Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) Overkiz SAS 2012
4 *
5 * Author: Boris BREZILLON <b.brezillon@overkiz.com>
6 */
7
8#include <linux/module.h>
9#include <linux/init.h>
10#include <linux/clocksource.h>
11#include <linux/clockchips.h>
12#include <linux/interrupt.h>
13#include <linux/irq.h>
14
15#include <linux/clk.h>
16#include <linux/err.h>
17#include <linux/ioport.h>
18#include <linux/io.h>
19#include <linux/platform_device.h>
20#include <linux/pwm.h>
21#include <linux/of_device.h>
22#include <linux/slab.h>
23#include <soc/at91/atmel_tcb.h>
24
25#define NPWM 6
26
27#define ATMEL_TC_ACMR_MASK (ATMEL_TC_ACPA | ATMEL_TC_ACPC | \
28 ATMEL_TC_AEEVT | ATMEL_TC_ASWTRG)
29
30#define ATMEL_TC_BCMR_MASK (ATMEL_TC_BCPB | ATMEL_TC_BCPC | \
31 ATMEL_TC_BEEVT | ATMEL_TC_BSWTRG)
32
33struct atmel_tcb_pwm_device {
34 enum pwm_polarity polarity; /* PWM polarity */
35 unsigned div; /* PWM clock divider */
36 unsigned duty; /* PWM duty expressed in clk cycles */
37 unsigned period; /* PWM period expressed in clk cycles */
38};
39
40struct atmel_tcb_channel {
41 u32 enabled;
42 u32 cmr;
43 u32 ra;
44 u32 rb;
45 u32 rc;
46};
47
48struct atmel_tcb_pwm_chip {
49 struct pwm_chip chip;
50 spinlock_t lock;
51 struct atmel_tc *tc;
52 struct atmel_tcb_pwm_device *pwms[NPWM];
53 struct atmel_tcb_channel bkup[NPWM / 2];
54};
55
56static inline struct atmel_tcb_pwm_chip *to_tcb_chip(struct pwm_chip *chip)
57{
58 return container_of(chip, struct atmel_tcb_pwm_chip, chip);
59}
60
61static int atmel_tcb_pwm_set_polarity(struct pwm_chip *chip,
62 struct pwm_device *pwm,
63 enum pwm_polarity polarity)
64{
65 struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm);
66
67 tcbpwm->polarity = polarity;
68
69 return 0;
70}
71
72static int atmel_tcb_pwm_request(struct pwm_chip *chip,
73 struct pwm_device *pwm)
74{
75 struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
76 struct atmel_tcb_pwm_device *tcbpwm;
77 struct atmel_tc *tc = tcbpwmc->tc;
78 void __iomem *regs = tc->regs;
79 unsigned group = pwm->hwpwm / 2;
80 unsigned index = pwm->hwpwm % 2;
81 unsigned cmr;
82 int ret;
83
84 tcbpwm = devm_kzalloc(chip->dev, sizeof(*tcbpwm), GFP_KERNEL);
85 if (!tcbpwm)
86 return -ENOMEM;
87
88 ret = clk_prepare_enable(tc->clk[group]);
89 if (ret) {
90 devm_kfree(chip->dev, tcbpwm);
91 return ret;
92 }
93
94 pwm_set_chip_data(pwm, tcbpwm);
95 tcbpwm->polarity = PWM_POLARITY_NORMAL;
96 tcbpwm->duty = 0;
97 tcbpwm->period = 0;
98 tcbpwm->div = 0;
99
100 spin_lock(&tcbpwmc->lock);
101 cmr = __raw_readl(regs + ATMEL_TC_REG(group, CMR));
102 /*
103 * Get init config from Timer Counter registers if
104 * Timer Counter is already configured as a PWM generator.
105 */
106 if (cmr & ATMEL_TC_WAVE) {
107 if (index == 0)
108 tcbpwm->duty =
109 __raw_readl(regs + ATMEL_TC_REG(group, RA));
110 else
111 tcbpwm->duty =
112 __raw_readl(regs + ATMEL_TC_REG(group, RB));
113
114 tcbpwm->div = cmr & ATMEL_TC_TCCLKS;
115 tcbpwm->period = __raw_readl(regs + ATMEL_TC_REG(group, RC));
116 cmr &= (ATMEL_TC_TCCLKS | ATMEL_TC_ACMR_MASK |
117 ATMEL_TC_BCMR_MASK);
118 } else
119 cmr = 0;
120
121 cmr |= ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO | ATMEL_TC_EEVT_XC0;
122 __raw_writel(cmr, regs + ATMEL_TC_REG(group, CMR));
123 spin_unlock(&tcbpwmc->lock);
124
125 tcbpwmc->pwms[pwm->hwpwm] = tcbpwm;
126
127 return 0;
128}
129
130static void atmel_tcb_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
131{
132 struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
133 struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm);
134 struct atmel_tc *tc = tcbpwmc->tc;
135
136 clk_disable_unprepare(tc->clk[pwm->hwpwm / 2]);
137 tcbpwmc->pwms[pwm->hwpwm] = NULL;
138 devm_kfree(chip->dev, tcbpwm);
139}
140
141static void atmel_tcb_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
142{
143 struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
144 struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm);
145 struct atmel_tc *tc = tcbpwmc->tc;
146 void __iomem *regs = tc->regs;
147 unsigned group = pwm->hwpwm / 2;
148 unsigned index = pwm->hwpwm % 2;
149 unsigned cmr;
150 enum pwm_polarity polarity = tcbpwm->polarity;
151
152 /*
153 * If duty is 0 the timer will be stopped and we have to
154 * configure the output correctly on software trigger:
155 * - set output to high if PWM_POLARITY_INVERSED
156 * - set output to low if PWM_POLARITY_NORMAL
157 *
158 * This is why we're reverting polarity in this case.
159 */
160 if (tcbpwm->duty == 0)
161 polarity = !polarity;
162
163 spin_lock(&tcbpwmc->lock);
164 cmr = __raw_readl(regs + ATMEL_TC_REG(group, CMR));
165
166 /* flush old setting and set the new one */
167 if (index == 0) {
168 cmr &= ~ATMEL_TC_ACMR_MASK;
169 if (polarity == PWM_POLARITY_INVERSED)
170 cmr |= ATMEL_TC_ASWTRG_CLEAR;
171 else
172 cmr |= ATMEL_TC_ASWTRG_SET;
173 } else {
174 cmr &= ~ATMEL_TC_BCMR_MASK;
175 if (polarity == PWM_POLARITY_INVERSED)
176 cmr |= ATMEL_TC_BSWTRG_CLEAR;
177 else
178 cmr |= ATMEL_TC_BSWTRG_SET;
179 }
180
181 __raw_writel(cmr, regs + ATMEL_TC_REG(group, CMR));
182
183 /*
184 * Use software trigger to apply the new setting.
185 * If both PWM devices in this group are disabled we stop the clock.
186 */
187 if (!(cmr & (ATMEL_TC_ACPC | ATMEL_TC_BCPC))) {
188 __raw_writel(ATMEL_TC_SWTRG | ATMEL_TC_CLKDIS,
189 regs + ATMEL_TC_REG(group, CCR));
190 tcbpwmc->bkup[group].enabled = 1;
191 } else {
192 __raw_writel(ATMEL_TC_SWTRG, regs +
193 ATMEL_TC_REG(group, CCR));
194 tcbpwmc->bkup[group].enabled = 0;
195 }
196
197 spin_unlock(&tcbpwmc->lock);
198}
199
200static int atmel_tcb_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
201{
202 struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
203 struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm);
204 struct atmel_tc *tc = tcbpwmc->tc;
205 void __iomem *regs = tc->regs;
206 unsigned group = pwm->hwpwm / 2;
207 unsigned index = pwm->hwpwm % 2;
208 u32 cmr;
209 enum pwm_polarity polarity = tcbpwm->polarity;
210
211 /*
212 * If duty is 0 the timer will be stopped and we have to
213 * configure the output correctly on software trigger:
214 * - set output to high if PWM_POLARITY_INVERSED
215 * - set output to low if PWM_POLARITY_NORMAL
216 *
217 * This is why we're reverting polarity in this case.
218 */
219 if (tcbpwm->duty == 0)
220 polarity = !polarity;
221
222 spin_lock(&tcbpwmc->lock);
223 cmr = __raw_readl(regs + ATMEL_TC_REG(group, CMR));
224
225 /* flush old setting and set the new one */
226 cmr &= ~ATMEL_TC_TCCLKS;
227
228 if (index == 0) {
229 cmr &= ~ATMEL_TC_ACMR_MASK;
230
231 /* Set CMR flags according to given polarity */
232 if (polarity == PWM_POLARITY_INVERSED)
233 cmr |= ATMEL_TC_ASWTRG_CLEAR;
234 else
235 cmr |= ATMEL_TC_ASWTRG_SET;
236 } else {
237 cmr &= ~ATMEL_TC_BCMR_MASK;
238 if (polarity == PWM_POLARITY_INVERSED)
239 cmr |= ATMEL_TC_BSWTRG_CLEAR;
240 else
241 cmr |= ATMEL_TC_BSWTRG_SET;
242 }
243
244 /*
245 * If duty is 0 or equal to period there's no need to register
246 * a specific action on RA/RB and RC compare.
247 * The output will be configured on software trigger and keep
248 * this config till next config call.
249 */
250 if (tcbpwm->duty != tcbpwm->period && tcbpwm->duty > 0) {
251 if (index == 0) {
252 if (polarity == PWM_POLARITY_INVERSED)
253 cmr |= ATMEL_TC_ACPA_SET | ATMEL_TC_ACPC_CLEAR;
254 else
255 cmr |= ATMEL_TC_ACPA_CLEAR | ATMEL_TC_ACPC_SET;
256 } else {
257 if (polarity == PWM_POLARITY_INVERSED)
258 cmr |= ATMEL_TC_BCPB_SET | ATMEL_TC_BCPC_CLEAR;
259 else
260 cmr |= ATMEL_TC_BCPB_CLEAR | ATMEL_TC_BCPC_SET;
261 }
262 }
263
264 cmr |= (tcbpwm->div & ATMEL_TC_TCCLKS);
265
266 __raw_writel(cmr, regs + ATMEL_TC_REG(group, CMR));
267
268 if (index == 0)
269 __raw_writel(tcbpwm->duty, regs + ATMEL_TC_REG(group, RA));
270 else
271 __raw_writel(tcbpwm->duty, regs + ATMEL_TC_REG(group, RB));
272
273 __raw_writel(tcbpwm->period, regs + ATMEL_TC_REG(group, RC));
274
275 /* Use software trigger to apply the new setting */
276 __raw_writel(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG,
277 regs + ATMEL_TC_REG(group, CCR));
278 tcbpwmc->bkup[group].enabled = 1;
279 spin_unlock(&tcbpwmc->lock);
280 return 0;
281}
282
283static int atmel_tcb_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
284 int duty_ns, int period_ns)
285{
286 struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
287 struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm);
288 unsigned group = pwm->hwpwm / 2;
289 unsigned index = pwm->hwpwm % 2;
290 struct atmel_tcb_pwm_device *atcbpwm = NULL;
291 struct atmel_tc *tc = tcbpwmc->tc;
292 int i;
293 int slowclk = 0;
294 unsigned period;
295 unsigned duty;
296 unsigned rate = clk_get_rate(tc->clk[group]);
297 unsigned long long min;
298 unsigned long long max;
299
300 /*
301 * Find best clk divisor:
302 * the smallest divisor which can fulfill the period_ns requirements.
303 */
304 for (i = 0; i < 5; ++i) {
305 if (atmel_tc_divisors[i] == 0) {
306 slowclk = i;
307 continue;
308 }
309 min = div_u64((u64)NSEC_PER_SEC * atmel_tc_divisors[i], rate);
310 max = min << tc->tcb_config->counter_width;
311 if (max >= period_ns)
312 break;
313 }
314
315 /*
316 * If none of the divisor are small enough to represent period_ns
317 * take slow clock (32KHz).
318 */
319 if (i == 5) {
320 i = slowclk;
321 rate = clk_get_rate(tc->slow_clk);
322 min = div_u64(NSEC_PER_SEC, rate);
323 max = min << tc->tcb_config->counter_width;
324
325 /* If period is too big return ERANGE error */
326 if (max < period_ns)
327 return -ERANGE;
328 }
329
330 duty = div_u64(duty_ns, min);
331 period = div_u64(period_ns, min);
332
333 if (index == 0)
334 atcbpwm = tcbpwmc->pwms[pwm->hwpwm + 1];
335 else
336 atcbpwm = tcbpwmc->pwms[pwm->hwpwm - 1];
337
338 /*
339 * PWM devices provided by TCB driver are grouped by 2:
340 * - group 0: PWM 0 & 1
341 * - group 1: PWM 2 & 3
342 * - group 2: PWM 4 & 5
343 *
344 * PWM devices in a given group must be configured with the
345 * same period_ns.
346 *
347 * We're checking the period value of the second PWM device
348 * in this group before applying the new config.
349 */
350 if ((atcbpwm && atcbpwm->duty > 0 &&
351 atcbpwm->duty != atcbpwm->period) &&
352 (atcbpwm->div != i || atcbpwm->period != period)) {
353 dev_err(chip->dev,
354 "failed to configure period_ns: PWM group already configured with a different value\n");
355 return -EINVAL;
356 }
357
358 tcbpwm->period = period;
359 tcbpwm->div = i;
360 tcbpwm->duty = duty;
361
362 /* If the PWM is enabled, call enable to apply the new conf */
363 if (pwm_is_enabled(pwm))
364 atmel_tcb_pwm_enable(chip, pwm);
365
366 return 0;
367}
368
369static const struct pwm_ops atmel_tcb_pwm_ops = {
370 .request = atmel_tcb_pwm_request,
371 .free = atmel_tcb_pwm_free,
372 .config = atmel_tcb_pwm_config,
373 .set_polarity = atmel_tcb_pwm_set_polarity,
374 .enable = atmel_tcb_pwm_enable,
375 .disable = atmel_tcb_pwm_disable,
376 .owner = THIS_MODULE,
377};
378
379static int atmel_tcb_pwm_probe(struct platform_device *pdev)
380{
381 struct atmel_tcb_pwm_chip *tcbpwm;
382 struct device_node *np = pdev->dev.of_node;
383 struct atmel_tc *tc;
384 int err;
385 int tcblock;
386
387 err = of_property_read_u32(np, "tc-block", &tcblock);
388 if (err < 0) {
389 dev_err(&pdev->dev,
390 "failed to get Timer Counter Block number from device tree (error: %d)\n",
391 err);
392 return err;
393 }
394
395 tc = atmel_tc_alloc(tcblock);
396 if (tc == NULL) {
397 dev_err(&pdev->dev, "failed to allocate Timer Counter Block\n");
398 return -ENOMEM;
399 }
400
401 tcbpwm = devm_kzalloc(&pdev->dev, sizeof(*tcbpwm), GFP_KERNEL);
402 if (tcbpwm == NULL) {
403 err = -ENOMEM;
404 goto err_free_tc;
405 }
406
407 tcbpwm->chip.dev = &pdev->dev;
408 tcbpwm->chip.ops = &atmel_tcb_pwm_ops;
409 tcbpwm->chip.of_xlate = of_pwm_xlate_with_flags;
410 tcbpwm->chip.of_pwm_n_cells = 3;
411 tcbpwm->chip.base = -1;
412 tcbpwm->chip.npwm = NPWM;
413 tcbpwm->tc = tc;
414
415 err = clk_prepare_enable(tc->slow_clk);
416 if (err)
417 goto err_free_tc;
418
419 spin_lock_init(&tcbpwm->lock);
420
421 err = pwmchip_add(&tcbpwm->chip);
422 if (err < 0)
423 goto err_disable_clk;
424
425 platform_set_drvdata(pdev, tcbpwm);
426
427 return 0;
428
429err_disable_clk:
430 clk_disable_unprepare(tcbpwm->tc->slow_clk);
431
432err_free_tc:
433 atmel_tc_free(tc);
434
435 return err;
436}
437
438static int atmel_tcb_pwm_remove(struct platform_device *pdev)
439{
440 struct atmel_tcb_pwm_chip *tcbpwm = platform_get_drvdata(pdev);
441 int err;
442
443 clk_disable_unprepare(tcbpwm->tc->slow_clk);
444
445 err = pwmchip_remove(&tcbpwm->chip);
446 if (err < 0)
447 return err;
448
449 atmel_tc_free(tcbpwm->tc);
450
451 return 0;
452}
453
454static const struct of_device_id atmel_tcb_pwm_dt_ids[] = {
455 { .compatible = "atmel,tcb-pwm", },
456 { /* sentinel */ }
457};
458MODULE_DEVICE_TABLE(of, atmel_tcb_pwm_dt_ids);
459
460#ifdef CONFIG_PM_SLEEP
461static int atmel_tcb_pwm_suspend(struct device *dev)
462{
463 struct atmel_tcb_pwm_chip *tcbpwm = dev_get_drvdata(dev);
464 void __iomem *base = tcbpwm->tc->regs;
465 int i;
466
467 for (i = 0; i < (NPWM / 2); i++) {
468 struct atmel_tcb_channel *chan = &tcbpwm->bkup[i];
469
470 chan->cmr = readl(base + ATMEL_TC_REG(i, CMR));
471 chan->ra = readl(base + ATMEL_TC_REG(i, RA));
472 chan->rb = readl(base + ATMEL_TC_REG(i, RB));
473 chan->rc = readl(base + ATMEL_TC_REG(i, RC));
474 }
475 return 0;
476}
477
478static int atmel_tcb_pwm_resume(struct device *dev)
479{
480 struct atmel_tcb_pwm_chip *tcbpwm = dev_get_drvdata(dev);
481 void __iomem *base = tcbpwm->tc->regs;
482 int i;
483
484 for (i = 0; i < (NPWM / 2); i++) {
485 struct atmel_tcb_channel *chan = &tcbpwm->bkup[i];
486
487 writel(chan->cmr, base + ATMEL_TC_REG(i, CMR));
488 writel(chan->ra, base + ATMEL_TC_REG(i, RA));
489 writel(chan->rb, base + ATMEL_TC_REG(i, RB));
490 writel(chan->rc, base + ATMEL_TC_REG(i, RC));
491 if (chan->enabled) {
492 writel(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG,
493 base + ATMEL_TC_REG(i, CCR));
494 }
495 }
496 return 0;
497}
498#endif
499
500static SIMPLE_DEV_PM_OPS(atmel_tcb_pwm_pm_ops, atmel_tcb_pwm_suspend,
501 atmel_tcb_pwm_resume);
502
503static struct platform_driver atmel_tcb_pwm_driver = {
504 .driver = {
505 .name = "atmel-tcb-pwm",
506 .of_match_table = atmel_tcb_pwm_dt_ids,
507 .pm = &atmel_tcb_pwm_pm_ops,
508 },
509 .probe = atmel_tcb_pwm_probe,
510 .remove = atmel_tcb_pwm_remove,
511};
512module_platform_driver(atmel_tcb_pwm_driver);
513
514MODULE_AUTHOR("Boris BREZILLON <b.brezillon@overkiz.com>");
515MODULE_DESCRIPTION("Atmel Timer Counter Pulse Width Modulation Driver");
516MODULE_LICENSE("GPL v2");
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) Overkiz SAS 2012
4 *
5 * Author: Boris BREZILLON <b.brezillon@overkiz.com>
6 */
7
8#include <linux/module.h>
9#include <linux/init.h>
10#include <linux/clocksource.h>
11#include <linux/clockchips.h>
12#include <linux/interrupt.h>
13#include <linux/irq.h>
14
15#include <linux/clk.h>
16#include <linux/err.h>
17#include <linux/ioport.h>
18#include <linux/io.h>
19#include <linux/mfd/syscon.h>
20#include <linux/platform_device.h>
21#include <linux/pwm.h>
22#include <linux/of.h>
23#include <linux/regmap.h>
24#include <linux/slab.h>
25#include <soc/at91/atmel_tcb.h>
26
27#define NPWM 2
28
29#define ATMEL_TC_ACMR_MASK (ATMEL_TC_ACPA | ATMEL_TC_ACPC | \
30 ATMEL_TC_AEEVT | ATMEL_TC_ASWTRG)
31
32#define ATMEL_TC_BCMR_MASK (ATMEL_TC_BCPB | ATMEL_TC_BCPC | \
33 ATMEL_TC_BEEVT | ATMEL_TC_BSWTRG)
34
35struct atmel_tcb_pwm_device {
36 unsigned div; /* PWM clock divider */
37 unsigned duty; /* PWM duty expressed in clk cycles */
38 unsigned period; /* PWM period expressed in clk cycles */
39};
40
41struct atmel_tcb_channel {
42 u32 enabled;
43 u32 cmr;
44 u32 ra;
45 u32 rb;
46 u32 rc;
47};
48
49struct atmel_tcb_pwm_chip {
50 struct pwm_chip chip;
51 spinlock_t lock;
52 u8 channel;
53 u8 width;
54 struct regmap *regmap;
55 struct clk *clk;
56 struct clk *gclk;
57 struct clk *slow_clk;
58 struct atmel_tcb_pwm_device pwms[NPWM];
59 struct atmel_tcb_channel bkup;
60};
61
62static const u8 atmel_tcb_divisors[] = { 2, 8, 32, 128, 0, };
63
64static inline struct atmel_tcb_pwm_chip *to_tcb_chip(struct pwm_chip *chip)
65{
66 return container_of(chip, struct atmel_tcb_pwm_chip, chip);
67}
68
69static int atmel_tcb_pwm_request(struct pwm_chip *chip,
70 struct pwm_device *pwm)
71{
72 struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
73 struct atmel_tcb_pwm_device *tcbpwm = &tcbpwmc->pwms[pwm->hwpwm];
74 unsigned cmr;
75 int ret;
76
77 ret = clk_prepare_enable(tcbpwmc->clk);
78 if (ret)
79 return ret;
80
81 tcbpwm->duty = 0;
82 tcbpwm->period = 0;
83 tcbpwm->div = 0;
84
85 spin_lock(&tcbpwmc->lock);
86 regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), &cmr);
87 /*
88 * Get init config from Timer Counter registers if
89 * Timer Counter is already configured as a PWM generator.
90 */
91 if (cmr & ATMEL_TC_WAVE) {
92 if (pwm->hwpwm == 0)
93 regmap_read(tcbpwmc->regmap,
94 ATMEL_TC_REG(tcbpwmc->channel, RA),
95 &tcbpwm->duty);
96 else
97 regmap_read(tcbpwmc->regmap,
98 ATMEL_TC_REG(tcbpwmc->channel, RB),
99 &tcbpwm->duty);
100
101 tcbpwm->div = cmr & ATMEL_TC_TCCLKS;
102 regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, RC),
103 &tcbpwm->period);
104 cmr &= (ATMEL_TC_TCCLKS | ATMEL_TC_ACMR_MASK |
105 ATMEL_TC_BCMR_MASK);
106 } else
107 cmr = 0;
108
109 cmr |= ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO | ATMEL_TC_EEVT_XC0;
110 regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), cmr);
111 spin_unlock(&tcbpwmc->lock);
112
113 return 0;
114}
115
116static void atmel_tcb_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
117{
118 struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
119
120 clk_disable_unprepare(tcbpwmc->clk);
121}
122
123static void atmel_tcb_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm,
124 enum pwm_polarity polarity)
125{
126 struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
127 struct atmel_tcb_pwm_device *tcbpwm = &tcbpwmc->pwms[pwm->hwpwm];
128 unsigned cmr;
129
130 /*
131 * If duty is 0 the timer will be stopped and we have to
132 * configure the output correctly on software trigger:
133 * - set output to high if PWM_POLARITY_INVERSED
134 * - set output to low if PWM_POLARITY_NORMAL
135 *
136 * This is why we're reverting polarity in this case.
137 */
138 if (tcbpwm->duty == 0)
139 polarity = !polarity;
140
141 spin_lock(&tcbpwmc->lock);
142 regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), &cmr);
143
144 /* flush old setting and set the new one */
145 if (pwm->hwpwm == 0) {
146 cmr &= ~ATMEL_TC_ACMR_MASK;
147 if (polarity == PWM_POLARITY_INVERSED)
148 cmr |= ATMEL_TC_ASWTRG_CLEAR;
149 else
150 cmr |= ATMEL_TC_ASWTRG_SET;
151 } else {
152 cmr &= ~ATMEL_TC_BCMR_MASK;
153 if (polarity == PWM_POLARITY_INVERSED)
154 cmr |= ATMEL_TC_BSWTRG_CLEAR;
155 else
156 cmr |= ATMEL_TC_BSWTRG_SET;
157 }
158
159 regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), cmr);
160
161 /*
162 * Use software trigger to apply the new setting.
163 * If both PWM devices in this group are disabled we stop the clock.
164 */
165 if (!(cmr & (ATMEL_TC_ACPC | ATMEL_TC_BCPC))) {
166 regmap_write(tcbpwmc->regmap,
167 ATMEL_TC_REG(tcbpwmc->channel, CCR),
168 ATMEL_TC_SWTRG | ATMEL_TC_CLKDIS);
169 tcbpwmc->bkup.enabled = 1;
170 } else {
171 regmap_write(tcbpwmc->regmap,
172 ATMEL_TC_REG(tcbpwmc->channel, CCR),
173 ATMEL_TC_SWTRG);
174 tcbpwmc->bkup.enabled = 0;
175 }
176
177 spin_unlock(&tcbpwmc->lock);
178}
179
180static int atmel_tcb_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm,
181 enum pwm_polarity polarity)
182{
183 struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
184 struct atmel_tcb_pwm_device *tcbpwm = &tcbpwmc->pwms[pwm->hwpwm];
185 u32 cmr;
186
187 /*
188 * If duty is 0 the timer will be stopped and we have to
189 * configure the output correctly on software trigger:
190 * - set output to high if PWM_POLARITY_INVERSED
191 * - set output to low if PWM_POLARITY_NORMAL
192 *
193 * This is why we're reverting polarity in this case.
194 */
195 if (tcbpwm->duty == 0)
196 polarity = !polarity;
197
198 spin_lock(&tcbpwmc->lock);
199 regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), &cmr);
200
201 /* flush old setting and set the new one */
202 cmr &= ~ATMEL_TC_TCCLKS;
203
204 if (pwm->hwpwm == 0) {
205 cmr &= ~ATMEL_TC_ACMR_MASK;
206
207 /* Set CMR flags according to given polarity */
208 if (polarity == PWM_POLARITY_INVERSED)
209 cmr |= ATMEL_TC_ASWTRG_CLEAR;
210 else
211 cmr |= ATMEL_TC_ASWTRG_SET;
212 } else {
213 cmr &= ~ATMEL_TC_BCMR_MASK;
214 if (polarity == PWM_POLARITY_INVERSED)
215 cmr |= ATMEL_TC_BSWTRG_CLEAR;
216 else
217 cmr |= ATMEL_TC_BSWTRG_SET;
218 }
219
220 /*
221 * If duty is 0 or equal to period there's no need to register
222 * a specific action on RA/RB and RC compare.
223 * The output will be configured on software trigger and keep
224 * this config till next config call.
225 */
226 if (tcbpwm->duty != tcbpwm->period && tcbpwm->duty > 0) {
227 if (pwm->hwpwm == 0) {
228 if (polarity == PWM_POLARITY_INVERSED)
229 cmr |= ATMEL_TC_ACPA_SET | ATMEL_TC_ACPC_CLEAR;
230 else
231 cmr |= ATMEL_TC_ACPA_CLEAR | ATMEL_TC_ACPC_SET;
232 } else {
233 if (polarity == PWM_POLARITY_INVERSED)
234 cmr |= ATMEL_TC_BCPB_SET | ATMEL_TC_BCPC_CLEAR;
235 else
236 cmr |= ATMEL_TC_BCPB_CLEAR | ATMEL_TC_BCPC_SET;
237 }
238 }
239
240 cmr |= (tcbpwm->div & ATMEL_TC_TCCLKS);
241
242 regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), cmr);
243
244 if (pwm->hwpwm == 0)
245 regmap_write(tcbpwmc->regmap,
246 ATMEL_TC_REG(tcbpwmc->channel, RA),
247 tcbpwm->duty);
248 else
249 regmap_write(tcbpwmc->regmap,
250 ATMEL_TC_REG(tcbpwmc->channel, RB),
251 tcbpwm->duty);
252
253 regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, RC),
254 tcbpwm->period);
255
256 /* Use software trigger to apply the new setting */
257 regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CCR),
258 ATMEL_TC_SWTRG | ATMEL_TC_CLKEN);
259 tcbpwmc->bkup.enabled = 1;
260 spin_unlock(&tcbpwmc->lock);
261 return 0;
262}
263
264static int atmel_tcb_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
265 int duty_ns, int period_ns)
266{
267 struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
268 struct atmel_tcb_pwm_device *tcbpwm = &tcbpwmc->pwms[pwm->hwpwm];
269 struct atmel_tcb_pwm_device *atcbpwm = NULL;
270 int i = 0;
271 int slowclk = 0;
272 unsigned period;
273 unsigned duty;
274 unsigned rate = clk_get_rate(tcbpwmc->clk);
275 unsigned long long min;
276 unsigned long long max;
277
278 /*
279 * Find best clk divisor:
280 * the smallest divisor which can fulfill the period_ns requirements.
281 * If there is a gclk, the first divisor is actually the gclk selector
282 */
283 if (tcbpwmc->gclk)
284 i = 1;
285 for (; i < ARRAY_SIZE(atmel_tcb_divisors); ++i) {
286 if (atmel_tcb_divisors[i] == 0) {
287 slowclk = i;
288 continue;
289 }
290 min = div_u64((u64)NSEC_PER_SEC * atmel_tcb_divisors[i], rate);
291 max = min << tcbpwmc->width;
292 if (max >= period_ns)
293 break;
294 }
295
296 /*
297 * If none of the divisor are small enough to represent period_ns
298 * take slow clock (32KHz).
299 */
300 if (i == ARRAY_SIZE(atmel_tcb_divisors)) {
301 i = slowclk;
302 rate = clk_get_rate(tcbpwmc->slow_clk);
303 min = div_u64(NSEC_PER_SEC, rate);
304 max = min << tcbpwmc->width;
305
306 /* If period is too big return ERANGE error */
307 if (max < period_ns)
308 return -ERANGE;
309 }
310
311 duty = div_u64(duty_ns, min);
312 period = div_u64(period_ns, min);
313
314 if (pwm->hwpwm == 0)
315 atcbpwm = &tcbpwmc->pwms[1];
316 else
317 atcbpwm = &tcbpwmc->pwms[0];
318
319 /*
320 * PWM devices provided by the TCB driver are grouped by 2.
321 * PWM devices in a given group must be configured with the
322 * same period_ns.
323 *
324 * We're checking the period value of the second PWM device
325 * in this group before applying the new config.
326 */
327 if ((atcbpwm && atcbpwm->duty > 0 &&
328 atcbpwm->duty != atcbpwm->period) &&
329 (atcbpwm->div != i || atcbpwm->period != period)) {
330 dev_err(chip->dev,
331 "failed to configure period_ns: PWM group already configured with a different value\n");
332 return -EINVAL;
333 }
334
335 tcbpwm->period = period;
336 tcbpwm->div = i;
337 tcbpwm->duty = duty;
338
339 return 0;
340}
341
342static int atmel_tcb_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
343 const struct pwm_state *state)
344{
345 int duty_cycle, period;
346 int ret;
347
348 if (!state->enabled) {
349 atmel_tcb_pwm_disable(chip, pwm, state->polarity);
350 return 0;
351 }
352
353 period = state->period < INT_MAX ? state->period : INT_MAX;
354 duty_cycle = state->duty_cycle < INT_MAX ? state->duty_cycle : INT_MAX;
355
356 ret = atmel_tcb_pwm_config(chip, pwm, duty_cycle, period);
357 if (ret)
358 return ret;
359
360 return atmel_tcb_pwm_enable(chip, pwm, state->polarity);
361}
362
363static const struct pwm_ops atmel_tcb_pwm_ops = {
364 .request = atmel_tcb_pwm_request,
365 .free = atmel_tcb_pwm_free,
366 .apply = atmel_tcb_pwm_apply,
367};
368
369static struct atmel_tcb_config tcb_rm9200_config = {
370 .counter_width = 16,
371};
372
373static struct atmel_tcb_config tcb_sam9x5_config = {
374 .counter_width = 32,
375};
376
377static struct atmel_tcb_config tcb_sama5d2_config = {
378 .counter_width = 32,
379 .has_gclk = 1,
380};
381
382static const struct of_device_id atmel_tcb_of_match[] = {
383 { .compatible = "atmel,at91rm9200-tcb", .data = &tcb_rm9200_config, },
384 { .compatible = "atmel,at91sam9x5-tcb", .data = &tcb_sam9x5_config, },
385 { .compatible = "atmel,sama5d2-tcb", .data = &tcb_sama5d2_config, },
386 { /* sentinel */ }
387};
388
389static int atmel_tcb_pwm_probe(struct platform_device *pdev)
390{
391 const struct of_device_id *match;
392 struct atmel_tcb_pwm_chip *tcbpwm;
393 const struct atmel_tcb_config *config;
394 struct device_node *np = pdev->dev.of_node;
395 char clk_name[] = "t0_clk";
396 int err;
397 int channel;
398
399 tcbpwm = devm_kzalloc(&pdev->dev, sizeof(*tcbpwm), GFP_KERNEL);
400 if (tcbpwm == NULL)
401 return -ENOMEM;
402
403 err = of_property_read_u32(np, "reg", &channel);
404 if (err < 0) {
405 dev_err(&pdev->dev,
406 "failed to get Timer Counter Block channel from device tree (error: %d)\n",
407 err);
408 return err;
409 }
410
411 tcbpwm->regmap = syscon_node_to_regmap(np->parent);
412 if (IS_ERR(tcbpwm->regmap))
413 return PTR_ERR(tcbpwm->regmap);
414
415 tcbpwm->slow_clk = of_clk_get_by_name(np->parent, "slow_clk");
416 if (IS_ERR(tcbpwm->slow_clk))
417 return PTR_ERR(tcbpwm->slow_clk);
418
419 clk_name[1] += channel;
420 tcbpwm->clk = of_clk_get_by_name(np->parent, clk_name);
421 if (IS_ERR(tcbpwm->clk))
422 tcbpwm->clk = of_clk_get_by_name(np->parent, "t0_clk");
423 if (IS_ERR(tcbpwm->clk)) {
424 err = PTR_ERR(tcbpwm->clk);
425 goto err_slow_clk;
426 }
427
428 match = of_match_node(atmel_tcb_of_match, np->parent);
429 config = match->data;
430
431 if (config->has_gclk) {
432 tcbpwm->gclk = of_clk_get_by_name(np->parent, "gclk");
433 if (IS_ERR(tcbpwm->gclk)) {
434 err = PTR_ERR(tcbpwm->gclk);
435 goto err_clk;
436 }
437 }
438
439 tcbpwm->chip.dev = &pdev->dev;
440 tcbpwm->chip.ops = &atmel_tcb_pwm_ops;
441 tcbpwm->chip.npwm = NPWM;
442 tcbpwm->channel = channel;
443 tcbpwm->width = config->counter_width;
444
445 err = clk_prepare_enable(tcbpwm->slow_clk);
446 if (err)
447 goto err_gclk;
448
449 spin_lock_init(&tcbpwm->lock);
450
451 err = pwmchip_add(&tcbpwm->chip);
452 if (err < 0)
453 goto err_disable_clk;
454
455 platform_set_drvdata(pdev, tcbpwm);
456
457 return 0;
458
459err_disable_clk:
460 clk_disable_unprepare(tcbpwm->slow_clk);
461
462err_gclk:
463 clk_put(tcbpwm->gclk);
464
465err_clk:
466 clk_put(tcbpwm->clk);
467
468err_slow_clk:
469 clk_put(tcbpwm->slow_clk);
470
471 return err;
472}
473
474static void atmel_tcb_pwm_remove(struct platform_device *pdev)
475{
476 struct atmel_tcb_pwm_chip *tcbpwm = platform_get_drvdata(pdev);
477
478 pwmchip_remove(&tcbpwm->chip);
479
480 clk_disable_unprepare(tcbpwm->slow_clk);
481 clk_put(tcbpwm->gclk);
482 clk_put(tcbpwm->clk);
483 clk_put(tcbpwm->slow_clk);
484}
485
486static const struct of_device_id atmel_tcb_pwm_dt_ids[] = {
487 { .compatible = "atmel,tcb-pwm", },
488 { /* sentinel */ }
489};
490MODULE_DEVICE_TABLE(of, atmel_tcb_pwm_dt_ids);
491
492static int atmel_tcb_pwm_suspend(struct device *dev)
493{
494 struct atmel_tcb_pwm_chip *tcbpwm = dev_get_drvdata(dev);
495 struct atmel_tcb_channel *chan = &tcbpwm->bkup;
496 unsigned int channel = tcbpwm->channel;
497
498 regmap_read(tcbpwm->regmap, ATMEL_TC_REG(channel, CMR), &chan->cmr);
499 regmap_read(tcbpwm->regmap, ATMEL_TC_REG(channel, RA), &chan->ra);
500 regmap_read(tcbpwm->regmap, ATMEL_TC_REG(channel, RB), &chan->rb);
501 regmap_read(tcbpwm->regmap, ATMEL_TC_REG(channel, RC), &chan->rc);
502
503 return 0;
504}
505
506static int atmel_tcb_pwm_resume(struct device *dev)
507{
508 struct atmel_tcb_pwm_chip *tcbpwm = dev_get_drvdata(dev);
509 struct atmel_tcb_channel *chan = &tcbpwm->bkup;
510 unsigned int channel = tcbpwm->channel;
511
512 regmap_write(tcbpwm->regmap, ATMEL_TC_REG(channel, CMR), chan->cmr);
513 regmap_write(tcbpwm->regmap, ATMEL_TC_REG(channel, RA), chan->ra);
514 regmap_write(tcbpwm->regmap, ATMEL_TC_REG(channel, RB), chan->rb);
515 regmap_write(tcbpwm->regmap, ATMEL_TC_REG(channel, RC), chan->rc);
516
517 if (chan->enabled)
518 regmap_write(tcbpwm->regmap,
519 ATMEL_TC_CLKEN | ATMEL_TC_SWTRG,
520 ATMEL_TC_REG(channel, CCR));
521
522 return 0;
523}
524
525static DEFINE_SIMPLE_DEV_PM_OPS(atmel_tcb_pwm_pm_ops, atmel_tcb_pwm_suspend,
526 atmel_tcb_pwm_resume);
527
528static struct platform_driver atmel_tcb_pwm_driver = {
529 .driver = {
530 .name = "atmel-tcb-pwm",
531 .of_match_table = atmel_tcb_pwm_dt_ids,
532 .pm = pm_ptr(&atmel_tcb_pwm_pm_ops),
533 },
534 .probe = atmel_tcb_pwm_probe,
535 .remove_new = atmel_tcb_pwm_remove,
536};
537module_platform_driver(atmel_tcb_pwm_driver);
538
539MODULE_AUTHOR("Boris BREZILLON <b.brezillon@overkiz.com>");
540MODULE_DESCRIPTION("Atmel Timer Counter Pulse Width Modulation Driver");
541MODULE_LICENSE("GPL v2");