_serial_private *s_priv;
2765 const struct keyspan_device_details *d_details;
2766
2767 s_priv = usb_get_serial_data(serial);
2768 d_details = s_priv->device_details;
2769
2770 switch (d_details->msg_format) {
2771 case msg_usa26:
2772 keyspan_usa26_send_setup(serial, port, reset_port);
2773 break;
2774 case msg_usa28:
2775 keyspan_usa28_send_setup(serial, port, reset_port);
2776 break;
2777 case msg_usa49:
2778 keyspan_usa49_send_setup(serial, port, reset_port);
2779 break;
2780 case msg_usa90:
2781 keyspan_usa90_send_setup(serial, port, reset_port);
2782 break;
2783 case msg_usa67:
2784 keyspan_usa67_send_setup(serial, port, reset_port);
2785 break;
2786 }
2787}
2788
2789
2790/* Gets called by the "real" driver (ie once firmware is loaded
2791 and renumeration has taken place. */
2792static int keyspan_startup(struct usb_serial *serial)
2793{
2794 int i, err;
2795 struct keyspan_serial_private *s_priv;
2796 const struct keyspan_device_details *d_details;
2797
2798 for (i = 0; (d_details = keyspan_devices[i]) != NULL; ++i)
2799 if (d_details->product_id ==
2800 le16_to_cpu(serial->dev->descriptor.idProduct))
2801 break;
2802 if (d_details == NULL) {
2803 dev_err(&serial->dev->dev, "%s - unknown product id %x\n",
2804 __func__, le16_to_cpu(serial->dev->descriptor.idProduct));
2805 return -ENODEV;
2806 }
2807
2808 /* Setup private data for serial driver */
2809 s_priv = kzalloc(sizeof(struct keyspan_serial_private), GFP_KERNEL);
2810 if (!s_priv)
2811 return -ENOMEM;
2812
2813 s_priv->instat_buf = kzalloc(INSTAT_BUFLEN, GFP_KERNEL);
2814 if (!s_priv->instat_buf)
2815 goto err_instat_buf;
2816
2817 s_priv->indat_buf = kzalloc(INDAT49W_BUFLEN, GFP_KERNEL);
2818 if (!s_priv->indat_buf)
2819 goto err_indat_buf;
2820
2821 s_priv->glocont_buf = kzalloc(GLOCONT_BUFLEN, GFP_KERNEL);
2822 if (!s_priv->glocont_buf)
2823 goto err_glocont_buf;
2824
2825 s_priv->ctrl_buf = kzalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
2826 if (!s_priv->ctrl_buf)
2827 goto err_ctrl_buf;
2828
2829 s_priv->device_details = d_details;
2830 usb_set_serial_data(serial, s_priv);
2831
2832 keyspan_setup_urbs(serial);
2833
2834 if (s_priv->instat_urb != NULL) {
2835 err = usb_submit_urb(s_priv->instat_urb, GFP_KERNEL);
2836 if (err != 0)
2837 dev_dbg(&serial->dev->dev, "%s - submit instat urb failed %d\n", __func__, err);
2838 }
2839 if (s_priv->indat_urb != NULL) {
2840 err = usb_submit_urb(s_priv->indat_urb, GFP_KERNEL);
2841 if (err != 0)
2842 dev_dbg(&serial->dev->dev, "%s - submit indat urb failed %d\n", __func__, err);
2843 }
2844
2845 return 0;
2846
2847err_ctrl_buf:
2848 kfree(s_priv->glocont_buf);
2849err_glocont_buf:
2850 kfree(s_priv->indat_buf);
2851err_indat_buf:
2852 kfree(s_priv->instat_buf);
2853err_instat_buf:
2854 kfree(s_priv);
2855
2856 return -ENOMEM;
2857}
2858
2859static void keyspan_disconnect(struct usb_serial *serial)
2860{
2861 struct keyspan_serial_private *s_priv;
2862
2863 s_priv = usb_get_serial_data(serial);
2864
2865 usb_kill_urb(s_priv->instat_urb);
2866 usb_kill_urb(s_priv->glocont_urb);
2867 usb_kill_urb(s_priv->indat_urb);
2868}
2869
2870static void keyspan_release(struct usb_serial *serial)
2871{
2872 struct keyspan_serial_private *s_priv;
2873
2874 s_priv = usb_get_serial_data(serial);
2875
2876 /* Make sure to unlink the URBs submitted in attach. */
2877 usb_kill_urb(s_priv->instat_urb);
2878 usb_kill_urb(s_priv->indat_urb);
2879
2880 usb_free_urb(s_priv->instat_urb);
2881 usb_free_urb(s_priv->indat_urb);
2882 usb_free_urb(s_priv->glocont_urb);
2883
2884 kfree(s_priv->ctrl_buf);
2885 kfree(s_priv->glocont_buf);
2886 kfree(s_priv->indat_buf);
2887 kfree(s_priv->instat_buf);
2888
2889 kfree(s_priv);
2890}
2891
2892static int keyspan_port_probe(struct usb_serial_port *port)
2893{
2894 struct usb_serial *serial = port->serial;
2895 struct keyspan_serial_private *s_priv;
2896 struct keyspan_port_private *p_priv;
2897 const struct keyspan_device_details *d_details;
2898 struct callbacks *cback;
2899 int endp;
2900 int port_num;
2901 int i;
2902
2903 s_priv = usb_get_serial_data(serial);
2904 d_details = s_priv->device_details;
2905
2906 p_priv = kzalloc(sizeof(*p_priv), GFP_KERNEL);
2907 if (!p_priv)
2908 return -ENOMEM;
2909
2910 for (i = 0; i < ARRAY_SIZE(p_priv->in_buffer); ++i) {
2911 p_priv->in_buffer[i] = kzalloc(IN_BUFLEN, GFP_KERNEL);
2912 if (!p_priv->in_buffer[i])
2913 goto err_in_buffer;
2914 }
2915
2916 for (i = 0; i < ARRAY_SIZE(p_priv->out_buffer); ++i) {
2917 p_priv->out_buffer[i] = kzalloc(OUT_BUFLEN, GFP_KERNEL);
2918 if (!p_priv->out_buffer[i])
2919 goto err_out_buffer;
2920 }
2921
2922 p_priv->inack_buffer = kzalloc(INACK_BUFLEN, GFP_KERNEL);
2923 if (!p_priv->inack_buffer)
2924 goto err_inack_buffer;
2925
2926 p_priv->outcont_buffer = kzalloc(OUTCONT_BUFLEN, GFP_KERNEL);
2927 if (!p_priv->outcont_buffer)
2928 goto err_outcont_buffer;
2929
2930 p_priv->device_details = d_details;
2931
2932 /* Setup values for the various callback routines */
2933 cback = &keyspan_callbacks[d_details->msg_format];
2934
2935 port_num = port->port_number;
2936
2937 /* Do indat endpoints first, once for each flip */
2938 endp = d_details->indat_endpoints[port_num];
2939 for (i = 0; i <= d_details->indat_endp_flip; ++i, ++endp) {
2940 p_priv->in_urbs[i] = keyspan_setup_urb(serial, endp,
2941 USB_DIR_IN, port,
2942 p_priv->in_buffer[i],
2943 IN_BUFLEN,
2944 cback->indat_callback);
2945 }
2946 /* outdat endpoints also have flip */
2947 endp = d_details->outdat_endpoints[port_num];
2948 for (i = 0; i <= d_details->outdat_endp_flip; ++i, ++endp) {
2949 p_priv->out_urbs[i] = keyspan_setup_urb(serial, endp,
2950 USB_DIR_OUT, port,
2951 p_priv->out_buffer[i],
2952 OUT_BUFLEN,
2953 cback->outdat_callback);
2954 }
2955 /* inack endpoint */
2956 p_priv->inack_urb = keyspan_setup_urb(serial,
2957 d_details->inack_endpoints[port_num],
2958 USB_DIR_IN, port,
2959 p_priv->inack_buffer,
2960 INACK_BUFLEN,
2961 cback->inack_callback);
2962 /* outcont endpoint */
2963 p_priv->outcont_urb = keyspan_setup_urb(serial,
2964 d_details->outcont_endpoints[port_num],
2965 USB_DIR_OUT, port,
2966 p_priv->outcont_buffer,
2967 OUTCONT_BUFLEN,
2968 cback->outcont_callback);
2969
2970 usb_set_serial_port_data(port, p_priv);
2971
2972 return 0;
2973
2974err_outcont_buffer:
2975 kfree(p_priv->inack_buffer);
2976err_inack_buffer:
2977 for (i = 0; i < ARRAY_SIZE(p_priv->out_buffer); ++i)
2978 kfree(p_priv->out_buffer[i]);
2979err_out_buffer:
2980 for (i = 0; i < ARRAY_SIZE(p_priv->in_buffer); ++i)
2981 kfree(p_priv->in_buffer[i]);
2982err_in_buffer:
2983 kfree(p_priv);
2984
2985 return -ENOMEM;
2986}
2987
2988static int keyspan_port_remove(struct usb_serial_port *port)
2989{
2990 struct keyspan_port_private *p_priv;
2991 int i;
2992
2993 p_priv = usb_get_serial_port_data(port);
2994
2995 usb_kill_urb(p_priv->inack_urb);
2996 usb_kill_urb(p_priv->outcont_urb);
2997 for (i = 0; i < 2; i++) {
2998 usb_kill_urb(p_priv->in_urbs[i]);
2999 usb_kill_urb(p_priv->out_urbs[i]);
3000 }
3001
3002 usb_free_urb(p_priv->inack_urb);
3003 usb_free_urb(p_priv->outcont_urb);
3004 for (i = 0; i < 2; i++) {
3005 usb_free_urb(p_priv->in_urbs[i]);
3006 usb_free_urb(p_priv->out_urbs[i]);
3007 }
3008
3009 kfree(p_priv->outcont_buffer);
3010 kfree(p_priv->inack_buffer);
3011 for (i = 0; i < ARRAY_SIZE(p_priv->out_buffer); ++i)
3012 kfree(p_priv->out_buffer[i]);
3013 for (i = 0; i < ARRAY_SIZE(p_priv->in_buffer); ++i)
3014 kfree(p_priv->in_buffer[i]);
3015
3016 kfree(p_priv);
3017
3018 return 0;
3019}
3020
3021/* Structs for the devices, pre and post renumeration. */
3022static struct usb_serial_driver keyspan_pre_device = {
3023 .driver = {
3024 .owner = THIS_MODULE,
3025 .name = "keyspan_no_firm",
3026 },
3027 .description = "Keyspan - (without firmware)",
3028 .id_table = keyspan_pre_ids,
3029 .num_ports = 1,
3030 .attach = keyspan_fake_startup,
3031};
3032
3033static struct usb_serial_driver keyspan_1port_device = {
3034 .driver = {
3035 .owner = THIS_MODULE,
3036 .name = "keyspan_1",
3037 },
3038 .description = "Keyspan 1 port adapter",
3039 .id_table = keyspan_1port_ids,
3040 .num_ports = 1,
3041 .open = keyspan_open,
3042 .close = keyspan_close,
3043 .dtr_rts = keyspan_dtr_rts,
3044 .write = keyspan_write,
3045 .write_room = keyspan_write_room,
3046 .set_termios = keyspan_set_termios,
3047 .break_ctl = keyspan_break_ctl,
3048 .tiocmget = keyspan_tiocmget,
3049 .tiocmset = keyspan_tiocmset,
3050 .attach = keyspan_startup,
3051 .disconnect = keyspan_disconnect,
3052 .release = keyspan_release,
3053 .port_probe = keyspan_port_probe,
3054 .port_remove = keyspan_port_remove,
3055};
3056
3057static struct usb_serial_driver keyspan_2port_device = {
3058 .driver = {
3059 .owner = THIS_MODULE,
3060 .name = "keyspan_2",
3061 },
3062 .description = "Keyspan 2 port adapter",
3063 .id_table = keyspan_2port_ids,
3064 .num_ports = 2,
3065 .open = keyspan_open,
3066 .close = keyspan_close,
3067 .dtr_rts = keyspan_dtr_rts,
3068 .write = keyspan_write,
3069 .write_room = keyspan_write_room,
3070 .set_termios = keyspan_set_termios,
3071 .break_ctl = keyspan_break_ctl,
3072 .tiocmget = keyspan_tiocmget,
3073 .tiocmset = keyspan_tiocmset,
3074 .attach = keyspan_startup,
3075 .disconnect = keyspan_disconnect,
3076 .release = keyspan_release,
3077 .port_probe = keyspan_port_probe,
3078 .port_remove = keyspan_port_remove,
3079};
3080
3081static struct usb_serial_driver keyspan_4port_device = {
3082 .driver = {
3083 .owner = THIS_MODULE,
3084 .name = "keyspan_4",
3085 },
3086 .description = "Keyspan 4 port adapter",
3087 .id_table = keyspan_4port_ids,
3088 .num_ports = 4,
3089 .open = keyspan_open,
3090 .close = keyspan_close,
3091 .dtr_rts = keyspan_dtr_rts,
3092 .write = keyspan_write,
3093 .write_room = keyspan_write_room,
3094 .set_termios = keyspan_set_termios,
3095 .break_ctl = keyspan_break_ctl,
3096 .tiocmget = keyspan_tiocmget,
3097 .tiocmset = keyspan_tiocmset,
3098 .attach = keyspan_startup,
3099 .disconnect = keyspan_disconnect,
3100 .release = keyspan_release,
3101 .port_probe = keyspan_port_probe,
3102 .port_remove = keyspan_port_remove,
3103};
3104
3105static struct usb_serial_driver * const serial_drivers[] = {
3106 &keyspan_pre_device, &keyspan_1port_device,
3107 &keyspan_2port_device, &keyspan_4port_device, NULL
3108};
3109
3110module_usb_serial_driver(serial_drivers, keyspan_ids_combined);
3111
3112MODULE_AUTHOR(DRIVER_AUTHOR);
3113MODULE_DESCRIPTION(DRIVER_DESC);
3114MODULE_LICENSE("GPL");
3115
3116MODULE_FIRMWARE("keyspan/usa28.fw");
3117MODULE_FIRMWARE("keyspan/usa28x.fw");
3118MODULE_FIRMWARE("keyspan/usa28xa.fw");
3119MODULE_FIRMWARE("keyspan/usa28xb.fw");
3120MODULE_FIRMWARE("keyspan/usa19.fw");
3121MODULE_FIRMWARE("keyspan/usa19qi.fw");
3122MODULE_FIRMWARE("keyspan/mpr.fw");
3123MODULE_FIRMWARE("keyspan/usa19qw.fw");
3124MODULE_FIRMWARE("keyspan/usa18x.fw");
3125MODULE_FIRMWARE("keyspan/usa19w.fw");
3126MODULE_FIRMWARE("keyspan/usa49w.fw");
3127MODULE_FIRMWARE("keyspan/usa49wlc.fw");
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 Keyspan USB to Serial Converter driver
4
5 (C) Copyright (C) 2000-2001 Hugh Blemings <hugh@blemings.org>
6 (C) Copyright (C) 2002 Greg Kroah-Hartman <greg@kroah.com>
7
8 See http://blemings.org/hugh/keyspan.html for more information.
9
10 Code in this driver inspired by and in a number of places taken
11 from Brian Warner's original Keyspan-PDA driver.
12
13 This driver has been put together with the support of Innosys, Inc.
14 and Keyspan, Inc the manufacturers of the Keyspan USB-serial products.
15 Thanks Guys :)
16
17 Thanks to Paulus for miscellaneous tidy ups, some largish chunks
18 of much nicer and/or completely new code and (perhaps most uniquely)
19 having the patience to sit down and explain why and where he'd changed
20 stuff.
21
22 Tip 'o the hat to IBM (and previously Linuxcare :) for supporting
23 staff in their work on open source projects.
24*/
25
26
27#include <linux/kernel.h>
28#include <linux/jiffies.h>
29#include <linux/errno.h>
30#include <linux/slab.h>
31#include <linux/tty.h>
32#include <linux/tty_driver.h>
33#include <linux/tty_flip.h>
34#include <linux/module.h>
35#include <linux/spinlock.h>
36#include <linux/uaccess.h>
37#include <linux/usb.h>
38#include <linux/usb/serial.h>
39#include <linux/usb/ezusb.h>
40
41#define DRIVER_AUTHOR "Hugh Blemings <hugh@misc.nu"
42#define DRIVER_DESC "Keyspan USB to Serial Converter Driver"
43
44static void keyspan_send_setup(struct usb_serial_port *port, int reset_port);
45
46static int keyspan_usa19_calc_baud(struct usb_serial_port *port,
47 u32 baud_rate, u32 baudclk,
48 u8 *rate_hi, u8 *rate_low,
49 u8 *prescaler, int portnum);
50static int keyspan_usa19w_calc_baud(struct usb_serial_port *port,
51 u32 baud_rate, u32 baudclk,
52 u8 *rate_hi, u8 *rate_low,
53 u8 *prescaler, int portnum);
54static int keyspan_usa28_calc_baud(struct usb_serial_port *port,
55 u32 baud_rate, u32 baudclk,
56 u8 *rate_hi, u8 *rate_low,
57 u8 *prescaler, int portnum);
58static int keyspan_usa19hs_calc_baud(struct usb_serial_port *port,
59 u32 baud_rate, u32 baudclk,
60 u8 *rate_hi, u8 *rate_low,
61 u8 *prescaler, int portnum);
62
63static int keyspan_usa28_send_setup(struct usb_serial *serial,
64 struct usb_serial_port *port,
65 int reset_port);
66static int keyspan_usa26_send_setup(struct usb_serial *serial,
67 struct usb_serial_port *port,
68 int reset_port);
69static int keyspan_usa49_send_setup(struct usb_serial *serial,
70 struct usb_serial_port *port,
71 int reset_port);
72static int keyspan_usa90_send_setup(struct usb_serial *serial,
73 struct usb_serial_port *port,
74 int reset_port);
75static int keyspan_usa67_send_setup(struct usb_serial *serial,
76 struct usb_serial_port *port,
77 int reset_port);
78
79/* Values used for baud rate calculation - device specific */
80#define KEYSPAN_INVALID_BAUD_RATE (-1)
81#define KEYSPAN_BAUD_RATE_OK (0)
82#define KEYSPAN_USA18X_BAUDCLK (12000000L) /* a guess */
83#define KEYSPAN_USA19_BAUDCLK (12000000L)
84#define KEYSPAN_USA19W_BAUDCLK (24000000L)
85#define KEYSPAN_USA19HS_BAUDCLK (14769231L)
86#define KEYSPAN_USA28_BAUDCLK (1843200L)
87#define KEYSPAN_USA28X_BAUDCLK (12000000L)
88#define KEYSPAN_USA49W_BAUDCLK (48000000L)
89
90/* Some constants used to characterise each device. */
91#define KEYSPAN_MAX_NUM_PORTS (4)
92#define KEYSPAN_MAX_FLIPS (2)
93
94/*
95 * Device info for the Keyspan serial converter, used by the overall
96 * usb-serial probe function.
97 */
98#define KEYSPAN_VENDOR_ID (0x06cd)
99
100/* Product IDs for the products supported, pre-renumeration */
101#define keyspan_usa18x_pre_product_id 0x0105
102#define keyspan_usa19_pre_product_id 0x0103
103#define keyspan_usa19qi_pre_product_id 0x010b
104#define keyspan_mpr_pre_product_id 0x011b
105#define keyspan_usa19qw_pre_product_id 0x0118
106#define keyspan_usa19w_pre_product_id 0x0106
107#define keyspan_usa28_pre_product_id 0x0101
108#define keyspan_usa28x_pre_product_id 0x0102
109#define keyspan_usa28xa_pre_product_id 0x0114
110#define keyspan_usa28xb_pre_product_id 0x0113
111#define keyspan_usa49w_pre_product_id 0x0109
112#define keyspan_usa49wlc_pre_product_id 0x011a
113
114/*
115 * Product IDs post-renumeration. Note that the 28x and 28xb have the same
116 * id's post-renumeration but behave identically so it's not an issue. As
117 * such, the 28xb is not listed in any of the device tables.
118 */
119#define keyspan_usa18x_product_id 0x0112
120#define keyspan_usa19_product_id 0x0107
121#define keyspan_usa19qi_product_id 0x010c
122#define keyspan_usa19hs_product_id 0x0121
123#define keyspan_mpr_product_id 0x011c
124#define keyspan_usa19qw_product_id 0x0119
125#define keyspan_usa19w_product_id 0x0108
126#define keyspan_usa28_product_id 0x010f
127#define keyspan_usa28x_product_id 0x0110
128#define keyspan_usa28xa_product_id 0x0115
129#define keyspan_usa28xb_product_id 0x0110
130#define keyspan_usa28xg_product_id 0x0135
131#define keyspan_usa49w_product_id 0x010a
132#define keyspan_usa49wlc_product_id 0x012a
133#define keyspan_usa49wg_product_id 0x0131
134
135struct keyspan_device_details {
136 /* product ID value */
137 int product_id;
138
139 enum {msg_usa26, msg_usa28, msg_usa49, msg_usa90, msg_usa67} msg_format;
140
141 /* Number of physical ports */
142 int num_ports;
143
144 /* 1 if endpoint flipping used on input, 0 if not */
145 int indat_endp_flip;
146
147 /* 1 if endpoint flipping used on output, 0 if not */
148 int outdat_endp_flip;
149
150 /*
151 * Table mapping input data endpoint IDs to physical port
152 * number and flip if used
153 */
154 int indat_endpoints[KEYSPAN_MAX_NUM_PORTS];
155
156 /* Same for output endpoints */
157 int outdat_endpoints[KEYSPAN_MAX_NUM_PORTS];
158
159 /* Input acknowledge endpoints */
160 int inack_endpoints[KEYSPAN_MAX_NUM_PORTS];
161
162 /* Output control endpoints */
163 int outcont_endpoints[KEYSPAN_MAX_NUM_PORTS];
164
165 /* Endpoint used for input status */
166 int instat_endpoint;
167
168 /* Endpoint used for input data 49WG only */
169 int indat_endpoint;
170
171 /* Endpoint used for global control functions */
172 int glocont_endpoint;
173
174 int (*calculate_baud_rate)(struct usb_serial_port *port,
175 u32 baud_rate, u32 baudclk,
176 u8 *rate_hi, u8 *rate_low, u8 *prescaler,
177 int portnum);
178 u32 baudclk;
179};
180
181/*
182 * Now for each device type we setup the device detail structure with the
183 * appropriate information (provided in Keyspan's documentation)
184 */
185
186static const struct keyspan_device_details usa18x_device_details = {
187 .product_id = keyspan_usa18x_product_id,
188 .msg_format = msg_usa26,
189 .num_ports = 1,
190 .indat_endp_flip = 0,
191 .outdat_endp_flip = 1,
192 .indat_endpoints = {0x81},
193 .outdat_endpoints = {0x01},
194 .inack_endpoints = {0x85},
195 .outcont_endpoints = {0x05},
196 .instat_endpoint = 0x87,
197 .indat_endpoint = -1,
198 .glocont_endpoint = 0x07,
199 .calculate_baud_rate = keyspan_usa19w_calc_baud,
200 .baudclk = KEYSPAN_USA18X_BAUDCLK,
201};
202
203static const struct keyspan_device_details usa19_device_details = {
204 .product_id = keyspan_usa19_product_id,
205 .msg_format = msg_usa28,
206 .num_ports = 1,
207 .indat_endp_flip = 1,
208 .outdat_endp_flip = 1,
209 .indat_endpoints = {0x81},
210 .outdat_endpoints = {0x01},
211 .inack_endpoints = {0x83},
212 .outcont_endpoints = {0x03},
213 .instat_endpoint = 0x84,
214 .indat_endpoint = -1,
215 .glocont_endpoint = -1,
216 .calculate_baud_rate = keyspan_usa19_calc_baud,
217 .baudclk = KEYSPAN_USA19_BAUDCLK,
218};
219
220static const struct keyspan_device_details usa19qi_device_details = {
221 .product_id = keyspan_usa19qi_product_id,
222 .msg_format = msg_usa28,
223 .num_ports = 1,
224 .indat_endp_flip = 1,
225 .outdat_endp_flip = 1,
226 .indat_endpoints = {0x81},
227 .outdat_endpoints = {0x01},
228 .inack_endpoints = {0x83},
229 .outcont_endpoints = {0x03},
230 .instat_endpoint = 0x84,
231 .indat_endpoint = -1,
232 .glocont_endpoint = -1,
233 .calculate_baud_rate = keyspan_usa28_calc_baud,
234 .baudclk = KEYSPAN_USA19_BAUDCLK,
235};
236
237static const struct keyspan_device_details mpr_device_details = {
238 .product_id = keyspan_mpr_product_id,
239 .msg_format = msg_usa28,
240 .num_ports = 1,
241 .indat_endp_flip = 1,
242 .outdat_endp_flip = 1,
243 .indat_endpoints = {0x81},
244 .outdat_endpoints = {0x01},
245 .inack_endpoints = {0x83},
246 .outcont_endpoints = {0x03},
247 .instat_endpoint = 0x84,
248 .indat_endpoint = -1,
249 .glocont_endpoint = -1,
250 .calculate_baud_rate = keyspan_usa28_calc_baud,
251 .baudclk = KEYSPAN_USA19_BAUDCLK,
252};
253
254static const struct keyspan_device_details usa19qw_device_details = {
255 .product_id = keyspan_usa19qw_product_id,
256 .msg_format = msg_usa26,
257 .num_ports = 1,
258 .indat_endp_flip = 0,
259 .outdat_endp_flip = 1,
260 .indat_endpoints = {0x81},
261 .outdat_endpoints = {0x01},
262 .inack_endpoints = {0x85},
263 .outcont_endpoints = {0x05},
264 .instat_endpoint = 0x87,
265 .indat_endpoint = -1,
266 .glocont_endpoint = 0x07,
267 .calculate_baud_rate = keyspan_usa19w_calc_baud,
268 .baudclk = KEYSPAN_USA19W_BAUDCLK,
269};
270
271static const struct keyspan_device_details usa19w_device_details = {
272 .product_id = keyspan_usa19w_product_id,
273 .msg_format = msg_usa26,
274 .num_ports = 1,
275 .indat_endp_flip = 0,
276 .outdat_endp_flip = 1,
277 .indat_endpoints = {0x81},
278 .outdat_endpoints = {0x01},
279 .inack_endpoints = {0x85},
280 .outcont_endpoints = {0x05},
281 .instat_endpoint = 0x87,
282 .indat_endpoint = -1,
283 .glocont_endpoint = 0x07,
284 .calculate_baud_rate = keyspan_usa19w_calc_baud,
285 .baudclk = KEYSPAN_USA19W_BAUDCLK,
286};
287
288static const struct keyspan_device_details usa19hs_device_details = {
289 .product_id = keyspan_usa19hs_product_id,
290 .msg_format = msg_usa90,
291 .num_ports = 1,
292 .indat_endp_flip = 0,
293 .outdat_endp_flip = 0,
294 .indat_endpoints = {0x81},
295 .outdat_endpoints = {0x01},
296 .inack_endpoints = {-1},
297 .outcont_endpoints = {0x02},
298 .instat_endpoint = 0x82,
299 .indat_endpoint = -1,
300 .glocont_endpoint = -1,
301 .calculate_baud_rate = keyspan_usa19hs_calc_baud,
302 .baudclk = KEYSPAN_USA19HS_BAUDCLK,
303};
304
305static const struct keyspan_device_details usa28_device_details = {
306 .product_id = keyspan_usa28_product_id,
307 .msg_format = msg_usa28,
308 .num_ports = 2,
309 .indat_endp_flip = 1,
310 .outdat_endp_flip = 1,
311 .indat_endpoints = {0x81, 0x83},
312 .outdat_endpoints = {0x01, 0x03},
313 .inack_endpoints = {0x85, 0x86},
314 .outcont_endpoints = {0x05, 0x06},
315 .instat_endpoint = 0x87,
316 .indat_endpoint = -1,
317 .glocont_endpoint = 0x07,
318 .calculate_baud_rate = keyspan_usa28_calc_baud,
319 .baudclk = KEYSPAN_USA28_BAUDCLK,
320};
321
322static const struct keyspan_device_details usa28x_device_details = {
323 .product_id = keyspan_usa28x_product_id,
324 .msg_format = msg_usa26,
325 .num_ports = 2,
326 .indat_endp_flip = 0,
327 .outdat_endp_flip = 1,
328 .indat_endpoints = {0x81, 0x83},
329 .outdat_endpoints = {0x01, 0x03},
330 .inack_endpoints = {0x85, 0x86},
331 .outcont_endpoints = {0x05, 0x06},
332 .instat_endpoint = 0x87,
333 .indat_endpoint = -1,
334 .glocont_endpoint = 0x07,
335 .calculate_baud_rate = keyspan_usa19w_calc_baud,
336 .baudclk = KEYSPAN_USA28X_BAUDCLK,
337};
338
339static const struct keyspan_device_details usa28xa_device_details = {
340 .product_id = keyspan_usa28xa_product_id,
341 .msg_format = msg_usa26,
342 .num_ports = 2,
343 .indat_endp_flip = 0,
344 .outdat_endp_flip = 1,
345 .indat_endpoints = {0x81, 0x83},
346 .outdat_endpoints = {0x01, 0x03},
347 .inack_endpoints = {0x85, 0x86},
348 .outcont_endpoints = {0x05, 0x06},
349 .instat_endpoint = 0x87,
350 .indat_endpoint = -1,
351 .glocont_endpoint = 0x07,
352 .calculate_baud_rate = keyspan_usa19w_calc_baud,
353 .baudclk = KEYSPAN_USA28X_BAUDCLK,
354};
355
356static const struct keyspan_device_details usa28xg_device_details = {
357 .product_id = keyspan_usa28xg_product_id,
358 .msg_format = msg_usa67,
359 .num_ports = 2,
360 .indat_endp_flip = 0,
361 .outdat_endp_flip = 0,
362 .indat_endpoints = {0x84, 0x88},
363 .outdat_endpoints = {0x02, 0x06},
364 .inack_endpoints = {-1, -1},
365 .outcont_endpoints = {-1, -1},
366 .instat_endpoint = 0x81,
367 .indat_endpoint = -1,
368 .glocont_endpoint = 0x01,
369 .calculate_baud_rate = keyspan_usa19w_calc_baud,
370 .baudclk = KEYSPAN_USA28X_BAUDCLK,
371};
372/*
373 * We don't need a separate entry for the usa28xb as it appears as a 28x
374 * anyway.
375 */
376
377static const struct keyspan_device_details usa49w_device_details = {
378 .product_id = keyspan_usa49w_product_id,
379 .msg_format = msg_usa49,
380 .num_ports = 4,
381 .indat_endp_flip = 0,
382 .outdat_endp_flip = 0,
383 .indat_endpoints = {0x81, 0x82, 0x83, 0x84},
384 .outdat_endpoints = {0x01, 0x02, 0x03, 0x04},
385 .inack_endpoints = {-1, -1, -1, -1},
386 .outcont_endpoints = {-1, -1, -1, -1},
387 .instat_endpoint = 0x87,
388 .indat_endpoint = -1,
389 .glocont_endpoint = 0x07,
390 .calculate_baud_rate = keyspan_usa19w_calc_baud,
391 .baudclk = KEYSPAN_USA49W_BAUDCLK,
392};
393
394static const struct keyspan_device_details usa49wlc_device_details = {
395 .product_id = keyspan_usa49wlc_product_id,
396 .msg_format = msg_usa49,
397 .num_ports = 4,
398 .indat_endp_flip = 0,
399 .outdat_endp_flip = 0,
400 .indat_endpoints = {0x81, 0x82, 0x83, 0x84},
401 .outdat_endpoints = {0x01, 0x02, 0x03, 0x04},
402 .inack_endpoints = {-1, -1, -1, -1},
403 .outcont_endpoints = {-1, -1, -1, -1},
404 .instat_endpoint = 0x87,
405 .indat_endpoint = -1,
406 .glocont_endpoint = 0x07,
407 .calculate_baud_rate = keyspan_usa19w_calc_baud,
408 .baudclk = KEYSPAN_USA19W_BAUDCLK,
409};
410
411static const struct keyspan_device_details usa49wg_device_details = {
412 .product_id = keyspan_usa49wg_product_id,
413 .msg_format = msg_usa49,
414 .num_ports = 4,
415 .indat_endp_flip = 0,
416 .outdat_endp_flip = 0,
417 .indat_endpoints = {-1, -1, -1, -1}, /* single 'global' data in EP */
418 .outdat_endpoints = {0x01, 0x02, 0x04, 0x06},
419 .inack_endpoints = {-1, -1, -1, -1},
420 .outcont_endpoints = {-1, -1, -1, -1},
421 .instat_endpoint = 0x81,
422 .indat_endpoint = 0x88,
423 .glocont_endpoint = 0x00, /* uses control EP */
424 .calculate_baud_rate = keyspan_usa19w_calc_baud,
425 .baudclk = KEYSPAN_USA19W_BAUDCLK,
426};
427
428static const struct keyspan_device_details *keyspan_devices[] = {
429 &usa18x_device_details,
430 &usa19_device_details,
431 &usa19qi_device_details,
432 &mpr_device_details,
433 &usa19qw_device_details,
434 &usa19w_device_details,
435 &usa19hs_device_details,
436 &usa28_device_details,
437 &usa28x_device_details,
438 &usa28xa_device_details,
439 &usa28xg_device_details,
440 /* 28xb not required as it renumerates as a 28x */
441 &usa49w_device_details,
442 &usa49wlc_device_details,
443 &usa49wg_device_details,
444 NULL,
445};
446
447static const struct usb_device_id keyspan_ids_combined[] = {
448 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) },
449 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) },
450 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) },
451 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) },
452 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_pre_product_id) },
453 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_pre_product_id) },
454 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_pre_product_id) },
455 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_pre_product_id) },
456 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_pre_product_id) },
457 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_pre_product_id) },
458 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_pre_product_id) },
459 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_pre_product_id) },
460 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) },
461 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) },
462 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_product_id) },
463 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) },
464 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_product_id) },
465 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19hs_product_id) },
466 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_product_id) },
467 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
468 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
469 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
470 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) },
471 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id)},
472 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
473 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)},
474 { } /* Terminating entry */
475};
476
477MODULE_DEVICE_TABLE(usb, keyspan_ids_combined);
478
479/* usb_device_id table for the pre-firmware download keyspan devices */
480static const struct usb_device_id keyspan_pre_ids[] = {
481 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) },
482 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) },
483 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) },
484 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_pre_product_id) },
485 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) },
486 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_pre_product_id) },
487 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_pre_product_id) },
488 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_pre_product_id) },
489 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_pre_product_id) },
490 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_pre_product_id) },
491 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_pre_product_id) },
492 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_pre_product_id) },
493 { } /* Terminating entry */
494};
495
496static const struct usb_device_id keyspan_1port_ids[] = {
497 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) },
498 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) },
499 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) },
500 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_product_id) },
501 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_product_id) },
502 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19hs_product_id) },
503 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_product_id) },
504 { } /* Terminating entry */
505};
506
507static const struct usb_device_id keyspan_2port_ids[] = {
508 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
509 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
510 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
511 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) },
512 { } /* Terminating entry */
513};
514
515static const struct usb_device_id keyspan_4port_ids[] = {
516 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id) },
517 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
518 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)},
519 { } /* Terminating entry */
520};
521
522#define INSTAT_BUFLEN 32
523#define GLOCONT_BUFLEN 64
524#define INDAT49W_BUFLEN 512
525#define IN_BUFLEN 64
526#define OUT_BUFLEN 64
527#define INACK_BUFLEN 1
528#define OUTCONT_BUFLEN 64
529
530 /* Per device and per port private data */
531struct keyspan_serial_private {
532 const struct keyspan_device_details *device_details;
533
534 struct urb *instat_urb;
535 char *instat_buf;
536
537 /* added to support 49wg, where data from all 4 ports comes in
538 on 1 EP and high-speed supported */
539 struct urb *indat_urb;
540 char *indat_buf;
541
542 /* XXX this one probably will need a lock */
543 struct urb *glocont_urb;
544 char *glocont_buf;
545 char *ctrl_buf; /* for EP0 control message */
546};
547
548struct keyspan_port_private {
549 /* Keep track of which input & output endpoints to use */
550 int in_flip;
551 int out_flip;
552
553 /* Keep duplicate of device details in each port
554 structure as well - simplifies some of the
555 callback functions etc. */
556 const struct keyspan_device_details *device_details;
557
558 /* Input endpoints and buffer for this port */
559 struct urb *in_urbs[2];
560 char *in_buffer[2];
561 /* Output endpoints and buffer for this port */
562 struct urb *out_urbs[2];
563 char *out_buffer[2];
564
565 /* Input ack endpoint */
566 struct urb *inack_urb;
567 char *inack_buffer;
568
569 /* Output control endpoint */
570 struct urb *outcont_urb;
571 char *outcont_buffer;
572
573 /* Settings for the port */
574 int baud;
575 int old_baud;
576 unsigned int cflag;
577 unsigned int old_cflag;
578 enum {flow_none, flow_cts, flow_xon} flow_control;
579 int rts_state; /* Handshaking pins (outputs) */
580 int dtr_state;
581 int cts_state; /* Handshaking pins (inputs) */
582 int dsr_state;
583 int dcd_state;
584 int ri_state;
585 int break_on;
586
587 unsigned long tx_start_time[2];
588 int resend_cont; /* need to resend control packet */
589};
590
591/* Include Keyspan message headers. All current Keyspan Adapters
592 make use of one of five message formats which are referred
593 to as USA-26, USA-28, USA-49, USA-90, USA-67 by Keyspan and
594 within this driver. */
595#include "keyspan_usa26msg.h"
596#include "keyspan_usa28msg.h"
597#include "keyspan_usa49msg.h"
598#include "keyspan_usa90msg.h"
599#include "keyspan_usa67msg.h"
600
601
602static int keyspan_break_ctl(struct tty_struct *tty, int break_state)
603{
604 struct usb_serial_port *port = tty->driver_data;
605 struct keyspan_port_private *p_priv;
606
607 p_priv = usb_get_serial_port_data(port);
608
609 if (break_state == -1)
610 p_priv->break_on = 1;
611 else
612 p_priv->break_on = 0;
613
614 /* FIXME: return errors */
615 keyspan_send_setup(port, 0);
616
617 return 0;
618}
619
620
621static void keyspan_set_termios(struct tty_struct *tty,
622 struct usb_serial_port *port,
623 const struct ktermios *old_termios)
624{
625 int baud_rate, device_port;
626 struct keyspan_port_private *p_priv;
627 const struct keyspan_device_details *d_details;
628 unsigned int cflag;
629
630 p_priv = usb_get_serial_port_data(port);
631 d_details = p_priv->device_details;
632 cflag = tty->termios.c_cflag;
633 device_port = port->port_number;
634
635 /* Baud rate calculation takes baud rate as an integer
636 so other rates can be generated if desired. */
637 baud_rate = tty_get_baud_rate(tty);
638 /* If no match or invalid, don't change */
639 if (d_details->calculate_baud_rate(port, baud_rate, d_details->baudclk,
640 NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) {
641 /* FIXME - more to do here to ensure rate changes cleanly */
642 /* FIXME - calculate exact rate from divisor ? */
643 p_priv->baud = baud_rate;
644 } else
645 baud_rate = tty_termios_baud_rate(old_termios);
646
647 tty_encode_baud_rate(tty, baud_rate, baud_rate);
648 /* set CTS/RTS handshake etc. */
649 p_priv->cflag = cflag;
650 p_priv->flow_control = (cflag & CRTSCTS) ? flow_cts : flow_none;
651
652 /* Mark/Space not supported */
653 tty->termios.c_cflag &= ~CMSPAR;
654
655 keyspan_send_setup(port, 0);
656}
657
658static int keyspan_tiocmget(struct tty_struct *tty)
659{
660 struct usb_serial_port *port = tty->driver_data;
661 struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);
662 unsigned int value;
663
664 value = ((p_priv->rts_state) ? TIOCM_RTS : 0) |
665 ((p_priv->dtr_state) ? TIOCM_DTR : 0) |
666 ((p_priv->cts_state) ? TIOCM_CTS : 0) |
667 ((p_priv->dsr_state) ? TIOCM_DSR : 0) |
668 ((p_priv->dcd_state) ? TIOCM_CAR : 0) |
669 ((p_priv->ri_state) ? TIOCM_RNG : 0);
670
671 return value;
672}
673
674static int keyspan_tiocmset(struct tty_struct *tty,
675 unsigned int set, unsigned int clear)
676{
677 struct usb_serial_port *port = tty->driver_data;
678 struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);
679
680 if (set & TIOCM_RTS)
681 p_priv->rts_state = 1;
682 if (set & TIOCM_DTR)
683 p_priv->dtr_state = 1;
684 if (clear & TIOCM_RTS)
685 p_priv->rts_state = 0;
686 if (clear & TIOCM_DTR)
687 p_priv->dtr_state = 0;
688 keyspan_send_setup(port, 0);
689 return 0;
690}
691
692/* Write function is similar for the four protocols used
693 with only a minor change for usa90 (usa19hs) required */
694static int keyspan_write(struct tty_struct *tty,
695 struct usb_serial_port *port, const unsigned char *buf, int count)
696{
697 struct keyspan_port_private *p_priv;
698 const struct keyspan_device_details *d_details;
699 int flip;
700 int left, todo;
701 struct urb *this_urb;
702 int err, maxDataLen, dataOffset;
703
704 p_priv = usb_get_serial_port_data(port);
705 d_details = p_priv->device_details;
706
707 if (d_details->msg_format == msg_usa90) {
708 maxDataLen = 64;
709 dataOffset = 0;
710 } else {
711 maxDataLen = 63;
712 dataOffset = 1;
713 }
714
715 dev_dbg(&port->dev, "%s - %d chars, flip=%d\n", __func__, count,
716 p_priv->out_flip);
717
718 for (left = count; left > 0; left -= todo) {
719 todo = left;
720 if (todo > maxDataLen)
721 todo = maxDataLen;
722
723 flip = p_priv->out_flip;
724
725 /* Check we have a valid urb/endpoint before we use it... */
726 this_urb = p_priv->out_urbs[flip];
727 if (this_urb == NULL) {
728 /* no bulk out, so return 0 bytes written */
729 dev_dbg(&port->dev, "%s - no output urb :(\n", __func__);
730 return count;
731 }
732
733 dev_dbg(&port->dev, "%s - endpoint %x flip %d\n",
734 __func__, usb_pipeendpoint(this_urb->pipe), flip);
735
736 if (this_urb->status == -EINPROGRESS) {
737 if (time_before(jiffies,
738 p_priv->tx_start_time[flip] + 10 * HZ))
739 break;
740 usb_unlink_urb(this_urb);
741 break;
742 }
743
744 /* First byte in buffer is "last flag" (except for usa19hx)
745 - unused so for now so set to zero */
746 ((char *)this_urb->transfer_buffer)[0] = 0;
747
748 memcpy(this_urb->transfer_buffer + dataOffset, buf, todo);
749 buf += todo;
750
751 /* send the data out the bulk port */
752 this_urb->transfer_buffer_length = todo + dataOffset;
753
754 err = usb_submit_urb(this_urb, GFP_ATOMIC);
755 if (err != 0)
756 dev_dbg(&port->dev, "usb_submit_urb(write bulk) failed (%d)\n", err);
757 p_priv->tx_start_time[flip] = jiffies;
758
759 /* Flip for next time if usa26 or usa28 interface
760 (not used on usa49) */
761 p_priv->out_flip = (flip + 1) & d_details->outdat_endp_flip;
762 }
763
764 return count - left;
765}
766
767static void usa26_indat_callback(struct urb *urb)
768{
769 int i, err;
770 int endpoint;
771 struct usb_serial_port *port;
772 unsigned char *data = urb->transfer_buffer;
773 int status = urb->status;
774
775 endpoint = usb_pipeendpoint(urb->pipe);
776
777 if (status) {
778 dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n",
779 __func__, status, endpoint);
780 return;
781 }
782
783 port = urb->context;
784 if (urb->actual_length) {
785 /* 0x80 bit is error flag */
786 if ((data[0] & 0x80) == 0) {
787 /* no errors on individual bytes, only
788 possible overrun err */
789 if (data[0] & RXERROR_OVERRUN) {
790 tty_insert_flip_char(&port->port, 0,
791 TTY_OVERRUN);
792 }
793 for (i = 1; i < urb->actual_length ; ++i)
794 tty_insert_flip_char(&port->port, data[i],
795 TTY_NORMAL);
796 } else {
797 /* some bytes had errors, every byte has status */
798 dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__);
799 for (i = 0; i + 1 < urb->actual_length; i += 2) {
800 int stat = data[i];
801 int flag = TTY_NORMAL;
802
803 if (stat & RXERROR_OVERRUN) {
804 tty_insert_flip_char(&port->port, 0,
805 TTY_OVERRUN);
806 }
807 /* XXX should handle break (0x10) */
808 if (stat & RXERROR_PARITY)
809 flag = TTY_PARITY;
810 else if (stat & RXERROR_FRAMING)
811 flag = TTY_FRAME;
812
813 tty_insert_flip_char(&port->port, data[i+1],
814 flag);
815 }
816 }
817 tty_flip_buffer_push(&port->port);
818 }
819
820 /* Resubmit urb so we continue receiving */
821 err = usb_submit_urb(urb, GFP_ATOMIC);
822 if (err != 0)
823 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
824}
825
826/* Outdat handling is common for all devices */
827static void usa2x_outdat_callback(struct urb *urb)
828{
829 struct usb_serial_port *port;
830 struct keyspan_port_private *p_priv;
831
832 port = urb->context;
833 p_priv = usb_get_serial_port_data(port);
834 dev_dbg(&port->dev, "%s - urb %d\n", __func__, urb == p_priv->out_urbs[1]);
835
836 usb_serial_port_softint(port);
837}
838
839static void usa26_inack_callback(struct urb *urb)
840{
841}
842
843static void usa26_outcont_callback(struct urb *urb)
844{
845 struct usb_serial_port *port;
846 struct keyspan_port_private *p_priv;
847
848 port = urb->context;
849 p_priv = usb_get_serial_port_data(port);
850
851 if (p_priv->resend_cont) {
852 dev_dbg(&port->dev, "%s - sending setup\n", __func__);
853 keyspan_usa26_send_setup(port->serial, port,
854 p_priv->resend_cont - 1);
855 }
856}
857
858static void usa26_instat_callback(struct urb *urb)
859{
860 unsigned char *data = urb->transfer_buffer;
861 struct keyspan_usa26_portStatusMessage *msg;
862 struct usb_serial *serial;
863 struct usb_serial_port *port;
864 struct keyspan_port_private *p_priv;
865 int old_dcd_state, err;
866 int status = urb->status;
867
868 serial = urb->context;
869
870 if (status) {
871 dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
872 __func__, status);
873 return;
874 }
875 if (urb->actual_length != 9) {
876 dev_dbg(&urb->dev->dev, "%s - %d byte report??\n", __func__, urb->actual_length);
877 goto exit;
878 }
879
880 msg = (struct keyspan_usa26_portStatusMessage *)data;
881
882 /* Check port number from message and retrieve private data */
883 if (msg->port >= serial->num_ports) {
884 dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port);
885 goto exit;
886 }
887 port = serial->port[msg->port];
888 p_priv = usb_get_serial_port_data(port);
889 if (!p_priv)
890 goto resubmit;
891
892 /* Update handshaking pin state information */
893 old_dcd_state = p_priv->dcd_state;
894 p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0);
895 p_priv->dsr_state = ((msg->dsr) ? 1 : 0);
896 p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0);
897 p_priv->ri_state = ((msg->ri) ? 1 : 0);
898
899 if (old_dcd_state != p_priv->dcd_state)
900 tty_port_tty_hangup(&port->port, true);
901resubmit:
902 /* Resubmit urb so we continue receiving */
903 err = usb_submit_urb(urb, GFP_ATOMIC);
904 if (err != 0)
905 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
906exit: ;
907}
908
909static void usa26_glocont_callback(struct urb *urb)
910{
911}
912
913
914static void usa28_indat_callback(struct urb *urb)
915{
916 int err;
917 struct usb_serial_port *port;
918 unsigned char *data;
919 struct keyspan_port_private *p_priv;
920 int status = urb->status;
921
922 port = urb->context;
923 p_priv = usb_get_serial_port_data(port);
924 data = urb->transfer_buffer;
925
926 if (urb != p_priv->in_urbs[p_priv->in_flip])
927 return;
928
929 do {
930 if (status) {
931 dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n",
932 __func__, status, usb_pipeendpoint(urb->pipe));
933 return;
934 }
935
936 port = urb->context;
937 p_priv = usb_get_serial_port_data(port);
938 data = urb->transfer_buffer;
939
940 if (urb->actual_length) {
941 tty_insert_flip_string(&port->port, data,
942 urb->actual_length);
943 tty_flip_buffer_push(&port->port);
944 }
945
946 /* Resubmit urb so we continue receiving */
947 err = usb_submit_urb(urb, GFP_ATOMIC);
948 if (err != 0)
949 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n",
950 __func__, err);
951 p_priv->in_flip ^= 1;
952
953 urb = p_priv->in_urbs[p_priv->in_flip];
954 } while (urb->status != -EINPROGRESS);
955}
956
957static void usa28_inack_callback(struct urb *urb)
958{
959}
960
961static void usa28_outcont_callback(struct urb *urb)
962{
963 struct usb_serial_port *port;
964 struct keyspan_port_private *p_priv;
965
966 port = urb->context;
967 p_priv = usb_get_serial_port_data(port);
968
969 if (p_priv->resend_cont) {
970 dev_dbg(&port->dev, "%s - sending setup\n", __func__);
971 keyspan_usa28_send_setup(port->serial, port,
972 p_priv->resend_cont - 1);
973 }
974}
975
976static void usa28_instat_callback(struct urb *urb)
977{
978 int err;
979 unsigned char *data = urb->transfer_buffer;
980 struct keyspan_usa28_portStatusMessage *msg;
981 struct usb_serial *serial;
982 struct usb_serial_port *port;
983 struct keyspan_port_private *p_priv;
984 int old_dcd_state;
985 int status = urb->status;
986
987 serial = urb->context;
988
989 if (status) {
990 dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
991 __func__, status);
992 return;
993 }
994
995 if (urb->actual_length != sizeof(struct keyspan_usa28_portStatusMessage)) {
996 dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length);
997 goto exit;
998 }
999
1000 msg = (struct keyspan_usa28_portStatusMessage *)data;
1001
1002 /* Check port number from message and retrieve private data */
1003 if (msg->port >= serial->num_ports) {
1004 dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port);
1005 goto exit;
1006 }
1007 port = serial->port[msg->port];
1008 p_priv = usb_get_serial_port_data(port);
1009 if (!p_priv)
1010 goto resubmit;
1011
1012 /* Update handshaking pin state information */
1013 old_dcd_state = p_priv->dcd_state;
1014 p_priv->cts_state = ((msg->cts) ? 1 : 0);
1015 p_priv->dsr_state = ((msg->dsr) ? 1 : 0);
1016 p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
1017 p_priv->ri_state = ((msg->ri) ? 1 : 0);
1018
1019 if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
1020 tty_port_tty_hangup(&port->port, true);
1021resubmit:
1022 /* Resubmit urb so we continue receiving */
1023 err = usb_submit_urb(urb, GFP_ATOMIC);
1024 if (err != 0)
1025 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
1026exit: ;
1027}
1028
1029static void usa28_glocont_callback(struct urb *urb)
1030{
1031}
1032
1033
1034static void usa49_glocont_callback(struct urb *urb)
1035{
1036 struct usb_serial *serial;
1037 struct usb_serial_port *port;
1038 struct keyspan_port_private *p_priv;
1039 int i;
1040
1041 serial = urb->context;
1042 for (i = 0; i < serial->num_ports; ++i) {
1043 port = serial->port[i];
1044 p_priv = usb_get_serial_port_data(port);
1045 if (!p_priv)
1046 continue;
1047
1048 if (p_priv->resend_cont) {
1049 dev_dbg(&port->dev, "%s - sending setup\n", __func__);
1050 keyspan_usa49_send_setup(serial, port,
1051 p_priv->resend_cont - 1);
1052 break;
1053 }
1054 }
1055}
1056
1057 /* This is actually called glostat in the Keyspan
1058 doco */
1059static void usa49_instat_callback(struct urb *urb)
1060{
1061 int err;
1062 unsigned char *data = urb->transfer_buffer;
1063 struct keyspan_usa49_portStatusMessage *msg;
1064 struct usb_serial *serial;
1065 struct usb_serial_port *port;
1066 struct keyspan_port_private *p_priv;
1067 int old_dcd_state;
1068 int status = urb->status;
1069
1070 serial = urb->context;
1071
1072 if (status) {
1073 dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
1074 __func__, status);
1075 return;
1076 }
1077
1078 if (urb->actual_length !=
1079 sizeof(struct keyspan_usa49_portStatusMessage)) {
1080 dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length);
1081 goto exit;
1082 }
1083
1084 msg = (struct keyspan_usa49_portStatusMessage *)data;
1085
1086 /* Check port number from message and retrieve private data */
1087 if (msg->portNumber >= serial->num_ports) {
1088 dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n",
1089 __func__, msg->portNumber);
1090 goto exit;
1091 }
1092 port = serial->port[msg->portNumber];
1093 p_priv = usb_get_serial_port_data(port);
1094 if (!p_priv)
1095 goto resubmit;
1096
1097 /* Update handshaking pin state information */
1098 old_dcd_state = p_priv->dcd_state;
1099 p_priv->cts_state = ((msg->cts) ? 1 : 0);
1100 p_priv->dsr_state = ((msg->dsr) ? 1 : 0);
1101 p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
1102 p_priv->ri_state = ((msg->ri) ? 1 : 0);
1103
1104 if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
1105 tty_port_tty_hangup(&port->port, true);
1106resubmit:
1107 /* Resubmit urb so we continue receiving */
1108 err = usb_submit_urb(urb, GFP_ATOMIC);
1109 if (err != 0)
1110 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
1111exit: ;
1112}
1113
1114static void usa49_inack_callback(struct urb *urb)
1115{
1116}
1117
1118static void usa49_indat_callback(struct urb *urb)
1119{
1120 int i, err;
1121 int endpoint;
1122 struct usb_serial_port *port;
1123 unsigned char *data = urb->transfer_buffer;
1124 int status = urb->status;
1125
1126 endpoint = usb_pipeendpoint(urb->pipe);
1127
1128 if (status) {
1129 dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n",
1130 __func__, status, endpoint);
1131 return;
1132 }
1133
1134 port = urb->context;
1135 if (urb->actual_length) {
1136 /* 0x80 bit is error flag */
1137 if ((data[0] & 0x80) == 0) {
1138 /* no error on any byte */
1139 tty_insert_flip_string(&port->port, data + 1,
1140 urb->actual_length - 1);
1141 } else {
1142 /* some bytes had errors, every byte has status */
1143 for (i = 0; i + 1 < urb->actual_length; i += 2) {
1144 int stat = data[i];
1145 int flag = TTY_NORMAL;
1146
1147 if (stat & RXERROR_OVERRUN) {
1148 tty_insert_flip_char(&port->port, 0,
1149 TTY_OVERRUN);
1150 }
1151 /* XXX should handle break (0x10) */
1152 if (stat & RXERROR_PARITY)
1153 flag = TTY_PARITY;
1154 else if (stat & RXERROR_FRAMING)
1155 flag = TTY_FRAME;
1156
1157 tty_insert_flip_char(&port->port, data[i+1],
1158 flag);
1159 }
1160 }
1161 tty_flip_buffer_push(&port->port);
1162 }
1163
1164 /* Resubmit urb so we continue receiving */
1165 err = usb_submit_urb(urb, GFP_ATOMIC);
1166 if (err != 0)
1167 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
1168}
1169
1170static void usa49wg_indat_callback(struct urb *urb)
1171{
1172 int i, len, x, err;
1173 struct usb_serial *serial;
1174 struct usb_serial_port *port;
1175 unsigned char *data = urb->transfer_buffer;
1176 int status = urb->status;
1177
1178 serial = urb->context;
1179
1180 if (status) {
1181 dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
1182 __func__, status);
1183 return;
1184 }
1185
1186 /* inbound data is in the form P#, len, status, data */
1187 i = 0;
1188 len = 0;
1189
1190 while (i < urb->actual_length) {
1191
1192 /* Check port number from message */
1193 if (data[i] >= serial->num_ports) {
1194 dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n",
1195 __func__, data[i]);
1196 return;
1197 }
1198 port = serial->port[data[i++]];
1199 len = data[i++];
1200
1201 /* 0x80 bit is error flag */
1202 if ((data[i] & 0x80) == 0) {
1203 /* no error on any byte */
1204 i++;
1205 for (x = 1; x < len && i < urb->actual_length; ++x)
1206 tty_insert_flip_char(&port->port,
1207 data[i++], 0);
1208 } else {
1209 /*
1210 * some bytes had errors, every byte has status
1211 */
1212 for (x = 0; x + 1 < len &&
1213 i + 1 < urb->actual_length; x += 2) {
1214 int stat = data[i];
1215 int flag = TTY_NORMAL;
1216
1217 if (stat & RXERROR_OVERRUN) {
1218 tty_insert_flip_char(&port->port, 0,
1219 TTY_OVERRUN);
1220 }
1221 /* XXX should handle break (0x10) */
1222 if (stat & RXERROR_PARITY)
1223 flag = TTY_PARITY;
1224 else if (stat & RXERROR_FRAMING)
1225 flag = TTY_FRAME;
1226
1227 tty_insert_flip_char(&port->port, data[i+1],
1228 flag);
1229 i += 2;
1230 }
1231 }
1232 tty_flip_buffer_push(&port->port);
1233 }
1234
1235 /* Resubmit urb so we continue receiving */
1236 err = usb_submit_urb(urb, GFP_ATOMIC);
1237 if (err != 0)
1238 dev_dbg(&urb->dev->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
1239}
1240
1241/* not used, usa-49 doesn't have per-port control endpoints */
1242static void usa49_outcont_callback(struct urb *urb)
1243{
1244}
1245
1246static void usa90_indat_callback(struct urb *urb)
1247{
1248 int i, err;
1249 int endpoint;
1250 struct usb_serial_port *port;
1251 struct keyspan_port_private *p_priv;
1252 unsigned char *data = urb->transfer_buffer;
1253 int status = urb->status;
1254
1255 endpoint = usb_pipeendpoint(urb->pipe);
1256
1257 if (status) {
1258 dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n",
1259 __func__, status, endpoint);
1260 return;
1261 }
1262
1263 port = urb->context;
1264 p_priv = usb_get_serial_port_data(port);
1265
1266 if (urb->actual_length) {
1267 /* if current mode is DMA, looks like usa28 format
1268 otherwise looks like usa26 data format */
1269
1270 if (p_priv->baud > 57600)
1271 tty_insert_flip_string(&port->port, data,
1272 urb->actual_length);
1273 else {
1274 /* 0x80 bit is error flag */
1275 if ((data[0] & 0x80) == 0) {
1276 /* no errors on individual bytes, only
1277 possible overrun err*/
1278 if (data[0] & RXERROR_OVERRUN) {
1279 tty_insert_flip_char(&port->port, 0,
1280 TTY_OVERRUN);
1281 }
1282 for (i = 1; i < urb->actual_length ; ++i)
1283 tty_insert_flip_char(&port->port,
1284 data[i], TTY_NORMAL);
1285 } else {
1286 /* some bytes had errors, every byte has status */
1287 dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__);
1288 for (i = 0; i + 1 < urb->actual_length; i += 2) {
1289 int stat = data[i];
1290 int flag = TTY_NORMAL;
1291
1292 if (stat & RXERROR_OVERRUN) {
1293 tty_insert_flip_char(
1294 &port->port, 0,
1295 TTY_OVERRUN);
1296 }
1297 /* XXX should handle break (0x10) */
1298 if (stat & RXERROR_PARITY)
1299 flag = TTY_PARITY;
1300 else if (stat & RXERROR_FRAMING)
1301 flag = TTY_FRAME;
1302
1303 tty_insert_flip_char(&port->port,
1304 data[i+1], flag);
1305 }
1306 }
1307 }
1308 tty_flip_buffer_push(&port->port);
1309 }
1310
1311 /* Resubmit urb so we continue receiving */
1312 err = usb_submit_urb(urb, GFP_ATOMIC);
1313 if (err != 0)
1314 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
1315}
1316
1317
1318static void usa90_instat_callback(struct urb *urb)
1319{
1320 unsigned char *data = urb->transfer_buffer;
1321 struct keyspan_usa90_portStatusMessage *msg;
1322 struct usb_serial *serial;
1323 struct usb_serial_port *port;
1324 struct keyspan_port_private *p_priv;
1325 int old_dcd_state, err;
1326 int status = urb->status;
1327
1328 serial = urb->context;
1329
1330 if (status) {
1331 dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
1332 __func__, status);
1333 return;
1334 }
1335 if (urb->actual_length < 14) {
1336 dev_dbg(&urb->dev->dev, "%s - %d byte report??\n", __func__, urb->actual_length);
1337 goto exit;
1338 }
1339
1340 msg = (struct keyspan_usa90_portStatusMessage *)data;
1341
1342 /* Now do something useful with the data */
1343
1344 port = serial->port[0];
1345 p_priv = usb_get_serial_port_data(port);
1346 if (!p_priv)
1347 goto resubmit;
1348
1349 /* Update handshaking pin state information */
1350 old_dcd_state = p_priv->dcd_state;
1351 p_priv->cts_state = ((msg->cts) ? 1 : 0);
1352 p_priv->dsr_state = ((msg->dsr) ? 1 : 0);
1353 p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
1354 p_priv->ri_state = ((msg->ri) ? 1 : 0);
1355
1356 if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
1357 tty_port_tty_hangup(&port->port, true);
1358resubmit:
1359 /* Resubmit urb so we continue receiving */
1360 err = usb_submit_urb(urb, GFP_ATOMIC);
1361 if (err != 0)
1362 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
1363exit:
1364 ;
1365}
1366
1367static void usa90_outcont_callback(struct urb *urb)
1368{
1369 struct usb_serial_port *port;
1370 struct keyspan_port_private *p_priv;
1371
1372 port = urb->context;
1373 p_priv = usb_get_serial_port_data(port);
1374
1375 if (p_priv->resend_cont) {
1376 dev_dbg(&urb->dev->dev, "%s - sending setup\n", __func__);
1377 keyspan_usa90_send_setup(port->serial, port,
1378 p_priv->resend_cont - 1);
1379 }
1380}
1381
1382/* Status messages from the 28xg */
1383static void usa67_instat_callback(struct urb *urb)
1384{
1385 int err;
1386 unsigned char *data = urb->transfer_buffer;
1387 struct keyspan_usa67_portStatusMessage *msg;
1388 struct usb_serial *serial;
1389 struct usb_serial_port *port;
1390 struct keyspan_port_private *p_priv;
1391 int old_dcd_state;
1392 int status = urb->status;
1393
1394 serial = urb->context;
1395
1396 if (status) {
1397 dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
1398 __func__, status);
1399 return;
1400 }
1401
1402 if (urb->actual_length !=
1403 sizeof(struct keyspan_usa67_portStatusMessage)) {
1404 dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length);
1405 return;
1406 }
1407
1408
1409 /* Now do something useful with the data */
1410 msg = (struct keyspan_usa67_portStatusMessage *)data;
1411
1412 /* Check port number from message and retrieve private data */
1413 if (msg->port >= serial->num_ports) {
1414 dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port);
1415 return;
1416 }
1417
1418 port = serial->port[msg->port];
1419 p_priv = usb_get_serial_port_data(port);
1420 if (!p_priv)
1421 goto resubmit;
1422
1423 /* Update handshaking pin state information */
1424 old_dcd_state = p_priv->dcd_state;
1425 p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0);
1426 p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0);
1427
1428 if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
1429 tty_port_tty_hangup(&port->port, true);
1430resubmit:
1431 /* Resubmit urb so we continue receiving */
1432 err = usb_submit_urb(urb, GFP_ATOMIC);
1433 if (err != 0)
1434 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
1435}
1436
1437static void usa67_glocont_callback(struct urb *urb)
1438{
1439 struct usb_serial *serial;
1440 struct usb_serial_port *port;
1441 struct keyspan_port_private *p_priv;
1442 int i;
1443
1444 serial = urb->context;
1445 for (i = 0; i < serial->num_ports; ++i) {
1446 port = serial->port[i];
1447 p_priv = usb_get_serial_port_data(port);
1448 if (!p_priv)
1449 continue;
1450
1451 if (p_priv->resend_cont) {
1452 dev_dbg(&port->dev, "%s - sending setup\n", __func__);
1453 keyspan_usa67_send_setup(serial, port,
1454 p_priv->resend_cont - 1);
1455 break;
1456 }
1457 }
1458}
1459
1460static unsigned int keyspan_write_room(struct tty_struct *tty)
1461{
1462 struct usb_serial_port *port = tty->driver_data;
1463 struct keyspan_port_private *p_priv;
1464 const struct keyspan_device_details *d_details;
1465 int flip;
1466 unsigned int data_len;
1467 struct urb *this_urb;
1468
1469 p_priv = usb_get_serial_port_data(port);
1470 d_details = p_priv->device_details;
1471
1472 /* FIXME: locking */
1473 if (d_details->msg_format == msg_usa90)
1474 data_len = 64;
1475 else
1476 data_len = 63;
1477
1478 flip = p_priv->out_flip;
1479
1480 /* Check both endpoints to see if any are available. */
1481 this_urb = p_priv->out_urbs[flip];
1482 if (this_urb != NULL) {
1483 if (this_urb->status != -EINPROGRESS)
1484 return data_len;
1485 flip = (flip + 1) & d_details->outdat_endp_flip;
1486 this_urb = p_priv->out_urbs[flip];
1487 if (this_urb != NULL) {
1488 if (this_urb->status != -EINPROGRESS)
1489 return data_len;
1490 }
1491 }
1492 return 0;
1493}
1494
1495
1496static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port)
1497{
1498 struct keyspan_port_private *p_priv;
1499 const struct keyspan_device_details *d_details;
1500 int i, err;
1501 int baud_rate, device_port;
1502 struct urb *urb;
1503 unsigned int cflag = 0;
1504
1505 p_priv = usb_get_serial_port_data(port);
1506 d_details = p_priv->device_details;
1507
1508 /* Set some sane defaults */
1509 p_priv->rts_state = 1;
1510 p_priv->dtr_state = 1;
1511 p_priv->baud = 9600;
1512
1513 /* force baud and lcr to be set on open */
1514 p_priv->old_baud = 0;
1515 p_priv->old_cflag = 0;
1516
1517 p_priv->out_flip = 0;
1518 p_priv->in_flip = 0;
1519
1520 /* Reset low level data toggle and start reading from endpoints */
1521 for (i = 0; i < 2; i++) {
1522 urb = p_priv->in_urbs[i];
1523 if (urb == NULL)
1524 continue;
1525
1526 /* make sure endpoint data toggle is synchronized
1527 with the device */
1528 usb_clear_halt(urb->dev, urb->pipe);
1529 err = usb_submit_urb(urb, GFP_KERNEL);
1530 if (err != 0)
1531 dev_dbg(&port->dev, "%s - submit urb %d failed (%d)\n", __func__, i, err);
1532 }
1533
1534 /* Reset low level data toggle on out endpoints */
1535 for (i = 0; i < 2; i++) {
1536 urb = p_priv->out_urbs[i];
1537 if (urb == NULL)
1538 continue;
1539 /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
1540 usb_pipeout(urb->pipe), 0); */
1541 }
1542
1543 /* get the terminal config for the setup message now so we don't
1544 * need to send 2 of them */
1545
1546 device_port = port->port_number;
1547 if (tty) {
1548 cflag = tty->termios.c_cflag;
1549 /* Baud rate calculation takes baud rate as an integer
1550 so other rates can be generated if desired. */
1551 baud_rate = tty_get_baud_rate(tty);
1552 /* If no match or invalid, leave as default */
1553 if (baud_rate >= 0
1554 && d_details->calculate_baud_rate(port, baud_rate, d_details->baudclk,
1555 NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) {
1556 p_priv->baud = baud_rate;
1557 }
1558 }
1559 /* set CTS/RTS handshake etc. */
1560 p_priv->cflag = cflag;
1561 p_priv->flow_control = (cflag & CRTSCTS) ? flow_cts : flow_none;
1562
1563 keyspan_send_setup(port, 1);
1564 /* mdelay(100); */
1565 /* keyspan_set_termios(port, NULL); */
1566
1567 return 0;
1568}
1569
1570static void keyspan_dtr_rts(struct usb_serial_port *port, int on)
1571{
1572 struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);
1573
1574 p_priv->rts_state = on;
1575 p_priv->dtr_state = on;
1576 keyspan_send_setup(port, 0);
1577}
1578
1579static void keyspan_close(struct usb_serial_port *port)
1580{
1581 int i;
1582 struct keyspan_port_private *p_priv;
1583
1584 p_priv = usb_get_serial_port_data(port);
1585
1586 p_priv->rts_state = 0;
1587 p_priv->dtr_state = 0;
1588
1589 keyspan_send_setup(port, 2);
1590 /* pilot-xfer seems to work best with this delay */
1591 mdelay(100);
1592
1593 p_priv->out_flip = 0;
1594 p_priv->in_flip = 0;
1595
1596 usb_kill_urb(p_priv->inack_urb);
1597 for (i = 0; i < 2; i++) {
1598 usb_kill_urb(p_priv->in_urbs[i]);
1599 usb_kill_urb(p_priv->out_urbs[i]);
1600 }
1601}
1602
1603/* download the firmware to a pre-renumeration device */
1604static int keyspan_fake_startup(struct usb_serial *serial)
1605{
1606 char *fw_name;
1607
1608 dev_dbg(&serial->dev->dev, "Keyspan startup version %04x product %04x\n",
1609 le16_to_cpu(serial->dev->descriptor.bcdDevice),
1610 le16_to_cpu(serial->dev->descriptor.idProduct));
1611
1612 if ((le16_to_cpu(serial->dev->descriptor.bcdDevice) & 0x8000)
1613 != 0x8000) {
1614 dev_dbg(&serial->dev->dev, "Firmware already loaded. Quitting.\n");
1615 return 1;
1616 }
1617
1618 /* Select firmware image on the basis of idProduct */
1619 switch (le16_to_cpu(serial->dev->descriptor.idProduct)) {
1620 case keyspan_usa28_pre_product_id:
1621 fw_name = "keyspan/usa28.fw";
1622 break;
1623
1624 case keyspan_usa28x_pre_product_id:
1625 fw_name = "keyspan/usa28x.fw";
1626 break;
1627
1628 case keyspan_usa28xa_pre_product_id:
1629 fw_name = "keyspan/usa28xa.fw";
1630 break;
1631
1632 case keyspan_usa28xb_pre_product_id:
1633 fw_name = "keyspan/usa28xb.fw";
1634 break;
1635
1636 case keyspan_usa19_pre_product_id:
1637 fw_name = "keyspan/usa19.fw";
1638 break;
1639
1640 case keyspan_usa19qi_pre_product_id:
1641 fw_name = "keyspan/usa19qi.fw";
1642 break;
1643
1644 case keyspan_mpr_pre_product_id:
1645 fw_name = "keyspan/mpr.fw";
1646 break;
1647
1648 case keyspan_usa19qw_pre_product_id:
1649 fw_name = "keyspan/usa19qw.fw";
1650 break;
1651
1652 case keyspan_usa18x_pre_product_id:
1653 fw_name = "keyspan/usa18x.fw";
1654 break;
1655
1656 case keyspan_usa19w_pre_product_id:
1657 fw_name = "keyspan/usa19w.fw";
1658 break;
1659
1660 case keyspan_usa49w_pre_product_id:
1661 fw_name = "keyspan/usa49w.fw";
1662 break;
1663
1664 case keyspan_usa49wlc_pre_product_id:
1665 fw_name = "keyspan/usa49wlc.fw";
1666 break;
1667
1668 default:
1669 dev_err(&serial->dev->dev, "Unknown product ID (%04x)\n",
1670 le16_to_cpu(serial->dev->descriptor.idProduct));
1671 return 1;
1672 }
1673
1674 dev_dbg(&serial->dev->dev, "Uploading Keyspan %s firmware.\n", fw_name);
1675
1676 if (ezusb_fx1_ihex_firmware_download(serial->dev, fw_name) < 0) {
1677 dev_err(&serial->dev->dev, "failed to load firmware \"%s\"\n",
1678 fw_name);
1679 return -ENOENT;
1680 }
1681
1682 /* after downloading firmware Renumeration will occur in a
1683 moment and the new device will bind to the real driver */
1684
1685 /* we don't want this device to have a driver assigned to it. */
1686 return 1;
1687}
1688
1689/* Helper functions used by keyspan_setup_urbs */
1690static struct usb_endpoint_descriptor const *find_ep(struct usb_serial const *serial,
1691 int endpoint)
1692{
1693 struct usb_host_interface *iface_desc;
1694 struct usb_endpoint_descriptor *ep;
1695 int i;
1696
1697 iface_desc = serial->interface->cur_altsetting;
1698 for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
1699 ep = &iface_desc->endpoint[i].desc;
1700 if (ep->bEndpointAddress == endpoint)
1701 return ep;
1702 }
1703 dev_warn(&serial->interface->dev, "found no endpoint descriptor for endpoint %x\n",
1704 endpoint);
1705 return NULL;
1706}
1707
1708static struct urb *keyspan_setup_urb(struct usb_serial *serial, int endpoint,
1709 int dir, void *ctx, char *buf, int len,
1710 void (*callback)(struct urb *))
1711{
1712 struct urb *urb;
1713 struct usb_endpoint_descriptor const *ep_desc;
1714 char const *ep_type_name;
1715
1716 if (endpoint == -1)
1717 return NULL; /* endpoint not needed */
1718
1719 dev_dbg(&serial->interface->dev, "%s - alloc for endpoint %x\n",
1720 __func__, endpoint);
1721 urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */
1722 if (!urb)
1723 return NULL;
1724
1725 if (endpoint == 0) {
1726 /* control EP filled in when used */
1727 return urb;
1728 }
1729
1730 ep_desc = find_ep(serial, endpoint);
1731 if (!ep_desc) {
1732 usb_free_urb(urb);
1733 return NULL;
1734 }
1735 if (usb_endpoint_xfer_int(ep_desc)) {
1736 ep_type_name = "INT";
1737 usb_fill_int_urb(urb, serial->dev,
1738 usb_sndintpipe(serial->dev, endpoint) | dir,
1739 buf, len, callback, ctx,
1740 ep_desc->bInterval);
1741 } else if (usb_endpoint_xfer_bulk(ep_desc)) {
1742 ep_type_name = "BULK";
1743 usb_fill_bulk_urb(urb, serial->dev,
1744 usb_sndbulkpipe(serial->dev, endpoint) | dir,
1745 buf, len, callback, ctx);
1746 } else {
1747 dev_warn(&serial->interface->dev,
1748 "unsupported endpoint type %x\n",
1749 usb_endpoint_type(ep_desc));
1750 usb_free_urb(urb);
1751 return NULL;
1752 }
1753
1754 dev_dbg(&serial->interface->dev, "%s - using urb %p for %s endpoint %x\n",
1755 __func__, urb, ep_type_name, endpoint);
1756 return urb;
1757}
1758
1759static struct callbacks {
1760 void (*instat_callback)(struct urb *);
1761 void (*glocont_callback)(struct urb *);
1762 void (*indat_callback)(struct urb *);
1763 void (*outdat_callback)(struct urb *);
1764 void (*inack_callback)(struct urb *);
1765 void (*outcont_callback)(struct urb *);
1766} keyspan_callbacks[] = {
1767 {
1768 /* msg_usa26 callbacks */
1769 .instat_callback = usa26_instat_callback,
1770 .glocont_callback = usa26_glocont_callback,
1771 .indat_callback = usa26_indat_callback,
1772 .outdat_callback = usa2x_outdat_callback,
1773 .inack_callback = usa26_inack_callback,
1774 .outcont_callback = usa26_outcont_callback,
1775 }, {
1776 /* msg_usa28 callbacks */
1777 .instat_callback = usa28_instat_callback,
1778 .glocont_callback = usa28_glocont_callback,
1779 .indat_callback = usa28_indat_callback,
1780 .outdat_callback = usa2x_outdat_callback,
1781 .inack_callback = usa28_inack_callback,
1782 .outcont_callback = usa28_outcont_callback,
1783 }, {
1784 /* msg_usa49 callbacks */
1785 .instat_callback = usa49_instat_callback,
1786 .glocont_callback = usa49_glocont_callback,
1787 .indat_callback = usa49_indat_callback,
1788 .outdat_callback = usa2x_outdat_callback,
1789 .inack_callback = usa49_inack_callback,
1790 .outcont_callback = usa49_outcont_callback,
1791 }, {
1792 /* msg_usa90 callbacks */
1793 .instat_callback = usa90_instat_callback,
1794 .glocont_callback = usa28_glocont_callback,
1795 .indat_callback = usa90_indat_callback,
1796 .outdat_callback = usa2x_outdat_callback,
1797 .inack_callback = usa28_inack_callback,
1798 .outcont_callback = usa90_outcont_callback,
1799 }, {
1800 /* msg_usa67 callbacks */
1801 .instat_callback = usa67_instat_callback,
1802 .glocont_callback = usa67_glocont_callback,
1803 .indat_callback = usa26_indat_callback,
1804 .outdat_callback = usa2x_outdat_callback,
1805 .inack_callback = usa26_inack_callback,
1806 .outcont_callback = usa26_outcont_callback,
1807 }
1808};
1809
1810 /* Generic setup urbs function that uses
1811 data in device_details */
1812static void keyspan_setup_urbs(struct usb_serial *serial)
1813{
1814 struct keyspan_serial_private *s_priv;
1815 const struct keyspan_device_details *d_details;
1816 struct callbacks *cback;
1817
1818 s_priv = usb_get_serial_data(serial);
1819 d_details = s_priv->device_details;
1820
1821 /* Setup values for the various callback routines */
1822 cback = &keyspan_callbacks[d_details->msg_format];
1823
1824 /* Allocate and set up urbs for each one that is in use,
1825 starting with instat endpoints */
1826 s_priv->instat_urb = keyspan_setup_urb
1827 (serial, d_details->instat_endpoint, USB_DIR_IN,
1828 serial, s_priv->instat_buf, INSTAT_BUFLEN,
1829 cback->instat_callback);
1830
1831 s_priv->indat_urb = keyspan_setup_urb
1832 (serial, d_details->indat_endpoint, USB_DIR_IN,
1833 serial, s_priv->indat_buf, INDAT49W_BUFLEN,
1834 usa49wg_indat_callback);
1835
1836 s_priv->glocont_urb = keyspan_setup_urb
1837 (serial, d_details->glocont_endpoint, USB_DIR_OUT,
1838 serial, s_priv->glocont_buf, GLOCONT_BUFLEN,
1839 cback->glocont_callback);
1840}
1841
1842/* usa19 function doesn't require prescaler */
1843static int keyspan_usa19_calc_baud(struct usb_serial_port *port,
1844 u32 baud_rate, u32 baudclk, u8 *rate_hi,
1845 u8 *rate_low, u8 *prescaler, int portnum)
1846{
1847 u32 b16, /* baud rate times 16 (actual rate used internally) */
1848 div, /* divisor */
1849 cnt; /* inverse of divisor (programmed into 8051) */
1850
1851 dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate);
1852
1853 /* prevent divide by zero... */
1854 b16 = baud_rate * 16L;
1855 if (b16 == 0)
1856 return KEYSPAN_INVALID_BAUD_RATE;
1857 /* Any "standard" rate over 57k6 is marginal on the USA-19
1858 as we run out of divisor resolution. */
1859 if (baud_rate > 57600)
1860 return KEYSPAN_INVALID_BAUD_RATE;
1861
1862 /* calculate the divisor and the counter (its inverse) */
1863 div = baudclk / b16;
1864 if (div == 0)
1865 return KEYSPAN_INVALID_BAUD_RATE;
1866 else
1867 cnt = 0 - div;
1868
1869 if (div > 0xffff)
1870 return KEYSPAN_INVALID_BAUD_RATE;
1871
1872 /* return the counter values if non-null */
1873 if (rate_low)
1874 *rate_low = (u8) (cnt & 0xff);
1875 if (rate_hi)
1876 *rate_hi = (u8) ((cnt >> 8) & 0xff);
1877 if (rate_low && rate_hi)
1878 dev_dbg(&port->dev, "%s - %d %02x %02x.\n",
1879 __func__, baud_rate, *rate_hi, *rate_low);
1880 return KEYSPAN_BAUD_RATE_OK;
1881}
1882
1883/* usa19hs function doesn't require prescaler */
1884static int keyspan_usa19hs_calc_baud(struct usb_serial_port *port,
1885 u32 baud_rate, u32 baudclk, u8 *rate_hi,
1886 u8 *rate_low, u8 *prescaler, int portnum)
1887{
1888 u32 b16, /* baud rate times 16 (actual rate used internally) */
1889 div; /* divisor */
1890
1891 dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate);
1892
1893 /* prevent divide by zero... */
1894 b16 = baud_rate * 16L;
1895 if (b16 == 0)
1896 return KEYSPAN_INVALID_BAUD_RATE;
1897
1898 /* calculate the divisor */
1899 div = baudclk / b16;
1900 if (div == 0)
1901 return KEYSPAN_INVALID_BAUD_RATE;
1902
1903 if (div > 0xffff)
1904 return KEYSPAN_INVALID_BAUD_RATE;
1905
1906 /* return the counter values if non-null */
1907 if (rate_low)
1908 *rate_low = (u8) (div & 0xff);
1909
1910 if (rate_hi)
1911 *rate_hi = (u8) ((div >> 8) & 0xff);
1912
1913 if (rate_low && rate_hi)
1914 dev_dbg(&port->dev, "%s - %d %02x %02x.\n",
1915 __func__, baud_rate, *rate_hi, *rate_low);
1916
1917 return KEYSPAN_BAUD_RATE_OK;
1918}
1919
1920static int keyspan_usa19w_calc_baud(struct usb_serial_port *port,
1921 u32 baud_rate, u32 baudclk, u8 *rate_hi,
1922 u8 *rate_low, u8 *prescaler, int portnum)
1923{
1924 u32 b16, /* baud rate times 16 (actual rate used internally) */
1925 clk, /* clock with 13/8 prescaler */
1926 div, /* divisor using 13/8 prescaler */
1927 res, /* resulting baud rate using 13/8 prescaler */
1928 diff, /* error using 13/8 prescaler */
1929 smallest_diff;
1930 u8 best_prescaler;
1931 int i;
1932
1933 dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate);
1934
1935 /* prevent divide by zero */
1936 b16 = baud_rate * 16L;
1937 if (b16 == 0)
1938 return KEYSPAN_INVALID_BAUD_RATE;
1939
1940 /* Calculate prescaler by trying them all and looking
1941 for best fit */
1942
1943 /* start with largest possible difference */
1944 smallest_diff = 0xffffffff;
1945
1946 /* 0 is an invalid prescaler, used as a flag */
1947 best_prescaler = 0;
1948
1949 for (i = 8; i <= 0xff; ++i) {
1950 clk = (baudclk * 8) / (u32) i;
1951
1952 div = clk / b16;
1953 if (div == 0)
1954 continue;
1955
1956 res = clk / div;
1957 diff = (res > b16) ? (res-b16) : (b16-res);
1958
1959 if (diff < smallest_diff) {
1960 best_prescaler = i;
1961 smallest_diff = diff;
1962 }
1963 }
1964
1965 if (best_prescaler == 0)
1966 return KEYSPAN_INVALID_BAUD_RATE;
1967
1968 clk = (baudclk * 8) / (u32) best_prescaler;
1969 div = clk / b16;
1970
1971 /* return the divisor and prescaler if non-null */
1972 if (rate_low)
1973 *rate_low = (u8) (div & 0xff);
1974 if (rate_hi)
1975 *rate_hi = (u8) ((div >> 8) & 0xff);
1976 if (prescaler) {
1977 *prescaler = best_prescaler;
1978 /* dev_dbg(&port->dev, "%s - %d %d\n", __func__, *prescaler, div); */
1979 }
1980 return KEYSPAN_BAUD_RATE_OK;
1981}
1982
1983 /* USA-28 supports different maximum baud rates on each port */
1984static int keyspan_usa28_calc_baud(struct usb_serial_port *port,
1985 u32 baud_rate, u32 baudclk, u8 *rate_hi,
1986 u8 *rate_low, u8 *prescaler, int portnum)
1987{
1988 u32 b16, /* baud rate times 16 (actual rate used internally) */
1989 div, /* divisor */
1990 cnt; /* inverse of divisor (programmed into 8051) */
1991
1992 dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate);
1993
1994 /* prevent divide by zero */
1995 b16 = baud_rate * 16L;
1996 if (b16 == 0)
1997 return KEYSPAN_INVALID_BAUD_RATE;
1998
1999 /* calculate the divisor and the counter (its inverse) */
2000 div = KEYSPAN_USA28_BAUDCLK / b16;
2001 if (div == 0)
2002 return KEYSPAN_INVALID_BAUD_RATE;
2003 else
2004 cnt = 0 - div;
2005
2006 /* check for out of range, based on portnum,
2007 and return result */
2008 if (portnum == 0) {
2009 if (div > 0xffff)
2010 return KEYSPAN_INVALID_BAUD_RATE;
2011 } else {
2012 if (portnum == 1) {
2013 if (div > 0xff)
2014 return KEYSPAN_INVALID_BAUD_RATE;
2015 } else
2016 return KEYSPAN_INVALID_BAUD_RATE;
2017 }
2018
2019 /* return the counter values if not NULL
2020 (port 1 will ignore retHi) */
2021 if (rate_low)
2022 *rate_low = (u8) (cnt & 0xff);
2023 if (rate_hi)
2024 *rate_hi = (u8) ((cnt >> 8) & 0xff);
2025 dev_dbg(&port->dev, "%s - %d OK.\n", __func__, baud_rate);
2026 return KEYSPAN_BAUD_RATE_OK;
2027}
2028
2029static int keyspan_usa26_send_setup(struct usb_serial *serial,
2030 struct usb_serial_port *port,
2031 int reset_port)
2032{
2033 struct keyspan_usa26_portControlMessage msg;
2034 struct keyspan_serial_private *s_priv;
2035 struct keyspan_port_private *p_priv;
2036 const struct keyspan_device_details *d_details;
2037 struct urb *this_urb;
2038 int device_port, err;
2039
2040 dev_dbg(&port->dev, "%s reset=%d\n", __func__, reset_port);
2041
2042 s_priv = usb_get_serial_data(serial);
2043 p_priv = usb_get_serial_port_data(port);
2044 d_details = s_priv->device_details;
2045 device_port = port->port_number;
2046
2047 this_urb = p_priv->outcont_urb;
2048
2049 /* Make sure we have an urb then send the message */
2050 if (this_urb == NULL) {
2051 dev_dbg(&port->dev, "%s - oops no urb.\n", __func__);
2052 return -1;
2053 }
2054
2055 dev_dbg(&port->dev, "%s - endpoint %x\n",
2056 __func__, usb_pipeendpoint(this_urb->pipe));
2057
2058 /* Save reset port val for resend.
2059 Don't overwrite resend for open/close condition. */
2060 if ((reset_port + 1) > p_priv->resend_cont)
2061 p_priv->resend_cont = reset_port + 1;
2062 if (this_urb->status == -EINPROGRESS) {
2063 /* dev_dbg(&port->dev, "%s - already writing\n", __func__); */
2064 mdelay(5);
2065 return -1;
2066 }
2067
2068 memset(&msg, 0, sizeof(struct keyspan_usa26_portControlMessage));
2069
2070 /* Only set baud rate if it's changed */
2071 if (p_priv->old_baud != p_priv->baud) {
2072 p_priv->old_baud = p_priv->baud;
2073 msg.setClocking = 0xff;
2074 if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk,
2075 &msg.baudHi, &msg.baudLo, &msg.prescaler,
2076 device_port) == KEYSPAN_INVALID_BAUD_RATE) {
2077 dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n",
2078 __func__, p_priv->baud);
2079 msg.baudLo = 0;
2080 msg.baudHi = 125; /* Values for 9600 baud */
2081 msg.prescaler = 10;
2082 }
2083 msg.setPrescaler = 0xff;
2084 }
2085
2086 msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1;
2087 switch (p_priv->cflag & CSIZE) {
2088 case CS5:
2089 msg.lcr |= USA_DATABITS_5;
2090 break;
2091 case CS6:
2092 msg.lcr |= USA_DATABITS_6;
2093 break;
2094 case CS7:
2095 msg.lcr |= USA_DATABITS_7;
2096 break;
2097 case CS8:
2098 msg.lcr |= USA_DATABITS_8;
2099 break;
2100 }
2101 if (p_priv->cflag & PARENB) {
2102 /* note USA_PARITY_NONE == 0 */
2103 msg.lcr |= (p_priv->cflag & PARODD) ?
2104 USA_PARITY_ODD : USA_PARITY_EVEN;
2105 }
2106 msg.setLcr = 0xff;
2107
2108 msg.ctsFlowControl = (p_priv->flow_control == flow_cts);
2109 msg.xonFlowControl = 0;
2110 msg.setFlowControl = 0xff;
2111 msg.forwardingLength = 16;
2112 msg.xonChar = 17;
2113 msg.xoffChar = 19;
2114
2115 /* Opening port */
2116 if (reset_port == 1) {
2117 msg._txOn = 1;
2118 msg._txOff = 0;
2119 msg.txFlush = 0;
2120 msg.txBreak = 0;
2121 msg.rxOn = 1;
2122 msg.rxOff = 0;
2123 msg.rxFlush = 1;
2124 msg.rxForward = 0;
2125 msg.returnStatus = 0;
2126 msg.resetDataToggle = 0xff;
2127 }
2128
2129 /* Closing port */
2130 else if (reset_port == 2) {
2131 msg._txOn = 0;
2132 msg._txOff = 1;
2133 msg.txFlush = 0;
2134 msg.txBreak = 0;
2135 msg.rxOn = 0;
2136 msg.rxOff = 1;
2137 msg.rxFlush = 1;
2138 msg.rxForward = 0;
2139 msg.returnStatus = 0;
2140 msg.resetDataToggle = 0;
2141 }
2142
2143 /* Sending intermediate configs */
2144 else {
2145 msg._txOn = (!p_priv->break_on);
2146 msg._txOff = 0;
2147 msg.txFlush = 0;
2148 msg.txBreak = (p_priv->break_on);
2149 msg.rxOn = 0;
2150 msg.rxOff = 0;
2151 msg.rxFlush = 0;
2152 msg.rxForward = 0;
2153 msg.returnStatus = 0;
2154 msg.resetDataToggle = 0x0;
2155 }
2156
2157 /* Do handshaking outputs */
2158 msg.setTxTriState_setRts = 0xff;
2159 msg.txTriState_rts = p_priv->rts_state;
2160
2161 msg.setHskoa_setDtr = 0xff;
2162 msg.hskoa_dtr = p_priv->dtr_state;
2163
2164 p_priv->resend_cont = 0;
2165 memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
2166
2167 /* send the data out the device on control endpoint */
2168 this_urb->transfer_buffer_length = sizeof(msg);
2169
2170 err = usb_submit_urb(this_urb, GFP_ATOMIC);
2171 if (err != 0)
2172 dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);
2173 return 0;
2174}
2175
2176static int keyspan_usa28_send_setup(struct usb_serial *serial,
2177 struct usb_serial_port *port,
2178 int reset_port)
2179{
2180 struct keyspan_usa28_portControlMessage msg;
2181 struct keyspan_serial_private *s_priv;
2182 struct keyspan_port_private *p_priv;
2183 const struct keyspan_device_details *d_details;
2184 struct urb *this_urb;
2185 int device_port, err;
2186
2187 s_priv = usb_get_serial_data(serial);
2188 p_priv = usb_get_serial_port_data(port);
2189 d_details = s_priv->device_details;
2190 device_port = port->port_number;
2191
2192 /* only do something if we have a bulk out endpoint */
2193 this_urb = p_priv->outcont_urb;
2194 if (this_urb == NULL) {
2195 dev_dbg(&port->dev, "%s - oops no urb.\n", __func__);
2196 return -1;
2197 }
2198
2199 /* Save reset port val for resend.
2200 Don't overwrite resend for open/close condition. */
2201 if ((reset_port + 1) > p_priv->resend_cont)
2202 p_priv->resend_cont = reset_port + 1;
2203 if (this_urb->status == -EINPROGRESS) {
2204 dev_dbg(&port->dev, "%s already writing\n", __func__);
2205 mdelay(5);
2206 return -1;
2207 }
2208
2209 memset(&msg, 0, sizeof(struct keyspan_usa28_portControlMessage));
2210
2211 msg.setBaudRate = 1;
2212 if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk,
2213 &msg.baudHi, &msg.baudLo, NULL,
2214 device_port) == KEYSPAN_INVALID_BAUD_RATE) {
2215 dev_dbg(&port->dev, "%s - Invalid baud rate requested %d.\n",
2216 __func__, p_priv->baud);
2217 msg.baudLo = 0xff;
2218 msg.baudHi = 0xb2; /* Values for 9600 baud */
2219 }
2220
2221 /* If parity is enabled, we must calculate it ourselves. */
2222 msg.parity = 0; /* XXX for now */
2223
2224 msg.ctsFlowControl = (p_priv->flow_control == flow_cts);
2225 msg.xonFlowControl = 0;
2226
2227 /* Do handshaking outputs, DTR is inverted relative to RTS */
2228 msg.rts = p_priv->rts_state;
2229 msg.dtr = p_priv->dtr_state;
2230
2231 msg.forwardingLength = 16;
2232 msg.forwardMs = 10;
2233 msg.breakThreshold = 45;
2234 msg.xonChar = 17;
2235 msg.xoffChar = 19;
2236
2237 /*msg.returnStatus = 1;
2238 msg.resetDataToggle = 0xff;*/
2239 /* Opening port */
2240 if (reset_port == 1) {
2241 msg._txOn = 1;
2242 msg._txOff = 0;
2243 msg.txFlush = 0;
2244 msg.txForceXoff = 0;
2245 msg.txBreak = 0;
2246 msg.rxOn = 1;
2247 msg.rxOff = 0;
2248 msg.rxFlush = 1;
2249 msg.rxForward = 0;
2250 msg.returnStatus = 0;
2251 msg.resetDataToggle = 0xff;
2252 }
2253 /* Closing port */
2254 else if (reset_port == 2) {
2255 msg._txOn = 0;
2256 msg._txOff = 1;
2257 msg.txFlush = 0;
2258 msg.txForceXoff = 0;
2259 msg.txBreak = 0;
2260 msg.rxOn = 0;
2261 msg.rxOff = 1;
2262 msg.rxFlush = 1;
2263 msg.rxForward = 0;
2264 msg.returnStatus = 0;
2265 msg.resetDataToggle = 0;
2266 }
2267 /* Sending intermediate configs */
2268 else {
2269 msg._txOn = (!p_priv->break_on);
2270 msg._txOff = 0;
2271 msg.txFlush = 0;
2272 msg.txForceXoff = 0;
2273 msg.txBreak = (p_priv->break_on);
2274 msg.rxOn = 0;
2275 msg.rxOff = 0;
2276 msg.rxFlush = 0;
2277 msg.rxForward = 0;
2278 msg.returnStatus = 0;
2279 msg.resetDataToggle = 0x0;
2280 }
2281
2282 p_priv->resend_cont = 0;
2283 memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
2284
2285 /* send the data out the device on control endpoint */
2286 this_urb->transfer_buffer_length = sizeof(msg);
2287
2288 err = usb_submit_urb(this_urb, GFP_ATOMIC);
2289 if (err != 0)
2290 dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed\n", __func__);
2291
2292 return 0;
2293}
2294
2295static int keyspan_usa49_send_setup(struct usb_serial *serial,
2296 struct usb_serial_port *port,
2297 int reset_port)
2298{
2299 struct keyspan_usa49_portControlMessage msg;
2300 struct usb_ctrlrequest *dr = NULL;
2301 struct keyspan_serial_private *s_priv;
2302 struct keyspan_port_private *p_priv;
2303 const struct keyspan_device_details *d_details;
2304 struct urb *this_urb;
2305 int err, device_port;
2306
2307 s_priv = usb_get_serial_data(serial);
2308 p_priv = usb_get_serial_port_data(port);
2309 d_details = s_priv->device_details;
2310
2311 this_urb = s_priv->glocont_urb;
2312
2313 /* Work out which port within the device is being setup */
2314 device_port = port->port_number;
2315
2316 /* Make sure we have an urb then send the message */
2317 if (this_urb == NULL) {
2318 dev_dbg(&port->dev, "%s - oops no urb for port.\n", __func__);
2319 return -1;
2320 }
2321
2322 dev_dbg(&port->dev, "%s - endpoint %x (%d)\n",
2323 __func__, usb_pipeendpoint(this_urb->pipe), device_port);
2324
2325 /* Save reset port val for resend.
2326 Don't overwrite resend for open/close condition. */
2327 if ((reset_port + 1) > p_priv->resend_cont)
2328 p_priv->resend_cont = reset_port + 1;
2329
2330 if (this_urb->status == -EINPROGRESS) {
2331 /* dev_dbg(&port->dev, "%s - already writing\n", __func__); */
2332 mdelay(5);
2333 return -1;
2334 }
2335
2336 memset(&msg, 0, sizeof(struct keyspan_usa49_portControlMessage));
2337
2338 msg.portNumber = device_port;
2339
2340 /* Only set baud rate if it's changed */
2341 if (p_priv->old_baud != p_priv->baud) {
2342 p_priv->old_baud = p_priv->baud;
2343 msg.setClocking = 0xff;
2344 if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk,
2345 &msg.baudHi, &msg.baudLo, &msg.prescaler,
2346 device_port) == KEYSPAN_INVALID_BAUD_RATE) {
2347 dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n",
2348 __func__, p_priv->baud);
2349 msg.baudLo = 0;
2350 msg.baudHi = 125; /* Values for 9600 baud */
2351 msg.prescaler = 10;
2352 }
2353 /* msg.setPrescaler = 0xff; */
2354 }
2355
2356 msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1;
2357 switch (p_priv->cflag & CSIZE) {
2358 case CS5:
2359 msg.lcr |= USA_DATABITS_5;
2360 break;
2361 case CS6:
2362 msg.lcr |= USA_DATABITS_6;
2363 break;
2364 case CS7:
2365 msg.lcr |= USA_DATABITS_7;
2366 break;
2367 case CS8:
2368 msg.lcr |= USA_DATABITS_8;
2369 break;
2370 }
2371 if (p_priv->cflag & PARENB) {
2372 /* note USA_PARITY_NONE == 0 */
2373 msg.lcr |= (p_priv->cflag & PARODD) ?
2374 USA_PARITY_ODD : USA_PARITY_EVEN;
2375 }
2376 msg.setLcr = 0xff;
2377
2378 msg.ctsFlowControl = (p_priv->flow_control == flow_cts);
2379 msg.xonFlowControl = 0;
2380 msg.setFlowControl = 0xff;
2381
2382 msg.forwardingLength = 16;
2383 msg.xonChar = 17;
2384 msg.xoffChar = 19;
2385
2386 /* Opening port */
2387 if (reset_port == 1) {
2388 msg._txOn = 1;
2389 msg._txOff = 0;
2390 msg.txFlush = 0;
2391 msg.txBreak = 0;
2392 msg.rxOn = 1;
2393 msg.rxOff = 0;
2394 msg.rxFlush = 1;
2395 msg.rxForward = 0;
2396 msg.returnStatus = 0;
2397 msg.resetDataToggle = 0xff;
2398 msg.enablePort = 1;
2399 msg.disablePort = 0;
2400 }
2401 /* Closing port */
2402 else if (reset_port == 2) {
2403 msg._txOn = 0;
2404 msg._txOff = 1;
2405 msg.txFlush = 0;
2406 msg.txBreak = 0;
2407 msg.rxOn = 0;
2408 msg.rxOff = 1;
2409 msg.rxFlush = 1;
2410 msg.rxForward = 0;
2411 msg.returnStatus = 0;
2412 msg.resetDataToggle = 0;
2413 msg.enablePort = 0;
2414 msg.disablePort = 1;
2415 }
2416 /* Sending intermediate configs */
2417 else {
2418 msg._txOn = (!p_priv->break_on);
2419 msg._txOff = 0;
2420 msg.txFlush = 0;
2421 msg.txBreak = (p_priv->break_on);
2422 msg.rxOn = 0;
2423 msg.rxOff = 0;
2424 msg.rxFlush = 0;
2425 msg.rxForward = 0;
2426 msg.returnStatus = 0;
2427 msg.resetDataToggle = 0x0;
2428 msg.enablePort = 0;
2429 msg.disablePort = 0;
2430 }
2431
2432 /* Do handshaking outputs */
2433 msg.setRts = 0xff;
2434 msg.rts = p_priv->rts_state;
2435
2436 msg.setDtr = 0xff;
2437 msg.dtr = p_priv->dtr_state;
2438
2439 p_priv->resend_cont = 0;
2440
2441 /* if the device is a 49wg, we send control message on usb
2442 control EP 0 */
2443
2444 if (d_details->product_id == keyspan_usa49wg_product_id) {
2445 dr = (void *)(s_priv->ctrl_buf);
2446 dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_OUT;
2447 dr->bRequest = 0xB0; /* 49wg control message */
2448 dr->wValue = 0;
2449 dr->wIndex = 0;
2450 dr->wLength = cpu_to_le16(sizeof(msg));
2451
2452 memcpy(s_priv->glocont_buf, &msg, sizeof(msg));
2453
2454 usb_fill_control_urb(this_urb, serial->dev,
2455 usb_sndctrlpipe(serial->dev, 0),
2456 (unsigned char *)dr, s_priv->glocont_buf,
2457 sizeof(msg), usa49_glocont_callback, serial);
2458
2459 } else {
2460 memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
2461
2462 /* send the data out the device on control endpoint */
2463 this_urb->transfer_buffer_length = sizeof(msg);
2464 }
2465 err = usb_submit_urb(this_urb, GFP_ATOMIC);
2466 if (err != 0)
2467 dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);
2468
2469 return 0;
2470}
2471
2472static int keyspan_usa90_send_setup(struct usb_serial *serial,
2473 struct usb_serial_port *port,
2474 int reset_port)
2475{
2476 struct keyspan_usa90_portControlMessage msg;
2477 struct keyspan_serial_private *s_priv;
2478 struct keyspan_port_private *p_priv;
2479 const struct keyspan_device_details *d_details;
2480 struct urb *this_urb;
2481 int err;
2482 u8 prescaler;
2483
2484 s_priv = usb_get_serial_data(serial);
2485 p_priv = usb_get_serial_port_data(port);
2486 d_details = s_priv->device_details;
2487
2488 /* only do something if we have a bulk out endpoint */
2489 this_urb = p_priv->outcont_urb;
2490 if (this_urb == NULL) {
2491 dev_dbg(&port->dev, "%s - oops no urb.\n", __func__);
2492 return -1;
2493 }
2494
2495 /* Save reset port val for resend.
2496 Don't overwrite resend for open/close condition. */
2497 if ((reset_port + 1) > p_priv->resend_cont)
2498 p_priv->resend_cont = reset_port + 1;
2499 if (this_urb->status == -EINPROGRESS) {
2500 dev_dbg(&port->dev, "%s already writing\n", __func__);
2501 mdelay(5);
2502 return -1;
2503 }
2504
2505 memset(&msg, 0, sizeof(struct keyspan_usa90_portControlMessage));
2506
2507 /* Only set baud rate if it's changed */
2508 if (p_priv->old_baud != p_priv->baud) {
2509 p_priv->old_baud = p_priv->baud;
2510 msg.setClocking = 0x01;
2511 if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk,
2512 &msg.baudHi, &msg.baudLo, &prescaler, 0) == KEYSPAN_INVALID_BAUD_RATE) {
2513 dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n",
2514 __func__, p_priv->baud);
2515 p_priv->baud = 9600;
2516 d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk,
2517 &msg.baudHi, &msg.baudLo, &prescaler, 0);
2518 }
2519 msg.setRxMode = 1;
2520 msg.setTxMode = 1;
2521 }
2522
2523 /* modes must always be correctly specified */
2524 if (p_priv->baud > 57600) {
2525 msg.rxMode = RXMODE_DMA;
2526 msg.txMode = TXMODE_DMA;
2527 } else {
2528 msg.rxMode = RXMODE_BYHAND;
2529 msg.txMode = TXMODE_BYHAND;
2530 }
2531
2532 msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1;
2533 switch (p_priv->cflag & CSIZE) {
2534 case CS5:
2535 msg.lcr |= USA_DATABITS_5;
2536 break;
2537 case CS6:
2538 msg.lcr |= USA_DATABITS_6;
2539 break;
2540 case CS7:
2541 msg.lcr |= USA_DATABITS_7;
2542 break;
2543 case CS8:
2544 msg.lcr |= USA_DATABITS_8;
2545 break;
2546 }
2547 if (p_priv->cflag & PARENB) {
2548 /* note USA_PARITY_NONE == 0 */
2549 msg.lcr |= (p_priv->cflag & PARODD) ?
2550 USA_PARITY_ODD : USA_PARITY_EVEN;
2551 }
2552 if (p_priv->old_cflag != p_priv->cflag) {
2553 p_priv->old_cflag = p_priv->cflag;
2554 msg.setLcr = 0x01;
2555 }
2556
2557 if (p_priv->flow_control == flow_cts)
2558 msg.txFlowControl = TXFLOW_CTS;
2559 msg.setTxFlowControl = 0x01;
2560 msg.setRxFlowControl = 0x01;
2561
2562 msg.rxForwardingLength = 16;
2563 msg.rxForwardingTimeout = 16;
2564 msg.txAckSetting = 0;
2565 msg.xonChar = 17;
2566 msg.xoffChar = 19;
2567
2568 /* Opening port */
2569 if (reset_port == 1) {
2570 msg.portEnabled = 1;
2571 msg.rxFlush = 1;
2572 msg.txBreak = (p_priv->break_on);
2573 }
2574 /* Closing port */
2575 else if (reset_port == 2)
2576 msg.portEnabled = 0;
2577 /* Sending intermediate configs */
2578 else {
2579 msg.portEnabled = 1;
2580 msg.txBreak = (p_priv->break_on);
2581 }
2582
2583 /* Do handshaking outputs */
2584 msg.setRts = 0x01;
2585 msg.rts = p_priv->rts_state;
2586
2587 msg.setDtr = 0x01;
2588 msg.dtr = p_priv->dtr_state;
2589
2590 p_priv->resend_cont = 0;
2591 memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
2592
2593 /* send the data out the device on control endpoint */
2594 this_urb->transfer_buffer_length = sizeof(msg);
2595
2596 err = usb_submit_urb(this_urb, GFP_ATOMIC);
2597 if (err != 0)
2598 dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);
2599 return 0;
2600}
2601
2602static int keyspan_usa67_send_setup(struct usb_serial *serial,
2603 struct usb_serial_port *port,
2604 int reset_port)
2605{
2606 struct keyspan_usa67_portControlMessage msg;
2607 struct keyspan_serial_private *s_priv;
2608 struct keyspan_port_private *p_priv;
2609 const struct keyspan_device_details *d_details;
2610 struct urb *this_urb;
2611 int err, device_port;
2612
2613 s_priv = usb_get_serial_data(serial);
2614 p_priv = usb_get_serial_port_data(port);
2615 d_details = s_priv->device_details;
2616
2617 this_urb = s_priv->glocont_urb;
2618
2619 /* Work out which port within the device is being setup */
2620 device_port = port->port_number;
2621
2622 /* Make sure we have an urb then send the message */
2623 if (this_urb == NULL) {
2624 dev_dbg(&port->dev, "%s - oops no urb for port.\n", __func__);
2625 return -1;
2626 }
2627
2628 /* Save reset port val for resend.
2629 Don't overwrite resend for open/close condition. */
2630 if ((reset_port + 1) > p_priv->resend_cont)
2631 p_priv->resend_cont = reset_port + 1;
2632 if (this_urb->status == -EINPROGRESS) {
2633 /* dev_dbg(&port->dev, "%s - already writing\n", __func__); */
2634 mdelay(5);
2635 return -1;
2636 }
2637
2638 memset(&msg, 0, sizeof(struct keyspan_usa67_portControlMessage));
2639
2640 msg.port = device_port;
2641
2642 /* Only set baud rate if it's changed */
2643 if (p_priv->old_baud != p_priv->baud) {
2644 p_priv->old_baud = p_priv->baud;
2645 msg.setClocking = 0xff;
2646 if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk,
2647 &msg.baudHi, &msg.baudLo, &msg.prescaler,
2648 device_port) == KEYSPAN_INVALID_BAUD_RATE) {
2649 dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n",
2650 __func__, p_priv->baud);
2651 msg.baudLo = 0;
2652 msg.baudHi = 125; /* Values for 9600 baud */
2653 msg.prescaler = 10;
2654 }
2655 msg.setPrescaler = 0xff;
2656 }
2657
2658 msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1;
2659 switch (p_priv->cflag & CSIZE) {
2660 case CS5:
2661 msg.lcr |= USA_DATABITS_5;
2662 break;
2663 case CS6:
2664 msg.lcr |= USA_DATABITS_6;
2665 break;
2666 case CS7:
2667 msg.lcr |= USA_DATABITS_7;
2668 break;
2669 case CS8:
2670 msg.lcr |= USA_DATABITS_8;
2671 break;
2672 }
2673 if (p_priv->cflag & PARENB) {
2674 /* note USA_PARITY_NONE == 0 */
2675 msg.lcr |= (p_priv->cflag & PARODD) ?
2676 USA_PARITY_ODD : USA_PARITY_EVEN;
2677 }
2678 msg.setLcr = 0xff;
2679
2680 msg.ctsFlowControl = (p_priv->flow_control == flow_cts);
2681 msg.xonFlowControl = 0;
2682 msg.setFlowControl = 0xff;
2683 msg.forwardingLength = 16;
2684 msg.xonChar = 17;
2685 msg.xoffChar = 19;
2686
2687 if (reset_port == 1) {
2688 /* Opening port */
2689 msg._txOn = 1;
2690 msg._txOff = 0;
2691 msg.txFlush = 0;
2692 msg.txBreak = 0;
2693 msg.rxOn = 1;
2694 msg.rxOff = 0;
2695 msg.rxFlush = 1;
2696 msg.rxForward = 0;
2697 msg.returnStatus = 0;
2698 msg.resetDataToggle = 0xff;
2699 } else if (reset_port == 2) {
2700 /* Closing port */
2701 msg._txOn = 0;
2702 msg._txOff = 1;
2703 msg.txFlush = 0;
2704 msg.txBreak = 0;
2705 msg.rxOn = 0;
2706 msg.rxOff = 1;
2707 msg.rxFlush = 1;
2708 msg.rxForward = 0;
2709 msg.returnStatus = 0;
2710 msg.resetDataToggle = 0;
2711 } else {
2712 /* Sending intermediate configs */
2713 msg._txOn = (!p_priv->break_on);
2714 msg._txOff = 0;
2715 msg.txFlush = 0;
2716 msg.txBreak = (p_priv->break_on);
2717 msg.rxOn = 0;
2718 msg.rxOff = 0;
2719 msg.rxFlush = 0;
2720 msg.rxForward = 0;
2721 msg.returnStatus = 0;
2722 msg.resetDataToggle = 0x0;
2723 }
2724
2725 /* Do handshaking outputs */
2726 msg.setTxTriState_setRts = 0xff;
2727 msg.txTriState_rts = p_priv->rts_state;
2728
2729 msg.setHskoa_setDtr = 0xff;
2730 msg.hskoa_dtr = p_priv->dtr_state;
2731
2732 p_priv->resend_cont = 0;
2733
2734 memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
2735
2736 /* send the data out the device on control endpoint */
2737 this_urb->transfer_buffer_length = sizeof(msg);
2738
2739 err = usb_submit_urb(this_urb, GFP_ATOMIC);
2740 if (err != 0)
2741 dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);
2742 return 0;
2743}
2744
2745static void keyspan_send_setup(struct usb_serial_port *port, int reset_port)
2746{
2747 struct usb_serial *serial = port->serial;
2748 struct keyspan_serial_private *s_priv;
2749 const struct keyspan_device_details *d_details;
2750
2751 s_priv = usb_get_serial_data(serial);
2752 d_details = s_priv->device_details;
2753
2754 switch (d_details->msg_format) {
2755 case msg_usa26:
2756 keyspan_usa26_send_setup(serial, port, reset_port);
2757 break;
2758 case msg_usa28:
2759 keyspan_usa28_send_setup(serial, port, reset_port);
2760 break;
2761 case msg_usa49:
2762 keyspan_usa49_send_setup(serial, port, reset_port);
2763 break;
2764 case msg_usa90:
2765 keyspan_usa90_send_setup(serial, port, reset_port);
2766 break;
2767 case msg_usa67:
2768 keyspan_usa67_send_setup(serial, port, reset_port);
2769 break;
2770 }
2771}
2772
2773
2774/* Gets called by the "real" driver (ie once firmware is loaded
2775 and renumeration has taken place. */
2776static int keyspan_startup(struct usb_serial *serial)
2777{
2778 int i, err;
2779 struct keyspan_serial_private *s_priv;
2780 const struct keyspan_device_details *d_details;
2781
2782 for (i = 0; (d_details = keyspan_devices[i]) != NULL; ++i)
2783 if (d_details->product_id ==
2784 le16_to_cpu(serial->dev->descriptor.idProduct))
2785 break;
2786 if (d_details == NULL) {
2787 dev_err(&serial->dev->dev, "%s - unknown product id %x\n",
2788 __func__, le16_to_cpu(serial->dev->descriptor.idProduct));
2789 return -ENODEV;
2790 }
2791
2792 /* Setup private data for serial driver */
2793 s_priv = kzalloc(sizeof(struct keyspan_serial_private), GFP_KERNEL);
2794 if (!s_priv)
2795 return -ENOMEM;
2796
2797 s_priv->instat_buf = kzalloc(INSTAT_BUFLEN, GFP_KERNEL);
2798 if (!s_priv->instat_buf)
2799 goto err_instat_buf;
2800
2801 s_priv->indat_buf = kzalloc(INDAT49W_BUFLEN, GFP_KERNEL);
2802 if (!s_priv->indat_buf)
2803 goto err_indat_buf;
2804
2805 s_priv->glocont_buf = kzalloc(GLOCONT_BUFLEN, GFP_KERNEL);
2806 if (!s_priv->glocont_buf)
2807 goto err_glocont_buf;
2808
2809 s_priv->ctrl_buf = kzalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
2810 if (!s_priv->ctrl_buf)
2811 goto err_ctrl_buf;
2812
2813 s_priv->device_details = d_details;
2814 usb_set_serial_data(serial, s_priv);
2815
2816 keyspan_setup_urbs(serial);
2817
2818 if (s_priv->instat_urb != NULL) {
2819 err = usb_submit_urb(s_priv->instat_urb, GFP_KERNEL);
2820 if (err != 0)
2821 dev_dbg(&serial->dev->dev, "%s - submit instat urb failed %d\n", __func__, err);
2822 }
2823 if (s_priv->indat_urb != NULL) {
2824 err = usb_submit_urb(s_priv->indat_urb, GFP_KERNEL);
2825 if (err != 0)
2826 dev_dbg(&serial->dev->dev, "%s - submit indat urb failed %d\n", __func__, err);
2827 }
2828
2829 return 0;
2830
2831err_ctrl_buf:
2832 kfree(s_priv->glocont_buf);
2833err_glocont_buf:
2834 kfree(s_priv->indat_buf);
2835err_indat_buf:
2836 kfree(s_priv->instat_buf);
2837err_instat_buf:
2838 kfree(s_priv);
2839
2840 return -ENOMEM;
2841}
2842
2843static void keyspan_disconnect(struct usb_serial *serial)
2844{
2845 struct keyspan_serial_private *s_priv;
2846
2847 s_priv = usb_get_serial_data(serial);
2848
2849 usb_kill_urb(s_priv->instat_urb);
2850 usb_kill_urb(s_priv->glocont_urb);
2851 usb_kill_urb(s_priv->indat_urb);
2852}
2853
2854static void keyspan_release(struct usb_serial *serial)
2855{
2856 struct keyspan_serial_private *s_priv;
2857
2858 s_priv = usb_get_serial_data(serial);
2859
2860 /* Make sure to unlink the URBs submitted in attach. */
2861 usb_kill_urb(s_priv->instat_urb);
2862 usb_kill_urb(s_priv->indat_urb);
2863
2864 usb_free_urb(s_priv->instat_urb);
2865 usb_free_urb(s_priv->indat_urb);
2866 usb_free_urb(s_priv->glocont_urb);
2867
2868 kfree(s_priv->ctrl_buf);
2869 kfree(s_priv->glocont_buf);
2870 kfree(s_priv->indat_buf);
2871 kfree(s_priv->instat_buf);
2872
2873 kfree(s_priv);
2874}
2875
2876static int keyspan_port_probe(struct usb_serial_port *port)
2877{
2878 struct usb_serial *serial = port->serial;
2879 struct keyspan_serial_private *s_priv;
2880 struct keyspan_port_private *p_priv;
2881 const struct keyspan_device_details *d_details;
2882 struct callbacks *cback;
2883 int endp;
2884 int port_num;
2885 int i;
2886
2887 s_priv = usb_get_serial_data(serial);
2888 d_details = s_priv->device_details;
2889
2890 p_priv = kzalloc(sizeof(*p_priv), GFP_KERNEL);
2891 if (!p_priv)
2892 return -ENOMEM;
2893
2894 for (i = 0; i < ARRAY_SIZE(p_priv->in_buffer); ++i) {
2895 p_priv->in_buffer[i] = kzalloc(IN_BUFLEN, GFP_KERNEL);
2896 if (!p_priv->in_buffer[i])
2897 goto err_free_in_buffer;
2898 }
2899
2900 for (i = 0; i < ARRAY_SIZE(p_priv->out_buffer); ++i) {
2901 p_priv->out_buffer[i] = kzalloc(OUT_BUFLEN, GFP_KERNEL);
2902 if (!p_priv->out_buffer[i])
2903 goto err_free_out_buffer;
2904 }
2905
2906 p_priv->inack_buffer = kzalloc(INACK_BUFLEN, GFP_KERNEL);
2907 if (!p_priv->inack_buffer)
2908 goto err_free_out_buffer;
2909
2910 p_priv->outcont_buffer = kzalloc(OUTCONT_BUFLEN, GFP_KERNEL);
2911 if (!p_priv->outcont_buffer)
2912 goto err_free_inack_buffer;
2913
2914 p_priv->device_details = d_details;
2915
2916 /* Setup values for the various callback routines */
2917 cback = &keyspan_callbacks[d_details->msg_format];
2918
2919 port_num = port->port_number;
2920
2921 /* Do indat endpoints first, once for each flip */
2922 endp = d_details->indat_endpoints[port_num];
2923 for (i = 0; i <= d_details->indat_endp_flip; ++i, ++endp) {
2924 p_priv->in_urbs[i] = keyspan_setup_urb(serial, endp,
2925 USB_DIR_IN, port,
2926 p_priv->in_buffer[i],
2927 IN_BUFLEN,
2928 cback->indat_callback);
2929 }
2930 /* outdat endpoints also have flip */
2931 endp = d_details->outdat_endpoints[port_num];
2932 for (i = 0; i <= d_details->outdat_endp_flip; ++i, ++endp) {
2933 p_priv->out_urbs[i] = keyspan_setup_urb(serial, endp,
2934 USB_DIR_OUT, port,
2935 p_priv->out_buffer[i],
2936 OUT_BUFLEN,
2937 cback->outdat_callback);
2938 }
2939 /* inack endpoint */
2940 p_priv->inack_urb = keyspan_setup_urb(serial,
2941 d_details->inack_endpoints[port_num],
2942 USB_DIR_IN, port,
2943 p_priv->inack_buffer,
2944 INACK_BUFLEN,
2945 cback->inack_callback);
2946 /* outcont endpoint */
2947 p_priv->outcont_urb = keyspan_setup_urb(serial,
2948 d_details->outcont_endpoints[port_num],
2949 USB_DIR_OUT, port,
2950 p_priv->outcont_buffer,
2951 OUTCONT_BUFLEN,
2952 cback->outcont_callback);
2953
2954 usb_set_serial_port_data(port, p_priv);
2955
2956 return 0;
2957
2958err_free_inack_buffer:
2959 kfree(p_priv->inack_buffer);
2960err_free_out_buffer:
2961 for (i = 0; i < ARRAY_SIZE(p_priv->out_buffer); ++i)
2962 kfree(p_priv->out_buffer[i]);
2963err_free_in_buffer:
2964 for (i = 0; i < ARRAY_SIZE(p_priv->in_buffer); ++i)
2965 kfree(p_priv->in_buffer[i]);
2966 kfree(p_priv);
2967
2968 return -ENOMEM;
2969}
2970
2971static void keyspan_port_remove(struct usb_serial_port *port)
2972{
2973 struct keyspan_port_private *p_priv;
2974 int i;
2975
2976 p_priv = usb_get_serial_port_data(port);
2977
2978 usb_kill_urb(p_priv->inack_urb);
2979 usb_kill_urb(p_priv->outcont_urb);
2980 for (i = 0; i < 2; i++) {
2981 usb_kill_urb(p_priv->in_urbs[i]);
2982 usb_kill_urb(p_priv->out_urbs[i]);
2983 }
2984
2985 usb_free_urb(p_priv->inack_urb);
2986 usb_free_urb(p_priv->outcont_urb);
2987 for (i = 0; i < 2; i++) {
2988 usb_free_urb(p_priv->in_urbs[i]);
2989 usb_free_urb(p_priv->out_urbs[i]);
2990 }
2991
2992 kfree(p_priv->outcont_buffer);
2993 kfree(p_priv->inack_buffer);
2994 for (i = 0; i < ARRAY_SIZE(p_priv->out_buffer); ++i)
2995 kfree(p_priv->out_buffer[i]);
2996 for (i = 0; i < ARRAY_SIZE(p_priv->in_buffer); ++i)
2997 kfree(p_priv->in_buffer[i]);
2998
2999 kfree(p_priv);
3000}
3001
3002/* Structs for the devices, pre and post renumeration. */
3003static struct usb_serial_driver keyspan_pre_device = {
3004 .driver = {
3005 .owner = THIS_MODULE,
3006 .name = "keyspan_no_firm",
3007 },
3008 .description = "Keyspan - (without firmware)",
3009 .id_table = keyspan_pre_ids,
3010 .num_ports = 1,
3011 .attach = keyspan_fake_startup,
3012};
3013
3014static struct usb_serial_driver keyspan_1port_device = {
3015 .driver = {
3016 .owner = THIS_MODULE,
3017 .name = "keyspan_1",
3018 },
3019 .description = "Keyspan 1 port adapter",
3020 .id_table = keyspan_1port_ids,
3021 .num_ports = 1,
3022 .open = keyspan_open,
3023 .close = keyspan_close,
3024 .dtr_rts = keyspan_dtr_rts,
3025 .write = keyspan_write,
3026 .write_room = keyspan_write_room,
3027 .set_termios = keyspan_set_termios,
3028 .break_ctl = keyspan_break_ctl,
3029 .tiocmget = keyspan_tiocmget,
3030 .tiocmset = keyspan_tiocmset,
3031 .attach = keyspan_startup,
3032 .disconnect = keyspan_disconnect,
3033 .release = keyspan_release,
3034 .port_probe = keyspan_port_probe,
3035 .port_remove = keyspan_port_remove,
3036};
3037
3038static struct usb_serial_driver keyspan_2port_device = {
3039 .driver = {
3040 .owner = THIS_MODULE,
3041 .name = "keyspan_2",
3042 },
3043 .description = "Keyspan 2 port adapter",
3044 .id_table = keyspan_2port_ids,
3045 .num_ports = 2,
3046 .open = keyspan_open,
3047 .close = keyspan_close,
3048 .dtr_rts = keyspan_dtr_rts,
3049 .write = keyspan_write,
3050 .write_room = keyspan_write_room,
3051 .set_termios = keyspan_set_termios,
3052 .break_ctl = keyspan_break_ctl,
3053 .tiocmget = keyspan_tiocmget,
3054 .tiocmset = keyspan_tiocmset,
3055 .attach = keyspan_startup,
3056 .disconnect = keyspan_disconnect,
3057 .release = keyspan_release,
3058 .port_probe = keyspan_port_probe,
3059 .port_remove = keyspan_port_remove,
3060};
3061
3062static struct usb_serial_driver keyspan_4port_device = {
3063 .driver = {
3064 .owner = THIS_MODULE,
3065 .name = "keyspan_4",
3066 },
3067 .description = "Keyspan 4 port adapter",
3068 .id_table = keyspan_4port_ids,
3069 .num_ports = 4,
3070 .open = keyspan_open,
3071 .close = keyspan_close,
3072 .dtr_rts = keyspan_dtr_rts,
3073 .write = keyspan_write,
3074 .write_room = keyspan_write_room,
3075 .set_termios = keyspan_set_termios,
3076 .break_ctl = keyspan_break_ctl,
3077 .tiocmget = keyspan_tiocmget,
3078 .tiocmset = keyspan_tiocmset,
3079 .attach = keyspan_startup,
3080 .disconnect = keyspan_disconnect,
3081 .release = keyspan_release,
3082 .port_probe = keyspan_port_probe,
3083 .port_remove = keyspan_port_remove,
3084};
3085
3086static struct usb_serial_driver * const serial_drivers[] = {
3087 &keyspan_pre_device, &keyspan_1port_device,
3088 &keyspan_2port_device, &keyspan_4port_device, NULL
3089};
3090
3091module_usb_serial_driver(serial_drivers, keyspan_ids_combined);
3092
3093MODULE_AUTHOR(DRIVER_AUTHOR);
3094MODULE_DESCRIPTION(DRIVER_DESC);
3095MODULE_LICENSE("GPL");
3096
3097MODULE_FIRMWARE("keyspan/usa28.fw");
3098MODULE_FIRMWARE("keyspan/usa28x.fw");
3099MODULE_FIRMWARE("keyspan/usa28xa.fw");
3100MODULE_FIRMWARE("keyspan/usa28xb.fw");
3101MODULE_FIRMWARE("keyspan/usa19.fw");
3102MODULE_FIRMWARE("keyspan/usa19qi.fw");
3103MODULE_FIRMWARE("keyspan/mpr.fw");
3104MODULE_FIRMWARE("keyspan/usa19qw.fw");
3105MODULE_FIRMWARE("keyspan/usa18x.fw");
3106MODULE_FIRMWARE("keyspan/usa19w.fw");
3107MODULE_FIRMWARE("keyspan/usa49w.fw");
3108MODULE_FIRMWARE("keyspan/usa49wlc.fw");